@pafi-dev/core 0.3.0-beta.8 → 0.3.0-beta.9

package/dist/index.d.cts

@@ -538,202 +538,6 @@ interface CheckEthAndBranchParams {
  */
 declare function checkEthAndBranch(params: CheckEthAndBranchParams): Promise<SubmissionPath>;
 
-/**
- * Identifies the user-flow scenario the sponsorship covers. Used by
- * sponsor-relayer for per-scenario rate limits + by Privy verifier
- * to log sponsorship reason.
- *
- * Keep in sync with `SponsorshipScenario` in the paymaster module —
- * SponsorAuth replaces the Coinbase paymaster flow but reuses the
- * scenario taxonomy.
- */
-type SponsorAuthScenario = "mint" | "burn" | "swap" | "perp_deposit";
-/**
- * Canonical SponsorAuth payload — the EIP-712 message that PAFI
- * sponsor-relayer signs and Privy native verifies before funding gas.
- *
- * See `SPONSOR_AUTH_DESIGN.md` for full architecture.
- *
- * ## Replay protection layers
- *
- *   - `nonce`        — per-(sender, scenario), allocated by sponsor-relayer
- *   - `expiresAt`    — short window (60-120s recommended)
- *   - `callDataHash` — binds payload to ONE specific UserOp callData
- *   - `sender`       — binds to one EOA
- *   - `chainId`      — binds to one chain
- *
- * Mutation of any field invalidates the signature.
- */
-interface SponsorAuthPayload {
-    chainId: number;
-    sender: Address;
-    /** keccak256(userOp.callData) — caller computes from the UserOp they intend to submit. */
-    callDataHash: Hex;
-    /** Per-(sender, scenario) monotonic counter from sponsor-relayer. */
-    nonce: bigint;
-    /** Unix seconds. After this, Privy verifier rejects. */
-    expiresAt: number;
-    scenario: SponsorAuthScenario;
-    /** Issuer that originated this sponsorship request (e.g. "gg56"). */
-    issuerId: string;
-}
-/**
- * Optional extension fields — keep separate so the canonical payload
- * stays minimal. Privy verifier may or may not enforce these depending
- * on dashboard config.
- */
-interface SponsorAuthPayloadExtended extends SponsorAuthPayload {
-    /** Max gas (units) sponsor-relayer pre-approved. */
-    maxGasLimit?: bigint;
-    /** Max gas price (wei) sponsor-relayer pre-approved. */
-    maxGasPrice?: bigint;
-    /** Audit metadata — surfaced in logs only, not used for verification. */
-    intent?: {
-        amount?: string;
-        pointToken?: Address;
-        targetContract?: Address;
-    };
-}
-/**
- * EIP-712 domain for SponsorAuth signatures.
- *
- * `verifyingContract` is `0x0` because verification is OFF-CHAIN
- * (Privy native verifier reads sig + payload, recovers signer,
- * compares with PAFI public key registered in Privy dashboard).
- * The domain is still EIP-712 to leverage existing tooling.
- */
-declare const SPONSOR_AUTH_DOMAIN_NAME: "PAFI SponsorAuth";
-declare const SPONSOR_AUTH_DOMAIN_VERSION: "1";
-/** EIP-712 typed-data shape — matches `SponsorAuthPayload` field order. */
-declare const SPONSOR_AUTH_TYPES: {
-    readonly SponsorAuth: readonly [{
-        readonly name: "chainId";
-        readonly type: "uint256";
-    }, {
-        readonly name: "sender";
-        readonly type: "address";
-    }, {
-        readonly name: "callDataHash";
-        readonly type: "bytes32";
-    }, {
-        readonly name: "nonce";
-        readonly type: "uint256";
-    }, {
-        readonly name: "expiresAt";
-        readonly type: "uint256";
-    }, {
-        readonly name: "scenario";
-        readonly type: "string";
-    }, {
-        readonly name: "issuerId";
-        readonly type: "string";
-    }];
-};
-/**
- * Build the EIP-712 domain object Privy verifier expects. Same
- * `chainId` as the SponsorAuth payload.
