@opentrons/components 0.2.0-alpha.0 → 0.2.0-alpha.1

package/src/assets/localization/en/deck_configuration.json

@@ -1,12 +0,0 @@
-{
-  "flex_stacker_display_name": "Stacker",
-  "flex_stacker_waste_chute_display_name": "Stacker + Waste chute",
-  "absorbance": "Absorbance",
-  "heater_Shaker": "Heater-Shaker",
-  "mag_block": "Mag",
-  "staging_area": "Stage",
-  "temperature": "Temperature",
-  "thermocycler": "Thermocycler",
-  "trash_bin": "Trash bin",
-  "waste": "Waste"
-}

package/src/assets/localization/en/index.ts

@@ -1,10 +0,0 @@
-import deck_configuration from './deck_configuration.json'
-import protocol_command_text from './protocol_command_text.json'
-
-// i18n files needed for unit testing. this is the quick fix for now until we figure out
-// one source of truth for sharing the protocol_command_text
-// translation across multiple projects
-export const en = {
-  protocol_command_text,
-  deck_configuration,
-}

package/src/assets/localization/en/protocol_command_text.json

@@ -1,116 +0,0 @@
-{
-  "absorbance_reader_close_lid": "Closing Absorbance Reader lid",
-  "absorbance_reader_initialize": "Initializing Absorbance Reader to perform {{mode}} measurement at {{wavelengths}}",
-  "absorbance_reader_open_lid": "Opening Absorbance Reader lid",
-  "absorbance_reader_read": "Reading plate in Absorbance Reader",
-  "adapter_in_mod_in_slot": "{{adapter}} on {{module}} in Slot {{slot}}",
-  "adapter_in_slot": "{{adapter}} in Slot {{slot}}",
-  "air_gap_in_place": "Air gapping {{volume}} µL",
-  "all_nozzles": "all nozzles",
-  "aspirate": "Aspirating {{volume}} µL from well {{well_name}} of {{labware}} in {{labware_location}} at {{flow_rate}} µL/sec",
-  "aspirate_in_place": "Aspirating {{volume}} µL in place at {{flow_rate}} µL/sec ",
-  "blowout": "Blowing out at well {{well_name}} of {{labware}} in {{labware_location}} at {{flow_rate}} µL/sec",
-  "blowout_in_place": "Blowing out in place at {{flow_rate}} µL/sec",
-  "closing_tc_lid": "Closing Thermocycler lid",
-  "column_layout": "column layout",
-  "comment": "Comment",
-  "configure_for_volume": "Configure {{pipette}} to aspirate {{volume}} µL",
-  "configure_nozzle_layout": "Configure {{pipette}} to use {{layout}}",
-  "confirm_and_resume": "Confirm and resume",
-  "deactivate_hs_shake": "Deactivating shaker",
-  "deactivate_temperature_module": "Deactivating Temperature Module",
-  "deactivating_hs_heater": "Deactivating heater",
-  "deactivating_tc_block": "Deactivating Thermocycler block",
-  "deactivating_tc_lid": "Deactivating Thermocycler lid",
-  "degrees_c": "{{temp}}°C",
-  "detect_liquid_presence": "Detecting liquid presence in well {{well_name}} of {{labware}} in {{labware_location}}",
-  "disengaging_magnetic_module": "Disengaging Magnetic Module",
-  "dispense": "Dispensing {{volume}} µL into well {{well_name}} of {{labware}} in {{labware_location}} at {{flow_rate}} µL/sec",
-  "dispense_in_place": "Dispensing {{volume}} µL in place at {{flow_rate}} µL/sec",
-  "dispense_push_out": "Dispensing {{volume}} µL into well {{well_name}} of {{labware}} in {{labware_location}} at {{flow_rate}} µL/sec and pushing out {{push_out_volume}} µL",
-  "drop_tip": "Dropping tip in {{well_name}} of {{labware}}",
-  "drop_tip_in_place": "Dropping tip in place",
-  "dropping_tip_in_trash": "Dropping tip in {{trash}}",
-  "engaging_magnetic_module": "Engaging Magnetic Module",
-  "extension_mount": "extension mount",
-  "extension_z": "extension Z",
-  "extension_jaw": "extension jaw",
-  "fixed_trash": "Fixed Trash",
-  "get_next_tip": "Calculating position of the next available tip",
-  "home_gantry": "Homing all gantry, pipette, and plunger axes",
-  "in_location": "in {{location}}",
-  "latching_hs_latch": "Latching labware on Heater-Shaker",
-  "left": "Left",
-  "left_mount": "left mount",
-  "left_plunger": "left plunger",
-  "left_z": "left Z",
-  "load_labware_to_display_location": "Load {{labware}} {{display_location}}",
-  "load_liquid_class": "Loading {{liquidClassDisplayName}} Liquid Class",
-  "load_liquids_info_protocol_setup": "Load {{liquid}} into {{labware}}",
-  "load_module_protocol_setup": "Load {{module}} in Slot {{slot_name}}",
