@openfn/language-mssql 3.0.0 → 3.1.1

package/node_modules/@types/node/fs.d.ts

@@ -1,2458 +0,0 @@
-declare module "fs" {
-    import * as stream from "stream";
-    import * as events from "events";
-    import { URL } from "url";
-
-    /**
-     * Valid types for path values in "fs".
-     */
-    type PathLike = string | Buffer | URL;
-
-    type NoParamCallback = (err: NodeJS.ErrnoException | null) => void;
-
-    interface StatsBase<T> {
-        isFile(): boolean;
-        isDirectory(): boolean;
-        isBlockDevice(): boolean;
-        isCharacterDevice(): boolean;
-        isSymbolicLink(): boolean;
-        isFIFO(): boolean;
-        isSocket(): boolean;
-
-        dev: number;
-        ino: number;
-        mode: number;
-        nlink: number;
-        uid: number;
-        gid: number;
-        rdev: number;
-        size: number;
-        blksize: number;
-        blocks: number;
-        atimeMs: number;
-        mtimeMs: number;
-        ctimeMs: number;
-        birthtimeMs: number;
-        atime: Date;
-        mtime: Date;
-        ctime: Date;
-        birthtime: Date;
-    }
-
-    interface Stats extends StatsBase<number> {
-    }
-
-    class Stats {
-    }
-
-    class Dirent {
-        isFile(): boolean;
-        isDirectory(): boolean;
-        isBlockDevice(): boolean;
-        isCharacterDevice(): boolean;
-        isSymbolicLink(): boolean;
-        isFIFO(): boolean;
-        isSocket(): boolean;
-        name: string;
-    }
-
-    /**
-     * A class representing a directory stream.
-     */
-    class Dir {
-        readonly path: string;
-
-        /**
-         * Asynchronously iterates over the directory via `readdir(3)` until all entries have been read.
-         */
-        [Symbol.asyncIterator](): AsyncIterableIterator<Dirent>;
-
-        /**
-         * Asynchronously close the directory's underlying resource handle.
-         * Subsequent reads will result in errors.
-         */
-        close(): Promise<void>;
-        close(cb: NoParamCallback): void;
-
-        /**
-         * Synchronously close the directory's underlying resource handle.
-         * Subsequent reads will result in errors.
-         */
-        closeSync(): void;
-
-        /**
-         * Asynchronously read the next directory entry via `readdir(3)` as an `Dirent`.
-         * After the read is completed, a value is returned that will be resolved with an `Dirent`, or `null` if there are no more directory entries to read.
-         * Directory entries returned by this function are in no particular order as provided by the operating system's underlying directory mechanisms.
-         */
-        read(): Promise<Dirent | null>;
-        read(cb: (err: NodeJS.ErrnoException | null, dirEnt: Dirent | null) => void): void;
-
-        /**
-         * Synchronously read the next directory entry via `readdir(3)` as a `Dirent`.
-         * If there are no more directory entries to read, null will be returned.
-         * Directory entries returned by this function are in no particular order as provided by the operating system's underlying directory mechanisms.
-         */
-        readSync(): Dirent;
-    }
-
-    interface FSWatcher extends events.EventEmitter {
-        close(): void;
-
-        /**
-         * events.EventEmitter
-         *   1. change
-         *   2. error
-         */
-        addListener(event: string, listener: (...args: any[]) => void): this;
-        addListener(event: "change", listener: (eventType: string, filename: string | Buffer) => void): this;
-        addListener(event: "error", listener: (error: Error) => void): this;
-        addListener(event: "close", listener: () => void): this;
-
-        on(event: string, listener: (...args: any[]) => void): this;
-        on(event: "change", listener: (eventType: string, filename: string | Buffer) => void): this;
-        on(event: "error", listener: (error: Error) => void): this;
-        on(event: "close", listener: () => void): this;
-
-        once(event: string, listener: (...args: any[]) => void): this;
-        once(event: "change", listener: (eventType: string, filename: string | Buffer) => void): this;
-        once(event: "error", listener: (error: Error) => void): this;
-        once(event: "close", listener: () => void): this;
-
-        prependListener(event: string, listener: (...args: any[]) => void): this;
-        prependListener(event: "change", listener: (eventType: string, filename: string | Buffer) => void): this;
-        prependListener(event: "error", listener: (error: Error) => void): this;
-        prependListener(event: "close", listener: () => void): this;
-
-        prependOnceListener(event: string, listener: (...args: any[]) => void): this;
-        prependOnceListener(event: "change", listener: (eventType: string, filename: string | Buffer) => void): this;
-        prependOnceListener(event: "error", listener: (error: Error) => void): this;
-        prependOnceListener(event: "close", listener: () => void): this;
