@pgarbe/cdk-ecr-sync 0.5.26 → 0.5.29

package/node_modules/aws-sdk/clients/apprunner.d.ts

@@ -20,11 +20,11 @@ declare class AppRunner extends Service {
    */
   associateCustomDomain(callback?: (err: AWSError, data: AppRunner.Types.AssociateCustomDomainResponse) => void): Request<AppRunner.Types.AssociateCustomDomainResponse, AWSError>;
   /**
-   * Create an App Runner automatic scaling configuration resource. App Runner requires this resource when you create App Runner services that require non-default auto scaling settings. You can share an auto scaling configuration across multiple services. Create multiple revisions of a configuration by calling this action multiple times using the same AutoScalingConfigurationName. The call returns incremental AutoScalingConfigurationRevision values. When you create a service, you can set it to use the latest active revision of an auto scaling configuration or a specific revision. Configure a higher MinSize to increase the spread of your App Runner service over more Availability Zones in the Amazon Web Services Region. The tradeoff is a higher minimal cost. Configure a lower MaxSize to control your cost. The tradeoff is lower responsiveness during peak demand.
+   * Create an App Runner automatic scaling configuration resource. App Runner requires this resource when you create or update App Runner services and you require non-default auto scaling settings. You can share an auto scaling configuration across multiple services. Create multiple revisions of a configuration by calling this action multiple times using the same AutoScalingConfigurationName. The call returns incremental AutoScalingConfigurationRevision values. When you create a service and configure an auto scaling configuration resource, the service uses the latest active revision of the auto scaling configuration by default. You can optionally configure the service to use a specific revision. Configure a higher MinSize to increase the spread of your App Runner service over more Availability Zones in the Amazon Web Services Region. The tradeoff is a higher minimal cost. Configure a lower MaxSize to control your cost. The tradeoff is lower responsiveness during peak demand.
    */
   createAutoScalingConfiguration(params: AppRunner.Types.CreateAutoScalingConfigurationRequest, callback?: (err: AWSError, data: AppRunner.Types.CreateAutoScalingConfigurationResponse) => void): Request<AppRunner.Types.CreateAutoScalingConfigurationResponse, AWSError>;
   /**
-   * Create an App Runner automatic scaling configuration resource. App Runner requires this resource when you create App Runner services that require non-default auto scaling settings. You can share an auto scaling configuration across multiple services. Create multiple revisions of a configuration by calling this action multiple times using the same AutoScalingConfigurationName. The call returns incremental AutoScalingConfigurationRevision values. When you create a service, you can set it to use the latest active revision of an auto scaling configuration or a specific revision. Configure a higher MinSize to increase the spread of your App Runner service over more Availability Zones in the Amazon Web Services Region. The tradeoff is a higher minimal cost. Configure a lower MaxSize to control your cost. The tradeoff is lower responsiveness during peak demand.
+   * Create an App Runner automatic scaling configuration resource. App Runner requires this resource when you create or update App Runner services and you require non-default auto scaling settings. You can share an auto scaling configuration across multiple services. Create multiple revisions of a configuration by calling this action multiple times using the same AutoScalingConfigurationName. The call returns incremental AutoScalingConfigurationRevision values. When you create a service and configure an auto scaling configuration resource, the service uses the latest active revision of the auto scaling configuration by default. You can optionally configure the service to use a specific revision. Configure a higher MinSize to increase the spread of your App Runner service over more Availability Zones in the Amazon Web Services Region. The tradeoff is a higher minimal cost. Configure a lower MaxSize to control your cost. The tradeoff is lower responsiveness during peak demand.
    */
   createAutoScalingConfiguration(callback?: (err: AWSError, data: AppRunner.Types.CreateAutoScalingConfigurationResponse) => void): Request<AppRunner.Types.CreateAutoScalingConfigurationResponse, AWSError>;
   /**
@@ -35,6 +35,14 @@ declare class AppRunner extends Service {
    * Create an App Runner connection resource. App Runner requires a connection resource when you create App Runner services that access private repositories from certain third-party providers. You can share a connection across multiple services. A connection resource is needed to access GitHub repositories. GitHub requires a user interface approval process through the App Runner console before you can use the connection.
    */
   createConnection(callback?: (err: AWSError, data: AppRunner.Types.CreateConnectionResponse) => void): Request<AppRunner.Types.CreateConnectionResponse, AWSError>;
+  /**
+   * Create an App Runner observability configuration resource. App Runner requires this resource when you create or update App Runner services and you want to enable non-default observability features. You can share an observability configuration across multiple services. Create multiple revisions of a configuration by calling this action multiple times using the same ObservabilityConfigurationName. The call returns incremental ObservabilityConfigurationRevision values. When you create a service and configure an observability configuration resource, the service uses the latest active revision of the observability configuration by default. You can optionally configure the service to use a specific revision. The observability configuration resource is designed to configure multiple features (currently one feature, tracing). This action takes optional parameters that describe the configuration of these features (currently one parameter, TraceConfiguration). If you don't specify a feature parameter, App Runner doesn't enable the feature.
