@opentelemetry/configuration 0.212.0 → 0.213.0

package/build/src/models/meterProviderModel.js.map

@@ -1 +1 @@
-{"version":3,"file":"meterProviderModel.js","sourceRoot":"","sources":["../../../src/models/meterProviderModel.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;GAcG;AACH,YAAY,CAAC;;;AAUb,SAAgB,2CAA2C;IACzD,OAAO;QACL,OAAO,EAAE,EAAE;QACX,KAAK,EAAE,EAAE;QACT,eAAe,EAAE,cAAc,CAAC,UAAU;KAC3C,CAAC;AACJ,CAAC;AAND,kGAMC;AAuBD,IAAY,cAIX;AAJD,WAAY,cAAc;IACxB,0CAAwB,CAAA;IACxB,wCAAsB,CAAA;IACtB,4CAA0B,CAAA;AAC5B,CAAC,EAJW,cAAc,GAAd,sBAAc,KAAd,sBAAc,QAIzB;AA+KD,IAAY,yCAKX;AALD,WAAY,yCAAyC;IACnD,iHAAoE,CAAA;IACpE,uHAA0E,CAAA;IAC1E,0GAA6D,CAAA;IAC7D,6EAAgC,CAAA;AAClC,CAAC,EALW,yCAAyC,GAAzC,iDAAyC,KAAzC,iDAAyC,QAKpD;AAwJD,IAAY,6BAIX;AAJD,WAAY,6BAA6B;IACvC,0DAAyB,CAAA;IACzB,gDAAe,CAAA;IACf,yDAAwB,CAAA;AAC1B,CAAC,EAJW,6BAA6B,GAA7B,qCAA6B,KAA7B,qCAA6B,QAIxC;AAED,IAAY,mCAGX;AAHD,WAAY,mCAAmC;IAC7C,6GAAsE,CAAA;IACtE,4FAAqD,CAAA;AACvD,CAAC,EAHW,mCAAmC,GAAnC,2CAAmC,KAAnC,2CAAmC,QAG9C;AAoED,IAAY,cAQX;AARD,WAAY,cAAc;IACxB,qCAAmB,CAAA;IACnB,iCAAe,CAAA;IACf,yCAAuB,CAAA;IACvB,0DAAwC,CAAA;IACxC,sDAAoC,CAAA;IACpC,wEAAsD,CAAA;IACtD,mDAAiC,CAAA;AACnC,CAAC,EARW,cAAc,GAAd,sBAAc,KAAd,sBAAc,QAQzB","sourcesContent":["/*\n * Copyright The OpenTelemetry Authors\n *\n * Licensed under the Apache License, Version 2.0 (the \"License\");\n * you may not use this file except in compliance with the License.\n * You may obtain a copy of the License at\n *\n *      https://www.apache.org/licenses/LICENSE-2.0\n *\n * Unless required by applicable law or agreed to in writing, software\n * distributed under the License is distributed on an \"AS IS\" BASIS,\n * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n * See the License for the specific language governing permissions and\n * limitations under the License.\n */\n'use strict';\n\nimport {\n  GrpcTls,\n  HttpTls,\n  IncludeExclude,\n  NameStringValuePair,\n  OtlpHttpEncoding,\n} from './commonModel';\n\nexport function initializeDefaultMeterProviderConfiguration(): Required<MeterProvider> {\n  return {\n    readers: [],\n    views: [],\n    exemplar_filter: ExemplarFilter.TraceBased,\n  };\n}\n\nexport interface MeterProvider {\n  /**\n   * Configure metric readers.\n   */\n  readers: MetricReader[];\n\n  /**\n   * Configure views.\n   * Each view has a selector which determines the instrument(s) it applies to,\n   * and a configuration for the resulting stream(s).\n   */\n  views?: View[];\n\n  /**\n   * Configure the exemplar filter.\n   * Values include: trace_based, always_on, always_off.\n   * If omitted or null, trace_based is used.\n   */\n  exemplar_filter?: ExemplarFilter;\n}\n\nexport enum ExemplarFilter {\n  AlwaysOff = 'always_off',\n  AlwaysOn = 'always_on',\n  TraceBased = 'trace_based',\n}\n\nexport interface PeriodicMetricReader {\n  /**\n   * Configure delay interval (in milliseconds) between start of two consecutive exports.\n   * Value must be non-negative.\n   * If omitted or null, 60000 is used.\n   */\n  interval?: number;\n\n  /**\n   * Configure maximum allowed time (in milliseconds) to export data.\n   * Value must be non-negative. A value of 0 indicates no limit (infinity).\n   * If omitted or null, 30000 is used.\n   */\n  timeout?: number;\n\n  /**\n   * Configure exporter.\n   */\n  exporter: PushMetricExporter;\n\n  /**\n   * Configure metric producers.\n   */\n  producers?: MetricProducer[];\n\n  /**\n   * Configure cardinality limits.\n   */\n  cardinality_limits?: CardinalityLimits;\n}\n\nexport interface PullMetricReader {\n  /**\n   * Configure exporter.\n   */\n  exporter: PullMetricExporter;\n\n  /**\n   * Configure metric producers.\n   */\n  producers?: MetricProducer[];\n\n  /**\n   * Configure cardinality limits.\n   */\n  cardinality_limits?: CardinalityLimits;\n}\n\nexport interface CardinalityLimits {\n  /**\n   * Configure default cardinality limit for all instrument types.\n   * Instrument-specific cardinality limits take priority.\n   * If omitted or null, 2000 is used.\n   */\n  default?: number;\n\n  /**\n   * Configure default cardinality limit for counter instruments.\n   * If omitted or null, the value from .default is used.\n   */\n  counter?: number;\n\n  /**\n   * Configure default cardinality limit for gauge instruments.\n   * If omitted or null, the value from .default is used.\n   */\n  gauge?: number;\n\n  /**\n   * Configure default cardinality limit for histogram instruments.\n   * If omitted or null, the value from .default is used.\n   */\n  histogram?: number;\n\n  /**\n   * Configure default cardinality limit for observable_counter instruments.\n   * If omitted or null, the value from .default is used.\n   */\n  observable_counter?: number;\n\n  /**\n   * Configure default cardinality limit for observable_gauge instruments.\n   * If omitted or null, the value from .default is used.\n   */\n  observable_gauge?: number;\n\n  /**\n   * Configure default cardinality limit for observable_up_down_counter instruments.\n   * If omitted or null, the value from .default is used.\n   */\n  observable_up_down_counter?: number;\n\n  /**\n   * Configure default cardinality limit for up_down_counter instruments.\n   * If omitted or null, the value from .default is used.\n   */\n  up_down_counter?: number;\n}\n\nexport interface PushMetricExporter {\n  /**\n   * Configure exporter to be OTLP with HTTP transport.\n   */\n  otlp_http?: OtlpHttpMetricExporter;\n\n  /**\n   * Configure exporter to be OTLP with gRPC transport.\n   */\n  otlp_grpc?: OtlpGrpcMetricExporter;\n\n  /**\n   * Configure exporter to be OTLP with file transport.\n   * This type is in development and subject to breaking changes in minor versions.\n   */\n  'otlp_file/development'?: ExperimentalOtlpFileMetricExporter;\n\n  /**\n   * Configure exporter to be console.\n   */\n  console?: ConsoleMetricExporter;\n}\n\nexport interface PullMetricExporter {\n  /**\n   * Configure exporter to be prometheus.\n   * This type is in development and subject to breaking changes in minor versions.\n   */\n  'prometheus/development': ExperimentalPrometheusMetricExporter;\n}\n\nexport interface MetricProducer {\n  /**\n   * Configure metric producer to be opencensus.\n   */\n  opencensus?: object;\n}\n\nexport interface ExperimentalPrometheusMetricExporter {\n  /**\n   * Configure host.\n   * If omitted or null, localhost is used.\n   */\n  host?: string;\n\n  /**\n   * Configure port.\n   * If omitted or null, 9464 is used.\n   */\n  port?: number;\n\n  /**\n   * Configure Prometheus Exporter to produce metrics without a scope info metric.\n   * If omitted or null, false is used.\n   */\n  without_scope_info?: boolean;\n\n  /**\n   * Configure Prometheus Exporter to produce metrics without a target info metric for the resource.\n   * If omitted or null, false is used.\n   */\n  without_target_info?: boolean;\n\n  /**\n   * Configure Prometheus Exporter to add resource attributes as metrics attributes.\n   */\n  with_resource_constant_labels?: IncludeExclude;\n\n  /**\n   * Configure how metric names are translated to Prometheus metric names.\n   */\n  translation_strategy?: ExperimentalPrometheusTranslationStrategy;\n}\n\nexport enum ExperimentalPrometheusTranslationStrategy {\n  UnderscoreEscapingWithSuffixes = 'underscore_escaping_with_suffixes',\n  UnderscoreEscapingWithoutSuffixes = 'underscore_escaping_without_suffixes',\n  NoUtf8EscapingWithSuffixes = 'no_utf8_escaping_with_suffixes',\n  NoTranslation = 'no_translation',\n}\n\nexport interface MetricReader {\n  /**\n   * Configure a periodic metric reader.\n   */\n  periodic?: PeriodicMetricReader;\n\n  /**\n   * Configure a pull based metric reader.\n   */\n  pull?: PullMetricReader;\n}\n\nexport interface OtlpHttpMetricExporter {\n  /**\n   * Configure endpoint, including the metric specific path.\n   * If omitted or null, http://localhost:4318/v1/metrics is used.\n   */\n  endpoint?: string;\n\n  /**\n   * Configure TLS settings for the exporter.\n   */\n  tls?: HttpTls;\n\n  /**\n   * Configure headers. Entries have higher priority than entries from .headers_list.\n   * If an entry's .value is null, the entry is ignored.\n   */\n  headers?: NameStringValuePair[];\n\n  /**\n   * Configure headers. Entries have lower priority than entries from .headers.\n   * The value is a list of comma separated key-value pairs matching the format of OTEL_EXPORTER_OTLP_HEADERS.\n   * If omitted or null, no headers are added.\n   */\n  headers_list?: string;\n\n  /**\n   * Configure compression.\n   * Values include: gzip, none. Implementations may support other compression algorithms.\n   * If omitted or null, none is used.\n   */\n  compression?: string;\n\n  /**\n   * Configure max time (in milliseconds) to wait for each export.\n   * Value must be non-negative. A value of 0 indicates no limit (infinity).\n   * If omitted or null, 10000 is used.\n   */\n  timeout?: number;\n\n  /**\n   * Configure the encoding used for messages.\n   * Values include: protobuf, json. Implementations may not support json.\n   * If omitted or null, protobuf is used.\n   */\n  encoding?: OtlpHttpEncoding;\n\n  /**\n   * Configure temporality preference.\n   * Values include: cumulative, delta, low_memory.\n   * If omitted or null, cumulative is used.\n   */\n  temporality_preference?: ExporterTemporalityPreference;\n\n  /**\n   * Configure default histogram aggregation.\n   * Values include: explicit_bucket_histogram, base2_exponential_bucket_histogram.\n   * If omitted or null, explicit_bucket_histogram is used.\n   */\n  default_histogram_aggregation?: ExporterDefaultHistogramAggregation;\n}\n\nexport interface OtlpGrpcMetricExporter {\n  /**\n   * Configure endpoint.\n   * If omitted or null, http://localhost:4317 is used.\n   */\n  endpoint?: string;\n\n  /**\n   * Configure TLS settings for the exporter.\n   */\n  tls?: GrpcTls;\n\n  /**\n   * Configure headers. Entries have higher priority than entries from .headers_list.\n   * If an entry's .value is null, the entry is ignored.\n   */\n  headers?: NameStringValuePair[];\n\n  /**\n   * Configure headers. Entries have lower priority than entries from .headers.\n   * The value is a list of comma separated key-value pairs matching the format of OTEL_EXPORTER_OTLP_HEADERS.\n   * If omitted or null, no headers are added.\n   */\n  headers_list?: string;\n\n  /**\n   * Configure compression.\n   * Values include: gzip, none. Implementations may support other compression algorithms.\n   * If omitted or null, none is used.\n   */\n  compression?: string;\n\n  /**\n   * Configure max time (in milliseconds) to wait for each export.\n   * Value must be non-negative. A value of 0 indicates no limit (infinity).\n   * If omitted or null, 10000 is used.\n   */\n  timeout?: number;\n\n  /**\n   * Configure temporality preference.