-    }
-
-    class ReadStream extends stream.Readable {
-        close(): void;
-        bytesRead: number;
-        path: string | Buffer;
-
-        /**
-         * events.EventEmitter
-         *   1. open
-         *   2. close
-         */
-        addListener(event: string, listener: (...args: any[]) => void): this;
-        addListener(event: "open", listener: (fd: number) => void): this;
-        addListener(event: "close", listener: () => void): this;
-
-        on(event: string, listener: (...args: any[]) => void): this;
-        on(event: "open", listener: (fd: number) => void): this;
-        on(event: "close", listener: () => void): this;
-
-        once(event: string, listener: (...args: any[]) => void): this;
-        once(event: "open", listener: (fd: number) => void): this;
-        once(event: "close", listener: () => void): this;
-
-        prependListener(event: string, listener: (...args: any[]) => void): this;
-        prependListener(event: "open", listener: (fd: number) => void): this;
-        prependListener(event: "close", listener: () => void): this;
-
-        prependOnceListener(event: string, listener: (...args: any[]) => void): this;
-        prependOnceListener(event: "open", listener: (fd: number) => void): this;
-        prependOnceListener(event: "close", listener: () => void): this;
-    }
-
-    class WriteStream extends stream.Writable {
-        close(): void;
-        bytesWritten: number;
-        path: string | Buffer;
-
-        /**
-         * events.EventEmitter
-         *   1. open
-         *   2. close
-         */
-        addListener(event: string, listener: (...args: any[]) => void): this;
-        addListener(event: "open", listener: (fd: number) => void): this;
-        addListener(event: "close", listener: () => void): this;
-
-        on(event: string, listener: (...args: any[]) => void): this;
-        on(event: "open", listener: (fd: number) => void): this;
-        on(event: "close", listener: () => void): this;
-
-        once(event: string, listener: (...args: any[]) => void): this;
-        once(event: "open", listener: (fd: number) => void): this;
-        once(event: "close", listener: () => void): this;
-
-        prependListener(event: string, listener: (...args: any[]) => void): this;
-        prependListener(event: "open", listener: (fd: number) => void): this;
-        prependListener(event: "close", listener: () => void): this;
-
-        prependOnceListener(event: string, listener: (...args: any[]) => void): this;
-        prependOnceListener(event: "open", listener: (fd: number) => void): this;
-        prependOnceListener(event: "close", listener: () => void): this;
-    }
-
-    /**
-     * Asynchronous rename(2) - Change the name or location of a file or directory.
-     * @param oldPath A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     * @param newPath A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     */
-    function rename(oldPath: PathLike, newPath: PathLike, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace rename {
-        /**
-         * Asynchronous rename(2) - Change the name or location of a file or directory.
-         * @param oldPath A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * URL support is _experimental_.
-         * @param newPath A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * URL support is _experimental_.
-         */
-        function __promisify__(oldPath: PathLike, newPath: PathLike): Promise<void>;
-    }
-
-    /**
-     * Synchronous rename(2) - Change the name or location of a file or directory.
-     * @param oldPath A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     * @param newPath A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     */
-    function renameSync(oldPath: PathLike, newPath: PathLike): void;
-
-    /**
-     * Asynchronous truncate(2) - Truncate a file to a specified length.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param len If not specified, defaults to `0`.
-     */
-    function truncate(path: PathLike, len: number | undefined | null, callback: NoParamCallback): void;
-
-    /**
-     * Asynchronous truncate(2) - Truncate a file to a specified length.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     */
-    function truncate(path: PathLike, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace truncate {
-        /**
-         * Asynchronous truncate(2) - Truncate a file to a specified length.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param len If not specified, defaults to `0`.
-         */
-        function __promisify__(path: PathLike, len?: number | null): Promise<void>;
-    }
-
-    /**
-     * Synchronous truncate(2) - Truncate a file to a specified length.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param len If not specified, defaults to `0`.
-     */
-    function truncateSync(path: PathLike, len?: number | null): void;
-
-    /**
-     * Asynchronous ftruncate(2) - Truncate a file to a specified length.
