@pgarbe/cdk-ecr-sync 0.5.18 → 0.5.22

package/node_modules/aws-sdk/clients/s3.d.ts

@@ -26,35 +26,35 @@ declare class S3 extends S3Customizations {
    */
   abortMultipartUpload(callback?: (err: AWSError, data: S3.Types.AbortMultipartUploadOutput) => void): Request<S3.Types.AbortMultipartUploadOutput, AWSError>;
   /**
-   * Completes a multipart upload by assembling previously uploaded parts. You first initiate the multipart upload and then upload all parts using the UploadPart operation. After successfully uploading all relevant parts of an upload, you call this action to complete the upload. Upon receiving this request, Amazon S3 concatenates all the parts in ascending order by part number to create a new object. In the Complete Multipart Upload request, you must provide the parts list. You must ensure that the parts list is complete. This action concatenates the parts that you provide in the list. For each part in the list, you must provide the part number and the ETag value, returned after that part was uploaded. Processing of a Complete Multipart Upload request could take several minutes to complete. After Amazon S3 begins processing the request, it sends an HTTP response header that specifies a 200 OK response. While processing is in progress, Amazon S3 periodically sends white space characters to keep the connection from timing out. Because a request could fail after the initial 200 OK response has been sent, it is important that you check the response body to determine whether the request succeeded. Note that if CompleteMultipartUpload fails, applications should be prepared to retry the failed requests. For more information, see Amazon S3 Error Best Practices. For more information about multipart uploads, see Uploading Objects Using Multipart Upload. For information about permissions required to use the multipart upload API, see Multipart Upload and Permissions.  CompleteMultipartUpload has the following special errors:   Error code: EntityTooSmall    Description: Your proposed upload is smaller than the minimum allowed object size. Each part must be at least 5 MB in size, except the last part.   400 Bad Request     Error code: InvalidPart    Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified entity tag might not have matched the part's entity tag.   400 Bad Request     Error code: InvalidPartOrder    Description: The list of parts was not in ascending order. The parts list must be specified in order by part number.   400 Bad Request     Error code: NoSuchUpload    Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.   404 Not Found     The following operations are related to CompleteMultipartUpload:    CreateMultipartUpload     UploadPart     AbortMultipartUpload     ListParts     ListMultipartUploads   
+   * Completes a multipart upload by assembling previously uploaded parts. You first initiate the multipart upload and then upload all parts using the UploadPart operation. After successfully uploading all relevant parts of an upload, you call this action to complete the upload. Upon receiving this request, Amazon S3 concatenates all the parts in ascending order by part number to create a new object. In the Complete Multipart Upload request, you must provide the parts list. You must ensure that the parts list is complete. This action concatenates the parts that you provide in the list. For each part in the list, you must provide the part number and the ETag value, returned after that part was uploaded. Processing of a Complete Multipart Upload request could take several minutes to complete. After Amazon S3 begins processing the request, it sends an HTTP response header that specifies a 200 OK response. While processing is in progress, Amazon S3 periodically sends white space characters to keep the connection from timing out. Because a request could fail after the initial 200 OK response has been sent, it is important that you check the response body to determine whether the request succeeded. Note that if CompleteMultipartUpload fails, applications should be prepared to retry the failed requests. For more information, see Amazon S3 Error Best Practices.  You cannot use Content-Type: application/x-www-form-urlencoded with Complete Multipart Upload requests. Also, if you do not provide a Content-Type header, CompleteMultipartUpload returns a 200 OK response.  For more information about multipart uploads, see Uploading Objects Using Multipart Upload. For information about permissions required to use the multipart upload API, see Multipart Upload and Permissions.  CompleteMultipartUpload has the following special errors:   Error code: EntityTooSmall    Description: Your proposed upload is smaller than the minimum allowed object size. Each part must be at least 5 MB in size, except the last part.   400 Bad Request     Error code: InvalidPart    Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified entity tag might not have matched the part's entity tag.   400 Bad Request     Error code: InvalidPartOrder    Description: The list of parts was not in ascending order. The parts list must be specified in order by part number.   400 Bad Request     Error code: NoSuchUpload    Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.   404 Not Found     The following operations are related to CompleteMultipartUpload:    CreateMultipartUpload     UploadPart     AbortMultipartUpload     ListParts     ListMultipartUploads   
    */
   completeMultipartUpload(params: S3.Types.CompleteMultipartUploadRequest, callback?: (err: AWSError, data: S3.Types.CompleteMultipartUploadOutput) => void): Request<S3.Types.CompleteMultipartUploadOutput, AWSError>;
   /**
-   * Completes a multipart upload by assembling previously uploaded parts. You first initiate the multipart upload and then upload all parts using the UploadPart operation. After successfully uploading all relevant parts of an upload, you call this action to complete the upload. Upon receiving this request, Amazon S3 concatenates all the parts in ascending order by part number to create a new object. In the Complete Multipart Upload request, you must provide the parts list. You must ensure that the parts list is complete. This action concatenates the parts that you provide in the list. For each part in the list, you must provide the part number and the ETag value, returned after that part was uploaded. Processing of a Complete Multipart Upload request could take several minutes to complete. After Amazon S3 begins processing the request, it sends an HTTP response header that specifies a 200 OK response. While processing is in progress, Amazon S3 periodically sends white space characters to keep the connection from timing out. Because a request could fail after the initial 200 OK response has been sent, it is important that you check the response body to determine whether the request succeeded. Note that if CompleteMultipartUpload fails, applications should be prepared to retry the failed requests. For more information, see Amazon S3 Error Best Practices. For more information about multipart uploads, see Uploading Objects Using Multipart Upload. For information about permissions required to use the multipart upload API, see Multipart Upload and Permissions.  CompleteMultipartUpload has the following special errors:   Error code: EntityTooSmall    Description: Your proposed upload is smaller than the minimum allowed object size. Each part must be at least 5 MB in size, except the last part.   400 Bad Request     Error code: InvalidPart    Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified entity tag might not have matched the part's entity tag.   400 Bad Request     Error code: InvalidPartOrder    Description: The list of parts was not in ascending order. The parts list must be specified in order by part number.   400 Bad Request     Error code: NoSuchUpload    Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.   404 Not Found     The following operations are related to CompleteMultipartUpload:    CreateMultipartUpload     UploadPart     AbortMultipartUpload     ListParts     ListMultipartUploads   
+   * Completes a multipart upload by assembling previously uploaded parts. You first initiate the multipart upload and then upload all parts using the UploadPart operation. After successfully uploading all relevant parts of an upload, you call this action to complete the upload. Upon receiving this request, Amazon S3 concatenates all the parts in ascending order by part number to create a new object. In the Complete Multipart Upload request, you must provide the parts list. You must ensure that the parts list is complete. This action concatenates the parts that you provide in the list. For each part in the list, you must provide the part number and the ETag value, returned after that part was uploaded. Processing of a Complete Multipart Upload request could take several minutes to complete. After Amazon S3 begins processing the request, it sends an HTTP response header that specifies a 200 OK response. While processing is in progress, Amazon S3 periodically sends white space characters to keep the connection from timing out. Because a request could fail after the initial 200 OK response has been sent, it is important that you check the response body to determine whether the request succeeded. Note that if CompleteMultipartUpload fails, applications should be prepared to retry the failed requests. For more information, see Amazon S3 Error Best Practices.  You cannot use Content-Type: application/x-www-form-urlencoded with Complete Multipart Upload requests. Also, if you do not provide a Content-Type header, CompleteMultipartUpload returns a 200 OK response.  For more information about multipart uploads, see Uploading Objects Using Multipart Upload. For information about permissions required to use the multipart upload API, see Multipart Upload and Permissions.  CompleteMultipartUpload has the following special errors:   Error code: EntityTooSmall    Description: Your proposed upload is smaller than the minimum allowed object size. Each part must be at least 5 MB in size, except the last part.   400 Bad Request     Error code: InvalidPart    Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified entity tag might not have matched the part's entity tag.   400 Bad Request     Error code: InvalidPartOrder    Description: The list of parts was not in ascending order. The parts list must be specified in order by part number.   400 Bad Request     Error code: NoSuchUpload    Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.   404 Not Found     The following operations are related to CompleteMultipartUpload:    CreateMultipartUpload     UploadPart     AbortMultipartUpload     ListParts     ListMultipartUploads   
    */
   completeMultipartUpload(callback?: (err: AWSError, data: S3.Types.CompleteMultipartUploadOutput) => void): Request<S3.Types.CompleteMultipartUploadOutput, AWSError>;
   /**
-   * Creates a copy of an object that is already stored in Amazon S3.  You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy API. For more information, see Copy Object Using the REST Multipart Upload API.  All copy requests must be authenticated. Additionally, you must have read access to the source object and write access to the destination bucket. For more information, see REST Authentication. Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. If the error occurs before the copy action starts, you receive a standard Amazon S3 error. If the error occurs during the copy operation, the error response is embedded in the 200 OK response. This means that a 200 OK response can contain either a success or an error. Design your application to parse the contents of the response and handle it appropriately. If the copy is successful, you receive a response with information about the copied object.  If the request is an HTTP 1.1 request, the response is chunk encoded. If it were not, it would not contain the content-length, and you would need to read the entire body.  The copy request charge is based on the storage class and Region that you specify for the destination object. For pricing information, see Amazon S3 pricing.  Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.   Metadata  When copying an object, you can preserve all metadata (default) or specify new metadata. However, the ACL is not preserved and is set to private for the user making the request. To override the default ACL setting, specify a new ACL when generating a copy request. For more information, see Using ACLs.  To specify whether you want the object metadata copied from the source object or replaced with metadata provided in the request, you can optionally add the x-amz-metadata-directive header. When you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Specifying Conditions in a Policy in the Amazon S3 User Guide. For a complete list of Amazon S3-specific condition keys, see Actions, Resources, and Condition Keys for Amazon S3.   x-amz-copy-source-if Headers  To only copy an object under certain conditions, such as whether the Etag matches or whether the object was modified before or after a specified date, use the following request parameters:    x-amz-copy-source-if-match     x-amz-copy-source-if-none-match     x-amz-copy-source-if-unmodified-since     x-amz-copy-source-if-modified-since     If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:    x-amz-copy-source-if-match condition evaluates to true    x-amz-copy-source-if-unmodified-since condition evaluates to false   If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:    x-amz-copy-source-if-none-match condition evaluates to false    x-amz-copy-source-if-modified-since condition evaluates to true    All headers with the x-amz- prefix, including x-amz-copy-source, must be signed.   Server-side encryption  When you perform a CopyObject operation, you can optionally use the appropriate encryption-related headers to encrypt the object using server-side encryption with Amazon Web Services managed encryption keys (SSE-S3 or SSE-KMS) or a customer-provided encryption key. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. For more information about server-side encryption, see Using Server-Side Encryption. If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  Access Control List (ACL)-Specific Request Headers  When copying an object, you can optionally use headers to grant ACL-based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.   Storage Class Options  You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 using the StorageClass parameter. For more information, see Storage Classes in the Amazon S3 User Guide.  Versioning  By default, x-amz-copy-source identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId subresource. If you enable versioning on the target bucket, Amazon S3 generates a unique version ID for the object being copied. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response. If you do not enable versioning or suspend it on the target bucket, the version ID that Amazon S3 generates is always null. If the source object's storage class is GLACIER, you must restore a copy of this object before you can use it as a source object for the copy operation. For more information, see RestoreObject. The following operations are related to CopyObject:    PutObject     GetObject    For more information, see Copying Objects.
+   * Creates a copy of an object that is already stored in Amazon S3.  You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy API. For more information, see Copy Object Using the REST Multipart Upload API.  All copy requests must be authenticated. Additionally, you must have read access to the source object and write access to the destination bucket. For more information, see REST Authentication. Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. If the error occurs before the copy action starts, you receive a standard Amazon S3 error. If the error occurs during the copy operation, the error response is embedded in the 200 OK response. This means that a 200 OK response can contain either a success or an error. Design your application to parse the contents of the response and handle it appropriately. If the copy is successful, you receive a response with information about the copied object.  If the request is an HTTP 1.1 request, the response is chunk encoded. If it were not, it would not contain the content-length, and you would need to read the entire body.  The copy request charge is based on the storage class and Region that you specify for the destination object. For pricing information, see Amazon S3 pricing.  Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.   Metadata  When copying an object, you can preserve all metadata (default) or specify new metadata. However, the ACL is not preserved and is set to private for the user making the request. To override the default ACL setting, specify a new ACL when generating a copy request. For more information, see Using ACLs.  To specify whether you want the object metadata copied from the source object or replaced with metadata provided in the request, you can optionally add the x-amz-metadata-directive header. When you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Specifying Conditions in a Policy in the Amazon S3 User Guide. For a complete list of Amazon S3-specific condition keys, see Actions, Resources, and Condition Keys for Amazon S3.   x-amz-copy-source-if Headers  To only copy an object under certain conditions, such as whether the Etag matches or whether the object was modified before or after a specified date, use the following request parameters:    x-amz-copy-source-if-match     x-amz-copy-source-if-none-match     x-amz-copy-source-if-unmodified-since     x-amz-copy-source-if-modified-since     If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:    x-amz-copy-source-if-match condition evaluates to true    x-amz-copy-source-if-unmodified-since condition evaluates to false   If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:    x-amz-copy-source-if-none-match condition evaluates to false    x-amz-copy-source-if-modified-since condition evaluates to true    All headers with the x-amz- prefix, including x-amz-copy-source, must be signed.   Server-side encryption  When you perform a CopyObject operation, you can optionally use the appropriate encryption-related headers to encrypt the object using server-side encryption with Amazon Web Services managed encryption keys (SSE-S3 or SSE-KMS) or a customer-provided encryption key. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. For more information about server-side encryption, see Using Server-Side Encryption. If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  Access Control List (ACL)-Specific Request Headers  When copying an object, you can optionally use headers to grant ACL-based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.  If the bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see  Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.   Storage Class Options  You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 using the StorageClass parameter. For more information, see Storage Classes in the Amazon S3 User Guide.  Versioning  By default, x-amz-copy-source identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId subresource. If you enable versioning on the target bucket, Amazon S3 generates a unique version ID for the object being copied. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response. If you do not enable versioning or suspend it on the target bucket, the version ID that Amazon S3 generates is always null. If the source object's storage class is GLACIER, you must restore a copy of this object before you can use it as a source object for the copy operation. For more information, see RestoreObject. The following operations are related to CopyObject:    PutObject     GetObject    For more information, see Copying Objects.
    */
   copyObject(params: S3.Types.CopyObjectRequest, callback?: (err: AWSError, data: S3.Types.CopyObjectOutput) => void): Request<S3.Types.CopyObjectOutput, AWSError>;
   /**
-   * Creates a copy of an object that is already stored in Amazon S3.  You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy API. For more information, see Copy Object Using the REST Multipart Upload API.  All copy requests must be authenticated. Additionally, you must have read access to the source object and write access to the destination bucket. For more information, see REST Authentication. Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. If the error occurs before the copy action starts, you receive a standard Amazon S3 error. If the error occurs during the copy operation, the error response is embedded in the 200 OK response. This means that a 200 OK response can contain either a success or an error. Design your application to parse the contents of the response and handle it appropriately. If the copy is successful, you receive a response with information about the copied object.  If the request is an HTTP 1.1 request, the response is chunk encoded. If it were not, it would not contain the content-length, and you would need to read the entire body.  The copy request charge is based on the storage class and Region that you specify for the destination object. For pricing information, see Amazon S3 pricing.  Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.   Metadata  When copying an object, you can preserve all metadata (default) or specify new metadata. However, the ACL is not preserved and is set to private for the user making the request. To override the default ACL setting, specify a new ACL when generating a copy request. For more information, see Using ACLs.  To specify whether you want the object metadata copied from the source object or replaced with metadata provided in the request, you can optionally add the x-amz-metadata-directive header. When you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Specifying Conditions in a Policy in the Amazon S3 User Guide. For a complete list of Amazon S3-specific condition keys, see Actions, Resources, and Condition Keys for Amazon S3.   x-amz-copy-source-if Headers  To only copy an object under certain conditions, such as whether the Etag matches or whether the object was modified before or after a specified date, use the following request parameters:    x-amz-copy-source-if-match     x-amz-copy-source-if-none-match     x-amz-copy-source-if-unmodified-since     x-amz-copy-source-if-modified-since     If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:    x-amz-copy-source-if-match condition evaluates to true    x-amz-copy-source-if-unmodified-since condition evaluates to false   If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:    x-amz-copy-source-if-none-match condition evaluates to false    x-amz-copy-source-if-modified-since condition evaluates to true    All headers with the x-amz- prefix, including x-amz-copy-source, must be signed.   Server-side encryption  When you perform a CopyObject operation, you can optionally use the appropriate encryption-related headers to encrypt the object using server-side encryption with Amazon Web Services managed encryption keys (SSE-S3 or SSE-KMS) or a customer-provided encryption key. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. For more information about server-side encryption, see Using Server-Side Encryption. If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  Access Control List (ACL)-Specific Request Headers  When copying an object, you can optionally use headers to grant ACL-based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.   Storage Class Options  You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 using the StorageClass parameter. For more information, see Storage Classes in the Amazon S3 User Guide.  Versioning  By default, x-amz-copy-source identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId subresource. If you enable versioning on the target bucket, Amazon S3 generates a unique version ID for the object being copied. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response. If you do not enable versioning or suspend it on the target bucket, the version ID that Amazon S3 generates is always null. If the source object's storage class is GLACIER, you must restore a copy of this object before you can use it as a source object for the copy operation. For more information, see RestoreObject. The following operations are related to CopyObject:    PutObject     GetObject    For more information, see Copying Objects.
+   * Creates a copy of an object that is already stored in Amazon S3.  You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy API. For more information, see Copy Object Using the REST Multipart Upload API.  All copy requests must be authenticated. Additionally, you must have read access to the source object and write access to the destination bucket. For more information, see REST Authentication. Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. If the error occurs before the copy action starts, you receive a standard Amazon S3 error. If the error occurs during the copy operation, the error response is embedded in the 200 OK response. This means that a 200 OK response can contain either a success or an error. Design your application to parse the contents of the response and handle it appropriately. If the copy is successful, you receive a response with information about the copied object.  If the request is an HTTP 1.1 request, the response is chunk encoded. If it were not, it would not contain the content-length, and you would need to read the entire body.  The copy request charge is based on the storage class and Region that you specify for the destination object. For pricing information, see Amazon S3 pricing.  Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.   Metadata  When copying an object, you can preserve all metadata (default) or specify new metadata. However, the ACL is not preserved and is set to private for the user making the request. To override the default ACL setting, specify a new ACL when generating a copy request. For more information, see Using ACLs.  To specify whether you want the object metadata copied from the source object or replaced with metadata provided in the request, you can optionally add the x-amz-metadata-directive header. When you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Specifying Conditions in a Policy in the Amazon S3 User Guide. For a complete list of Amazon S3-specific condition keys, see Actions, Resources, and Condition Keys for Amazon S3.   x-amz-copy-source-if Headers  To only copy an object under certain conditions, such as whether the Etag matches or whether the object was modified before or after a specified date, use the following request parameters:    x-amz-copy-source-if-match     x-amz-copy-source-if-none-match     x-amz-copy-source-if-unmodified-since     x-amz-copy-source-if-modified-since     If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:    x-amz-copy-source-if-match condition evaluates to true    x-amz-copy-source-if-unmodified-since condition evaluates to false   If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:    x-amz-copy-source-if-none-match condition evaluates to false    x-amz-copy-source-if-modified-since condition evaluates to true    All headers with the x-amz- prefix, including x-amz-copy-source, must be signed.   Server-side encryption  When you perform a CopyObject operation, you can optionally use the appropriate encryption-related headers to encrypt the object using server-side encryption with Amazon Web Services managed encryption keys (SSE-S3 or SSE-KMS) or a customer-provided encryption key. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. For more information about server-side encryption, see Using Server-Side Encryption. If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  Access Control List (ACL)-Specific Request Headers  When copying an object, you can optionally use headers to grant ACL-based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.  If the bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see  Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.   Storage Class Options  You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 using the StorageClass parameter. For more information, see Storage Classes in the Amazon S3 User Guide.  Versioning  By default, x-amz-copy-source identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId subresource. If you enable versioning on the target bucket, Amazon S3 generates a unique version ID for the object being copied. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response. If you do not enable versioning or suspend it on the target bucket, the version ID that Amazon S3 generates is always null. If the source object's storage class is GLACIER, you must restore a copy of this object before you can use it as a source object for the copy operation. For more information, see RestoreObject. The following operations are related to CopyObject:    PutObject     GetObject    For more information, see Copying Objects.
