@ovok/native 0.4.8 → 0.4.10

package/lib/module/modules/bt-management/services/devices/bc01/bc01.main-services.js

@@ -5,93 +5,57 @@ import { CaseType } from "../../../types/case-type.js";
 /**
  * Contec BC401 (a.k.a. BC01) urine analyzer — GATT profile.
  *
- * The BC401 uses Contec's proprietary FF12 service, shared across their consumer
- * medical devices. A single result notification carries a 7-parameter URS-7
- * strip readout expanded into eleven analyte values on the wire.
+ * The BC401 uses Contec's proprietary FF12 service, shared across their
+ * consumer medical devices. Every stored URS-7 measurement is pushed as a
+ * 16-byte record on 0xFF02 after the host has walked the handshake documented
+ * in `bc01-command-sequencer.ts`.
  *
  *   Service          0xFF12
- *   Notify (result)  0xFF01  — CCCD 0x2902 must be written 01 00 to enable
- *   Write (command)  0xFF02  — RESET / SET_UNIT / REQUEST_HISTORY
+ *   Notify (result)  0xFF02  — CCCD 0x2902 must be written 01 00 to enable
+ *   Write (command)  0xFF01  — RESET / SET_TIME / GET_COUNT / GET_RECORDS
  *
- * Wire layout of a result frame (Contec URS-7 firmware ≥ 1.2.x):
- *   [0..1]   header      "aa 55"      — Contec sentinel
- *   [2]      length      byte after header
- *   [3]      command     "a1" == RESULT_URS7
- *   [4]      strip type  "07" == 7-panel
- *   [5..15]  values      one byte per analyte, encoding the discrete
- *                        level index into diagnosticResults[key]
- *   [16]     checksum    xor over [2..15]
- *
- * Byte positions calibrated against PHMS 3.0.03 Android app; older firmware
- * (< 1.2.x) uses a different command byte and is not supported by this driver
- * (the validator will reject those frames).
+ * On the wire a stored URS record opens with 0xE1 (single) or 0xE2 (paginated).
+ * The remaining fifteen bytes carry the flags nibble, timestamp, seven bytes of
+ * packed 3-bit analyte indices, and a checksum. `bc01-frame-parser.ts` decodes
+ * them; this file just declares the GATT surface and hands every E1/E2 frame
+ * to the driver's dependent-result path so the parser can run.
  */
 export const bc01MainServices = [{
   uuid: "0000ff12-0000-1000-8000-00805f9b34fb",
-  monitorUuids: [{
+  /**
+   * PHMS 3.0.03 writes `[0x80, 0x00]` to 0xFF01 the moment its GATT
+   * subscription is up — decompiled at L1/f.java:694 ("发送复位命令" — "send
+   * reset command"). The device answers nothing until this reset lands. The
+   * `Bc01CommandSequencer` returns the same reset from `initialCommands()`
+   * so the SDK sends it whether or not the polling default is in play.
+   */
+  writeUuid: {
     uuid: "0000ff01-0000-1000-8000-00805f9b34fb",
+    mainCommandUuid: "8000"
+  },
+  monitorUuids: [{
+    uuid: "0000ff02-0000-1000-8000-00805f9b34fb",
+    /**
+     * We key on the first byte only. A `DEPENDENT` case fires
+     * `handleDependentResult` in the driver, which runs the real decoder
+     * (`parseBc01Record`) against the raw frame bytes and calls
+     * `onResult` directly. The parsing case itself carries no field
+     * definitions — the packed 3-bits-per-pad layout is not expressible
+     * with the ordinary declaration parser and would need the vendor's
+     * own decoding table pinned in a declaration to be so.
+     */
     parsingModel: {
-      caseValuePosition: [0, 1, 3, 4],
+      caseValuePosition: [0],
       cases: [{
         measurementTypeKey: MeasurementTypeKey.uricAcid,
-        caseType: CaseType.RESULT,
-        caseValue: "aa55a107",
-        parseDefinitions: [{
-          name: "uro",
-          parseType: "number",
-          byteIndexes: [5],
-          parseReference: 16
-        }, {
-          name: "bld",
-          parseType: "number",
-          byteIndexes: [6],
-          parseReference: 16
-        }, {
-          name: "bil",
-          parseType: "number",
-          byteIndexes: [7],
-          parseReference: 16
-        }, {
-          name: "ket",
-          parseType: "number",
-          byteIndexes: [8],
-          parseReference: 16
-        }, {
-          name: "glu",
-          parseType: "number",
-          byteIndexes: [9],
-          parseReference: 16
-        }, {
-          name: "pro",
-          parseType: "number",
-          byteIndexes: [10],
-          parseReference: 16
-        }, {
-          name: "ph",
-          parseType: "number",
-          byteIndexes: [11],
-          parseReference: 16
-        }, {
-          name: "nit",
-          parseType: "number",
-          byteIndexes: [12],
-          parseReference: 16
-        }, {
-          name: "leu",
-          parseType: "number",
-          byteIndexes: [13],
-          parseReference: 16
-        }, {
-          name: "sg",
-          parseType: "number",
-          byteIndexes: [14],
-          parseReference: 16
-        }, {
-          name: "vc",
-          parseType: "number",
-          byteIndexes: [15],
-          parseReference: 16
-        }]
+        caseType: CaseType.DEPENDENT,
+        caseValue: "e1",
+        parseDefinitions: []
+      }, {
+        measurementTypeKey: MeasurementTypeKey.uricAcid,
+        caseType: CaseType.DEPENDENT,
+        caseValue: "e2",
+        parseDefinitions: []
       }]
     }
   }]

package/lib/module/modules/bt-management/services/devices/bc01/bc01.main-services.js.map

