@openshift-assisted/locales 2.15.2-cim → 2.16.0-cim

package/lib/en/translation.json

@@ -11,6 +11,8 @@
   "ai:{{count}} control plane node installed_plural": "{{count}} control plane nodes installed",
   "ai:{{count}} Disk": "{{count}} Disk",
   "ai:{{count}} Disk_plural": "{{count}} Disks",
+  "ai:{{count}} entry": "{{count}} entry",
+  "ai:{{count}} entry_plural": "{{count}} entries",
   "ai:{{count}} filter applied": "{{count}} filter applied",
   "ai:{{count}} filter applied_plural": "{{count}} filters applied",
   "ai:{{count}} filtering label": "{{count}} filtering label",
@@ -50,6 +52,7 @@
   "ai:Add": "Add",
   "ai:Add another Tang server": "Add another Tang server",
   "ai:Add BMC host dialog": "Add BMC host dialog",
+  "ai:Add custom manifests": "Add custom manifests",
   "ai:Add host": "Add host",
   "ai:Add host dialog": "Add host dialog",
   "ai:Add host using Baseboard Management Controller (BMC)": "Add host using Baseboard Management Controller (BMC)",
@@ -82,9 +85,10 @@
   "ai:Already approved": "Already approved",
   "ai:Also note that each host's disk write speed should meet the minimum requirements to run OpenShift. ": "Also note that the disk write speed of each host must meet the minimum requirements to run OpenShift. ",
   "ai:AMD GPU requirements": "AMD GPU requirements",
-  "ai:An error occured": "An error occured.",
-  "ai:An error occured while approving agents": "An error occured while approving agents.",
-  "ai:An error occured while starting installation.": "An error occured while starting installation.",
+  "ai:An error occurred": "An error occurred.",
+  "ai:An error occurred while approving agents": "An error occurred while approving agents.",
+  "ai:An error occurred while fetching config maps": "An error occurred while fetching config maps",
+  "ai:An error occurred while starting installation.": "An error occurred while starting installation.",
   "ai:And verify that this is the output:": "And verify the following output:",
   "ai:API connectivity failure": "API connectivity failure",
   "ai:API domain name resolution": "API domain name resolution",
@@ -100,10 +104,12 @@
   "ai:Approve host to join infrastructure environment": "Approve host to join infrastructure environment",
   "ai:Approve hosts dialog": "Approve hosts dialog",
   "ai:Approve hosts to join infrastructure environment": "Approve hosts to join infrastructure environment",
+  "ai:Arbiter": "Arbiter",
   "ai:Are you sure you want to reset the cluster?": "Are you sure you want to reset the cluster?",
   "ai:arm64": "arm64",
   "ai:arm64 is not supported in this OpenShift version": "arm64 is not supported in this OpenShift version",
   "ai:At least 3 hosts are required, capable of functioning as control plane nodes.": "At least 3 hosts are required that are capable of functioning as control plane nodes.",
+  "ai:At least one config map is required": "At least one config map is required",
   "ai:Authentication is provided by the discovery ISO, therefore when you access your host using SSH, a password is not required. Optional -i parameter can be used to specify the private key that matches the public key provided when generating Discovery ISO.": "Authentication is provided by the Discovery ISO, so a password is not required when you access your host using SSH. The optional -i parameter can be used to specify the private key that matches the public key that is provided when generating Discovery ISO.",
   "ai:Auto synchronized NTP (Network Time Protocol) sources": "Auto synchronized NTP (Network Time Protocol) sources",
   "ai:Auto-assign": "Auto-assign",
@@ -179,6 +185,7 @@
   "ai:Cluster network host prefix": "Cluster network host prefix",
   "ai:Cluster networks": "Cluster networks",
   "ai:Cluster nodepools": "Cluster nodepools",
+  "ai:Cluster Observability requirements": "Cluster Observability requirements",
   "ai:Cluster popover": "Cluster popover",
   "ai:Cluster summary": "Cluster summary",
   "ai:Cluster validations": "Cluster validations",
@@ -190,6 +197,9 @@
   "ai:Command to download the ISO:": "Command to download the ISO:",
   "ai:Compatible with cluster platform": "Compatible with cluster platform",
   "ai:Condition": "Condition",
+  "ai:Config map name is required": "Config map name is required",
+  "ai:Config map not found": "Config map not found",
+  "ai:Config maps": "Config maps",
   "ai:Configuration is hanging for a long time.": "Configuration is hanging for a long time.",
