@opengeoweb/sigmet-airmet 4.14.1 → 4.15.0

package/index.esm.js

@@ -1467,27 +1467,52 @@ var DrawTools = function DrawTools(_ref) {
   }))));
 };
 
-var invalidLevelsTill4900FTStepsMessage = 'Levels must be rounded to the nearest 100ft';
-var invalidLevelsFrom50FLStepsMessage = 'Levels must be rounded to the nearest 5';
+var DEFAULT_ROUNDING_LEVELS_FL = 100;
+var DEFAULT_ROUNDING_LEVELS_FT = 5;
+var DEFAULT_ROUNDING_LEVELS_M = 1;
+var getLevelInvalidStepsForFLUnitMessage = function getLevelInvalidStepsForFLUnitMessage() {
+  var value = arguments.length > 0 && arguments[0] !== undefined ? arguments[0] : DEFAULT_ROUNDING_LEVELS_FL;
+  return "Levels must be rounded to the nearest ".concat(value);
+};
+var getLevelInvalidStepsForFTUnitMessage = function getLevelInvalidStepsForFTUnitMessage() {
+  var value = arguments.length > 0 && arguments[0] !== undefined ? arguments[0] : DEFAULT_ROUNDING_LEVELS_FT;
+  return "Levels must be rounded to the nearest ".concat(value, "ft");
+};
+var getLevelInvalidStepsForMUnitMessage = function getLevelInvalidStepsForMUnitMessage() {
+  var value = arguments.length > 0 && arguments[0] !== undefined ? arguments[0] : DEFAULT_ROUNDING_LEVELS_M;
+  return "Levels must be rounded to the nearest ".concat(value, "m");
+};
+var invalidUnitMessage$1 = 'Level unit not defined';
 
-var _validateLevels = function validateLevels(value, unit) {
+var _validateLevels = function validateLevels(value, unit, productConfig, selectedFIR) {
   if (isEmpty(value)) {
     return true;
-  } // Parse to integer to check for steps
+  }
+
+  var _getActiveFIRArea = getActiveFIRArea(selectedFIR, productConfig),
+      _getActiveFIRArea$lev = _getActiveFIRArea.level_rounding_FL,
+      level_rounding_FL = _getActiveFIRArea$lev === void 0 ? DEFAULT_ROUNDING_LEVELS_FL : _getActiveFIRArea$lev,
+      _getActiveFIRArea$lev2 = _getActiveFIRArea.level_rounding_FT,
+      level_rounding_FT = _getActiveFIRArea$lev2 === void 0 ? DEFAULT_ROUNDING_LEVELS_FT : _getActiveFIRArea$lev2,
+      _getActiveFIRArea$lev3 = _getActiveFIRArea.level_rounding_M,
+      level_rounding_M = _getActiveFIRArea$lev3 === void 0 ? DEFAULT_ROUNDING_LEVELS_M : _getActiveFIRArea$lev3; // Parse to integer to check for steps
 
 
   var intLevel = parseInt(value, 10);
 
   if (LevelUnits[unit] === LevelUnits.FT) {
-    return intLevel % 100 === 0 || invalidLevelsTill4900FTStepsMessage;
+    return intLevel % level_rounding_FT === 0 || getLevelInvalidStepsForFTUnitMessage(level_rounding_FT);
   }
 
   if (LevelUnits[unit] === LevelUnits.FL) {
-    return intLevel % 5 === 0 || invalidLevelsFrom50FLStepsMessage;
-  } // For meters the allowed step is 1, so always valid
+    return intLevel % level_rounding_FL === 0 || getLevelInvalidStepsForFLUnitMessage(level_rounding_FL);
+  }
 
+  if (LevelUnits[unit] === LevelUnits.M) {
+    return intLevel % level_rounding_M === 0 || getLevelInvalidStepsForMUnitMessage(level_rounding_M);
+  }
 
-  return true;
+  return invalidUnitMessage$1;
 };
 var invalidLevelUnitCombinationMessage = 'Invalid unit combination';
 