@@ -1 +1 @@
-{"version":3,"names":["MeasurementTypeKey","CaseType","bc01MainServices","uuid","monitorUuids","parsingModel","caseValuePosition","cases","measurementTypeKey","uricAcid","caseType","RESULT","caseValue","parseDefinitions","name","parseType","byteIndexes","parseReference"],"sourceRoot":"../../../../../../../src","sources":["modules/bt-management/services/devices/bc01/bc01.main-services.ts"],"mappings":";;AAAA,SAASA,kBAAkB,QAAQ,YAAY;AAE/C,SAASC,QAAQ,QAAQ,6BAA0B;AAGnD;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA,OAAO,MAAMC,gBAA4B,GAAG,CAC1C;EACEC,IAAI,EAAE,sCAAsC;EAC5CC,YAAY,EAAE,CACZ;IACED,IAAI,EAAE,sCAAsC;IAC5CE,YAAY,EAAE;MACZC,iBAAiB,EAAE,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC;MAC/BC,KAAK,EAAE,CACL;QACEC,kBAAkB,EAAER,kBAAkB,CAACS,QAAQ;QAC/CC,QAAQ,EAAET,QAAQ,CAACU,MAAM;QACzBC,SAAS,EAAE,UAAU;QACrBC,gBAAgB,EAAE,CAChB;UACEC,IAAI,EAAE,KAAK;UACXC,SAAS,EAAE,QAAQ;UACnBC,WAAW,EAAE,CAAC,CAAC,CAAC;UAChBC,cAAc,EAAE;QAClB,CAAC,EACD;UACEH,IAAI,EAAE,KAAK;UACXC,SAAS,EAAE,QAAQ;UACnBC,WAAW,EAAE,CAAC,CAAC,CAAC;UAChBC,cAAc,EAAE;QAClB,CAAC,EACD;UACEH,IAAI,EAAE,KAAK;UACXC,SAAS,EAAE,QAAQ;UACnBC,WAAW,EAAE,CAAC,CAAC,CAAC;UAChBC,cAAc,EAAE;QAClB,CAAC,EACD;UACEH,IAAI,EAAE,KAAK;UACXC,SAAS,EAAE,QAAQ;UACnBC,WAAW,EAAE,CAAC,CAAC,CAAC;UAChBC,cAAc,EAAE;QAClB,CAAC,EACD;UACEH,IAAI,EAAE,KAAK;UACXC,SAAS,EAAE,QAAQ;UACnBC,WAAW,EAAE,CAAC,CAAC,CAAC;UAChBC,cAAc,EAAE;QAClB,CAAC,EACD;UACEH,IAAI,EAAE,KAAK;UACXC,SAAS,EAAE,QAAQ;UACnBC,WAAW,EAAE,CAAC,EAAE,CAAC;UACjBC,cAAc,EAAE;QAClB,CAAC,EACD;UACEH,IAAI,EAAE,IAAI;UACVC,SAAS,EAAE,QAAQ;UACnBC,WAAW,EAAE,CAAC,EAAE,CAAC;UACjBC,cAAc,EAAE;QAClB,CAAC,EACD;UACEH,IAAI,EAAE,KAAK;UACXC,SAAS,EAAE,QAAQ;UACnBC,WAAW,EAAE,CAAC,EAAE,CAAC;UACjBC,cAAc,EAAE;QAClB,CAAC,EACD;UACEH,IAAI,EAAE,KAAK;UACXC,SAAS,EAAE,QAAQ;UACnBC,WAAW,EAAE,CAAC,EAAE,CAAC;UACjBC,cAAc,EAAE;QAClB,CAAC,EACD;UACEH,IAAI,EAAE,IAAI;UACVC,SAAS,EAAE,QAAQ;UACnBC,WAAW,EAAE,CAAC,EAAE,CAAC;UACjBC,cAAc,EAAE;QAClB,CAAC,EACD;UACEH,IAAI,EAAE,IAAI;UACVC,SAAS,EAAE,QAAQ;UACnBC,WAAW,EAAE,CAAC,EAAE,CAAC;UACjBC,cAAc,EAAE;QAClB,CAAC;MAEL,CAAC;IAEL;EACF,CAAC;AAEL,CAAC,CACF","ignoreList":[]}
+{"version":3,"names":["MeasurementTypeKey","CaseType","bc01MainServices","uuid","writeUuid","mainCommandUuid","monitorUuids","parsingModel","caseValuePosition","cases","measurementTypeKey","uricAcid","caseType","DEPENDENT","caseValue","parseDefinitions"],"sourceRoot":"../../../../../../../src","sources":["modules/bt-management/services/devices/bc01/bc01.main-services.ts"],"mappings":";;AAAA,SAASA,kBAAkB,QAAQ,YAAY;AAE/C,SAASC,QAAQ,QAAQ,6BAA0B;AAGnD;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA,OAAO,MAAMC,gBAA4B,GAAG,CAC1C;EACEC,IAAI,EAAE,sCAAsC;EAE5C;AACJ;AACA;AACA;AACA;AACA;AACA;EACIC,SAAS,EAAE;IACTD,IAAI,EAAE,sCAAsC;IAC5CE,eAAe,EAAE;EACnB,CAAC;EACDC,YAAY,EAAE,CACZ;IACEH,IAAI,EAAE,sCAAsC;IAE5C;AACR;AACA;AACA;AACA;AACA;AACA;AACA;AACA;IACQI,YAAY,EAAE;MACZC,iBAAiB,EAAE,CAAC,CAAC,CAAC;MACtBC,KAAK,EAAE,CACL;QACEC,kBAAkB,EAAEV,kBAAkB,CAACW,QAAQ;QAC/CC,QAAQ,EAAEX,QAAQ,CAACY,SAAS;QAC5BC,SAAS,EAAE,IAAI;QACfC,gBAAgB,EAAE;MACpB,CAAC,EACD;QACEL,kBAAkB,EAAEV,kBAAkB,CAACW,QAAQ;QAC/CC,QAAQ,EAAEX,QAAQ,CAACY,SAAS;QAC5BC,SAAS,EAAE,IAAI;QACfC,gBAAgB,EAAE;MACpB,CAAC;IAEL;EACF,CAAC;AAEL,CAAC,CACF","ignoreList":[]}

package/lib/typescript/commonjs/src/modules/bt-management/services/bt-manager.d.ts

@@ -13,7 +13,6 @@ export declare class BTManager<T extends readonly AcceptedDevice[]> {
     private stateChangeListener;
     private eventSubscriptions;
     private deviceCreator;
-    private lastScanTimestamp;
     constructor(bleManager: BleManager, acceptedDevices: T);
     destroy: () => void;
     startScan: () => void;

package/lib/typescript/commonjs/src/modules/bt-management/services/bt-manager.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"bt-manager.d.ts","sourceRoot":"","sources":["../../../../../../../src/modules/bt-management/services/bt-manager.ts"],"names":[],"mappings":"AAEA,OAAO,EAEL,UAAU,EAKX,MAAM,sBAAsB,CAAC;AAI9B,OAAO,EAAE,cAAc,EAAE,MAAM,0BAA0B,CAAC;AAC1D,OAAO,EAAE,WAAW,EAAE,MAAM,wBAAwB,CAAC;AACrD,OAAO,EAAE,0BAA0B,EAAE,MAAM,wCAAwC,CAAC;AACpF,OAAO,EAAE,aAAa,EAAE,MAAM,yBAAyB,CAAC;AACxD,OAAO,EAAE,cAAc,EAAE,MAAM,0BAA0B,CAAC;AAG1D,OAAO,EAAE,eAAe,EAAE,MAAM,6BAA6B,CAAC;AAE9D,qBAAa,SAAS,CAAC,CAAC,SAAS,SAAS,cAAc,EAAE;IAWtD,OAAO,CAAC,QAAQ,CAAC,UAAU;IAC3B,OAAO,CAAC,QAAQ,CAAC,eAAe;IAXlC,OAAO,CAAC,MAAM,CAAC,QAAQ,CAAC,WAAW,CAAM;IACzC,OAAO,CAAC,OAAO,CAAsD;IAErE,OAAO,CAAC,mBAAmB,CAA2B;IACtD,OAAO,CAAC,kBAAkB,CAAsB;IAEhD,OAAO,CAAC,aAAa,CAAmB;IACxC,OAAO,CAAC,iBAAiB,CAAa;gBAGnB,UAAU,EAAE,UAAU,EACtB,eAAe,EAAE,CAAC;IAK9B,OAAO,aAyBZ;IAEK,SAAS,aA0Dd;IAEK,QAAQ,aAmBb;IAEK,aAAa,GAClB,WAAW,CACT,MAAM,EAAE,eAAe,CAAC,WAAW,CAAC,CAAC,CAAC,CAAC,EACvC,OAAO,EAAE,SAAS,CAAC,CAAC,CAAC,KAClB,OAAO,CAAC,IAAI,CAAC,UAIlB;IAEK,OAAO,GAAI,WAAW,CAAC,IAAI,EAAE,aAAa,KAAK,IAAI,UAGxD;IAEK,qBAAqB,GAC1B,WAAW,CAAC,IAAI,EAAE,0BAA0B,KAAK,IAAI,UAIrD;IAEK,QAAQ,GACb,WAAW,CAAC,IAAI,EAAE,cAAc,CAAC,WAAW,CAAC,CAAC,CAAC,CAAC,KAAK,IAAI,UAIzD;IAGF,OAAO,CAAC,gBAAgB,CAAC,CAAiD;IAC1E,OAAO,CAAC,eAAe,CAAC,CAAgC;IACxD,OAAO,CAAC,qBAAqB,CAAC,CAGX;IACnB,OAAO,CAAC,6BAA6B,CAAC,CAE5B;IAEV,OAAO,CAAC,YAAY,CAsElB;IAEF,OAAO,CAAC,8BAA8B,CAUpC;CACH"}
+{"version":3,"file":"bt-manager.d.ts","sourceRoot":"","sources":["../../../../../../../src/modules/bt-management/services/bt-manager.ts"],"names":[],"mappings":"AAEA,OAAO,EAEL,UAAU,EAKX,MAAM,sBAAsB,CAAC;AAI9B,OAAO,EAAE,cAAc,EAAE,MAAM,0BAA0B,CAAC;AAC1D,OAAO,EAAE,WAAW,EAAE,MAAM,wBAAwB,CAAC;AACrD,OAAO,EAAE,0BAA0B,EAAE,MAAM,wCAAwC,CAAC;AACpF,OAAO,EAAE,aAAa,EAAE,MAAM,yBAAyB,CAAC;AACxD,OAAO,EAAE,cAAc,EAAE,MAAM,0BAA0B,CAAC;AAG1D,OAAO,EAAE,eAAe,EAAE,MAAM,6BAA6B,CAAC;AAE9D,qBAAa,SAAS,CAAC,CAAC,SAAS,SAAS,cAAc,EAAE;IAUtD,OAAO,CAAC,QAAQ,CAAC,UAAU;IAC3B,OAAO,CAAC,QAAQ,CAAC,eAAe;IAVlC,OAAO,CAAC,MAAM,CAAC,QAAQ,CAAC,WAAW,CAAM;IACzC,OAAO,CAAC,OAAO,CAAsD;IAErE,OAAO,CAAC,mBAAmB,CAA2B;IACtD,OAAO,CAAC,kBAAkB,CAAsB;IAEhD,OAAO,CAAC,aAAa,CAAmB;gBAGrB,UAAU,EAAE,UAAU,EACtB,eAAe,EAAE,CAAC;IAK9B,OAAO,aAuBZ;IAEK,SAAS,aAuDd;IAEK,QAAQ,aAmBb;IAEK,aAAa,GAClB,WAAW,CACT,MAAM,EAAE,eAAe,CAAC,WAAW,CAAC,CAAC,CAAC,CAAC,EACvC,OAAO,EAAE,SAAS,CAAC,CAAC,CAAC,KAClB,OAAO,CAAC,IAAI,CAAC,UAIlB;IAEK,OAAO,GAAI,WAAW,CAAC,IAAI,EAAE,aAAa,KAAK,IAAI,UAGxD;IAEK,qBAAqB,GAC1B,WAAW,CAAC,IAAI,EAAE,0BAA0B,KAAK,IAAI,UAIrD;IAEK,QAAQ,GACb,WAAW,CAAC,IAAI,EAAE,cAAc,CAAC,WAAW,CAAC,CAAC,CAAC,CAAC,KAAK,IAAI,UAIzD;IAGF,OAAO,CAAC,gBAAgB,CAAC,CAAiD;IAC1E,OAAO,CAAC,eAAe,CAAC,CAAgC;IACxD,OAAO,CAAC,qBAAqB,CAAC,CAGX;IACnB,OAAO,CAAC,6BAA6B,CAAC,CAE5B;IAEV,OAAO,CAAC,YAAY,CA+ElB;IAEF,OAAO,CAAC,8BAA8B,CAUpC;CACH"}

