@ourskyai/sda-api 1.3.5447 → 1.3.5667

package/README.md

@@ -1,4 +1,4 @@
-## @ourskyai/sda-api@1.3.5447
+## @ourskyai/sda-api@1.3.5667
 
 This generator creates TypeScript/JavaScript client that utilizes [axios](https://github.com/axios/axios). The generated Node module can be used in the following environments:
 
@@ -36,7 +36,7 @@ navigate to the folder of your consuming project and run one of the following co
 _published:_
 
 ```
-npm install @ourskyai/sda-api@1.3.5447 --save
+npm install @ourskyai/sda-api@1.3.5667 --save
 ```
 
 _unPublished (not recommended):_

package/api.ts

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  * 
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -321,13 +321,13 @@ export interface ObservationResult {
      */
     'apparentMagnitude'?: number;
     /**
-     * BETA: the solar phase angle in degrees at the time of observation
+     * BETA: the solar phase angle, defined as the angle between the target->observer and target->sun vectors, in degrees at the time of observation
      * @type {number}
      * @memberof ObservationResult
      */
     'solarPhaseAngle'?: number;
     /**
-     * BETA: the solar equatorial phase angle in degrees at the time of observation
+     * BETA: the solar equatorial phase angle, defined as the solar phase angle in the equatorial plane, in degrees at the time of observation
      * @type {number}
      * @memberof ObservationResult
      */
@@ -1357,6 +1357,55 @@ export interface V1PredictedStreakLocation {
      */
     'endY'?: number;
 }
+/**
+ * Upsert (create or update) a satellite target with new a new TLE. If creating a new target, do not enter a `satellite_target_id`.  If updating an existing satellite target, the satellite target id must be one found in the OurSky database using the `/v1/satellite-targets` endpoint.
+ * @export
+ * @interface V1PutOrbitProviderTLERequest
+ */
+export interface V1PutOrbitProviderTLERequest {
+    /**
+     * Existing target id of an OurSky target that you are providing a TLE for. Leave null if one does not exist in the database.
+     * @type {string}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'satellite_target_id'?: string;
+    /**
+     * 
+     * @type {string}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'tle_line_1': string;
+    /**
+     * 
+     * @type {string}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'tle_line_2': string;
+    /**
+     * 
+     * @type {string}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'tle_name'?: string;
+    /**
+     * mass in kilograms
+     * @type {number}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'mass'?: number;
+    /**
+     * The Cr value used to calculate acceleration due to solar radiation pressure
+     * @type {number}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'coefficientOfReflection'?: number;
+    /**
+     * cross sectional area in meters^2
+     * @type {number}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'crossSection'?: number;
+}
 /**
  * SatellitePotential
  * @export
@@ -1884,7 +1933,7 @@ export interface V1UpdateSatelliteTargetRequest {
      */
     'tleLine2': string;
     /**
-     * -| The OurSky Satellite Target. When this is specified OurSky will automatically choose the TLE to use based on which target has the newest TLE. The private target or the upstream target. Caution, setting this to null will unlink the target
+     * The OurSky Satellite Target. When this is specified OurSky will automatically choose the TLE to use based on which target has the newest TLE. The private target or the upstream target. Caution, setting this to null will unlink the target
      * @type {string}
      * @memberof V1UpdateSatelliteTargetRequest
      */
@@ -3617,6 +3666,47 @@ export const DefaultApiAxiosParamCreator = function (configuration?: Configurati
                 options: localVarRequestOptions,
             };
         },
+        /**
+         * Create or update an orbit for a target via a two-line element set (TLE)
+         * @param {V1PutOrbitProviderTLERequest} v1PutOrbitProviderTLERequest 
+         * @param {*} [options] Override http request option.
+         * @throws {RequiredError}
+         */
+        v1PutOrbitProviderTLEOrbit: async (v1PutOrbitProviderTLERequest: V1PutOrbitProviderTLERequest, options: AxiosRequestConfig = {}): Promise<RequestArgs> => {
+            // verify required parameter 'v1PutOrbitProviderTLERequest' is not null or undefined
+            assertParamExists('v1PutOrbitProviderTLEOrbit', 'v1PutOrbitProviderTLERequest', v1PutOrbitProviderTLERequest)
+            const localVarPath = `/v1/orbit-provider/tle`;
+            // use dummy base URL string because the URL constructor only accepts absolute URLs.
+            const localVarUrlObj = new URL(localVarPath, DUMMY_BASE_URL);
+            let baseOptions;
+            if (configuration) {
+                baseOptions = configuration.baseOptions;
+            }
+
+            const localVarRequestOptions = { method: 'PUT', ...baseOptions, ...options};
+            const localVarHeaderParameter = {} as any;
+            const localVarQueryParameter = {} as any;
+
+            // authentication Roles required
+
+            // authentication BearerToken required
+            // http bearer authentication required
+            await setBearerAuthToObject(localVarHeaderParameter, configuration)
+
+
+    
+            localVarHeaderParameter['Content-Type'] = 'application/json';
+
+            setSearchParams(localVarUrlObj, localVarQueryParameter);
+            let headersFromBaseOptions = baseOptions && baseOptions.headers ? baseOptions.headers : {};
+            localVarRequestOptions.headers = {...localVarHeaderParameter, ...headersFromBaseOptions, ...options.headers};
+            localVarRequestOptions.data = serializeDataIfNeeded(v1PutOrbitProviderTLERequest, localVarRequestOptions, configuration)
+
+            return {
+                url: toPathString(localVarUrlObj),
+                options: localVarRequestOptions,
+            };
+        },
         /**
          * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
          * @param {V1UpdateEmailConfigurationRequest} v1UpdateEmailConfigurationRequest 
@@ -3700,7 +3790,7 @@ export const DefaultApiAxiosParamCreator = function (configuration?: Configurati
             };
         },
         /**
-         * Update satellite target.
+         * Update a private satellite target.
          * @param {V1UpdateSatelliteTargetRequest} v1UpdateSatelliteTargetRequest 
          * @param {*} [options] Override http request option.
          * @throws {RequiredError}
@@ -4155,6 +4245,16 @@ export const DefaultApiFp = function(configuration?: Configuration) {
             const localVarAxiosArgs = await localVarAxiosParamCreator.v1GetWebhookLogs(webhookId, limit, offset, options);
             return createRequestFunction(localVarAxiosArgs, globalAxios, BASE_PATH, configuration);
         },
+        /**
+         * Create or update an orbit for a target via a two-line element set (TLE)
+         * @param {V1PutOrbitProviderTLERequest} v1PutOrbitProviderTLERequest 
+         * @param {*} [options] Override http request option.
+         * @throws {RequiredError}
+         */
+        async v1PutOrbitProviderTLEOrbit(v1PutOrbitProviderTLERequest: V1PutOrbitProviderTLERequest, options?: AxiosRequestConfig): Promise<(axios?: AxiosInstance, basePath?: string) => AxiosPromise<SuccessfulCreate>> {
+            const localVarAxiosArgs = await localVarAxiosParamCreator.v1PutOrbitProviderTLEOrbit(v1PutOrbitProviderTLERequest, options);
+            return createRequestFunction(localVarAxiosArgs, globalAxios, BASE_PATH, configuration);
+        },
         /**
          * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
          * @param {V1UpdateEmailConfigurationRequest} v1UpdateEmailConfigurationRequest 
@@ -4176,7 +4276,7 @@ export const DefaultApiFp = function(configuration?: Configuration) {
             return createRequestFunction(localVarAxiosArgs, globalAxios, BASE_PATH, configuration);
         },
         /**
-         * Update satellite target.
+         * Update a private satellite target.
          * @param {V1UpdateSatelliteTargetRequest} v1UpdateSatelliteTargetRequest 
          * @param {*} [options] Override http request option.
          * @throws {RequiredError}
@@ -4517,6 +4617,15 @@ export const DefaultApiFactory = function (configuration?: Configuration, basePa
         v1GetWebhookLogs(requestParameters: DefaultApiV1GetWebhookLogsRequest, options?: AxiosRequestConfig): AxiosPromise<Array<V1WebhookLog>> {
             return localVarFp.v1GetWebhookLogs(requestParameters.webhookId, requestParameters.limit, requestParameters.offset, options).then((request) => request(axios, basePath));
         },
+        /**
+         * Create or update an orbit for a target via a two-line element set (TLE)
+         * @param {DefaultApiV1PutOrbitProviderTLEOrbitRequest} requestParameters Request parameters.
+         * @param {*} [options] Override http request option.
+         * @throws {RequiredError}
+         */
+        v1PutOrbitProviderTLEOrbit(requestParameters: DefaultApiV1PutOrbitProviderTLEOrbitRequest, options?: AxiosRequestConfig): AxiosPromise<SuccessfulCreate> {
+            return localVarFp.v1PutOrbitProviderTLEOrbit(requestParameters.v1PutOrbitProviderTLERequest, options).then((request) => request(axios, basePath));
+        },
         /**
          * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
          * @param {DefaultApiV1UpdateEmailConfigurationRequest} requestParameters Request parameters.
@@ -4536,7 +4645,7 @@ export const DefaultApiFactory = function (configuration?: Configuration, basePa
             return localVarFp.v1UpdateOrganizationTarget(requestParameters.v1UpdateOrganizationTargetRequest, options).then((request) => request(axios, basePath));
         },
         /**
-         * Update satellite target.
+         * Update a private satellite target.
          * @param {DefaultApiV1UpdateSatelliteTargetRequest} requestParameters Request parameters.
          * @param {*} [options] Override http request option.
          * @throws {RequiredError}
@@ -5123,6 +5232,20 @@ export interface DefaultApiV1GetWebhookLogsRequest {
     readonly offset?: number
 }
 
