@poe-platform/safe-bash 0.1.806 → 0.1.807

package/dist/safe-bash-command-ssconvert/rendering/chart/axis.d.ts

@@ -1,27 +1,2 @@
-/** Explicit-bound GogAxisMap behavior from GOffice 0.10.61 gog-axis.c.
- * Date/time formats select other bound/tick algorithms, not other transforms.
- * Bounds and spans must already have been resolved by the chart model.
- */
-export interface AxisMapRequest {
-    readonly scale: "linear" | "category" | "logarithmic";
-    readonly minimum: number;
-    readonly maximum: number;
-    readonly offset: number;
-    readonly length: number;
-    readonly inverted?: boolean;
-    readonly circular?: boolean;
-    readonly spanStart?: number;
-    readonly spanEnd?: number;
-}
-export interface AxisMap {
-    readonly valid: boolean;
-    normalized(value: number): number;
-    toView(value: number): number;
-    fromView(value: number): number;
-    derivative(value: number): number;
-    isFinite(value: number): boolean;
-    baseline(): number;
-    bounds(): readonly [number, number];
-}
-export declare function createAxisMap(request: AxisMapRequest): AxisMap;
+export * from "../../../spreadsheet-engine/rendering/chart/axis.js";
 //# sourceMappingURL=axis.d.ts.map

package/dist/safe-bash-command-ssconvert/rendering/chart/error-bar.d.ts

@@ -1,40 +1,2 @@
-import type { AxisMap } from "./axis.js";
-export interface ErrorBarData {
-    readonly type: "none" | "absolute" | "relative" | "percent";
-    /** Resolved valid series vector; absent/error entries are NaN. */
-    readonly values: readonly number[];
-    readonly positive?: readonly number[];
-    readonly negative?: readonly number[];
-}
-export interface ErrorBarBounds {
-    readonly minus: number;
-    readonly plus: number;
-}
-/** gog_error_bar_get_bounds, GOffice 0.10.61. Invalid errors are -1
- * before relative/percent scaling, which can turn the sentinel into -0.
- */
-export declare function errorBarBounds(data: ErrorBarData, index: number): ErrorBarBounds | undefined;
-export interface CartesianErrorBarRequest extends ErrorBarBounds {
-    readonly x: number;
-    readonly y: number;
-    readonly direction: "horizontal" | "vertical";
-    readonly display: "none" | "positive" | "negative" | "both";
-    readonly xMap: AxisMap;
-    readonly yMap: AxisMap;
-    /** Widths in points; renderer scale is explicit, with no host discovery. */
-    readonly capWidth: number;
-    readonly lineWidth: number;
-    readonly pointsToX: number;
-    readonly pointsToY: number;
-}
-export interface ChartSegment {
-    readonly x1: number;
-    readonly y1: number;
-    readonly x2: number;
-    readonly y2: number;
-}
-/** Cartesian branch of gog_error_bar_render. Clipping/paint is downstream;
- * no clipping to axis bounds occurs here. Polar bars require another mapping.
- */
-export declare function cartesianErrorBarSegments(request: CartesianErrorBarRequest): readonly ChartSegment[];
+export * from "../../../spreadsheet-engine/rendering/chart/error-bar.js";
 //# sourceMappingURL=error-bar.d.ts.map

package/dist/safe-bash-command-ssconvert/rendering/chart/layout.d.ts

@@ -1,25 +1,2 @@
-/** GOffice 0.10.61 go-geometry.c centered rectangles; angles in radians.
- * Font shaping/measurement is a separate explicit host capability.
- */
-export interface OrientedRectangle {
-    readonly x: number;
-    readonly y: number;
-    readonly width: number;
-    readonly height: number;
-    readonly angle: number;
-}
-export interface Rectangle {
-    readonly x: number;
-    readonly y: number;
-    readonly width: number;
-    readonly height: number;
-}
-export type LabelAnchor = "top-bottom" | "left-right";
-/** go_geometry_calc_label_position, relative to an axis tick at the origin. */
-export declare function positionLabel(box: OrientedRectangle, axisAngle: number, offset: number, side: "left" | "right", anchor?: LabelAnchor): {
-    readonly box: OrientedRectangle;
-    readonly anchor: LabelAnchor;
-};
-export declare function orientedBounds(box: OrientedRectangle): Rectangle;
-export declare function rectanglesOverlap(first: OrientedRectangle, second: OrientedRectangle): boolean;
+export * from "../../../spreadsheet-engine/rendering/chart/layout.js";
 //# sourceMappingURL=layout.d.ts.map