+   */
+  createObservabilityConfiguration(params: AppRunner.Types.CreateObservabilityConfigurationRequest, callback?: (err: AWSError, data: AppRunner.Types.CreateObservabilityConfigurationResponse) => void): Request<AppRunner.Types.CreateObservabilityConfigurationResponse, AWSError>;
+  /**
+   * Create an App Runner observability configuration resource. App Runner requires this resource when you create or update App Runner services and you want to enable non-default observability features. You can share an observability configuration across multiple services. Create multiple revisions of a configuration by calling this action multiple times using the same ObservabilityConfigurationName. The call returns incremental ObservabilityConfigurationRevision values. When you create a service and configure an observability configuration resource, the service uses the latest active revision of the observability configuration by default. You can optionally configure the service to use a specific revision. The observability configuration resource is designed to configure multiple features (currently one feature, tracing). This action takes optional parameters that describe the configuration of these features (currently one parameter, TraceConfiguration). If you don't specify a feature parameter, App Runner doesn't enable the feature.
+   */
+  createObservabilityConfiguration(callback?: (err: AWSError, data: AppRunner.Types.CreateObservabilityConfigurationResponse) => void): Request<AppRunner.Types.CreateObservabilityConfigurationResponse, AWSError>;
   /**
    * Create an App Runner service. After the service is created, the action also automatically starts a deployment. This is an asynchronous operation. On a successful call, you can use the returned OperationId and the ListOperations call to track the operation's progress.
    */
@@ -67,6 +75,14 @@ declare class AppRunner extends Service {
    * Delete an App Runner connection. You must first ensure that there are no running App Runner services that use this connection. If there are any, the DeleteConnection action fails.
    */
   deleteConnection(callback?: (err: AWSError, data: AppRunner.Types.DeleteConnectionResponse) => void): Request<AppRunner.Types.DeleteConnectionResponse, AWSError>;
+  /**
+   * Delete an App Runner observability configuration resource. You can delete a specific revision or the latest active revision. You can't delete a configuration that's used by one or more App Runner services.
+   */
+  deleteObservabilityConfiguration(params: AppRunner.Types.DeleteObservabilityConfigurationRequest, callback?: (err: AWSError, data: AppRunner.Types.DeleteObservabilityConfigurationResponse) => void): Request<AppRunner.Types.DeleteObservabilityConfigurationResponse, AWSError>;
+  /**
+   * Delete an App Runner observability configuration resource. You can delete a specific revision or the latest active revision. You can't delete a configuration that's used by one or more App Runner services.
+   */
+  deleteObservabilityConfiguration(callback?: (err: AWSError, data: AppRunner.Types.DeleteObservabilityConfigurationResponse) => void): Request<AppRunner.Types.DeleteObservabilityConfigurationResponse, AWSError>;
   /**
    * Delete an App Runner service. This is an asynchronous operation. On a successful call, you can use the returned OperationId and the ListOperations call to track the operation's progress.
    */
@@ -99,6 +115,14 @@ declare class AppRunner extends Service {
    * Return a description of custom domain names that are associated with an App Runner service.
    */
   describeCustomDomains(callback?: (err: AWSError, data: AppRunner.Types.DescribeCustomDomainsResponse) => void): Request<AppRunner.Types.DescribeCustomDomainsResponse, AWSError>;
+  /**
+   * Return a full description of an App Runner observability configuration resource.
+   */
+  describeObservabilityConfiguration(params: AppRunner.Types.DescribeObservabilityConfigurationRequest, callback?: (err: AWSError, data: AppRunner.Types.DescribeObservabilityConfigurationResponse) => void): Request<AppRunner.Types.DescribeObservabilityConfigurationResponse, AWSError>;
+  /**
+   * Return a full description of an App Runner observability configuration resource.
+   */
+  describeObservabilityConfiguration(callback?: (err: AWSError, data: AppRunner.Types.DescribeObservabilityConfigurationResponse) => void): Request<AppRunner.Types.DescribeObservabilityConfigurationResponse, AWSError>;
   /**
    * Return a full description of an App Runner service.
    */
@@ -124,11 +148,11 @@ declare class AppRunner extends Service {
    */
   disassociateCustomDomain(callback?: (err: AWSError, data: AppRunner.Types.DisassociateCustomDomainResponse) => void): Request<AppRunner.Types.DisassociateCustomDomainResponse, AWSError>;
   /**
-   * Returns a list of App Runner automatic scaling configurations in your Amazon Web Services account. You can query the revisions for a specific configuration name or the revisions for all configurations in your account. You can optionally query only the latest revision of each requested name.
+   * Returns a list of active App Runner automatic scaling configurations in your Amazon Web Services account. You can query the revisions for a specific configuration name or the revisions for all active configurations in your account. You can optionally query only the latest revision of each requested name. To retrieve a full description of a particular configuration revision, call and provide one of the ARNs returned by ListAutoScalingConfigurations.
    */
   listAutoScalingConfigurations(params: AppRunner.Types.ListAutoScalingConfigurationsRequest, callback?: (err: AWSError, data: AppRunner.Types.ListAutoScalingConfigurationsResponse) => void): Request<AppRunner.Types.ListAutoScalingConfigurationsResponse, AWSError>;
   /**
-   * Returns a list of App Runner automatic scaling configurations in your Amazon Web Services account. You can query the revisions for a specific configuration name or the revisions for all configurations in your account. You can optionally query only the latest revision of each requested name.
+   * Returns a list of active App Runner automatic scaling configurations in your Amazon Web Services account. You can query the revisions for a specific configuration name or the revisions for all active configurations in your account. You can optionally query only the latest revision of each requested name. To retrieve a full description of a particular configuration revision, call and provide one of the ARNs returned by ListAutoScalingConfigurations.
    */
   listAutoScalingConfigurations(callback?: (err: AWSError, data: AppRunner.Types.ListAutoScalingConfigurationsResponse) => void): Request<AppRunner.Types.ListAutoScalingConfigurationsResponse, AWSError>;
   /**
@@ -139,6 +163,14 @@ declare class AppRunner extends Service {
    * Returns a list of App Runner connections that are associated with your Amazon Web Services account.
