@ourskyai/sda-api 1.3.8639 → 1.3.8815

package/README.md

@@ -1,4 +1,4 @@
-## @ourskyai/sda-api@1.3.8639
+## @ourskyai/sda-api@1.3.8815
 
 This generator creates TypeScript/JavaScript client that utilizes [axios](https://github.com/axios/axios). The generated Node module can be used in the following environments:
 
@@ -36,7 +36,7 @@ navigate to the folder of your consuming project and run one of the following co
 _published:_
 
 ```
-npm install @ourskyai/sda-api@1.3.8639 --save
+npm install @ourskyai/sda-api@1.3.8815 --save
 ```
 
 _unPublished (not recommended):_

package/api.ts

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  * 
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -1032,6 +1032,44 @@ export interface V1ImageMetadata {
      */
     'createdAt': string;
 }
+/**
+ * 
+ * @export
+ * @enum {string}
+ */
+
+export const V1ImageRejectionReason = {
+    TARGET_NOT_FOUND: 'TARGET_NOT_FOUND',
+    RATE_TARGET_NOT_FOUND: 'RATE_TARGET_NOT_FOUND',
+    RATE_PLATE_SOLVE_FAILURE: 'RATE_PLATE_SOLVE_FAILURE',
+    STREAK_DETECTION_FAILURE: 'STREAK_DETECTION_FAILURE',
+    PLATE_SOLVE_FAILURE: 'PLATE_SOLVE_FAILURE',
+    PLATE_SOLVE_NOT_ENOUGH_STARS_FAILURE: 'PLATE_SOLVE_NOT_ENOUGH_STARS_FAILURE',
+    PLATE_SOLVE_NO_SOLUTION_FAILURE: 'PLATE_SOLVE_NO_SOLUTION_FAILURE',
+    CROP_IMAGE_FAILURE: 'CROP_IMAGE_FAILURE',
+    COSMETIC_CORRECTION_FAILURE: 'COSMETIC_CORRECTION_FAILURE',
+    GRADIENT_REMOVAL_FAILURE: 'GRADIENT_REMOVAL_FAILURE',
+    CATMAG_FAILURE: 'CATMAG_FAILURE',
+    IMAGE_QUALITY_TOO_LOW: 'IMAGE_QUALITY_TOO_LOW',
+    OBSERVATION_NOT_FOUND: 'OBSERVATION_NOT_FOUND',
+    NODE_NOT_FOUND: 'NODE_NOT_FOUND',
+    CAMERA_NOT_FOUND: 'CAMERA_NOT_FOUND',
+    OTA_NOT_FOUND: 'OTA_NOT_FOUND',
+    TLE_NOT_EXTRACTED: 'TLE_NOT_EXTRACTED',
+    FAILED_TO_LOAD: 'FAILED_TO_LOAD',
+    GPS_ERROR: 'GPS_ERROR',
+    MUTEX_TIMEOUT: 'MUTEX_TIMEOUT',
+    AWAIT_TIMEOUT: 'AWAIT_TIMEOUT',
+    CATALOG_COMPARE_ERROR: 'CATALOG_COMPARE_ERROR',
+    SAVE_FAILURE: 'SAVE_FAILURE',
+    RATE_CATALOG_COMPARE_ERROR: 'RATE_CATALOG_COMPARE_ERROR',
+    MISSING_IMG_WIDTH_HEADER: 'MISSING_IMG_WIDTH_HEADER',
+    UNKNOWN_ERROR: 'UNKNOWN_ERROR'
+} as const;
+
+export type V1ImageRejectionReason = typeof V1ImageRejectionReason[keyof typeof V1ImageRejectionReason];
+
+
 /**
  * An image set represents a contiguous set of observations of the same target captured by the same node.
  * @export
@@ -1269,7 +1307,15 @@ export interface V1ImageSetImage {
      * @memberof V1ImageSetImage
      */
     'predictedStreakLocation'?: V1PredictedStreakLocation;
+    /**
+     * 
+     * @type {V1ImageRejectionReason}
+     * @memberof V1ImageSetImage
+     */
+    'rejectedReason'?: V1ImageRejectionReason;
 }
+
+
 /**
  * Extracted stars that matched during plate solving
  * @export

package/base.ts

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  * 
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/common.ts

