@pgarbe/cdk-ecr-sync 0.5.25 → 0.5.26

package/node_modules/aws-sdk/clients/secretsmanager.d.ts

@@ -12,179 +12,179 @@ declare class SecretsManager extends Service {
   constructor(options?: SecretsManager.Types.ClientConfiguration)
   config: Config & SecretsManager.Types.ClientConfiguration;
   /**
-   * Turns off automatic rotation, and if a rotation is currently in progress, cancels the rotation. To turn on automatic rotation again, call RotateSecret.  If you cancel a rotation in progress, it can leave the VersionStage labels in an unexpected state. Depending on the step of the rotation in progress, you might need to remove the staging label AWSPENDING from the partially created version, specified by the VersionId response value. We recommend you also evaluate the partially rotated new version to see if it should be deleted. You can delete a version by removing all staging labels from it. 
+   * Turns off automatic rotation, and if a rotation is currently in progress, cancels the rotation. To turn on automatic rotation again, call RotateSecret.  If you cancel a rotation in progress, it can leave the VersionStage labels in an unexpected state. Depending on the step of the rotation in progress, you might need to remove the staging label AWSPENDING from the partially created version, specified by the VersionId response value. We recommend you also evaluate the partially rotated new version to see if it should be deleted. You can delete a version by removing all staging labels from it.   Required permissions:  secretsmanager:CancelRotateSecret. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   cancelRotateSecret(params: SecretsManager.Types.CancelRotateSecretRequest, callback?: (err: AWSError, data: SecretsManager.Types.CancelRotateSecretResponse) => void): Request<SecretsManager.Types.CancelRotateSecretResponse, AWSError>;
   /**
-   * Turns off automatic rotation, and if a rotation is currently in progress, cancels the rotation. To turn on automatic rotation again, call RotateSecret.  If you cancel a rotation in progress, it can leave the VersionStage labels in an unexpected state. Depending on the step of the rotation in progress, you might need to remove the staging label AWSPENDING from the partially created version, specified by the VersionId response value. We recommend you also evaluate the partially rotated new version to see if it should be deleted. You can delete a version by removing all staging labels from it. 
+   * Turns off automatic rotation, and if a rotation is currently in progress, cancels the rotation. To turn on automatic rotation again, call RotateSecret.  If you cancel a rotation in progress, it can leave the VersionStage labels in an unexpected state. Depending on the step of the rotation in progress, you might need to remove the staging label AWSPENDING from the partially created version, specified by the VersionId response value. We recommend you also evaluate the partially rotated new version to see if it should be deleted. You can delete a version by removing all staging labels from it.   Required permissions:  secretsmanager:CancelRotateSecret. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   cancelRotateSecret(callback?: (err: AWSError, data: SecretsManager.Types.CancelRotateSecretResponse) => void): Request<SecretsManager.Types.CancelRotateSecretResponse, AWSError>;
   /**
-   * Creates a new secret. A secret is a set of credentials, such as a user name and password, that you store in an encrypted form in Secrets Manager. The secret also includes the connection information to access a database or other service, which Secrets Manager doesn't encrypt. A secret in Secrets Manager consists of both the protected secret data and the important information needed to manage the secret. For information about creating a secret in the console, see Create a secret. To create a secret, you can provide the secret value to be encrypted in either the SecretString parameter or the SecretBinary parameter, but not both. If you include SecretString or SecretBinary then Secrets Manager creates an initial secret version and automatically attaches the staging label AWSCURRENT to it. If you don't specify an KMS encryption key, Secrets Manager uses the Amazon Web Services managed key aws/secretsmanager. If this key doesn't already exist in your account, then Secrets Manager creates it for you automatically. All users and roles in the Amazon Web Services account automatically have access to use aws/secretsmanager. Creating aws/secretsmanager can result in a one-time significant delay in returning the result. If the secret is in a different Amazon Web Services account from the credentials calling the API, then you can't use aws/secretsmanager to encrypt the secret, and you must create and use a customer managed KMS key. 
+   * Creates a new secret. A secret is a set of credentials, such as a user name and password, that you store in an encrypted form in Secrets Manager. The secret also includes the connection information to access a database or other service, which Secrets Manager doesn't encrypt. A secret in Secrets Manager consists of both the protected secret data and the important information needed to manage the secret. For information about creating a secret in the console, see Create a secret. To create a secret, you can provide the secret value to be encrypted in either the SecretString parameter or the SecretBinary parameter, but not both. If you include SecretString or SecretBinary then Secrets Manager creates an initial secret version and automatically attaches the staging label AWSCURRENT to it. If you don't specify an KMS encryption key, Secrets Manager uses the Amazon Web Services managed key aws/secretsmanager. If this key doesn't already exist in your account, then Secrets Manager creates it for you automatically. All users and roles in the Amazon Web Services account automatically have access to use aws/secretsmanager. Creating aws/secretsmanager can result in a one-time significant delay in returning the result. If the secret is in a different Amazon Web Services account from the credentials calling the API, then you can't use aws/secretsmanager to encrypt the secret, and you must create and use a customer managed KMS key.   Required permissions:  secretsmanager:CreateSecret. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   createSecret(params: SecretsManager.Types.CreateSecretRequest, callback?: (err: AWSError, data: SecretsManager.Types.CreateSecretResponse) => void): Request<SecretsManager.Types.CreateSecretResponse, AWSError>;
   /**
-   * Creates a new secret. A secret is a set of credentials, such as a user name and password, that you store in an encrypted form in Secrets Manager. The secret also includes the connection information to access a database or other service, which Secrets Manager doesn't encrypt. A secret in Secrets Manager consists of both the protected secret data and the important information needed to manage the secret. For information about creating a secret in the console, see Create a secret. To create a secret, you can provide the secret value to be encrypted in either the SecretString parameter or the SecretBinary parameter, but not both. If you include SecretString or SecretBinary then Secrets Manager creates an initial secret version and automatically attaches the staging label AWSCURRENT to it. If you don't specify an KMS encryption key, Secrets Manager uses the Amazon Web Services managed key aws/secretsmanager. If this key doesn't already exist in your account, then Secrets Manager creates it for you automatically. All users and roles in the Amazon Web Services account automatically have access to use aws/secretsmanager. Creating aws/secretsmanager can result in a one-time significant delay in returning the result. If the secret is in a different Amazon Web Services account from the credentials calling the API, then you can't use aws/secretsmanager to encrypt the secret, and you must create and use a customer managed KMS key. 
+   * Creates a new secret. A secret is a set of credentials, such as a user name and password, that you store in an encrypted form in Secrets Manager. The secret also includes the connection information to access a database or other service, which Secrets Manager doesn't encrypt. A secret in Secrets Manager consists of both the protected secret data and the important information needed to manage the secret. For information about creating a secret in the console, see Create a secret. To create a secret, you can provide the secret value to be encrypted in either the SecretString parameter or the SecretBinary parameter, but not both. If you include SecretString or SecretBinary then Secrets Manager creates an initial secret version and automatically attaches the staging label AWSCURRENT to it. If you don't specify an KMS encryption key, Secrets Manager uses the Amazon Web Services managed key aws/secretsmanager. If this key doesn't already exist in your account, then Secrets Manager creates it for you automatically. All users and roles in the Amazon Web Services account automatically have access to use aws/secretsmanager. Creating aws/secretsmanager can result in a one-time significant delay in returning the result. If the secret is in a different Amazon Web Services account from the credentials calling the API, then you can't use aws/secretsmanager to encrypt the secret, and you must create and use a customer managed KMS key.   Required permissions:  secretsmanager:CreateSecret. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   createSecret(callback?: (err: AWSError, data: SecretsManager.Types.CreateSecretResponse) => void): Request<SecretsManager.Types.CreateSecretResponse, AWSError>;
   /**
-   * Deletes the resource-based permission policy attached to the secret. To attach a policy to a secret, use PutResourcePolicy.
+   * Deletes the resource-based permission policy attached to the secret. To attach a policy to a secret, use PutResourcePolicy.  Required permissions:  secretsmanager:DeleteResourcePolicy. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   deleteResourcePolicy(params: SecretsManager.Types.DeleteResourcePolicyRequest, callback?: (err: AWSError, data: SecretsManager.Types.DeleteResourcePolicyResponse) => void): Request<SecretsManager.Types.DeleteResourcePolicyResponse, AWSError>;
   /**
-   * Deletes the resource-based permission policy attached to the secret. To attach a policy to a secret, use PutResourcePolicy.