-     * @param fd A file descriptor.
-     * @param len If not specified, defaults to `0`.
-     */
-    function ftruncate(fd: number, len: number | undefined | null, callback: NoParamCallback): void;
-
-    /**
-     * Asynchronous ftruncate(2) - Truncate a file to a specified length.
-     * @param fd A file descriptor.
-     */
-    function ftruncate(fd: number, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace ftruncate {
-        /**
-         * Asynchronous ftruncate(2) - Truncate a file to a specified length.
-         * @param fd A file descriptor.
-         * @param len If not specified, defaults to `0`.
-         */
-        function __promisify__(fd: number, len?: number | null): Promise<void>;
-    }
-
-    /**
-     * Synchronous ftruncate(2) - Truncate a file to a specified length.
-     * @param fd A file descriptor.
-     * @param len If not specified, defaults to `0`.
-     */
-    function ftruncateSync(fd: number, len?: number | null): void;
-
-    /**
-     * Asynchronous chown(2) - Change ownership of a file.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function chown(path: PathLike, uid: number, gid: number, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace chown {
-        /**
-         * Asynchronous chown(2) - Change ownership of a file.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         */
-        function __promisify__(path: PathLike, uid: number, gid: number): Promise<void>;
-    }
-
-    /**
-     * Synchronous chown(2) - Change ownership of a file.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function chownSync(path: PathLike, uid: number, gid: number): void;
-
-    /**
-     * Asynchronous fchown(2) - Change ownership of a file.
-     * @param fd A file descriptor.
-     */
-    function fchown(fd: number, uid: number, gid: number, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace fchown {
-        /**
-         * Asynchronous fchown(2) - Change ownership of a file.
-         * @param fd A file descriptor.
-         */
-        function __promisify__(fd: number, uid: number, gid: number): Promise<void>;
-    }
-
-    /**
-     * Synchronous fchown(2) - Change ownership of a file.
-     * @param fd A file descriptor.
-     */
-    function fchownSync(fd: number, uid: number, gid: number): void;
-
-    /**
-     * Asynchronous lchown(2) - Change ownership of a file. Does not dereference symbolic links.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function lchown(path: PathLike, uid: number, gid: number, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace lchown {
-        /**
-         * Asynchronous lchown(2) - Change ownership of a file. Does not dereference symbolic links.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         */
-        function __promisify__(path: PathLike, uid: number, gid: number): Promise<void>;
-    }
-
-    /**
-     * Synchronous lchown(2) - Change ownership of a file. Does not dereference symbolic links.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function lchownSync(path: PathLike, uid: number, gid: number): void;
-
-    /**
-     * Asynchronous chmod(2) - Change permissions of a file.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param mode A file mode. If a string is passed, it is parsed as an octal integer.
-     */
-    function chmod(path: PathLike, mode: string | number, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace chmod {
-        /**
-         * Asynchronous chmod(2) - Change permissions of a file.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param mode A file mode. If a string is passed, it is parsed as an octal integer.
-         */
-        function __promisify__(path: PathLike, mode: string | number): Promise<void>;
-    }
-
-    /**
-     * Synchronous chmod(2) - Change permissions of a file.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param mode A file mode. If a string is passed, it is parsed as an octal integer.
-     */
-    function chmodSync(path: PathLike, mode: string | number): void;
-
-    /**
-     * Asynchronous fchmod(2) - Change permissions of a file.
-     * @param fd A file descriptor.
-     * @param mode A file mode. If a string is passed, it is parsed as an octal integer.
-     */
-    function fchmod(fd: number, mode: string | number, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace fchmod {
-        /**
-         * Asynchronous fchmod(2) - Change permissions of a file.
-         * @param fd A file descriptor.
-         * @param mode A file mode. If a string is passed, it is parsed as an octal integer.
-         */
-        function __promisify__(fd: number, mode: string | number): Promise<void>;
-    }
-
-    /**
-     * Synchronous fchmod(2) - Change permissions of a file.
-     * @param fd A file descriptor.
-     * @param mode A file mode. If a string is passed, it is parsed as an octal integer.
-     */
-    function fchmodSync(fd: number, mode: string | number): void;
-
-    /**
-     * Asynchronous lchmod(2) - Change permissions of a file. Does not dereference symbolic links.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param mode A file mode. If a string is passed, it is parsed as an octal integer.