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  * 
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/configuration.ts

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  * 
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/api.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -967,6 +967,40 @@ export interface V1ImageMetadata {
      */
     'createdAt': string;
 }
+/**
+ *
+ * @export
+ * @enum {string}
+ */
+export declare const V1ImageRejectionReason: {
+    readonly TARGET_NOT_FOUND: "TARGET_NOT_FOUND";
+    readonly RATE_TARGET_NOT_FOUND: "RATE_TARGET_NOT_FOUND";
+    readonly RATE_PLATE_SOLVE_FAILURE: "RATE_PLATE_SOLVE_FAILURE";
+    readonly STREAK_DETECTION_FAILURE: "STREAK_DETECTION_FAILURE";
+    readonly PLATE_SOLVE_FAILURE: "PLATE_SOLVE_FAILURE";
+    readonly PLATE_SOLVE_NOT_ENOUGH_STARS_FAILURE: "PLATE_SOLVE_NOT_ENOUGH_STARS_FAILURE";
+    readonly PLATE_SOLVE_NO_SOLUTION_FAILURE: "PLATE_SOLVE_NO_SOLUTION_FAILURE";
+    readonly CROP_IMAGE_FAILURE: "CROP_IMAGE_FAILURE";
+    readonly COSMETIC_CORRECTION_FAILURE: "COSMETIC_CORRECTION_FAILURE";
+    readonly GRADIENT_REMOVAL_FAILURE: "GRADIENT_REMOVAL_FAILURE";
+    readonly CATMAG_FAILURE: "CATMAG_FAILURE";
+    readonly IMAGE_QUALITY_TOO_LOW: "IMAGE_QUALITY_TOO_LOW";
+    readonly OBSERVATION_NOT_FOUND: "OBSERVATION_NOT_FOUND";
+    readonly NODE_NOT_FOUND: "NODE_NOT_FOUND";
+    readonly CAMERA_NOT_FOUND: "CAMERA_NOT_FOUND";
+    readonly OTA_NOT_FOUND: "OTA_NOT_FOUND";
+    readonly TLE_NOT_EXTRACTED: "TLE_NOT_EXTRACTED";
+    readonly FAILED_TO_LOAD: "FAILED_TO_LOAD";
+    readonly GPS_ERROR: "GPS_ERROR";
+    readonly MUTEX_TIMEOUT: "MUTEX_TIMEOUT";
+    readonly AWAIT_TIMEOUT: "AWAIT_TIMEOUT";
+    readonly CATALOG_COMPARE_ERROR: "CATALOG_COMPARE_ERROR";
+    readonly SAVE_FAILURE: "SAVE_FAILURE";
+    readonly RATE_CATALOG_COMPARE_ERROR: "RATE_CATALOG_COMPARE_ERROR";
+    readonly MISSING_IMG_WIDTH_HEADER: "MISSING_IMG_WIDTH_HEADER";
+    readonly UNKNOWN_ERROR: "UNKNOWN_ERROR";
+};
+export type V1ImageRejectionReason = typeof V1ImageRejectionReason[keyof typeof V1ImageRejectionReason];
 /**
  * An image set represents a contiguous set of observations of the same target captured by the same node.
  * @export
@@ -1202,6 +1236,12 @@ export interface V1ImageSetImage {
      * @memberof V1ImageSetImage
      */
     'predictedStreakLocation'?: V1PredictedStreakLocation;
+    /**
+     *
+     * @type {V1ImageRejectionReason}
+     * @memberof V1ImageSetImage
+     */
+    'rejectedReason'?: V1ImageRejectionReason;
 }
 /**
  * Extracted stars that matched during plate solving