@@ -1631,7 +1656,7 @@ var Levels = function Levels(_ref) {
         },
         validateLevels: function validateLevels(value) {
           return (// level step depends on the unit
-            _validateLevels(value, getValues('level.unit'))
+            _validateLevels(value, getValues('level.unit'), productConfig, selectedFIR)
           );
         }
       }
@@ -1709,7 +1734,7 @@ var Levels = function Levels(_ref) {
         },
         validateLevels: function validateLevels(value) {
           return (// level step depends on the unit
-            _validateLevels(value, getValues('level.unit'))
+            _validateLevels(value, getValues('level.unit'), productConfig, selectedFIR)
           );
         }
       }
@@ -1809,7 +1834,7 @@ var Levels = function Levels(_ref) {
         },
         validateLevels: function validateLevels(value) {
           return (// level step depends on the unit
-            _validateLevels(value, getValues('lowerLevel.unit'))
+            _validateLevels(value, getValues('lowerLevel.unit'), productConfig, selectedFIR)
           );
         }
       }
@@ -1896,7 +1921,7 @@ var Levels = function Levels(_ref) {
         },
         validateLevels: function validateLevels(value) {
           return (// level step depends on the unit
-            _validateLevels(value, getValues('level.unit'))
+            _validateLevels(value, getValues('level.unit'), productConfig, selectedFIR)
           );
         }
       }
@@ -2169,23 +2194,38 @@ var StartGeometry = function StartGeometry(_ref) {
  * Copyright 2022 - Koninklijk Nederlands Meteorologisch Instituut (KNMI)
  * Copyright 2022 - Finnish Meteorological Institute (FMI)
  * */
+var DEFAULT_ROUNDING_MOVEMENT_KT = 5;
+var DEFAULT_ROUNDING_MOVEMENT_KMH = 10;
+var getMovementStepValKTMessage = function getMovementStepValKTMessage() {
+  var value = arguments.length > 0 && arguments[0] !== undefined ? arguments[0] : DEFAULT_ROUNDING_MOVEMENT_KT;
+  return "Speed should be rounded to the nearest ".concat(value, "kt");
+};
+var getMovementStepValKMHMessage = function getMovementStepValKMHMessage() {
+  var value = arguments.length > 0 && arguments[0] !== undefined ? arguments[0] : DEFAULT_ROUNDING_MOVEMENT_KMH;
+  return "Speed should be rounded to the nearest ".concat(value, "kmh");
+};
 var coordinatesEmptyMessage = 'An end position drawing is required when selecting End position';
-var movementStepValMessageKT = 'Speed should be rounded to the nearest 5kt';
-var movementStepValMessageKMH = 'Speed should be rounded to the nearest 10kmh';
 var noIntersectionMessage = 'The end position needs to be (partly) inside the FIR';
 var maximum6PointsMessage = 'The end position drawing allows a maximum of 6 individual points';
 
-var _validateMovementSteps = function validateMovementSteps(value, unit) {
-  if (isEmpty(value)) return true; // Parse to integer to check for steps
+var _validateMovementSteps = function validateMovementSteps(value, unit, productConfig, selectedFIR) {
+  if (isEmpty(value)) return true;
+
+  var _getActiveFIRArea = getActiveFIRArea(selectedFIR, productConfig),
+      _getActiveFIRArea$mov = _getActiveFIRArea.movement_rounding_kt,
+      movement_rounding_kt = _getActiveFIRArea$mov === void 0 ? DEFAULT_ROUNDING_MOVEMENT_KT : _getActiveFIRArea$mov,
+      _getActiveFIRArea$mov2 = _getActiveFIRArea.movement_rounding_kmh,
+      movement_rounding_kmh = _getActiveFIRArea$mov2 === void 0 ? DEFAULT_ROUNDING_MOVEMENT_KMH : _getActiveFIRArea$mov2; // Parse to integer to check for steps
+
 
   var intLevel = parseInt(value, 10);
 
   if (MovementUnit[unit] === MovementUnit.KT) {
-    return intLevel % 5 === 0 || movementStepValMessageKT;
+    return intLevel % movement_rounding_kt === 0 || getMovementStepValKTMessage(movement_rounding_kt);
   }
 
   if (MovementUnit[unit] === MovementUnit.KMH) {
-    return intLevel % 10 === 0 || movementStepValMessageKMH;
+    return intLevel % movement_rounding_kmh === 0 || getMovementStepValKMHMessage(movement_rounding_kmh);
   }
 
   return 'Invalid unit';
@@ -2342,7 +2382,7 @@ var Progress = function Progress(_ref) {
         },
         validateMovementSteps: function validateMovementSteps(value) {
           return (// movement step depends on the unit
-            _validateMovementSteps(value, getValues('movementUnit'))
+            _validateMovementSteps(value, getValues('movementUnit'), productConfig, selectedFIR)
           );
         }
       }
@@ -2839,18 +2879,34 @@ var VolcanicFields = function VolcanicFields(_ref) {
  * Copyright 2021 - Koninklijk Nederlands Meteorologisch Instituut (KNMI)
  * Copyright 2021 - Finnish Meteorological Institute (FMI)
  * */
-var invalidSurfaceVisibilityTill750StepsMessage = 'A visibility below 750m must be rounded to the nearest 50m';
-var invalidSurfaceVisibilityFrom750StepsMessage = 'A visibility above 750m must be rounded to the nearest 100m';
-var validateSurfaceVisibility = function validateSurfaceVisibility(value) {
-  if (isEmpty(value)) return true; // Parse to integer to check for steps
+var DEFAULT_ROUNDING_SURFACE_VISIBLILITY_BELOW = 50;
+var DEFAULT_ROUNDING_SURFACE_VISIBLILITY_ABOVE = 100;
+var getInvalidSurfaceVisibilityTill750StepsMessage = function getInvalidSurfaceVisibilityTill750StepsMessage() {
+  var value = arguments.length > 0 && arguments[0] !== undefined ? arguments[0] : DEFAULT_ROUNDING_SURFACE_VISIBLILITY_BELOW;
+  return "A visibility below 750m must be rounded to the nearest ".concat(value, "m");
+};
+var getInvalidSurfaceVisibilityFrom750StepsMessage = function getInvalidSurfaceVisibilityFrom750StepsMessage() {
+  var value = arguments.length > 0 && arguments[0] !== undefined ? arguments[0] : DEFAULT_ROUNDING_SURFACE_VISIBLILITY_ABOVE;
+  return "A visibility above 750m must be rounded to the nearest ".concat(value, "m");
+};
+
+var _validateSurfaceVisibility = function validateSurfaceVisibility(value, productConfig, selectedFIR) {
+  if (isEmpty(value)) return true;
+
+  var _getActiveFIRArea = getActiveFIRArea(selectedFIR, productConfig),
+      _getActiveFIRArea$vis = _getActiveFIRArea.visibility_rounding_below,
+      visibility_rounding_below = _getActiveFIRArea$vis === void 0 ? DEFAULT_ROUNDING_SURFACE_VISIBLILITY_BELOW : _getActiveFIRArea$vis,
+      _getActiveFIRArea$vis2 = _getActiveFIRArea.visibility_rounding_above,
+      visibility_rounding_above = _getActiveFIRArea$vis2 === void 0 ? DEFAULT_ROUNDING_SURFACE_VISIBLILITY_ABOVE : _getActiveFIRArea$vis2; // Parse to integer to check for steps
+
 
