@polderlabs/bizar 9.0.0 → 10.0.7

package/.claude/skills/cpp-coding-standards/references/concurrency.md

@@ -1,320 +0,0 @@
-# Concurrency in Modern C++
-
-This reference covers mutexes, atomics, threads, and common concurrency patterns.
-
-## Core Principle: No Data Races
-
-A **data race** is simultaneous, unsynchronized access to the same memory location where at least one access is a write. It is **undefined behavior**.
-
-Every shared variable must be:
-1. Protected by a mutex (`std::lock_guard`), OR
-2. Declared `std::atomic`, OR
-3. Never modified concurrently (read-only after initialization)
-
-## Mutex and Lock Guards
-
-### `std::lock_guard` — Simplest Guard
-
-RAII lock — unlocks on scope exit.
-
-```cpp
-#include <mutex>
-
-std::mutex mtx;
-int counter = 0;
-
-void increment() {
-    std::lock_guard<std::mutex> lock(mtx);  // acquires lock
-    ++counter;  // safe: only one thread here at a time
-}  // destructor releases lock
-```
-
-### `std::unique_lock` — Flexible Guard
-
-Supports deferred locking, timed locking, and manual unlock.
-
-```cpp
-std::mutex mtx;
-std::unique_lock<std::mutex> lock(mtx);  // locks immediately
-lock.unlock();   // temporarily unlock
-lock.lock();     // relock
-// ...
-// automatically unlocks when lock goes out of scope
-
-// Deferred — lock is not acquired yet
-std::unique_lock<std::mutex> deferred(mtx, std::defer_lock);
-// ... other code ...
-deferred.lock();  // now lock
-deferred.unlock(); // unlock early if needed
-```
-
-### `std::scoped_lock` (C++17) — Multiple Mutexes
-
-Locks multiple mutexes without deadlock (uses the deadlock-avoidance algorithm).
-
-```cpp
-std::mutex m1, m2, m3;
-
-// GOOD: locks all three safely — avoids deadlock
-std::scoped_lock lock(m1, m2, m3);
-// ... access protected data ...
-```
-
-### The Deadlock Problem
-
-Lock mutexes in a **fixed order** if using multiple `lock_guard`/`unique_lock`. Or prefer `scoped_lock`.
-
-```cpp
-// DANGEROUS: different threads lock in opposite orders → deadlock
-void transfer(Account& from, Account& to, int amount) {
-    std::lock_guard<std::mutex> l1(from.mtx);
-    std::lock_guard<std::mutex> l2(to.mtx);  // deadlock if another thread does to→from
-    from.balance -= amount;
-    to.balance += amount;
-}
-
-// SAFE: scoped_lock locks both simultaneously
-void transfer(Account& from, Account& to, int amount) {
-    std::scoped_lock lock(from.mtx, to.mtx);  // no deadlock
-    from.balance -= amount;
-    to.balance += amount;
-}
-```
-
-## Atomics
-
-Use `std::atomic` for simple shared values where the type supports lock-free operations.
-
-```cpp
-#include <atomic>
-
-// Basic types
-std::atomic<int> counter{0};
-counter.fetch_add(1);           // returns old value
-counter++;                       // simple ops also work
-int old = counter.exchange(42);  // read and write
-
-// Memory ordering
-counter.store(1, std::memory_order_relaxed);   // only use for counters
-counter.store(1, std::memory_order_release);  // release semantics
-int x = counter.load(std::memory_order_acquire);  // acquire semantics
-
-// Default memory_order_seq_cst is safest and the default — use it unless you
-// have measured that relaxed/acq_rel gives meaningful gains
-
-// Boolean flag
-std::atomic<bool> ready{false};
-void producer() { ready.store(true, std::memory_order_release); }
-void consumer() {
-    while (!ready.load(std::memory_order_acquire)) {
-        std::this_thread::yield();
-    }
-    // consume
-}
-```
-
-## `std::atomic` with User-Defined Types
-
-A `std::atomic<T>` requires `T` to be trivially copyable and lock-free for the operations to be available.
-
-```cpp
-struct Point { int x; int y; };
-
-// std::atomic<Point> — only works if Point is trivially copyable and
-// the platform provides lock-free atomics for its size
-static_assert(std::is_trivially_copyable_v<Point>);
-static_assert(std::atomic<Point>::is_always_lock_free());
-```
-
-## Threads
-
-### `std::thread` Lifecycle — Critical Rule
-
-**Every `std::thread` must be either joined (`.join()`) or detached (`.detach()`) before destruction.** A `std::thread` that is neither joined nor detached calls `std::terminate`.