+   * Deletes the resource-based permission policy attached to the secret. To attach a policy to a secret, use PutResourcePolicy.  Required permissions:  secretsmanager:DeleteResourcePolicy. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   deleteResourcePolicy(callback?: (err: AWSError, data: SecretsManager.Types.DeleteResourcePolicyResponse) => void): Request<SecretsManager.Types.DeleteResourcePolicyResponse, AWSError>;
   /**
-   * Deletes a secret and all of its versions. You can specify a recovery window during which you can restore the secret. The minimum recovery window is 7 days. The default recovery window is 30 days. Secrets Manager attaches a DeletionDate stamp to the secret that specifies the end of the recovery window. At the end of the recovery window, Secrets Manager deletes the secret permanently. For information about deleting a secret in the console, see https://docs.aws.amazon.com/secretsmanager/latest/userguide/manage_delete-secret.html.  Secrets Manager performs the permanent secret deletion at the end of the waiting period as a background task with low priority. There is no guarantee of a specific time after the recovery window for the permanent delete to occur. At any time before recovery window ends, you can use RestoreSecret to remove the DeletionDate and cancel the deletion of the secret. In a secret scheduled for deletion, you cannot access the encrypted secret value. To access that information, first cancel the deletion with RestoreSecret and then retrieve the information.
+   * Deletes a secret and all of its versions. You can specify a recovery window during which you can restore the secret. The minimum recovery window is 7 days. The default recovery window is 30 days. Secrets Manager attaches a DeletionDate stamp to the secret that specifies the end of the recovery window. At the end of the recovery window, Secrets Manager deletes the secret permanently. For information about deleting a secret in the console, see https://docs.aws.amazon.com/secretsmanager/latest/userguide/manage_delete-secret.html.  Secrets Manager performs the permanent secret deletion at the end of the waiting period as a background task with low priority. There is no guarantee of a specific time after the recovery window for the permanent delete to occur. At any time before recovery window ends, you can use RestoreSecret to remove the DeletionDate and cancel the deletion of the secret. In a secret scheduled for deletion, you cannot access the encrypted secret value. To access that information, first cancel the deletion with RestoreSecret and then retrieve the information.  Required permissions:  secretsmanager:DeleteSecret. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   deleteSecret(params: SecretsManager.Types.DeleteSecretRequest, callback?: (err: AWSError, data: SecretsManager.Types.DeleteSecretResponse) => void): Request<SecretsManager.Types.DeleteSecretResponse, AWSError>;
   /**
-   * Deletes a secret and all of its versions. You can specify a recovery window during which you can restore the secret. The minimum recovery window is 7 days. The default recovery window is 30 days. Secrets Manager attaches a DeletionDate stamp to the secret that specifies the end of the recovery window. At the end of the recovery window, Secrets Manager deletes the secret permanently. For information about deleting a secret in the console, see https://docs.aws.amazon.com/secretsmanager/latest/userguide/manage_delete-secret.html.  Secrets Manager performs the permanent secret deletion at the end of the waiting period as a background task with low priority. There is no guarantee of a specific time after the recovery window for the permanent delete to occur. At any time before recovery window ends, you can use RestoreSecret to remove the DeletionDate and cancel the deletion of the secret. In a secret scheduled for deletion, you cannot access the encrypted secret value. To access that information, first cancel the deletion with RestoreSecret and then retrieve the information.
+   * Deletes a secret and all of its versions. You can specify a recovery window during which you can restore the secret. The minimum recovery window is 7 days. The default recovery window is 30 days. Secrets Manager attaches a DeletionDate stamp to the secret that specifies the end of the recovery window. At the end of the recovery window, Secrets Manager deletes the secret permanently. For information about deleting a secret in the console, see https://docs.aws.amazon.com/secretsmanager/latest/userguide/manage_delete-secret.html.  Secrets Manager performs the permanent secret deletion at the end of the waiting period as a background task with low priority. There is no guarantee of a specific time after the recovery window for the permanent delete to occur. At any time before recovery window ends, you can use RestoreSecret to remove the DeletionDate and cancel the deletion of the secret. In a secret scheduled for deletion, you cannot access the encrypted secret value. To access that information, first cancel the deletion with RestoreSecret and then retrieve the information.  Required permissions:  secretsmanager:DeleteSecret. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   deleteSecret(callback?: (err: AWSError, data: SecretsManager.Types.DeleteSecretResponse) => void): Request<SecretsManager.Types.DeleteSecretResponse, AWSError>;
   /**
-   * Retrieves the details of a secret. It does not include the encrypted secret value. Secrets Manager only returns fields that have a value in the response. 
+   * Retrieves the details of a secret. It does not include the encrypted secret value. Secrets Manager only returns fields that have a value in the response.   Required permissions:  secretsmanager:DescribeSecret. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   describeSecret(params: SecretsManager.Types.DescribeSecretRequest, callback?: (err: AWSError, data: SecretsManager.Types.DescribeSecretResponse) => void): Request<SecretsManager.Types.DescribeSecretResponse, AWSError>;
   /**
-   * Retrieves the details of a secret. It does not include the encrypted secret value. Secrets Manager only returns fields that have a value in the response. 
+   * Retrieves the details of a secret. It does not include the encrypted secret value. Secrets Manager only returns fields that have a value in the response.   Required permissions:  secretsmanager:DescribeSecret. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   describeSecret(callback?: (err: AWSError, data: SecretsManager.Types.DescribeSecretResponse) => void): Request<SecretsManager.Types.DescribeSecretResponse, AWSError>;
   /**
-   * Generates a random password. We recommend that you specify the maximum length and include every character type that the system you are generating a password for can support.
+   * Generates a random password. We recommend that you specify the maximum length and include every character type that the system you are generating a password for can support.  Required permissions:  secretsmanager:GetRandomPassword. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   getRandomPassword(params: SecretsManager.Types.GetRandomPasswordRequest, callback?: (err: AWSError, data: SecretsManager.Types.GetRandomPasswordResponse) => void): Request<SecretsManager.Types.GetRandomPasswordResponse, AWSError>;
   /**
-   * Generates a random password. We recommend that you specify the maximum length and include every character type that the system you are generating a password for can support.
+   * Generates a random password. We recommend that you specify the maximum length and include every character type that the system you are generating a password for can support.  Required permissions:  secretsmanager:GetRandomPassword. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   getRandomPassword(callback?: (err: AWSError, data: SecretsManager.Types.GetRandomPasswordResponse) => void): Request<SecretsManager.Types.GetRandomPasswordResponse, AWSError>;
   /**
-   * Retrieves the JSON text of the resource-based policy document attached to the secret. For more information about permissions policies attached to a secret, see Permissions policies attached to a secret.
+   * Retrieves the JSON text of the resource-based policy document attached to the secret. For more information about permissions policies attached to a secret, see Permissions policies attached to a secret.  Required permissions:  secretsmanager:GetResourcePolicy. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   getResourcePolicy(params: SecretsManager.Types.GetResourcePolicyRequest, callback?: (err: AWSError, data: SecretsManager.Types.GetResourcePolicyResponse) => void): Request<SecretsManager.Types.GetResourcePolicyResponse, AWSError>;
   /**
-   * Retrieves the JSON text of the resource-based policy document attached to the secret. For more information about permissions policies attached to a secret, see Permissions policies attached to a secret.
+   * Retrieves the JSON text of the resource-based policy document attached to the secret. For more information about permissions policies attached to a secret, see Permissions policies attached to a secret.  Required permissions:  secretsmanager:GetResourcePolicy. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   getResourcePolicy(callback?: (err: AWSError, data: SecretsManager.Types.GetResourcePolicyResponse) => void): Request<SecretsManager.Types.GetResourcePolicyResponse, AWSError>;
   /**
-   * Retrieves the contents of the encrypted fields SecretString or SecretBinary from the specified version of a secret, whichever contains content. For information about retrieving the secret value in the console, see Retrieve secrets.  To run this command, you must have secretsmanager:GetSecretValue permissions. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key aws/secretsmanager, then you also need kms:Decrypt permissions for that key.
+   * Retrieves the contents of the encrypted fields SecretString or SecretBinary from the specified version of a secret, whichever contains content. We recommend that you cache your secret values by using client-side caching. Caching secrets improves speed and reduces your costs. For more information, see Cache secrets for your applications.  Required permissions:  secretsmanager:GetSecretValue. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key aws/secretsmanager, then you also need kms:Decrypt permissions for that key. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   getSecretValue(params: SecretsManager.Types.GetSecretValueRequest, callback?: (err: AWSError, data: SecretsManager.Types.GetSecretValueResponse) => void): Request<SecretsManager.Types.GetSecretValueResponse, AWSError>;
   /**
-   * Retrieves the contents of the encrypted fields SecretString or SecretBinary from the specified version of a secret, whichever contains content. For information about retrieving the secret value in the console, see Retrieve secrets.  To run this command, you must have secretsmanager:GetSecretValue permissions. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key aws/secretsmanager, then you also need kms:Decrypt permissions for that key.
