@opentrons/components 0.3.15-alpha.0 → 0.3.16-alpha.0

package/lib/localization.mjs

@@ -0,0 +1,551 @@
+const e = "Air gap", t = "Aspirate", o = "Aspirate", a = "Aspirate", n = "Blow out", s = "Blow out", _ = "Take a photo", i = "Comment", c = "Configure", r = "Configure", l = "Create CSV", p = "Create timer", u = "Write CSV row", m = "Custom", d = "Wait", g = "Dispense", h = "Dispense", w = "Dispense", b = "Drop tip", f = "Drop tip", v = "Get next tip", k = "Get tip", $ = "Home", y = "Identify", S = "Probe", x = "Load labware", L = "Load lid", C = "Load lid stack", T = "Load liquid", M = "Load liquid class", z = "Load module", P = "Load pipette", R = "Move", A = "Move", D = "Move", N = "Move", W = "Move", q = "Move", H = "Move", V = "Move", O = "Wait", U = "Pick up", B = "Prepare", j = "Dispense", F = "Reload labware", Z = "Retract", I = "Save", X = "Seal pipette", E = "Rail lights", Y = "Status bar", G = "Set tip", J = "Touch tip", Q = "Try probe", K = "Unknown", ee = "Unseal pipette", te = "Tip presence", oe = "Wait", ae = "Wait", ne = "Wait", se = {
+  "absorbanceReader/closeLid": "Close",
+  "absorbanceReader/initialize": "Initialize",
+  "absorbanceReader/openLid": "Open",
+  "absorbanceReader/read": "Read",
+  airGapInPlace: e,
+  aspirate: t,
+  aspirateInPlace: o,
+  aspirateWhileTracking: a,
+  blowOutInPlace: n,
+  blowout: s,
+  "calibration/calibrateGripper": "Calibrate",
+  "calibration/calibrateModule": "Calibrate",
+  "calibration/calibratePipette": "Calibrate",
+  "calibration/moveToMaintenancePosition": "Calibrate",
+  captureImage: _,
+  comment: i,
+  configureForVolume: c,
+  configureNozzleLayout: r,
+  createCSV: l,
+  createTimer: p,
+  csvWriteRow: u,
+  custom: m,
+  delay: d,
+  dispense: g,
+  dispenseInPlace: h,
+  dispenseWhileTracking: w,
+  dropTip: b,
+  dropTipInPlace: f,
+  "flexStacker/closeLatch": "Close",
+  "flexStacker/empty": "Empty",
+  "flexStacker/fill": "Fill",
+  "flexStacker/openLatch": "Open",
+  "flexStacker/prepareShuttle": "Prepare",
+  "flexStacker/retrieve": "Retrieve",
+  "flexStacker/setStoredLabware": "Configure",
+  "flexStacker/store": "Store",
+  getNextTip: v,
+  getTipPresence: k,
+  "heaterShaker/closeLabwareLatch": "Close",
+  "heaterShaker/deactivateHeater": "Deactivate",
+  "heaterShaker/deactivateShaker": "Deactivate",
+  "heaterShaker/openLabwareLatch": "Open",
+  "heaterShaker/setAndWaitForShakeSpeed": "Shake",
+  "heaterShaker/setShakeSpeed": "Shake",
+  "heaterShaker/setTargetTemperature": "Heat",
+  "heaterShaker/waitForTemperature": "Heat",
+  home: $,
+  identifyModule: y,
+  liquidProbe: S,
+  loadLabware: x,
+  loadLid: L,
+  loadLidStack: C,
+  loadLiquid: T,
+  loadLiquidClass: M,
+  loadModule: z,
+  loadPipette: P,
+  "magneticModule/disengage": "Disengage",
+  "magneticModule/engage": "Engage",
+  moveLabware: R,
+  moveRelative: A,
+  moveToAddressableArea: D,
+  moveToAddressableAreaForDropTip: N,
+  moveToCoordinates: W,
+  moveToSlot: q,
+  moveToWell: H,
+  moveTocoordinates: V,
+  pause: O,
+  pickUpTip: U,
+  prepareToAspirate: B,
+  pressureDispense: j,
+  reloadLabware: F,
+  retractAxis: Z,
+  "robot/closeGripperJaw": "Close",
+  "robot/moveAxesRelative": "Move",
+  "robot/moveAxesTo": "Move",
+  "robot/moveTo": "Move",
+  "robot/openGripperJaw": "Open",
+  savePosition: I,
+  sealPipetteToTip: X,
+  setRailLights: E,
+  setStatusBar: Y,
+  setTipState: G,
+  "temperatureModule/deactivate": "Deactivate",
+  "temperatureModule/setTargetTemperature": "Heat or cool",
+  "temperatureModule/waitForTemperature": "Heat or cool",
+  "thermocycler/awaitProfileComplete": "Await cycle",
+  "thermocycler/closeLid": "Close lid",
+  "thermocycler/deactivateBlock": "Deactivate",
+  "thermocycler/deactivateLid": "Deactivate",
+  "thermocycler/openLid": "Open lid",
+  "thermocycler/runExtendedProfile": "Cycle",
+  "thermocycler/runProfile": "Cycle",
+  "thermocycler/setTargetBlockTemperature": "Heat or cool",
+  "thermocycler/setTargetLidTemperature": "Heat or cool",
+  "thermocycler/startRunExtendedProfile": "Start cycle",
+  "thermocycler/waitForBlockTemperature": "Heat or cool",
+  "thermocycler/waitForLidTemperature": "Heat or cool",
+  touchTip: J,
+  tryLiquidProbe: Q,
+  unknown: K,
+  "unsafe/blowOutInPlace": "Unsafe",
