@ovok/native 0.4.6 → 0.4.8

package/lib/typescript/module/src/modules/bt-management/index.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../../../../../src/modules/bt-management/index.ts"],"names":[],"mappings":"AAAA,cAAc,6BAA6B,CAAC;AAC5C,cAAc,yBAAyB,CAAC;AACxC,cAAc,+BAA+B,CAAC;AAC9C,cAAc,2BAA2B,CAAC;AAC1C,cAAc,0BAA0B,CAAC;AACzC,cAAc,0BAA0B,CAAC;AACzC,cAAc,kCAAkC,CAAC;AACjD,cAAc,0BAA0B,CAAC;AACzC,cAAc,4BAA4B,CAAC;AAC3C,cAAc,+BAA+B,CAAC;AAC9C,cAAc,2BAA2B,CAAC;AAC1C,cAAc,2BAA2B,CAAC;AAC1C,cAAc,4BAA4B,CAAC;AAC3C,cAAc,6BAA6B,CAAC;AAC5C,cAAc,6BAA6B,CAAC;AAC5C,cAAc,oBAAoB,CAAC;AACnC,cAAc,uBAAuB,CAAC;AACtC,cAAc,qBAAqB,CAAC;AACpC,cAAc,uBAAuB,CAAC;AACtC,cAAc,4BAA4B,CAAC;AAC3C,cAAc,0BAA0B,CAAC;AACzC,cAAc,sBAAsB,CAAC;AACrC,cAAc,uBAAuB,CAAC;AACtC,cAAc,0BAA0B,CAAC;AACzC,cAAc,mCAAmC,CAAC;AAClD,cAAc,yBAAyB,CAAC;AACxC,cAAc,wBAAwB,CAAC;AACvC,cAAc,uCAAuC,CAAC;AAEtD,cAAc,sCAAsC,CAAC;AACrD,cAAc,yCAAyC,CAAC;AACxD,cAAc,uBAAuB,CAAC;AACtC,cAAc,wCAAwC,CAAC;AAEvD,cAAc,uCAAuC,CAAC;AAEtD,cAAc,0BAA0B,CAAC;AACzC,cAAc,0CAA0C,CAAC;AACzD,cAAc,iCAAiC,CAAC"}
+{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../../../../../src/modules/bt-management/index.ts"],"names":[],"mappings":"AAAA,cAAc,6BAA6B,CAAC;AAC5C,cAAc,yBAAyB,CAAC;AACxC,cAAc,+BAA+B,CAAC;AAC9C,cAAc,2BAA2B,CAAC;AAC1C,cAAc,0BAA0B,CAAC;AACzC,cAAc,0BAA0B,CAAC;AACzC,cAAc,kCAAkC,CAAC;AACjD,cAAc,0BAA0B,CAAC;AACzC,cAAc,4BAA4B,CAAC;AAC3C,cAAc,+BAA+B,CAAC;AAC9C,cAAc,2BAA2B,CAAC;AAC1C,cAAc,2BAA2B,CAAC;AAC1C,cAAc,0BAA0B,CAAC;AACzC,cAAc,4BAA4B,CAAC;AAC3C,cAAc,6BAA6B,CAAC;AAC5C,cAAc,6BAA6B,CAAC;AAC5C,cAAc,2BAA2B,CAAC;AAC1C,cAAc,wBAAwB,CAAC;AACvC,cAAc,oBAAoB,CAAC;AACnC,cAAc,uBAAuB,CAAC;AACtC,cAAc,qBAAqB,CAAC;AACpC,cAAc,uBAAuB,CAAC;AACtC,cAAc,4BAA4B,CAAC;AAC3C,cAAc,0BAA0B,CAAC;AACzC,cAAc,sBAAsB,CAAC;AACrC,cAAc,uBAAuB,CAAC;AACtC,cAAc,0BAA0B,CAAC;AACzC,cAAc,mCAAmC,CAAC;AAClD,cAAc,yBAAyB,CAAC;AACxC,cAAc,wBAAwB,CAAC;AACvC,cAAc,uCAAuC,CAAC;AAEtD,cAAc,sCAAsC,CAAC;AACrD,cAAc,yCAAyC,CAAC;AACxD,cAAc,uBAAuB,CAAC;AACtC,cAAc,wCAAwC,CAAC;AACvD,cAAc,wDAAwD,CAAC;AACvE,cAAc,gDAAgD,CAAC;AAC/D,cAAc,uDAAuD,CAAC;AACtE,cAAc,+CAA+C,CAAC;AAC9D,cAAc,gDAAgD,CAAC;AAC/D,cAAc,yCAAyC,CAAC;AACxD,cAAc,yCAAyC,CAAC;AACxD,cAAc,8CAA8C,CAAC;AAC7D,cAAc,4CAA4C,CAAC;AAC3D,cAAc,gDAAgD,CAAC;AAC/D,cAAc,wCAAwC,CAAC;AACvD,cAAc,2CAA2C,CAAC;AAC1D,cAAc,yCAAyC,CAAC;AACxD,cAAc,uCAAuC,CAAC;AACtD,cAAc,0CAA0C,CAAC;AACzD,cAAc,4CAA4C,CAAC;AAC3D,cAAc,4CAA4C,CAAC;AAE3D,cAAc,uCAAuC,CAAC;AAEtD,cAAc,0BAA0B,CAAC;AACzC,cAAc,0CAA0C,CAAC;AACzD,cAAc,iCAAiC,CAAC"}

package/lib/typescript/module/src/modules/bt-management/services/custom/compile-case-fields.d.ts

@@ -0,0 +1,13 @@
+import { MeasurementTypeKey } from "@ovok/core";
+import { CompiledCustomField } from "../../types/compiled-custom-field";
+import { CustomFieldSpec } from "../../types/custom-field-spec";
+import { ParserDefinition } from "../../types/parser-definition";
+/**
+ * A reading must carry every property that makes it that measurement. A blood pressure
+ * without a diastolic is not a partial blood pressure, it is a clinical record of something
+ * the device never reported, so the declaration is refused rather than the reading dropped.
+ */
+declare const assertRequiredFields: (id: string, path: string, declared: CustomFieldSpec[], measurementTypeKey: MeasurementTypeKey) => void;
+declare const compileFields: (id: string, path: string, declared: CustomFieldSpec[], measurementTypeKey: MeasurementTypeKey, minLengthBytes: number, fields: Map<string, CompiledCustomField>, names: Set<string>) => ParserDefinition[];
+export { assertRequiredFields, compileFields };
+//# sourceMappingURL=compile-case-fields.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/custom/compile-case-fields.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"compile-case-fields.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/custom/compile-case-fields.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,kBAAkB,EAAE,MAAM,YAAY,CAAC;AAGhD,OAAO,EAAE,mBAAmB,EAAE,MAAM,mCAAmC,CAAC;AACxE,OAAO,EAAE,eAAe,EAAE,MAAM,+BAA+B,CAAC;AAChE,OAAO,EAAE,gBAAgB,EAAE,MAAM,+BAA+B,CAAC;AA8BjE;;;;GAIG;AACH,QAAA,MAAM,oBAAoB,GACxB,IAAI,MAAM,EACV,MAAM,MAAM,EACZ,UAAU,eAAe,EAAE,EAC3B,oBAAoB,kBAAkB,KACrC,IAeF,CAAC;AAEF,QAAA,MAAM,aAAa,GACjB,IAAI,MAAM,EACV,MAAM,MAAM,EACZ,UAAU,eAAe,EAAE,EAC3B,oBAAoB,kBAAkB,EACtC,gBAAgB,MAAM,EACtB,QAAQ,GAAG,CAAC,MAAM,EAAE,mBAAmB,CAAC,EACxC,OAAO,GAAG,CAAC,MAAM,CAAC,KACjB,gBAAgB,EA4Bf,CAAC;AAEL,OAAO,EAAE,oBAAoB,EAAE,aAAa,EAAE,CAAC"}

package/lib/typescript/module/src/modules/bt-management/services/custom/compile-case-shape.d.ts

@@ -0,0 +1,19 @@
+import { CustomCaseSpec } from "../../types/custom-case-spec";
+/**
+ * How long a frame of this shape is, which may be longer than the shortest the
+ * characteristic emits but never shorter: the selector chose this shape, so its own fields
+ * are the ones that have to fit.
+ */
+declare const assertCaseLength: (id: string, path: string, caseSpec: CustomCaseSpec, frameMinLengthBytes: number) => number;
+/**
+ * A frame that is a run of records, and how wide one is.
+ *
+ * The characteristic has to guarantee at least one whole record, otherwise a declaration
+ * whose fields all fit could still never decode anything.
+ */
+declare const assertRepeatedRecords: (id: string, path: string, caseSpec: CustomCaseSpec, frameMinLengthBytes: number) => {
+    recordBytes: number;
+    from: number;
+} | undefined;
+export { assertCaseLength, assertRepeatedRecords };
+//# sourceMappingURL=compile-case-shape.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/custom/compile-case-shape.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"compile-case-shape.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/custom/compile-case-shape.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,cAAc,EAAE,MAAM,8BAA8B,CAAC;AAI9D;;;;GAIG;AACH,QAAA,MAAM,gBAAgB,GACpB,IAAI,MAAM,EACV,MAAM,MAAM,EACZ,UAAU,cAAc,EACxB,qBAAqB,MAAM,KAC1B,MAgBF,CAAC;AAEF;;;;;GAKG;AACH,QAAA,MAAM,qBAAqB,GACzB,IAAI,MAAM,EACV,MAAM,MAAM,EACZ,UAAU,cAAc,EACxB,qBAAqB,MAAM,KAC1B;IAAE,WAAW,EAAE,MAAM,CAAC;IAAC,IAAI,EAAE,MAAM,CAAA;CAAE,GAAG,SAkC1C,CAAC;AAEF,OAAO,EAAE,gBAAgB,EAAE,qBAAqB,EAAE,CAAC"}