+   * Retrieves the contents of the encrypted fields SecretString or SecretBinary from the specified version of a secret, whichever contains content. We recommend that you cache your secret values by using client-side caching. Caching secrets improves speed and reduces your costs. For more information, see Cache secrets for your applications.  Required permissions:  secretsmanager:GetSecretValue. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key aws/secretsmanager, then you also need kms:Decrypt permissions for that key. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   getSecretValue(callback?: (err: AWSError, data: SecretsManager.Types.GetSecretValueResponse) => void): Request<SecretsManager.Types.GetSecretValueResponse, AWSError>;
   /**
-   * Lists the versions for a secret.  To list the secrets in the account, use ListSecrets. To get the secret value from SecretString or SecretBinary, call GetSecretValue.  Minimum permissions  To run this command, you must have secretsmanager:ListSecretVersionIds permissions.
+   * Lists the versions for a secret.  To list the secrets in the account, use ListSecrets. To get the secret value from SecretString or SecretBinary, call GetSecretValue.  Required permissions:  secretsmanager:ListSecretVersionIds. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   listSecretVersionIds(params: SecretsManager.Types.ListSecretVersionIdsRequest, callback?: (err: AWSError, data: SecretsManager.Types.ListSecretVersionIdsResponse) => void): Request<SecretsManager.Types.ListSecretVersionIdsResponse, AWSError>;
   /**
-   * Lists the versions for a secret.  To list the secrets in the account, use ListSecrets. To get the secret value from SecretString or SecretBinary, call GetSecretValue.  Minimum permissions  To run this command, you must have secretsmanager:ListSecretVersionIds permissions.
+   * Lists the versions for a secret.  To list the secrets in the account, use ListSecrets. To get the secret value from SecretString or SecretBinary, call GetSecretValue.  Required permissions:  secretsmanager:ListSecretVersionIds. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   listSecretVersionIds(callback?: (err: AWSError, data: SecretsManager.Types.ListSecretVersionIdsResponse) => void): Request<SecretsManager.Types.ListSecretVersionIdsResponse, AWSError>;
   /**
-   * Lists the secrets that are stored by Secrets Manager in the Amazon Web Services account.  To list the versions of a secret, use ListSecretVersionIds. To get the secret value from SecretString or SecretBinary, call GetSecretValue. For information about finding secrets in the console, see Enhanced search capabilities for secrets in Secrets Manager.  Minimum permissions  To run this command, you must have secretsmanager:ListSecrets permissions.
+   * Lists the secrets that are stored by Secrets Manager in the Amazon Web Services account.  To list the versions of a secret, use ListSecretVersionIds. To get the secret value from SecretString or SecretBinary, call GetSecretValue. For information about finding secrets in the console, see Enhanced search capabilities for secrets in Secrets Manager.  Required permissions:  secretsmanager:ListSecrets. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   listSecrets(params: SecretsManager.Types.ListSecretsRequest, callback?: (err: AWSError, data: SecretsManager.Types.ListSecretsResponse) => void): Request<SecretsManager.Types.ListSecretsResponse, AWSError>;
   /**
-   * Lists the secrets that are stored by Secrets Manager in the Amazon Web Services account.  To list the versions of a secret, use ListSecretVersionIds. To get the secret value from SecretString or SecretBinary, call GetSecretValue. For information about finding secrets in the console, see Enhanced search capabilities for secrets in Secrets Manager.  Minimum permissions  To run this command, you must have secretsmanager:ListSecrets permissions.
+   * Lists the secrets that are stored by Secrets Manager in the Amazon Web Services account.  To list the versions of a secret, use ListSecretVersionIds. To get the secret value from SecretString or SecretBinary, call GetSecretValue. For information about finding secrets in the console, see Enhanced search capabilities for secrets in Secrets Manager.  Required permissions:  secretsmanager:ListSecrets. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   listSecrets(callback?: (err: AWSError, data: SecretsManager.Types.ListSecretsResponse) => void): Request<SecretsManager.Types.ListSecretsResponse, AWSError>;
   /**
-   * Attaches a resource-based permission policy to a secret. A resource-based policy is optional. For more information, see Authentication and access control for Secrets Manager  For information about attaching a policy in the console, see Attach a permissions policy to a secret.
+   * Attaches a resource-based permission policy to a secret. A resource-based policy is optional. For more information, see Authentication and access control for Secrets Manager  For information about attaching a policy in the console, see Attach a permissions policy to a secret.  Required permissions:  secretsmanager:PutResourcePolicy. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   putResourcePolicy(params: SecretsManager.Types.PutResourcePolicyRequest, callback?: (err: AWSError, data: SecretsManager.Types.PutResourcePolicyResponse) => void): Request<SecretsManager.Types.PutResourcePolicyResponse, AWSError>;
   /**
-   * Attaches a resource-based permission policy to a secret. A resource-based policy is optional. For more information, see Authentication and access control for Secrets Manager  For information about attaching a policy in the console, see Attach a permissions policy to a secret.
+   * Attaches a resource-based permission policy to a secret. A resource-based policy is optional. For more information, see Authentication and access control for Secrets Manager  For information about attaching a policy in the console, see Attach a permissions policy to a secret.  Required permissions:  secretsmanager:PutResourcePolicy. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   putResourcePolicy(callback?: (err: AWSError, data: SecretsManager.Types.PutResourcePolicyResponse) => void): Request<SecretsManager.Types.PutResourcePolicyResponse, AWSError>;
   /**
-   * Creates a new version with a new encrypted secret value and attaches it to the secret. The version can contain a new SecretString value or a new SecretBinary value.  We recommend you avoid calling PutSecretValue at a sustained rate of more than once every 10 minutes. When you update the secret value, Secrets Manager creates a new version of the secret. Secrets Manager removes outdated versions when there are more than 100, but it does not remove versions created less than 24 hours ago. If you call PutSecretValue more than once every 10 minutes, you create more versions than Secrets Manager removes, and you will reach the quota for secret versions. You can specify the staging labels to attach to the new version in VersionStages. If you don't include VersionStages, then Secrets Manager automatically moves the staging label AWSCURRENT to this version. If this operation creates the first version for the secret, then Secrets Manager automatically attaches the staging label AWSCURRENT to it . If this operation moves the staging label AWSCURRENT from another version to this version, then Secrets Manager also automatically moves the staging label AWSPREVIOUS to the version that AWSCURRENT was removed from. This operation is idempotent. If a version with a VersionId with the same value as the ClientRequestToken parameter already exists, and you specify the same secret data, the operation succeeds but does nothing. However, if the secret data is different, then the operation fails because you can't modify an existing version; you can only create new ones.
+   * Creates a new version with a new encrypted secret value and attaches it to the secret. The version can contain a new SecretString value or a new SecretBinary value.  We recommend you avoid calling PutSecretValue at a sustained rate of more than once every 10 minutes. When you update the secret value, Secrets Manager creates a new version of the secret. Secrets Manager removes outdated versions when there are more than 100, but it does not remove versions created less than 24 hours ago. If you call PutSecretValue more than once every 10 minutes, you create more versions than Secrets Manager removes, and you will reach the quota for secret versions. You can specify the staging labels to attach to the new version in VersionStages. If you don't include VersionStages, then Secrets Manager automatically moves the staging label AWSCURRENT to this version. If this operation creates the first version for the secret, then Secrets Manager automatically attaches the staging label AWSCURRENT to it . If this operation moves the staging label AWSCURRENT from another version to this version, then Secrets Manager also automatically moves the staging label AWSPREVIOUS to the version that AWSCURRENT was removed from. This operation is idempotent. If a version with a VersionId with the same value as the ClientRequestToken parameter already exists, and you specify the same secret data, the operation succeeds but does nothing. However, if the secret data is different, then the operation fails because you can't modify an existing version; you can only create new ones.  Required permissions:  secretsmanager:PutSecretValue. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   putSecretValue(params: SecretsManager.Types.PutSecretValueRequest, callback?: (err: AWSError, data: SecretsManager.Types.PutSecretValueResponse) => void): Request<SecretsManager.Types.PutSecretValueResponse, AWSError>;
   /**
-   * Creates a new version with a new encrypted secret value and attaches it to the secret. The version can contain a new SecretString value or a new SecretBinary value.  We recommend you avoid calling PutSecretValue at a sustained rate of more than once every 10 minutes. When you update the secret value, Secrets Manager creates a new version of the secret. Secrets Manager removes outdated versions when there are more than 100, but it does not remove versions created less than 24 hours ago. If you call PutSecretValue more than once every 10 minutes, you create more versions than Secrets Manager removes, and you will reach the quota for secret versions. You can specify the staging labels to attach to the new version in VersionStages. If you don't include VersionStages, then Secrets Manager automatically moves the staging label AWSCURRENT to this version. If this operation creates the first version for the secret, then Secrets Manager automatically attaches the staging label AWSCURRENT to it . If this operation moves the staging label AWSCURRENT from another version to this version, then Secrets Manager also automatically moves the staging label AWSPREVIOUS to the version that AWSCURRENT was removed from. This operation is idempotent. If a version with a VersionId with the same value as the ClientRequestToken parameter already exists, and you specify the same secret data, the operation succeeds but does nothing. However, if the secret data is different, then the operation fails because you can't modify an existing version; you can only create new ones.