+  "unsafe/dropTipInPlace": "Unsafe",
+  "unsafe/engageAxes": "Unsafe",
+  "unsafe/flexStacker/closeLatch": "Unsafe",
+  "unsafe/flexStacker/manualRetrieve": "Unsafe",
+  "unsafe/flexStacker/openLatch": "Unsafe",
+  "unsafe/flexStacker/prepareShuttle": "Unsafe",
+  "unsafe/placeLabware": "Unsafe",
+  "unsafe/ungripLabware": "Unsafe",
+  "unsafe/updatePositionEstimators": "Unsafe",
+  unsealPipetteFromTip: ee,
+  "vacuumModule/closeVent": "Close vent",
+  "vacuumModule/openVent": "Open vent",
+  "vacuumModule/startRunProfile": "Run profile",
+  "vacuumModule/startSetVacuumPower": "Start vacuum power",
+  "vacuumModule/startSetVacuumPressure": "Start vacuum pressure",
+  "vacuumModule/stopVacuum": "Stop vacuum",
+  "vacuumModule/waitForTarget": "Wait for target",
+  verifyTipPresence: te,
+  waitForDuration: oe,
+  waitForResume: ae,
+  waitForTasks: ne
+}, _e = "Absorbance", ie = "Center slot", ce = "Stacker", re = "Stacker + Waste chute", le = "Heater-Shaker", pe = "Left slot", ue = "Mag", me = "Magnetic block", de = "Magnetic Block with Staging Area Slot", ge = "Magnetic Block with Waste Chute Right Adapter Covered", he = "Magnetic Block with Waste Chute Right Adapter No Cover", we = "{{moduleName}} in {{usbPortNumber}}", be = "{{moduleName}} in {{usbPortNumber}} and Magnetic Block", fe = "{{moduleName}} in {{usbPortNumber}} and Waste Chute", ve = "{{moduleName}} in {{usbPortNumber}} and Waste Chute with Cover", ke = "{{moduleName}} and Magnetic Block", $e = "{{moduleName}} with Staging Area Slot", ye = "{{moduleName}} and Waste Chute", Se = "{{moduleName}} and Waste Chute with Cover", xe = "Right slot", Le = "Slot", Ce = "Stage", Te = "Staging area slot", Me = "Staging Area Slot", ze = "Temperature", Pe = "Thermocycler", Re = "Trash bin", Ae = "Vacuum", De = "Waste", Ne = "Waste Chute", We = "Waste Chute with Cover", qe = "Waste Chute with Staging Area Slot", He = "Waste Chute with Staging Area Slot and Cover", Ve = {
+  absorbance: _e,
+  center_slot: ie,
+  flex_stacker_display_name: ce,
+  flex_stacker_waste_chute_display_name: re,
+  heater_Shaker: le,
+  left_slot: pe,
+  mag_block: ue,
+  magnetic_block: me,
+  magnetic_block_with_staging_area_slot: de,
+  magnetic_block_with_waste_chute_right_adapter_covered: ge,
+  magnetic_block_with_waste_chute_right_adapter_no_cover: he,
+  module_in_port: we,
+  module_in_port_and_magnetic_block: be,
+  module_in_port_and_waste_chute: fe,
+  module_in_port_and_waste_chute_with_cover: ve,
+  module_with_mag_block: ke,
+  module_with_staging_area: $e,
+  module_with_waste_chute: ye,
+  module_with_waste_chute_and_cover: Se,
+  right_slot: xe,
+  slot: Le,
+  staging_area: Ce,
+  staging_area_slot: Te,
+  staging_area_slot_title: Me,
+  temperature: ze,
+  thermocycler: Pe,
+  trash_bin: Re,
+  vacuum: Ae,
+  waste: De,
+  waste_chute: Ne,
+  waste_chute_with_cover: We,
+  waste_chute_with_staging_area_slot: qe,
+  waste_chute_with_staging_area_slot_and_cover: He
+}, Oe = "removed", Ue = "Closing Absorbance Reader lid", Be = "Initializing Absorbance Reader to perform {{mode}} measurement at {{wavelengths}}", je = "Opening Absorbance Reader lid", Fe = "Reading plate in Absorbance Reader", Ze = "{{adapter}} on {{module}} in Slot {{slot}}", Ie = "{{adapter}} on {{module}}", Xe = "{{adapter}} in Slot {{slot}}", Ee = "Air gapping {{volume}} µL", Ye = "all nozzles", Ge = "Aspirating {{volume}} µL from well {{well_name}} of {{labware}} in {{labware_location}} at {{flow_rate}} µL/sec", Je = "Aspirating {{volume}} µL in place at {{flow_rate}} µL/sec ", Qe = "Aspirating {{volume}} µL at {{flow_rate}} µL/sec between {{track_from_location}} and {{track_to_location}} of well {{well_name}} of {{labware}} in {{labware_location}}", Ke = "96 channel cam", et = "Blowing out at well {{well_name}} of {{labware}} in {{labware_location}} at {{flow_rate}} µL/sec", tt = "Blowing out {{pipette}} in place at {{flow_rate}} µL/sec", ot = "blue", at = "Calibrating gripper {{jaw}} jaw", nt = "Calibrating {{module}} in slot {{slot}} using adapter {{labware}} on {{mount}}", st = "Calibrating {{pipette}} on {{mount}}", _t = "{{brightness}}% brightness", it = "{{contrast}}% contrast", ct = ", ", rt = "{{width}}x{{height}} resolution", lt = "{{saturation}}% saturation", pt = "Capturing an image.", ut = "Capturing