   "ai:Configuration may take a few minutes.": "Configuration might take a few minutes.",
   "ai:Configure": "Configure",
@@ -202,7 +212,6 @@
   "ai:Configure your own NTP sources to sychronize the time between the hosts that will be added to this infrastructure environment.": "Configure your own NTP sources to sychronize the time between the hosts that will be added to this infrastructure environment.",
   "ai:Configure your own NTP sources to synchronize the time between the hosts that will be added to this infrastructure environment.": "Configure your own NTP sources to synchronize the time between the hosts that will be added to this infrastructure environment.",
   "ai:Configuring the host inventory settings will enable the Central Infrastructure Management.": "Configuring the host inventory settings will enable the Central Infrastructure Management.",
-  "ai:Confirm the Single Node OpenShift disclaimer to continue.": "Confirm the Single Node OpenShift disclaimer to continue.",
   "ai:Connected": "Connected",
   "ai:Container images availability": "Container images availability",
   "ai:Continue cluster configuration": "Continue cluster configuration",
@@ -233,8 +242,12 @@
   "ai:Create": "Create",
   "ai:Created at": "Created at",
   "ai:Currently, adding additional machines to your cluster is not supported.": "Currently, adding additional machines to your cluster is not supported.",
+  "ai:Custom manifests": "Custom manifests",
+  "ai:Data": "Data",
   "ai:Database storage": "Database storage",
   "ai:Default route to host": "Default route to host",
+  "ai:Define a config map": "Define a config map",
+  "ai:Define a config map with your custom manifests and select it in the form below.": "Define a config map with your custom manifests and select it in the form below.",
   "ai:Define the quantity of worker nodes and nodepools to create for your cluster. Additional worker nodes and nodepools can be added after the cluster is created.": "Define the quantity of worker nodes and nodepools to create for your cluster. Additional worker nodes and nodepools can be added after the cluster is created.",
   "ai:Deleted hosts": "Deleted hosts",
   "ai:Deprovisioning": "Deprovisioning",
@@ -286,6 +299,7 @@
   "ai:Edit BMH": "Edit BMH",
   "ai:Edit BMH dialog": "Edit BMH dialog",
   "ai:Edit cluster-wide proxy settings": "Edit cluster-wide proxy settings",
+  "ai:Edit config map data": "Edit config map data",
   "ai:Edit ISO configuration": "Edit ISO configuration",
   "ai:Edit NTP sources": "Edit NTP sources",
   "ai:Edit Ntp sources dialog": "Edit NTP sources dialog",
@@ -315,6 +329,8 @@
   "ai:Exclude destination domain names, IP addresses, or other network CIDRs from proxying by adding them to this comma-separated list.": "Exclude destination domain names, IP addresses, or other network CIDRs from proxying by adding them to this comma-separated list.",
   "ai:Exposes the service externally using a cloud provider's load balancer": "Exposes the service externally using a cloud provider's load balancer",
   "ai:Exposes the service on each node's IP at a static port": "Exposes the service on each node's IP at a static port",
+  "ai:External cloud provider": "External cloud provider",
+  "ai:External partner platform": "External partner platform",
   "ai:Externally provisioned": "Externally provisioned",
   "ai:Failed": "Failed",
   "ai:Failed on {{humanizedDataTime}}": "Failed on {{humanizedDataTime}}",
@@ -370,6 +386,7 @@
   "ai:Host address": "Host address",
   "ai:Host cannot be deleted while host is either installed or being installed.": "Host cannot be deleted while host is either installed or being installed.",
   "ai:Host Count": "Host Count",
+  "ai:Host count exceeds the current number of available hosts.": "Host count exceeds the current number of available hosts.",
   "ai:Host details": "Host details",
   "ai:Host has already been booted from disk during the previous installation. To finish resetting the installation, boot the host into the discovery image": "Host has already been booted from disk during the previous installation. To finish resetting the installation, boot the host into the discovery image",
   "ai:Host inventory": "Host inventory",
@@ -413,7 +430,7 @@
   "ai:HTTPS proxy URL": "HTTPS proxy URL",
   "ai:HTTPS Proxy URL": "HTTPS Proxy URL",
   "ai:I understand that I need to download credentials files prior of proceeding with the cluster installation.": "I understand that I need to download credentials files prior of proceeding with the cluster installation.",
