@openshift-assisted/locales 2.52.1 → 5.0.0-cim

package/lib/en/translation.json

@@ -49,7 +49,6 @@
   "ai:A cluster with OVN networking type cannot use 'allocate IPs via DHCP server'": "A cluster with OVN networking type cannot use 'allocate IPs via DHCP server'",
   "ai:A comma separated list of IP or domain names of the NTP pools or servers.": "A comma-separated list of IP addresses or the domain names of the NTP pools or servers.",
   "ai:A comma separated list of IP or domain names of the NTP pools or servers. Additional NTP sources are added to all hosts to ensure all hosts clocks are synchronized with a valid NTP server. It may take a few minutes for the new NTP sources to sync.": "A comma-separated list of IP addresses or domain names of the NTP pools or servers. Additional NTP sources are added to all hosts to ensure that all clocks of the hosts are synchronized with a valid NTP server. It might take a few minutes for the new NTP sources to synchronize.",
-  "ai:A pull secret has already been set for this cluster. You can edit it below.": "A pull secret has already been set for this cluster. You can edit it below.",
   "ai:A Red Hat account's pull secret can be found in ": "A Red Hat account pull secret can be found in ",
   "ai:A role will be chosen automatically based on detected hardware and network latency.": "A role will be chosen automatically based on detected hardware and network latency.",
   "ai:Actions": "Actions",
@@ -152,7 +151,6 @@
   "ai:Can not find cluster domain.": "Cannot find cluster domain.",
   "ai:Can not find host of the assisted-image-service route": "Cannot find host of the assisted-image-service route.",
   "ai:Can not manage hosts until Central Infrastructure Management is set up.": "Cannot manage hosts until Central Infrastructure Management is set up.",
-  "ai:Can not query routes.": "Cannot query routes.",
   "ai:Cancel": "Cancel",
   "ai:Cancelled on {{humanizedDataTime}}": "Cancelled on {{humanizedDataTime}}",
   "ai:Cannot be deleted": "Cannot be deleted.",
@@ -168,6 +166,7 @@
   "ai:Check the proxy settings and verify that the assisted installer service is connected to a network. You can use <code>nmcli</code> to get additional information about your network configuration.": "Check the proxy settings and verify that the assisted installer service is connected to a network. You can use <code>nmcli</code> to get additional information about your network configuration.",
   "ai:Check your VM reboot configuration": "Check your VM reboot configuration.",
   "ai:Choose a namespace from your existing host inventory in order to select hosts for your node pools. The namespace will be composed of 1 or more infrastructure environments. After the cluster is created, a host will become a worker node.": "Select a namespace from your existing host inventory in order to select hosts for your node pools. The namespace will contain 1 or more infrastructure environments. After the cluster is created, a host becomes a worker node.",
+  "ai:Cisco ACI": "Cisco ACI",
   "ai:Cisco Intersight URL": "Cisco Intersight URL",
   "ai:Cisco Intersight URL is required": "Cisco Intersight URL is required",
   "ai:Cisco Intersight URL must be a valid URL starting with \"http://\" or \"https://\"": "Cisco Intersight URL must be a valid URL starting with \"http://\" or \"https://\"",
@@ -184,7 +183,6 @@
   "ai:Cluster CIDR": "Cluster CIDR",
   "ai:Cluster configured and ready for installation.": "Cluster configured and ready for installation.",
   "ai:Cluster details": "Cluster details",
-  "ai:Cluster Details": "Cluster Details",
   "ai:cluster doesn't contain the feature_usage field": "cluster does not contain the feature_usage field",
   "ai:cluster doesn't contain the openshift_version field": "cluster does not contain the openshift_version field",
   "ai:Cluster Events": "Cluster Events",
@@ -515,12 +513,14 @@
   "ai:IP Address is outside of selected subnet": "IP Address is outside of selected subnet",
   "ai:IP allocation from the DHCP server timed out.": "IP allocation from the DHCP server timed out.",
   "ai:IP family must match the corresponding machine network family.": "IP family must match the corresponding machine network family.",
+  "ai:IPv4": "IPv4",
   "ai:IPv4 address": "IPv4 address",
   "ai:IPv4 netmask must be between 1-25 and include at least 128 addresses.\nIPv6 netmask must be between 8-128 and include at least 256 addresses.": "IPv4 netmask must be between 1-25 and include at least 128 addresses.\nIPv6 netmask must be between 8-128 and include at least 256 addresses.",
   "ai:IPv6 address": "IPv6 address",
   "ai:iPXE script file is ready to be downloaded": "iPXE script file is ready to be downloaded",