an image with {{options}}.", mt = "{{zoom}}X zoom", dt = "Closing latch on {{module}}", gt = "Closing Thermocycler lid", ht = "Closing Vacuum Module vent", wt = "column layout", bt = "Comment", ft = "Configure {{pipette}} to aspirate {{volume}} µL", vt = "Configure {{pipette}} to use {{layout}}", kt = "confirm", $t = "Confirm and resume", yt = "Create background timer of {{seconds}} seconds", St = "Deactivating shaker", xt = "Deactivating Temperature Module", Lt = "Deactivating heater", Ct = "Deactivating Thermocycler block", Tt = "Deactivating Thermocycler lid", Mt = "{{temp}}°C", zt = "Detecting liquid presence in well {{well_name}} of {{labware}} in {{labware_location}}", Pt = "disco", Rt = "Disengaging Magnetic Module", At = "Dispensing {{volume}} µL into well {{well_name}} of {{labware}} in {{labware_location}} at {{flow_rate}} µL/sec", Dt = "Dispensing {{volume}} µL in place at {{flow_rate}} µL/sec", Nt = "Dispensing {{volume}} µL into well {{well_name}} of {{labware}} in {{labware_location}} at {{flow_rate}} µL/sec and pushing out {{push_out_volume}} µL", Wt = "Dispensing {{volume}} µL at {{flow_rate}} µL/sec between {{track_from_location}} and {{track_to_location}} of well {{well_name}} of {{labware}} in {{labware_location}}", qt = "Dropping tip in {{well_name}} of {{labware}}", Ht = "Dropping tip in place", Vt = "Dropping tip in {{trash}}", Ot = "Empty Stacker", Ut = "Engaging {{axes}} axes", Bt = "Engaging Magnetic Module", jt = "extension jaw", Ft = "extension mount", Zt = "extension Z", It = "Refill Stacker", Xt = "Fixed Trash", Et = "front", Yt = "Calculating position of the next available tip", Gt = "Sensing if calibration tip is attached to {{pipette}}", Jt = "green", Qt = "Homing all gantry, pipette, and plunger axes", Kt = "{{start}} identifying {{model}} in slot {{slot}} {{color}}", eo = "idle", to = "in {{location}}", oo = "Latching labware on Heater-Shaker", ao = "Left", no = "left mount", so = "left plunger", _o = "left Z", io = "Load {{labware}} {{display_location}}", co = "Loading lid", ro = "Load stack of {{quantity}} {{labware}} {{display_location}}", lo = "Reserving new lid stack", po = "Loading {{liquidClassDisplayName}} Liquid Class", uo = "Load {{liquid}} into {{labware}}", mo = "Load {{module}} in Slot {{slot_name}}", go = "Load {{pipette_name}} on {{mount_name}}", ho = "Manually retrieve labware from {{module}}", wo = "{{module}} in Slot {{slot_name}}", bo = "{{module}}", fo = "Move Labware", vo = "Manually move {{labware}} from {{old_location}} to {{new_location}}", ko = "Move labware on {{robot_name}}", $o = "Moving {{labware}} using gripper from {{old_location}} to {{new_location}}", yo = "Clearing lid stack from {{slot_name}}", So = "Allocating {{slot_name}} for lid stack", xo = "Moving {{distance}} mm along {{axis}} axis", Lo = "Moving to {{addressable_area}}", Co = "Moving to {{addressable_area}}", To = "Moving to (X: {{x}}, Y: {{y}}, Z: {{z}})", Mo = "Moving {{mount}} to maintenance position", zo = "Moving to Slot {{slot_name}}", Po = "Moving to X {{xOffset}} Y {{yOffset}} Z {{zOffset}} relative to {{positionRelative}} of well {{wellName}} of {{labware}} in {{displayLocation}}", Ro = "multiple", Ao = "pipette tip attach cam", Do = "notes", No = "off", Wo = "off deck", qo = "offdeck", Ho = "on {{location}}", Vo = "Opening latch on {{module}}", Oo = "Opening Thermocycler lid", Uo = "Opening Vacuum Module vent", Bo = "partial layout", jo = "partial column", Fo = "Pause", Zo = "Pause on {{robot_name}}", Io = "Picking up tip(s) from {{well_range}} of {{labware}} in {{labware_location}}", Xo = "After interruption, placing {{labware}} in {{location}} using gripper", Eo = "Homing shuttle on {{module}}", Yo = "Preparing {{pipette}} to aspirate", Go = "attached", Jo = "Pressurize pipette to dispense {{volume}} µL from resin tip at {{flow_rate}} µL/sec", Qo = "Quantity: {{count}}", Ko = "rear", ea = "red", ta = "Reloading {{labware}}", oa = "Retracting along {{axis}} axis", aa = "Returning tip to {{well_name}} of {{labware}} in {{labware_location}}", na = "Right", sa = "right mount", _a = "right plunger", ia = "right Z", ca = "Closing robot gripper jaw", ra = "Moving robot by {{displacement}}", la = "Moving robot to {{position}}", pa = "Moving {{mount}} to (X: {{x}}, Y: {{y}}, Z: {{z}})", ua = "Opening robot gripper jaw", ma = "row layout", da = "Running Vacuum Module profile with {{elementCount}} total steps and cycles:", ga = "Running Vacuum Module profile", ha = "Saving position", wa = "Sealing to {{labware}} in {{location}}", ba = "Setting Heater-Shaker to shake at {{rpm}} rpm and waiting until reached", fa = "Setting Heater-Shaker to shake at {{rpm}}", va = "Setting status bar animation to {{animation}}", ka = "Setting tips in {{labware}} to {{tip_well_state}}", $a = "Setting Target Temperature of Heater-Shaker to {{temp}}", ya = "Setting Temperature Module to {{temp}} (rounded to nearest integer)", Sa = "Setting Thermocycler block temperature to {{temp}} with hold time of {{hold_time_seconds}} seconds after target reached", xa = "Setting Thermocycler block temperature to {{temp}} in the background", La = "Setting Thermocycler lid temperature to {{temp}}", Ca = "Setting Thermocycler lid temperature to {{temp}} in the background", Ta = "Setting Vacuum Module to {{power}}%", Ma = "Setting Vacuum Module to {{power}}% with hold time of {{hold_time_seconds}} seconds after target reached", za = "Setting Vacuum Module to {{pressure}}mbar", Pa = "Setting Vacuum Module to {{pressure}}mbar with hold time of {{hold_time_seconds}} seconds after target reached", Ra = "single", Aa = "single nozzle layout", Da = "Slot {{slot_name}}", Na = "Stacker {{row}}", Wa = "Starting", qa = "Stopping", Ha = "Stopping Vacuum Module", Va = "target temperature", Oa = "Waiting for Thermocycler profile to complete", Ua = "Temperature: {{celsius}}°C, hold time: {{duration}}", Ba = "Running thermocycler profile with {{elementCount}} total steps and cycles:", ja = "{{repetitions}} repetitions of the following steps:", Fa = "Running thermocycler profile in the background with {{elementCount}} total steps and cycles:", Za = "Running thermocycler profile with {{stepCount}} steps:", Ia = "Touching tip", Xa = "Trash Bin", Ea = "Trash Bin in {{slot_name}}", Ya = "Turning rail lights off", Ga = "Turning rail lights on", Ja = "Homing gripper axis to release labware", Qa = "Unlatching labware on Heater-Shaker", Ka = "Unsealing from {{labware}} in {{location}}", en = "Updating position estimators on {{axes}} axes", tn = "updating", on = "{{repetitions}} repetitions of the following steps:", an = "Power: {{power}}%, hold time: {{duration}}", nn = "Pressure: {{pressure}}mbar, hold time: {{duration}}", sn = "Verifying calibration tip is {{presence}} to {{pipette}} on {{mount}}", _n = "Pausing for {{seconds}} seconds. {{message}}", cn = "Pausing protocol", rn = "Waiting for list of tasks to complete", ln = "Waiting for Heater-Shaker to reach target temperature", pn = "Waiting for Thermocycler block to reach target temperature and holding for specified time", un = "Waiting for Thermocycler lid to reach target temperature", mn = "Waiting for Temperature Module to reach {{temp}}", dn = "Waste Chute", gn = "white", hn = " with {{lidDisplayName}}", wn = "with reference of {{wavelength}} nm", bn = "X", fn = "Y", vn = "yellow", kn = {
+  absent: Oe,
+  absorbance_reader_close_lid: Ue,
+  absorbance_reader_initialize: Be,
+  absorbance_reader_open_lid: je,
+  absorbance_reader_read: Fe,
+  adapter_in_mod_in_slot: Ze,
+  adapter_in_mod_in_slot_plural: Ie,
+  adapter_in_slot: Xe,
+  air_gap_in_place: Ee,
+  all_nozzles: Ye,
+  aspirate: Ge,
+  aspirate_in_place: Je,
+  aspirate_while_tracking: Qe,
+  axis96ChannelCam: Ke,
+  blowout: et,
+  blowout_in_place: tt,
+  blue: ot,
+  calibrate_gripper: at,
+  calibrate_module: nt,
+  calibrate_pipette: st,
+  capture_image_brightness: _t,
+  capture_image_contrast: it,
+  capture_image_list_separator: ct,
+  capture_image_resolution: rt,
+  capture_image_saturation: lt,
+  capture_image_simple: pt,
+  capture_image_with_options: ut,
+  capture_image_zoom: mt,
+  close_latch: dt,
+  closing_tc_lid: gt,
+  closing_vacuum_module_vent: ht,
+  column_layout: wt,
+  comment: bt,
+  configure_for_volume: ft,
+  configure_nozzle_layout: vt,
+  confirm: kt,
+  confirm_and_resume: $t,
+  create_timer: yt,
+  deactivate_hs_shake: St,
+  deactivate_temperature_module: xt,
+  deactivating_hs_heater: Lt,
+  deactivating_tc_block: Ct,
+  deactivating_tc_lid: Tt,
+  degrees_c: Mt,
+  detect_liquid_presence: zt,