\n   * Values include: cumulative, delta, low_memory.\n   * If omitted or null, cumulative is used.\n   */\n  temporality_preference?: ExporterTemporalityPreference;\n\n  /**\n   * Configure default histogram aggregation.\n   * Values include: explicit_bucket_histogram, base2_exponential_bucket_histogram.\n   * If omitted or null, explicit_bucket_histogram is used.\n   */\n  default_histogram_aggregation?: ExporterDefaultHistogramAggregation;\n}\n\nexport interface ExperimentalOtlpFileMetricExporter {\n  /**\n   * Configure output stream.\n   * Values include stdout, or scheme+destination. For example: file:///path/to/file.jsonl.\n   * If omitted or null, stdout is used.\n   */\n  output_stream?: string;\n\n  /**\n   * Configure temporality preference.\n   * Values include: cumulative, delta, low_memory.\n   * If omitted or null, cumulative is used.\n   */\n  temporality_preference?: ExporterTemporalityPreference;\n\n  /**\n   * Configure default histogram aggregation.\n   * Values include: explicit_bucket_histogram, base2_exponential_bucket_histogram.\n   * If omitted or null, explicit_bucket_histogram is used.\n   */\n  default_histogram_aggregation?: ExporterDefaultHistogramAggregation;\n}\n\nexport enum ExporterTemporalityPreference {\n  Cumulative = 'cumulative',\n  Delta = 'delta',\n  LowMemory = 'low_memory',\n}\n\nexport enum ExporterDefaultHistogramAggregation {\n  Base2ExponentialBucketHistogram = 'base2_exponential_bucket_histogram',\n  ExplicitBucketHistogram = 'explicit_bucket_histogram',\n}\n\nexport interface ConsoleMetricExporter {\n  /**\n   * Configure temporality preference.\n   * If omitted or null, cumulative is used.\n   */\n  temporality_preference?: ExporterTemporalityPreference;\n\n  /**\n   * Configure default histogram aggregation.\n   * If omitted or null, explicit_bucket_histogram is used.\n   */\n  default_histogram_aggregation?: ExporterDefaultHistogramAggregation;\n}\n\nexport interface View {\n  /**\n   * Configure view selector.\n   */\n  selector?: ViewSelector;\n\n  /**\n   * Configure view stream.\n   */\n  stream?: ViewStream;\n}\n\nexport interface ViewSelector {\n  /**\n   * Configure instrument name selection criteria.\n   * If omitted or null, all instrument names match.\n   */\n  instrument_name?: string;\n\n  /**\n   * Configure instrument type selection criteria.\n   * Values include: counter, gauge, histogram, observable_counter, observable_gauge,\n   * observable_up_down_counter, up_down_counter.\n   * If omitted or null, all instrument types match.\n   */\n  instrument_type?: InstrumentType;\n\n  /**\n   * Configure the instrument unit selection criteria.\n   * If omitted or null, all instrument units match.\n   */\n  unit?: string;\n\n  /**\n   * Configure meter name selection criteria.\n   * If omitted or null, all meter names match.\n   */\n  meter_name?: string;\n\n  /**\n   * Configure meter version selection criteria.\n   * If omitted or null, all meter versions match.\n   */\n  meter_version?: string;\n\n  /**\n   * Configure meter schema url selection criteria.\n   * If omitted or null, all meter schema URLs match.\n   */\n  meter_schema_url?: string;\n}\n\nexport enum InstrumentType {\n  Counter = 'counter',\n  Gauge = 'gauge',\n  Histogram = 'histogram',\n  ObservableCounter = 'observable_counter',\n  ObservableGauge = 'observable_gauge',\n  ObservableUpDownCounter = 'observable_up_down_counter',\n  UpDownCounter = 'up_down_counter',\n}\n\nexport interface ViewStream {\n  /**\n   * Configure metric name of the resulting stream(s).\n   * If omitted or null, the instrument's original name is used.\n   */\n  name?: string;\n\n  /**\n   * Configure metric description of the resulting stream(s).\n   * If omitted or null, the instrument's origin description is used.\n   */\n  description?: string;\n\n  /**\n   * Configure aggregation of the resulting stream(s).\n   * Values include: default, drop, explicit_bucket_histogram, base2_exponential_bucket_histogram, last_value, sum.\n   * If omitted, default is used.\n   */\n  aggregation?: Aggregation;\n\n  /**\n   * Configure the aggregation cardinality limit.\n   * If omitted or null, the metric reader's default cardinality limit is used.\n   */\n  aggregation_cardinality_limit?: number;\n\n  /**\n   * Configure attribute keys retained in the resulting stream(s).\n   */\n  attribute_keys?: IncludeExclude;\n}\n\nexport interface Aggregation {\n  /**\n   * Configure aggregation to be default.\n   */\n  default?: object;\n\n  /**\n   * Configure aggregation to be drop.\n   */\n  drop?: object;\n\n  /**\n   * Configure aggregation to be explicit_bucket_histogram.\n   */\n  explicit_bucket_histogram?: ExplicitBucketHistogramAggregation;\n\n  /**\n   * Configure aggregation to be base2_exponential_bucket_histogram.\n   */\n  base2_exponential_bucket_histogram?: Base2ExponentialBucketHistogramAggregation;\n\n  /**\n   * Configure aggregation to be last_value.\n   */\n  last_value?: object;\n\n  /**\n   * Configure aggregation to be sum.\n   */\n  sum?: object;\n}\n\nexport interface ExplicitBucketHistogramAggregation {\n  /**\n   * Configure bucket boundaries.\n   * If omitted, [0, 5, 10, 25, 50, 75, 100, 250, 500, 750, 1000, 2500, 5000, 7500, 10000] is used.\n   */\n  boundaries?: number[];\n\n  /**\n   * Configure record min and max.\n   * If omitted or null, true is used.\n   */\n  record_min_max?: boolean;\n}\n\nexport interface Base2ExponentialBucketHistogramAggregation {\n  /**\n   * Configure max_scale.\n   */\n  max_scale?: number;\n\n  /**\n   * Configure max_size.\n   */\n  max_size?: number;\n\n  /**\n   * Configure record min and max.\n   * If omitted or null, true is used.\n   */\n  record_min_max?: boolean;\n}\n"]}
+{"version":3,"file":"meterProviderModel.js","sourceRoot":"","sources":["../../../src/models/meterProviderModel.ts"],"names":[],"mappings":"AAAA;;;GAGG;AACH,YAAY,CAAC;;;AAUb,SAAgB,2CAA2C;IACzD,OAAO;QACL,OAAO,EAAE,EAAE;QACX,KAAK,EAAE,EAAE;QACT,eAAe,EAAE,cAAc,CAAC,UAAU;KAC3C,CAAC;AACJ,CAAC;AAND,kGAMC;AAuBD,IAAY,cAIX;AAJD,WAAY,cAAc;IACxB,0CAAwB,CAAA;IACxB,wCAAsB,CAAA;IACtB,4CAA0B,CAAA;AAC5B,CAAC,EAJW,cAAc,GAAd,sBAAc,KAAd,sBAAc,QAIzB;AA+KD,IAAY,yCAKX;AALD,WAAY,yCAAyC;IACnD,iHAAoE,CAAA;IACpE,uHAA0E,CAAA;IAC1E,0GAA6D,CAAA;IAC7D,6EAAgC,CAAA;AAClC,CAAC,EALW,yCAAyC,GAAzC,iDAAyC,KAAzC,iDAAyC,QAKpD;AAwJD,IAAY,6BAIX;AAJD,WAAY,6BAA6B;IACvC,0DAAyB,CAAA;IACzB,gDAAe,CAAA;IACf,yDAAwB,CAAA;AAC1B,CAAC,EAJW,6BAA6B,GAA7B,qCAA6B,KAA7B,qCAA6B,QAIxC;AAED,IAAY,mCAGX;AAHD,WAAY,mCAAmC;IAC7C,6GAAsE,CAAA;IACtE,4FAAqD,CAAA;AACvD,CAAC,EAHW,mCAAmC,GAAnC,2CAAmC,KAAnC,2CAAmC,QAG9C;AAoED,IAAY,cAQX;AARD,WAAY,cAAc;IACxB,qCAAmB,CAAA;IACnB,iCAAe,CAAA;IACf,yCAAuB,CAAA;IACvB,0DAAwC,CAAA;IACxC,sDAAoC,CAAA;IACpC,wEAAsD,CAAA;IACtD,mDAAiC,CAAA;AACnC,CAAC,EARW,cAAc,GAAd,sBAAc,KAAd,sBAAc,QAQzB","sourcesContent":["/*\n * Copyright The OpenTelemetry Authors\n * SPDX-License-Identifier: Apache-2.0\n */\n'use strict';\n\nimport {\n  GrpcTls,\n  HttpTls,\n  IncludeExclude,\n  NameStringValuePair,\n  OtlpHttpEncoding,\n} from './commonModel';\n\nexport function initializeDefaultMeterProviderConfiguration(): Required<MeterProvider> {\n  return {\n    readers: [],\n    views: [],\n    exemplar_filter: ExemplarFilter.TraceBased,\n  };\n}\n\nexport interface MeterProvider {\n  /**\n   * Configure metric readers.\n   */\n  readers: MetricReader[];\n\n  /**\n   * Configure views.\n   * Each view has a selector which determines the instrument(s) it applies to,\n   * and a configuration for the resulting stream(s).\n   */\n  views?: View[];\n\n  /**\n   * Configure the exemplar filter.\n   * Values include: trace_based, always_on, always_off.\n   * If omitted or null, trace_based is used.\n   */\n  exemplar_filter?: ExemplarFilter;\n}\n\nexport enum ExemplarFilter {\n  AlwaysOff = 'always_off',\n  AlwaysOn = 'always_on',\n  TraceBased = 'trace_based',\n}\n\nexport interface PeriodicMetricReader {\n  /**\n   * Configure delay interval (in milliseconds) between start of two consecutive exports.\n   * Value must be non-negative.\n   * If omitted or null, 60000 is used.\n   */\n  interval?: number;\n\n  /**\n   * Configure maximum allowed time (in milliseconds) to export data.\n   * Value must be non-negative. A value of 0 indicates no limit (infinity).\n   * If omitted or null, 30000 is used.\n   */\n  timeout?: number;\n\n  /**\n   * Configure exporter.\n   */\n  exporter: PushMetricExporter;\n\n  /**\n   * Configure metric producers.\n   */\n  producers?: MetricProducer[];\n\n  /**\n   * Configure cardinality limits.\n   */\n  cardinality_limits?: CardinalityLimits;\n}\n\nexport interface PullMetricReader {\n  /**\n   * Configure exporter.\n   */\n  exporter: PullMetricExporter;\n\n  /**\n   * Configure metric producers.\n   */\n  producers?: MetricProducer[];\n\n  /**\n   * Configure cardinality limits.\n   */\n  cardinality_limits?: CardinalityLimits;\n}\n\nexport interface CardinalityLimits {\n  /**\n   * Configure default cardinality limit for all instrument types.\n   * Instrument-specific cardinality limits take priority.\n   * If omitted or null, 2000 is used.\n   */\n  default?: number;\n\n  /**\n   * Configure default cardinality limit for counter instruments.\n   * If omitted or null, the value from .default is used.\n   */\n  counter?: number;\n\n  /**\n   * Configure default cardinality limit for gauge instruments.\n   * If omitted or null, the value from .default is used.\n   */\n  gauge?: number;\n\n  /**\n   * Configure default cardinality limit for histogram instruments.\n   * If omitted or null, the value from .default is used.\n   */\n  histogram?: number;\n\n  /**\n   * Configure default cardinality limit for observable_counter instruments.\n   * If omitted or null, the value from .default is used.\n   */\n  observable_counter?: number;\n\n  /**\n   * Configure default cardinality limit for observable_gauge instruments.\n   * If omitted or null, the value from .default is used.\n   */\n  observable_gauge?: number;\n\n  /**\n   * Configure default cardinality limit for observable_up_down_counter instruments.\n   * If omitted or null, the value from .default is used.\n   */\n  observable_up_down_counter?: number;\n\n  /**\n   * Configure default cardinality limit for up_down_counter instruments.\n   * If omitted or null, the value from .default is used.\n   */\n  up_down_counter?: number;\n}\n\nexport interface PushMetricExporter {\n  /**\n   * Configure exporter to be OTLP with HTTP transport.\n   */\n  otlp_http?: OtlpHttpMetricExporter;\n\n  /**\n   * Configure exporter to be OTLP with gRPC transport.\n   */\n  otlp_grpc?: OtlpGrpcMetricExporter;\n\n  /**\n   * Configure exporter to be OTLP with file transport.\n   * This type is in development and subject to breaking changes in minor versions.