@pgarbe/cdk-ecr-sync 0.5.25 → 0.5.28

package/node_modules/aws-sdk/clients/ec2.d.ts

@@ -429,11 +429,11 @@ declare class EC2 extends Service {
    */
   createClientVpnRoute(callback?: (err: AWSError, data: EC2.Types.CreateClientVpnRouteResult) => void): Request<EC2.Types.CreateClientVpnRouteResult, AWSError>;
   /**
-   * Provides information to Amazon Web Services about your VPN customer gateway device. The customer gateway is the appliance at your end of the VPN connection. (The device on the Amazon Web Services side of the VPN connection is the virtual private gateway.) You must provide the internet-routable IP address of the customer gateway's external interface. The IP address must be static and can be behind a device performing network address translation (NAT). For devices that use Border Gateway Protocol (BGP), you can also provide the device's BGP Autonomous System Number (ASN). You can use an existing ASN assigned to your network. If you don't have an ASN already, you can use a private ASN (in the 64512 - 65534 range).  Amazon EC2 supports all 4-byte ASN numbers in the range of 1 - 2147483647, with the exception of the following:   7224 - reserved in the us-east-1 Region   9059 - reserved in the eu-west-1 Region   17943 - reserved in the ap-southeast-1 Region   10124 - reserved in the ap-northeast-1 Region    For more information, see Amazon Web Services Site-to-Site VPN in the Amazon Web Services Site-to-Site VPN User Guide.  To create more than one customer gateway with the same VPN type, IP address, and BGP ASN, specify a unique device name for each customer gateway. Identical requests return information about the existing customer gateway and do not create new customer gateways. 
+   * Provides information to Amazon Web Services about your VPN customer gateway device. The customer gateway is the appliance at your end of the VPN connection. (The device on the Amazon Web Services side of the VPN connection is the virtual private gateway.) You must provide the internet-routable IP address of the customer gateway's external interface. The IP address must be static and can be behind a device performing network address translation (NAT). For devices that use Border Gateway Protocol (BGP), you can also provide the device's BGP Autonomous System Number (ASN). You can use an existing ASN assigned to your network. If you don't have an ASN already, you can use a private ASN. For more information, see Customer gateway options for your Site-to-Site VPN connection in the Amazon Web Services Site-to-Site VPN User Guide. To create more than one customer gateway with the same VPN type, IP address, and BGP ASN, specify a unique device name for each customer gateway. An identical request returns information about the existing customer gateway; it doesn't create a new customer gateway.
    */
   createCustomerGateway(params: EC2.Types.CreateCustomerGatewayRequest, callback?: (err: AWSError, data: EC2.Types.CreateCustomerGatewayResult) => void): Request<EC2.Types.CreateCustomerGatewayResult, AWSError>;
   /**
-   * Provides information to Amazon Web Services about your VPN customer gateway device. The customer gateway is the appliance at your end of the VPN connection. (The device on the Amazon Web Services side of the VPN connection is the virtual private gateway.) You must provide the internet-routable IP address of the customer gateway's external interface. The IP address must be static and can be behind a device performing network address translation (NAT). For devices that use Border Gateway Protocol (BGP), you can also provide the device's BGP Autonomous System Number (ASN). You can use an existing ASN assigned to your network. If you don't have an ASN already, you can use a private ASN (in the 64512 - 65534 range).  Amazon EC2 supports all 4-byte ASN numbers in the range of 1 - 2147483647, with the exception of the following:   7224 - reserved in the us-east-1 Region   9059 - reserved in the eu-west-1 Region   17943 - reserved in the ap-southeast-1 Region   10124 - reserved in the ap-northeast-1 Region    For more information, see Amazon Web Services Site-to-Site VPN in the Amazon Web Services Site-to-Site VPN User Guide.  To create more than one customer gateway with the same VPN type, IP address, and BGP ASN, specify a unique device name for each customer gateway. Identical requests return information about the existing customer gateway and do not create new customer gateways. 
+   * Provides information to Amazon Web Services about your VPN customer gateway device. The customer gateway is the appliance at your end of the VPN connection. (The device on the Amazon Web Services side of the VPN connection is the virtual private gateway.) You must provide the internet-routable IP address of the customer gateway's external interface. The IP address must be static and can be behind a device performing network address translation (NAT). For devices that use Border Gateway Protocol (BGP), you can also provide the device's BGP Autonomous System Number (ASN). You can use an existing ASN assigned to your network. If you don't have an ASN already, you can use a private ASN. For more information, see Customer gateway options for your Site-to-Site VPN connection in the Amazon Web Services Site-to-Site VPN User Guide. To create more than one customer gateway with the same VPN type, IP address, and BGP ASN, specify a unique device name for each customer gateway. An identical request returns information about the existing customer gateway; it doesn't create a new customer gateway.
    */
   createCustomerGateway(callback?: (err: AWSError, data: EC2.Types.CreateCustomerGatewayResult) => void): Request<EC2.Types.CreateCustomerGatewayResult, AWSError>;
   /**
@@ -469,11 +469,11 @@ declare class EC2 extends Service {
    */
   createEgressOnlyInternetGateway(callback?: (err: AWSError, data: EC2.Types.CreateEgressOnlyInternetGatewayResult) => void): Request<EC2.Types.CreateEgressOnlyInternetGatewayResult, AWSError>;
   /**
-   * Launches an EC2 Fleet. You can create a single EC2 Fleet that includes multiple launch specifications that vary by instance type, AMI, Availability Zone, or subnet. For more information, see Launching an EC2 Fleet in the Amazon EC2 User Guide.
+   * Launches an EC2 Fleet. You can create a single EC2 Fleet that includes multiple launch specifications that vary by instance type, AMI, Availability Zone, or subnet. For more information, see EC2 Fleet in the Amazon EC2 User Guide.
    */
   createFleet(params: EC2.Types.CreateFleetRequest, callback?: (err: AWSError, data: EC2.Types.CreateFleetResult) => void): Request<EC2.Types.CreateFleetResult, AWSError>;
   /**
-   * Launches an EC2 Fleet. You can create a single EC2 Fleet that includes multiple launch specifications that vary by instance type, AMI, Availability Zone, or subnet. For more information, see Launching an EC2 Fleet in the Amazon EC2 User Guide.
+   * Launches an EC2 Fleet. You can create a single EC2 Fleet that includes multiple launch specifications that vary by instance type, AMI, Availability Zone, or subnet. For more information, see EC2 Fleet in the Amazon EC2 User Guide.
    */
   createFleet(callback?: (err: AWSError, data: EC2.Types.CreateFleetResult) => void): Request<EC2.Types.CreateFleetResult, AWSError>;
   /**
@@ -493,11 +493,11 @@ declare class EC2 extends Service {
    */
   createFpgaImage(callback?: (err: AWSError, data: EC2.Types.CreateFpgaImageResult) => void): Request<EC2.Types.CreateFpgaImageResult, AWSError>;
   /**
-   * Creates an Amazon EBS-backed AMI from an Amazon EBS-backed instance that is either running or stopped. If you customized your instance with instance store volumes or Amazon EBS volumes in addition to the root device volume, the new AMI contains block device mapping information for those volumes. When you launch an instance from this new AMI, the instance automatically launches with those additional volumes. For more information, see Creating Amazon EBS-Backed Linux AMIs in the Amazon Elastic Compute Cloud User Guide.
+   * Creates an Amazon EBS-backed AMI from an Amazon EBS-backed instance that is either running or stopped. By default, when Amazon EC2 creates the new AMI, it reboots the instance so that it can take snapshots of the attached volumes while data is at rest, in order to ensure a consistent state. You can set the NoReboot parameter to true in the API request, or use the --no-reboot option in the CLI to prevent Amazon EC2 from shutting down and rebooting the instance.  If you choose to bypass the shutdown and reboot process by setting the NoReboot parameter to true in the API request, or by using the --no-reboot option in the CLI, we can't guarantee the file system integrity of the created image.  If you customized your instance with instance store volumes or Amazon EBS volumes in addition to the root device volume, the new AMI contains block device mapping information for those volumes. When you launch an instance from this new AMI, the instance automatically launches with those additional volumes. For more information, see Creating Amazon EBS-Backed Linux AMIs in the Amazon Elastic Compute Cloud User Guide.
    */
   createImage(params: EC2.Types.CreateImageRequest, callback?: (err: AWSError, data: EC2.Types.CreateImageResult) => void): Request<EC2.Types.CreateImageResult, AWSError>;
   /**
-   * Creates an Amazon EBS-backed AMI from an Amazon EBS-backed instance that is either running or stopped. If you customized your instance with instance store volumes or Amazon EBS volumes in addition to the root device volume, the new AMI contains block device mapping information for those volumes. When you launch an instance from this new AMI, the instance automatically launches with those additional volumes. For more information, see Creating Amazon EBS-Backed Linux AMIs in the Amazon Elastic Compute Cloud User Guide.
+   * Creates an Amazon EBS-backed AMI from an Amazon EBS-backed instance that is either running or stopped. By default, when Amazon EC2 creates the new AMI, it reboots the instance so that it can take snapshots of the attached volumes while data is at rest, in order to ensure a consistent state. You can set the NoReboot parameter to true in the API request, or use the --no-reboot option in the CLI to prevent Amazon EC2 from shutting down and rebooting the instance.  If you choose to bypass the shutdown and reboot process by setting the NoReboot parameter to true in the API request, or by using the --no-reboot option in the CLI, we can't guarantee the file system integrity of the created image.  If you customized your instance with instance store volumes or Amazon EBS volumes in addition to the root device volume, the new AMI contains block device mapping information for those volumes. When you launch an instance from this new AMI, the instance automatically launches with those additional volumes. For more information, see Creating Amazon EBS-Backed Linux AMIs in the Amazon Elastic Compute Cloud User Guide.
    */
   createImage(callback?: (err: AWSError, data: EC2.Types.CreateImageResult) => void): Request<EC2.Types.CreateImageResult, AWSError>;
   /**
@@ -525,11 +525,11 @@ declare class EC2 extends Service {
    */
   createInternetGateway(callback?: (err: AWSError, data: EC2.Types.CreateInternetGatewayResult) => void): Request<EC2.Types.CreateInternetGatewayResult, AWSError>;
   /**
-   * Create an IPAM. Amazon VCP IP Address Manager (IPAM) is a VPC feature that you can use to automate your IP address management workflows including assigning, tracking, troubleshooting, and auditing IP addresses across Amazon Web Services Regions and accounts throughout your Amazon Web Services Organization. For more information, see Create an IPAM in the Amazon VPC IPAM User Guide. 
+   * Create an IPAM. Amazon VPC IP Address Manager (IPAM) is a VPC feature that you can use to automate your IP address management workflows including assigning, tracking, troubleshooting, and auditing IP addresses across Amazon Web Services Regions and accounts throughout your Amazon Web Services Organization. For more information, see Create an IPAM in the Amazon VPC IPAM User Guide. 
    */
   createIpam(params: EC2.Types.CreateIpamRequest, callback?: (err: AWSError, data: EC2.Types.CreateIpamResult) => void): Request<EC2.Types.CreateIpamResult, AWSError>;
   /**
-   * Create an IPAM. Amazon VCP IP Address Manager (IPAM) is a VPC feature that you can use to automate your IP address management workflows including assigning, tracking, troubleshooting, and auditing IP addresses across Amazon Web Services Regions and accounts throughout your Amazon Web Services Organization. For more information, see Create an IPAM in the Amazon VPC IPAM User Guide. 
+   * Create an IPAM. Amazon VPC IP Address Manager (IPAM) is a VPC feature that you can use to automate your IP address management workflows including assigning, tracking, troubleshooting, and auditing IP addresses across Amazon Web Services Regions and accounts throughout your Amazon Web Services Organization. For more information, see Create an IPAM in the Amazon VPC IPAM User Guide. 
    */
   createIpam(callback?: (err: AWSError, data: EC2.Types.CreateIpamResult) => void): Request<EC2.Types.CreateIpamResult, AWSError>;
   /**
@@ -549,19 +549,19 @@ declare class EC2 extends Service {
    */
   createIpamScope(callback?: (err: AWSError, data: EC2.Types.CreateIpamScopeResult) => void): Request<EC2.Types.CreateIpamScopeResult, AWSError>;
   /**
-   * Creates an ED25519 or 2048-bit RSA key pair with the specified name. Amazon EC2 stores the public key and displays the private key for you to save to a file. The private key is returned as an unencrypted PEM encoded PKCS#1 private key. If a key with the specified name already exists, Amazon EC2 returns an error. The key pair returned to you is available only in the Amazon Web Services Region in which you create it. If you prefer, you can create your own key pair using a third-party tool and upload it to any Region using ImportKeyPair. You can have up to 5,000 key pairs per Amazon Web Services Region. For more information, see Amazon EC2 key pairs in the Amazon Elastic Compute Cloud User Guide.
+   * Creates an ED25519 or 2048-bit RSA key pair with the specified name and in the specified PEM or PPK format. Amazon EC2 stores the public key and displays the private key for you to save to a file. The private key is returned as an unencrypted PEM encoded PKCS#1 private key or an unencrypted PPK formatted private key for use with PuTTY. If a key with the specified name already exists, Amazon EC2 returns an error. The key pair returned to you is available only in the Amazon Web Services Region in which you create it. If you prefer, you can create your own key pair using a third-party tool and upload it to any Region using ImportKeyPair. You can have up to 5,000 key pairs per Amazon Web Services Region. For more information, see Amazon EC2 key pairs in the Amazon Elastic Compute Cloud User Guide.
    */
   createKeyPair(params: EC2.Types.CreateKeyPairRequest, callback?: (err: AWSError, data: EC2.Types.KeyPair) => void): Request<EC2.Types.KeyPair, AWSError>;
   /**
-   * Creates an ED25519 or 2048-bit RSA key pair with the specified name. Amazon EC2 stores the public key and displays the private key for you to save to a file. The private key is returned as an unencrypted PEM encoded PKCS#1 private key. If a key with the specified name already exists, Amazon EC2 returns an error. The key pair returned to you is available only in the Amazon Web Services Region in which you create it. If you prefer, you can create your own key pair using a third-party tool and upload it to any Region using ImportKeyPair. You can have up to 5,000 key pairs per Amazon Web Services Region. For more information, see Amazon EC2 key pairs in the Amazon Elastic Compute Cloud User Guide.
+   * Creates an ED25519 or 2048-bit RSA key pair with the specified name and in the specified PEM or PPK format. Amazon EC2 stores the public key and displays the private key for you to save to a file. The private key is returned as an unencrypted PEM encoded PKCS#1 private key or an unencrypted PPK formatted private key for use with PuTTY. If a key with the specified name already exists, Amazon EC2 returns an error. The key pair returned to you is available only in the Amazon Web Services Region in which you create it. If you prefer, you can create your own key pair using a third-party tool and upload it to any Region using ImportKeyPair. You can have up to 5,000 key pairs per Amazon Web Services Region. For more information, see Amazon EC2 key pairs in the Amazon Elastic Compute Cloud User Guide.
    */
   createKeyPair(callback?: (err: AWSError, data: EC2.Types.KeyPair) => void): Request<EC2.Types.KeyPair, AWSError>;
   /**
-   * Creates a launch template. A launch template contains the parameters to launch an instance. When you launch an instance using RunInstances, you can specify a launch template instead of providing the launch parameters in the request. For more information, see Launching an instance from a launch template in the Amazon Elastic Compute Cloud User Guide.
+   * Creates a launch template. A launch template contains the parameters to launch an instance. When you launch an instance using RunInstances, you can specify a launch template instead of providing the launch parameters in the request. For more information, see Launching an instance from a launch template in the Amazon Elastic Compute Cloud User Guide. If you want to clone an existing launch template as the basis for creating a new launch template, you can use the Amazon EC2 console. The API, SDKs, and CLI do not support cloning a template. For more information, see Create a launch template from an existing launch template in the Amazon Elastic Compute Cloud User Guide.
    */
   createLaunchTemplate(params: EC2.Types.CreateLaunchTemplateRequest, callback?: (err: AWSError, data: EC2.Types.CreateLaunchTemplateResult) => void): Request<EC2.Types.CreateLaunchTemplateResult, AWSError>;
   /**
-   * Creates a launch template. A launch template contains the parameters to launch an instance. When you launch an instance using RunInstances, you can specify a launch template instead of providing the launch parameters in the request. For more information, see Launching an instance from a launch template in the Amazon Elastic Compute Cloud User Guide.
+   * Creates a launch template. A launch template contains the parameters to launch an instance. When you launch an instance using RunInstances, you can specify a launch template instead of providing the launch parameters in the request. For more information, see Launching an instance from a launch template in the Amazon Elastic Compute Cloud User Guide. If you want to clone an existing launch template as the basis for creating a new launch template, you can use the Amazon EC2 console. The API, SDKs, and CLI do not support cloning a template. For more information, see Create a launch template from an existing launch template in the Amazon Elastic Compute Cloud User Guide.
    */
   createLaunchTemplate(callback?: (err: AWSError, data: EC2.Types.CreateLaunchTemplateResult) => void): Request<EC2.Types.CreateLaunchTemplateResult, AWSError>;
   /**
@@ -797,11 +797,11 @@ declare class EC2 extends Service {
    */
   createTrafficMirrorSession(callback?: (err: AWSError, data: EC2.Types.CreateTrafficMirrorSessionResult) => void): Request<EC2.Types.CreateTrafficMirrorSessionResult, AWSError>;
   /**
-   * Creates a target for your Traffic Mirror session. A Traffic Mirror target is the destination for mirrored traffic. The Traffic Mirror source and the Traffic Mirror target (monitoring appliances) can be in the same VPC, or in different VPCs connected via VPC peering or a transit gateway. A Traffic Mirror target can be a network interface, or a Network Load Balancer. To use the target in a Traffic Mirror session, use CreateTrafficMirrorSession.
+   * Creates a target for your Traffic Mirror session. A Traffic Mirror target is the destination for mirrored traffic. The Traffic Mirror source and the Traffic Mirror target (monitoring appliances) can be in the same VPC, or in different VPCs connected via VPC peering or a transit gateway. A Traffic Mirror target can be a network interface, a Network Load Balancer, or a Gateway Load Balancer endpoint. To use the target in a Traffic Mirror session, use CreateTrafficMirrorSession.
    */
   createTrafficMirrorTarget(params: EC2.Types.CreateTrafficMirrorTargetRequest, callback?: (err: AWSError, data: EC2.Types.CreateTrafficMirrorTargetResult) => void): Request<EC2.Types.CreateTrafficMirrorTargetResult, AWSError>;
   /**
-   * Creates a target for your Traffic Mirror session. A Traffic Mirror target is the destination for mirrored traffic. The Traffic Mirror source and the Traffic Mirror target (monitoring appliances) can be in the same VPC, or in different VPCs connected via VPC peering or a transit gateway. A Traffic Mirror target can be a network interface, or a Network Load Balancer. To use the target in a Traffic Mirror session, use CreateTrafficMirrorSession.
+   * Creates a target for your Traffic Mirror session. A Traffic Mirror target is the destination for mirrored traffic. The Traffic Mirror source and the Traffic Mirror target (monitoring appliances) can be in the same VPC, or in different VPCs connected via VPC peering or a transit gateway. A Traffic Mirror target can be a network interface, a Network Load Balancer, or a Gateway Load Balancer endpoint. To use the target in a Traffic Mirror session, use CreateTrafficMirrorSession.
    */
   createTrafficMirrorTarget(callback?: (err: AWSError, data: EC2.Types.CreateTrafficMirrorTargetResult) => void): Request<EC2.Types.CreateTrafficMirrorTargetResult, AWSError>;
   /**
@@ -893,11 +893,11 @@ declare class EC2 extends Service {
    */
   createVpc(callback?: (err: AWSError, data: EC2.Types.CreateVpcResult) => void): Request<EC2.Types.CreateVpcResult, AWSError>;
   /**
-   * Creates a VPC endpoint for a specified service. An endpoint enables you to create a private connection between your VPC and the service. The service may be provided by Amazon Web Services, an Amazon Web Services Marketplace Partner, or another Amazon Web Services account. For more information, see VPC Endpoints in the Amazon Virtual Private Cloud User Guide. A gateway endpoint serves as a target for a route in your route table for traffic destined for the Amazon Web Service. You can specify an endpoint policy to attach to the endpoint, which will control access to the service from your VPC. You can also specify the VPC route tables that use the endpoint. An interface endpoint is a network interface in your subnet that serves as an endpoint for communicating with the specified service. You can specify the subnets in which to create an endpoint, and the security groups to associate with the endpoint network interface. A GatewayLoadBalancer endpoint is a network interface in your subnet that serves an endpoint for communicating with a Gateway Load Balancer that you've configured as a VPC endpoint service. Use DescribeVpcEndpointServices to get a list of supported services.
+   * Creates a VPC endpoint for a specified service. An endpoint enables you to create a private connection between your VPC and the service. The service may be provided by Amazon Web Services, an Amazon Web Services Marketplace Partner, or another Amazon Web Services account. For more information, see the Amazon Web Services PrivateLink Guide.
    */
   createVpcEndpoint(params: EC2.Types.CreateVpcEndpointRequest, callback?: (err: AWSError, data: EC2.Types.CreateVpcEndpointResult) => void): Request<EC2.Types.CreateVpcEndpointResult, AWSError>;
   /**
-   * Creates a VPC endpoint for a specified service. An endpoint enables you to create a private connection between your VPC and the service. The service may be provided by Amazon Web Services, an Amazon Web Services Marketplace Partner, or another Amazon Web Services account. For more information, see VPC Endpoints in the Amazon Virtual Private Cloud User Guide. A gateway endpoint serves as a target for a route in your route table for traffic destined for the Amazon Web Service. You can specify an endpoint policy to attach to the endpoint, which will control access to the service from your VPC. You can also specify the VPC route tables that use the endpoint. An interface endpoint is a network interface in your subnet that serves as an endpoint for communicating with the specified service. You can specify the subnets in which to create an endpoint, and the security groups to associate with the endpoint network interface. A GatewayLoadBalancer endpoint is a network interface in your subnet that serves an endpoint for communicating with a Gateway Load Balancer that you've configured as a VPC endpoint service. Use DescribeVpcEndpointServices to get a list of supported services.
+   * Creates a VPC endpoint for a specified service. An endpoint enables you to create a private connection between your VPC and the service. The service may be provided by Amazon Web Services, an Amazon Web Services Marketplace Partner, or another Amazon Web Services account. For more information, see the Amazon Web Services PrivateLink Guide.
    */
   createVpcEndpoint(callback?: (err: AWSError, data: EC2.Types.CreateVpcEndpointResult) => void): Request<EC2.Types.CreateVpcEndpointResult, AWSError>;
   /**
@@ -909,11 +909,11 @@ declare class EC2 extends Service {
    */
   createVpcEndpointConnectionNotification(callback?: (err: AWSError, data: EC2.Types.CreateVpcEndpointConnectionNotificationResult) => void): Request<EC2.Types.CreateVpcEndpointConnectionNotificationResult, AWSError>;
   /**
-   * Creates a VPC endpoint service configuration to which service consumers (Amazon Web Services accounts, IAM users, and IAM roles) can connect. To create an endpoint service configuration, you must first create one of the following for your service:   A Network Load Balancer. Service consumers connect to your service using an interface endpoint.   A Gateway Load Balancer. Service consumers connect to your service using a Gateway Load Balancer endpoint.   For more information, see VPC Endpoint Services in the Amazon Virtual Private Cloud User Guide.  If you set the private DNS name, you must prove that you own the private DNS domain name. For more information, see VPC Endpoint Service Private DNS Name Verification in the Amazon Virtual Private Cloud User Guide.
+   * Creates a VPC endpoint service to which service consumers (Amazon Web Services accounts, IAM users, and IAM roles) can connect. Before you create an endpoint service, you must create one of the following for your service:   A Network Load Balancer. Service consumers connect to your service using an interface endpoint.   A Gateway Load Balancer. Service consumers connect to your service using a Gateway Load Balancer endpoint.   If you set the private DNS name, you must prove that you own the private DNS domain name. For more information, see the Amazon Web Services PrivateLink Guide.
    */
   createVpcEndpointServiceConfiguration(params: EC2.Types.CreateVpcEndpointServiceConfigurationRequest, callback?: (err: AWSError, data: EC2.Types.CreateVpcEndpointServiceConfigurationResult) => void): Request<EC2.Types.CreateVpcEndpointServiceConfigurationResult, AWSError>;
   /**
-   * Creates a VPC endpoint service configuration to which service consumers (Amazon Web Services accounts, IAM users, and IAM roles) can connect. To create an endpoint service configuration, you must first create one of the following for your service:   A Network Load Balancer. Service consumers connect to your service using an interface endpoint.   A Gateway Load Balancer. Service consumers connect to your service using a Gateway Load Balancer endpoint.   For more information, see VPC Endpoint Services in the Amazon Virtual Private Cloud User Guide.  If you set the private DNS name, you must prove that you own the private DNS domain name. For more information, see VPC Endpoint Service Private DNS Name Verification in the Amazon Virtual Private Cloud User Guide.
+   * Creates a VPC endpoint service to which service consumers (Amazon Web Services accounts, IAM users, and IAM roles) can connect. Before you create an endpoint service, you must create one of the following for your service:   A Network Load Balancer. Service consumers connect to your service using an interface endpoint.   A Gateway Load Balancer. Service consumers connect to your service using a Gateway Load Balancer endpoint.   If you set the private DNS name, you must prove that you own the private DNS domain name. For more information, see the Amazon Web Services PrivateLink Guide.
    */
   createVpcEndpointServiceConfiguration(callback?: (err: AWSError, data: EC2.Types.CreateVpcEndpointServiceConfigurationResult) => void): Request<EC2.Types.CreateVpcEndpointServiceConfigurationResult, AWSError>;
   /**
@@ -997,11 +997,11 @@ declare class EC2 extends Service {
    */
   deleteEgressOnlyInternetGateway(callback?: (err: AWSError, data: EC2.Types.DeleteEgressOnlyInternetGatewayResult) => void): Request<EC2.Types.DeleteEgressOnlyInternetGatewayResult, AWSError>;
   /**
-   * Deletes the specified EC2 Fleet. After you delete an EC2 Fleet, it launches no new instances. You must specify whether a deleted EC2 Fleet should also terminate its instances. If you choose to terminate the instances, the EC2 Fleet enters the deleted_terminating state. Otherwise, the EC2 Fleet enters the deleted_running state, and the instances continue to run until they are interrupted or you terminate them manually. For instant fleets, EC2 Fleet must terminate the instances when the fleet is deleted. A deleted instant fleet with running instances is not supported.  Restrictions    You can delete up to 25 instant fleets in a single request. If you exceed this number, no instant fleets are deleted and an error is returned. There is no restriction on the number of fleets of type maintain or request that can be deleted in a single request.   Up to 1000 instances can be terminated in a single request to delete instant fleets.   For more information, see Deleting an EC2 Fleet in the Amazon EC2 User Guide.
+   * Deletes the specified EC2 Fleet. After you delete an EC2 Fleet, it launches no new instances. You must specify whether a deleted EC2 Fleet should also terminate its instances. If you choose to terminate the instances, the EC2 Fleet enters the deleted_terminating state. Otherwise, the EC2 Fleet enters the deleted_running state, and the instances continue to run until they are interrupted or you terminate them manually. For instant fleets, EC2 Fleet must terminate the instances when the fleet is deleted. A deleted instant fleet with running instances is not supported.  Restrictions    You can delete up to 25 instant fleets in a single request. If you exceed this number, no instant fleets are deleted and an error is returned. There is no restriction on the number of fleets of type maintain or request that can be deleted in a single request.   Up to 1000 instances can be terminated in a single request to delete instant fleets.   For more information, see Delete an EC2 Fleet in the Amazon EC2 User Guide.