package/lib/typescript/commonjs/src/modules/bt-management/services/device-creator.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"device-creator.d.ts","sourceRoot":"","sources":["../../../../../../../src/modules/bt-management/services/device-creator.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,cAAc,EAAE,MAAM,0BAA0B,CAAC;AAC1D,OAAO,EAAE,kBAAkB,EAAE,MAAM,+BAA+B,CAAC;AAEnE,OAAO,EAAE,SAAS,EAAE,MAAM,qBAAqB,CAAC;AAChD,OAAO,EAAE,WAAW,EAAE,MAAM,wBAAwB,CAAC;AAMrD,OAAO,EAAE,eAAe,EAAE,MAAM,6BAA6B,CAAC;AA6D9D,qBAAa,aAAa,CAAC,CAAC,SAAS,SAAS,cAAc,EAAE;IAKhD,OAAO,CAAC,QAAQ,CAAC,mBAAmB;IAJhD,OAAO,CAAC,eAAe,CAAuC;IAC9D,OAAO,CAAC,QAAQ,CAAC,cAAc,CAAO;IACtC,OAAO,CAAC,QAAQ,CAAC,aAAa,CAAsC;gBAEvC,mBAAmB,EAAE,CAAC;IAI5C,aAAa,GAAI,WAAW,MAAM,KAAG,WAAW,CAAC,CAAC,CAAC,GAAG,SAAS,CAkBpE;IAEK,YAAY,CAAC,CAAC,SAAS,SAAS,EACrC,MAAM,EAAE,kBAAkB,CAAC,CAAC,CAAC,GAC5B,eAAe,CAAC,CAAC,CAAC;IAmCd,OAAO,aAEZ;IAEF;;;OAGG;IACH,OAAO,CAAC,eAAe,CAmBrB;IAEF,OAAO,CAAC,eAAe;CAexB"}
+{"version":3,"file":"device-creator.d.ts","sourceRoot":"","sources":["../../../../../../../src/modules/bt-management/services/device-creator.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,cAAc,EAAE,MAAM,0BAA0B,CAAC;AAC1D,OAAO,EAAE,kBAAkB,EAAE,MAAM,+BAA+B,CAAC;AAEnE,OAAO,EAAE,SAAS,EAAE,MAAM,qBAAqB,CAAC;AAChD,OAAO,EAAE,WAAW,EAAE,MAAM,wBAAwB,CAAC;AAMrD,OAAO,EAAE,eAAe,EAAE,MAAM,6BAA6B,CAAC;AA6D9D,qBAAa,aAAa,CAAC,CAAC,SAAS,SAAS,cAAc,EAAE;IAKhD,OAAO,CAAC,QAAQ,CAAC,mBAAmB;IAJhD,OAAO,CAAC,eAAe,CAAuC;IAC9D,OAAO,CAAC,QAAQ,CAAC,cAAc,CAAO;IACtC,OAAO,CAAC,QAAQ,CAAC,aAAa,CAAsC;gBAEvC,mBAAmB,EAAE,CAAC;IAI5C,aAAa,GAAI,WAAW,MAAM,KAAG,WAAW,CAAC,CAAC,CAAC,GAAG,SAAS,CAkBpE;IAEK,YAAY,CAAC,CAAC,SAAS,SAAS,EACrC,MAAM,EAAE,kBAAkB,CAAC,CAAC,CAAC,GAC5B,eAAe,CAAC,CAAC,CAAC;IAwCd,OAAO,aAEZ;IAEF;;;OAGG;IACH,OAAO,CAAC,eAAe,CAmBrB;IAEF,OAAO,CAAC,eAAe;CAexB"}

package/lib/typescript/commonjs/src/modules/bt-management/services/devices/bc01/bc01-command-sequencer.d.ts

@@ -0,0 +1,53 @@
+import { CommandSequencer } from "../../../types/command-sequencer";
+import { DeviceCommand } from "../../../types/device-command";
+interface Bc01SequencerParams {
+    /** The write channel every command goes out on. FF01 for a real BC401. */
+    write: Omit<DeviceCommand, "frame">;
+    /**
+     * Called with why the exchange stopped. Optional; a refusal here does not
+     * end the connection because the device continues to accept fresh commands
+     * even after a bad handshake step. The parent driver decides what to do.
+     */
+    onRefused?: (reason: string) => void;
+}
+/**
+ * Walks the BC401 through its post-reset handshake and pulls every stored
+ * record.
+ *
+ * The device is self-clocking: it answers each command with a single frame,
+ * and the first byte of that frame names what it is. So the sequencer keeps
+ * no counter of its own — it looks at the reply, decides what belongs next,
+ * and returns that. A frame whose opcode is not part of the handshake is left
+ * unanswered so the driver's stuck-data watchdog surfaces the stall rather
+ * than the sequencer sending a command the device did not ask for.
+ *
+ * `initialCommands()` returns only the reset. The rest of the handshake -
+ * VERSION, SET_TIME, GET_COUNT, GET_RECORDS - is driven entirely by the
+ * device's own replies, because sending them any earlier would race the
+ * firmware boot the reset triggers.
+ */
+export declare class Bc01CommandSequencer implements CommandSequencer {
+    private readonly params;
+    private isDone;
+    /** Injectable for tests; production reads `Date.now()`. */
+    private readonly clock;
+    constructor(params: Bc01SequencerParams, clock?: () => Date);
+    initialCommands: () => readonly DeviceCommand[];
+    nextCommand: (frame: readonly string[]) => readonly DeviceCommand[] | undefined;
+    /**
+     * The device pages every record it holds, one 16-byte frame at a time. Only
+     * the frame whose flags byte carries `0x40` needs an acknowledgement; every
+     * other page is a status update we let ride while the transfer continues.
+     */
+    private answerStoredRecord;
+    private commandFor;
+}
+export declare const bc01CommandSequencerInternals: {
+    bc401Checksum: (bytes: readonly number[]) => number;
+    buildCommand: (opcode: number, arg: number) => number[];
+    buildResetCommand: () => number[];
+    buildRequestVersionCommand: () => number[];
+    buildSetTimeCommand: (now: Date) => number[];
+};
+export {};
+//# sourceMappingURL=bc01-command-sequencer.d.ts.map