-  "ai:I understand, accept, and agree to the limitations associated with using Single Node OpenShift.": "I understand, accept, and agree to the limitations associated with using Single Node OpenShift.",
+  "ai:I'm installing on a disconnected/air-gapped/secured environment": "I'm installing on a disconnected/air-gapped/secured environment",
   "ai:If hosts are behind a firewall that requires the use of a proxy, provide additional information about the proxy.": "If hosts are behind a firewall that requires the use of a proxy, provide additional information about the proxy.",
   "ai:If not, please start your VMs with the following configuration:": "If not, start your VMs with the following configuration:",
   "ai:If the cluster hosts are in a network with a re-encrypting (MITM) proxy or the cluster needs to trust certificates for other purposes (e.g. container image registries).": "If the cluster hosts are in a network with a re-encrypting (MITM) proxy or the cluster needs to trust certificates for other purposes (e.g. container image registries).",
@@ -441,7 +458,6 @@
   "ai:Inside the example script file, customize the asset URLs to your local server address": "Inside the example script file, customize the asset URLs to your local server address",
   "ai:Inspecting": "Inspecting",
   "ai:Install cluster": "Install cluster",
-  "ai:Install single node OpenShift (SNO)": "Install single node OpenShift (SNO)",
   "ai:Install storage operator": "Install storage operator",
   "ai:Installation cancelled": "Installation cancelled",
   "ai:Installation disk": "Installation disk",
@@ -459,6 +475,7 @@
   "ai:Installing {{operatorsCountString}}": "Installing {{operatorsCountString}}",
   "ai:Installing SNO will result in an OpenShift deployment that is not highly available.": "Installing SNO will result in an OpenShift deployment that is not highly available.",
   "ai:Insufficient": "Insufficient",
+  "ai:Integrate with external partner platforms": "Integrate with external partner platforms",
   "ai:IP address block from which Pod IPs are allocated This block must not overlap with existing physical networks. These IP addresses are used for the Pod network, and if you need to access the Pods from an external network, configure load balancers and routers to manage the traffic.": "IP address block from which Pod IPs are allocated. This block must not overlap with existing physical networks. These IP addresses are used for the Pod network, and if you need to access the Pods from an external network, configure load balancers and routers to manage the traffic.",
   "ai:IP allocation from the DHCP server timed out.": "IP allocation from the DHCP server timed out.",
   "ai:IPv4 address": "IPv4 address",
@@ -513,6 +530,7 @@
   "ai:Make sure you download and store your credentials files in a safe place": "Make sure you download and store your credentials files in a safe place",
   "ai:Manage hosts": "Manage hosts",
   "ai:Management": "Management",
+  "ai:Manifest names in each config map should be unique across all referenced config maps.": "Manifest names in each config map should be unique across all referenced config maps.",
   "ai:Manually fix the host's NTP configuration or provide additional NTP sources.": "Manually fix the host's NTP configuration or provide additional NTP sources.",
   "ai:Manufacturer": "Manufacturer",
   "ai:Maximum availability {{maxAgents}}": "Maximum availability {{maxAgents}}",
@@ -525,6 +543,7 @@
   "ai:Memory capacity": "Memory capacity",
   "ai:Message": "Message",
   "ai:Metal3 operator is not configured": "Metal3 operator is not configured",
+  "ai:MetalLB requirements": "MetalLB requirements",
   "ai:Migration toolkit for virtualization requirements": "Migration toolkit for virtualization requirements",
   "ai:Minimal image file": "Minimal image file",
   "ai:Minimal value is 10Gi": "Minimal value is 10Gi",
@@ -582,10 +601,12 @@
   "ai:No OpenShift images available for selected CPU architecture {{cpuArchitecture}}.": "No OpenShift images available for selected CPU architecture {{cpuArchitecture}}.",
   "ai:No options available": "No options available",
   "ai:No overlapping CIDR": "No overlapping CIDR",
+  "ai:No platform integration": "No platform integration",
   "ai:No proxy": "No proxy",
   "ai:No proxy domains": "No proxy domains",