package/lib/typescript/module/src/modules/bt-management/services/custom/compile-custom-case.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"compile-custom-case.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/custom/compile-custom-case.ts"],"names":[],"mappings":"AAIA,OAAO,EAAE,mBAAmB,EAAE,MAAM,mCAAmC,CAAC;AACxE,OAAO,EAAE,cAAc,EAAE,MAAM,8BAA8B,CAAC;AAG9D,OAAO,EAAE,WAAW,EAAE,MAAM,0BAA0B,CAAC;AAgJvD,2EAA2E;AAC3E,eAAO,MAAM,iBAAiB,GAC5B,IAAI,MAAM,EACV,MAAM,MAAM,EACZ,UAAU,cAAc,EACxB,gBAAgB,MAAM,EACtB,QAAQ,GAAG,CAAC,MAAM,EAAE,mBAAmB,CAAC,KACvC,WA4DF,CAAC"}
+{"version":3,"file":"compile-custom-case.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/custom/compile-custom-case.ts"],"names":[],"mappings":"AAIA,OAAO,EAAE,mBAAmB,EAAE,MAAM,mCAAmC,CAAC;AACxE,OAAO,EAAE,cAAc,EAAE,MAAM,8BAA8B,CAAC;AAI9D,OAAO,EAAE,WAAW,EAAE,MAAM,0BAA0B,CAAC;AAgGvD,2EAA2E;AAC3E,eAAO,MAAM,iBAAiB,GAC5B,IAAI,MAAM,EACV,MAAM,MAAM,EACZ,UAAU,cAAc,EACxB,gBAAgB,MAAM,EACtB,QAAQ,GAAG,CAAC,MAAM,EAAE,mBAAmB,CAAC,KACvC,WA+FF,CAAC"}

package/lib/typescript/module/src/modules/bt-management/services/custom/compile-custom-field.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"compile-custom-field.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/custom/compile-custom-field.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,kBAAkB,EAAE,MAAM,YAAY,CAAC;AAGhD,OAAO,EAAE,mBAAmB,EAAE,MAAM,mCAAmC,CAAC;AACxE,OAAO,EAAE,eAAe,EAAE,MAAM,+BAA+B,CAAC;AAsGhE,8FAA8F;AAC9F,eAAO,MAAM,kBAAkB,GAC7B,IAAI,MAAM,EACV,MAAM,MAAM,EACZ,OAAO,eAAe,EACtB,oBAAoB,kBAAkB,EACtC,gBAAgB,MAAM,KACrB,mBAyDF,CAAC"}
+{"version":3,"file":"compile-custom-field.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/custom/compile-custom-field.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,kBAAkB,EAAE,MAAM,YAAY,CAAC;AAGhD,OAAO,EAAE,mBAAmB,EAAE,MAAM,mCAAmC,CAAC;AACxE,OAAO,EAAE,eAAe,EAAE,MAAM,+BAA+B,CAAC;AA+GhE,8FAA8F;AAC9F,eAAO,MAAM,kBAAkB,GAC7B,IAAI,MAAM,EACV,MAAM,MAAM,EACZ,OAAO,eAAe,EACtB,oBAAoB,kBAAkB,EACtC,gBAAgB,MAAM,KACrB,mBAyDF,CAAC"}

package/lib/typescript/module/src/modules/bt-management/services/custom/compile-custom-frame.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"compile-custom-frame.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/custom/compile-custom-frame.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,eAAe,EAAE,MAAM,+BAA+B,CAAC;AAMhE;;;;;;;;;GASG;AACH,eAAO,MAAM,kBAAkB,GAC7B,IAAI,MAAM,EACV,MAAM,MAAM,EACZ,OAAO,eAAe,KACrB,eA6EF,CAAC"}
+{"version":3,"file":"compile-custom-frame.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/custom/compile-custom-frame.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,eAAe,EAAE,MAAM,+BAA+B,CAAC;AA+EhE;;;;;;;;;GASG;AACH,eAAO,MAAM,kBAAkB,GAC7B,IAAI,MAAM,EACV,MAAM,MAAM,EACZ,OAAO,eAAe,KACrB,eAmFF,CAAC"}

package/lib/typescript/module/src/modules/bt-management/services/custom/compile-custom-lepu.d.ts

@@ -0,0 +1,11 @@
+import { CustomDeviceSpec } from "../../types/custom-device-spec";
+import { CustomLepuSpec } from "../../types/custom-lepu-spec";
+/**
+ * Validates the Lepu declaration and normalises its UUIDs.
+ *
+ * The write service has to be one the declaration already monitors: a command written to a
+ * service the device never opened is accepted by nothing and answered by nothing, which
+ * looks exactly like hardware that is simply not responding.
+ */
+export declare const compileCustomLepu: (id: string, spec: CustomDeviceSpec, serviceUuids: readonly string[]) => CustomLepuSpec | undefined;
+//# sourceMappingURL=compile-custom-lepu.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/custom/compile-custom-lepu.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"compile-custom-lepu.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/custom/compile-custom-lepu.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,gBAAgB,EAAE,MAAM,gCAAgC,CAAC;AAClE,OAAO,EAAE,cAAc,EAAE,MAAM,8BAA8B,CAAC;AAkG9D;;;;;;GAMG;AACH,eAAO,MAAM,iBAAiB,GAC5B,IAAI,MAAM,EACV,MAAM,gBAAgB,EACtB,cAAc,SAAS,MAAM,EAAE,KAC9B,cAAc,GAAG,SA8CnB,CAAC"}

package/lib/typescript/module/src/modules/bt-management/services/custom/define-custom-device.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"define-custom-device.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/custom/define-custom-device.ts"],"names":[],"mappings":"AAEA,OAAO,EAAE,sBAAsB,EAAE,MAAM,sCAAsC,CAAC;AAE9E,OAAO,EAAE,gBAAgB,EAAE,MAAM,gCAAgC,CAAC;AAwGlE;;;;;;;GAOG;AACH,eAAO,MAAM,kBAAkB,GAC7B,MAAM,gBAAgB,KACrB,sBAqEF,CAAC"}
+{"version":3,"file":"define-custom-device.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/custom/define-custom-device.ts"],"names":[],"mappings":"AAEA,OAAO,EAAE,sBAAsB,EAAE,MAAM,sCAAsC,CAAC;AAE9E,OAAO,EAAE,gBAAgB,EAAE,MAAM,gCAAgC,CAAC;AAkIlE;;;;;;;GAOG;AACH,eAAO,MAAM,kBAAkB,GAC7B,MAAM,gBAAgB,KACrB,sBA8EF,CAAC"}

package/lib/typescript/module/src/modules/bt-management/services/device-creator.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"device-creator.d.ts","sourceRoot":"","sources":["../../../../../../../src/modules/bt-management/services/device-creator.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,cAAc,EAAE,MAAM,0BAA0B,CAAC;AAC1D,OAAO,EAAE,kBAAkB,EAAE,MAAM,+BAA+B,CAAC;AAEnE,OAAO,EAAE,SAAS,EAAE,MAAM,qBAAqB,CAAC;AAChD,OAAO,EAAE,WAAW,EAAE,MAAM,wBAAwB,CAAC;AAMrD,OAAO,EAAE,eAAe,EAAE,MAAM,6BAA6B,CAAC;AAyC9D,qBAAa,aAAa,CAAC,CAAC,SAAS,SAAS,cAAc,EAAE;IAKhD,OAAO,CAAC,QAAQ,CAAC,mBAAmB;IAJhD,OAAO,CAAC,eAAe,CAAuC;IAC9D,OAAO,CAAC,QAAQ,CAAC,cAAc,CAAO;IACtC,OAAO,CAAC,QAAQ,CAAC,aAAa,CAAsC;gBAEvC,mBAAmB,EAAE,CAAC;IAI5C,aAAa,GAAI,WAAW,MAAM,KAAG,WAAW,CAAC,CAAC,CAAC,GAAG,SAAS,CAkBpE;IAEK,YAAY,CAAC,CAAC,SAAS,SAAS,EACrC,MAAM,EAAE,kBAAkB,CAAC,CAAC,CAAC,GAC5B,eAAe,CAAC,CAAC,CAAC;IAwCd,OAAO,aAEZ;IAEF;;;OAGG;IACH,OAAO,CAAC,eAAe,CAmBrB;IAEF,OAAO,CAAC,eAAe;CAexB"}
+{"version":3,"file":"device-creator.d.ts","sourceRoot":"","sources":["../../../../../../../src/modules/bt-management/services/device-creator.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,cAAc,EAAE,MAAM,0BAA0B,CAAC;AAC1D,OAAO,EAAE,kBAAkB,EAAE,MAAM,+BAA+B,CAAC;AAEnE,OAAO,EAAE,SAAS,EAAE,MAAM,qBAAqB,CAAC;AAChD,OAAO,EAAE,WAAW,EAAE,MAAM,wBAAwB,CAAC;AAMrD,OAAO,EAAE,eAAe,EAAE,MAAM,6BAA6B,CAAC;AA6D9D,qBAAa,aAAa,CAAC,CAAC,SAAS,SAAS,cAAc,EAAE;IAKhD,OAAO,CAAC,QAAQ,CAAC,mBAAmB;IAJhD,OAAO,CAAC,eAAe,CAAuC;IAC9D,OAAO,CAAC,QAAQ,CAAC,cAAc,CAAO;IACtC,OAAO,CAAC,QAAQ,CAAC,aAAa,CAAsC;gBAEvC,mBAAmB,EAAE,CAAC;IAI5C,aAAa,GAAI,WAAW,MAAM,KAAG,WAAW,CAAC,CAAC,CAAC,GAAG,SAAS,CAkBpE;IAEK,YAAY,CAAC,CAAC,SAAS,SAAS,EACrC,MAAM,EAAE,kBAAkB,CAAC,CAAC,CAAC,GAC5B,eAAe,CAAC,CAAC,CAAC;IAmCd,OAAO,aAEZ;IAEF;;;OAGG;IACH,OAAO,CAAC,eAAe,CAmBrB;IAEF,OAAO,CAAC,eAAe;CAexB"}

package/lib/typescript/module/src/modules/bt-management/services/devices/aoj/aoj.thermometers.d.ts