-     */
-    function lchmod(path: PathLike, mode: string | number, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace lchmod {
-        /**
-         * Asynchronous lchmod(2) - Change permissions of a file. Does not dereference symbolic links.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param mode A file mode. If a string is passed, it is parsed as an octal integer.
-         */
-        function __promisify__(path: PathLike, mode: string | number): Promise<void>;
-    }
-
-    /**
-     * Synchronous lchmod(2) - Change permissions of a file. Does not dereference symbolic links.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param mode A file mode. If a string is passed, it is parsed as an octal integer.
-     */
-    function lchmodSync(path: PathLike, mode: string | number): void;
-
-    /**
-     * Asynchronous stat(2) - Get file status.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function stat(path: PathLike, callback: (err: NodeJS.ErrnoException | null, stats: Stats) => void): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace stat {
-        /**
-         * Asynchronous stat(2) - Get file status.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         */
-        function __promisify__(path: PathLike): Promise<Stats>;
-    }
-
-    /**
-     * Synchronous stat(2) - Get file status.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function statSync(path: PathLike): Stats;
-
-    /**
-     * Asynchronous fstat(2) - Get file status.
-     * @param fd A file descriptor.
-     */
-    function fstat(fd: number, callback: (err: NodeJS.ErrnoException | null, stats: Stats) => void): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace fstat {
-        /**
-         * Asynchronous fstat(2) - Get file status.
-         * @param fd A file descriptor.
-         */
-        function __promisify__(fd: number): Promise<Stats>;
-    }
-
-    /**
-     * Synchronous fstat(2) - Get file status.
-     * @param fd A file descriptor.
-     */
-    function fstatSync(fd: number): Stats;
-
-    /**
-     * Asynchronous lstat(2) - Get file status. Does not dereference symbolic links.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function lstat(path: PathLike, callback: (err: NodeJS.ErrnoException | null, stats: Stats) => void): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace lstat {
-        /**
-         * Asynchronous lstat(2) - Get file status. Does not dereference symbolic links.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         */
-        function __promisify__(path: PathLike): Promise<Stats>;
-    }
-
-    /**
-     * Synchronous lstat(2) - Get file status. Does not dereference symbolic links.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function lstatSync(path: PathLike): Stats;
-
-    /**
-     * Asynchronous link(2) - Create a new link (also known as a hard link) to an existing file.
-     * @param existingPath A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param newPath A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function link(existingPath: PathLike, newPath: PathLike, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace link {
-        /**
-         * Asynchronous link(2) - Create a new link (also known as a hard link) to an existing file.
-         * @param existingPath A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param newPath A path to a file. If a URL is provided, it must use the `file:` protocol.
-         */
-        function __promisify__(existingPath: PathLike, newPath: PathLike): Promise<void>;
-    }
-
-    /**
-     * Synchronous link(2) - Create a new link (also known as a hard link) to an existing file.
-     * @param existingPath A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param newPath A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function linkSync(existingPath: PathLike, newPath: PathLike): void;
-
-    /**
-     * Asynchronous symlink(2) - Create a new symbolic link to an existing file.
-     * @param target A path to an existing file. If a URL is provided, it must use the `file:` protocol.
-     * @param path A path to the new symlink. If a URL is provided, it must use the `file:` protocol.
-     * @param type May be set to `'dir'`, `'file'`, or `'junction'` (default is `'file'`) and is only available on Windows (ignored on other platforms).
-     * When using `'junction'`, the `target` argument will automatically be normalized to an absolute path.
-     */
-    function symlink(target: PathLike, path: PathLike, type: symlink.Type | undefined | null, callback: NoParamCallback): void;
-
-    /**
-     * Asynchronous symlink(2) - Create a new symbolic link to an existing file.
-     * @param target A path to an existing file. If a URL is provided, it must use the `file:` protocol.
-     * @param path A path to the new symlink. If a URL is provided, it must use the `file:` protocol.
-     */
-    function symlink(target: PathLike, path: PathLike, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace symlink {
-        /**
-         * Asynchronous symlink(2) - Create a new symbolic link to an existing file.
-         * @param target A path to an existing file. If a URL is provided, it must use the `file:` protocol.
-         * @param path A path to the new symlink. If a URL is provided, it must use the `file:` protocol.
-         * @param type May be set to `'dir'`, `'file'`, or `'junction'` (default is `'file'`) and is only available on Windows (ignored on other platforms).
-         * When using `'junction'`, the `target` argument will automatically be normalized to an absolute path.
