@openrig/cli 0.6.8 → 0.6.10

package/daemon/docs/reference/whats-new.md

@@ -1,96 +1,167 @@
-# What changed in OpenRig 0.6.8
+# What changed in OpenRig 0.6.10
 
-This note is for an agent on an install that was just upgraded to 0.6.8. It lists only what behaves differently from
-0.6.7 and what to do about it. For everything OpenRig can do, read the capability map:
+This note is for an agent on an install that was just upgraded to 0.6.10. It lists only what behaves differently from
+0.6.9 and what to do about it. For everything OpenRig can do, read the capability map:
 `rig context get onboarding-width/public-what-you-can-do.md`. Each release replaces this file, so
 `rig context get reference/whats-new.md` describes the installed version once the upgraded daemon is running. Without
 a running daemon, read `$OPENRIG_HOME/reference/whats-new.md`. The daemon refreshes that copy when it starts, so right
 after an upgrade it can still hold the previous version's note.
 
-## Skills from the managed catalog
-
-- **A skill with uncommitted changes in the catalog now blocks only itself.** Before, one edited skill made the whole
-  catalog unavailable to work-install, launch and restore preflight. Now that skill is skipped and named, and the
-  remaining clean skills stay available for projection.
-- **Read the warning, don't retry.** `catalog_skill_skipped` names a skill nobody selected; `selected_skill_skipped`
-  names the selector and the folder. The fix is to commit or restore that folder's content in the catalog, then run the
-  projection again.
-- **A selected skipped skill makes the inspection commands exit 1.** `rig context work-install --runtime <runtime>`
-  and `rig skill loadout --runtime <runtime>` inspect by default. Use `--apply-skills` with work-install or `--apply`
-  with skill loadout to project the remaining clean skills. Read the warnings and projection result; exit 1 alone does
-  not say whether files were changed. With `--json`, skipped skills are in `skillLoadout.skipped` or
-  `loadout.skipped`, respectively.
-- **A seat keeps the copy it already has** of a skipped skill, unchanged. After the catalog change is committed or
-  restored, the next applied projection can refresh it. No seat receives the skipped skill's uncommitted files, and
-  launch only warns about the skip.
-- **An uncommitted `catalog.yaml` still makes the whole catalog unavailable,** because it changes every selection.
-
-## Launch plans
-
-- **`rig launch <rig> <seat> --plan` previews one seat's launch** without launching it, locally or with `--host`. Use
-  it before starting a single seat, as `--seats … --plan` already allowed for several.
-- **A plan is never sent to a daemon older than 0.5.9,** which would ignore the flag and launch. If `rig launch --plan`
-  refuses for that reason, restart or upgrade that daemon. If it exits non-zero saying the daemon may have acted, check
-  `rig ps --nodes -A` before retrying.
+## After the upgrade
+
+- **Restart the daemon** (`rig daemon stop`, then `rig daemon start`). Two migrations run on the first start: `099`
+  adds one partial index to the queue table, and `101` adds four empty columns to `sessions`. Neither changes existing
+  data. There is no migration `100`. The bundled openrig-core plugin goes from 0.1.8 to 0.1.9.
+
+## Output that changed shape
+
+- **`rig capture --lines N` is the last N lines,** after blank rows at the bottom are dropped. When earlier lines are
+  cut, stderr says `[rig capture: <session>: N earlier lines not shown; last M shown]`. In `--json`, `lines` is then
+  the count returned, and `requestedLines` and `omittedLines` are new (per seat under `--rig` or `--pod`). For the old
+  output, N history lines plus the whole pane, add `--history-plus-pane`; it keeps the old JSON too, without
+  `requestedLines` or `omittedLines`. Without `--lines`, or with a non-numeric or zero `--lines`, nothing changed. A
+  short capture doesn't prove a seat is idle.
+- **Compact `rig queue list` rows carry `summary`,** and so do `overdue` and `undelivered`. The fields they leave out
+  (`body`, `evidenceRef`, `humanDetail`, `waiting`, `chainOfRecord`, `replyTo`, `humanQuestions`, `humanAnswers`) are
+  now absent, not `null` or `""`, and `fieldsElided` names them. A filter that tested those fields for null must test
+  for presence. Read a full row with `rig queue show <id> --full --json`.
+- **`lastNudgeResult` reads `claimed`** on a claimed row whose wake was recorded as `delivered-ack-pending` or
+  `indeterminate:…`. The recorded value is unchanged and shows in the new `lastNudgeWireResult`; unclaiming brings it
+  back. `claimed` is never promoted to `verified`.
+- **`rig chatroom history` returns the newest messages** when you give neither `--after` nor `--since`, still listed
+  oldest first. Before, a room longer than the limit returned its oldest messages. `--after` and `--since` still page
+  forward from that point, and `rig chatroom wait` is unchanged.
+
+## Seats and restore
+
+- **`rig launch <rigId> <seat>` no longer calls an exited agent running.** When a seat's kept pane is at an idle shell,
+  the launch returns `attention_required` (HTTP 409, exit 1) with `Session alive, agent not running for '<seat>'` and
+  the ways back: resume it with `--snapshot-id <id>` when a snapshot can, `rig seat launch <session> --fresh --stop`, or
+  restart the agent in the pane. The pane and its history are kept. This covers Claude Code, Codex, Pi and OMP seats.
+- **`rig up <rig> --existing` puts back the guidance `rig down` removed.** Before a resumed seat starts, the missing
+  OpenRig managed blocks go back into the rig's Claude file (`CLAUDE.md`, or `CLAUDE.local.md`) or `AGENTS.md` for
+  Codex. Existing blocks and the person's own text are untouched, and nothing is sent to the conversation. The
+  warnings say `Restore guidance: <seat>: put back missing blocks …`. A seat still missing a block keeps running, its
+  node lists `guidanceGaps`, the rig reads `partially_restored` instead of `fully_restored`, and `rig up` exits 1.
+- **A resumed Claude seat whose session ID changed can prove.** When Claude continues `--resume T1` under a new ID T2,
+  and the first SessionStart hook from the process OpenRig launched reports `source: "resume"`, OpenRig records T2. The
+  seat restores as `resumed`, `rig seat clear-attention` can clear it, and sends stop warning that the launch identity
+  differs. Resume commands now start with `OPENRIG_RESUME_LAUNCH='<T1>'`. It needs openrig-core 0.1.9; `/clear`, an
+  in-process `/resume`, or a hand-started process still keep the refusal.
+- **A restore no longer proves a seat from a launcher's token** when the launcher isn't Claude and the Claude it
+  started names a different conversation. That seat reads `mismatch` and the restore returns `attention_required`.
+- **A seat whose tmux session is confirmed gone reads `detached`,** with activity `unknown` and reason
+  `session_missing`. `rig ps --nodes` shows `tmux session missing; restore or relaunch the seat`, `rig seat status`
+  prints a `Reason:` line, and `--full --json` adds `storedSessionStatus`. The stored status isn't rewritten.
+- **A Codex seat at its usage limit reads `unknown` with reason `usage_limit`,** not idle, when its screen ends with
+  the `■ You've hit your usage limit` banner. For a seat bound to a known Codex account, `rig provider signals` can show
+  a provider-event signal for that account that allows a switch decision.
+- **`rig add <rig> …` takes the rig's name as well as its ID.** A name two active rigs share is refused with
+  `rig_ambiguous` and the candidates. `rig launch` still takes an ID only.
+- **`rig start` says why it skipped an existing kernel:** `Kernel auto-boot skipped (kernel rig already managed).` and,
+  if its seats aren't running, `rig up kernel --existing`.
+
+## Sends and wakes
+
+- **Codex seats behind a launcher receive sends.** When a seat's `codex` is a launcher that starts Codex as a child,
+  `rig send` and queue wakes used to refuse with "reports sh as the foreground command". The deepest `codex` on one
+  process chain now counts as the seat. Codex processes on separate branches, or naming different conversations, are
+  still refused.
+- **Claude's faint suggested prompt isn't a person's draft.** A send to an idle Claude seat whose empty input box shows
+  only that suggestion is no longer refused as `prompt_draft`. OpenRig takes one styled capture to tell; real typed or
+  pasted text is still refused, and a suggestion that wraps onto a second row still reads as a draft.
+- **`rig queue create --verify` reports a seat's wake and claim.** For an agent destination it returns as soon as a
+  wake result or a claim is recorded, bounded at 30 seconds, with `receiptSource: "terminal"`, `outcome`, `wakeResult`
+  and `claim {observed, claimedAt, pickup}`. An unconfirmed receipt is not a failed handoff. See the known gap below
+  for a row the seat already claimed.
+- **Keep agent-to-agent escalations off the person's Slack (off by default).** `rig config set queue.wake_human_rung
+  explicit-only` (or `OPENRIG_QUEUE_WAKE_HUMAN_RUNG`) stops the wake ladder's last step at `rig view show escalations`
+  unless the row is addressed to a person: an `@external` address or a registered human. A seat stuck at a prompt only
+  a person can clear still reaches one, and an unreadable human registry posts everything. The default, `always`,
+  changes nothing.
 