   var intVisibility = parseInt(value, 10);
 
   if (intVisibility > 750) {
-    return intVisibility % 100 === 0 || invalidSurfaceVisibilityFrom750StepsMessage;
+    return intVisibility % visibility_rounding_above === 0 || getInvalidSurfaceVisibilityFrom750StepsMessage(visibility_rounding_above);
   }
 
-  return intVisibility % 50 === 0 || invalidSurfaceVisibilityTill750StepsMessage;
+  return intVisibility % visibility_rounding_below === 0 || getInvalidSurfaceVisibilityTill750StepsMessage(visibility_rounding_below);
 };
 
 var SurfaceVisibility = function SurfaceVisibility(_ref) {
@@ -2905,7 +2961,9 @@ var SurfaceVisibility = function SurfaceVisibility(_ref) {
             isValidMax(value, getMaxVisibilityValue(selectedFIR, productConfig)) || "The maximum visibility in meters is ".concat(getMaxVisibilityValue(selectedFIR, productConfig))
           );
         },
-        validateSurfaceVisibility: validateSurfaceVisibility
+        validateSurfaceVisibility: function validateSurfaceVisibility(value) {
+          return _validateSurfaceVisibility(value, productConfig, selectedFIR);
+        }
       }
     },
     disabled: isDisabled,
@@ -4026,6 +4084,9 @@ var fir_areas$1 = {
 			FT: 4900,
 			FL: 650
 		},
+		level_rounding_FL: 100,
+		level_rounding_FT: 5,
+		level_rounding_M: 1,
 		movement_min: {
 			KT: 5,
 			KMH: 10
@@ -4034,6 +4095,8 @@ var fir_areas$1 = {
 			KT: 150,
 			KMH: 99
 		},
+		movement_rounding_kt: 5,
+		movement_rounding_kmh: 10,
 		units: [
 			{
 				unit_type: "level_unit",
@@ -5279,6 +5342,8 @@ var fir_areas$1 = {
 		tc_hours_before_validity: 12,
 		va_max_hours_of_validity: 6,
 		va_hours_before_validity: 12,
+		movement_rounding_kt: 20,
+		movement_rounding_kmh: 30,
 		adjacent_firs: [
 			"EKDK",
 			"EDWW",
@@ -5298,7 +5363,8 @@ var fir_areas$1 = {
 			{
 				unit_type: "movement_unit",
 				allowed_units: [
-					"KT"
+					"KT",
+					"KMH"
 				]
 			}
 		]
@@ -5528,6 +5594,8 @@ var fir_areas = {
 		},
 		visibility_max: 4900,
 		visibility_min: 0,
+		visibility_rounding_below: 50,
+		visibility_rounding_above: 100,
 		level_min: {
 			FT: 100,
 			FL: 50
@@ -5536,6 +5604,9 @@ var fir_areas = {
 			FT: 4900,
 			FL: 100
 		},
+		level_rounding_FL: 100,
+		level_rounding_FT: 5,
+		level_rounding_M: 1,
 		movement_min: {
 			KT: 5,
 			KMH: 10
@@ -5544,6 +5615,8 @@ var fir_areas = {
 			KT: 150,
 			KMH: 99
 		},
+		movement_rounding_kt: 5,
+		movement_rounding_kmh: 10,
 		units: [
 			{
 				unit_type: "level_unit",
@@ -6796,6 +6869,8 @@ var fir_areas = {
 		location_indicator_atsu: "EZZZ",
 		max_hours_of_validity: 4,
 		hours_before_validity: 4,
+		movement_rounding_kt: 5,
+		movement_rounding_kmh: 10,
 		units: [
 			{
 				unit_type: "level_unit",
@@ -6807,7 +6882,8 @@ var fir_areas = {
 			{
 				unit_type: "movement_unit",
 				allowed_units: [
-					"KT"
+					"KT",
+					"KMH"
 				]
 			},
 			{
@@ -6897,6 +6973,12 @@ var properties$3 = {
 	hours_before_validity: {
 		type: "number"
 	},
+	movement_rounding_kt: {
+		type: "number"
+	},
+	movement_rounding_kmh: {
+		type: "number"
+	},
 	level_min: {
 		type: "object",
 		additionalProperties: {
@@ -6909,6 +6991,15 @@ var properties$3 = {
 			type: "number"
 		}
 	},
+	level_rounding_FL: {
+		type: "number"
+	},
+	level_rounding_FT: {
+		type: "number"
+	},
+	level_rounding_M: {
+		type: "number"
+	},
 	movement_min: {
 		type: "object",
 		additionalProperties: {
@@ -7009,22 +7100,12 @@ var properties$2 = {
 					]
 				},
 				properties: {
-					oneOf: [
-						{
-							type: "null"
-						},
-						{
-							type: "object",
-							properties: {
-								selectionType: {
-									type: "string"
-								}
-							},
-							required: [
-								"selectionType"
-							]
+					type: "object",
+					properties: {
+						selectionType: {
+							type: "string"
 						}
-					]
+					}
 				},
 				geometry: {
 					oneOf: [
@@ -7717,6 +7798,12 @@ var properties = {
 							},
 							visibility_min: {
 								type: "number"
+							},
+							visibility_rounding_below: {
+								type: "number"
+							},
+							visibility_rounding_above: {
+								type: "number"
 							}
 						},
 						required: [