   "ai:iPXE script file URL": "iPXE script file URL",
   "ai:iSCSI NIC belongs to machine CIDR": "iSCSI NIC belongs to machine CIDR",
+  "ai:Isovalent Cilium": "Isovalent Cilium",
   "ai:It can be fixed in the <1>{pageURL.name}</1> page.": "It can be fixed in the <1>{pageURL.name}</1> page.",
   "ai:It can be fixed in the <2></2> step.": "It can be fixed in the <2></2> step.",
   "ai:It is not possible to remove a node from a cluster during installation.": "It is not possible to remove a node from a cluster during installation.",
@@ -565,6 +565,9 @@
   "ai:Machine CIDR conforms expected": "Machine CIDR conforms expected",
   "ai:Machine networks": "Machine networks",
   "ai:Make sure that you expect and recognize the host before approving.": "Make sure that you expect and recognize the host before approving.",
+  "ai:Make sure to upload the required CNI manifests in this step.": "Make sure to upload the required CNI manifests in this step.",
+  "ai:Make sure to upload the required custom and CNI manifests in this step.": "Make sure to upload the required custom and CNI manifests in this step.",
+  "ai:Make sure to upload the required custom manifests in this step.": "Make sure to upload the required custom manifests in this step.",
   "ai:Make sure you download and store your credentials files in a safe place": "Make sure you download and store your credentials files in a safe place",
   "ai:Manage hosts": "Manage hosts",
   "ai:Management": "Management",
@@ -617,7 +620,6 @@
   "ai:Network Management": "Network Management",
   "ai:Network ports": "Network ports",
   "ai:Network type": "Network type",
-  "ai:Network type selection is not supported for SNO clusters or when IPv6 is detected.": "Network type selection is not supported for SNO clusters or when IPv6 is detected.",
   "ai:Networking": "Networking",
   "ai:Networks same address families": "Networks same address families",
   "ai:Never share your downloaded ISO with anyone else.": "Never share your downloaded ISO with anyone else.",
@@ -662,6 +664,7 @@
   "ai:Nodepool name": "Nodepool name",
   "ai:Non overlapping subnets": "Non overlapping subnets",
   "ai:None": "None",
+  "ai:None (Custom CNI)": "None (Custom CNI)",
   "ai:Not a valid IP address": "Not a valid IP address",
   "ai:Not able to access the Web Console?": "Not able to access the Web Console?",
   "ai:Not available": "Not available",
@@ -705,7 +708,6 @@
   "ai:Option 1: Add the following records to your DNS server (recommended)": "Option 1: Add the following records to your DNS server (recommended)",
   "ai:Option 2: Update your local /etc/hosts or /etc/resolv.conf files": "Option 2: Update your local /etc/hosts or /etc/resolv.conf files",
   "ai:Otherwise, the VMs will not be able to reboot during the installation process.": "Otherwise, the VMs will not be able to reboot during the installation process.",
-  "ai:OVN separates the physical network topology from the logical one and is recommended if you're using new or telco features.": "OVN separates the physical network topology from the logical one and is recommended if you are using new or telco features.",
   "ai:Packet loss": "Packet loss",
   "ai:Password": "Password",
   "ai:Paste in 1 or more PEM formatted certificates that you want the cluster to trust.": "Paste in 1 or more PEM formatted certificates that you want the cluster to trust.",
@@ -750,7 +752,6 @@
   "ai:Provisioning": "Provisioning",
   "ai:Proxy settings": "Proxy settings",
   "ai:Pull secret": "Pull secret",
-  "ai:Pull secret configured": "Pull secret configured",
   "ai:Pull secret is a required field.": "Pull secret is a required field.",
   "ai:Pull secrets are used to download OpenShift Container Platform components and connect clusters to a Red Hat account. ": "Pull secrets are used to download OpenShift Container Platform components and connect clusters to a Red Hat account. ",
   "ai:Pull secrets can be found in": "Pull secrets can be found in",
@@ -761,6 +762,7 @@
   "ai:Rebooting while returning to the infrastructure environment": "Rebooting while returning to the infrastructure environment",
   "ai:Received error:": "Received error:",
   "ai:Recommended option. The generated discovery ISO will be smaller, but will need to download additional data during boot. This option is useful if ISO storage capacity is limited or if it's being served over a constrained network.": "Recommended option. The generated discovery ISO will be smaller, but will need to download additional data during boot. This option is useful if ISO storage capacity is limited or if it's being served over a constrained network.",