package/dist/api.js

@@ -5,7 +5,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -22,7 +22,7 @@ var __awaiter = (this && this.__awaiter) || function (thisArg, _arguments, P, ge
     });
 };
 Object.defineProperty(exports, "__esModule", { value: true });
-exports.V2GetSearchesStatusEnum = exports.DefaultApi = exports.DefaultApiFactory = exports.DefaultApiFp = exports.DefaultApiAxiosParamCreator = exports.WebhookEvent = exports.WebhookAuthType = exports.WeatherCondition = exports.V1StateVectorReferenceFrameEnum = exports.V1SatelliteCalibrationFamily = exports.V1PlateSolveStatus = exports.V1ImageFileType = exports.V1BlackoutVolumeRequestReferenceFrameEnum = exports.TrackingType = exports.ShutterType = exports.SearchCompletedReason = exports.SatelliteTargetTrackingStatus = exports.OrbitType = exports.ObservationState = exports.MountType = exports.ImageSetType = exports.FilterType = void 0;
+exports.V2GetSearchesStatusEnum = exports.DefaultApi = exports.DefaultApiFactory = exports.DefaultApiFp = exports.DefaultApiAxiosParamCreator = exports.WebhookEvent = exports.WebhookAuthType = exports.WeatherCondition = exports.V1StateVectorReferenceFrameEnum = exports.V1SatelliteCalibrationFamily = exports.V1PlateSolveStatus = exports.V1ImageRejectionReason = exports.V1ImageFileType = exports.V1BlackoutVolumeRequestReferenceFrameEnum = exports.TrackingType = exports.ShutterType = exports.SearchCompletedReason = exports.SatelliteTargetTrackingStatus = exports.OrbitType = exports.ObservationState = exports.MountType = exports.ImageSetType = exports.FilterType = void 0;
 const axios_1 = require("axios");
 // Some imports not used depending on template conditions
 // @ts-ignore
@@ -174,6 +174,39 @@ exports.V1ImageFileType = {
     FITS: 'FITS',
     JPG: 'JPG'
 };
+/**
+ *
+ * @export
+ * @enum {string}
+ */
+exports.V1ImageRejectionReason = {
+    TARGET_NOT_FOUND: 'TARGET_NOT_FOUND',
+    RATE_TARGET_NOT_FOUND: 'RATE_TARGET_NOT_FOUND',
+    RATE_PLATE_SOLVE_FAILURE: 'RATE_PLATE_SOLVE_FAILURE',
+    STREAK_DETECTION_FAILURE: 'STREAK_DETECTION_FAILURE',
+    PLATE_SOLVE_FAILURE: 'PLATE_SOLVE_FAILURE',
+    PLATE_SOLVE_NOT_ENOUGH_STARS_FAILURE: 'PLATE_SOLVE_NOT_ENOUGH_STARS_FAILURE',
+    PLATE_SOLVE_NO_SOLUTION_FAILURE: 'PLATE_SOLVE_NO_SOLUTION_FAILURE',
+    CROP_IMAGE_FAILURE: 'CROP_IMAGE_FAILURE',
+    COSMETIC_CORRECTION_FAILURE: 'COSMETIC_CORRECTION_FAILURE',
+    GRADIENT_REMOVAL_FAILURE: 'GRADIENT_REMOVAL_FAILURE',
+    CATMAG_FAILURE: 'CATMAG_FAILURE',
+    IMAGE_QUALITY_TOO_LOW: 'IMAGE_QUALITY_TOO_LOW',
+    OBSERVATION_NOT_FOUND: 'OBSERVATION_NOT_FOUND',
+    NODE_NOT_FOUND: 'NODE_NOT_FOUND',
+    CAMERA_NOT_FOUND: 'CAMERA_NOT_FOUND',
+    OTA_NOT_FOUND: 'OTA_NOT_FOUND',
+    TLE_NOT_EXTRACTED: 'TLE_NOT_EXTRACTED',
+    FAILED_TO_LOAD: 'FAILED_TO_LOAD',
+    GPS_ERROR: 'GPS_ERROR',
+    MUTEX_TIMEOUT: 'MUTEX_TIMEOUT',
+    AWAIT_TIMEOUT: 'AWAIT_TIMEOUT',
+    CATALOG_COMPARE_ERROR: 'CATALOG_COMPARE_ERROR',
+    SAVE_FAILURE: 'SAVE_FAILURE',
+    RATE_CATALOG_COMPARE_ERROR: 'RATE_CATALOG_COMPARE_ERROR',
+    MISSING_IMG_WIDTH_HEADER: 'MISSING_IMG_WIDTH_HEADER',
+    UNKNOWN_ERROR: 'UNKNOWN_ERROR'
+};
 /**
  *
  * @export