    */
   listConnections(callback?: (err: AWSError, data: AppRunner.Types.ListConnectionsResponse) => void): Request<AppRunner.Types.ListConnectionsResponse, AWSError>;
+  /**
+   * Returns a list of active App Runner observability configurations in your Amazon Web Services account. You can query the revisions for a specific configuration name or the revisions for all active configurations in your account. You can optionally query only the latest revision of each requested name. To retrieve a full description of a particular configuration revision, call and provide one of the ARNs returned by ListObservabilityConfigurations.
+   */
+  listObservabilityConfigurations(params: AppRunner.Types.ListObservabilityConfigurationsRequest, callback?: (err: AWSError, data: AppRunner.Types.ListObservabilityConfigurationsResponse) => void): Request<AppRunner.Types.ListObservabilityConfigurationsResponse, AWSError>;
+  /**
+   * Returns a list of active App Runner observability configurations in your Amazon Web Services account. You can query the revisions for a specific configuration name or the revisions for all active configurations in your account. You can optionally query only the latest revision of each requested name. To retrieve a full description of a particular configuration revision, call and provide one of the ARNs returned by ListObservabilityConfigurations.
+   */
+  listObservabilityConfigurations(callback?: (err: AWSError, data: AppRunner.Types.ListObservabilityConfigurationsResponse) => void): Request<AppRunner.Types.ListObservabilityConfigurationsResponse, AWSError>;
   /**
    * Return a list of operations that occurred on an App Runner service. The resulting list of OperationSummary objects is sorted in reverse chronological order. The first object on the list represents the last started operation.
    */
@@ -277,7 +309,7 @@ declare namespace AppRunner {
      */
     AutoScalingConfigurationRevision?: Integer;
     /**
-     * It's set to true for the configuration with the highest Revision among all configurations that share the same Name. It's set to false otherwise.
+     * It's set to true for the configuration with the highest Revision among all configurations that share the same AutoScalingConfigurationName. It's set to false otherwise.
      */
     Latest?: Boolean;
     /**
@@ -487,6 +519,26 @@ declare namespace AppRunner {
      */
     Connection: Connection;
   }
+  export interface CreateObservabilityConfigurationRequest {
+    /**
+     * A name for the observability configuration. When you use it for the first time in an Amazon Web Services Region, App Runner creates revision number 1 of this name. When you use the same name in subsequent calls, App Runner creates incremental revisions of the configuration.  The name DefaultConfiguration is reserved. You can't use it to create a new observability configuration, and you can't create a revision of it. When you want to use your own observability configuration for your App Runner service, create a configuration with a different name, and then provide it when you create or update your service. 
+     */
+    ObservabilityConfigurationName: ObservabilityConfigurationName;
+    /**
+     * The configuration of the tracing feature within this observability configuration. If you don't specify it, App Runner doesn't enable tracing.
+     */
+    TraceConfiguration?: TraceConfiguration;
+    /**
+     * A list of metadata items that you can associate with your observability configuration resource. A tag is a key-value pair.
+     */
+    Tags?: TagList;
+  }
+  export interface CreateObservabilityConfigurationResponse {
+    /**
+     * A description of the App Runner observability configuration that's created by this request.
+     */
+    ObservabilityConfiguration: ObservabilityConfiguration;
+  }
   export interface CreateServiceRequest {
     /**
      * A name for the App Runner service. It must be unique across all the running App Runner services in your Amazon Web Services account in the Amazon Web Services Region.
@@ -497,7 +549,7 @@ declare namespace AppRunner {
      */
     SourceConfiguration: SourceConfiguration;
     /**
-     * The runtime configuration of instances (scaling units) of the App Runner service.
+     * The runtime configuration of instances (scaling units) of your service.
      */
     InstanceConfiguration?: InstanceConfiguration;
     /**
@@ -513,13 +565,17 @@ declare namespace AppRunner {
      */
     HealthCheckConfiguration?: HealthCheckConfiguration;
     /**
-     * The Amazon Resource Name (ARN) of an App Runner automatic scaling configuration resource that you want to associate with the App Runner service. If not provided, App Runner associates the latest revision of a default auto scaling configuration.
+     * The Amazon Resource Name (ARN) of an App Runner automatic scaling configuration resource that you want to associate with your service. If not provided, App Runner associates the latest revision of a default auto scaling configuration. Specify an ARN with a name and a revision number to associate that revision. For example: arn:aws:apprunner:us-east-1:123456789012:autoscalingconfiguration/high-availability/3  Specify just the name to associate the latest revision. For example: arn:aws:apprunner:us-east-1:123456789012:autoscalingconfiguration/high-availability 
      */
     AutoScalingConfigurationArn?: AppRunnerResourceArn;
     /**
      * Configuration settings related to network traffic of the web application that the App Runner service runs.
      */
     NetworkConfiguration?: NetworkConfiguration;
+    /**
+     * The observability configuration of your service.
+     */
+    ObservabilityConfiguration?: ServiceObservabilityConfiguration;
   }
   export interface CreateServiceResponse {
     /**
@@ -599,6 +655,18 @@ declare namespace AppRunner {
      */
     Connection?: Connection;
   }
+  export interface DeleteObservabilityConfigurationRequest {
+    /**
+     * The Amazon Resource Name (ARN) of the App Runner observability configuration that you want to delete. The ARN can be a full observability configuration ARN, or a partial ARN ending with either .../name  or .../name/revision . If a revision isn't specified, the latest active revision is deleted.