+   * Creates a new version with a new encrypted secret value and attaches it to the secret. The version can contain a new SecretString value or a new SecretBinary value.  We recommend you avoid calling PutSecretValue at a sustained rate of more than once every 10 minutes. When you update the secret value, Secrets Manager creates a new version of the secret. Secrets Manager removes outdated versions when there are more than 100, but it does not remove versions created less than 24 hours ago. If you call PutSecretValue more than once every 10 minutes, you create more versions than Secrets Manager removes, and you will reach the quota for secret versions. You can specify the staging labels to attach to the new version in VersionStages. If you don't include VersionStages, then Secrets Manager automatically moves the staging label AWSCURRENT to this version. If this operation creates the first version for the secret, then Secrets Manager automatically attaches the staging label AWSCURRENT to it . If this operation moves the staging label AWSCURRENT from another version to this version, then Secrets Manager also automatically moves the staging label AWSPREVIOUS to the version that AWSCURRENT was removed from. This operation is idempotent. If a version with a VersionId with the same value as the ClientRequestToken parameter already exists, and you specify the same secret data, the operation succeeds but does nothing. However, if the secret data is different, then the operation fails because you can't modify an existing version; you can only create new ones.  Required permissions:  secretsmanager:PutSecretValue. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   putSecretValue(callback?: (err: AWSError, data: SecretsManager.Types.PutSecretValueResponse) => void): Request<SecretsManager.Types.PutSecretValueResponse, AWSError>;
   /**
-   * For a secret that is replicated to other Regions, deletes the secret replicas from the Regions you specify.
+   * For a secret that is replicated to other Regions, deletes the secret replicas from the Regions you specify.  Required permissions:  secretsmanager:RemoveRegionsFromReplication. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   removeRegionsFromReplication(params: SecretsManager.Types.RemoveRegionsFromReplicationRequest, callback?: (err: AWSError, data: SecretsManager.Types.RemoveRegionsFromReplicationResponse) => void): Request<SecretsManager.Types.RemoveRegionsFromReplicationResponse, AWSError>;
   /**
-   * For a secret that is replicated to other Regions, deletes the secret replicas from the Regions you specify.
+   * For a secret that is replicated to other Regions, deletes the secret replicas from the Regions you specify.  Required permissions:  secretsmanager:RemoveRegionsFromReplication. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   removeRegionsFromReplication(callback?: (err: AWSError, data: SecretsManager.Types.RemoveRegionsFromReplicationResponse) => void): Request<SecretsManager.Types.RemoveRegionsFromReplicationResponse, AWSError>;
   /**
-   * Replicates the secret to a new Regions. See Multi-Region secrets.
+   * Replicates the secret to a new Regions. See Multi-Region secrets.  Required permissions:  secretsmanager:ReplicateSecretToRegions. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   replicateSecretToRegions(params: SecretsManager.Types.ReplicateSecretToRegionsRequest, callback?: (err: AWSError, data: SecretsManager.Types.ReplicateSecretToRegionsResponse) => void): Request<SecretsManager.Types.ReplicateSecretToRegionsResponse, AWSError>;
   /**
-   * Replicates the secret to a new Regions. See Multi-Region secrets.
+   * Replicates the secret to a new Regions. See Multi-Region secrets.  Required permissions:  secretsmanager:ReplicateSecretToRegions. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   replicateSecretToRegions(callback?: (err: AWSError, data: SecretsManager.Types.ReplicateSecretToRegionsResponse) => void): Request<SecretsManager.Types.ReplicateSecretToRegionsResponse, AWSError>;
   /**
-   * Cancels the scheduled deletion of a secret by removing the DeletedDate time stamp. You can access a secret again after it has been restored.
+   * Cancels the scheduled deletion of a secret by removing the DeletedDate time stamp. You can access a secret again after it has been restored.  Required permissions:  secretsmanager:RestoreSecret. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   restoreSecret(params: SecretsManager.Types.RestoreSecretRequest, callback?: (err: AWSError, data: SecretsManager.Types.RestoreSecretResponse) => void): Request<SecretsManager.Types.RestoreSecretResponse, AWSError>;
   /**
-   * Cancels the scheduled deletion of a secret by removing the DeletedDate time stamp. You can access a secret again after it has been restored.
+   * Cancels the scheduled deletion of a secret by removing the DeletedDate time stamp. You can access a secret again after it has been restored.  Required permissions:  secretsmanager:RestoreSecret. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   restoreSecret(callback?: (err: AWSError, data: SecretsManager.Types.RestoreSecretResponse) => void): Request<SecretsManager.Types.RestoreSecretResponse, AWSError>;
   /**
-   * Configures and starts the asynchronous process of rotating the secret. If you include the configuration parameters, the operation sets the values for the secret and then immediately starts a rotation. If you don't include the configuration parameters, the operation starts a rotation with the values already stored in the secret. For more information about rotation, see Rotate secrets. To configure rotation, you include the ARN of an Amazon Web Services Lambda function and the schedule for the rotation. The Lambda rotation function creates a new version of the secret and creates or updates the credentials on the database or service to match. After testing the new credentials, the function marks the new secret version with the staging label AWSCURRENT. Then anyone who retrieves the secret gets the new version. For more information, see How rotation works. When rotation is successful, the AWSPENDING staging label might be attached to the same version as the AWSCURRENT version, or it might not be attached to any version. If the AWSPENDING staging label is present but not attached to the same version as AWSCURRENT, then any later invocation of RotateSecret assumes that a previous rotation request is still in progress and returns an error. To run this command, you must have secretsmanager:RotateSecret permissions and lambda:InvokeFunction permissions on the function specified in the secret's metadata.
+   * Configures and starts the asynchronous process of rotating the secret. If you include the configuration parameters, the operation sets the values for the secret and then immediately starts a rotation. If you don't include the configuration parameters, the operation starts a rotation with the values already stored in the secret. For more information about rotation, see Rotate secrets. To configure rotation, you include the ARN of an Amazon Web Services Lambda function and the schedule for the rotation. The Lambda rotation function creates a new version of the secret and creates or updates the credentials on the database or service to match. After testing the new credentials, the function marks the new secret version with the staging label AWSCURRENT. Then anyone who retrieves the secret gets the new version. For more information, see How rotation works. When rotation is successful, the AWSPENDING staging label might be attached to the same version as the AWSCURRENT version, or it might not be attached to any version. If the AWSPENDING staging label is present but not attached to the same version as AWSCURRENT, then any later invocation of RotateSecret assumes that a previous rotation request is still in progress and returns an error.  Required permissions:  secretsmanager:RotateSecret. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. You also need lambda:InvokeFunction permissions on the rotation function. For more information, see  Permissions for rotation.
    */
   rotateSecret(params: SecretsManager.Types.RotateSecretRequest, callback?: (err: AWSError, data: SecretsManager.Types.RotateSecretResponse) => void): Request<SecretsManager.Types.RotateSecretResponse, AWSError>;
   /**
-   * Configures and starts the asynchronous process of rotating the secret. If you include the configuration parameters, the operation sets the values for the secret and then immediately starts a rotation. If you don't include the configuration parameters, the operation starts a rotation with the values already stored in the secret. For more information about rotation, see Rotate secrets. To configure rotation, you include the ARN of an Amazon Web Services Lambda function and the schedule for the rotation. The Lambda rotation function creates a new version of the secret and creates or updates the credentials on the database or service to match. After testing the new credentials, the function marks the new secret version with the staging label AWSCURRENT. Then anyone who retrieves the secret gets the new version. For more information, see How rotation works. When rotation is successful, the AWSPENDING staging label might be attached to the same version as the AWSCURRENT version, or it might not be attached to any version. If the AWSPENDING staging label is present but not attached to the same version as AWSCURRENT, then any later invocation of RotateSecret assumes that a previous rotation request is still in progress and returns an error. To run this command, you must have secretsmanager:RotateSecret permissions and lambda:InvokeFunction permissions on the function specified in the secret's metadata.
+   * Configures and starts the asynchronous process of rotating the secret. If you include the configuration parameters, the operation sets the values for the secret and then immediately starts a rotation. If you don't include the configuration parameters, the operation starts a rotation with the values already stored in the secret. For more information about rotation, see Rotate secrets. To configure rotation, you include the ARN of an Amazon Web Services Lambda function and the schedule for the rotation. The Lambda rotation function creates a new version of the secret and creates or updates the credentials on the database or service to match. After testing the new credentials, the function marks the new secret version with the staging label AWSCURRENT. Then anyone who retrieves the secret gets the new version. For more information, see How rotation works. When rotation is successful, the AWSPENDING staging label might be attached to the same version as the AWSCURRENT version, or it might not be attached to any version. If the AWSPENDING staging label is present but not attached to the same version as AWSCURRENT, then any later invocation of RotateSecret assumes that a previous rotation request is still in progress and returns an error.  Required permissions:  secretsmanager:RotateSecret. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. You also need lambda:InvokeFunction permissions on the rotation function. For more information, see  Permissions for rotation.