   "ai:No release image is available.": "No release image is available.",
   "ai:No results found": "No results found",
+  "ai:No results found for {{filter}}": "No results found for {{filter}}",
   "ai:No results match the filter criteria. Clear filters to show results.": "No results match the filter criteria. Clear filters to show results.",
   "ai:No skip installation disk": "No skip installation disk",
   "ai:No skip missing disk": "No skip missing disk",
@@ -611,10 +632,13 @@
   "ai:NTP status": "NTP status",
   "ai:NTP synchronization": "NTP synchronization",
   "ai:NTP synchronization failure": "NTP synchronization failure",
+  "ai:NUMA Resources requirements": "NUMA Resources requirements",
   "ai:Number of characters between dots (.) must be 1-63": "Number of characters between dots (.) must be 1-63",
   "ai:Number of control plane nodes": "Number of control plane nodes",
   "ai:Number of hosts": "Number of hosts",
+  "ai:Nutanix": "Nutanix",
   "ai:NVIDIA GPU requirements": "NVIDIA GPU requirements",
+  "ai:OADP requirements": "OADP requirements",
   "ai:OCS requirements": "OCS requirements",
   "ai:ODF requirements": "ODF requirements",
   "ai:OLM catalog components will be deployed onto the guest cluster.": "OLM catalog components will be deployed onto the guest cluster.",
@@ -630,7 +654,6 @@
   "ai:OpenShift": "OpenShift",
   "ai:OpenShift AI requirements": "OpenShift AI requirements",
   "ai:OpenShift Cluster Manager": "OpenShift Cluster Manager",
-  "ai:OpenShift in-place upgrades aren't expected to work with SNO. If an upgrade is needed, your system will need a redeployment.": "OpenShift in-place upgrades are not expected to work with SNO. If an upgrade is needed, your system to be redeployed.",
   "ai:OpenShift sandboxed containers requirements": "OpenShift sandboxed containers requirements",
   "ai:OpenShift version": "OpenShift version",
   "ai:OpenShift Web Console troubleshooting": "OpenShift Web Console troubleshooting",
@@ -663,6 +686,7 @@
   "ai:Preparing for installation": "Preparing for installation",
   "ai:Preparing step failed": "Preparing step failed",
   "ai:Preparing step successful": "Preparing step successful",
+  "ai:Prevents split-brain scenarios and maintains quorum.": "Prevents split-brain scenarios and maintains quorum.",
   "ai:Preview": "Preview",
   "ai:Product": "Product",
   "ai:Progress": "Progress",
@@ -706,6 +730,7 @@
   "ai:Report a bug": "Report a bug",
   "ai:Required field": "Required field",
   "ai:Required.": "Required.",
+  "ai:Requirements for Two Node control plane OpenShift": "Requirements for Two Node control plane OpenShift",
   "ai:Reset": "Reset",
   "ai:Reset cluster": "Reset cluster",
   "ai:Reset host": "Reset host",
@@ -719,11 +744,13 @@
   "ai:Runs the control plane components of OpenShift, including the API server.": "Runs the control plane components of OpenShift, including the API server.",
   "ai:Save": "Save",
   "ai:Saving changes...": "Saving changes...",
+  "ai:Scale down the nodepool or make more hosts available.": "Scale down the nodepool or make more hosts available.",
   "ai:Secret and keys": "Secret and keys",
   "ai:Select all": "Select all",
+  "ai:Select an OpenShift version from the list or use the type ahead to narrow down the list.": "Select an OpenShift version from the list or use the type ahead to narrow down the list.",
+  "ai:Select config maps from the list or use the type ahead to narrow down the list.": "Select config maps from the list or use the type ahead to narrow down the list.",
   "ai:Select how you'd like to add hosts (Discovery ISO, iPXE, or BMC form) and follow the instructions that appear.": "Select the method of adding hosts (Discovery ISO, iPXE, or BMC form) and follow the instructions.",
   "ai:Select none": "Select none",
-  "ai:Select one or more hosts": "Select one or more hosts",
   "ai:Select one or more locations to view hosts": "Select one or more locations to view hosts",
   "ai:Select one or multiple locations to choose the hosts from.": "Select one or multiple locations of the hosts.",
   "ai:selected": "selected",
@@ -741,15 +768,13 @@
   "ai:Show all available versions": "Show all available versions",
   "ai:Show proxy settings": "Show proxy settings",
   "ai:Single node cluster cannot contain more than 1 host.": "Single node cluster cannot contain more than 1 host.",
-  "ai:Single Node OpenShift disclaimer": "Single Node OpenShift disclaimer",
   "ai:Single replica": "Single replica",
