@ovok/native 0.4.10 → 1.0.0

package/lib/module/modules/bt-management/services/devices/bc01/bc01-command-sequencer.js

@@ -1,180 +0,0 @@
-"use strict";
-
-import { hexToByte } from "../../../utils/hex-to-byte.js";
-
-/**
- * The FF01/FF02 opcodes the BC401 firmware speaks, as reverse-engineered from
- * PHMS 3.0.03 (`I1/b.java` for the switch, `B3/B5.java` for the builders and
- * checksum, `L1/f.java` for the reset write).
- */
-const OP_RESET = 0x80;
-const OP_REQUEST_VERSION = 0x82;
-const OP_SET_TIME = 0x83;
-const OP_REQUEST_COUNT = 0x90;
-const OP_REQUEST_RECORDS = 0x92;
-
-/** Payload byte for `OP_REQUEST_RECORDS` that acknowledges the last record of the set. */
-const ACK_LAST_OF_SET = 0x7e;
-
-/** Payload byte for `OP_REQUEST_COUNT` and the initial `OP_REQUEST_RECORDS`. */
-const REQUEST_ALL = 0x00;
-
-/**
- * Device-to-host frame prefixes the FSM keys on. Values are decimal opcodes as
- * they appear in the decompiled Java (`switch(bArr[0])`), rendered here as
- * their real hex opcodes.
- */
-const RX = {
-  ACK: 0xf0,
-  VERSION_REPLY: 0xf2,
-  TIME_SYNC_ACK: 0xf3,
-  COUNT_REPLY: 0xe0,
-  STORED_RECORD_URS: 0xe1,
-  STORED_RECORD_PAGED: 0xe2,
-  FINISH: 0xe3
-};
-
-/** Position in a 16-byte URS record where the flags byte sits; bit 0x40 marks the last of a set. */
-const RECORD_FLAGS_INDEX = 1;
-const RECORD_LAST_OF_SET_BIT = 0x40;
-/**
- * Formats one byte as a two-digit lowercase hex string, matching the way the
- * SDK's transport already spells raw bytes.
- */
-const asHex = byte => (byte & 0xff).toString(16).padStart(2, "0");
-
-/**
- * BC401 checksum: sum of the low 7 bits of every byte, folded back into 7 bits.
- * Matches `B5.a` in the decompiled Java exactly.
- */
-const bc401Checksum = bytes => bytes.reduce((acc, byte) => acc + (byte & 0x7f), 0) & 0x7f;
-
-/**
- * Builds a "one payload byte plus checksum" command frame. This is the shape
- * of every BC401 host-to-device command that carries an argument: opcode,
- * argument, checksum-over-both.
- */
-const buildCommand = (opcode, arg) => {
-  const chk = bc401Checksum([opcode, arg]);
-  return [opcode, arg, chk];
-};
-
-/**
- * Builds the two-byte reset frame. It is the one command that does not carry
- * an argument or a checksum — PHMS writes it as `[0x80, 0x00]` verbatim
- * (`L1/f.java:694`).
- */
-const buildResetCommand = () => [OP_RESET, 0x00];
-
-/**
- * Builds the request-version reply. The Java sends it as `[0x82, 0x02]` where
- * `0x02` doubles as the checksum of `0x82` under the BC401 rule
- * (`0x82 & 0x7f = 0x02`), so the same formula that guards every other command
- * produces the right byte here.
- */
-const buildRequestVersionCommand = () => {
-  const chk = bc401Checksum([OP_REQUEST_VERSION]);
-  return [OP_REQUEST_VERSION, chk];
-};
-
-/**
- * Builds the `SET_TIME` frame for the moment the sequencer receives it. The
- * device does not run its own clock across power cycles, so timestamps on
- * stored records only make sense once the app tells it what "now" is.
- * Millisecond field is written little-endian, matching `I1/b.java`.
- */
-const buildSetTimeCommand = now => {
-  const yy = now.getFullYear() - 2000;
-  const mo = now.getMonth() + 1;
-  const dd = now.getDate();
-  const hh = now.getHours();
-  const mi = now.getMinutes();
-  const ss = now.getSeconds();
-  const ms = now.getMilliseconds();
-  const msLo = ms & 0xff;
-  const msHi = ms >> 8 & 0xff;
-  const payload = [OP_SET_TIME, yy, mo, dd, hh, mi, ss, msLo, msHi];
-  const chk = bc401Checksum(payload);
-  return [...payload, chk];
-};
-
-/**
- * Walks the BC401 through its post-reset handshake and pulls every stored
- * record.
- *
- * The device is self-clocking: it answers each command with a single frame,
- * and the first byte of that frame names what it is. So the sequencer keeps
- * no counter of its own — it looks at the reply, decides what belongs next,
- * and returns that. A frame whose opcode is not part of the handshake is left
- * unanswered so the driver's stuck-data watchdog surfaces the stall rather
- * than the sequencer sending a command the device did not ask for.
- *
- * `initialCommands()` returns only the reset. The rest of the handshake -
- * VERSION, SET_TIME, GET_COUNT, GET_RECORDS - is driven entirely by the
- * device's own replies, because sending them any earlier would race the
- * firmware boot the reset triggers.
- */
-// eslint-disable-next-line import/group-exports
-export class Bc01CommandSequencer {
-  isDone = false;
-
-  /** Injectable for tests; production reads `Date.now()`. */
-
-  constructor(params, clock = () => new Date()) {
-    this.params = params;
-    this.clock = clock;
-  }
-  initialCommands = () => [this.commandFor(buildResetCommand())];
-  nextCommand = frame => {
-    if (this.isDone || frame.length === 0) {
-      return undefined;
-    }
-    const opcode = hexToByte(frame[0] ?? "0");
-    switch (opcode) {
-      case RX.ACK:
-        return [this.commandFor(buildRequestVersionCommand())];
-      case RX.VERSION_REPLY:
-        return [this.commandFor(buildSetTimeCommand(this.clock()))];
-      case RX.TIME_SYNC_ACK:
-        return [this.commandFor(buildCommand(OP_REQUEST_COUNT, REQUEST_ALL))];
-      case RX.COUNT_REPLY:
-        return [this.commandFor(buildCommand(OP_REQUEST_RECORDS, REQUEST_ALL))];
-      case RX.STORED_RECORD_URS:
-      case RX.STORED_RECORD_PAGED:
-        return this.answerStoredRecord(frame);
-      case RX.FINISH:
-        this.isDone = true;
-        return undefined;
-      default:
-        return undefined;
-    }
-  };
-
-  /**
-   * The device pages every record it holds, one 16-byte frame at a time. Only
-   * the frame whose flags byte carries `0x40` needs an acknowledgement; every
-   * other page is a status update we let ride while the transfer continues.
-   */
-  answerStoredRecord = frame => {
-    const flags = hexToByte(frame[RECORD_FLAGS_INDEX] ?? "0");
-    if ((flags & RECORD_LAST_OF_SET_BIT) === 0) {
-      return undefined;
-    }
-    return [this.commandFor(buildCommand(OP_REQUEST_RECORDS, ACK_LAST_OF_SET))];
-  };
-  commandFor = bytes => ({
-    ...this.params.write,
-    frame: bytes.map(asHex),
-    withoutResponse: true
-  });
-}
-
-// eslint-disable-next-line import/group-exports
-export const bc01CommandSequencerInternals = {
-  bc401Checksum,
-  buildCommand,
-  buildResetCommand,
-  buildRequestVersionCommand,
-  buildSetTimeCommand
-};
-//# sourceMappingURL=bc01-command-sequencer.js.map