    */
   deleteFleets(params: EC2.Types.DeleteFleetsRequest, callback?: (err: AWSError, data: EC2.Types.DeleteFleetsResult) => void): Request<EC2.Types.DeleteFleetsResult, AWSError>;
   /**
-   * Deletes the specified EC2 Fleet. After you delete an EC2 Fleet, it launches no new instances. You must specify whether a deleted EC2 Fleet should also terminate its instances. If you choose to terminate the instances, the EC2 Fleet enters the deleted_terminating state. Otherwise, the EC2 Fleet enters the deleted_running state, and the instances continue to run until they are interrupted or you terminate them manually. For instant fleets, EC2 Fleet must terminate the instances when the fleet is deleted. A deleted instant fleet with running instances is not supported.  Restrictions    You can delete up to 25 instant fleets in a single request. If you exceed this number, no instant fleets are deleted and an error is returned. There is no restriction on the number of fleets of type maintain or request that can be deleted in a single request.   Up to 1000 instances can be terminated in a single request to delete instant fleets.   For more information, see Deleting an EC2 Fleet in the Amazon EC2 User Guide.
+   * Deletes the specified EC2 Fleet. After you delete an EC2 Fleet, it launches no new instances. You must specify whether a deleted EC2 Fleet should also terminate its instances. If you choose to terminate the instances, the EC2 Fleet enters the deleted_terminating state. Otherwise, the EC2 Fleet enters the deleted_running state, and the instances continue to run until they are interrupted or you terminate them manually. For instant fleets, EC2 Fleet must terminate the instances when the fleet is deleted. A deleted instant fleet with running instances is not supported.  Restrictions    You can delete up to 25 instant fleets in a single request. If you exceed this number, no instant fleets are deleted and an error is returned. There is no restriction on the number of fleets of type maintain or request that can be deleted in a single request.   Up to 1000 instances can be terminated in a single request to delete instant fleets.   For more information, see Delete an EC2 Fleet in the Amazon EC2 User Guide.
    */
   deleteFleets(callback?: (err: AWSError, data: EC2.Types.DeleteFleetsResult) => void): Request<EC2.Types.DeleteFleetsResult, AWSError>;
   /**
@@ -1037,11 +1037,11 @@ declare class EC2 extends Service {
    */
   deleteInternetGateway(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Delete an IPAM. Deleting an IPAM removes all monitored data associated with the IPAM including the historical data for CIDRs.  You cannot delete an IPAM if there are CIDRs provisioned to pools or if there are allocations in the pools within the IPAM. To deprovision pool CIDRs, see DeprovisionIpamPoolCidr. To release allocations, see ReleaseIpamPoolAllocation.   For more information, see Delete an IPAM in the Amazon VPC IPAM User Guide. 
+   * Delete an IPAM. Deleting an IPAM removes all monitored data associated with the IPAM including the historical data for CIDRs. For more information, see Delete an IPAM in the Amazon VPC IPAM User Guide. 
    */
   deleteIpam(params: EC2.Types.DeleteIpamRequest, callback?: (err: AWSError, data: EC2.Types.DeleteIpamResult) => void): Request<EC2.Types.DeleteIpamResult, AWSError>;
   /**
-   * Delete an IPAM. Deleting an IPAM removes all monitored data associated with the IPAM including the historical data for CIDRs.  You cannot delete an IPAM if there are CIDRs provisioned to pools or if there are allocations in the pools within the IPAM. To deprovision pool CIDRs, see DeprovisionIpamPoolCidr. To release allocations, see ReleaseIpamPoolAllocation.   For more information, see Delete an IPAM in the Amazon VPC IPAM User Guide. 
+   * Delete an IPAM. Deleting an IPAM removes all monitored data associated with the IPAM including the historical data for CIDRs. For more information, see Delete an IPAM in the Amazon VPC IPAM User Guide. 
    */
   deleteIpam(callback?: (err: AWSError, data: EC2.Types.DeleteIpamResult) => void): Request<EC2.Types.DeleteIpamResult, AWSError>;
   /**
@@ -1469,19 +1469,19 @@ declare class EC2 extends Service {
    */
   deprovisionPublicIpv4PoolCidr(callback?: (err: AWSError, data: EC2.Types.DeprovisionPublicIpv4PoolCidrResult) => void): Request<EC2.Types.DeprovisionPublicIpv4PoolCidrResult, AWSError>;
   /**
-   * Deregisters the specified AMI. After you deregister an AMI, it can't be used to launch new instances; however, it doesn't affect any instances that you've already launched from the AMI. You'll continue to incur usage costs for those instances until you terminate them. When you deregister an Amazon EBS-backed AMI, it doesn't affect the snapshot that was created for the root volume of the instance during the AMI creation process. When you deregister an instance store-backed AMI, it doesn't affect the files that you uploaded to Amazon S3 when you created the AMI.
+   * Deregisters the specified AMI. After you deregister an AMI, it can't be used to launch new instances. If you deregister an AMI that matches a Recycle Bin retention rule, the AMI is retained in the Recycle Bin for the specified retention period. For more information, see Recycle Bin in the Amazon Elastic Compute Cloud User Guide. When you deregister an AMI, it doesn't affect any instances that you've already launched from the AMI. You'll continue to incur usage costs for those instances until you terminate them. When you deregister an Amazon EBS-backed AMI, it doesn't affect the snapshot that was created for the root volume of the instance during the AMI creation process. When you deregister an instance store-backed AMI, it doesn't affect the files that you uploaded to Amazon S3 when you created the AMI.
    */
   deregisterImage(params: EC2.Types.DeregisterImageRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Deregisters the specified AMI. After you deregister an AMI, it can't be used to launch new instances; however, it doesn't affect any instances that you've already launched from the AMI. You'll continue to incur usage costs for those instances until you terminate them. When you deregister an Amazon EBS-backed AMI, it doesn't affect the snapshot that was created for the root volume of the instance during the AMI creation process. When you deregister an instance store-backed AMI, it doesn't affect the files that you uploaded to Amazon S3 when you created the AMI.
+   * Deregisters the specified AMI. After you deregister an AMI, it can't be used to launch new instances. If you deregister an AMI that matches a Recycle Bin retention rule, the AMI is retained in the Recycle Bin for the specified retention period. For more information, see Recycle Bin in the Amazon Elastic Compute Cloud User Guide. When you deregister an AMI, it doesn't affect any instances that you've already launched from the AMI. You'll continue to incur usage costs for those instances until you terminate them. When you deregister an Amazon EBS-backed AMI, it doesn't affect the snapshot that was created for the root volume of the instance during the AMI creation process. When you deregister an instance store-backed AMI, it doesn't affect the files that you uploaded to Amazon S3 when you created the AMI.
    */
   deregisterImage(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * c Deregisters tag keys to prevent tags that have the specified tag keys from being included in scheduled event notifications for resources in the Region.
+   * Deregisters tag keys to prevent tags that have the specified tag keys from being included in scheduled event notifications for resources in the Region.
    */
   deregisterInstanceEventNotificationAttributes(params: EC2.Types.DeregisterInstanceEventNotificationAttributesRequest, callback?: (err: AWSError, data: EC2.Types.DeregisterInstanceEventNotificationAttributesResult) => void): Request<EC2.Types.DeregisterInstanceEventNotificationAttributesResult, AWSError>;
   /**
-   * c Deregisters tag keys to prevent tags that have the specified tag keys from being included in scheduled event notifications for resources in the Region.
+   * Deregisters tag keys to prevent tags that have the specified tag keys from being included in scheduled event notifications for resources in the Region.
    */
   deregisterInstanceEventNotificationAttributes(callback?: (err: AWSError, data: EC2.Types.DeregisterInstanceEventNotificationAttributesResult) => void): Request<EC2.Types.DeregisterInstanceEventNotificationAttributesResult, AWSError>;
   /**
@@ -1717,19 +1717,19 @@ declare class EC2 extends Service {
    */
   describeFleetHistory(callback?: (err: AWSError, data: EC2.Types.DescribeFleetHistoryResult) => void): Request<EC2.Types.DescribeFleetHistoryResult, AWSError>;
   /**
-   * Describes the running instances for the specified EC2 Fleet. For more information, see Monitoring your EC2 Fleet in the Amazon EC2 User Guide.
+   * Describes the running instances for the specified EC2 Fleet. For more information, see Monitor your EC2 Fleet in the Amazon EC2 User Guide.
    */
   describeFleetInstances(params: EC2.Types.DescribeFleetInstancesRequest, callback?: (err: AWSError, data: EC2.Types.DescribeFleetInstancesResult) => void): Request<EC2.Types.DescribeFleetInstancesResult, AWSError>;
   /**
-   * Describes the running instances for the specified EC2 Fleet. For more information, see Monitoring your EC2 Fleet in the Amazon EC2 User Guide.
+   * Describes the running instances for the specified EC2 Fleet. For more information, see Monitor your EC2 Fleet in the Amazon EC2 User Guide.
    */
   describeFleetInstances(callback?: (err: AWSError, data: EC2.Types.DescribeFleetInstancesResult) => void): Request<EC2.Types.DescribeFleetInstancesResult, AWSError>;
   /**
-   * Describes the specified EC2 Fleets or all of your EC2 Fleets. For more information, see Monitoring your EC2 Fleet in the Amazon EC2 User Guide.
+   * Describes the specified EC2 Fleets or all of your EC2 Fleets. For more information, see Monitor your EC2 Fleet in the Amazon EC2 User Guide.
    */
   describeFleets(params: EC2.Types.DescribeFleetsRequest, callback?: (err: AWSError, data: EC2.Types.DescribeFleetsResult) => void): Request<EC2.Types.DescribeFleetsResult, AWSError>;
   /**
-   * Describes the specified EC2 Fleets or all of your EC2 Fleets. For more information, see Monitoring your EC2 Fleet in the Amazon EC2 User Guide.
+   * Describes the specified EC2 Fleets or all of your EC2 Fleets. For more information, see Monitor your EC2 Fleet in the Amazon EC2 User Guide.
    */
   describeFleets(callback?: (err: AWSError, data: EC2.Types.DescribeFleetsResult) => void): Request<EC2.Types.DescribeFleetsResult, AWSError>;
   /**
@@ -2613,11 +2613,11 @@ declare class EC2 extends Service {
    */
   disableEbsEncryptionByDefault(callback?: (err: AWSError, data: EC2.Types.DisableEbsEncryptionByDefaultResult) => void): Request<EC2.Types.DisableEbsEncryptionByDefaultResult, AWSError>;
   /**
-   * Discontinue faster launching for a Windows AMI, and clean up existing pre-provisioned snapshots. When you disable faster launching, the AMI uses the standard launch process for each instance. All pre-provisioned snapshots must be removed before you can enable faster launching again.
+   * Discontinue faster launching for a Windows AMI, and clean up existing pre-provisioned snapshots. When you disable faster launching, the AMI uses the standard launch process for each instance. All pre-provisioned snapshots must be removed before you can enable faster launching again.  To change these settings, you must own the AMI. 
    */
   disableFastLaunch(params: EC2.Types.DisableFastLaunchRequest, callback?: (err: AWSError, data: EC2.Types.DisableFastLaunchResult) => void): Request<EC2.Types.DisableFastLaunchResult, AWSError>;
   /**
-   * Discontinue faster launching for a Windows AMI, and clean up existing pre-provisioned snapshots. When you disable faster launching, the AMI uses the standard launch process for each instance. All pre-provisioned snapshots must be removed before you can enable faster launching again.
+   * Discontinue faster launching for a Windows AMI, and clean up existing pre-provisioned snapshots. When you disable faster launching, the AMI uses the standard launch process for each instance. All pre-provisioned snapshots must be removed before you can enable faster launching again.  To change these settings, you must own the AMI. 
    */
   disableFastLaunch(callback?: (err: AWSError, data: EC2.Types.DisableFastLaunchResult) => void): Request<EC2.Types.DisableFastLaunchResult, AWSError>;
   /**
@@ -2781,11 +2781,11 @@ declare class EC2 extends Service {
    */
   enableEbsEncryptionByDefault(callback?: (err: AWSError, data: EC2.Types.EnableEbsEncryptionByDefaultResult) => void): Request<EC2.Types.EnableEbsEncryptionByDefaultResult, AWSError>;
   /**
-   * When you enable faster launching for a Windows AMI, images are pre-provisioned, using snapshots to launch instances up to 65% faster. To create the optimized Windows image, Amazon EC2 launches an instance and runs through Sysprep steps, rebooting as required. Then it creates a set of reserved snapshots that are used for subsequent launches. The reserved snapshots are automatically replenished as they are used, depending on your settings for launch frequency.
+   * When you enable faster launching for a Windows AMI, images are pre-provisioned, using snapshots to launch instances up to 65% faster. To create the optimized Windows image, Amazon EC2 launches an instance and runs through Sysprep steps, rebooting as required. Then it creates a set of reserved snapshots that are used for subsequent launches. The reserved snapshots are automatically replenished as they are used, depending on your settings for launch frequency.  To change these settings, you must own the AMI. 
    */
   enableFastLaunch(params: EC2.Types.EnableFastLaunchRequest, callback?: (err: AWSError, data: EC2.Types.EnableFastLaunchResult) => void): Request<EC2.Types.EnableFastLaunchResult, AWSError>;
   /**
-   * When you enable faster launching for a Windows AMI, images are pre-provisioned, using snapshots to launch instances up to 65% faster. To create the optimized Windows image, Amazon EC2 launches an instance and runs through Sysprep steps, rebooting as required. Then it creates a set of reserved snapshots that are used for subsequent launches. The reserved snapshots are automatically replenished as they are used, depending on your settings for launch frequency.
+   * When you enable faster launching for a Windows AMI, images are pre-provisioned, using snapshots to launch instances up to 65% faster. To create the optimized Windows image, Amazon EC2 launches an instance and runs through Sysprep steps, rebooting as required. Then it creates a set of reserved snapshots that are used for subsequent launches. The reserved snapshots are automatically replenished as they are used, depending on your settings for launch frequency.  To change these settings, you must own the AMI. 
    */
   enableFastLaunch(callback?: (err: AWSError, data: EC2.Types.EnableFastLaunchResult) => void): Request<EC2.Types.EnableFastLaunchResult, AWSError>;
   /**
@@ -2996,6 +2996,14 @@ declare class EC2 extends Service {
    * Returns a list of instance types with the specified instance attributes. You can use the response to preview the instance types without launching instances. Note that the response does not consider capacity. When you specify multiple parameters, you get instance types that satisfy all of the specified parameters. If you specify multiple values for a parameter, you get instance types that satisfy any of the specified values. For more information, see Preview instance types with specified attributes, Attribute-based instance type selection for EC2 Fleet, Attribute-based instance type selection for Spot Fleet, and Spot placement score in the Amazon EC2 User Guide, and Creating an Auto Scaling group using attribute-based instance type selection in the Amazon EC2 Auto Scaling User Guide.
    */
   getInstanceTypesFromInstanceRequirements(callback?: (err: AWSError, data: EC2.Types.GetInstanceTypesFromInstanceRequirementsResult) => void): Request<EC2.Types.GetInstanceTypesFromInstanceRequirementsResult, AWSError>;
+  /**
+   * A binary representation of the UEFI variable store. Only non-volatile variables are stored. This is a base64 encoded and zlib compressed binary value that must be properly encoded. When you use register-image to create an AMI, you can create an exact copy of your variable store by passing the UEFI data in the UefiData parameter. You can modify the UEFI data by using the python-uefivars tool on GitHub. You can use the tool to convert the UEFI data into a human-readable format (JSON), which you can inspect and modify, and then convert back into the binary format to use with register-image. For more information, see UEFI Secure Boot in the Amazon EC2 User Guide.
+   */
+  getInstanceUefiData(params: EC2.Types.GetInstanceUefiDataRequest, callback?: (err: AWSError, data: EC2.Types.GetInstanceUefiDataResult) => void): Request<EC2.Types.GetInstanceUefiDataResult, AWSError>;
+  /**
+   * A binary representation of the UEFI variable store. Only non-volatile variables are stored. This is a base64 encoded and zlib compressed binary value that must be properly encoded. When you use register-image to create an AMI, you can create an exact copy of your variable store by passing the UEFI data in the UefiData parameter. You can modify the UEFI data by using the python-uefivars tool on GitHub. You can use the tool to convert the UEFI data into a human-readable format (JSON), which you can inspect and modify, and then convert back into the binary format to use with register-image. For more information, see UEFI Secure Boot in the Amazon EC2 User Guide.
+   */
+  getInstanceUefiData(callback?: (err: AWSError, data: EC2.Types.GetInstanceUefiDataResult) => void): Request<EC2.Types.GetInstanceUefiDataResult, AWSError>;
   /**
    * Retrieve historical information about a CIDR within an IPAM scope. For more information, see View the history of IP addresses in the Amazon VPC IPAM User Guide.
    */
@@ -3212,6 +3220,14 @@ declare class EC2 extends Service {
    * Creates an import volume task using metadata from the specified disk image. This API action supports only single-volume VMs. To import multi-volume VMs, use ImportImage instead. To import a disk to a snapshot, use ImportSnapshot instead. This API action is not supported by the Command Line Interface (CLI). For information about using the Amazon EC2 CLI, which is deprecated, see Importing Disks to Amazon EBS in the Amazon EC2 CLI Reference PDF file. For information about the import manifest referenced by this API action, see VM Import Manifest.
    */
   importVolume(callback?: (err: AWSError, data: EC2.Types.ImportVolumeResult) => void): Request<EC2.Types.ImportVolumeResult, AWSError>;
+  /**
+   * Lists one or more AMIs that are currently in the Recycle Bin. For more information, see Recycle Bin in the Amazon Elastic Compute Cloud User Guide.
+   */
+  listImagesInRecycleBin(params: EC2.Types.ListImagesInRecycleBinRequest, callback?: (err: AWSError, data: EC2.Types.ListImagesInRecycleBinResult) => void): Request<EC2.Types.ListImagesInRecycleBinResult, AWSError>;
+  /**
+   * Lists one or more AMIs that are currently in the Recycle Bin. For more information, see Recycle Bin in the Amazon Elastic Compute Cloud User Guide.
+   */
+  listImagesInRecycleBin(callback?: (err: AWSError, data: EC2.Types.ListImagesInRecycleBinResult) => void): Request<EC2.Types.ListImagesInRecycleBinResult, AWSError>;
   /**
    * Lists one or more snapshots that are currently in the Recycle Bin.
    */
@@ -3364,6 +3380,14 @@ declare class EC2 extends Service {
    * Modifies the specified event window. You can define either a set of time ranges or a cron expression when modifying the event window, but not both. To modify the targets associated with the event window, use the AssociateInstanceEventWindow and DisassociateInstanceEventWindow API. If Amazon Web Services has already scheduled an event, modifying an event window won't change the time of the scheduled event. For more information, see Define event windows for scheduled events in the Amazon EC2 User Guide.
    */
   modifyInstanceEventWindow(callback?: (err: AWSError, data: EC2.Types.ModifyInstanceEventWindowResult) => void): Request<EC2.Types.ModifyInstanceEventWindowResult, AWSError>;
+  /**
+   * Modifies the recovery behavior of your instance to disable simplified automatic recovery or set the recovery behavior to default. The default configuration will not enable simplified automatic recovery for an unsupported instance type. For more information, see Simplified automatic recovery.
+   */
+  modifyInstanceMaintenanceOptions(params: EC2.Types.ModifyInstanceMaintenanceOptionsRequest, callback?: (err: AWSError, data: EC2.Types.ModifyInstanceMaintenanceOptionsResult) => void): Request<EC2.Types.ModifyInstanceMaintenanceOptionsResult, AWSError>;
+  /**
+   * Modifies the recovery behavior of your instance to disable simplified automatic recovery or set the recovery behavior to default. The default configuration will not enable simplified automatic recovery for an unsupported instance type. For more information, see Simplified automatic recovery.
+   */
+  modifyInstanceMaintenanceOptions(callback?: (err: AWSError, data: EC2.Types.ModifyInstanceMaintenanceOptionsResult) => void): Request<EC2.Types.ModifyInstanceMaintenanceOptionsResult, AWSError>;
   /**
    * Modify the instance metadata parameters on a running or stopped instance. When you modify the parameters on a stopped instance, they are applied when the instance is started. When you modify the parameters on a running instance, the API responds with a state of “pending”. After the parameter modifications are successfully applied to the instance, the state of the modifications changes from “pending” to “applied” in subsequent describe-instances API calls. For more information, see Instance metadata and user data in the Amazon EC2 User Guide.
    */
@@ -3541,11 +3565,11 @@ declare class EC2 extends Service {
    */
   modifyTransitGatewayVpcAttachment(callback?: (err: AWSError, data: EC2.Types.ModifyTransitGatewayVpcAttachmentResult) => void): Request<EC2.Types.ModifyTransitGatewayVpcAttachmentResult, AWSError>;
   /**
-   * You can modify several parameters of an existing EBS volume, including volume size, volume type, and IOPS capacity. If your EBS volume is attached to a current-generation EC2 instance type, you might be able to apply these changes without stopping the instance or detaching the volume from it. For more information about modifying EBS volumes, see Amazon EBS Elastic Volumes (Linux instances) or Amazon EBS Elastic Volumes (Windows instances). When you complete a resize operation on your volume, you need to extend the volume's file-system size to take advantage of the new storage capacity. For more information, see Extend a Linux file system or Extend a Windows file system.  You can use CloudWatch Events to check the status of a modification to an EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch Events User Guide. You can also track the status of a modification using DescribeVolumesModifications. For information about tracking status changes using either method, see Monitor the progress of volume modifications. With previous-generation instance types, resizing an EBS volume might require detaching and reattaching the volume or stopping and restarting the instance. If you reach the maximum volume modification rate per volume limit, you must wait at least six hours before applying further modifications to the affected EBS volume.
+   * You can modify several parameters of an existing EBS volume, including volume size, volume type, and IOPS capacity. If your EBS volume is attached to a current-generation EC2 instance type, you might be able to apply these changes without stopping the instance or detaching the volume from it. For more information about modifying EBS volumes, see Amazon EBS Elastic Volumes (Linux instances) or Amazon EBS Elastic Volumes (Windows instances). When you complete a resize operation on your volume, you need to extend the volume's file-system size to take advantage of the new storage capacity. For more information, see Extend a Linux file system or Extend a Windows file system.  You can use CloudWatch Events to check the status of a modification to an EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch Events User Guide. You can also track the status of a modification using DescribeVolumesModifications. For information about tracking status changes using either method, see Monitor the progress of volume modifications. With previous-generation instance types, resizing an EBS volume might require detaching and reattaching the volume or stopping and restarting the instance. After modifying a volume, you must wait at least six hours and ensure that the volume is in the in-use or available state before you can modify the same volume. This is sometimes referred to as a cooldown period.
    */
   modifyVolume(params: EC2.Types.ModifyVolumeRequest, callback?: (err: AWSError, data: EC2.Types.ModifyVolumeResult) => void): Request<EC2.Types.ModifyVolumeResult, AWSError>;
   /**
-   * You can modify several parameters of an existing EBS volume, including volume size, volume type, and IOPS capacity. If your EBS volume is attached to a current-generation EC2 instance type, you might be able to apply these changes without stopping the instance or detaching the volume from it. For more information about modifying EBS volumes, see Amazon EBS Elastic Volumes (Linux instances) or Amazon EBS Elastic Volumes (Windows instances). When you complete a resize operation on your volume, you need to extend the volume's file-system size to take advantage of the new storage capacity. For more information, see Extend a Linux file system or Extend a Windows file system.  You can use CloudWatch Events to check the status of a modification to an EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch Events User Guide. You can also track the status of a modification using DescribeVolumesModifications. For information about tracking status changes using either method, see Monitor the progress of volume modifications. With previous-generation instance types, resizing an EBS volume might require detaching and reattaching the volume or stopping and restarting the instance. If you reach the maximum volume modification rate per volume limit, you must wait at least six hours before applying further modifications to the affected EBS volume.
+   * You can modify several parameters of an existing EBS volume, including volume size, volume type, and IOPS capacity. If your EBS volume is attached to a current-generation EC2 instance type, you might be able to apply these changes without stopping the instance or detaching the volume from it. For more information about modifying EBS volumes, see Amazon EBS Elastic Volumes (Linux instances) or Amazon EBS Elastic Volumes (Windows instances). When you complete a resize operation on your volume, you need to extend the volume's file-system size to take advantage of the new storage capacity. For more information, see Extend a Linux file system or Extend a Windows file system.  You can use CloudWatch Events to check the status of a modification to an EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch Events User Guide. You can also track the status of a modification using DescribeVolumesModifications. For information about tracking status changes using either method, see Monitor the progress of volume modifications. With previous-generation instance types, resizing an EBS volume might require detaching and reattaching the volume or stopping and restarting the instance. After modifying a volume, you must wait at least six hours and ensure that the volume is in the in-use or available state before you can modify the same volume. This is sometimes referred to as a cooldown period.
    */
   modifyVolume(callback?: (err: AWSError, data: EC2.Types.ModifyVolumeResult) => void): Request<EC2.Types.ModifyVolumeResult, AWSError>;
   /**
@@ -3565,11 +3589,11 @@ declare class EC2 extends Service {
    */
   modifyVpcAttribute(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Modifies attributes of a specified VPC endpoint. The attributes that you can modify depend on the type of VPC endpoint (interface, gateway, or Gateway Load Balancer). For more information, see VPC Endpoints in the Amazon Virtual Private Cloud User Guide.
+   * Modifies attributes of a specified VPC endpoint. The attributes that you can modify depend on the type of VPC endpoint (interface, gateway, or Gateway Load Balancer). For more information, see the Amazon Web Services PrivateLink Guide.
    */
   modifyVpcEndpoint(params: EC2.Types.ModifyVpcEndpointRequest, callback?: (err: AWSError, data: EC2.Types.ModifyVpcEndpointResult) => void): Request<EC2.Types.ModifyVpcEndpointResult, AWSError>;
   /**
-   * Modifies attributes of a specified VPC endpoint. The attributes that you can modify depend on the type of VPC endpoint (interface, gateway, or Gateway Load Balancer). For more information, see VPC Endpoints in the Amazon Virtual Private Cloud User Guide.
+   * Modifies attributes of a specified VPC endpoint. The attributes that you can modify depend on the type of VPC endpoint (interface, gateway, or Gateway Load Balancer). For more information, see the Amazon Web Services PrivateLink Guide.
    */
   modifyVpcEndpoint(callback?: (err: AWSError, data: EC2.Types.ModifyVpcEndpointResult) => void): Request<EC2.Types.ModifyVpcEndpointResult, AWSError>;
   /**
@@ -3581,11 +3605,11 @@ declare class EC2 extends Service {
    */
   modifyVpcEndpointConnectionNotification(callback?: (err: AWSError, data: EC2.Types.ModifyVpcEndpointConnectionNotificationResult) => void): Request<EC2.Types.ModifyVpcEndpointConnectionNotificationResult, AWSError>;
   /**
-   * Modifies the attributes of your VPC endpoint service configuration. You can change the Network Load Balancers or Gateway Load Balancers for your service, and you can specify whether acceptance is required for requests to connect to your endpoint service through an interface VPC endpoint. If you set or modify the private DNS name, you must prove that you own the private DNS domain name. For more information, see VPC Endpoint Service Private DNS Name Verification in the Amazon Virtual Private Cloud User Guide.
+   * Modifies the attributes of your VPC endpoint service configuration. You can change the Network Load Balancers or Gateway Load Balancers for your service, and you can specify whether acceptance is required for requests to connect to your endpoint service through an interface VPC endpoint. If you set or modify the private DNS name, you must prove that you own the private DNS domain name.