package/index.umd.js

@@ -1440,27 +1440,65 @@
       }))));
     };
 
-    var invalidLevelsTill4900FTStepsMessage = 'Levels must be rounded to the nearest 100ft';
-    var invalidLevelsFrom50FLStepsMessage = 'Levels must be rounded to the nearest 5';
+    var DEFAULT_ROUNDING_LEVELS_FL = 100;
+    var DEFAULT_ROUNDING_LEVELS_FT = 5;
+    var DEFAULT_ROUNDING_LEVELS_M = 1;
+    var getLevelInvalidStepsForFLUnitMessage = function getLevelInvalidStepsForFLUnitMessage(value) {
+      if (value === void 0) {
+        value = DEFAULT_ROUNDING_LEVELS_FL;
+      }
+
+      return "Levels must be rounded to the nearest " + value;
+    };
+    var getLevelInvalidStepsForFTUnitMessage = function getLevelInvalidStepsForFTUnitMessage(value) {
+      if (value === void 0) {
+        value = DEFAULT_ROUNDING_LEVELS_FT;
+      }
+
+      return "Levels must be rounded to the nearest " + value + "ft";
+    };
+    var getLevelInvalidStepsForMUnitMessage = function getLevelInvalidStepsForMUnitMessage(value) {
+      if (value === void 0) {
+        value = DEFAULT_ROUNDING_LEVELS_M;
+      }
+
+      return "Levels must be rounded to the nearest " + value + "m";
+    };
+    var invalidUnitMessage$1 = 'Level unit not defined';
 
-    var _validateLevels = function validateLevels(value, unit) {
+    var _validateLevels = function validateLevels(value, unit, productConfig, selectedFIR) {
       if (formFields.isEmpty(value)) {
         return true;
-      } // Parse to integer to check for steps
+      }
+
+      var _a = getActiveFIRArea(selectedFIR, productConfig),
+
+      /* eslint-disable @typescript-eslint/naming-convention */
+      _b = _a.level_rounding_FL,
+
+      /* eslint-disable @typescript-eslint/naming-convention */
+      level_rounding_FL = _b === void 0 ? DEFAULT_ROUNDING_LEVELS_FL : _b,
+          _c = _a.level_rounding_FT,
+          level_rounding_FT = _c === void 0 ? DEFAULT_ROUNDING_LEVELS_FT : _c,
+          _d = _a.level_rounding_M,
+          level_rounding_M = _d === void 0 ? DEFAULT_ROUNDING_LEVELS_M : _d; // Parse to integer to check for steps
 
 
       var intLevel = parseInt(value, 10);
 
       if (exports.LevelUnits[unit] === exports.LevelUnits.FT) {
-        return intLevel % 100 === 0 || invalidLevelsTill4900FTStepsMessage;
+        return intLevel % level_rounding_FT === 0 || getLevelInvalidStepsForFTUnitMessage(level_rounding_FT);
       }
 
       if (exports.LevelUnits[unit] === exports.LevelUnits.FL) {
-        return intLevel % 5 === 0 || invalidLevelsFrom50FLStepsMessage;
-      } // For meters the allowed step is 1, so always valid
+        return intLevel % level_rounding_FL === 0 || getLevelInvalidStepsForFLUnitMessage(level_rounding_FL);
+      }
 