+/**
+ * Request parameters for v1PutOrbitProviderTLEOrbit operation in DefaultApi.
+ * @export
+ * @interface DefaultApiV1PutOrbitProviderTLEOrbitRequest
+ */
+export interface DefaultApiV1PutOrbitProviderTLEOrbitRequest {
+    /**
+     * 
+     * @type {V1PutOrbitProviderTLERequest}
+     * @memberof DefaultApiV1PutOrbitProviderTLEOrbit
+     */
+    readonly v1PutOrbitProviderTLERequest: V1PutOrbitProviderTLERequest
+}
+
 /**
  * Request parameters for v1UpdateEmailConfiguration operation in DefaultApi.
  * @export
@@ -5568,6 +5691,17 @@ export class DefaultApi extends BaseAPI {
         return DefaultApiFp(this.configuration).v1GetWebhookLogs(requestParameters.webhookId, requestParameters.limit, requestParameters.offset, options).then((request) => request(this.axios, this.basePath));
     }
 
+    /**
+     * Create or update an orbit for a target via a two-line element set (TLE)
+     * @param {DefaultApiV1PutOrbitProviderTLEOrbitRequest} requestParameters Request parameters.
+     * @param {*} [options] Override http request option.
+     * @throws {RequiredError}
+     * @memberof DefaultApi
+     */
+    public v1PutOrbitProviderTLEOrbit(requestParameters: DefaultApiV1PutOrbitProviderTLEOrbitRequest, options?: AxiosRequestConfig) {
+        return DefaultApiFp(this.configuration).v1PutOrbitProviderTLEOrbit(requestParameters.v1PutOrbitProviderTLERequest, options).then((request) => request(this.axios, this.basePath));
+    }
+
     /**
      * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
      * @param {DefaultApiV1UpdateEmailConfigurationRequest} requestParameters Request parameters.
@@ -5591,7 +5725,7 @@ export class DefaultApi extends BaseAPI {
     }
 
     /**
-     * Update satellite target.
+     * Update a private satellite target.
      * @param {DefaultApiV1UpdateSatelliteTargetRequest} requestParameters Request parameters.
      * @param {*} [options] Override http request option.
      * @throws {RequiredError}

package/base.ts

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  * 
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/common.ts

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  * 
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/configuration.ts