    */
   rotateSecret(callback?: (err: AWSError, data: SecretsManager.Types.RotateSecretResponse) => void): Request<SecretsManager.Types.RotateSecretResponse, AWSError>;
   /**
-   * Removes the link between the replica secret and the primary secret and promotes the replica to a primary secret in the replica Region. You must call this operation from the Region in which you want to promote the replica to a primary secret.
+   * Removes the link between the replica secret and the primary secret and promotes the replica to a primary secret in the replica Region. You must call this operation from the Region in which you want to promote the replica to a primary secret.  Required permissions:  secretsmanager:StopReplicationToReplica. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   stopReplicationToReplica(params: SecretsManager.Types.StopReplicationToReplicaRequest, callback?: (err: AWSError, data: SecretsManager.Types.StopReplicationToReplicaResponse) => void): Request<SecretsManager.Types.StopReplicationToReplicaResponse, AWSError>;
   /**
-   * Removes the link between the replica secret and the primary secret and promotes the replica to a primary secret in the replica Region. You must call this operation from the Region in which you want to promote the replica to a primary secret.
+   * Removes the link between the replica secret and the primary secret and promotes the replica to a primary secret in the replica Region. You must call this operation from the Region in which you want to promote the replica to a primary secret.  Required permissions:  secretsmanager:StopReplicationToReplica. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   stopReplicationToReplica(callback?: (err: AWSError, data: SecretsManager.Types.StopReplicationToReplicaResponse) => void): Request<SecretsManager.Types.StopReplicationToReplicaResponse, AWSError>;
   /**
-   * Attaches tags to a secret. Tags consist of a key name and a value. Tags are part of the secret's metadata. They are not associated with specific versions of the secret. This operation appends tags to the existing list of tags. The following restrictions apply to tags:   Maximum number of tags per secret: 50   Maximum key length: 127 Unicode characters in UTF-8   Maximum value length: 255 Unicode characters in UTF-8   Tag keys and values are case sensitive.   Do not use the aws: prefix in your tag names or values because Amazon Web Services reserves it for Amazon Web Services use. You can't edit or delete tag names or values with this prefix. Tags with this prefix do not count against your tags per secret limit.   If you use your tagging schema across multiple services and resources, other services might have restrictions on allowed characters. Generally allowed characters: letters, spaces, and numbers representable in UTF-8, plus the following special characters: + - = . _ : / @.    If you use tags as part of your security strategy, then adding or removing a tag can change permissions. If successfully completing this operation would result in you losing your permissions for this secret, then the operation is blocked and returns an Access Denied error. 
+   * Attaches tags to a secret. Tags consist of a key name and a value. Tags are part of the secret's metadata. They are not associated with specific versions of the secret. This operation appends tags to the existing list of tags. The following restrictions apply to tags:   Maximum number of tags per secret: 50   Maximum key length: 127 Unicode characters in UTF-8   Maximum value length: 255 Unicode characters in UTF-8   Tag keys and values are case sensitive.   Do not use the aws: prefix in your tag names or values because Amazon Web Services reserves it for Amazon Web Services use. You can't edit or delete tag names or values with this prefix. Tags with this prefix do not count against your tags per secret limit.   If you use your tagging schema across multiple services and resources, other services might have restrictions on allowed characters. Generally allowed characters: letters, spaces, and numbers representable in UTF-8, plus the following special characters: + - = . _ : / @.    If you use tags as part of your security strategy, then adding or removing a tag can change permissions. If successfully completing this operation would result in you losing your permissions for this secret, then the operation is blocked and returns an Access Denied error.   Required permissions:  secretsmanager:TagResource. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   tagResource(params: SecretsManager.Types.TagResourceRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Attaches tags to a secret. Tags consist of a key name and a value. Tags are part of the secret's metadata. They are not associated with specific versions of the secret. This operation appends tags to the existing list of tags. The following restrictions apply to tags:   Maximum number of tags per secret: 50   Maximum key length: 127 Unicode characters in UTF-8   Maximum value length: 255 Unicode characters in UTF-8   Tag keys and values are case sensitive.   Do not use the aws: prefix in your tag names or values because Amazon Web Services reserves it for Amazon Web Services use. You can't edit or delete tag names or values with this prefix. Tags with this prefix do not count against your tags per secret limit.   If you use your tagging schema across multiple services and resources, other services might have restrictions on allowed characters. Generally allowed characters: letters, spaces, and numbers representable in UTF-8, plus the following special characters: + - = . _ : / @.    If you use tags as part of your security strategy, then adding or removing a tag can change permissions. If successfully completing this operation would result in you losing your permissions for this secret, then the operation is blocked and returns an Access Denied error. 
+   * Attaches tags to a secret. Tags consist of a key name and a value. Tags are part of the secret's metadata. They are not associated with specific versions of the secret. This operation appends tags to the existing list of tags. The following restrictions apply to tags:   Maximum number of tags per secret: 50   Maximum key length: 127 Unicode characters in UTF-8   Maximum value length: 255 Unicode characters in UTF-8   Tag keys and values are case sensitive.   Do not use the aws: prefix in your tag names or values because Amazon Web Services reserves it for Amazon Web Services use. You can't edit or delete tag names or values with this prefix. Tags with this prefix do not count against your tags per secret limit.   If you use your tagging schema across multiple services and resources, other services might have restrictions on allowed characters. Generally allowed characters: letters, spaces, and numbers representable in UTF-8, plus the following special characters: + - = . _ : / @.    If you use tags as part of your security strategy, then adding or removing a tag can change permissions. If successfully completing this operation would result in you losing your permissions for this secret, then the operation is blocked and returns an Access Denied error.   Required permissions:  secretsmanager:TagResource. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   tagResource(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Removes specific tags from a secret. This operation is idempotent. If a requested tag is not attached to the secret, no error is returned and the secret metadata is unchanged.  If you use tags as part of your security strategy, then removing a tag can change permissions. If successfully completing this operation would result in you losing your permissions for this secret, then the operation is blocked and returns an Access Denied error. 
+   * Removes specific tags from a secret. This operation is idempotent. If a requested tag is not attached to the secret, no error is returned and the secret metadata is unchanged.  If you use tags as part of your security strategy, then removing a tag can change permissions. If successfully completing this operation would result in you losing your permissions for this secret, then the operation is blocked and returns an Access Denied error.   Required permissions:  secretsmanager:UntagResource. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   untagResource(params: SecretsManager.Types.UntagResourceRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Removes specific tags from a secret. This operation is idempotent. If a requested tag is not attached to the secret, no error is returned and the secret metadata is unchanged.  If you use tags as part of your security strategy, then removing a tag can change permissions. If successfully completing this operation would result in you losing your permissions for this secret, then the operation is blocked and returns an Access Denied error. 
+   * Removes specific tags from a secret. This operation is idempotent. If a requested tag is not attached to the secret, no error is returned and the secret metadata is unchanged.  If you use tags as part of your security strategy, then removing a tag can change permissions. If successfully completing this operation would result in you losing your permissions for this secret, then the operation is blocked and returns an Access Denied error.   Required permissions:  secretsmanager:UntagResource. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   untagResource(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Modifies the details of a secret, including metadata and the secret value. To change the secret value, you can also use PutSecretValue. To change the rotation configuration of a secret, use RotateSecret instead. We recommend you avoid calling UpdateSecret at a sustained rate of more than once every 10 minutes. When you call UpdateSecret to update the secret value, Secrets Manager creates a new version of the secret. Secrets Manager removes outdated versions when there are more than 100, but it does not remove versions created less than 24 hours ago. If you update the secret value more than once every 10 minutes, you create more versions than Secrets Manager removes, and you will reach the quota for secret versions. If you include SecretString or SecretBinary to create a new secret version, Secrets Manager automatically attaches the staging label AWSCURRENT to the new version.  If you call this operation with a VersionId that matches an existing version's ClientRequestToken, the operation results in an error. You can't modify an existing version, you can only create a new version. To remove a version, remove all staging labels from it. See UpdateSecretVersionStage. If you don't specify an KMS encryption key, Secrets Manager uses the Amazon Web Services managed key aws/secretsmanager. If this key doesn't already exist in your account, then Secrets Manager creates it for you automatically. All users and roles in the Amazon Web Services account automatically have access to use aws/secretsmanager. Creating aws/secretsmanager can result in a one-time significant delay in returning the result.  If the secret is in a different Amazon Web Services account from the credentials calling the API, then you can't use aws/secretsmanager to encrypt the secret, and you must create and use a customer managed key.  To run this command, you must have secretsmanager:UpdateSecret permissions. If you use a customer managed key, you must also have kms:GenerateDataKey and kms:Decrypt permissions .