+      if (exports.LevelUnits[unit] === exports.LevelUnits.M) {
+        return intLevel % level_rounding_M === 0 || getLevelInvalidStepsForMUnitMessage(level_rounding_M);
+      }
 
-      return true;
+      return invalidUnitMessage$1;
     };
     var invalidLevelUnitCombinationMessage = 'Invalid unit combination';
 
@@ -1600,7 +1638,7 @@
             },
             validateLevels: function validateLevels(value) {
               // level step depends on the unit
-              return _validateLevels(value, getValues('level.unit'));
+              return _validateLevels(value, getValues('level.unit'), productConfig, selectedFIR);
             }
           }
         },
@@ -1674,7 +1712,7 @@
             },
             validateLevels: function validateLevels(value) {
               // level step depends on the unit
-              return _validateLevels(value, getValues('level.unit'));
+              return _validateLevels(value, getValues('level.unit'), productConfig, selectedFIR);
             }
           }
         },
@@ -1769,7 +1807,7 @@
             },
             validateLevels: function validateLevels(value) {
               // level step depends on the unit
-              return _validateLevels(value, getValues('lowerLevel.unit'));
+              return _validateLevels(value, getValues('lowerLevel.unit'), productConfig, selectedFIR);
             }
           }
         },
@@ -1853,7 +1891,7 @@
             },
             validateLevels: function validateLevels(value) {
               // level step depends on the unit
-              return _validateLevels(value, getValues('level.unit'));
+              return _validateLevels(value, getValues('level.unit'), productConfig, selectedFIR);
             }
           }
         },
@@ -2119,23 +2157,48 @@
      * Copyright 2022 - Koninklijk Nederlands Meteorologisch Instituut (KNMI)
      * Copyright 2022 - Finnish Meteorological Institute (FMI)
      * */
+    var DEFAULT_ROUNDING_MOVEMENT_KT = 5;
+    var DEFAULT_ROUNDING_MOVEMENT_KMH = 10;
+    var getMovementStepValKTMessage = function getMovementStepValKTMessage(value) {
+      if (value === void 0) {
+        value = DEFAULT_ROUNDING_MOVEMENT_KT;
+      }
+
+      return "Speed should be rounded to the nearest " + value + "kt";
+    };
+    var getMovementStepValKMHMessage = function getMovementStepValKMHMessage(value) {
+      if (value === void 0) {
+        value = DEFAULT_ROUNDING_MOVEMENT_KMH;
+      }
+
+      return "Speed should be rounded to the nearest " + value + "kmh";
+    };
     var coordinatesEmptyMessage = 'An end position drawing is required when selecting End position';
-    var movementStepValMessageKT = 'Speed should be rounded to the nearest 5kt';
-    var movementStepValMessageKMH = 'Speed should be rounded to the nearest 10kmh';
     var noIntersectionMessage = 'The end position needs to be (partly) inside the FIR';
     var maximum6PointsMessage = 'The end position drawing allows a maximum of 6 individual points';
 
-    var _validateMovementSteps = function validateMovementSteps(value, unit) {
-      if (formFields.isEmpty(value)) return true; // Parse to integer to check for steps
+    var _validateMovementSteps = function validateMovementSteps(value, unit, productConfig, selectedFIR) {
+      if (formFields.isEmpty(value)) return true;
+
+      var _a = getActiveFIRArea(selectedFIR, productConfig),
+
+      /* eslint-disable @typescript-eslint/naming-convention */
+      _b = _a.movement_rounding_kt,
+
+      /* eslint-disable @typescript-eslint/naming-convention */
+      movement_rounding_kt = _b === void 0 ? DEFAULT_ROUNDING_MOVEMENT_KT : _b,
+          _c = _a.movement_rounding_kmh,
+          movement_rounding_kmh = _c === void 0 ? DEFAULT_ROUNDING_MOVEMENT_KMH : _c; // Parse to integer to check for steps
+
 
       var intLevel = parseInt(value, 10);
 
       if (exports.MovementUnit[unit] === exports.MovementUnit.KT) {
-        return intLevel % 5 === 0 || movementStepValMessageKT;
+        return intLevel % movement_rounding_kt === 0 || getMovementStepValKTMessage(movement_rounding_kt);
       }
 
       if (exports.MovementUnit[unit] === exports.MovementUnit.KMH) {
-        return intLevel % 10 === 0 || movementStepValMessageKMH;
+        return intLevel % movement_rounding_kmh === 0 || getMovementStepValKMHMessage(movement_rounding_kmh);
       }
 