    */
   modifyVpcEndpointServiceConfiguration(params: EC2.Types.ModifyVpcEndpointServiceConfigurationRequest, callback?: (err: AWSError, data: EC2.Types.ModifyVpcEndpointServiceConfigurationResult) => void): Request<EC2.Types.ModifyVpcEndpointServiceConfigurationResult, AWSError>;
   /**
-   * Modifies the attributes of your VPC endpoint service configuration. You can change the Network Load Balancers or Gateway Load Balancers for your service, and you can specify whether acceptance is required for requests to connect to your endpoint service through an interface VPC endpoint. If you set or modify the private DNS name, you must prove that you own the private DNS domain name. For more information, see VPC Endpoint Service Private DNS Name Verification in the Amazon Virtual Private Cloud User Guide.
+   * Modifies the attributes of your VPC endpoint service configuration. You can change the Network Load Balancers or Gateway Load Balancers for your service, and you can specify whether acceptance is required for requests to connect to your endpoint service through an interface VPC endpoint. If you set or modify the private DNS name, you must prove that you own the private DNS domain name.
    */
   modifyVpcEndpointServiceConfiguration(callback?: (err: AWSError, data: EC2.Types.ModifyVpcEndpointServiceConfigurationResult) => void): Request<EC2.Types.ModifyVpcEndpointServiceConfigurationResult, AWSError>;
   /**
@@ -3653,11 +3677,11 @@ declare class EC2 extends Service {
    */
   modifyVpnTunnelOptions(callback?: (err: AWSError, data: EC2.Types.ModifyVpnTunnelOptionsResult) => void): Request<EC2.Types.ModifyVpnTunnelOptionsResult, AWSError>;
   /**
-   * Enables detailed monitoring for a running instance. Otherwise, basic monitoring is enabled. For more information, see Monitor your instances using CloudWatch in the Amazon EC2 User Guide. To disable detailed monitoring, see .
+   * Enables detailed monitoring for a running instance. Otherwise, basic monitoring is enabled. For more information, see Monitor your instances using CloudWatch in the Amazon EC2 User Guide. To disable detailed monitoring, see UnmonitorInstances.
    */
   monitorInstances(params: EC2.Types.MonitorInstancesRequest, callback?: (err: AWSError, data: EC2.Types.MonitorInstancesResult) => void): Request<EC2.Types.MonitorInstancesResult, AWSError>;
   /**
-   * Enables detailed monitoring for a running instance. Otherwise, basic monitoring is enabled. For more information, see Monitor your instances using CloudWatch in the Amazon EC2 User Guide. To disable detailed monitoring, see .
+   * Enables detailed monitoring for a running instance. Otherwise, basic monitoring is enabled. For more information, see Monitor your instances using CloudWatch in the Amazon EC2 User Guide. To disable detailed monitoring, see UnmonitorInstances.
    */
   monitorInstances(callback?: (err: AWSError, data: EC2.Types.MonitorInstancesResult) => void): Request<EC2.Types.MonitorInstancesResult, AWSError>;
   /**
@@ -3669,11 +3693,11 @@ declare class EC2 extends Service {
    */
   moveAddressToVpc(callback?: (err: AWSError, data: EC2.Types.MoveAddressToVpcResult) => void): Request<EC2.Types.MoveAddressToVpcResult, AWSError>;
   /**
-   * Move an BYOIP IPv4 CIDR to IPAM from a public IPv4 pool.
+   * Move an BYOIP IPv4 CIDR to IPAM from a public IPv4 pool. If you already have an IPv4 BYOIP CIDR with Amazon Web Services, you can move the CIDR to IPAM from a public IPv4 pool. You cannot move an IPv6 CIDR to IPAM. If you are bringing a new IP address to Amazon Web Services for the first time, complete the steps in Tutorial: BYOIP address CIDRs to IPAM.
    */
   moveByoipCidrToIpam(params: EC2.Types.MoveByoipCidrToIpamRequest, callback?: (err: AWSError, data: EC2.Types.MoveByoipCidrToIpamResult) => void): Request<EC2.Types.MoveByoipCidrToIpamResult, AWSError>;
   /**
-   * Move an BYOIP IPv4 CIDR to IPAM from a public IPv4 pool.
+   * Move an BYOIP IPv4 CIDR to IPAM from a public IPv4 pool. If you already have an IPv4 BYOIP CIDR with Amazon Web Services, you can move the CIDR to IPAM from a public IPv4 pool. You cannot move an IPv6 CIDR to IPAM. If you are bringing a new IP address to Amazon Web Services for the first time, complete the steps in Tutorial: BYOIP address CIDRs to IPAM.
    */
   moveByoipCidrToIpam(callback?: (err: AWSError, data: EC2.Types.MoveByoipCidrToIpamResult) => void): Request<EC2.Types.MoveByoipCidrToIpamResult, AWSError>;
   /**
@@ -3685,19 +3709,19 @@ declare class EC2 extends Service {
    */
   provisionByoipCidr(callback?: (err: AWSError, data: EC2.Types.ProvisionByoipCidrResult) => void): Request<EC2.Types.ProvisionByoipCidrResult, AWSError>;
   /**
-   * Provision a CIDR to an IPAM pool. You can use thsi action to provision new CIDRs to a top-level pool or to transfer a CIDR from a top-level pool to a pool within it. For more information, see Provision CIDRs to pools in the Amazon VPC IPAM User Guide. 
+   * Provision a CIDR to an IPAM pool. You can use this action to provision new CIDRs to a top-level pool or to transfer a CIDR from a top-level pool to a pool within it. For more information, see Provision CIDRs to pools in the Amazon VPC IPAM User Guide. 
    */
   provisionIpamPoolCidr(params: EC2.Types.ProvisionIpamPoolCidrRequest, callback?: (err: AWSError, data: EC2.Types.ProvisionIpamPoolCidrResult) => void): Request<EC2.Types.ProvisionIpamPoolCidrResult, AWSError>;
   /**
-   * Provision a CIDR to an IPAM pool. You can use thsi action to provision new CIDRs to a top-level pool or to transfer a CIDR from a top-level pool to a pool within it. For more information, see Provision CIDRs to pools in the Amazon VPC IPAM User Guide. 
+   * Provision a CIDR to an IPAM pool. You can use this action to provision new CIDRs to a top-level pool or to transfer a CIDR from a top-level pool to a pool within it. For more information, see Provision CIDRs to pools in the Amazon VPC IPAM User Guide. 
    */
   provisionIpamPoolCidr(callback?: (err: AWSError, data: EC2.Types.ProvisionIpamPoolCidrResult) => void): Request<EC2.Types.ProvisionIpamPoolCidrResult, AWSError>;
   /**
-   * Provision a CIDR to a public IPv4 pool. For more information about IPAM, see What is IPAM? in the Amazon VPC IPAM User Guide. 
+   * Provision a CIDR to a public IPv4 pool. For more information about IPAM, see What is IPAM? in the Amazon VPC IPAM User Guide.
    */
   provisionPublicIpv4PoolCidr(params: EC2.Types.ProvisionPublicIpv4PoolCidrRequest, callback?: (err: AWSError, data: EC2.Types.ProvisionPublicIpv4PoolCidrResult) => void): Request<EC2.Types.ProvisionPublicIpv4PoolCidrResult, AWSError>;
   /**
-   * Provision a CIDR to a public IPv4 pool. For more information about IPAM, see What is IPAM? in the Amazon VPC IPAM User Guide. 
+   * Provision a CIDR to a public IPv4 pool. For more information about IPAM, see What is IPAM? in the Amazon VPC IPAM User Guide.
    */
   provisionPublicIpv4PoolCidr(callback?: (err: AWSError, data: EC2.Types.ProvisionPublicIpv4PoolCidrResult) => void): Request<EC2.Types.ProvisionPublicIpv4PoolCidrResult, AWSError>;
   /**
@@ -3741,11 +3765,11 @@ declare class EC2 extends Service {
    */
   registerImage(callback?: (err: AWSError, data: EC2.Types.RegisterImageResult) => void): Request<EC2.Types.RegisterImageResult, AWSError>;
   /**
-   * Registers a set of tag keys to include in scheduled event notifications for your resources.  To remove tags, use .
+   * Registers a set of tag keys to include in scheduled event notifications for your resources.  To remove tags, use DeregisterInstanceEventNotificationAttributes.
    */
   registerInstanceEventNotificationAttributes(params: EC2.Types.RegisterInstanceEventNotificationAttributesRequest, callback?: (err: AWSError, data: EC2.Types.RegisterInstanceEventNotificationAttributesResult) => void): Request<EC2.Types.RegisterInstanceEventNotificationAttributesResult, AWSError>;
   /**
-   * Registers a set of tag keys to include in scheduled event notifications for your resources.  To remove tags, use .
+   * Registers a set of tag keys to include in scheduled event notifications for your resources.  To remove tags, use DeregisterInstanceEventNotificationAttributes.
    */
   registerInstanceEventNotificationAttributes(callback?: (err: AWSError, data: EC2.Types.RegisterInstanceEventNotificationAttributesResult) => void): Request<EC2.Types.RegisterInstanceEventNotificationAttributesResult, AWSError>;
   /**
@@ -3885,19 +3909,19 @@ declare class EC2 extends Service {
    */
   reportInstanceStatus(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Creates a Spot Fleet request. The Spot Fleet request specifies the total target capacity and the On-Demand target capacity. Amazon EC2 calculates the difference between the total capacity and On-Demand capacity, and launches the difference as Spot capacity. You can submit a single request that includes multiple launch specifications that vary by instance type, AMI, Availability Zone, or subnet. By default, the Spot Fleet requests Spot Instances in the Spot Instance pool where the price per unit is the lowest. Each launch specification can include its own instance weighting that reflects the value of the instance type to your application workload. Alternatively, you can specify that the Spot Fleet distribute the target capacity across the Spot pools included in its launch specifications. By ensuring that the Spot Instances in your Spot Fleet are in different Spot pools, you can improve the availability of your fleet. You can specify tags for the Spot Fleet request and instances launched by the fleet. You cannot tag other resource types in a Spot Fleet request because only the spot-fleet-request and instance resource types are supported. For more information, see Spot Fleet requests in the Amazon EC2 User Guide for Linux Instances.
+   * Creates a Spot Fleet request. The Spot Fleet request specifies the total target capacity and the On-Demand target capacity. Amazon EC2 calculates the difference between the total capacity and On-Demand capacity, and launches the difference as Spot capacity. You can submit a single request that includes multiple launch specifications that vary by instance type, AMI, Availability Zone, or subnet. By default, the Spot Fleet requests Spot Instances in the Spot Instance pool where the price per unit is the lowest. Each launch specification can include its own instance weighting that reflects the value of the instance type to your application workload. Alternatively, you can specify that the Spot Fleet distribute the target capacity across the Spot pools included in its launch specifications. By ensuring that the Spot Instances in your Spot Fleet are in different Spot pools, you can improve the availability of your fleet. You can specify tags for the Spot Fleet request and instances launched by the fleet. You cannot tag other resource types in a Spot Fleet request because only the spot-fleet-request and instance resource types are supported. For more information, see Spot Fleet requests in the Amazon EC2 User Guide for Linux Instances.  We strongly discourage using the RequestSpotFleet API because it is a legacy API with no planned investment. For options for requesting Spot Instances, see Which is the best Spot request method to use? in the Amazon EC2 User Guide for Linux Instances. 
    */
   requestSpotFleet(params: EC2.Types.RequestSpotFleetRequest, callback?: (err: AWSError, data: EC2.Types.RequestSpotFleetResponse) => void): Request<EC2.Types.RequestSpotFleetResponse, AWSError>;
   /**
-   * Creates a Spot Fleet request. The Spot Fleet request specifies the total target capacity and the On-Demand target capacity. Amazon EC2 calculates the difference between the total capacity and On-Demand capacity, and launches the difference as Spot capacity. You can submit a single request that includes multiple launch specifications that vary by instance type, AMI, Availability Zone, or subnet. By default, the Spot Fleet requests Spot Instances in the Spot Instance pool where the price per unit is the lowest. Each launch specification can include its own instance weighting that reflects the value of the instance type to your application workload. Alternatively, you can specify that the Spot Fleet distribute the target capacity across the Spot pools included in its launch specifications. By ensuring that the Spot Instances in your Spot Fleet are in different Spot pools, you can improve the availability of your fleet. You can specify tags for the Spot Fleet request and instances launched by the fleet. You cannot tag other resource types in a Spot Fleet request because only the spot-fleet-request and instance resource types are supported. For more information, see Spot Fleet requests in the Amazon EC2 User Guide for Linux Instances.
+   * Creates a Spot Fleet request. The Spot Fleet request specifies the total target capacity and the On-Demand target capacity. Amazon EC2 calculates the difference between the total capacity and On-Demand capacity, and launches the difference as Spot capacity. You can submit a single request that includes multiple launch specifications that vary by instance type, AMI, Availability Zone, or subnet. By default, the Spot Fleet requests Spot Instances in the Spot Instance pool where the price per unit is the lowest. Each launch specification can include its own instance weighting that reflects the value of the instance type to your application workload. Alternatively, you can specify that the Spot Fleet distribute the target capacity across the Spot pools included in its launch specifications. By ensuring that the Spot Instances in your Spot Fleet are in different Spot pools, you can improve the availability of your fleet. You can specify tags for the Spot Fleet request and instances launched by the fleet. You cannot tag other resource types in a Spot Fleet request because only the spot-fleet-request and instance resource types are supported. For more information, see Spot Fleet requests in the Amazon EC2 User Guide for Linux Instances.  We strongly discourage using the RequestSpotFleet API because it is a legacy API with no planned investment. For options for requesting Spot Instances, see Which is the best Spot request method to use? in the Amazon EC2 User Guide for Linux Instances. 
    */
   requestSpotFleet(callback?: (err: AWSError, data: EC2.Types.RequestSpotFleetResponse) => void): Request<EC2.Types.RequestSpotFleetResponse, AWSError>;
   /**
-   * Creates a Spot Instance request. For more information, see Spot Instance requests in the Amazon EC2 User Guide for Linux Instances.
+   * Creates a Spot Instance request. For more information, see Spot Instance requests in the Amazon EC2 User Guide for Linux Instances.  We strongly discourage using the RequestSpotInstances API because it is a legacy API with no planned investment. For options for requesting Spot Instances, see Which is the best Spot request method to use? in the Amazon EC2 User Guide for Linux Instances. 
    */
   requestSpotInstances(params: EC2.Types.RequestSpotInstancesRequest, callback?: (err: AWSError, data: EC2.Types.RequestSpotInstancesResult) => void): Request<EC2.Types.RequestSpotInstancesResult, AWSError>;
   /**
-   * Creates a Spot Instance request. For more information, see Spot Instance requests in the Amazon EC2 User Guide for Linux Instances.
+   * Creates a Spot Instance request. For more information, see Spot Instance requests in the Amazon EC2 User Guide for Linux Instances.  We strongly discourage using the RequestSpotInstances API because it is a legacy API with no planned investment. For options for requesting Spot Instances, see Which is the best Spot request method to use? in the Amazon EC2 User Guide for Linux Instances. 
    */
   requestSpotInstances(callback?: (err: AWSError, data: EC2.Types.RequestSpotInstancesResult) => void): Request<EC2.Types.RequestSpotInstancesResult, AWSError>;
   /**
@@ -3964,6 +3988,14 @@ declare class EC2 extends Service {
    * Restores an Elastic IP address that was previously moved to the EC2-VPC platform back to the EC2-Classic platform. You cannot move an Elastic IP address that was originally allocated for use in EC2-VPC. The Elastic IP address must not be associated with an instance or network interface.
    */
   restoreAddressToClassic(callback?: (err: AWSError, data: EC2.Types.RestoreAddressToClassicResult) => void): Request<EC2.Types.RestoreAddressToClassicResult, AWSError>;
+  /**
+   * Restores an AMI from the Recycle Bin. For more information, see Recycle Bin in the Amazon Elastic Compute Cloud User Guide.
+   */
+  restoreImageFromRecycleBin(params: EC2.Types.RestoreImageFromRecycleBinRequest, callback?: (err: AWSError, data: EC2.Types.RestoreImageFromRecycleBinResult) => void): Request<EC2.Types.RestoreImageFromRecycleBinResult, AWSError>;
+  /**
+   * Restores an AMI from the Recycle Bin. For more information, see Recycle Bin in the Amazon Elastic Compute Cloud User Guide.
+   */
+  restoreImageFromRecycleBin(callback?: (err: AWSError, data: EC2.Types.RestoreImageFromRecycleBinResult) => void): Request<EC2.Types.RestoreImageFromRecycleBinResult, AWSError>;
   /**
    * Restores the entries from a previous version of a managed prefix list to a new version of the prefix list.
    */
@@ -4085,19 +4117,19 @@ declare class EC2 extends Service {
    */
   startNetworkInsightsAnalysis(callback?: (err: AWSError, data: EC2.Types.StartNetworkInsightsAnalysisResult) => void): Request<EC2.Types.StartNetworkInsightsAnalysisResult, AWSError>;
   /**
-   * Initiates the verification process to prove that the service provider owns the private DNS name domain for the endpoint service. The service provider must successfully perform the verification before the consumer can use the name to access the service. Before the service provider runs this command, they must add a record to the DNS server. For more information, see Adding a TXT Record to Your Domain's DNS Server  in the Amazon VPC User Guide.
+   * Initiates the verification process to prove that the service provider owns the private DNS name domain for the endpoint service. The service provider must successfully perform the verification before the consumer can use the name to access the service. Before the service provider runs this command, they must add a record to the DNS server.
    */
   startVpcEndpointServicePrivateDnsVerification(params: EC2.Types.StartVpcEndpointServicePrivateDnsVerificationRequest, callback?: (err: AWSError, data: EC2.Types.StartVpcEndpointServicePrivateDnsVerificationResult) => void): Request<EC2.Types.StartVpcEndpointServicePrivateDnsVerificationResult, AWSError>;
   /**
-   * Initiates the verification process to prove that the service provider owns the private DNS name domain for the endpoint service. The service provider must successfully perform the verification before the consumer can use the name to access the service. Before the service provider runs this command, they must add a record to the DNS server. For more information, see Adding a TXT Record to Your Domain's DNS Server  in the Amazon VPC User Guide.
+   * Initiates the verification process to prove that the service provider owns the private DNS name domain for the endpoint service. The service provider must successfully perform the verification before the consumer can use the name to access the service. Before the service provider runs this command, they must add a record to the DNS server.
    */
   startVpcEndpointServicePrivateDnsVerification(callback?: (err: AWSError, data: EC2.Types.StartVpcEndpointServicePrivateDnsVerificationResult) => void): Request<EC2.Types.StartVpcEndpointServicePrivateDnsVerificationResult, AWSError>;
   /**
-   * Stops an Amazon EBS-backed instance. You can use the Stop action to hibernate an instance if the instance is enabled for hibernation and it meets the hibernation prerequisites. For more information, see Hibernate your instance in the Amazon EC2 User Guide. We don't charge usage for a stopped instance, or data transfer fees; however, your root partition Amazon EBS volume remains and continues to persist your data, and you are charged for Amazon EBS volume usage. Every time you start your instance, Amazon EC2 charges a one-minute minimum for instance usage, and thereafter charges per second for instance usage. You can't stop or hibernate instance store-backed instances. You can't use the Stop action to hibernate Spot Instances, but you can specify that Amazon EC2 should hibernate Spot Instances when they are interrupted. For more information, see Hibernating interrupted Spot Instances in the Amazon EC2 User Guide. When you stop or hibernate an instance, we shut it down. You can restart your instance at any time. Before stopping or hibernating an instance, make sure it is in a state from which it can be restarted. Stopping an instance does not preserve data stored in RAM, but hibernating an instance does preserve data stored in RAM. If an instance cannot hibernate successfully, a normal shutdown occurs. Stopping and hibernating an instance is different to rebooting or terminating it. For example, when you stop or hibernate an instance, the root device and any other devices attached to the instance persist. When you terminate an instance, the root device and any other devices attached during the instance launch are automatically deleted. For more information about the differences between rebooting, stopping, hibernating, and terminating instances, see Instance lifecycle in the Amazon EC2 User Guide. When you stop an instance, we attempt to shut it down forcibly after a short while. If your instance appears stuck in the stopping state after a period of time, there may be an issue with the underlying host computer. For more information, see Troubleshoot stopping your instance in the Amazon EC2 User Guide.
+   * Stops an Amazon EBS-backed instance. For more information, see Stop and start your instance in the Amazon EC2 User Guide. You can use the Stop action to hibernate an instance if the instance is enabled for hibernation and it meets the hibernation prerequisites. For more information, see Hibernate your instance in the Amazon EC2 User Guide. We don't charge usage for a stopped instance, or data transfer fees; however, your root partition Amazon EBS volume remains and continues to persist your data, and you are charged for Amazon EBS volume usage. Every time you start your instance, Amazon EC2 charges a one-minute minimum for instance usage, and thereafter charges per second for instance usage. You can't stop or hibernate instance store-backed instances. You can't use the Stop action to hibernate Spot Instances, but you can specify that Amazon EC2 should hibernate Spot Instances when they are interrupted. For more information, see Hibernating interrupted Spot Instances in the Amazon EC2 User Guide. When you stop or hibernate an instance, we shut it down. You can restart your instance at any time. Before stopping or hibernating an instance, make sure it is in a state from which it can be restarted. Stopping an instance does not preserve data stored in RAM, but hibernating an instance does preserve data stored in RAM. If an instance cannot hibernate successfully, a normal shutdown occurs. Stopping and hibernating an instance is different to rebooting or terminating it. For example, when you stop or hibernate an instance, the root device and any other devices attached to the instance persist. When you terminate an instance, the root device and any other devices attached during the instance launch are automatically deleted. For more information about the differences between rebooting, stopping, hibernating, and terminating instances, see Instance lifecycle in the Amazon EC2 User Guide. When you stop an instance, we attempt to shut it down forcibly after a short while. If your instance appears stuck in the stopping state after a period of time, there may be an issue with the underlying host computer. For more information, see Troubleshoot stopping your instance in the Amazon EC2 User Guide.
    */
   stopInstances(params: EC2.Types.StopInstancesRequest, callback?: (err: AWSError, data: EC2.Types.StopInstancesResult) => void): Request<EC2.Types.StopInstancesResult, AWSError>;
   /**
-   * Stops an Amazon EBS-backed instance. You can use the Stop action to hibernate an instance if the instance is enabled for hibernation and it meets the hibernation prerequisites. For more information, see Hibernate your instance in the Amazon EC2 User Guide. We don't charge usage for a stopped instance, or data transfer fees; however, your root partition Amazon EBS volume remains and continues to persist your data, and you are charged for Amazon EBS volume usage. Every time you start your instance, Amazon EC2 charges a one-minute minimum for instance usage, and thereafter charges per second for instance usage. You can't stop or hibernate instance store-backed instances. You can't use the Stop action to hibernate Spot Instances, but you can specify that Amazon EC2 should hibernate Spot Instances when they are interrupted. For more information, see Hibernating interrupted Spot Instances in the Amazon EC2 User Guide. When you stop or hibernate an instance, we shut it down. You can restart your instance at any time. Before stopping or hibernating an instance, make sure it is in a state from which it can be restarted. Stopping an instance does not preserve data stored in RAM, but hibernating an instance does preserve data stored in RAM. If an instance cannot hibernate successfully, a normal shutdown occurs. Stopping and hibernating an instance is different to rebooting or terminating it. For example, when you stop or hibernate an instance, the root device and any other devices attached to the instance persist. When you terminate an instance, the root device and any other devices attached during the instance launch are automatically deleted. For more information about the differences between rebooting, stopping, hibernating, and terminating instances, see Instance lifecycle in the Amazon EC2 User Guide. When you stop an instance, we attempt to shut it down forcibly after a short while. If your instance appears stuck in the stopping state after a period of time, there may be an issue with the underlying host computer. For more information, see Troubleshoot stopping your instance in the Amazon EC2 User Guide.
+   * Stops an Amazon EBS-backed instance. For more information, see Stop and start your instance in the Amazon EC2 User Guide. You can use the Stop action to hibernate an instance if the instance is enabled for hibernation and it meets the hibernation prerequisites. For more information, see Hibernate your instance in the Amazon EC2 User Guide. We don't charge usage for a stopped instance, or data transfer fees; however, your root partition Amazon EBS volume remains and continues to persist your data, and you are charged for Amazon EBS volume usage. Every time you start your instance, Amazon EC2 charges a one-minute minimum for instance usage, and thereafter charges per second for instance usage. You can't stop or hibernate instance store-backed instances. You can't use the Stop action to hibernate Spot Instances, but you can specify that Amazon EC2 should hibernate Spot Instances when they are interrupted. For more information, see Hibernating interrupted Spot Instances in the Amazon EC2 User Guide. When you stop or hibernate an instance, we shut it down. You can restart your instance at any time. Before stopping or hibernating an instance, make sure it is in a state from which it can be restarted. Stopping an instance does not preserve data stored in RAM, but hibernating an instance does preserve data stored in RAM. If an instance cannot hibernate successfully, a normal shutdown occurs. Stopping and hibernating an instance is different to rebooting or terminating it. For example, when you stop or hibernate an instance, the root device and any other devices attached to the instance persist. When you terminate an instance, the root device and any other devices attached during the instance launch are automatically deleted. For more information about the differences between rebooting, stopping, hibernating, and terminating instances, see Instance lifecycle in the Amazon EC2 User Guide. When you stop an instance, we attempt to shut it down forcibly after a short while. If your instance appears stuck in the stopping state after a period of time, there may be an issue with the underlying host computer. For more information, see Troubleshoot stopping your instance in the Amazon EC2 User Guide.
    */
   stopInstances(callback?: (err: AWSError, data: EC2.Types.StopInstancesResult) => void): Request<EC2.Types.StopInstancesResult, AWSError>;
   /**
@@ -4300,6 +4332,14 @@ declare class EC2 extends Service {
    * Waits for the natGatewayAvailable state by periodically calling the underlying EC2.describeNatGatewaysoperation every 15 seconds (at most 40 times).
    */
   waitFor(state: "natGatewayAvailable", callback?: (err: AWSError, data: EC2.Types.DescribeNatGatewaysResult) => void): Request<EC2.Types.DescribeNatGatewaysResult, AWSError>;
+  /**
+   * Waits for the natGatewayDeleted state by periodically calling the underlying EC2.describeNatGatewaysoperation every 15 seconds (at most 40 times).
+   */
+  waitFor(state: "natGatewayDeleted", params: EC2.Types.DescribeNatGatewaysRequest & {$waiter?: WaiterConfiguration}, callback?: (err: AWSError, data: EC2.Types.DescribeNatGatewaysResult) => void): Request<EC2.Types.DescribeNatGatewaysResult, AWSError>;
+  /**
+   * Waits for the natGatewayDeleted state by periodically calling the underlying EC2.describeNatGatewaysoperation every 15 seconds (at most 40 times).
+   */
+  waitFor(state: "natGatewayDeleted", callback?: (err: AWSError, data: EC2.Types.DescribeNatGatewaysResult) => void): Request<EC2.Types.DescribeNatGatewaysResult, AWSError>;
   /**
    * Waits for the networkInterfaceAvailable state by periodically calling the underlying EC2.describeNetworkInterfacesoperation every 20 seconds (at most 10 times).
    */
@@ -4692,6 +4732,17 @@ declare namespace EC2 {
      */
     Description?: String;
   }
+  export interface AdditionalDetail {
+    /**
+     * The information type.
+     */
+    AdditionalDetailType?: String;
+    /**
+     * The path component.
+     */
+    Component?: AnalysisComponent;
+  }
+  export type AdditionalDetailList = AdditionalDetail[];
   export interface Address {
     /**
      * The ID of the instance that the address is associated with (if any).
@@ -4887,6 +4938,10 @@ declare namespace EC2 {
      * Indicates whether to enable or disable host recovery for the Dedicated Host. Host recovery is disabled by default. For more information, see  Host recovery in the Amazon EC2 User Guide. Default: off 
      */
     HostRecovery?: HostRecovery;
+    /**
+     * The Amazon Resource Name (ARN) of the Amazon Web Services Outpost on which to allocate the Dedicated Host.