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  * 
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/api.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -299,13 +299,13 @@ export interface ObservationResult {
      */
     'apparentMagnitude'?: number;
     /**
-     * BETA: the solar phase angle in degrees at the time of observation
+     * BETA: the solar phase angle, defined as the angle between the target->observer and target->sun vectors, in degrees at the time of observation
      * @type {number}
      * @memberof ObservationResult
      */
     'solarPhaseAngle'?: number;
     /**
-     * BETA: the solar equatorial phase angle in degrees at the time of observation
+     * BETA: the solar equatorial phase angle, defined as the solar phase angle in the equatorial plane, in degrees at the time of observation
      * @type {number}
      * @memberof ObservationResult
      */
@@ -1303,6 +1303,55 @@ export interface V1PredictedStreakLocation {
      */
     'endY'?: number;
 }
+/**
+ * Upsert (create or update) a satellite target with new a new TLE. If creating a new target, do not enter a `satellite_target_id`.  If updating an existing satellite target, the satellite target id must be one found in the OurSky database using the `/v1/satellite-targets` endpoint.
+ * @export
+ * @interface V1PutOrbitProviderTLERequest
+ */
+export interface V1PutOrbitProviderTLERequest {
+    /**
+     * Existing target id of an OurSky target that you are providing a TLE for. Leave null if one does not exist in the database.
+     * @type {string}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'satellite_target_id'?: string;
+    /**
+     *
+     * @type {string}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'tle_line_1': string;
+    /**
+     *
+     * @type {string}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'tle_line_2': string;
+    /**
+     *
+     * @type {string}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'tle_name'?: string;
+    /**
+     * mass in kilograms
+     * @type {number}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'mass'?: number;
+    /**
+     * The Cr value used to calculate acceleration due to solar radiation pressure
+     * @type {number}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'coefficientOfReflection'?: number;
+    /**
+     * cross sectional area in meters^2
+     * @type {number}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'crossSection'?: number;
+}
 /**
  * SatellitePotential
  * @export
@@ -1824,7 +1873,7 @@ export interface V1UpdateSatelliteTargetRequest {
      */
     'tleLine2': string;
     /**
-     * -| The OurSky Satellite Target. When this is specified OurSky will automatically choose the TLE to use based on which target has the newest TLE. The private target or the upstream target. Caution, setting this to null will unlink the target
+     * The OurSky Satellite Target. When this is specified OurSky will automatically choose the TLE to use based on which target has the newest TLE. The private target or the upstream target. Caution, setting this to null will unlink the target
      * @type {string}
      * @memberof V1UpdateSatelliteTargetRequest
      */
@@ -2274,6 +2323,13 @@ export declare const DefaultApiAxiosParamCreator: (configuration?: Configuration
      * @throws {RequiredError}
      */
     v1GetWebhookLogs: (webhookId: string, limit?: number, offset?: number, options?: AxiosRequestConfig) => Promise<RequestArgs>;
+    /**
+     * Create or update an orbit for a target via a two-line element set (TLE)
+     * @param {V1PutOrbitProviderTLERequest} v1PutOrbitProviderTLERequest
+     * @param {*} [options] Override http request option.
+     * @throws {RequiredError}
+     */
+    v1PutOrbitProviderTLEOrbit: (v1PutOrbitProviderTLERequest: V1PutOrbitProviderTLERequest, options?: AxiosRequestConfig) => Promise<RequestArgs>;
     /**
      * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
      * @param {V1UpdateEmailConfigurationRequest} v1UpdateEmailConfigurationRequest
@@ -2289,7 +2345,7 @@ export declare const DefaultApiAxiosParamCreator: (configuration?: Configuration
      */
     v1UpdateOrganizationTarget: (v1UpdateOrganizationTargetRequest: V1UpdateOrganizationTargetRequest, options?: AxiosRequestConfig) => Promise<RequestArgs>;
     /**
-     * Update satellite target.
+     * Update a private satellite target.
      * @param {V1UpdateSatelliteTargetRequest} v1UpdateSatelliteTargetRequest
      * @param {*} [options] Override http request option.
      * @throws {RequiredError}
@@ -2567,6 +2623,13 @@ export declare const DefaultApiFp: (configuration?: Configuration) => {
      * @throws {RequiredError}
      */
     v1GetWebhookLogs(webhookId: string, limit?: number, offset?: number, options?: AxiosRequestConfig): Promise<(axios?: AxiosInstance, basePath?: string) => AxiosPromise<Array<V1WebhookLog>>>;