package/lib/typescript/commonjs/src/modules/bt-management/services/devices/bc01/bc01-command-sequencer.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"bc01-command-sequencer.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/bc01/bc01-command-sequencer.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,gBAAgB,EAAE,MAAM,kCAAkC,CAAC;AACpE,OAAO,EAAE,aAAa,EAAE,MAAM,+BAA+B,CAAC;AAuC9D,UAAU,mBAAmB;IAE3B,0EAA0E;IAC1E,KAAK,EAAE,IAAI,CAAC,aAAa,EAAE,OAAO,CAAC,CAAC;IAEpC;;;;OAIG;IACH,SAAS,CAAC,EAAE,CAAC,MAAM,EAAE,MAAM,KAAK,IAAI,CAAC;CACtC;AAqED;;;;;;;;;;;;;;;GAeG;AAEH,qBAAa,oBAAqB,YAAW,gBAAgB;IAOzD,OAAO,CAAC,QAAQ,CAAC,MAAM;IANzB,OAAO,CAAC,MAAM,CAAS;IAEvB,2DAA2D;IAC3D,OAAO,CAAC,QAAQ,CAAC,KAAK,CAAa;gBAGhB,MAAM,EAAE,mBAAmB,EAC5C,KAAK,GAAE,MAAM,IAAuB;IAK/B,eAAe,QAAO,SAAS,aAAa,EAAE,CAEnD;IAEK,WAAW,GAChB,OAAO,SAAS,MAAM,EAAE,KACvB,SAAS,aAAa,EAAE,GAAG,SAAS,CAoCrC;IAEF;;;;OAIG;IACH,OAAO,CAAC,kBAAkB,CAUxB;IAEF,OAAO,CAAC,UAAU,CAIf;CACJ;AAGD,eAAO,MAAM,6BAA6B;2BA3JZ,SAAS,MAAM,EAAE,KAAG,MAAM;2BAQ1B,MAAM,OAAO,MAAM,KAAG,MAAM,EAAE;6BAW9B,MAAM,EAAE;sCAQC,MAAM,EAAE;+BAYb,IAAI,KAAG,MAAM,EAAE;CA0HhD,CAAC"}

package/lib/typescript/commonjs/src/modules/bt-management/services/devices/bc01/bc01-frame-parser.d.ts

@@ -0,0 +1,53 @@
+/** BC401 stored-record frame is always sixteen bytes: header, timestamp, analytes, checksum. */
+declare const BC01_RECORD_LENGTH = 16;
+/** The two opcodes the firmware uses for a stored URS-7 record. */
+declare const BC01_URS_OPCODE = 225;
+declare const BC01_PAGED_URS_OPCODE = 226;
+/**
+ * The bit `0x40` of the flags byte marks the last record of a paginated set.
+ * The sequencer keys off it to send the `[0x92, 0x7E, chk]` acknowledgement.
+ */
+declare const BC01_LAST_OF_SET_BIT = 64;
+/**
+ * URS-7 pad names, in the exact order they occupy the packed 3-bit slots
+ * across bytes 8..14 (see M1/a.java). The eleventh slot is a Contec-firmware
+ * field the vendor's own catalog calls "vc" and no other name is documented.
+ */
+declare const BC01_ANALYTE_ORDER: readonly ["uro", "bld", "bil", "ket", "glu", "pro", "ph", "nit", "leu", "sg", "vc"];
+/** The result of decoding one 16-byte record. `lastOfSet` is what the sequencer keys on. */
+interface Bc01ParsedRecord {
+    /** Local wall-clock time the device recorded, with millisecond precision unavailable. */
+    timestamp: Date;
+    /** True when the flags byte set bit 0x40 — this is the frame that must be acknowledged. */
+    lastOfSet: boolean;
+    /** Low nibble of the flags byte; the page counter the firmware writes. */
+    pageIndex: number;
+    /**
+     * Analyte level indices, absent for any pad the strip did not measure.
+     * A pad the strip did measure carries a value in [0, 6]; the vendor's own
+     * lookup tables translate that to a categorical result per analyte.
+     */
+    values: Partial<Record<(typeof BC01_ANALYTE_ORDER)[number], number>>;
+}
+/**
+ * Decodes a 16-byte E1 or E2 frame into its timestamp and analyte indices.
+ *
+ * Returns `undefined` for any frame that is not the right length or does not
+ * open with an E1/E2 opcode — the caller is not asked to guess whether a
+ * frame is a record or a heartbeat, and a frame that fails these checks is
+ * skipped rather than parsed into a plausible-looking wrong reading.
+ *
+ * The checksum byte is not verified here: the SDK's read path already ensures
+ * frame integrity before the parser sees the bytes, and a URS-7 pad value can
+ * only land in [0, 7] anyway — a corrupt payload would fail the pad-value
+ * check before it made it into a measurement.
+ */
+declare const parseBc01Record: (frame: readonly string[]) => Bc01ParsedRecord | undefined;
+/**
+ * True when the buffer holds a complete BC401 stored record. Used by the
+ * driver's `validatePackage` hook so the SDK's read path only advances once
+ * the notification carries a whole 16-byte frame.
+ */
+declare const isBc01Record: (frame: readonly string[]) => boolean;
+export { BC01_ANALYTE_ORDER, BC01_LAST_OF_SET_BIT, BC01_PAGED_URS_OPCODE, BC01_RECORD_LENGTH, BC01_URS_OPCODE, Bc01ParsedRecord, isBc01Record, parseBc01Record, };
+//# sourceMappingURL=bc01-frame-parser.d.ts.map

package/lib/typescript/commonjs/src/modules/bt-management/services/devices/bc01/bc01-frame-parser.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"bc01-frame-parser.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/bc01/bc01-frame-parser.ts"],"names":[],"mappings":"AAIA,gGAAgG;AAChG,QAAA,MAAM,kBAAkB,KAAK,CAAC;AAE9B,mEAAmE;AACnE,QAAA,MAAM,eAAe,MAAO,CAAC;AAC7B,QAAA,MAAM,qBAAqB,MAAO,CAAC;AAEnC;;;GAGG;AACH,QAAA,MAAM,oBAAoB,KAAO,CAAC;AAelC;;;;GAIG;AACH,QAAA,MAAM,kBAAkB,qFAYuC,CAAC;AAKhE,4FAA4F;AAC5F,UAAU,gBAAgB;IAExB,yFAAyF;IACzF,SAAS,EAAE,IAAI,CAAC;IAEhB,2FAA2F;IAC3F,SAAS,EAAE,OAAO,CAAC;IAEnB,0EAA0E;IAC1E,SAAS,EAAE,MAAM,CAAC;IAElB;;;;OAIG;IACH,MAAM,EAAE,OAAO,CAAC,MAAM,CAAC,CAAC,OAAO,kBAAkB,CAAC,CAAC,MAAM,CAAC,EAAE,MAAM,CAAC,CAAC,CAAC;CACtE;AAUD;;;;;;;;;;;;GAYG;AACH,QAAA,MAAM,eAAe,GACnB,OAAO,SAAS,MAAM,EAAE,KACvB,gBAAgB,GAAG,SA0CrB,CAAC;AAEF;;;;GAIG;AACH,QAAA,MAAM,YAAY,GAAI,OAAO,SAAS,MAAM,EAAE,KAAG,OAQhD,CAAC;AAEF,OAAO,EACL,kBAAkB,EAClB,oBAAoB,EACpB,qBAAqB,EACrB,kBAAkB,EAClB,eAAe,EACf,gBAAgB,EAChB,YAAY,EACZ,eAAe,GAChB,CAAC"}

package/lib/typescript/commonjs/src/modules/bt-management/services/devices/bc01/bc01.device.d.ts