   "ai:Single replica means components are not expected to be resilient to problems across most fault boundaries associated with high availability. This usually means running critical workloads with just 1 replica and with toleration of full disruption of the component.": "Single replica means components are not expected to be resilient to problems across most fault boundaries associated with high availability. This usually means running critical workloads with just 1 replica and with toleration of full disruption of the component.",
   "ai:Single-Node OpenShift is not supported in this OpenShift version": "Single-Node OpenShift is not supported in this OpenShift version",
   "ai:Size": "Size",
-  "ai:SNO enables you to install OpenShift using only one host.": "SNO enables you to install OpenShift using only one host.",
-  "ai:SNO is in a proof-of-concept stage and is not supported in any way.": "SNO is in a proof-of-concept stage and is not supported.",
   "ai:SNO: One host is required with at least {{sno_cpu_cores}} CPU cores, {{snoRam}} of RAM, and {{sno_disksize}} GB of disk size storage.": "SNO: One host is required with at least {{sno_cpu_cores}} CPU cores, {{snoRam}} of RAM, and {{sno_disksize}} GB of disk size storage.",
   "ai:Software-Defined Networking (SDN)": "Software-Defined Networking (SDN)",
+  "ai:Some config map items are invalid": "Some config map items are invalid",
   "ai:Some details are not editable after the draft cluster was created.": "Some details are not editable after the draft cluster was created.",
   "ai:Some hosts are in a warning state.": "Some hosts are in a warning state.",
   "ai:Some hosts are in an error state.": "Some hosts are in an error state.",
@@ -867,6 +892,7 @@
   "ai:Troubleshoot in the assisted service deployment": "Troubleshoot in the assisted service deployment",
   "ai:try again": "try again",
   "ai:Try logging into the machine directly through physical access, out-of-band management, or a virtual machine console. To generate a new bootable image file with password-based login enabled, download the full image file and patch it locally with a login password of your choice using": "Try logging into the machine directly through physical access, out-of-band management, or a virtual machine console. To generate a new bootable image file with password-based login enabled, download the full image file and patch it locally with a login password of your choice using",
+  "ai:Two nodes control plane OpenShift must include an additional arbiter node.": "Two nodes control plane OpenShift must include an additional arbiter node.",
   "ai:Type or select location(s)": "Type or select location(s)",
   "ai:Unable to SSH into your hosts through the network?": "Unable to SSH into your hosts through the network?",
   "ai:Unique hostname": "Unique hostname",
@@ -908,6 +934,7 @@
   "ai:View host events": "View host events",
   "ai:VIP IP allocation from DHCP server has been timed out": "VIP IP allocation from DHCP server has timed out",
   "ai:Virtual machine": "Virtual machine",
+  "ai:vSphere": "vSphere",
   "ai:Vsphere disk uuid enabled": "Vsphere disk uuid enabled",
   "ai:Waiting for host...": "Waiting for host...",
   "ai:Waiting for host..._plural": "Waiting for hosts...",
@@ -934,5 +961,6 @@
   "ai:You should use your cluster's Kubeconfig file to gain access to the cluster.": "You should use your cluster's Kubeconfig file to gain access to the cluster.",
   "ai:You'll first need to have a storage operator in order to create the storage class. If you don't have one installed, we recommend OpenShift Data Foundation operator, but you may use any.": "You need a storage operator installed, such as OpenShift Data Foundation, to create the storage class.",
   "ai:Your libvirt virtual machines should be configured to restart automatically after a reboot. You can check this by running:": "Your libvirt virtual machines should be configured to restart automatically after a reboot. You can check this by running:",
-  "ai:Your own NTP (Network Time Protocol) sources": "Your own NTP (Network Time Protocol) sources"
+  "ai:Your own NTP (Network Time Protocol) sources": "Your own NTP (Network Time Protocol) sources",
+  "ai:Arbiter_plural": "Arbiter"
 }

package/package.json

@@ -59,5 +59,5 @@
     "lint": "yarn run -T eslint --cache --cache-location node_modules/.cache/eslint/.eslint-cache ."
   },
   "type": "module",
-  "version": "2.15.2-cim"
+  "version": "2.16.0-cim"
 }