    */
   copyObject(callback?: (err: AWSError, data: S3.Types.CopyObjectOutput) => void): Request<S3.Types.CopyObjectOutput, AWSError>;
   /**
-   * Creates a new S3 bucket. To create a bucket, you must register with Amazon S3 and have a valid Amazon Web Services Access Key ID to authenticate requests. Anonymous requests are never allowed to create buckets. By creating the bucket, you become the bucket owner. Not every string is an acceptable bucket name. For information about bucket naming restrictions, see Bucket naming rules. If you want to create an Amazon S3 on Outposts bucket, see Create Bucket.  By default, the bucket is created in the US East (N. Virginia) Region. You can optionally specify a Region in the request body. You might choose a Region to optimize latency, minimize costs, or address regulatory requirements. For example, if you reside in Europe, you will probably find it advantageous to create buckets in the Europe (Ireland) Region. For more information, see Accessing a bucket.  If you send your create bucket request to the s3.amazonaws.com endpoint, the request goes to the us-east-1 Region. Accordingly, the signature calculations in Signature Version 4 must use us-east-1 as the Region, even if the location constraint in the request specifies another Region where the bucket is to be created. If you create a bucket in a Region other than US East (N. Virginia), your application must be able to handle 307 redirect. For more information, see Virtual hosting of buckets.  When creating a bucket using this operation, you can optionally specify the accounts or groups that should be granted specific permissions on the bucket. There are two ways to grant the appropriate permissions using the request headers.   Specify a canned ACL using the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL.   Specify access permissions explicitly using the x-amz-grant-read, x-amz-grant-write, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. These headers map to the set of permissions Amazon S3 supports in an ACL. For more information, see Access control list (ACL) overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:  x-amz-grant-read: id="11112222333", id="444455556666"      You can use either a canned ACL or specify access permissions explicitly. You cannot do both.   Permissions  If your CreateBucket request specifies ACL permissions and the ACL is public-read, public-read-write, authenticated-read, or if you specify access permissions explicitly through any other ACL, both s3:CreateBucket and s3:PutBucketAcl permissions are needed. If the ACL the CreateBucket request is private, only s3:CreateBucket permission is needed.  If ObjectLockEnabledForBucket is set to true in your CreateBucket request, s3:PutBucketObjectLockConfiguration and s3:PutBucketVersioning permissions are required. The following operations are related to CreateBucket:    PutObject     DeleteBucket   
+   * Creates a new S3 bucket. To create a bucket, you must register with Amazon S3 and have a valid Amazon Web Services Access Key ID to authenticate requests. Anonymous requests are never allowed to create buckets. By creating the bucket, you become the bucket owner. Not every string is an acceptable bucket name. For information about bucket naming restrictions, see Bucket naming rules. If you want to create an Amazon S3 on Outposts bucket, see Create Bucket.  By default, the bucket is created in the US East (N. Virginia) Region. You can optionally specify a Region in the request body. You might choose a Region to optimize latency, minimize costs, or address regulatory requirements. For example, if you reside in Europe, you will probably find it advantageous to create buckets in the Europe (Ireland) Region. For more information, see Accessing a bucket.  If you send your create bucket request to the s3.amazonaws.com endpoint, the request goes to the us-east-1 Region. Accordingly, the signature calculations in Signature Version 4 must use us-east-1 as the Region, even if the location constraint in the request specifies another Region where the bucket is to be created. If you create a bucket in a Region other than US East (N. Virginia), your application must be able to handle 307 redirect. For more information, see Virtual hosting of buckets.   Access control lists (ACLs)  When creating a bucket using this operation, you can optionally configure the bucket ACL to specify the accounts or groups that should be granted specific permissions on the bucket.  If your CreateBucket request includes the BucketOwnerEnforced value for the x-amz-object-ownership header, your request can either not specify an ACL or specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent ACL expressed in the XML format. For more information, see Controlling object ownership in the Amazon S3 User Guide.  There are two ways to grant the appropriate permissions using the request headers.   Specify a canned ACL using the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL.   Specify access permissions explicitly using the x-amz-grant-read, x-amz-grant-write, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. These headers map to the set of permissions Amazon S3 supports in an ACL. For more information, see Access control list (ACL) overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:  x-amz-grant-read: id="11112222333", id="444455556666"      You can use either a canned ACL or specify access permissions explicitly. You cannot do both.   Permissions  In addition to s3:CreateBucket, the following permissions are required when your CreateBucket includes specific headers:    ACLs - If your CreateBucket request specifies ACL permissions and the ACL is public-read, public-read-write, authenticated-read, or if you specify access permissions explicitly through any other ACL, both s3:CreateBucket and s3:PutBucketAcl permissions are needed. If the ACL the CreateBucket request is private or doesn't specify any ACLs, only s3:CreateBucket permission is needed.     Object Lock - If ObjectLockEnabledForBucket is set to true in your CreateBucket request, s3:PutBucketObjectLockConfiguration and s3:PutBucketVersioning permissions are required.    S3 Object Ownership - If your CreateBucket request includes the the x-amz-object-ownership header, s3:PutBucketOwnershipControls permission is required.   The following operations are related to CreateBucket:    PutObject     DeleteBucket   
    */
   createBucket(params: S3.Types.CreateBucketRequest, callback?: (err: AWSError, data: S3.Types.CreateBucketOutput) => void): Request<S3.Types.CreateBucketOutput, AWSError>;
   /**
-   * Creates a new S3 bucket. To create a bucket, you must register with Amazon S3 and have a valid Amazon Web Services Access Key ID to authenticate requests. Anonymous requests are never allowed to create buckets. By creating the bucket, you become the bucket owner. Not every string is an acceptable bucket name. For information about bucket naming restrictions, see Bucket naming rules. If you want to create an Amazon S3 on Outposts bucket, see Create Bucket.  By default, the bucket is created in the US East (N. Virginia) Region. You can optionally specify a Region in the request body. You might choose a Region to optimize latency, minimize costs, or address regulatory requirements. For example, if you reside in Europe, you will probably find it advantageous to create buckets in the Europe (Ireland) Region. For more information, see Accessing a bucket.  If you send your create bucket request to the s3.amazonaws.com endpoint, the request goes to the us-east-1 Region. Accordingly, the signature calculations in Signature Version 4 must use us-east-1 as the Region, even if the location constraint in the request specifies another Region where the bucket is to be created. If you create a bucket in a Region other than US East (N. Virginia), your application must be able to handle 307 redirect. For more information, see Virtual hosting of buckets.  When creating a bucket using this operation, you can optionally specify the accounts or groups that should be granted specific permissions on the bucket. There are two ways to grant the appropriate permissions using the request headers.   Specify a canned ACL using the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL.   Specify access permissions explicitly using the x-amz-grant-read, x-amz-grant-write, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. These headers map to the set of permissions Amazon S3 supports in an ACL. For more information, see Access control list (ACL) overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:  x-amz-grant-read: id="11112222333", id="444455556666"      You can use either a canned ACL or specify access permissions explicitly. You cannot do both.   Permissions  If your CreateBucket request specifies ACL permissions and the ACL is public-read, public-read-write, authenticated-read, or if you specify access permissions explicitly through any other ACL, both s3:CreateBucket and s3:PutBucketAcl permissions are needed. If the ACL the CreateBucket request is private, only s3:CreateBucket permission is needed.  If ObjectLockEnabledForBucket is set to true in your CreateBucket request, s3:PutBucketObjectLockConfiguration and s3:PutBucketVersioning permissions are required. The following operations are related to CreateBucket:    PutObject     DeleteBucket   
+   * Creates a new S3 bucket. To create a bucket, you must register with Amazon S3 and have a valid Amazon Web Services Access Key ID to authenticate requests. Anonymous requests are never allowed to create buckets. By creating the bucket, you become the bucket owner. Not every string is an acceptable bucket name. For information about bucket naming restrictions, see Bucket naming rules. If you want to create an Amazon S3 on Outposts bucket, see Create Bucket.  By default, the bucket is created in the US East (N. Virginia) Region. You can optionally specify a Region in the request body. You might choose a Region to optimize latency, minimize costs, or address regulatory requirements. For example, if you reside in Europe, you will probably find it advantageous to create buckets in the Europe (Ireland) Region. For more information, see Accessing a bucket.  If you send your create bucket request to the s3.amazonaws.com endpoint, the request goes to the us-east-1 Region. Accordingly, the signature calculations in Signature Version 4 must use us-east-1 as the Region, even if the location constraint in the request specifies another Region where the bucket is to be created. If you create a bucket in a Region other than US East (N. Virginia), your application must be able to handle 307 redirect. For more information, see Virtual hosting of buckets.   Access control lists (ACLs)  When creating a bucket using this operation, you can optionally configure the bucket ACL to specify the accounts or groups that should be granted specific permissions on the bucket.  If your CreateBucket request includes the BucketOwnerEnforced value for the x-amz-object-ownership header, your request can either not specify an ACL or specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent ACL expressed in the XML format. For more information, see Controlling object ownership in the Amazon S3 User Guide.  There are two ways to grant the appropriate permissions using the request headers.   Specify a canned ACL using the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL.   Specify access permissions explicitly using the x-amz-grant-read, x-amz-grant-write, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. These headers map to the set of permissions Amazon S3 supports in an ACL. For more information, see Access control list (ACL) overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:  x-amz-grant-read: id="11112222333", id="444455556666"      You can use either a canned ACL or specify access permissions explicitly. You cannot do both.   Permissions  In addition to s3:CreateBucket, the following permissions are required when your CreateBucket includes specific headers:    ACLs - If your CreateBucket request specifies ACL permissions and the ACL is public-read, public-read-write, authenticated-read, or if you specify access permissions explicitly through any other ACL, both s3:CreateBucket and s3:PutBucketAcl permissions are needed. If the ACL the CreateBucket request is private or doesn't specify any ACLs, only s3:CreateBucket permission is needed.     Object Lock - If ObjectLockEnabledForBucket is set to true in your CreateBucket request, s3:PutBucketObjectLockConfiguration and s3:PutBucketVersioning permissions are required.    S3 Object Ownership - If your CreateBucket request includes the the x-amz-object-ownership header, s3:PutBucketOwnershipControls permission is required.   The following operations are related to CreateBucket:    PutObject     DeleteBucket   
    */
   createBucket(callback?: (err: AWSError, data: S3.Types.CreateBucketOutput) => void): Request<S3.Types.CreateBucketOutput, AWSError>;
   /**
-   * This action initiates a multipart upload and returns an upload ID. This upload ID is used to associate all of the parts in the specific multipart upload. You specify this upload ID in each of your subsequent upload part requests (see UploadPart). You also include this upload ID in the final request to either complete or abort the multipart upload request. For more information about multipart uploads, see Multipart Upload Overview. If you have configured a lifecycle rule to abort incomplete multipart uploads, the upload must complete within the number of days specified in the bucket lifecycle configuration. Otherwise, the incomplete multipart upload becomes eligible for an abort action and Amazon S3 aborts the multipart upload. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Policy. For information about the permissions required to use the multipart upload API, see Multipart Upload and Permissions. For request signing, multipart upload is just a series of regular requests. You initiate a multipart upload, send one or more requests to upload parts, and then complete the multipart upload process. You sign each request individually. There is nothing special about signing multipart upload requests. For more information about signing, see Authenticating Requests (Amazon Web Services Signature Version 4).   After you initiate a multipart upload and upload one or more parts, to stop being charged for storing the uploaded parts, you must either complete or abort the multipart upload. Amazon S3 frees up the space used to store the parts and stop charging you for storing them only after you either complete or abort a multipart upload.   You can optionally request server-side encryption. For server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. You can provide your own encryption key, or use Amazon Web Services Key Management Service (Amazon Web Services KMS) customer master keys (CMKs) or Amazon S3-managed encryption keys. If you choose to provide your own encryption key, the request headers you provide in UploadPart and UploadPartCopy requests must match the headers you used in the request to initiate the upload by using CreateMultipartUpload.  To perform a multipart upload with encryption using an Amazon Web Services KMS CMK, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey* actions on the key. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information, see Multipart upload API and permissions in the Amazon S3 User Guide. If your Identity and Access Management (IAM) user or role is in the same Amazon Web Services account as the Amazon Web Services KMS CMK, then you must have these permissions on the key policy. If your IAM user or role belongs to a different account than the key, then you must have the permissions on both the key policy and your IAM user or role.  For more information, see Protecting Data Using Server-Side Encryption.  Access Permissions  When copying an object, you can optionally specify the accounts or groups that should be granted specific permissions on the new object. There are two ways to grant the permissions using the request headers:   Specify a canned ACL with the x-amz-acl request header. For more information, see Canned ACL.   Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview.   You can use either a canned ACL or specify access permissions explicitly. You cannot do both.  Server-Side- Encryption-Specific Request Headers  You can optionally tell Amazon S3 to encrypt data at rest using server-side encryption. Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. The option you use depends on whether you want to use Amazon Web Services managed encryption keys or provide your own encryption key.    Use encryption keys managed by Amazon S3 or customer master keys (CMKs) stored in Amazon Web Services Key Management Service (Amazon Web Services KMS) – If you want Amazon Web Services to manage the keys used to encrypt data, specify the following headers in the request.   x-amz-server-side-encryption   x-amz-server-side-encryption-aws-kms-key-id   x-amz-server-side-encryption-context    If you specify x-amz-server-side-encryption:aws:kms, but don't provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed CMK in Amazon Web Services KMS to protect the data.   All GET and PUT requests for an object protected by Amazon Web Services KMS fail if you don't make them with SSL or by using SigV4.  For more information about server-side encryption with CMKs stored in Amazon Web Services KMS (SSE-KMS), see Protecting Data Using Server-Side Encryption with CMKs stored in Amazon Web Services KMS.   Use customer-provided encryption keys – If you want to manage your own encryption keys, provide all the following headers in the request.   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about server-side encryption with CMKs stored in Amazon Web Services KMS (SSE-KMS), see Protecting Data Using Server-Side Encryption with CMKs stored in Amazon Web Services KMS.    Access-Control-List (ACL)-Specific Request Headers  You also can use the following access control–related headers with this operation. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the access control list (ACL) on the object. For more information, see Using ACLs. With this operation, you can grant access permissions using one of the following two methods:   Specify a canned ACL (x-amz-acl) — Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL.   Specify access permissions explicitly — To explicitly grant access permissions to specific Amazon Web Services accounts or groups, use the following headers. Each header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. In the header, you specify a list of grantees who get the specific permission. To grant permissions explicitly, use:   x-amz-grant-read   x-amz-grant-write   x-amz-grant-read-acp   x-amz-grant-write-acp   x-amz-grant-full-control   You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:  x-amz-grant-read: id="11112222333", id="444455556666"       The following operations are related to CreateMultipartUpload:    UploadPart     CompleteMultipartUpload     AbortMultipartUpload     ListParts     ListMultipartUploads   
+   * This action initiates a multipart upload and returns an upload ID. This upload ID is used to associate all of the parts in the specific multipart upload. You specify this upload ID in each of your subsequent upload part requests (see UploadPart). You also include this upload ID in the final request to either complete or abort the multipart upload request. For more information about multipart uploads, see Multipart Upload Overview. If you have configured a lifecycle rule to abort incomplete multipart uploads, the upload must complete within the number of days specified in the bucket lifecycle configuration. Otherwise, the incomplete multipart upload becomes eligible for an abort action and Amazon S3 aborts the multipart upload. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Policy. For information about the permissions required to use the multipart upload API, see Multipart Upload and Permissions. For request signing, multipart upload is just a series of regular requests. You initiate a multipart upload, send one or more requests to upload parts, and then complete the multipart upload process. You sign each request individually. There is nothing special about signing multipart upload requests. For more information about signing, see Authenticating Requests (Amazon Web Services Signature Version 4).   After you initiate a multipart upload and upload one or more parts, to stop being charged for storing the uploaded parts, you must either complete or abort the multipart upload. Amazon S3 frees up the space used to store the parts and stop charging you for storing them only after you either complete or abort a multipart upload.   You can optionally request server-side encryption. For server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. You can provide your own encryption key, or use Amazon Web Services KMS keys or Amazon S3-managed encryption keys. If you choose to provide your own encryption key, the request headers you provide in UploadPart and UploadPartCopy requests must match the headers you used in the request to initiate the upload by using CreateMultipartUpload.  To perform a multipart upload with encryption using an Amazon Web Services KMS key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey* actions on the key. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information, see Multipart upload API and permissions in the Amazon S3 User Guide. If your Identity and Access Management (IAM) user or role is in the same Amazon Web Services account as the KMS key, then you must have these permissions on the key policy. If your IAM user or role belongs to a different account than the key, then you must have the permissions on both the key policy and your IAM user or role.  For more information, see Protecting Data Using Server-Side Encryption.  Access Permissions  When copying an object, you can optionally specify the accounts or groups that should be granted specific permissions on the new object. There are two ways to grant the permissions using the request headers:   Specify a canned ACL with the x-amz-acl request header. For more information, see Canned ACL.   Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview.   You can use either a canned ACL or specify access permissions explicitly. You cannot do both.  Server-Side- Encryption-Specific Request Headers  You can optionally tell Amazon S3 to encrypt data at rest using server-side encryption. Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. The option you use depends on whether you want to use Amazon Web Services managed encryption keys or provide your own encryption key.    Use encryption keys managed by Amazon S3 or customer managed key stored in Amazon Web Services Key Management Service (Amazon Web Services KMS) – If you want Amazon Web Services to manage the keys used to encrypt data, specify the following headers in the request.   x-amz-server-side-encryption   x-amz-server-side-encryption-aws-kms-key-id   x-amz-server-side-encryption-context    If you specify x-amz-server-side-encryption:aws:kms, but don't provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed key in Amazon Web Services KMS to protect the data.   All GET and PUT requests for an object protected by Amazon Web Services KMS fail if you don't make them with SSL or by using SigV4.  For more information about server-side encryption with KMS key (SSE-KMS), see Protecting Data Using Server-Side Encryption with KMS keys.   Use customer-provided encryption keys – If you want to manage your own encryption keys, provide all the following headers in the request.   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about server-side encryption with KMS keys (SSE-KMS), see Protecting Data Using Server-Side Encryption with KMS keys.    Access-Control-List (ACL)-Specific Request Headers  You also can use the following access control–related headers with this operation. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the access control list (ACL) on the object. For more information, see Using ACLs. With this operation, you can grant access permissions using one of the following two methods:   Specify a canned ACL (x-amz-acl) — Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL.   Specify access permissions explicitly — To explicitly grant access permissions to specific Amazon Web Services accounts or groups, use the following headers. Each header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. In the header, you specify a list of grantees who get the specific permission. To grant permissions explicitly, use:   x-amz-grant-read   x-amz-grant-write   x-amz-grant-read-acp   x-amz-grant-write-acp   x-amz-grant-full-control   You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:  x-amz-grant-read: id="11112222333", id="444455556666"       The following operations are related to CreateMultipartUpload:    UploadPart     CompleteMultipartUpload     AbortMultipartUpload     ListParts     ListMultipartUploads   
    */
   createMultipartUpload(params: S3.Types.CreateMultipartUploadRequest, callback?: (err: AWSError, data: S3.Types.CreateMultipartUploadOutput) => void): Request<S3.Types.CreateMultipartUploadOutput, AWSError>;
   /**
-   * This action initiates a multipart upload and returns an upload ID. This upload ID is used to associate all of the parts in the specific multipart upload. You specify this upload ID in each of your subsequent upload part requests (see UploadPart). You also include this upload ID in the final request to either complete or abort the multipart upload request. For more information about multipart uploads, see Multipart Upload Overview. If you have configured a lifecycle rule to abort incomplete multipart uploads, the upload must complete within the number of days specified in the bucket lifecycle configuration. Otherwise, the incomplete multipart upload becomes eligible for an abort action and Amazon S3 aborts the multipart upload. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Policy. For information about the permissions required to use the multipart upload API, see Multipart Upload and Permissions. For request signing, multipart upload is just a series of regular requests. You initiate a multipart upload, send one or more requests to upload parts, and then complete the multipart upload process. You sign each request individually. There is nothing special about signing multipart upload requests. For more information about signing, see Authenticating Requests (Amazon Web Services Signature Version 4).   After you initiate a multipart upload and upload one or more parts, to stop being charged for storing the uploaded parts, you must either complete or abort the multipart upload. Amazon S3 frees up the space used to store the parts and stop charging you for storing them only after you either complete or abort a multipart upload.   You can optionally request server-side encryption. For server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. You can provide your own encryption key, or use Amazon Web Services Key Management Service (Amazon Web Services KMS) customer master keys (CMKs) or Amazon S3-managed encryption keys. If you choose to provide your own encryption key, the request headers you provide in UploadPart and UploadPartCopy requests must match the headers you used in the request to initiate the upload by using CreateMultipartUpload.  To perform a multipart upload with encryption using an Amazon Web Services KMS CMK, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey* actions on the key. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information, see Multipart upload API and permissions in the Amazon S3 User Guide. If your Identity and Access Management (IAM) user or role is in the same Amazon Web Services account as the Amazon Web Services KMS CMK, then you must have these permissions on the key policy. If your IAM user or role belongs to a different account than the key, then you must have the permissions on both the key policy and your IAM user or role.  For more information, see Protecting Data Using Server-Side Encryption.  Access Permissions  When copying an object, you can optionally specify the accounts or groups that should be granted specific permissions on the new object. There are two ways to grant the permissions using the request headers:   Specify a canned ACL with the x-amz-acl request header. For more information, see Canned ACL.   Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview.   You can use either a canned ACL or specify access permissions explicitly. You cannot do both.  Server-Side- Encryption-Specific Request Headers  You can optionally tell Amazon S3 to encrypt data at rest using server-side encryption. Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. The option you use depends on whether you want to use Amazon Web Services managed encryption keys or provide your own encryption key.    Use encryption keys managed by Amazon S3 or customer master keys (CMKs) stored in Amazon Web Services Key Management Service (Amazon Web Services KMS) – If you want Amazon Web Services to manage the keys used to encrypt data, specify the following headers in the request.   x-amz-server-side-encryption   x-amz-server-side-encryption-aws-kms-key-id   x-amz-server-side-encryption-context    If you specify x-amz-server-side-encryption:aws:kms, but don't provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed CMK in Amazon Web Services KMS to protect the data.   All GET and PUT requests for an object protected by Amazon Web Services KMS fail if you don't make them with SSL or by using SigV4.  For more information about server-side encryption with CMKs stored in Amazon Web Services KMS (SSE-KMS), see Protecting Data Using Server-Side Encryption with CMKs stored in Amazon Web Services KMS.   Use customer-provided encryption keys – If you want to manage your own encryption keys, provide all the following headers in the request.   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about server-side encryption with CMKs stored in Amazon Web Services KMS (SSE-KMS), see Protecting Data Using Server-Side Encryption with CMKs stored in Amazon Web Services KMS.    Access-Control-List (ACL)-Specific Request Headers  You also can use the following access control–related headers with this operation. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the access control list (ACL) on the object. For more information, see Using ACLs. With this operation, you can grant access permissions using one of the following two methods:   Specify a canned ACL (x-amz-acl) — Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL.   Specify access permissions explicitly — To explicitly grant access permissions to specific Amazon Web Services accounts or groups, use the following headers. Each header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. In the header, you specify a list of grantees who get the specific permission. To grant permissions explicitly, use:   x-amz-grant-read   x-amz-grant-write   x-amz-grant-read-acp   x-amz-grant-write-acp   x-amz-grant-full-control   You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:  x-amz-grant-read: id="11112222333", id="444455556666"       The following operations are related to CreateMultipartUpload:    UploadPart     CompleteMultipartUpload     AbortMultipartUpload     ListParts     ListMultipartUploads   