@@ -1,33 +1,53 @@
+import { Device } from "react-native-ble-plx";
+import { CreateDeviceParams } from "../../../types/create-device-params";
+import { DependentResultHandlerParams } from "../../../types/dependent-result-handler-params";
 import { MeasurementTypeForDevices } from "../../../types/device-measurement-map";
 import { IntegratedDevices } from "../../../types/integrated-devices";
-import { MeasurementWithCaseType } from "../../../types/measurement-with-case-type";
 import { IService } from "../../../types/service.type";
 import { BTManagedDevice } from "../bt-managed-device";
 /**
  * Contec BC401 (BC01) urine analyzer driver.
  *
- * The BC401 is a single-shot device: the patient dips a URS-7 strip, presses
- * the button, and the device pushes exactly one result frame on 0xFF01. There
- * is no streaming state, no per-tick updates, and no measurement session to
- * open — the device auto-starts on button press.
+ * The BC401 is a memory device, not a live stream: every measurement the
+ * patient takes is written to onboard 500-slot flash the moment the strip
+ * finishes reacting, and the app pulls stored records over BLE only after the
+ * host walks the reset → version → set-time → count → get-records handshake
+ * documented in `bc01-command-sequencer.ts`. Every record arrives as one
+ * 16-byte E1/E2 frame on 0xFF02.
  */
 export declare class BC01Device extends BTManagedDevice<IntegratedDevices.BC01> {
     protected onStreamStart: () => void;
     protected mainServices: IService[];
     /**
      * 90 s covers the maximum firmware-side reagent-pad settle time on a URS-7
-     * strip. If the device does not push a result frame within that window the
-     * data-processor times out and the driver surfaces "device unreachable".
+     * strip and leaves headroom for a bulk memory dump of every stored record.
+     * If the device does not push a frame within that window the data processor
+     * times out and the driver surfaces "device unreachable".
      */
     protected stuckDataTimeout: number;
+    constructor(device: Device, params: CreateDeviceParams<IntegratedDevices.BC01>);
+    /**
+     * Returns true once the notification buffer holds a complete BC401 frame,
+     * classified by its opening opcode. Anything else — a heartbeat opcode we
+     * do not recognise, or a partial buffer — is held back until enough bytes
+     * arrive to make sense of it. There is no aa55 header on this hardware.
+     */
     protected validatePackage: (pkg: string[]) => boolean;
-    protected handleSuccessResult(successResult: MeasurementWithCaseType<MeasurementTypeForDevices<[IntegratedDevices.BC01]>>): void | boolean;
-    private handleUrinalysisResult;
     /**
-     * A well-formed frame with all analyte fields still undefined means the
-     * device produced an empty read — typically a strip inserted upside down or
-     * removed before the reagent-pad timer completed.
+     * The parsing model declares every E1/E2 frame as `DEPENDENT`, so this hook
+     * runs for each record. We decode the raw bytes here — the packed 3-bits-per
+     * -pad layout is not expressible in the declaration parser — and report the
+     * reading directly through `onResult`. The frame is then handed back as
+     * `OTHER` so the state machine does not report it a second time and does
+     * not dedupe consecutive records that happen to share the same opcode.
+     */
+    protected handleDependentResult: (data: DependentResultHandlerParams<MeasurementTypeForDevices<[IntegratedDevices.BC01]>>) => DependentResultHandlerParams<MeasurementTypeForDevices<[IntegratedDevices.BC01]>>;
+    /**
+     * Nothing to do here for the BC401. Every reading arrives through the
+     * dependent-result path, and the state machine sees only the `OTHER`-typed
+     * echo we return from `handleDependentResult`.
      */
-    private checkIfHasError;
+    protected handleSuccessResult(): void | boolean;
+    private reportUrsRecord;
 }
 //# sourceMappingURL=bc01.device.d.ts.map

package/lib/typescript/commonjs/src/modules/bt-management/services/devices/bc01/bc01.device.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"bc01.device.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/bc01/bc01.device.ts"],"names":[],"mappings":"AAGA,OAAO,EAAE,yBAAyB,EAAE,MAAM,uCAAuC,CAAC;AAClF,OAAO,EAAE,iBAAiB,EAAE,MAAM,mCAAmC,CAAC;AACtE,OAAO,EAAE,uBAAuB,EAAE,MAAM,2CAA2C,CAAC;AACpF,OAAO,EAAE,QAAQ,EAAE,MAAM,6BAA6B,CAAC;AACvD,OAAO,EAAE,eAAe,EAAE,MAAM,sBAAsB,CAAC;AAIvD;;;;;;;GAOG;AACH,qBAAa,UAAW,SAAQ,eAAe,CAAC,iBAAiB,CAAC,IAAI,CAAC;IACrE,SAAS,CAAC,aAAa,EAAE,MAAM,IAAI,CAAY;IAE/C,SAAS,CAAC,YAAY,EAAE,QAAQ,EAAE,CAAoB;IAEtD;;;;OAIG;IACH,SAAS,CAAC,gBAAgB,SAAU;IAEpC,SAAS,CAAC,eAAe,EAAE,CAAC,GAAG,EAAE,MAAM,EAAE,KAAK,OAAO,CAgCnD;IAEF,SAAS,CAAC,mBAAmB,CAC3B,aAAa,EAAE,uBAAuB,CACpC,yBAAyB,CAAC,CAAC,iBAAiB,CAAC,IAAI,CAAC,CAAC,CACpD,GACA,IAAI,GAAG,OAAO;IAkBjB,OAAO,CAAC,sBAAsB;IAc9B;;;;OAIG;IACH,OAAO,CAAC,eAAe;CA2BxB"}
+{"version":3,"file":"bc01.device.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/bc01/bc01.device.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,MAAM,EAAE,MAAM,sBAAsB,CAAC;AAI9C,OAAO,EAAE,kBAAkB,EAAE,MAAM,qCAAqC,CAAC;AACzE,OAAO,EAAE,4BAA4B,EAAE,MAAM,gDAAgD,CAAC;AAC9F,OAAO,EAAE,yBAAyB,EAAE,MAAM,uCAAuC,CAAC;AAClF,OAAO,EAAE,iBAAiB,EAAE,MAAM,mCAAmC,CAAC;AAEtE,OAAO,EAAE,QAAQ,EAAE,MAAM,6BAA6B,CAAC;AAEvD,OAAO,EAAE,eAAe,EAAE,MAAM,sBAAsB,CAAC;AAmBvD;;;;;;;;;GASG;AACH,qBAAa,UAAW,SAAQ,eAAe,CAAC,iBAAiB,CAAC,IAAI,CAAC;IACrE,SAAS,CAAC,aAAa,EAAE,MAAM,IAAI,CAAY;IAE/C,SAAS,CAAC,YAAY,EAAE,QAAQ,EAAE,CAAoB;IAEtD;;;;;OAKG;IACH,SAAS,CAAC,gBAAgB,SAAU;gBAExB,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,kBAAkB,CAAC,iBAAiB,CAAC,IAAI,CAAC;IAqB9E;;;;;OAKG;IACH,SAAS,CAAC,eAAe,EAAE,CAAC,GAAG,EAAE,MAAM,EAAE,KAAK,OAAO,CAanD;IAEF;;;;;;;OAOG;IACH,SAAS,CAAC,qBAAqB,GAC7B,MAAM,4BAA4B,CAChC,yBAAyB,CAAC,CAAC,iBAAiB,CAAC,IAAI,CAAC,CAAC,CACpD,KACA,4BAA4B,CAC7B,yBAAyB,CAAC,CAAC,iBAAiB,CAAC,IAAI,CAAC,CAAC,CACpD,CASC;IAEF;;;;OAIG;IACH,SAAS,CAAC,mBAAmB,IAAI,IAAI,GAAG,OAAO;IAI/C,OAAO,CAAC,eAAe;CAqCxB"}

package/lib/typescript/commonjs/src/modules/bt-management/services/devices/bc01/bc01.main-services.d.ts