package/dist/safe-bash-command-ssconvert/rendering/chart/line.d.ts

@@ -1,24 +1,2 @@
-import { type CapabilityContext } from "../../contracts.js";
-import type { AxisMap } from "./axis.js";
-export type CartesianInterpolation = "linear" | "step-start" | "step-end" | "step-center-x" | "step-center-y";
-export interface CartesianSeriesRequest {
-    readonly count: number;
-    readonly x?: readonly number[];
-    readonly y?: readonly number[];
-    readonly xMap: AxisMap;
-    readonly yMap: AxisMap;
-    readonly interpolation: CartesianInterpolation;
-    readonly skipInvalid: boolean;
-}
-export interface SeriesPathCommand {
-    readonly kind: "move" | "line";
-    readonly x: number;
-    readonly y: number;
-}
-/** GOffice 0.10.61 make_path_linear (Cartesian) and xy_make_path_step.
- * Step paths have GO_PATH_OPTIONS_SHARP; callers must retain sharp corners.
- * Missing vectors use one-based indices; invalid mapped values break/skip paths.
- * Splines, polar paths, fill closure and stroke styles are separate stages.
- */
-export declare function cartesianSeriesPath(request: CartesianSeriesRequest, context: CapabilityContext): Generator<SeriesPathCommand>;
+export * from "../../../spreadsheet-engine/rendering/chart/line.js";
 //# sourceMappingURL=line.d.ts.map

package/dist/safe-bash-command-ssconvert/rendering/chart/marker.d.ts

@@ -1,36 +1,2 @@
-export type MarkerCommand = readonly ["M" | "L", number, number] | readonly ["C", number, number, number, number, number, number] | readonly ["Z"];
-declare const shapes: {
-    readonly none: readonly [];
-    readonly square: readonly MarkerCommand[];
-    readonly diamond: readonly [readonly ["M", 0, -1], readonly ["L", 1, 0], readonly ["L", 0, 1], readonly ["L", -1, 0], readonly ["Z"]];
-    readonly "triangle-down": readonly [readonly ["M", -1, -1], readonly ["L", 1, -1], readonly ["L", 0, 1], readonly ["Z"]];
-    readonly "triangle-up": readonly [readonly ["M", 0, -1], readonly ["L", 1, 1], readonly ["L", -1, 1], readonly ["Z"]];
-    readonly "triangle-right": readonly [readonly ["M", -1, -1], readonly ["L", 1, 0], readonly ["L", -1, 1], readonly ["Z"]];
-    readonly "triangle-left": readonly [readonly ["M", 1, -1], readonly ["L", -1, 0], readonly ["L", 1, 1], readonly ["Z"]];
-    readonly circle: readonly [readonly ["M", 1, 0], readonly ["C", 1, 0.56, 0.56, 1, 0, 1], readonly ["C", -0.56, 1, -1, 0.56, -1, 0], readonly ["C", -1, -0.56, -0.56, -1, 0, -1], readonly ["C", 0.56, -1, 1, -0.56, 1, 0], readonly ["L", 1, 0], readonly ["Z"]];
-    readonly x: readonly [readonly ["M", 1, 1], readonly ["L", -1, -1], readonly ["M", 1, -1], readonly ["L", -1, 1]];
-    readonly cross: readonly [readonly ["M", 1, 0], readonly ["L", -1, 0], readonly ["M", 0, 1], readonly ["L", 0, -1]];
-    readonly asterisk: readonly [readonly ["M", 0.7, 0.7], readonly ["L", -0.7, -0.7], readonly ["M", 0.7, -0.7], readonly ["L", -0.7, 0.7], readonly ["M", 1, 0], readonly ["L", -1, 0], readonly ["M", 0, 1], readonly ["L", 0, -1]];
-    readonly bar: readonly [readonly ["M", -1, -0.2], readonly ["L", 1, -0.2], readonly ["L", 1, 0.2], readonly ["L", -1, 0.2], readonly ["Z"]];
-    readonly "half-bar": readonly [readonly ["M", 0, -0.2], readonly ["L", 1, -0.2], readonly ["L", 1, 0.2], readonly ["L", 0, 0.2], readonly ["Z"]];
-    readonly butterfly: readonly [readonly ["M", -1, -1], readonly ["L", -1, 1], readonly ["L", 0, 0], readonly ["L", 1, 1], readonly ["L", 1, -1], readonly ["L", 0, 0], readonly ["Z"]];
-    readonly hourglass: readonly [readonly ["M", -1, -1], readonly ["L", 1, -1], readonly ["L", 0, 0], readonly ["L", 1, 1], readonly ["L", -1, 1], readonly ["L", 0, 0], readonly ["Z"]];
-    readonly "lefthalf-bar": readonly [readonly ["M", 0, -0.2], readonly ["L", -1, -0.2], readonly ["L", -1, 0.2], readonly ["L", 0, 0.2], readonly ["Z"]];
-};
-export type MarkerShape = keyof typeof shapes;
-export interface MarkerGeometry {
-    readonly shape: MarkerShape;
-    readonly closed: boolean;
-    readonly outline: readonly MarkerCommand[];
-    readonly fill: readonly MarkerCommand[];
-    readonly strokeWidth: number;
-    readonly lineCap: "square";
-    readonly lineJoin: "miter";
-}
-/** GOffice 0.10.61 marker path/scaling stage, independent of painting and codec.
- * Size is the resolved nonnegative native integer size. Surface pixel rounding
- * and paint/color resolution are separate stages, not approximated here.
- */
-export declare function markerGeometry(name: string, size: number, x: number, y: number, scale: number): MarkerGeometry;
-export {};
+export * from "../../../spreadsheet-engine/rendering/chart/marker.js";
 //# sourceMappingURL=marker.d.ts.map

