@pairling/runtime-darwin-x64 0.0.0 → 0.2.0

package/python/lib/python3.12/asyncio/protocols.py

@@ -0,0 +1,216 @@
+"""Abstract Protocol base classes."""
+
+__all__ = (
+    'BaseProtocol', 'Protocol', 'DatagramProtocol',
+    'SubprocessProtocol', 'BufferedProtocol',
+)
+
+
+class BaseProtocol:
+    """Common base class for protocol interfaces.
+
+    Usually user implements protocols that derived from BaseProtocol
+    like Protocol or ProcessProtocol.
+
+    The only case when BaseProtocol should be implemented directly is
+    write-only transport like write pipe
+    """
+
+    __slots__ = ()
+
+    def connection_made(self, transport):
+        """Called when a connection is made.
+
+        The argument is the transport representing the pipe connection.
+        To receive data, wait for data_received() calls.
+        When the connection is closed, connection_lost() is called.
+        """
+
+    def connection_lost(self, exc):
+        """Called when the connection is lost or closed.
+
+        The argument is an exception object or None (the latter
+        meaning a regular EOF is received or the connection was
+        aborted or closed).
+        """
+
+    def pause_writing(self):
+        """Called when the transport's buffer goes over the high-water mark.
+
+        Pause and resume calls are paired -- pause_writing() is called
+        once when the buffer goes strictly over the high-water mark
+        (even if subsequent writes increases the buffer size even
+        more), and eventually resume_writing() is called once when the
+        buffer size reaches the low-water mark.
+
+        Note that if the buffer size equals the high-water mark,
+        pause_writing() is not called -- it must go strictly over.
+        Conversely, resume_writing() is called when the buffer size is
+        equal or lower than the low-water mark.  These end conditions
+        are important to ensure that things go as expected when either
+        mark is zero.
+
+        NOTE: This is the only Protocol callback that is not called
+        through EventLoop.call_soon() -- if it were, it would have no
+        effect when it's most needed (when the app keeps writing
+        without yielding until pause_writing() is called).
+        """
+
+    def resume_writing(self):
+        """Called when the transport's buffer drains below the low-water mark.
+
+        See pause_writing() for details.
+        """
+
+
+class Protocol(BaseProtocol):
+    """Interface for stream protocol.
+
+    The user should implement this interface.  They can inherit from
+    this class but don't need to.  The implementations here do
+    nothing (they don't raise exceptions).
+
+    When the user wants to requests a transport, they pass a protocol
+    factory to a utility function (e.g., EventLoop.create_connection()).
+
+    When the connection is made successfully, connection_made() is
+    called with a suitable transport object.  Then data_received()
+    will be called 0 or more times with data (bytes) received from the
+    transport; finally, connection_lost() will be called exactly once
+    with either an exception object or None as an argument.
+
+    State machine of calls:
+
+      start -> CM [-> DR*] [-> ER?] -> CL -> end
+
+    * CM: connection_made()
+    * DR: data_received()
+    * ER: eof_received()
+    * CL: connection_lost()
+    """
+
+    __slots__ = ()
+
+    def data_received(self, data):
+        """Called when some data is received.
+
+        The argument is a bytes object.
+        """
+
+    def eof_received(self):
+        """Called when the other end calls write_eof() or equivalent.
+
+        If this returns a false value (including None), the transport
+        will close itself.  If it returns a true value, closing the
+        transport is up to the protocol.
+        """
+
+
+class BufferedProtocol(BaseProtocol):
+    """Interface for stream protocol with manual buffer control.
+
+    Event methods, such as `create_server` and `create_connection`,
+    accept factories that return protocols that implement this interface.
+
+    The idea of BufferedProtocol is that it allows to manually allocate
+    and control the receive buffer.  Event loops can then use the buffer
+    provided by the protocol to avoid unnecessary data copies.  This
+    can result in noticeable performance improvement for protocols that
+    receive big amounts of data.  Sophisticated protocols can allocate
+    the buffer only once at creation time.