-  "load_pipette_protocol_setup": "Load {{pipette_name}} in {{mount_name}} Mount",
-  "module_in_slot": "{{module}} in Slot {{slot_name}}",
-  "module_in_slot_plural": "{{module}}",
-  "move_labware": "Move Labware",
-  "move_labware_manually": "Manually move {{labware}} from {{old_location}} to {{new_location}}",
-  "move_labware_on": "Move labware on {{robot_name}}",
-  "move_labware_using_gripper": "Moving {{labware}} using gripper from {{old_location}} to {{new_location}}",
-  "move_relative": "Moving {{distance}} mm along {{axis}} axis",
-  "move_to_addressable_area": "Moving to {{addressable_area}}",
-  "move_to_addressable_area_drop_tip": "Moving to {{addressable_area}}",
-  "move_to_coordinates": "Moving to (X: {{x}}, Y: {{y}}, Z: {{z}})",
-  "move_to_slot": "Moving to Slot {{slot_name}}",
-  "move_to_well": "Moving to X {{xOffset}} Y {{yOffset}} Z {{zOffset}} relative to {{positionRelative}} of well {{wellName}} of {{labware}} in {{displayLocation}}",
-  "multiple": "multiple",
-  "notes": "notes",
-  "off_deck": "off deck",
-  "offdeck": "offdeck",
-  "on_location": "on {{location}}",
-  "opening_tc_lid": "Opening Thermocycler lid",
-  "pause": "Pause",
-  "pause_on": "Pause on {{robot_name}}",
-  "partial_layout": "partial layout",
-  "pickup_tip": "Picking up tip(s) from {{well_range}} of {{labware}} in {{labware_location}}",
-  "prepare_to_aspirate": "Preparing {{pipette}} to aspirate",
-  "reloading_labware": "Reloading {{labware}}",
-  "return_tip": "Returning tip to {{well_name}} of {{labware}} in {{labware_location}}",
-  "right": "Right",
-  "right_mount": "right mount",
-  "right_plunger": "right plunger",
-  "right_z": "right Z",
-  "robot_close_gripper_jaw": "Closing robot gripper jaw",
-  "robot_move_to": "Moving {{mount}} to (X: {{x}}, Y: {{y}}, Z: {{z}})",
-  "robot_move_axes_relative": "Moving robot by {{displacement}}",
-  "robot_move_axes_to": "Moving robot to {{position}}",
-  "robot_open_gripper_jaw": "Opening robot gripper jaw",
-  "row_layout": "row layout",
-  "save_position": "Saving position",
-  "set_and_await_hs_shake": "Setting Heater-Shaker to shake at {{rpm}} rpm and waiting until reached",
-  "setting_hs_temp": "Setting Target Temperature of Heater-Shaker to {{temp}}",
-  "setting_temperature_module_temp": "Setting Temperature Module to {{temp}} (rounded to nearest integer)",
-  "setting_thermocycler_block_temp": "Setting Thermocycler block temperature to {{temp}} with hold time of {{hold_time_seconds}} seconds after target reached",
-  "setting_thermocycler_lid_temp": "Setting Thermocycler lid temperature to {{temp}}",
-  "single": "single",
-  "single_nozzle_layout": "single nozzle layout",
-  "slot": "Slot {{slot_name}}",
-  "target_temperature": "target temperature",
-  "tc_awaiting_for_duration": "Waiting for Thermocycler profile to complete",
-  "tc_run_profile_steps": "Temperature: {{celsius}}°C, hold time: {{duration}}",
-  "tc_starting_extended_profile": "Running thermocycler profile with {{elementCount}} total steps and cycles:",
-  "tc_starting_extended_profile_cycle": "{{repetitions}} repetitions of the following steps:",
-  "tc_starting_profile": "Running thermocycler profile with {{stepCount}} steps:",
-  "touch_tip": "Touching tip",
-  "trash_bin": "Trash Bin",
-  "trash_bin_in_slot": "Trash Bin in {{slot_name}}",
-  "turning_rail_lights_off": "Turning rail lights off",
-  "turning_rail_lights_on": "Turning rail lights on",
-  "unlatching_hs_latch": "Unlatching labware on Heater-Shaker",
-  "wait_for_duration": "Pausing for {{seconds}} seconds. {{message}}",
-  "wait_for_resume": "Pausing protocol",
-  "waiting_for_hs_to_reach": "Waiting for Heater-Shaker to reach target temperature",
-  "waiting_for_tc_block_to_reach": "Waiting for Thermocycler block to reach target temperature and holding for specified time",
-  "waiting_for_tc_lid_to_reach": "Waiting for Thermocycler lid to reach target temperature",
-  "waiting_to_reach_temp_module": "Waiting for Temperature Module to reach {{temp}}",
-  "waste_chute": "Waste Chute",
-  "with_reference_of": "with reference of {{wavelength}} nm"
-}