-
-```cpp
-#include <thread>
-
-void background_task(int param) { /* ... */ }
-
-// GOOD — explicit join
-std::thread t(background_task, 42);
-t.join();   // wait for completion
-
-// GOOD — detached (fire and forget, but lose ability to synchronize)
-std::thread t(background_task, 42);
-t.detach(); // thread continues running independently
-
-// DANGEROUS — terminate() called
-{
-    std::thread t(background_task, 42);
-    // t not joined or detached here
-} // std::terminate() called
-```
-
-### `std::jthread` (C++20) — Auto-Join
-
-Automatically joins on destruction. Prefer `std::jthread` over `std::thread` in C++20.
-
-```cpp
-#include <thread>
-
-void cancellable_work(std::stop_token token) {
-    while (!token.stop_requested()) {
-        do_step();
-    }
-}
-
-std::jthread jt(cancellable_work);
-// ... work happens in background ...
-// jt destroyed here → automatically requests stop and joins
-```
-
-### Stop Tokens (C++20)
-
-Gracefully stop a `jthread` without polling a flag.
-
-```cpp
-void long_task(std::stop_token token) {
-    for (size_t i = 0; i < 1000; ++i) {
-        if (token.stop_requested()) {
-            std::cout << "Stopped at " << i << '\n';
-            return;  // clean exit
-        }
-        compute_step(i);
-    }
-}
-
-std::jthread worker(long_task);
-std::this_thread::sleep_for(std::chrono::milliseconds(10));
-worker.request_stop();  // signals stop_requested()
-```
-
-## `std::condition_variable`
-
-Used to block a thread until another thread signals that a condition is true.
-
-```cpp
-#include <condition_variable>
-#include <queue>
-
-std::mutex mtx;
-std::condition_variable cv;
-std::queue<int> q;
-
-void producer() {
-    for (int i = 0; i < 10; ++i) {
-        {
-            std::lock_guard<std::mutex> lock(mtx);
-            q.push(i);
-        }
-        cv.notify_one();  // wake one waiting consumer
-    }
-}
-
-void consumer() {
-    while (true) {
-        std::unique_lock<std::mutex> lock(mtx);
-        cv.wait(lock, [&] { return !q.empty() || /* done signal */; });
-        if (q.empty()) break;  // producer done
-        int val = q.front();
-        q.pop();
-        lock.unlock();  // unlock while processing (optional)
-        // process val
-    }
-}
-```
-
-## `std::future` and `std::promise`
-
-One-shot communication from a background thread to a caller.
-
-```cpp
-#include <future>
-
-std::promise<int> p;
-std::future<int> f = p.get_future();
-
-std::thread t([&p]() {
-    // compute result
-    p.set_value(42);
-    // or on error: p.set_exception(std::make_exception_ptr(std::runtime_error("fail")));
-});
-
-int result = f.get();  // blocks until value is set
-t.join();
-```
-
-### `std::async` — Simpler Parallelism
-
-Launch a task asynchronously and get a future.