@@ -0,0 +1,24 @@
+import { CustomDeviceDefinition } from "../../../types/custom-device-definition";
+interface AojDeviceParams {
+    /** Reported back as deviceData.name, and must not collide with a built-in device. */
+    id: string;
+    /** The name the hardware advertises. */
+    nameMatch: string | RegExp;
+    stuckDataTimeoutMs?: number;
+}
+/**
+ * The AOJ-20A infrared thermometer.
+ *
+ * Declared without a write characteristic, because the device sends its reading rather than
+ * waiting to be asked: the vendor app has a request for it, calls it from nowhere, and still
+ * displays temperatures - so the reply arrives when someone takes a measurement. Not writing
+ * also means not polling, which for a spot-check device would otherwise re-report the same
+ * reading for as long as the link stayed up.
+ *
+ * Only the realtime reply is declared. The stored-history reply shares the header and would
+ * need its own case; nothing reads history yet, and a case that decoded it into the same
+ * measurement would post old readings as though they had just been taken.
+ */
+export declare const aoj20aThermometer: (params: AojDeviceParams) => CustomDeviceDefinition;
+export {};
+//# sourceMappingURL=aoj.thermometers.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/devices/aoj/aoj.thermometers.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"aoj.thermometers.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/aoj/aoj.thermometers.ts"],"names":[],"mappings":"AAEA,OAAO,EAAE,sBAAsB,EAAE,MAAM,yCAAyC,CAAC;AAmCjF,UAAU,eAAe;IAEvB,qFAAqF;IACrF,EAAE,EAAE,MAAM,CAAC;IAEX,wCAAwC;IACxC,SAAS,EAAE,MAAM,GAAG,MAAM,CAAC;IAE3B,kBAAkB,CAAC,EAAE,MAAM,CAAC;CAC7B;AAED;;;;;;;;;;;;GAYG;AACH,eAAO,MAAM,iBAAiB,GAC5B,QAAQ,eAAe,KACtB,sBA0CC,CAAC"}

package/lib/typescript/module/src/modules/bt-management/services/devices/bp2/bp2.frame-reader.d.ts

@@ -1,14 +1,11 @@
-import { FrameReadResult } from "../../../types/frame-read-result";
-import { FrameReader } from "../../../types/frame-reader";
+import { LepuFrameReader } from "../lepu/lepu.frame-reader";
 /**
  * Reads Lepu protocol frames as used by the BP2.
  *
- * Layout: `a5 | cmd | ~cmd | type | seq | lenLow lenHigh | payload | crc8`, where the
- * checksum covers every byte before it. The complement of the command byte only narrows
- * the search for a start; the checksum is what actually decides a frame is trustworthy.
+ * The frame itself is shared across the family, so it lives in `LepuFrameReader`; the only
+ * thing that makes it a BP2 is which start byte it accepts.
  */
-export declare class BP2FrameReader implements FrameReader {
-    readFrame(buffer: readonly string[]): FrameReadResult;
-    private hasValidChecksum;
+export declare class BP2FrameReader extends LepuFrameReader {
+    constructor();
 }
 //# sourceMappingURL=bp2.frame-reader.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/devices/bp2/bp2.frame-reader.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"bp2.frame-reader.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/bp2/bp2.frame-reader.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,eAAe,EAAE,MAAM,kCAAkC,CAAC;AAEnE,OAAO,EAAE,WAAW,EAAE,MAAM,6BAA6B,CAAC;AA8C1D;;;;;;GAMG;AACH,qBAAa,cAAe,YAAW,WAAW;IACzC,SAAS,CAAC,MAAM,EAAE,SAAS,MAAM,EAAE,GAAG,eAAe;IAiC5D,OAAO,CAAC,gBAAgB;CAMzB"}
+{"version":3,"file":"bp2.frame-reader.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/bp2/bp2.frame-reader.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,eAAe,EAAE,MAAM,2BAA2B,CAAC;AAK5D;;;;;GAKG;AACH,qBAAa,cAAe,SAAQ,eAAe;;CAIlD"}

package/lib/typescript/module/src/modules/bt-management/services/devices/bt-command-writer.d.ts

@@ -0,0 +1,74 @@
+import { BleError, Device } from "react-native-ble-plx";
+import { DeviceCommand } from "../../types/device-command";
+/**
+ * The write channel to a connected device.
+ *
+ * These protocols allow one command outstanding at a time, and the reply to it is what
+ * decides the next one, so writes are serialised rather than merely guarded against
+ * re-entry. Refusing a command while another is in flight stalls a self-clocking exchange
+ * permanently: the refused command is the one that would have provoked the next reply, and
+ * nothing retries it.
+ */
+export declare class BTCommandWriter {
+    private readonly device;
+    private readonly onError?;
+    private pendingWrites;
+    private mtu;
+    constructor(device: Device, onError?: ((error: BleError | Error) => void) | undefined);
+    /**
+     * Records what the link actually negotiated.
+     *
+     * The floor stands until something says otherwise, because a link that has not
+     * negotiated is at the minimum, and over-estimating truncates while under-estimating
+     * only costs a second packet.
+     */
+    useNegotiatedMtu: (mtu?: number) => void;
+    /** Drops anything still queued, for a link that is going away. */
+    reset: () => void;
+    /**
+     * Queues commands behind whatever is already being written.
+     *
+     * The returned promise settles when the last of them has been written and never rejects.
+     * A write that fails is retried and reported where it happens; the catch here is a
+     * backstop, so that anything that gets past that still cannot poison the queue and
+     * silence every command after it.
+     */
+    send: (commands: readonly DeviceCommand[]) => Promise<void>;
+    private writeInOrder;
+    /**
+     * Writes one command, split to fit the link.
+     *
+     * A write longer than the negotiated MTU is truncated by the stack rather than refused,
+     * so an oversized command arrives as a shorter one whose header still looks valid. The
+     * Er2 negotiates the 23-byte minimum where the rest of the family grants 247, which is
+     * enough to cut a 28-byte file-read request in half.
+     *
+     * A chunk that cannot be written abandons the rest of the command. The device reassembles
+     * by arrival, so continuing past a gap would hand it a frame that is not the one asked
+     * for - worse than sending nothing, because it would be answered.
+     */
+    private writeCommand;
+    /**
+     * Writes one chunk the way the characteristic accepts writes.
+     *
+     * A with-response write to a characteristic that only supports write-without-response
+     * fails outright, so the command says which it is rather than the transport guessing.
+     */
+    private writeTo;
+    /**
+     * Splits a frame into writes the link will carry whole.
+     *
+     * A frame that already fits yields one chunk, so the common command - a poll of a handful
+     * of bytes - is written exactly as it was before there was any splitting at all.
+     */
+    private chunksOf;
+    /**
+     * Writes one chunk, retrying a failed write.
+     *
+     * The attempt count is local rather than an instance field, so a write that exhausted its
+     * retries cannot leave the next one with none left - which is what a shared counter did
+     * on any path that failed to reset it.
+     */
+    private writeChunk;
+}
+//# sourceMappingURL=bt-command-writer.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/devices/bt-command-writer.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"bt-command-writer.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/devices/bt-command-writer.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,QAAQ,EAAE,MAAM,EAAE,MAAM,sBAAsB,CAAC;AAIxD,OAAO,EAAE,aAAa,EAAE,MAAM,4BAA4B,CAAC;AAW3D;;;;;;;;GAQG;AACH,qBAAa,eAAe;IAKxB,OAAO,CAAC,QAAQ,CAAC,MAAM;IACvB,OAAO,CAAC,QAAQ,CAAC,OAAO,CAAC;IAL3B,OAAO,CAAC,aAAa,CAAoC;IACzD,OAAO,CAAC,GAAG,CAAmB;gBAGX,MAAM,EAAE,MAAM,EACd,OAAO,CAAC,GAAE,CAAC,KAAK,EAAE,QAAQ,GAAG,KAAK,KAAK,IAAI,aAAA;IAG9D;;;;;;OAMG;IACI,gBAAgB,GAAI,MAAM,MAAM,KAAG,IAAI,CAI5C;IAEF,kEAAkE;IAC3D,KAAK,QAAO,IAAI,CAErB;IAEF;;;;;;;OAOG;IACI,IAAI,GAAI,UAAU,SAAS,aAAa,EAAE,KAAG,OAAO,CAAC,IAAI,CAAC,CAQ/D;IAEF,OAAO,CAAC,YAAY,CAMlB;IAEF;;;;;;;;;;;OAWG;IACH,OAAO,CAAC,YAAY,CAQlB;IAEF;;;;;OAKG;IACH,OAAO,CAAC,OAAO,CAmBb;IAEF;;;;;OAKG;IACH,OAAO,CAAC,QAAQ,CASd;IAEF;;;;;;OAMG;IACH,OAAO,CAAC,UAAU,CA8BhB;CACH"}

package/lib/typescript/module/src/modules/bt-management/services/devices/bt-connection-handler.d.ts