package/dist/base.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/base.js

@@ -5,7 +5,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/common.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/common.js

@@ -5,7 +5,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/configuration.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/configuration.js

@@ -5,7 +5,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/esm/api.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -967,6 +967,40 @@ export interface V1ImageMetadata {
      */
     'createdAt': string;
 }
+/**
+ *
+ * @export
+ * @enum {string}
+ */
+export declare const V1ImageRejectionReason: {
+    readonly TARGET_NOT_FOUND: "TARGET_NOT_FOUND";
+    readonly RATE_TARGET_NOT_FOUND: "RATE_TARGET_NOT_FOUND";
+    readonly RATE_PLATE_SOLVE_FAILURE: "RATE_PLATE_SOLVE_FAILURE";
+    readonly STREAK_DETECTION_FAILURE: "STREAK_DETECTION_FAILURE";
+    readonly PLATE_SOLVE_FAILURE: "PLATE_SOLVE_FAILURE";
+    readonly PLATE_SOLVE_NOT_ENOUGH_STARS_FAILURE: "PLATE_SOLVE_NOT_ENOUGH_STARS_FAILURE";
+    readonly PLATE_SOLVE_NO_SOLUTION_FAILURE: "PLATE_SOLVE_NO_SOLUTION_FAILURE";
+    readonly CROP_IMAGE_FAILURE: "CROP_IMAGE_FAILURE";
+    readonly COSMETIC_CORRECTION_FAILURE: "COSMETIC_CORRECTION_FAILURE";
+    readonly GRADIENT_REMOVAL_FAILURE: "GRADIENT_REMOVAL_FAILURE";
+    readonly CATMAG_FAILURE: "CATMAG_FAILURE";
+    readonly IMAGE_QUALITY_TOO_LOW: "IMAGE_QUALITY_TOO_LOW";
+    readonly OBSERVATION_NOT_FOUND: "OBSERVATION_NOT_FOUND";
+    readonly NODE_NOT_FOUND: "NODE_NOT_FOUND";
+    readonly CAMERA_NOT_FOUND: "CAMERA_NOT_FOUND";
+    readonly OTA_NOT_FOUND: "OTA_NOT_FOUND";
+    readonly TLE_NOT_EXTRACTED: "TLE_NOT_EXTRACTED";
+    readonly FAILED_TO_LOAD: "FAILED_TO_LOAD";
+    readonly GPS_ERROR: "GPS_ERROR";
+    readonly MUTEX_TIMEOUT: "MUTEX_TIMEOUT";
+    readonly AWAIT_TIMEOUT: "AWAIT_TIMEOUT";
+    readonly CATALOG_COMPARE_ERROR: "CATALOG_COMPARE_ERROR";
+    readonly SAVE_FAILURE: "SAVE_FAILURE";
+    readonly RATE_CATALOG_COMPARE_ERROR: "RATE_CATALOG_COMPARE_ERROR";
+    readonly MISSING_IMG_WIDTH_HEADER: "MISSING_IMG_WIDTH_HEADER";
+    readonly UNKNOWN_ERROR: "UNKNOWN_ERROR";
+};
+export type V1ImageRejectionReason = typeof V1ImageRejectionReason[keyof typeof V1ImageRejectionReason];
 /**
  * An image set represents a contiguous set of observations of the same target captured by the same node.
  * @export
@@ -1202,6 +1236,12 @@ export interface V1ImageSetImage {
      * @memberof V1ImageSetImage
      */
     'predictedStreakLocation'?: V1PredictedStreakLocation;
+    /**
+     *
+     * @type {V1ImageRejectionReason}
+     * @memberof V1ImageSetImage
+     */
+    'rejectedReason'?: V1ImageRejectionReason;
 }
 /**
  * Extracted stars that matched during plate solving