package/dist/safe-bash-command-ssconvert/rendering/chart/pie.d.ts

@@ -1,33 +1,2 @@
-import { type CapabilityContext } from "../../contracts.js";
-/** Resolved single-ring allocation. Radius fitting, outlines, styles and labels
- * are deliberately outside this wedge stage, as in gog_pie_view_render.
- */
-export interface PieGeometryRequest {
-    readonly values: readonly number[];
-    readonly negativeMode: "skip" | "absolute" | "white";
-    readonly centerX: number;
-    readonly centerY: number;
-    readonly radius: number;
-    readonly innerRadius: number;
-    /** Combined plot/series initial angle in degrees. */
-    readonly initialAngle: number;
-    /** Plot span in percent of a full circle. */
-    readonly span: number;
-    /** Default separation as a fraction of total radius, outer ring only. */
-    readonly separation: number;
-    /** Resolved per-element separation overrides for the outer ring. */
-    readonly elementSeparation?: ReadonlyMap<number, number>;
-}
-export interface PieWedge {
-    readonly index: number;
-    readonly whiteFill: boolean;
-    readonly centerX: number;
-    readonly centerY: number;
-    readonly radius: number;
-    readonly innerRadius: number;
-    readonly startAngle: number;
-    readonly endAngle: number;
-}
-/** GOffice 0.10.61 gog_pie_series_update and wedge loop, codec independent. */
-export declare function pieWedges(request: PieGeometryRequest, context: CapabilityContext): Generator<PieWedge>;
+export * from "../../../spreadsheet-engine/rendering/chart/pie.js";
 //# sourceMappingURL=pie.d.ts.map