@@ -1,10 +1,13 @@
 import { BleError, Device } from "react-native-ble-plx";
+import { DeviceCommand } from "../../types/device-command";
 import { DeviceStatus } from "../../types/device-status";
 import { IMedicalDevice } from "../../types/i-medical-device";
 interface ConnectionHandlerCallbacks {
     onStatusChanged?: (status: DeviceStatus) => void;
     onError?: (error: BleError | Error) => void;
     onDataReceived?: (uuid: string, value: string[]) => void;
+    /** The commands to send once every characteristic is subscribed. */
+    initialCommands?: () => readonly DeviceCommand[];
 }
 export declare class BTConnectionHandler {
     private readonly device;
@@ -13,12 +16,12 @@ export declare class BTConnectionHandler {
     private readonly preferredMtu?;
     private onDisconnectSubscription;
     private characteristicSubscriptions;
-    private isSendingCommand;
-    private retryCount;
+    private readonly writer;
     constructor(device: Device, mainServices: IMedicalDevice["mainService"], callbacks: ConnectionHandlerCallbacks, preferredMtu?: number | undefined);
     connect: () => Promise<void>;
     destroy: () => void;
-    sendCommandToDevice: () => Promise<void>;
+    /** Sends commands to the device, in order, one at a time. */
+    sendCommands: (commands: readonly DeviceCommand[]) => Promise<void>;
     /**
      * Asks for a larger MTU so a frame arrives in fewer notifications.
      *
@@ -29,7 +32,6 @@ export declare class BTConnectionHandler {
     private connectWithRetries;
     private onDeviceDisconnected;
     private subscribeToAllCharacteristics;
-    private sendCommand;
 }
 export {};
 //# sourceMappingURL=bt-connection-handler.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/devices/bt-connection-handler.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"bt-connection-handler.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/devices/bt-connection-handler.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,QAAQ,EAAE,MAAM,EAAgB,MAAM,sBAAsB,CAAC;AAItE,OAAO,EAAE,YAAY,EAAE,MAAM,2BAA2B,CAAC;AACzD,OAAO,EAAE,cAAc,EAAE,MAAM,8BAA8B,CAAC;AAK9D,UAAU,0BAA0B;IAClC,eAAe,CAAC,EAAE,CAAC,MAAM,EAAE,YAAY,KAAK,IAAI,CAAC;IACjD,OAAO,CAAC,EAAE,CAAC,KAAK,EAAE,QAAQ,GAAG,KAAK,KAAK,IAAI,CAAC;IAC5C,cAAc,CAAC,EAAE,CAAC,IAAI,EAAE,MAAM,EAAE,KAAK,EAAE,MAAM,EAAE,KAAK,IAAI,CAAC;CAC1D;AAED,qBAAa,mBAAmB;IAO5B,OAAO,CAAC,QAAQ,CAAC,MAAM;IACvB,OAAO,CAAC,QAAQ,CAAC,YAAY;IAC7B,OAAO,CAAC,QAAQ,CAAC,SAAS;IAC1B,OAAO,CAAC,QAAQ,CAAC,YAAY,CAAC;IAThC,OAAO,CAAC,wBAAwB,CAA2B;IAC3D,OAAO,CAAC,2BAA2B,CAAsB;IACzD,OAAO,CAAC,gBAAgB,CAAkB;IAC1C,OAAO,CAAC,UAAU,CAAa;gBAGZ,MAAM,EAAE,MAAM,EACd,YAAY,EAAE,cAAc,CAAC,aAAa,CAAC,EAC3C,SAAS,EAAE,0BAA0B,EACrC,YAAY,CAAC,EAAE,MAAM,YAAA;IAGjC,OAAO,sBAsBZ;IAEK,OAAO,aAOZ;IAEK,mBAAmB,QAAa,OAAO,CAAC,IAAI,CAAC,CAelD;IAEF;;;;;OAKG;IACH,OAAO,CAAC,mBAAmB,CAezB;IAEF,OAAO,CAAC,kBAAkB,CA2CxB;IAEF,OAAO,CAAC,oBAAoB,CAiB1B;IAEF,OAAO,CAAC,6BAA6B,CA4CnC;IAEF,OAAO,CAAC,WAAW,CAkCjB;CACH"}
+{"version":3,"file":"bt-connection-handler.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/devices/bt-connection-handler.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,QAAQ,EAAE,MAAM,EAAgB,MAAM,sBAAsB,CAAC;AAGtE,OAAO,EAAE,aAAa,EAAE,MAAM,4BAA4B,CAAC;AAC3D,OAAO,EAAE,YAAY,EAAE,MAAM,2BAA2B,CAAC;AACzD,OAAO,EAAE,cAAc,EAAE,MAAM,8BAA8B,CAAC;AAK9D,UAAU,0BAA0B;IAClC,eAAe,CAAC,EAAE,CAAC,MAAM,EAAE,YAAY,KAAK,IAAI,CAAC;IACjD,OAAO,CAAC,EAAE,CAAC,KAAK,EAAE,QAAQ,GAAG,KAAK,KAAK,IAAI,CAAC;IAC5C,cAAc,CAAC,EAAE,CAAC,IAAI,EAAE,MAAM,EAAE,KAAK,EAAE,MAAM,EAAE,KAAK,IAAI,CAAC;IAEzD,oEAAoE;IACpE,eAAe,CAAC,EAAE,MAAM,SAAS,aAAa,EAAE,CAAC;CAClD;AAED,qBAAa,mBAAmB;IAM5B,OAAO,CAAC,QAAQ,CAAC,MAAM;IACvB,OAAO,CAAC,QAAQ,CAAC,YAAY;IAC7B,OAAO,CAAC,QAAQ,CAAC,SAAS;IAC1B,OAAO,CAAC,QAAQ,CAAC,YAAY,CAAC;IARhC,OAAO,CAAC,wBAAwB,CAA2B;IAC3D,OAAO,CAAC,2BAA2B,CAAsB;IACzD,OAAO,CAAC,QAAQ,CAAC,MAAM,CAAkB;gBAGtB,MAAM,EAAE,MAAM,EACd,YAAY,EAAE,cAAc,CAAC,aAAa,CAAC,EAC3C,SAAS,EAAE,0BAA0B,EACrC,YAAY,CAAC,EAAE,MAAM,YAAA;IAKjC,OAAO,sBAsBZ;IAEK,OAAO,aAMZ;IAEF,6DAA6D;IACtD,YAAY,GAAI,UAAU,SAAS,aAAa,EAAE,KAAG,OAAO,CAAC,IAAI,CAAC,CAC5C;IAE7B;;;;;OAKG;IACH,OAAO,CAAC,mBAAmB,CAiBzB;IAEF,OAAO,CAAC,kBAAkB,CA2CxB;IAEF,OAAO,CAAC,oBAAoB,CAiB1B;IAEF,OAAO,CAAC,6BAA6B,CA4CnC;CAEH"}

package/lib/typescript/module/src/modules/bt-management/services/devices/bt-data-processor.d.ts

@@ -1,6 +1,7 @@
 import { Measurement, MeasurementTypeKey } from "@ovok/core";
 import { Device } from "react-native-ble-plx";
 import { DependentResultHandlerParams } from "../../types/dependent-result-handler-params";
+import { DeviceCommand } from "../../types/device-command";
 import { DeviceStatus } from "../../types/device-status";
 import { FrameReader } from "../../types/frame-reader";
 import { IMedicalDevice } from "../../types/i-medical-device";
@@ -10,7 +11,16 @@ interface DataProcessorCallbacks<T extends Measurement> {
     onStatusChanged?: (status: DeviceStatus, measurementTypeKey?: MeasurementTypeKey) => void;
     onStreamStart?: () => void;
     onResult?: (parsedData: MeasurementWithCaseType<Measurement>, collectedValues: string[]) => boolean | void;
-    onSendCommandToDevice?: () => void;
+    /**
+     * Decides what to send in answer to one complete frame, if anything.
+     *
+     * The frame rather than nothing, because these exchanges are self-clocking: a file read
+     * walks its offsets from the reply it just got, and an identity check gates every later
+     * command on the first one. Neither can be expressed by re-sending a fixed frame.
+     */
+    nextCommand?: (frame: readonly string[]) => readonly DeviceCommand[] | undefined;
+    /** Sends what `nextCommand` decided. */
+    sendCommands?: (commands: readonly DeviceCommand[]) => void;
     onError?: (error: Error) => void;
     handleDependentResult?: (data: DependentResultHandlerParams<T>) => DependentResultHandlerParams<T>;
 }
@@ -48,6 +58,15 @@ export declare class BTDataProcessor<T extends Measurement> {
      * Treats the whole buffer as one frame, for devices that have not declared a reader.
      */
     private readWholeBuffer;
+    /**
+     * Answers one complete frame with whatever the device's sequencer decides.
+     *
+     * Every frame is offered, including one that matched no parsing case. An identity reply
+     * and a file-transfer chunk carry no measurement, and a sequencer that never saw them
+     * could not take the step that follows - the exchange would stop dead on the first frame
+     * that was protocol rather than data.
+     */
+    private answerFrame;
     private handleFrame;
     private reportCorruptFrame;
     /**