       return 'Invalid unit';
@@ -2290,7 +2353,7 @@
             },
             validateMovementSteps: function validateMovementSteps(value) {
               // movement step depends on the unit
-              return _validateMovementSteps(value, getValues('movementUnit'));
+              return _validateMovementSteps(value, getValues('movementUnit'), productConfig, selectedFIR);
             }
           }
         },
@@ -2757,18 +2820,44 @@
      * Copyright 2021 - Koninklijk Nederlands Meteorologisch Instituut (KNMI)
      * Copyright 2021 - Finnish Meteorological Institute (FMI)
      * */
-    var invalidSurfaceVisibilityTill750StepsMessage = 'A visibility below 750m must be rounded to the nearest 50m';
-    var invalidSurfaceVisibilityFrom750StepsMessage = 'A visibility above 750m must be rounded to the nearest 100m';
-    var validateSurfaceVisibility = function validateSurfaceVisibility(value) {
-      if (formFields.isEmpty(value)) return true; // Parse to integer to check for steps
+    var DEFAULT_ROUNDING_SURFACE_VISIBLILITY_BELOW = 50;
+    var DEFAULT_ROUNDING_SURFACE_VISIBLILITY_ABOVE = 100;
+    var getInvalidSurfaceVisibilityTill750StepsMessage = function getInvalidSurfaceVisibilityTill750StepsMessage(value) {
+      if (value === void 0) {
+        value = DEFAULT_ROUNDING_SURFACE_VISIBLILITY_BELOW;
+      }
+
+      return "A visibility below 750m must be rounded to the nearest " + value + "m";
+    };
+    var getInvalidSurfaceVisibilityFrom750StepsMessage = function getInvalidSurfaceVisibilityFrom750StepsMessage(value) {
+      if (value === void 0) {
+        value = DEFAULT_ROUNDING_SURFACE_VISIBLILITY_ABOVE;
+      }
+
+      return "A visibility above 750m must be rounded to the nearest " + value + "m";
+    };
+
+    var _validateSurfaceVisibility = function validateSurfaceVisibility(value, productConfig, selectedFIR) {
+      if (formFields.isEmpty(value)) return true;
+
+      var _a = getActiveFIRArea(selectedFIR, productConfig),
+
+      /* eslint-disable @typescript-eslint/naming-convention */
+      _b = _a.visibility_rounding_below,
+
+      /* eslint-disable @typescript-eslint/naming-convention */
+      visibility_rounding_below = _b === void 0 ? DEFAULT_ROUNDING_SURFACE_VISIBLILITY_BELOW : _b,
+          _c = _a.visibility_rounding_above,
+          visibility_rounding_above = _c === void 0 ? DEFAULT_ROUNDING_SURFACE_VISIBLILITY_ABOVE : _c; // Parse to integer to check for steps
+
 
       var intVisibility = parseInt(value, 10);
 
       if (intVisibility > 750) {
-        return intVisibility % 100 === 0 || invalidSurfaceVisibilityFrom750StepsMessage;
+        return intVisibility % visibility_rounding_above === 0 || getInvalidSurfaceVisibilityFrom750StepsMessage(visibility_rounding_above);
       }
 
-      return intVisibility % 50 === 0 || invalidSurfaceVisibilityTill750StepsMessage;
+      return intVisibility % visibility_rounding_below === 0 || getInvalidSurfaceVisibilityTill750StepsMessage(visibility_rounding_below);
     };
 