\n   */\n  'otlp_file/development'?: ExperimentalOtlpFileMetricExporter;\n\n  /**\n   * Configure exporter to be console.\n   */\n  console?: ConsoleMetricExporter;\n}\n\nexport interface PullMetricExporter {\n  /**\n   * Configure exporter to be prometheus.\n   * This type is in development and subject to breaking changes in minor versions.\n   */\n  'prometheus/development': ExperimentalPrometheusMetricExporter;\n}\n\nexport interface MetricProducer {\n  /**\n   * Configure metric producer to be opencensus.\n   */\n  opencensus?: object;\n}\n\nexport interface ExperimentalPrometheusMetricExporter {\n  /**\n   * Configure host.\n   * If omitted or null, localhost is used.\n   */\n  host?: string;\n\n  /**\n   * Configure port.\n   * If omitted or null, 9464 is used.\n   */\n  port?: number;\n\n  /**\n   * Configure Prometheus Exporter to produce metrics without a scope info metric.\n   * If omitted or null, false is used.\n   */\n  without_scope_info?: boolean;\n\n  /**\n   * Configure Prometheus Exporter to produce metrics without a target info metric for the resource.\n   * If omitted or null, false is used.\n   */\n  without_target_info?: boolean;\n\n  /**\n   * Configure Prometheus Exporter to add resource attributes as metrics attributes.\n   */\n  with_resource_constant_labels?: IncludeExclude;\n\n  /**\n   * Configure how metric names are translated to Prometheus metric names.\n   */\n  translation_strategy?: ExperimentalPrometheusTranslationStrategy;\n}\n\nexport enum ExperimentalPrometheusTranslationStrategy {\n  UnderscoreEscapingWithSuffixes = 'underscore_escaping_with_suffixes',\n  UnderscoreEscapingWithoutSuffixes = 'underscore_escaping_without_suffixes',\n  NoUtf8EscapingWithSuffixes = 'no_utf8_escaping_with_suffixes',\n  NoTranslation = 'no_translation',\n}\n\nexport interface MetricReader {\n  /**\n   * Configure a periodic metric reader.\n   */\n  periodic?: PeriodicMetricReader;\n\n  /**\n   * Configure a pull based metric reader.\n   */\n  pull?: PullMetricReader;\n}\n\nexport interface OtlpHttpMetricExporter {\n  /**\n   * Configure endpoint, including the metric specific path.\n   * If omitted or null, http://localhost:4318/v1/metrics is used.\n   */\n  endpoint?: string;\n\n  /**\n   * Configure TLS settings for the exporter.\n   */\n  tls?: HttpTls;\n\n  /**\n   * Configure headers. Entries have higher priority than entries from .headers_list.\n   * If an entry's .value is null, the entry is ignored.\n   */\n  headers?: NameStringValuePair[];\n\n  /**\n   * Configure headers. Entries have lower priority than entries from .headers.\n   * The value is a list of comma separated key-value pairs matching the format of OTEL_EXPORTER_OTLP_HEADERS.\n   * If omitted or null, no headers are added.\n   */\n  headers_list?: string;\n\n  /**\n   * Configure compression.\n   * Values include: gzip, none. Implementations may support other compression algorithms.\n   * If omitted or null, none is used.\n   */\n  compression?: string;\n\n  /**\n   * Configure max time (in milliseconds) to wait for each export.\n   * Value must be non-negative. A value of 0 indicates no limit (infinity).\n   * If omitted or null, 10000 is used.\n   */\n  timeout?: number;\n\n  /**\n   * Configure the encoding used for messages.\n   * Values include: protobuf, json. Implementations may not support json.\n   * If omitted or null, protobuf is used.\n   */\n  encoding?: OtlpHttpEncoding;\n\n  /**\n   * Configure temporality preference.\n   * Values include: cumulative, delta, low_memory.\n   * If omitted or null, cumulative is used.\n   */\n  temporality_preference?: ExporterTemporalityPreference;\n\n  /**\n   * Configure default histogram aggregation.\n   * Values include: explicit_bucket_histogram, base2_exponential_bucket_histogram.\n   * If omitted or null, explicit_bucket_histogram is used.\n   */\n  default_histogram_aggregation?: ExporterDefaultHistogramAggregation;\n}\n\nexport interface OtlpGrpcMetricExporter {\n  /**\n   * Configure endpoint.\n   * If omitted or null, http://localhost:4317 is used.\n   */\n  endpoint?: string;\n\n  /**\n   * Configure TLS settings for the exporter.\n   */\n  tls?: GrpcTls;\n\n  /**\n   * Configure headers. Entries have higher priority than entries from .headers_list.\n   * If an entry's .value is null, the entry is ignored.\n   */\n  headers?: NameStringValuePair[];\n\n  /**\n   * Configure headers. Entries have lower priority than entries from .headers.\n   * The value is a list of comma separated key-value pairs matching the format of OTEL_EXPORTER_OTLP_HEADERS.\n   * If omitted or null, no headers are added.\n   */\n  headers_list?: string;\n\n  /**\n   * Configure compression.\n   * Values include: gzip, none. Implementations may support other compression algorithms.\n   * If omitted or null, none is used.\n   */\n  compression?: string;\n\n  /**\n   * Configure max time (in milliseconds) to wait for each export.\n   * Value must be non-negative. A value of 0 indicates no limit (infinity).\n   * If omitted or null, 10000 is used.\n   */\n  timeout?: number;\n\n  /**\n   * Configure temporality preference.\n   * Values include: cumulative, delta, low_memory.\n   * If omitted or null, cumulative is used.\n   */\n  temporality_preference?: ExporterTemporalityPreference;\n\n  /**\n   * Configure default histogram aggregation.\n   * Values include: explicit_bucket_histogram, base2_exponential_bucket_histogram.\n   * If omitted or null, explicit_bucket_histogram is used.\n   */\n  default_histogram_aggregation?: ExporterDefaultHistogramAggregation;\n}\n\nexport interface ExperimentalOtlpFileMetricExporter {\n  /**\n   * Configure output stream.\n   * Values include stdout, or scheme+destination. For example: file:///path/to/file.jsonl.\n   * If omitted or null, stdout is used.\n   */\n  output_stream?: string;\n\n  /**\n   * Configure temporality preference.\n   * Values include: cumulative, delta, low_memory.\n   * If omitted or null, cumulative is used.\n   */\n  temporality_preference?: ExporterTemporalityPreference;\n\n  /**\n   * Configure default histogram aggregation.\n   * Values include: explicit_bucket_histogram, base2_exponential_bucket_histogram.\n   * If omitted or null, explicit_bucket_histogram is used.\n   */\n  default_histogram_aggregation?: ExporterDefaultHistogramAggregation;\n}\n\nexport enum ExporterTemporalityPreference {\n  Cumulative = 'cumulative',\n  Delta = 'delta',\n  LowMemory = 'low_memory',\n}\n\nexport enum ExporterDefaultHistogramAggregation {\n  Base2ExponentialBucketHistogram = 'base2_exponential_bucket_histogram',\n  ExplicitBucketHistogram = 'explicit_bucket_histogram',\n}\n\nexport interface ConsoleMetricExporter {\n  /**\n   * Configure temporality preference.\n   * If omitted or null, cumulative is used.\n   */\n  temporality_preference?: ExporterTemporalityPreference;\n\n  /**\n   * Configure default histogram aggregation.\n   * If omitted or null, explicit_bucket_histogram is used.\n   */\n  default_histogram_aggregation?: ExporterDefaultHistogramAggregation;\n}\n\nexport interface View {\n  /**\n   * Configure view selector.\n   */\n  selector?: ViewSelector;\n\n  /**\n   * Configure view stream.\n   */\n  stream?: ViewStream;\n}\n\nexport interface ViewSelector {\n  /**\n   * Configure instrument name selection criteria.\n   * If omitted or null, all instrument names match.\n   */\n  instrument_name?: string;\n\n  /**\n   * Configure instrument type selection criteria.\n   * Values include: counter, gauge, histogram, observable_counter, observable_gauge,\n   * observable_up_down_counter, up_down_counter.\n   * If omitted or null, all instrument types match.\n   */\n  instrument_type?: InstrumentType;\n\n  /**\n   * Configure the instrument unit selection criteria.\n   * If omitted or null, all instrument units match.\n   */\n  unit?: string;\n\n  /**\n   * Configure meter name selection criteria.\n   * If omitted or null, all meter names match.\n   */\n  meter_name?: string;\n\n  /**\n   * Configure meter version selection criteria.\n   * If omitted or null, all meter versions match.\n   */\n  meter_version?: string;\n\n  /**\n   * Configure meter schema url selection criteria.\n   * If omitted or null, all meter schema URLs match.\n   */\n  meter_schema_url?: string;\n}\n\nexport enum InstrumentType {\n  Counter = 'counter',\n  Gauge = 'gauge',\n  Histogram = 'histogram',\n  ObservableCounter = 'observable_counter',\n  ObservableGauge = 'observable_gauge',\n  ObservableUpDownCounter = 'observable_up_down_counter',\n  UpDownCounter = 'up_down_counter',\n}\n\nexport interface ViewStream {\n  /**\n   * Configure metric name of the resulting stream(s).\n   * If omitted or null, the instrument's original name is used.\n   */\n  name?: string;\n\n  /**\n   * Configure metric description of the resulting stream(s).\n   * If omitted or null, the instrument's origin description is used.\n   */\n  description?: string;\n\n  /**\n   * Configure aggregation of the resulting stream(s).\n   * Values include: default, drop, explicit_bucket_histogram, base2_exponential_bucket_histogram, last_value, sum.\n   * If omitted, default is used.\n   */\n  aggregation?: Aggregation;\n\n  /**\n   * Configure the aggregation cardinality limit.\n   * If omitted or null, the metric reader's default cardinality limit is used.\n   */\n  aggregation_cardinality_limit?: number;\n\n  /**\n   * Configure attribute keys retained in the resulting stream(s).\n   */\n  attribute_keys?: IncludeExclude;\n}\n\nexport interface Aggregation {\n  /**\n   * Configure aggregation to be default.\n   */\n  default?: object;\n\n  /**\n   * Configure aggregation to be drop.\n   */\n  drop?: object;\n\n  /**\n   * Configure aggregation to be explicit_bucket_histogram.\n   */\n  explicit_bucket_histogram?: ExplicitBucketHistogramAggregation;\n\n  /**\n   * Configure aggregation to be base2_exponential_bucket_histogram.\n   */\n  base2_exponential_bucket_histogram?: Base2ExponentialBucketHistogramAggregation;\n\n  /**\n   * Configure aggregation to be last_value.\n   */\n  last_value?: object;\n\n  /**\n   * Configure aggregation to be sum.\n   */\n  sum?: object;\n}\n\nexport interface ExplicitBucketHistogramAggregation {\n  /**\n   * Configure bucket boundaries.\n   * If omitted, [0, 5, 10, 25, 50, 75, 100, 250, 500, 750, 1000, 2500, 5000, 7500, 10000] is used.\n   */\n  boundaries?: number[];\n\n  /**\n   * Configure record min and max.\n   * If omitted or null, true is used.\n   */\n  record_min_max?: boolean;\n}\n\nexport interface Base2ExponentialBucketHistogramAggregation {\n  /**\n   * Configure max_scale.\n   */\n  max_scale?: number;\n\n  /**\n   * Configure max_size.\n   */\n  max_size?: number;\n\n  /**\n   * Configure record min and max.\n   * If omitted or null, true is used.\n   */\n  record_min_max?: boolean;\n}\n"]}