+   * Modifies the details of a secret, including metadata and the secret value. To change the secret value, you can also use PutSecretValue. To change the rotation configuration of a secret, use RotateSecret instead. We recommend you avoid calling UpdateSecret at a sustained rate of more than once every 10 minutes. When you call UpdateSecret to update the secret value, Secrets Manager creates a new version of the secret. Secrets Manager removes outdated versions when there are more than 100, but it does not remove versions created less than 24 hours ago. If you update the secret value more than once every 10 minutes, you create more versions than Secrets Manager removes, and you will reach the quota for secret versions. If you include SecretString or SecretBinary to create a new secret version, Secrets Manager automatically attaches the staging label AWSCURRENT to the new version.  If you call this operation with a VersionId that matches an existing version's ClientRequestToken, the operation results in an error. You can't modify an existing version, you can only create a new version. To remove a version, remove all staging labels from it. See UpdateSecretVersionStage. If you don't specify an KMS encryption key, Secrets Manager uses the Amazon Web Services managed key aws/secretsmanager. If this key doesn't already exist in your account, then Secrets Manager creates it for you automatically. All users and roles in the Amazon Web Services account automatically have access to use aws/secretsmanager. Creating aws/secretsmanager can result in a one-time significant delay in returning the result.  If the secret is in a different Amazon Web Services account from the credentials calling the API, then you can't use aws/secretsmanager to encrypt the secret, and you must create and use a customer managed key.   Required permissions:  secretsmanager:UpdateSecret. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. If you use a customer managed key, you must also have kms:GenerateDataKey and kms:Decrypt permissions on the key. For more information, see  Secret encryption and decryption.
    */
   updateSecret(params: SecretsManager.Types.UpdateSecretRequest, callback?: (err: AWSError, data: SecretsManager.Types.UpdateSecretResponse) => void): Request<SecretsManager.Types.UpdateSecretResponse, AWSError>;
   /**
-   * Modifies the details of a secret, including metadata and the secret value. To change the secret value, you can also use PutSecretValue. To change the rotation configuration of a secret, use RotateSecret instead. We recommend you avoid calling UpdateSecret at a sustained rate of more than once every 10 minutes. When you call UpdateSecret to update the secret value, Secrets Manager creates a new version of the secret. Secrets Manager removes outdated versions when there are more than 100, but it does not remove versions created less than 24 hours ago. If you update the secret value more than once every 10 minutes, you create more versions than Secrets Manager removes, and you will reach the quota for secret versions. If you include SecretString or SecretBinary to create a new secret version, Secrets Manager automatically attaches the staging label AWSCURRENT to the new version.  If you call this operation with a VersionId that matches an existing version's ClientRequestToken, the operation results in an error. You can't modify an existing version, you can only create a new version. To remove a version, remove all staging labels from it. See UpdateSecretVersionStage. If you don't specify an KMS encryption key, Secrets Manager uses the Amazon Web Services managed key aws/secretsmanager. If this key doesn't already exist in your account, then Secrets Manager creates it for you automatically. All users and roles in the Amazon Web Services account automatically have access to use aws/secretsmanager. Creating aws/secretsmanager can result in a one-time significant delay in returning the result.  If the secret is in a different Amazon Web Services account from the credentials calling the API, then you can't use aws/secretsmanager to encrypt the secret, and you must create and use a customer managed key.  To run this command, you must have secretsmanager:UpdateSecret permissions. If you use a customer managed key, you must also have kms:GenerateDataKey and kms:Decrypt permissions .
+   * Modifies the details of a secret, including metadata and the secret value. To change the secret value, you can also use PutSecretValue. To change the rotation configuration of a secret, use RotateSecret instead. We recommend you avoid calling UpdateSecret at a sustained rate of more than once every 10 minutes. When you call UpdateSecret to update the secret value, Secrets Manager creates a new version of the secret. Secrets Manager removes outdated versions when there are more than 100, but it does not remove versions created less than 24 hours ago. If you update the secret value more than once every 10 minutes, you create more versions than Secrets Manager removes, and you will reach the quota for secret versions. If you include SecretString or SecretBinary to create a new secret version, Secrets Manager automatically attaches the staging label AWSCURRENT to the new version.  If you call this operation with a VersionId that matches an existing version's ClientRequestToken, the operation results in an error. You can't modify an existing version, you can only create a new version. To remove a version, remove all staging labels from it. See UpdateSecretVersionStage. If you don't specify an KMS encryption key, Secrets Manager uses the Amazon Web Services managed key aws/secretsmanager. If this key doesn't already exist in your account, then Secrets Manager creates it for you automatically. All users and roles in the Amazon Web Services account automatically have access to use aws/secretsmanager. Creating aws/secretsmanager can result in a one-time significant delay in returning the result.  If the secret is in a different Amazon Web Services account from the credentials calling the API, then you can't use aws/secretsmanager to encrypt the secret, and you must create and use a customer managed key.   Required permissions:  secretsmanager:UpdateSecret. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. If you use a customer managed key, you must also have kms:GenerateDataKey and kms:Decrypt permissions on the key. For more information, see  Secret encryption and decryption.
    */
   updateSecret(callback?: (err: AWSError, data: SecretsManager.Types.UpdateSecretResponse) => void): Request<SecretsManager.Types.UpdateSecretResponse, AWSError>;
   /**
-   * Modifies the staging labels attached to a version of a secret. Secrets Manager uses staging labels to track a version as it progresses through the secret rotation process. Each staging label can be attached to only one version at a time. To add a staging label to a version when it is already attached to another version, Secrets Manager first removes it from the other version first and then attaches it to this one. For more information about versions and staging labels, see Concepts: Version.  The staging labels that you specify in the VersionStage parameter are added to the existing list of staging labels for the version.  You can move the AWSCURRENT staging label to this version by including it in this call.  Whenever you move AWSCURRENT, Secrets Manager automatically moves the label AWSPREVIOUS to the version that AWSCURRENT was removed from.  If this action results in the last label being removed from a version, then the version is considered to be 'deprecated' and can be deleted by Secrets Manager.
+   * Modifies the staging labels attached to a version of a secret. Secrets Manager uses staging labels to track a version as it progresses through the secret rotation process. Each staging label can be attached to only one version at a time. To add a staging label to a version when it is already attached to another version, Secrets Manager first removes it from the other version first and then attaches it to this one. For more information about versions and staging labels, see Concepts: Version.  The staging labels that you specify in the VersionStage parameter are added to the existing list of staging labels for the version.  You can move the AWSCURRENT staging label to this version by including it in this call.  Whenever you move AWSCURRENT, Secrets Manager automatically moves the label AWSPREVIOUS to the version that AWSCURRENT was removed from.  If this action results in the last label being removed from a version, then the version is considered to be 'deprecated' and can be deleted by Secrets Manager.  Required permissions:  secretsmanager:UpdateSecretVersionStage. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   updateSecretVersionStage(params: SecretsManager.Types.UpdateSecretVersionStageRequest, callback?: (err: AWSError, data: SecretsManager.Types.UpdateSecretVersionStageResponse) => void): Request<SecretsManager.Types.UpdateSecretVersionStageResponse, AWSError>;
   /**
-   * Modifies the staging labels attached to a version of a secret. Secrets Manager uses staging labels to track a version as it progresses through the secret rotation process. Each staging label can be attached to only one version at a time. To add a staging label to a version when it is already attached to another version, Secrets Manager first removes it from the other version first and then attaches it to this one. For more information about versions and staging labels, see Concepts: Version.  The staging labels that you specify in the VersionStage parameter are added to the existing list of staging labels for the version.  You can move the AWSCURRENT staging label to this version by including it in this call.  Whenever you move AWSCURRENT, Secrets Manager automatically moves the label AWSPREVIOUS to the version that AWSCURRENT was removed from.  If this action results in the last label being removed from a version, then the version is considered to be 'deprecated' and can be deleted by Secrets Manager.
+   * Modifies the staging labels attached to a version of a secret. Secrets Manager uses staging labels to track a version as it progresses through the secret rotation process. Each staging label can be attached to only one version at a time. To add a staging label to a version when it is already attached to another version, Secrets Manager first removes it from the other version first and then attaches it to this one. For more information about versions and staging labels, see Concepts: Version.  The staging labels that you specify in the VersionStage parameter are added to the existing list of staging labels for the version.  You can move the AWSCURRENT staging label to this version by including it in this call.  Whenever you move AWSCURRENT, Secrets Manager automatically moves the label AWSPREVIOUS to the version that AWSCURRENT was removed from.  If this action results in the last label being removed from a version, then the version is considered to be 'deprecated' and can be deleted by Secrets Manager.  Required permissions:  secretsmanager:UpdateSecretVersionStage. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   updateSecretVersionStage(callback?: (err: AWSError, data: SecretsManager.Types.UpdateSecretVersionStageResponse) => void): Request<SecretsManager.Types.UpdateSecretVersionStageResponse, AWSError>;
   /**
-   * Validates that a resource policy does not grant a wide range of principals access to your secret. A resource-based policy is optional for secrets. The API performs three checks when validating the policy:   Sends a call to Zelkova, an automated reasoning engine, to ensure your resource policy does not allow broad access to your secret, for example policies that use a wildcard for the principal.   Checks for correct syntax in a policy.   Verifies the policy does not lock out a caller.  