+   * This action initiates a multipart upload and returns an upload ID. This upload ID is used to associate all of the parts in the specific multipart upload. You specify this upload ID in each of your subsequent upload part requests (see UploadPart). You also include this upload ID in the final request to either complete or abort the multipart upload request. For more information about multipart uploads, see Multipart Upload Overview. If you have configured a lifecycle rule to abort incomplete multipart uploads, the upload must complete within the number of days specified in the bucket lifecycle configuration. Otherwise, the incomplete multipart upload becomes eligible for an abort action and Amazon S3 aborts the multipart upload. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Policy. For information about the permissions required to use the multipart upload API, see Multipart Upload and Permissions. For request signing, multipart upload is just a series of regular requests. You initiate a multipart upload, send one or more requests to upload parts, and then complete the multipart upload process. You sign each request individually. There is nothing special about signing multipart upload requests. For more information about signing, see Authenticating Requests (Amazon Web Services Signature Version 4).   After you initiate a multipart upload and upload one or more parts, to stop being charged for storing the uploaded parts, you must either complete or abort the multipart upload. Amazon S3 frees up the space used to store the parts and stop charging you for storing them only after you either complete or abort a multipart upload.   You can optionally request server-side encryption. For server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. You can provide your own encryption key, or use Amazon Web Services KMS keys or Amazon S3-managed encryption keys. If you choose to provide your own encryption key, the request headers you provide in UploadPart and UploadPartCopy requests must match the headers you used in the request to initiate the upload by using CreateMultipartUpload.  To perform a multipart upload with encryption using an Amazon Web Services KMS key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey* actions on the key. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information, see Multipart upload API and permissions in the Amazon S3 User Guide. If your Identity and Access Management (IAM) user or role is in the same Amazon Web Services account as the KMS key, then you must have these permissions on the key policy. If your IAM user or role belongs to a different account than the key, then you must have the permissions on both the key policy and your IAM user or role.  For more information, see Protecting Data Using Server-Side Encryption.  Access Permissions  When copying an object, you can optionally specify the accounts or groups that should be granted specific permissions on the new object. There are two ways to grant the permissions using the request headers:   Specify a canned ACL with the x-amz-acl request header. For more information, see Canned ACL.   Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview.   You can use either a canned ACL or specify access permissions explicitly. You cannot do both.  Server-Side- Encryption-Specific Request Headers  You can optionally tell Amazon S3 to encrypt data at rest using server-side encryption. Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. The option you use depends on whether you want to use Amazon Web Services managed encryption keys or provide your own encryption key.    Use encryption keys managed by Amazon S3 or customer managed key stored in Amazon Web Services Key Management Service (Amazon Web Services KMS) – If you want Amazon Web Services to manage the keys used to encrypt data, specify the following headers in the request.   x-amz-server-side-encryption   x-amz-server-side-encryption-aws-kms-key-id   x-amz-server-side-encryption-context    If you specify x-amz-server-side-encryption:aws:kms, but don't provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed key in Amazon Web Services KMS to protect the data.   All GET and PUT requests for an object protected by Amazon Web Services KMS fail if you don't make them with SSL or by using SigV4.  For more information about server-side encryption with KMS key (SSE-KMS), see Protecting Data Using Server-Side Encryption with KMS keys.   Use customer-provided encryption keys – If you want to manage your own encryption keys, provide all the following headers in the request.   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about server-side encryption with KMS keys (SSE-KMS), see Protecting Data Using Server-Side Encryption with KMS keys.    Access-Control-List (ACL)-Specific Request Headers  You also can use the following access control–related headers with this operation. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the access control list (ACL) on the object. For more information, see Using ACLs. With this operation, you can grant access permissions using one of the following two methods:   Specify a canned ACL (x-amz-acl) — Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL.   Specify access permissions explicitly — To explicitly grant access permissions to specific Amazon Web Services accounts or groups, use the following headers. Each header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. In the header, you specify a list of grantees who get the specific permission. To grant permissions explicitly, use:   x-amz-grant-read   x-amz-grant-write   x-amz-grant-read-acp   x-amz-grant-write-acp   x-amz-grant-full-control   You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:  x-amz-grant-read: id="11112222333", id="444455556666"       The following operations are related to CreateMultipartUpload:    UploadPart     CompleteMultipartUpload     AbortMultipartUpload     ListParts     ListMultipartUploads   
    */
   createMultipartUpload(callback?: (err: AWSError, data: S3.Types.CreateMultipartUploadOutput) => void): Request<S3.Types.CreateMultipartUploadOutput, AWSError>;
   /**
@@ -90,11 +90,11 @@ declare class S3 extends S3Customizations {
    */
   deleteBucketEncryption(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Deletes the S3 Intelligent-Tiering configuration from the specified bucket. The S3 Intelligent-Tiering storage class is designed to optimize storage costs by automatically moving data to the most cost-effective storage access tier, without additional operational overhead. S3 Intelligent-Tiering delivers automatic cost savings by moving data between access tiers, when access patterns change. The S3 Intelligent-Tiering storage class is suitable for objects larger than 128 KB that you plan to store for at least 30 days. If the size of an object is less than 128 KB, it is not eligible for auto-tiering. Smaller objects can be stored, but they are always charged at the frequent access tier rates in the S3 Intelligent-Tiering storage class.  If you delete an object before the end of the 30-day minimum storage duration period, you are charged for 30 days. For more information, see Storage class for automatically optimizing frequently and infrequently accessed objects. Operations related to DeleteBucketIntelligentTieringConfiguration include:     GetBucketIntelligentTieringConfiguration     PutBucketIntelligentTieringConfiguration     ListBucketIntelligentTieringConfigurations   
+   * Deletes the S3 Intelligent-Tiering configuration from the specified bucket. The S3 Intelligent-Tiering storage class is designed to optimize storage costs by automatically moving data to the most cost-effective storage access tier, without performance impact or operational overhead. S3 Intelligent-Tiering delivers automatic cost savings in three low latency and high throughput access tiers. To get the lowest storage cost on data that can be accessed in minutes to hours, you can choose to activate additional archiving capabilities. The S3 Intelligent-Tiering storage class is the ideal storage class for data with unknown, changing, or unpredictable access patterns, independent of object size or retention period. If the size of an object is less than 128 KB, it is not monitored and not eligible for auto-tiering. Smaller objects can be stored, but they are always charged at the Frequent Access tier rates in the S3 Intelligent-Tiering storage class. For more information, see Storage class for automatically optimizing frequently and infrequently accessed objects. Operations related to DeleteBucketIntelligentTieringConfiguration include:     GetBucketIntelligentTieringConfiguration     PutBucketIntelligentTieringConfiguration     ListBucketIntelligentTieringConfigurations   
    */
   deleteBucketIntelligentTieringConfiguration(params: S3.Types.DeleteBucketIntelligentTieringConfigurationRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Deletes the S3 Intelligent-Tiering configuration from the specified bucket. The S3 Intelligent-Tiering storage class is designed to optimize storage costs by automatically moving data to the most cost-effective storage access tier, without additional operational overhead. S3 Intelligent-Tiering delivers automatic cost savings by moving data between access tiers, when access patterns change. The S3 Intelligent-Tiering storage class is suitable for objects larger than 128 KB that you plan to store for at least 30 days. If the size of an object is less than 128 KB, it is not eligible for auto-tiering. Smaller objects can be stored, but they are always charged at the frequent access tier rates in the S3 Intelligent-Tiering storage class.  If you delete an object before the end of the 30-day minimum storage duration period, you are charged for 30 days. For more information, see Storage class for automatically optimizing frequently and infrequently accessed objects. Operations related to DeleteBucketIntelligentTieringConfiguration include:     GetBucketIntelligentTieringConfiguration     PutBucketIntelligentTieringConfiguration     ListBucketIntelligentTieringConfigurations   
+   * Deletes the S3 Intelligent-Tiering configuration from the specified bucket. The S3 Intelligent-Tiering storage class is designed to optimize storage costs by automatically moving data to the most cost-effective storage access tier, without performance impact or operational overhead. S3 Intelligent-Tiering delivers automatic cost savings in three low latency and high throughput access tiers. To get the lowest storage cost on data that can be accessed in minutes to hours, you can choose to activate additional archiving capabilities. The S3 Intelligent-Tiering storage class is the ideal storage class for data with unknown, changing, or unpredictable access patterns, independent of object size or retention period. If the size of an object is less than 128 KB, it is not monitored and not eligible for auto-tiering. Smaller objects can be stored, but they are always charged at the Frequent Access tier rates in the S3 Intelligent-Tiering storage class. For more information, see Storage class for automatically optimizing frequently and infrequently accessed objects. Operations related to DeleteBucketIntelligentTieringConfiguration include:     GetBucketIntelligentTieringConfiguration     PutBucketIntelligentTieringConfiguration     ListBucketIntelligentTieringConfigurations   
    */
   deleteBucketIntelligentTieringConfiguration(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -202,11 +202,11 @@ declare class S3 extends S3Customizations {
    */
   getBucketAccelerateConfiguration(callback?: (err: AWSError, data: S3.Types.GetBucketAccelerateConfigurationOutput) => void): Request<S3.Types.GetBucketAccelerateConfigurationOutput, AWSError>;
   /**
-   * This implementation of the GET action uses the acl subresource to return the access control list (ACL) of a bucket. To use GET to return the ACL of the bucket, you must have READ_ACP access to the bucket. If READ_ACP permission is granted to the anonymous user, you can return the ACL of the bucket without using an authorization header.  Related Resources     ListObjects   
+   * This implementation of the GET action uses the acl subresource to return the access control list (ACL) of a bucket. To use GET to return the ACL of the bucket, you must have READ_ACP access to the bucket. If READ_ACP permission is granted to the anonymous user, you can return the ACL of the bucket without using an authorization header.  If your bucket uses the bucket owner enforced setting for S3 Object Ownership, requests to read ACLs are still supported and return the bucket-owner-full-control ACL with the owner being the account that created the bucket. For more information, see  Controlling object ownership and disabling ACLs in the Amazon S3 User Guide.   Related Resources     ListObjects   
    */
   getBucketAcl(params: S3.Types.GetBucketAclRequest, callback?: (err: AWSError, data: S3.Types.GetBucketAclOutput) => void): Request<S3.Types.GetBucketAclOutput, AWSError>;
   /**
-   * This implementation of the GET action uses the acl subresource to return the access control list (ACL) of a bucket. To use GET to return the ACL of the bucket, you must have READ_ACP access to the bucket. If READ_ACP permission is granted to the anonymous user, you can return the ACL of the bucket without using an authorization header.  Related Resources     ListObjects   
+   * This implementation of the GET action uses the acl subresource to return the access control list (ACL) of a bucket. To use GET to return the ACL of the bucket, you must have READ_ACP access to the bucket. If READ_ACP permission is granted to the anonymous user, you can return the ACL of the bucket without using an authorization header.  If your bucket uses the bucket owner enforced setting for S3 Object Ownership, requests to read ACLs are still supported and return the bucket-owner-full-control ACL with the owner being the account that created the bucket. For more information, see  Controlling object ownership and disabling ACLs in the Amazon S3 User Guide.   Related Resources     ListObjects   
    */
   getBucketAcl(callback?: (err: AWSError, data: S3.Types.GetBucketAclOutput) => void): Request<S3.Types.GetBucketAclOutput, AWSError>;
   /**
@@ -234,11 +234,11 @@ declare class S3 extends S3Customizations {
    */
   getBucketEncryption(callback?: (err: AWSError, data: S3.Types.GetBucketEncryptionOutput) => void): Request<S3.Types.GetBucketEncryptionOutput, AWSError>;
   /**
-   * Gets the S3 Intelligent-Tiering configuration from the specified bucket. The S3 Intelligent-Tiering storage class is designed to optimize storage costs by automatically moving data to the most cost-effective storage access tier, without additional operational overhead. S3 Intelligent-Tiering delivers automatic cost savings by moving data between access tiers, when access patterns change. The S3 Intelligent-Tiering storage class is suitable for objects larger than 128 KB that you plan to store for at least 30 days. If the size of an object is less than 128 KB, it is not eligible for auto-tiering. Smaller objects can be stored, but they are always charged at the frequent access tier rates in the S3 Intelligent-Tiering storage class.  If you delete an object before the end of the 30-day minimum storage duration period, you are charged for 30 days. For more information, see Storage class for automatically optimizing frequently and infrequently accessed objects. Operations related to GetBucketIntelligentTieringConfiguration include:     DeleteBucketIntelligentTieringConfiguration     PutBucketIntelligentTieringConfiguration     ListBucketIntelligentTieringConfigurations   
+   * Gets the S3 Intelligent-Tiering configuration from the specified bucket. The S3 Intelligent-Tiering storage class is designed to optimize storage costs by automatically moving data to the most cost-effective storage access tier, without performance impact or operational overhead. S3 Intelligent-Tiering delivers automatic cost savings in three low latency and high throughput access tiers. To get the lowest storage cost on data that can be accessed in minutes to hours, you can choose to activate additional archiving capabilities. The S3 Intelligent-Tiering storage class is the ideal storage class for data with unknown, changing, or unpredictable access patterns, independent of object size or retention period. If the size of an object is less than 128 KB, it is not monitored and not eligible for auto-tiering. Smaller objects can be stored, but they are always charged at the Frequent Access tier rates in the S3 Intelligent-Tiering storage class. For more information, see Storage class for automatically optimizing frequently and infrequently accessed objects. Operations related to GetBucketIntelligentTieringConfiguration include:     DeleteBucketIntelligentTieringConfiguration     PutBucketIntelligentTieringConfiguration     ListBucketIntelligentTieringConfigurations   
    */
   getBucketIntelligentTieringConfiguration(params: S3.Types.GetBucketIntelligentTieringConfigurationRequest, callback?: (err: AWSError, data: S3.Types.GetBucketIntelligentTieringConfigurationOutput) => void): Request<S3.Types.GetBucketIntelligentTieringConfigurationOutput, AWSError>;
   /**
-   * Gets the S3 Intelligent-Tiering configuration from the specified bucket. The S3 Intelligent-Tiering storage class is designed to optimize storage costs by automatically moving data to the most cost-effective storage access tier, without additional operational overhead. S3 Intelligent-Tiering delivers automatic cost savings by moving data between access tiers, when access patterns change. The S3 Intelligent-Tiering storage class is suitable for objects larger than 128 KB that you plan to store for at least 30 days. If the size of an object is less than 128 KB, it is not eligible for auto-tiering. Smaller objects can be stored, but they are always charged at the frequent access tier rates in the S3 Intelligent-Tiering storage class.  If you delete an object before the end of the 30-day minimum storage duration period, you are charged for 30 days. For more information, see Storage class for automatically optimizing frequently and infrequently accessed objects. Operations related to GetBucketIntelligentTieringConfiguration include:     DeleteBucketIntelligentTieringConfiguration     PutBucketIntelligentTieringConfiguration     ListBucketIntelligentTieringConfigurations   
+   * Gets the S3 Intelligent-Tiering configuration from the specified bucket. The S3 Intelligent-Tiering storage class is designed to optimize storage costs by automatically moving data to the most cost-effective storage access tier, without performance impact or operational overhead. S3 Intelligent-Tiering delivers automatic cost savings in three low latency and high throughput access tiers. To get the lowest storage cost on data that can be accessed in minutes to hours, you can choose to activate additional archiving capabilities. The S3 Intelligent-Tiering storage class is the ideal storage class for data with unknown, changing, or unpredictable access patterns, independent of object size or retention period. If the size of an object is less than 128 KB, it is not monitored and not eligible for auto-tiering. Smaller objects can be stored, but they are always charged at the Frequent Access tier rates in the S3 Intelligent-Tiering storage class. For more information, see Storage class for automatically optimizing frequently and infrequently accessed objects. Operations related to GetBucketIntelligentTieringConfiguration include:     DeleteBucketIntelligentTieringConfiguration     PutBucketIntelligentTieringConfiguration     ListBucketIntelligentTieringConfigurations   
    */
   getBucketIntelligentTieringConfiguration(callback?: (err: AWSError, data: S3.Types.GetBucketIntelligentTieringConfigurationOutput) => void): Request<S3.Types.GetBucketIntelligentTieringConfigurationOutput, AWSError>;
   /**
@@ -306,11 +306,11 @@ declare class S3 extends S3Customizations {
    */
   getBucketNotificationConfiguration(callback?: (err: AWSError, data: S3.Types.NotificationConfiguration) => void): Request<S3.Types.NotificationConfiguration, AWSError>;
   /**
-   * Retrieves OwnershipControls for an Amazon S3 bucket. To use this operation, you must have the s3:GetBucketOwnershipControls permission. For more information about Amazon S3 permissions, see Specifying Permissions in a Policy.  For information about Amazon S3 Object Ownership, see Using Object Ownership.  The following operations are related to GetBucketOwnershipControls:    PutBucketOwnershipControls     DeleteBucketOwnershipControls   
+   * Retrieves OwnershipControls for an Amazon S3 bucket. To use this operation, you must have the s3:GetBucketOwnershipControls permission. For more information about Amazon S3 permissions, see Specifying permissions in a policy.  For information about Amazon S3 Object Ownership, see Using Object Ownership.  The following operations are related to GetBucketOwnershipControls:    PutBucketOwnershipControls     DeleteBucketOwnershipControls   
    */
   getBucketOwnershipControls(params: S3.Types.GetBucketOwnershipControlsRequest, callback?: (err: AWSError, data: S3.Types.GetBucketOwnershipControlsOutput) => void): Request<S3.Types.GetBucketOwnershipControlsOutput, AWSError>;
   /**
-   * Retrieves OwnershipControls for an Amazon S3 bucket. To use this operation, you must have the s3:GetBucketOwnershipControls permission. For more information about Amazon S3 permissions, see Specifying Permissions in a Policy.  For information about Amazon S3 Object Ownership, see Using Object Ownership.  The following operations are related to GetBucketOwnershipControls:    PutBucketOwnershipControls     DeleteBucketOwnershipControls   
+   * Retrieves OwnershipControls for an Amazon S3 bucket. To use this operation, you must have the s3:GetBucketOwnershipControls permission. For more information about Amazon S3 permissions, see Specifying permissions in a policy.  For information about Amazon S3 Object Ownership, see Using Object Ownership.  The following operations are related to GetBucketOwnershipControls:    PutBucketOwnershipControls     DeleteBucketOwnershipControls   
    */
   getBucketOwnershipControls(callback?: (err: AWSError, data: S3.Types.GetBucketOwnershipControlsOutput) => void): Request<S3.Types.GetBucketOwnershipControlsOutput, AWSError>;
   /**
@@ -370,19 +370,19 @@ declare class S3 extends S3Customizations {
    */
   getBucketWebsite(callback?: (err: AWSError, data: S3.Types.GetBucketWebsiteOutput) => void): Request<S3.Types.GetBucketWebsiteOutput, AWSError>;
   /**
-   * Retrieves objects from Amazon S3. To use GET, you must have READ access to the object. If you grant READ access to the anonymous user, you can return the object without using an authorization header. An Amazon S3 bucket has no directory hierarchy such as you would find in a typical computer file system. You can, however, create a logical hierarchy by using object key names that imply a folder structure. For example, instead of naming an object sample.jpg, you can name it photos/2006/February/sample.jpg. To get an object from such a logical hierarchy, specify the full key name for the object in the GET operation. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the resource as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the resource as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification. To distribute large files to many people, you can save bandwidth costs by using BitTorrent. For more information, see Amazon S3 Torrent. For more information about returning the ACL of an object, see GetObjectAcl. If the object you are retrieving is stored in the S3 Glacier or S3 Glacier Deep Archive storage class, or S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this action returns an InvalidObjectStateError error. For information about restoring archived objects, see Restoring Archived Objects. Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with CMKs stored in Amazon Web Services KMS (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys). Assuming you have the relevant permission to read object tags, the response also returns the x-amz-tagging-count header that provides the count of number of tags associated with the object. You can use GetObjectTagging to retrieve the tag set associated with an object.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 will return an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 will return an HTTP status code 403 ("access denied") error.    Versioning  By default, the GET action returns the current version of an object. To return a different version, use the versionId subresource.    You need the s3:GetObjectVersion permission to access a specific version of an object.    If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.    For more information about versioning, see PutBucketVersioning.   Overriding Response Header Values  There are times when you want to override certain response header values in a GET response. For example, you might override the Content-Disposition response header value in your GET request. You can override values for a set of response headers using the following query parameters. These response header values are sent only on a successful request, that is, when status code 200 OK is returned. The set of headers you can override using these parameters is a subset of the headers that Amazon S3 accepts when you create an object. The response headers that you can override for the GET response are Content-Type, Content-Language, Expires, Cache-Control, Content-Disposition, and Content-Encoding. To override these header values in the GET response, you use the following request parameters.  You must sign the request, either using an Authorization header or a presigned URL, when using these parameters. They cannot be used with an unsigned (anonymous) request.     response-content-type     response-content-language     response-expires     response-cache-control     response-content-disposition     response-content-encoding     Additional Considerations about Request Headers  If both of the If-Match and If-Unmodified-Since headers are present in the request as follows: If-Match condition evaluates to true, and; If-Unmodified-Since condition evaluates to false; then, S3 returns 200 OK and the data requested.  If both of the If-None-Match and If-Modified-Since headers are present in the request as follows: If-None-Match condition evaluates to false, and; If-Modified-Since condition evaluates to true; then, S3 returns 304 Not Modified response code. For more information about conditional requests, see RFC 7232. The following operations are related to GetObject:    ListBuckets     GetObjectAcl   