package/build/src/models/resourceModel.js

@@ -1,17 +1,6 @@
 /*
  * Copyright The OpenTelemetry Authors
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      https://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
+ * SPDX-License-Identifier: Apache-2.0
  */
 'use strict';
 Object.defineProperty(exports, "__esModule", { value: true });

package/build/src/models/resourceModel.js.map

@@ -1 +1 @@
-{"version":3,"file":"resourceModel.js","sourceRoot":"","sources":["../../../src/models/resourceModel.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;GAcG;AACH,YAAY,CAAC","sourcesContent":["/*\n * Copyright The OpenTelemetry Authors\n *\n * Licensed under the Apache License, Version 2.0 (the \"License\");\n * you may not use this file except in compliance with the License.\n * You may obtain a copy of the License at\n *\n *      https://www.apache.org/licenses/LICENSE-2.0\n *\n * Unless required by applicable law or agreed to in writing, software\n * distributed under the License is distributed on an \"AS IS\" BASIS,\n * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n * See the License for the specific language governing permissions and\n * limitations under the License.\n */\n'use strict';\n\nimport { IncludeExclude } from './commonModel';\n\nexport interface Resource {\n  /**\n   * Configure resource attributes. Entries have higher priority than entries from .resource.attributes_list.\n   * Entries must contain .name and .value, and may optionally include .type. If an entry's .type omitted or null, string is used.\n   * The .value's type must match the .type. Values for .type include: string, bool, int, double, string_array, bool_array, int_array, double_array.\n   */\n  attributes?: AttributeNameValue[];\n\n  /**\n   * Configure resource attributes. Entries have lower priority than entries from .resource.attributes.\n   * The value is a list of comma separated key-value pairs matching the format of OTEL_RESOURCE_ATTRIBUTES.\n   * If omitted or null, no resource attributes are added.\n   */\n  attributes_list?: string;\n\n  /**\n   * Configure resource schema URL.\n   * If omitted or null, no schema URL is used.\n   */\n  schema_url?: string;\n\n  /**\n   * Configure resource detection.\n   * This type is in development and subject to breaking changes in minor versions.\n   * If omitted or null, resource detection is disabled.\n   */\n  'detection/development'?: ExperimentalResourceDetection;\n}\n\nexport interface AttributeNameValue {\n  name: string;\n  value:\n    | string\n    | boolean\n    | number\n    | string[]\n    | boolean[]\n    | number[]\n    | undefined;\n  type?:\n    | 'string'\n    | 'bool'\n    | 'int'\n    | 'double'\n    | 'string_array'\n    | 'bool_array'\n    | 'int_array'\n    | 'double_array';\n}\n\nexport interface ExperimentalResourceDetection {\n  /**\n   * Configure attributes provided by resource detectors.\n   */\n  attributes?: IncludeExclude;\n\n  /**\n   * Configure resource detectors.\n   * Resource detector names are dependent on the SDK language ecosystem. Please consult documentation for each respective language.\n   * If omitted or null, no resource detectors are enabled.\n   */\n  detectors?: ExperimentalResourceDetector;\n}\n\nexport interface ExperimentalResourceDetector {\n  /**\n   * Enable the container resource detector, which populates container.* attributes.\n   */\n  container?: object;\n\n  /**\n   * Enable the host resource detector, which populates host.* and os.* attributes.\n   */\n  host?: object;\n\n  /**\n   * Enable the process resource detector, which populates process.* attributes.\n   */\n  process?: object;\n\n  /**\n   * Enable the service detector, which populates service.name based on the OTEL_SERVICE_NAME\n   * environment variable and service.instance.id.\n   */\n  service?: object;\n}\n"]}
+{"version":3,"file":"resourceModel.js","sourceRoot":"","sources":["../../../src/models/resourceModel.ts"],"names":[],"mappings":"AAAA;;;GAGG;AACH,YAAY,CAAC","sourcesContent":["/*\n * Copyright The OpenTelemetry Authors\n * SPDX-License-Identifier: Apache-2.0\n */\n'use strict';\n\nimport { IncludeExclude } from './commonModel';\n\nexport interface Resource {\n  /**\n   * Configure resource attributes. Entries have higher priority than entries from .resource.attributes_list.\n   * Entries must contain .name and .value, and may optionally include .type. If an entry's .type omitted or null, string is used.\n   * The .value's type must match the .type. Values for .type include: string, bool, int, double, string_array, bool_array, int_array, double_array.\n   */\n  attributes?: AttributeNameValue[];\n\n  /**\n   * Configure resource attributes. Entries have lower priority than entries from .resource.attributes.\n   * The value is a list of comma separated key-value pairs matching the format of OTEL_RESOURCE_ATTRIBUTES.\n   * If omitted or null, no resource attributes are added.\n   */\n  attributes_list?: string;\n\n  /**\n   * Configure resource schema URL.\n   * If omitted or null, no schema URL is used.\n   */\n  schema_url?: string;\n\n  /**\n   * Configure resource detection.\n   * This type is in development and subject to breaking changes in minor versions.\n   * If omitted or null, resource detection is disabled.\n   */\n  'detection/development'?: ExperimentalResourceDetection;\n}\n\nexport interface AttributeNameValue {\n  name: string;\n  value:\n    | string\n    | boolean\n    | number\n    | string[]\n    | boolean[]\n    | number[]\n    | undefined;\n  type?:\n    | 'string'\n    | 'bool'\n    | 'int'\n    | 'double'\n    | 'string_array'\n    | 'bool_array'\n    | 'int_array'\n    | 'double_array';\n}\n\nexport interface ExperimentalResourceDetection {\n  /**\n   * Configure attributes provided by resource detectors.\n   */\n  attributes?: IncludeExclude;\n\n  /**\n   * Configure resource detectors.\n   * Resource detector names are dependent on the SDK language ecosystem. Please consult documentation for each respective language.\n   * If omitted or null, no resource detectors are enabled.\n   */\n  detectors?: ExperimentalResourceDetector;\n}\n\nexport interface ExperimentalResourceDetector {\n  /**\n   * Enable the container resource detector, which populates container.* attributes.\n   */\n  container?: object;\n\n  /**\n   * Enable the host resource detector, which populates host.* and os.* attributes.\n   */\n  host?: object;\n\n  /**\n   * Enable the process resource detector, which populates process.* attributes.\n   */\n  process?: object;\n\n  /**\n   * Enable the service detector, which populates service.name based on the OTEL_SERVICE_NAME\n   * environment variable and service.instance.id.\n   */\n  service?: object;\n}\n"]}

package/build/src/models/tracerProviderModel.js

@@ -1,17 +1,6 @@
 /*
  * Copyright The OpenTelemetry Authors
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      https://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
+ * SPDX-License-Identifier: Apache-2.0
  */
 'use strict';
 Object.defineProperty(exports, "__esModule", { value: true });