- */
-declare function buildSponsorAuthDomain(chainId: number): {
-    readonly name: "PAFI SponsorAuth";
-    readonly version: "1";
-    readonly chainId: number;
-    readonly verifyingContract: Address;
-};
-
-/**
- * Build the EIP-712 typed data object for a SponsorAuth payload.
- * Returned shape is compatible with `walletClient.signTypedData()`,
- * `viem.recoverTypedDataAddress()`, and any other EIP-712 tooling.
- *
- * Use this when you need the full typed-data object (e.g. to display
- * to a hardware-wallet user, or to feed into an off-chain audit log).
- * Most callers only need `signSponsorAuth` / `verifySponsorAuth` below.
- */
-declare function buildSponsorAuthTypedData(payload: SponsorAuthPayload): {
-    domain: {
-        readonly name: "PAFI SponsorAuth";
-        readonly version: "1";
-        readonly chainId: number;
-        readonly verifyingContract: Address;
-    };
-    types: {
-        readonly SponsorAuth: readonly [{
-            readonly name: "chainId";
-            readonly type: "uint256";
-        }, {
-            readonly name: "sender";
-            readonly type: "address";
-        }, {
-            readonly name: "callDataHash";
-            readonly type: "bytes32";
-        }, {
-            readonly name: "nonce";
-            readonly type: "uint256";
-        }, {
-            readonly name: "expiresAt";
-            readonly type: "uint256";
-        }, {
-            readonly name: "scenario";
-            readonly type: "string";
-        }, {
-            readonly name: "issuerId";
-            readonly type: "string";
-        }];
-    };
-    primaryType: "SponsorAuth";
-    message: {
-        chainId: bigint;
-        sender: `0x${string}`;
-        callDataHash: `0x${string}`;
-        nonce: bigint;
-        expiresAt: bigint;
-        scenario: SponsorAuthScenario;
-        issuerId: string;
-    };
-};
-/**
- * Sign a SponsorAuth payload using a viem `WalletClient`. Production
- * sponsor-relayer should use a KMS-backed signer instead — this helper
- * is for tests + local dev where you hold a raw private key.
- *
- * Returns the **serialized 65-byte signature** ready to put into
- * `SponsorAuthResponse.sponsorAuth`.
- */
-declare function signSponsorAuth(walletClient: WalletClient, payload: SponsorAuthPayload): Promise<Hex>;
-/**
- * Verify a SponsorAuth signature offline. Use to:
- *
- *   - Smoke-test that sponsor-relayer's output is well-formed (FE)
- *   - Unit tests in SDK
- *   - Defense-in-depth check before submitting to Privy
- *
- * Privy verifier does the same check on their side — this is NOT a
- * substitute for Privy verification. It exists so consumers can fail
- * fast on a mangled sig before round-tripping through Privy.
- *
- * @param payload          The exact payload PAFI BE returned
- * @param signature        The serialized signature (sponsorAuth field)
- * @param expectedSigner   PAFI's SponsorAuth signing-key address
- *                         (registered in Privy dashboard)
- *
- * @returns `true` if signature recovers to `expectedSigner`,
- *          and the payload hasn't expired (`expiresAt > now`).
- *          Returns `false` on any failure — does NOT throw.
- */
-declare function verifySponsorAuth(payload: SponsorAuthPayload, signature: Hex, expectedSigner: Address): Promise<{
-    ok: boolean;
-    reason?: "INVALID_SIGNER" | "EXPIRED" | "INVALID_SIGNATURE_FORMAT";
-    recoveredAddress?: Address;
-}>;
-/**
- * Helper — compute `callDataHash` from a UserOperation's `callData`.
- * Same hash function (`keccak256`) Privy verifier uses.
- *
- * Bind this hash into the SponsorAuth payload BEFORE signing, so the
- * sig is invalid for any other UserOp.