+    /**
+     * Create or update an orbit for a target via a two-line element set (TLE)
+     * @param {V1PutOrbitProviderTLERequest} v1PutOrbitProviderTLERequest
+     * @param {*} [options] Override http request option.
+     * @throws {RequiredError}
+     */
+    v1PutOrbitProviderTLEOrbit(v1PutOrbitProviderTLERequest: V1PutOrbitProviderTLERequest, options?: AxiosRequestConfig): Promise<(axios?: AxiosInstance, basePath?: string) => AxiosPromise<SuccessfulCreate>>;
     /**
      * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
      * @param {V1UpdateEmailConfigurationRequest} v1UpdateEmailConfigurationRequest
@@ -2582,7 +2645,7 @@ export declare const DefaultApiFp: (configuration?: Configuration) => {
      */
     v1UpdateOrganizationTarget(v1UpdateOrganizationTargetRequest: V1UpdateOrganizationTargetRequest, options?: AxiosRequestConfig): Promise<(axios?: AxiosInstance, basePath?: string) => AxiosPromise<V1OrganizationTarget>>;
     /**
-     * Update satellite target.
+     * Update a private satellite target.
      * @param {V1UpdateSatelliteTargetRequest} v1UpdateSatelliteTargetRequest
      * @param {*} [options] Override http request option.
      * @throws {RequiredError}
@@ -2843,6 +2906,13 @@ export declare const DefaultApiFactory: (configuration?: Configuration, basePath
      * @throws {RequiredError}
      */
     v1GetWebhookLogs(requestParameters: DefaultApiV1GetWebhookLogsRequest, options?: AxiosRequestConfig): AxiosPromise<Array<V1WebhookLog>>;
+    /**
+     * Create or update an orbit for a target via a two-line element set (TLE)
+     * @param {DefaultApiV1PutOrbitProviderTLEOrbitRequest} requestParameters Request parameters.
+     * @param {*} [options] Override http request option.
+     * @throws {RequiredError}
+     */
+    v1PutOrbitProviderTLEOrbit(requestParameters: DefaultApiV1PutOrbitProviderTLEOrbitRequest, options?: AxiosRequestConfig): AxiosPromise<SuccessfulCreate>;
     /**
      * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
      * @param {DefaultApiV1UpdateEmailConfigurationRequest} requestParameters Request parameters.
@@ -2858,7 +2928,7 @@ export declare const DefaultApiFactory: (configuration?: Configuration, basePath
      */
     v1UpdateOrganizationTarget(requestParameters: DefaultApiV1UpdateOrganizationTargetRequest, options?: AxiosRequestConfig): AxiosPromise<V1OrganizationTarget>;
     /**
-     * Update satellite target.
+     * Update a private satellite target.
      * @param {DefaultApiV1UpdateSatelliteTargetRequest} requestParameters Request parameters.
      * @param {*} [options] Override http request option.
      * @throws {RequiredError}
@@ -3390,6 +3460,19 @@ export interface DefaultApiV1GetWebhookLogsRequest {
      */
     readonly offset?: number;
 }
+/**
+ * Request parameters for v1PutOrbitProviderTLEOrbit operation in DefaultApi.
+ * @export
+ * @interface DefaultApiV1PutOrbitProviderTLEOrbitRequest
+ */
+export interface DefaultApiV1PutOrbitProviderTLEOrbitRequest {
+    /**
+     *
+     * @type {V1PutOrbitProviderTLERequest}
+     * @memberof DefaultApiV1PutOrbitProviderTLEOrbit
+     */
+    readonly v1PutOrbitProviderTLERequest: V1PutOrbitProviderTLERequest;
+}
 /**
  * Request parameters for v1UpdateEmailConfiguration operation in DefaultApi.
  * @export
@@ -3726,6 +3809,14 @@ export declare class DefaultApi extends BaseAPI {
      * @memberof DefaultApi
      */
     v1GetWebhookLogs(requestParameters: DefaultApiV1GetWebhookLogsRequest, options?: AxiosRequestConfig): Promise<import("axios").AxiosResponse<V1WebhookLog[], any>>;
+    /**
+     * Create or update an orbit for a target via a two-line element set (TLE)
+     * @param {DefaultApiV1PutOrbitProviderTLEOrbitRequest} requestParameters Request parameters.
+     * @param {*} [options] Override http request option.
+     * @throws {RequiredError}
+     * @memberof DefaultApi
+     */
+    v1PutOrbitProviderTLEOrbit(requestParameters: DefaultApiV1PutOrbitProviderTLEOrbitRequest, options?: AxiosRequestConfig): Promise<import("axios").AxiosResponse<SuccessfulCreate, any>>;
     /**
      * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
      * @param {DefaultApiV1UpdateEmailConfigurationRequest} requestParameters Request parameters.
@@ -3743,7 +3834,7 @@ export declare class DefaultApi extends BaseAPI {
      */
     v1UpdateOrganizationTarget(requestParameters: DefaultApiV1UpdateOrganizationTargetRequest, options?: AxiosRequestConfig): Promise<import("axios").AxiosResponse<V1OrganizationTarget, any>>;
     /**
-     * Update satellite target.
+     * Update a private satellite target.
      * @param {DefaultApiV1UpdateSatelliteTargetRequest} requestParameters Request parameters.
      * @param {*} [options] Override http request option.
      * @throws {RequiredError}