 ## Slack
 
-- **Answer a person's thread reply in that thread.** When someone replies inside a thread OpenRig opened, answer with
-  `rig queue create --human-intent update --reply-to <the inbound reply's row>`, and the answer posts in that thread.
-  A top-level message is still answered top-level.
-- **A short rate limit is waited out.** When Slack asks for a pause of 10 seconds or less, OpenRig waits and retries the
-  post once. A longer pause is still left to the usual retry of retained messages.
-
-## Managed compaction
-
-- **A quiet seat is restored after `/compact`.** The turn boundary, the restore request and the read-depth
-  audit now reach a Claude seat that takes no turn after compacting. Before, they waited for the seat's next turn,
-  so a seat with nothing to do could sit unrestored. Each stage still waits until the seat's screen shows it idle.
-
-## Workflows
-
-- **Validate before you run.** `rig workflow validate` reports `step_cannot_finish` when no allowed exit can finish a
-  step or route onward, and such a workflow cannot be instantiated. Allow `done` or an exit with a route onward. In a
-  dependency graph, `handoff` can also finish a sink without a next step. A spec that validated on 0.6.7 may need a
-  correction.
-
-## The TUI
-
-- **Type whole commands on an empty command line.** The footer toggle is now `F`, and in a selected Scopes view the
-  mini-requirements and narrative keys are `M` and `N`, so `find`, `feed`, `mission`, `narrative` and `needs` reach the
-  command line intact.
-- **`j` and `k` move the selection down and up** when the command line is empty. With text on the line they're ordinary
-  letters.
-
-## Smaller changes
-
-- **A Claude seat launched with `--remote-control`** confirms its identity instead of staying "identity not confirmed".
-- **`rig down` still saves its recovery snapshot** when finding one seat's resume details fails.
-- **A wake for a handed-off task shows its summary** on one line, so read it to see what the task is for.
-- **`rig scope audit` accepts slice folders numbered 100 and above.** `rig proof add --file` keeps a leading UTF-8
-  byte-order mark.
-- **Building from source no longer needs POSIX shell tools** for the CLI and TUI output. It hasn't been run on Windows
-  yet; WSL2 is still the way to run OpenRig there.
-- **A topology naming reference** explains how to name a team's pods and seats: `rig context get
-  reference/topology-naming.md`.
+- **A decision click that isn't recorded gets one reply in the thread** saying why: the clicker isn't registered, the
+  decision was sent to someone else or is no longer waiting, the button no longer matches, or OpenRig can't find the
+  decision. Where it helps, the reply asks for an answer in words. A recorded click still gets its usual reply, and a
+  redelivered click gets no second one. It's best effort and needs the bot token. A successful press doesn't exercise
+  these replies.
+
+## Terminals and attach
+
+- **Attach commands name the daemon's tmux server.** When the daemon was started inside tmux on a non-default socket,
+  every attach command OpenRig prints carries `-L <name>` or `-S <path>`, including `tmuxAttachCommand` in `rig ps
+  --json`. From inside tmux, run it as `env -u TMUX <tmuxAttachCommand>`. On the default server nothing changed.
+- **When a caller of the daemon's terminal API names no provider, the daemon uses cmux if Herdr isn't available** and
+  cmux is, and says so. A named `--provider` is used as named. `rig terminal open` without `--provider`, and the TUI's
+  "Open terminals", open Herdr, or plain tmux when Herdr is missing, never cmux. The TUI's preview now asks for the
+  same provider as the window it opens, so it isn't refused when cmux is running.
+- **A tmux started inside a Herdr pane is recognised** by Herdr's markers (`HERDR_ENV`, `HERDR_PANE_ID`,
+  `HERDR_SOCKET_PATH`), so `rig terminal open --window` opens in that Herdr.
+
+## Setup
+
+- **`rig setup --providers claude|codex|both`** (or a comma list) sets which harnesses it installs and checks. One not
+  chosen reads `skipped` with `Not selected: …`, never failed. Without the flag, setup is unchanged. `rig doctor` still
+  checks both.
+- **A first `rig daemon start` after a timed-out probe goes ahead when the port is free,** as on WSL2. A port that's
+  really held is refused with `Address already in use (EADDRINUSE)` and the `--port` advice.
+
+## Teams
+
+- **Starter and factory teams run their own first steps and checks without stopping for approval** where they can:
+  plain `rig` commands, the file tool instead of a heredoc, the project's test command first. Their leads read the goal
+  from `rig queue show <id> --full`.
+- **The operator says what a team launch changes in the person's folder before asking** (`CLAUDE.md`, skills,
+  `.mcp.json`, `.openrig/`, and an accept-edits `.claude/settings.local.json`), and offers a separate copy such as a git
+  worktree. When a seat shows `needs_input`, the operator or lead tells the person which seat, what it asks, and its
+  attach command.
+
+## Smaller fixes
+
+- `_` and `%` in a `rig view show <lens> --rig <name>` rig name are no longer wildcards, in all seven lenses that
+  filter by rig.
+- `rig ask` matches chat keywords such as `config.json` or `C++` literally.
+- `rig heartbeat` reads CRLF queue files and reads a zone-less proof timestamp as UTC when picking the latest.
+- `rig usage top` reads every sample in its window; `rig usage top|series --json` prints the daemon's error as JSON.
+- A `?limit=` that isn't a number returns 400, not 500.
+- `rig workflow instantiate` and `project` print the instance and packet the daemon returned.
+- `rig transcript --tail` keeps a line ending in `%` and drops a repeated prompt.
+- `--json` after `--` no longer turns an error into JSON; `rig env` prints the daemon's error.
+- A file read over 1 MiB ends at a whole UTF-8 character, and `truncatedAtBytes` says where.
+- The TUI counts CR+LF as one Enter, keeps an emoji whole at a wrap, pages Local reading directories by 10, and skips
+  fenced examples when opening a file at a heading.
+- Scope progress rows go only under a matching `##` heading, frontmatter updates stay inside the exact `---`
+  delimiters, a capability delta expires only with a readable successor file, and fenced examples no longer count as
+  slice sections or progress tasks.
+- `rig package install` looks for a guidance block's closing marker only after its opening one.
+- A Codex seat keeps its last context reading across quota-only usage records, and a fresh Codex launch keeps git
+  metadata paths that end in whitespace.
 
 ## What to stop doing
 
-- **Stop treating a non-zero work-install exit as proof that nothing changed.** Read the skipped-skill warnings and
-  projection result. Inspection alone changes no skill files; an applied projection can update clean skills while
-  reporting a skipped one.
-- **Stop scripting around the TUI's single-letter keys.** Type the command whole.
-- **Stop assuming a workflow that validated on 0.6.7 can finish.** Validate it again on 0.6.8.
+- **Stop reading "already running" from `rig launch` as healthy** for a seat whose agent may have exited; 0.6.10 says
+  `attention_required`.
+- **Stop reading `rig capture --lines N` as N history lines plus the pane.** Add `--history-plus-pane` for that.
+- **Stop testing compact queue rows for null fields.** They're absent; check `fieldsElided`.
+- **Stop attaching to the default tmux server** when the printed command names `-L` or `-S`.
 