package/lib/typescript/module/src/modules/bt-management/services/devices/bt-data-processor.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"bt-data-processor.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/devices/bt-data-processor.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,WAAW,EAAE,kBAAkB,EAAE,MAAM,YAAY,CAAC;AAC7D,OAAO,EAAE,MAAM,EAAE,MAAM,sBAAsB,CAAC;AAI9C,OAAO,EAAE,4BAA4B,EAAE,MAAM,6CAA6C,CAAC;AAC3F,OAAO,EAAE,YAAY,EAAE,MAAM,2BAA2B,CAAC;AAEzD,OAAO,EAAE,WAAW,EAAE,MAAM,0BAA0B,CAAC;AACvD,OAAO,EAAE,cAAc,EAAE,MAAM,8BAA8B,CAAC;AAC9D,OAAO,EAAE,uBAAuB,EAAE,MAAM,wCAAwC,CAAC;AAKjF,UAAU,sBAAsB,CAAC,CAAC,SAAS,WAAW;IACpD,eAAe,EAAE,CAAC,GAAG,EAAE,MAAM,EAAE,EAAE,IAAI,EAAE,MAAM,KAAK,OAAO,CAAC;IAC1D,eAAe,CAAC,EAAE,CAChB,MAAM,EAAE,YAAY,EACpB,kBAAkB,CAAC,EAAE,kBAAkB,KACpC,IAAI,CAAC;IACV,aAAa,CAAC,EAAE,MAAM,IAAI,CAAC;IAC3B,QAAQ,CAAC,EAAE,CACT,UAAU,EAAE,uBAAuB,CAAC,WAAW,CAAC,EAChD,eAAe,EAAE,MAAM,EAAE,KACtB,OAAO,GAAG,IAAI,CAAC;IACpB,qBAAqB,CAAC,EAAE,MAAM,IAAI,CAAC;IACnC,OAAO,CAAC,EAAE,CAAC,KAAK,EAAE,KAAK,KAAK,IAAI,CAAC;IACjC,qBAAqB,CAAC,EAAE,CACtB,IAAI,EAAE,4BAA4B,CAAC,CAAC,CAAC,KAClC,4BAA4B,CAAC,CAAC,CAAC,CAAC;CACtC;AAED,qBAAa,eAAe,CAAC,CAAC,SAAS,WAAW;IAe9C,OAAO,CAAC,QAAQ,CAAC,MAAM;IAEvB,OAAO,CAAC,QAAQ,CAAC,wBAAwB;IACzC,OAAO,CAAC,QAAQ,CAAC,SAAS;IAC1B,OAAO,CAAC,QAAQ,CAAC,WAAW,CAAC;IAlB/B;;;;;;;;OAQG;IACH,OAAO,CAAC,OAAO,CAA+B;IAC9C,OAAO,CAAC,QAAQ,CAAC,WAAW,CAAiB;IAC7C,OAAO,CAAC,QAAQ,CAAC,gBAAgB,CAA6B;IAC9D,OAAO,CAAC,gBAAgB,CAA4C;gBAEjD,MAAM,EAAE,MAAM,EAC/B,YAAY,EAAE,cAAc,CAAC,aAAa,CAAC,EAC1B,wBAAwB,EAAE,MAAM,EAChC,SAAS,EAAE,sBAAsB,CAAC,CAAC,CAAC,EACpC,WAAW,CAAC,EAAE,WAAW,YAAA;IAU5C,OAAO,CAAC,WAAW,CAAc;IAE1B,OAAO,aAMZ;IAEK,WAAW,GAAI,MAAM,MAAM,EAAE,UAAU,MAAM,EAAE,UAgBpD;IAEF;;;;;;OAMG;IACH,OAAO,CAAC,oBAAoB,CAgC1B;IAEF;;OAEG;IACH,OAAO,CAAC,eAAe,CAQrB;IAEF,OAAO,CAAC,WAAW,CAuBjB;IAEF,OAAO,CAAC,kBAAkB,CAQxB;IAEF;;;;;;;OAOG;IACH,OAAO,CAAC,iBAAiB,CAevB;CACH"}
+{"version":3,"file":"bt-data-processor.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/devices/bt-data-processor.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,WAAW,EAAE,kBAAkB,EAAE,MAAM,YAAY,CAAC;AAC7D,OAAO,EAAE,MAAM,EAAE,MAAM,sBAAsB,CAAC;AAI9C,OAAO,EAAE,4BAA4B,EAAE,MAAM,6CAA6C,CAAC;AAC3F,OAAO,EAAE,aAAa,EAAE,MAAM,4BAA4B,CAAC;AAC3D,OAAO,EAAE,YAAY,EAAE,MAAM,2BAA2B,CAAC;AAEzD,OAAO,EAAE,WAAW,EAAE,MAAM,0BAA0B,CAAC;AACvD,OAAO,EAAE,cAAc,EAAE,MAAM,8BAA8B,CAAC;AAC9D,OAAO,EAAE,uBAAuB,EAAE,MAAM,wCAAwC,CAAC;AAKjF,UAAU,sBAAsB,CAAC,CAAC,SAAS,WAAW;IACpD,eAAe,EAAE,CAAC,GAAG,EAAE,MAAM,EAAE,EAAE,IAAI,EAAE,MAAM,KAAK,OAAO,CAAC;IAC1D,eAAe,CAAC,EAAE,CAChB,MAAM,EAAE,YAAY,EACpB,kBAAkB,CAAC,EAAE,kBAAkB,KACpC,IAAI,CAAC;IACV,aAAa,CAAC,EAAE,MAAM,IAAI,CAAC;IAC3B,QAAQ,CAAC,EAAE,CACT,UAAU,EAAE,uBAAuB,CAAC,WAAW,CAAC,EAChD,eAAe,EAAE,MAAM,EAAE,KACtB,OAAO,GAAG,IAAI,CAAC;IAEpB;;;;;;OAMG;IACH,WAAW,CAAC,EAAE,CAAC,KAAK,EAAE,SAAS,MAAM,EAAE,KAAK,SAAS,aAAa,EAAE,GAAG,SAAS,CAAC;IAEjF,wCAAwC;IACxC,YAAY,CAAC,EAAE,CAAC,QAAQ,EAAE,SAAS,aAAa,EAAE,KAAK,IAAI,CAAC;IAE5D,OAAO,CAAC,EAAE,CAAC,KAAK,EAAE,KAAK,KAAK,IAAI,CAAC;IACjC,qBAAqB,CAAC,EAAE,CACtB,IAAI,EAAE,4BAA4B,CAAC,CAAC,CAAC,KAClC,4BAA4B,CAAC,CAAC,CAAC,CAAC;CACtC;AAED,qBAAa,eAAe,CAAC,CAAC,SAAS,WAAW;IAe9C,OAAO,CAAC,QAAQ,CAAC,MAAM;IAEvB,OAAO,CAAC,QAAQ,CAAC,wBAAwB;IACzC,OAAO,CAAC,QAAQ,CAAC,SAAS;IAC1B,OAAO,CAAC,QAAQ,CAAC,WAAW,CAAC;IAlB/B;;;;;;;;OAQG;IACH,OAAO,CAAC,OAAO,CAA+B;IAC9C,OAAO,CAAC,QAAQ,CAAC,WAAW,CAAiB;IAC7C,OAAO,CAAC,QAAQ,CAAC,gBAAgB,CAA6B;IAC9D,OAAO,CAAC,gBAAgB,CAA4C;gBAEjD,MAAM,EAAE,MAAM,EAC/B,YAAY,EAAE,cAAc,CAAC,aAAa,CAAC,EAC1B,wBAAwB,EAAE,MAAM,EAChC,SAAS,EAAE,sBAAsB,CAAC,CAAC,CAAC,EACpC,WAAW,CAAC,EAAE,WAAW,YAAA;IAU5C,OAAO,CAAC,WAAW,CAAc;IAE1B,OAAO,aAMZ;IAEK,WAAW,GAAI,MAAM,MAAM,EAAE,UAAU,MAAM,EAAE,UAgBpD;IAEF;;;;;;OAMG;IACH,OAAO,CAAC,oBAAoB,CA0B1B;IAEF;;OAEG;IACH,OAAO,CAAC,eAAe,CAQrB;IAEF;;;;;;;OAOG;IACH,OAAO,CAAC,WAAW,CAMjB;IAEF,OAAO,CAAC,WAAW,CAuBjB;IAEF,OAAO,CAAC,kBAAkB,CAQxB;IAEF;;;;;;;OAOG;IACH,OAAO,CAAC,iBAAiB,CAevB;CACH"}

package/lib/typescript/module/src/modules/bt-management/services/devices/bt-managed-device.d.ts