package/build/src/models/tracerProviderModel.js.map

@@ -1 +1 @@
-{"version":3,"file":"tracerProviderModel.js","sourceRoot":"","sources":["../../../src/models/tracerProviderModel.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;GAcG;AACH,YAAY,CAAC;;;AAQb,SAAgB,4CAA4C;IAC1D,OAAO;QACL,UAAU,EAAE,EAAE;QACd,MAAM,EAAE;YACN,qBAAqB,EAAE,GAAG;YAC1B,iBAAiB,EAAE,GAAG;YACtB,gBAAgB,EAAE,GAAG;YACrB,2BAA2B,EAAE,GAAG;YAChC,0BAA0B,EAAE,GAAG;SAChC;QACD,OAAO,EAAE;YACP,YAAY,EAAE;gBACZ,IAAI,EAAE,EAAE,SAAS,EAAE,SAAS,EAAE;gBAC9B,qBAAqB,EAAE,EAAE,SAAS,EAAE,SAAS,EAAE;gBAC/C,yBAAyB,EAAE,EAAE,UAAU,EAAE,SAAS,EAAE;gBACpD,oBAAoB,EAAE,EAAE,SAAS,EAAE,SAAS,EAAE;gBAC9C,wBAAwB,EAAE,EAAE,UAAU,EAAE,SAAS,EAAE;aACpD;SACF;KACF,CAAC;AACJ,CAAC;AApBD,oGAoBC","sourcesContent":["/*\n * Copyright The OpenTelemetry Authors\n *\n * Licensed under the Apache License, Version 2.0 (the \"License\");\n * you may not use this file except in compliance with the License.\n * You may obtain a copy of the License at\n *\n *      https://www.apache.org/licenses/LICENSE-2.0\n *\n * Unless required by applicable law or agreed to in writing, software\n * distributed under the License is distributed on an \"AS IS\" BASIS,\n * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n * See the License for the specific language governing permissions and\n * limitations under the License.\n */\n'use strict';\n\nimport {\n  ExperimentalOtlpFileExporter,\n  OtlpGrpcExporter,\n  OtlpHttpExporter,\n} from './commonModel';\n\nexport function initializeDefaultTracerProviderConfiguration(): Required<TracerProvider> {\n  return {\n    processors: [],\n    limits: {\n      attribute_count_limit: 128,\n      event_count_limit: 128,\n      link_count_limit: 128,\n      event_attribute_count_limit: 128,\n      link_attribute_count_limit: 128,\n    },\n    sampler: {\n      parent_based: {\n        root: { always_on: undefined },\n        remote_parent_sampled: { always_on: undefined },\n        remote_parent_not_sampled: { always_off: undefined },\n        local_parent_sampled: { always_on: undefined },\n        local_parent_not_sampled: { always_off: undefined },\n      },\n    },\n  };\n}\n\nexport interface TracerProvider {\n  /**\n   * Configure span processors.\n   */\n  processors: SpanProcessor[];\n\n  /**\n   * Configure span limits. See also attribute_limits.\n   */\n  limits?: SpanLimits;\n\n  /**\n   * Configure the sampler.\n   * If omitted, parent based sampler with a root of always_on is used.\n   */\n  sampler?: Sampler;\n}\n\nexport interface BatchSpanProcessor {\n  /**\n   * Configure delay interval (in milliseconds) between two consecutive exports.\n   * Value must be non-negative.\n   * If omitted or null, 5000 is used for traces and 1000 for logs.\n   */\n  schedule_delay?: number;\n\n  /**\n   * Configure maximum allowed time (in milliseconds) to export data.\n   * Value must be non-negative. A value of 0 indicates no limit (infinity).\n   * If omitted or null, 30000 is used.\n   */\n  export_timeout?: number;\n\n  /**\n   * Configure maximum queue size. Value must be positive.\n   * If omitted or null, 2048 is used.\n   */\n  max_queue_size?: number;\n\n  /**\n   * Configure maximum batch size. Value must be positive.\n   * If omitted or null, 512 is used.\n   */\n  max_export_batch_size?: number;\n\n  /**\n   * Configure exporter.\n   */\n  exporter: SpanExporter;\n}\n\nexport interface Sampler {\n  /**\n   * Configure sampler to be parent_based.\n   */\n  parent_based?: ParentBasedSampler;\n\n  /**\n   * Configure sampler to be always_off.\n   */\n  always_off?: object;\n\n  /**\n   * Configure sampler to be always_on.\n   */\n  always_on?: object;\n\n  /***\n   * Configure sampler to be trace_id_ratio_based.\n   */\n  trace_id_ratio_based?: TraceIdRatioBasedSampler;\n}\n\nexport interface ParentBasedSampler {\n  /**\n   * Configure root sampler.\n   * If omitted or null, always_on is used.\n   */\n  root?: Sampler;\n\n  /**\n   * Configure remote_parent_sampled sampler.\n   * If omitted or null, always_on is used.\n   */\n  remote_parent_sampled?: Sampler;\n\n  /**\n   * Configure remote_parent_not_sampled sampler.\n   * If omitted or null, always_off is used.\n   */\n  remote_parent_not_sampled?: Sampler;\n\n  /**\n   * Configure local_parent_sampled sampler.\n   * If omitted or null, always_on is used.\n   */\n  local_parent_sampled?: Sampler;\n\n  /**\n   * Configure local_parent_not_sampled sampler.\n   * If omitted or null, always_off is used.\n   */\n  local_parent_not_sampled?: Sampler;\n}\n\nexport interface TraceIdRatioBasedSampler {\n  /**\n   * Configure trace_id_ratio.\n   */\n  ratio?: number;\n}\n\nexport interface SimpleSpanProcessor {\n  /**\n   * Configure exporter.\n   */\n  exporter: SpanExporter;\n}\n\nexport interface SpanExporter {\n  /**\n   * Configure exporter to be OTLP with HTTP transport.\n   */\n  otlp_http?: OtlpHttpExporter;\n\n  /**\n   * Configure exporter to be OTLP with gRPC transport.\n   */\n  otlp_grpc?: OtlpGrpcExporter;\n\n  /**\n   * Configure exporter to be OTLP with file transport.\n   * This type is in development and subject to breaking changes in minor versions.\n   */\n  'otlp_file/development'?: ExperimentalOtlpFileExporter;\n\n  /**\n   * Configure exporter to be console.\n   */\n  console?: object;\n}\n\nexport interface SpanLimits {\n  /**\n   * Configure max attribute value size. Overrides .attribute_limits.attribute_value_length_limit.\n   * Value must be non-negative.\n   * If omitted or null, there is no limit.\n   */\n  attribute_value_length_limit?: number;\n\n  /**\n   * Configure max attribute count. Overrides .attribute_limits.attribute_count_limit.\n   * Value must be non-negative.\n   * If omitted or null, 128 is used.\n   */\n  attribute_count_limit?: number;\n\n  /**\n   * Configure max span event count.\n   * Value must be non-negative.\n   * If omitted or null, 128 is used.\n   */\n  event_count_limit?: number;\n\n  /**\n   * Configure max span link count.\n   * Value must be non-negative.\n   * If omitted or null, 128 is used.\n   */\n  link_count_limit?: number;\n\n  /**\n   * Configure max attributes per span event.\n   * Value must be non-negative.\n   * If omitted or null, 128 is used.\n   */\n  event_attribute_count_limit?: number;\n\n  /**\n   * Configure max attributes per span link.\n   * Value must be non-negative.\n   * If omitted or null, 128 is used.\n   */\n  link_attribute_count_limit?: number;\n}\n\nexport interface SpanProcessor {\n  /**\n   * Configure a batch span processor.\n   */\n  batch?: BatchSpanProcessor;\n\n  /**\n   * Configure a simple span processor.\n   */\n  simple?: SimpleSpanProcessor;\n}\n"]}
+{"version":3,"file":"tracerProviderModel.js","sourceRoot":"","sources":["../../../src/models/tracerProviderModel.ts"],"names":[],"mappings":"AAAA;;;GAGG;AACH,YAAY,CAAC;;;AAQb,SAAgB,4CAA4C;IAC1D,OAAO;QACL,UAAU,EAAE,EAAE;QACd,MAAM,EAAE;YACN,qBAAqB,EAAE,GAAG;YAC1B,iBAAiB,EAAE,GAAG;YACtB,gBAAgB,EAAE,GAAG;YACrB,2BAA2B,EAAE,GAAG;YAChC,0BAA0B,EAAE,GAAG;SAChC;QACD,OAAO,EAAE;YACP,YAAY,EAAE;gBACZ,IAAI,EAAE,EAAE,SAAS,EAAE,SAAS,EAAE;gBAC9B,qBAAqB,EAAE,EAAE,SAAS,EAAE,SAAS,EAAE;gBAC/C,yBAAyB,EAAE,EAAE,UAAU,EAAE,SAAS,EAAE;gBACpD,oBAAoB,EAAE,EAAE,SAAS,EAAE,SAAS,EAAE;gBAC9C,wBAAwB,EAAE,EAAE,UAAU,EAAE,SAAS,EAAE;aACpD;SACF;KACF,CAAC;AACJ,CAAC;AApBD,oGAoBC","sourcesContent":["/*\n * Copyright The OpenTelemetry Authors\n * SPDX-License-Identifier: Apache-2.0\n */\n'use strict';\n\nimport {\n  ExperimentalOtlpFileExporter,\n  OtlpGrpcExporter,\n  OtlpHttpExporter,\n} from './commonModel';\n\nexport function initializeDefaultTracerProviderConfiguration(): Required<TracerProvider> {\n  return {\n    processors: [],\n    limits: {\n      attribute_count_limit: 128,\n      event_count_limit: 128,\n      link_count_limit: 128,\n      event_attribute_count_limit: 128,\n      link_attribute_count_limit: 128,\n    },\n    sampler: {\n      parent_based: {\n        root: { always_on: undefined },\n        remote_parent_sampled: { always_on: undefined },\n        remote_parent_not_sampled: { always_off: undefined },\n        local_parent_sampled: { always_on: undefined },\n        local_parent_not_sampled: { always_off: undefined },\n      },\n    },\n  };\n}\n\nexport interface TracerProvider {\n  /**\n   * Configure span processors.\n   */\n  processors: SpanProcessor[];\n\n  /**\n   * Configure span limits. See also attribute_limits.\n   */\n  limits?: SpanLimits;\n\n  /**\n   * Configure the sampler.\n   * If omitted, parent based sampler with a root of always_on is used.\n   */\n  sampler?: Sampler;\n}\n\nexport interface BatchSpanProcessor {\n  /**\n   * Configure delay interval (in milliseconds) between two consecutive exports.\n   * Value must be non-negative.\n   * If omitted or null, 5000 is used for traces and 1000 for logs.\n   */\n  schedule_delay?: number;\n\n  /**\n   * Configure maximum allowed time (in milliseconds) to export data.\n   * Value must be non-negative. A value of 0 indicates no limit (infinity).\n   * If omitted or null, 30000 is used.\n   */\n  export_timeout?: number;\n\n  /**\n   * Configure maximum queue size. Value must be positive.\n   * If omitted or null, 2048 is used.\n   */\n  max_queue_size?: number;\n\n  /**\n   * Configure maximum batch size. Value must be positive.\n   * If omitted or null, 512 is used.\n   */\n  max_export_batch_size?: number;\n\n  /**\n   * Configure exporter.\n   */\n  exporter: SpanExporter;\n}\n\nexport interface Sampler {\n  /**\n   * Configure sampler to be parent_based.\n   */\n  parent_based?: ParentBasedSampler;\n\n  /**\n   * Configure sampler to be always_off.\n   */\n  always_off?: object;\n\n  /**\n   * Configure sampler to be always_on.\n   */\n  always_on?: object;\n\n  /***\n   * Configure sampler to be trace_id_ratio_based.\n   */\n  trace_id_ratio_based?: TraceIdRatioBasedSampler;\n}\n\nexport interface ParentBasedSampler {\n  /**\n   * Configure root sampler.\n   * If omitted or null, always_on is used.\n   */\n  root?: Sampler;\n\n  /**\n   * Configure remote_parent_sampled sampler.\n   * If omitted or null, always_on is used.\n   */\n  remote_parent_sampled?: Sampler;\n\n  /**\n   * Configure remote_parent_not_sampled sampler.\n   * If omitted or null, always_off is used.\n   */\n  remote_parent_not_sampled?: Sampler;\n\n  /**\n   * Configure local_parent_sampled sampler.\n   * If omitted or null, always_on is used.\n   */\n  local_parent_sampled?: Sampler;\n\n  /**\n   * Configure local_parent_not_sampled sampler.\n   * If omitted or null, always_off is used.\n   */\n  local_parent_not_sampled?: Sampler;\n}\n\nexport interface TraceIdRatioBasedSampler {\n  /**\n   * Configure trace_id_ratio.\n   */\n  ratio?: number;\n}\n\nexport interface SimpleSpanProcessor {\n  /**\n   * Configure exporter.\n   */\n  exporter: SpanExporter;\n}\n\nexport interface SpanExporter {\n  /**\n   * Configure exporter to be OTLP with HTTP transport.\n   */\n  otlp_http?: OtlpHttpExporter;\n\n  /**\n   * Configure exporter to be OTLP with gRPC transport.\n   */\n  otlp_grpc?: OtlpGrpcExporter;\n\n  /**\n   * Configure exporter to be OTLP with file transport.\n   * This type is in development and subject to breaking changes in minor versions.\n   */\n  'otlp_file/development'?: ExperimentalOtlpFileExporter;\n\n  /**\n   * Configure exporter to be console.\n   */\n  console?: object;\n}\n\nexport interface SpanLimits {\n  /**\n   * Configure max attribute value size. Overrides .attribute_limits.attribute_value_length_limit.\n   * Value must be non-negative.\n   * If omitted or null, there is no limit.\n   */\n  attribute_value_length_limit?: number;\n\n  /**\n   * Configure max attribute count. Overrides .attribute_limits.attribute_count_limit.\n   * Value must be non-negative.\n   * If omitted or null, 128 is used.\n   */\n  attribute_count_limit?: number;\n\n  /**\n   * Configure max span event count.\n   * Value must be non-negative.\n   * If omitted or null, 128 is used.\n   */\n  event_count_limit?: number;\n\n  /**\n   * Configure max span link count.\n   * Value must be non-negative.\n   * If omitted or null, 128 is used.\n   */\n  link_count_limit?: number;\n\n  /**\n   * Configure max attributes per span event.\n   * Value must be non-negative.\n   * If omitted or null, 128 is used.\n   */\n  event_attribute_count_limit?: number;\n\n  /**\n   * Configure max attributes per span link.\n   * Value must be non-negative.\n   * If omitted or null, 128 is used.\n   */\n  link_attribute_count_limit?: number;\n}\n\nexport interface SpanProcessor {\n  /**\n   * Configure a batch span processor.\n   */\n  batch?: BatchSpanProcessor;\n\n  /**\n   * Configure a simple span processor.\n   */\n  simple?: SimpleSpanProcessor;\n}\n"]}