+  disco: Pt,
+  disengaging_magnetic_module: Rt,
+  dispense: At,
+  dispense_in_place: Dt,
+  dispense_push_out: Nt,
+  dispense_while_tracking: Wt,
+  drop_tip: qt,
+  drop_tip_in_place: Ht,
+  dropping_tip_in_trash: Vt,
+  empty_stacker: Ot,
+  engage_axes: Ut,
+  engaging_magnetic_module: Bt,
+  extension_jaw: jt,
+  extension_mount: Ft,
+  extension_z: Zt,
+  fill_stacker: It,
+  fixed_trash: Xt,
+  front: Et,
+  get_next_tip: Yt,
+  get_tip_presence: Gt,
+  green: Jt,
+  home_gantry: Qt,
+  identify_module: Kt,
+  idle: eo,
+  in_location: to,
+  latching_hs_latch: oo,
+  left: ao,
+  left_mount: no,
+  left_plunger: so,
+  left_z: _o,
+  load_labware_to_display_location: io,
+  load_lid: co,
+  load_lid_stack: ro,
+  load_lid_stack_empty: lo,
+  load_liquid_class: po,
+  load_liquids_info_protocol_setup: uo,
+  load_module_protocol_setup: mo,
+  load_pipette_protocol_setup: go,
+  manual_retrieve: ho,
+  module_in_slot: wo,
+  module_in_slot_plural: bo,
+  move_labware: fo,
+  move_labware_manually: vo,
+  move_labware_on: ko,
+  move_labware_using_gripper: $o,
+  move_lid_stack_from_deck: yo,
+  move_lid_stack_to_deck: So,
+  move_relative: xo,
+  move_to_addressable_area: Lo,
+  move_to_addressable_area_drop_tip: Co,
+  move_to_coordinates: To,
+  move_to_maintenance_position: Mo,
+  move_to_slot: zo,
+  move_to_well: Po,
+  multiple: Ro,
+  ninety_six_channel_cam: Ao,
+  notes: Do,
+  off: No,
+  off_deck: Wo,
+  offdeck: qo,
+  on_location: Ho,
+  open_latch: Vo,
+  opening_tc_lid: Oo,
+  opening_vacuum_module_vent: Uo,
+  partial_layout: Bo,
+  partial_nozzles: jo,
+  pause: Fo,
+  pause_on: Zo,
+  pickup_tip: Io,
+  place_labware: Xo,
+  prepare_shuttle: Eo,
+  prepare_to_aspirate: Yo,
+  present: Go,
+  pressurizing_to_dispense: Jo,
+  quantity: Qo,
+  rear: Ko,
+  red: ea,
+  reloading_labware: ta,
+  retract_axis: oa,
+  return_tip: aa,
+  right: na,
+  right_mount: sa,
+  right_plunger: _a,
+  right_z: ia,
+  robot_close_gripper_jaw: ca,
+  robot_move_axes_relative: ra,
+  robot_move_axes_to: la,
+  robot_move_to: pa,
+  robot_open_gripper_jaw: ua,
+  row_layout: ma,
+  running_vacuum_module_profile: da,
+  running_vacuum_module_profile_generic: ga,
+  save_position: ha,
+  sealing_to_location: wa,
+  set_and_await_hs_shake: ba,
+  set_hs_shake: fa,
+  set_status_bar: va,
+  set_tip_state: ka,
+  setting_hs_temp: $a,
+  setting_temperature_module_temp: ya,
+  setting_thermocycler_block_temp: Sa,
+  setting_thermocycler_block_temp_in_background: xa,
+  setting_thermocycler_lid_temp: La,
+  setting_thermocycler_lid_temp_in_background: Ca,
+  setting_vacuum_module_power: Ta,
+  setting_vacuum_module_power_with_hold: Ma,
+  setting_vacuum_module_pressure: za,
+  setting_vacuum_module_pressure_with_hold: Pa,
+  single: Ra,
+  single_nozzle_layout: Aa,
+  slot: Da,
+  stacker_hopper_display: Na,
+  starting: Wa,
+  stopping: qa,
+  stopping_vacuum_module: Ha,
+  target_temperature: Va,
+  tc_awaiting_for_duration: Oa,
+  tc_run_profile_steps: Ua,
+  tc_starting_extended_profile: Ba,
+  tc_starting_extended_profile_cycle: ja,
+  tc_starting_extended_profile_in_background: Fa,
+  tc_starting_profile: Za,
+  touch_tip: Ia,
+  trash_bin: Xa,
+  trash_bin_in_slot: Ea,
+  turning_rail_lights_off: Ya,
+  turning_rail_lights_on: Ga,
+  ungrip_labware: Ja,
+  unlatching_hs_latch: Qa,
+  unsealing_from_location: Ka,
+  update_position_estimators: en,
+  updating: tn,
+  vacuum_run_profile_cycle: on,
+  vacuum_run_profile_power_step: an,
+  vacuum_run_profile_pressure_step: nn,
+  verifying_tip_presence: sn,
+  wait_for_duration: _n,
+  wait_for_resume: cn,
+  wait_for_tasks: rn,
+  waiting_for_hs_to_reach: ln,
+  waiting_for_tc_block_to_reach: pn,
+  waiting_for_tc_lid_to_reach: un,
+  waiting_to_reach_temp_module: mn,
+  waste_chute: dn,
+  white: gn,
+  with_lid_name: hn,
+  with_reference_of: wn,
+  x: bn,
+  y: fn,
+  yellow: vn
+}, $n = {
+  command_type_summary: se,
+  deck_configuration: Ve,
+  protocol_command_text: kn