+
+    State machine of calls:
+
+      start -> CM [-> GB [-> BU?]]* [-> ER?] -> CL -> end
+
+    * CM: connection_made()
+    * GB: get_buffer()
+    * BU: buffer_updated()
+    * ER: eof_received()
+    * CL: connection_lost()
+    """
+
+    __slots__ = ()
+
+    def get_buffer(self, sizehint):
+        """Called to allocate a new receive buffer.
+
+        *sizehint* is a recommended minimal size for the returned
+        buffer.  When set to -1, the buffer size can be arbitrary.
+
+        Must return an object that implements the
+        :ref:`buffer protocol <bufferobjects>`.
+        It is an error to return a zero-sized buffer.
+        """
+
+    def buffer_updated(self, nbytes):
+        """Called when the buffer was updated with the received data.
+
+        *nbytes* is the total number of bytes that were written to
+        the buffer.
+        """
+
+    def eof_received(self):
+        """Called when the other end calls write_eof() or equivalent.
+
+        If this returns a false value (including None), the transport
+        will close itself.  If it returns a true value, closing the
+        transport is up to the protocol.
+        """
+
+
+class DatagramProtocol(BaseProtocol):
+    """Interface for datagram protocol."""
+
+    __slots__ = ()
+
+    def datagram_received(self, data, addr):
+        """Called when some datagram is received."""
+
+    def error_received(self, exc):
+        """Called when a send or receive operation raises an OSError.
+
+        (Other than BlockingIOError or InterruptedError.)
+        """
+
+
+class SubprocessProtocol(BaseProtocol):
+    """Interface for protocol for subprocess calls."""
+
+    __slots__ = ()
+
+    def pipe_data_received(self, fd, data):
+        """Called when the subprocess writes data into stdout/stderr pipe.
+
+        fd is int file descriptor.
+        data is bytes object.
+        """
+
+    def pipe_connection_lost(self, fd, exc):
+        """Called when a file descriptor associated with the child process is
+        closed.
+
+        fd is the int file descriptor that was closed.
+        """
+
+    def process_exited(self):
+        """Called when subprocess has exited."""
+
+
+def _feed_data_to_buffered_proto(proto, data):
+    data_len = len(data)
+    while data_len:
+        buf = proto.get_buffer(data_len)
+        buf_len = len(buf)
+        if not buf_len:
+            raise RuntimeError('get_buffer() returned an empty buffer')
+
+        if buf_len >= data_len:
+            buf[:data_len] = data
+            proto.buffer_updated(data_len)
+            return
+        else:
+            buf[:buf_len] = data[:buf_len]
+            proto.buffer_updated(buf_len)
+            data = data[buf_len:]
+            data_len = len(data)

package/python/lib/python3.12/asyncio/queues.py

@@ -0,0 +1,244 @@
+__all__ = ('Queue', 'PriorityQueue', 'LifoQueue', 'QueueFull', 'QueueEmpty')
+
+import collections
+import heapq
+from types import GenericAlias
+
+from . import locks
+from . import mixins
+
+
+class QueueEmpty(Exception):
+    """Raised when Queue.get_nowait() is called on an empty Queue."""
+    pass
+
+
+class QueueFull(Exception):
+    """Raised when the Queue.put_nowait() method is called on a full Queue."""
+    pass
+
+
+class Queue(mixins._LoopBoundMixin):
+    """A queue, useful for coordinating producer and consumer coroutines.
+
+    If maxsize is less than or equal to zero, the queue size is infinite. If it
+    is an integer greater than 0, then "await put()" will block when the
+    queue reaches maxsize, until an item is removed by get().
+
+    Unlike the standard library Queue, you can reliably know this Queue's size
+    with qsize(), since your single-threaded asyncio application won't be
+    interrupted between calling qsize() and doing an operation on the Queue.
+    """
+
+    def __init__(self, maxsize=0):
+        self._maxsize = maxsize
+
+        # Futures.
+        self._getters = collections.deque()
+        # Futures.
+        self._putters = collections.deque()
+        self._unfinished_tasks = 0
+        self._finished = locks.Event()
+        self._finished.set()
+        self._init(maxsize)
+
+    # These three are overridable in subclasses.
+
+    def _init(self, maxsize):
+        self._queue = collections.deque()
+
+    def _get(self):
+        return self._queue.popleft()
+
+    def _put(self, item):
+        self._queue.append(item)
+
+    # End of the overridable methods.