-         */
-        function __promisify__(target: PathLike, path: PathLike, type?: string | null): Promise<void>;
-
-        type Type = "dir" | "file" | "junction";
-    }
-
-    /**
-     * Synchronous symlink(2) - Create a new symbolic link to an existing file.
-     * @param target A path to an existing file. If a URL is provided, it must use the `file:` protocol.
-     * @param path A path to the new symlink. If a URL is provided, it must use the `file:` protocol.
-     * @param type May be set to `'dir'`, `'file'`, or `'junction'` (default is `'file'`) and is only available on Windows (ignored on other platforms).
-     * When using `'junction'`, the `target` argument will automatically be normalized to an absolute path.
-     */
-    function symlinkSync(target: PathLike, path: PathLike, type?: symlink.Type | null): void;
-
-    /**
-     * Asynchronous readlink(2) - read value of a symbolic link.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function readlink(
-        path: PathLike,
-        options: { encoding?: BufferEncoding | null } | BufferEncoding | undefined | null,
-        callback: (err: NodeJS.ErrnoException | null, linkString: string) => void
-    ): void;
-
-    /**
-     * Asynchronous readlink(2) - read value of a symbolic link.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function readlink(path: PathLike, options: { encoding: "buffer" } | "buffer", callback: (err: NodeJS.ErrnoException | null, linkString: Buffer) => void): void;
-
-    /**
-     * Asynchronous readlink(2) - read value of a symbolic link.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function readlink(path: PathLike, options: { encoding?: string | null } | string | undefined | null, callback: (err: NodeJS.ErrnoException | null, linkString: string | Buffer) => void): void;
-
-    /**
-     * Asynchronous readlink(2) - read value of a symbolic link.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function readlink(path: PathLike, callback: (err: NodeJS.ErrnoException | null, linkString: string) => void): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace readlink {
-        /**
-         * Asynchronous readlink(2) - read value of a symbolic link.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function __promisify__(path: PathLike, options?: { encoding?: BufferEncoding | null } | BufferEncoding | null): Promise<string>;
-
-        /**
-         * Asynchronous readlink(2) - read value of a symbolic link.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function __promisify__(path: PathLike, options: { encoding: "buffer" } | "buffer"): Promise<Buffer>;
-
-        /**
-         * Asynchronous readlink(2) - read value of a symbolic link.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function __promisify__(path: PathLike, options?: { encoding?: string | null } | string | null): Promise<string | Buffer>;
-    }
-
-    /**
-     * Synchronous readlink(2) - read value of a symbolic link.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function readlinkSync(path: PathLike, options?: { encoding?: BufferEncoding | null } | BufferEncoding | null): string;
-
-    /**
-     * Synchronous readlink(2) - read value of a symbolic link.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function readlinkSync(path: PathLike, options: { encoding: "buffer" } | "buffer"): Buffer;
-
-    /**
-     * Synchronous readlink(2) - read value of a symbolic link.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function readlinkSync(path: PathLike, options?: { encoding?: string | null } | string | null): string | Buffer;
-
-    /**
-     * Asynchronous realpath(3) - return the canonicalized absolute pathname.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function realpath(
-        path: PathLike,
-        options: { encoding?: BufferEncoding | null } | BufferEncoding | undefined | null,
-        callback: (err: NodeJS.ErrnoException | null, resolvedPath: string) => void
-    ): void;
-
-    /**
-     * Asynchronous realpath(3) - return the canonicalized absolute pathname.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function realpath(path: PathLike, options: { encoding: "buffer" } | "buffer", callback: (err: NodeJS.ErrnoException | null, resolvedPath: Buffer) => void): void;
-
-    /**
-     * Asynchronous realpath(3) - return the canonicalized absolute pathname.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function realpath(path: PathLike, options: { encoding?: string | null } | string | undefined | null, callback: (err: NodeJS.ErrnoException | null, resolvedPath: string | Buffer) => void): void;
-
-    /**
-     * Asynchronous realpath(3) - return the canonicalized absolute pathname.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function realpath(path: PathLike, callback: (err: NodeJS.ErrnoException | null, resolvedPath: string) => void): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace realpath {
-        /**
-         * Asynchronous realpath(3) - return the canonicalized absolute pathname.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function __promisify__(path: PathLike, options?: { encoding?: BufferEncoding | null } | BufferEncoding | null): Promise<string>;