+     */
+    ObservabilityConfigurationArn: AppRunnerResourceArn;
+  }
+  export interface DeleteObservabilityConfigurationResponse {
+    /**
+     * A description of the App Runner observability configuration that this request just deleted.
+     */
+    ObservabilityConfiguration: ObservabilityConfiguration;
+  }
   export interface DeleteServiceRequest {
     /**
      * The Amazon Resource Name (ARN) of the App Runner service that you want to delete.
@@ -672,6 +740,18 @@ declare namespace AppRunner {
      */
     NextToken?: String;
   }
+  export interface DescribeObservabilityConfigurationRequest {
+    /**
+     * The Amazon Resource Name (ARN) of the App Runner observability configuration that you want a description for. The ARN can be a full observability configuration ARN, or a partial ARN ending with either .../name  or .../name/revision . If a revision isn't specified, the latest active revision is described.
+     */
+    ObservabilityConfigurationArn: AppRunnerResourceArn;
+  }
+  export interface DescribeObservabilityConfigurationResponse {
+    /**
+     * A full description of the App Runner observability configuration that you specified in this request.
+     */
+    ObservabilityConfiguration: ObservabilityConfiguration;
+  }
   export interface DescribeServiceRequest {
     /**
      * The Amazon Resource Name (ARN) of the App Runner service that you want a description for.
@@ -818,11 +898,11 @@ declare namespace AppRunner {
   export type KmsKeyArn = string;
   export interface ListAutoScalingConfigurationsRequest {
     /**
-     * The name of the App Runner auto scaling configuration that you want to list. If specified, App Runner lists revisions that share this name. If not specified, App Runner returns revisions of all configurations.
+     * The name of the App Runner auto scaling configuration that you want to list. If specified, App Runner lists revisions that share this name. If not specified, App Runner returns revisions of all active configurations.
      */
     AutoScalingConfigurationName?: AutoScalingConfigurationName;
     /**
-     * Set to true to list only the latest revision for each requested configuration name. Keep as false to list all revisions for each requested configuration name. Default: false 
+     * Set to true to list only the latest revision for each requested configuration name. Set to false to list all revisions for each requested configuration name. Default: true 
      */
     LatestOnly?: Boolean;
     /**
@@ -868,6 +948,34 @@ declare namespace AppRunner {
      */
     NextToken?: NextToken;
   }
+  export interface ListObservabilityConfigurationsRequest {
+    /**
+     * The name of the App Runner observability configuration that you want to list. If specified, App Runner lists revisions that share this name. If not specified, App Runner returns revisions of all active configurations.
+     */
+    ObservabilityConfigurationName?: ObservabilityConfigurationName;
+    /**
+     * Set to true to list only the latest revision for each requested configuration name. Set to false to list all revisions for each requested configuration name. Default: true 
+     */
+    LatestOnly?: Boolean;
+    /**
+     * The maximum number of results to include in each response (result page). It's used for a paginated request. If you don't specify MaxResults, the request retrieves all available results in a single response.
+     */
+    MaxResults?: MaxResults;
+    /**
+     * A token from a previous result page. It's used for a paginated request. The request retrieves the next result page. All other parameter values must be identical to the ones that are specified in the initial request. If you don't specify NextToken, the request retrieves the first result page.
+     */
+    NextToken?: NextToken;
+  }
+  export interface ListObservabilityConfigurationsResponse {
+    /**
+     * A list of summary information records for observability configurations. In a paginated request, the request returns up to MaxResults records for each call.
+     */
+    ObservabilityConfigurationSummaryList: ObservabilityConfigurationSummaryList;
+    /**
+     * The token that you can pass in a subsequent request to get the next result page. It's returned in a paginated request.
+     */
+    NextToken?: NextToken;
+  }
   export type ListOperationsMaxResults = number;
   export interface ListOperationsRequest {
     /**
@@ -955,6 +1063,57 @@ declare namespace AppRunner {
   }
   export type NextToken = string;
   export type NullableBoolean = boolean;
+  export interface ObservabilityConfiguration {
+    /**
+     * The Amazon Resource Name (ARN) of this observability configuration.
+     */
+    ObservabilityConfigurationArn?: AppRunnerResourceArn;
+    /**
+     * The customer-provided observability configuration name. It can be used in multiple revisions of a configuration.
+     */
+    ObservabilityConfigurationName?: ObservabilityConfigurationName;
+    /**
+     * The configuration of the tracing feature within this observability configuration. If not specified, tracing isn't enabled.
+     */
+    TraceConfiguration?: TraceConfiguration;
+    /**
+     * The revision of this observability configuration. It's unique among all the active configurations ("Status": "ACTIVE") that share the same ObservabilityConfigurationName.
+     */
+    ObservabilityConfigurationRevision?: Integer;
+    /**
+     * It's set to true for the configuration with the highest Revision among all configurations that share the same ObservabilityConfigurationName. It's set to false otherwise.
+     */
+    Latest?: Boolean;
+    /**
+     * The current state of the observability configuration. If the status of a configuration revision is INACTIVE, it was deleted and can't be used. Inactive configuration revisions are permanently removed some time after they are deleted.
+     */
+    Status?: ObservabilityConfigurationStatus;
+    /**
+     * The time when the observability configuration was created. It's in Unix time stamp format.
+     */
+    CreatedAt?: Timestamp;
+    /**
+     * The time when the observability configuration was deleted. It's in Unix time stamp format.