package/src/assets/localization/index.ts

@@ -1,7 +0,0 @@
-import { en } from './en'
-import { zh } from './zh'
-
-export const resources = {
-  en,
-  zh,
-}

package/src/assets/localization/zh/index.ts

@@ -1,8 +0,0 @@
-import protocol_command_text from './protocol_command_text.json'
-
-// i18n files needed for unit testing. this is the quick fix for now until we figure out
-// one source of truth for sharing the protocol_command_text
-// translation across multiple projects
-export const zh = {
-  protocol_command_text,
-}

package/src/assets/localization/zh/protocol_command_text.json

@@ -1,80 +0,0 @@
-{
-  "adapter_in_mod_in_slot": "{{adapter}}在{{slot}}的{{module}}上",
-  "adapter_in_slot": "{{adapter}}在{{slot}}上",
-  "aspirate": "从{{labware_location}}的{{labware}}的{{well_name}}孔中以{{flow_rate}}µL/秒的速度吸液{{volume}}µL",
-  "aspirate_in_place": "在原位以{{flow_rate}}µL/秒的速度吸液{{volume}}µL",
-  "blowout": "在{{labware_location}}的{{labware}}的{{well_name}}孔中以{{flow_rate}}µL/秒的速度排空",
-  "blowout_in_place": "在原位以{{flow_rate}}µL/秒的速度排空",
-  "closing_tc_lid": "关闭热循环仪热盖",
-  "comment": "解释",
-  "configure_for_volume": "配置{{pipette}}以吸液{{volume}}µL",
-  "configure_nozzle_layout": "配置{{pipette}}以使用{{amount}}个通道",
-  "confirm_and_resume": "确认并继续",
-  "deactivate_hs_shake": "停用震荡功能",
-  "deactivate_temperature_module": "停用温控模块",
-  "deactivating_hs_heater": "停用加热功能",
-  "deactivating_tc_block": "停用热循环仪温控功能",
-  "deactivating_tc_lid": "停用热循环仪热盖功能",
-  "degrees_c": "{{temp}}°C",
-  "detect_liquid_presence": "正在检测{{labware}}在{{labware_location}}中的{{well_name}}孔中的液体存在",
-  "disengaging_magnetic_module": "下降磁力架模块",
-  "dispense_push_out": "以{{flow_rate}}µL/秒的速度将{{volume}}µL 排液至{{labware_location}}的{{labware}}的{{well_name}}孔中，并推出{{push_out_volume}}µL",
-  "dispense": "以{{flow_rate}}µL/秒的速度将{{volume}}µL 排液至{{labware_location}}的{{labware}}的{{well_name}}孔中",
-  "dispense_in_place": "在原位以{{flow_rate}}µL/秒的速度排液{{volume}}µL",
-  "drop_tip": "将吸头丢入{{labware}}的{{well_name}}孔中",
-  "drop_tip_in_place": "在原位丢弃吸头",
-  "engaging_magnetic_module": "抬升磁力架模块",
-  "fixed_trash": "垃圾桶",
-  "home_gantry": "复位所有龙门架、移液器和柱塞轴",
-  "latching_hs_latch": "在热震荡模块上锁定实验耗材",
-  "left": "左",
-  "load_liquids_info_protocol_setup": "将{{liquid}}加载到{{labware}}中",
-  "load_module_protocol_setup": "在甲板槽{{slot_name}}中加载模块{{module}}",
