@ory/continue 0.12.0 → 0.12.1

package/README.md

@@ -20,7 +20,7 @@ This targets the **`cn` CLI** (not the Continue IDE extension), verified against
 Run one command. It installs the plugin and walks you through connecting:
 
 ```bash
-npx -y -p @ory/continue ory-continue install
+npx -y -p @ory/continue ory-cn install
 ```
 
 Continue has no native install command, so this writes the Ory hooks into your project settings and drops the Ory skills into your project — Continue turns each skill into a slash command automatically (so the local Ory commands show up as `/ory-local-up`, `/ory-local-down`, and `/ory-temporal-up`).
@@ -34,7 +34,7 @@ You'll be asked how you want to connect — **press Enter for the default**:
 That's it. Confirm everything landed with:
 
 ```bash
-npx -y -p @ory/continue ory-continue status
+npx -y -p @ory/continue ory-cn status
 ```
 
 `status` is your one-stop check: what's configured, who's signed in, which tools are covered by permissions, and recent activity. Anything not set up yet shows as `(unset)`.
@@ -57,11 +57,11 @@ Under the hood, Continue runs the plugin the same way [Claude Code](https://gith
 
 Everything the plugin does is observable out of the box — no configuration required:
 
-- **Status at a glance.** `npx -y -p @ory/continue ory-continue status` shows what's configured, who's signed in, how many built-in tools your permissions cover, and the most recent tool-call activity.
+- **Status at a glance.** `npx -y -p @ory/continue ory-cn status` shows what's configured, who's signed in, how many built-in tools your permissions cover, and the most recent tool-call activity.
 - **Live traces.** Every tool call is recorded as an OpenTelemetry-style span. Watch them stream as the agent works:
 
   ```bash
-  npx -y -p @ory/continue ory-continue watch
+  npx -y -p @ory/continue ory-cn watch
   ```
 
   Spans are also written to `~/.config/ory-agent-plugins/continue/ory-agent-trace.ndjson` (NDJSON, one span per line) — tail that file, or point `OTEL_EXPORTER_OTLP_ENDPOINT` at a collector to ship them straight to Jaeger, Honeycomb, or Grafana.
@@ -72,7 +72,7 @@ Everything the plugin does is observable out of the box — no configuration req
 When the watch-mode logs look right, turn on blocking with one command (setup already granted you the built-in tools):
 
 ```bash
-npx -y -p @ory/continue ory-continue permissions enforce
+npx -y -p @ory/continue ory-cn permissions enforce
 ```
 
 Now a denied tool is actually blocked. Go back to watch mode anytime with `permissions observe`. Use `permissions status` to see what's covered and `permissions bootstrap` to (re-)grant the built-in tools.
@@ -88,7 +88,7 @@ Bundled **skills** (just ask in plain language, and Continue surfaces each as a
 The guided setup covers most people. For scripted or CI setups, or to point at an existing Ory Network project, configure directly. Settings are saved to `~/.config/ory-agent-plugins/config.json` and shared across all your Ory agent plugins; environment variables win when both are set.
 
 ```bash
-npx -y -p @ory/continue ory-continue configure \
+npx -y -p @ory/continue ory-cn configure \
   --project-url https://<slug>.projects.oryapis.com \
   --oauth2-client-id <login client id> \
   --user-login
@@ -123,12 +123,12 @@ With nothing configured, the plugin still loads and runs in **pass-through mode*
 ## Commands
 