- */
-declare function computeCallDataHash(callData: Hex): Hex;
-
 /**
  * Real `PointToken` ABI — matches the contract deployed on Base mainnet
  * (POINT at `0x7d25E7156E51F865D522fd3ef257a6B5DD41b97e`). Sourced from
@@ -1489,4 +1293,4 @@ declare class PafiSDK {
     signLoginMessage(message: string): Promise<Hex>;
 }
 
-export { ApiError, BATCH_EXECUTOR_ABI, BATCH_EXECUTOR_ADDRESS_BASE_MAINNET, BATCH_EXECUTOR_ADDRESS_BASE_SEPOLIA, BROKER_HASHES, BestQuote, type BuildPartialUserOpParams, type BuildPerpDepositWithGasDeductionParams, COMMON_POOLS, COMMON_TOKENS, CONTRACT_ADDRESSES, ChainConfig, type CheckEthAndBranchParams, ConfigurationError, type ContractAddresses, EIP712Signature, LoginMessageParams, MintRequest, type ModalOpenOptions, ORDERLY_VAULT_ABI, ORDERLY_VAULT_ADDRESSES, ORDERLY_VAULT_BASE_MAINNET, Operation, POINT_TOKEN_FACTORY_ADDRESSES, POINT_TOKEN_IMPL_ADDRESSES, POINT_TOKEN_POOLS, POINT_TOKEN_ABI as POINT_TOKEN_V2_ABI, PafiSDK, PafiSDKConfig, PafiSDKError, type PafiWebModalAdapter, type PafiWebModalHandle, PartialUserOperation, type PaymasterConfig, PointTokenDomainConfig, PoolKey, QuoteResult, ReceiverConsent, SPONSOR_AUTH_DOMAIN_NAME, SPONSOR_AUTH_DOMAIN_VERSION, SPONSOR_AUTH_TYPES, SUPPORTED_CHAINS, type SignatureStruct, SignatureVerification, SigningError, SimulationError, type SponsorAuthPayload, type SponsorAuthPayloadExtended, type SponsorAuthScenario, type SponsorshipScenario, type SubmissionPath, SwapSimulationResult, TOKEN_HASHES, UNIVERSAL_ROUTER_ADDRESSES, UserOperation, V4_QUOTER_ADDRESSES, type VaultDepositFE, _resetPaymasterConfigForTests, assembleUserOperation, buildPartialUserOperation, buildPerpDepositWithGasDeduction, buildSponsorAuthDomain, buildSponsorAuthTypedData, burnRequestTypes, checkEthAndBranch, computeAccountId, computeCallDataHash, encodeBatchExecute, erc20ApproveOp, erc20BurnOp, erc20TransferOp, getContractAddresses, getPafiWebModalAdapter, getPaymasterConfig, isPaymasterConfigured, mintRequestTypes, openPafiWebModal, openWebPopup, rawCallOp, receiverConsentTypes, setPafiWebModalAdapter, setPaymasterConfig, signSponsorAuth, verifySponsorAuth, webPopupAdapter };
+export { ApiError, BATCH_EXECUTOR_ABI, BATCH_EXECUTOR_ADDRESS_BASE_MAINNET, BATCH_EXECUTOR_ADDRESS_BASE_SEPOLIA, BROKER_HASHES, BestQuote, type BuildPartialUserOpParams, type BuildPerpDepositWithGasDeductionParams, COMMON_POOLS, COMMON_TOKENS, CONTRACT_ADDRESSES, ChainConfig, type CheckEthAndBranchParams, ConfigurationError, type ContractAddresses, EIP712Signature, LoginMessageParams, MintRequest, type ModalOpenOptions, ORDERLY_VAULT_ABI, ORDERLY_VAULT_ADDRESSES, ORDERLY_VAULT_BASE_MAINNET, Operation, POINT_TOKEN_FACTORY_ADDRESSES, POINT_TOKEN_IMPL_ADDRESSES, POINT_TOKEN_POOLS, POINT_TOKEN_ABI as POINT_TOKEN_V2_ABI, PafiSDK, PafiSDKConfig, PafiSDKError, type PafiWebModalAdapter, type PafiWebModalHandle, PartialUserOperation, type PaymasterConfig, PointTokenDomainConfig, PoolKey, QuoteResult, ReceiverConsent, SUPPORTED_CHAINS, type SignatureStruct, SignatureVerification, SigningError, SimulationError, type