-  "load_pipette_protocol_setup": "在{{mount_name}}支架上加载{{pipette_name}}",
-  "module_in_slot_plural": "{{module}}",
-  "module_in_slot": "{{module}}在{{slot_name}}号板位",
-  "move_labware_manually": "手动将{{labware}}从{{old_location}}移动到{{new_location}}",
-  "move_labware_on": "在{{robot_name}}上移动实验耗材",
-  "move_labware_using_gripper": "使用转板抓手将{{labware}}从{{old_location}}移动到{{new_location}}",
-  "move_labware": "移动实验耗材",
-  "move_relative": "沿{{axis}}轴移动{{distance}}毫米",
-  "move_to_coordinates": "移动到 (X:{{x}}, Y:{{y}}, Z:{{z}})",
-  "move_to_slot": "移动到{{slot_name}}号板位",
-  "move_to_well": "移动到{{labware_location}}的{{labware}}的{{well_name}}孔",
-  "move_to_addressable_area": "移动到{{addressable_area}}",
-  "move_to_addressable_area_drop_tip": "移动到{{addressable_area}}",
-  "notes": "备注",
-  "off_deck": "甲板外",
-  "offdeck": "甲板外",
-  "opening_tc_lid": "打开热循环仪热盖",
-  "pause_on": "在{{robot_name}}上暂停",
-  "pause": "暂停",
-  "pickup_tip": "从{{labware_location}}的{{labware}}的{{well_range}}孔中拾取吸头",
-  "prepare_to_aspirate": "准备使用{{pipette}}吸液",
-  "reloading_labware": "正在重新加载{{labware}}",
-  "return_tip": "将吸头返回到{{labware_location}}的{{labware}}的{{well_name}}孔中",
-  "right": "右",
-  "save_position": "保存位置",
-  "set_and_await_hs_shake": "设置热震荡模块以{{rpm}}rpm 震动并等待达到该转速",
-  "setting_hs_temp": "将热震荡模块的目标温度设置为{{temp}}",
-  "setting_temperature_module_temp": "将温控模块设置为{{temp}}（四舍五入到最接近的整数）",
-  "setting_thermocycler_block_temp": "将热循环仪加热块温度设置为{{temp}}，并在达到目标后保持{{hold_time_seconds}}秒",
-  "setting_thermocycler_lid_temp": "将热循环仪热盖温度设置为{{temp}}",
-  "slot": "板位{{slot_name}}",
-  "target_temperature": "目标温度",
-  "tc_awaiting_for_duration": "等待热循环仪程序完成",
-  "tc_run_profile_steps": "温度：{{celsius}}°C，时间：{{seconds}}秒",
-  "tc_starting_profile": "热循环仪开始进行由以下步骤组成的{{repetitions}}次循环：",
-  "trash_bin_in_slot": "垃圾桶在{{slot_name}}",
-  "touch_tip": "吸头接触内壁",
-  "turning_rail_lights_off": "正在关闭导轨灯",
-  "turning_rail_lights_on": "正在打开导轨灯",
-  "unlatching_hs_latch": "解锁热震荡模块上的实验耗材",
-  "wait_for_duration": "暂停{{seconds}}秒。{{message}}",
-  "wait_for_resume": "暂停协议",
-  "waiting_for_hs_to_reach": "等待热震荡模块达到目标温度",
-  "waiting_for_tc_block_to_reach": "等待热循环仪加热块达到目标温度并保持指定时间",
-  "waiting_for_tc_lid_to_reach": "等待热循环仪热盖达到目标温度",
-  "waiting_to_reach_temp_module": "等待温控模块达到{{temp}}",
-  "waste_chute": "外置垃圾槽"
-}