+
+    def _wakeup_next(self, waiters):
+        # Wake up the next waiter (if any) that isn't cancelled.
+        while waiters:
+            waiter = waiters.popleft()
+            if not waiter.done():
+                waiter.set_result(None)
+                break
+
+    def __repr__(self):
+        return f'<{type(self).__name__} at {id(self):#x} {self._format()}>'
+
+    def __str__(self):
+        return f'<{type(self).__name__} {self._format()}>'
+
+    __class_getitem__ = classmethod(GenericAlias)
+
+    def _format(self):
+        result = f'maxsize={self._maxsize!r}'
+        if getattr(self, '_queue', None):
+            result += f' _queue={list(self._queue)!r}'
+        if self._getters:
+            result += f' _getters[{len(self._getters)}]'
+        if self._putters:
+            result += f' _putters[{len(self._putters)}]'
+        if self._unfinished_tasks:
+            result += f' tasks={self._unfinished_tasks}'
+        return result
+
+    def qsize(self):
+        """Number of items in the queue."""
+        return len(self._queue)
+
+    @property
+    def maxsize(self):
+        """Number of items allowed in the queue."""
+        return self._maxsize
+
+    def empty(self):
+        """Return True if the queue is empty, False otherwise."""
+        return not self._queue
+
+    def full(self):
+        """Return True if there are maxsize items in the queue.
+
+        Note: if the Queue was initialized with maxsize=0 (the default),
+        then full() is never True.
+        """
+        if self._maxsize <= 0:
+            return False
+        else:
+            return self.qsize() >= self._maxsize
+
+    async def put(self, item):
+        """Put an item into the queue.
+
+        Put an item into the queue. If the queue is full, wait until a free
+        slot is available before adding item.
+        """
+        while self.full():
+            putter = self._get_loop().create_future()
+            self._putters.append(putter)
+            try:
+                await putter
+            except:
+                putter.cancel()  # Just in case putter is not done yet.
+                try:
+                    # Clean self._putters from canceled putters.
+                    self._putters.remove(putter)
+                except ValueError:
+                    # The putter could be removed from self._putters by a
+                    # previous get_nowait call.
+                    pass
+                if not self.full() and not putter.cancelled():
+                    # We were woken up by get_nowait(), but can't take
+                    # the call.  Wake up the next in line.
+                    self._wakeup_next(self._putters)
+                raise
+        return self.put_nowait(item)
+
+    def put_nowait(self, item):
+        """Put an item into the queue without blocking.
+
+        If no free slot is immediately available, raise QueueFull.
+        """
+        if self.full():
+            raise QueueFull
+        self._put(item)
+        self._unfinished_tasks += 1
+        self._finished.clear()
+        self._wakeup_next(self._getters)
+
+    async def get(self):
+        """Remove and return an item from the queue.
+
+        If queue is empty, wait until an item is available.
+        """
+        while self.empty():
+            getter = self._get_loop().create_future()
+            self._getters.append(getter)
+            try:
+                await getter
+            except:
+                getter.cancel()  # Just in case getter is not done yet.
+                try:
+                    # Clean self._getters from canceled getters.
+                    self._getters.remove(getter)
+                except ValueError:
+                    # The getter could be removed from self._getters by a
+                    # previous put_nowait call.
+                    pass
+                if not self.empty() and not getter.cancelled():
+                    # We were woken up by put_nowait(), but can't take
+                    # the call.  Wake up the next in line.
+                    self._wakeup_next(self._getters)
+                raise
+        return self.get_nowait()
+
+    def get_nowait(self):
+        """Remove and return an item from the queue.
+
+        Return an item if one is immediately available, else raise QueueEmpty.
+        """
+        if self.empty():
+            raise QueueEmpty
+        item = self._get()
+        self._wakeup_next(self._putters)
+        return item
+
+    def task_done(self):
+        """Indicate that a formerly enqueued task is complete.
+
+        Used by queue consumers. For each get() used to fetch a task,
+        a subsequent call to task_done() tells the queue that the processing
+        on the task is complete.
+
+        If a join() is currently blocking, it will resume when all items have
+        been processed (meaning that a task_done() call was received for every
+        item that had been put() into the queue).