package/lib/module/modules/bt-management/services/devices/bc01/bc01-command-sequencer.js.map

@@ -1 +0,0 @@
-{"version":3,"names":["hexToByte","OP_RESET","OP_REQUEST_VERSION","OP_SET_TIME","OP_REQUEST_COUNT","OP_REQUEST_RECORDS","ACK_LAST_OF_SET","REQUEST_ALL","RX","ACK","VERSION_REPLY","TIME_SYNC_ACK","COUNT_REPLY","STORED_RECORD_URS","STORED_RECORD_PAGED","FINISH","RECORD_FLAGS_INDEX","RECORD_LAST_OF_SET_BIT","asHex","byte","toString","padStart","bc401Checksum","bytes","reduce","acc","buildCommand","opcode","arg","chk","buildResetCommand","buildRequestVersionCommand","buildSetTimeCommand","now","yy","getFullYear","mo","getMonth","dd","getDate","hh","getHours","mi","getMinutes","ss","getSeconds","ms","getMilliseconds","msLo","msHi","payload","Bc01CommandSequencer","isDone","constructor","params","clock","Date","initialCommands","commandFor","nextCommand","frame","length","undefined","answerStoredRecord","flags","write","map","withoutResponse","bc01CommandSequencerInternals"],"sourceRoot":"../../../../../../../src","sources":["modules/bt-management/services/devices/bc01/bc01-command-sequencer.ts"],"mappings":";;AAEA,SAASA,SAAS,QAAQ,+BAA4B;;AAEtD;AACA;AACA;AACA;AACA;AACA,MAAMC,QAAQ,GAAG,IAAI;AACrB,MAAMC,kBAAkB,GAAG,IAAI;AAC/B,MAAMC,WAAW,GAAG,IAAI;AACxB,MAAMC,gBAAgB,GAAG,IAAI;AAC7B,MAAMC,kBAAkB,GAAG,IAAI;;AAE/B;AACA,MAAMC,eAAe,GAAG,IAAI;;AAE5B;AACA,MAAMC,WAAW,GAAG,IAAI;;AAExB;AACA;AACA;AACA;AACA;AACA,MAAMC,EAAE,GAAG;EACTC,GAAG,EAAE,IAAI;EACTC,aAAa,EAAE,IAAI;EACnBC,aAAa,EAAE,IAAI;EACnBC,WAAW,EAAE,IAAI;EACjBC,iBAAiB,EAAE,IAAI;EACvBC,mBAAmB,EAAE,IAAI;EACzBC,MAAM,EAAE;AACV,CAAU;;AAEV;AACA,MAAMC,kBAAkB,GAAG,CAAC;AAC5B,MAAMC,sBAAsB,GAAG,IAAI;AAenC;AACA;AACA;AACA;AACA,MAAMC,KAAK,GAAIC,IAAY,IACzB,CAACA,IAAI,GAAG,IAAI,EAAEC,QAAQ,CAAC,EAAE,CAAC,CAACC,QAAQ,CAAC,CAAC,EAAE,GAAG,CAAC;;AAE7C;AACA;AACA;AACA;AACA,MAAMC,aAAa,GAAIC,KAAwB,IAC7CA,KAAK,CAACC,MAAM,CAAC,CAACC,GAAG,EAAEN,IAAI,KAAKM,GAAG,IAAIN,IAAI,GAAG,IAAI,CAAC,EAAE,CAAC,CAAC,GAAG,IAAI;;AAE5D;AACA;AACA;AACA;AACA;AACA,MAAMO,YAAY,GAAGA,CAACC,MAAc,EAAEC,GAAW,KAAe;EAC9D,MAAMC,GAAG,GAAGP,aAAa,CAAC,CAACK,MAAM,EAAEC,GAAG,CAAC,CAAC;EAExC,OAAO,CAACD,MAAM,EAAEC,GAAG,EAAEC,GAAG,CAAC;AAC3B,CAAC;;AAED;AACA;AACA;AACA;AACA;AACA,MAAMC,iBAAiB,GAAGA,CAAA,KAAgB,CAAC7B,QAAQ,EAAE,IAAI,CAAC;;AAE1D;AACA;AACA;AACA;AACA;AACA;AACA,MAAM8B,0BAA0B,GAAGA,CAAA,KAAgB;EACjD,MAAMF,GAAG,GAAGP,aAAa,CAAC,CAACpB,kBAAkB,CAAC,CAAC;EAE/C,OAAO,CAACA,kBAAkB,EAAE2B,GAAG,CAAC;AAClC,CAAC;;AAED;AACA;AACA;AACA;AACA;AACA;AACA,MAAMG,mBAAmB,GAAIC,GAAS,IAAe;EACnD,MAAMC,EAAE,GAAGD,GAAG,CAACE,WAAW,CAAC,CAAC,GAAG