-## Known gaps in 0.6.8
+## Known gaps in 0.6.10
 
-- **Not yet checked on a real machine:** the full first install from nothing, on Mac, Linux and Windows.
+- **`rig queue create --verify` can report `outcome: "indeterminate"` for a row the seat already claimed,** with
+  "Terminal receipt unconfirmed (claimed)." Read `claim` for pickup: neither the claim nor this outcome shows the
+  message was displayed or read. It isn't a failed handoff, so don't re-run the create.
+- **The latest first-install check used 0.6.9 on Linux only.** macOS was last checked with 0.6.8, and native Windows
+  hasn't been checked.
 - **Only one selected lifecycle-help command has been checked in a live Claude session;** source and parser coverage
   is broader. If a help command still asks, report it.
 - **Codex team seats aren't asked before lifecycle commands yet.**
 - **The send gate trusts the most recently recorded hook.** If hooks are recorded out of order, it can hold a send for
   a question that's already answered, or miss one that's waiting. `rig capture` shows the real screen.
 - **A Codex seat whose permission request was approved automatically can still read "needs input".**
-- **A launched team still writes its skills into its working folder.**
+- **A launched team still writes into its working folder;** the operator now says what changes before you agree.
 - **After a restart, `rig status` shows `Kernel: skipped` whatever the kernel seats' state.** Read them with
   `rig ps --nodes --rig kernel --full`.
+- **`rig tui --shared` still attaches on the default tmux server,** so it can't find the dashboard when the daemon runs
+  on a non-default tmux socket. Use `rig tui` there instead.

package/daemon/specs/agents/development/qa/guidance/role.md

@@ -21,3 +21,12 @@ A tiny change can have builder-held verification. When independent QA is selecte
 the evaluator must not be the author. Load browser/dogfood skills only for a
 relevant UI journey. Respect a read-only assignment; fix-and-retest requires that
 scope, and changes make you an author of the repaired candidate.
+
+Run checks the way your permissions expect, so the person isn't stopped for each
+one. Run the project's own test command first: under a team's default
+permissions, test runners such as `npm test` and `pytest` usually run without
+asking, though an explicit permission choice can still require approval. To try
+an input the tests don't cover, run one plain command at a time (for example
+`python3 tip.py 1e30`), not a chained script with pipes, shell functions or
+quoted braces. A new program may still ask the person once, and a plain command
+is one they can allow for later runs.

package/daemon/specs/agents/shared/skills/core/cross-host-rig-commands/SKILL.md

@@ -85,6 +85,7 @@ A local success message alone does not establish remote persistence or pickup.
 | ssh-unreachable | SSH connection, target and transport diagnostics |
 | permission-gate | The configured SSH or HTTP credentials and target policy |
 | remote-daemon-unreachable | Target listener and actual running daemon identity |
+| remote-outcome-unknown | The request may have arrived (timeout, dropped connection, unreadable reply): check its effect, for a send the target pane, before any retry |
 | remote-command-not-found | Remote CLI installation and executable lookup |
 | remote-command-failed | The remote operation's own status and error |
 

package/daemon/specs/agents/shared/skills/core/messaging-the-human/SKILL.md

@@ -104,10 +104,18 @@ a JSON array of 1–4 questions, each
 options (labels up to 75 characters, at most one recommended). Slack shows each
 question as a row of buttons. Each click records that answer on the item, and
 the decision resolves once every question has one. You then receive one reply
-row listing the answers, and the item's `humanAnswers` holds the option ids. The
-human may instead type a reply in the thread; that resolves the decision as
-usual, so read the reply rather than assuming an option was picked. Keep the
-brief complete: the questions add buttons, they do not replace the explanation.
+row listing the answers. In `humanAnswers`, clicked answers are option-id strings.
+A whole typed reply is an object:
+`{kind: "typed-reply", text: "…", placement: "first-unanswered", unansweredCount: N}`.
+It is placed automatically under the first unanswered question; the person did
+not select that question. `N` counts the other question slots still empty in
+`humanAnswers` after that placement.
+Earlier button answers stay intact. Read `text` as the person's words, never as
+an option id even if the strings match. The typed reply still closes the decision
+with the other questions unanswered; `done` is not approval. If every button
+answer was already recorded, that final answer set stays intact and the typed
+reply remains in its correlated reply row. Keep the brief complete: the questions
+add buttons, they do not replace the explanation.
 
 If an existing agent-owned row must wait for a **decision**, block it on the **new live qitem ID**
 (`rig queue block <work-id> --on <human-qitem-id> ...`), not on the human address.

package/daemon/specs/agents/shared/skills/core/topology-mutation-and-seat-management/SKILL.md

@@ -67,8 +67,8 @@ Write a fragment instead when a seat needs something `rig grow` does not set: an
 explicit model, a permission policy, a different agent spec or role profile, a
 per-seat runtime or working directory, or startup files. Use
 `rig expand <rig-id> <pod-fragment-path>` to add a pod, or
-`rig add <rig-id> <pod-namespace> <member-fragment-path>` to add one member to an
-existing pod.
+`rig add <rig> <pod-namespace> <member-fragment-path>` to add one member to an
+existing pod (`<rig>` is the rig id or its exact unique name).
 
 ## Don't use this when
 

package/daemon/specs/rigs/launch/factory/CULTURE.md

@@ -94,3 +94,16 @@ Use `mission-slice-sop` for the active work's artifact and handoff conventions.
 The selected components or wave determine checks and independence; locks and
 Part B proof ceremony apply only when explicitly assigned. The scope audit is
 advisory, not a permission gate.
+
+## Commands that don't stop the person
+
+Under the team's default permissions, `rig` commands, simple read-only commands such as `ls`, `cat` and `grep`, and the
+project's test command usually run without asking. Other commands, and anything that looks like hidden shell code, can
+stop for the person's approval. So keep commands plain:
+- Run `rig` commands as they are: don't pipe their output into `python3` or another program, and don't put
+  `$VARIABLES` in them.
+- Write files with your file-writing tool, not a shell heredoc. A file outside the project folder may still ask: tell
+  the person first.
+- For a check, run the project's test command first. To try an input the tests don't cover, run one plain command at a
+  time (`python3 tip.py 1e30`), not a chained script. To give a program input, put it in a file with your file-writing
+  tool and redirect it (`python3 tip.py < input.txt`) rather than piping it in. A new program may still ask once.

package/daemon/specs/rigs/launch/factory/guidance/lead-first-move.md

@@ -4,6 +4,10 @@ The person's goal usually reaches you from the kernel operator as a queue row: t
 how to reach them. Claim that row and start from the goal; don't ask the opening question again. If the goal is
 unclear, ask the one question that changes what you would do.
 
+Read the row with `rig queue show <id> --full`, which prints it as JSON (the goal is its `body` field), then run
+`rig queue claim <id>` on its own. Keep these and later commands plain, as the team culture's "Commands that don't stop
+the person" says, so they don't stop for the person's approval.
+
 **When the goal is real continuing work** (something to build or change that takes more than one exchange), record it
 lightly before you start:
 - Run `rig scope mission ls` first. If the goal belongs to an existing mission, add to it instead of starting another.
@@ -19,6 +23,12 @@ You plan it and route the work to your team; independent review comes before any
 
 When the goal is done, close the operator's row with the result.
 
+**If a seat you're waiting on stops at a prompt,** for example a reviewer asking to run a command, tell the person in
+your own pane which seat is waiting, exactly what it asks and how to reach it. In
+`rig ps --nodes --json --fields canonicalSessionName,agentActivity,tmuxAttachCommand` that seat shows `needs_input`;
+`rig capture <session>` with its `canonicalSessionName` shows the prompt, and its `tmuxAttachCommand` is the command to
+give (if it has none, give its name). Don't answer another seat's prompt yourself.
+
 `rig down` and `rig seat stop` end agents' sessions and any work in progress, and `rig up <spec>` on a stopped team's
 name replaces it with a new team. Don't run them unless the person asked; check `rig ps --nodes` first.
 