package/dist/api.js

@@ -5,7 +5,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -1419,6 +1419,39 @@ const DefaultApiAxiosParamCreator = function (configuration) {
                 options: localVarRequestOptions,
             };
         }),
+        /**
+         * Create or update an orbit for a target via a two-line element set (TLE)
+         * @param {V1PutOrbitProviderTLERequest} v1PutOrbitProviderTLERequest
+         * @param {*} [options] Override http request option.
+         * @throws {RequiredError}
+         */
+        v1PutOrbitProviderTLEOrbit: (v1PutOrbitProviderTLERequest, options = {}) => __awaiter(this, void 0, void 0, function* () {
+            // verify required parameter 'v1PutOrbitProviderTLERequest' is not null or undefined
+            (0, common_1.assertParamExists)('v1PutOrbitProviderTLEOrbit', 'v1PutOrbitProviderTLERequest', v1PutOrbitProviderTLERequest);
+            const localVarPath = `/v1/orbit-provider/tle`;
+            // use dummy base URL string because the URL constructor only accepts absolute URLs.
+            const localVarUrlObj = new URL(localVarPath, common_1.DUMMY_BASE_URL);
+            let baseOptions;
+            if (configuration) {
+                baseOptions = configuration.baseOptions;
+            }
+            const localVarRequestOptions = Object.assign(Object.assign({ method: 'PUT' }, baseOptions), options);
+            const localVarHeaderParameter = {};
+            const localVarQueryParameter = {};
+            // authentication Roles required
+            // authentication BearerToken required
+            // http bearer authentication required
+            yield (0, common_1.setBearerAuthToObject)(localVarHeaderParameter, configuration);
+            localVarHeaderParameter['Content-Type'] = 'application/json';
+            (0, common_1.setSearchParams)(localVarUrlObj, localVarQueryParameter);
+            let headersFromBaseOptions = baseOptions && baseOptions.headers ? baseOptions.headers : {};
+            localVarRequestOptions.headers = Object.assign(Object.assign(Object.assign({}, localVarHeaderParameter), headersFromBaseOptions), options.headers);
+            localVarRequestOptions.data = (0, common_1.serializeDataIfNeeded)(v1PutOrbitProviderTLERequest, localVarRequestOptions, configuration);
+            return {
+                url: (0, common_1.toPathString)(localVarUrlObj),
+                options: localVarRequestOptions,
+            };
+        }),
         /**
          * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
          * @param {V1UpdateEmailConfigurationRequest} v1UpdateEmailConfigurationRequest
@@ -1486,7 +1519,7 @@ const DefaultApiAxiosParamCreator = function (configuration) {
             };
         }),
         /**
-         * Update satellite target.
+         * Update a private satellite target.
          * @param {V1UpdateSatelliteTargetRequest} v1UpdateSatelliteTargetRequest
          * @param {*} [options] Override http request option.
          * @throws {RequiredError}
@@ -1995,6 +2028,18 @@ const DefaultApiFp = function (configuration) {
                 return (0, common_1.createRequestFunction)(localVarAxiosArgs, axios_1.default, base_1.BASE_PATH, configuration);
             });
         },
+        /**
+         * Create or update an orbit for a target via a two-line element set (TLE)
+         * @param {V1PutOrbitProviderTLERequest} v1PutOrbitProviderTLERequest
+         * @param {*} [options] Override http request option.
+         * @throws {RequiredError}
+         */
+        v1PutOrbitProviderTLEOrbit(v1PutOrbitProviderTLERequest, options) {
+            return __awaiter(this, void 0, void 0, function* () {
+                const localVarAxiosArgs = yield localVarAxiosParamCreator.v1PutOrbitProviderTLEOrbit(v1PutOrbitProviderTLERequest, options);
+                return (0, common_1.createRequestFunction)(localVarAxiosArgs, axios_1.default, base_1.BASE_PATH, configuration);
+            });
+        },
         /**
          * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
          * @param {V1UpdateEmailConfigurationRequest} v1UpdateEmailConfigurationRequest
@@ -2020,7 +2065,7 @@ const DefaultApiFp = function (configuration) {
             });
         },
         /**
-         * Update satellite target.
+         * Update a private satellite target.
          * @param {V1UpdateSatelliteTargetRequest} v1UpdateSatelliteTargetRequest
          * @param {*} [options] Override http request option.
          * @throws {RequiredError}
@@ -2365,6 +2410,15 @@ const DefaultApiFactory = function (configuration, basePath, axios) {
         v1GetWebhookLogs(requestParameters, options) {
             return localVarFp.v1GetWebhookLogs(requestParameters.webhookId, requestParameters.limit, requestParameters.offset, options).then((request) => request(axios, basePath));
         },
+        /**
+         * Create or update an orbit for a target via a two-line element set (TLE)
+         * @param {DefaultApiV1PutOrbitProviderTLEOrbitRequest} requestParameters Request parameters.
+         * @param {*} [options] Override http request option.
+         * @throws {RequiredError}
+         */
+        v1PutOrbitProviderTLEOrbit(requestParameters, options) {
+            return localVarFp.v1PutOrbitProviderTLEOrbit(requestParameters.v1PutOrbitProviderTLERequest, options).then((request) => request(axios, basePath));
+        },
         /**
          * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
          * @param {DefaultApiV1UpdateEmailConfigurationRequest} requestParameters Request parameters.
@@ -2384,7 +2438,7 @@ const DefaultApiFactory = function (configuration, basePath, axios) {
             return localVarFp.v1UpdateOrganizationTarget(requestParameters.v1UpdateOrganizationTargetRequest, options).then((request) => request(axios, basePath));
         },
         /**
-         * Update satellite target.
+         * Update a private satellite target.
          * @param {DefaultApiV1UpdateSatelliteTargetRequest} requestParameters Request parameters.
          * @param {*} [options] Override http request option.
          * @throws {RequiredError}
@@ -2758,6 +2812,16 @@ class DefaultApi extends base_1.BaseAPI {
     v1GetWebhookLogs(requestParameters, options) {
         return (0, exports.DefaultApiFp)(this.configuration).v1GetWebhookLogs(requestParameters.webhookId, requestParameters.limit, requestParameters.offset, options).then((request) => request(this.axios, this.basePath));
     }
+    /**
+     * Create or update an orbit for a target via a two-line element set (TLE)
+     * @param {DefaultApiV1PutOrbitProviderTLEOrbitRequest} requestParameters Request parameters.
+     * @param {*} [options] Override http request option.
+     * @throws {RequiredError}
+     * @memberof DefaultApi
+     */
+    v1PutOrbitProviderTLEOrbit(requestParameters, options) {
+        return (0, exports.DefaultApiFp)(this.configuration).v1PutOrbitProviderTLEOrbit(requestParameters.v1PutOrbitProviderTLERequest, options).then((request) => request(this.axios, this.basePath));
+    }
     /**
      * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
      * @param {DefaultApiV1UpdateEmailConfigurationRequest} requestParameters Request parameters.
@@ -2779,7 +2843,7 @@ class DefaultApi extends base_1.BaseAPI {
         return (0, exports.DefaultApiFp)(this.configuration).v1UpdateOrganizationTarget(requestParameters.v1UpdateOrganizationTargetRequest, options).then((request) => request(this.axios, this.basePath));
     }
     /**
-     * Update satellite target.
+     * Update a private satellite target.
      * @param {DefaultApiV1UpdateSatelliteTargetRequest} requestParameters Request parameters.
      * @param {*} [options] Override http request option.
      * @throws {RequiredError}

package/dist/base.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/base.js

@@ -5,7 +5,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/common.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/common.js

@@ -5,7 +5,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/configuration.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/configuration.js