+   * Validates that a resource policy does not grant a wide range of principals access to your secret. A resource-based policy is optional for secrets. The API performs three checks when validating the policy:   Sends a call to Zelkova, an automated reasoning engine, to ensure your resource policy does not allow broad access to your secret, for example policies that use a wildcard for the principal.   Checks for correct syntax in a policy.   Verifies the policy does not lock out a caller.    Required permissions:  secretsmanager:ValidateResourcePolicy. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   validateResourcePolicy(params: SecretsManager.Types.ValidateResourcePolicyRequest, callback?: (err: AWSError, data: SecretsManager.Types.ValidateResourcePolicyResponse) => void): Request<SecretsManager.Types.ValidateResourcePolicyResponse, AWSError>;
   /**
-   * Validates that a resource policy does not grant a wide range of principals access to your secret. A resource-based policy is optional for secrets. The API performs three checks when validating the policy:   Sends a call to Zelkova, an automated reasoning engine, to ensure your resource policy does not allow broad access to your secret, for example policies that use a wildcard for the principal.   Checks for correct syntax in a policy.   Verifies the policy does not lock out a caller.  
+   * Validates that a resource policy does not grant a wide range of principals access to your secret. A resource-based policy is optional for secrets. The API performs three checks when validating the policy:   Sends a call to Zelkova, an automated reasoning engine, to ensure your resource policy does not allow broad access to your secret, for example policies that use a wildcard for the principal.   Checks for correct syntax in a policy.   Verifies the policy does not lock out a caller.    Required permissions:  secretsmanager:ValidateResourcePolicy. For more information, see  IAM policy actions for Secrets Manager and Authentication and access control in Secrets Manager. 
    */
   validateResourcePolicy(callback?: (err: AWSError, data: SecretsManager.Types.ValidateResourcePolicyResponse) => void): Request<SecretsManager.Types.ValidateResourcePolicyResponse, AWSError>;
 }
@@ -393,6 +393,7 @@ declare namespace SecretsManager {
     ReplicationStatus?: ReplicationStatusListType;
   }
   export type DescriptionType = string;
+  export type DurationType = string;
   export type ErrorMessage = string;
   export type ExcludeCharactersType = string;
   export type ExcludeLowercaseType = boolean;
@@ -772,6 +773,10 @@ declare namespace SecretsManager {
      * A structure that defines the rotation configuration for this secret.
      */
     RotationRules?: RotationRulesType;
+    /**
+     * Specifies whether to rotate the secret immediately or wait until the next scheduled rotation window. The rotation schedule is defined in RotateSecretRequest$RotationRules. If you don't immediately rotate the secret, Secrets Manager tests the rotation configuration by running the  testSecret step of the Lambda rotation function. The test creates an AWSPENDING version of the secret and then removes it. If you don't specify this value, then by default, Secrets Manager rotates the secret immediately.
+     */
+    RotateImmediately?: BooleanType;
   }
   export interface RotateSecretResponse {
     /**
@@ -791,10 +796,19 @@ declare namespace SecretsManager {
   export type RotationLambdaARNType = string;
   export interface RotationRulesType {
     /**
-     * Specifies the number of days between automatic scheduled rotations of the secret. Secrets Manager schedules the next rotation when the previous one is complete. Secrets Manager schedules the date by adding the rotation interval (number of days) to the actual date of the last rotation. The service chooses the hour within that 24-hour date window randomly. The minute is also chosen somewhat randomly, but weighted towards the top of the hour and influenced by a variety of factors that help distribute load.
+     * The number of days between automatic scheduled rotations of the secret. You can use this value to check that your secret meets your compliance guidelines for how often secrets must be rotated. In DescribeSecret and ListSecrets, this value is calculated from the rotation schedule after every successful rotation. In RotateSecret, you can set the rotation schedule in RotationRules with AutomaticallyAfterDays or ScheduleExpression, but not both.
      */
     AutomaticallyAfterDays?: AutomaticallyRotateAfterDaysType;
+    /**
+     * The length of the rotation window in hours, for example 3h for a three hour window. Secrets Manager rotates your secret at any time during this window. The window must not go into the next UTC day. If you don't specify this value, the window automatically ends at the end of the UTC day. The window begins according to the ScheduleExpression. For more information, including examples, see Schedule expressions in Secrets Manager rotation.
+     */
+    Duration?: DurationType;
+    /**
+     * A cron() or rate() expression that defines the schedule for rotating your secret. Secrets Manager rotation schedules use UTC time zone.  Secrets Manager rate() expressions represent the interval in days that you want to rotate your secret, for example rate(10 days). If you use a rate() expression, the rotation window opens at midnight, and Secrets Manager rotates your secret any time that day after midnight. You can set a Duration to shorten the rotation window. You can use a cron() expression to create rotation schedules that are more detailed than a rotation interval. For more information, including examples, see Schedule expressions in Secrets Manager rotation. If you use a cron() expression, Secrets Manager rotates your secret any time during that day after the window opens. For example, cron(0 8 1 * ? *) represents a rotation window that occurs on the first day of every month beginning at 8:00 AM UTC. Secrets Manager rotates the secret any time that day after 8:00 AM. You can set a Duration to shorten the rotation window.
+     */
+    ScheduleExpression?: ScheduleExpressionType;
   }
+  export type ScheduleExpressionType = string;
   export type SecretARNType = string;
   export type SecretBinaryType = Buffer|Uint8Array|Blob|string;
   export type SecretIdType = string;
@@ -820,7 +834,7 @@ declare namespace SecretsManager {
      */
     RotationEnabled?: RotationEnabledType;
     /**
-     * The ARN of an Amazon Web Services Lambda function invoked by Secrets Manager to rotate and expire the secret either automatically per the schedule or manually by a call to RotateSecret.
+     * The ARN of an Amazon Web Services Lambda function invoked by Secrets Manager to rotate and expire the secret either automatically per the schedule or manually by a call to  RotateSecret .
      */
     RotationLambdaARN?: RotationLambdaARNType;
     /**
@@ -840,11 +854,11 @@ declare namespace SecretsManager {
      */
     LastAccessedDate?: LastAccessedDateType;
     /**
-     * The date and time the deletion of the secret occurred. Not present on active secrets. The secret can be recovered until the number of days in the recovery window has passed, as specified in the RecoveryWindowInDays parameter of the DeleteSecret operation.
+     * The date and time the deletion of the secret occurred. Not present on active secrets. The secret can be recovered until the number of days in the recovery window has passed, as specified in the RecoveryWindowInDays parameter of the  DeleteSecret  operation.
      */
     DeletedDate?: DeletedDateType;
     /**
-     * The list of user-defined tags associated with the secret. To add tags to a secret, use TagResource. To remove tags, use UntagResource.
+     * The list of user-defined tags associated with the secret. To add tags to a secret, use  TagResource . To remove tags, use  UntagResource .
      */
     Tags?: TagListType;
     /**

package/node_modules/aws-sdk/clients/securityhub.d.ts

@@ -7209,6 +7209,10 @@ declare namespace SecurityHub {
      * In a BatchImportFindings request, finding providers use FindingProviderFields to provide and update their own values for confidence, criticality, related findings, severity, and types.
      */
     FindingProviderFields?: FindingProviderFields;
+    /**
+     * Indicates whether the finding is a sample finding.
+     */
+    Sample?: Boolean;
   }
   export interface AwsSecurityFindingFilters {
     /**
@@ -7587,6 +7591,10 @@ declare namespace SecurityHub {
      * One or more finding types that the finding provider assigned to the finding. Uses the format of namespace/category/classifier that classify a finding. Valid namespace values are: Software and Configuration Checks | TTPs | Effects | Unusual Behaviors | Sensitive Data Identifications
      */
     FindingProviderFieldsTypes?: StringFilterList;
+    /**
+     * Indicates whether or not sample findings are included in the filter results.
+     */
+    Sample?: BooleanFilterList;
   }
   export interface AwsSecurityFindingIdentifier {
     /**
@@ -7984,6 +7992,13 @@ declare namespace SecurityHub {
   }
   export type BatchUpdateFindingsUnprocessedFindingsList = BatchUpdateFindingsUnprocessedFinding[];
   export type Boolean = boolean;
+  export interface BooleanFilter {
+    /**
+     * The value of the boolean.