+     */
+    DeletedAt?: Timestamp;
+  }
+  export type ObservabilityConfigurationName = string;
+  export type ObservabilityConfigurationStatus = "ACTIVE"|"INACTIVE"|string;
+  export interface ObservabilityConfigurationSummary {
+    /**
+     * The Amazon Resource Name (ARN) of this observability configuration.
+     */
+    ObservabilityConfigurationArn?: AppRunnerResourceArn;
+    /**
+     * The customer-provided observability configuration name. It can be used in multiple revisions of a configuration.
+     */
+    ObservabilityConfigurationName?: ObservabilityConfigurationName;
+    /**
+     * The revision of this observability configuration. It's unique among all the active configurations ("Status": "ACTIVE") that share the same ObservabilityConfigurationName.
+     */
+    ObservabilityConfigurationRevision?: Integer;
+  }
+  export type ObservabilityConfigurationSummaryList = ObservabilityConfigurationSummary[];
   export type OperationStatus = "PENDING"|"IN_PROGRESS"|"FAILED"|"SUCCEEDED"|"ROLLBACK_IN_PROGRESS"|"ROLLBACK_FAILED"|"ROLLBACK_SUCCEEDED"|string;
   export interface OperationSummary {
     /**
@@ -1022,7 +1181,7 @@ declare namespace AppRunner {
     OperationId?: UUID;
   }
   export type RoleArn = string;
-  export type Runtime = "PYTHON_3"|"NODEJS_12"|string;
+  export type Runtime = "PYTHON_3"|"NODEJS_12"|"NODEJS_14"|"CORRETTO_8"|"CORRETTO_11"|string;
   export type RuntimeEnvironmentVariables = {[key: string]: RuntimeEnvironmentVariablesValue};
   export type RuntimeEnvironmentVariablesKey = string;
   export type RuntimeEnvironmentVariablesValue = string;
@@ -1083,10 +1242,24 @@ declare namespace AppRunner {
      * Configuration settings related to network traffic of the web application that this service runs.
      */
     NetworkConfiguration: NetworkConfiguration;
+    /**
+     * The observability configuration of this service.
+     */
+    ObservabilityConfiguration?: ServiceObservabilityConfiguration;
   }
   export type ServiceId = string;
   export type ServiceMaxResults = number;
   export type ServiceName = string;
+  export interface ServiceObservabilityConfiguration {
+    /**
+     * When true, an observability configuration resource is associated with the service, and an ObservabilityConfigurationArn is specified.
+     */
+    ObservabilityEnabled: Boolean;
+    /**
+     * The Amazon Resource Name (ARN) of the observability configuration that is associated with the service. Specified only when ObservabilityEnabled is true. Specify an ARN with a name and a revision number to associate that revision. For example: arn:aws:apprunner:us-east-1:123456789012:observabilityconfiguration/xray-tracing/3  Specify just the name to associate the latest revision. For example: arn:aws:apprunner:us-east-1:123456789012:observabilityconfiguration/xray-tracing 
+     */
+    ObservabilityConfigurationArn?: AppRunnerResourceArn;
+  }
   export type ServiceStatus = "CREATE_FAILED"|"RUNNING"|"DELETED"|"DELETE_FAILED"|"PAUSED"|"OPERATION_IN_PROGRESS"|string;
   export interface ServiceSummary {
     /**
@@ -1190,6 +1363,13 @@ declare namespace AppRunner {
   }
   export type TagValue = string;
   export type Timestamp = Date;
+  export interface TraceConfiguration {
+    /**
+     * The implementation provider chosen for tracing App Runner services.
+     */
+    Vendor: TracingVendor;
+  }
+  export type TracingVendor = "AWSXRAY"|string;
   export type UUID = string;
   export interface UntagResourceRequest {
     /**
@@ -1213,7 +1393,7 @@ declare namespace AppRunner {
      */
     SourceConfiguration?: SourceConfiguration;
     /**
-     * The runtime configuration to apply to instances (scaling units) of the App Runner service.
+     * The runtime configuration to apply to instances (scaling units) of your service.
      */
     InstanceConfiguration?: InstanceConfiguration;
     /**
@@ -1228,6 +1408,10 @@ declare namespace AppRunner {
      * Configuration settings related to network traffic of the web application that the App Runner service runs.
      */
     NetworkConfiguration?: NetworkConfiguration;
+    /**
+     * The observability configuration of your service.
+     */
+    ObservabilityConfiguration?: ServiceObservabilityConfiguration;
   }
   export interface UpdateServiceResponse {
     /**

package/node_modules/aws-sdk/clients/appstream.d.ts

@@ -1031,6 +1031,10 @@ declare namespace AppStream {
      * The USB device filter strings that specify which USB devices a user can redirect to the fleet streaming session, when using the Windows native client. This is allowed but not required for Elastic fleets.
      */
     UsbDeviceFilterStrings?: UsbDeviceFilterStrings;
+    /**
+     * The S3 location of the session scripts configuration zip file. This only applies to Elastic fleets.
+     */
+    SessionScriptS3Location?: S3Location;
   }
   export interface CreateFleetResult {
     /**
@@ -2000,8 +2004,12 @@ declare namespace AppStream {
      * The USB device filter strings associated with the fleet.
      */
     UsbDeviceFilterStrings?: UsbDeviceFilterStrings;
+    /**
+     * The S3 location of the session scripts configuration zip file. This only applies to Elastic fleets.