package/build/src/utils.js

@@ -3,18 +3,7 @@ Object.defineProperty(exports, "__esModule", { value: true });
 exports.getHttpTlsConfig = exports.getGrpcTlsConfig = exports.envVariableSubstitution = exports.getStringListFromConfigFile = exports.getStringFromConfigFile = exports.getNumberListFromConfigFile = exports.getNumberFromConfigFile = exports.getBooleanListFromConfigFile = exports.getBooleanFromConfigFile = void 0;
 /*
  * Copyright The OpenTelemetry Authors
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      https://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
+ * SPDX-License-Identifier: Apache-2.0
  */
 const api_1 = require("@opentelemetry/api");
 const core_1 = require("@opentelemetry/core");

package/build/src/utils.js.map

@@ -1 +1 @@
-{"version":3,"file":"utils.js","sourceRoot":"","sources":["../../src/utils.ts"],"names":[],"mappings":";;;AAAA;;;;;;;;;;;;;;GAcG;AACH,4CAA0C;AAC1C,8CAAuD;AACvD,+BAA+B;AAG/B;;;;;;;;GAQG;AACH,SAAgB,wBAAwB,CAAC,KAAc;IACrD,MAAM,GAAG,GAAG,uBAAuB,CAAC,KAAK,CAAC,EAAE,IAAI,EAAE,CAAC,WAAW,EAAE,CAAC;IACjE,IAAI,GAAG,KAAK,MAAM,EAAE;QAClB,OAAO,IAAI,CAAC;KACb;SAAM,IAAI,GAAG,KAAK,OAAO,EAAE;QAC1B,OAAO,KAAK,CAAC;KACd;SAAM,IAAI,GAAG,IAAI,IAAI,IAAI,GAAG,KAAK,EAAE,EAAE;QACpC,OAAO,SAAS,CAAC;KAClB;SAAM;QACL,UAAI,CAAC,IAAI,CAAC,iBAAiB,IAAA,cAAO,EAAC,GAAG,CAAC,8BAA8B,CAAC,CAAC;QACvE,OAAO,SAAS,CAAC;KAClB;AACH,CAAC;AAZD,4DAYC;AAED;;;;;;;;;;GAUG;AACH,SAAgB,4BAA4B,CAC1C,KAAc;IAEd,MAAM,IAAI,GAAG,uBAAuB,CAAC,KAAK,CAAC,EAAE,KAAK,CAAC,GAAG,CAAC,CAAC;IACxD,IAAI,IAAI,EAAE;QACR,MAAM,YAAY,GAAG,EAAE,CAAC;QACxB,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE;YACpC,MAAM,OAAO,GAAG,wBAAwB,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC;YAClD,IAAI,OAAO,IAAI,IAAI,EAAE;gBACnB,YAAY,CAAC,IAAI,CAAC,OAAO,CAAC,CAAC;aAC5B;SACF;QACD,OAAO,YAAY,CAAC;KACrB;IACD,OAAO,IAAI,CAAC;AACd,CAAC;AAfD,oEAeC;AAED;;;;;;;;GAQG;AACH,SAAgB,uBAAuB,CAAC,KAAc;IACpD,MAAM,GAAG,GAAG,uBAAuB,CAAC,KAAK,CAAC,EAAE,IAAI,EAAE,CAAC;IACnD,IAAI,GAAG,IAAI,IAAI,IAAI,GAAG,CAAC,IAAI,EAAE,KAAK,EAAE,EAAE;QACpC,OAAO,SAAS,CAAC;KAClB;IAED,MAAM,CAAC,GAAG,MAAM,CAAC,GAAG,CAAC,CAAC;IACtB,IAAI,KAAK,CAAC,CAAC,CAAC,EAAE;QACZ,UAAI,CAAC,IAAI,CAAC,iBAAiB,IAAA,cAAO,EAAC,GAAG,CAAC,qBAAqB,CAAC,CAAC;QAC9D,OAAO,SAAS,CAAC;KAClB;IAED,OAAO,CAAC,CAAC;AACX,CAAC;AAbD,0DAaC;AAED;;;;;;;;;;GAUG;AACH,SAAgB,2BAA2B,CACzC,KAAc;IAEd,MAAM,IAAI,GAAG,uBAAuB,CAAC,KAAK,CAAC,EAAE,KAAK,CAAC,GAAG,CAAC,CAAC;IACxD,IAAI,IAAI,EAAE;QACR,MAAM,YAAY,GAAG,EAAE,CAAC;QACxB,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE;YACpC,MAAM,OAAO,GAAG,uBAAuB,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC;YACjD,IAAI,OAAO,IAAI,OAAO,KAAK,CAAC,EAAE;gBAC5B,YAAY,CAAC,IAAI,CAAC,OAAO,CAAC,CAAC;aAC5B;SACF;QACD,OAAO,YAAY,CAAC;KACrB;IACD,OAAO,IAAI,CAAC;AACd,CAAC;AAfD,kEAeC;AAED;;;;;;GAMG;AACH,SAAgB,uBAAuB,CAAC,KAAc;IACpD,MAAM,GAAG,GAAG,uBAAuB,CAAC,KAAK,CAAC,EAAE,IAAI,EAAE,CAAC;IACnD,IAAI,KAAK,IAAI,IAAI,IAAI,GAAG,KAAK,EAAE,EAAE;QAC/B,OAAO,SAAS,CAAC;KAClB;IACD,OAAO,GAAG,CAAC;AACb,CAAC;AAND,0DAMC;AAED;;;;;;;;;;GAUG;AACH,SAAgB,2BAA2B,CACzC,KAAc;IAEd,KAAK,GAAG,uBAAuB,CAAC,KAAK,CAAC,CAAC;IACvC,OAAO,uBAAuB,CAAC,KAAK,CAAC;QACnC,EAAE,KAAK,CAAC,GAAG,CAAC;SACX,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC;SAClB,MAAM,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,KAAK,EAAE,CAAC,CAAC;AAC3B,CAAC;AARD,kEAQC;AAED,SAAgB,uBAAuB,CAAC,KAAc;IACpD,IAAI,KAAK,IAAI,IAAI,EAAE;QACjB,OAAO,SAAS,CAAC;KAClB;IAED,MAAM,OAAO,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC,KAAK,CAAC,4BAA4B,CAAC,CAAC;IAClE,IAAI,OAAO,EAAE;QACX,IAAI,WAAW,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC;QAChC,KAAK,MAAM,KAAK,IAAI,OAAO,EAAE;YAC3B,MAAM,CAAC,GAAG,KAAK,CAAC,SAAS,CAAC,CAAC,EAAE,KAAK,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC,KAAK,CAAC,IAAI,CAAC,CAAC;YAC3D,MAAM,YAAY,GAAG,CAAC,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC;YAChD,MAAM,WAAW,GAAG,IAAA,uBAAgB,EAAC,CAAC,CAAC,CAAC,CAAC,CAAC,IAAI,YAAY,CAAC;YAC3D,WAAW,GAAG,WAAW,CAAC,OAAO,CAAC,KAAK,EAAE,WAAW,CAAC,CAAC;SACvD;QACD,OAAO,WAAW,CAAC;KACpB;IACD,OAAO,MAAM,CAAC,KAAK,CAAC,CAAC;AACvB,CAAC;AAjBD,0DAiBC;AAED,SAAgB,gBAAgB,CAC9B,eAAwB,EACxB,aAAsB,EACtB,qBAA8B,EAC9B,QAAkB;IAElB,IAAI,eAAe,IAAI,aAAa,IAAI,qBAAqB,EAAE;QAC7D,MAAM,GAAG,GAAY,EAAE,CAAC;QACxB,IAAI,eAAe,EAAE;YACnB,GAAG,CAAC,OAAO,GAAG,eAAe,CAAC;SAC/B;QACD,IAAI,aAAa,EAAE;YACjB,GAAG,CAAC,QAAQ,GAAG,aAAa,CAAC;SAC9B;QACD,IAAI,qBAAqB,EAAE;YACzB,GAAG,CAAC,SAAS,GAAG,qBAAqB,CAAC;SACvC;QACD,IAAI,QAAQ,KAAK,SAAS,EAAE;YAC1B,GAAG,CAAC,QAAQ,GAAG,QAAQ,CAAC;SACzB;QACD,OAAO,GAAG,CAAC;KACZ;IACD,OAAO,SAAS,CAAC;AACnB,CAAC;AAvBD,4CAuBC;AAED,SAAgB,gBAAgB,CAC9B,eAAwB,EACxB,aAAsB,EACtB,qBAA8B;IAE9B,IAAI,eAAe,IAAI,aAAa,IAAI,qBAAqB,EAAE;QAC7D,MAAM,GAAG,GAAY,EAAE,CAAC;QACxB,IAAI,eAAe,EAAE;YACnB,GAAG,CAAC,OAAO,GAAG,eAAe,CAAC;SAC/B;QACD,IAAI,aAAa,EAAE;YACjB,GAAG,CAAC,QAAQ,GAAG,aAAa,CAAC;SAC9B;QACD,IAAI,qBAAqB,EAAE;YACzB,GAAG,CAAC,SAAS,GAAG,qBAAqB,CAAC;SACvC;QACD,OAAO,GAAG,CAAC;KACZ;IACD,OAAO,SAAS,CAAC;AACnB,CAAC;AAnBD,4CAmBC","sourcesContent":["/*\n * Copyright The OpenTelemetry Authors\n *\n * Licensed under the Apache License, Version 2.0 (the \"License\");\n * you may not use this file except in compliance with the License.\n * You may obtain a copy of the License at\n *\n *      https://www.apache.org/licenses/LICENSE-2.0\n *\n * Unless required by applicable law or agreed to in writing, software\n * distributed under the License is distributed on an \"AS IS\" BASIS,\n * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n * See the License for the specific language governing permissions and\n * limitations under the License.\n */\nimport { diag } from '@opentelemetry/api';\nimport { getStringFromEnv } from '@opentelemetry/core';\nimport { inspect } from 'util';\nimport { GrpcTls, HttpTls } from './models/commonModel';\n\n/**\n * Retrieves a boolean value from a configuration file parameter.\n * - Trims leading and trailing whitespace and ignores casing.\n * - Returns `undefined` if the value is empty, unset, or contains only whitespace.\n * - Returns `undefined` and a warning for values that cannot be mapped to a boolean.\n *\n * @param {unknown} value - The value from the config file.\n * @returns {boolean} - The boolean value or `false` if the environment variable is unset empty, unset, or contains only whitespace.\n */\nexport function getBooleanFromConfigFile(value: unknown): boolean | undefined {\n  const raw = envVariableSubstitution(value)?.trim().toLowerCase();\n  if (raw === 'true') {\n    return true;\n  } else if (raw === 'false') {\n    return false;\n  } else if (raw == null || raw === '') {\n    return undefined;\n  } else {\n    diag.warn(`Unknown value ${inspect(raw)}, expected 'true' or 'false'`);\n    return undefined;\n  }\n}\n\n/**\n * Retrieves a list of booleans from a configuration file parameter.\n * - Uses ',' as the delimiter.\n * - Trims leading and trailing whitespace from each entry.\n * - Excludes empty entries.\n * - Returns `undefined` if the variable is empty or contains only whitespace.\n * - Returns an empty array if all entries are empty or whitespace.\n *\n * @param {unknown} value - The value from the config file.\n * @returns {boolean[] | undefined} - The list of strings or `undefined`.\n */\nexport function getBooleanListFromConfigFile(\n  value: unknown\n): boolean[] | undefined {\n  const list = getStringFromConfigFile(value)?.split(',');\n  if (list) {\n    const filteredList = [];\n    for (let i = 0; i < list.length; i++) {\n      const element = getBooleanFromConfigFile(list[i]);\n      if (element != null) {\n        filteredList.push(element);\n      }\n    }\n    return filteredList;\n  }\n  return list;\n}\n\n/**\n * Retrieves a number from a configuration file parameter.\n * - Returns `undefined` if the environment variable is empty, unset, or contains only whitespace.\n * - Returns `undefined` and a warning if is not a number.\n * - Returns a number in all other cases.\n *\n * @param {unknown} value - The value from the config file.\n * @returns {number | undefined} - The number value or `undefined`.\n */\nexport function getNumberFromConfigFile(value: unknown): number | undefined {\n  const raw = envVariableSubstitution(value)?.trim();\n  if (raw == null || raw.trim() === '') {\n    return undefined;\n  }\n\n  const n = Number(raw);\n  if (isNaN(n)) {\n    diag.warn(`Unknown value ${inspect(raw)}, expected a number`);\n    return undefined;\n  }\n\n  return n;\n}\n\n/**\n * Retrieves a list of numbers from a configuration file parameter.\n * - Uses ',' as the delimiter.\n * - Trims leading and trailing whitespace from each entry.\n * - Excludes empty entries.\n * - Returns `undefined` if the variable is empty or contains only whitespace.\n * - Returns an empty array if all entries are empty or whitespace.\n *\n * @param {unknown} value - The value from the config file.\n * @returns {number[] | undefined} - The list of numbers or `undefined`.\n */\nexport function getNumberListFromConfigFile(\n  value: unknown\n): number[] | undefined {\n  const list = getStringFromConfigFile(value)?.split(',');\n  if (list) {\n    const filteredList = [];\n    for (let i = 0; i < list.length; i++) {\n      const element = getNumberFromConfigFile(list[i]);\n      if (element || element === 0) {\n        filteredList.push(element);\n      }\n    }\n    return filteredList;\n  }\n  return list;\n}\n\n/**\n * Retrieves a string from a configuration file parameter.\n * - Returns `undefined` if the variable is empty, unset, or contains only whitespace.\n *\n * @param {unknown} value - The value from the config file.\n * @returns {string | undefined} - The string value or `undefined`.\n */\nexport function getStringFromConfigFile(value: unknown): string | undefined {\n  const raw = envVariableSubstitution(value)?.trim();\n  if (value == null || raw === '') {\n    return undefined;\n  }\n  return raw;\n}\n\n/**\n * Retrieves a list of strings from a configuration file parameter.\n * - Uses ',' as the delimiter.\n * - Trims leading and trailing whitespace from each entry.\n * - Excludes empty entries.\n * - Returns `undefined` if the variable is empty or contains only whitespace.\n * - Returns an empty array if all entries are empty or whitespace.\n *\n * @param {unknown} value - The value from the config file.\n * @returns {string[] | undefined} - The list of strings or `undefined`.\n */\nexport function getStringListFromConfigFile(\n  value: unknown\n): string[] | undefined {\n  value = envVariableSubstitution(value);\n  return getStringFromConfigFile(value)\n    ?.split(',')\n    .map(v => v.trim())\n    .filter(s => s !== '');\n}\n\nexport function envVariableSubstitution(value: unknown): string | undefined {\n  if (value == null) {\n    return undefined;\n  }\n\n  const matches = String(value).match(/\\$\\{[a-zA-Z0-9,=/_:.-]*\\}/g);\n  if (matches) {\n    let stringValue = String(value);\n    for (const match of matches) {\n      const v = match.substring(2, match.length - 1).split(':-');\n      const defaultValue = v.length === 2 ? v[1] : '';\n      const replacement = getStringFromEnv(v[0]) || defaultValue;\n      stringValue = stringValue.replace(match, replacement);\n    }\n    return stringValue;\n  }\n  return String(value);\n}\n\nexport function getGrpcTlsConfig(\n  certificateFile?: string,\n  clientKeyFile?: string,\n  clientCertificateFile?: string,\n  insecure?: boolean\n): GrpcTls | undefined {\n  if (certificateFile || clientKeyFile || clientCertificateFile) {\n    const tls: GrpcTls = {};\n    if (certificateFile) {\n      tls.ca_file = certificateFile;\n    }\n    if (clientKeyFile) {\n      tls.key_file = clientKeyFile;\n    }\n    if (clientCertificateFile) {\n      tls.cert_file = clientCertificateFile;\n    }\n    if (insecure !== undefined) {\n      tls.insecure = insecure;\n    }\n    return tls;\n  }\n  return undefined;\n}\n\nexport function getHttpTlsConfig(\n  certificateFile?: string,\n  clientKeyFile?: string,\n  clientCertificateFile?: string\n): HttpTls | undefined {\n  if (certificateFile || clientKeyFile || clientCertificateFile) {\n    const tls: HttpTls = {};\n    if (certificateFile) {\n      tls.ca_file = certificateFile;\n    }\n    if (clientKeyFile) {\n      tls.key_file = clientKeyFile;\n    }\n    if (clientCertificateFile) {\n      tls.cert_file = clientCertificateFile;\n    }\n    return tls;\n  }\n  return undefined;\n}\n"]}