+   * Retrieves objects from Amazon S3. To use GET, you must have READ access to the object. If you grant READ access to the anonymous user, you can return the object without using an authorization header. An Amazon S3 bucket has no directory hierarchy such as you would find in a typical computer file system. You can, however, create a logical hierarchy by using object key names that imply a folder structure. For example, instead of naming an object sample.jpg, you can name it photos/2006/February/sample.jpg. To get an object from such a logical hierarchy, specify the full key name for the object in the GET operation. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the resource as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the resource as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification. To distribute large files to many people, you can save bandwidth costs by using BitTorrent. For more information, see Amazon S3 Torrent. For more information about returning the ACL of an object, see GetObjectAcl. If the object you are retrieving is stored in the S3 Glacier or S3 Glacier Deep Archive storage class, or S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this action returns an InvalidObjectStateError error. For information about restoring archived objects, see Restoring Archived Objects. Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with KMS keys (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys). Assuming you have the relevant permission to read object tags, the response also returns the x-amz-tagging-count header that provides the count of number of tags associated with the object. You can use GetObjectTagging to retrieve the tag set associated with an object.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 will return an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 will return an HTTP status code 403 ("access denied") error.    Versioning  By default, the GET action returns the current version of an object. To return a different version, use the versionId subresource.     If you supply a versionId, you need the s3:GetObjectVersion permission to access a specific version of an object. If you request a specific version, you do not need to have the s3:GetObject permission.    If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.    For more information about versioning, see PutBucketVersioning.   Overriding Response Header Values  There are times when you want to override certain response header values in a GET response. For example, you might override the Content-Disposition response header value in your GET request. You can override values for a set of response headers using the following query parameters. These response header values are sent only on a successful request, that is, when status code 200 OK is returned. The set of headers you can override using these parameters is a subset of the headers that Amazon S3 accepts when you create an object. The response headers that you can override for the GET response are Content-Type, Content-Language, Expires, Cache-Control, Content-Disposition, and Content-Encoding. To override these header values in the GET response, you use the following request parameters.  You must sign the request, either using an Authorization header or a presigned URL, when using these parameters. They cannot be used with an unsigned (anonymous) request.     response-content-type     response-content-language     response-expires     response-cache-control     response-content-disposition     response-content-encoding     Additional Considerations about Request Headers  If both of the If-Match and If-Unmodified-Since headers are present in the request as follows: If-Match condition evaluates to true, and; If-Unmodified-Since condition evaluates to false; then, S3 returns 200 OK and the data requested.  If both of the If-None-Match and If-Modified-Since headers are present in the request as follows: If-None-Match condition evaluates to false, and; If-Modified-Since condition evaluates to true; then, S3 returns 304 Not Modified response code. For more information about conditional requests, see RFC 7232. The following operations are related to GetObject:    ListBuckets     GetObjectAcl   
    */
   getObject(params: S3.Types.GetObjectRequest, callback?: (err: AWSError, data: S3.Types.GetObjectOutput) => void): Request<S3.Types.GetObjectOutput, AWSError>;
   /**
-   * Retrieves objects from Amazon S3. To use GET, you must have READ access to the object. If you grant READ access to the anonymous user, you can return the object without using an authorization header. An Amazon S3 bucket has no directory hierarchy such as you would find in a typical computer file system. You can, however, create a logical hierarchy by using object key names that imply a folder structure. For example, instead of naming an object sample.jpg, you can name it photos/2006/February/sample.jpg. To get an object from such a logical hierarchy, specify the full key name for the object in the GET operation. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the resource as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the resource as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification. To distribute large files to many people, you can save bandwidth costs by using BitTorrent. For more information, see Amazon S3 Torrent. For more information about returning the ACL of an object, see GetObjectAcl. If the object you are retrieving is stored in the S3 Glacier or S3 Glacier Deep Archive storage class, or S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this action returns an InvalidObjectStateError error. For information about restoring archived objects, see Restoring Archived Objects. Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with CMKs stored in Amazon Web Services KMS (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys). Assuming you have the relevant permission to read object tags, the response also returns the x-amz-tagging-count header that provides the count of number of tags associated with the object. You can use GetObjectTagging to retrieve the tag set associated with an object.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 will return an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 will return an HTTP status code 403 ("access denied") error.    Versioning  By default, the GET action returns the current version of an object. To return a different version, use the versionId subresource.    You need the s3:GetObjectVersion permission to access a specific version of an object.    If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.    For more information about versioning, see PutBucketVersioning.   Overriding Response Header Values  There are times when you want to override certain response header values in a GET response. For example, you might override the Content-Disposition response header value in your GET request. You can override values for a set of response headers using the following query parameters. These response header values are sent only on a successful request, that is, when status code 200 OK is returned. The set of headers you can override using these parameters is a subset of the headers that Amazon S3 accepts when you create an object. The response headers that you can override for the GET response are Content-Type, Content-Language, Expires, Cache-Control, Content-Disposition, and Content-Encoding. To override these header values in the GET response, you use the following request parameters.  You must sign the request, either using an Authorization header or a presigned URL, when using these parameters. They cannot be used with an unsigned (anonymous) request.     response-content-type     response-content-language     response-expires     response-cache-control     response-content-disposition     response-content-encoding     Additional Considerations about Request Headers  If both of the If-Match and If-Unmodified-Since headers are present in the request as follows: If-Match condition evaluates to true, and; If-Unmodified-Since condition evaluates to false; then, S3 returns 200 OK and the data requested.  If both of the If-None-Match and If-Modified-Since headers are present in the request as follows: If-None-Match condition evaluates to false, and; If-Modified-Since condition evaluates to true; then, S3 returns 304 Not Modified response code. For more information about conditional requests, see RFC 7232. The following operations are related to GetObject:    ListBuckets     GetObjectAcl   
+   * Retrieves objects from Amazon S3. To use GET, you must have READ access to the object. If you grant READ access to the anonymous user, you can return the object without using an authorization header. An Amazon S3 bucket has no directory hierarchy such as you would find in a typical computer file system. You can, however, create a logical hierarchy by using object key names that imply a folder structure. For example, instead of naming an object sample.jpg, you can name it photos/2006/February/sample.jpg. To get an object from such a logical hierarchy, specify the full key name for the object in the GET operation. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the resource as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the resource as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification. To distribute large files to many people, you can save bandwidth costs by using BitTorrent. For more information, see Amazon S3 Torrent. For more information about returning the ACL of an object, see GetObjectAcl. If the object you are retrieving is stored in the S3 Glacier or S3 Glacier Deep Archive storage class, or S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this action returns an InvalidObjectStateError error. For information about restoring archived objects, see Restoring Archived Objects. Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with KMS keys (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys). Assuming you have the relevant permission to read object tags, the response also returns the x-amz-tagging-count header that provides the count of number of tags associated with the object. You can use GetObjectTagging to retrieve the tag set associated with an object.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 will return an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 will return an HTTP status code 403 ("access denied") error.    Versioning  By default, the GET action returns the current version of an object. To return a different version, use the versionId subresource.     If you supply a versionId, you need the s3:GetObjectVersion permission to access a specific version of an object. If you request a specific version, you do not need to have the s3:GetObject permission.    If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.    For more information about versioning, see PutBucketVersioning.   Overriding Response Header Values  There are times when you want to override certain response header values in a GET response. For example, you might override the Content-Disposition response header value in your GET request. You can override values for a set of response headers using the following query parameters. These response header values are sent only on a successful request, that is, when status code 200 OK is returned. The set of headers you can override using these parameters is a subset of the headers that Amazon S3 accepts when you create an object. The response headers that you can override for the GET response are Content-Type, Content-Language, Expires, Cache-Control, Content-Disposition, and Content-Encoding. To override these header values in the GET response, you use the following request parameters.  You must sign the request, either using an Authorization header or a presigned URL, when using these parameters. They cannot be used with an unsigned (anonymous) request.     response-content-type     response-content-language     response-expires     response-cache-control     response-content-disposition     response-content-encoding     Additional Considerations about Request Headers  If both of the If-Match and If-Unmodified-Since headers are present in the request as follows: If-Match condition evaluates to true, and; If-Unmodified-Since condition evaluates to false; then, S3 returns 200 OK and the data requested.  If both of the If-None-Match and If-Modified-Since headers are present in the request as follows: If-None-Match condition evaluates to false, and; If-Modified-Since condition evaluates to true; then, S3 returns 304 Not Modified response code. For more information about conditional requests, see RFC 7232. The following operations are related to GetObject:    ListBuckets     GetObjectAcl   
    */
   getObject(callback?: (err: AWSError, data: S3.Types.GetObjectOutput) => void): Request<S3.Types.GetObjectOutput, AWSError>;
   /**
-   * Returns the access control list (ACL) of an object. To use this operation, you must have READ_ACP access to the object. This action is not supported by Amazon S3 on Outposts.  Versioning  By default, GET returns ACL information about the current version of an object. To return ACL information about a different version, use the versionId subresource. The following operations are related to GetObjectAcl:    GetObject     DeleteObject     PutObject   
+   * Returns the access control list (ACL) of an object. To use this operation, you must have READ_ACP access to the object. This action is not supported by Amazon S3 on Outposts.  Versioning  By default, GET returns ACL information about the current version of an object. To return ACL information about a different version, use the versionId subresource.  If your bucket uses the bucket owner enforced setting for S3 Object Ownership, requests to read ACLs are still supported and return the bucket-owner-full-control ACL with the owner being the account that created the bucket. For more information, see  Controlling object ownership and disabling ACLs in the Amazon S3 User Guide.  The following operations are related to GetObjectAcl:    GetObject     DeleteObject     PutObject   
    */
   getObjectAcl(params: S3.Types.GetObjectAclRequest, callback?: (err: AWSError, data: S3.Types.GetObjectAclOutput) => void): Request<S3.Types.GetObjectAclOutput, AWSError>;
   /**
-   * Returns the access control list (ACL) of an object. To use this operation, you must have READ_ACP access to the object. This action is not supported by Amazon S3 on Outposts.  Versioning  By default, GET returns ACL information about the current version of an object. To return ACL information about a different version, use the versionId subresource. The following operations are related to GetObjectAcl:    GetObject     DeleteObject     PutObject   
+   * Returns the access control list (ACL) of an object. To use this operation, you must have READ_ACP access to the object. This action is not supported by Amazon S3 on Outposts.  Versioning  By default, GET returns ACL information about the current version of an object. To return ACL information about a different version, use the versionId subresource.  If your bucket uses the bucket owner enforced setting for S3 Object Ownership, requests to read ACLs are still supported and return the bucket-owner-full-control ACL with the owner being the account that created the bucket. For more information, see  Controlling object ownership and disabling ACLs in the Amazon S3 User Guide.  The following operations are related to GetObjectAcl:    GetObject     DeleteObject     PutObject   
    */
   getObjectAcl(callback?: (err: AWSError, data: S3.Types.GetObjectAclOutput) => void): Request<S3.Types.GetObjectAclOutput, AWSError>;
   /**
@@ -442,11 +442,11 @@ declare class S3 extends S3Customizations {
    */
   headBucket(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * The HEAD action retrieves metadata from an object without returning the object itself. This action is useful if you're only interested in an object's metadata. To use HEAD, you must have READ access to the object. A HEAD request has the same options as a GET action on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic 404 Not Found or 403 Forbidden code. It is not possible to retrieve the exact exception beyond these error codes. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).    Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with CMKs stored in Amazon Web Services KMS (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error.    The last modified property in this case is the creation date of the object.    Request headers are limited to 8 KB in size. For more information, see Common Request Headers. Consider the following when using request headers:    Consideration 1 – If both of the If-Match and If-Unmodified-Since headers are present in the request as follows:    If-Match condition evaluates to true, and;    If-Unmodified-Since condition evaluates to false;   Then Amazon S3 returns 200 OK and the data requested.    Consideration 2 – If both of the If-None-Match and If-Modified-Since headers are present in the request as follows:    If-None-Match condition evaluates to false, and;    If-Modified-Since condition evaluates to true;   Then Amazon S3 returns the 304 Not Modified response code.   For more information about conditional requests, see RFC 7232.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 ("access denied") error.   The following action is related to HeadObject:    GetObject   
+   * The HEAD action retrieves metadata from an object without returning the object itself. This action is useful if you're only interested in an object's metadata. To use HEAD, you must have READ access to the object. A HEAD request has the same options as a GET action on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic 404 Not Found or 403 Forbidden code. It is not possible to retrieve the exact exception beyond these error codes. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).    Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with KMS keys (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error.    The last modified property in this case is the creation date of the object.    Request headers are limited to 8 KB in size. For more information, see Common Request Headers. Consider the following when using request headers:    Consideration 1 – If both of the If-Match and If-Unmodified-Since headers are present in the request as follows:    If-Match condition evaluates to true, and;    If-Unmodified-Since condition evaluates to false;   Then Amazon S3 returns 200 OK and the data requested.    Consideration 2 – If both of the If-None-Match and If-Modified-Since headers are present in the request as follows:    If-None-Match condition evaluates to false, and;    If-Modified-Since condition evaluates to true;   Then Amazon S3 returns the 304 Not Modified response code.   For more information about conditional requests, see RFC 7232.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 ("access denied") error.   The following action is related to HeadObject:    GetObject   
    */
   headObject(params: S3.Types.HeadObjectRequest, callback?: (err: AWSError, data: S3.Types.HeadObjectOutput) => void): Request<S3.Types.HeadObjectOutput, AWSError>;
   /**
-   * The HEAD action retrieves metadata from an object without returning the object itself. This action is useful if you're only interested in an object's metadata. To use HEAD, you must have READ access to the object. A HEAD request has the same options as a GET action on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic 404 Not Found or 403 Forbidden code. It is not possible to retrieve the exact exception beyond these error codes. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).    Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with CMKs stored in Amazon Web Services KMS (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error.    The last modified property in this case is the creation date of the object.    Request headers are limited to 8 KB in size. For more information, see Common Request Headers. Consider the following when using request headers:    Consideration 1 – If both of the If-Match and If-Unmodified-Since headers are present in the request as follows:    If-Match condition evaluates to true, and;    If-Unmodified-Since condition evaluates to false;   Then Amazon S3 returns 200 OK and the data requested.    Consideration 2 – If both of the If-None-Match and If-Modified-Since headers are present in the request as follows:    If-None-Match condition evaluates to false, and;    If-Modified-Since condition evaluates to true;   Then Amazon S3 returns the 304 Not Modified response code.   For more information about conditional requests, see RFC 7232.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 ("access denied") error.   The following action is related to HeadObject:    GetObject   
+   * The HEAD action retrieves metadata from an object without returning the object itself. This action is useful if you're only interested in an object's metadata. To use HEAD, you must have READ access to the object. A HEAD request has the same options as a GET action on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic 404 Not Found or 403 Forbidden code. It is not possible to retrieve the exact exception beyond these error codes. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).    Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with KMS keys (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error.    The last modified property in this case is the creation date of the object.    Request headers are limited to 8 KB in size. For more information, see Common Request Headers. Consider the following when using request headers:    Consideration 1 – If both of the If-Match and If-Unmodified-Since headers are present in the request as follows:    If-Match condition evaluates to true, and;    If-Unmodified-Since condition evaluates to false;   Then Amazon S3 returns 200 OK and the data requested.    Consideration 2 – If both of the If-None-Match and If-Modified-Since headers are present in the request as follows:    If-None-Match condition evaluates to false, and;    If-Modified-Since condition evaluates to true;   Then Amazon S3 returns the 304 Not Modified response code.   For more information about conditional requests, see RFC 7232.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 ("access denied") error.   The following action is related to HeadObject:    GetObject   
    */
   headObject(callback?: (err: AWSError, data: S3.Types.HeadObjectOutput) => void): Request<S3.Types.HeadObjectOutput, AWSError>;
   /**
@@ -458,11 +458,11 @@ declare class S3 extends S3Customizations {
    */
   listBucketAnalyticsConfigurations(callback?: (err: AWSError, data: S3.Types.ListBucketAnalyticsConfigurationsOutput) => void): Request<S3.Types.ListBucketAnalyticsConfigurationsOutput, AWSError>;
   /**
-   * Lists the S3 Intelligent-Tiering configuration from the specified bucket. The S3 Intelligent-Tiering storage class is designed to optimize storage costs by automatically moving data to the most cost-effective storage access tier, without additional operational overhead. S3 Intelligent-Tiering delivers automatic cost savings by moving data between access tiers, when access patterns change. The S3 Intelligent-Tiering storage class is suitable for objects larger than 128 KB that you plan to store for at least 30 days. If the size of an object is less than 128 KB, it is not eligible for auto-tiering. Smaller objects can be stored, but they are always charged at the frequent access tier rates in the S3 Intelligent-Tiering storage class.  If you delete an object before the end of the 30-day minimum storage duration period, you are charged for 30 days. For more information, see Storage class for automatically optimizing frequently and infrequently accessed objects. Operations related to ListBucketIntelligentTieringConfigurations include:     DeleteBucketIntelligentTieringConfiguration     PutBucketIntelligentTieringConfiguration     GetBucketIntelligentTieringConfiguration   
+   * Lists the S3 Intelligent-Tiering configuration from the specified bucket. The S3 Intelligent-Tiering storage class is designed to optimize storage costs by automatically moving data to the most cost-effective storage access tier, without performance impact or operational overhead. S3 Intelligent-Tiering delivers automatic cost savings in three low latency and high throughput access tiers. To get the lowest storage cost on data that can be accessed in minutes to hours, you can choose to activate additional archiving capabilities. The S3 Intelligent-Tiering storage class is the ideal storage class for data with unknown, changing, or unpredictable access patterns, independent of object size or retention period. If the size of an object is less than 128 KB, it is not monitored and not eligible for auto-tiering. Smaller objects can be stored, but they are always charged at the Frequent Access tier rates in the S3 Intelligent-Tiering storage class. For more information, see Storage class for automatically optimizing frequently and infrequently accessed objects. Operations related to ListBucketIntelligentTieringConfigurations include:     DeleteBucketIntelligentTieringConfiguration     PutBucketIntelligentTieringConfiguration     GetBucketIntelligentTieringConfiguration   
    */
   listBucketIntelligentTieringConfigurations(params: S3.Types.ListBucketIntelligentTieringConfigurationsRequest, callback?: (err: AWSError, data: S3.Types.ListBucketIntelligentTieringConfigurationsOutput) => void): Request<S3.Types.ListBucketIntelligentTieringConfigurationsOutput, AWSError>;
   /**
-   * Lists the S3 Intelligent-Tiering configuration from the specified bucket. The S3 Intelligent-Tiering storage class is designed to optimize storage costs by automatically moving data to the most cost-effective storage access tier, without additional operational overhead. S3 Intelligent-Tiering delivers automatic cost savings by moving data between access tiers, when access patterns change. The S3 Intelligent-Tiering storage class is suitable for objects larger than 128 KB that you plan to store for at least 30 days. If the size of an object is less than 128 KB, it is not eligible for auto-tiering. Smaller objects can be stored, but they are always charged at the frequent access tier rates in the S3 Intelligent-Tiering storage class.  If you delete an object before the end of the 30-day minimum storage duration period, you are charged for 30 days. For more information, see Storage class for automatically optimizing frequently and infrequently accessed objects. Operations related to ListBucketIntelligentTieringConfigurations include:     DeleteBucketIntelligentTieringConfiguration     PutBucketIntelligentTieringConfiguration     GetBucketIntelligentTieringConfiguration   
+   * Lists the S3 Intelligent-Tiering configuration from the specified bucket. The S3 Intelligent-Tiering storage class is designed to optimize storage costs by automatically moving data to the most cost-effective storage access tier, without performance impact or operational overhead. S3 Intelligent-Tiering delivers automatic cost savings in three low latency and high throughput access tiers. To get the lowest storage cost on data that can be accessed in minutes to hours, you can choose to activate additional archiving capabilities. The S3 Intelligent-Tiering storage class is the ideal storage class for data with unknown, changing, or unpredictable access patterns, independent of object size or retention period. If the size of an object is less than 128 KB, it is not monitored and not eligible for auto-tiering. Smaller objects can be stored, but they are always charged at the Frequent Access tier rates in the S3 Intelligent-Tiering storage class. For more information, see Storage class for automatically optimizing frequently and infrequently accessed objects. Operations related to ListBucketIntelligentTieringConfigurations include:     DeleteBucketIntelligentTieringConfiguration     PutBucketIntelligentTieringConfiguration     GetBucketIntelligentTieringConfiguration   
    */
   listBucketIntelligentTieringConfigurations(callback?: (err: AWSError, data: S3.Types.ListBucketIntelligentTieringConfigurationsOutput) => void): Request<S3.Types.ListBucketIntelligentTieringConfigurationsOutput, AWSError>;
   /**
@@ -534,11 +534,11 @@ declare class S3 extends S3Customizations {
    */