+     */
+    SessionScriptS3Location?: S3Location;
   }
-  export type FleetAttribute = "VPC_CONFIGURATION"|"VPC_CONFIGURATION_SECURITY_GROUP_IDS"|"DOMAIN_JOIN_INFO"|"IAM_ROLE_ARN"|"USB_DEVICE_FILTER_STRINGS"|string;
+  export type FleetAttribute = "VPC_CONFIGURATION"|"VPC_CONFIGURATION_SECURITY_GROUP_IDS"|"DOMAIN_JOIN_INFO"|"IAM_ROLE_ARN"|"USB_DEVICE_FILTER_STRINGS"|"SESSION_SCRIPT_S3_LOCATION"|string;
   export type FleetAttributes = FleetAttribute[];
   export interface FleetError {
     /**
@@ -2756,6 +2764,10 @@ declare namespace AppStream {
      * The USB device filter strings that specify which USB devices a user can redirect to the fleet streaming session, when using the Windows native client. This is allowed but not required for Elastic fleets.
      */
     UsbDeviceFilterStrings?: UsbDeviceFilterStrings;
+    /**
+     * The S3 location of the session scripts configuration zip file. This only applies to Elastic fleets. 
+     */
+    SessionScriptS3Location?: S3Location;
   }
   export interface UpdateFleetResult {
     /**

package/node_modules/aws-sdk/clients/athena.d.ts

@@ -132,11 +132,11 @@ declare class Athena extends Service {
    */
   getQueryExecution(callback?: (err: AWSError, data: Athena.Types.GetQueryExecutionOutput) => void): Request<Athena.Types.GetQueryExecutionOutput, AWSError>;
   /**
-   * Streams the results of a single query execution specified by QueryExecutionId from the Athena query results location in Amazon S3. For more information, see Query Results in the Amazon Athena User Guide. This request does not execute the query but returns results. Use StartQueryExecution to run a query. If the original query execution ran using an ResultConfiguration$ExpectedBucketOwner setting, the setting also applies to Amazon S3 read operations when GetQueryResults is called. If an expected bucket owner has been specified and the query results are in an Amazon S3 bucket whose owner account ID is different from the expected bucket owner, the GetQueryResults call fails with an Amazon S3 permissions error. To stream query results successfully, the IAM principal with permission to call GetQueryResults also must have permissions to the Amazon S3 GetObject action for the Athena query results location.  IAM principals with permission to the Amazon S3 GetObject action for the query results location are able to retrieve query results from Amazon S3 even if permission to the GetQueryResults action is denied. To restrict user or role access, ensure that Amazon S3 permissions to the Athena query location are denied. 
+   * Streams the results of a single query execution specified by QueryExecutionId from the Athena query results location in Amazon S3. For more information, see Query Results in the Amazon Athena User Guide. This request does not execute the query but returns results. Use StartQueryExecution to run a query. To stream query results successfully, the IAM principal with permission to call GetQueryResults also must have permissions to the Amazon S3 GetObject action for the Athena query results location.  IAM principals with permission to the Amazon S3 GetObject action for the query results location are able to retrieve query results from Amazon S3 even if permission to the GetQueryResults action is denied. To restrict user or role access, ensure that Amazon S3 permissions to the Athena query location are denied. 
    */
   getQueryResults(params: Athena.Types.GetQueryResultsInput, callback?: (err: AWSError, data: Athena.Types.GetQueryResultsOutput) => void): Request<Athena.Types.GetQueryResultsOutput, AWSError>;
   /**
-   * Streams the results of a single query execution specified by QueryExecutionId from the Athena query results location in Amazon S3. For more information, see Query Results in the Amazon Athena User Guide. This request does not execute the query but returns results. Use StartQueryExecution to run a query. If the original query execution ran using an ResultConfiguration$ExpectedBucketOwner setting, the setting also applies to Amazon S3 read operations when GetQueryResults is called. If an expected bucket owner has been specified and the query results are in an Amazon S3 bucket whose owner account ID is different from the expected bucket owner, the GetQueryResults call fails with an Amazon S3 permissions error. To stream query results successfully, the IAM principal with permission to call GetQueryResults also must have permissions to the Amazon S3 GetObject action for the Athena query results location.  IAM principals with permission to the Amazon S3 GetObject action for the query results location are able to retrieve query results from Amazon S3 even if permission to the GetQueryResults action is denied. To restrict user or role access, ensure that Amazon S3 permissions to the Athena query location are denied. 
+   * Streams the results of a single query execution specified by QueryExecutionId from the Athena query results location in Amazon S3. For more information, see Query Results in the Amazon Athena User Guide. This request does not execute the query but returns results. Use StartQueryExecution to run a query. To stream query results successfully, the IAM principal with permission to call GetQueryResults also must have permissions to the Amazon S3 GetObject action for the Athena query results location.  IAM principals with permission to the Amazon S3 GetObject action for the query results location are able to retrieve query results from Amazon S3 even if permission to the GetQueryResults action is denied. To restrict user or role access, ensure that Amazon S3 permissions to the Athena query location are denied. 
    */
   getQueryResults(callback?: (err: AWSError, data: Athena.Types.GetQueryResultsOutput) => void): Request<Athena.Types.GetQueryResultsOutput, AWSError>;
   /**
@@ -267,6 +267,14 @@ declare class Athena extends Service {
    * Updates the data catalog that has the specified name.
    */
   updateDataCatalog(callback?: (err: AWSError, data: Athena.Types.UpdateDataCatalogOutput) => void): Request<Athena.Types.UpdateDataCatalogOutput, AWSError>;
+  /**
+   * Updates a NamedQuery object. The database or workgroup cannot be updated.