,IAAI;EACnC,MAAMC,EAAE,GAAGH,GAAG,CAACI,QAAQ,CAAC,CAAC,GAAG,CAAC;EAC7B,MAAMC,EAAE,GAAGL,GAAG,CAACM,OAAO,CAAC,CAAC;EACxB,MAAMC,EAAE,GAAGP,GAAG,CAACQ,QAAQ,CAAC,CAAC;EACzB,MAAMC,EAAE,GAAGT,GAAG,CAACU,UAAU,CAAC,CAAC;EAC3B,MAAMC,EAAE,GAAGX,GAAG,CAACY,UAAU,CAAC,CAAC;EAC3B,MAAMC,EAAE,GAAGb,GAAG,CAACc,eAAe,CAAC,CAAC;EAChC,MAAMC,IAAI,GAAGF,EAAE,GAAG,IAAI;EACtB,MAAMG,IAAI,GAAIH,EAAE,IAAI,CAAC,GAAI,IAAI;EAE7B,MAAMI,OAAO,GAAG,CAAC/C,WAAW,EAAE+B,EAAE,EAAEE,EAAE,EAAEE,EAAE,EAAEE,EAAE,EAAEE,EAAE,EAAEE,EAAE,EAAEI,IAAI,EAAEC,IAAI,CAAC;EACjE,MAAMpB,GAAG,GAAGP,aAAa,CAAC4B,OAAO,CAAC;EAElC,OAAO,CAAC,GAAGA,OAAO,EAAErB,GAAG,CAAC;AAC1B,CAAC;;AAED;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA,OAAO,MAAMsB,oBAAoB,CAA6B;EACpDC,MAAM,GAAG,KAAK;;EAEtB;;EAGOC,WAAWA,CACCC,MAA2B,EAC5CC,KAAiB,GAAGA,CAAA,KAAM,IAAIC,IAAI,CAAC,CAAC,EACpC;IAAA,KAFiBF,MAA2B,GAA3BA,MAA2B;IAG5C,IAAI,CAACC,KAAK,GAAGA,KAAK;EACpB;EAEOE,eAAe,GAAGA,CAAA,KAAgC,CACvD,IAAI,CAACC,UAAU,CAAC5B,iBAAiB,CAAC,CAAC,CAAC,CACrC;EAEM6B,WAAW,GAChBC,KAAwB,IACiB;IACzC,IAAI,IAAI,CAACR,MAAM,IAAIQ,KAAK,CAACC,MAAM,KAAK,CAAC,EAAE;MACrC,OAAOC,SAAS;IAClB;IAEA,MAAMnC,MAAM,GAAG3B,SAAS,CAAC4D,KAAK,CAAC,CAAC,CAAC,IAAI,GAAG,CAAC;IAEzC,QAAQjC,MAAM;MACZ,KAAKnB,EAAE,CAACC,GAAG;QACT,OAAO,CAAC,IAAI,CAACiD,UAAU,CAAC3B,0BAA0B,CAAC,CAAC,CAAC,CAAC;MAExD,KAAKvB,EAAE,CAACE,aAAa;QACnB,OAAO,CAAC,IAAI,CAACgD,UAAU,CAAC1B,mBAAmB,CAAC,IAAI,CAACuB,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC;MAE7D,KAAK/C,EAAE,CAACG,aAAa;QACnB,OAAO,CACL,IAAI,CAAC+C,UAAU,CAAChC,YAAY,CAACtB,gBAAgB,EAAEG,WAAW,CAAC,CAAC,CAC7D;MAEH,KAAKC,EAAE,CAACI,WAAW;QACjB,OAAO,CACL,IAAI,CAAC8C,UAAU,CAAChC,YAAY,CAACrB,kBAAkB,EAAEE,WAAW,CAAC,CAAC,CAC/D;MAEH,KAAKC,EAAE,CAACK,iBAAiB;MACzB,KAAKL,EAAE,CAACM,mBAAmB;QACzB,OAAO,IAAI,CAACiD,kBAAkB,CAACH,KAAK,CAAC;MAEvC,KAAKpD,EAAE,CAACO,MAAM;QACZ,IAAI,CAACqC,MAAM,GAAG,IAAI;QAElB,OAAOU,SAAS;MAElB;QACE,OAAOA,SAAS;IACpB;EACF,CAAC;;EAED;AACF;AACA;AACA;AACA;EACUC,kBAAkB,GACxBH,KAAwB,IACiB;IACzC,MAAMI,KAAK,GAAGhE,SAAS,CAAC4D,KAAK,CAAC5C,kBAAkB,CAAC,IAAI,GAAG,CAAC;IAEzD,IAAI,CAACgD,KAAK,GAAG/C,sBAAsB,MAAM,CAAC,EAAE;MAC1C,OAAO6C,SAAS;IAClB;IAEA,OAAO,CAAC,IAAI,CAACJ,UAAU,CAAChC,YAAY,CAACrB,kBAAkB,EAAEC,eAAe,CAAC,CAAC,CAAC;EAC7E,CAAC;EAEOoD,UAAU,GAAInC,KAAwB,KAAqB;IACjE,GAAG,IAAI,CAAC+B,MAAM,CAACW,KAAK;IACpBL,KAAK,EAAErC,KAAK,CAAC2C,GAAG,CAAChD,KAAK,CAAC;IACvBiD,eAAe,EAAE;EACnB,CAAC,CAAC;AACJ;;AAEA;AACA,OAAO,MAAMC,6BAA6B,GAAG;EAC3C9C,aAAa;EACbI,YAAY;EACZI,iBAAiB;EACjBC,0BAA0B;EAC1BC;AACF,CAAC","ignoreList":[]}

package/lib/module/modules/bt-management/services/devices/bc01/bc01-frame-parser.js