+}, yn = "吸光度", Sn = "中央板位", xn = "外置堆栈", Ln = "外置堆栈 + 外置垃圾槽", Cn = "热震荡模块", Tn = "左侧板位", Mn = "磁性", zn = "环形磁力架", Pn = "环形磁力架和拓展板位", Rn = "带盖的外置垃圾槽右侧拓展板位上的环形磁力架", An = "不带盖的外置垃圾槽右侧拓展板位上的环形磁力架", Dn = "{{usbPortNumber}} 的 {{moduleName}}", Nn = "{{usbPortNumber}} 的 {{moduleName}} 和环形磁力架", Wn = "{{usbPortNumber}} 的 {{moduleName}} 和外置垃圾槽", qn = "{{usbPortNumber}} 的 {{moduleName}} 和带盖外置垃圾槽", Hn = "{{moduleName}} 和环形磁力架", Vn = "拓展板位上的 {{moduleName}}", On = "{{moduleName}}和外置垃圾槽", Un = "{{moduleName}}和带盖外置垃圾槽", Bn = "右侧板位", jn = "板位", Fn = "暂存", Zn = "拓展板位", In = "拓展板位", Xn = "温控模块", En = "热循环模块", Yn = "垃圾桶", Gn = "真空", Jn = "垃圾", Qn = "外置垃圾槽", Kn = "带盖的外置垃圾槽", es = "带拓展板位的外置垃圾槽", ts = "带拓展板位的带盖外置垃圾槽", os = {
+  absorbance: yn,
+  center_slot: Sn,
+  flex_stacker_display_name: xn,
+  flex_stacker_waste_chute_display_name: Ln,
+  heater_Shaker: Cn,
+  left_slot: Tn,
+  mag_block: Mn,
+  magnetic_block: zn,
+  magnetic_block_with_staging_area_slot: Pn,
+  magnetic_block_with_waste_chute_right_adapter_covered: Rn,
+  magnetic_block_with_waste_chute_right_adapter_no_cover: An,
+  module_in_port: Dn,
+  module_in_port_and_magnetic_block: Nn,
+  module_in_port_and_waste_chute: Wn,
+  module_in_port_and_waste_chute_with_cover: qn,
+  module_with_mag_block: Hn,
+  module_with_staging_area: Vn,
+  module_with_waste_chute: On,
+  module_with_waste_chute_and_cover: Un,
+  right_slot: Bn,
+  slot: jn,
+  staging_area: Fn,
+  staging_area_slot: Zn,
+  staging_area_slot_title: In,
+  temperature: Xn,
+  thermocycler: En,
+  trash_bin: Yn,
+  vacuum: Gn,
+  waste: Jn,
+  waste_chute: Qn,
+  waste_chute_with_cover: Kn,
+  waste_chute_with_staging_area_slot: es,
+  waste_chute_with_staging_area_slot_and_cover: ts
+}, as = "正在关闭吸光度读数器盖子", ns = "正在初始化吸光度读数器，以便在{{wavelengths}}波长下执行{{mode}}测量", ss = "正在打开吸光度读数器盖子", _s = "正在吸光度读数器中读取微孔板", is = "{{adapter}}在{{slot}}的{{module}}上", cs = "{{adapter}} 在 {{module}}上", rs = "{{adapter}}在{{slot}}上", ls = "正在形成 {{volume}} µL 的空气间隙", ps = "所有移液喷嘴", us = "从{{labware_location}}的{{labware}}的{{well_name}}孔中以{{flow_rate}}µL/s的速度吸液{{volume}}µL", ms = "在原位以{{flow_rate}}µL/s的速度吸液{{volume}}µL", ds = "在 {{labware_location}} 的 {{labware}} 的孔位 {{well_name}} 的 {{track_from_location}} 和 {{track_to_location}} 之间以 {{flow_rate}} µL/秒的速度吸取 {{volume}} µL。", gs = "在{{labware_location}}的{{labware}}的{{well_name}}孔中以{{flow_rate}}µL/s的速度排空", hs = "在原位以{{flow_rate}}µL/s的速度排空", ws = "{{brightness}}% 亮度", bs = "{{contrast}}% 对比度", fs = "，", vs = "{{width}}x{{height}} 分辨率", ks = "{{saturation}}% 饱和度", $s = "正在拍摄图像。", ys = "使用 {{options}} 拍摄图像。", Ss = "{{zoom}}X 变焦", xs = "正在关闭热循环仪热盖", Ls = "列布局", Cs = "注释", Ts = "配置{{pipette}}以吸液{{volume}}µL", Ms = "配置{{pipette}}以使用{{amount}}个通道", zs = "确认并继续", Ps = "创建一个 {{seconds}} 秒的后台计时器", Rs = "停止振荡", As = "停用温控模块", Ds = "停止加热", Ns = "停止热循环仪底座温控", Ws = "停止热循环仪热盖", qs = "{{temp}}°C", Hs = "正在检测{{labware}}在{{labware_location}}中的{{well_name}}孔中的液体存在", Vs = "磁力模块下降中", Os = "以{{flow_rate}}µL/s的速度将{{volume}}µL 排液至{{labware_location}}的{{labware}}的{{well_name}}孔中", Us = "在原位以{{flow_rate}}µL/s的速度排液{{volume}}µL", Bs = "以{{flow_rate}}µL/s的速度将{{volume}}µL 排液至{{labware_location}}的{{labware}}的{{well_name}}孔中，并推出{{push_out_volume}}µL", js = "在 {{labware_location}} 的 {{labware}} 中，从孔位的{{track_from_location}} 到 {{track_to_location}} {{well_name}}处，以 {{flow_rate}} µL/秒的速度排出 {{volume}} µL", Fs = "将吸头丢入{{labware}}的{{well_name}}孔中", Zs = "在原位丢弃吸头", Is = "将吸头丢入{{trash}}", Xs = "清空堆栈", Es = "磁力模块抬升中", Ys = "转板抓手", Gs = "抓手安装支架", Js = "扩展 Z轴", Qs = "补充堆栈", Ks = "垃圾桶", e_ = "计算下一个可用吸头的位置", t_ = "复位所有龙门架、移液器和柱塞轴", o_ = "在{{location}}", a_ = "在热震荡模块上锁定实验耗材", n_ = "左", s_ = "左侧移液器安装位", __ = "左侧柱塞", i_ = "左侧Z轴", c_ = "{{display_location}}加载{{labware}}", r_ = "加载盖子", l_ = "加载 {{quantity}} {{labware}} {{display_location}}堆栈", p_ = "预留新盖子堆叠架", u_ = "{{liquidClassDisplayName}} 液体类型加载中", m_ = "将{{liquid}}加载到{{labware}}中", d_ = "在{{slot_name}}板位中加载模块{{module}}", g_ = "在{{mount_name}}支架上加载{{pipette_name}}", h_ = "{{module}}在{{slot_name}}板位", w_ = "{{module}}", b_ = "移动实验耗材", f_ = "手动将{{labware}}从{{old_location}}移动到{{new_location}}", v_ = "在{{robot_name}}上移动实验耗材", k_ = "使用转板抓手将{{labware}}从{{old_location}}移动到{{new_location}}", $_ = "清空 {{slot_name}} 盖子堆叠架", y_ = "设置 {{slot_name}} 为盖子堆叠架", S_ = "沿{{axis}}轴移动{{distance}}毫米", x_ = "移动到{{addressable_area}}", L_ = "移动到{{addressable_area}}", C_ = "移动到 (X:{{x}}, Y:{{y}}, Z:{{z}})", T_ = "移动到{{slot_name}}号板位", M_ = "正在移动到{{displayLocation}}中{{labware}}的{{wellName}}孔的{{positionRelative}}的偏移 X {{xOffset}} Y {{yOffset}} Z {{zOffset}}", z_ = "多个", P_ = "移液器吸头齿条夹持结构", R_ = "备注", A_ = "甲板外", D_ = "甲板外", N_ = "在{{location}}", W_ = "正在打开热循环仪热盖", q_ = "部分布局", H_ = "部分列", V_ = "暂停", O_ = "在{{robot_name}}上暂停", U_ = "从{{labware_location}}的{{labware}}的{{well_range}}孔中拾取吸头", B_ = "准备使用{{pipette}}吸液", j_ = "向移液管施压，以 {{flow_rate}} µL/秒的流速从树脂吸头中排出 {{volume}} µL", F_ = "数量：{{count}}", Z_ = "正在重新加载{{labware}}", I_ = "将吸头返回到{{labware_location}}的{{labware}}的{{well_name}}孔中", X_ = "右", E_ = "右侧移液器安装位", Y_ = "右侧柱塞", G_ = "右侧 Z 轴", J_ = "正在闭合机器人抓手夹片", Q_ = "设备移动 {{displacement}}", K_ = "设备移动到 {{position}}", ei = "移动{{mount}}至(X: {{x}}, Y: {{y}}, Z: {{z}})", ti = "正在打开机器人抓手夹片", oi = "行布局", ai = "正在保存位置", ni = "密封至 {{labware}} 在 {{location}}", si = "设置热震荡模块以{{rpm}}rpm 震动并等待达到该转速", _i = "将加热振荡器设置为以 {{rpm}} 转速震动", ii = "将 {{labware}} 中的吸头设置为 {{tip_well_state}} 状态", ci = "将热震荡模块的目标温度设置为{{temp}}", ri = "将温控模块设置为{{temp}}（四舍五入到最接近的整数）", li = "将热循环仪加热块温度设置为{{temp}}，并在达到目标后保持{{hold_time_seconds}}s", pi = "在后台将热循环模块底座的温度设置为 {{temp}}", ui = "将热循环仪热盖温度设置为{{temp}}", mi = "在后台将热循环仪上盖的温度设置为 {{temp}}", di = "单个", gi = "单个移液喷嘴布局", hi = "{{slot_name}}板位", wi = "堆栈 {{row}}", bi = "目标温度", fi = "等待热循环仪程序完成", vi = "温度：{{celsius}}°C，时间：{{seconds}}s", ki = "运行热循环仪程序，共有{{elementCount}}个步骤和循环：", $i = "以下步骤重复{{repetitions}}次：", yi = "在后台运行热循环仪的程序，共有 {{elementCount}} 步和循环：", Si = "正在运行热循环仪程序，包含 {{stepCount}} 个步骤：", xi = "吸头正在触碰孔壁", Li = "垃圾桶", Ci = "垃圾桶在{{slot_name}}", Ti = "正在关闭轨道灯", Mi = "正在打开轨道灯", zi = "正在解锁热震荡模块上的实验耗材", Pi = "在{{location}}对{{labware}}进行开封操作", Ri = "暂停{{seconds}}s。{{message}}", Ai = "暂停协议", Di = "等待任务列表完成", Ni = "等待热震荡模块达到目标温度", Wi = "等待热循环仪加热块达到目标温度并保持指定时间", qi = "等待热循环仪热盖达到目标温度", Hi = "等待温控模块达到{{temp}}", Vi = "外置垃圾槽", Oi = "带有 {{lidDisplayName}}", Ui = "以{{wavelength}} nm为参考波长", Bi = {
+  absorbance_reader_close_lid: as,
+  absorbance_reader_initialize: ns,
+  absorbance_reader_open_lid: ss,
+  absorbance_reader_read: _s,
+  adapter_in_mod_in_slot: is,
+  adapter_in_mod_in_slot_plural: cs,
+  adapter_in_slot: rs,
+  air_gap_in_place: ls,
+  all_nozzles: ps,
+  aspirate: us,
+  aspirate_in_place: ms,
+  aspirate_while_tracking: ds,
+  blowout: gs,
+  blowout_in_place: hs,
+  capture_image_brightness: ws,
+  capture_image_contrast: bs,
+  capture_image_list_separator: fs,
+  capture_image_resolution: vs,
+  capture_image_saturation: ks,
+  capture_image_simple: $s,
+  capture_image_with_options: ys,
+  capture_image_zoom: Ss,
+  closing_tc_lid: xs,
+  column_layout: Ls,
+  comment: Cs,
+  configure_for_volume: Ts,
+  configure_nozzle_layout: Ms,
+  confirm_and_resume: zs,
+  create_timer: Ps,
+  deactivate_hs_shake: Rs,
+  deactivate_temperature_module: As,
+  deactivating_hs_heater: Ds,
+  deactivating_tc_block: Ns,
+  deactivating_tc_lid: Ws,
+  degrees_c: qs,
+  detect_liquid_presence: Hs,
+  disengaging_magnetic_module: Vs,
+  dispense: Os,
+  dispense_in_place: Us,
+  dispense_push_out: Bs,
+  dispense_while_tracking: js,
+  drop_tip: Fs,
+  drop_tip_in_place: Zs,
+  dropping_tip_in_trash: Is,
+  empty_stacker: Xs,
+  engaging_magnetic_module: Es,
+  extension_jaw: Ys,
+  extension_mount: Gs,
+  extension_z: Js,
+  fill_stacker: Qs,
+  fixed_trash: Ks,
+  get_next_tip: e_,
+  home_gantry: t_,
+  in_location: o_,
+  latching_hs_latch: a_,
+  left: n_,
+  left_mount: s_,
+  left_plunger: __,
+  left_z: i_,
+  load_labware_to_display_location: c_,
+  load_lid: r_,
+  load_lid_stack: l_,
+  load_lid_stack_empty: p_,
+  load_liquid_class: u_,
+  load_liquids_info_protocol_setup: m_,
+  load_module_protocol_setup: d_,
+  load_pipette_protocol_setup: g_,
+  module_in_slot: h_,
+  module_in_slot_plural: w_,
+  move_labware: b_,
+  move_labware_manually: f_,
+  move_labware_on: v_,
+  move_labware_using_gripper: k_,
+  move_lid_stack_from_deck: $_,
+  move_lid_stack_to_deck: y_,
+  move_relative: S_,
+  move_to_addressable_area: x_,
+  move_to_addressable_area_drop_tip: L_,
+  move_to_coordinates: C_,
+  move_to_slot: T_,
+  move_to_well: M_,
+  multiple: z_,
+  ninety_six_channel_cam: P_,
+  notes: R_,
+  off_deck: A_,
+  offdeck: D_,
+  on_location: N_,
+  opening_tc_lid: W_,
+  partial_layout: q_,
+  partial_nozzles: H_,
+  pause: V_,
+  pause_on: O_,
+  pickup_tip: U_,
+  prepare_to_aspirate: B_,
+  pressurizing_to_dispense: j_,
+  quantity: F_,
+  reloading_labware: Z_,
+  return_tip: I_,
+  right: X_,