+   */
+  updateNamedQuery(params: Athena.Types.UpdateNamedQueryInput, callback?: (err: AWSError, data: Athena.Types.UpdateNamedQueryOutput) => void): Request<Athena.Types.UpdateNamedQueryOutput, AWSError>;
+  /**
+   * Updates a NamedQuery object. The database or workgroup cannot be updated.
+   */
+  updateNamedQuery(callback?: (err: AWSError, data: Athena.Types.UpdateNamedQueryOutput) => void): Request<Athena.Types.UpdateNamedQueryOutput, AWSError>;
   /**
    * Updates a prepared statement.
    */
@@ -285,12 +293,30 @@ declare class Athena extends Service {
   updateWorkGroup(callback?: (err: AWSError, data: Athena.Types.UpdateWorkGroupOutput) => void): Request<Athena.Types.UpdateWorkGroupOutput, AWSError>;
 }
 declare namespace Athena {
+  export interface AclConfiguration {
+    /**
+     * The Amazon S3 canned ACL that Athena should specify when storing query results. Currently the only supported canned ACL is BUCKET_OWNER_FULL_CONTROL. If a query runs in a workgroup and the workgroup overrides client-side settings, then the Amazon S3 canned ACL specified in the workgroup's settings is used for all queries that run in the workgroup. For more information about Amazon S3 canned ACLs, see Canned ACL in the Amazon S3 User Guide.
+     */
+    S3AclOption: S3AclOption;
+  }
   export type AmazonResourceName = string;
   export interface AthenaError {
     /**
-     * An integer value that specifies the category of a query failure error. The following list shows the category for each integer value.  1 - System  2 - User  3 - Unknown
+     * An integer value that specifies the category of a query failure error. The following list shows the category for each integer value.  1 - System  2 - User  3 - Other
      */
     ErrorCategory?: ErrorCategory;
+    /**
+     * An integer value that provides specific information about an Athena query error. For the meaning of specific values, see the Error Type Reference in the Amazon Athena User Guide.
+     */
+    ErrorType?: ErrorType;
+    /**
+     * True if the query might succeed if resubmitted.
+     */
+    Retryable?: Boolean;
+    /**
+     * Contains a short description of the error that occurred.
+     */
+    ErrorMessage?: String;
   }
   export interface BatchGetNamedQueryInput {
     /**
@@ -580,11 +606,11 @@ declare namespace Athena {
   export type DescriptionString = string;
   export interface EncryptionConfiguration {
     /**
-     * Indicates whether Amazon S3 server-side encryption with Amazon S3-managed keys (SSE-S3), server-side encryption with KMS-managed keys (SSE-KMS), or client-side encryption with KMS-managed keys (CSE-KMS) is used. If a query runs in a workgroup and the workgroup overrides client-side settings, then the workgroup's setting for encryption is used. It specifies whether query results must be encrypted, for all queries that run in this workgroup. 
+     * Indicates whether Amazon S3 server-side encryption with Amazon S3-managed keys (SSE_S3), server-side encryption with KMS-managed keys (SSE_KMS), or client-side encryption with KMS-managed keys (CSE_KMS) is used. If a query runs in a workgroup and the workgroup overrides client-side settings, then the workgroup's setting for encryption is used. It specifies whether query results must be encrypted, for all queries that run in this workgroup. 
      */
     EncryptionOption: EncryptionOption;
     /**
-     * For SSE-KMS and CSE-KMS, this is the KMS key ARN or ID.
+     * For SSE_KMS and CSE_KMS, this is the KMS key ARN or ID.
      */
     KmsKey?: String;
   }
@@ -603,6 +629,7 @@ declare namespace Athena {
   export type ErrorCategory = number;
   export type ErrorCode = string;
   export type ErrorMessage = string;
+  export type ErrorType = number;
   export type ExpressionString = string;
   export interface GetDataCatalogInput {
     /**
@@ -973,7 +1000,7 @@ declare namespace Athena {
      */
     Database: DatabaseString;
     /**
-     * The SQL query statements that comprise the query.
+     * The SQL statements that make up the query.
      */
     QueryString: QueryString;
     /**
@@ -985,6 +1012,7 @@ declare namespace Athena {
      */
     WorkGroup?: WorkGroupName;
   }
+  export type NamedQueryDescriptionString = string;
   export type NamedQueryId = string;
   export type NamedQueryIdList = NamedQueryId[];
   export type NamedQueryList = NamedQuery[];
@@ -1134,13 +1162,17 @@ declare namespace Athena {
      */
     OutputLocation?: String;
     /**
-     * If query results are encrypted in Amazon S3, indicates the encryption option used (for example, SSE-KMS or CSE-KMS) and key information. This is a client-side setting. If workgroup settings override client-side settings, then the query uses the encryption configuration that is specified for the workgroup, and also uses the location for storing query results specified in the workgroup. See WorkGroupConfiguration$EnforceWorkGroupConfiguration and Workgroup Settings Override Client-Side Settings.
+     * If query results are encrypted in Amazon S3, indicates the encryption option used (for example, SSE_KMS or CSE_KMS) and key information. This is a client-side setting. If workgroup settings override client-side settings, then the query uses the encryption configuration that is specified for the workgroup, and also uses the location for storing query results specified in the workgroup. See WorkGroupConfiguration$EnforceWorkGroupConfiguration and Workgroup Settings Override Client-Side Settings.