SponsorshipScenario, type SubmissionPath, SwapSimulationResult, TOKEN_HASHES, UNIVERSAL_ROUTER_ADDRESSES, UserOperation, V4_QUOTER_ADDRESSES, type VaultDepositFE, _resetPaymasterConfigForTests, assembleUserOperation, buildPartialUserOperation, buildPerpDepositWithGasDeduction, burnRequestTypes, checkEthAndBranch, computeAccountId, encodeBatchExecute, erc20ApproveOp, erc20BurnOp, erc20TransferOp, getContractAddresses, getPafiWebModalAdapter, getPaymasterConfig, isPaymasterConfigured, mintRequestTypes, openPafiWebModal, openWebPopup, rawCallOp, receiverConsentTypes, setPafiWebModalAdapter, setPaymasterConfig, webPopupAdapter };

package/dist/index.d.ts

@@ -538,202 +538,6 @@ interface CheckEthAndBranchParams {
  */
 declare function checkEthAndBranch(params: CheckEthAndBranchParams): Promise<SubmissionPath>;
 
-/**
- * Identifies the user-flow scenario the sponsorship covers. Used by
- * sponsor-relayer for per-scenario rate limits + by Privy verifier
- * to log sponsorship reason.
- *
- * Keep in sync with `SponsorshipScenario` in the paymaster module —
- * SponsorAuth replaces the Coinbase paymaster flow but reuses the
- * scenario taxonomy.
- */
-type SponsorAuthScenario = "mint" | "burn" | "swap" | "perp_deposit";
-/**
- * Canonical SponsorAuth payload — the EIP-712 message that PAFI
- * sponsor-relayer signs and Privy native verifies before funding gas.
- *
- * See `SPONSOR_AUTH_DESIGN.md` for full architecture.
- *
- * ## Replay protection layers
- *
- *   - `nonce`        — per-(sender, scenario), allocated by sponsor-relayer
- *   - `expiresAt`    — short window (60-120s recommended)
- *   - `callDataHash` — binds payload to ONE specific UserOp callData
- *   - `sender`       — binds to one EOA
- *   - `chainId`      — binds to one chain
- *
- * Mutation of any field invalidates the signature.
- */
-interface SponsorAuthPayload {
-    chainId: number;
-    sender: Address;
-    /** keccak256(userOp.callData) — caller computes from the UserOp they intend to submit. */
-    callDataHash: Hex;
-    /** Per-(sender, scenario) monotonic counter from sponsor-relayer. */
-    nonce: bigint;
-    /** Unix seconds. After this, Privy verifier rejects. */
-    expiresAt: number;
-    scenario: SponsorAuthScenario;
-    /** Issuer that originated this sponsorship request (e.g. "gg56"). */
-    issuerId: string;
-}
-/**
- * Optional extension fields — keep separate so the canonical payload
- * stays minimal. Privy verifier may or may not enforce these depending
- * on dashboard config.
- */
-interface SponsorAuthPayloadExtended extends SponsorAuthPayload {
-    /** Max gas (units) sponsor-relayer pre-approved. */
-    maxGasLimit?: bigint;
-    /** Max gas price (wei) sponsor-relayer pre-approved. */
-    maxGasPrice?: bigint;
-    /** Audit metadata — surfaced in logs only, not used for verification. */
-    intent?: {
-        amount?: string;
-        pointToken?: Address;
-        targetContract?: Address;
-    };
-}
-/**
- * EIP-712 domain for SponsorAuth signatures.