@@ -1,5 +1,6 @@
 import { Measurement, MeasurementTypeKey } from "@ovok/core";
 import { BleError, Device } from "react-native-ble-plx";
+import { CommandSequencer } from "../../types/command-sequencer";
 import { CreateDeviceParams } from "../../types/create-device-params";
 import { DependentResultHandlerParams } from "../../types/dependent-result-handler-params";
 import { DeviceData } from "../../types/device-data";
@@ -31,6 +32,17 @@ export declare abstract class BTManagedDevice<T extends DeviceKey = IntegratedDe
      */
     protected handleDependentResult?: (data: DependentResultHandlerParams<MeasurementTypeForDevices<[T]>>) => DependentResultHandlerParams<MeasurementTypeForDevices<[T]>>;
     protected abstract mainServices: IMedicalDevice["mainService"];
+    /**
+     * Builds the policy that decides what to send this device, and when.
+     *
+     * A factory rather than an instance, because a sequencer carries the state of the
+     * exchange - whether the device has identified itself, how far a file read has got. One
+     * shared across connections would resume a conversation the device has forgotten.
+     *
+     * A device that leaves this undefined polls with the command its services declare, which
+     * is what every device did before a policy could be expressed at all.
+     */
+    protected createCommandSequencer?: () => CommandSequencer;
     /**
      * Locates frame boundaries inside the notification buffer.
      *
@@ -62,6 +74,5 @@ export declare abstract class BTManagedDevice<T extends DeviceKey = IntegratedDe
     constructor(device: Device, { deviceName, onError: onErrorCallback, onDeviceStatusChanged: onDeviceStatusChangedCallback, onResult: onResultCallback, onDeviceDisconnected: onDeviceDisconnectedCallback, }: CreateDeviceParams<T>);
     destroy: () => void;
     connect: () => Promise<void>;
-    private getSupportedMeasurementTypeKeys;
 }
 //# sourceMappingURL=bt-managed-device.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/devices/bt-managed-device.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"bt-managed-device.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/devices/bt-managed-device.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,WAAW,EAAE,kBAAkB,EAAE,MAAM,YAAY,CAAC;AAC7D,OAAO,EAAE,QAAQ,EAAE,MAAM,EAAE,MAAM,sBAAsB,CAAC;AAGxD,OAAO,EAAE,kBAAkB,EAAE,MAAM,kCAAkC,CAAC;AACtE,OAAO,EAAE,4BAA4B,EAAE,MAAM,6CAA6C,CAAC;AAC3F,OAAO,EAAE,UAAU,EAAE,MAAM,yBAAyB,CAAC;AACrD,OAAO,EAAE,SAAS,EAAE,MAAM,wBAAwB,CAAC;AACnD,OAAO,EAAE,yBAAyB,EAAE,MAAM,oCAAoC,CAAC;AAC/E,OAAO,EAAE,YAAY,EAAE,MAAM,2BAA2B,CAAC;AACzD,OAAO,EAAE,WAAW,EAAE,MAAM,0BAA0B,CAAC;AACvD,OAAO,EAAE,gBAAgB,EAAE,MAAM,iCAAiC,CAAC;AACnE,OAAO,EAAE,cAAc,EAAE,MAAM,8BAA8B,CAAC;AAC9D,OAAO,EAAE,iBAAiB,EAAE,MAAM,gCAAgC,CAAC;AACnE,OAAO,EAAE,uBAAuB,EAAE,MAAM,wCAAwC,CAAC;AAKjF,8BAAsB,eAAe,CAAC,CAAC,SAAS,SAAS,GAAG,iBAAiB,CAAC,GAAG,CAC/E,YAAW,gBAAgB;aAqET,MAAM,EAAE,MAAM;IAnEzB,EAAE,EAAE,MAAM,CAAC;IAElB,OAAO,CAAC,iBAAiB,CAAkC;IAC3D,OAAO,CAAC,aAAa,CAEP;IACP,UAAU,EAAE,UAAU,CAAC;IAE9B;;OAEG;IACH,SAAS,CAAC,QAAQ,CAAC,gBAAgB,EAAE,MAAM,CAAC;IAE5C;;;;;;;OAOG;IACH,SAAS,CAAC,qBAAqB,CAAC,EAAE,CAChC,IAAI,EAAE,4BAA4B,CAAC,yBAAyB,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,KAC/D,4BAA4B,CAAC,yBAAyB,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IAElE,SAAS,CAAC,QAAQ,CAAC,YAAY,EAAE,cAAc,CAAC,aAAa,CAAC,CAAC;IAE/D;;;;;;OAMG;IACH,SAAS,CAAC,WAAW,CAAC,EAAE,WAAW,CAAC;IAEpC;;;;;OAKG;IACH,SAAS,CAAC,YAAY,CAAC,EAAE,MAAM,CAAC;IAEhC;;;;;OAKG;IACH,SAAS,CAAC,eAAe,CAAC,EAAE,CAAC,GAAG,EAAE,MAAM,EAAE,EAAE,IAAI,EAAE,MAAM,KAAK,OAAO,CAAC;IACrE,SAAS,CAAC,QAAQ,CAAC,aAAa,CAAC,EAAE,MAAM,IAAI,CAAC;IAC9C,SAAS,CAAC,QAAQ,CAAC,mBAAmB,CACpC,aAAa,EAAE,uBAAuB,CAAC,WAAW,CAAC,EACnD,eAAe,EAAE,MAAM,EAAE,GACxB,IAAI,GAAG,OAAO;IAEV,OAAO,CAAC,EAAE,CAAC,KAAK,EAAE,QAAQ,GAAG,KAAK,GAAG,MAAM,KAAK,IAAI,CAAC;IACrD,qBAAqB,CAAC,EAAE,CAC7B,MAAM,EAAE,YAAY,EACpB,kBAAkB,CAAC,EAAE,kBAAkB,KACpC,IAAI,CAAC;IACH,QAAQ,CAAC,EAAE,CAChB,IAAI,EAAE,uBAAuB,CAAC,yBAAyB,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,KAC1D,IAAI,CAAC;IACH,oBAAoB,CAAC,EAAE,MAAM,IAAI,CAAC;gBAEvB,MAAM,EAAE,MAAM,EAE9B,EACE,UAAU,EACV,OAAO,EAAE,eAAe,EACxB,qBAAqB,EAAE,6BAA6B,EACpD,QAAQ,EAAE,gBAAgB,EAC1B,oBAAoB,EAAE,4BAA4B,GACnD,EAAE,kBAAkB,CAAC,CAAC,CAAC;IAsEnB,OAAO,aAUZ;IAEK,OAAO,sBAkDZ;IAEF,OAAO,CAAC,+BAA+B,CAarC;CACH"}
+{"version":3,"file":"bt-managed-device.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/devices/bt-managed-device.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,WAAW,EAAE,kBAAkB,EAAE,MAAM,YAAY,CAAC;AAC7D,OAAO,EAAE,QAAQ,EAAE,MAAM,EAAE,MAAM,sBAAsB,CAAC;AAGxD,OAAO,EAAE,gBAAgB,EAAE,MAAM,+BAA+B,CAAC;AACjE,OAAO,EAAE,kBAAkB,EAAE,MAAM,kCAAkC,CAAC;AACtE,OAAO,EAAE,4BAA4B,EAAE,MAAM,6CAA6C,CAAC;AAC3F,OAAO,EAAE,UAAU,EAAE,MAAM,yBAAyB,CAAC;AACrD,OAAO,EAAE,SAAS,EAAE,MAAM,wBAAwB,CAAC;AACnD,OAAO,EAAE,yBAAyB,EAAE,MAAM,oCAAoC,CAAC;AAC/E,OAAO,EAAE,YAAY,EAAE,MAAM,2BAA2B,CAAC;AACzD,OAAO,EAAE,WAAW,EAAE,MAAM,0BAA0B,CAAC;AACvD,OAAO,EAAE,gBAAgB,EAAE,MAAM,iCAAiC,CAAC;AACnE,OAAO,EAAE,cAAc,EAAE,MAAM,8BAA8B,CAAC;AAC9D,OAAO,EAAE,iBAAiB,EAAE,MAAM,gCAAgC,CAAC;AACnE,OAAO,EAAE,uBAAuB,EAAE,MAAM,wCAAwC,CAAC;AAQjF,8BAAsB,eAAe,CAAC,CAAC,SAAS,SAAS,GAAG,iBAAiB,CAAC,GAAG,CAC/E,YAAW,gBAAgB;aAiFT,MAAM,EAAE,MAAM;IA/EzB,EAAE,EAAE,MAAM,CAAC;IAElB,OAAO,CAAC,iBAAiB,CAAkC;IAC3D,OAAO,CAAC,aAAa,CAEP;IACP,UAAU,EAAE,UAAU,CAAC;IAE9B;;OAEG;IACH,SAAS,CAAC,QAAQ,CAAC,gBAAgB,EAAE,MAAM,CAAC;IAE5C;;;;;;;OAOG;IACH,SAAS,CAAC,qBAAqB,CAAC,EAAE,CAChC,IAAI,EAAE,4BAA4B,CAAC,yBAAyB,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,KAC/D,4BAA4B,CAAC,yBAAyB,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IAElE,SAAS,CAAC,QAAQ,CAAC,YAAY,EAAE,cAAc,CAAC,aAAa,CAAC,CAAC;IAE/D;;;;;;;;;OASG;IACH,SAAS,CAAC,sBAAsB,CAAC,EAAE,MAAM,gBAAgB,CAAC;IAE1D;;;;;;OAMG;IACH,SAAS,CAAC,WAAW,CAAC,EAAE,WAAW,CAAC;IAEpC;;;;;OAKG;IACH,SAAS,CAAC,YAAY,CAAC,EAAE,MAAM,CAAC;IAEhC;;;;;OAKG;IACH,SAAS,CAAC,eAAe,CAAC,EAAE,CAAC,GAAG,EAAE,MAAM,EAAE,EAAE,IAAI,EAAE,MAAM,KAAK,OAAO,CAAC;IACrE,SAAS,CAAC,QAAQ,CAAC,aAAa,CAAC,EAAE,MAAM,IAAI,CAAC;IAC9C,SAAS,CAAC,QAAQ,CAAC,mBAAmB,CACpC,aAAa,EAAE,uBAAuB,CAAC,WAAW,CAAC,EACnD,eAAe,EAAE,MAAM,EAAE,GACxB,IAAI,GAAG,OAAO;IAEV,OAAO,CAAC,EAAE,CAAC,KAAK,EAAE,QAAQ,GAAG,KAAK,GAAG,MAAM,KAAK,IAAI,CAAC;IACrD,qBAAqB,CAAC,EAAE,CAC7B,MAAM,EAAE,YAAY,EACpB,kBAAkB,CAAC,EAAE,kBAAkB,KACpC,IAAI,CAAC;IACH,QAAQ,CAAC,EAAE,CAChB,IAAI,EAAE,uBAAuB,CAAC,yBAAyB,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,KAC1D,IAAI,CAAC;IACH,oBAAoB,CAAC,EAAE,MAAM,IAAI,CAAC;gBAEvB,MAAM,EAAE,MAAM,EAE9B,EACE,UAAU,EACV,OAAO,EAAE,eAAe,EACxB,qBAAqB,EAAE,6BAA6B,EACpD,QAAQ,EAAE,gBAAgB,EAC1B,oBAAoB,EAAE,4BAA4B,GACnD,EAAE,kBAAkB,CAAC,CAAC,CAAC;IAgEnB,OAAO,aAUZ;IAEK,OAAO,sBAyDZ;CAEH"}

package/lib/typescript/module/src/modules/bt-management/services/devices/custom/custom-lepu-sequencer.d.ts