@@ -30,15 +40,18 @@ alongside the goal, and never replace one that exists:
 1. Take the rig's name from `rig whoami --json` (`identity.rigName`). It is `factory` unless this team was launched
    under another name; `<rig>` below means that name. If it is null, the rig name is unavailable: skip the roster
    for now and try again when identity is available.
-2. Run `rig roster list`. If it shows a roster with id `<rig>`, stop here.
-3. The file is `<workspace.root>/rosters/<rig>.json`; `rig config get workspace.root` gives the root. If the file
-   exists, stop here too. Create the `rosters/` folder if it is missing.
+2. Run `rig roster list`. If it shows a roster with id `<rig>`, or warns about `<rig>.json` (a roster file it
+   couldn't read), stop here: never replace that file.
+3. The file is `<workspace.root>/rosters/<rig>.json`; `rig config get workspace.root` gives the root. Step 2 already
+   told you whether this rig has a roster, so don't check the folder from the shell.
 4. Run `rig ps --nodes --rig <rig> --json --fields canonicalSessionName,hostSelfId`. It gives each seat's exact address
    and the host that serves it.
 5. Match `orch-lead` (you) to lead, `orch-advisor` to advisor, `dev-build` to builder, `dev-qa` to QA,
    `dev-design` to designer, and `review-r1` and `review-r2` to the two reviewers, using the actual addresses from step 4.
-   Write the file with those addresses and hosts, today's date, and yourself as curator (format: OpenRig's
-   `$OPENRIG_HOME/reference/rosters.md`):
+   Write the file with those addresses and hosts, today's date, and yourself as curator; the template below is the
+   whole format. Write it with your file-writing tool, not a shell heredoc; if the tool can't create a missing
+   `rosters/` folder, create it first, which may also ask. The file is outside the project folder, so the person may be
+   asked to approve this write: say so in one line first.
 
    ```json
    {

package/daemon/specs/rigs/launch/kernel/agents/operator/agent/guidance/role.md

@@ -165,7 +165,11 @@ configurations, as below; do not take the pin from a cached page summary.
      copy in `workspace.specs_root` or `~/.openrig/specs` would shadow the
      shipped team by name. Copying the folder carries every file the spec
      names relative to itself: its culture file, docs, startup files at rig,
-     pod and member level, services and policy files. Then, in the copy's
+     pod and member level, services and policy files. In Claude Code, make the
+     copy with your Read and Write tools, one file at a time (Write creates the
+     folders), not with `cp -R`: Claude Code asks for approval before `cp` or
+     `mv` with any flag, even though your launch allows them, and that prompt
+     stops the person on their first team. Then, in the copy's
      `rig.yaml`, keep `name:`, change each member's `runtime` to one they have
      and drop that member's `model:` pin. Any reference that climbs out of the
      folder (`local:../…` agent refs, any `../` path) still points at the old
@@ -184,6 +188,13 @@ configurations, as below; do not take the pin from a cached page summary.
 6. **Plan, then ask.** Run `rig up <team, copy path or link> --cwd <folder>
    --plan` (for workshop, with its `--target ~/rigs/workshop`) and tell them
    what will start: how many agents, which providers, in which folder.
+   Say too what launching into their folder changes for their own agent
+   there. A Claude Code team usually adds files such as a `CLAUDE.md`, its
+   skills, `.mcp.json` and `.openrig/`, and its `.claude/settings.local.json`
+   makes their own Claude Code in that folder start in accept-edits mode, with
+   the `exa` and `context7` MCP servers and OpenRig's activity hooks; what a
+   given team writes depends on its configuration. If they'd rather keep
+   their folder as it is, offer a separate copy, such as a git worktree.
    If the plan declares non-interruptive or broad access, say so plainly before asking for their yes.
    Use `applying-a-permission-policy`; for an unset policy, recommend the team
    default rather than `none`. Launch without `--plan` after team-launch
@@ -234,6 +245,14 @@ configurations, as below; do not take the pin from a cached page summary.
    their goal, and identify its pane in the new space or repeat its exact
    attach command from step 8 so they can talk to it. It won't ask the opening
    question again.
+10. **Tell them when a seat waits on them.** A team seat waiting at a prompt
+    shows `needs_input` as its `agentActivity.state` in
+    `rig ps --nodes --rig <team> --json --fields canonicalSessionName,agentActivity,tmuxAttachCommand`,
+    and nothing else tells the person.
+    When you see one, tell them where they already are: which seat, what its
+    prompt asks (`rig capture <session>` with the seat's
+    `canonicalSessionName` shows it) and the seat's `tmuxAttachCommand`, or
+    just its name if it has none. Don't answer another seat's prompt yourself.
 
 Avoid these:
 - launching a team without the person's yes;

package/daemon/specs/rigs/launch/starter/CULTURE.md

@@ -37,3 +37,16 @@ On re-entry read current queue state and project artifacts; do not repeat a
 finished change or launch duplicate seats. Explain the result in terms the
 user can exercise, state what was not checked, and name the next useful action.
 Leave the project ready for another outcome at the same owner address.
+
+## Commands that don't stop the person
+
+Under the team's default permissions, `rig` commands, simple read-only commands such as `ls`, `cat` and `grep`, and the
+project's test command usually run without asking. Other commands, and anything that looks like hidden shell code, can
+stop for the person's approval. So keep commands plain:
+- Run `rig` commands as they are: don't pipe their output into `python3` or another program, and don't put
+  `$VARIABLES` in them.
+- Write files with your file-writing tool, not a shell heredoc. A file outside the project folder may still ask: tell
+  the person first.
+- For a check, run the project's test command first. To try an input the tests don't cover, run one plain command at a
+  time (`python3 tip.py 1e30`), not a chained script. To give a program input, put it in a file with your file-writing
+  tool and redirect it (`python3 tip.py < input.txt`) rather than piping it in. A new program may still ask once.

package/daemon/specs/rigs/launch/starter/guidance/lead-first-move.md

@@ -4,6 +4,10 @@ The person's goal usually reaches you from the kernel operator as a queue row: t
 how to reach them. Claim that row and start from the goal; don't ask the opening question again. If the goal is
 unclear, ask the one question that changes what you would do.
 
+Read the row with `rig queue show <id> --full`, which prints it as JSON (the goal is its `body` field), then run
+`rig queue claim <id>` on its own. Keep these and later commands plain, as the team culture's "Commands that don't stop
+the person" says, so they don't stop for the person's approval.
+
 **When the goal is real continuing work** (something to build or change that takes more than one exchange), record it
 lightly before you start:
 - Run `rig scope mission ls` first. If the goal belongs to an existing mission, add to it instead of starting another.
@@ -19,6 +23,12 @@ You build it and `dev-review` checks it before you call it done.
 
 When the goal is done, close the operator's row with the result.
 
+**If a seat you're waiting on stops at a prompt,** for example a reviewer asking to run a command, tell the person in
+your own pane which seat is waiting, exactly what it asks and how to reach it. In
+`rig ps --nodes --json --fields canonicalSessionName,agentActivity,tmuxAttachCommand` that seat shows `needs_input`;
+`rig capture <session>` with its `canonicalSessionName` shows the prompt, and its `tmuxAttachCommand` is the command to
+give (if it has none, give its name). Don't answer another seat's prompt yourself.
+
 `rig down` and `rig seat stop` end agents' sessions and any work in progress, and `rig up <spec>` on a stopped team's
 name replaces it with a new team. Don't run them unless the person asked; check `rig ps --nodes` first.
 