- *
- * `verifyingContract` is `0x0` because verification is OFF-CHAIN
- * (Privy native verifier reads sig + payload, recovers signer,
- * compares with PAFI public key registered in Privy dashboard).
- * The domain is still EIP-712 to leverage existing tooling.
- */
-declare const SPONSOR_AUTH_DOMAIN_NAME: "PAFI SponsorAuth";
-declare const SPONSOR_AUTH_DOMAIN_VERSION: "1";
-/** EIP-712 typed-data shape — matches `SponsorAuthPayload` field order. */
-declare const SPONSOR_AUTH_TYPES: {
-    readonly SponsorAuth: readonly [{
-        readonly name: "chainId";
-        readonly type: "uint256";
-    }, {
-        readonly name: "sender";
-        readonly type: "address";
-    }, {
-        readonly name: "callDataHash";
-        readonly type: "bytes32";
-    }, {
-        readonly name: "nonce";
-        readonly type: "uint256";
-    }, {
-        readonly name: "expiresAt";
-        readonly type: "uint256";
-    }, {
-        readonly name: "scenario";
-        readonly type: "string";
-    }, {
-        readonly name: "issuerId";
-        readonly type: "string";
-    }];
-};
-/**
- * Build the EIP-712 domain object Privy verifier expects. Same
- * `chainId` as the SponsorAuth payload.
- */
-declare function buildSponsorAuthDomain(chainId: number): {
-    readonly name: "PAFI SponsorAuth";
-    readonly version: "1";
-    readonly chainId: number;
-    readonly verifyingContract: Address;
-};
-
-/**
- * Build the EIP-712 typed data object for a SponsorAuth payload.
- * Returned shape is compatible with `walletClient.signTypedData()`,
- * `viem.recoverTypedDataAddress()`, and any other EIP-712 tooling.
- *
- * Use this when you need the full typed-data object (e.g. to display
- * to a hardware-wallet user, or to feed into an off-chain audit log).
- * Most callers only need `signSponsorAuth` / `verifySponsorAuth` below.
- */
-declare function buildSponsorAuthTypedData(payload: SponsorAuthPayload): {
-    domain: {
-        readonly name: "PAFI SponsorAuth";
-        readonly version: "1";
-        readonly chainId: number;
-        readonly verifyingContract: Address;
-    };
-    types: {
-        readonly SponsorAuth: readonly [{
-            readonly name: "chainId";
-            readonly type: "uint256";
-        }, {
-            readonly name: "sender";
-            readonly type: "address";
-        }, {
-            readonly name: "callDataHash";
-            readonly type: "bytes32";
-        }, {
-            readonly name: "nonce";
-            readonly type: "uint256";
-        }, {
-            readonly name: "expiresAt";
-            readonly type: "uint256";
-        }, {
-            readonly name: "scenario";
-            readonly type: "string";
-        }, {
-            readonly name: "issuerId";
-            readonly type: "string";
-        }];
-    };
-    primaryType: "SponsorAuth";
-    message: {
-        chainId: bigint;
-        sender: `0x${string}`;
-        callDataHash: `0x${string}`;
-        nonce: bigint;
-        expiresAt: bigint;
-        scenario: SponsorAuthScenario;
-        issuerId: string;
-    };
-};
-/**
- * Sign a SponsorAuth payload using a viem `WalletClient`. Production
- * sponsor-relayer should use a KMS-backed signer instead — this helper
- * is for tests + local dev where you hold a raw private key.
- *
- * Returns the **serialized 65-byte signature** ready to put into
- * `SponsorAuthResponse.sponsorAuth`.
- */
-declare function signSponsorAuth(walletClient: WalletClient, payload: SponsorAuthPayload): Promise<Hex>;
-/**
- * Verify a SponsorAuth signature offline. Use to:
- *
- *   - Smoke-test that sponsor-relayer's output is well-formed (FE)
- *   - Unit tests in SDK
- *   - Defense-in-depth check before submitting to Privy
- *
- * Privy verifier does the same check on their side — this is NOT a
- * substitute for Privy verification. It exists so consumers can fail
- * fast on a mangled sig before round-tripping through Privy.