+
+        Raises ValueError if called more times than there were items placed in
+        the queue.
+        """
+        if self._unfinished_tasks <= 0:
+            raise ValueError('task_done() called too many times')
+        self._unfinished_tasks -= 1
+        if self._unfinished_tasks == 0:
+            self._finished.set()
+
+    async def join(self):
+        """Block until all items in the queue have been gotten and processed.
+
+        The count of unfinished tasks goes up whenever an item is added to the
+        queue. The count goes down whenever a consumer calls task_done() to
+        indicate that the item was retrieved and all work on it is complete.
+        When the count of unfinished tasks drops to zero, join() unblocks.
+        """
+        if self._unfinished_tasks > 0:
+            await self._finished.wait()
+
+
+class PriorityQueue(Queue):
+    """A subclass of Queue; retrieves entries in priority order (lowest first).
+
+    Entries are typically tuples of the form: (priority number, data).
+    """
+
+    def _init(self, maxsize):
+        self._queue = []
+
+    def _put(self, item, heappush=heapq.heappush):
+        heappush(self._queue, item)
+
+    def _get(self, heappop=heapq.heappop):
+        return heappop(self._queue)
+
+
+class LifoQueue(Queue):
+    """A subclass of Queue that retrieves most recently added entries first."""
+
+    def _init(self, maxsize):
+        self._queue = []
+
+    def _put(self, item):
+        self._queue.append(item)
+
+    def _get(self):
+        return self._queue.pop()

package/python/lib/python3.12/asyncio/runners.py

@@ -0,0 +1,216 @@
+__all__ = ('Runner', 'run')
+
+import contextvars
+import enum
+import functools
+import threading
+import signal
+from . import coroutines
+from . import events
+from . import exceptions
+from . import tasks
+from . import constants
+
+class _State(enum.Enum):
+    CREATED = "created"
+    INITIALIZED = "initialized"
+    CLOSED = "closed"
+
+
+class Runner:
+    """A context manager that controls event loop life cycle.
+
+    The context manager always creates a new event loop,
+    allows to run async functions inside it,
+    and properly finalizes the loop at the context manager exit.
+
+    If debug is True, the event loop will be run in debug mode.
+    If loop_factory is passed, it is used for new event loop creation.
+
+    asyncio.run(main(), debug=True)
+
+    is a shortcut for
+
+    with asyncio.Runner(debug=True) as runner:
+        runner.run(main())
+
+    The run() method can be called multiple times within the runner's context.
+
+    This can be useful for interactive console (e.g. IPython),
+    unittest runners, console tools, -- everywhere when async code
+    is called from existing sync framework and where the preferred single
+    asyncio.run() call doesn't work.
+
+    """
+
+    # Note: the class is final, it is not intended for inheritance.
+
+    def __init__(self, *, debug=None, loop_factory=None):
+        self._state = _State.CREATED
+        self._debug = debug
+        self._loop_factory = loop_factory
+        self._loop = None
+        self._context = None
+        self._interrupt_count = 0
+        self._set_event_loop = False
+
+    def __enter__(self):
+        self._lazy_init()
+        return self
+
+    def __exit__(self, exc_type, exc_val, exc_tb):
+        self.close()
+
+    def close(self):
+        """Shutdown and close event loop."""
+        if self._state is not _State.INITIALIZED:
+            return
+        try:
+            loop = self._loop
+            _cancel_all_tasks(loop)
+            loop.run_until_complete(loop.shutdown_asyncgens())
+            loop.run_until_complete(
+                loop.shutdown_default_executor(constants.THREAD_JOIN_TIMEOUT))
+        finally:
+            if self._set_event_loop:
+                events.set_event_loop(None)
+            loop.close()
+            self._loop = None
+            self._state = _State.CLOSED
+
+    def get_loop(self):
+        """Return embedded event loop."""
+        self._lazy_init()
+        return self._loop
+
+    def run(self, coro, *, context=None):
+        """Run a coroutine inside the embedded event loop."""