@@ -30,14 +40,17 @@ alongside the goal, and never replace one that exists:
 1. Take the rig's name from `rig whoami --json` (`identity.rigName`). It is `starter` unless this team was launched
    under another name; `<rig>` below means that name. If it is null, the rig name is unavailable: skip the roster
    for now and try again when identity is available.
-2. Run `rig roster list`. If it shows a roster with id `<rig>`, stop here.
-3. The file is `<workspace.root>/rosters/<rig>.json`; `rig config get workspace.root` gives the root. If the file
-   exists, stop here too. Create the `rosters/` folder if it is missing.
+2. Run `rig roster list`. If it shows a roster with id `<rig>`, or warns about `<rig>.json` (a roster file it
+   couldn't read), stop here: never replace that file.
+3. The file is `<workspace.root>/rosters/<rig>.json`; `rig config get workspace.root` gives the root. Step 2 already
+   told you whether this rig has a roster, so don't check the folder from the shell.
 4. Run `rig ps --nodes --rig <rig> --json --fields canonicalSessionName,hostSelfId`. It gives each seat's exact address
    and the host that serves it.
 5. Match `dev-build` (you) to builder and `dev-review` to reviewer, using the actual addresses from step 4.
-   Write the file with those addresses and hosts, today's date, and yourself as curator (format: OpenRig's
-   `$OPENRIG_HOME/reference/rosters.md`):
+   Write the file with those addresses and hosts, today's date, and yourself as curator; the template below is the
+   whole format. Write it with your file-writing tool, not a shell heredoc; if the tool can't create a missing
+   `rosters/` folder, create it first, which may also ask. The file is outside the project folder, so the person may be
+   asked to approve this write: say so in one line first.
 
    ```json
    {

package/dist/build-info.js

@@ -1,9 +1,9 @@
 // GENERATED by scripts/build-package.sh — the packaged build-identity stamp.
 export const BUILD_INFO = {
-  semver: "0.6.8",
-  commit: "aa126c74d5d1568a6091c037450720c552e50e49",
+  semver: "0.6.10",
+  commit: "3001cc436656c435e54425443e708e3e2d8c7d68",
   dirty: false,
-  builtAt: "2026-10-08T22:15:13Z",
+  builtAt: "2026-10-11T22:36:45Z",
 };
 export function stampFields(info = BUILD_INFO) {
   if (!info.commit) return {};

package/dist/cli-error.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"cli-error.d.ts","sourceRoot":"","sources":["../src/cli-error.ts"],"names":[],"mappings":"AAYA,OAAO,KAAK,EAAE,OAAO,EAAE,MAAM,WAAW,CAAC;AAKzC;;;;GAIG;AACH,wBAAgB,cAAc,CAAC,KAAK,EAAE,MAAM,GAAG,MAAM,CAMpD;AAED,wFAAwF;AACxF,wBAAgB,OAAO,CAAC,OAAO,EAAE,SAAS,MAAM,EAAE,GAAG,CAAC,KAAK,EAAE,MAAM,KAAK,MAAM,CAO7E;AAED,mGAAmG;AACnG,wBAAgB,eAAe,CAAC,IAAI,EAAE,SAAS,MAAM,EAAE,GAAG,OAAO,CAQhE;AAQD,yFAAyF;AACzF,wBAAgB,oBAAoB,CAAC,GAAG,EAAE,OAAO,GAAG,OAAO,CAQ1D;AAED,wBAAgB,cAAc,CAAC,GAAG,EAAE,OAAO,GAAG;IAAE,EAAE,EAAE,KAAK,CAAC;IAAC,KAAK,EAAE;QAAE,IAAI,EAAE,MAAM,CAAC;QAAC,OAAO,EAAE,MAAM,CAAA;KAAE,CAAA;CAAE,CAIpG;AAED,4FAA4F;AAC5F,wBAAgB,iBAAiB,CAAC,OAAO,EAAE,OAAO,GAAG,IAAI,CAMxD;AAED,MAAM,WAAW,YAAY;IAC3B,GAAG,CAAC,EAAE,CAAC,IAAI,EAAE,MAAM,KAAK,IAAI,CAAC;IAC7B,GAAG,CAAC,EAAE,CAAC,IAAI,EAAE,MAAM,KAAK,IAAI,CAAC;IAC7B,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,MAAM,KAAK,IAAI,CAAC;CAC/B;AAED;;;;;;;GAOG;AACH,wBAAgB,0BAA0B,CACxC,CAAC,EAAE,OAAO,EACV,EAAE,EAAE;IAAE,GAAG,EAAE,CAAC,CAAC,EAAE,MAAM,KAAK,IAAI,CAAC;IAAC,GAAG,EAAE,CAAC,CAAC,EAAE,MAAM,KAAK,IAAI,CAAC;IAAC,IAAI,EAAE,OAAO,CAAA;CAAE,GACxE,OAAO,CA6CT;AAED;;;GAGG;AACH,wBAAsB,UAAU,CAAC,OAAO,EAAE,OAAO,EAAE,IAAI,EAAE,MAAM,EAAE,EAAE,EAAE,GAAE,YAAiB,GAAG,OAAO,CAAC,MAAM,CAAC,CA2CzG"}
+{"version":3,"file":"cli-error.d.ts","sourceRoot":"","sources":["../src/cli-error.ts"],"names":[],"mappings":"AAYA,OAAO,KAAK,EAAE,OAAO,EAAE,MAAM,WAAW,CAAC;AAKzC;;;;GAIG;AACH,wBAAgB,cAAc,CAAC,KAAK,EAAE,MAAM,GAAG,MAAM,CAMpD;AAED,wFAAwF;AACxF,wBAAgB,OAAO,CAAC,OAAO,EAAE,SAAS,MAAM,EAAE,GAAG,CAAC,KAAK,EAAE,MAAM,KAAK,MAAM,CAO7E;AAED,mGAAmG;AACnG,wBAAgB,eAAe,CAAC,IAAI,EAAE,SAAS,MAAM,EAAE,GAAG,OAAO,CAShE;AAQD,yFAAyF;AACzF,wBAAgB,oBAAoB,CAAC,GAAG,EAAE,OAAO,GAAG,OAAO,CAQ1D;AAED,wBAAgB,cAAc,CAAC,GAAG,EAAE,OAAO,GAAG;IAAE,EAAE,EAAE,KAAK,CAAC;IAAC,KAAK,EAAE;QAAE,IAAI,EAAE,MAAM,CAAC;QAAC,OAAO,EAAE,MAAM,CAAA;KAAE,CAAA;CAAE,CAIpG;AAED,4FAA4F;AAC5F,wBAAgB,iBAAiB,CAAC,OAAO,EAAE,OAAO,GAAG,IAAI,CAMxD;AAED,MAAM,WAAW,YAAY;IAC3B,GAAG,CAAC,EAAE,CAAC,IAAI,EAAE,MAAM,KAAK,IAAI,CAAC;IAC7B,GAAG,CAAC,EAAE,CAAC,IAAI,EAAE,MAAM,KAAK,IAAI,CAAC;IAC7B,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,MAAM,KAAK,IAAI,CAAC;CAC/B;AAED;;;;;;;GAOG;AACH,wBAAgB,0BAA0B,CACxC,CAAC,EAAE,OAAO,EACV,EAAE,EAAE;IAAE,GAAG,EAAE,CAAC,CAAC,EAAE,MAAM,KAAK,IAAI,CAAC;IAAC,GAAG,EAAE,CAAC,CAAC,EAAE,MAAM,KAAK,IAAI,CAAC;IAAC,IAAI,EAAE,OAAO,CAAA;CAAE,GACxE,OAAO,CA6CT;AAED;;;GAGG;AACH,wBAAsB,UAAU,CAAC,OAAO,EAAE,OAAO,EAAE,IAAI,EAAE,MAAM,EAAE,EAAE,EAAE,GAAE,YAAiB,GAAG,OAAO,CAAC,MAAM,CAAC,CA2CzG"}

package/dist/cli-error.js

@@ -26,6 +26,8 @@ export function enumArg(allowed) {
 export function wantsJsonOutput(argv) {
     for (let i = 0; i < argv.length; i++) {
         const a = argv[i];
+        if (a === "--")
+            break;
         if (a === "--json")
             return true;
         if ((a === "-o" || a === "--output" || a === "--format") && argv[i + 1] === "json")