 ```
-ory-continue install | uninstall        Install/remove; --reconfigure re-runs setup, --no-configure skips it
-ory-continue status                      Show configuration, identities, permission coverage, recent activity
-ory-continue watch                       Tail the live trace stream (OTel spans)
-ory-continue permissions <cmd>           status | bootstrap | observe (watch) | enforce (block)
-ory-continue configure <flags>           Point at a project by hand (--project-url, --oauth2-client-id, --user-login, --audit-only)
-ory-continue agent <status|unregister>   Manage Continue's own auto-created identity
+ory-cn install | uninstall        Install/remove; --reconfigure re-runs setup, --no-configure skips it
+ory-cn status                      Show configuration, identities, permission coverage, recent activity
+ory-cn watch                       Tail the live trace stream (OTel spans)
+ory-cn permissions <cmd>           status | bootstrap | observe (watch) | enforce (block)
+ory-cn configure <flags>           Point at a project by hand (--project-url, --oauth2-client-id, --user-login, --audit-only)
+ory-cn agent <status|unregister>   Manage Continue's own auto-created identity
 ```
 
 All prefixed with `npx -y -p @ory/continue`.
@@ -136,10 +136,10 @@ All prefixed with `npx -y -p @ory/continue`.
 ## Troubleshooting
 
 - **`/ory-local-up` fails** — make sure Docker is running and ports `4000`, `4100`, `4455`, and `16686` are free.
-- **Browser sign-in loops** — reset with `ory-continue agent unregister` and try again.
-- **`npx` grabbed an old version** — force the latest: `npx -y -p @ory/continue@latest ory-continue …`.
+- **Browser sign-in loops** — reset with `ory-cn agent unregister` and try again.
+- **`npx` grabbed an old version** — force the latest: `npx -y -p @ory/continue@latest ory-cn …`.
 - **Hooks stuck on an old version** — re-run the installer.
-- **Want to see what's happening** — `npx -y -p @ory/continue ory-continue status` for a snapshot, `npx -y -p @ory/continue ory-continue watch` for the live trace stream, or set `ORY_AGENT_DEBUG=true` for a verbose log. Traces and logs live under `~/.config/ory-agent-plugins/continue/` (see [See what's happening](#see-whats-happening)).
+- **Want to see what's happening** — `npx -y -p @ory/continue ory-cn status` for a snapshot, `npx -y -p @ory/continue ory-cn watch` for the live trace stream, or set `ORY_AGENT_DEBUG=true` for a verbose log. Traces and logs live under `~/.config/ory-agent-plugins/continue/` (see [See what's happening](#see-whats-happening)).
 
 ## Learn more
 

package/dist/cli/assets.js

@@ -56,7 +56,7 @@ const argus_1 = require("@ory/argus");
 const HARNESS = "continue";
 const PACKAGE_NAME = "@ory/continue";
 const RENDER_OPTS = {
-    binName: "ory-continue",
+    binName: "ory-cn",
     packageName: PACKAGE_NAME,
 };
 function safeRmEmpty(dir) {

package/dist/cli/main.d.ts

@@ -3,12 +3,12 @@
  * Main CLI for @ory/continue.
  *
  * Usage:
- *   npx ory-continue install                Write hooks to settings.json + assets
- *   npx ory-continue uninstall              Remove hooks and assets
- *   npx ory-continue configure              Set or view Ory credentials
- *   npx ory-continue setup [--project-dir]  Write hooks to settings.json directly
- *   npx ory-continue status                 Show plugin status
- *   npx ory-continue local <cmd>            Manage local Ory dev environment
+ *   npx ory-cn install                Write hooks to settings.json + assets
+ *   npx ory-cn uninstall              Remove hooks and assets
+ *   npx ory-cn configure              Set or view Ory credentials
+ *   npx ory-cn setup [--project-dir]  Write hooks to settings.json directly
+ *   npx ory-cn status                 Show plugin status
+ *   npx ory-cn local <cmd>            Manage local Ory dev environment
  *
  * Continue (the `cn` CLI) has no extension-install command, so `install` is a
  * thin wrapper over the same settings.json setup path the README documents.

package/dist/cli/main.js

@@ -4,12 +4,12 @@
  * Main CLI for @ory/continue.
  *
  * Usage:
- *   npx ory-continue install                Write hooks to settings.json + assets
- *   npx ory-continue uninstall              Remove hooks and assets
- *   npx ory-continue configure              Set or view Ory credentials
- *   npx ory-continue setup [--project-dir]  Write hooks to settings.json directly
- *   npx ory-continue status                 Show plugin status
- *   npx ory-continue local <cmd>            Manage local Ory dev environment
+ *   npx ory-cn install                Write hooks to settings.json + assets