+{"version":3,"file":"utils.js","sourceRoot":"","sources":["../../src/utils.ts"],"names":[],"mappings":";;;AAAA;;;GAGG;AACH,4CAA0C;AAC1C,8CAAuD;AACvD,+BAA+B;AAG/B;;;;;;;;GAQG;AACH,SAAgB,wBAAwB,CAAC,KAAc;IACrD,MAAM,GAAG,GAAG,uBAAuB,CAAC,KAAK,CAAC,EAAE,IAAI,EAAE,CAAC,WAAW,EAAE,CAAC;IACjE,IAAI,GAAG,KAAK,MAAM,EAAE;QAClB,OAAO,IAAI,CAAC;KACb;SAAM,IAAI,GAAG,KAAK,OAAO,EAAE;QAC1B,OAAO,KAAK,CAAC;KACd;SAAM,IAAI,GAAG,IAAI,IAAI,IAAI,GAAG,KAAK,EAAE,EAAE;QACpC,OAAO,SAAS,CAAC;KAClB;SAAM;QACL,UAAI,CAAC,IAAI,CAAC,iBAAiB,IAAA,cAAO,EAAC,GAAG,CAAC,8BAA8B,CAAC,CAAC;QACvE,OAAO,SAAS,CAAC;KAClB;AACH,CAAC;AAZD,4DAYC;AAED;;;;;;;;;;GAUG;AACH,SAAgB,4BAA4B,CAC1C,KAAc;IAEd,MAAM,IAAI,GAAG,uBAAuB,CAAC,KAAK,CAAC,EAAE,KAAK,CAAC,GAAG,CAAC,CAAC;IACxD,IAAI,IAAI,EAAE;QACR,MAAM,YAAY,GAAG,EAAE,CAAC;QACxB,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE;YACpC,MAAM,OAAO,GAAG,wBAAwB,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC;YAClD,IAAI,OAAO,IAAI,IAAI,EAAE;gBACnB,YAAY,CAAC,IAAI,CAAC,OAAO,CAAC,CAAC;aAC5B;SACF;QACD,OAAO,YAAY,CAAC;KACrB;IACD,OAAO,IAAI,CAAC;AACd,CAAC;AAfD,oEAeC;AAED;;;;;;;;GAQG;AACH,SAAgB,uBAAuB,CAAC,KAAc;IACpD,MAAM,GAAG,GAAG,uBAAuB,CAAC,KAAK,CAAC,EAAE,IAAI,EAAE,CAAC;IACnD,IAAI,GAAG,IAAI,IAAI,IAAI,GAAG,CAAC,IAAI,EAAE,KAAK,EAAE,EAAE;QACpC,OAAO,SAAS,CAAC;KAClB;IAED,MAAM,CAAC,GAAG,MAAM,CAAC,GAAG,CAAC,CAAC;IACtB,IAAI,KAAK,CAAC,CAAC,CAAC,EAAE;QACZ,UAAI,CAAC,IAAI,CAAC,iBAAiB,IAAA,cAAO,EAAC,GAAG,CAAC,qBAAqB,CAAC,CAAC;QAC9D,OAAO,SAAS,CAAC;KAClB;IAED,OAAO,CAAC,CAAC;AACX,CAAC;AAbD,0DAaC;AAED;;;;;;;;;;GAUG;AACH,SAAgB,2BAA2B,CACzC,KAAc;IAEd,MAAM,IAAI,GAAG,uBAAuB,CAAC,KAAK,CAAC,EAAE,KAAK,CAAC,GAAG,CAAC,CAAC;IACxD,IAAI,IAAI,EAAE;QACR,MAAM,YAAY,GAAG,EAAE,CAAC;QACxB,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE;YACpC,MAAM,OAAO,GAAG,uBAAuB,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC;YACjD,IAAI,OAAO,IAAI,OAAO,KAAK,CAAC,EAAE;gBAC5B,YAAY,CAAC,IAAI,CAAC,OAAO,CAAC,CAAC;aAC5B;SACF;QACD,OAAO,YAAY,CAAC;KACrB;IACD,OAAO,IAAI,CAAC;AACd,CAAC;AAfD,kEAeC;AAED;;;;;;GAMG;AACH,SAAgB,uBAAuB,CAAC,KAAc;IACpD,MAAM,GAAG,GAAG,uBAAuB,CAAC,KAAK,CAAC,EAAE,IAAI,EAAE,CAAC;IACnD,IAAI,KAAK,IAAI,IAAI,IAAI,GAAG,KAAK,EAAE,EAAE;QAC/B,OAAO,SAAS,CAAC;KAClB;IACD,OAAO,GAAG,CAAC;AACb,CAAC;AAND,0DAMC;AAED;;;;;;;;;;GAUG;AACH,SAAgB,2BAA2B,CACzC,KAAc;IAEd,KAAK,GAAG,uBAAuB,CAAC,KAAK,CAAC,CAAC;IACvC,OAAO,uBAAuB,CAAC,KAAK,CAAC;QACnC,EAAE,KAAK,CAAC,GAAG,CAAC;SACX,GAAG,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC;SAClB,MAAM,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,KAAK,EAAE,CAAC,CAAC;AAC3B,CAAC;AARD,kEAQC;AAED,SAAgB,uBAAuB,CAAC,KAAc;IACpD,IAAI,KAAK,IAAI,IAAI,EAAE;QACjB,OAAO,SAAS,CAAC;KAClB;IAED,MAAM,OAAO,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC,KAAK,CAAC,4BAA4B,CAAC,CAAC;IAClE,IAAI,OAAO,EAAE;QACX,IAAI,WAAW,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC;QAChC,KAAK,MAAM,KAAK,IAAI,OAAO,EAAE;YAC3B,MAAM,CAAC,GAAG,KAAK,CAAC,SAAS,CAAC,CAAC,EAAE,KAAK,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC,KAAK,CAAC,IAAI,CAAC,CAAC;YAC3D,MAAM,YAAY,GAAG,CAAC,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC;YAChD,MAAM,WAAW,GAAG,IAAA,uBAAgB,EAAC,CAAC,CAAC,CAAC,CAAC,CAAC,IAAI,YAAY,CAAC;YAC3D,WAAW,GAAG,WAAW,CAAC,OAAO,CAAC,KAAK,EAAE,WAAW,CAAC,CAAC;SACvD;QACD,OAAO,WAAW,CAAC;KACpB;IACD,OAAO,MAAM,CAAC,KAAK,CAAC,CAAC;AACvB,CAAC;AAjBD,0DAiBC;AAED,SAAgB,gBAAgB,CAC9B,eAAwB,EACxB,aAAsB,EACtB,qBAA8B,EAC9B,QAAkB;IAElB,IAAI,eAAe,IAAI,aAAa,IAAI,qBAAqB,EAAE;QAC7D,MAAM,GAAG,GAAY,EAAE,CAAC;QACxB,IAAI,eAAe,EAAE;YACnB,GAAG,CAAC,OAAO,GAAG,eAAe,CAAC;SAC/B;QACD,IAAI,aAAa,EAAE;YACjB,GAAG,CAAC,QAAQ,GAAG,aAAa,CAAC;SAC9B;QACD,IAAI,qBAAqB,EAAE;YACzB,GAAG,CAAC,SAAS,GAAG,qBAAqB,CAAC;SACvC;QACD,IAAI,QAAQ,KAAK,SAAS,EAAE;YAC1B,GAAG,CAAC,QAAQ,GAAG,QAAQ,CAAC;SACzB;QACD,OAAO,GAAG,CAAC;KACZ;IACD,OAAO,SAAS,CAAC;AACnB,CAAC;AAvBD,4CAuBC;AAED,SAAgB,gBAAgB,CAC9B,eAAwB,EACxB,aAAsB,EACtB,qBAA8B;IAE9B,IAAI,eAAe,IAAI,aAAa,IAAI,qBAAqB,EAAE;QAC7D,MAAM,GAAG,GAAY,EAAE,CAAC;QACxB,IAAI,eAAe,EAAE;YACnB,GAAG,CAAC,OAAO,GAAG,eAAe,CAAC;SAC/B;QACD,IAAI,aAAa,EAAE;YACjB,GAAG,CAAC,QAAQ,GAAG,aAAa,CAAC;SAC9B;QACD,IAAI,qBAAqB,EAAE;YACzB,GAAG,CAAC,SAAS,GAAG,qBAAqB,CAAC;SACvC;QACD,OAAO,GAAG,CAAC;KACZ;IACD,OAAO,SAAS,CAAC;AACnB,CAAC;AAnBD,4CAmBC","sourcesContent":["/*\n * Copyright The OpenTelemetry Authors\n * SPDX-License-Identifier: Apache-2.0\n */\nimport { diag } from '@opentelemetry/api';\nimport { getStringFromEnv } from '@opentelemetry/core';\nimport { inspect } from 'util';\nimport { GrpcTls, HttpTls } from './models/commonModel';\n\n/**\n * Retrieves a boolean value from a configuration file parameter.\n * - Trims leading and trailing whitespace and ignores casing.\n * - Returns `undefined` if the value is empty, unset, or contains only whitespace.\n * - Returns `undefined` and a warning for values that cannot be mapped to a boolean.\n *\n * @param {unknown} value - The value from the config file.\n * @returns {boolean} - The boolean value or `false` if the environment variable is unset empty, unset, or contains only whitespace.\n */\nexport function getBooleanFromConfigFile(value: unknown): boolean | undefined {\n  const raw = envVariableSubstitution(value)?.trim().toLowerCase();\n  if (raw === 'true') {\n    return true;\n  } else if (raw === 'false') {\n    return false;\n  } else if (raw == null || raw === '') {\n    return undefined;\n  } else {\n    diag.warn(`Unknown value ${inspect(raw)}, expected 'true' or 'false'`);\n    return undefined;\n  }\n}\n\n/**\n * Retrieves a list of booleans from a configuration file parameter.\n * - Uses ',' as the delimiter.\n * - Trims leading and trailing whitespace from each entry.\n * - Excludes empty entries.\n * - Returns `undefined` if the variable is empty or contains only whitespace.\n * - Returns an empty array if all entries are empty or whitespace.\n *\n * @param {unknown} value - The value from the config file.\n * @returns {boolean[] | undefined} - The list of strings or `undefined`.\n */\nexport function getBooleanListFromConfigFile(\n  value: unknown\n): boolean[] | undefined {\n  const list = getStringFromConfigFile(value)?.split(',');\n  if (list) {\n    const filteredList = [];\n    for (let i = 0; i < list.length; i++) {\n      const element = getBooleanFromConfigFile(list[i]);\n      if (element != null) {\n        filteredList.push(element);\n      }\n    }\n    return filteredList;\n  }\n  return list;\n}\n\n/**\n * Retrieves a number from a configuration file parameter.\n * - Returns `undefined` if the environment variable is empty, unset, or contains only whitespace.\n * - Returns `undefined` and a warning if is not a number.\n * - Returns a number in all other cases.\n *\n * @param {unknown} value - The value from the config file.\n * @returns {number | undefined} - The number value or `undefined`.\n */\nexport function getNumberFromConfigFile(value: unknown): number | undefined {\n  const raw = envVariableSubstitution(value)?.trim();\n  if (raw == null || raw.trim() === '') {\n    return undefined;\n  }\n\n  const n = Number(raw);\n  if (isNaN(n)) {\n    diag.warn(`Unknown value ${inspect(raw)}, expected a number`);\n    return undefined;\n  }\n\n  return n;\n}\n\n/**\n * Retrieves a list of numbers from a configuration file parameter.\n * - Uses ',' as the delimiter.\n * - Trims leading and trailing whitespace from each entry.\n * - Excludes empty entries.\n * - Returns `undefined` if the variable is empty or contains only whitespace.\n * - Returns an empty array if all entries are empty or whitespace.\n *\n * @param {unknown} value - The value from the config file.\n * @returns {number[] | undefined} - The list of numbers or `undefined`.\n */\nexport function getNumberListFromConfigFile(\n  value: unknown\n): number[] | undefined {\n  const list = getStringFromConfigFile(value)?.split(',');\n  if (list) {\n    const filteredList = [];\n    for (let i = 0; i < list.length; i++) {\n      const element = getNumberFromConfigFile(list[i]);\n      if (element || element === 0) {\n        filteredList.push(element);\n      }\n    }\n    return filteredList;\n  }\n  return list;\n}\n\n/**\n * Retrieves a string from a configuration file parameter.\n * - Returns `undefined` if the variable is empty, unset, or contains only whitespace.\n *\n * @param {unknown} value - The value from the config file.\n * @returns {string | undefined} - The string value or `undefined`.\n */\nexport function getStringFromConfigFile(value: unknown): string | undefined {\n  const raw = envVariableSubstitution(value)?.trim();\n  if (value == null || raw === '') {\n    return undefined;\n  }\n  return raw;\n}\n\n/**\n * Retrieves a list of strings from a configuration file parameter.\n * - Uses ',' as the delimiter.\n * - Trims leading and trailing whitespace from each entry.\n * - Excludes empty entries.\n * - Returns `undefined` if the variable is empty or contains only whitespace.\n * - Returns an empty array if all entries are empty or whitespace.\n *\n * @param {unknown} value - The value from the config file.\n * @returns {string[] | undefined} - The list of strings or `undefined`.\n */\nexport function getStringListFromConfigFile(\n  value: unknown\n): string[] | undefined {\n  value = envVariableSubstitution(value);\n  return getStringFromConfigFile(value)\n    ?.split(',')\n    .map(v => v.trim())\n    .filter(s => s !== '');\n}\n\nexport function envVariableSubstitution(value: unknown): string | undefined {\n  if (value == null) {\n    return undefined;\n  }\n\n  const matches = String(value).match(/\\$\\{[a-zA-Z0-9,=/_:.-]*\\}/g);\n  if (matches) {\n    let stringValue = String(value);\n    for (const match of matches) {\n      const v = match.substring(2, match.length - 1).split(':-');\n      const defaultValue = v.length === 2 ? v[1] : '';\n      const replacement = getStringFromEnv(v[0]) || defaultValue;\n      stringValue = stringValue.replace(match, replacement);\n    }\n    return stringValue;\n  }\n  return String(value);\n}\n\nexport function getGrpcTlsConfig(\n  certificateFile?: string,\n  clientKeyFile?: string,\n  clientCertificateFile?: string,\n  insecure?: boolean\n): GrpcTls | undefined {\n  if (certificateFile || clientKeyFile || clientCertificateFile) {\n    const tls: GrpcTls = {};\n    if (certificateFile) {\n      tls.ca_file = certificateFile;\n    }\n    if (clientKeyFile) {\n      tls.key_file = clientKeyFile;\n    }\n    if (clientCertificateFile) {\n      tls.cert_file = clientCertificateFile;\n    }\n    if (insecure !== undefined) {\n      tls.insecure = insecure;\n    }\n    return tls;\n  }\n  return undefined;\n}\n\nexport function getHttpTlsConfig(\n  certificateFile?: string,\n  clientKeyFile?: string,\n  clientCertificateFile?: string\n): HttpTls | undefined {\n  if (certificateFile || clientKeyFile || clientCertificateFile) {\n    const tls: HttpTls = {};\n    if (certificateFile) {\n      tls.ca_file = certificateFile;\n    }\n    if (clientKeyFile) {\n      tls.key_file = clientKeyFile;\n    }\n    if (clientCertificateFile) {\n      tls.cert_file = clientCertificateFile;\n    }\n    return tls;\n  }\n  return undefined;\n}\n"]}