-
-        /**
-         * Asynchronous realpath(3) - return the canonicalized absolute pathname.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function __promisify__(path: PathLike, options: { encoding: "buffer" } | "buffer"): Promise<Buffer>;
-
-        /**
-         * Asynchronous realpath(3) - return the canonicalized absolute pathname.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function __promisify__(path: PathLike, options?: { encoding?: string | null } | string | null): Promise<string | Buffer>;
-
-        function native(
-            path: PathLike,
-            options: { encoding?: BufferEncoding | null } | BufferEncoding | undefined | null,
-            callback: (err: NodeJS.ErrnoException | null, resolvedPath: string) => void
-        ): void;
-        function native(path: PathLike, options: { encoding: "buffer" } | "buffer", callback: (err: NodeJS.ErrnoException | null, resolvedPath: Buffer) => void): void;
-        function native(path: PathLike, options: { encoding?: string | null } | string | undefined | null, callback: (err: NodeJS.ErrnoException | null, resolvedPath: string | Buffer) => void): void;
-        function native(path: PathLike, callback: (err: NodeJS.ErrnoException | null, resolvedPath: string) => void): void;
-    }
-
-    /**
-     * Synchronous realpath(3) - return the canonicalized absolute pathname.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function realpathSync(path: PathLike, options?: { encoding?: BufferEncoding | null } | BufferEncoding | null): string;
-
-    /**
-     * Synchronous realpath(3) - return the canonicalized absolute pathname.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function realpathSync(path: PathLike, options: { encoding: "buffer" } | "buffer"): Buffer;
-
-    /**
-     * Synchronous realpath(3) - return the canonicalized absolute pathname.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function realpathSync(path: PathLike, options?: { encoding?: string | null } | string | null): string | Buffer;
-
-    namespace realpathSync {
-        function native(path: PathLike, options?: { encoding?: BufferEncoding | null } | BufferEncoding | null): string;
-        function native(path: PathLike, options: { encoding: "buffer" } | "buffer"): Buffer;
-        function native(path: PathLike, options?: { encoding?: string | null } | string | null): string | Buffer;
-    }
-
-    /**
-     * Asynchronous unlink(2) - delete a name and possibly the file it refers to.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function unlink(path: PathLike, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace unlink {
-        /**
-         * Asynchronous unlink(2) - delete a name and possibly the file it refers to.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         */
-        function __promisify__(path: PathLike): Promise<void>;
-    }
-
-    /**
-     * Synchronous unlink(2) - delete a name and possibly the file it refers to.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function unlinkSync(path: PathLike): void;
-
-    interface RmDirOptions {
-        /**
-         * If `true`, perform a recursive directory removal. In
-         * recursive mode, errors are not reported if `path` does not exist, and
-         * operations are retried on failure.
-         * @experimental
-         * @default false
-         */
-        recursive?: boolean;
-    }
-
-    interface RmDirAsyncOptions extends RmDirOptions {
-        /**
-         * The amount of time in milliseconds to wait between retries.
-         * This option is ignored if the `recursive` option is not `true`.
-         * @default 100
-         */
-        retryDelay?: number;
-        /**
-         * If an `EBUSY`, `EMFILE`, `ENFILE`, `ENOTEMPTY`, or
-         * `EPERM` error is encountered, Node.js will retry the operation with a linear
-         * backoff wait of `retryDelay` ms longer on each try. This option represents the
-         * number of retries. This option is ignored if the `recursive` option is not
-         * `true`.
-         * @default 0
-         */
-        maxRetries?: number;
-    }
-
-    /**
-     * Asynchronous rmdir(2) - delete a directory.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function rmdir(path: PathLike, callback: NoParamCallback): void;
-    function rmdir(path: PathLike, options: RmDirAsyncOptions, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace rmdir {
-        /**
-         * Asynchronous rmdir(2) - delete a directory.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         */
-        function __promisify__(path: PathLike, options?: RmDirAsyncOptions): Promise<void>;
-    }
-
-    /**
-     * Synchronous rmdir(2) - delete a directory.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function rmdirSync(path: PathLike, options?: RmDirOptions): void;
-
-    interface MakeDirectoryOptions {
-        /**
-         * Indicates whether parent folders should be created.
-         * @default false
-         */
-        recursive?: boolean;
-        /**
-         * A file mode. If a string is passed, it is parsed as an octal integer. If not specified
-         * @default 0o777.