package/src/atoms/AnimationVideo/__tests__/AnimationVideo.test.tsx

@@ -1,40 +0,0 @@
-import { render, screen } from '@testing-library/react'
-import { describe, expect, it } from 'vitest'
-
-import { AnimationVideo } from '..'
-
-describe('AnimationVideo', () => {
-  it('should have default props', () => {
-    render(<AnimationVideo data-testid="subject" />)
-    const videoNode = screen.getByTestId('subject')
-    expect(videoNode).toHaveAttribute('autoplay')
-    expect(videoNode).toHaveAttribute('loop')
-    expect(videoNode).not.toHaveAttribute('controls')
-    expect(videoNode).toHaveAttribute('disableRemotePlayback')
-    expect(videoNode).toHaveAttribute('disablePictureInPicture')
-    expect((videoNode as HTMLVideoElement).muted).toBeTruthy()
-  })
-
-  it('should merge default props with custom props', () => {
-    render(<AnimationVideo data-testid="subject" preload="auto" loop={false} />)
-    const videoNode = screen.getByTestId('subject')
-    expect(videoNode).toHaveAttribute('autoplay')
-    expect(videoNode).not.toHaveAttribute('loop') // Default overridden by custom.
-    expect(videoNode).not.toHaveAttribute('controls')
-    expect(videoNode).toHaveAttribute('disableRemotePlayback')
-    expect(videoNode).toHaveAttribute('disablePictureInPicture')
-    expect((videoNode as HTMLVideoElement).muted).toBeTruthy()
-    expect(videoNode).toHaveAttribute('preload', 'auto') // Custom-only.
-  })
-
-  it('should render children', () => {
-    render(
-      <AnimationVideo>
-        <source data-testid="source1"></source>
-        <source data-testid="source2"></source>
-      </AnimationVideo>
-    )
-    screen.getByTestId('source1')
-    screen.getByTestId('source2')
-  })
-})

package/src/atoms/AnimationVideo/index.tsx

@@ -1,44 +0,0 @@
-import type { ComponentProps } from 'react'
-
-export type AnimationVideoProps = ComponentProps<'video'>
-
-/**
- * A `<video>` tag with default props for showing a looping animation.
- *
- * @example
- * ```jsx
- * <AnimationVideo>
- *   <source src="foo.webm" />
- * </AnimationVideo>
- * ```
- */
-export function AnimationVideo(props: AnimationVideoProps): JSX.Element {
-  const {
-    autoPlay = true,
-    loop = true,
-    // Our animations don't have audio, but we apparently need to pass `muted` anyway.
-    // It prevents the browser from trying to play audio on connected Bluetooth
-    // headphones, which would interrupt audio coming from other devices.
-    //
-    // Because of some React nonsense, the rendered DOM node will not have a `muted`
-    // attribute, but its `muted` property will be true, which is good enough.
-    // https://github.com/facebook/react/issues/10389
-    muted = true,
-    controls = false,
-    disableRemotePlayback = true,
-    disablePictureInPicture = true,
-    ...restProps
-  } = props
-  return (
-    <video
-      autoPlay={autoPlay}
-      loop={loop}
-      muted={muted}
-      controls={controls}
-      disableRemotePlayback={disableRemotePlayback}
-      disablePictureInPicture={disablePictureInPicture}
-      {...restProps}
-      // Child <source>s rendered via {...restProps} spreading above.
-    />
-  )
-}