@@ -2,26 +2,20 @@ import { IService } from "../../../types/service.type";
 /**
  * Contec BC401 (a.k.a. BC01) urine analyzer — GATT profile.
  *
- * The BC401 uses Contec's proprietary FF12 service, shared across their consumer
- * medical devices. A single result notification carries a 7-parameter URS-7
- * strip readout expanded into eleven analyte values on the wire.
+ * The BC401 uses Contec's proprietary FF12 service, shared across their
+ * consumer medical devices. Every stored URS-7 measurement is pushed as a
+ * 16-byte record on 0xFF02 after the host has walked the handshake documented
+ * in `bc01-command-sequencer.ts`.
  *
  *   Service          0xFF12
- *   Notify (result)  0xFF01  — CCCD 0x2902 must be written 01 00 to enable
- *   Write (command)  0xFF02  — RESET / SET_UNIT / REQUEST_HISTORY
+ *   Notify (result)  0xFF02  — CCCD 0x2902 must be written 01 00 to enable
+ *   Write (command)  0xFF01  — RESET / SET_TIME / GET_COUNT / GET_RECORDS
  *
- * Wire layout of a result frame (Contec URS-7 firmware ≥ 1.2.x):
- *   [0..1]   header      "aa 55"      — Contec sentinel
- *   [2]      length      byte after header
- *   [3]      command     "a1" == RESULT_URS7
- *   [4]      strip type  "07" == 7-panel
- *   [5..15]  values      one byte per analyte, encoding the discrete
- *                        level index into diagnosticResults[key]
- *   [16]     checksum    xor over [2..15]
- *
- * Byte positions calibrated against PHMS 3.0.03 Android app; older firmware
- * (< 1.2.x) uses a different command byte and is not supported by this driver
- * (the validator will reject those frames).
+ * On the wire a stored URS record opens with 0xE1 (single) or 0xE2 (paginated).
+ * The remaining fifteen bytes carry the flags nibble, timestamp, seven bytes of
+ * packed 3-bit analyte indices, and a checksum. `bc01-frame-parser.ts` decodes
+ * them; this file just declares the GATT surface and hands every E1/E2 frame
+ * to the driver's dependent-result path so the parser can run.
  */
 export declare const bc01MainServices: IService[];
 //# sourceMappingURL=bc01.main-services.d.ts.map

package/lib/typescript/commonjs/src/modules/bt-management/services/devices/bc01/bc01.main-services.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"bc01.main-services.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/bc01/bc01.main-services.ts"],"names":[],"mappings":"AAGA,OAAO,EAAE,QAAQ,EAAE,MAAM,6BAA6B,CAAC;AAEvD;;;;;;;;;;;;;;;;;;;;;;;GAuBG;AACH,eAAO,MAAM,gBAAgB,EAAE,QAAQ,EAuFtC,CAAC"}
+{"version":3,"file":"bc01.main-services.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/bc01/bc01.main-services.ts"],"names":[],"mappings":"AAGA,OAAO,EAAE,QAAQ,EAAE,MAAM,6BAA6B,CAAC;AAEvD;;;;;;;;;;;;;;;;;GAiBG;AACH,eAAO,MAAM,gBAAgB,EAAE,QAAQ,EAgDtC,CAAC"}

package/lib/typescript/module/src/modules/bt-management/services/bt-manager.d.ts

@@ -13,7 +13,6 @@ export declare class BTManager<T extends readonly AcceptedDevice[]> {
     private stateChangeListener;
     private eventSubscriptions;
     private deviceCreator;
-    private lastScanTimestamp;
     constructor(bleManager: BleManager, acceptedDevices: T);
     destroy: () => void;
     startScan: () => void;

package/lib/typescript/module/src/modules/bt-management/services/bt-manager.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"bt-manager.d.ts","sourceRoot":"","sources":["../../../../../../../src/modules/bt-management/services/bt-manager.ts"],"names":[],"mappings":"AAEA,OAAO,EAEL,UAAU,EAKX,MAAM,sBAAsB,CAAC;AAI9B,OAAO,EAAE,cAAc,EAAE,MAAM,0BAA0B,CAAC;AAC1D,OAAO,EAAE,WAAW,EAAE,MAAM,wBAAwB,CAAC;AACrD,OAAO,EAAE,0BAA0B,EAAE,MAAM,wCAAwC,CAAC;AACpF,OAAO,EAAE,aAAa,EAAE,MAAM,yBAAyB,CAAC;AACxD,OAAO,EAAE,cAAc,EAAE,MAAM,0BAA0B,CAAC;AAG1D,OAAO,EAAE,eAAe,EAAE,MAAM,6BAA6B,CAAC;AAE9D,qBAAa,SAAS,CAAC,CAAC,SAAS,SAAS,cAAc,EAAE;IAWtD,OAAO,CAAC,QAAQ,CAAC,UAAU;IAC3B,OAAO,CAAC,QAAQ,CAAC,eAAe;IAXlC,OAAO,CAAC,MAAM,CAAC,QAAQ,CAAC,WAAW,CAAM;IACzC,OAAO,CAAC,OAAO,CAAsD;IAErE,OAAO,CAAC,mBAAmB,CAA2B;IACtD,OAAO,CAAC,kBAAkB,CAAsB;IAEhD,OAAO,CAAC,aAAa,CAAmB;IACxC,OAAO,CAAC,iBAAiB,CAAa;gBAGnB,UAAU,EAAE,UAAU,EACtB,eAAe,EAAE,CAAC;IAK9B,OAAO,aAyBZ;IAEK,SAAS,aA0Dd;IAEK,QAAQ,aAmBb;IAEK,aAAa,GAClB,WAAW,CACT,MAAM,EAAE,eAAe,CAAC,WAAW,CAAC,CAAC,CAAC,CAAC,EACvC,OAAO,EAAE,SAAS,CAAC,CAAC,CAAC,KAClB,OAAO,CAAC,IAAI,CAAC,UAIlB;IAEK,OAAO,GAAI,WAAW,CAAC,IAAI,EAAE,aAAa,KAAK,IAAI,UAGxD;IAEK,qBAAqB,GAC1B,WAAW,CAAC,IAAI,EAAE,0BAA0B,KAAK,IAAI,UAIrD;IAEK,QAAQ,GACb,WAAW,CAAC,IAAI,EAAE,cAAc,CAAC,WAAW,CAAC,CAAC,CAAC,CAAC,KAAK,IAAI,UAIzD;IAGF,OAAO,CAAC,gBAAgB,CAAC,CAAiD;IAC1E,OAAO,CAAC,eAAe,CAAC,CAAgC;IACxD,OAAO,CAAC,qBAAqB,CAAC,CAGX;IACnB,OAAO,CAAC,6BAA6B,CAAC,CAE5B;IAEV,OAAO,CAAC,YAAY,CAsElB;IAEF,OAAO,CAAC,8BAA8B,CAUpC;CACH"}
+{"version":3,"file":"bt-manager.d.ts","sourceRoot":"","sources":["../../../../../../../src/modules/bt-management/services/bt-manager.ts"],"names":[],"mappings":"AAEA,OAAO,EAEL,UAAU,EAKX,MAAM,sBAAsB,CAAC;AAI9B,OAAO,EAAE,cAAc,EAAE,MAAM,0BAA0B,CAAC;AAC1D,OAAO,EAAE,WAAW,EAAE,MAAM,wBAAwB,CAAC;AACrD,OAAO,EAAE,0BAA0B,EAAE,MAAM,wCAAwC,CAAC;AACpF,OAAO,EAAE,aAAa,EAAE,MAAM,yBAAyB,CAAC;AACxD,OAAO,EAAE,cAAc,EAAE,MAAM,0BAA0B,CAAC;AAG1D,OAAO,EAAE,eAAe,EAAE,MAAM,6BAA6B,CAAC;AAE9D,qBAAa,SAAS,CAAC,CAAC,SAAS,SAAS,cAAc,EAAE;IAUtD,OAAO,CAAC,QAAQ,CAAC,UAAU;IAC3B,OAAO,CAAC,QAAQ,CAAC,eAAe;IAVlC,OAAO,CAAC,MAAM,CAAC,QAAQ,CAAC,WAAW,CAAM;IACzC,OAAO,CAAC,OAAO,CAAsD;IAErE,OAAO,CAAC,mBAAmB,CAA2B;IACtD,OAAO,CAAC,kBAAkB,CAAsB;IAEhD,OAAO,CAAC,aAAa,CAAmB;gBAGrB,UAAU,EAAE,UAAU,EACtB,eAAe,EAAE,CAAC;IAK9B,OAAO,aAuBZ;IAEK,SAAS,aAuDd;IAEK,QAAQ,aAmBb;IAEK,aAAa,GAClB,WAAW,CACT,MAAM,EAAE,eAAe,CAAC,WAAW,CAAC,CAAC,CAAC,CAAC,EACvC,OAAO,EAAE,SAAS,CAAC,CAAC,CAAC,KAClB,OAAO,CAAC,IAAI,CAAC,UAIlB;IAEK,OAAO,GAAI,WAAW,CAAC,IAAI,EAAE,aAAa,KAAK,IAAI,UAGxD;IAEK,qBAAqB,GAC1B,WAAW,CAAC,IAAI,EAAE,0BAA0B,KAAK,IAAI,UAIrD;IAEK,QAAQ,GACb,WAAW,CAAC,IAAI,EAAE,cAAc,CAAC,WAAW,CAAC,CAAC,CAAC,CAAC,KAAK,IAAI,UAIzD;IAGF,OAAO,CAAC,gBAAgB,CAAC,CAAiD;IAC1E,OAAO,CAAC,eAAe,CAAC,CAAgC;IACxD,OAAO,CAAC,qBAAqB,CAAC,CAGX;IACnB,OAAO,CAAC,6BAA6B,CAAC,CAE5B;IAEV,OAAO,CAAC,YAAY,CA+ElB;IAEF,OAAO,CAAC,8BAA8B,CAUpC;CACH"}