package/dist/safe-bash-command-ssconvert/rendering/images/index.d.ts

@@ -1,27 +1,2 @@
-import { type CapabilityContext } from "../../contracts.js";
-import type { Sheet, Workbook } from "../../workbook.js";
-import { type SheetObject } from "../../objects/index.js";
-import { type ObjectMetrics, type ObjectRectangle } from "../../objects/layout.js";
-import type { RenderingCapability } from "../../rendering.js";
-import { type ImageSurface } from "./codecs.js";
-export { imageFormats, profileImageTargets, ImageExportError } from "./formats.js";
-export { encodeGraphImage } from "./codecs.js";
-export type { ImageSurface, ImageCommand, ImagePathCommand } from "./codecs.js";
-export interface GraphSceneRequest {
-    readonly book: Workbook;
-    readonly sheet: Sheet;
-    readonly object: SheetObject;
-    readonly rectangle: ObjectRectangle;
-    readonly width: number;
-    readonly height: number;
-    readonly resolution: number;
-    readonly format: string;
-}
-export interface ImageRenderingOptions {
-    /** A JavaScript scene producer, never a native process or fallback. */
-    readonly renderGraph?: (request: GraphSceneRequest, context: CapabilityContext) => Promise<ImageSurface>;
-    readonly metrics?: (sheet: Sheet, context: CapabilityContext) => ObjectMetrics;
-}
-/** Owns graph filtering and native stable anchor order, not publication or filenames. */
-export declare function createImageRendering(options?: ImageRenderingOptions): RenderingCapability;
+export * from "../../../spreadsheet-engine/rendering/images/index.js";
 //# sourceMappingURL=index.d.ts.map

package/dist/safe-bash-command-ssconvert/rendering/print/header-footer.d.ts

@@ -1,17 +1,2 @@
-import { type CapabilityContext } from "../../contracts.js";
-export interface PrintHeaderFooterInfo {
-    readonly page: number;
-    readonly pages: number;
-    readonly sheetName: string;
-    readonly filename: string;
-    readonly path: string;
-    readonly title: string;
-    readonly timestamp?: {
-        readonly serial: number;
-        readonly dateSystem: "1900" | "1904";
-        format(serial: number, pattern: string, dateSystem: "1900" | "1904"): string;
-    };
-    cell?(reference: string, repeating: boolean): string;
-}
-export declare function renderPrintHeaderFooter(format: string, info: PrintHeaderFooterInfo, context: CapabilityContext): string;
+export * from "../../../spreadsheet-engine/rendering/print/header-footer.js";
 //# sourceMappingURL=header-footer.d.ts.map

package/dist/safe-bash-command-ssconvert/rendering/print/layout.d.ts

@@ -1,66 +1,2 @@
-import { type CapabilityContext } from "../../contracts.js";
-import type { AxisMetadata, Range } from "../../workbook.js";
-import { type AxisPrintPage, type PrintBreak } from "./pagination.js";
-export interface PrintLayoutRequest {
-    readonly area: Range;
-    readonly defaultRowPoints: number;
-    readonly defaultColumnPoints: number;
-    readonly rows?: readonly AxisMetadata[];
-    readonly columns?: readonly AxisMetadata[];
-    readonly repeatRows?: {
-        readonly start: number;
-        readonly end: number;
-    };
-    readonly repeatColumns?: {
-        readonly start: number;
-        readonly end: number;
-    };
-    readonly rowBreaks?: readonly PrintBreak[];
-    readonly columnBreaks?: readonly PrintBreak[];
-    /** Explicit paper data, including custom sizes; no ambient paper discovery. */
-    readonly paper: {
-        readonly widthPoints: number;
-        readonly heightPoints: number;
-    };
-    readonly orientation?: "portrait" | "landscape" | "reverse-portrait" | "reverse-landscape";
-    /** Top/bottom denote edges below the header and above the footer. */
-    readonly margins: {
-        readonly left: number;
-        readonly right: number;
-        readonly top: number;
-        readonly bottom: number;
-    };
-    readonly scale?: {
-        readonly kind: "percentage";
-        readonly x: number;
-        readonly y: number;
-    } | {
-        readonly kind: "fit";
-        readonly rows: number;
-        readonly columns: number;
-    };
-    readonly headings?: boolean;
-    readonly displayFormulas?: boolean;
-    readonly acrossThenDown?: boolean;
-    readonly centerHorizontally?: boolean;
-    readonly centerVertically?: boolean;
-    readonly startPage?: number;
-}
-export interface PrintPage {
-    readonly number: number;
-    readonly area: Range;
-    readonly rows: AxisPrintPage;
-    readonly columns: AxisPrintPage;
-    readonly originX: number;
-    readonly originY: number;
-}
-export interface PrintLayout {
-    readonly widthPoints: number;
-    readonly heightPoints: number;
-    readonly scaleX: number;
-    readonly scaleY: number;
-    readonly pages: readonly PrintPage[];
-}
-/** Pure page geometry from print.c compute_sheet_pages and print_page. */
-export declare function layoutPrintPages(request: PrintLayoutRequest, context: CapabilityContext): PrintLayout;
+export * from "../../../spreadsheet-engine/rendering/print/layout.js";
 //# sourceMappingURL=layout.d.ts.map