-
-```cpp
-#include <future>
-
-// LaunchPolicy::async = run in separate thread
-// LaunchPolicy::deferred = lazy evaluation in calling thread
-auto fut = std::async(std::launch::async, []() {
-    return compute_expensive_result();
-});
-
-int result = fut.get();  // blocks until ready
-```
-
-## Common Concurrency Mistakes
-
-```cpp
-// WRONG: Forgetting to protect shared data
-std::string shared;  // data race: multiple threads write
-void writer() { shared = "hello"; }
-void reader() { std::cout << shared; }
-std::thread t1(writer), t2(reader);  // DATA RACE
-
-// RIGHT: Protect with mutex
-std::mutex mtx;
-std::string shared;
-void writer() {
-    std::lock_guard<std::mutex> lock(mtx);
-    shared = "hello";
-}
-void reader() {
-    std::lock_guard<std::mutex> lock(mtx);
-    std::cout << shared;
-}
-
-// WRONG: Passing references to local variables to threads
-void bad() {
-    std::string s = "data";
-    std::thread t([&s]() { use(s); });  // reference to local — DANGER
-    t.detach();  // s destroyed, thread still uses it
-}
-
-// RIGHT: Move or copy into the thread
-void good() {
-    std::string s = "data";
-    std::thread t([s]() { use(s); });  // copy into thread's closure
-    t.join();  // or jthread
-}
-
-// WRONG: Locking a mutex and calling an unknown function (potential deadlock)
-// If the function tries to lock the same mutex → deadlock
-void dangerous(std::mutex& m) {
-    std::lock_guard<std::mutex> lock(m);
-    call_unknown_function();  // might lock m again
-}
-```
-
-## Summary Table
-
-| Primitive | Use When |
-|---|---|
-| `std::mutex` | Protect a single variable or small critical section |
-| `std::lock_guard` | Simple RAII lock (most common) |
-| `std::unique_lock` | Deferred/timed locking, condition variables |
-| `std::scoped_lock` | Locking multiple mutexes at once |
-| `std::atomic` | Simple shared counters, flags, lock-free data |
-| `std::thread` | Create a thread (remember join/detach) |
-| `std::jthread` | Thread that should auto-join and support stop tokens |
-| `std::condition_variable` | Block until a condition is signaled |
-| `std::future`/`std::promise` | One-shot result from background task |
-| `std::async` | Simple parallel task without explicit thread management |

package/.claude/skills/cpp-coding-standards/references/error-handling.md

@@ -1,229 +0,0 @@
-# Error Handling in Modern C++
-
-This reference covers when to use exceptions, error codes, or `std::expected`.
-
-## Decision Guide
-
-| Scenario | Recommended Approach |
-|---|---|
-| Constructor failure that leaves object in invalid state | Exception |
-| Expected failure (element not found, invalid input format) | `std::optional`, error code, or `std::expected` |
-| Library with many failure modes | `std::error_code` or `std::expected<T, E>` |
-| Performance-critical hot path where exceptions are unacceptable | Error codes |
-| Impossible failure (e.g., `std::terminate`) | Let it crash |
-| Memory allocation failure | `std::bad_alloc` exception (let it propagate) |
-
-**Golden rule:** Throw exceptions for *exceptional* conditions — things that should not happen in normal operation and from which the caller cannot reasonably recover. Do not use exceptions for expected failure cases (file not found, invalid user input).
-
-## Exceptions
-
-### Throwing and Catching
-
-```cpp
-#include <stdexcept>
-
-class ConfigError : public std::runtime_error {
-public:
-    explicit ConfigError(const std::string& msg) : std::runtime_error(msg) {}
-};
-
-void load_config(const std::string& path) {
-    std::ifstream in(path);
-    if (!in) {
-        throw ConfigError("Cannot open config: " + path);
-    }
-    // ...
-}
-
-// Caller
-try {
-    load_config("app.cfg");
-} catch (const ConfigError& e) {
-    std::cerr << "Config error: " << e.what() << '\n';
-} catch (const std::exception& e) {
-    std::cerr << "Unexpected: " << e.what() << '\n';
-}
-```
-
-### Constructor Failure
-
-Prefer to signal constructor failure via:
-1. A `static` factory function that returns `std::optional` or `std::expected`
-2. Throwing an exception (acceptable if construction failure is truly exceptional)
-
-```cpp
-// Approach 1: Factory returning optional
-class Widget {
-    Widget(int param) {}  // private or non-public
-public:
-    static std::optional<Widget> create(int param) {
-        if (param < 0) return std::nullopt;
-        return Widget(param);
-    }
-};
-
-// Approach 2: Exception for truly unexpected failure
-class NetworkConnection {
-public:
-    NetworkConnection(const std::string& host, int port) {
-        if (port < 0 || port > 65535)
-            throw std::invalid_argument("Invalid port: " + std::to_string(port));
-    }
-};
-```
-
-## Error Codes
-
-Traditional C-style error handling via return values. Works well in performance-sensitive code and for system-level APIs.