+     */
+    OutpostArn?: String;
   }
   export interface AllocateHostsResult {
     /**
@@ -5083,7 +5138,7 @@ declare namespace EC2 {
      */
     NetworkInterfaceId?: String;
     /**
-     * Describes how the route was created. The following are possible values:    CreateRouteTable - The route was automatically created when the route table was created.    CreateRoute - The route was manually added to the route table.    EnableVgwRoutePropagation - The route was propagated by route propagation.  
+     * Describes how the route was created. The following are the possible values:   CreateRouteTable - The route was automatically created when the route table was created.   CreateRoute - The route was manually added to the route table.   EnableVgwRoutePropagation - The route was propagated by route propagation.  
      */
     Origin?: String;
     /**
@@ -5101,7 +5156,7 @@ declare namespace EC2 {
      */
     Cidr?: String;
     /**
-     * The direction. The following are possible values:   egress   ingress  
+     * The direction. The following are the possible values:   egress   ingress  
      */
     Direction?: String;
     /**
@@ -5921,7 +5976,7 @@ declare namespace EC2 {
   export type AutoRecoveryFlag = boolean;
   export interface AvailabilityZone {
     /**
-     * The state of the Availability Zone, Local Zone, or Wavelength Zone.
+     * The state of the Availability Zone, Local Zone, or Wavelength Zone. This value is always available.
      */
     State?: AvailabilityZoneState;
     /**
@@ -6729,11 +6784,23 @@ declare namespace EC2 {
     UploadStart?: DateTime;
   }
   export interface ClientLoginBannerOptions {
+    /**
+     * Enable or disable a customizable text banner that will be displayed on Amazon Web Services provided clients when a VPN session is established. Valid values: true | false  Default value: false 
+     */
     Enabled?: Boolean;
+    /**
+     * Customizable text that will be displayed in a banner on Amazon Web Services provided clients when a VPN session is established. UTF-8 encoded characters only. Maximum of 1400 characters.
+     */
     BannerText?: String;
   }
   export interface ClientLoginBannerResponseOptions {
+    /**
+     * Current state of text banner feature. Valid values: true | false 
+     */
     Enabled?: Boolean;
+    /**
+     * Customizable text that will be displayed in a banner on Amazon Web Services provided clients when a VPN session is established. UTF-8 encoded characters only. Maximum of 1400 characters.
+     */
     BannerText?: String;
   }
   export type ClientVpnAssociationId = string;
@@ -6942,7 +7009,13 @@ declare namespace EC2 {
      * The options for managing connection authorization for new client connections.
      */
     ClientConnectOptions?: ClientConnectResponseOptions;
+    /**
+     * The maximum VPN session duration time in hours. Valid values: 8 | 10 | 12 | 24  Default value: 24 
+     */
     SessionTimeoutHours?: Integer;
+    /**
+     * Options for enabling a customizable text banner that will be displayed on Amazon Web Services provided clients when a VPN session is established.
+     */
     ClientLoginBannerOptions?: ClientLoginBannerResponseOptions;
   }
   export interface ClientVpnEndpointAttributeStatus {
@@ -7035,7 +7108,7 @@ declare namespace EC2 {
     /**
      * The ID of the address pool.
      */
-    PoolId?: CoipPoolId;
+    PoolId?: Ipv4PoolCoipId;
     /**
      * The address ranges of the address pool.
      */
@@ -7054,7 +7127,7 @@ declare namespace EC2 {
     PoolArn?: ResourceArn;
   }
   export type CoipPoolId = string;
-  export type CoipPoolIdSet = CoipPoolId[];
+  export type CoipPoolIdSet = Ipv4PoolCoipId[];
   export type CoipPoolMaxResults = number;
   export type CoipPoolSet = CoipPool[];
   export interface ConfirmProductInstanceRequest {
@@ -7578,7 +7651,13 @@ declare namespace EC2 {
      * The options for managing connection authorization for new client connections.
      */
     ClientConnectOptions?: ClientConnectOptions;
+    /**
+     * The maximum VPN session duration time in hours. Valid values: 8 | 10 | 12 | 24  Default value: 24 
+     */
     SessionTimeoutHours?: Integer;
+    /**
+     * Options for enabling a customizable text banner that will be displayed on Amazon Web Services provided clients when a VPN session is established.
+     */
     ClientLoginBannerOptions?: ClientLoginBannerOptions;
   }
   export interface CreateClientVpnEndpointResult {
@@ -7753,11 +7832,11 @@ declare namespace EC2 {
      */
     Lifecycle?: InstanceLifecycle;
     /**
-     * The error code that indicates why the instance could not be launched. For more information about error codes, see Error Codes.
+     * The error code that indicates why the instance could not be launched. For more information about error codes, see Error codes.
      */
     ErrorCode?: String;
     /**
-     * The error message that describes why the instance could not be launched. For more information about error messages, see Error Codes.
+     * The error message that describes why the instance could not be launched. For more information about error messages, see Error codes.
      */
     ErrorMessage?: String;
   }
@@ -7791,7 +7870,7 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see Ensuring Idempotency.
+     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see Ensuring idempotency.
      */
     ClientToken?: String;
     /**
@@ -7987,7 +8066,7 @@ declare namespace EC2 {
      */
     Name: String;
     /**
-     * By default, Amazon EC2 attempts to shut down and reboot the instance before creating the image. If the No Reboot option is set, Amazon EC2 doesn't shut down the instance before creating the image. Without a reboot, the AMI will be crash consistent (all the volumes are snapshotted at the same time), but not application consistent (all the operating system buffers are not flushed to disk before the snapshots are created).
+     * By default, when Amazon EC2 creates the new AMI, it reboots the instance so that it can take snapshots of the attached volumes while data is at rest, in order to ensure a consistent state. You can set the NoReboot parameter to true in the API request, or use the --no-reboot option in the CLI to prevent Amazon EC2 from shutting down and rebooting the instance.  If you choose to bypass the shutdown and reboot process by setting the NoReboot parameter to true in the API request, or by using the --no-reboot option in the CLI, we can't guarantee the file system integrity of the created image.  Default: false (follow standard reboot process)
      */
     NoReboot?: Boolean;
     /**
@@ -8097,7 +8176,7 @@ declare namespace EC2 {
     /**
      * The IP protocol assigned to this IPAM pool. You must choose either IPv4 or IPv6 protocol for a pool.
      */
-    AddressFamily?: AddressFamily;
+    AddressFamily: AddressFamily;
     /**
      * If selected, IPAM will continuously look for resources within the CIDR range of this pool and automatically import them as allocations into your IPAM. The CIDRs that will be allocated for these resources must not already be allocated to other resources in order for the import to succeed. IPAM will import a CIDR regardless of its compliance with the pool's allocation rules, so a resource might be imported and subsequently marked as noncompliant. If IPAM discovers multiple CIDRs that overlap, IPAM will import the largest CIDR only. If IPAM discovers multiple CIDRs with matching CIDRs, IPAM will randomly import one of them only.  A locale must be set on the pool for this feature to work.
      */
@@ -8207,13 +8286,17 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * The type of key pair. Note that ED25519 keys are not supported for Windows instances, EC2 Instance Connect, and EC2 Serial Console. Default: rsa 
+     * The type of key pair. Note that ED25519 keys are not supported for Windows instances. Default: rsa 
      */
     KeyType?: KeyType;
     /**
      * The tags to apply to the new key pair.
      */
     TagSpecifications?: TagSpecificationList;
+    /**
+     * The format of the key pair. Default: pem 
+     */
+    KeyFormat?: KeyFormat;
   }
   export interface CreateLaunchTemplateRequest {
     /**
@@ -8627,7 +8710,7 @@ declare namespace EC2 {
      */
     Ipv6PrefixCount?: Integer;
     /**
-     * Indicates the type of network interface. To create an Elastic Fabric Adapter (EFA), specify efa. For more information, see  Elastic Fabric Adapter in the Amazon Elastic Compute Cloud User Guide. To create a trunk network interface, specify trunk.
+     * The type of network interface. The default is interface. The only supported values are efa and trunk.
      */
     InterfaceType?: NetworkInterfaceCreationType;
     /**
@@ -8997,10 +9080,6 @@ declare namespace EC2 {
     ObjectKey?: String;
   }
   export interface CreateSubnetCidrReservationRequest {
-    /**
-     * The tags to assign to the subnet CIDR reservation.
-     */
-    TagSpecifications?: TagSpecificationList;
     /**
      * The ID of the subnet.
      */
@@ -9021,6 +9100,10 @@ declare namespace EC2 {
      * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
      */
     DryRun?: Boolean;
+    /**
+     * The tags to assign to the subnet CIDR reservation.
+     */
+    TagSpecifications?: TagSpecificationList;
   }
   export interface CreateSubnetCidrReservationResult {
     /**
@@ -9251,6 +9334,10 @@ declare namespace EC2 {
      * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency.
      */
     ClientToken?: String;
+    /**
+     * The ID of the Gateway Load Balancer endpoint.
+     */
+    GatewayLoadBalancerEndpointId?: VpcEndpointId;
   }
   export interface CreateTrafficMirrorTargetResult {
     /**
@@ -9688,6 +9775,14 @@ declare namespace EC2 {
      * (Interface endpoint) The ID of one or more security groups to associate with the endpoint network interface.
      */
     SecurityGroupIds?: VpcEndpointSecurityGroupIdList;
+    /**
+     * The IP address type for the endpoint.
+     */
+    IpAddressType?: IpAddressType;
+    /**
+     * The DNS options for the endpoint.
+     */
+    DnsOptions?: DnsOptionsSpecification;
     /**
      * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency.
      */
@@ -9717,7 +9812,7 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * Indicates whether requests from service consumers to create an endpoint to your service must be accepted. To accept a request, use AcceptVpcEndpointConnections.
+     * Indicates whether requests from service consumers to create an endpoint to your service must be accepted manually.
      */
     AcceptanceRequired?: Boolean;
     /**
@@ -9732,6 +9827,10 @@ declare namespace EC2 {
      * The Amazon Resource Names (ARNs) of one or more Gateway Load Balancers.
      */
     GatewayLoadBalancerArns?: ValueStringList;
+    /**
+     * The supported IP address types. The possible values are ipv4 and ipv6.
+     */
+    SupportedIpAddressTypes?: ValueStringList;
     /**
      * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency.
      */
@@ -10216,6 +10315,10 @@ declare namespace EC2 {
      * The ID of the IPAM to delete.
      */
     IpamId: IpamId;
+    /**
+     * Enables you to quickly delete an IPAM, private scopes, pools in private scopes, and any allocations in the pools in private scopes. You cannot delete the IPAM with this option if there is a pool in your public scope. If you use this option, IPAM does the following:   Deallocates any CIDRs allocated to VPC resources (such as VPCs) in pools in private scopes.  No VPC resources are deleted as a result of enabling this option. The CIDR associated with the resource will no longer be allocated from an IPAM pool, but the CIDR itself will remain unchanged.    Deprovisions all IPv4 CIDRs provisioned to IPAM pools in private scopes.   Deletes all IPAM pools in private scopes.   Deletes all non-default private scopes in the IPAM.   Deletes the default public and private scopes and the IPAM.  
+     */
+    Cascade?: Boolean;
   }
   export interface DeleteIpamResult {
     /**
@@ -11250,7 +11353,7 @@ declare namespace EC2 {
   }
   export interface DescribeAvailabilityZonesRequest {
     /**
-     * The filters.    group-name - For Availability Zones, use the Region name. For Local Zones, use the name of the group associated with the Local Zone (for example, us-west-2-lax-1) For Wavelength Zones, use the name of the group associated with the Wavelength Zone (for example, us-east-1-wl1-bos-wlz-1).    message - The Zone message.    opt-in-status - The opt-in status (opted-in, and not-opted-in | opt-in-not-required).    parent-zoneID - The ID of the zone that handles some of the Local Zone and Wavelength Zone control plane operations, such as API calls.    parent-zoneName - The ID of the zone that handles some of the Local Zone and Wavelength Zone control plane operations, such as API calls.    region-name - The name of the Region for the Zone (for example, us-east-1).    state - The state of the Availability Zone, the Local Zone, or the Wavelength Zone (available | information | impaired | unavailable).    zone-id - The ID of the Availability Zone (for example, use1-az1), the Local Zone (for example, usw2-lax1-az1), or the Wavelength Zone (for example, us-east-1-wl1-bos-wlz-1).    zone-type - The type of zone, for example, local-zone.    zone-name - The name of the Availability Zone (for example, us-east-1a), the Local Zone (for example, us-west-2-lax-1a), or the Wavelength Zone (for example, us-east-1-wl1-bos-wlz-1).    zone-type - The type of zone, for example, local-zone.  
+     * The filters.    group-name - For Availability Zones, use the Region name. For Local Zones, use the name of the group associated with the Local Zone (for example, us-west-2-lax-1) For Wavelength Zones, use the name of the group associated with the Wavelength Zone (for example, us-east-1-wl1-bos-wlz-1).    message - The Zone message.    opt-in-status - The opt-in status (opted-in, and not-opted-in | opt-in-not-required).    parent-zoneID - The ID of the zone that handles some of the Local Zone and Wavelength Zone control plane operations, such as API calls.    parent-zoneName - The ID of the zone that handles some of the Local Zone and Wavelength Zone control plane operations, such as API calls.    region-name - The name of the Region for the Zone (for example, us-east-1).    state - The state of the Availability Zone, the Local Zone, or the Wavelength Zone (available).    zone-id - The ID of the Availability Zone (for example, use1-az1), the Local Zone (for example, usw2-lax1-az1), or the Wavelength Zone (for example, us-east-1-wl1-bos-wlz-1).    zone-type - The type of zone, for example, local-zone.    zone-name - The name of the Availability Zone (for example, us-east-1a), the Local Zone (for example, us-west-2-lax-1a), or the Wavelength Zone (for example, us-east-1-wl1-bos-wlz-1).    zone-type - The type of zone, for example, local-zone.  
      */
     Filters?: FilterList;
     /**
@@ -11369,7 +11472,7 @@ declare namespace EC2 {
      */
     MaxResults?: DescribeCapacityReservationsMaxResults;
     /**
-     * One or more filters.    instance-type - The type of instance for which the Capacity Reservation reserves capacity.    owner-id - The ID of the Amazon Web Services account that owns the Capacity Reservation.    instance-platform - The type of operating system for which the Capacity Reservation reserves capacity.    availability-zone - The Availability Zone of the Capacity Reservation.    tenancy - Indicates the tenancy of the Capacity Reservation. A Capacity Reservation can have one of the following tenancy settings:    default - The Capacity Reservation is created on hardware that is shared with other Amazon Web Services accounts.    dedicated - The Capacity Reservation is created on single-tenant hardware that is dedicated to a single Amazon Web Services account.      outpost-arn - The Amazon Resource Name (ARN) of the Outpost on which the Capacity Reservation was created.    state - The current state of the Capacity Reservation. A Capacity Reservation can be in one of the following states:    active- The Capacity Reservation is active and the capacity is available for your use.    expired - The Capacity Reservation expired automatically at the date and time specified in your request. The reserved capacity is no longer available for your use.    cancelled - The Capacity Reservation was cancelled. The reserved capacity is no longer available for your use.    pending - The Capacity Reservation request was successful but the capacity provisioning is still pending.    failed - The Capacity Reservation request has failed. A request might fail due to invalid request parameters, capacity constraints, or instance limit constraints. Failed requests are retained for 60 minutes.      start-date - The date and time at which the Capacity Reservation was started.    end-date - The date and time at which the Capacity Reservation expires. When a Capacity Reservation expires, the reserved capacity is released and you can no longer launch instances into it. The Capacity Reservation's state changes to expired when it reaches its end date and time.    end-date-type - Indicates the way in which the Capacity Reservation ends. A Capacity Reservation can have one of the following end types:    unlimited - The Capacity Reservation remains active until you explicitly cancel it.    limited - The Capacity Reservation expires automatically at a specified date and time.      instance-match-criteria - Indicates the type of instance launches that the Capacity Reservation accepts. The options include:    open - The Capacity Reservation accepts all instances that have matching attributes (instance type, platform, and Availability Zone). Instances that have matching attributes launch into the Capacity Reservation automatically without specifying any additional parameters.    targeted - The Capacity Reservation only accepts instances that have matching attributes (instance type, platform, and Availability Zone), and explicitly target the Capacity Reservation. This ensures that only permitted instances can use the reserved capacity.    
+     * One or more filters.    instance-type - The type of instance for which the Capacity Reservation reserves capacity.    owner-id - The ID of the Amazon Web Services account that owns the Capacity Reservation.    instance-platform - The type of operating system for which the Capacity Reservation reserves capacity.    availability-zone - The Availability Zone of the Capacity Reservation.    tenancy - Indicates the tenancy of the Capacity Reservation. A Capacity Reservation can have one of the following tenancy settings:    default - The Capacity Reservation is created on hardware that is shared with other Amazon Web Services accounts.    dedicated - The Capacity Reservation is created on single-tenant hardware that is dedicated to a single Amazon Web Services account.      outpost-arn - The Amazon Resource Name (ARN) of the Outpost on which the Capacity Reservation was created.    state - The current state of the Capacity Reservation. A Capacity Reservation can be in one of the following states:    active- The Capacity Reservation is active and the capacity is available for your use.    expired - The Capacity Reservation expired automatically at the date and time specified in your request. The reserved capacity is no longer available for your use.    cancelled - The Capacity Reservation was cancelled. The reserved capacity is no longer available for your use.    pending - The Capacity Reservation request was successful but the capacity provisioning is still pending.    failed - The Capacity Reservation request has failed. A request might fail due to invalid request parameters, capacity constraints, or instance limit constraints. Failed requests are retained for 60 minutes.      start-date - The date and time at which the Capacity Reservation was started.    end-date - The date and time at which the Capacity Reservation expires. When a Capacity Reservation expires, the reserved capacity is released and you can no longer launch instances into it. The Capacity Reservation's state changes to expired when it reaches its end date and time.    end-date-type - Indicates the way in which the Capacity Reservation ends. A Capacity Reservation can have one of the following end types:    unlimited - The Capacity Reservation remains active until you explicitly cancel it.    limited - The Capacity Reservation expires automatically at a specified date and time.      instance-match-criteria - Indicates the type of instance launches that the Capacity Reservation accepts. The options include:    open - The Capacity Reservation accepts all instances that have matching attributes (instance type, platform, and Availability Zone). Instances that have matching attributes launch into the Capacity Reservation automatically without specifying any additional parameters.    targeted - The Capacity Reservation only accepts instances that have matching attributes (instance type, platform, and Availability Zone), and explicitly target the Capacity Reservation. This ensures that only permitted instances can use the reserved capacity.      placement-group-arn - The ARN of the cluster placement group in which the Capacity Reservation was created.  
      */
     Filters?: FilterList;
     /**
@@ -11627,7 +11730,7 @@ declare namespace EC2 {
      */
     PoolIds?: CoipPoolIdSet;
     /**
-     * The filters. The following are the possible values:    coip-pool.pool-id       coip-pool.local-gateway-route-table-id   
+     * One or more filters.    coip-pool.local-gateway-route-table-id - The ID of the local gateway route table.    coip-pool.pool-id - The ID of the address pool.  
      */
     Filters?: FilterList;
     /**
@@ -12000,11 +12103,11 @@ declare namespace EC2 {
      */
     Lifecycle?: InstanceLifecycle;
     /**
-     * The error code that indicates why the instance could not be launched. For more information about error codes, see Error Codes.
+     * The error code that indicates why the instance could not be launched. For more information about error codes, see Error codes.
      */
     ErrorCode?: String;
     /**
-     * The error message that describes why the instance could not be launched. For more information about error messages, see Error Codes.
+     * The error message that describes why the instance could not be launched. For more information about error messages, see Error codes.
      */
     ErrorMessage?: String;
   }
@@ -12130,7 +12233,7 @@ declare namespace EC2 {
      */
     NextToken?: String;
     /**
-     * The ID of the EC2 Fleets.
+     * The IDs of the EC2 Fleets.  If a fleet is of type instant, you must specify the fleet ID, otherwise it does not appear in the response. 
      */
     FleetIds?: FleetIdSet;
     /**
@@ -12407,7 +12510,7 @@ declare namespace EC2 {
      */
     ExecutableUsers?: ExecutableByStringList;
     /**
-     * The filters.    architecture - The image architecture (i386 | x86_64 | arm64).    block-device-mapping.delete-on-termination - A Boolean value that indicates whether the Amazon EBS volume is deleted on instance termination.    block-device-mapping.device-name - The device name specified in the block device mapping (for example, /dev/sdh or xvdh).    block-device-mapping.snapshot-id - The ID of the snapshot used for the Amazon EBS volume.    block-device-mapping.volume-size - The volume size of the Amazon EBS volume, in GiB.    block-device-mapping.volume-type - The volume type of the Amazon EBS volume (io1 | io2 | gp2 | gp3 | sc1 | st1 | standard).    block-device-mapping.encrypted - A Boolean that indicates whether the Amazon EBS volume is encrypted.    description - The description of the image (provided during image creation).    ena-support - A Boolean that indicates whether enhanced networking with ENA is enabled.    hypervisor - The hypervisor type (ovm | xen).    image-id - The ID of the image.    image-type - The image type (machine | kernel | ramdisk).    is-public - A Boolean that indicates whether the image is public.    kernel-id - The kernel ID.    manifest-location - The location of the image manifest.    name - The name of the AMI (provided during image creation).    owner-alias - The owner alias (amazon | aws-marketplace). The valid aliases are defined in an Amazon-maintained list. This is not the Amazon Web Services account alias that can be set using the IAM console. We recommend that you use the Owner request parameter instead of this filter.    owner-id - The Amazon Web Services account ID of the owner. We recommend that you use the Owner request parameter instead of this filter.    platform - The platform. To only list Windows-based AMIs, use windows.    product-code - The product code.    product-code.type - The type of the product code (marketplace).    ramdisk-id - The RAM disk ID.    root-device-name - The device name of the root device volume (for example, /dev/sda1).    root-device-type - The type of the root device volume (ebs | instance-store).    state - The state of the image (available | pending | failed).    state-reason-code - The reason code for the state change.    state-reason-message - The message for the state change.    sriov-net-support - A value of simple indicates that enhanced networking with the Intel 82599 VF interface is enabled.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    virtualization-type - The virtualization type (paravirtual | hvm).  
+     * The filters.    architecture - The image architecture (i386 | x86_64 | arm64).    block-device-mapping.delete-on-termination - A Boolean value that indicates whether the Amazon EBS volume is deleted on instance termination.    block-device-mapping.device-name - The device name specified in the block device mapping (for example, /dev/sdh or xvdh).    block-device-mapping.snapshot-id - The ID of the snapshot used for the Amazon EBS volume.    block-device-mapping.volume-size - The volume size of the Amazon EBS volume, in GiB.    block-device-mapping.volume-type - The volume type of the Amazon EBS volume (io1 | io2 | gp2 | gp3 | sc1 | st1 | standard).    block-device-mapping.encrypted - A Boolean that indicates whether the Amazon EBS volume is encrypted.    creation-date - The time when the image was created, in the ISO 8601 format in the UTC time zone (YYYY-MM-DDThh:mm:ss.sssZ), for example, 2021-09-29T11:04:43.305Z. You can use a wildcard (*), for example, 2021-09-29T*, which matches an entire day.    description - The description of the image (provided during image creation).    ena-support - A Boolean that indicates whether enhanced networking with ENA is enabled.    hypervisor - The hypervisor type (ovm | xen).    image-id - The ID of the image.    image-type - The image type (machine | kernel | ramdisk).    is-public - A Boolean that indicates whether the image is public.    kernel-id - The kernel ID.    manifest-location - The location of the image manifest.    name - The name of the AMI (provided during image creation).    owner-alias - The owner alias (amazon | aws-marketplace). The valid aliases are defined in an Amazon-maintained list. This is not the Amazon Web Services account alias that can be set using the IAM console. We recommend that you use the Owner request parameter instead of this filter.    owner-id - The Amazon Web Services account ID of the owner. We recommend that you use the Owner request parameter instead of this filter.    platform - The platform. To only list Windows-based AMIs, use windows.    product-code - The product code.    product-code.type - The type of the product code (marketplace).    ramdisk-id - The RAM disk ID.    root-device-name - The device name of the root device volume (for example, /dev/sda1).    root-device-type - The type of the root device volume (ebs | instance-store).    state - The state of the image (available | pending | failed).    state-reason-code - The reason code for the state change.    state-reason-message - The message for the state change.    sriov-net-support - A value of simple indicates that enhanced networking with the Intel 82599 VF interface is enabled.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    virtualization-type - The virtualization type (paravirtual | hvm).  
      */
     Filters?: FilterList;
     /**
@@ -12666,7 +12769,7 @@ declare namespace EC2 {
      */
     InstanceTypes?: RequestInstanceTypeList;
     /**
-     * One or more filters. Filter names and values are case-sensitive.    auto-recovery-supported - Indicates whether auto recovery is supported (true | false).    bare-metal - Indicates whether it is a bare metal instance type (true | false).    burstable-performance-supported - Indicates whether it is a burstable performance instance type (true | false).    current-generation - Indicates whether this instance type is the latest generation instance type of an instance family (true | false).    ebs-info.ebs-optimized-info.baseline-bandwidth-in-mbps - The baseline bandwidth performance for an EBS-optimized instance type, in Mbps.    ebs-info.ebs-optimized-info.baseline-iops - The baseline input/output storage operations per second for an EBS-optimized instance type.    ebs-info.ebs-optimized-info.baseline-throughput-in-mbps - The baseline throughput performance for an EBS-optimized instance type, in MB/s.    ebs-info.ebs-optimized-info.maximum-bandwidth-in-mbps - The maximum bandwidth performance for an EBS-optimized instance type, in Mbps.    ebs-info.ebs-optimized-info.maximum-iops - The maximum input/output storage operations per second for an EBS-optimized instance type.    ebs-info.ebs-optimized-info.maximum-throughput-in-mbps - The maximum throughput performance for an EBS-optimized instance type, in MB/s.    ebs-info.ebs-optimized-support - Indicates whether the instance type is EBS-optimized (supported | unsupported | default).    ebs-info.encryption-support - Indicates whether EBS encryption is supported (supported | unsupported).    ebs-info.nvme-support - Indicates whether non-volatile memory express (NVMe) is supported for EBS volumes (required | supported | unsupported).    free-tier-eligible - Indicates whether the instance type is eligible to use in the free tier (true | false).    hibernation-supported - Indicates whether On-Demand hibernation is supported (true | false).    hypervisor - The hypervisor (nitro | xen).    instance-storage-info.disk.count - The number of local disks.    instance-storage-info.disk.size-in-gb - The storage size of each instance storage disk, in GB.    instance-storage-info.disk.type - The storage technology for the local instance storage disks (hdd | ssd).    instance-storage-info.encryption-supported - Indicates whether data is encrypted at rest (required | unsupported).    instance-storage-info.nvme-support - Indicates whether non-volatile memory express (NVMe) is supported for instance store (required | supported | unsupported).    instance-storage-info.total-size-in-gb - The total amount of storage available from all local instance storage, in GB.    instance-storage-supported - Indicates whether the instance type has local instance storage (true | false).    instance-type - The instance type (for example c5.2xlarge or c5*).    memory-info.size-in-mib - The memory size.    network-info.efa-info.maximum-efa-interfaces - The maximum number of Elastic Fabric Adapters (EFAs) per instance.    network-info.efa-supported - Indicates whether the instance type supports Elastic Fabric Adapter (EFA) (true | false).    network-info.ena-support - Indicates whether Elastic Network Adapter (ENA) is supported or required (required | supported | unsupported).    network-info.encryption-in-transit-supported - Indicates whether the instance type automatically encrypts in-transit traffic between instances (true | false).    network-info.ipv4-addresses-per-interface - The maximum number of private IPv4 addresses per network interface.    network-info.ipv6-addresses-per-interface - The maximum number of private IPv6 addresses per network interface.    network-info.ipv6-supported - Indicates whether the instance type supports IPv6 (true | false).    network-info.maximum-network-interfaces - The maximum number of network interfaces per instance.    network-info.network-performance - The network performance (for example, "25 Gigabit").    processor-info.supported-architecture - The CPU architecture (arm64 | i386 | x86_64).    processor-info.sustained-clock-speed-in-ghz - The CPU clock speed, in GHz.    supported-boot-mode - The boot mode (legacy-bios | uefi).    supported-root-device-type - The root device type (ebs | instance-store).    supported-usage-class - The usage class (on-demand | spot).    supported-virtualization-type - The virtualization type (hvm | paravirtual).    vcpu-info.default-cores - The default number of cores for the instance type.    vcpu-info.default-threads-per-core - The default number of threads per core for the instance type.    vcpu-info.default-vcpus - The default number of vCPUs for the instance type.    vcpu-info.valid-cores - The number of cores that can be configured for the instance type.    vcpu-info.valid-threads-per-core - The number of threads per core that can be configured for the instance type. For example, "1" or "1,2".  