package/src/atoms/Checkbox/Checkbox.stories.tsx

@@ -1,24 +0,0 @@
-import { Checkbox } from './index'
-
-import type { Meta, StoryObj } from '@storybook/react'
-
-const meta: Meta<typeof Checkbox> = {
-  title: 'Helix/Atoms/Checkbox',
-  component: Checkbox,
-}
-
-type Story = StoryObj<typeof Checkbox>
-
-export const Basic: Story = {
-  args: {
-    isChecked: true,
-    labelText: 'Button Text',
-    onClick: () => {
-      console.log('clicked')
-    },
-    tabIndex: 1,
-    disabled: false,
-  },
-}
-
-export default meta

package/src/atoms/Checkbox/__tests__/Checkbox.test.tsx

@@ -1,58 +0,0 @@
-import { fireEvent, screen } from '@testing-library/react'
-import { afterEach, beforeEach, describe, expect, it, vi } from 'vitest'
-
-import '@testing-library/jest-dom/vitest'
-
-import { Checkbox } from '..'
-import { renderWithProviders } from '../../../testing/utils'
-
-import type { ComponentProps } from 'react'
-
-const render = (props: ComponentProps<typeof Checkbox>) => {
-  return renderWithProviders(<Checkbox {...props} />)[0]
-}
-
-describe('Checkbox', () => {
-  let props: ComponentProps<typeof Checkbox>
-
-  beforeEach(() => {
-    props = {
-      onClick: vi.fn(),
-      isChecked: false,
-      labelText: 'fake checkbox label',
-      tabIndex: 1,
-      disabled: false,
-    }
-  })
-
-  afterEach(() => {
-    vi.resetAllMocks()
-  })
-
-  it('renders label with disabled true', () => {
-    props.disabled = true
-    render(props)
-    const checkBoxInput = screen.getByRole('checkbox', {
-      name: 'fake checkbox label',
-    })
-    expect(checkBoxInput).toBeDisabled()
-  })
-
-  it('renders label with correct style - tabIndex 1', () => {
-    props.tabIndex = 1
-    render(props)
-    const checkBoxInput = screen.getByRole('checkbox', {
-      name: 'fake checkbox label',
-    })
-    expect(checkBoxInput).toHaveAttribute('tabindex', '1')
-  })
-
-  it('calls mock function when clicking checkbox', () => {
-    render(props)
-    const checkBoxInput = screen.getByRole('checkbox', {
-      name: 'fake checkbox label',
-    })
-    fireEvent.click(checkBoxInput)
-    expect(props.onClick).toHaveBeenCalled()
-  })
-})