-
-```cpp
-#include <system_error>
-
-enum class MyError { NotFound = 1, InvalidInput, Timeout };
-
-// Return std::error_code — idiomatic C++ error code
-std::error_code read_data(const std::string& path, std::vector<char>& out) {
-    std::ifstream in(path, std::ios::binary);
-    if (!in) return std::errc::no_such_file_or_directory;
-    out.assign(std::istreambuf_iterator<char>(in), {});
-    return {};  // empty error_code = success
-}
-
-// Usage
-std::vector<char> data;
-std::error_code ec = read_data("file.bin", data);
-if (ec) {
-    std::cerr << "Read failed: " << ec.message() << '\n';
-    return;
-}
-// use data
-```
-
-## `std::expected<T, E>` (C++23)
-
-The preferred way to handle expected failures in modern C++. Available in C++23; use the `std::expected` proposal or the `tl::expected` library for C++17/20.
-
-```cpp
-// C++23 std::expected
-#include <expected>
-
-std::expected<int, std::error_code> parse_int(std::string_view s) {
-    int result = 0;
-    for (char c : s) {
-        if (!std::isdigit(c))
-            return std::unexpected(std::errc::invalid_argument);
-        result = result * 10 + (c - '0');
-    }
-    return result;
-}
-
-// Usage
-auto opt = parse_int("123abc");
-if (opt) {
-    std::cout << "Value: " << *opt << '\n';
-} else {
-    std::cerr << "Parse failed: " << opt.error().message() << '\n';
-}
-
-// Transform with .and_then (monadic interface in C++23)
-auto doubled = parse_int("42").transform([](int x) { return x * 2; });
-// doubled == 84
-```
-
-### Monadic Operations (C++23)
-
-```cpp
-// and_then — chain operations that can fail
-auto result = read_config()
-    .and_then([](const Config& c) -> std::expected<Settings, E> {
-        return validate(c);
-    })
-    .transform([](const Settings& s) {
-        return process(s);  // successful transform
-    });
-
-// or_else — handle failure
-auto with_fallback = read_config().or_else([](auto) {
-    return read_default_config();
-});
-
-// transform_error — map error type
-auto with_err_msg = parse_int("abc").transform_error([](std::errc e) {
-    return std::string(std::strerror(std::make_error_code(e).value()));
-});
-```
-
-## `std::optional` for Expected Absence
-
-When the only "failure" is that a value is not present, `std::optional` is the right tool.
-
-```cpp
-std::optional<int> find_user(const std::string& name) {
-    for (auto& [n, id] : user_db) {
-        if (n == name) return {id};
-    }
-    return std::nullopt;
-}
-
-if (auto uid = find_user("Bob")) {
-    std::cout << "User ID: " << *uid << '\n';
-} else {
-    std::cout << "User not found\n";
-}
-```
-
-## Exception Safety Guarantees
-
-Four levels of exception safety:
-
-| Level | Guarantee | Use When |
-|---|---|---|
-| **Nothrow** (`noexcept`) | Operation never throws | Move constructors, swap, essential operations |
-| **Strong** | Failed op leaves state unchanged | Most business logic |
-| **Basic** | Failed op leaves object valid | Destructors, `operator=` |
-| **No guarantee** | Any behavior on failure | Avoid |
-
-```cpp
-class Widget {
-    std::vector<int> data_;
-public:
-    // Strong exception safety — copy-on-write pattern
-    void replace(std::vector<int> new_data) {
-        std::vector<int> tmp = std::move(new_data);  // copy into temp
-        data_.swap(tmp);  // noexcept swap
-        // old data_ is in tmp, destroyed when tmp goes out of scope
-    }
-
-    // noexcept on functions that cannot fail
-    void clear() noexcept { data_.clear(); }
-    bool empty() const noexcept { return data_.empty(); }
-};
-```
-
-## noexcept — When to Use
-
-Use `noexcept` on functions that **cannot** throw by design. This enables optimizations and documents API contracts.
-
-```cpp
-// Destructors should be noexcept (the default)
-class Resource {
-    int* ptr_ = nullptr;
-public:
-    ~Resource() { delete[] ptr_; }  // implicitly noexcept
-};
-
-// Move constructors of containers are noexcept — this matters
-// A vector will use move() instead of copy() if the move ctor is noexcept
-struct Important {
-    std::vector<int> big_data;
-    Important(Important&&) noexcept = default;  // ensure noexcept
-};
-
-// Mark observers noexcept
-template <typename T>
-bool is_empty(const std::vector<T>& v) noexcept {
-    return v.empty();  // cannot throw — .empty() is noexcept
-}
-```
-
-**Do NOT mark a function `noexcept` if it can throw.** Misleading `noexcept` violates caller expectations and can cause `std::terminate` to be called unexpectedly.