@@ -0,0 +1,30 @@
+import { CommandSequencer } from "../../../types/command-sequencer";
+import { CustomLepuSpec } from "../../../types/custom-lepu-spec";
+import { DeviceData } from "../../../types/device-data";
+import { LepuDeviceInfo } from "../lepu/lepu.device-info";
+interface IdentityReport {
+    onIdentified: (info: LepuDeviceInfo) => void;
+    onRefused: (reason: string) => void;
+}
+/**
+ * Builds the gate a Lepu declaration asks for.
+ *
+ * A fresh builder each time, because its sequence number is per connection: one shared
+ * across devices would interleave their counters, which is a defect the vendor's own global
+ * counter has.
+ *
+ * Frames are built with the first declared start byte. A device that accepts either still
+ * answers on the one it is addressed with, so the list matters for reading and its head for
+ * writing.
+ */
+/**
+ * Records what the device said it was.
+ *
+ * The model number is logged because it is the only place one exists: the vendor's SDK
+ * never reads the field back, so a declaration written without it is completed by
+ * connecting once and reading this line.
+ */
+declare const recordLepuIdentity: (deviceData: DeviceData, info: LepuDeviceInfo) => void;
+declare const createLepuSequencer: (lepu: CustomLepuSpec, report: IdentityReport) => CommandSequencer;
+export { createLepuSequencer, recordLepuIdentity };
+//# sourceMappingURL=custom-lepu-sequencer.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/devices/custom/custom-lepu-sequencer.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"custom-lepu-sequencer.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/custom/custom-lepu-sequencer.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,gBAAgB,EAAE,MAAM,kCAAkC,CAAC;AACpE,OAAO,EAAE,cAAc,EAAE,MAAM,iCAAiC,CAAC;AACjE,OAAO,EAAE,UAAU,EAAE,MAAM,4BAA4B,CAAC;AAExD,OAAO,EAAE,cAAc,EAAE,MAAM,0BAA0B,CAAC;AAM1D,UAAU,cAAc;IACtB,YAAY,EAAE,CAAC,IAAI,EAAE,cAAc,KAAK,IAAI,CAAC;IAC7C,SAAS,EAAE,CAAC,MAAM,EAAE,MAAM,KAAK,IAAI,CAAC;CACrC;AAED;;;;;;;;;;GAUG;AACH;;;;;;GAMG;AACH,QAAA,MAAM,kBAAkB,GACtB,YAAY,UAAU,EACtB,MAAM,cAAc,KACnB,IAUF,CAAC;AAEF,QAAA,MAAM,mBAAmB,GACvB,MAAM,cAAc,EACpB,QAAQ,cAAc,KACrB,gBAWC,CAAC;AAEL,OAAO,EAAE,mBAAmB,EAAE,kBAAkB,EAAE,CAAC"}

package/lib/typescript/module/src/modules/bt-management/services/devices/custom/custom.device.d.ts

@@ -23,6 +23,16 @@ export declare class CustomDevice extends BTManagedDevice<CustomDeviceId> {
     private readonly definition;
     private readonly validators;
     constructor(device: Device, params: CreateDeviceParams<CustomDeviceId>, definition: CustomDeviceDefinition);
+    /**
+     * Gives a Lepu declaration its frame reader and its command sequence.
+     *
+     * Both or neither: the reader finds frame edges the family's own way, and the gate is
+     * what decides anything may be sent at all. A declaration that had the reader without the
+     * gate would poll hardware it had not identified, which is the case the gate exists for.
+     */
+    private declareLepuProtocol;
+    private onIdentified;
+    private onIdentityRefused;
     protected validatePackage: (pkg: string[], uuid: string) => boolean;
     /**
      * Every declared "result" frame arrives here, whether or not the device streamed first.
@@ -35,9 +45,29 @@ export declare class CustomDevice extends BTManagedDevice<CustomDeviceId> {
      * readings themselves are reported from handleDependentResult, so there is nothing to do.
      */
     protected handleSuccessResult(): void | boolean;
+    /**
+     * Reports what the frame carried, which may be more than one reading.
+     *
+     * A device handing over its stored history answers one request with every record it
+     * holds, back to back. Those were taken at different times and are separate readings, so
+     * each record is decoded and reported on its own. A trailing part-record is ignored: half
+     * a record is not a reading.
+     */
+    private reportFrame;
+    /**
+     * Reports every reading the frame carried.
+     *
+     * One frame is often one reading, but a multi-parameter monitor sends a heart rate, an
+     * oxygen saturation and a temperature together. Those are separate measurements, so they
+     * are reported separately rather than merged into one object whose properties came from
+     * different instruments.
+     *
+     * A reading that fails its checks is discarded on its own. A temperature the device could
+     * not take is no reason to withhold the heart rate in the same frame.
+     */
     private report;
-    private reject;
-    private fail;
+    private discard;
+    private reportMeasurement;
 }
 export {};
 //# sourceMappingURL=custom.device.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/devices/custom/custom.device.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"custom.device.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/custom/custom.device.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,MAAM,EAAE,MAAM,sBAAsB,CAAC;AAG9C,OAAO,EAAE,kBAAkB,EAAE,MAAM,qCAAqC,CAAC;AACzE,OAAO,EAAE,sBAAsB,EAAE,MAAM,yCAAyC,CAAC;AACjF,OAAO,EAAE,cAAc,EAAE,MAAM,iCAAiC,CAAC;AACjE,OAAO,EAAE,4BAA4B,EAAE,MAAM,gDAAgD,CAAC;AAC9F,OAAO,EAAE,yBAAyB,EAAE,MAAM,uCAAuC,CAAC;AAElF,OAAO,EAAE,QAAQ,EAAE,MAAM,6BAA6B,CAAC;AAEvD,OAAO,EAAE,eAAe,EAAE,MAAM,sBAAsB,CAAC;AAEvD,KAAK,mBAAmB,GAAG,yBAAyB,CAAC,CAAC,cAAc,CAAC,CAAC,CAAC;AAKvE;;;;;;;;GAQG;AACH,qBAAa,YAAa,SAAQ,eAAe,CAAC,cAAc,CAAC;IAC/D,SAAS,CAAC,YAAY,EAAE,QAAQ,EAAE,CAAC;IACnC,SAAS,CAAC,gBAAgB,EAAE,MAAM,CAAC;IACnC,SAAS,CAAC,aAAa,CAAC,EAAE,CAAC,MAAM,IAAI,CAAC,GAAG,SAAS,CAAC;IAEnD,OAAO,CAAC,QAAQ,CAAC,UAAU,CAAyB;IACpD,OAAO,CAAC,QAAQ,CAAC,UAAU,CAAiD;gBAG1E,MAAM,EAAE,MAAM,EACd,MAAM,EAAE,kBAAkB,CAAC,cAAc,CAAC,EAC1C,UAAU,EAAE,sBAAsB;IAapC,SAAS,CAAC,eAAe,GAAI,KAAK,MAAM,EAAE,EAAE,MAAM,MAAM,KAAG,OAAO,CAQhE;IAEF;;;;OAIG;IACH,SAAS,CAAC,qBAAqB,GAC7B,MAAM,4BAA4B,CAAC,mBAAmB,CAAC,KACtD,4BAA4B,CAAC,mBAAmB,CAAC,CAWlD;IAEF;;;OAGG;IACH,SAAS,CAAC,mBAAmB,IAAI,IAAI,GAAG,OAAO;IAI/C,OAAO,CAAC,MAAM;IAgCd,OAAO,CAAC,MAAM;IAsBd,OAAO,CAAC,IAAI;CAOb"}
+{"version":3,"file":"custom.device.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/custom/custom.device.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,MAAM,EAAE,MAAM,sBAAsB,CAAC;AAG9C,OAAO,EAAE,kBAAkB,EAAE,MAAM,qCAAqC,CAAC;AACzE,OAAO,EAAE,sBAAsB,EAAE,MAAM,yCAAyC,CAAC;AACjF,OAAO,EAAE,cAAc,EAAE,MAAM,iCAAiC,CAAC;AACjE,OAAO,EAAE,4BAA4B,EAAE,MAAM,gDAAgD,CAAC;AAC9F,OAAO,EAAE,yBAAyB,EAAE,MAAM,uCAAuC,CAAC;AAIlF,OAAO,EAAE,QAAQ,EAAE,MAAM,6BAA6B,CAAC;AAOvD,OAAO,EAAE,eAAe,EAAE,MAAM,sBAAsB,CAAC;AASvD,KAAK,mBAAmB,GAAG,yBAAyB,CAAC,CAAC,cAAc,CAAC,CAAC,CAAC;AAGvE;;;;;;;;GAQG;AACH,qBAAa,YAAa,SAAQ,eAAe,CAAC,cAAc,CAAC;IAC/D,SAAS,CAAC,YAAY,EAAE,QAAQ,EAAE,CAAC;IACnC,SAAS,CAAC,gBAAgB,EAAE,MAAM,CAAC;IACnC,SAAS,CAAC,aAAa,CAAC,EAAE,CAAC,MAAM,IAAI,CAAC,GAAG,SAAS,CAAC;IAEnD,OAAO,CAAC,QAAQ,CAAC,UAAU,CAAyB;IACpD,OAAO,CAAC,QAAQ,CAAC,UAAU,CAAiD;gBAG1E,MAAM,EAAE,MAAM,EACd,MAAM,EAAE,kBAAkB,CAAC,cAAc,CAAC,EAC1C,UAAU,EAAE,sBAAsB;IAmBpC;;;;;;OAMG;IACH,OAAO,CAAC,mBAAmB;IAgB3B,OAAO,CAAC,YAAY,CACwB;IAE5C,OAAO,CAAC,iBAAiB,CAMvB;IAEF,SAAS,CAAC,eAAe,GAAI,KAAK,MAAM,EAAE,EAAE,MAAM,MAAM,KAAG,OAAO,CAQhE;IAEF;;;;OAIG;IACH,SAAS,CAAC,qBAAqB,GAC7B,MAAM,4BAA4B,CAAC,mBAAmB,CAAC,KACtD,4BAA4B,CAAC,mBAAmB,CAAC,CAWlD;IAEF;;;OAGG;IACH,SAAS,CAAC,mBAAmB,IAAI,IAAI,GAAG,OAAO;IAI/C;;;;;;;OAOG;IACH,OAAO,CAAC,WAAW;IAyBnB;;;;;;;;;;OAUG;IACH,OAAO,CAAC,MAAM;IAcd,OAAO,CAAC,OAAO;IAIf,OAAO,CAAC,iBAAiB;CAiC1B"}