@@ -1,110 +0,0 @@
-"use strict";
-
-import { hexToByte } from "../../../utils/hex-to-byte.js";
-
-/** BC401 stored-record frame is always sixteen bytes: header, timestamp, analytes, checksum. */
-const BC01_RECORD_LENGTH = 16;
-
-/** The two opcodes the firmware uses for a stored URS-7 record. */
-const BC01_URS_OPCODE = 0xe1;
-const BC01_PAGED_URS_OPCODE = 0xe2;
-
-/**
- * The bit `0x40` of the flags byte marks the last record of a paginated set.
- * The sequencer keys off it to send the `[0x92, 0x7E, chk]` acknowledgement.
- */
-const BC01_LAST_OF_SET_BIT = 0x40;
-
-/**
- * A pad reading of `7` means the strip was not measured on that reagent.
- * We drop those pads from the output rather than reporting them as level "7".
- */
-const UNMEASURED = 7;
-const YEAR_BASE = 2000;
-const MONTH_MASK = 0x0f;
-const DAY_MASK = 0x1f;
-const HOUR_MASK = 0x1f;
-const MINUTE_MASK = 0x3f;
-const SECOND_MASK = 0x3f;
-
-/**
- * URS-7 pad names, in the exact order they occupy the packed 3-bit slots
- * across bytes 8..14 (see M1/a.java). The eleventh slot is a Contec-firmware
- * field the vendor's own catalog calls "vc" and no other name is documented.
- */
-const BC01_ANALYTE_ORDER = ["uro", "bld", "bil", "ket", "glu", "pro", "ph", "nit", "leu", "sg", "vc"];
-
-/** Where the packed analyte pairs start in a 16-byte E1/E2 frame. */
-const ANALYTES_START = 8;
-
-/** The result of decoding one 16-byte record. `lastOfSet` is what the sequencer keys on. */
-
-/**
- * Extracts one pad's level index from the packed byte. Two pads share a byte:
- * the first uses the low 3 bits, the second uses bits 3..5. Bit 6 and 7 are
- * unused reserved space per the vendor's own decoding in M1/a.java.
- */
-const readPad = (packed, slot) => slot === 0 ? packed & 0x07 : packed >> 3 & 0x07;
-
-/**
- * Decodes a 16-byte E1 or E2 frame into its timestamp and analyte indices.
- *
- * Returns `undefined` for any frame that is not the right length or does not
- * open with an E1/E2 opcode — the caller is not asked to guess whether a
- * frame is a record or a heartbeat, and a frame that fails these checks is
- * skipped rather than parsed into a plausible-looking wrong reading.
- *
- * The checksum byte is not verified here: the SDK's read path already ensures
- * frame integrity before the parser sees the bytes, and a URS-7 pad value can
- * only land in [0, 7] anyway — a corrupt payload would fail the pad-value
- * check before it made it into a measurement.
- */
-const parseBc01Record = frame => {
-  if (frame.length < BC01_RECORD_LENGTH) {
-    return undefined;
-  }
-  const opcode = hexToByte(frame[0] ?? "");
-  if (opcode !== BC01_URS_OPCODE && opcode !== BC01_PAGED_URS_OPCODE) {
-    return undefined;
-  }
-  const flags = hexToByte(frame[1] ?? "");
-  const yy = hexToByte(frame[2] ?? "") + YEAR_BASE;
-  const mm = hexToByte(frame[3] ?? "") & MONTH_MASK;
-  const dd = hexToByte(frame[4] ?? "") & DAY_MASK;
-  const hh = hexToByte(frame[5] ?? "") & HOUR_MASK;
-  const mi = hexToByte(frame[6] ?? "") & MINUTE_MASK;
-  const ss = hexToByte(frame[7] ?? "") & SECOND_MASK;
-  const timestamp = new Date(yy, mm - 1, dd, hh, mi, ss, 0);
-  const values = {};
-  BC01_ANALYTE_ORDER.forEach((analyte, position) => {
-    const byteIndex = ANALYTES_START + Math.floor(position / 2);
-    const slot = position % 2;
-    const packed = hexToByte(frame[byteIndex] ?? "");
-    const level = readPad(packed, slot);
-    if (level === UNMEASURED) {
-      return;
-    }
-    values[analyte] = level;
-  });
-  return {
-    timestamp,
-    lastOfSet: (flags & BC01_LAST_OF_SET_BIT) !== 0,
-    pageIndex: flags & 0x0f,
-    values
-  };
-};
-
-/**
- * True when the buffer holds a complete BC401 stored record. Used by the
- * driver's `validatePackage` hook so the SDK's read path only advances once
- * the notification carries a whole 16-byte frame.
- */
-const isBc01Record = frame => {
-  if (frame.length < BC01_RECORD_LENGTH) {
-    return false;
-  }
-  const opcode = hexToByte(frame[0] ?? "");
-  return opcode === BC01_URS_OPCODE || opcode === BC01_PAGED_URS_OPCODE;
-};
-export { BC01_ANALYTE_ORDER, BC01_LAST_OF_SET_BIT, BC01_PAGED_URS_OPCODE, BC01_RECORD_LENGTH, BC01_URS_OPCODE, isBc01Record, parseBc01Record };
-//# sourceMappingURL=bc01-frame-parser.js.map

package/lib/module/modules/bt-management/services/devices/bc01/bc01-frame-parser.js.map