     var SurfaceVisibility = function SurfaceVisibility(_a) {
@@ -2817,7 +2906,9 @@
               // The max level depends on the unit
               return formFields.isValidMax(value, getMaxVisibilityValue(selectedFIR, productConfig)) || "The maximum visibility in meters is " + getMaxVisibilityValue(selectedFIR, productConfig);
             },
-            validateSurfaceVisibility: validateSurfaceVisibility
+            validateSurfaceVisibility: function validateSurfaceVisibility(value) {
+              return _validateSurfaceVisibility(value, productConfig, selectedFIR);
+            }
           }
         },
         disabled: isDisabled,
@@ -3912,6 +4003,9 @@
     			FT: 4900,
     			FL: 650
     		},
+    		level_rounding_FL: 100,
+    		level_rounding_FT: 5,
+    		level_rounding_M: 1,
     		movement_min: {
     			KT: 5,
     			KMH: 10
@@ -3920,6 +4014,8 @@
     			KT: 150,
     			KMH: 99
     		},
+    		movement_rounding_kt: 5,
+    		movement_rounding_kmh: 10,
     		units: [
     			{
     				unit_type: "level_unit",
@@ -5165,6 +5261,8 @@
     		tc_hours_before_validity: 12,
     		va_max_hours_of_validity: 6,
     		va_hours_before_validity: 12,
+    		movement_rounding_kt: 20,
+    		movement_rounding_kmh: 30,
     		adjacent_firs: [
     			"EKDK",
     			"EDWW",
@@ -5184,7 +5282,8 @@
     			{
     				unit_type: "movement_unit",
     				allowed_units: [
-    					"KT"
+    					"KT",
+    					"KMH"
     				]
     			}
     		]
@@ -5414,6 +5513,8 @@
     		},
     		visibility_max: 4900,
     		visibility_min: 0,
+    		visibility_rounding_below: 50,
+    		visibility_rounding_above: 100,
     		level_min: {
     			FT: 100,
     			FL: 50
@@ -5422,6 +5523,9 @@
     			FT: 4900,
     			FL: 100
     		},
+    		level_rounding_FL: 100,
+    		level_rounding_FT: 5,
+    		level_rounding_M: 1,
     		movement_min: {
     			KT: 5,
     			KMH: 10
@@ -5430,6 +5534,8 @@
     			KT: 150,
     			KMH: 99
     		},
+    		movement_rounding_kt: 5,
+    		movement_rounding_kmh: 10,
     		units: [
     			{
     				unit_type: "level_unit",
@@ -6682,6 +6788,8 @@
     		location_indicator_atsu: "EZZZ",
     		max_hours_of_validity: 4,
     		hours_before_validity: 4,
+    		movement_rounding_kt: 5,
+    		movement_rounding_kmh: 10,
     		units: [
     			{
     				unit_type: "level_unit",
@@ -6693,7 +6801,8 @@
     			{
     				unit_type: "movement_unit",
     				allowed_units: [
-    					"KT"
+    					"KT",
+    					"KMH"
     				]
     			},
     			{
@@ -6783,6 +6892,12 @@
     	hours_before_validity: {
     		type: "number"
     	},
+    	movement_rounding_kt: {
+    		type: "number"
+    	},
+    	movement_rounding_kmh: {
+    		type: "number"
+    	},
     	level_min: {
     		type: "object",
     		additionalProperties: {
@@ -6795,6 +6910,15 @@
     			type: "number"
     		}
     	},
+    	level_rounding_FL: {
+    		type: "number"
+    	},
+    	level_rounding_FT: {
+    		type: "number"
+    	},
+    	level_rounding_M: {
+    		type: "number"
+    	},
     	movement_min: {
     		type: "object",
     		additionalProperties: {
@@ -6895,22 +7019,12 @@
     					]
     				},
     				properties: {
-    					oneOf: [
-    						{
-    							type: "null"
-    						},
-    						{
-    							type: "object",
-    							properties: {
-    								selectionType: {
-    									type: "string"
-    								}
-    							},
-    							required: [
-    								"selectionType"
-    							]
+    					type: "object",
+    					properties: {
+    						selectionType: {
+    							type: "string"
     						}
-    					]
+    					}
     				},
     				geometry: {
     					oneOf: [
@@ -7603,6 +7717,12 @@
     							},
     							visibility_min: {
     								type: "number"
+    							},
+    							visibility_rounding_below: {
+    								type: "number"
+    							},
+    							visibility_rounding_above: {
+    								type: "number"
     							}
     						},
     						required: [

package/lib/components/ProductForms/ProductFormFields/Levels.d.ts

@@ -1,8 +1,13 @@
 import React from 'react';
-import { ConfigurableFormFieldProps } from '../../../types';
-export declare const invalidLevelsTill4900FTStepsMessage = "Levels must be rounded to the nearest 100ft";
-export declare const invalidLevelsFrom50FLStepsMessage = "Levels must be rounded to the nearest 5";
-export declare const validateLevels: (value: string, unit: string) => boolean | string;
+import { ConfigurableFormFieldProps, ProductConfig } from '../../../types';
+export declare const DEFAULT_ROUNDING_LEVELS_FL = 100;
+export declare const DEFAULT_ROUNDING_LEVELS_FT = 5;
+export declare const DEFAULT_ROUNDING_LEVELS_M = 1;
+export declare const getLevelInvalidStepsForFLUnitMessage: (value?: number) => string;
+export declare const getLevelInvalidStepsForFTUnitMessage: (value?: number) => string;
+export declare const getLevelInvalidStepsForMUnitMessage: (value?: number) => string;
+export declare const invalidUnitMessage = "Level unit not defined";
+export declare const validateLevels: (value: string, unit: string, productConfig: ProductConfig, selectedFIR: string) => boolean | string;
 export declare const invalidLevelUnitCombinationMessage = "Invalid unit combination";
 export declare const validateLevelUnitCombinations: (levelUnit: string, lowerLevelUnit: string) => boolean | string;
 declare const Levels: React.FC<ConfigurableFormFieldProps>;