+     * One or more filters. Filter names and values are case-sensitive.    auto-recovery-supported - Indicates whether auto recovery is supported (true | false).    bare-metal - Indicates whether it is a bare metal instance type (true | false).    burstable-performance-supported - Indicates whether it is a burstable performance instance type (true | false).    current-generation - Indicates whether this instance type is the latest generation instance type of an instance family (true | false).    ebs-info.ebs-optimized-info.baseline-bandwidth-in-mbps - The baseline bandwidth performance for an EBS-optimized instance type, in Mbps.    ebs-info.ebs-optimized-info.baseline-iops - The baseline input/output storage operations per second for an EBS-optimized instance type.    ebs-info.ebs-optimized-info.baseline-throughput-in-mbps - The baseline throughput performance for an EBS-optimized instance type, in MB/s.    ebs-info.ebs-optimized-info.maximum-bandwidth-in-mbps - The maximum bandwidth performance for an EBS-optimized instance type, in Mbps.    ebs-info.ebs-optimized-info.maximum-iops - The maximum input/output storage operations per second for an EBS-optimized instance type.    ebs-info.ebs-optimized-info.maximum-throughput-in-mbps - The maximum throughput performance for an EBS-optimized instance type, in MB/s.    ebs-info.ebs-optimized-support - Indicates whether the instance type is EBS-optimized (supported | unsupported | default).    ebs-info.encryption-support - Indicates whether EBS encryption is supported (supported | unsupported).    ebs-info.nvme-support - Indicates whether non-volatile memory express (NVMe) is supported for EBS volumes (required | supported | unsupported).    free-tier-eligible - Indicates whether the instance type is eligible to use in the free tier (true | false).    hibernation-supported - Indicates whether On-Demand hibernation is supported (true | false).    hypervisor - The hypervisor (nitro | xen).    instance-storage-info.disk.count - The number of local disks.    instance-storage-info.disk.size-in-gb - The storage size of each instance storage disk, in GB.    instance-storage-info.disk.type - The storage technology for the local instance storage disks (hdd | ssd).    instance-storage-info.encryption-support - Indicates whether data is encrypted at rest (required | supported | unsupported).    instance-storage-info.nvme-support - Indicates whether non-volatile memory express (NVMe) is supported for instance store (required | supported | unsupported).    instance-storage-info.total-size-in-gb - The total amount of storage available from all local instance storage, in GB.    instance-storage-supported - Indicates whether the instance type has local instance storage (true | false).    instance-type - The instance type (for example c5.2xlarge or c5*).    memory-info.size-in-mib - The memory size.    network-info.efa-info.maximum-efa-interfaces - The maximum number of Elastic Fabric Adapters (EFAs) per instance.    network-info.efa-supported - Indicates whether the instance type supports Elastic Fabric Adapter (EFA) (true | false).    network-info.ena-support - Indicates whether Elastic Network Adapter (ENA) is supported or required (required | supported | unsupported).    network-info.encryption-in-transit-supported - Indicates whether the instance type automatically encrypts in-transit traffic between instances (true | false).    network-info.ipv4-addresses-per-interface - The maximum number of private IPv4 addresses per network interface.    network-info.ipv6-addresses-per-interface - The maximum number of private IPv6 addresses per network interface.    network-info.ipv6-supported - Indicates whether the instance type supports IPv6 (true | false).    network-info.maximum-network-cards - The maximum number of network cards per instance.    network-info.maximum-network-interfaces - The maximum number of network interfaces per instance.    network-info.network-performance - The network performance (for example, "25 Gigabit").    processor-info.supported-architecture - The CPU architecture (arm64 | i386 | x86_64).    processor-info.sustained-clock-speed-in-ghz - The CPU clock speed, in GHz.    supported-boot-mode - The boot mode (legacy-bios | uefi).    supported-root-device-type - The root device type (ebs | instance-store).    supported-usage-class - The usage class (on-demand | spot).    supported-virtualization-type - The virtualization type (hvm | paravirtual).    vcpu-info.default-cores - The default number of cores for the instance type.    vcpu-info.default-threads-per-core - The default number of threads per core for the instance type.    vcpu-info.default-vcpus - The default number of vCPUs for the instance type.    vcpu-info.valid-cores - The number of cores that can be configured for the instance type.    vcpu-info.valid-threads-per-core - The number of threads per core that can be configured for the instance type. For example, "1" or "1,2".  
      */
     Filters?: FilterList;
     /**
@@ -12690,7 +12793,7 @@ declare namespace EC2 {
   }
   export interface DescribeInstancesRequest {
     /**
-     * The filters.    affinity - The affinity setting for an instance running on a Dedicated Host (default | host).    architecture - The instance architecture (i386 | x86_64 | arm64).    availability-zone - The Availability Zone of the instance.    block-device-mapping.attach-time - The attach time for an EBS volume mapped to the instance, for example, 2010-09-15T17:15:20.000Z.    block-device-mapping.delete-on-termination - A Boolean that indicates whether the EBS volume is deleted on instance termination.    block-device-mapping.device-name - The device name specified in the block device mapping (for example, /dev/sdh or xvdh).    block-device-mapping.status - The status for the EBS volume (attaching | attached | detaching | detached).    block-device-mapping.volume-id - The volume ID of the EBS volume.    client-token - The idempotency token you provided when you launched the instance.    dns-name - The public DNS name of the instance.    group-id - The ID of the security group for the instance. EC2-Classic only.    group-name - The name of the security group for the instance. EC2-Classic only.    hibernation-options.configured - A Boolean that indicates whether the instance is enabled for hibernation. A value of true means that the instance is enabled for hibernation.     host-id - The ID of the Dedicated Host on which the instance is running, if applicable.    hypervisor - The hypervisor type of the instance (ovm | xen). The value xen is used for both Xen and Nitro hypervisors.    iam-instance-profile.arn - The instance profile associated with the instance. Specified as an ARN.    image-id - The ID of the image used to launch the instance.    instance-id - The ID of the instance.    instance-lifecycle - Indicates whether this is a Spot Instance or a Scheduled Instance (spot | scheduled).    instance-state-code - The state of the instance, as a 16-bit unsigned integer. The high byte is used for internal purposes and should be ignored. The low byte is set based on the state represented. The valid values are: 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), and 80 (stopped).    instance-state-name - The state of the instance (pending | running | shutting-down | terminated | stopping | stopped).    instance-type - The type of instance (for example, t2.micro).    instance.group-id - The ID of the security group for the instance.     instance.group-name - The name of the security group for the instance.     ip-address - The public IPv4 address of the instance.    kernel-id - The kernel ID.    key-name - The name of the key pair used when the instance was launched.    launch-index - When launching multiple instances, this is the index for the instance in the launch group (for example, 0, 1, 2, and so on).     launch-time - The time when the instance was launched, in the ISO 8601 format in the UTC time zone (YYYY-MM-DDThh:mm:ss.sssZ), for example, 2021-09-29T11:04:43.305Z. You can use a wildcard (*), for example, 2021-09-29T*, which matches an entire day.    metadata-options.http-tokens - The metadata request authorization state (optional | required)    metadata-options.http-put-response-hop-limit - The http metadata request put response hop limit (integer, possible values 1 to 64)    metadata-options.http-endpoint - Enable or disable metadata access on http endpoint (enabled | disabled)    monitoring-state - Indicates whether detailed monitoring is enabled (disabled | enabled).    network-interface.addresses.private-ip-address - The private IPv4 address associated with the network interface.    network-interface.addresses.primary - Specifies whether the IPv4 address of the network interface is the primary private IPv4 address.    network-interface.addresses.association.public-ip - The ID of the association of an Elastic IP address (IPv4) with a network interface.    network-interface.addresses.association.ip-owner-id - The owner ID of the private IPv4 address associated with the network interface.    network-interface.association.public-ip - The address of the Elastic IP address (IPv4) bound to the network interface.    network-interface.association.ip-owner-id - The owner of the Elastic IP address (IPv4) associated with the network interface.    network-interface.association.allocation-id - The allocation ID returned when you allocated the Elastic IP address (IPv4) for your network interface.    network-interface.association.association-id - The association ID returned when the network interface was associated with an IPv4 address.    network-interface.attachment.attachment-id - The ID of the interface attachment.    network-interface.attachment.instance-id - The ID of the instance to which the network interface is attached.    network-interface.attachment.instance-owner-id - The owner ID of the instance to which the network interface is attached.    network-interface.attachment.device-index - The device index to which the network interface is attached.    network-interface.attachment.status - The status of the attachment (attaching | attached | detaching | detached).    network-interface.attachment.attach-time - The time that the network interface was attached to an instance.    network-interface.attachment.delete-on-termination - Specifies whether the attachment is deleted when an instance is terminated.    network-interface.availability-zone - The Availability Zone for the network interface.    network-interface.description - The description of the network interface.    network-interface.group-id - The ID of a security group associated with the network interface.    network-interface.group-name - The name of a security group associated with the network interface.    network-interface.ipv6-addresses.ipv6-address - The IPv6 address associated with the network interface.    network-interface.mac-address - The MAC address of the network interface.    network-interface.network-interface-id - The ID of the network interface.    network-interface.owner-id - The ID of the owner of the network interface.    network-interface.private-dns-name - The private DNS name of the network interface.    network-interface.requester-id - The requester ID for the network interface.    network-interface.requester-managed - Indicates whether the network interface is being managed by Amazon Web Services.    network-interface.status - The status of the network interface (available) | in-use).    network-interface.source-dest-check - Whether the network interface performs source/destination checking. A value of true means that checking is enabled, and false means that checking is disabled. The value must be false for the network interface to perform network address translation (NAT) in your VPC.    network-interface.subnet-id - The ID of the subnet for the network interface.    network-interface.vpc-id - The ID of the VPC for the network interface.    outpost-arn - The Amazon Resource Name (ARN) of the Outpost.    owner-id - The Amazon Web Services account ID of the instance owner.    placement-group-name - The name of the placement group for the instance.    placement-partition-number - The partition in which the instance is located.    platform - The platform. To list only Windows instances, use windows.    private-dns-name - The private IPv4 DNS name of the instance.    private-ip-address - The private IPv4 address of the instance.    product-code - The product code associated with the AMI used to launch the instance.    product-code.type - The type of product code (devpay | marketplace).    ramdisk-id - The RAM disk ID.    reason - The reason for the current state of the instance (for example, shows "User Initiated [date]" when you stop or terminate the instance). Similar to the state-reason-code filter.    requester-id - The ID of the entity that launched the instance on your behalf (for example, Amazon Web Services Management Console, Auto Scaling, and so on).    reservation-id - The ID of the instance's reservation. A reservation ID is created any time you launch an instance. A reservation ID has a one-to-one relationship with an instance launch request, but can be associated with more than one instance if you launch multiple instances using the same launch request. For example, if you launch one instance, you get one reservation ID. If you launch ten instances using the same launch request, you also get one reservation ID.    root-device-name - The device name of the root device volume (for example, /dev/sda1).    root-device-type - The type of the root device volume (ebs | instance-store).    source-dest-check - Indicates whether the instance performs source/destination checking. A value of true means that checking is enabled, and false means that checking is disabled. The value must be false for the instance to perform network address translation (NAT) in your VPC.     spot-instance-request-id - The ID of the Spot Instance request.    state-reason-code - The reason code for the state change.    state-reason-message - A message that describes the state change.    subnet-id - The ID of the subnet for the instance.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources that have a tag with a specific key, regardless of the tag value.    tenancy - The tenancy of an instance (dedicated | default | host).    virtualization-type - The virtualization type of the instance (paravirtual | hvm).    vpc-id - The ID of the VPC that the instance is running in.  
+     * The filters.    affinity - The affinity setting for an instance running on a Dedicated Host (default | host).    architecture - The instance architecture (i386 | x86_64 | arm64).    availability-zone - The Availability Zone of the instance.    block-device-mapping.attach-time - The attach time for an EBS volume mapped to the instance, for example, 2010-09-15T17:15:20.000Z.    block-device-mapping.delete-on-termination - A Boolean that indicates whether the EBS volume is deleted on instance termination.    block-device-mapping.device-name - The device name specified in the block device mapping (for example, /dev/sdh or xvdh).    block-device-mapping.status - The status for the EBS volume (attaching | attached | detaching | detached).    block-device-mapping.volume-id - The volume ID of the EBS volume.    capacity-reservation-id - The ID of the Capacity Reservation into which the instance was launched.    client-token - The idempotency token you provided when you launched the instance.    dns-name - The public DNS name of the instance.    group-id - The ID of the security group for the instance. EC2-Classic only.    group-name - The name of the security group for the instance. EC2-Classic only.    hibernation-options.configured - A Boolean that indicates whether the instance is enabled for hibernation. A value of true means that the instance is enabled for hibernation.     host-id - The ID of the Dedicated Host on which the instance is running, if applicable.    hypervisor - The hypervisor type of the instance (ovm | xen). The value xen is used for both Xen and Nitro hypervisors.    iam-instance-profile.arn - The instance profile associated with the instance. Specified as an ARN.    image-id - The ID of the image used to launch the instance.    instance-id - The ID of the instance.    instance-lifecycle - Indicates whether this is a Spot Instance or a Scheduled Instance (spot | scheduled).    instance-state-code - The state of the instance, as a 16-bit unsigned integer. The high byte is used for internal purposes and should be ignored. The low byte is set based on the state represented. The valid values are: 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), and 80 (stopped).    instance-state-name - The state of the instance (pending | running | shutting-down | terminated | stopping | stopped).    instance-type - The type of instance (for example, t2.micro).    instance.group-id - The ID of the security group for the instance.     instance.group-name - The name of the security group for the instance.     ip-address - The public IPv4 address of the instance.    kernel-id - The kernel ID.    key-name - The name of the key pair used when the instance was launched.    launch-index - When launching multiple instances, this is the index for the instance in the launch group (for example, 0, 1, 2, and so on).     launch-time - The time when the instance was launched, in the ISO 8601 format in the UTC time zone (YYYY-MM-DDThh:mm:ss.sssZ), for example, 2021-09-29T11:04:43.305Z. You can use a wildcard (*), for example, 2021-09-29T*, which matches an entire day.    metadata-options.http-tokens - The metadata request authorization state (optional | required)    metadata-options.http-put-response-hop-limit - The http metadata request put response hop limit (integer, possible values 1 to 64)    metadata-options.http-endpoint - Enable or disable metadata access on http endpoint (enabled | disabled)    monitoring-state - Indicates whether detailed monitoring is enabled (disabled | enabled).    network-interface.addresses.private-ip-address - The private IPv4 address associated with the network interface.    network-interface.addresses.primary - Specifies whether the IPv4 address of the network interface is the primary private IPv4 address.    network-interface.addresses.association.public-ip - The ID of the association of an Elastic IP address (IPv4) with a network interface.    network-interface.addresses.association.ip-owner-id - The owner ID of the private IPv4 address associated with the network interface.    network-interface.association.public-ip - The address of the Elastic IP address (IPv4) bound to the network interface.    network-interface.association.ip-owner-id - The owner of the Elastic IP address (IPv4) associated with the network interface.    network-interface.association.allocation-id - The allocation ID returned when you allocated the Elastic IP address (IPv4) for your network interface.    network-interface.association.association-id - The association ID returned when the network interface was associated with an IPv4 address.    network-interface.attachment.attachment-id - The ID of the interface attachment.    network-interface.attachment.instance-id - The ID of the instance to which the network interface is attached.    network-interface.attachment.instance-owner-id - The owner ID of the instance to which the network interface is attached.    network-interface.attachment.device-index - The device index to which the network interface is attached.    network-interface.attachment.status - The status of the attachment (attaching | attached | detaching | detached).    network-interface.attachment.attach-time - The time that the network interface was attached to an instance.    network-interface.attachment.delete-on-termination - Specifies whether the attachment is deleted when an instance is terminated.    network-interface.availability-zone - The Availability Zone for the network interface.    network-interface.description - The description of the network interface.    network-interface.group-id - The ID of a security group associated with the network interface.    network-interface.group-name - The name of a security group associated with the network interface.    network-interface.ipv6-addresses.ipv6-address - The IPv6 address associated with the network interface.    network-interface.mac-address - The MAC address of the network interface.    network-interface.network-interface-id - The ID of the network interface.    network-interface.owner-id - The ID of the owner of the network interface.    network-interface.private-dns-name - The private DNS name of the network interface.    network-interface.requester-id - The requester ID for the network interface.    network-interface.requester-managed - Indicates whether the network interface is being managed by Amazon Web Services.    network-interface.status - The status of the network interface (available) | in-use).    network-interface.source-dest-check - Whether the network interface performs source/destination checking. A value of true means that checking is enabled, and false means that checking is disabled. The value must be false for the network interface to perform network address translation (NAT) in your VPC.    network-interface.subnet-id - The ID of the subnet for the network interface.    network-interface.vpc-id - The ID of the VPC for the network interface.    outpost-arn - The Amazon Resource Name (ARN) of the Outpost.    owner-id - The Amazon Web Services account ID of the instance owner.    placement-group-name - The name of the placement group for the instance.    placement-partition-number - The partition in which the instance is located.    platform - The platform. To list only Windows instances, use windows.    private-dns-name - The private IPv4 DNS name of the instance.    private-ip-address - The private IPv4 address of the instance.    product-code - The product code associated with the AMI used to launch the instance.    product-code.type - The type of product code (devpay | marketplace).    ramdisk-id - The RAM disk ID.    reason - The reason for the current state of the instance (for example, shows "User Initiated [date]" when you stop or terminate the instance). Similar to the state-reason-code filter.    requester-id - The ID of the entity that launched the instance on your behalf (for example, Amazon Web Services Management Console, Auto Scaling, and so on).    reservation-id - The ID of the instance's reservation. A reservation ID is created any time you launch an instance. A reservation ID has a one-to-one relationship with an instance launch request, but can be associated with more than one instance if you launch multiple instances using the same launch request. For example, if you launch one instance, you get one reservation ID. If you launch ten instances using the same launch request, you also get one reservation ID.    root-device-name - The device name of the root device volume (for example, /dev/sda1).    root-device-type - The type of the root device volume (ebs | instance-store).    source-dest-check - Indicates whether the instance performs source/destination checking. A value of true means that checking is enabled, and false means that checking is disabled. The value must be false for the instance to perform network address translation (NAT) in your VPC.     spot-instance-request-id - The ID of the Spot Instance request.    state-reason-code - The reason code for the state change.    state-reason-message - A message that describes the state change.    subnet-id - The ID of the subnet for the instance.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources that have a tag with a specific key, regardless of the tag value.    tenancy - The tenancy of an instance (dedicated | default | host).    virtualization-type - The virtualization type of the instance (paravirtual | hvm).    vpc-id - The ID of the VPC that the instance is running in.  
      */
     Filters?: FilterList;
     /**
@@ -12898,6 +13001,10 @@ declare namespace EC2 {
      * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
      */
     DryRun?: Boolean;
+    /**
+     * If true, the public key material is included in the response. Default: false 
+     */
+    IncludePublicKey?: Boolean;
   }
   export interface DescribeKeyPairsResult {
     /**
@@ -12996,7 +13103,7 @@ declare namespace EC2 {
      */
     LocalGatewayRouteTableVirtualInterfaceGroupAssociationIds?: LocalGatewayRouteTableVirtualInterfaceGroupAssociationIdSet;
     /**
-     * One or more filters.    local-gateway-id - The ID of a local gateway.    local-gateway-route-table-id - The ID of the local gateway route table.    local-gateway-route-table-virtual-interface-group-association-id - The ID of the association.    local-gateway-route-table-virtual-interface-group-id - The ID of the virtual interface group.    state - The state of the association.  
+     * One or more filters.    local-gateway-id - The ID of a local gateway.    local-gateway-route-table-arn - The Amazon Resource Name (ARN) of the local gateway route table for the virtual interface group.    local-gateway-route-table-id - The ID of the local gateway route table.    local-gateway-route-table-virtual-interface-group-association-id - The ID of the association.    local-gateway-route-table-virtual-interface-group-id - The ID of the virtual interface group.    owner-id - The ID of the Amazon Web Services account that owns the local gateway virtual interface group association.    state - The state of the association.  
      */
     Filters?: FilterList;
     /**
@@ -13028,7 +13135,7 @@ declare namespace EC2 {
      */
     LocalGatewayRouteTableVpcAssociationIds?: LocalGatewayRouteTableVpcAssociationIdSet;
     /**
-     * One or more filters.    local-gateway-id - The ID of a local gateway.    local-gateway-route-table-id - The ID of the local gateway route table.    local-gateway-route-table-vpc-association-id - The ID of the association.    state - The state of the association.    vpc-id - The ID of the VPC.  
+     * One or more filters.    local-gateway-id - The ID of a local gateway.    local-gateway-route-table-arn - The Amazon Resource Name (ARN) of the local gateway route table for the association.    local-gateway-route-table-id - The ID of the local gateway route table.    local-gateway-route-table-vpc-association-id - The ID of the association.    owner-id - The ID of the Amazon Web Services account that owns the local gateway route table for the association.    state - The state of the association.    vpc-id - The ID of the VPC.  
      */
     Filters?: FilterList;
     /**
@@ -13060,7 +13167,7 @@ declare namespace EC2 {
      */
     LocalGatewayRouteTableIds?: LocalGatewayRouteTableIdSet;
     /**
-     * One or more filters.    local-gateway-id - The ID of a local gateway.    local-gateway-route-table-id - The ID of a local gateway route table.    outpost-arn - The Amazon Resource Name (ARN) of the Outpost.    state - The state of the local gateway route table.  
+     * One or more filters.    local-gateway-id - The ID of a local gateway.    local-gateway-route-table-arn - The Amazon Resource Name (ARN) of the local gateway route table.    local-gateway-route-table-id - The ID of a local gateway route table.    outpost-arn - The Amazon Resource Name (ARN) of the Outpost.    owner-id - The ID of the Amazon Web Services account that owns the local gateway route table.    state - The state of the local gateway route table.  
      */
     Filters?: FilterList;
     /**
@@ -13092,7 +13199,7 @@ declare namespace EC2 {
      */
     LocalGatewayVirtualInterfaceGroupIds?: LocalGatewayVirtualInterfaceGroupIdSet;
     /**
-     * One or more filters.    local-gateway-id - The ID of a local gateway.    local-gateway-virtual-interface-id - The ID of the virtual interface.    local-gateway-virtual-interface-group-id - The ID of the virtual interface group.  
+     * One or more filters.    local-gateway-id - The ID of a local gateway.    local-gateway-virtual-interface-group-id - The ID of the virtual interface group.    local-gateway-virtual-interface-id - The ID of the virtual interface.    owner-id - The ID of the Amazon Web Services account that owns the local gateway virtual interface group.  
      */
     Filters?: FilterList;
     /**
@@ -13124,7 +13231,7 @@ declare namespace EC2 {
      */
     LocalGatewayVirtualInterfaceIds?: LocalGatewayVirtualInterfaceIdSet;
     /**
-     * One or more filters.
+     * One or more filters.    local-address - The local address.    local-bgp-asn - The Border Gateway Protocol (BGP) Autonomous System Number (ASN) of the local gateway.    local-gateway-id - The ID of the local gateway.    local-gateway-virtual-interface-id - The ID of the virtual interface.    owner-id - The ID of the Amazon Web Services account that owns the local gateway virtual interface.    peer-address - The peer address.    peer-bgp-asn - The peer BGP ASN.    vlan - The ID of the VLAN.  
      */
     Filters?: FilterList;
     /**
@@ -13152,11 +13259,11 @@ declare namespace EC2 {
   }
   export interface DescribeLocalGatewaysRequest {
     /**
-     * One or more filters.    local-gateway-id - The ID of a local gateway.    local-gateway-route-table-id - The ID of the local gateway route table.    local-gateway-route-table-virtual-interface-group-association-id - The ID of the association.    local-gateway-route-table-virtual-interface-group-id - The ID of the virtual interface group.    outpost-arn - The Amazon Resource Name (ARN) of the Outpost.    state - The state of the association.  
+     * The IDs of the local gateways.
      */
     LocalGatewayIds?: LocalGatewayIdSet;
     /**
-     * One or more filters.
+     * One or more filters.    local-gateway-id - The ID of a local gateway.    outpost-arn - The Amazon Resource Name (ARN) of the Outpost.    owner-id - The ID of the Amazon Web Services account that owns the local gateway.    state - The state of the association.  
      */
     Filters?: FilterList;
     /**
@@ -13407,7 +13514,7 @@ declare namespace EC2 {
      */
     AnalysisEndTime?: MillisecondDateTime;
     /**
-     * The filters. The following are possible values:   PathFound - A Boolean value that indicates whether a feasible path is found.   Status - The status of the analysis (running | succeeded | failed).  
+     * The filters. The following are the possible values:   PathFound - A Boolean value that indicates whether a feasible path is found.   Status - The status of the analysis (running | succeeded | failed).  
      */
     Filters?: FilterList;
     /**
@@ -13439,7 +13546,7 @@ declare namespace EC2 {
      */
     NetworkInsightsPathIds?: NetworkInsightsPathIdList;
     /**
-     * The filters. The following are possible values:   Destination - The ID of the resource.   DestinationPort - The destination port.   Name - The path name.   Protocol - The protocol.   Source - The ID of the resource.  
+     * The filters. The following are the possible values:   Destination - The ID of the resource.   DestinationPort - The destination port.   Name - The path name.   Protocol - The protocol.   Source - The ID of the resource.  
      */
     Filters?: FilterList;
     /**
@@ -13533,7 +13640,7 @@ declare namespace EC2 {
   export type DescribeNetworkInterfacesMaxResults = number;
   export interface DescribeNetworkInterfacesRequest {
     /**
-     * One or more filters.    addresses.private-ip-address - The private IPv4 addresses associated with the network interface.    addresses.primary - Whether the private IPv4 address is the primary IP address associated with the network interface.     addresses.association.public-ip - The association ID returned when the network interface was associated with the Elastic IP address (IPv4).    addresses.association.owner-id - The owner ID of the addresses associated with the network interface.    association.association-id - The association ID returned when the network interface was associated with an IPv4 address.    association.allocation-id - The allocation ID returned when you allocated the Elastic IP address (IPv4) for your network interface.    association.ip-owner-id - The owner of the Elastic IP address (IPv4) associated with the network interface.    association.public-ip - The address of the Elastic IP address (IPv4) bound to the network interface.    association.public-dns-name - The public DNS name for the network interface (IPv4).    attachment.attachment-id - The ID of the interface attachment.    attachment.attach-time - The time that the network interface was attached to an instance.    attachment.delete-on-termination - Indicates whether the attachment is deleted when an instance is terminated.    attachment.device-index - The device index to which the network interface is attached.    attachment.instance-id - The ID of the instance to which the network interface is attached.    attachment.instance-owner-id - The owner ID of the instance to which the network interface is attached.    attachment.status - The status of the attachment (attaching | attached | detaching | detached).    availability-zone - The Availability Zone of the network interface.    description - The description of the network interface.    group-id - The ID of a security group associated with the network interface.    group-name - The name of a security group associated with the network interface.    ipv6-addresses.ipv6-address - An IPv6 address associated with the network interface.    mac-address - The MAC address of the network interface.    network-interface-id - The ID of the network interface.    owner-id - The Amazon Web Services account ID of the network interface owner.    private-ip-address - The private IPv4 address or addresses of the network interface.    private-dns-name - The private DNS name of the network interface (IPv4).    requester-id - The alias or Amazon Web Services account ID of the principal or service that created the network interface.    requester-managed - Indicates whether the network interface is being managed by an Amazon Web Service (for example, Amazon Web Services Management Console, Auto Scaling, and so on).    source-dest-check - Indicates whether the network interface performs source/destination checking. A value of true means checking is enabled, and false means checking is disabled. The value must be false for the network interface to perform network address translation (NAT) in your VPC.     status - The status of the network interface. If the network interface is not attached to an instance, the status is available; if a network interface is attached to an instance the status is in-use.    subnet-id - The ID of the subnet for the network interface.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC for the network interface.  