+  "ai:Red Hat CNI Support Matrix": "Red Hat CNI Support Matrix",
   "ai:Registering": "Registering",
   "ai:Release domain resolution": "Release domain resolution",
   "ai:Remove": "Remove",
@@ -797,6 +799,7 @@
   "ai:Scale down the nodepool or make more hosts available.": "Scale down the nodepool or make more hosts available.",
   "ai:Secondary": "Secondary",
   "ai:Secret and keys": "Secret and keys",
+  "ai:Select a single address family (IPv4 or IPv6) for your machine network.": "Select a single address family (IPv4 or IPv6) for your machine network.",
   "ai:Select all": "Select all",
   "ai:Select an OpenShift version from the list or use the type ahead to narrow down the list.": "Select an OpenShift version from the list or use the type ahead to narrow down the list.",
   "ai:Select config maps from the list or use the type ahead to narrow down the list.": "Select config maps from the list or use the type ahead to narrow down the list.",
@@ -804,6 +807,7 @@
   "ai:Select none": "Select none",
   "ai:Select one or more locations to view hosts": "Select one or more locations to view hosts",
   "ai:Select one or multiple locations to choose the hosts from.": "Select one or multiple locations of the hosts.",
+  "ai:Select this when your hosts are using only IPv4.": "Select this when your hosts are using only IPv4.",
   "ai:selected": "selected",
   "ai:Selected image does not support arm64": "Selected image does not support arm64",
   "ai:Self Node Remediation requirements": "Self Node Remediation requirements",
@@ -823,6 +827,7 @@
   "ai:Single node cluster cannot contain more than 1 host.": "Single node cluster cannot contain more than 1 host.",
   "ai:Single replica": "Single replica",
   "ai:Single replica means components are not expected to be resilient to problems across most fault boundaries associated with high availability. This usually means running critical workloads with just 1 replica and with toleration of full disruption of the component.": "Single replica means components are not expected to be resilient to problems across most fault boundaries associated with high availability. This usually means running critical workloads with just 1 replica and with toleration of full disruption of the component.",
+  "ai:Single stack": "Single stack",
   "ai:Single-Node OpenShift is not supported in this OpenShift version": "Single-Node OpenShift is not supported in this OpenShift version",
   "ai:Size": "Size",
   "ai:SNO: One host is required with at least {{sno_cpu_cores}} CPU cores, {{snoRam}} of RAM, and {{sno_disksize}} GB of disk size storage.": "SNO: One host is required with at least {{sno_cpu_cores}} CPU cores, {{snoRam}} of RAM, and {{sno_disksize}} GB of disk size storage.",
@@ -867,7 +872,6 @@
   "ai:The agent ran successfully": "The agent ran successfully",
   "ai:The block must not overlap with existing physical networks. To access the Pods from an external network, configure load balancers and routers to manage the traffic.": "The block must not overlap with existing physical networks. To access the Pods from an external network, configure load balancers and routers to manage the traffic.",
   "ai:The bond associated with the host will be removed.": "The bond associated with the host will be removed.",
-  "ai:The classic bullet-proof networking type": "The classic bullet-proof networking type",
   "ai:The cluster can not be installed yet because there are no available hosts with {{cpuArchitecture}} architecture found. To continue:": "The cluster cannot be installed because there are no available hosts with {{cpuArchitecture}} architecture found. To continue:",
   "ai:The cluster has 0 hosts. No workloads will be able to run.": "The cluster has 0 hosts. No workloads will be able to run.",
   "ai:The cluster is not ready for installation.": "The cluster is not ready for installation.",
@@ -910,6 +914,8 @@
   "ai:There is still {{count}} pending check_other": "There are still {{count}} pending checks",
   "ai:There may be issues with the boot order": "There might be issues with the boot order",
   "ai:There was an error retrieving data. Check your connection and": "There was an error retrieving data. Check your connection and",
+  "ai:Third-party CNI": "Third-party CNI",
+  "ai:Third-party CNIs require uploading CNI manifests. Please verify you have the required manifests and that the chosen CNI is compatible with your platform and OpenShift version.": "Third-party CNIs require uploading CNI manifests. Please verify you have the required manifests and that the chosen CNI is compatible with your platform and OpenShift version.",
   "ai:This host completed its installation successfully.": "This host completed its installation successfully.",