@@ -5,7 +5,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/esm/api.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -299,13 +299,13 @@ export interface ObservationResult {
      */
     'apparentMagnitude'?: number;
     /**
-     * BETA: the solar phase angle in degrees at the time of observation
+     * BETA: the solar phase angle, defined as the angle between the target->observer and target->sun vectors, in degrees at the time of observation
      * @type {number}
      * @memberof ObservationResult
      */
     'solarPhaseAngle'?: number;
     /**
-     * BETA: the solar equatorial phase angle in degrees at the time of observation
+     * BETA: the solar equatorial phase angle, defined as the solar phase angle in the equatorial plane, in degrees at the time of observation
      * @type {number}
      * @memberof ObservationResult
      */
@@ -1303,6 +1303,55 @@ export interface V1PredictedStreakLocation {
      */
     'endY'?: number;
 }
+/**
+ * Upsert (create or update) a satellite target with new a new TLE. If creating a new target, do not enter a `satellite_target_id`.  If updating an existing satellite target, the satellite target id must be one found in the OurSky database using the `/v1/satellite-targets` endpoint.
+ * @export
+ * @interface V1PutOrbitProviderTLERequest
+ */
+export interface V1PutOrbitProviderTLERequest {
+    /**
+     * Existing target id of an OurSky target that you are providing a TLE for. Leave null if one does not exist in the database.
+     * @type {string}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'satellite_target_id'?: string;
+    /**
+     *
+     * @type {string}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'tle_line_1': string;
+    /**
+     *
+     * @type {string}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'tle_line_2': string;
+    /**
+     *
+     * @type {string}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'tle_name'?: string;
+    /**
+     * mass in kilograms
+     * @type {number}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'mass'?: number;
+    /**
+     * The Cr value used to calculate acceleration due to solar radiation pressure
+     * @type {number}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'coefficientOfReflection'?: number;
+    /**
+     * cross sectional area in meters^2
+     * @type {number}
+     * @memberof V1PutOrbitProviderTLERequest
+     */
+    'crossSection'?: number;
+}
 /**
  * SatellitePotential
  * @export
@@ -1824,7 +1873,7 @@ export interface V1UpdateSatelliteTargetRequest {
      */
     'tleLine2': string;
     /**
-     * -| The OurSky Satellite Target. When this is specified OurSky will automatically choose the TLE to use based on which target has the newest TLE. The private target or the upstream target. Caution, setting this to null will unlink the target
+     * The OurSky Satellite Target. When this is specified OurSky will automatically choose the TLE to use based on which target has the newest TLE. The private target or the upstream target. Caution, setting this to null will unlink the target
      * @type {string}
      * @memberof V1UpdateSatelliteTargetRequest
      */
@@ -2274,6 +2323,13 @@ export declare const DefaultApiAxiosParamCreator: (configuration?: Configuration
      * @throws {RequiredError}
      */
     v1GetWebhookLogs: (webhookId: string, limit?: number, offset?: number, options?: AxiosRequestConfig) => Promise<RequestArgs>;
+    /**
+     * Create or update an orbit for a target via a two-line element set (TLE)
+     * @param {V1PutOrbitProviderTLERequest} v1PutOrbitProviderTLERequest
+     * @param {*} [options] Override http request option.
+     * @throws {RequiredError}
+     */
+    v1PutOrbitProviderTLEOrbit: (v1PutOrbitProviderTLERequest: V1PutOrbitProviderTLERequest, options?: AxiosRequestConfig) => Promise<RequestArgs>;
     /**
      * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
      * @param {V1UpdateEmailConfigurationRequest} v1UpdateEmailConfigurationRequest
@@ -2289,7 +2345,7 @@ export declare const DefaultApiAxiosParamCreator: (configuration?: Configuration
      */
     v1UpdateOrganizationTarget: (v1UpdateOrganizationTargetRequest: V1UpdateOrganizationTargetRequest, options?: AxiosRequestConfig) => Promise<RequestArgs>;
     /**
-     * Update satellite target.
+     * Update a private satellite target.
      * @param {V1UpdateSatelliteTargetRequest} v1UpdateSatelliteTargetRequest
      * @param {*} [options] Override http request option.
      * @throws {RequiredError}
@@ -2567,6 +2623,13 @@ export declare const DefaultApiFp: (configuration?: Configuration) => {
      * @throws {RequiredError}
      */
     v1GetWebhookLogs(webhookId: string, limit?: number, offset?: number, options?: AxiosRequestConfig): Promise<(axios?: AxiosInstance, basePath?: string) => AxiosPromise<Array<V1WebhookLog>>>;