      */
     EncryptionConfiguration?: EncryptionConfiguration;
     /**
      * The Amazon Web Services account ID that you expect to be the owner of the Amazon S3 bucket specified by ResultConfiguration$OutputLocation. If set, Athena uses the value for ExpectedBucketOwner when it makes Amazon S3 calls to your specified output location. If the ExpectedBucketOwner Amazon Web Services account ID does not match the actual owner of the Amazon S3 bucket, the call fails with a permissions error. This is a client-side setting. If workgroup settings override client-side settings, then the query uses the ExpectedBucketOwner setting that is specified for the workgroup, and also uses the location for storing query results specified in the workgroup. See WorkGroupConfiguration$EnforceWorkGroupConfiguration and Workgroup Settings Override Client-Side Settings.
      */
     ExpectedBucketOwner?: String;
+    /**
+     * Indicates that an Amazon S3 canned ACL should be set to control ownership of stored query results. Currently the only supported canned ACL is BUCKET_OWNER_FULL_CONTROL. This is a client-side setting. If workgroup settings override client-side settings, then the query uses the ACL configuration that is specified for the workgroup, and also uses the location for storing query results specified in the workgroup. For more information, see WorkGroupConfiguration$EnforceWorkGroupConfiguration and Workgroup Settings Override Client-Side Settings.
+     */
+    AclConfiguration?: AclConfiguration;
   }
   export interface ResultConfigurationUpdates {
     /**
@@ -1148,7 +1180,7 @@ declare namespace Athena {
      */
     OutputLocation?: String;
     /**
-     * If set to "true", indicates that the previously-specified query results location (also known as a client-side setting) for queries in this workgroup should be ignored and set to null. If set to "false" or not set, and a value is present in the OutputLocation in ResultConfigurationUpdates (the client-side setting), the OutputLocation in the workgroup's ResultConfiguration is updated with the new value. For more information, see Workgroup Settings Override Client-Side Settings.
+     * If set to "true", indicates that the previously-specified query results location (also known as a client-side setting) for queries in this workgroup should be ignored and set to null. If set to "false" or not set, and a value is present in the OutputLocation in ResultConfigurationUpdates (the client-side setting), the OutputLocation in the workgroup's ResultConfiguration will be updated with the new value. For more information, see Workgroup Settings Override Client-Side Settings.
      */
     RemoveOutputLocation?: BoxedBoolean;
     /**
@@ -1156,7 +1188,7 @@ declare namespace Athena {
      */
     EncryptionConfiguration?: EncryptionConfiguration;
     /**
-     * If set to "true", indicates that the previously-specified encryption configuration (also known as the client-side setting) for queries in this workgroup should be ignored and set to null. If set to "false" or not set, and a value is present in the EncryptionConfiguration in ResultConfigurationUpdates (the client-side setting), the EncryptionConfiguration in the workgroup's ResultConfiguration is updated with the new value. For more information, see Workgroup Settings Override Client-Side Settings.
+     * If set to "true", indicates that the previously-specified encryption configuration (also known as the client-side setting) for queries in this workgroup should be ignored and set to null. If set to "false" or not set, and a value is present in the EncryptionConfiguration in ResultConfigurationUpdates (the client-side setting), the EncryptionConfiguration in the workgroup's ResultConfiguration will be updated with the new value. For more information, see Workgroup Settings Override Client-Side Settings.
      */
     RemoveEncryptionConfiguration?: BoxedBoolean;
     /**
@@ -1167,6 +1199,14 @@ declare namespace Athena {
      * If set to "true", removes the Amazon Web Services account ID previously specified for ResultConfiguration$ExpectedBucketOwner. If set to "false" or not set, and a value is present in the ExpectedBucketOwner in ResultConfigurationUpdates (the client-side setting), the ExpectedBucketOwner in the workgroup's ResultConfiguration is updated with the new value. For more information, see Workgroup Settings Override Client-Side Settings.
      */
     RemoveExpectedBucketOwner?: BoxedBoolean;
+    /**
+     * The ACL configuration for the query results.
+     */
+    AclConfiguration?: AclConfiguration;
+    /**
+     * If set to true, indicates that the previously-specified ACL configuration for queries in this workgroup should be ignored and set to null. If set to false or not set, and a value is present in the AclConfiguration of ResultConfigurationUpdates, the AclConfiguration in the workgroup's ResultConfiguration is updated with the new value. For more information, see Workgroup Settings Override Client-Side Settings.
+     */
+    RemoveAclConfiguration?: BoxedBoolean;
   }
   export interface ResultSet {
     /**
@@ -1191,6 +1231,7 @@ declare namespace Athena {
     Data?: datumList;
   }
   export type RowList = Row[];
+  export type S3AclOption = "BUCKET_OWNER_FULL_CONTROL"|string;
   export interface StartQueryExecutionInput {
     /**
      * The SQL query statements to be executed.
@@ -1353,6 +1394,26 @@ declare namespace Athena {
   }
   export interface UpdateDataCatalogOutput {
   }
+  export interface UpdateNamedQueryInput {
+    /**
+     * The unique identifier (UUID) of the query.
+     */
+    NamedQueryId: NamedQueryId;
+    /**
+     * The name of the query.
+     */
+    Name: NameString;
+    /**
+     * The query description.
+     */
+    Description?: NamedQueryDescriptionString;
+    /**
+     * The contents of the query with all query statements.
+     */
+    QueryString: QueryString;
+  }
+  export interface UpdateNamedQueryOutput {
+  }
   export interface UpdatePreparedStatementInput {
     /**
      * The name of the prepared statement.