package/lib/typescript/module/src/modules/bt-management/services/device-creator.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"device-creator.d.ts","sourceRoot":"","sources":["../../../../../../../src/modules/bt-management/services/device-creator.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,cAAc,EAAE,MAAM,0BAA0B,CAAC;AAC1D,OAAO,EAAE,kBAAkB,EAAE,MAAM,+BAA+B,CAAC;AAEnE,OAAO,EAAE,SAAS,EAAE,MAAM,qBAAqB,CAAC;AAChD,OAAO,EAAE,WAAW,EAAE,MAAM,wBAAwB,CAAC;AAMrD,OAAO,EAAE,eAAe,EAAE,MAAM,6BAA6B,CAAC;AA6D9D,qBAAa,aAAa,CAAC,CAAC,SAAS,SAAS,cAAc,EAAE;IAKhD,OAAO,CAAC,QAAQ,CAAC,mBAAmB;IAJhD,OAAO,CAAC,eAAe,CAAuC;IAC9D,OAAO,CAAC,QAAQ,CAAC,cAAc,CAAO;IACtC,OAAO,CAAC,QAAQ,CAAC,aAAa,CAAsC;gBAEvC,mBAAmB,EAAE,CAAC;IAI5C,aAAa,GAAI,WAAW,MAAM,KAAG,WAAW,CAAC,CAAC,CAAC,GAAG,SAAS,CAkBpE;IAEK,YAAY,CAAC,CAAC,SAAS,SAAS,EACrC,MAAM,EAAE,kBAAkB,CAAC,CAAC,CAAC,GAC5B,eAAe,CAAC,CAAC,CAAC;IAmCd,OAAO,aAEZ;IAEF;;;OAGG;IACH,OAAO,CAAC,eAAe,CAmBrB;IAEF,OAAO,CAAC,eAAe;CAexB"}
+{"version":3,"file":"device-creator.d.ts","sourceRoot":"","sources":["../../../../../../../src/modules/bt-management/services/device-creator.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,cAAc,EAAE,MAAM,0BAA0B,CAAC;AAC1D,OAAO,EAAE,kBAAkB,EAAE,MAAM,+BAA+B,CAAC;AAEnE,OAAO,EAAE,SAAS,EAAE,MAAM,qBAAqB,CAAC;AAChD,OAAO,EAAE,WAAW,EAAE,MAAM,wBAAwB,CAAC;AAMrD,OAAO,EAAE,eAAe,EAAE,MAAM,6BAA6B,CAAC;AA6D9D,qBAAa,aAAa,CAAC,CAAC,SAAS,SAAS,cAAc,EAAE;IAKhD,OAAO,CAAC,QAAQ,CAAC,mBAAmB;IAJhD,OAAO,CAAC,eAAe,CAAuC;IAC9D,OAAO,CAAC,QAAQ,CAAC,cAAc,CAAO;IACtC,OAAO,CAAC,QAAQ,CAAC,aAAa,CAAsC;gBAEvC,mBAAmB,EAAE,CAAC;IAI5C,aAAa,GAAI,WAAW,MAAM,KAAG,WAAW,CAAC,CAAC,CAAC,GAAG,SAAS,CAkBpE;IAEK,YAAY,CAAC,CAAC,SAAS,SAAS,EACrC,MAAM,EAAE,kBAAkB,CAAC,CAAC,CAAC,GAC5B,eAAe,CAAC,CAAC,CAAC;IAwCd,OAAO,aAEZ;IAEF;;;OAGG;IACH,OAAO,CAAC,eAAe,CAmBrB;IAEF,OAAO,CAAC,eAAe;CAexB"}

package/lib/typescript/module/src/modules/bt-management/services/devices/bc01/bc01-command-sequencer.d.ts