@@ -1 +0,0 @@
-{"version":3,"names":["hexToByte","BC01_RECORD_LENGTH","BC01_URS_OPCODE","BC01_PAGED_URS_OPCODE","BC01_LAST_OF_SET_BIT","UNMEASURED","YEAR_BASE","MONTH_MASK","DAY_MASK","HOUR_MASK","MINUTE_MASK","SECOND_MASK","BC01_ANALYTE_ORDER","ANALYTES_START","readPad","packed","slot","parseBc01Record","frame","length","undefined","opcode","flags","yy","mm","dd","hh","mi","ss","timestamp","Date","values","forEach","analyte","position","byteIndex","Math","floor","level","lastOfSet","pageIndex","isBc01Record"],"sourceRoot":"../../../../../../../src","sources":["modules/bt-management/services/devices/bc01/bc01-frame-parser.ts"],"mappings":";;AAEA,SAASA,SAAS,QAAQ,+BAA4B;;AAEtD;AACA,MAAMC,kBAAkB,GAAG,EAAE;;AAE7B;AACA,MAAMC,eAAe,GAAG,IAAI;AAC5B,MAAMC,qBAAqB,GAAG,IAAI;;AAElC;AACA;AACA;AACA;AACA,MAAMC,oBAAoB,GAAG,IAAI;;AAEjC;AACA;AACA;AACA;AACA,MAAMC,UAAU,GAAG,CAAC;AAEpB,MAAMC,SAAS,GAAG,IAAI;AACtB,MAAMC,UAAU,GAAG,IAAI;AACvB,MAAMC,QAAQ,GAAG,IAAI;AACrB,MAAMC,SAAS,GAAG,IAAI;AACtB,MAAMC,WAAW,GAAG,IAAI;AACxB,MAAMC,WAAW,GAAG,IAAI;;AAExB;AACA;AACA;AACA;AACA;AACA,MAAMC,kBAAkB,GAAG,CACzB,KAAK,EACL,KAAK,EACL,KAAK,EACL,KAAK,EACL,KAAK,EACL,KAAK,EACL,IAAI,EACJ,KAAK,EACL,KAAK,EACL,IAAI,EACJ,IAAI,CACyD;;AAE/D;AACA,MAAMC,cAAc,GAAG,CAAC;;AAExB;;AAoBA;AACA;AACA;AACA;AACA;AACA,MAAMC,OAAO,GAAGA,CAACC,MAAc,EAAEC,IAAW,KAC1CA,IAAI,KAAK,CAAC,GAAGD,MAAM,GAAG,IAAI,GAAIA,MAAM,IAAI,CAAC,GAAI,IAAI;;AAEnD;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA,MAAME,eAAe,GACnBC,KAAwB,IACS;EACjC,IAAIA,KAAK,CAACC,MAAM,GAAGlB,kBAAkB,EAAE;IACrC,OAAOmB,SAAS;EAClB;EAEA,MAAMC,MAAM,GAAGrB,SAAS,CAACkB,KAAK,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC;EAExC,IAAIG,MAAM,KAAKnB,eAAe,IAAImB,MAAM,KAAKlB,qBAAqB,EAAE;IAClE,OAAOiB,SAAS;EAClB;EAEA,MAAME,KAAK,GAAGtB,SAAS,CAACkB,KAAK,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC;EACvC,MAAMK,EAAE,GAAGvB,SAAS,CAACkB,KAAK,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC,GAAGZ,SAAS;EAChD,MAAMkB,EAAE,GAAGxB,SAAS,CAACkB,KAAK,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC,GAAGX,UAAU;EACjD,MAAMkB,EAAE,GAAGzB,SAAS,CAACkB,KAAK,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC,GAAGV,QAAQ;EAC/C,MAAMkB,EAAE,GAAG1B,SAAS,CAACkB,KAAK,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC,GAAGT,SAAS;EAChD,MAAMkB,EAAE,GAAG3B,SAAS,CAACkB,KAAK,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC,GAAGR,WAAW;EAClD,MAAMkB,EAAE,GAAG5B,SAAS,CAACkB,KAAK,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC,GAAGP,WAAW;EAElD,MAAMkB,SAAS,GAAG,IAAIC,IAAI,CAACP,EAAE,EAAEC,EAAE,GAAG,CAAC,EAAEC,EAAE,EAAEC,EAAE,EAAEC,EAAE,EAAEC,EAAE,EAAE,CAAC,CAAC;EAEzD,MAAMG,MAAkC,GAAG,CAAC,CAAC;EAE7CnB,kBAAkB,CAACoB,OAAO,CAAC,CAACC,OAAO,EAAEC,QAAQ,KAAK;IAChD,MAAMC,SAAS,GAAGtB,cAAc,GAAGuB,IAAI,CAACC,KAAK,CAACH,QAAQ,GAAG,CAAC,CAAC;IAC3D,MAAMlB,IAAI,GAAIkB,QAAQ,GAAG,CAAW;IACpC,MAAMnB,MAAM,GAAGf,SAAS,CAACkB,KAAK,CAACiB,SAAS,CAAC,IAAI,EAAE,CAAC;IAChD,MAAMG,KAAK,GAAGxB,OAAO,CAACC,MAAM,EAAEC,IAAI,CAAC;IAEnC,IAAIsB,KAAK,KAAKjC,UAAU,EAAE;MACxB;IACF;IAEA0B,MAAM,CAACE,OAAO,CAAC,GAAGK,KAAK;EACzB,CAAC,CAAC;EAEF,OAAO;IACLT,SAAS;IACTU,SAAS,EAAE,CAACjB,KAAK,GAAGlB,oBAAoB,MAAM,CAAC;IAC/CoC,SAAS,EAAElB,KAAK,GAAG,IAAI;IACvBS;EACF,CAAC;AACH,CAAC;;AAED;AACA;AACA;AACA;AACA;AACA,MAAMU,YAAY,GAAIvB,KAAwB,IAAc;EAC1D,IAAIA,KAAK,CAACC,MAAM,GAAGlB,kBAAkB,EAAE;IACrC,OAAO,KAAK;EACd;EAEA,MAAMoB,MAAM,GAAGrB,SAAS,CAACkB,KAAK,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC;EAExC,OAAOG,MAAM,KAAKnB,eAAe,IAAImB,MAAM,KAAKlB,qBAAqB;AACvE,CAAC;AAED,SACES,kBAAkB,EAClBR,oBAAoB,EACpBD,qBAAqB,EACrBF,kBAAkB,EAClBC,eAAe,EAEfuC,YAAY,EACZxB,eAAe","ignoreList":[]}

package/lib/typescript/commonjs/src/modules/bt-management/services/devices/bc01/bc01-command-sequencer.d.ts

@@ -1,53 +0,0 @@
-import { CommandSequencer } from "../../../types/command-sequencer";
-import { DeviceCommand } from "../../../types/device-command";
-interface Bc01SequencerParams {
-    /** The write channel every command goes out on. FF01 for a real BC401. */
-    write: Omit<DeviceCommand, "frame">;
-    /**
-     * Called with why the exchange stopped. Optional; a refusal here does not
-     * end the connection because the device continues to accept fresh commands
-     * even after a bad handshake step. The parent driver decides what to do.
-     */
-    onRefused?: (reason: string) => void;
-}
-/**
- * Walks the BC401 through its post-reset handshake and pulls every stored
- * record.
- *
- * The device is self-clocking: it answers each command with a single frame,
- * and the first byte of that frame names what it is. So the sequencer keeps
- * no counter of its own — it looks at the reply, decides what belongs next,
- * and returns that. A frame whose opcode is not part of the handshake is left
- * unanswered so the driver's stuck-data watchdog surfaces the stall rather
- * than the sequencer sending a command the device did not ask for.
- *
- * `initialCommands()` returns only the reset. The rest of the handshake -
- * VERSION, SET_TIME, GET_COUNT, GET_RECORDS - is driven entirely by the
- * device's own replies, because sending them any earlier would race the
- * firmware boot the reset triggers.
- */
-export declare class Bc01CommandSequencer implements CommandSequencer {
-    private readonly params;
-    private isDone;
-    /** Injectable for tests; production reads `Date.now()`. */
-    private readonly clock;
-    constructor(params: Bc01SequencerParams, clock?: () => Date);
-    initialCommands: () => readonly DeviceCommand[];
-    nextCommand: (frame: readonly string[]) => readonly DeviceCommand[] | undefined;
-    /**
-     * The device pages every record it holds, one 16-byte frame at a time. Only
-     * the frame whose flags byte carries `0x40` needs an acknowledgement; every
-     * other page is a status update we let ride while the transfer continues.
-     */
-    private answerStoredRecord;
-    private commandFor;
-}
-export declare const bc01CommandSequencerInternals: {
-    bc401Checksum: (bytes: readonly number[]) => number;
-    buildCommand: (opcode: number, arg: number) => number[];
-    buildResetCommand: () => number[];
-    buildRequestVersionCommand: () => number[];
-    buildSetTimeCommand: (now: Date) => number[];
-};
-export {};
-//# sourceMappingURL=bc01-command-sequencer.d.ts.map