+ *   npx ory-cn uninstall              Remove hooks and assets
+ *   npx ory-cn configure              Set or view Ory credentials
+ *   npx ory-cn setup [--project-dir]  Write hooks to settings.json directly
+ *   npx ory-cn status                 Show plugin status
+ *   npx ory-cn local <cmd>            Manage local Ory dev environment
  *
  * Continue (the `cn` CLI) has no extension-install command, so `install` is a
  * thin wrapper over the same settings.json setup path the README documents.
@@ -58,7 +58,7 @@ function main() {
         case "install":
             (0, argus_1.beginDeferNextSteps)();
             install(args);
-            (0, argus_1.runPostInstall)("ory-continue", "continue", args).then(() => process.exit(0), (err) => {
+            (0, argus_1.runPostInstall)("ory-cn", "continue", args).then(() => process.exit(0), (err) => {
                 console.error(err.message ?? err);
                 process.exit(1);
             });
@@ -71,16 +71,16 @@ function main() {
             });
             break;
         case "configure":
-            (0, argus_1.runConfigureCommand)("ory-continue", args);
+            (0, argus_1.runConfigureCommand)("ory-cn", args);
             break;
         case "agent":
-            (0, argus_1.runAgentCommand)("ory-continue", args).then((code) => process.exit(code), (err) => {
+            (0, argus_1.runAgentCommand)("ory-cn", args).then((code) => process.exit(code), (err) => {
                 console.error(err.message ?? err);
                 process.exit(1);
             });
             break;
         case "permissions":
-            (0, argus_1.runPermissionsCommand)("ory-continue", "continue", args).then((code) => process.exit(code), (err) => {
+            (0, argus_1.runPermissionsCommand)("ory-cn", "continue", args).then((code) => process.exit(code), (err) => {
                 console.error(err.message ?? err);
                 process.exit(1);
             });
@@ -95,7 +95,7 @@ function main() {
             });
             break;
         case "local":
-            (0, argus_1.runLocalCommand)("ory-continue", args).catch((err) => {
+            (0, argus_1.runLocalCommand)("ory-cn", args).catch((err) => {
                 console.error(err.message ?? err);
                 process.exit(1);
             });
@@ -125,7 +125,7 @@ function install(args) {
     process.argv = ["node", "setup.js", ...args];
     require("./setup.js");
     printQuickstart();
-    (0, argus_1.printEnvHelp)("ory-continue");
+    (0, argus_1.printEnvHelp)("ory-cn");
 }
 function uninstall(args) {
     const setupArgs = ["--uninstall", ...args];
@@ -144,7 +144,7 @@ function printQuickstart() {
     console.log("  3. Set ORY_USER_LOGIN=true to enable the interactive PKCE browser login.");
 }
 async function status() {
-    await (0, argus_1.runStatusCommand)("ory-continue", "continue", {
+    await (0, argus_1.runStatusCommand)("ory-cn", "continue", {
         title: "Continue CLI",
         printPluginSection: () => {
             console.log("Hooks & plugin:");
@@ -155,10 +155,10 @@ async function status() {
 }
 function help() {
     console.log(`
-ory-continue — Ory plugin for Continue CLI (cn)
+ory-cn — Ory plugin for Continue CLI (cn)
 
 Usage:
-  npx -y -p @ory/continue ory-continue <command> [options]
+  npx -y -p @ory/continue ory-cn <command> [options]
 
 Commands:
   install                Write Ory hooks and skills into .continue/
@@ -177,9 +177,9 @@ After installing, the plugin hooks into these Continue CLI lifecycle events:
   PostToolUse            Audit log tool executions
 
 Examples:
-  npx -y -p @ory/continue ory-continue install          # Install hooks + assets
-  npx -y -p @ory/continue ory-continue status           # Check configuration
-  npx -y -p @ory/continue ory-continue uninstall        # Remove hooks + assets
+  npx -y -p @ory/continue ory-cn install          # Install hooks + assets
+  npx -y -p @ory/continue ory-cn status           # Check configuration
+  npx -y -p @ory/continue ory-cn uninstall        # Remove hooks + assets
 `);
 }
 main();

package/dist/cli/setup.d.ts

@@ -6,10 +6,10 @@
  * directly into the harness's settings.json.
  *
  * Usage:
- *   npx ory-continue-setup                    # Auto-detect and configure
- *   npx ory-continue-setup --project-dir /path/to/repo
- *   npx ory-continue-setup --print            # Print config to stdout without writing
- *   npx ory-continue-setup --uninstall        # Remove Ory hooks from settings
+ *   npx ory-cn-setup                    # Auto-detect and configure