package/dist/cli-error.js.map

@@ -1 +1 @@
-{"version":3,"file":"cli-error.js","sourceRoot":"","sources":["../src/cli-error.ts"],"names":[],"mappings":"AAaA,OAAO,EAAE,oBAAoB,EAAE,MAAM,WAAW,CAAC;AACjD,OAAO,EAAE,qBAAqB,EAAE,mBAAmB,EAAE,kBAAkB,EAAE,MAAM,aAAa,CAAC;AAC7F,OAAO,EAAE,yBAAyB,EAAE,uBAAuB,EAAE,MAAM,0BAA0B,CAAC;AAE9F;;;;GAIG;AACH,MAAM,UAAU,cAAc,CAAC,KAAa;IAC1C,MAAM,CAAC,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC;IACxB,IAAI,CAAC,MAAM,CAAC,SAAS,CAAC,CAAC,CAAC,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC;QAClC,MAAM,IAAI,oBAAoB,CAAC,2CAA2C,KAAK,GAAG,CAAC,CAAC;IACtF,CAAC;IACD,OAAO,CAAC,CAAC;AACX,CAAC;AAED,wFAAwF;AACxF,MAAM,UAAU,OAAO,CAAC,OAA0B;IAChD,OAAO,CAAC,KAAa,EAAU,EAAE;QAC/B,IAAI,CAAC,OAAO,CAAC,QAAQ,CAAC,KAAK,CAAC,EAAE,CAAC;YAC7B,MAAM,IAAI,oBAAoB,CAAC,mBAAmB,OAAO,CAAC,IAAI,CAAC,IAAI,CAAC,UAAU,KAAK,GAAG,CAAC,CAAC;QAC1F,CAAC;QACD,OAAO,KAAK,CAAC;IACf,CAAC,CAAC;AACJ,CAAC;AAED,mGAAmG;AACnG,MAAM,UAAU,eAAe,CAAC,IAAuB;IACrD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;QACrC,MAAM,CAAC,GAAG,IAAI,CAAC,CAAC,CAAE,CAAC;QACnB,IAAI,CAAC,KAAK,QAAQ;YAAE,OAAO,IAAI,CAAC;QAChC,IAAI,CAAC,CAAC,KAAK,IAAI,IAAI,CAAC,KAAK,UAAU,IAAI,CAAC,KAAK,UAAU,CAAC,IAAI,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC,KAAK,MAAM;YAAE,OAAO,IAAI,CAAC;QAChG,IAAI,iCAAiC,CAAC,IAAI,CAAC,CAAC,CAAC;YAAE,OAAO,IAAI,CAAC;IAC7D,CAAC;IACD,OAAO,KAAK,CAAC;AACf,CAAC;AAQD,yFAAyF;AACzF,MAAM,UAAU,oBAAoB,CAAC,GAAY;IAC/C,MAAM,CAAC,GAAG,GAAyB,CAAC;IACpC,OAAO,CACL,CAAC,EAAE,IAAI,KAAK,yBAAyB;QACrC,CAAC,EAAE,IAAI,KAAK,mBAAmB;QAC/B,CAAC,EAAE,IAAI,KAAK,gBAAgB;QAC5B,CAAC,OAAO,CAAC,EAAE,QAAQ,KAAK,QAAQ,IAAI,CAAC,CAAC,QAAQ,KAAK,CAAC,CAAC,CACtD,CAAC;AACJ,CAAC;AAED,MAAM,UAAU,cAAc,CAAC,GAAY;IACzC,MAAM,CAAC,GAAG,GAAyB,CAAC;IACpC,MAAM,OAAO,GAAG,CAAC,CAAC,EAAE,OAAO,IAAI,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,OAAO,CAAC,aAAa,EAAE,EAAE,CAAC,CAAC,IAAI,EAAE,CAAC;IAC9E,OAAO,EAAE,EAAE,EAAE,KAAK,EAAE,KAAK,EAAE,EAAE,IAAI,EAAE,CAAC,EAAE,IAAI,IAAI,WAAW,EAAE,OAAO,EAAE,EAAE,CAAC;AACzE,CAAC;AAED,4FAA4F;AAC5F,MAAM,UAAU,iBAAiB,CAAC,OAAgB;IAChD,MAAM,IAAI,GAAG,CAAC,GAAY,EAAE,EAAE;QAC5B,GAAG,CAAC,YAAY,EAAE,CAAC;QACnB,KAAK,MAAM,GAAG,IAAI,GAAG,CAAC,QAAQ;YAAE,IAAI,CAAC,GAAG,CAAC,CAAC;IAC5C,CAAC,CAAC;IACF,IAAI,CAAC,OAAO,CAAC,CAAC;AAChB,CAAC;AAQD;;;;;;;GAOG;AACH,MAAM,UAAU,0BAA0B,CACxC,CAAU,EACV,EAAyE;IAEzE,IAAI,KAA4F,CAAC;IACjG,8EAA8E;IAC9E,IAAI,CAAC,YAAY,mBAAmB,EAAE,CAAC;QACrC,KAAK,GAAG;YACN,IAAI,EAAE,CAAC,CAAC,OAAO;YACf,WAAW,EAAE,yEAAyE;YACtF,MAAM,EACJ,uLAAuL;SAC1L,CAAC;IACJ,CAAC;SAAM,IAAI,CAAC,YAAY,kBAAkB,EAAE,CAAC;QAC3C,KAAK,GAAG;YACN,IAAI,EAAE,CAAC,CAAC,OAAO;YACf,WAAW,EAAE,uEAAuE;YACpF,MAAM,EACJ,gLAAgL;SACnL,CAAC;IACJ,CAAC;SAAM,IAAI,CAAC,YAAY,qBAAqB,EAAE,CAAC;QAC9C,MAAM,YAAY,GAAG,CAAC,CAAC,YAAY,KAAK,SAAS,CAAC;QAClD,MAAM,SAAS,GAAG,sGAAsG,CAAC;QACzH,MAAM,QAAQ,GAAG,YAAY;YAC3B,CAAC,CAAC,gGAAgG;YAClG,CAAC,CAAC,gCAAgC,CAAC;QACrC,kFAAkF;QAClF,MAAM,OAAO,GAAG,uBAAuB,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,CAAC,yBAAyB,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,CAAC,SAAS,CAAC;QAC1G,KAAK,GAAG;YACN,IAAI,EAAE,CAAC,CAAC,OAAO;YACf,WAAW,EAAE,OAAO,CAAC,CAAC,CAAC,GAAG,QAAQ,IAAI,OAAO,CAAC,WAAW,EAAE,CAAC,CAAC,CAAC,QAAQ;YACtE,MAAM,EAAE,OAAO;gBACb,CAAC,CAAC,CAAC,YAAY,CAAC,CAAC,CAAC,GAAG,OAAO,CAAC,MAAM,IAAI,SAAS,EAAE,CAAC,CAAC,CAAC,OAAO,CAAC,MAAM,CAAC;gBACpE,CAAC,CAAC,YAAY;oBACZ,CAAC,CAAC,oGAAoG,SAAS,EAAE;oBACjH,CAAC,CAAC,wHAAwH;YAC9H,GAAG,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,EAAE,SAAS,EAAE,CAAC,CAAC,SAAS,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;SACnD,CAAC;IACJ,CAAC;IACD,IAAI,CAAC,KAAK;QAAE,OAAO,KAAK,CAAC;IACzB,IAAI,EAAE,CAAC,IAAI,EAAE,CAAC;QACZ,EAAE,CAAC,GAAG,CAAC,IAAI,CAAC,SAAS,CAAC,EAAE,KAAK,EAAE,KAAK,EAAE,CAAC,CAAC,CAAC;IAC3C,CAAC;SAAM,CAAC;QACN,EAAE,CAAC,GAAG,CAAC,KAAK,CAAC,IAAI,CAAC,CAAC;QACnB,EAAE,CAAC,GAAG,CAAC,KAAK,KAAK,CAAC,WAAW,EAAE,CAAC,CAAC;QACjC,EAAE,CAAC,GAAG,CAAC,KAAK,KAAK,CAAC,MAAM,EAAE,CAAC,CAAC;IAC9B,CAAC;IACD,OAAO,IAAI,CAAC;AACd,CAAC;AAED;;;GAGG;AACH,MAAM,CAAC,KAAK,UAAU,UAAU,CAAC,OAAgB,EAAE,IAAc,EAAE,KAAmB,EAAE;IACtF,MAAM,GAAG,GAAG,EAAE,CAAC,GAAG,IAAI,CAAC,CAAC,CAAS,EAAE,EAAE,CAAC,