   putBucketAccelerateConfiguration(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Sets the permissions on an existing bucket using access control lists (ACL). For more information, see Using ACLs. To set the ACL of a bucket, you must have WRITE_ACP permission. You can use one of the following two ways to set a bucket's permissions:   Specify the ACL in the request body   Specify permissions using request headers    You cannot specify access permission using both the body and the request headers.  Depending on your application needs, you may choose to set the ACL on a bucket using either the request body or the headers. For example, if you have an existing application that updates a bucket ACL using the request body, then you can continue to use that approach.  Access Permissions  You can set access permissions using one of the following methods:   Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. Specify the canned ACL name as the value of x-amz-acl. If you use this header, you cannot use other access control-specific headers in your request. For more information, see Canned ACL.   Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. When using these headers, you specify explicit access permissions and grantees (Amazon Web Services accounts or Amazon S3 groups) who will receive the permission. If you use these ACL-specific headers, you cannot use the x-amz-acl header to set a canned ACL. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-write header grants create, overwrite, and delete objects permission to LogDelivery group predefined by Amazon S3 and two Amazon Web Services accounts identified by their email addresses.  x-amz-grant-write: uri="http://acs.amazonaws.com/groups/s3/LogDelivery", id="111122223333", id="555566667777"     You can use either a canned ACL or specify access permissions explicitly. You cannot do both.  Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;    By Email address:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.   Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.     Related Resources     CreateBucket     DeleteBucket     GetObjectAcl   
+   * Sets the permissions on an existing bucket using access control lists (ACL). For more information, see Using ACLs. To set the ACL of a bucket, you must have WRITE_ACP permission. You can use one of the following two ways to set a bucket's permissions:   Specify the ACL in the request body   Specify permissions using request headers    You cannot specify access permission using both the body and the request headers.  Depending on your application needs, you may choose to set the ACL on a bucket using either the request body or the headers. For example, if you have an existing application that updates a bucket ACL using the request body, then you can continue to use that approach.  If your bucket uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. You must use policies to grant access to your bucket and the objects in it. Requests to set ACLs or update ACLs fail and return the AccessControlListNotSupported error code. Requests to read ACLs are still supported. For more information, see Controlling object ownership in the Amazon S3 User Guide.   Access Permissions  You can set access permissions using one of the following methods:   Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. Specify the canned ACL name as the value of x-amz-acl. If you use this header, you cannot use other access control-specific headers in your request. For more information, see Canned ACL.   Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. When using these headers, you specify explicit access permissions and grantees (Amazon Web Services accounts or Amazon S3 groups) who will receive the permission. If you use these ACL-specific headers, you cannot use the x-amz-acl header to set a canned ACL. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-write header grants create, overwrite, and delete objects permission to LogDelivery group predefined by Amazon S3 and two Amazon Web Services accounts identified by their email addresses.  x-amz-grant-write: uri="http://acs.amazonaws.com/groups/s3/LogDelivery", id="111122223333", id="555566667777"     You can use either a canned ACL or specify access permissions explicitly. You cannot do both.  Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;    By Email address:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.   Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.     Related Resources     CreateBucket     DeleteBucket     GetObjectAcl   
    */
   putBucketAcl(params: S3.Types.PutBucketAclRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Sets the permissions on an existing bucket using access control lists (ACL). For more information, see Using ACLs. To set the ACL of a bucket, you must have WRITE_ACP permission. You can use one of the following two ways to set a bucket's permissions:   Specify the ACL in the request body   Specify permissions using request headers    You cannot specify access permission using both the body and the request headers.  Depending on your application needs, you may choose to set the ACL on a bucket using either the request body or the headers. For example, if you have an existing application that updates a bucket ACL using the request body, then you can continue to use that approach.  Access Permissions  You can set access permissions using one of the following methods:   Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. Specify the canned ACL name as the value of x-amz-acl. If you use this header, you cannot use other access control-specific headers in your request. For more information, see Canned ACL.   Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. When using these headers, you specify explicit access permissions and grantees (Amazon Web Services accounts or Amazon S3 groups) who will receive the permission. If you use these ACL-specific headers, you cannot use the x-amz-acl header to set a canned ACL. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-write header grants create, overwrite, and delete objects permission to LogDelivery group predefined by Amazon S3 and two Amazon Web Services accounts identified by their email addresses.  x-amz-grant-write: uri="http://acs.amazonaws.com/groups/s3/LogDelivery", id="111122223333", id="555566667777"     You can use either a canned ACL or specify access permissions explicitly. You cannot do both.  Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;    By Email address:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.   Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.     Related Resources     CreateBucket     DeleteBucket     GetObjectAcl   
+   * Sets the permissions on an existing bucket using access control lists (ACL). For more information, see Using ACLs. To set the ACL of a bucket, you must have WRITE_ACP permission. You can use one of the following two ways to set a bucket's permissions:   Specify the ACL in the request body   Specify permissions using request headers    You cannot specify access permission using both the body and the request headers.  Depending on your application needs, you may choose to set the ACL on a bucket using either the request body or the headers. For example, if you have an existing application that updates a bucket ACL using the request body, then you can continue to use that approach.  If your bucket uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. You must use policies to grant access to your bucket and the objects in it. Requests to set ACLs or update ACLs fail and return the AccessControlListNotSupported error code. Requests to read ACLs are still supported. For more information, see Controlling object ownership in the Amazon S3 User Guide.   Access Permissions  You can set access permissions using one of the following methods:   Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. Specify the canned ACL name as the value of x-amz-acl. If you use this header, you cannot use other access control-specific headers in your request. For more information, see Canned ACL.   Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. When using these headers, you specify explicit access permissions and grantees (Amazon Web Services accounts or Amazon S3 groups) who will receive the permission. If you use these ACL-specific headers, you cannot use the x-amz-acl header to set a canned ACL. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-write header grants create, overwrite, and delete objects permission to LogDelivery group predefined by Amazon S3 and two Amazon Web Services accounts identified by their email addresses.  x-amz-grant-write: uri="http://acs.amazonaws.com/groups/s3/LogDelivery", id="111122223333", id="555566667777"     You can use either a canned ACL or specify access permissions explicitly. You cannot do both.  Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;    By Email address:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.   Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.     Related Resources     CreateBucket     DeleteBucket     GetObjectAcl   
    */
   putBucketAcl(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -558,19 +558,19 @@ declare class S3 extends S3Customizations {
    */
   putBucketCors(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * This action uses the encryption subresource to configure default encryption and Amazon S3 Bucket Key for an existing bucket. Default encryption for a bucket can use server-side encryption with Amazon S3-managed keys (SSE-S3) or Amazon Web Services KMS customer master keys (SSE-KMS). If you specify default encryption using SSE-KMS, you can also configure Amazon S3 Bucket Key. For information about default encryption, see Amazon S3 default bucket encryption in the Amazon S3 User Guide. For more information about S3 Bucket Keys, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  This action requires Amazon Web Services Signature Version 4. For more information, see  Authenticating Requests (Amazon Web Services Signature Version 4).   To use this operation, you must have permissions to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.   Related Resources     GetBucketEncryption     DeleteBucketEncryption   
+   * This action uses the encryption subresource to configure default encryption and Amazon S3 Bucket Key for an existing bucket. Default encryption for a bucket can use server-side encryption with Amazon S3-managed keys (SSE-S3) or customer managed keys (SSE-KMS). If you specify default encryption using SSE-KMS, you can also configure Amazon S3 Bucket Key. For information about default encryption, see Amazon S3 default bucket encryption in the Amazon S3 User Guide. For more information about S3 Bucket Keys, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  This action requires Amazon Web Services Signature Version 4. For more information, see  Authenticating Requests (Amazon Web Services Signature Version 4).   To use this operation, you must have permissions to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.   Related Resources     GetBucketEncryption     DeleteBucketEncryption   
    */
   putBucketEncryption(params: S3.Types.PutBucketEncryptionRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * This action uses the encryption subresource to configure default encryption and Amazon S3 Bucket Key for an existing bucket. Default encryption for a bucket can use server-side encryption with Amazon S3-managed keys (SSE-S3) or Amazon Web Services KMS customer master keys (SSE-KMS). If you specify default encryption using SSE-KMS, you can also configure Amazon S3 Bucket Key. For information about default encryption, see Amazon S3 default bucket encryption in the Amazon S3 User Guide. For more information about S3 Bucket Keys, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  This action requires Amazon Web Services Signature Version 4. For more information, see  Authenticating Requests (Amazon Web Services Signature Version 4).   To use this operation, you must have permissions to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.   Related Resources     GetBucketEncryption     DeleteBucketEncryption   
+   * This action uses the encryption subresource to configure default encryption and Amazon S3 Bucket Key for an existing bucket. Default encryption for a bucket can use server-side encryption with Amazon S3-managed keys (SSE-S3) or customer managed keys (SSE-KMS). If you specify default encryption using SSE-KMS, you can also configure Amazon S3 Bucket Key. For information about default encryption, see Amazon S3 default bucket encryption in the Amazon S3 User Guide. For more information about S3 Bucket Keys, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  This action requires Amazon Web Services Signature Version 4. For more information, see  Authenticating Requests (Amazon Web Services Signature Version 4).   To use this operation, you must have permissions to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.   Related Resources     GetBucketEncryption     DeleteBucketEncryption   
    */
   putBucketEncryption(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Puts a S3 Intelligent-Tiering configuration to the specified bucket. You can have up to 1,000 S3 Intelligent-Tiering configurations per bucket. The S3 Intelligent-Tiering storage class is designed to optimize storage costs by automatically moving data to the most cost-effective storage access tier, without additional operational overhead. S3 Intelligent-Tiering delivers automatic cost savings by moving data between access tiers, when access patterns change. The S3 Intelligent-Tiering storage class is suitable for objects larger than 128 KB that you plan to store for at least 30 days. If the size of an object is less than 128 KB, it is not eligible for auto-tiering. Smaller objects can be stored, but they are always charged at the frequent access tier rates in the S3 Intelligent-Tiering storage class.  If you delete an object before the end of the 30-day minimum storage duration period, you are charged for 30 days. For more information, see Storage class for automatically optimizing frequently and infrequently accessed objects. Operations related to PutBucketIntelligentTieringConfiguration include:     DeleteBucketIntelligentTieringConfiguration     GetBucketIntelligentTieringConfiguration     ListBucketIntelligentTieringConfigurations     You only need S3 Intelligent-Tiering enabled on a bucket if you want to automatically move objects stored in the S3 Intelligent-Tiering storage class to the Archive Access or Deep Archive Access tier.   Special Errors     HTTP 400 Bad Request Error     Code: InvalidArgument    Cause: Invalid Argument      HTTP 400 Bad Request Error     Code: TooManyConfigurations    Cause: You are attempting to create a new configuration but have already reached the 1,000-configuration limit.       HTTP 403 Forbidden Error     Code: AccessDenied    Cause: You are not the owner of the specified bucket, or you do not have the s3:PutIntelligentTieringConfiguration bucket permission to set the configuration on the bucket.     
+   * Puts a S3 Intelligent-Tiering configuration to the specified bucket. You can have up to 1,000 S3 Intelligent-Tiering configurations per bucket. The S3 Intelligent-Tiering storage class is designed to optimize storage costs by automatically moving data to the most cost-effective storage access tier, without performance impact or operational overhead. S3 Intelligent-Tiering delivers automatic cost savings in three low latency and high throughput access tiers. To get the lowest storage cost on data that can be accessed in minutes to hours, you can choose to activate additional archiving capabilities. The S3 Intelligent-Tiering storage class is the ideal storage class for data with unknown, changing, or unpredictable access patterns, independent of object size or retention period. If the size of an object is less than 128 KB, it is not monitored and not eligible for auto-tiering. Smaller objects can be stored, but they are always charged at the Frequent Access tier rates in the S3 Intelligent-Tiering storage class. For more information, see Storage class for automatically optimizing frequently and infrequently accessed objects. Operations related to PutBucketIntelligentTieringConfiguration include:     DeleteBucketIntelligentTieringConfiguration     GetBucketIntelligentTieringConfiguration     ListBucketIntelligentTieringConfigurations     You only need S3 Intelligent-Tiering enabled on a bucket if you want to automatically move objects stored in the S3 Intelligent-Tiering storage class to the Archive Access or Deep Archive Access tier.   Special Errors     HTTP 400 Bad Request Error     Code: InvalidArgument    Cause: Invalid Argument      HTTP 400 Bad Request Error     Code: TooManyConfigurations    Cause: You are attempting to create a new configuration but have already reached the 1,000-configuration limit.       HTTP 403 Forbidden Error     Code: AccessDenied    Cause: You are not the owner of the specified bucket, or you do not have the s3:PutIntelligentTieringConfiguration bucket permission to set the configuration on the bucket.     
    */
   putBucketIntelligentTieringConfiguration(params: S3.Types.PutBucketIntelligentTieringConfigurationRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Puts a S3 Intelligent-Tiering configuration to the specified bucket. You can have up to 1,000 S3 Intelligent-Tiering configurations per bucket. The S3 Intelligent-Tiering storage class is designed to optimize storage costs by automatically moving data to the most cost-effective storage access tier, without additional operational overhead. S3 Intelligent-Tiering delivers automatic cost savings by moving data between access tiers, when access patterns change. The S3 Intelligent-Tiering storage class is suitable for objects larger than 128 KB that you plan to store for at least 30 days. If the size of an object is less than 128 KB, it is not eligible for auto-tiering. Smaller objects can be stored, but they are always charged at the frequent access tier rates in the S3 Intelligent-Tiering storage class.  If you delete an object before the end of the 30-day minimum storage duration period, you are charged for 30 days. For more information, see Storage class for automatically optimizing frequently and infrequently accessed objects. Operations related to PutBucketIntelligentTieringConfiguration include:     DeleteBucketIntelligentTieringConfiguration     GetBucketIntelligentTieringConfiguration     ListBucketIntelligentTieringConfigurations     You only need S3 Intelligent-Tiering enabled on a bucket if you want to automatically move objects stored in the S3 Intelligent-Tiering storage class to the Archive Access or Deep Archive Access tier.   Special Errors     HTTP 400 Bad Request Error     Code: InvalidArgument    Cause: Invalid Argument      HTTP 400 Bad Request Error     Code: TooManyConfigurations    Cause: You are attempting to create a new configuration but have already reached the 1,000-configuration limit.       HTTP 403 Forbidden Error     Code: AccessDenied    Cause: You are not the owner of the specified bucket, or you do not have the s3:PutIntelligentTieringConfiguration bucket permission to set the configuration on the bucket.     
+   * Puts a S3 Intelligent-Tiering configuration to the specified bucket. You can have up to 1,000 S3 Intelligent-Tiering configurations per bucket. The S3 Intelligent-Tiering storage class is designed to optimize storage costs by automatically moving data to the most cost-effective storage access tier, without performance impact or operational overhead. S3 Intelligent-Tiering delivers automatic cost savings in three low latency and high throughput access tiers. To get the lowest storage cost on data that can be accessed in minutes to hours, you can choose to activate additional archiving capabilities. The S3 Intelligent-Tiering storage class is the ideal storage class for data with unknown, changing, or unpredictable access patterns, independent of object size or retention period. If the size of an object is less than 128 KB, it is not monitored and not eligible for auto-tiering. Smaller objects can be stored, but they are always charged at the Frequent Access tier rates in the S3 Intelligent-Tiering storage class. For more information, see Storage class for automatically optimizing frequently and infrequently accessed objects. Operations related to PutBucketIntelligentTieringConfiguration include:     DeleteBucketIntelligentTieringConfiguration     GetBucketIntelligentTieringConfiguration     ListBucketIntelligentTieringConfigurations     You only need S3 Intelligent-Tiering enabled on a bucket if you want to automatically move objects stored in the S3 Intelligent-Tiering storage class to the Archive Access or Deep Archive Access tier.   Special Errors     HTTP 400 Bad Request Error     Code: InvalidArgument    Cause: Invalid Argument      HTTP 400 Bad Request Error     Code: TooManyConfigurations    Cause: You are attempting to create a new configuration but have already reached the 1,000-configuration limit.       HTTP 403 Forbidden Error     Code: AccessDenied    Cause: You are not the owner of the specified bucket, or you do not have the s3:PutIntelligentTieringConfiguration bucket permission to set the configuration on the bucket.     
    */
   putBucketIntelligentTieringConfiguration(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -598,19 +598,19 @@ declare class S3 extends S3Customizations {
    */
   putBucketLifecycleConfiguration(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Set the logging parameters for a bucket and to specify permissions for who can view and modify the logging parameters. All logs are saved to buckets in the same Amazon Web Services Region as the source bucket. To set the logging status of a bucket, you must be the bucket owner. The bucket owner is automatically granted FULL_CONTROL to all logs. You use the Grantee request element to grant access to other people. The Permissions request element specifies the kind of access the grantee has to the logs.  Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request.   By Email address:   &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;&lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;    To enable logging, you use LoggingEnabled and its children request elements. To disable logging, you use an empty BucketLoggingStatus request element:  &lt;BucketLoggingStatus xmlns="http://doc.s3.amazonaws.com/2006-03-01" /&gt;  For more information about server access logging, see Server Access Logging.  For more information about creating a bucket, see CreateBucket. For more information about returning the logging status of a bucket, see GetBucketLogging. The following operations are related to PutBucketLogging:    PutObject     DeleteBucket     CreateBucket     GetBucketLogging   
+   * Set the logging parameters for a bucket and to specify permissions for who can view and modify the logging parameters. All logs are saved to buckets in the same Amazon Web Services Region as the source bucket. To set the logging status of a bucket, you must be the bucket owner. The bucket owner is automatically granted FULL_CONTROL to all logs. You use the Grantee request element to grant access to other people. The Permissions request element specifies the kind of access the grantee has to the logs.  If the target bucket for log delivery uses the bucket owner enforced setting for S3 Object Ownership, you can't use the Grantee request element to grant access to others. Permissions can only be granted using policies. For more information, see Permissions for server access log delivery in the Amazon S3 User Guide.   Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request.   By Email address:   &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;&lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;    To enable logging, you use LoggingEnabled and its children request elements. To disable logging, you use an empty BucketLoggingStatus request element:  &lt;BucketLoggingStatus xmlns="http://doc.s3.amazonaws.com/2006-03-01" /&gt;  For more information about server access logging, see Server Access Logging in the Amazon S3 User Guide.  For more information about creating a bucket, see CreateBucket. For more information about returning the logging status of a bucket, see GetBucketLogging. The following operations are related to PutBucketLogging:    PutObject     DeleteBucket     CreateBucket     GetBucketLogging   
    */
   putBucketLogging(params: S3.Types.PutBucketLoggingRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Set the logging parameters for a bucket and to specify permissions for who can view and modify the logging parameters. All logs are saved to buckets in the same Amazon Web Services Region as the source bucket. To set the logging status of a bucket, you must be the bucket owner. The bucket owner is automatically granted FULL_CONTROL to all logs. You use the Grantee request element to grant access to other people. The Permissions request element specifies the kind of access the grantee has to the logs.  Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request.   By Email address:   &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;&lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;    To enable logging, you use LoggingEnabled and its children request elements. To disable logging, you use an empty BucketLoggingStatus request element:  &lt;BucketLoggingStatus xmlns="http://doc.s3.amazonaws.com/2006-03-01" /&gt;  For more information about server access logging, see Server Access Logging.  For more information about creating a bucket, see CreateBucket. For more information about returning the logging status of a bucket, see GetBucketLogging. The following operations are related to PutBucketLogging:    PutObject     DeleteBucket     CreateBucket     GetBucketLogging   
+   * Set the logging parameters for a bucket and to specify permissions for who can view and modify the logging parameters. All logs are saved to buckets in the same Amazon Web Services Region as the source bucket. To set the logging status of a bucket, you must be the bucket owner. The bucket owner is automatically granted FULL_CONTROL to all logs. You use the Grantee request element to grant access to other people. The Permissions request element specifies the kind of access the grantee has to the logs.  If the target bucket for log delivery uses the bucket owner enforced setting for S3 Object Ownership, you can't use the Grantee request element to grant access to others. Permissions can only be granted using policies. For more information, see Permissions for server access log delivery in the Amazon S3 User Guide.   Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request.   By Email address:   &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;&lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;    To enable logging, you use LoggingEnabled and its children request elements. To disable logging, you use an empty BucketLoggingStatus request element:  &lt;BucketLoggingStatus xmlns="http://doc.s3.amazonaws.com/2006-03-01" /&gt;  For more information about server access logging, see Server Access Logging in the Amazon S3 User Guide.  For more information about creating a bucket, see CreateBucket. For more information about returning the logging status of a bucket, see GetBucketLogging. The following operations are related to PutBucketLogging:    PutObject     DeleteBucket     CreateBucket     GetBucketLogging   
    */
   putBucketLogging(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Sets a metrics configuration (specified by the metrics configuration ID) for the bucket. You can have up to 1,000 metrics configurations per bucket. If you're updating an existing metrics configuration, note that this is a full replacement of the existing metrics configuration. If you don't include the elements you want to keep, they are erased. To use this operation, you must have permissions to perform the s3:PutMetricsConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources. For information about CloudWatch request metrics for Amazon S3, see Monitoring Metrics with Amazon CloudWatch. The following operations are related to PutBucketMetricsConfiguration:    DeleteBucketMetricsConfiguration     PutBucketMetricsConfiguration     ListBucketMetricsConfigurations     GetBucketLifecycle has the following special error:   Error code: TooManyConfigurations    Description: You are attempting to create a new configuration but have already reached the 1,000-configuration limit.   HTTP Status Code: HTTP 400 Bad Request    
+   * Sets a metrics configuration (specified by the metrics configuration ID) for the bucket. You can have up to 1,000 metrics configurations per bucket. If you're updating an existing metrics configuration, note that this is a full replacement of the existing metrics configuration. If you don't include the elements you want to keep, they are erased. To use this operation, you must have permissions to perform the s3:PutMetricsConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources. For information about CloudWatch request metrics for Amazon S3, see Monitoring Metrics with Amazon CloudWatch. The following operations are related to PutBucketMetricsConfiguration:    DeleteBucketMetricsConfiguration     GetBucketMetricsConfiguration     ListBucketMetricsConfigurations     GetBucketLifecycle has the following special error:   Error code: TooManyConfigurations    Description: You are attempting to create a new configuration but have already reached the 1,000-configuration limit.   HTTP Status Code: HTTP 400 Bad Request    
    */