+    /**
+     * Create or update an orbit for a target via a two-line element set (TLE)
+     * @param {V1PutOrbitProviderTLERequest} v1PutOrbitProviderTLERequest
+     * @param {*} [options] Override http request option.
+     * @throws {RequiredError}
+     */
+    v1PutOrbitProviderTLEOrbit(v1PutOrbitProviderTLERequest: V1PutOrbitProviderTLERequest, options?: AxiosRequestConfig): Promise<(axios?: AxiosInstance, basePath?: string) => AxiosPromise<SuccessfulCreate>>;
     /**
      * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
      * @param {V1UpdateEmailConfigurationRequest} v1UpdateEmailConfigurationRequest
@@ -2582,7 +2645,7 @@ export declare const DefaultApiFp: (configuration?: Configuration) => {
      */
     v1UpdateOrganizationTarget(v1UpdateOrganizationTargetRequest: V1UpdateOrganizationTargetRequest, options?: AxiosRequestConfig): Promise<(axios?: AxiosInstance, basePath?: string) => AxiosPromise<V1OrganizationTarget>>;
     /**
-     * Update satellite target.
+     * Update a private satellite target.
      * @param {V1UpdateSatelliteTargetRequest} v1UpdateSatelliteTargetRequest
      * @param {*} [options] Override http request option.
      * @throws {RequiredError}
@@ -2843,6 +2906,13 @@ export declare const DefaultApiFactory: (configuration?: Configuration, basePath
      * @throws {RequiredError}
      */
     v1GetWebhookLogs(requestParameters: DefaultApiV1GetWebhookLogsRequest, options?: AxiosRequestConfig): AxiosPromise<Array<V1WebhookLog>>;
+    /**
+     * Create or update an orbit for a target via a two-line element set (TLE)
+     * @param {DefaultApiV1PutOrbitProviderTLEOrbitRequest} requestParameters Request parameters.
+     * @param {*} [options] Override http request option.
+     * @throws {RequiredError}
+     */
+    v1PutOrbitProviderTLEOrbit(requestParameters: DefaultApiV1PutOrbitProviderTLEOrbitRequest, options?: AxiosRequestConfig): AxiosPromise<SuccessfulCreate>;
     /**
      * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
      * @param {DefaultApiV1UpdateEmailConfigurationRequest} requestParameters Request parameters.
@@ -2858,7 +2928,7 @@ export declare const DefaultApiFactory: (configuration?: Configuration, basePath
      */
     v1UpdateOrganizationTarget(requestParameters: DefaultApiV1UpdateOrganizationTargetRequest, options?: AxiosRequestConfig): AxiosPromise<V1OrganizationTarget>;
     /**
-     * Update satellite target.
+     * Update a private satellite target.
      * @param {DefaultApiV1UpdateSatelliteTargetRequest} requestParameters Request parameters.
      * @param {*} [options] Override http request option.
      * @throws {RequiredError}
@@ -3390,6 +3460,19 @@ export interface DefaultApiV1GetWebhookLogsRequest {
      */
     readonly offset?: number;
 }
+/**
+ * Request parameters for v1PutOrbitProviderTLEOrbit operation in DefaultApi.
+ * @export
+ * @interface DefaultApiV1PutOrbitProviderTLEOrbitRequest
+ */
+export interface DefaultApiV1PutOrbitProviderTLEOrbitRequest {
+    /**
+     *
+     * @type {V1PutOrbitProviderTLERequest}
+     * @memberof DefaultApiV1PutOrbitProviderTLEOrbit
+     */
+    readonly v1PutOrbitProviderTLERequest: V1PutOrbitProviderTLERequest;
+}
 /**
  * Request parameters for v1UpdateEmailConfiguration operation in DefaultApi.
  * @export
@@ -3726,6 +3809,14 @@ export declare class DefaultApi extends BaseAPI {
      * @memberof DefaultApi
      */
     v1GetWebhookLogs(requestParameters: DefaultApiV1GetWebhookLogsRequest, options?: AxiosRequestConfig): Promise<import("axios").AxiosResponse<V1WebhookLog[], any>>;
+    /**
+     * Create or update an orbit for a target via a two-line element set (TLE)
+     * @param {DefaultApiV1PutOrbitProviderTLEOrbitRequest} requestParameters Request parameters.
+     * @param {*} [options] Override http request option.
+     * @throws {RequiredError}
+     * @memberof DefaultApi
+     */
+    v1PutOrbitProviderTLEOrbit(requestParameters: DefaultApiV1PutOrbitProviderTLEOrbitRequest, options?: AxiosRequestConfig): Promise<import("axios").AxiosResponse<SuccessfulCreate, any>>;
     /**
      * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
      * @param {DefaultApiV1UpdateEmailConfigurationRequest} requestParameters Request parameters.
@@ -3743,7 +3834,7 @@ export declare class DefaultApi extends BaseAPI {
      */
     v1UpdateOrganizationTarget(requestParameters: DefaultApiV1UpdateOrganizationTargetRequest, options?: AxiosRequestConfig): Promise<import("axios").AxiosResponse<V1OrganizationTarget, any>>;
     /**
-     * Update satellite target.
+     * Update a private satellite target.
      * @param {DefaultApiV1UpdateSatelliteTargetRequest} requestParameters Request parameters.
      * @param {*} [options] Override http request option.
      * @throws {RequiredError}