+     * One or more filters.    addresses.private-ip-address - The private IPv4 addresses associated with the network interface.    addresses.primary - Whether the private IPv4 address is the primary IP address associated with the network interface.     addresses.association.public-ip - The association ID returned when the network interface was associated with the Elastic IP address (IPv4).    addresses.association.owner-id - The owner ID of the addresses associated with the network interface.    association.association-id - The association ID returned when the network interface was associated with an IPv4 address.    association.allocation-id - The allocation ID returned when you allocated the Elastic IP address (IPv4) for your network interface.    association.ip-owner-id - The owner of the Elastic IP address (IPv4) associated with the network interface.    association.public-ip - The address of the Elastic IP address (IPv4) bound to the network interface.    association.public-dns-name - The public DNS name for the network interface (IPv4).    attachment.attachment-id - The ID of the interface attachment.    attachment.attach-time - The time that the network interface was attached to an instance.    attachment.delete-on-termination - Indicates whether the attachment is deleted when an instance is terminated.    attachment.device-index - The device index to which the network interface is attached.    attachment.instance-id - The ID of the instance to which the network interface is attached.    attachment.instance-owner-id - The owner ID of the instance to which the network interface is attached.    attachment.status - The status of the attachment (attaching | attached | detaching | detached).    availability-zone - The Availability Zone of the network interface.    description - The description of the network interface.    group-id - The ID of a security group associated with the network interface.    group-name - The name of a security group associated with the network interface.    ipv6-addresses.ipv6-address - An IPv6 address associated with the network interface.    interface-type - The type of network interface (api_gateway_managed | aws_codestar_connections_managed | branch | efa | gateway_load_balancer | gateway_load_balancer_endpoint | global_accelerator_managed | interface | iot_rules_managed | lambda | load_balancer | nat_gateway | network_load_balancer | quicksight | transit_gateway | trunk | vpc_endpoint).    mac-address - The MAC address of the network interface.    network-interface-id - The ID of the network interface.    owner-id - The Amazon Web Services account ID of the network interface owner.    private-ip-address - The private IPv4 address or addresses of the network interface.    private-dns-name - The private DNS name of the network interface (IPv4).    requester-id - The alias or Amazon Web Services account ID of the principal or service that created the network interface.    requester-managed - Indicates whether the network interface is being managed by an Amazon Web Service (for example, Amazon Web Services Management Console, Auto Scaling, and so on).    source-dest-check - Indicates whether the network interface performs source/destination checking. A value of true means checking is enabled, and false means checking is disabled. The value must be false for the network interface to perform network address translation (NAT) in your VPC.     status - The status of the network interface. If the network interface is not attached to an instance, the status is available; if a network interface is attached to an instance the status is in-use.    subnet-id - The ID of the subnet for the network interface.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC for the network interface.  
      */
     Filters?: FilterList;
     /**
@@ -15121,7 +15228,7 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * One or more filters.    service-id - The ID of the service.    vpc-endpoint-owner - The ID of the Amazon Web Services account ID that owns the endpoint.    vpc-endpoint-state - The state of the endpoint (pendingAcceptance | pending | available | deleting | deleted | rejected | failed).    vpc-endpoint-id - The ID of the endpoint.  
+     * One or more filters.    ip-address-type - The IP address type (ipv4 | ipv6).    service-id - The ID of the service.    vpc-endpoint-owner - The ID of the Amazon Web Services account ID that owns the endpoint.    vpc-endpoint-state - The state of the endpoint (pendingAcceptance | pending | available | deleting | deleted | rejected | failed).    vpc-endpoint-id - The ID of the endpoint.  
      */
     Filters?: FilterList;
     /**
@@ -15153,7 +15260,7 @@ declare namespace EC2 {
      */
     ServiceIds?: VpcEndpointServiceIdList;
     /**
-     * One or more filters.    service-name - The name of the service.    service-id - The ID of the service.    service-state - The state of the service (Pending | Available | Deleting | Deleted | Failed).     tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.  
+     * One or more filters.    service-name - The name of the service.    service-id - The ID of the service.    service-state - The state of the service (Pending | Available | Deleting | Deleted | Failed).     supported-ip-address-types - The IP address type (ipv4 | ipv6).    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.  
      */
     Filters?: FilterList;
     /**
@@ -15217,7 +15324,7 @@ declare namespace EC2 {
      */
     ServiceNames?: ValueStringList;
     /**
-     * One or more filters.    service-name - The name of the service.    service-type - The type of service (Interface | Gateway).    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.  
+     * One or more filters.    service-name - The name of the service.    service-type - The type of service (Interface | Gateway).    supported-ip-address-types - The IP address type (ipv4 | ipv6).    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.  
      */
     Filters?: FilterList;
     /**
@@ -15253,7 +15360,7 @@ declare namespace EC2 {
      */
     VpcEndpointIds?: VpcEndpointIdList;
     /**
-     * One or more filters.    service-name - The name of the service.    vpc-id - The ID of the VPC in which the endpoint resides.    vpc-endpoint-id - The ID of the endpoint.    vpc-endpoint-state - The state of the endpoint (pendingAcceptance | pending | available | deleting | deleted | rejected | failed).    vpc-endpoint-type - The type of VPC endpoint (Interface | Gateway | GatewayLoadBalancer).    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.  
+     * One or more filters.    ip-address-type - The IP address type (ipv4 | ipv6).    service-name - The name of the service.    vpc-id - The ID of the VPC in which the endpoint resides.    vpc-endpoint-id - The ID of the endpoint.    vpc-endpoint-state - The state of the endpoint (pendingAcceptance | pending | available | deleting | deleted | rejected | failed).    vpc-endpoint-type - The type of VPC endpoint (Interface | Gateway | GatewayLoadBalancer).    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.  
      */
     Filters?: FilterList;
     /**
@@ -16105,6 +16212,19 @@ declare namespace EC2 {
   }
   export type DnsEntrySet = DnsEntry[];
   export type DnsNameState = "pendingVerification"|"verified"|"failed"|string;
+  export interface DnsOptions {
+    /**
+     * The DNS records created for the endpoint.
+     */
+    DnsRecordIpType?: DnsRecordIpType;
+  }
+  export interface DnsOptionsSpecification {
+    /**
+     * The DNS records created for the endpoint.
+     */
+    DnsRecordIpType?: DnsRecordIpType;
+  }
+  export type DnsRecordIpType = "ipv4"|"dualstack"|"ipv6"|"service-defined"|string;
   export interface DnsServersOptionsModifyStructure {
     /**
      * The IPv4 address range, in CIDR notation, of the DNS servers to be used. You can specify up to two DNS servers. Ensure that the DNS servers can be reached by the clients. The specified values overwrite the existing values.
@@ -16149,11 +16269,11 @@ declare namespace EC2 {
      */
     Throughput?: Integer;
     /**
-     * The ARN of the Outpost on which the snapshot is stored.
+     * The ARN of the Outpost on which the snapshot is stored. This parameter is only supported on BlockDeviceMapping objects called by  CreateImage.
      */
     OutpostArn?: String;
     /**
-     * Indicates whether the encryption state of an EBS volume is changed while being restored from a backing snapshot. The effect of setting the encryption state to true depends on the volume origin (new or from a snapshot), starting encryption state, ownership, and whether encryption by default is enabled. For more information, see Amazon EBS encryption in the Amazon EC2 User Guide. In no case can you remove encryption from an encrypted volume. Encrypted volumes can only be attached to instances that support Amazon EBS encryption. For more information, see Supported instance types. This parameter is not returned by .
+     * Indicates whether the encryption state of an EBS volume is changed while being restored from a backing snapshot. The effect of setting the encryption state to true depends on the volume origin (new or from a snapshot), starting encryption state, ownership, and whether encryption by default is enabled. For more information, see Amazon EBS encryption in the Amazon EC2 User Guide. In no case can you remove encryption from an encrypted volume. Encrypted volumes can only be attached to instances that support Amazon EBS encryption. For more information, see Supported instance types. This parameter is not returned by DescribeImageAttribute.
      */
     Encrypted?: Boolean;
   }
@@ -16394,7 +16514,7 @@ declare namespace EC2 {
      */
     LaunchTemplate?: FastLaunchLaunchTemplateSpecificationRequest;
     /**
-     * The maximum number of parallel instances to launch for creating resources.
+     * The maximum number of parallel instances to launch for creating resources. Value must be 6 or greater. 
      */
     MaxParallelLaunches?: Integer;
     /**
@@ -16746,7 +16866,7 @@ declare namespace EC2 {
      */
     DestinationVpc?: AnalysisComponent;
     /**
-     * The direction. The following are possible values:   egress   ingress  
+     * The direction. The following are the possible values:   egress   ingress  
      */
     Direction?: String;
     /**
@@ -16881,6 +17001,22 @@ declare namespace EC2 {
      * The VPN gateway.
      */
     VpnGateway?: AnalysisComponent;
+    /**
+     * The transit gateway.
+     */
+    TransitGateway?: AnalysisComponent;
+    /**
+     * The transit gateway route table.
+     */
+    TransitGatewayRouteTable?: AnalysisComponent;
+    /**
+     * The transit gateway route table route.
+     */
+    TransitGatewayRouteTableRoute?: TransitGatewayRouteTableRoute;
+    /**
+     * The transit gateway attachment.
+     */
+    TransitGatewayAttachment?: AnalysisComponent;
   }
   export type ExplanationList = Explanation[];
   export interface ExportClientVpnClientCertificateRevocationListRequest {
@@ -17314,7 +17450,7 @@ declare namespace EC2 {
      */
     FleetState?: FleetStateCode;
     /**
-     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see Ensuring Idempotency. Constraints: Maximum 64 ASCII characters
+     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see Ensuring idempotency. Constraints: Maximum 64 ASCII characters
      */
     ClientToken?: String;
     /**
@@ -17851,9 +17987,9 @@ declare namespace EC2 {
     /**
      * The ID of the address pool.
      */
-    PoolId: CoipPoolId;
+    PoolId: Ipv4PoolCoipId;
     /**
-     * The filters. The following are the possible values:    coip-address-usage.allocation-id       coip-address-usage.aws-account-id       coip-address-usage.aws-service       coip-address-usage.co-ip   
+     * One or more filters.    coip-address-usage.allocation-id - The allocation ID of the address.    coip-address-usage.aws-account-id - The ID of the Amazon Web Services account that is using the customer-owned IP address.    coip-address-usage.aws-service - The Amazon Web Services service that is using the customer-owned IP address.    coip-address-usage.co-ip - The customer-owned IP address.  
      */
     Filters?: FilterList;
     /**
@@ -18092,6 +18228,26 @@ declare namespace EC2 {
      */
     NextToken?: String;
   }
+  export interface GetInstanceUefiDataRequest {
+    /**
+     * The ID of the instance from which to retrieve the UEFI data.
+     */
+    InstanceId: InstanceId;
+    /**
+     * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
+     */
+    DryRun?: Boolean;
+  }
+  export interface GetInstanceUefiDataResult {
+    /**
+     * The ID of the instance from which to retrieve the UEFI data.
+     */
+    InstanceId?: InstanceId;
+    /**
+     * Base64 representation of the non-volatile UEFI variable store.
+     */
+    UefiData?: String;
+  }
   export interface GetIpamAddressHistoryRequest {
     /**
      * A check for whether you have the required permissions for the action without actually making the request and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
@@ -18930,6 +19086,10 @@ declare namespace EC2 {
      * Indicates whether the Dedicated Host is in a host resource group. If memberOfServiceLinkedResourceGroup is true, the host is in a host resource group; otherwise, it is not.
      */
     MemberOfServiceLinkedResourceGroup?: Boolean;
+    /**
+     * The Amazon Resource Name (ARN) of the Amazon Web Services Outpost on which the Dedicated Host is allocated.
+     */
+    OutpostArn?: String;
   }
   export interface HostInstance {
     /**
@@ -19261,6 +19421,10 @@ declare namespace EC2 {
      * The boot mode of the image. For more information, see Boot modes in the Amazon Elastic Compute Cloud User Guide.
      */
     BootMode?: BootModeValues;
+    /**
+     * If the image is configured for NitroTPM support, the value is v2.0. For more information, see NitroTPM in the Amazon Elastic Compute Cloud User Guide.
+     */
+    TpmSupport?: TpmSupportValues;
     /**
      * The date and time to deprecate the AMI, in UTC, in the following format: YYYY-MM-DDTHH:MM:SSZ. If you specified a value for seconds, Amazon EC2 rounds the seconds to the nearest minute.
      */
@@ -19299,9 +19463,24 @@ declare namespace EC2 {
      * Indicates whether enhanced networking with the Intel 82599 Virtual Function interface is enabled.
      */
     SriovNetSupport?: AttributeValue;
+    /**
+     * The boot mode.
+     */
     BootMode?: AttributeValue;
+    /**
+     * If the image is configured for NitroTPM support, the value is v2.0.
+     */
+    TpmSupport?: AttributeValue;
+    /**
+     * Base64 representation of the non-volatile UEFI variable store. To retrieve the UEFI data, use the GetInstanceUefiData command. You can inspect and modify the UEFI data by using the python-uefivars tool on GitHub. For more information, see UEFI Secure Boot in the Amazon Elastic Compute Cloud User Guide.
+     */
+    UefiData?: AttributeValue;
+    /**
+     * The date and time, in ISO 8601 date-time format, when the AMI was last used to launch an EC2 instance. When the AMI is used, there is a 24-hour delay before that usage is reported.   lastLaunchedTime data is available starting April 2017. 
+     */
+    LastLaunchedTime?: AttributeValue;
   }
-  export type ImageAttributeName = "description"|"kernel"|"ramdisk"|"launchPermission"|"productCodes"|"blockDeviceMapping"|"sriovNetSupport"|"bootMode"|string;
+  export type ImageAttributeName = "description"|"kernel"|"ramdisk"|"launchPermission"|"productCodes"|"blockDeviceMapping"|"sriovNetSupport"|"bootMode"|"tpmSupport"|"uefiData"|"lastLaunchedTime"|string;
   export interface ImageDiskContainer {
     /**
      * The description of the disk image.
@@ -19333,6 +19512,29 @@ declare namespace EC2 {
   export type ImageIdList = ImageId[];
   export type ImageIdStringList = ImageId[];
   export type ImageList = Image[];
+  export interface ImageRecycleBinInfo {
+    /**
+     * The ID of the AMI.
+     */
+    ImageId?: String;
+    /**
+     * The name of the AMI.
+     */
+    Name?: String;
+    /**
+     * The description of the AMI.
+     */
+    Description?: String;
+    /**
+     * The date and time when the AMI entered the Recycle Bin.
+     */
+    RecycleBinEnterTime?: MillisecondDateTime;
+    /**
+     * The date and time when the AMI is to be permanently deleted from the Recycle Bin.
+     */
+    RecycleBinExitTime?: MillisecondDateTime;
+  }
+  export type ImageRecycleBinInfoList = ImageRecycleBinInfo[];
   export type ImageState = "pending"|"available"|"invalid"|"deregistered"|"transient"|"failed"|"error"|string;
   export type ImageTypeValues = "machine"|"kernel"|"ramdisk"|string;
   export interface ImportClientVpnClientCertificateRevocationListRequest {
@@ -19716,7 +19918,7 @@ declare namespace EC2 {
   }
   export interface ImportKeyPairResult {
     /**
-     * The MD5 public key fingerprint as specified in section 4 of RFC 4716.
+     *   For RSA key pairs, the key fingerprint is the MD5 public key fingerprint as specified in section 4 of RFC 4716.   For ED25519 key pairs, the key fingerprint is the base64-encoded SHA-256 digest, which is the default for OpenSSH, starting with OpenSSH 6.8.  
      */
     KeyFingerprint?: String;
     /**
@@ -20103,6 +20305,14 @@ declare namespace EC2 {
      * The IPv6 address assigned to the instance.
      */
     Ipv6Address?: String;
+    /**
+     * If the instance is configured for NitroTPM support, the value is v2.0. For more information, see NitroTPM in the Amazon EC2 User Guide.
+     */
+    TpmSupport?: String;
+    /**
+     * Provides information on the recovery and maintenance options of your instance.
+     */
+    MaintenanceOptions?: InstanceMaintenanceOptions;
   }
   export interface InstanceAttribute {
     /**
@@ -20171,6 +20381,7 @@ declare namespace EC2 {
     UserData?: AttributeValue;
   }
   export type InstanceAttributeName = "instanceType"|"kernel"|"ramdisk"|"userData"|"disableApiTermination"|"instanceInitiatedShutdownBehavior"|"rootDeviceName"|"blockDeviceMapping"|"productCodes"|"sourceDestCheck"|"groupSet"|"ebsOptimized"|"sriovNetSupport"|"enaSupport"|"enclaveOptions"|string;
+  export type InstanceAutoRecoveryState = "disabled"|"default"|string;
   export interface InstanceBlockDeviceMapping {
     /**
      * The device name (for example, /dev/sdh or xvdh).
@@ -20434,6 +20645,18 @@ declare namespace EC2 {
   export type InstanceLifecycle = "spot"|"on-demand"|string;
   export type InstanceLifecycleType = "spot"|"scheduled"|string;
   export type InstanceList = Instance[];
+  export interface InstanceMaintenanceOptions {
+    /**
+     * Provides information on the current automatic recovery behavior of your instance.
+     */
+    AutoRecovery?: InstanceAutoRecoveryState;
+  }
+  export interface InstanceMaintenanceOptionsRequest {
+    /**
+     * Disables the automatic recovery behavior of your instance or sets it to default. For more information, see Simplified automatic recovery.
+     */
+    AutoRecovery?: InstanceAutoRecoveryState;
+  }
   export interface InstanceMarketOptionsRequest {
     /**
      * The market type.
@@ -20570,7 +20793,7 @@ declare namespace EC2 {
      */
     VpcId?: String;
     /**
-     * Describes the type of network interface. Valid values: interface | efa | trunk 
+     * The type of network interface. Valid values: interface | efa | trunk 
      */
     InterfaceType?: String;
     /**
@@ -20685,7 +20908,7 @@ declare namespace EC2 {
      */
     AssociateCarrierIpAddress?: Boolean;
     /**
-     * The type of network interface. To create an Elastic Fabric Adapter (EFA), specify efa. For more information, see Elastic Fabric Adapter in the Amazon Elastic Compute Cloud User Guide. Valid values: interface | efa 
+     * The type of network interface. Valid values: interface | efa 
      */
     InterfaceType?: String;
     /**
@@ -20755,11 +20978,11 @@ declare namespace EC2 {
      */
     InstanceGenerations?: InstanceGenerationSet;
     /**
-     * The price protection threshold for Spot Instances. This is the maximum you’ll pay for a Spot Instance, expressed as a percentage above the cheapest M, C, or R instance type with your specified attributes. When Amazon EC2 selects instance types with your attributes, it excludes instance types priced above your threshold. The parameter accepts an integer, which Amazon EC2 interprets as a percentage. To turn off price protection, specify a high value, such as 999999. This parameter is not supported for GetSpotPlacementScores and GetInstanceTypesFromInstanceRequirements. Default: 100 
+     * The price protection threshold for Spot Instances. This is the maximum you’ll pay for a Spot Instance, expressed as a percentage above the cheapest M, C, or R instance type with your specified attributes. When Amazon EC2 selects instance types with your attributes, it excludes instance types priced above your threshold. The parameter accepts an integer, which Amazon EC2 interprets as a percentage. To turn off price protection, specify a high value, such as 999999. This parameter is not supported for GetSpotPlacementScores and GetInstanceTypesFromInstanceRequirements.  If you set TargetCapacityUnitType to vcpu or memory-mib, the price protection threshold is applied based on the per-vCPU or per-memory price instead of the per-instance price.  Default: 100 
      */
     SpotMaxPricePercentageOverLowestPrice?: Integer;
     /**
-     * The price protection threshold for On-Demand Instances. This is the maximum you’ll pay for an On-Demand Instance, expressed as a percentage above the cheapest M, C, or R instance type with your specified attributes. When Amazon EC2 selects instance types with your attributes, it excludes instance types priced above your threshold. The parameter accepts an integer, which Amazon EC2 interprets as a percentage. To turn off price protection, specify a high value, such as 999999. This parameter is not supported for GetSpotPlacementScores and GetInstanceTypesFromInstanceRequirements. Default: 20 