package/lib/components/ProductForms/ProductFormFields/Progress.d.ts

@@ -1,11 +1,13 @@
 import React from 'react';
-import { MapDrawMode, StartOrEndDrawing, SetMapDrawModes, MapGeoJSONS, ConfigurableFormFieldProps } from '../../../types';
+import { MapDrawMode, StartOrEndDrawing, SetMapDrawModes, MapGeoJSONS, ConfigurableFormFieldProps, ProductConfig } from '../../../types';
+export declare const DEFAULT_ROUNDING_MOVEMENT_KT = 5;
+export declare const DEFAULT_ROUNDING_MOVEMENT_KMH = 10;
+export declare const getMovementStepValKTMessage: (value?: number) => string;
+export declare const getMovementStepValKMHMessage: (value?: number) => string;
 export declare const coordinatesEmptyMessage = "An end position drawing is required when selecting End position";
-export declare const movementStepValMessageKT = "Speed should be rounded to the nearest 5kt";
-export declare const movementStepValMessageKMH = "Speed should be rounded to the nearest 10kmh";
 export declare const noIntersectionMessage = "The end position needs to be (partly) inside the FIR";
 export declare const maximum6PointsMessage = "The end position drawing allows a maximum of 6 individual points";
-export declare const validateMovementSteps: (value: string, unit: string) => boolean | string;
+export declare const validateMovementSteps: (value: string, unit: string, productConfig: ProductConfig, selectedFIR: string) => boolean | string;
 interface ProgressProps extends ConfigurableFormFieldProps {
     drawMode?: SetMapDrawModes;
     geoJSONs?: MapGeoJSONS;

package/lib/components/ProductForms/ProductFormFields/SurfaceVisibility.d.ts

@@ -1,7 +1,9 @@
 import React from 'react';
-import { ConfigurableFormFieldProps } from '../../../types';
-export declare const invalidSurfaceVisibilityTill750StepsMessage = "A visibility below 750m must be rounded to the nearest 50m";
-export declare const invalidSurfaceVisibilityFrom750StepsMessage = "A visibility above 750m must be rounded to the nearest 100m";
-export declare const validateSurfaceVisibility: (value: string) => boolean | string;
+import { ConfigurableFormFieldProps, ProductConfig } from '../../../types';
+export declare const DEFAULT_ROUNDING_SURFACE_VISIBLILITY_BELOW = 50;
+export declare const DEFAULT_ROUNDING_SURFACE_VISIBLILITY_ABOVE = 100;
+export declare const getInvalidSurfaceVisibilityTill750StepsMessage: (value?: number) => string;
+export declare const getInvalidSurfaceVisibilityFrom750StepsMessage: (value?: number) => string;
+export declare const validateSurfaceVisibility: (value: string, productConfig: ProductConfig, selectedFIR: string) => boolean | string;
 declare const SurfaceVisibility: React.FC<ConfigurableFormFieldProps>;
 export default SurfaceVisibility;

package/lib/types.d.ts

@@ -371,8 +371,13 @@ export declare type FIRArea = {
     hours_before_validity: number;
     level_min?: LevelMinMaxType;
     level_max?: LevelMinMaxType;
+    level_rounding_FL?: number;
+    level_rounding_FT?: number;
+    level_rounding_M?: number;
     movement_min?: MovementMinMaxType;
     movement_max?: MovementMinMaxType;
+    movement_rounding_kt?: number;
+    movement_rounding_kmh?: number;
     units: AllowedUnits[];
 };
 export interface FIRConfigSigmet extends FIRArea {
@@ -395,6 +400,8 @@ export interface FIRConfigAirmet extends FIRArea {
     wind_speed_min?: SurfaceWindMinMaxType;
     visibility_max?: number;
     visibility_min?: number;
+    visibility_rounding_below?: number;
+    visibility_rounding_above?: number;
 }
 declare type SigmetFIRArea = Record<string, FIRConfigSigmet>;
 declare type AirmetFIRArea = Record<string, FIRConfigAirmet>;

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@opengeoweb/sigmet-airmet",
-  "version": "4.14.1",
+  "version": "4.15.0",
   "description": "GeoWeb Sigmet/Airmet library for the opengeoweb project",
   "license": "Apache-2.0",
   "repository": {
@@ -14,26 +14,26 @@
     "react": "^18.2.0",
     "react-redux": "^8.0.4",
     "@mui/material": "^5.10.8",
-    "@opengeoweb/shared": "4.14.1",
-    "@opengeoweb/theme": "4.14.1",
+    "@opengeoweb/shared": "4.15.0",
+    "@opengeoweb/theme": "4.15.0",
     "react-draggable": "^4.4.5",
     "re-resizable": "^6.9.0",
     "@redux-eggs/core": "^2.2.0",
     "lodash": "^4.17.20",
     "axios": "^0.25.0",
     "date-fns": "^2.29.3",
-    "@opengeoweb/core": "4.14.1",
+    "@opengeoweb/core": "4.15.0",
     "moment": "^2.29.0",
-    "@opengeoweb/webmap": "4.14.1",
+    "@opengeoweb/webmap": "4.15.0",
     "throttle-debounce": "^3.0.1",
     "proj4": "^2.6.2",
-    "@opengeoweb/api": "4.14.1",
+    "@opengeoweb/api": "4.15.0",
     "react-intl": "^5.17.5",
     "react-sortablejs": "^6.1.4",
     "sortablejs": "^1.15.0",
     "immer": "^9.0.15",
     "react-window": "^1.8.7",
-    "@opengeoweb/form-fields": "4.14.1",
+    "@opengeoweb/form-fields": "4.15.0",
     "react-hook-form": "^7.41.5",
     "moment-timezone": "^0.5.31",
     "@mui/x-date-pickers": "^5.0.4",