   putBucketMetricsConfiguration(params: S3.Types.PutBucketMetricsConfigurationRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Sets a metrics configuration (specified by the metrics configuration ID) for the bucket. You can have up to 1,000 metrics configurations per bucket. If you're updating an existing metrics configuration, note that this is a full replacement of the existing metrics configuration. If you don't include the elements you want to keep, they are erased. To use this operation, you must have permissions to perform the s3:PutMetricsConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources. For information about CloudWatch request metrics for Amazon S3, see Monitoring Metrics with Amazon CloudWatch. The following operations are related to PutBucketMetricsConfiguration:    DeleteBucketMetricsConfiguration     PutBucketMetricsConfiguration     ListBucketMetricsConfigurations     GetBucketLifecycle has the following special error:   Error code: TooManyConfigurations    Description: You are attempting to create a new configuration but have already reached the 1,000-configuration limit.   HTTP Status Code: HTTP 400 Bad Request    
+   * Sets a metrics configuration (specified by the metrics configuration ID) for the bucket. You can have up to 1,000 metrics configurations per bucket. If you're updating an existing metrics configuration, note that this is a full replacement of the existing metrics configuration. If you don't include the elements you want to keep, they are erased. To use this operation, you must have permissions to perform the s3:PutMetricsConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources. For information about CloudWatch request metrics for Amazon S3, see Monitoring Metrics with Amazon CloudWatch. The following operations are related to PutBucketMetricsConfiguration:    DeleteBucketMetricsConfiguration     GetBucketMetricsConfiguration     ListBucketMetricsConfigurations     GetBucketLifecycle has the following special error:   Error code: TooManyConfigurations    Description: You are attempting to create a new configuration but have already reached the 1,000-configuration limit.   HTTP Status Code: HTTP 400 Bad Request    
    */
   putBucketMetricsConfiguration(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -630,11 +630,11 @@ declare class S3 extends S3Customizations {
    */
   putBucketNotificationConfiguration(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Creates or modifies OwnershipControls for an Amazon S3 bucket. To use this operation, you must have the s3:PutBucketOwnershipControls permission. For more information about Amazon S3 permissions, see Specifying Permissions in a Policy.  For information about Amazon S3 Object Ownership, see Using Object Ownership.  The following operations are related to PutBucketOwnershipControls:    GetBucketOwnershipControls     DeleteBucketOwnershipControls   
+   * Creates or modifies OwnershipControls for an Amazon S3 bucket. To use this operation, you must have the s3:PutBucketOwnershipControls permission. For more information about Amazon S3 permissions, see Specifying permissions in a policy.  For information about Amazon S3 Object Ownership, see Using object ownership.  The following operations are related to PutBucketOwnershipControls:    GetBucketOwnershipControls     DeleteBucketOwnershipControls   
    */
   putBucketOwnershipControls(params: S3.Types.PutBucketOwnershipControlsRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Creates or modifies OwnershipControls for an Amazon S3 bucket. To use this operation, you must have the s3:PutBucketOwnershipControls permission. For more information about Amazon S3 permissions, see Specifying Permissions in a Policy.  For information about Amazon S3 Object Ownership, see Using Object Ownership.  The following operations are related to PutBucketOwnershipControls:    GetBucketOwnershipControls     DeleteBucketOwnershipControls   
+   * Creates or modifies OwnershipControls for an Amazon S3 bucket. To use this operation, you must have the s3:PutBucketOwnershipControls permission. For more information about Amazon S3 permissions, see Specifying permissions in a policy.  For information about Amazon S3 Object Ownership, see Using object ownership.  The following operations are related to PutBucketOwnershipControls:    GetBucketOwnershipControls     DeleteBucketOwnershipControls   
    */
   putBucketOwnershipControls(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -646,11 +646,11 @@ declare class S3 extends S3Customizations {
    */
   putBucketPolicy(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   *  Creates a replication configuration or replaces an existing one. For more information, see Replication in the Amazon S3 User Guide.  Specify the replication configuration in the request body. In the replication configuration, you provide the name of the destination bucket or buckets where you want Amazon S3 to replicate objects, the IAM role that Amazon S3 can assume to replicate objects on your behalf, and other relevant information. A replication configuration must include at least one rule, and can contain a maximum of 1,000. Each rule identifies a subset of objects to replicate by filtering the objects in the source bucket. To choose additional subsets of objects to replicate, add a rule for each subset. To specify a subset of the objects in the source bucket to apply a replication rule to, add the Filter element as a child of the Rule element. You can filter objects based on an object key prefix, one or more object tags, or both. When you add the Filter element in the configuration, you must also add the following elements: DeleteMarkerReplication, Status, and Priority.  If you are using an earlier version of the replication configuration, Amazon S3 handles replication of delete markers differently. For more information, see Backward Compatibility.  For information about enabling versioning on a bucket, see Using Versioning.  Handling Replication of Encrypted Objects  By default, Amazon S3 doesn't replicate objects that are stored at rest using server-side encryption with CMKs stored in Amazon Web Services KMS. To replicate Amazon Web Services KMS-encrypted objects, add the following: SourceSelectionCriteria, SseKmsEncryptedObjects, Status, EncryptionConfiguration, and ReplicaKmsKeyID. For information about replication configuration, see Replicating Objects Created with SSE Using CMKs stored in Amazon Web Services KMS. For information on PutBucketReplication errors, see List of replication-related error codes   Permissions  To create a PutBucketReplication request, you must have s3:PutReplicationConfiguration permissions for the bucket.  By default, a resource owner, in this case the Amazon Web Services account that created the bucket, can perform this operation. The resource owner can also grant others permissions to perform the operation. For more information about permissions, see Specifying Permissions in a Policy and Managing Access Permissions to Your Amazon S3 Resources.  To perform this operation, the user or role performing the action must have the iam:PassRole permission.  The following operations are related to PutBucketReplication:    GetBucketReplication     DeleteBucketReplication   
+   *  Creates a replication configuration or replaces an existing one. For more information, see Replication in the Amazon S3 User Guide.  Specify the replication configuration in the request body. In the replication configuration, you provide the name of the destination bucket or buckets where you want Amazon S3 to replicate objects, the IAM role that Amazon S3 can assume to replicate objects on your behalf, and other relevant information. A replication configuration must include at least one rule, and can contain a maximum of 1,000. Each rule identifies a subset of objects to replicate by filtering the objects in the source bucket. To choose additional subsets of objects to replicate, add a rule for each subset. To specify a subset of the objects in the source bucket to apply a replication rule to, add the Filter element as a child of the Rule element. You can filter objects based on an object key prefix, one or more object tags, or both. When you add the Filter element in the configuration, you must also add the following elements: DeleteMarkerReplication, Status, and Priority.  If you are using an earlier version of the replication configuration, Amazon S3 handles replication of delete markers differently. For more information, see Backward Compatibility.  For information about enabling versioning on a bucket, see Using Versioning.  Handling Replication of Encrypted Objects  By default, Amazon S3 doesn't replicate objects that are stored at rest using server-side encryption with KMS keys. To replicate Amazon Web Services KMS-encrypted objects, add the following: SourceSelectionCriteria, SseKmsEncryptedObjects, Status, EncryptionConfiguration, and ReplicaKmsKeyID. For information about replication configuration, see Replicating Objects Created with SSE Using KMS keys. For information on PutBucketReplication errors, see List of replication-related error codes   Permissions  To create a PutBucketReplication request, you must have s3:PutReplicationConfiguration permissions for the bucket.  By default, a resource owner, in this case the Amazon Web Services account that created the bucket, can perform this operation. The resource owner can also grant others permissions to perform the operation. For more information about permissions, see Specifying Permissions in a Policy and Managing Access Permissions to Your Amazon S3 Resources.  To perform this operation, the user or role performing the action must have the iam:PassRole permission.  The following operations are related to PutBucketReplication:    GetBucketReplication     DeleteBucketReplication   
    */
   putBucketReplication(params: S3.Types.PutBucketReplicationRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   *  Creates a replication configuration or replaces an existing one. For more information, see Replication in the Amazon S3 User Guide.  Specify the replication configuration in the request body. In the replication configuration, you provide the name of the destination bucket or buckets where you want Amazon S3 to replicate objects, the IAM role that Amazon S3 can assume to replicate objects on your behalf, and other relevant information. A replication configuration must include at least one rule, and can contain a maximum of 1,000. Each rule identifies a subset of objects to replicate by filtering the objects in the source bucket. To choose additional subsets of objects to replicate, add a rule for each subset. To specify a subset of the objects in the source bucket to apply a replication rule to, add the Filter element as a child of the Rule element. You can filter objects based on an object key prefix, one or more object tags, or both. When you add the Filter element in the configuration, you must also add the following elements: DeleteMarkerReplication, Status, and Priority.  If you are using an earlier version of the replication configuration, Amazon S3 handles replication of delete markers differently. For more information, see Backward Compatibility.  For information about enabling versioning on a bucket, see Using Versioning.  Handling Replication of Encrypted Objects  By default, Amazon S3 doesn't replicate objects that are stored at rest using server-side encryption with CMKs stored in Amazon Web Services KMS. To replicate Amazon Web Services KMS-encrypted objects, add the following: SourceSelectionCriteria, SseKmsEncryptedObjects, Status, EncryptionConfiguration, and ReplicaKmsKeyID. For information about replication configuration, see Replicating Objects Created with SSE Using CMKs stored in Amazon Web Services KMS. For information on PutBucketReplication errors, see List of replication-related error codes   Permissions  To create a PutBucketReplication request, you must have s3:PutReplicationConfiguration permissions for the bucket.  By default, a resource owner, in this case the Amazon Web Services account that created the bucket, can perform this operation. The resource owner can also grant others permissions to perform the operation. For more information about permissions, see Specifying Permissions in a Policy and Managing Access Permissions to Your Amazon S3 Resources.  To perform this operation, the user or role performing the action must have the iam:PassRole permission.  The following operations are related to PutBucketReplication:    GetBucketReplication     DeleteBucketReplication   
+   *  Creates a replication configuration or replaces an existing one. For more information, see Replication in the Amazon S3 User Guide.  Specify the replication configuration in the request body. In the replication configuration, you provide the name of the destination bucket or buckets where you want Amazon S3 to replicate objects, the IAM role that Amazon S3 can assume to replicate objects on your behalf, and other relevant information. A replication configuration must include at least one rule, and can contain a maximum of 1,000. Each rule identifies a subset of objects to replicate by filtering the objects in the source bucket. To choose additional subsets of objects to replicate, add a rule for each subset. To specify a subset of the objects in the source bucket to apply a replication rule to, add the Filter element as a child of the Rule element. You can filter objects based on an object key prefix, one or more object tags, or both. When you add the Filter element in the configuration, you must also add the following elements: DeleteMarkerReplication, Status, and Priority.  If you are using an earlier version of the replication configuration, Amazon S3 handles replication of delete markers differently. For more information, see Backward Compatibility.  For information about enabling versioning on a bucket, see Using Versioning.  Handling Replication of Encrypted Objects  By default, Amazon S3 doesn't replicate objects that are stored at rest using server-side encryption with KMS keys. To replicate Amazon Web Services KMS-encrypted objects, add the following: SourceSelectionCriteria, SseKmsEncryptedObjects, Status, EncryptionConfiguration, and ReplicaKmsKeyID. For information about replication configuration, see Replicating Objects Created with SSE Using KMS keys. For information on PutBucketReplication errors, see List of replication-related error codes   Permissions  To create a PutBucketReplication request, you must have s3:PutReplicationConfiguration permissions for the bucket.  By default, a resource owner, in this case the Amazon Web Services account that created the bucket, can perform this operation. The resource owner can also grant others permissions to perform the operation. For more information about permissions, see Specifying Permissions in a Policy and Managing Access Permissions to Your Amazon S3 Resources.  To perform this operation, the user or role performing the action must have the iam:PassRole permission.  The following operations are related to PutBucketReplication:    GetBucketReplication     DeleteBucketReplication   
    */
   putBucketReplication(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -686,19 +686,19 @@ declare class S3 extends S3Customizations {
    */
   putBucketWebsite(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Adds an object to a bucket. You must have WRITE permissions on a bucket to add an object to it. Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket. Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. Amazon S3 does not provide object locking; if you need this, make sure to build it into your application layer or use versioning instead. To ensure that data is not corrupted traversing the network, use the Content-MD5 header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, returns an error. Additionally, you can calculate the MD5 while putting an object to Amazon S3 and compare the returned ETag to the calculated MD5 value.    To successfully complete the PutObject request, you must have the s3:PutObject in your IAM permissions.   To successfully change the objects acl of your PutObject request, you must have the s3:PutObjectAcl in your IAM permissions.    The Content-MD5 header is required for any request to upload an object with a retention period configured using Amazon S3 Object Lock. For more information about Amazon S3 Object Lock, see Amazon S3 Object Lock Overview in the Amazon S3 User Guide.      Server-side Encryption  You can optionally request server-side encryption. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. You have the option to provide your own encryption key or use Amazon Web Services managed encryption keys (SSE-S3 or SSE-KMS). For more information, see Using Server-Side Encryption. If you request server-side encryption using Amazon Web Services Key Management Service (SSE-KMS), you can enable an S3 Bucket Key at the object-level. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  Access Control List (ACL)-Specific Request Headers  You can use headers to grant ACL- based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.   Storage Class Options  By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.  Versioning  If you enable versioning for a bucket, Amazon S3 automatically generates a unique version ID for the object being stored. Amazon S3 returns this ID in the response. When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all of the objects. For more information about versioning, see Adding Objects to Versioning Enabled Buckets. For information about returning the versioning state of a bucket, see GetBucketVersioning.   Related Resources     CopyObject     DeleteObject   
+   * Adds an object to a bucket. You must have WRITE permissions on a bucket to add an object to it. Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket. Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. Amazon S3 does not provide object locking; if you need this, make sure to build it into your application layer or use versioning instead. To ensure that data is not corrupted traversing the network, use the Content-MD5 header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, returns an error. Additionally, you can calculate the MD5 while putting an object to Amazon S3 and compare the returned ETag to the calculated MD5 value.    To successfully complete the PutObject request, you must have the s3:PutObject in your IAM permissions.   To successfully change the objects acl of your PutObject request, you must have the s3:PutObjectAcl in your IAM permissions.    The Content-MD5 header is required for any request to upload an object with a retention period configured using Amazon S3 Object Lock. For more information about Amazon S3 Object Lock, see Amazon S3 Object Lock Overview in the Amazon S3 User Guide.      Server-side Encryption  You can optionally request server-side encryption. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. You have the option to provide your own encryption key or use Amazon Web Services managed encryption keys (SSE-S3 or SSE-KMS). For more information, see Using Server-Side Encryption. If you request server-side encryption using Amazon Web Services Key Management Service (SSE-KMS), you can enable an S3 Bucket Key at the object-level. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  Access Control List (ACL)-Specific Request Headers  You can use headers to grant ACL- based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.  If the bucket that you're uploading objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. PUT requests that contain other ACLs (for example, custom grants to certain Amazon Web Services accounts) fail and return a 400 error with the error code AccessControlListNotSupported. For more information, see  Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.   Storage Class Options  By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.  Versioning  If you enable versioning for a bucket, Amazon S3 automatically generates a unique version ID for the object being stored. Amazon S3 returns this ID in the response. When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all of the objects. For more information about versioning, see Adding Objects to Versioning Enabled Buckets. For information about returning the versioning state of a bucket, see GetBucketVersioning.   Related Resources     CopyObject     DeleteObject   
    */
   putObject(params: S3.Types.PutObjectRequest, callback?: (err: AWSError, data: S3.Types.PutObjectOutput) => void): Request<S3.Types.PutObjectOutput, AWSError>;
   /**
-   * Adds an object to a bucket. You must have WRITE permissions on a bucket to add an object to it. Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket. Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. Amazon S3 does not provide object locking; if you need this, make sure to build it into your application layer or use versioning instead. To ensure that data is not corrupted traversing the network, use the Content-MD5 header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, returns an error. Additionally, you can calculate the MD5 while putting an object to Amazon S3 and compare the returned ETag to the calculated MD5 value.    To successfully complete the PutObject request, you must have the s3:PutObject in your IAM permissions.   To successfully change the objects acl of your PutObject request, you must have the s3:PutObjectAcl in your IAM permissions.    The Content-MD5 header is required for any request to upload an object with a retention period configured using Amazon S3 Object Lock. For more information about Amazon S3 Object Lock, see Amazon S3 Object Lock Overview in the Amazon S3 User Guide.      Server-side Encryption  You can optionally request server-side encryption. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. You have the option to provide your own encryption key or use Amazon Web Services managed encryption keys (SSE-S3 or SSE-KMS). For more information, see Using Server-Side Encryption. If you request server-side encryption using Amazon Web Services Key Management Service (SSE-KMS), you can enable an S3 Bucket Key at the object-level. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  Access Control List (ACL)-Specific Request Headers  You can use headers to grant ACL- based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.   Storage Class Options  By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.  Versioning  If you enable versioning for a bucket, Amazon S3 automatically generates a unique version ID for the object being stored. Amazon S3 returns this ID in the response. When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all of the objects. For more information about versioning, see Adding Objects to Versioning Enabled Buckets. For information about returning the versioning state of a bucket, see GetBucketVersioning.   Related Resources     CopyObject     DeleteObject   
+   * Adds an object to a bucket. You must have WRITE permissions on a bucket to add an object to it. Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket. Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. Amazon S3 does not provide object locking; if you need this, make sure to build it into your application layer or use versioning instead. To ensure that data is not corrupted traversing the network, use the Content-MD5 header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, returns an error. Additionally, you can calculate the MD5 while putting an object to Amazon S3 and compare the returned ETag to the calculated MD5 value.    To successfully complete the PutObject request, you must have the s3:PutObject in your IAM permissions.   To successfully change the objects acl of your PutObject request, you must have the s3:PutObjectAcl in your IAM permissions.    The Content-MD5 header is required for any request to upload an object with a retention period configured using Amazon S3 Object Lock. For more information about Amazon S3 Object Lock, see Amazon S3 Object Lock Overview in the Amazon S3 User Guide.      Server-side Encryption  You can optionally request server-side encryption. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. You have the option to provide your own encryption key or use Amazon Web Services managed encryption keys (SSE-S3 or SSE-KMS). For more information, see Using Server-Side Encryption. If you request server-side encryption using Amazon Web Services Key Management Service (SSE-KMS), you can enable an S3 Bucket Key at the object-level. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.  Access Control List (ACL)-Specific Request Headers  You can use headers to grant ACL- based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.  If the bucket that you're uploading objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. PUT requests that contain other ACLs (for example, custom grants to certain Amazon Web Services accounts) fail and return a 400 error with the error code AccessControlListNotSupported. For more information, see  Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.   Storage Class Options  By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.  Versioning  If you enable versioning for a bucket, Amazon S3 automatically generates a unique version ID for the object being stored. Amazon S3 returns this ID in the response. When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all of the objects. For more information about versioning, see Adding Objects to Versioning Enabled Buckets. For information about returning the versioning state of a bucket, see GetBucketVersioning.   Related Resources     CopyObject     DeleteObject   
    */
   putObject(callback?: (err: AWSError, data: S3.Types.PutObjectOutput) => void): Request<S3.Types.PutObjectOutput, AWSError>;
   /**
-   * Uses the acl subresource to set the access control list (ACL) permissions for a new or existing object in an S3 bucket. You must have WRITE_ACP permission to set the ACL of an object. For more information, see What permissions can I grant? in the Amazon S3 User Guide. This action is not supported by Amazon S3 on Outposts. Depending on your application needs, you can choose to set the ACL on an object using either the request body or the headers. For example, if you have an existing application that updates a bucket ACL using the request body, you can continue to use that approach. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.  Access Permissions  You can set access permissions using one of the following methods:   Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. Specify the canned ACL name as the value of x-amz-acl. If you use this header, you cannot use other access control-specific headers in your request. For more information, see Canned ACL.   Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. When using these headers, you specify explicit access permissions and grantees (Amazon Web Services accounts or Amazon S3 groups) who will receive the permission. If you use these ACL-specific headers, you cannot use x-amz-acl header to set a canned ACL. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-read header grants list objects permission to the two Amazon Web Services accounts identified by their email addresses.  x-amz-grant-read: emailAddress="xyz@amazon.com", emailAddress="abc@amazon.com"     You can use either a canned ACL or specify access permissions explicitly. You cannot do both.  Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request.   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;    By Email address:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.     Versioning  The ACL of an object is set at the object version level. By default, PUT sets the ACL of the current version of an object. To set the ACL of a different version, use the versionId subresource.  Related Resources     CopyObject     GetObject   
+   * Uses the acl subresource to set the access control list (ACL) permissions for a new or existing object in an S3 bucket. You must have WRITE_ACP permission to set the ACL of an object. For more information, see What permissions can I grant? in the Amazon S3 User Guide. This action is not supported by Amazon S3 on Outposts. Depending on your application needs, you can choose to set the ACL on an object using either the request body or the headers. For example, if you have an existing application that updates a bucket ACL using the request body, you can continue to use that approach. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. You must use policies to grant access to your bucket and the objects in it. Requests to set ACLs or update ACLs fail and return the AccessControlListNotSupported error code. Requests to read ACLs are still supported. For more information, see Controlling object ownership in the Amazon S3 User Guide.   Access Permissions  You can set access permissions using one of the following methods:   Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. Specify the canned ACL name as the value of x-amz-acl. If you use this header, you cannot use other access control-specific headers in your request. For more information, see Canned ACL.   Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. When using these headers, you specify explicit access permissions and grantees (Amazon Web Services accounts or Amazon S3 groups) who will receive the permission. If you use these ACL-specific headers, you cannot use x-amz-acl header to set a canned ACL. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-read header grants list objects permission to the two Amazon Web Services accounts identified by their email addresses.  x-amz-grant-read: emailAddress="xyz@amazon.com", emailAddress="abc@amazon.com"     You can use either a canned ACL or specify access permissions explicitly. You cannot do both.  Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request.   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;    By Email address:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.     Versioning  The ACL of an object is set at the object version level. By default, PUT sets the ACL of the current version of an object. To set the ACL of a different version, use the versionId subresource.  Related Resources     CopyObject     GetObject   