+ *   npx ory-cn-setup --project-dir /path/to/repo
+ *   npx ory-cn-setup --print            # Print config to stdout without writing
+ *   npx ory-cn-setup --uninstall        # Remove Ory hooks from settings
  *
  * Verified against @continuedev/cli: Continue reads a top-level `hooks` object
  * from `.continue/settings.json` (also `.claude/settings.json` and home

package/dist/cli/setup.js

@@ -7,10 +7,10 @@
  * directly into the harness's settings.json.
  *
  * Usage:
- *   npx ory-continue-setup                    # Auto-detect and configure
- *   npx ory-continue-setup --project-dir /path/to/repo
- *   npx ory-continue-setup --print            # Print config to stdout without writing
- *   npx ory-continue-setup --uninstall        # Remove Ory hooks from settings
+ *   npx ory-cn-setup                    # Auto-detect and configure
+ *   npx ory-cn-setup --project-dir /path/to/repo
+ *   npx ory-cn-setup --print            # Print config to stdout without writing
+ *   npx ory-cn-setup --uninstall        # Remove Ory hooks from settings
  *
  * Verified against @continuedev/cli: Continue reads a top-level `hooks` object
  * from `.continue/settings.json` (also `.claude/settings.json` and home
@@ -54,7 +54,7 @@ const fs = __importStar(require("node:fs"));
 const path = __importStar(require("node:path"));
 const argus_1 = require("@ory/argus");
 const assets_js_1 = require("./assets.js");
-const BIN_NAME = "ory-continue-hook";
+const BIN_NAME = "ory-cn-hook";
 const PACKAGE_NAME = "@ory/continue";
 function getSettingsPath(args) {
     return path.join(args.projectDir, ".continue", "settings.json");
@@ -77,7 +77,7 @@ function generateHooksConfig() {
 }
 function main() {
     if (process.argv.includes("--help") || process.argv.includes("-h")) {
-        (0, argus_1.printSetupHelp)("ory-continue-setup", "Continue CLI");
+        (0, argus_1.printSetupHelp)("ory-cn-setup", "Continue CLI");
         process.exit(0);
     }
     const args = (0, argus_1.parseSetupArgs)();
@@ -109,8 +109,8 @@ function main() {
     (0, assets_js_1.installContinueOryAssets)(continueDir);
     console.log(`Ory hooks and MCP server installed to ${settingsPath}`);
     console.log(`Ory skills installed to ${continueDir}`);
-    (0, argus_1.printNextSteps)("Continue CLI", "npx -y -p @ory/continue ory-continue-setup --uninstall", {
-        binName: "ory-continue",
+    (0, argus_1.printNextSteps)("Continue CLI", "npx -y -p @ory/continue ory-cn-setup --uninstall", {
+        binName: "ory-cn",
         harness: "continue",
     });
 }

package/dist/handlers.js

@@ -3,7 +3,7 @@ Object.defineProperty(exports, "__esModule", { value: true });
 exports.handleHookEvent = handleHookEvent;
 const argus_1 = require("@ory/argus");
 const HARNESS = "continue";
-const BIN_NAME = "ory-continue";
+const BIN_NAME = "ory-cn";
 /**
  * Route a Continue CLI hook event to the appropriate Ory integration.
  *
@@ -102,7 +102,7 @@ async function handleSessionStart(input, client, deps) {
     if (!resolved.projectUrl) {
         client.logger.warn("config.not_configured", {
             message: "Ory plugin is not configured. Auth and permission checks are disabled. " +
-                "Run 'npx ory-continue configure' to connect to an Ory project.",
+                "Run 'npx ory-cn configure' to connect to an Ory project.",
         });
         return {};
     }

package/dist/settings.js

@@ -67,7 +67,7 @@ function generateSettings(hookScriptPath) {
  * Generate settings assuming the plugin is installed via npm/pnpm.
  */
 function generateInstalledSettings() {
-    return generateSettings("ory-continue-hook");
+    return generateSettings("ory-cn-hook");
 }
 /**
  * Generate settings pointing to a local dev build.

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@ory/continue",
-  "version": "0.12.0",
+  "version": "0.12.1",
   "description": "Ory plugin for Continue CLI (cn): scaffolding skills, a local Ory instance, and authentication, authorization, and audit for every tool call",
   "license": "Apache-2.0",
   "homepage": "https://ory.com",
@@ -57,9 +57,9 @@
     }
   },
   "bin": {
-    "ory-continue": "dist/cli/main.js",
-    "ory-continue-hook": "dist/hook.js",
-    "ory-continue-setup": "dist/cli/setup.js"
+    "ory-cn": "dist/cli/main.js",
+    "ory-cn-hook": "dist/hook.js",
+    "ory-cn-setup": "dist/cli/setup.js"
   },
   "files": [
     "dist",
@@ -67,7 +67,8 @@
     "!dist/**/*.tsbuildinfo"
   ],
   "dependencies": {
-    "@ory/argus": "0.12.0"
+    "reo-census": "^1.2.8",
+    "@ory/argus": "0.12.1"
   },
   "engines": {
     "node": ">=22"