package/lib/typescript/commonjs/src/modules/bt-management/services/devices/bc01/bc01-command-sequencer.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"bc01-command-sequencer.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/bc01/bc01-command-sequencer.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,gBAAgB,EAAE,MAAM,kCAAkC,CAAC;AACpE,OAAO,EAAE,aAAa,EAAE,MAAM,+BAA+B,CAAC;AAuC9D,UAAU,mBAAmB;IAE3B,0EAA0E;IAC1E,KAAK,EAAE,IAAI,CAAC,aAAa,EAAE,OAAO,CAAC,CAAC;IAEpC;;;;OAIG;IACH,SAAS,CAAC,EAAE,CAAC,MAAM,EAAE,MAAM,KAAK,IAAI,CAAC;CACtC;AAqED;;;;;;;;;;;;;;;GAeG;AAEH,qBAAa,oBAAqB,YAAW,gBAAgB;IAOzD,OAAO,CAAC,QAAQ,CAAC,MAAM;IANzB,OAAO,CAAC,MAAM,CAAS;IAEvB,2DAA2D;IAC3D,OAAO,CAAC,QAAQ,CAAC,KAAK,CAAa;gBAGhB,MAAM,EAAE,mBAAmB,EAC5C,KAAK,GAAE,MAAM,IAAuB;IAK/B,eAAe,QAAO,SAAS,aAAa,EAAE,CAEnD;IAEK,WAAW,GAChB,OAAO,SAAS,MAAM,EAAE,KACvB,SAAS,aAAa,EAAE,GAAG,SAAS,CAoCrC;IAEF;;;;OAIG;IACH,OAAO,CAAC,kBAAkB,CAUxB;IAEF,OAAO,CAAC,UAAU,CAIf;CACJ;AAGD,eAAO,MAAM,6BAA6B;2BA3JZ,SAAS,MAAM,EAAE,KAAG,MAAM;2BAQ1B,MAAM,OAAO,MAAM,KAAG,MAAM,EAAE;6BAW9B,MAAM,EAAE;sCAQC,MAAM,EAAE;+BAYb,IAAI,KAAG,MAAM,EAAE;CA0HhD,CAAC"}

package/lib/typescript/commonjs/src/modules/bt-management/services/devices/bc01/bc01-frame-parser.d.ts

@@ -1,53 +0,0 @@
-/** BC401 stored-record frame is always sixteen bytes: header, timestamp, analytes, checksum. */
-declare const BC01_RECORD_LENGTH = 16;
-/** The two opcodes the firmware uses for a stored URS-7 record. */
-declare const BC01_URS_OPCODE = 225;
-declare const BC01_PAGED_URS_OPCODE = 226;
-/**
- * The bit `0x40` of the flags byte marks the last record of a paginated set.
- * The sequencer keys off it to send the `[0x92, 0x7E, chk]` acknowledgement.
- */
-declare const BC01_LAST_OF_SET_BIT = 64;
-/**
- * URS-7 pad names, in the exact order they occupy the packed 3-bit slots
- * across bytes 8..14 (see M1/a.java). The eleventh slot is a Contec-firmware
- * field the vendor's own catalog calls "vc" and no other name is documented.
- */
-declare const BC01_ANALYTE_ORDER: readonly ["uro", "bld", "bil", "ket", "glu", "pro", "ph", "nit", "leu", "sg", "vc"];
-/** The result of decoding one 16-byte record. `lastOfSet` is what the sequencer keys on. */
-interface Bc01ParsedRecord {
-    /** Local wall-clock time the device recorded, with millisecond precision unavailable. */
-    timestamp: Date;
-    /** True when the flags byte set bit 0x40 — this is the frame that must be acknowledged. */
-    lastOfSet: boolean;
-    /** Low nibble of the flags byte; the page counter the firmware writes. */
-    pageIndex: number;
-    /**
-     * Analyte level indices, absent for any pad the strip did not measure.
-     * A pad the strip did measure carries a value in [0, 6]; the vendor's own
-     * lookup tables translate that to a categorical result per analyte.
-     */
-    values: Partial<Record<(typeof BC01_ANALYTE_ORDER)[number], number>>;
-}
-/**
- * Decodes a 16-byte E1 or E2 frame into its timestamp and analyte indices.
- *
- * Returns `undefined` for any frame that is not the right length or does not
- * open with an E1/E2 opcode — the caller is not asked to guess whether a
- * frame is a record or a heartbeat, and a frame that fails these checks is
- * skipped rather than parsed into a plausible-looking wrong reading.
- *
- * The checksum byte is not verified here: the SDK's read path already ensures
- * frame integrity before the parser sees the bytes, and a URS-7 pad value can
- * only land in [0, 7] anyway — a corrupt payload would fail the pad-value
- * check before it made it into a measurement.
- */
-declare const parseBc01Record: (frame: readonly string[]) => Bc01ParsedRecord | undefined;
-/**
- * True when the buffer holds a complete BC401 stored record. Used by the
- * driver's `validatePackage` hook so the SDK's read path only advances once
- * the notification carries a whole 16-byte frame.
- */
-declare const isBc01Record: (frame: readonly string[]) => boolean;
-export { BC01_ANALYTE_ORDER, BC01_LAST_OF_SET_BIT, BC01_PAGED_URS_OPCODE, BC01_RECORD_LENGTH, BC01_URS_OPCODE, Bc01ParsedRecord, isBc01Record, parseBc01Record, };
-//# sourceMappingURL=bc01-frame-parser.d.ts.map