    */
   putObjectAcl(params: S3.Types.PutObjectAclRequest, callback?: (err: AWSError, data: S3.Types.PutObjectAclOutput) => void): Request<S3.Types.PutObjectAclOutput, AWSError>;
   /**
-   * Uses the acl subresource to set the access control list (ACL) permissions for a new or existing object in an S3 bucket. You must have WRITE_ACP permission to set the ACL of an object. For more information, see What permissions can I grant? in the Amazon S3 User Guide. This action is not supported by Amazon S3 on Outposts. Depending on your application needs, you can choose to set the ACL on an object using either the request body or the headers. For example, if you have an existing application that updates a bucket ACL using the request body, you can continue to use that approach. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.  Access Permissions  You can set access permissions using one of the following methods:   Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. Specify the canned ACL name as the value of x-amz-acl. If you use this header, you cannot use other access control-specific headers in your request. For more information, see Canned ACL.   Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. When using these headers, you specify explicit access permissions and grantees (Amazon Web Services accounts or Amazon S3 groups) who will receive the permission. If you use these ACL-specific headers, you cannot use x-amz-acl header to set a canned ACL. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-read header grants list objects permission to the two Amazon Web Services accounts identified by their email addresses.  x-amz-grant-read: emailAddress="xyz@amazon.com", emailAddress="abc@amazon.com"     You can use either a canned ACL or specify access permissions explicitly. You cannot do both.  Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request.   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;    By Email address:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.     Versioning  The ACL of an object is set at the object version level. By default, PUT sets the ACL of the current version of an object. To set the ACL of a different version, use the versionId subresource.  Related Resources     CopyObject     GetObject   
+   * Uses the acl subresource to set the access control list (ACL) permissions for a new or existing object in an S3 bucket. You must have WRITE_ACP permission to set the ACL of an object. For more information, see What permissions can I grant? in the Amazon S3 User Guide. This action is not supported by Amazon S3 on Outposts. Depending on your application needs, you can choose to set the ACL on an object using either the request body or the headers. For example, if you have an existing application that updates a bucket ACL using the request body, you can continue to use that approach. For more information, see Access Control List (ACL) Overview in the Amazon S3 User Guide.  If your bucket uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. You must use policies to grant access to your bucket and the objects in it. Requests to set ACLs or update ACLs fail and return the AccessControlListNotSupported error code. Requests to read ACLs are still supported. For more information, see Controlling object ownership in the Amazon S3 User Guide.   Access Permissions  You can set access permissions using one of the following methods:   Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. Specify the canned ACL name as the value of x-amz-acl. If you use this header, you cannot use other access control-specific headers in your request. For more information, see Canned ACL.   Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. When using these headers, you specify explicit access permissions and grantees (Amazon Web Services accounts or Amazon S3 groups) who will receive the permission. If you use these ACL-specific headers, you cannot use x-amz-acl header to set a canned ACL. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. You specify each grantee as a type=value pair, where the type is one of the following:    id – if the value specified is the canonical user ID of an Amazon Web Services account    uri – if you are granting permissions to a predefined group    emailAddress – if the value specified is the email address of an Amazon Web Services account  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.    For example, the following x-amz-grant-read header grants list objects permission to the two Amazon Web Services accounts identified by their email addresses.  x-amz-grant-read: emailAddress="xyz@amazon.com", emailAddress="abc@amazon.com"     You can use either a canned ACL or specify access permissions explicitly. You cannot do both.  Grantee Values  You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:   By the person's ID:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser"&gt;&lt;ID&gt;&lt;&gt;ID&lt;&gt;&lt;/ID&gt;&lt;DisplayName&gt;&lt;&gt;GranteesEmail&lt;&gt;&lt;/DisplayName&gt; &lt;/Grantee&gt;  DisplayName is optional and ignored in the request.   By URI:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="Group"&gt;&lt;URI&gt;&lt;&gt;http://acs.amazonaws.com/groups/global/AuthenticatedUsers&lt;&gt;&lt;/URI&gt;&lt;/Grantee&gt;    By Email address:  &lt;Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="AmazonCustomerByEmail"&gt;&lt;EmailAddress&gt;&lt;&gt;Grantees@email.com&lt;&gt;&lt;/EmailAddress&gt;lt;/Grantee&gt;  The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.  Using email addresses to specify a grantee is only supported in the following Amazon Web Services Regions:    US East (N. Virginia)   US West (N. California)    US West (Oregon)    Asia Pacific (Singapore)   Asia Pacific (Sydney)   Asia Pacific (Tokyo)   Europe (Ireland)   South America (São Paulo)   For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the Amazon Web Services General Reference.     Versioning  The ACL of an object is set at the object version level. By default, PUT sets the ACL of the current version of an object. To set the ACL of a different version, use the versionId subresource.  Related Resources     CopyObject     GetObject   
    */
   putObjectAcl(callback?: (err: AWSError, data: S3.Types.PutObjectAclOutput) => void): Request<S3.Types.PutObjectAclOutput, AWSError>;
   /**
@@ -750,11 +750,11 @@ declare class S3 extends S3Customizations {
    */
   restoreObject(callback?: (err: AWSError, data: S3.Types.RestoreObjectOutput) => void): Request<S3.Types.RestoreObjectOutput, AWSError>;
   /**
-   * This action filters the contents of an Amazon S3 object based on a simple structured query language (SQL) statement. In the request, along with the SQL expression, you must also specify a data serialization format (JSON, CSV, or Apache Parquet) of the object. Amazon S3 uses this format to parse object data into records, and returns only records that match the specified SQL expression. You must also specify the data serialization format for the response. This action is not supported by Amazon S3 on Outposts. For more information about Amazon S3 Select, see Selecting Content from Objects in the Amazon S3 User Guide. For more information about using SQL with Amazon S3 Select, see  SQL Reference for Amazon S3 Select and S3 Glacier Select in the Amazon S3 User Guide.   Permissions  You must have s3:GetObject permission for this operation. Amazon S3 Select does not support anonymous access. For more information about permissions, see Specifying Permissions in a Policy in the Amazon S3 User Guide.   Object Data Formats  You can use Amazon S3 Select to query objects that have the following format properties:    CSV, JSON, and Parquet - Objects must be in CSV, JSON, or Parquet format.    UTF-8 - UTF-8 is the only encoding type Amazon S3 Select supports.    GZIP or BZIP2 - CSV and JSON files can be compressed using GZIP or BZIP2. GZIP and BZIP2 are the only compression formats that Amazon S3 Select supports for CSV and JSON files. Amazon S3 Select supports columnar compression for Parquet using GZIP or Snappy. Amazon S3 Select does not support whole-object compression for Parquet objects.    Server-side encryption - Amazon S3 Select supports querying objects that are protected with server-side encryption. For objects that are encrypted with customer-provided encryption keys (SSE-C), you must use HTTPS, and you must use the headers that are documented in the GetObject. For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide. For objects that are encrypted with Amazon S3 managed encryption keys (SSE-S3) and customer master keys (CMKs) stored in Amazon Web Services Key Management Service (SSE-KMS), server-side encryption is handled transparently, so you don't need to specify anything. For more information about server-side encryption, including SSE-S3 and SSE-KMS, see Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide.    Working with the Response Body  Given the response size is unknown, Amazon S3 Select streams the response as a series of messages and includes a Transfer-Encoding header with chunked as its value in the response. For more information, see Appendix: SelectObjectContent Response.   GetObject Support  The SelectObjectContent action does not support the following GetObject functionality. For more information, see GetObject.    Range: Although you can specify a scan range for an Amazon S3 Select request (see SelectObjectContentRequest - ScanRange in the request parameters), you cannot specify the range of bytes of an object to return.    GLACIER, DEEP_ARCHIVE and REDUCED_REDUNDANCY storage classes: You cannot specify the GLACIER, DEEP_ARCHIVE, or REDUCED_REDUNDANCY storage classes. For more information, about storage classes see Storage Classes in the Amazon S3 User Guide.     Special Errors  For a list of special errors for this operation, see List of SELECT Object Content Error Codes   Related Resources     GetObject     GetBucketLifecycleConfiguration     PutBucketLifecycleConfiguration   
+   * This action filters the contents of an Amazon S3 object based on a simple structured query language (SQL) statement. In the request, along with the SQL expression, you must also specify a data serialization format (JSON, CSV, or Apache Parquet) of the object. Amazon S3 uses this format to parse object data into records, and returns only records that match the specified SQL expression. You must also specify the data serialization format for the response. This action is not supported by Amazon S3 on Outposts. For more information about Amazon S3 Select, see Selecting Content from Objects in the Amazon S3 User Guide. For more information about using SQL with Amazon S3 Select, see  SQL Reference for Amazon S3 Select and S3 Glacier Select in the Amazon S3 User Guide.   Permissions  You must have s3:GetObject permission for this operation. Amazon S3 Select does not support anonymous access. For more information about permissions, see Specifying Permissions in a Policy in the Amazon S3 User Guide.   Object Data Formats  You can use Amazon S3 Select to query objects that have the following format properties:    CSV, JSON, and Parquet - Objects must be in CSV, JSON, or Parquet format.    UTF-8 - UTF-8 is the only encoding type Amazon S3 Select supports.    GZIP or BZIP2 - CSV and JSON files can be compressed using GZIP or BZIP2. GZIP and BZIP2 are the only compression formats that Amazon S3 Select supports for CSV and JSON files. Amazon S3 Select supports columnar compression for Parquet using GZIP or Snappy. Amazon S3 Select does not support whole-object compression for Parquet objects.    Server-side encryption - Amazon S3 Select supports querying objects that are protected with server-side encryption. For objects that are encrypted with customer-provided encryption keys (SSE-C), you must use HTTPS, and you must use the headers that are documented in the GetObject. For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide. For objects that are encrypted with Amazon S3 managed encryption keys (SSE-S3) and Amazon Web Services KMS keys (SSE-KMS), server-side encryption is handled transparently, so you don't need to specify anything. For more information about server-side encryption, including SSE-S3 and SSE-KMS, see Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide.    Working with the Response Body  Given the response size is unknown, Amazon S3 Select streams the response as a series of messages and includes a Transfer-Encoding header with chunked as its value in the response. For more information, see Appendix: SelectObjectContent Response.   GetObject Support  The SelectObjectContent action does not support the following GetObject functionality. For more information, see GetObject.    Range: Although you can specify a scan range for an Amazon S3 Select request (see SelectObjectContentRequest - ScanRange in the request parameters), you cannot specify the range of bytes of an object to return.    GLACIER, DEEP_ARCHIVE and REDUCED_REDUNDANCY storage classes: You cannot specify the GLACIER, DEEP_ARCHIVE, or REDUCED_REDUNDANCY storage classes. For more information, about storage classes see Storage Classes in the Amazon S3 User Guide.     Special Errors  For a list of special errors for this operation, see List of SELECT Object Content Error Codes   Related Resources     GetObject     GetBucketLifecycleConfiguration     PutBucketLifecycleConfiguration   
    */
   selectObjectContent(params: S3.Types.SelectObjectContentRequest, callback?: (err: AWSError, data: S3.Types.SelectObjectContentOutput) => void): Request<S3.Types.SelectObjectContentOutput, AWSError>;
   /**
-   * This action filters the contents of an Amazon S3 object based on a simple structured query language (SQL) statement. In the request, along with the SQL expression, you must also specify a data serialization format (JSON, CSV, or Apache Parquet) of the object. Amazon S3 uses this format to parse object data into records, and returns only records that match the specified SQL expression. You must also specify the data serialization format for the response. This action is not supported by Amazon S3 on Outposts. For more information about Amazon S3 Select, see Selecting Content from Objects in the Amazon S3 User Guide. For more information about using SQL with Amazon S3 Select, see  SQL Reference for Amazon S3 Select and S3 Glacier Select in the Amazon S3 User Guide.   Permissions  You must have s3:GetObject permission for this operation. Amazon S3 Select does not support anonymous access. For more information about permissions, see Specifying Permissions in a Policy in the Amazon S3 User Guide.   Object Data Formats  You can use Amazon S3 Select to query objects that have the following format properties:    CSV, JSON, and Parquet - Objects must be in CSV, JSON, or Parquet format.    UTF-8 - UTF-8 is the only encoding type Amazon S3 Select supports.    GZIP or BZIP2 - CSV and JSON files can be compressed using GZIP or BZIP2. GZIP and BZIP2 are the only compression formats that Amazon S3 Select supports for CSV and JSON files. Amazon S3 Select supports columnar compression for Parquet using GZIP or Snappy. Amazon S3 Select does not support whole-object compression for Parquet objects.    Server-side encryption - Amazon S3 Select supports querying objects that are protected with server-side encryption. For objects that are encrypted with customer-provided encryption keys (SSE-C), you must use HTTPS, and you must use the headers that are documented in the GetObject. For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide. For objects that are encrypted with Amazon S3 managed encryption keys (SSE-S3) and customer master keys (CMKs) stored in Amazon Web Services Key Management Service (SSE-KMS), server-side encryption is handled transparently, so you don't need to specify anything. For more information about server-side encryption, including SSE-S3 and SSE-KMS, see Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide.    Working with the Response Body  Given the response size is unknown, Amazon S3 Select streams the response as a series of messages and includes a Transfer-Encoding header with chunked as its value in the response. For more information, see Appendix: SelectObjectContent Response.   GetObject Support  The SelectObjectContent action does not support the following GetObject functionality. For more information, see GetObject.    Range: Although you can specify a scan range for an Amazon S3 Select request (see SelectObjectContentRequest - ScanRange in the request parameters), you cannot specify the range of bytes of an object to return.    GLACIER, DEEP_ARCHIVE and REDUCED_REDUNDANCY storage classes: You cannot specify the GLACIER, DEEP_ARCHIVE, or REDUCED_REDUNDANCY storage classes. For more information, about storage classes see Storage Classes in the Amazon S3 User Guide.     Special Errors  For a list of special errors for this operation, see List of SELECT Object Content Error Codes   Related Resources     GetObject     GetBucketLifecycleConfiguration     PutBucketLifecycleConfiguration   
+   * This action filters the contents of an Amazon S3 object based on a simple structured query language (SQL) statement. In the request, along with the SQL expression, you must also specify a data serialization format (JSON, CSV, or Apache Parquet) of the object. Amazon S3 uses this format to parse object data into records, and returns only records that match the specified SQL expression. You must also specify the data serialization format for the response. This action is not supported by Amazon S3 on Outposts. For more information about Amazon S3 Select, see Selecting Content from Objects in the Amazon S3 User Guide. For more information about using SQL with Amazon S3 Select, see  SQL Reference for Amazon S3 Select and S3 Glacier Select in the Amazon S3 User Guide.   Permissions  You must have s3:GetObject permission for this operation. Amazon S3 Select does not support anonymous access. For more information about permissions, see Specifying Permissions in a Policy in the Amazon S3 User Guide.   Object Data Formats  You can use Amazon S3 Select to query objects that have the following format properties:    CSV, JSON, and Parquet - Objects must be in CSV, JSON, or Parquet format.    UTF-8 - UTF-8 is the only encoding type Amazon S3 Select supports.    GZIP or BZIP2 - CSV and JSON files can be compressed using GZIP or BZIP2. GZIP and BZIP2 are the only compression formats that Amazon S3 Select supports for CSV and JSON files. Amazon S3 Select supports columnar compression for Parquet using GZIP or Snappy. Amazon S3 Select does not support whole-object compression for Parquet objects.    Server-side encryption - Amazon S3 Select supports querying objects that are protected with server-side encryption. For objects that are encrypted with customer-provided encryption keys (SSE-C), you must use HTTPS, and you must use the headers that are documented in the GetObject. For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon S3 User Guide. For objects that are encrypted with Amazon S3 managed encryption keys (SSE-S3) and Amazon Web Services KMS keys (SSE-KMS), server-side encryption is handled transparently, so you don't need to specify anything. For more information about server-side encryption, including SSE-S3 and SSE-KMS, see Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide.    Working with the Response Body  Given the response size is unknown, Amazon S3 Select streams the response as a series of messages and includes a Transfer-Encoding header with chunked as its value in the response. For more information, see Appendix: SelectObjectContent Response.   GetObject Support  The SelectObjectContent action does not support the following GetObject functionality. For more information, see GetObject.    Range: Although you can specify a scan range for an Amazon S3 Select request (see SelectObjectContentRequest - ScanRange in the request parameters), you cannot specify the range of bytes of an object to return.    GLACIER, DEEP_ARCHIVE and REDUCED_REDUNDANCY storage classes: You cannot specify the GLACIER, DEEP_ARCHIVE, or REDUCED_REDUNDANCY storage classes. For more information, about storage classes see Storage Classes in the Amazon S3 User Guide.     Special Errors  For a list of special errors for this operation, see List of SELECT Object Content Error Codes   Related Resources     GetObject     GetBucketLifecycleConfiguration     PutBucketLifecycleConfiguration   
    */
   selectObjectContent(callback?: (err: AWSError, data: S3.Types.SelectObjectContentOutput) => void): Request<S3.Types.SelectObjectContentOutput, AWSError>;
   /**
@@ -774,11 +774,11 @@ declare class S3 extends S3Customizations {
    */
   uploadPartCopy(callback?: (err: AWSError, data: S3.Types.UploadPartCopyOutput) => void): Request<S3.Types.UploadPartCopyOutput, AWSError>;
   /**
-   * Passes transformed objects to a GetObject operation when using Object Lambda Access Points. For information about Object Lambda Access Points, see Transforming objects with Object Lambda Access Points in the Amazon S3 User Guide. This operation supports metadata that can be returned by GetObject, in addition to RequestRoute, RequestToken, StatusCode, ErrorCode, and ErrorMessage. The GetObject response metadata is supported so that the WriteGetObjectResponse caller, typically an Lambda function, can provide the same metadata when it internally invokes GetObject. When WriteGetObjectResponse is called by a customer-owned Lambda function, the metadata returned to the end user GetObject call might differ from what Amazon S3 would normally return. You can include any number of metadata headers. When including a metadata header, it should be prefaced with x-amz-meta. For example, x-amz-meta-my-custom-header: MyCustomValue. The primary use case for this is to forward GetObject metadata. Amazon Web Services provides some prebuilt Lambda functions that you can use with S3 Object Lambda to detect and redact personally identifiable information (PII) and decompress S3 objects. These Lambda functions are available in the Amazon Web Services Serverless Application Repository, and can be selected through the Amazon Web Services Management Console when you create your Object Lambda Access Point. Example 1: PII Access Control - This Lambda function uses Amazon Comprehend, a natural language processing (NLP) service using machine learning to find insights and relationships in text. It automatically detects personally identifiable information (PII) such as names, addresses, dates, credit card numbers, and social security numbers from documents in your Amazon S3 bucket.  Example 2: PII Redaction - This Lambda function uses Amazon Comprehend, a natural language processing (NLP) service using machine learning to find insights and relationships in text. It automatically redacts personally identifiable information (PII) such as names, addresses, dates, credit card numbers, and social security numbers from documents in your Amazon S3 bucket.  Example 3: Decompression - The Lambda function S3ObjectLambdaDecompression, is equipped to decompress objects stored in S3 in one of six compressed file formats including bzip2, gzip, snappy, zlib, zstandard and ZIP.  For information on how to view and use these functions, see Using Amazon Web Services built Lambda functions in the Amazon S3 User Guide.
+   * Passes transformed objects to a GetObject operation when using Object Lambda access points. For information about Object Lambda access points, see Transforming objects with Object Lambda access points in the Amazon S3 User Guide. This operation supports metadata that can be returned by GetObject, in addition to RequestRoute, RequestToken, StatusCode, ErrorCode, and ErrorMessage. The GetObject response metadata is supported so that the WriteGetObjectResponse caller, typically an Lambda function, can provide the same metadata when it internally invokes GetObject. When WriteGetObjectResponse is called by a customer-owned Lambda function, the metadata returned to the end user GetObject call might differ from what Amazon S3 would normally return. You can include any number of metadata headers. When including a metadata header, it should be prefaced with x-amz-meta. For example, x-amz-meta-my-custom-header: MyCustomValue. The primary use case for this is to forward GetObject metadata. Amazon Web Services provides some prebuilt Lambda functions that you can use with S3 Object Lambda to detect and redact personally identifiable information (PII) and decompress S3 objects. These Lambda functions are available in the Amazon Web Services Serverless Application Repository, and can be selected through the Amazon Web Services Management Console when you create your Object Lambda access point. Example 1: PII Access Control - This Lambda function uses Amazon Comprehend, a natural language processing (NLP) service using machine learning to find insights and relationships in text. It automatically detects personally identifiable information (PII) such as names, addresses, dates, credit card numbers, and social security numbers from documents in your Amazon S3 bucket.  Example 2: PII Redaction - This Lambda function uses Amazon Comprehend, a natural language processing (NLP) service using machine learning to find insights and relationships in text. It automatically redacts personally identifiable information (PII) such as names, addresses, dates, credit card numbers, and social security numbers from documents in your Amazon S3 bucket.  Example 3: Decompression - The Lambda function S3ObjectLambdaDecompression, is equipped to decompress objects stored in S3 in one of six compressed file formats including bzip2, gzip, snappy, zlib, zstandard and ZIP.  For information on how to view and use these functions, see Using Amazon Web Services built Lambda functions in the Amazon S3 User Guide.
    */
   writeGetObjectResponse(params: S3.Types.WriteGetObjectResponseRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Passes transformed objects to a GetObject operation when using Object Lambda Access Points. For information about Object Lambda Access Points, see Transforming objects with Object Lambda Access Points in the Amazon S3 User Guide. This operation supports metadata that can be returned by GetObject, in addition to RequestRoute, RequestToken, StatusCode, ErrorCode, and ErrorMessage. The GetObject response metadata is supported so that the WriteGetObjectResponse caller, typically an Lambda function, can provide the same metadata when it internally invokes GetObject. When WriteGetObjectResponse is called by a customer-owned Lambda function, the metadata returned to the end user GetObject call might differ from what Amazon S3 would normally return. You can include any number of metadata headers. When including a metadata header, it should be prefaced with x-amz-meta. For example, x-amz-meta-my-custom-header: MyCustomValue. The primary use case for this is to forward GetObject metadata. Amazon Web Services provides some prebuilt Lambda functions that you can use with S3 Object Lambda to detect and redact personally identifiable information (PII) and decompress S3 objects. These Lambda functions are available in the Amazon Web Services Serverless Application Repository, and can be selected through the Amazon Web Services Management Console when you create your Object Lambda Access Point. Example 1: PII Access Control - This Lambda function uses Amazon Comprehend, a natural language processing (NLP) service using machine learning to find insights and relationships in text. It automatically detects personally identifiable information (PII) such as names, addresses, dates, credit card numbers, and social security numbers from documents in your Amazon S3 bucket.  Example 2: PII Redaction - This Lambda function uses Amazon Comprehend, a natural language processing (NLP) service using machine learning to find insights and relationships in text. It automatically redacts personally identifiable information (PII) such as names, addresses, dates, credit card numbers, and social security numbers from documents in your Amazon S3 bucket.  Example 3: Decompression - The Lambda function S3ObjectLambdaDecompression, is equipped to decompress objects stored in S3 in one of six compressed file formats including bzip2, gzip, snappy, zlib, zstandard and ZIP.  For information on how to view and use these functions, see Using Amazon Web Services built Lambda functions in the Amazon S3 User Guide.