- *
- * @param payload          The exact payload PAFI BE returned
- * @param signature        The serialized signature (sponsorAuth field)
- * @param expectedSigner   PAFI's SponsorAuth signing-key address
- *                         (registered in Privy dashboard)
- *
- * @returns `true` if signature recovers to `expectedSigner`,
- *          and the payload hasn't expired (`expiresAt > now`).
- *          Returns `false` on any failure — does NOT throw.
- */
-declare function verifySponsorAuth(payload: SponsorAuthPayload, signature: Hex, expectedSigner: Address): Promise<{
-    ok: boolean;
-    reason?: "INVALID_SIGNER" | "EXPIRED" | "INVALID_SIGNATURE_FORMAT";
-    recoveredAddress?: Address;
-}>;
-/**
- * Helper — compute `callDataHash` from a UserOperation's `callData`.
- * Same hash function (`keccak256`) Privy verifier uses.
- *
- * Bind this hash into the SponsorAuth payload BEFORE signing, so the
- * sig is invalid for any other UserOp.
- */
-declare function computeCallDataHash(callData: Hex): Hex;
-
 /**
  * Real `PointToken` ABI — matches the contract deployed on Base mainnet
  * (POINT at `0x7d25E7156E51F865D522fd3ef257a6B5DD41b97e`). Sourced from
@@ -1489,4 +1293,4 @@ declare class PafiSDK {
     signLoginMessage(message: string): Promise<Hex>;
 }
 
-export { ApiError, BATCH_EXECUTOR_ABI, BATCH_EXECUTOR_ADDRESS_BASE_MAINNET, BATCH_EXECUTOR_ADDRESS_BASE_SEPOLIA, BROKER_HASHES, BestQuote, type BuildPartialUserOpParams, type BuildPerpDepositWithGasDeductionParams, COMMON_POOLS, COMMON_TOKENS, CONTRACT_ADDRESSES, ChainConfig, type CheckEthAndBranchParams, ConfigurationError, type ContractAddresses, EIP712Signature, LoginMessageParams, MintRequest, type ModalOpenOptions, ORDERLY_VAULT_ABI, ORDERLY_VAULT_ADDRESSES, ORDERLY_VAULT_BASE_MAINNET, Operation, POINT_TOKEN_FACTORY_ADDRESSES, POINT_TOKEN_IMPL_ADDRESSES, POINT_TOKEN_POOLS, POINT_TOKEN_ABI as POINT_TOKEN_V2_ABI, PafiSDK, PafiSDKConfig, PafiSDKError, type PafiWebModalAdapter, type PafiWebModalHandle, PartialUserOperation, type PaymasterConfig, PointTokenDomainConfig, PoolKey, QuoteResult, ReceiverConsent, SPONSOR_AUTH_DOMAIN_NAME, SPONSOR_AUTH_DOMAIN_VERSION, SPONSOR_AUTH_TYPES, SUPPORTED_CHAINS, type SignatureStruct, SignatureVerification, SigningError, SimulationError, type SponsorAuthPayload, type SponsorAuthPayloadExtended, type SponsorAuthScenario, type SponsorshipScenario, type SubmissionPath, SwapSimulationResult, TOKEN_HASHES, UNIVERSAL_ROUTER_ADDRESSES, UserOperation, V4_QUOTER_ADDRESSES, type VaultDepositFE, _resetPaymasterConfigForTests, assembleUserOperation, buildPartialUserOperation, buildPerpDepositWithGasDeduction, buildSponsorAuthDomain, buildSponsorAuthTypedData, burnRequestTypes, checkEthAndBranch, computeAccountId, computeCallDataHash, encodeBatchExecute, erc20ApproveOp, erc20BurnOp, erc20TransferOp, getContractAddresses, getPafiWebModalAdapter, getPaymasterConfig, isPaymasterConfigured, mintRequestTypes, openPafiWebModal, openWebPopup, rawCallOp, receiverConsentTypes, setPafiWebModalAdapter, setPaymasterConfig, signSponsorAuth, verifySponsorAuth, webPopupAdapter };