   "ai:This host does not meet the minimum hardware or networking requirements and can not be included in the cluster.": "This host does not meet the minimum hardware or networking requirements and can not be included in the cluster.",
   "ai:This host does not meet the minimum hardware or networking requirements and will not be included in the cluster.": "This host does not meet the minimum hardware or networking requirements and will not be included in the cluster.",
@@ -937,6 +943,7 @@
   "ai:This subnet range is not available on all hosts": "This subnet range is not available on all hosts",
   "ai:This will determine for the infrastructure environment which kind of hosts would be able to be added. If the hosts that you want to add are using DHCP server, select this option, else, select the static IP.": "This will determine for the infrastructure environment which kind of hosts would be able to be added. If the hosts that you want to add are using DHCP server, select this option. If not, select the static IP.",
   "ai:This will remove all current configurations and will revert to the defaults.": "This will remove all current configurations and will revert to the defaults.",
+  "ai:Tigera Calico": "Tigera Calico",
   "ai:Time": "Time",
   "ai:Time synced between host and service": "Time synced between host and service",
   "ai:to add a number.": "to add a number.",
@@ -981,7 +988,7 @@
   "ai:useAlerts must be used within AlertsContextProvider": "useAlerts must be used within AlertsContextProvider",
   "ai:Used to describe hosts' physical location. Helps for quicker host selection during cluster creation.": "Used to describe hosts' physical location. Helps for quicker host selection during cluster creation.",
   "ai:useFeatureSupportLevel must be used within FeatureSupportLevelContextProvider.": "useFeatureSupportLevel must be used within FeatureSupportLevelContextProvider.",
-  "ai:User-Managed Networking": "User-Managed Networking",
+  "ai:User-Managed networking": "User-Managed networking",
   "ai:Username": "Username",
   "ai:UUID": "UUID",
   "ai:Valid hostname": "Valid hostname",
@@ -1014,7 +1021,7 @@
   "ai:With BMC form": "With BMC form",
   "ai:With Discovery ISO": "With Discovery ISO",
   "ai:With iPXE": "With iPXE",
-  "ai:With User-Managed Networking, you'll need to provide and configure a load balancer for the API and ingress endpoints.": "With User-Managed Networking, you'll need to provide and configure a load balancer for the API and ingress endpoints.",
+  "ai:With User-Managed networking, you'll need to provide and configure a load balancer for the API and ingress endpoints.": "With User-Managed networking, you'll need to provide and configure a load balancer for the API and ingress endpoints.",
   "ai:Worker_one": "Worker",
   "ai:Worker_other": "Workers",
   "ai:Worker Hosts Labels": "Worker Hosts Labels",
@@ -1029,6 +1036,9 @@
   "ai:You have opted out of formatting bootable disks on some hosts. To ensure the hosts reboot into the expected installation disk, manual user intervention may be required during OpenShift installation.": "You have opted out of formatting bootable disks on some hosts. To ensure the hosts reboot into the expected installation disk, manual user intervention might be required during OpenShift installation.",
   "ai:You should use your cluster's Kubeconfig file to gain access to the cluster.": "You should use your cluster's Kubeconfig file to gain access to the cluster.",
   "ai:You'll first need to have a storage operator in order to create the storage class. If you don't have one installed, we recommend OpenShift Data Foundation operator, but you may use any.": "You need a storage operator installed, such as OpenShift Data Foundation, to create the storage class.",
+  "ai:You're using a third-party CNI": "You're using a third-party CNI",
+  "ai:You're using an external platform": "You're using an external platform",
+  "ai:You're using an external platform and a third-party CNI": "You're using an external platform and a third-party CNI",
   "ai:Your libvirt virtual machines should be configured to restart automatically after a reboot. You can check this by running:": "Your libvirt virtual machines should be configured to restart automatically after a reboot. You can check this by running:",
   "ai:Your own NTP (Network Time Protocol) sources": "Your own NTP (Network Time Protocol) sources"
 }

package/package.json

@@ -59,5 +59,5 @@
     "lint": "yarn run -T eslint --cache --cache-location node_modules/.cache/eslint/.eslint-cache ."
   },
   "type": "module",
-  "version": "2.52.1"
+  "version": "5.0.0-cim"
 }