package/dist/safe-bash-command-ssconvert/rendering/print/pagination.d.ts

@@ -1,35 +1,2 @@
-import { type CapabilityContext } from "../../contracts.js";
-import type { AxisMetadata } from "../../workbook.js";
-export interface PrintBreak {
-    readonly position: number;
-    readonly type: "manual" | "auto" | "none" | "data-slice";
-}
-export interface AxisPrintRequest {
-    readonly start: number;
-    readonly end: number;
-    readonly usablePoints: number;
-    readonly defaultSizePoints: number;
-    readonly items?: readonly AxisMetadata[];
-    readonly repeat?: {
-        readonly start: number;
-        readonly end: number;
-    };
-    readonly breaks?: readonly PrintBreak[];
-}
-export interface AxisPrintPage {
-    readonly start: number;
-    readonly end: number;
-    readonly repeatStart: number;
-    readonly repeatCount: number;
-    readonly sizePoints: number;
-    readonly repeatPoints: number;
-}
-export declare function printWork(context: CapabilityContext): (amount?: number) => void;
-/** Gnumeric print.c compute_group/adjust_repetition/paginate; all sizes are points. */
-export declare function paginateAxis(request: AxisPrintRequest, context: CapabilityContext): readonly AxisPrintPage[];
-export declare function axisPaginator(request: AxisPrintRequest, tick: (amount?: number) => void): {
-    paginate: (usable: number) => readonly AxisPrintPage[];
-    fit: (pages: number, usable: number, header: number, maximum?: number) => number;
-    distance: (start: number, end: number) => number;
-};
+export * from "../../../spreadsheet-engine/rendering/print/pagination.js";
 //# sourceMappingURL=pagination.d.ts.map

package/dist/safe-bash-command-tar/create.js

@@ -1,12 +1,12 @@
 import {
   createArchive,
   manifest
-} from "../safe-bash/command-chunks/chunk-DQNDEWCI.js";
-import "../safe-bash/command-chunks/chunk-TCXM7BSZ.js";
-import "../safe-bash/command-chunks/chunk-PYIG32ZI.js";
-import "../safe-bash/command-chunks/chunk-CZLX3KVF.js";
+} from "../safe-bash/command-chunks/chunk-S65T5JJO.js";
+import "../safe-bash/command-chunks/chunk-2GILUQJY.js";
 import "../safe-bash/command-chunks/chunk-5H7ZHP7F.js";
 import "../safe-bash/command-chunks/chunk-LSYPQ2W5.js";
+import "../safe-bash/command-chunks/chunk-TCXM7BSZ.js";
+import "../safe-bash/command-chunks/chunk-PYIG32ZI.js";
 import "../safe-bash/command-chunks/chunk-65DS4IOB.js";
 export {
   createArchive,