+export { ApiError, BATCH_EXECUTOR_ABI, BATCH_EXECUTOR_ADDRESS_BASE_MAINNET, BATCH_EXECUTOR_ADDRESS_BASE_SEPOLIA, BROKER_HASHES, BestQuote, type BuildPartialUserOpParams, type BuildPerpDepositWithGasDeductionParams, COMMON_POOLS, COMMON_TOKENS, CONTRACT_ADDRESSES, ChainConfig, type CheckEthAndBranchParams, ConfigurationError, type ContractAddresses, EIP712Signature, LoginMessageParams, MintRequest, type ModalOpenOptions, ORDERLY_VAULT_ABI, ORDERLY_VAULT_ADDRESSES, ORDERLY_VAULT_BASE_MAINNET, Operation, POINT_TOKEN_FACTORY_ADDRESSES, POINT_TOKEN_IMPL_ADDRESSES, POINT_TOKEN_POOLS, POINT_TOKEN_ABI as POINT_TOKEN_V2_ABI, PafiSDK, PafiSDKConfig, PafiSDKError, type PafiWebModalAdapter, type PafiWebModalHandle, PartialUserOperation, type PaymasterConfig, PointTokenDomainConfig, PoolKey, QuoteResult, ReceiverConsent, SUPPORTED_CHAINS, type SignatureStruct, SignatureVerification, SigningError, SimulationError, type SponsorshipScenario, type SubmissionPath, SwapSimulationResult, TOKEN_HASHES, UNIVERSAL_ROUTER_ADDRESSES, UserOperation, V4_QUOTER_ADDRESSES, type VaultDepositFE, _resetPaymasterConfigForTests, assembleUserOperation, buildPartialUserOperation, buildPerpDepositWithGasDeduction, burnRequestTypes, checkEthAndBranch, computeAccountId, encodeBatchExecute, erc20ApproveOp, erc20BurnOp, erc20TransferOp, getContractAddresses, getPafiWebModalAdapter, getPaymasterConfig, isPaymasterConfigured, mintRequestTypes, openPafiWebModal, openWebPopup, rawCallOp, receiverConsentTypes, setPafiWebModalAdapter, setPaymasterConfig, webPopupAdapter };

package/dist/index.js

@@ -280,101 +280,6 @@ async function checkEthAndBranch(params) {
   return balance >= required ? "normal" : "paymaster";
 }
 
-// src/sponsor-auth/types.ts
-var SPONSOR_AUTH_DOMAIN_NAME = "PAFI SponsorAuth";
-var SPONSOR_AUTH_DOMAIN_VERSION = "1";
-var SPONSOR_AUTH_TYPES = {
-  SponsorAuth: [
-    { name: "chainId", type: "uint256" },
-    { name: "sender", type: "address" },
-    { name: "callDataHash", type: "bytes32" },
-    { name: "nonce", type: "uint256" },
-    { name: "expiresAt", type: "uint256" },
-    { name: "scenario", type: "string" },
-    { name: "issuerId", type: "string" }
-  ]
-};
-function buildSponsorAuthDomain(chainId) {
-  return {
-    name: SPONSOR_AUTH_DOMAIN_NAME,
-    version: SPONSOR_AUTH_DOMAIN_VERSION,
-    chainId,
-    verifyingContract: "0x0000000000000000000000000000000000000000"
-  };
-}
-
-// src/sponsor-auth/sign.ts
-import {
-  keccak256 as keccak2562,
-  parseSignature,
-  recoverTypedDataAddress
-} from "viem";
-function buildSponsorAuthTypedData(payload) {
-  return {
-    domain: buildSponsorAuthDomain(payload.chainId),
-    types: SPONSOR_AUTH_TYPES,
-    primaryType: "SponsorAuth",
-    // viem strictly types uint256 fields as `bigint`. Our payload keeps
-    // `chainId` + `expiresAt` as `number` for ergonomic JS use; cast
-    // here at the EIP-712 boundary. Runtime conversion handled by viem.