package/src/atoms/Checkbox/index.tsx

@@ -1,134 +0,0 @@
-import { css } from 'styled-components'
-
-import { BORDERS, COLORS } from '../../helix-design-system'
-import { Icon } from '../../icons'
-import { Flex } from '../../primitives'
-import {
-  ALIGN_CENTER,
-  CURSOR_AUTO,
-  CURSOR_DEFAULT,
-  CURSOR_POINTER,
-  DIRECTION_ROW,
-  FLEX_MAX_CONTENT,
-  JUSTIFY_SPACE_BETWEEN,
-} from '../../styles'
-import { RESPONSIVENESS, SPACING } from '../../ui-style-constants'
-import { StyledText } from '../StyledText'
-
-import type { MouseEventHandler } from 'react'
-
-export interface CheckboxProps {
-  /** checkbox is checked if value is true */
-  isChecked: boolean
-  /** label text that describes the option */
-  labelText: string
-  /** callback click/tap handler */
-  onClick: MouseEventHandler
-  /** html tabindex property */
-  tabIndex?: number
-  /** if disabled is true, mouse events will not trigger onClick callback */
-  disabled?: boolean
-  /** optional borderRadius type */
-  type?: 'round' | 'neutral'
-  /** optional width for helix */
-  width?: string
-}
-export function Checkbox(props: CheckboxProps): JSX.Element {
-  const {
-    isChecked,
-    labelText,
-    onClick,
-    tabIndex = 0,
-    disabled = false,
-    width = FLEX_MAX_CONTENT,
-    type = 'round',
-  } = props
-
-  const CHECKBOX_STYLE = css`
-    width: ${width};
-    grid-gap: ${SPACING.spacing12};
-    border: none;
-    align-items: ${ALIGN_CENTER};
-    flex-direction: ${DIRECTION_ROW};
-    color: ${isChecked ? COLORS.white : COLORS.black90};
-    background-color: ${isChecked ? COLORS.blue50 : COLORS.blue30};
-    border-radius: ${type === 'round'
-      ? BORDERS.borderRadiusFull
-      : BORDERS.borderRadius8};
-    padding: ${SPACING.spacing12} ${SPACING.spacing16};
-    justify-content: ${JUSTIFY_SPACE_BETWEEN};
-    cursor: ${CURSOR_POINTER};
-
-    &:active {
-      background-color: ${isChecked ? COLORS.blue55 : COLORS.blue40};
-    }
-    &:focus-visible {
-      background-color: ${isChecked ? COLORS.blue50 : COLORS.blue35};
-      outline: 3px ${BORDERS.styleSolid} ${COLORS.blue50};
-      outline-offset: 2px;
-    }
-    &:disabled {
-      background-color: ${COLORS.grey30};
-      color: ${COLORS.grey40};
-      cursor: ${CURSOR_DEFAULT};
-    }
-    &:disabled:hover {
-      background-color: ${COLORS.grey30}; /* Prevent hover from overriding */
-    }
-    &:hover {
-      background-color: ${isChecked ? COLORS.blue55 : COLORS.blue35};
-    }
-
-    @media ${RESPONSIVENESS.touchscreenMediaQuerySpecs} {
-      padding: ${SPACING.spacing20};
-      border-radius: ${BORDERS.borderRadius16};
-      width: 100%;
-      cursor: ${CURSOR_AUTO};
-    }
-  `
-
-  return (
-    <Flex
-      as="button"
-      role="checkbox"
-      onClick={onClick}
-      tabIndex={tabIndex}
-      disabled={disabled}
-      css={CHECKBOX_STYLE}
-    >
-      <StyledText desktopStyle="bodyDefaultRegular" oddStyle="bodyTextSemiBold">
-        {labelText}
-      </StyledText>
-      <Check isChecked={isChecked} disabled={disabled} />
-    </Flex>
-  )
-}
-
-interface CheckProps {
-  isChecked: boolean
-  color?: string
-  disabled?: boolean
-}
-export function Check(props: CheckProps): JSX.Element {
-  const { isChecked, color = COLORS.white, disabled = false } = props
-  return isChecked ? (
-    <Flex css={CHECK_STYLE}>
-      <Icon name="ot-checkbox" color={color} />
-    </Flex>
-  ) : (
-    <Flex
-      css={CHECK_STYLE}
-      border={`2px solid ${disabled ? COLORS.grey40 : COLORS.black90}`}
-      borderRadius={BORDERS.borderRadius4}
-    />
-  )
-}
-
-const CHECK_STYLE = css`
-  width: 1rem;
-  height: 1rem;
-  @media ${RESPONSIVENESS.touchscreenMediaQuerySpecs} {
-    width: 1.75rem;
-    height: 1.75rem;
-  }
-`

package/src/atoms/CheckboxField/CheckboxField.stories.tsx

@@ -1,31 +0,0 @@
-import * as React from 'react'
-
-import { CheckboxField as CheckboxFieldComponent } from './index'
-
-import type { Meta, Story } from '@storybook/react'
-
-export default {
-  title: 'Helix/Atoms/Checkbox Field',
-  component: CheckboxFieldComponent,
-} as Meta
-
-const Template: Story<
-  React.ComponentProps<typeof CheckboxFieldComponent>
-> = args => {
-  const [isChecked, setIsChecked] = React.useState<boolean>(false)
-  return (
-    <CheckboxFieldComponent
-      {...args}
-      onChange={e => {
-        setIsChecked(!isChecked)
-        args.onChange(e)
-      }}
-      value={isChecked}
-    />
-  )
-}
-export const CheckboxField = Template.bind({})
-CheckboxField.args = {
-  label: 'Remember this setting?',
-  isIndeterminate: false,
-}