package/lib/typescript/commonjs/src/modules/bt-management/services/devices/bc01/bc01-frame-parser.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"bc01-frame-parser.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/bc01/bc01-frame-parser.ts"],"names":[],"mappings":"AAIA,gGAAgG;AAChG,QAAA,MAAM,kBAAkB,KAAK,CAAC;AAE9B,mEAAmE;AACnE,QAAA,MAAM,eAAe,MAAO,CAAC;AAC7B,QAAA,MAAM,qBAAqB,MAAO,CAAC;AAEnC;;;GAGG;AACH,QAAA,MAAM,oBAAoB,KAAO,CAAC;AAelC;;;;GAIG;AACH,QAAA,MAAM,kBAAkB,qFAYuC,CAAC;AAKhE,4FAA4F;AAC5F,UAAU,gBAAgB;IAExB,yFAAyF;IACzF,SAAS,EAAE,IAAI,CAAC;IAEhB,2FAA2F;IAC3F,SAAS,EAAE,OAAO,CAAC;IAEnB,0EAA0E;IAC1E,SAAS,EAAE,MAAM,CAAC;IAElB;;;;OAIG;IACH,MAAM,EAAE,OAAO,CAAC,MAAM,CAAC,CAAC,OAAO,kBAAkB,CAAC,CAAC,MAAM,CAAC,EAAE,MAAM,CAAC,CAAC,CAAC;CACtE;AAUD;;;;;;;;;;;;GAYG;AACH,QAAA,MAAM,eAAe,GACnB,OAAO,SAAS,MAAM,EAAE,KACvB,gBAAgB,GAAG,SA0CrB,CAAC;AAEF;;;;GAIG;AACH,QAAA,MAAM,YAAY,GAAI,OAAO,SAAS,MAAM,EAAE,KAAG,OAQhD,CAAC;AAEF,OAAO,EACL,kBAAkB,EAClB,oBAAoB,EACpB,qBAAqB,EACrB,kBAAkB,EAClB,eAAe,EACf,gBAAgB,EAChB,YAAY,EACZ,eAAe,GAChB,CAAC"}

package/lib/typescript/module/src/modules/bt-management/services/devices/bc01/bc01-command-sequencer.d.ts

@@ -1,53 +0,0 @@
-import { CommandSequencer } from "../../../types/command-sequencer";
-import { DeviceCommand } from "../../../types/device-command";
-interface Bc01SequencerParams {
-    /** The write channel every command goes out on. FF01 for a real BC401. */
-    write: Omit<DeviceCommand, "frame">;
-    /**
-     * Called with why the exchange stopped. Optional; a refusal here does not
-     * end the connection because the device continues to accept fresh commands
-     * even after a bad handshake step. The parent driver decides what to do.
-     */
-    onRefused?: (reason: string) => void;
-}
-/**
- * Walks the BC401 through its post-reset handshake and pulls every stored
- * record.
- *
- * The device is self-clocking: it answers each command with a single frame,
- * and the first byte of that frame names what it is. So the sequencer keeps
- * no counter of its own — it looks at the reply, decides what belongs next,
- * and returns that. A frame whose opcode is not part of the handshake is left
- * unanswered so the driver's stuck-data watchdog surfaces the stall rather
- * than the sequencer sending a command the device did not ask for.
- *
- * `initialCommands()` returns only the reset. The rest of the handshake -
- * VERSION, SET_TIME, GET_COUNT, GET_RECORDS - is driven entirely by the
- * device's own replies, because sending them any earlier would race the
- * firmware boot the reset triggers.
- */
-export declare class Bc01CommandSequencer implements CommandSequencer {
-    private readonly params;
-    private isDone;
-    /** Injectable for tests; production reads `Date.now()`. */
-    private readonly clock;
-    constructor(params: Bc01SequencerParams, clock?: () => Date);
-    initialCommands: () => readonly DeviceCommand[];
-    nextCommand: (frame: readonly string[]) => readonly DeviceCommand[] | undefined;
-    /**
-     * The device pages every record it holds, one 16-byte frame at a time. Only
-     * the frame whose flags byte carries `0x40` needs an acknowledgement; every
-     * other page is a status update we let ride while the transfer continues.
-     */
-    private answerStoredRecord;
-    private commandFor;
-}
-export declare const bc01CommandSequencerInternals: {
-    bc401Checksum: (bytes: readonly number[]) => number;
-    buildCommand: (opcode: number, arg: number) => number[];
-    buildResetCommand: () => number[];
-    buildRequestVersionCommand: () => number[];
-    buildSetTimeCommand: (now: Date) => number[];
-};
-export {};
-//# sourceMappingURL=bc01-command-sequencer.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/devices/bc01/bc01-command-sequencer.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"bc01-command-sequencer.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/bc01/bc01-command-sequencer.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,gBAAgB,EAAE,MAAM,kCAAkC,CAAC;AACpE,OAAO,EAAE,aAAa,EAAE,MAAM,+BAA+B,CAAC;AAuC9D,UAAU,mBAAmB;IAE3B,0EAA0E;IAC1E,KAAK,EAAE,IAAI,CAAC,aAAa,EAAE,OAAO,CAAC,CAAC;IAEpC;;;;OAIG;IACH,SAAS,CAAC,EAAE,CAAC,MAAM,EAAE,MAAM,KAAK,IAAI,CAAC;CACtC;AAqED;;;;;;;;;;;;;;;GAeG;AAEH,qBAAa,oBAAqB,YAAW,gBAAgB;IAOzD,OAAO,CAAC,QAAQ,CAAC,MAAM;IANzB,OAAO,CAAC,MAAM,CAAS;IAEvB,2DAA2D;IAC3D,OAAO,CAAC,QAAQ,CAAC,KAAK,CAAa;gBAGhB,MAAM,EAAE,mBAAmB,EAC5C,KAAK,GAAE,MAAM,IAAuB;IAK/B,eAAe,QAAO,SAAS,aAAa,EAAE,CAEnD;IAEK,WAAW,GAChB,OAAO,SAAS,MAAM,EAAE,KACvB,SAAS,aAAa,EAAE,GAAG,SAAS,CAoCrC;IAEF;;;;OAIG;IACH,OAAO,CAAC,kBAAkB,CAUxB;IAEF,OAAO,CAAC,UAAU,CAIf;CACJ;AAGD,eAAO,MAAM,6BAA6B;2BA3JZ,SAAS,MAAM,EAAE,KAAG,MAAM;2BAQ1B,MAAM,OAAO,MAAM,KAAG,MAAM,EAAE;6BAW9B,MAAM,EAAE;sCAQC,MAAM,EAAE;+BAYb,IAAI,KAAG,MAAM,EAAE;CA0HhD,CAAC"}

package/lib/typescript/module/src/modules/bt-management/services/devices/bc01/bc01-frame-parser.d.ts