+     * The price protection threshold for On-Demand Instances. This is the maximum you’ll pay for an On-Demand Instance, expressed as a percentage above the cheapest M, C, or R instance type with your specified attributes. When Amazon EC2 selects instance types with your attributes, it excludes instance types priced above your threshold. The parameter accepts an integer, which Amazon EC2 interprets as a percentage. To turn off price protection, specify a high value, such as 999999. This parameter is not supported for GetSpotPlacementScores and GetInstanceTypesFromInstanceRequirements.  If you set TargetCapacityUnitType to vcpu or memory-mib, the price protection threshold is applied based on the per-vCPU or per-memory price instead of the per-instance price.  Default: 20 
      */
     OnDemandMaxPricePercentageOverLowestPrice?: Integer;
     /**
@@ -20841,11 +21064,11 @@ declare namespace EC2 {
      */
     InstanceGenerations?: InstanceGenerationSet;
     /**
-     * The price protection threshold for Spot Instance. This is the maximum you’ll pay for an Spot Instance, expressed as a percentage above the cheapest M, C, or R instance type with your specified attributes. When Amazon EC2 selects instance types with your attributes, it excludes instance types priced above your threshold. The parameter accepts an integer, which Amazon EC2 interprets as a percentage. To turn off price protection, specify a high value, such as 999999. This parameter is not supported for GetSpotPlacementScores and GetInstanceTypesFromInstanceRequirements. Default: 100 
+     * The price protection threshold for Spot Instance. This is the maximum you’ll pay for an Spot Instance, expressed as a percentage above the cheapest M, C, or R instance type with your specified attributes. When Amazon EC2 selects instance types with your attributes, it excludes instance types priced above your threshold. The parameter accepts an integer, which Amazon EC2 interprets as a percentage. To turn off price protection, specify a high value, such as 999999. This parameter is not supported for GetSpotPlacementScores and GetInstanceTypesFromInstanceRequirements.  If you set TargetCapacityUnitType to vcpu or memory-mib, the price protection threshold is applied based on the per-vCPU or per-memory price instead of the per-instance price.  Default: 100 
      */
     SpotMaxPricePercentageOverLowestPrice?: Integer;
     /**
-     * The price protection threshold for On-Demand Instances. This is the maximum you’ll pay for an On-Demand Instance, expressed as a percentage above the cheapest M, C, or R instance type with your specified attributes. When Amazon EC2 selects instance types with your attributes, it excludes instance types priced above your threshold. The parameter accepts an integer, which Amazon EC2 interprets as a percentage. To turn off price protection, specify a high value, such as 999999. This parameter is not supported for GetSpotPlacementScores and GetInstanceTypesFromInstanceRequirements. Default: 20 
+     * The price protection threshold for On-Demand Instances. This is the maximum you’ll pay for an On-Demand Instance, expressed as a percentage above the cheapest M, C, or R instance type with your specified attributes. When Amazon EC2 selects instance types with your attributes, it excludes instance types priced above your threshold. The parameter accepts an integer, which Amazon EC2 interprets as a percentage. To turn off price protection, specify a high value, such as 999999. This parameter is not supported for GetSpotPlacementScores and GetInstanceTypesFromInstanceRequirements.  If you set TargetCapacityUnitType to vcpu or memory-mib, the price protection threshold is applied based on the per-vCPU or per-memory price instead of the per-instance price.  Default: 20 
      */
     OnDemandMaxPricePercentageOverLowestPrice?: Integer;
     /**
@@ -21065,7 +21288,7 @@ declare namespace EC2 {
      */
     IncludeAllTagsOfInstance?: Boolean;
   }
-  export type InstanceType = "a1.medium"|"a1.large"|"a1.xlarge"|"a1.2xlarge"|"a1.4xlarge"|"a1.metal"|"c1.medium"|"c1.xlarge"|"c3.large"|"c3.xlarge"|"c3.2xlarge"|"c3.4xlarge"|"c3.8xlarge"|"c4.large"|"c4.xlarge"|"c4.2xlarge"|"c4.4xlarge"|"c4.8xlarge"|"c5.large"|"c5.xlarge"|"c5.2xlarge"|"c5.4xlarge"|"c5.9xlarge"|"c5.12xlarge"|"c5.18xlarge"|"c5.24xlarge"|"c5.metal"|"c5a.large"|"c5a.xlarge"|"c5a.2xlarge"|"c5a.4xlarge"|"c5a.8xlarge"|"c5a.12xlarge"|"c5a.16xlarge"|"c5a.24xlarge"|"c5ad.large"|"c5ad.xlarge"|"c5ad.2xlarge"|"c5ad.4xlarge"|"c5ad.8xlarge"|"c5ad.12xlarge"|"c5ad.16xlarge"|"c5ad.24xlarge"|"c5d.large"|"c5d.xlarge"|"c5d.2xlarge"|"c5d.4xlarge"|"c5d.9xlarge"|"c5d.12xlarge"|"c5d.18xlarge"|"c5d.24xlarge"|"c5d.metal"|"c5n.large"|"c5n.xlarge"|"c5n.2xlarge"|"c5n.4xlarge"|"c5n.9xlarge"|"c5n.18xlarge"|"c5n.metal"|"c6g.medium"|"c6g.large"|"c6g.xlarge"|"c6g.2xlarge"|"c6g.4xlarge"|"c6g.8xlarge"|"c6g.12xlarge"|"c6g.16xlarge"|"c6g.metal"|"c6gd.medium"|"c6gd.large"|"c6gd.xlarge"|"c6gd.2xlarge"|"c6gd.4xlarge"|"c6gd.8xlarge"|"c6gd.12xlarge"|"c6gd.16xlarge"|"c6gd.metal"|"c6gn.medium"|"c6gn.large"|"c6gn.xlarge"|"c6gn.2xlarge"|"c6gn.4xlarge"|"c6gn.8xlarge"|"c6gn.12xlarge"|"c6gn.16xlarge"|"c6i.large"|"c6i.xlarge"|"c6i.2xlarge"|"c6i.4xlarge"|"c6i.8xlarge"|"c6i.12xlarge"|"c6i.16xlarge"|"c6i.24xlarge"|"c6i.32xlarge"|"cc1.4xlarge"|"cc2.8xlarge"|"cg1.4xlarge"|"cr1.8xlarge"|"d2.xlarge"|"d2.2xlarge"|"d2.4xlarge"|"d2.8xlarge"|"d3.xlarge"|"d3.2xlarge"|"d3.4xlarge"|"d3.8xlarge"|"d3en.xlarge"|"d3en.2xlarge"|"d3en.4xlarge"|"d3en.6xlarge"|"d3en.8xlarge"|"d3en.12xlarge"|"dl1.24xlarge"|"f1.2xlarge"|"f1.4xlarge"|"f1.16xlarge"|"g2.2xlarge"|"g2.8xlarge"|"g3.4xlarge"|"g3.8xlarge"|"g3.16xlarge"|"g3s.xlarge"|"g4ad.xlarge"|"g4ad.2xlarge"|"g4ad.4xlarge"|"g4ad.8xlarge"|"g4ad.16xlarge"|"g4dn.xlarge"|"g4dn.2xlarge"|"g4dn.4xlarge"|"g4dn.8xlarge"|"g4dn.12xlarge"|"g4dn.16xlarge"|"g4dn.metal"|"g5.xlarge"|"g5.2xlarge"|"g5.4xlarge"|"g5.8xlarge"|"g5.12xlarge"|"g5.16xlarge"|"g5.24xlarge"|"g5.48xlarge"|"g5g.xlarge"|"g5g.2xlarge"|"g5g.4xlarge"|"g5g.8xlarge"|"g5g.16xlarge"|"g5g.metal"|"hi1.4xlarge"|"hpc6a.48xlarge"|"hs1.8xlarge"|"h1.2xlarge"|"h1.4xlarge"|"h1.8xlarge"|"h1.16xlarge"|"i2.xlarge"|"i2.2xlarge"|"i2.4xlarge"|"i2.8xlarge"|"i3.large"|"i3.xlarge"|"i3.2xlarge"|"i3.4xlarge"|"i3.8xlarge"|"i3.16xlarge"|"i3.metal"|"i3en.large"|"i3en.xlarge"|"i3en.2xlarge"|"i3en.3xlarge"|"i3en.6xlarge"|"i3en.12xlarge"|"i3en.24xlarge"|"i3en.metal"|"im4gn.large"|"im4gn.xlarge"|"im4gn.2xlarge"|"im4gn.4xlarge"|"im4gn.8xlarge"|"im4gn.16xlarge"|"inf1.xlarge"|"inf1.2xlarge"|"inf1.6xlarge"|"inf1.24xlarge"|"is4gen.medium"|"is4gen.large"|"is4gen.xlarge"|"is4gen.2xlarge"|"is4gen.4xlarge"|"is4gen.8xlarge"|"m1.small"|"m1.medium"|"m1.large"|"m1.xlarge"|"m2.xlarge"|"m2.2xlarge"|"m2.4xlarge"|"m3.medium"|"m3.large"|"m3.xlarge"|"m3.2xlarge"|"m4.large"|"m4.xlarge"|"m4.2xlarge"|"m4.4xlarge"|"m4.10xlarge"|"m4.16xlarge"|"m5.large"|"m5.xlarge"|"m5.2xlarge"|"m5.4xlarge"|"m5.8xlarge"|"m5.12xlarge"|"m5.16xlarge"|"m5.24xlarge"|"m5.metal"|"m5a.large"|"m5a.xlarge"|"m5a.2xlarge"|"m5a.4xlarge"|"m5a.8xlarge"|"m5a.12xlarge"|"m5a.16xlarge"|"m5a.24xlarge"|"m5ad.large"|"m5ad.xlarge"|"m5ad.2xlarge"|"m5ad.4xlarge"|"m5ad.8xlarge"|"m5ad.12xlarge"|"m5ad.16xlarge"|"m5ad.24xlarge"|"m5d.large"|"m5d.xlarge"|"m5d.2xlarge"|"m5d.4xlarge"|"m5d.8xlarge"|"m5d.12xlarge"|"m5d.16xlarge"|"m5d.24xlarge"|"m5d.metal"|"m5dn.large"|"m5dn.xlarge"|"m5dn.2xlarge"|"m5dn.4xlarge"|"m5dn.8xlarge"|"m5dn.12xlarge"|"m5dn.16xlarge"|"m5dn.24xlarge"|"m5dn.metal"|"m5n.large"|"m5n.xlarge"|"m5n.2xlarge"|"m5n.4xlarge"|"m5n.8xlarge"|"m5n.12xlarge"|"m5n.16xlarge"|"m5n.24xlarge"|"m5n.metal"|"m5zn.large"|"m5zn.xlarge"|"m5zn.2xlarge"|"m5zn.3xlarge"|"m5zn.6xlarge"|"m5zn.12xlarge"|"m5zn.metal"|"m6a.large"|"m6a.xlarge"|"m6a.2xlarge"|"m6a.4xlarge"|"m6a.8xlarge"|"m6a.12xlarge"|"m6a.16xlarge"|"m6a.24xlarge"|"m6a.32xlarge"|"m6a.48xlarge"|"m6g.metal"|"m6g.medium"|"m6g.large"|"m6g.xlarge"|"m6g.2xlarge"|"m6g.4xlarge"|"m6g.8xlarge"|"m6g.12xlarge"|"m6g.16xlarge"|"m6gd.metal"|"m6gd.medium"|"m6gd.large"|"m6gd.xlarge"|"m6gd.2xlarge"|"m6gd.4xlarge"|"m6gd.8xlarge"|"m6gd.12xlarge"|"m6gd.16xlarge"|"m6i.large"|"m6i.xlarge"|"m6i.2xlarge"|"m6i.4xlarge"|"m6i.8xlarge"|"m6i.12xlarge"|"m6i.16xlarge"|"m6i.24xlarge"|"m6i.32xlarge"|"mac1.metal"|"p2.xlarge"|"p2.8xlarge"|"p2.16xlarge"|"p3.2xlarge"|"p3.8xlarge"|"p3.16xlarge"|"p3dn.24xlarge"|"p4d.24xlarge"|"r3.large"|"r3.xlarge"|"r3.2xlarge"|"r3.4xlarge"|"r3.8xlarge"|"r4.large"|"r4.xlarge"|"r4.2xlarge"|"r4.4xlarge"|"r4.8xlarge"|"r4.16xlarge"|"r5.large"|"r5.xlarge"|"r5.2xlarge"|"r5.4xlarge"|"r5.8xlarge"|"r5.12xlarge"|"r5.16xlarge"|"r5.24xlarge"|"r5.metal"|"r5a.large"|"r5a.xlarge"|"r5a.2xlarge"|"r5a.4xlarge"|"r5a.8xlarge"|"r5a.12xlarge"|"r5a.16xlarge"|"r5a.24xlarge"|"r5ad.large"|"r5ad.xlarge"|"r5ad.2xlarge"|"r5ad.4xlarge"|"r5ad.8xlarge"|"r5ad.12xlarge"|"r5ad.16xlarge"|"r5ad.24xlarge"|"r5b.large"|"r5b.xlarge"|"r5b.2xlarge"|"r5b.4xlarge"|"r5b.8xlarge"|"r5b.12xlarge"|"r5b.16xlarge"|"r5b.24xlarge"|"r5b.metal"|"r5d.large"|"r5d.xlarge"|"r5d.2xlarge"|"r5d.4xlarge"|"r5d.8xlarge"|"r5d.12xlarge"|"r5d.16xlarge"|"r5d.24xlarge"|"r5d.metal"|"r5dn.large"|"r5dn.xlarge"|"r5dn.2xlarge"|"r5dn.4xlarge"|"r5dn.8xlarge"|"r5dn.12xlarge"|"r5dn.16xlarge"|"r5dn.24xlarge"|"r5dn.metal"|"r5n.large"|"r5n.xlarge"|"r5n.2xlarge"|"r5n.4xlarge"|"r5n.8xlarge"|"r5n.12xlarge"|"r5n.16xlarge"|"r5n.24xlarge"|"r5n.metal"|"r6g.medium"|"r6g.large"|"r6g.xlarge"|"r6g.2xlarge"|"r6g.4xlarge"|"r6g.8xlarge"|"r6g.12xlarge"|"r6g.16xlarge"|"r6g.metal"|"r6gd.medium"|"r6gd.large"|"r6gd.xlarge"|"r6gd.2xlarge"|"r6gd.4xlarge"|"r6gd.8xlarge"|"r6gd.12xlarge"|"r6gd.16xlarge"|"r6gd.metal"|"t1.micro"|"t2.nano"|"t2.micro"|"t2.small"|"t2.medium"|"t2.large"|"t2.xlarge"|"t2.2xlarge"|"t3.nano"|"t3.micro"|"t3.small"|"t3.medium"|"t3.large"|"t3.xlarge"|"t3.2xlarge"|"t3a.nano"|"t3a.micro"|"t3a.small"|"t3a.medium"|"t3a.large"|"t3a.xlarge"|"t3a.2xlarge"|"t4g.nano"|"t4g.micro"|"t4g.small"|"t4g.medium"|"t4g.large"|"t4g.xlarge"|"t4g.2xlarge"|"u-6tb1.56xlarge"|"u-6tb1.112xlarge"|"u-9tb1.112xlarge"|"u-12tb1.112xlarge"|"u-6tb1.metal"|"u-9tb1.metal"|"u-12tb1.metal"|"u-18tb1.metal"|"u-24tb1.metal"|"vt1.3xlarge"|"vt1.6xlarge"|"vt1.24xlarge"|"x1.16xlarge"|"x1.32xlarge"|"x1e.xlarge"|"x1e.2xlarge"|"x1e.4xlarge"|"x1e.8xlarge"|"x1e.16xlarge"|"x1e.32xlarge"|"x2gd.medium"|"x2gd.large"|"x2gd.xlarge"|"x2gd.2xlarge"|"x2gd.4xlarge"|"x2gd.8xlarge"|"x2gd.12xlarge"|"x2gd.16xlarge"|"x2gd.metal"|"z1d.large"|"z1d.xlarge"|"z1d.2xlarge"|"z1d.3xlarge"|"z1d.6xlarge"|"z1d.12xlarge"|"z1d.metal"|string;
+  export type InstanceType = "a1.medium"|"a1.large"|"a1.xlarge"|"a1.2xlarge"|"a1.4xlarge"|"a1.metal"|"c1.medium"|"c1.xlarge"|"c3.large"|"c3.xlarge"|"c3.2xlarge"|"c3.4xlarge"|"c3.8xlarge"|"c4.large"|"c4.xlarge"|"c4.2xlarge"|"c4.4xlarge"|"c4.8xlarge"|"c5.large"|"c5.xlarge"|"c5.2xlarge"|"c5.4xlarge"|"c5.9xlarge"|"c5.12xlarge"|"c5.18xlarge"|"c5.24xlarge"|"c5.metal"|"c5a.large"|"c5a.xlarge"|"c5a.2xlarge"|"c5a.4xlarge"|"c5a.8xlarge"|"c5a.12xlarge"|"c5a.16xlarge"|"c5a.24xlarge"|"c5ad.large"|"c5ad.xlarge"|"c5ad.2xlarge"|"c5ad.4xlarge"|"c5ad.8xlarge"|"c5ad.12xlarge"|"c5ad.16xlarge"|"c5ad.24xlarge"|"c5d.large"|"c5d.xlarge"|"c5d.2xlarge"|"c5d.4xlarge"|"c5d.9xlarge"|"c5d.12xlarge"|"c5d.18xlarge"|"c5d.24xlarge"|"c5d.metal"|"c5n.large"|"c5n.xlarge"|"c5n.2xlarge"|"c5n.4xlarge"|"c5n.9xlarge"|"c5n.18xlarge"|"c5n.metal"|"c6g.medium"|"c6g.large"|"c6g.xlarge"|"c6g.2xlarge"|"c6g.4xlarge"|"c6g.8xlarge"|"c6g.12xlarge"|"c6g.16xlarge"|"c6g.metal"|"c6gd.medium"|"c6gd.large"|"c6gd.xlarge"|"c6gd.2xlarge"|"c6gd.4xlarge"|"c6gd.8xlarge"|"c6gd.12xlarge"|"c6gd.16xlarge"|"c6gd.metal"|"c6gn.medium"|"c6gn.large"|"c6gn.xlarge"|"c6gn.2xlarge"|"c6gn.4xlarge"|"c6gn.8xlarge"|"c6gn.12xlarge"|"c6gn.16xlarge"|"c6i.large"|"c6i.xlarge"|"c6i.2xlarge"|"c6i.4xlarge"|"c6i.8xlarge"|"c6i.12xlarge"|"c6i.16xlarge"|"c6i.24xlarge"|"c6i.32xlarge"|"c6i.metal"|"cc1.4xlarge"|"cc2.8xlarge"|"cg1.4xlarge"|"cr1.8xlarge"|"d2.xlarge"|"d2.2xlarge"|"d2.4xlarge"|"d2.8xlarge"|"d3.xlarge"|"d3.2xlarge"|"d3.4xlarge"|"d3.8xlarge"|"d3en.xlarge"|"d3en.2xlarge"|"d3en.4xlarge"|"d3en.6xlarge"|"d3en.8xlarge"|"d3en.12xlarge"|"dl1.24xlarge"|"f1.2xlarge"|"f1.4xlarge"|"f1.16xlarge"|"g2.2xlarge"|"g2.8xlarge"|"g3.4xlarge"|"g3.8xlarge"|"g3.16xlarge"|"g3s.xlarge"|"g4ad.xlarge"|"g4ad.2xlarge"|"g4ad.4xlarge"|"g4ad.8xlarge"|"g4ad.16xlarge"|"g4dn.xlarge"|"g4dn.2xlarge"|"g4dn.4xlarge"|"g4dn.8xlarge"|"g4dn.12xlarge"|"g4dn.16xlarge"|"g4dn.metal"|"g5.xlarge"|"g5.2xlarge"|"g5.4xlarge"|"g5.8xlarge"|"g5.12xlarge"|"g5.16xlarge"|"g5.24xlarge"|"g5.48xlarge"|"g5g.xlarge"|"g5g.2xlarge"|"g5g.4xlarge"|"g5g.8xlarge"|"g5g.16xlarge"|"g5g.metal"|"hi1.4xlarge"|"hpc6a.48xlarge"|"hs1.8xlarge"|"h1.2xlarge"|"h1.4xlarge"|"h1.8xlarge"|"h1.16xlarge"|"i2.xlarge"|"i2.2xlarge"|"i2.4xlarge"|"i2.8xlarge"|"i3.large"|"i3.xlarge"|"i3.2xlarge"|"i3.4xlarge"|"i3.8xlarge"|"i3.16xlarge"|"i3.metal"|"i3en.large"|"i3en.xlarge"|"i3en.2xlarge"|"i3en.3xlarge"|"i3en.6xlarge"|"i3en.12xlarge"|"i3en.24xlarge"|"i3en.metal"|"im4gn.large"|"im4gn.xlarge"|"im4gn.2xlarge"|"im4gn.4xlarge"|"im4gn.8xlarge"|"im4gn.16xlarge"|"inf1.xlarge"|"inf1.2xlarge"|"inf1.6xlarge"|"inf1.24xlarge"|"is4gen.medium"|"is4gen.large"|"is4gen.xlarge"|"is4gen.2xlarge"|"is4gen.4xlarge"|"is4gen.8xlarge"|"m1.small"|"m1.medium"|"m1.large"|"m1.xlarge"|"m2.xlarge"|"m2.2xlarge"|"m2.4xlarge"|"m3.medium"|"m3.large"|"m3.xlarge"|"m3.2xlarge"|"m4.large"|"m4.xlarge"|"m4.2xlarge"|"m4.4xlarge"|"m4.10xlarge"|"m4.16xlarge"|"m5.large"|"m5.xlarge"|"m5.2xlarge"|"m5.4xlarge"|"m5.8xlarge"|"m5.12xlarge"|"m5.16xlarge"|"m5.24xlarge"|"m5.metal"|"m5a.large"|"m5a.xlarge"|"m5a.2xlarge"|"m5a.4xlarge"|"m5a.8xlarge"|"m5a.12xlarge"|"m5a.16xlarge"|"m5a.24xlarge"|"m5ad.large"|"m5ad.xlarge"|"m5ad.2xlarge"|"m5ad.4xlarge"|"m5ad.8xlarge"|"m5ad.12xlarge"|"m5ad.16xlarge"|"m5ad.24xlarge"|"m5d.large"|"m5d.xlarge"|"m5d.2xlarge"|"m5d.4xlarge"|"m5d.8xlarge"|"m5d.12xlarge"|"m5d.16xlarge"|"m5d.24xlarge"|"m5d.metal"|"m5dn.large"|"m5dn.xlarge"|"m5dn.2xlarge"|"m5dn.4xlarge"|"m5dn.8xlarge"|"m5dn.12xlarge"|"m5dn.16xlarge"|"m5dn.24xlarge"|"m5dn.metal"|"m5n.large"|"m5n.xlarge"|"m5n.2xlarge"|"m5n.4xlarge"|"m5n.8xlarge"|"m5n.12xlarge"|"m5n.16xlarge"|"m5n.24xlarge"|"m5n.metal"|"m5zn.large"|"m5zn.xlarge"|"m5zn.2xlarge"|"m5zn.3xlarge"|"m5zn.6xlarge"|"m5zn.12xlarge"|"m5zn.metal"|"m6a.large"|"m6a.xlarge"|"m6a.2xlarge"|"m6a.4xlarge"|"m6a.8xlarge"|"m6a.12xlarge"|"m6a.16xlarge"|"m6a.24xlarge"|"m6a.32xlarge"|"m6a.48xlarge"|"m6g.metal"|"m6g.medium"|"m6g.large"|"m6g.xlarge"|"m6g.2xlarge"|"m6g.4xlarge"|"m6g.8xlarge"|"m6g.12xlarge"|"m6g.16xlarge"|"m6gd.metal"|"m6gd.medium"|"m6gd.large"|"m6gd.xlarge"|"m6gd.2xlarge"|"m6gd.4xlarge"|"m6gd.8xlarge"|"m6gd.12xlarge"|"m6gd.16xlarge"|"m6i.large"|"m6i.xlarge"|"m6i.2xlarge"|"m6i.4xlarge"|"m6i.8xlarge"|"m6i.12xlarge"|"m6i.16xlarge"|"m6i.24xlarge"|"m6i.32xlarge"|"m6i.metal"|"mac1.metal"|"p2.xlarge"|"p2.8xlarge"|"p2.16xlarge"|"p3.2xlarge"|"p3.8xlarge"|"p3.16xlarge"|"p3dn.24xlarge"|"p4d.24xlarge"|"r3.large"|"r3.xlarge"|"r3.2xlarge"|"r3.4xlarge"|"r3.8xlarge"|"r4.large"|"r4.xlarge"|"r4.2xlarge"|"r4.4xlarge"|"r4.8xlarge"|"r4.16xlarge"|"r5.large"|"r5.xlarge"|"r5.2xlarge"|"r5.4xlarge"|"r5.8xlarge"|"r5.12xlarge"|"r5.16xlarge"|"r5.24xlarge"|"r5.metal"|"r5a.large"|"r5a.xlarge"|"r5a.2xlarge"|"r5a.4xlarge"|"r5a.8xlarge"|"r5a.12xlarge"|"r5a.16xlarge"|"r5a.24xlarge"|"r5ad.large"|"r5ad.xlarge"|"r5ad.2xlarge"|"r5ad.4xlarge"|"r5ad.8xlarge"|"r5ad.12xlarge"|"r5ad.16xlarge"|"r5ad.24xlarge"|"r5b.large"|"r5b.xlarge"|"r5b.2xlarge"|"r5b.4xlarge"|"r5b.8xlarge"|"r5b.12xlarge"|"r5b.16xlarge"|"r5b.24xlarge"|"r5b.metal"|"r5d.large"|"r5d.xlarge"|"r5d.2xlarge"|"r5d.4xlarge"|"r5d.8xlarge"|"r5d.12xlarge"|"r5d.16xlarge"|"r5d.24xlarge"|"r5d.metal"|"r5dn.large"|"r5dn.xlarge"|"r5dn.2xlarge"|"r5dn.4xlarge"|"r5dn.8xlarge"|"r5dn.12xlarge"|"r5dn.16xlarge"|"r5dn.24xlarge"|"r5dn.metal"|"r5n.large"|"r5n.xlarge"|"r5n.2xlarge"|"r5n.4xlarge"|"r5n.8xlarge"|"r5n.12xlarge"|"r5n.16xlarge"|"r5n.24xlarge"|"r5n.metal"|"r6g.medium"|"r6g.large"|"r6g.xlarge"|"r6g.2xlarge"|"r6g.4xlarge"|"r6g.8xlarge"|"r6g.12xlarge"|"r6g.16xlarge"|"r6g.metal"|"r6gd.medium"|"r6gd.large"|"r6gd.xlarge"|"r6gd.2xlarge"|"r6gd.4xlarge"|"r6gd.8xlarge"|"r6gd.12xlarge"|"r6gd.16xlarge"|"r6gd.metal"|"r6i.large"|"r6i.xlarge"|"r6i.2xlarge"|"r6i.4xlarge"|"r6i.8xlarge"|"r6i.12xlarge"|"r6i.16xlarge"|"r6i.24xlarge"|"r6i.32xlarge"|"r6i.metal"|"t1.micro"|"t2.nano"|"t2.micro"|"t2.small"|"t2.medium"|"t2.large"|"t2.xlarge"|"t2.2xlarge"|"t3.nano"|"t3.micro"|"t3.small"|"t3.medium"|"t3.large"|"t3.xlarge"|"t3.2xlarge"|"t3a.nano"|"t3a.micro"|"t3a.small"|"t3a.medium"|"t3a.large"|"t3a.xlarge"|"t3a.2xlarge"|"t4g.nano"|"t4g.micro"|"t4g.small"|"t4g.medium"|"t4g.large"|"t4g.xlarge"|"t4g.2xlarge"|"u-6tb1.56xlarge"|"u-6tb1.112xlarge"|"u-9tb1.112xlarge"|"u-12tb1.112xlarge"|"u-6tb1.metal"|"u-9tb1.metal"|"u-12tb1.metal"|"u-18tb1.metal"|"u-24tb1.metal"|"vt1.3xlarge"|"vt1.6xlarge"|"vt1.24xlarge"|"x1.16xlarge"|"x1.32xlarge"|"x1e.xlarge"|"x1e.2xlarge"|"x1e.4xlarge"|"x1e.8xlarge"|"x1e.16xlarge"|"x1e.32xlarge"|"x2iezn.2xlarge"|"x2iezn.4xlarge"|"x2iezn.6xlarge"|"x2iezn.8xlarge"|"x2iezn.12xlarge"|"x2iezn.metal"|"x2gd.medium"|"x2gd.large"|"x2gd.xlarge"|"x2gd.2xlarge"|"x2gd.4xlarge"|"x2gd.8xlarge"|"x2gd.12xlarge"|"x2gd.16xlarge"|"x2gd.metal"|"z1d.large"|"z1d.xlarge"|"z1d.2xlarge"|"z1d.3xlarge"|"z1d.6xlarge"|"z1d.12xlarge"|"z1d.metal"|"x2idn.16xlarge"|"x2idn.24xlarge"|"x2idn.32xlarge"|"x2iedn.xlarge"|"x2iedn.2xlarge"|"x2iedn.4xlarge"|"x2iedn.8xlarge"|"x2iedn.16xlarge"|"x2iedn.24xlarge"|"x2iedn.32xlarge"|"c6a.large"|"c6a.xlarge"|"c6a.2xlarge"|"c6a.4xlarge"|"c6a.8xlarge"|"c6a.12xlarge"|"c6a.16xlarge"|"c6a.24xlarge"|"c6a.32xlarge"|"c6a.48xlarge"|"c6a.metal"|"m6a.metal"|"i4i.large"|"i4i.xlarge"|"i4i.2xlarge"|"i4i.4xlarge"|"i4i.8xlarge"|"i4i.16xlarge"|"i4i.32xlarge"|string;
   export type InstanceTypeHypervisor = "nitro"|"xen"|string;
   export interface InstanceTypeInfo {
     /**
@@ -21245,6 +21468,7 @@ declare namespace EC2 {
   export type InternetGatewayList = InternetGateway[];
   export type IpAddress = string;
   export type IpAddressList = IpAddress[];
+  export type IpAddressType = "ipv4"|"dualstack"|"ipv6"|string;
   export interface IpPermission {
     /**
      * The start of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number. A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
@@ -21561,7 +21785,7 @@ declare namespace EC2 {
   export type IpamPoolCidrState = "pending-provision"|"provisioned"|"failed-provision"|"pending-deprovision"|"deprovisioned"|"failed-deprovision"|"pending-import"|"failed-import"|string;
   export type IpamPoolId = string;
   export type IpamPoolSet = IpamPool[];
-  export type IpamPoolState = "create-in-progress"|"create-complete"|"create-failed"|"modify-in-progress"|"modify-complete"|"modify-failed"|"delete-in-progress"|"delete-complete"|"delete-failed"|string;
+  export type IpamPoolState = "create-in-progress"|"create-complete"|"create-failed"|"modify-in-progress"|"modify-complete"|"modify-failed"|"delete-in-progress"|"delete-complete"|"delete-failed"|"isolate-in-progress"|"isolate-complete"|"restore-in-progress"|string;
   export interface IpamResourceCidr {
     /**
      * The IPAM ID for an IPAM resource.
@@ -21685,10 +21909,11 @@ declare namespace EC2 {
   }
   export type IpamScopeId = string;
   export type IpamScopeSet = IpamScope[];
-  export type IpamScopeState = "create-in-progress"|"create-complete"|"create-failed"|"modify-in-progress"|"modify-complete"|"modify-failed"|"delete-in-progress"|"delete-complete"|"delete-failed"|string;
+  export type IpamScopeState = "create-in-progress"|"create-complete"|"create-failed"|"modify-in-progress"|"modify-complete"|"modify-failed"|"delete-in-progress"|"delete-complete"|"delete-failed"|"isolate-in-progress"|"isolate-complete"|"restore-in-progress"|string;
   export type IpamScopeType = "public"|"private"|string;
   export type IpamSet = Ipam[];
-  export type IpamState = "create-in-progress"|"create-complete"|"create-failed"|"modify-in-progress"|"modify-complete"|"modify-failed"|"delete-in-progress"|"delete-complete"|"delete-failed"|string;
+  export type IpamState = "create-in-progress"|"create-complete"|"create-failed"|"modify-in-progress"|"modify-complete"|"modify-failed"|"delete-in-progress"|"delete-complete"|"delete-failed"|"isolate-in-progress"|"isolate-complete"|"restore-in-progress"|string;
+  export type Ipv4PoolCoipId = string;
   export type Ipv4PoolEc2Id = string;
   export type Ipv4PrefixList = Ipv4PrefixSpecificationRequest[];
   export type Ipv4PrefixListResponse = Ipv4PrefixSpecificationResponse[];
@@ -21788,10 +22013,11 @@ declare namespace EC2 {
   export type Ipv6RangeList = Ipv6Range[];
   export type Ipv6SupportValue = "enable"|"disable"|string;
   export type KernelId = string;
+  export type KeyFormat = "pem"|"ppk"|string;
   export type KeyNameStringList = KeyPairName[];
   export interface KeyPair {
     /**
-     * The SHA-1 digest of the DER encoded private key.
+     *   For RSA key pairs, the key fingerprint is the SHA-1 digest of the DER encoded private key.   For ED25519 key pairs, the key fingerprint is the base64-encoded SHA-256 digest, which is the default for OpenSSH, starting with OpenSSH 6.8.  
      */
     KeyFingerprint?: String;
     /**
@@ -21819,7 +22045,7 @@ declare namespace EC2 {
      */
     KeyPairId?: String;
     /**
-     * If you used CreateKeyPair to create the key pair:   For RSA key pairs, the key fingerprint is the SHA-1 digest of the DER encoded private key.    For ED25519 key pairs, the key fingerprint is the base64-encoded SHA-256 digest, which is the default for OpenSSH, starting with OpenSSH 6.8.   If you used ImportKeyPair to provide Amazon Web Services the public key:   For RSA key pairs, the key fingerprint is the MD5 public key fingerprint as specified in section 4 of RFC4716.   For ED25519 key pairs, the key fingerprint is the base64-encoded SHA-256 digest, which is the default for OpenSSH, starting with OpenSSH 6.8.  