@@ -0,0 +1,53 @@
+import { CommandSequencer } from "../../../types/command-sequencer";
+import { DeviceCommand } from "../../../types/device-command";
+interface Bc01SequencerParams {
+    /** The write channel every command goes out on. FF01 for a real BC401. */
+    write: Omit<DeviceCommand, "frame">;
+    /**
+     * Called with why the exchange stopped. Optional; a refusal here does not
+     * end the connection because the device continues to accept fresh commands
+     * even after a bad handshake step. The parent driver decides what to do.
+     */
+    onRefused?: (reason: string) => void;
+}
+/**
+ * Walks the BC401 through its post-reset handshake and pulls every stored
+ * record.
+ *
+ * The device is self-clocking: it answers each command with a single frame,
+ * and the first byte of that frame names what it is. So the sequencer keeps
+ * no counter of its own — it looks at the reply, decides what belongs next,
+ * and returns that. A frame whose opcode is not part of the handshake is left
+ * unanswered so the driver's stuck-data watchdog surfaces the stall rather
+ * than the sequencer sending a command the device did not ask for.
+ *
+ * `initialCommands()` returns only the reset. The rest of the handshake -
+ * VERSION, SET_TIME, GET_COUNT, GET_RECORDS - is driven entirely by the
+ * device's own replies, because sending them any earlier would race the
+ * firmware boot the reset triggers.
+ */
+export declare class Bc01CommandSequencer implements CommandSequencer {
+    private readonly params;
+    private isDone;
+    /** Injectable for tests; production reads `Date.now()`. */
+    private readonly clock;
+    constructor(params: Bc01SequencerParams, clock?: () => Date);
+    initialCommands: () => readonly DeviceCommand[];
+    nextCommand: (frame: readonly string[]) => readonly DeviceCommand[] | undefined;
+    /**
+     * The device pages every record it holds, one 16-byte frame at a time. Only
+     * the frame whose flags byte carries `0x40` needs an acknowledgement; every
+     * other page is a status update we let ride while the transfer continues.
+     */
+    private answerStoredRecord;
+    private commandFor;
+}
+export declare const bc01CommandSequencerInternals: {
+    bc401Checksum: (bytes: readonly number[]) => number;
+    buildCommand: (opcode: number, arg: number) => number[];
+    buildResetCommand: () => number[];
+    buildRequestVersionCommand: () => number[];
+    buildSetTimeCommand: (now: Date) => number[];
+};
+export {};
+//# sourceMappingURL=bc01-command-sequencer.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/devices/bc01/bc01-command-sequencer.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"bc01-command-sequencer.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/bc01/bc01-command-sequencer.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,gBAAgB,EAAE,MAAM,kCAAkC,CAAC;AACpE,OAAO,EAAE,aAAa,EAAE,MAAM,+BAA+B,CAAC;AAuC9D,UAAU,mBAAmB;IAE3B,0EAA0E;IAC1E,KAAK,EAAE,IAAI,CAAC,aAAa,EAAE,OAAO,CAAC,CAAC;IAEpC;;;;OAIG;IACH,SAAS,CAAC,EAAE,CAAC,MAAM,EAAE,MAAM,KAAK,IAAI,CAAC;CACtC;AAqED;;;;;;;;;;;;;;;GAeG;AAEH,qBAAa,oBAAqB,YAAW,gBAAgB;IAOzD,OAAO,CAAC,QAAQ,CAAC,MAAM;IANzB,OAAO,CAAC,MAAM,CAAS;IAEvB,2DAA2D;IAC3D,OAAO,CAAC,QAAQ,CAAC,KAAK,CAAa;gBAGhB,MAAM,EAAE,mBAAmB,EAC5C,KAAK,GAAE,MAAM,IAAuB;IAK/B,eAAe,QAAO,SAAS,aAAa,EAAE,CAEnD;IAEK,WAAW,GAChB,OAAO,SAAS,MAAM,EAAE,KACvB,SAAS,aAAa,EAAE,GAAG,SAAS,CAoCrC;IAEF;;;;OAIG;IACH,OAAO,CAAC,kBAAkB,CAUxB;IAEF,OAAO,CAAC,UAAU,CAIf;CACJ;AAGD,eAAO,MAAM,6BAA6B;2BA3JZ,SAAS,MAAM,EAAE,KAAG,MAAM;2BAQ1B,MAAM,OAAO,MAAM,KAAG,MAAM,EAAE;6BAW9B,MAAM,EAAE;sCAQC,MAAM,EAAE;+BAYb,IAAI,KAAG,MAAM,EAAE;CA0HhD,CAAC"}

package/lib/typescript/module/src/modules/bt-management/services/devices/bc01/bc01-frame-parser.d.ts

@@ -0,0 +1,53 @@
+/** BC401 stored-record frame is always sixteen bytes: header, timestamp, analytes, checksum. */
+declare const BC01_RECORD_LENGTH = 16;
+/** The two opcodes the firmware uses for a stored URS-7 record. */
+declare const BC01_URS_OPCODE = 225;
+declare const BC01_PAGED_URS_OPCODE = 226;
+/**
+ * The bit `0x40` of the flags byte marks the last record of a paginated set.
+ * The sequencer keys off it to send the `[0x92, 0x7E, chk]` acknowledgement.
+ */
+declare const BC01_LAST_OF_SET_BIT = 64;
+/**
+ * URS-7 pad names, in the exact order they occupy the packed 3-bit slots
+ * across bytes 8..14 (see M1/a.java). The eleventh slot is a Contec-firmware
+ * field the vendor's own catalog calls "vc" and no other name is documented.
+ */
+declare const BC01_ANALYTE_ORDER: readonly ["uro", "bld", "bil", "ket", "glu", "pro", "ph", "nit", "leu", "sg", "vc"];
+/** The result of decoding one 16-byte record. `lastOfSet` is what the sequencer keys on. */
+interface Bc01ParsedRecord {
+    /** Local wall-clock time the device recorded, with millisecond precision unavailable. */
+    timestamp: Date;
+    /** True when the flags byte set bit 0x40 — this is the frame that must be acknowledged. */
+    lastOfSet: boolean;
+    /** Low nibble of the flags byte; the page counter the firmware writes. */
+    pageIndex: number;
+    /**
+     * Analyte level indices, absent for any pad the strip did not measure.
+     * A pad the strip did measure carries a value in [0, 6]; the vendor's own
+     * lookup tables translate that to a categorical result per analyte.
+     */
+    values: Partial<Record<(typeof BC01_ANALYTE_ORDER)[number], number>>;
+}
+/**
+ * Decodes a 16-byte E1 or E2 frame into its timestamp and analyte indices.
+ *
+ * Returns `undefined` for any frame that is not the right length or does not
+ * open with an E1/E2 opcode — the caller is not asked to guess whether a
+ * frame is a record or a heartbeat, and a frame that fails these checks is
+ * skipped rather than parsed into a plausible-looking wrong reading.
+ *
+ * The checksum byte is not verified here: the SDK's read path already ensures
+ * frame integrity before the parser sees the bytes, and a URS-7 pad value can
+ * only land in [0, 7] anyway — a corrupt payload would fail the pad-value
+ * check before it made it into a measurement.
+ */
+declare const parseBc01Record: (frame: readonly string[]) => Bc01ParsedRecord | undefined;
+/**
+ * True when the buffer holds a complete BC401 stored record. Used by the
+ * driver's `validatePackage` hook so the SDK's read path only advances once
+ * the notification carries a whole 16-byte frame.
+ */
+declare const isBc01Record: (frame: readonly string[]) => boolean;
+export { BC01_ANALYTE_ORDER, BC01_LAST_OF_SET_BIT, BC01_PAGED_URS_OPCODE, BC01_RECORD_LENGTH, BC01_URS_OPCODE, Bc01ParsedRecord, isBc01Record, parseBc01Record, };
+//# sourceMappingURL=bc01-frame-parser.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/devices/bc01/bc01-frame-parser.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"bc01-frame-parser.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/bc01/bc01-frame-parser.ts"],"names":[],"mappings":"AAIA,gGAAgG;AAChG,QAAA,MAAM,kBAAkB,KAAK,CAAC;AAE9B,mEAAmE;AACnE,QAAA,MAAM,eAAe,MAAO,CAAC;AAC7B,QAAA,MAAM,qBAAqB,MAAO,CAAC;AAEnC;;;GAGG;AACH,QAAA,MAAM,oBAAoB,KAAO,CAAC;AAelC;;;;GAIG;AACH,QAAA,MAAM,kBAAkB,qFAYuC,CAAC;AAKhE,4FAA4F;AAC5F,UAAU,gBAAgB;IAExB,yFAAyF;IACzF,SAAS,EAAE,IAAI,CAAC;IAEhB,2FAA2F;IAC3F,SAAS,EAAE,OAAO,CAAC;IAEnB,0EAA0E;IAC1E,SAAS,EAAE,MAAM,CAAC;IAElB;;;;OAIG;IACH,MAAM,EAAE,OAAO,CAAC,MAAM,CAAC,CAAC,OAAO,kBAAkB,CAAC,CAAC,MAAM,CAAC,EAAE,MAAM,CAAC,CAAC,CAAC;CACtE;AAUD;;;;;;;;;;;;GAYG;AACH,QAAA,MAAM,eAAe,GACnB,OAAO,SAAS,MAAM,EAAE,KACvB,gBAAgB,GAAG,SA0CrB,CAAC;AAEF;;;;GAIG;AACH,QAAA,MAAM,YAAY,GAAI,OAAO,SAAS,MAAM,EAAE,KAAG,OAQhD,CAAC;AAEF,OAAO,EACL,kBAAkB,EAClB,oBAAoB,EACpB,qBAAqB,EACrB,kBAAkB,EAClB,eAAe,EACf,gBAAgB,EAChB,YAAY,EACZ,eAAe,GAChB,CAAC"}