-    message: toEip712Message(payload)
-  };
-}
-async function signSponsorAuth(walletClient, payload) {
-  return walletClient.signTypedData({
-    account: walletClient.account,
-    domain: buildSponsorAuthDomain(payload.chainId),
-    types: SPONSOR_AUTH_TYPES,
-    primaryType: "SponsorAuth",
-    // See note in buildSponsorAuthTypedData about the cast.
-    message: toEip712Message(payload)
-  });
-}
-async function verifySponsorAuth(payload, signature, expectedSigner) {
-  try {
-    parseSignature(signature);
-  } catch {
-    return { ok: false, reason: "INVALID_SIGNATURE_FORMAT" };
-  }
-  if (payload.expiresAt < Math.floor(Date.now() / 1e3)) {
-    return { ok: false, reason: "EXPIRED" };
-  }
-  let recovered;
-  try {
-    recovered = await recoverTypedDataAddress({
-      domain: buildSponsorAuthDomain(payload.chainId),
-      types: SPONSOR_AUTH_TYPES,
-      primaryType: "SponsorAuth",
-      message: toEip712Message(payload),
-      signature
-    });
-  } catch {
-    return { ok: false, reason: "INVALID_SIGNATURE_FORMAT" };
-  }
-  if (recovered.toLowerCase() !== expectedSigner.toLowerCase()) {
-    return {
-      ok: false,
-      reason: "INVALID_SIGNER",
-      recoveredAddress: recovered
-    };
-  }
-  return { ok: true, recoveredAddress: recovered };
-}
-function computeCallDataHash(callData) {
-  return keccak2562(callData);
-}
-function toEip712Message(payload) {
-  return {
-    chainId: BigInt(payload.chainId),
-    sender: payload.sender,
-    callDataHash: payload.callDataHash,
-    nonce: payload.nonce,
-    expiresAt: BigInt(payload.expiresAt),
-    scenario: payload.scenario,
-    issuerId: payload.issuerId
-  };
-}
-
 // src/contracts/real/pointToken.ts
 import { parseAbi } from "viem";
 var POINT_TOKEN_ABI = parseAbi([
@@ -801,9 +706,6 @@ export {
   PafiSDK,
   PafiSDKError,
   SETTLE_ALL,
-  SPONSOR_AUTH_DOMAIN_NAME,
-  SPONSOR_AUTH_DOMAIN_VERSION,
-  SPONSOR_AUTH_TYPES,
   SUPPORTED_CHAINS,
   SWAP_EXACT_IN,
   SigningError,
@@ -825,8 +727,6 @@ export {
   buildPermit2ApprovalCalldata,
   buildPerpDepositWithGasDeduction,
   buildReceiverConsentTypedData,
-  buildSponsorAuthDomain,
-  buildSponsorAuthTypedData,
   buildSwapFromQuote,
   buildSwapWithGasDeduction,
   buildUniversalRouterExecuteArgs,
@@ -836,7 +736,6 @@ export {
   checkEthAndBranch,
   combineRoutes,
   computeAccountId,
-  computeCallDataHash,
   createLoginMessage,
   encodeBatchExecute,
   erc20Abi,
@@ -876,7 +775,6 @@ export {
   signBurnRequest,
   signMintRequest,
   signReceiverConsent,
-  signSponsorAuth,
   simulateSwap,
   universalRouterAbi,
   v4QuoterAbi,
@@ -885,7 +783,6 @@ export {
   verifyMintCap,
   verifyMintRequest,
   verifyReceiverConsent,
-  verifySponsorAuth,
   webPopupAdapter
 };
 //# sourceMappingURL=index.js.map