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC,GAAG,IAAI,CAAC,CAAC,CAAC;IACtE,MAAM,GAAG,GAAG,EAAE,CAAC,GAAG,IAAI,CAAC,CAAC,CAAS,EAAE,EAAE,CAAC,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC,GAAG,IAAI,CAAC,CAAC,CAAC;IACtE,MAAM,IAAI,GAAG,EAAE,CAAC,IAAI,IAAI,CAAC,CAAC,CAAS,EAAE,EAAE,CAAC,OAAO,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC;IACzD,MAAM,IAAI,GAAG,eAAe,CAAC,IAAI,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC;IAE5C,iBAAiB,CAAC,OAAO,CAAC,CAAC;IAC3B,iFAAiF;IACjF,gFAAgF;IAChF,4FAA4F;IAC5F,wFAAwF;IACxF,IAAI,cAAc,GAAG,KAAK,CAAC;IAC3B,MAAM,WAAW,GAAG,CAAC,GAAY,EAAE,EAAE;QACnC,GAAG,CAAC,eAAe,CAAC,EAAE,QAAQ,EAAE,CAAC,GAAW,EAAE,EAAE,GAAG,cAAc,GAAG,IAAI,CAAC,CAAC,IAAI,CAAC,IAAI;gBAAE,GAAG,CAAC,GAAG,CAAC,OAAO,CAAC,KAAK,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC;QACvH,KAAK,MAAM,GAAG,IAAI,GAAG,CAAC,QAAQ;YAAE,WAAW,CAAC,GAAG,CAAC,CAAC;IACnD,CAAC,CAAC;IACF,WAAW,CAAC,OAAO,CAAC,CAAC;IAErB,IAAI,CAAC;QACH,MAAM,OAAO,CAAC,UAAU,CAAC,IAAI,CAAC,CAAC;QAC/B,OAAO,CAAC,CAAC;IACX,CAAC;IAAC,OAAO,CAAC,EAAE,CAAC;QACX,IAAI,oBAAoB,CAAC,CAAC,CAAC;YAAE,OAAO,CAAC,CAAC;QACtC,8EAA8E;QAC9E,2EAA2E;QAC3E,2EAA2E;QAC3E,IAAI,0BAA0B,CAAC,CAAC,EAAE,EAAE,GAAG,EAAE,GAAG,EAAE,IAAI,EAAE,CAAC,EAAE,CAAC;YACtD,IAAI,CAAC,CAAC,CAAC,CAAC;YACR,OAAO,CAAC,CAAC;QACX,CAAC;QACD,MAAM,IAAI,GAAI,CAAwB,EAAE,QAAQ,IAAI,CAAC,CAAC;QACtD,IAAI,IAAI,EAAE,CAAC;YACT,GAAG,CAAC,IAAI,CAAC,SAAS,CAAC,cAAc,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;QACzC,CAAC;aAAM,IAAI,CAAC,cAAc,EAAE,CAAC;YAC3B,4FAA4F;YAC5F,4FAA4F;YAC5F,8FAA8F;YAC9F,wBAAwB;YACxB,GAAG,CAAC,UAAU,cAAc,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,OAAO,EAAE,CAAC,CAAC;QACnD,CAAC;QACD,IAAI,CAAC,IAAI,IAAI,CAAC,CAAC,CAAC;QAChB,OAAO,IAAI,IAAI,CAAC,CAAC;IACnB,CAAC;AACH,CAAC"}
+{"version":3,"file":"cli-error.js","sourceRoot":"","sources":["../src/cli-error.ts"],"names":[],"mappings":"AAaA,OAAO,EAAE,oBAAoB,EAAE,MAAM,WAAW,CAAC;AACjD,OAAO,EAAE,qBAAqB,EAAE,mBAAmB,EAAE,kBAAkB,EAAE,MAAM,aAAa,CAAC;AAC7F,OAAO,EAAE,yBAAyB,EAAE,uBAAuB,EAAE,MAAM,0BAA0B,CAAC;AAE9F;;;;GAIG;AACH,MAAM,UAAU,cAAc,CAAC,KAAa;IAC1C,MAAM,CAAC,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC;IACxB,IAAI,CAAC,MAAM,CAAC,SAAS,CAAC,CAAC,CAAC,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC;QAClC,MAAM,IAAI,oBAAoB,CAAC,2CAA2C,KAAK,GAAG,CAAC,CAAC;IACtF,CAAC;IACD,OAAO,CAAC,CAAC;AACX,CAAC;AAED,wFAAwF;AACxF,MAAM,UAAU,OAAO,CAAC,OAA0B;IAChD,OAAO,CAAC,KAAa,EAAU,EAAE;QAC/B,IAAI,CAAC,OAAO,CAAC,QAAQ,CAAC,KAAK,CAAC,EAAE,CAAC;YAC7B,MAAM,IAAI,oBAAoB,CAAC,mBAAmB,OAAO,CAAC,IAAI,CAAC,IAAI,CAAC,UAAU,KAAK,GAAG,CAAC,CAAC;QAC1F,CAAC;QACD,OAAO,KAAK,CAAC;IACf,CAAC,CAAC;AACJ,CAAC;AAED,mGAAmG;AACnG,MAAM,UAAU,eAAe,CAAC,IAAuB;IACrD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;QACrC,MAAM,CAAC,GAAG,IAAI,CAAC,CAAC,CAAE,CAAC;QACnB,IAAI,CAAC,KAAK,IAAI;YAAE,MAAM;QACtB,IAAI,CAAC,KAAK,QAAQ;YAAE,OAAO,IAAI,CAAC;QAChC,IAAI,CAAC,CAAC,KAAK,IAAI,IAAI,CAAC,KAAK,UAAU,IAAI,CAAC,KAAK,UAAU,CAAC,IAAI,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC,KAAK,MAAM;YAAE,OAAO,IAAI,CAAC;QAChG,IAAI,iCAAiC,CAAC,IAAI,CAAC,CAAC,CAAC;YAAE,OAAO,IAAI,CAAC;IAC7D,CAAC;IACD,OAAO,KAAK,CAAC;AACf,CAAC;AAQD,yFAAyF;AACzF,MAAM,UAAU,oBAAoB,CAAC,GAAY;IAC/C,MAAM,CAAC,GAAG,GAAyB,CAAC;IACpC,OAAO,CACL,CAAC,EAAE,IAAI,KAAK,yBAAyB;QACrC,CAAC,EAAE,IAAI,KAAK,mBAAmB;QAC/B,CAAC,EAAE,IAAI,KAAK,gBAAgB;QAC5B,CAAC,OAAO,CAAC,EAAE,QAAQ,KAAK,QAAQ,IAAI,CAAC,CAAC,QAAQ,KAAK,CAAC,CAAC,CACtD,CAAC;AACJ,CAAC;AAED,MAAM,UAAU,cAAc,CAAC,GAAY;IACzC,MAAM,CAAC,GAAG,GAAyB,CAAC;IACpC,MAAM,OAAO,GAAG,CAAC,CAAC,EAAE,OAAO,IAAI,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,OAAO,CAAC,aAAa,EAAE,EAAE,CAAC,CAAC,IAAI,EAAE,CAAC;IAC9E,OAAO,EAAE,EAAE,EAAE,KAAK,EAAE,KAAK,EAAE,EAAE,IAAI,EAAE,CAAC,EAAE,IAAI,IAAI,WAAW,EAAE,OAAO,EAAE,EAAE,CAAC;AACzE,CAAC;AAED,4FAA4F;AAC5F,MAAM,UAAU,iBAAiB,CAAC,OAAgB;IAChD,MAAM,IAAI,GAAG,CAAC,GAAY,EAAE,EAAE;QAC5B,GAAG,CAAC,YAAY,EAAE,CAAC;QACnB,KAAK,MAAM,GAAG,IAAI,GAAG,CAAC,QAAQ;YAAE,IAAI,CAAC,GAAG,CAAC,CAAC;IAC5C,CAAC,CAAC;IACF,IAAI,CAAC,OAAO,CAAC,CAAC;AAChB,CAAC;AAQD;;;;;;;GAOG;AACH,MAAM,UAAU,0BAA0B,CACxC,CAAU,EACV,EAAyE;IAEzE,IAAI,KAA4F,CAAC;IACjG,8EAA