package/lib/typescript/module/src/modules/bt-management/services/devices/frame-parser.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"frame-parser.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/devices/frame-parser.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,WAAW,EAAE,MAAM,YAAY,CAAC;AAEzC,OAAO,EAAE,4BAA4B,EAAE,MAAM,6CAA6C,CAAC;AAC3F,OAAO,EAAE,cAAc,EAAE,MAAM,8BAA8B,CAAC;AAK9D;;;;;;;GAOG;AACH,qBAAa,WAAW,CAAC,CAAC,SAAS,WAAW;IAChC,OAAO,CAAC,QAAQ,CAAC,YAAY;gBAAZ,YAAY,EAAE,cAAc,CAAC,aAAa,CAAC;IAEjE,KAAK,CACV,IAAI,EAAE,MAAM,EACZ,KAAK,EAAE,MAAM,EAAE,GACd,4BAA4B,CAAC,CAAC,CAAC,GAAG,SAAS;IA8B9C,OAAO,CAAC,gBAAgB;IAcxB,OAAO,CAAC,aAAa;CAMtB"}
+{"version":3,"file":"frame-parser.d.ts","sourceRoot":"","sources":["../../../../../../../../src/modules/bt-management/services/devices/frame-parser.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,WAAW,EAAE,MAAM,YAAY,CAAC;AAEzC,OAAO,EAAE,4BAA4B,EAAE,MAAM,6CAA6C,CAAC;AAC3F,OAAO,EAAE,cAAc,EAAE,MAAM,8BAA8B,CAAC;AAK9D;;;;;;;GAOG;AACH,qBAAa,WAAW,CAAC,CAAC,SAAS,WAAW;IAChC,OAAO,CAAC,QAAQ,CAAC,YAAY;gBAAZ,YAAY,EAAE,cAAc,CAAC,aAAa,CAAC;IAEjE,KAAK,CACV,IAAI,EAAE,MAAM,EACZ,KAAK,EAAE,MAAM,EAAE,GACd,4BAA4B,CAAC,CAAC,CAAC,GAAG,SAAS;IA+B9C,OAAO,CAAC,gBAAgB;IAcxB,OAAO,CAAC,aAAa;CAMtB"}

package/lib/typescript/module/src/modules/bt-management/services/devices/lepu/lepu.command-builder.d.ts

@@ -0,0 +1,24 @@
+/**
+ * Builds the commands a Lepu device accepts.
+ *
+ * Layout: `start | cmd | ~cmd | type | seq | lenLow lenHigh | payload | crc8`, the same frame
+ * the device answers with. The type byte is 0x00 on a request, and the checksum covers every
+ * byte before it.
+ *
+ * The sequence number is write-only bookkeeping: it wraps at 254 and nothing in the response
+ * path reads it back, so it cannot correlate a reply to its request. Correlation is by opcode,
+ * and the protocol relies on at most one command being outstanding - which is the constraint
+ * any sequencer built on this has to respect.
+ *
+ * The counter makes a builder stateful, so each connection needs its own. One builder shared
+ * across devices would interleave their sequence numbers, which is a defect the vendor's own
+ * global counter has and this avoids by construction.
+ */
+export declare class LepuCommandBuilder {
+    private readonly startByte;
+    private sequenceNumber;
+    constructor(startByte?: string);
+    build(command: number, payload?: readonly number[]): string[];
+    private advanceSequence;
+}
+//# sourceMappingURL=lepu.command-builder.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/devices/lepu/lepu.command-builder.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"lepu.command-builder.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/lepu/lepu.command-builder.ts"],"names":[],"mappings":"AAYA;;;;;;;;;;;;;;;GAeG;AACH,qBAAa,kBAAkB;IAGV,OAAO,CAAC,QAAQ,CAAC,SAAS;IAF7C,OAAO,CAAC,cAAc,CAAK;gBAES,SAAS,GAAE,MAAa;IAErD,KAAK,CAAC,OAAO,EAAE,MAAM,EAAE,OAAO,GAAE,SAAS,MAAM,EAAO,GAAG,MAAM,EAAE;IAkBxE,OAAO,CAAC,eAAe;CAIxB"}

package/lib/typescript/module/src/modules/bt-management/services/devices/lepu/lepu.commands.d.ts

@@ -0,0 +1,32 @@
+/**
+ * The commands every Lepu device understands.
+ *
+ * These are the generic opcodes, shared across the whole family. Device-specific opcodes live
+ * below 0x40 and belong with their driver, because the same number means different things on
+ * different hardware - 0x08 polls realtime data on a BP2 and starts a measurement on others.
+ * That collision is why this module holds only the opcodes that are genuinely common, and why
+ * a driver must never assume a low opcode is safe to send to an unidentified device.
+ */
+export declare const LepuCommand: {
+    /** Link keepalive and round-trip test. Inert. */
+    readonly ECHO: 224;
+    /**
+     * Device information, including the model string.
+     *
+     * Inert and identical family-wide, which makes it the one command safe to send before a
+     * device has been identified - and therefore the way to confirm what something is before
+     * addressing it with an opcode that means something else on the wrong hardware.
+     */
+    readonly GET_INFO: 225;
+    readonly GET_BATTERY: 228;
+    /** Enumerate the records stored on the device. */
+    readonly GET_FILE_LIST: 241;
+    /** Begin a read: a 20-byte payload of file name plus a 32-bit offset. */
+    readonly READ_FILE_START: 242;
+    /** Fetch the next chunk of the file being read. */
+    readonly READ_FILE_DATA: 243;
+    /** End the read and release the device's file handle. */
+    readonly READ_FILE_END: 244;
+};
+export type LepuCommandValue = (typeof LepuCommand)[keyof typeof LepuCommand];
+//# sourceMappingURL=lepu.commands.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/devices/lepu/lepu.commands.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"lepu.commands.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/lepu/lepu.commands.ts"],"names":[],"mappings":"AAAA;;;;;;;;GAQG;AACH,eAAO,MAAM,WAAW;IACtB,iDAAiD;;IAGjD;;;;;;OAMG;;;IAKH,kDAAkD;;IAGlD,yEAAyE;;IAGzE,mDAAmD;;IAGnD,yDAAyD;;CAEjD,CAAC;AAEX,MAAM,MAAM,gBAAgB,GAAG,CAAC,OAAO,WAAW,CAAC,CAAC,MAAM,OAAO,WAAW,CAAC,CAAC"}

package/lib/typescript/module/src/modules/bt-management/services/devices/lepu/lepu.device-info.d.ts

@@ -0,0 +1,27 @@
+/** What a Lepu device says it is, in answer to `GET_INFO`. */
+interface LepuDeviceInfo {
+    /** The model, as a number. What a driver checks before addressing the hardware. */
+    deviceType: number;
+    /** The largest payload the device will accept, which bounds a file read's chunks. */
+    protocolMaxLength: number;
+    branchCode: string;
+    serialNumber: string;
+}
+/**
+ * Reads the reply to `GET_INFO`, or nothing if the frame is not one.
+ *
+ * The command byte is checked rather than assumed, because this is the answer a driver
+ * decides its identity on: parsing some other frame as device info would produce a model
+ * number out of whatever bytes happened to sit at offset 20, and the gate would then pass
+ * on a coincidence.
+ *
+ * A frame too short to hold the layout is refused for the same reason, as is one whose
+ * response type is anything but success: an error reply carries a reason where the device
+ * information would be, and reading it as a model number would identify the hardware from
+ * an error code. The vendor's own struct is at least 56 bytes; anything shorter than the
+ * serial length field cannot be read without inventing the parts that are missing.
+ */
+declare const parseLepuDeviceInfo: (frame: readonly string[]) => LepuDeviceInfo | undefined;
+export { parseLepuDeviceInfo };
+export type { LepuDeviceInfo };
+//# sourceMappingURL=lepu.device-info.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/devices/lepu/lepu.device-info.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"lepu.device-info.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/lepu/lepu.device-info.ts"],"names":[],"mappings":"AAmDA,8DAA8D;AAC9D,UAAU,cAAc;IAEtB,mFAAmF;IACnF,UAAU,EAAE,MAAM,CAAC;IAEnB,qFAAqF;IACrF,iBAAiB,EAAE,MAAM,CAAC;IAE1B,UAAU,EAAE,MAAM,CAAC;IACnB,YAAY,EAAE,MAAM,CAAC;CACtB;AAED;;;;;;;;;;;;;GAaG;AACH,QAAA,MAAM,mBAAmB,GACvB,OAAO,SAAS,MAAM,EAAE,KACvB,cAAc,GAAG,SA0BnB,CAAC;AAEF,OAAO,EAAE,mBAAmB,EAAE,CAAC;AAC/B,YAAY,EAAE,cAAc,EAAE,CAAC"}

package/lib/typescript/module/src/modules/bt-management/services/devices/lepu/lepu.device-names.d.ts

@@ -0,0 +1,20 @@
+/**
+ * The names the Lepu/Viatom family advertises, as its own SDK matches them.
+ *
+ * Taken from the vendor's `getDeviceModel`, a 732-line cascade of substring checks that is
+ * the whole of how that SDK decides which product it is talking to. The order there matters,
+ * because 27 of these names are a prefix of another - `BP2` of `BP2A`, `BP2T`, `BP2W` and
+ * three more - so a check that ran in the wrong order would bind a BP2W as a BP2 and poll it
+ * with an opcode written for different hardware.
+ *
+ * It is that function's vocabulary, not a catalogue of everything the vendor sells: a few
+ * products - the ER3 and the M12 among them - are identified elsewhere in that app and never
+ * reach this list. `lepuNameMatch` accepts a name that is absent, and derives no exclusions
+ * for it, which is correct exactly when no name here extends it.
+ *
+ * They are held here as a flat vocabulary rather than an ordered cascade, because
+ * `lepuNameMatch` derives the exclusions from the list itself. Adding a name automatically
+ * narrows every name it extends, which an ordered list would leave to whoever inserted it.
+ */
+export declare const LEPU_DEVICE_NAMES: readonly string[];
+//# sourceMappingURL=lepu.device-names.d.ts.map