+   * Passes transformed objects to a GetObject operation when using Object Lambda access points. For information about Object Lambda access points, see Transforming objects with Object Lambda access points in the Amazon S3 User Guide. This operation supports metadata that can be returned by GetObject, in addition to RequestRoute, RequestToken, StatusCode, ErrorCode, and ErrorMessage. The GetObject response metadata is supported so that the WriteGetObjectResponse caller, typically an Lambda function, can provide the same metadata when it internally invokes GetObject. When WriteGetObjectResponse is called by a customer-owned Lambda function, the metadata returned to the end user GetObject call might differ from what Amazon S3 would normally return. You can include any number of metadata headers. When including a metadata header, it should be prefaced with x-amz-meta. For example, x-amz-meta-my-custom-header: MyCustomValue. The primary use case for this is to forward GetObject metadata. Amazon Web Services provides some prebuilt Lambda functions that you can use with S3 Object Lambda to detect and redact personally identifiable information (PII) and decompress S3 objects. These Lambda functions are available in the Amazon Web Services Serverless Application Repository, and can be selected through the Amazon Web Services Management Console when you create your Object Lambda access point. Example 1: PII Access Control - This Lambda function uses Amazon Comprehend, a natural language processing (NLP) service using machine learning to find insights and relationships in text. It automatically detects personally identifiable information (PII) such as names, addresses, dates, credit card numbers, and social security numbers from documents in your Amazon S3 bucket.  Example 2: PII Redaction - This Lambda function uses Amazon Comprehend, a natural language processing (NLP) service using machine learning to find insights and relationships in text. It automatically redacts personally identifiable information (PII) such as names, addresses, dates, credit card numbers, and social security numbers from documents in your Amazon S3 bucket.  Example 3: Decompression - The Lambda function S3ObjectLambdaDecompression, is equipped to decompress objects stored in S3 in one of six compressed file formats including bzip2, gzip, snappy, zlib, zstandard and ZIP.  For information on how to view and use these functions, see Using Amazon Web Services built Lambda functions in the Amazon S3 User Guide.
    */
   writeGetObjectResponse(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -872,6 +872,7 @@ declare namespace S3 {
      */
     Owner: OwnerOverride;
   }
+  export type AccessPointArn = string;
   export type AccountId = string;
   export type AllowQuotedRecordDelimiter = boolean;
   export type AllowedHeader = string;
@@ -1113,7 +1114,7 @@ declare namespace S3 {
      */
     ETag?: ETag;
     /**
-     * If you specified server-side encryption either with an Amazon S3-managed encryption key or an Amazon Web Services KMS customer master key (CMK) in your initiate multipart upload request, the response includes this header. It confirms the encryption algorithm that Amazon S3 used to encrypt the object.
+     * If you specified server-side encryption either with an Amazon S3-managed encryption key or an Amazon Web Services KMS key in your initiate multipart upload request, the response includes this header. It confirms the encryption algorithm that Amazon S3 used to encrypt the object.
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -1121,7 +1122,7 @@ declare namespace S3 {
      */
     VersionId?: ObjectVersionId;
     /**
-     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed customer master key (CMK) that was used for the object.
+     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key that was used for the object.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -1155,7 +1156,7 @@ declare namespace S3 {
   }
   export interface CompletedMultipartUpload {
     /**
-     * Array of CompletedPart data types.
+     * Array of CompletedPart data types. If you do not supply a valid Part with your request, the service sends back an HTTP 400 response.
      */
     Parts?: CompletedPartList;
   }
@@ -1221,7 +1222,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed customer master key (CMK) that was used for the object.
+     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key that was used for the object.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -1472,6 +1473,7 @@ declare namespace S3 {
      * Specifies whether you want S3 Object Lock to be enabled for the new bucket.
      */
     ObjectLockEnabledForBucket?: ObjectLockEnabledForBucket;
+    ObjectOwnership?: ObjectOwnership;
   }
   export interface CreateMultipartUploadOutput {
     /**
@@ -1507,7 +1509,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed customer master key (CMK) that was used for the object.
+     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key that was used for the object.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -1602,7 +1604,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * Specifies the ID of the symmetric customer managed Amazon Web Services KMS CMK to use for object encryption. All GET and PUT requests for an object protected by Amazon Web Services KMS will fail if not made via SSL or using SigV4. For information about configuring using any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.
+     * Specifies the ID of the symmetric customer managed key to use for object encryption. All GET and PUT requests for an object protected by Amazon Web Services KMS will fail if not made via SSL or using SigV4. For information about configuring using any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -2005,7 +2007,7 @@ declare namespace S3 {
      */
     EncryptionType: ServerSideEncryption;
     /**
-     * If the encryption type is aws:kms, this optional value specifies the ID of the symmetric customer managed Amazon Web Services KMS CMK to use for encryption of job results. Amazon S3 only supports symmetric CMKs. For more information, see Using symmetric and asymmetric keys in the Amazon Web Services Key Management Service Developer Guide.
+     * If the encryption type is aws:kms, this optional value specifies the ID of the symmetric customer managed key to use for encryption of job results. Amazon S3 only supports symmetric keys. For more information, see Using symmetric and asymmetric keys in the Amazon Web Services Key Management Service Developer Guide.
      */
     KMSKeyId?: SSEKMSKeyId;
     /**
@@ -2049,7 +2051,9 @@ declare namespace S3 {
   }
   export type ErrorMessage = string;
   export type Errors = Error[];
-  export type Event = "s3:ReducedRedundancyLostObject"|"s3:ObjectCreated:*"|"s3:ObjectCreated:Put"|"s3:ObjectCreated:Post"|"s3:ObjectCreated:Copy"|"s3:ObjectCreated:CompleteMultipartUpload"|"s3:ObjectRemoved:*"|"s3:ObjectRemoved:Delete"|"s3:ObjectRemoved:DeleteMarkerCreated"|"s3:ObjectRestore:*"|"s3:ObjectRestore:Post"|"s3:ObjectRestore:Completed"|"s3:Replication:*"|"s3:Replication:OperationFailedReplication"|"s3:Replication:OperationNotTracked"|"s3:Replication:OperationMissedThreshold"|"s3:Replication:OperationReplicatedAfterThreshold"|string;
+  export type Event = "s3:ReducedRedundancyLostObject"|"s3:ObjectCreated:*"|"s3:ObjectCreated:Put"|"s3:ObjectCreated:Post"|"s3:ObjectCreated:Copy"|"s3:ObjectCreated:CompleteMultipartUpload"|"s3:ObjectRemoved:*"|"s3:ObjectRemoved:Delete"|"s3:ObjectRemoved:DeleteMarkerCreated"|"s3:ObjectRestore:*"|"s3:ObjectRestore:Post"|"s3:ObjectRestore:Completed"|"s3:Replication:*"|"s3:Replication:OperationFailedReplication"|"s3:Replication:OperationNotTracked"|"s3:Replication:OperationMissedThreshold"|"s3:Replication:OperationReplicatedAfterThreshold"|"s3:ObjectRestore:Delete"|"s3:LifecycleTransition"|"s3:IntelligentTiering"|"s3:ObjectAcl:Put"|"s3:LifecycleExpiration:*"|"s3:LifecycleExpiration:Delete"|"s3:LifecycleExpiration:DeleteMarkerCreated"|"s3:ObjectTagging:*"|"s3:ObjectTagging:Put"|"s3:ObjectTagging:Delete"|string;
+  export interface EventBridgeConfiguration {
+  }
   export type EventList = Event[];
   export interface ExistingObjectReplication {
     /**
@@ -2296,7 +2300,7 @@ declare namespace S3 {
   }
   export interface GetBucketOwnershipControlsOutput {
     /**
-     * The OwnershipControls (BucketOwnerPreferred or ObjectWriter) currently in effect for this Amazon S3 bucket.
+     * The OwnershipControls (BucketOwnerEnforced, BucketOwnerPreferred, or ObjectWriter) currently in effect for this Amazon S3 bucket.
      */
     OwnershipControls?: OwnershipControls;
   }
@@ -2596,7 +2600,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed customer master key (CMK) that was used for the object.
+     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key that was used for the object.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -2635,7 +2639,7 @@ declare namespace S3 {
   }
   export interface GetObjectRequest {
     /**
-     * The bucket name containing the object.  When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide. When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.
+     * The bucket name containing the object.  When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide. When using an Object Lambda access point the hostname takes the form AccessPointName-AccountId.s3-object-lambda.Region.amazonaws.com. When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.
      */
     Bucket: BucketName;
     /**
@@ -2929,7 +2933,7 @@ declare namespace S3 {
      */
     WebsiteRedirectLocation?: WebsiteRedirectLocation;
     /**
-     * If the object is stored using server-side encryption either with an Amazon Web Services KMS customer master key (CMK) or an Amazon S3-managed encryption key, the response includes this header with the value of the server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
+     * If the object is stored using server-side encryption either with an Amazon Web Services KMS key or an Amazon S3-managed encryption key, the response includes this header with the value of the server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -2945,7 +2949,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed customer master key (CMK) that was used for the object.
+     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key that was used for the object.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -3304,6 +3308,14 @@ declare namespace S3 {
      * All of these tags must exist in the object's tag set in order for the rule to apply.
      */
     Tags?: TagSet;
+    /**
+     * Minimum object size to which the rule applies.
+     */
+    ObjectSizeGreaterThan?: ObjectSizeGreaterThanBytes;
+    /**
+     * Maximum object size to which the rule applies.
+     */
+    ObjectSizeLessThan?: ObjectSizeLessThanBytes;
   }
   export interface LifecycleRuleFilter {
     /**
@@ -3314,6 +3326,14 @@ declare namespace S3 {
      * This tag must exist in the object's tag set in order for the rule to apply.
      */
     Tag?: Tag;
+    /**
+     * Minimum object size to which the rule applies.
+     */
+    ObjectSizeGreaterThan?: ObjectSizeGreaterThanBytes;
+    /**
+     * Maximum object size to which the rule applies.
+     */
+    ObjectSizeLessThan?: ObjectSizeLessThanBytes;
     And?: LifecycleRuleAndOperator;
   }
   export type LifecycleRules = LifecycleRule[];
@@ -3872,7 +3892,7 @@ declare namespace S3 {
      */
     TargetBucket: TargetBucket;
     /**
-     * Container for granting information.
+     * Container for granting information. Buckets that use the bucket owner enforced setting for Object Ownership don't support target grants. For more information, see Permissions for server access log delivery in the Amazon S3 User Guide.
      */
     TargetGrants?: TargetGrants;
     /**
@@ -3922,6 +3942,10 @@ declare namespace S3 {
      * The list of tags used when evaluating an AND predicate.
      */
     Tags?: TagSet;
+    /**
+     * The access point ARN used when evaluating an AND predicate.
+     */
+    AccessPointArn?: AccessPointArn;
   }
   export interface MetricsConfiguration {
     /**
@@ -3929,7 +3953,7 @@ declare namespace S3 {
      */
     Id: MetricsId;
     /**
-     * Specifies a metrics configuration filter. The metrics configuration will only include objects that meet the filter's criteria. A filter must be a prefix, a tag, or a conjunction (MetricsAndOperator).
+     * Specifies a metrics configuration filter. The metrics configuration will only include objects that meet the filter's criteria. A filter must be a prefix, an object tag, an access point ARN, or a conjunction (MetricsAndOperator).
      */
     Filter?: MetricsFilter;
   }
@@ -3943,6 +3967,10 @@ declare namespace S3 {
      * The tag used when evaluating a metrics filter.
      */
     Tag?: Tag;
+    /**
+     * The access point ARN used when evaluating a metrics filter.
+     */
+    AccessPointArn?: AccessPointArn;
     /**
      * A conjunction (logical AND) of predicates, which is used in evaluating a metrics filter. The operator must have at least two predicates, and an object must match all of the predicates in order for the filter to apply.
      */
@@ -3991,6 +4019,10 @@ declare namespace S3 {
      * Specifies the number of days an object is noncurrent before Amazon S3 can perform the associated action. For information about the noncurrent days calculations, see How Amazon S3 Calculates When an Object Became Noncurrent in the Amazon S3 User Guide.
      */
     NoncurrentDays?: Days;
+    /**
+     * Specifies how many noncurrent versions Amazon S3 will retain. If there are this many more recent noncurrent versions, Amazon S3 will take the associated action. For more information about noncurrent versions, see Lifecycle configuration elements in the Amazon S3 User Guide.
+     */
+    NewerNoncurrentVersions?: VersionCount;
   }
   export interface NoncurrentVersionTransition {
     /**
@@ -4001,6 +4033,10 @@ declare namespace S3 {
      * The class of storage used to store the object.
      */
     StorageClass?: TransitionStorageClass;
+    /**
+     * Specifies how many noncurrent versions Amazon S3 will retain. If there are this many more recent noncurrent versions, Amazon S3 will take the associated action. For more information about noncurrent versions, see Lifecycle configuration elements in the Amazon S3 User Guide.
+     */
+    NewerNoncurrentVersions?: VersionCount;
   }
   export type NoncurrentVersionTransitionList = NoncurrentVersionTransition[];
   export interface NotificationConfiguration {
@@ -4016,6 +4052,10 @@ declare namespace S3 {
      * Describes the Lambda functions to invoke and the events for which to invoke them.
      */
     LambdaFunctionConfigurations?: LambdaFunctionConfigurationList;
+    /**
+     * Enables delivery of events to Amazon EventBridge.
+     */
+    EventBridgeConfiguration?: EventBridgeConfiguration;
   }
   export interface NotificationConfigurationDeprecated {
     /**
@@ -4114,8 +4154,10 @@ declare namespace S3 {
     DefaultRetention?: DefaultRetention;
   }
   export type ObjectLockToken = string;
-  export type ObjectOwnership = "BucketOwnerPreferred"|"ObjectWriter"|string;
-  export type ObjectStorageClass = "STANDARD"|"REDUCED_REDUNDANCY"|"GLACIER"|"STANDARD_IA"|"ONEZONE_IA"|"INTELLIGENT_TIERING"|"DEEP_ARCHIVE"|"OUTPOSTS"|string;
+  export type ObjectOwnership = "BucketOwnerPreferred"|"ObjectWriter"|"BucketOwnerEnforced"|string;
+  export type ObjectSizeGreaterThanBytes = number;
+  export type ObjectSizeLessThanBytes = number;
+  export type ObjectStorageClass = "STANDARD"|"REDUCED_REDUNDANCY"|"GLACIER"|"STANDARD_IA"|"ONEZONE_IA"|"INTELLIGENT_TIERING"|"DEEP_ARCHIVE"|"OUTPOSTS"|"GLACIER_IR"|string;
   export interface ObjectVersion {
     /**
      * The entity tag is an MD5 hash of that version of the object.
@@ -4358,7 +4400,7 @@ declare namespace S3 {
   }
   export interface PutBucketEncryptionRequest {
     /**
-     * Specifies default encryption for a bucket using server-side encryption with Amazon S3-managed keys (SSE-S3) or customer master keys stored in Amazon Web Services KMS (SSE-KMS). For information about the Amazon S3 default encryption feature, see Amazon S3 Default Bucket Encryption in the Amazon S3 User Guide.
+     * Specifies default encryption for a bucket using server-side encryption with Amazon S3-managed keys (SSE-S3) or customer managed keys (SSE-KMS). For information about the Amazon S3 default encryption feature, see Amazon S3 Default Bucket Encryption in the Amazon S3 User Guide.
      */
     Bucket: BucketName;
     /**
@@ -4481,6 +4523,10 @@ declare namespace S3 {
      * The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
      */
     ExpectedBucketOwner?: AccountId;
+    /**
+     * Skips validation of Amazon SQS, Amazon SNS, and Lambda destinations. True or false value.
+     */
+    SkipDestinationValidation?: SkipValidation;
   }
   export interface PutBucketNotificationRequest {
     /**
@@ -4514,7 +4560,7 @@ declare namespace S3 {
      */
     ExpectedBucketOwner?: AccountId;
     /**
-     * The OwnershipControls (BucketOwnerPreferred or ObjectWriter) that you want to apply to this Amazon S3 bucket.
+     * The OwnershipControls (BucketOwnerEnforced, BucketOwnerPreferred, or ObjectWriter) that you want to apply to this Amazon S3 bucket.
      */
     OwnershipControls: OwnershipControls;
   }
@@ -4755,7 +4801,7 @@ declare namespace S3 {
      */
     ETag?: ETag;
     /**
-     * If you specified server-side encryption either with an Amazon Web Services KMS customer master key (CMK) or Amazon S3-managed encryption key in your PUT request, the response includes this header. It confirms the encryption algorithm that Amazon S3 used to encrypt the object.
+     * If you specified server-side encryption either with an Amazon Web Services KMS key or Amazon S3-managed encryption key in your PUT request, the response includes this header. It confirms the encryption algorithm that Amazon S3 used to encrypt the object.
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
@@ -4771,7 +4817,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If x-amz-server-side-encryption is present and has the value of aws:kms, this header specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed customer master key (CMK) that was used for the object. 
+     * If x-amz-server-side-encryption is present and has the value of aws:kms, this header specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key that was used for the object. 
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -4878,7 +4924,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If x-amz-server-side-encryption is present and has the value of aws:kms, this header specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetrical customer managed customer master key (CMK) that was used for the object. If you specify x-amz-server-side-encryption:aws:kms, but do not provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed CMK in Amazon Web Services to protect the data. If the KMS key does not exist in the same account issuing the command, you must use the full ARN and not just the ID. 
+     * If x-amz-server-side-encryption is present and has the value of aws:kms, this header specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetrical customer managed key that was used for the object. If you specify x-amz-server-side-encryption:aws:kms, but do not provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the Amazon Web Services managed key to protect the data. If the KMS key does not exist in the same account issuing the command, you must use the full ARN and not just the ID. 
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -5105,7 +5151,7 @@ declare namespace S3 {
      */
     Status: ReplicationRuleStatus;
     /**
-     * A container that describes additional filters for identifying the source objects that you want to replicate. You can choose to enable or disable the replication of these objects. Currently, Amazon S3 supports only the filter that you can specify for objects created with server-side encryption using a customer master key (CMK) stored in Amazon Web Services Key Management Service (SSE-KMS).
+     * A container that describes additional filters for identifying the source objects that you want to replicate. You can choose to enable or disable the replication of these objects. Currently, Amazon S3 supports only the filter that you can specify for objects created with server-side encryption using a customer managed key stored in Amazon Web Services Key Management Service (SSE-KMS).
      */
     SourceSelectionCriteria?: SourceSelectionCriteria;
     /**
@@ -5321,7 +5367,7 @@ declare namespace S3 {
   export type SSECustomerKeyMD5 = string;
   export interface SSEKMS {
     /**
-     * Specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed customer master key (CMK) to use for encrypting inventory reports.
+     * Specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key to use for encrypting inventory reports.
      */
     KeyId: SSEKMSKeyId;
   }
@@ -5444,6 +5490,7 @@ declare namespace S3 {
   export type ServerSideEncryptionRules = ServerSideEncryptionRule[];
   export type Setting = boolean;
   export type Size = number;
+  export type SkipValidation = boolean;
   export interface SourceSelectionCriteria {
     /**
      *  A container for filter information for the selection of Amazon S3 objects encrypted with Amazon Web Services KMS. If you include SourceSelectionCriteria in the replication configuration, this element is required. 
@@ -5483,7 +5530,7 @@ declare namespace S3 {
      */
     Details?: Stats;
   }
-  export type StorageClass = "STANDARD"|"REDUCED_REDUNDANCY"|"STANDARD_IA"|"ONEZONE_IA"|"INTELLIGENT_TIERING"|"GLACIER"|"DEEP_ARCHIVE"|"OUTPOSTS"|string;
+  export type StorageClass = "STANDARD"|"REDUCED_REDUNDANCY"|"STANDARD_IA"|"ONEZONE_IA"|"INTELLIGENT_TIERING"|"GLACIER"|"DEEP_ARCHIVE"|"OUTPOSTS"|"GLACIER_IR"|string;
   export interface StorageClassAnalysis {
     /**
      * Specifies how data related to the storage class analysis for an Amazon S3 bucket should be exported.
@@ -5592,7 +5639,7 @@ declare namespace S3 {
     StorageClass?: TransitionStorageClass;
   }
   export type TransitionList = Transition[];
-  export type TransitionStorageClass = "GLACIER"|"STANDARD_IA"|"ONEZONE_IA"|"INTELLIGENT_TIERING"|"DEEP_ARCHIVE"|string;
+  export type TransitionStorageClass = "GLACIER"|"STANDARD_IA"|"ONEZONE_IA"|"INTELLIGENT_TIERING"|"DEEP_ARCHIVE"|"GLACIER_IR"|string;
   export type Type = "CanonicalUser"|"AmazonCustomerByEmail"|"Group"|string;
   export type URI = string;
   export type UploadIdMarker = string;
@@ -5618,7 +5665,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed customer master key (CMK) that was used for the object.
+     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key that was used for the object.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -5720,7 +5767,7 @@ declare namespace S3 {
      */
     SSECustomerKeyMD5?: SSECustomerKeyMD5;
     /**
-     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed customer master key (CMK) was used for the object.
+     * If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key was used for the object.
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**
@@ -5778,6 +5825,7 @@ declare namespace S3 {
   }
   export type UserMetadata = MetadataEntry[];
   export type Value = string;
+  export type VersionCount = number;
   export type VersionIdMarker = string;
   export interface VersioningConfiguration {
     /**
@@ -5927,7 +5975,7 @@ declare namespace S3 {
      */
     SSECustomerAlgorithm?: SSECustomerAlgorithm;
     /**
-     *  If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed customer master key (CMK) that was used for stored in Amazon S3 object. 
+     *  If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key that was used for stored in Amazon S3 object. 
      */
     SSEKMSKeyId?: SSEKMSKeyId;
     /**