package/dist/safe-bash-command-tar/extract.js

@@ -1,12 +1,12 @@
 import {
   extractionInput,
   readArchive
-} from "../safe-bash/command-chunks/chunk-OZHPB4KD.js";
-import "../safe-bash/command-chunks/chunk-TCXM7BSZ.js";
-import "../safe-bash/command-chunks/chunk-PYIG32ZI.js";
-import "../safe-bash/command-chunks/chunk-CZLX3KVF.js";
+} from "../safe-bash/command-chunks/chunk-OU4VE5CR.js";
+import "../safe-bash/command-chunks/chunk-2GILUQJY.js";
 import "../safe-bash/command-chunks/chunk-5H7ZHP7F.js";
 import "../safe-bash/command-chunks/chunk-LSYPQ2W5.js";
+import "../safe-bash/command-chunks/chunk-TCXM7BSZ.js";
+import "../safe-bash/command-chunks/chunk-PYIG32ZI.js";
 import "../safe-bash/command-chunks/chunk-65DS4IOB.js";
 export {
   extractionInput,

package/dist/safe-bash-command-tar/index.js

@@ -1,32 +1,32 @@
 import {
   compareArchive,
   mutateArchive
-} from "../safe-bash/command-chunks/chunk-MWNWT6HG.js";
+} from "../safe-bash/command-chunks/chunk-4XFFIKA3.js";
 import {
   createArchive,
   manifest
-} from "../safe-bash/command-chunks/chunk-DQNDEWCI.js";
+} from "../safe-bash/command-chunks/chunk-S65T5JJO.js";
 import {
   extractionInput,
   readArchive
-} from "../safe-bash/command-chunks/chunk-OZHPB4KD.js";
-import {
-  applyPax,
-  parseHeader,
-  parsePax
-} from "../safe-bash/command-chunks/chunk-TCXM7BSZ.js";
-import {
-  quoteName
-} from "../safe-bash/command-chunks/chunk-PYIG32ZI.js";
+} from "../safe-bash/command-chunks/chunk-OU4VE5CR.js";
 import {
   parseOptions
-} from "../safe-bash/command-chunks/chunk-CZLX3KVF.js";
+} from "../safe-bash/command-chunks/chunk-2GILUQJY.js";
 import {
   autodetected,
   compressed,
   recorded
 } from "../safe-bash/command-chunks/chunk-5H7ZHP7F.js";
 import "../safe-bash/command-chunks/chunk-LSYPQ2W5.js";
+import {
+  applyPax,
+  parseHeader,
+  parsePax
+} from "../safe-bash/command-chunks/chunk-TCXM7BSZ.js";
+import {
+  quoteName
+} from "../safe-bash/command-chunks/chunk-PYIG32ZI.js";
 import "../safe-bash/command-chunks/chunk-65DS4IOB.js";
 
 // packages/safe-bash-command-tar/src/index.ts
@@ -128,8 +128,10 @@ Create, read or modify USTAR/PAX archives in the virtual filesystem.
       --no-null           Read newline-delimited filenames
       --verbatim-files-from Treat file-list entries as literal filenames
       --no-verbatim-files-from Enable supported file-list directory options
-      --exclude=PATTERN   Exclude paths (place before source operands)
+      --exclude=PATTERN   Exclude paths from subsequent sources
       --exclude-caches    Keep cache directories and tags, omit other contents
+      --no-recursion      Archive subsequent directories without their contents
+      --recursion         Recurse into subsequent directories (default)
       --sort=ORDER        Order directory children by name or none (default)
   -h, --dereference       Archive symbolic-link targets during creation
   -X, --exclude-from=FILE Read newline-delimited exclusion patterns
@@ -137,7 +139,7 @@ Create, read or modify USTAR/PAX archives in the virtual filesystem.
       --no-wildcards      Select literal member names (default)
       --occurrence[=NUM]  Select only occurrence NUM of each operand (default 1)
       --strip-components=NUM Remove leading components when reading archives
-      --transform=EXPR    Substitute member names when listing (s/old/new/[gix])
+      --transform=EXPR    Substitute member names (s/old/new/[gix])
       --show-transformed-names Display transformed names in archive listings
       --format=FORMAT     Create pax (default), posix or ustar archives
       --mtime=DATE        Override creation mtime (@seconds or ISO/RFC date)