+     */
+    Value?: Boolean;
+  }
+  export type BooleanFilterList = BooleanFilter[];
   export type CategoryList = NonEmptyString[];
   export interface Cell {
     /**

package/node_modules/aws-sdk/clients/ssmincidents.d.ts

@@ -752,7 +752,7 @@ declare namespace SSMIncidents {
      */
     value: ItemValue;
   }
-  export type ItemType = "ANALYSIS"|"INCIDENT"|"METRIC"|"PARENT"|"ATTACHMENT"|"OTHER"|string;
+  export type ItemType = "ANALYSIS"|"INCIDENT"|"METRIC"|"PARENT"|"ATTACHMENT"|"OTHER"|"AUTOMATION"|string;
   export interface ItemValue {
     /**
      * The Amazon Resource Name (ARN) of the related item, if the related item is an Amazon resource.

package/node_modules/aws-sdk/clients/synthetics.d.ts

@@ -28,19 +28,19 @@ declare class Synthetics extends Service {
    */
   deleteCanary(callback?: (err: AWSError, data: Synthetics.Types.DeleteCanaryResponse) => void): Request<Synthetics.Types.DeleteCanaryResponse, AWSError>;
   /**
-   * This operation returns a list of the canaries in your account, along with full details about each canary. This operation does not have resource-level authorization, so if a user is able to use DescribeCanaries, the user can see all of the canaries in the account. A deny policy can only be used to restrict access to all canaries. It cannot be used on specific resources. 
+   * This operation returns a list of the canaries in your account, along with full details about each canary. This operation supports resource-level authorization using an IAM policy and the Names parameter. If you specify the Names parameter, the operation is successful only if you have authorization to view all the canaries that you specify in your request. If you do not have permission to view any of the canaries, the request fails with a 403 response. You are required to use the Names parameter if you are logged on to a user or role that has an IAM policy that restricts which canaries that you are allowed to view. For more information, see  Limiting a user to viewing specific canaries.
    */
   describeCanaries(params: Synthetics.Types.DescribeCanariesRequest, callback?: (err: AWSError, data: Synthetics.Types.DescribeCanariesResponse) => void): Request<Synthetics.Types.DescribeCanariesResponse, AWSError>;
   /**
-   * This operation returns a list of the canaries in your account, along with full details about each canary. This operation does not have resource-level authorization, so if a user is able to use DescribeCanaries, the user can see all of the canaries in the account. A deny policy can only be used to restrict access to all canaries. It cannot be used on specific resources. 
+   * This operation returns a list of the canaries in your account, along with full details about each canary. This operation supports resource-level authorization using an IAM policy and the Names parameter. If you specify the Names parameter, the operation is successful only if you have authorization to view all the canaries that you specify in your request. If you do not have permission to view any of the canaries, the request fails with a 403 response. You are required to use the Names parameter if you are logged on to a user or role that has an IAM policy that restricts which canaries that you are allowed to view. For more information, see  Limiting a user to viewing specific canaries.
    */
   describeCanaries(callback?: (err: AWSError, data: Synthetics.Types.DescribeCanariesResponse) => void): Request<Synthetics.Types.DescribeCanariesResponse, AWSError>;
   /**
-   * Use this operation to see information from the most recent run of each canary that you have created.
+   * Use this operation to see information from the most recent run of each canary that you have created. This operation supports resource-level authorization using an IAM policy and the Names parameter. If you specify the Names parameter, the operation is successful only if you have authorization to view all the canaries that you specify in your request. If you do not have permission to view any of the canaries, the request fails with a 403 response. You are required to use the Names parameter if you are logged on to a user or role that has an IAM policy that restricts which canaries that you are allowed to view. For more information, see  Limiting a user to viewing specific canaries.
    */
   describeCanariesLastRun(params: Synthetics.Types.DescribeCanariesLastRunRequest, callback?: (err: AWSError, data: Synthetics.Types.DescribeCanariesLastRunResponse) => void): Request<Synthetics.Types.DescribeCanariesLastRunResponse, AWSError>;
   /**
-   * Use this operation to see information from the most recent run of each canary that you have created.
+   * Use this operation to see information from the most recent run of each canary that you have created. This operation supports resource-level authorization using an IAM policy and the Names parameter. If you specify the Names parameter, the operation is successful only if you have authorization to view all the canaries that you specify in your request. If you do not have permission to view any of the canaries, the request fails with a 403 response. You are required to use the Names parameter if you are logged on to a user or role that has an IAM policy that restricts which canaries that you are allowed to view. For more information, see  Limiting a user to viewing specific canaries.
    */
   describeCanariesLastRun(callback?: (err: AWSError, data: Synthetics.Types.DescribeCanariesLastRunResponse) => void): Request<Synthetics.Types.DescribeCanariesLastRunResponse, AWSError>;
   /**
@@ -221,7 +221,7 @@ declare namespace Synthetics {
      */
     S3Version?: String;
     /**
-     * If you input your canary script directly into the canary instead of referring to an S3 location, the value of this parameter is the base64-encoded contents of the .zip file that contains the script. It must be smaller than 256 Kb.
+     * If you input your canary script directly into the canary instead of referring to an S3 location, the value of this parameter is the base64-encoded contents of the .zip file that contains the script. It must be smaller than 225 Kb. For large canary scripts, we recommend that you use an S3 location instead of inputting it directly with this parameter.
      */
     ZipFile?: _Blob;
     /**
@@ -449,6 +449,7 @@ declare namespace Synthetics {
   }
   export interface DeleteCanaryResponse {
   }
+  export type DescribeCanariesLastRunNameFilter = CanaryName[];
   export interface DescribeCanariesLastRunRequest {
     /**
      * A token that indicates that there is more data available. You can use this token in a subsequent DescribeCanaries operation to retrieve the next set of results.
@@ -458,6 +459,10 @@ declare namespace Synthetics {
      * Specify this parameter to limit how many runs are returned each time you use the DescribeLastRun operation. If you omit this parameter, the default of 100 is used.
      */
     MaxResults?: MaxSize100;
+    /**
+     * Use this parameter to return only canaries that match the names that you specify here. You can specify as many as five canary names. If you specify this parameter, the operation is successful only if you have authorization to view all the canaries that you specify in your request. If you do not have permission to view any of the canaries, the request fails with a 403 response. You are required to use the Names parameter if you are logged on to a user or role that has an IAM policy that restricts which canaries that you are allowed to view. For more information, see  Limiting a user to viewing specific canaries.
+     */
+    Names?: DescribeCanariesLastRunNameFilter;
   }
   export interface DescribeCanariesLastRunResponse {
     /**
@@ -469,6 +474,7 @@ declare namespace Synthetics {
      */
     NextToken?: Token;
   }
+  export type DescribeCanariesNameFilter = CanaryName[];
   export interface DescribeCanariesRequest {
     /**
      * A token that indicates that there is more data available. You can use this token in a subsequent operation to retrieve the next set of results.
@@ -478,6 +484,10 @@ declare namespace Synthetics {
      * Specify this parameter to limit how many canaries are returned each time you use the DescribeCanaries operation. If you omit this parameter, the default of 100 is used.
      */
     MaxResults?: MaxCanaryResults;
+    /**
+     * Use this parameter to return only canaries that match the names that you specify here. You can specify as many as five canary names. If you specify this parameter, the operation is successful only if you have authorization to view all the canaries that you specify in your request. If you do not have permission to view any of the canaries, the request fails with a 403 response. You are required to use this parameter if you are logged on to a user or role that has an IAM policy that restricts which canaries that you are allowed to view. For more information, see  Limiting a user to viewing specific canaries.
+     */
+    Names?: DescribeCanariesNameFilter;
   }
   export interface DescribeCanariesResponse {
     /**

package/node_modules/aws-sdk/clients/transcribeservice.d.ts

@@ -503,6 +503,10 @@ declare namespace TranscribeService {
      * The output transcript file stored in either the default S3 bucket or in a bucket you specify. When you choose redacted Amazon Transcribe outputs only the redacted transcript. When you choose redacted_and_unredacted Amazon Transcribe outputs both the redacted and unredacted transcripts.
      */
     RedactionOutput: RedactionOutput;
+    /**
+     * The types of personally identifiable information (PII) you want to redact in your transcript.
+     */
+    PiiEntityTypes?: PiiEntityTypes;
   }
   export interface CreateCallAnalyticsCategoryRequest {
     /**
@@ -1433,6 +1437,8 @@ declare namespace TranscribeService {
   export type Percentage = number;
   export type Phrase = string;
   export type Phrases = Phrase[];
+  export type PiiEntityType = "BANK_ACCOUNT_NUMBER"|"BANK_ROUTING"|"CREDIT_DEBIT_NUMBER"|"CREDIT_DEBIT_CVV"|"CREDIT_DEBIT_EXPIRY"|"PIN"|"EMAIL"|"ADDRESS"|"NAME"|"PHONE"|"SSN"|"ALL"|string;
+  export type PiiEntityTypes = PiiEntityType[];
   export type RedactionOutput = "redacted"|"redacted_and_unredacted"|string;
   export type RedactionType = "PII"|string;
   export interface RelativeTimeRange {