package/dist/esm/api.js

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -171,6 +171,39 @@ export const V1ImageFileType = {
     FITS: 'FITS',
     JPG: 'JPG'
 };
+/**
+ *
+ * @export
+ * @enum {string}
+ */
+export const V1ImageRejectionReason = {
+    TARGET_NOT_FOUND: 'TARGET_NOT_FOUND',
+    RATE_TARGET_NOT_FOUND: 'RATE_TARGET_NOT_FOUND',
+    RATE_PLATE_SOLVE_FAILURE: 'RATE_PLATE_SOLVE_FAILURE',
+    STREAK_DETECTION_FAILURE: 'STREAK_DETECTION_FAILURE',
+    PLATE_SOLVE_FAILURE: 'PLATE_SOLVE_FAILURE',
+    PLATE_SOLVE_NOT_ENOUGH_STARS_FAILURE: 'PLATE_SOLVE_NOT_ENOUGH_STARS_FAILURE',
+    PLATE_SOLVE_NO_SOLUTION_FAILURE: 'PLATE_SOLVE_NO_SOLUTION_FAILURE',
+    CROP_IMAGE_FAILURE: 'CROP_IMAGE_FAILURE',
+    COSMETIC_CORRECTION_FAILURE: 'COSMETIC_CORRECTION_FAILURE',
+    GRADIENT_REMOVAL_FAILURE: 'GRADIENT_REMOVAL_FAILURE',
+    CATMAG_FAILURE: 'CATMAG_FAILURE',
+    IMAGE_QUALITY_TOO_LOW: 'IMAGE_QUALITY_TOO_LOW',
+    OBSERVATION_NOT_FOUND: 'OBSERVATION_NOT_FOUND',
+    NODE_NOT_FOUND: 'NODE_NOT_FOUND',
+    CAMERA_NOT_FOUND: 'CAMERA_NOT_FOUND',
+    OTA_NOT_FOUND: 'OTA_NOT_FOUND',
+    TLE_NOT_EXTRACTED: 'TLE_NOT_EXTRACTED',
+    FAILED_TO_LOAD: 'FAILED_TO_LOAD',
+    GPS_ERROR: 'GPS_ERROR',
+    MUTEX_TIMEOUT: 'MUTEX_TIMEOUT',
+    AWAIT_TIMEOUT: 'AWAIT_TIMEOUT',
+    CATALOG_COMPARE_ERROR: 'CATALOG_COMPARE_ERROR',
+    SAVE_FAILURE: 'SAVE_FAILURE',
+    RATE_CATALOG_COMPARE_ERROR: 'RATE_CATALOG_COMPARE_ERROR',
+    MISSING_IMG_WIDTH_HEADER: 'MISSING_IMG_WIDTH_HEADER',
+    UNKNOWN_ERROR: 'UNKNOWN_ERROR'
+};
 /**
  *
  * @export

package/dist/esm/base.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/esm/base.js

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/esm/common.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/esm/common.js

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/esm/configuration.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/esm/configuration.js

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/esm/index.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/esm/index.js

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/index.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/index.js

@@ -5,7 +5,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/index.ts

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](#tag/satellite-targets/GET/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](#tag/organization-targets/GET/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](#tag/webhooks/POST/v1/communications/webhook) endpoint to receive OSRs automatically (preferred) or use the [OSRs](#tag/observation-sequence-results/GET/v1/observation-sequence-results) endpoint to poll for OSRs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.8639
+ * The version of the OpenAPI document: 1.3.8815
  * 
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@ourskyai/sda-api",
-  "version": "1.3.8639",
+  "version": "1.3.8815",
   "description": "OpenAPI client for @ourskyai/sda-api",
   "author": "OpenAPI-Generator Contributors",
   "repository": {