+  right_mount: E_,
+  right_plunger: Y_,
+  right_z: G_,
+  robot_close_gripper_jaw: J_,
+  robot_move_axes_relative: Q_,
+  robot_move_axes_to: K_,
+  robot_move_to: ei,
+  robot_open_gripper_jaw: ti,
+  row_layout: oi,
+  save_position: ai,
+  sealing_to_location: ni,
+  set_and_await_hs_shake: si,
+  set_hs_shake: _i,
+  set_tip_state: ii,
+  setting_hs_temp: ci,
+  setting_temperature_module_temp: ri,
+  setting_thermocycler_block_temp: li,
+  setting_thermocycler_block_temp_in_background: pi,
+  setting_thermocycler_lid_temp: ui,
+  setting_thermocycler_lid_temp_in_background: mi,
+  single: di,
+  single_nozzle_layout: gi,
+  slot: hi,
+  stacker_hopper_display: wi,
+  target_temperature: bi,
+  tc_awaiting_for_duration: fi,
+  tc_run_profile_steps: vi,
+  tc_starting_extended_profile: ki,
+  tc_starting_extended_profile_cycle: $i,
+  tc_starting_extended_profile_in_background: yi,
+  tc_starting_profile: Si,
+  touch_tip: xi,
+  trash_bin: Li,
+  trash_bin_in_slot: Ci,
+  turning_rail_lights_off: Ti,
+  turning_rail_lights_on: Mi,
+  unlatching_hs_latch: zi,
+  unsealing_from_location: Pi,
+  wait_for_duration: Ri,
+  wait_for_resume: Ai,
+  wait_for_tasks: Di,
+  waiting_for_hs_to_reach: Ni,
+  waiting_for_tc_block_to_reach: Wi,
+  waiting_for_tc_lid_to_reach: qi,
+  waiting_to_reach_temp_module: Hi,
+  waste_chute: Vi,
+  with_lid_name: Oi,
+  with_reference_of: Ui
+}, ji = {
+  deck_configuration: os,
+  protocol_command_text: Bi
+}, Fi = {
+  en: $n,
+  zh: ji
+};
+export {
+  Fi as resources,
+  $n as shared_en_resources,
+  ji as shared_zh_resources
+};

package/lib/primitives/style-props.d.ts

@@ -1,7 +1,7 @@
 import type { CSSProperties } from 'react';
 import type * as Types from './types';
 type Text = string | number;
-export declare const STYLE_PROPS: ("top" | "bottom" | "left" | "right" | "height" | "filter" | "width" | "position" | "overflow" | "overflowX" | "overflowY" | "cursor" | "transformOrigin" | "color" | "backgroundColor" | "opacity" | "fontSize" | "fontWeight" | "fontStyle" | "lineHeight" | "textAlign" | "textTransform" | "textDecoration" | "textOverflow" | "margin" | "marginX" | "marginY" | "marginTop" | "marginRight" | "marginBottom" | "marginLeft" | "padding" | "paddingX" | "paddingY" | "paddingTop" | "paddingRight" | "paddingBottom" | "paddingLeft" | "border" | "borderTop" | "borderRight" | "borderBottom" | "borderLeft" | "borderRadius" | "borderWidth" | "borderColor" | "boxShadow" | "flex" | "alignItems" | "alignSelf" | "alignContent" | "justifyContent" | "justifyItems" | "justifySelf" | "flexDirection" | "flexWrap" | "flexGrow" | "whiteSpace" | "columnGap" | "gridGap" | "gap" | "gridTemplateAreas" | "gridTemplateRows" | "gridTemplateColumns" | "gridArea" | "gridRow" | "gridColumn" | "display" | "visibility" | "size" | "minWidth" | "maxWidth" | "minHeight" | "maxHeight" | "wordSpacing" | "overflowWrap" | "zIndex" | "transform" | "rowGap" | "transition")[];
+export declare const STYLE_PROPS: ("top" | "bottom" | "left" | "right" | "height" | "filter" | "position" | "width" | "overflow" | "overflowX" | "overflowY" | "cursor" | "transformOrigin" | "color" | "backgroundColor" | "opacity" | "fontSize" | "fontWeight" | "fontStyle" | "lineHeight" | "textAlign" | "textTransform" | "textDecoration" | "textOverflow" | "margin" | "marginX" | "marginY" | "marginTop" | "marginRight" | "marginBottom" | "marginLeft" | "padding" | "paddingX" | "paddingY" | "paddingTop" | "paddingRight" | "paddingBottom" | "paddingLeft" | "border" | "borderTop" | "borderRight" | "borderBottom" | "borderLeft" | "borderRadius" | "borderWidth" | "borderColor" | "boxShadow" | "flex" | "alignItems" | "alignSelf" | "alignContent" | "justifyContent" | "justifyItems" | "justifySelf" | "flexDirection" | "flexWrap" | "flexGrow" | "whiteSpace" | "columnGap" | "gridGap" | "gap" | "gridTemplateAreas" | "gridTemplateRows" | "gridTemplateColumns" | "gridArea" | "gridRow" | "gridColumn" | "display" | "visibility" | "size" | "minWidth" | "maxWidth" | "minHeight" | "maxHeight" | "wordSpacing" | "overflowWrap" | "zIndex" | "transform" | "rowGap" | "transition")[];
 export declare const styleProps: (props: Types.StyleProps) => CSSProperties;
 export declare const isntStyleProp: (prop: string | Text) => boolean;
 export {};