package/build/src/version.d.ts

@@ -1,2 +1,2 @@
-export declare const VERSION = "0.212.0";
+export declare const VERSION = "0.213.0";
 //# sourceMappingURL=version.d.ts.map

package/build/src/version.js

@@ -17,5 +17,5 @@
 Object.defineProperty(exports, "__esModule", { value: true });
 exports.VERSION = void 0;
 // this is autogenerated file, see scripts/version-update.js
-exports.VERSION = '0.212.0';
+exports.VERSION = '0.213.0';
 //# sourceMappingURL=version.js.map

package/build/src/version.js.map

@@ -1 +1 @@
-{"version":3,"file":"version.js","sourceRoot":"","sources":["../../src/version.ts"],"names":[],"mappings":";AAAA;;;;;;;;;;;;;;GAcG;;;AAEH,4DAA4D;AAC/C,QAAA,OAAO,GAAG,SAAS,CAAC","sourcesContent":["/*\n * Copyright The OpenTelemetry Authors\n *\n * Licensed under the Apache License, Version 2.0 (the \"License\");\n * you may not use this file except in compliance with the License.\n * You may obtain a copy of the License at\n *\n *      https://www.apache.org/licenses/LICENSE-2.0\n *\n * Unless required by applicable law or agreed to in writing, software\n * distributed under the License is distributed on an \"AS IS\" BASIS,\n * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n * See the License for the specific language governing permissions and\n * limitations under the License.\n */\n\n// this is autogenerated file, see scripts/version-update.js\nexport const VERSION = '0.212.0';\n"]}
+{"version":3,"file":"version.js","sourceRoot":"","sources":["../../src/version.ts"],"names":[],"mappings":";AAAA;;;;;;;;;;;;;;GAcG;;;AAEH,4DAA4D;AAC/C,QAAA,OAAO,GAAG,SAAS,CAAC","sourcesContent":["/*\n * Copyright The OpenTelemetry Authors\n *\n * Licensed under the Apache License, Version 2.0 (the \"License\");\n * you may not use this file except in compliance with the License.\n * You may obtain a copy of the License at\n *\n *      https://www.apache.org/licenses/LICENSE-2.0\n *\n * Unless required by applicable law or agreed to in writing, software\n * distributed under the License is distributed on an \"AS IS\" BASIS,\n * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n * See the License for the specific language governing permissions and\n * limitations under the License.\n */\n\n// this is autogenerated file, see scripts/version-update.js\nexport const VERSION = '0.213.0';\n"]}

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@opentelemetry/configuration",
-  "version": "0.212.0",
+  "version": "0.213.0",
   "description": "OpenTelemetry Configuration",
   "main": "build/src/index.js",
   "types": "build/src/index.d.ts",
@@ -38,7 +38,7 @@
     "access": "public"
   },
   "dependencies": {
-    "@opentelemetry/core": "2.5.1",
+    "@opentelemetry/core": "2.6.0",
     "yaml": "^2.0.0"
   },
   "peerDependencies": {
@@ -57,5 +57,5 @@
   },
   "homepage": "https://github.com/open-telemetry/opentelemetry-js/tree/main/experimental/packages/configuration",
   "sideEffects": false,
-  "gitHead": "ad92be4c2c1094745a85b0b7eeff1444a11b1b4a"
+  "gitHead": "541e1b4ad83ad2093459794a18283228fe58d199"
 }