package/dist/esm/api.js

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).
@@ -1416,6 +1416,39 @@ export const DefaultApiAxiosParamCreator = function (configuration) {
                 options: localVarRequestOptions,
             };
         }),
+        /**
+         * Create or update an orbit for a target via a two-line element set (TLE)
+         * @param {V1PutOrbitProviderTLERequest} v1PutOrbitProviderTLERequest
+         * @param {*} [options] Override http request option.
+         * @throws {RequiredError}
+         */
+        v1PutOrbitProviderTLEOrbit: (v1PutOrbitProviderTLERequest, options = {}) => __awaiter(this, void 0, void 0, function* () {
+            // verify required parameter 'v1PutOrbitProviderTLERequest' is not null or undefined
+            assertParamExists('v1PutOrbitProviderTLEOrbit', 'v1PutOrbitProviderTLERequest', v1PutOrbitProviderTLERequest);
+            const localVarPath = `/v1/orbit-provider/tle`;
+            // use dummy base URL string because the URL constructor only accepts absolute URLs.
+            const localVarUrlObj = new URL(localVarPath, DUMMY_BASE_URL);
+            let baseOptions;
+            if (configuration) {
+                baseOptions = configuration.baseOptions;
+            }
+            const localVarRequestOptions = Object.assign(Object.assign({ method: 'PUT' }, baseOptions), options);
+            const localVarHeaderParameter = {};
+            const localVarQueryParameter = {};
+            // authentication Roles required
+            // authentication BearerToken required
+            // http bearer authentication required
+            yield setBearerAuthToObject(localVarHeaderParameter, configuration);
+            localVarHeaderParameter['Content-Type'] = 'application/json';
+            setSearchParams(localVarUrlObj, localVarQueryParameter);
+            let headersFromBaseOptions = baseOptions && baseOptions.headers ? baseOptions.headers : {};
+            localVarRequestOptions.headers = Object.assign(Object.assign(Object.assign({}, localVarHeaderParameter), headersFromBaseOptions), options.headers);
+            localVarRequestOptions.data = serializeDataIfNeeded(v1PutOrbitProviderTLERequest, localVarRequestOptions, configuration);
+            return {
+                url: toPathString(localVarUrlObj),
+                options: localVarRequestOptions,
+            };
+        }),
         /**
          * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
          * @param {V1UpdateEmailConfigurationRequest} v1UpdateEmailConfigurationRequest
@@ -1483,7 +1516,7 @@ export const DefaultApiAxiosParamCreator = function (configuration) {
             };
         }),
         /**
-         * Update satellite target.
+         * Update a private satellite target.
          * @param {V1UpdateSatelliteTargetRequest} v1UpdateSatelliteTargetRequest
          * @param {*} [options] Override http request option.
          * @throws {RequiredError}
@@ -1991,6 +2024,18 @@ export const DefaultApiFp = function (configuration) {
                 return createRequestFunction(localVarAxiosArgs, globalAxios, BASE_PATH, configuration);
             });
         },
+        /**
+         * Create or update an orbit for a target via a two-line element set (TLE)
+         * @param {V1PutOrbitProviderTLERequest} v1PutOrbitProviderTLERequest
+         * @param {*} [options] Override http request option.
+         * @throws {RequiredError}
+         */
+        v1PutOrbitProviderTLEOrbit(v1PutOrbitProviderTLERequest, options) {
+            return __awaiter(this, void 0, void 0, function* () {
+                const localVarAxiosArgs = yield localVarAxiosParamCreator.v1PutOrbitProviderTLEOrbit(v1PutOrbitProviderTLERequest, options);
+                return createRequestFunction(localVarAxiosArgs, globalAxios, BASE_PATH, configuration);
+            });
+        },
         /**
          * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
          * @param {V1UpdateEmailConfigurationRequest} v1UpdateEmailConfigurationRequest
@@ -2016,7 +2061,7 @@ export const DefaultApiFp = function (configuration) {
             });
         },
         /**
-         * Update satellite target.
+         * Update a private satellite target.
          * @param {V1UpdateSatelliteTargetRequest} v1UpdateSatelliteTargetRequest
          * @param {*} [options] Override http request option.
          * @throws {RequiredError}
@@ -2360,6 +2405,15 @@ export const DefaultApiFactory = function (configuration, basePath, axios) {
         v1GetWebhookLogs(requestParameters, options) {
             return localVarFp.v1GetWebhookLogs(requestParameters.webhookId, requestParameters.limit, requestParameters.offset, options).then((request) => request(axios, basePath));
         },
+        /**
+         * Create or update an orbit for a target via a two-line element set (TLE)
+         * @param {DefaultApiV1PutOrbitProviderTLEOrbitRequest} requestParameters Request parameters.
+         * @param {*} [options] Override http request option.
+         * @throws {RequiredError}
+         */
+        v1PutOrbitProviderTLEOrbit(requestParameters, options) {
+            return localVarFp.v1PutOrbitProviderTLEOrbit(requestParameters.v1PutOrbitProviderTLERequest, options).then((request) => request(axios, basePath));
+        },
         /**
          * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
          * @param {DefaultApiV1UpdateEmailConfigurationRequest} requestParameters Request parameters.
@@ -2379,7 +2433,7 @@ export const DefaultApiFactory = function (configuration, basePath, axios) {
             return localVarFp.v1UpdateOrganizationTarget(requestParameters.v1UpdateOrganizationTargetRequest, options).then((request) => request(axios, basePath));
         },
         /**
-         * Update satellite target.
+         * Update a private satellite target.
          * @param {DefaultApiV1UpdateSatelliteTargetRequest} requestParameters Request parameters.
          * @param {*} [options] Override http request option.
          * @throws {RequiredError}
@@ -2752,6 +2806,16 @@ export class DefaultApi extends BaseAPI {
     v1GetWebhookLogs(requestParameters, options) {
         return DefaultApiFp(this.configuration).v1GetWebhookLogs(requestParameters.webhookId, requestParameters.limit, requestParameters.offset, options).then((request) => request(this.axios, this.basePath));
     }
+    /**
+     * Create or update an orbit for a target via a two-line element set (TLE)
+     * @param {DefaultApiV1PutOrbitProviderTLEOrbitRequest} requestParameters Request parameters.
+     * @param {*} [options] Override http request option.
+     * @throws {RequiredError}
+     * @memberof DefaultApi
+     */
+    v1PutOrbitProviderTLEOrbit(requestParameters, options) {
+        return DefaultApiFp(this.configuration).v1PutOrbitProviderTLEOrbit(requestParameters.v1PutOrbitProviderTLERequest, options).then((request) => request(this.axios, this.basePath));
+    }
     /**
      * Update your organization email communication preferences. This will overwrite any existing preferences.  This communication preference is meant as an audit log, it is a fire hose of all events. The schemas are not considered stable and may change at any time. If you are looking for machine to machine communication, please use webhooks.
      * @param {DefaultApiV1UpdateEmailConfigurationRequest} requestParameters Request parameters.
@@ -2773,7 +2837,7 @@ export class DefaultApi extends BaseAPI {
         return DefaultApiFp(this.configuration).v1UpdateOrganizationTarget(requestParameters.v1UpdateOrganizationTargetRequest, options).then((request) => request(this.axios, this.basePath));
     }
     /**
-     * Update satellite target.
+     * Update a private satellite target.
      * @param {DefaultApiV1UpdateSatelliteTargetRequest} requestParameters Request parameters.
      * @param {*} [options] Override http request option.
      * @throws {RequiredError}

package/dist/esm/base.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/esm/base.js

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/esm/common.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/esm/common.js

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/esm/configuration.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/esm/configuration.js

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/esm/index.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/esm/index.js

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/index.d.ts

@@ -2,7 +2,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/dist/index.js

@@ -5,7 +5,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  *
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/index.ts

@@ -4,7 +4,7 @@
  * OurSky SDA
  * The basic flow for a new organization is as follows: 1. View the available satellite targets with the [satellite targets](https://api.prod.oursky.ai/docs/sda#tag/satellite-targets/get/v1/satellite-targets) endpoint. Copy the id of the target you want to observe. 2. Create an organization target with the [organization target](https://api.prod.oursky.ai/docs/sda#tag/organization-targets/get/v1/organization-targets) endpoint. Use the id copied from above. 3. Create a webhook with the [webhook](https://api.prod.oursky.ai/docs/sda#tag/webhooks/post/v1/communications/webhook) endpoint to receive TDMs automatically (preferred) or use the [tdms](https://api.prod.oursky.ai/docs/sda#tag/tdms/get/v1/tdms) endpoint to poll for TDMs.  Check out our [examples](https://github.com/ourskyai/oursky-examples) repository to see usage in each language.
  *
- * The version of the OpenAPI document: 1.3.5447
+ * The version of the OpenAPI document: 1.3.5667
  * 
  *
  * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@ourskyai/sda-api",
-  "version": "1.3.5447",
+  "version": "1.3.5667",
   "description": "OpenAPI client for @ourskyai/sda-api",
   "author": "OpenAPI-Generator Contributors",
   "repository": {