+     * If you used CreateKeyPair to create the key pair:   For RSA key pairs, the key fingerprint is the SHA-1 digest of the DER encoded private key.   For ED25519 key pairs, the key fingerprint is the base64-encoded SHA-256 digest, which is the default for OpenSSH, starting with OpenSSH 6.8.   If you used ImportKeyPair to provide Amazon Web Services the public key:   For RSA key pairs, the key fingerprint is the MD5 public key fingerprint as specified in section 4 of RFC4716.   For ED25519 key pairs, the key fingerprint is the base64-encoded SHA-256 digest, which is the default for OpenSSH, starting with OpenSSH 6.8.  
      */
     KeyFingerprint?: String;
     /**
@@ -21834,6 +22060,14 @@ declare namespace EC2 {
      * Any tags applied to the key pair.
      */
     Tags?: TagList;
+    /**
+     * The public key material.
+     */
+    PublicKey?: String;
+    /**
+     * If you used Amazon EC2 to create the key pair, this is the date and time when the key was created, in ISO 8601 date-time format, in the UTC time zone. If you imported an existing key pair to Amazon EC2, this is the date and time the key was imported, in ISO 8601 date-time format, in the UTC time zone.
+     */
+    CreateTime?: MillisecondDateTime;
   }
   export type KeyPairList = KeyPairInfo[];
   export type KeyPairName = string;
@@ -21908,7 +22142,7 @@ declare namespace EC2 {
      */
     ImageId?: String;
     /**
-     * The instance type.
+     * The instance type. Only one instance type can be specified.
      */
     InstanceType?: InstanceType;
     /**
@@ -21978,6 +22212,7 @@ declare namespace EC2 {
      */
     Overrides?: FleetLaunchTemplateOverrides;
   }
+  export type LaunchTemplateAutoRecoveryState = "default"|"disabled"|string;
   export interface LaunchTemplateBlockDeviceMapping {
     /**
      * The device name.
@@ -22206,6 +22441,18 @@ declare namespace EC2 {
   }
   export type LaunchTemplateId = string;
   export type LaunchTemplateIdStringList = LaunchTemplateId[];
+  export interface LaunchTemplateInstanceMaintenanceOptions {
+    /**
+     * Disables the automatic recovery behavior of your instance or sets it to default.
+     */
+    AutoRecovery?: LaunchTemplateAutoRecoveryState;
+  }
+  export interface LaunchTemplateInstanceMaintenanceOptionsRequest {
+    /**
+     * Disables the automatic recovery behavior of your instance or sets it to default. For more information, see Simplified automatic recovery.
+     */
+    AutoRecovery?: LaunchTemplateAutoRecoveryState;
+  }
   export interface LaunchTemplateInstanceMarketOptions {
     /**
      * The market type.
@@ -22249,7 +22496,7 @@ declare namespace EC2 {
      */
     HttpProtocolIpv6?: LaunchTemplateInstanceMetadataProtocolIpv6;
     /**
-     *  
+     * Set to enabled to allow access to instance tags from the instance metadata. Set to disabled to turn off access to instance tags from the instance metadata. For more information, see Work with instance tags using the instance metadata. Default: disabled 
      */
     InstanceMetadataTags?: LaunchTemplateInstanceMetadataTagsState;
   }
@@ -22651,7 +22898,7 @@ declare namespace EC2 {
   export type LaunchTemplateTagSpecificationList = LaunchTemplateTagSpecification[];
   export interface LaunchTemplateTagSpecificationRequest {
     /**
-     * The type of resource to tag. Currently, the resource types that support tagging on creation are instance and volume. To tag a resource after it has been created, see CreateTags.
+     * The type of resource to tag. Currently, the resource types that support tagging on creation are instance, volume, elastic-gpu, network-interface, and spot-instances-request. To tag a resource after it has been created, see CreateTags.
      */
     ResourceType?: ResourceType;
     /**
@@ -22721,6 +22968,35 @@ declare namespace EC2 {
   }
   export type LicenseList = LicenseConfiguration[];
   export type LicenseSpecificationListRequest = LicenseConfigurationRequest[];
+  export type ListImagesInRecycleBinMaxResults = number;
+  export interface ListImagesInRecycleBinRequest {
+    /**
+     * The IDs of the AMIs to list. Omit this parameter to list all of the AMIs that are in the Recycle Bin. You can specify up to 20 IDs in a single request.
+     */
+    ImageIds?: ImageIdStringList;
+    /**
+     * The token for the next page of results.
+     */
+    NextToken?: String;
+    /**
+     * The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value. If you do not specify a value for MaxResults, the request returns 1,000 items per page by default. For more information, see  Pagination.
+     */
+    MaxResults?: ListImagesInRecycleBinMaxResults;
+    /**
+     * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
+     */
+    DryRun?: Boolean;
+  }
+  export interface ListImagesInRecycleBinResult {
+    /**
+     * Information about the AMIs.
+     */
+    Images?: ImageRecycleBinInfoList;
+    /**
+     * The token to use to retrieve the next page of results. This value is null when there are no more results to return.
+     */
+    NextToken?: String;
+  }
   export type ListSnapshotsInRecycleBinMaxResults = number;
   export interface ListSnapshotsInRecycleBinRequest {
     /**
@@ -23289,7 +23565,13 @@ declare namespace EC2 {
      * The options for managing connection authorization for new client connections.
      */
     ClientConnectOptions?: ClientConnectOptions;
+    /**
+     * The maximum VPN session duration time in hours. Valid values: 8 | 10 | 12 | 24  Default value: 24 
+     */
     SessionTimeoutHours?: Integer;
+    /**
+     * Options for enabling a customizable text banner that will be displayed on Amazon Web Services provided clients when a VPN session is established.
+     */
     ClientLoginBannerOptions?: ClientLoginBannerOptions;
   }
   export interface ModifyClientVpnEndpointResult {
@@ -23362,7 +23644,7 @@ declare namespace EC2 {
   }
   export interface ModifyFleetResult {
     /**
-     * Is true if the request succeeds, and an error otherwise.
+     * If the request succeeds, the response returns true. If the request fails, no response is returned, and instead an error message is returned.
      */
     Return?: Boolean;
   }
@@ -23679,6 +23961,30 @@ declare namespace EC2 {
      */
     InstanceEventWindow?: InstanceEventWindow;
   }
+  export interface ModifyInstanceMaintenanceOptionsRequest {
+    /**
+     * The ID of the instance.
+     */
+    InstanceId: InstanceId;
+    /**
+     * Disables the automatic recovery behavior of your instance or sets it to default.
+     */
+    AutoRecovery?: InstanceAutoRecoveryState;
+    /**
+     * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
+     */
+    DryRun?: Boolean;
+  }
+  export interface ModifyInstanceMaintenanceOptionsResult {
+    /**
+     * The ID of the instance.
+     */
+    InstanceId?: String;
+    /**
+     * Provides information on the current automatic recovery behavior of your instance.
+     */
+    AutoRecovery?: InstanceAutoRecoveryState;
+  }
   export interface ModifyInstanceMetadataOptionsRequest {
     /**
      * The ID of the instance.
@@ -24124,7 +24430,7 @@ declare namespace EC2 {
   }
   export interface ModifySpotFleetRequestResponse {
     /**
-     * Is true if the request succeeds, and an error otherwise.
+     * If the request succeeds, the response returns true. If the request fails, no response is returned, and instead an error message is returned.
      */
     Return?: Boolean;
   }
@@ -24154,7 +24460,7 @@ declare namespace EC2 {
      */
     EnableDns64?: AttributeBooleanValue;
     /**
-     * The type of hostnames to assign to instances in the subnet at launch. For IPv4 only subnets, an instance DNS name must be based on the instance IPv4 address. For IPv6 only subnets, an instance DNS name must be based on the instance ID. For dual-stack subnets, you can specify whether DNS names use the instance IPv4 address or the instance ID.
+     * The type of hostname to assign to instances in the subnet at launch. For IPv4-only and dual-stack (IPv4 and IPv6) subnets, an instance DNS name can be based on the instance IPv4 address (ip-name) or the instance ID (resource-name). For IPv6 only subnets, an instance DNS name must be based on the instance ID (resource-name).
      */
     PrivateDnsHostnameTypeOnLaunch?: HostnameType;
     /**
@@ -24556,6 +24862,14 @@ declare namespace EC2 {
      * (Interface endpoint) One or more security group IDs to disassociate from the network interface.
      */
     RemoveSecurityGroupIds?: VpcEndpointSecurityGroupIdList;
+    /**
+     * The IP address type for the endpoint.
+     */
+    IpAddressType?: IpAddressType;
+    /**
+     * The DNS options for the endpoint.
+     */
+    DnsOptions?: DnsOptionsSpecification;
     /**
      * (Interface endpoint) Indicates whether a private hosted zone is associated with the VPC.
      */
@@ -24604,6 +24918,14 @@ declare namespace EC2 {
      * The Amazon Resource Names (ARNs) of Gateway Load Balancers to remove from your service configuration.
      */
     RemoveGatewayLoadBalancerArns?: ValueStringList;
+    /**
+     * The IP address types to add to your service configuration.
+     */
+    AddSupportedIpAddressTypes?: ValueStringList;
+    /**
+     * The IP address types to remove from your service configuration.
+     */
+    RemoveSupportedIpAddressTypes?: ValueStringList;
   }
   export interface ModifyVpcEndpointServiceConfigurationResult {
     /**
@@ -25639,7 +25961,7 @@ declare namespace EC2 {
   }
   export type NetworkInterfacePrivateIpAddressList = NetworkInterfacePrivateIpAddress[];
   export type NetworkInterfaceStatus = "available"|"associated"|"attaching"|"in-use"|"detaching"|string;
-  export type NetworkInterfaceType = "interface"|"natGateway"|"efa"|"trunk"|string;
+  export type NetworkInterfaceType = "interface"|"natGateway"|"efa"|"trunk"|"load_balancer"|"network_load_balancer"|"vpc_endpoint"|"branch"|"transit_gateway"|"lambda"|"quicksight"|"global_accelerator_managed"|"api_gateway_managed"|"gateway_load_balancer"|"gateway_load_balancer_endpoint"|"iot_rules_managed"|"aws_codestar_connections_managed"|string;
   export type NetworkPerformance = string;
   export interface NewDhcpConfiguration {
     Key?: String;
@@ -25820,6 +26142,15 @@ declare namespace EC2 {
      * The component VPC.
      */
     Vpc?: AnalysisComponent;
+    /**
+     * The additional details.
+     */
+    AdditionalDetails?: AdditionalDetailList;
+    TransitGateway?: AnalysisComponent;
+    /**
+     * The route in a transit gateway route table.
+     */
+    TransitGatewayRouteTableRoute?: TransitGatewayRouteTableRoute;
   }
   export type PathComponentList = PathComponent[];
   export interface PathStatement {
@@ -26769,6 +27100,14 @@ declare namespace EC2 {
      * The boot mode of the AMI. For more information, see Boot modes in the Amazon Elastic Compute Cloud User Guide.
      */
     BootMode?: BootModeValues;
+    /**
+     * Set to v2.0 to enable Trusted Platform Module (TPM) support. For more information, see NitroTPM in the Amazon Elastic Compute Cloud User Guide.
+     */
+    TpmSupport?: TpmSupportValues;
+    /**
+     * Base64 representation of the non-volatile UEFI variable store. To retrieve the UEFI data, use the GetInstanceUefiData command. You can inspect and modify the UEFI data by using the python-uefivars tool on GitHub. For more information, see UEFI Secure Boot in the Amazon Elastic Compute Cloud User Guide.
+     */
+    UefiData?: StringType;
   }
   export interface RegisterImageResult {
     /**
@@ -26989,7 +27328,7 @@ declare namespace EC2 {
     /**
      * The ID of the allocation.
      */
-    IpamPoolAllocationId?: IpamPoolAllocationId;
+    IpamPoolAllocationId: IpamPoolAllocationId;
   }
   export interface ReleaseIpamPoolAllocationResult {
     /**
@@ -27405,6 +27744,10 @@ declare namespace EC2 {
      * The options for the instance hostname. The default values are inherited from the subnet.
      */
     PrivateDnsNameOptions?: LaunchTemplatePrivateDnsNameOptionsRequest;
+    /**
+     * The maintenance options for the instance.
+     */
+    MaintenanceOptions?: LaunchTemplateInstanceMaintenanceOptionsRequest;
   }
   export interface RequestSpotFleetRequest {
     /**
@@ -27512,7 +27855,7 @@ declare namespace EC2 {
      */
     ImageId?: ImageId;
     /**
-     * The instance type.
+     * The instance type. Only one instance type can be specified.
      */
     InstanceType?: InstanceType;
     /**
@@ -27980,7 +28323,7 @@ declare namespace EC2 {
   }
   export interface ResetInstanceAttributeRequest {
     /**
-     * The attribute to reset.  You can only reset the following attributes: kernel | ramdisk | sourceDestCheck. To change an instance attribute, use ModifyInstanceAttribute. 
+     * The attribute to reset.  You can only reset the following attributes: kernel | ramdisk | sourceDestCheck. 
      */
     Attribute: InstanceAttributeName;
     /**
@@ -28043,7 +28386,7 @@ declare namespace EC2 {
      */
     ResourceTypes?: ValueStringList;
   }
-  export type ResourceType = "capacity-reservation"|"client-vpn-endpoint"|"customer-gateway"|"carrier-gateway"|"dedicated-host"|"dhcp-options"|"egress-only-internet-gateway"|"elastic-ip"|"elastic-gpu"|"export-image-task"|"export-instance-task"|"fleet"|"fpga-image"|"host-reservation"|"image"|"import-image-task"|"import-snapshot-task"|"instance"|"instance-event-window"|"internet-gateway"|"ipam"|"ipam-pool"|"ipam-scope"|"ipv4pool-ec2"|"ipv6pool-ec2"|"key-pair"|"launch-template"|"local-gateway"|"local-gateway-route-table"|"local-gateway-virtual-interface"|"local-gateway-virtual-interface-group"|"local-gateway-route-table-vpc-association"|"local-gateway-route-table-virtual-interface-group-association"|"natgateway"|"network-acl"|"network-interface"|"network-insights-analysis"|"network-insights-path"|"network-insights-access-scope"|"network-insights-access-scope-analysis"|"placement-group"|"prefix-list"|"replace-root-volume-task"|"reserved-instances"|"route-table"|"security-group"|"security-group-rule"|"snapshot"|"spot-fleet-request"|"spot-instances-request"|"subnet"|"traffic-mirror-filter"|"traffic-mirror-session"|"traffic-mirror-target"|"transit-gateway"|"transit-gateway-attachment"|"transit-gateway-connect-peer"|"transit-gateway-multicast-domain"|"transit-gateway-route-table"|"volume"|"vpc"|"vpc-endpoint"|"vpc-endpoint-service"|"vpc-peering-connection"|"vpn-connection"|"vpn-gateway"|"vpc-flow-log"|string;
+  export type ResourceType = "capacity-reservation"|"client-vpn-endpoint"|"customer-gateway"|"carrier-gateway"|"dedicated-host"|"dhcp-options"|"egress-only-internet-gateway"|"elastic-ip"|"elastic-gpu"|"export-image-task"|"export-instance-task"|"fleet"|"fpga-image"|"host-reservation"|"image"|"import-image-task"|"import-snapshot-task"|"instance"|"instance-event-window"|"internet-gateway"|"ipam"|"ipam-pool"|"ipam-scope"|"ipv4pool-ec2"|"ipv6pool-ec2"|"key-pair"|"launch-template"|"local-gateway"|"local-gateway-route-table"|"local-gateway-virtual-interface"|"local-gateway-virtual-interface-group"|"local-gateway-route-table-vpc-association"|"local-gateway-route-table-virtual-interface-group-association"|"natgateway"|"network-acl"|"network-interface"|"network-insights-analysis"|"network-insights-path"|"network-insights-access-scope"|"network-insights-access-scope-analysis"|"placement-group"|"prefix-list"|"replace-root-volume-task"|"reserved-instances"|"route-table"|"security-group"|"security-group-rule"|"snapshot"|"spot-fleet-request"|"spot-instances-request"|"subnet"|"subnet-cidr-reservation"|"traffic-mirror-filter"|"traffic-mirror-session"|"traffic-mirror-target"|"transit-gateway"|"transit-gateway-attachment"|"transit-gateway-connect-peer"|"transit-gateway-multicast-domain"|"transit-gateway-route-table"|"volume"|"vpc"|"vpc-endpoint"|"vpc-endpoint-service"|"vpc-peering-connection"|"vpn-connection"|"vpn-gateway"|"vpc-flow-log"|string;
   export interface ResponseError {
     /**
      * The error code.
@@ -28173,6 +28516,10 @@ declare namespace EC2 {
      * The options for the instance hostname.
      */
     PrivateDnsNameOptions?: LaunchTemplatePrivateDnsNameOptions;
+    /**
+     * The maintenance options for your instance.
+     */
+    MaintenanceOptions?: LaunchTemplateInstanceMaintenanceOptions;
   }
   export type RestorableByStringList = String[];
   export interface RestoreAddressToClassicRequest {
@@ -28195,6 +28542,22 @@ declare namespace EC2 {
      */
     Status?: Status;
   }
+  export interface RestoreImageFromRecycleBinRequest {
+    /**
+     * The ID of the AMI to restore.
+     */
+    ImageId: ImageId;
+    /**
+     * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
+     */
+    DryRun?: Boolean;
+  }
+  export interface RestoreImageFromRecycleBinResult {
+    /**
+     * Returns true if the request succeeds; otherwise, it returns an error.
+     */
+    Return?: Boolean;
+  }
   export interface RestoreManagedPrefixListVersionRequest {
     /**
      * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
@@ -28658,9 +29021,9 @@ declare namespace EC2 {
      */
     SubnetId?: SubnetId;
     /**
-     * The user data to make available to the instance. For more information, see Run commands on your Linux instance at launch and Run commands on your Windows instance at launch. If you are using a command line tool, base64-encoding is performed for you, and you can load the text from a file. Otherwise, you must provide base64-encoded text. User data is limited to 16 KB.
+     * The user data script to make available to the instance. For more information, see Run commands on your Linux instance at launch and Run commands on your Windows instance at launch. If you are using a command line tool, base64-encoding is performed for you, and you can load the text from a file. Otherwise, you must provide base64-encoded text. User data is limited to 16 KB.
      */
-    UserData?: String;
+    UserData?: RunInstancesUserData;
     /**
      * Reserved.
      */
@@ -28749,7 +29112,12 @@ declare namespace EC2 {
      * The options for the instance hostname. The default values are inherited from the subnet.
      */
     PrivateDnsNameOptions?: PrivateDnsNameOptionsRequest;
+    /**
+     * The maintenance and recovery options for the instance.
+     */
+    MaintenanceOptions?: InstanceMaintenanceOptionsRequest;
   }
+  export type RunInstancesUserData = string;
   export interface RunScheduledInstancesRequest {
     /**
      * Unique, case-sensitive identifier that ensures the idempotency of the request. For more information, see Ensuring Idempotency.
@@ -29179,7 +29547,7 @@ declare namespace EC2 {
      */
     LocalGatewayRouteTableId: LocalGatewayRoutetableId;
     /**
-     * One or more filters.
+     * One or more filters.    route-search.exact-match - The exact match of the specified filter.    route-search.longest-prefix-match - The longest prefix that matches the route.    route-search.subnet-of-match - The routes with a subnet that match the specified CIDR filter.    route-search.supernet-of-match - The routes with a CIDR that encompass the CIDR filter. For example, if you have 10.0.1.0/29 and 10.0.1.0/31 routes in your route table and you specify supernet-of-match as 10.0.1.0/30, then the result returns 10.0.1.0/29.    state - The state of the route.    type - The route type.  
      */
     Filters?: FilterList;
     /**
@@ -29491,6 +29859,10 @@ declare namespace EC2 {
      * The Amazon Resource Names (ARNs) of the Gateway Load Balancers for the service.
      */
     GatewayLoadBalancerArns?: ValueStringList;
+    /**
+     * The supported IP address types.
+     */
+    SupportedIpAddressTypes?: SupportedIpAddressTypes;
     /**
      * The DNS names for the service.
      */
@@ -29513,6 +29885,7 @@ declare namespace EC2 {
     Tags?: TagList;
   }
   export type ServiceConfigurationSet = ServiceConfiguration[];
+  export type ServiceConnectivityType = "ipv4"|"ipv6"|string;
   export interface ServiceDetail {
     /**
      * The Amazon Resource Name (ARN) of the service.
@@ -29570,6 +29943,10 @@ declare namespace EC2 {
      * The verification state of the VPC endpoint service. Consumers of the endpoint service cannot use the private name when the state is not verified.
      */
     PrivateDnsNameVerificationState?: DnsNameState;
+    /**
+     * The supported IP address types.
+     */
+    SupportedIpAddressTypes?: SupportedIpAddressTypes;
   }
   export type ServiceDetailSet = ServiceDetail[];
   export type ServiceState = "Pending"|"Available"|"Deleting"|"Deleted"|"Failed"|string;
@@ -30218,7 +30595,7 @@ declare namespace EC2 {
      */
     SpotPrice?: String;
     /**
-     * The state of the Spot Instance request. Spot status information helps track your Spot Instance requests. For more information, see Spot status in the Amazon EC2 User Guide for Linux Instances.
+     * The state of the Spot Instance request. Spot request status information helps track your Spot Instance requests. For more information, see Spot request status in the Amazon EC2 User Guide for Linux Instances.
      */
     State?: SpotInstanceState;
     /**
@@ -30262,7 +30639,7 @@ declare namespace EC2 {
   }
   export interface SpotInstanceStatus {
     /**
-     * The status code. For a list of status codes, see Spot status codes in the Amazon EC2 User Guide for Linux Instances.
+     * The status code. For a list of status codes, see Spot request status codes in the Amazon EC2 User Guide for Linux Instances.
      */
     Code?: String;
     /**
@@ -30656,6 +31033,7 @@ declare namespace EC2 {
   export type StoreImageTaskResultSet = StoreImageTaskResult[];
   export type String = string;
   export type StringList = String[];
+  export type StringType = string;
   export interface Subnet {
     /**
      * The Availability Zone of the subnet.
@@ -30832,13 +31210,14 @@ declare namespace EC2 {
   }
   export type SuccessfulQueuedPurchaseDeletionSet = SuccessfulQueuedPurchaseDeletion[];
   export type SummaryStatus = "ok"|"impaired"|"insufficient-data"|"not-applicable"|"initializing"|string;
+  export type SupportedIpAddressTypes = ServiceConnectivityType[];
   export interface Tag {
     /**
      * The key of the tag. Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws:.
      */
     Key?: String;
     /**
-     * The value of the tag. Constraints: Tag values are case-sensitive and accept a maximum of 255 Unicode characters.
+     * The value of the tag. Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.
      */
     Value?: String;
   }
@@ -31094,6 +31473,7 @@ declare namespace EC2 {
      */
     Max?: Double;
   }
+  export type TpmSupportValues = "v2.0"|string;
   export type TrafficDirection = "ingress"|"egress"|string;
   export interface TrafficMirrorFilter {
     /**
@@ -31273,11 +31653,15 @@ declare namespace EC2 {
      * The tags assigned to the Traffic Mirror target.
      */
     Tags?: TagList;
+    /**
+     * The ID of the Gateway Load Balancer endpoint.
+     */
+    GatewayLoadBalancerEndpointId?: String;
   }
   export type TrafficMirrorTargetId = string;
   export type TrafficMirrorTargetIdList = TrafficMirrorTargetId[];
   export type TrafficMirrorTargetSet = TrafficMirrorTarget[];
-  export type TrafficMirrorTargetType = "network-interface"|"network-load-balancer"|string;
+  export type TrafficMirrorTargetType = "network-interface"|"network-load-balancer"|"gateway-load-balancer-endpoint"|string;
   export type TrafficMirroringMaxResults = number;
   export type TrafficType = "ACCEPT"|"REJECT"|"ALL"|string;
   export type TransitAssociationGatewayId = string;
@@ -32017,6 +32401,36 @@ declare namespace EC2 {
     State?: TransitGatewayPropagationState;
   }
   export type TransitGatewayRouteTablePropagationList = TransitGatewayRouteTablePropagation[];
+  export interface TransitGatewayRouteTableRoute {
+    /**
+     * The CIDR block used for destination matches.
+     */
+    DestinationCidr?: String;
+    /**
+     * The state of the route.
+     */
+    State?: String;
+    /**
+     * The route origin. The following are the possible values:   static   propagated  
+     */
+    RouteOrigin?: String;
+    /**
+     * The ID of the prefix list.
+     */
+    PrefixListId?: String;
+    /**
+     * The ID of the route attachment.
+     */
+    AttachmentId?: String;
+    /**
+     * The ID of the resource for the route attachment.
+     */
+    ResourceId?: String;
+    /**
+     * The resource type for the route attachment.
+     */
+    ResourceType?: String;
+  }
   export type TransitGatewayRouteTableState = "pending"|"available"|"deleting"|"deleted"|string;
   export type TransitGatewayRouteType = "static"|"propagated"|string;
   export type TransitGatewayState = "pending"|"available"|"modifying"|"deleting"|"deleted"|string;
@@ -32885,7 +33299,7 @@ declare namespace EC2 {
   export type VpcClassicLinkList = VpcClassicLink[];
   export interface VpcEndpoint {
     /**
-     * The ID of the VPC endpoint.
+     * The ID of the endpoint.
      */
     VpcEndpointId?: String;
     /**
@@ -32901,7 +33315,7 @@ declare namespace EC2 {
      */
     ServiceName?: String;
     /**
-     * The state of the VPC endpoint.
+     * The state of the endpoint.
      */
     State?: State;
     /**
@@ -32913,19 +33327,27 @@ declare namespace EC2 {
      */
     RouteTableIds?: ValueStringList;
     /**
-     * (Interface endpoint) One or more subnets in which the endpoint is located.
+     * (Interface endpoint) The subnets for the endpoint.
      */
     SubnetIds?: ValueStringList;
     /**
      * (Interface endpoint) Information about the security groups that are associated with the network interface.
      */
     Groups?: GroupIdentifierSet;
+    /**
+     * The IP address type for the endpoint.
+     */
+    IpAddressType?: IpAddressType;
+    /**
+     * The DNS options for the endpoint.
+     */
+    DnsOptions?: DnsOptions;
     /**
      * (Interface endpoint) Indicates whether the VPC is associated with a private hosted zone.
      */
     PrivateDnsEnabled?: Boolean;
     /**
-     * Indicates whether the VPC endpoint is being managed by its service.
+     * Indicates whether the endpoint is being managed by its service.
      */
     RequesterManaged?: Boolean;
     /**
@@ -32937,19 +33359,19 @@ declare namespace EC2 {
      */
     DnsEntries?: DnsEntrySet;
     /**
-     * The date and time that the VPC endpoint was created.
+     * The date and time that the endpoint was created.
      */
     CreationTimestamp?: MillisecondDateTime;
     /**
-     * Any tags assigned to the VPC endpoint.
+     * Any tags assigned to the endpoint.
      */
     Tags?: TagList;
     /**
-     * The ID of the Amazon Web Services account that owns the VPC endpoint.
+     * The ID of the Amazon Web Services account that owns the endpoint.
      */
     OwnerId?: String;
     /**
-     * The last error that occurred for VPC endpoint.
+     * The last error that occurred for endpoint.
      */
     LastError?: LastError;
   }
@@ -32986,6 +33408,10 @@ declare namespace EC2 {
      * The Amazon Resource Names (ARNs) of the Gateway Load Balancers for the service.
      */
     GatewayLoadBalancerArns?: ValueStringList;
+    /**
+     * The IP address type for the endpoint.
+     */
+    IpAddressType?: IpAddressType;
   }
   export type VpcEndpointConnectionSet = VpcEndpointConnection[];
   export type VpcEndpointId = string;