8E;IAC9E,IAAI,CAAC,YAAY,mBAAmB,EAAE,CAAC;QACrC,KAAK,GAAG;YACN,IAAI,EAAE,CAAC,CAAC,OAAO;YACf,WAAW,EAAE,yEAAyE;YACtF,MAAM,EACJ,uLAAuL;SAC1L,CAAC;IACJ,CAAC;SAAM,IAAI,CAAC,YAAY,kBAAkB,EAAE,CAAC;QAC3C,KAAK,GAAG;YACN,IAAI,EAAE,CAAC,CAAC,OAAO;YACf,WAAW,EAAE,uEAAuE;YACpF,MAAM,EACJ,gLAAgL;SACnL,CAAC;IACJ,CAAC;SAAM,IAAI,CAAC,YAAY,qBAAqB,EAAE,CAAC;QAC9C,MAAM,YAAY,GAAG,CAAC,CAAC,YAAY,KAAK,SAAS,CAAC;QAClD,MAAM,SAAS,GAAG,sGAAsG,CAAC;QACzH,MAAM,QAAQ,GAAG,YAAY;YAC3B,CAAC,CAAC,gGAAgG;YAClG,CAAC,CAAC,gCAAgC,CAAC;QACrC,kFAAkF;QAClF,MAAM,OAAO,GAAG,uBAAuB,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,CAAC,yBAAyB,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,CAAC,SAAS,CAAC;QAC1G,KAAK,GAAG;YACN,IAAI,EAAE,CAAC,CAAC,OAAO;YACf,WAAW,EAAE,OAAO,CAAC,CAAC,CAAC,GAAG,QAAQ,IAAI,OAAO,CAAC,WAAW,EAAE,CAAC,CAAC,CAAC,QAAQ;YACtE,MAAM,EAAE,OAAO;gBACb,CAAC,CAAC,CAAC,YAAY,CAAC,CAAC,CAAC,GAAG,OAAO,CAAC,MAAM,IAAI,SAAS,EAAE,CAAC,CAAC,CAAC,OAAO,CAAC,MAAM,CAAC;gBACpE,CAAC,CAAC,YAAY;oBACZ,CAAC,CAAC,oGAAoG,SAAS,EAAE;oBACjH,CAAC,CAAC,wHAAwH;YAC9H,GAAG,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,EAAE,SAAS,EAAE,CAAC,CAAC,SAAS,EAAE,CAAC,CAAC,CAAC,EAAE,CAAC;SACnD,CAAC;IACJ,CAAC;IACD,IAAI,CAAC,KAAK;QAAE,OAAO,KAAK,CAAC;IACzB,IAAI,EAAE,CAAC,IAAI,EAAE,CAAC;QACZ,EAAE,CAAC,GAAG,CAAC,IAAI,CAAC,SAAS,CAAC,EAAE,KAAK,EAAE,KAAK,EAAE,CAAC,CAAC,CAAC;IAC3C,CAAC;SAAM,CAAC;QACN,EAAE,CAAC,GAAG,CAAC,KAAK,CAAC,IAAI,CAAC,CAAC;QACnB,EAAE,CAAC,GAAG,CAAC,KAAK,KAAK,CAAC,WAAW,EAAE,CAAC,CAAC;QACjC,EAAE,CAAC,GAAG,CAAC,KAAK,KAAK,CAAC,MAAM,EAAE,CAAC,CAAC;IAC9B,CAAC;IACD,OAAO,IAAI,CAAC;AACd,CAAC;AAED;;;GAGG;AACH,MAAM,CAAC,KAAK,UAAU,UAAU,CAAC,OAAgB,EAAE,IAAc,EAAE,KAAmB,EAAE;IACtF,MAAM,GAAG,GAAG,EAAE,CAAC,GAAG,IAAI,CAAC,CAAC,CAAS,EAAE,EAAE,CAAC,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC,GAAG,IAAI,CAAC,CAAC,CAAC;IACtE,MAAM,GAAG,GAAG,EAAE,CAAC,GAAG,IAAI,CAAC,CAAC,CAAS,EAAE,EAAE,CAAC,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC,GAAG,IAAI,CAAC,CAAC,CAAC;IACtE,MAAM,IAAI,GAAG,EAAE,CAAC,IAAI,IAAI,CAAC,CAAC,CAAS,EAAE,EAAE,CAAC,OAAO,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC;IACzD,MAAM,IAAI,GAAG,eAAe,CAAC,IAAI,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC;IAE5C,iBAAiB,CAAC,OAAO,CAAC,CAAC;IAC3B,iFAAiF;IACjF,gFAAgF;IAChF,4FAA4F;IAC5F,wFAAwF;IACxF,IAAI,cAAc,GAAG,KAAK,CAAC;IAC3B,MAAM,WAAW,GAAG,CAAC,GAAY,EAAE,EAAE;QACnC,GAAG,CAAC,eAAe,CAAC,EAAE,QAAQ,EAAE,CAAC,GAAW,EAAE,EAAE,GAAG,cAAc,GAAG,IAAI,CAAC,CAAC,IAAI,CAAC,IAAI;gBAAE,GAAG,CAAC,GAAG,CAAC,OAAO,CAAC,KAAK,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC;QACvH,KAAK,MAAM,GAAG,IAAI,GAAG,CAAC,QAAQ;YAAE,WAAW,CAAC,GAAG,CAAC,CAAC;IACnD,CAAC,CAAC;IACF,WAAW,CAAC,OAAO,CAAC,CAAC;IAErB,IAAI,CAAC;QACH,MAAM,OAAO,CAAC,UAAU,CAAC,IAAI,CAAC,CAAC;QAC/B,OAAO,CAAC,CAAC;IACX,CAAC;IAAC,OAAO,CAAC,EAAE,CAAC;QACX,IAAI,oBAAoB,CAAC,CAAC,CAAC;YAAE,OAAO,CAAC,CAAC;QACtC,8EAA8E;QAC9E,2EAA2E;QAC3E,2EAA2E;QAC3E,IAAI,0BAA0B,CAAC,CAAC,EAAE,EAAE,GAAG,EAAE,GAAG,EAAE,IAAI,EAAE,CAAC,EAAE,CAAC;YACtD,IAAI,CAAC,CAAC,CAAC,CAAC;YACR,OAAO,CAAC,CAAC;QACX,CAAC;QACD,MAAM,IAAI,GAAI,CAAwB,EAAE,QAAQ,IAAI,CAAC,CAAC;QACtD,IAAI,IAAI,EAAE,CAAC;YACT,GAAG,CAAC,IAAI,CAAC,SAAS,CAAC,cAAc,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;QACzC,CAAC;aAAM,IAAI,CAAC,cAAc,EAAE,CAAC;YAC3B,4FAA4F;YAC5F,4FAA4F;YAC5F,8FAA8F;YAC9F,wBAAwB;YACxB,GAAG,CAAC,UAAU,cAAc,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,OAAO,EAAE,CAAC,CAAC;QACnD,CAAC;QACD,IAAI,CAAC,IAAI,IAAI,CAAC,CAAC,CAAC;QAChB,OAAO,IAAI,IAAI,CAAC,CAAC;IACnB,CAAC;AACH,CAAC"}

package/dist/commands/add.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"add.d.ts","sourceRoot":"","sources":["../../src/commands/add.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,OAAO,EAAE,MAAM,WAAW,CAAC;AAKpC,OAAO,KAAK,EAAE,UAAU,EAAE,MAAM,aAAa,CAAC;AAiB9C,wBAAgB,gBAAgB,CAAC,YAAY,CAAC,EAAE,UAAU,GAAG,OAAO,CAgHnE"}
+{"version":3,"file":"add.d.ts","sourceRoot":"","sources":["../../src/commands/add.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,OAAO,EAAE,MAAM,WAAW,CAAC;AAQpC,OAAO,KAAK,EAAE,UAAU,EAAE,MAAM,aAAa,CAAC;AAsB9C,wBAAgB,gBAAgB,CAAC,YAAY,CAAC,EAAE,UAAU,GAAG,OAAO,CA+JnE"}