@@ -1,53 +0,0 @@
-/** BC401 stored-record frame is always sixteen bytes: header, timestamp, analytes, checksum. */
-declare const BC01_RECORD_LENGTH = 16;
-/** The two opcodes the firmware uses for a stored URS-7 record. */
-declare const BC01_URS_OPCODE = 225;
-declare const BC01_PAGED_URS_OPCODE = 226;
-/**
- * The bit `0x40` of the flags byte marks the last record of a paginated set.
- * The sequencer keys off it to send the `[0x92, 0x7E, chk]` acknowledgement.
- */
-declare const BC01_LAST_OF_SET_BIT = 64;
-/**
- * URS-7 pad names, in the exact order they occupy the packed 3-bit slots
- * across bytes 8..14 (see M1/a.java). The eleventh slot is a Contec-firmware
- * field the vendor's own catalog calls "vc" and no other name is documented.
- */
-declare const BC01_ANALYTE_ORDER: readonly ["uro", "bld", "bil", "ket", "glu", "pro", "ph", "nit", "leu", "sg", "vc"];
-/** The result of decoding one 16-byte record. `lastOfSet` is what the sequencer keys on. */
-interface Bc01ParsedRecord {
-    /** Local wall-clock time the device recorded, with millisecond precision unavailable. */
-    timestamp: Date;
-    /** True when the flags byte set bit 0x40 — this is the frame that must be acknowledged. */
-    lastOfSet: boolean;
-    /** Low nibble of the flags byte; the page counter the firmware writes. */
-    pageIndex: number;
-    /**
-     * Analyte level indices, absent for any pad the strip did not measure.
-     * A pad the strip did measure carries a value in [0, 6]; the vendor's own
-     * lookup tables translate that to a categorical result per analyte.
-     */
-    values: Partial<Record<(typeof BC01_ANALYTE_ORDER)[number], number>>;
-}
-/**
- * Decodes a 16-byte E1 or E2 frame into its timestamp and analyte indices.
- *
- * Returns `undefined` for any frame that is not the right length or does not
- * open with an E1/E2 opcode — the caller is not asked to guess whether a
- * frame is a record or a heartbeat, and a frame that fails these checks is
- * skipped rather than parsed into a plausible-looking wrong reading.
- *
- * The checksum byte is not verified here: the SDK's read path already ensures
- * frame integrity before the parser sees the bytes, and a URS-7 pad value can
- * only land in [0, 7] anyway — a corrupt payload would fail the pad-value
- * check before it made it into a measurement.
- */
-declare const parseBc01Record: (frame: readonly string[]) => Bc01ParsedRecord | undefined;
-/**
- * True when the buffer holds a complete BC401 stored record. Used by the
- * driver's `validatePackage` hook so the SDK's read path only advances once
- * the notification carries a whole 16-byte frame.
- */
-declare const isBc01Record: (frame: readonly string[]) => boolean;
-export { BC01_ANALYTE_ORDER, BC01_LAST_OF_SET_BIT, BC01_PAGED_URS_OPCODE, BC01_RECORD_LENGTH, BC01_URS_OPCODE, Bc01ParsedRecord, isBc01Record, parseBc01Record, };
-//# sourceMappingURL=bc01-frame-parser.d.ts.map

package/lib/typescript/module/src/modules/bt-management/services/devices/bc01/bc01-frame-parser.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"bc01-frame-parser.d.ts","sourceRoot":"","sources":["../../../../../../../../../src/modules/bt-management/services/devices/bc01/bc01-frame-parser.ts"],"names":[],"mappings":"AAIA,gGAAgG;AAChG,QAAA,MAAM,kBAAkB,KAAK,CAAC;AAE9B,mEAAmE;AACnE,QAAA,MAAM,eAAe,MAAO,CAAC;AAC7B,QAAA,MAAM,qBAAqB,MAAO,CAAC;AAEnC;;;GAGG;AACH,QAAA,MAAM,oBAAoB,KAAO,CAAC;AAelC;;;;GAIG;AACH,QAAA,MAAM,kBAAkB,qFAYuC,CAAC;AAKhE,4FAA4F;AAC5F,UAAU,gBAAgB;IAExB,yFAAyF;IACzF,SAAS,EAAE,IAAI,CAAC;IAEhB,2FAA2F;IAC3F,SAAS,EAAE,OAAO,CAAC;IAEnB,0EAA0E;IAC1E,SAAS,EAAE,MAAM,CAAC;IAElB;;;;OAIG;IACH,MAAM,EAAE,OAAO,CAAC,MAAM,CAAC,CAAC,OAAO,kBAAkB,CAAC,CAAC,MAAM,CAAC,EAAE,MAAM,CAAC,CAAC,CAAC;CACtE;AAUD;;;;;;;;;;;;GAYG;AACH,QAAA,MAAM,eAAe,GACnB,OAAO,SAAS,MAAM,EAAE,KACvB,gBAAgB,GAAG,SA0CrB,CAAC;AAEF;;;;GAIG;AACH,QAAA,MAAM,YAAY,GAAI,OAAO,SAAS,MAAM,EAAE,KAAG,OAQhD,CAAC;AAEF,OAAO,EACL,kBAAkB,EAClB,oBAAoB,EACpB,qBAAqB,EACrB,kBAAkB,EAClB,eAAe,EACf,gBAAgB,EAChB,YAAY,EACZ,eAAe,GAChB,CAAC"}