package/dist/safe-bash-command-tar/modes.js

@@ -1,14 +1,14 @@
 import {
   compareArchive,
   mutateArchive
-} from "../safe-bash/command-chunks/chunk-MWNWT6HG.js";
-import "../safe-bash/command-chunks/chunk-DQNDEWCI.js";
-import "../safe-bash/command-chunks/chunk-OZHPB4KD.js";
-import "../safe-bash/command-chunks/chunk-TCXM7BSZ.js";
-import "../safe-bash/command-chunks/chunk-PYIG32ZI.js";
-import "../safe-bash/command-chunks/chunk-CZLX3KVF.js";
+} from "../safe-bash/command-chunks/chunk-4XFFIKA3.js";
+import "../safe-bash/command-chunks/chunk-S65T5JJO.js";
+import "../safe-bash/command-chunks/chunk-OU4VE5CR.js";
+import "../safe-bash/command-chunks/chunk-2GILUQJY.js";
 import "../safe-bash/command-chunks/chunk-5H7ZHP7F.js";
 import "../safe-bash/command-chunks/chunk-LSYPQ2W5.js";
+import "../safe-bash/command-chunks/chunk-TCXM7BSZ.js";
+import "../safe-bash/command-chunks/chunk-PYIG32ZI.js";
 import "../safe-bash/command-chunks/chunk-65DS4IOB.js";
 export {
   compareArchive,

package/dist/safe-bash-command-tar/options.d.ts

@@ -4,6 +4,8 @@ import { type ArchiveLimits } from "../safe-bash-io-engine/commands/archive/inte
 export interface Operand {
     readonly name: string;
     readonly cwd: string;
+    readonly excludeCount?: number;
+    readonly recursion?: boolean;
 }
 export interface TarOptions {
     mode: "c" | "t" | "x" | "r" | "u" | "d" | "delete" | "A";
@@ -49,5 +51,5 @@ export declare class Exclusions {
     private readonly patterns;
     private work;
     constructor(patterns: readonly string[], maxWork?: number, anchored?: boolean);
-    matches(name: string): boolean;
+    matches(name: string, count?: number): boolean;
 }

package/dist/safe-bash-command-tar/options.js

@@ -1,7 +1,7 @@
 import {
   Exclusions,
   parseOptions
-} from "../safe-bash/command-chunks/chunk-CZLX3KVF.js";
+} from "../safe-bash/command-chunks/chunk-2GILUQJY.js";
 import "../safe-bash/command-chunks/chunk-LSYPQ2W5.js";
 import "../safe-bash/command-chunks/chunk-65DS4IOB.js";
 export {

package/dist/safe-bash-command-unzip/index.js

@@ -1,12 +1,12 @@
+import {
+  DEFAULT_ARCHIVE_LIMITS,
+  evalSyncUnzip
+} from "../safe-bash/command-chunks/chunk-MKYJAZ2Q.js";
 import {
   createUnzipCommand
 } from "../safe-bash/command-chunks/chunk-5GZJNSNR.js";
 import "../safe-bash/command-chunks/chunk-CDZ5VJEZ.js";
 import "../safe-bash/command-chunks/chunk-ILPEPT7O.js";
-import {
-  DEFAULT_ARCHIVE_LIMITS,
-  evalSyncUnzip
-} from "../safe-bash/command-chunks/chunk-MKYJAZ2Q.js";
 import "../safe-bash/command-chunks/chunk-65DS4IOB.js";
 
 // packages/safe-bash-command-unzip/src/index.ts

package/dist/safe-bash-command-wdiff/LICENSE

@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2026 Poe Platform
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

package/dist/safe-bash-command-wdiff/index.d.ts

@@ -0,0 +1,12 @@
+import { type CommandDefinition, type VirtualShellPlugin } from "../safe-bash-contracts/index.js";
+export interface WdiffLimits {
+    readonly maxInputBytes: number;
+    readonly maxMatrixCells: number;
+}
+export interface WdiffCommandsOptions {
+    readonly limits?: Partial<WdiffLimits>;
+    readonly replace?: boolean;
+}
+export declare function createWdiffCommand(options?: WdiffCommandsOptions): CommandDefinition;
+export declare function createWdiffCommands(options?: WdiffCommandsOptions): readonly CommandDefinition[];
+export declare function wdiffCommands(options?: WdiffCommandsOptions): VirtualShellPlugin;