+        if not coroutines.iscoroutine(coro):
+            raise ValueError("a coroutine was expected, got {!r}".format(coro))
+
+        if events._get_running_loop() is not None:
+            # fail fast with short traceback
+            raise RuntimeError(
+                "Runner.run() cannot be called from a running event loop")
+
+        self._lazy_init()
+
+        if context is None:
+            context = self._context
+        task = self._loop.create_task(coro, context=context)
+
+        if (threading.current_thread() is threading.main_thread()
+            and signal.getsignal(signal.SIGINT) is signal.default_int_handler
+        ):
+            sigint_handler = functools.partial(self._on_sigint, main_task=task)
+            try:
+                signal.signal(signal.SIGINT, sigint_handler)
+            except ValueError:
+                # `signal.signal` may throw if `threading.main_thread` does
+                # not support signals (e.g. embedded interpreter with signals
+                # not registered - see gh-91880)
+                sigint_handler = None
+        else:
+            sigint_handler = None
+
+        self._interrupt_count = 0
+        try:
+            return self._loop.run_until_complete(task)
+        except exceptions.CancelledError:
+            if self._interrupt_count > 0:
+                uncancel = getattr(task, "uncancel", None)
+                if uncancel is not None and uncancel() == 0:
+                    raise KeyboardInterrupt()
+            raise  # CancelledError
+        finally:
+            if (sigint_handler is not None
+                and signal.getsignal(signal.SIGINT) is sigint_handler
+            ):
+                signal.signal(signal.SIGINT, signal.default_int_handler)
+
+    def _lazy_init(self):
+        if self._state is _State.CLOSED:
+            raise RuntimeError("Runner is closed")
+        if self._state is _State.INITIALIZED:
+            return
+        if self._loop_factory is None:
+            self._loop = events.new_event_loop()
+            if not self._set_event_loop:
+                # Call set_event_loop only once to avoid calling
+                # attach_loop multiple times on child watchers
+                events.set_event_loop(self._loop)
+                self._set_event_loop = True
+        else:
+            self._loop = self._loop_factory()
+        if self._debug is not None:
+            self._loop.set_debug(self._debug)
+        self._context = contextvars.copy_context()
+        self._state = _State.INITIALIZED
+
+    def _on_sigint(self, signum, frame, main_task):
+        self._interrupt_count += 1
+        if self._interrupt_count == 1 and not main_task.done():
+            main_task.cancel()
+            # wakeup loop if it is blocked by select() with long timeout
+            self._loop.call_soon_threadsafe(lambda: None)
+            return
+        raise KeyboardInterrupt()
+
+
+def run(main, *, debug=None, loop_factory=None):
+    """Execute the coroutine and return the result.
+
+    This function runs the passed coroutine, taking care of
+    managing the asyncio event loop, finalizing asynchronous
+    generators and closing the default executor.
+
+    This function cannot be called when another asyncio event loop is
+    running in the same thread.
+
+    If debug is True, the event loop will be run in debug mode.
+    If loop_factory is passed, it is used for new event loop creation.
+
+    This function always creates a new event loop and closes it at the end.
+    It should be used as a main entry point for asyncio programs, and should
+    ideally only be called once.
+
+    The executor is given a timeout duration of 5 minutes to shutdown.
+    If the executor hasn't finished within that duration, a warning is
+    emitted and the executor is closed.
+
+    Example:
+
+        async def main():
+            await asyncio.sleep(1)
+            print('hello')
+
+        asyncio.run(main())
+    """
+    if events._get_running_loop() is not None:
+        # fail fast with short traceback
+        raise RuntimeError(
+            "asyncio.run() cannot be called from a running event loop")
+
+    with Runner(debug=debug, loop_factory=loop_factory) as runner:
+        return runner.run(main)
+
+
+def _cancel_all_tasks(loop):
+    to_cancel = tasks.all_tasks(loop)
+    if not to_cancel:
+        return
+
+    for task in to_cancel:
+        task.cancel()
+
+    loop.run_until_complete(tasks.gather(*to_cancel, return_exceptions=True))
+
+    for task in to_cancel:
+        if task.cancelled():
+            continue
+        if task.exception() is not None:
+            loop.call_exception_handler({
+                'message': 'unhandled exception during asyncio.run() shutdown',
+                'exception': task.exception(),
+                'task': task,
+            })