-         */
-        mode?: number;
-    }
-
-    /**
-     * Asynchronous mkdir(2) - create a directory.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options Either the file mode, or an object optionally specifying the file mode and whether parent folders
-     * should be created. If a string is passed, it is parsed as an octal integer. If not specified, defaults to `0o777`.
-     */
-    function mkdir(path: PathLike, options: number | string | MakeDirectoryOptions | undefined | null, callback: NoParamCallback): void;
-
-    /**
-     * Asynchronous mkdir(2) - create a directory with a mode of `0o777`.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function mkdir(path: PathLike, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace mkdir {
-        /**
-         * Asynchronous mkdir(2) - create a directory.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options Either the file mode, or an object optionally specifying the file mode and whether parent folders
-         * should be created. If a string is passed, it is parsed as an octal integer. If not specified, defaults to `0o777`.
-         */
-        function __promisify__(path: PathLike, options?: number | string | MakeDirectoryOptions | null): Promise<void>;
-    }
-
-    /**
-     * Synchronous mkdir(2) - create a directory.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options Either the file mode, or an object optionally specifying the file mode and whether parent folders
-     * should be created. If a string is passed, it is parsed as an octal integer. If not specified, defaults to `0o777`.
-     */
-    function mkdirSync(path: PathLike, options?: number | string | MakeDirectoryOptions | null): void;
-
-    /**
-     * Asynchronously creates a unique temporary directory.
-     * Generates six random characters to be appended behind a required prefix to create a unique temporary directory.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function mkdtemp(prefix: string, options: { encoding?: BufferEncoding | null } | BufferEncoding | undefined | null, callback: (err: NodeJS.ErrnoException | null, folder: string) => void): void;
-
-    /**
-     * Asynchronously creates a unique temporary directory.
-     * Generates six random characters to be appended behind a required prefix to create a unique temporary directory.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function mkdtemp(prefix: string, options: "buffer" | { encoding: "buffer" }, callback: (err: NodeJS.ErrnoException | null, folder: Buffer) => void): void;
-
-    /**
-     * Asynchronously creates a unique temporary directory.
-     * Generates six random characters to be appended behind a required prefix to create a unique temporary directory.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function mkdtemp(prefix: string, options: { encoding?: string | null } | string | undefined | null, callback: (err: NodeJS.ErrnoException | null, folder: string | Buffer) => void): void;
-
-    /**
-     * Asynchronously creates a unique temporary directory.
-     * Generates six random characters to be appended behind a required prefix to create a unique temporary directory.
-     */
-    function mkdtemp(prefix: string, callback: (err: NodeJS.ErrnoException | null, folder: string) => void): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace mkdtemp {
-        /**
-         * Asynchronously creates a unique temporary directory.
-         * Generates six random characters to be appended behind a required prefix to create a unique temporary directory.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function __promisify__(prefix: string, options?: { encoding?: BufferEncoding | null } | BufferEncoding | null): Promise<string>;
-
-        /**
-         * Asynchronously creates a unique temporary directory.
-         * Generates six random characters to be appended behind a required prefix to create a unique temporary directory.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function __promisify__(prefix: string, options: { encoding: "buffer" } | "buffer"): Promise<Buffer>;
-
-        /**
-         * Asynchronously creates a unique temporary directory.
-         * Generates six random characters to be appended behind a required prefix to create a unique temporary directory.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function __promisify__(prefix: string, options?: { encoding?: string | null } | string | null): Promise<string | Buffer>;
-    }
-
-    /**
-     * Synchronously creates a unique temporary directory.
-     * Generates six random characters to be appended behind a required prefix to create a unique temporary directory.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function mkdtempSync(prefix: string, options?: { encoding?: BufferEncoding | null } | BufferEncoding | null): string;
-
-    /**
-     * Synchronously creates a unique temporary directory.
-     * Generates six random characters to be appended behind a required prefix to create a unique temporary directory.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function mkdtempSync(prefix: string, options: { encoding: "buffer" } | "buffer"): Buffer;
-
-    /**
-     * Synchronously creates a unique temporary directory.
-     * Generates six random characters to be appended behind a required prefix to create a unique temporary directory.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function mkdtempSync(prefix: string, options?: { encoding?: string | null } | string | null): string | Buffer;
-
-    /**
-     * Asynchronous readdir(3) - read a directory.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function readdir(
-        path: PathLike,
-        options: { encoding: BufferEncoding | null; withFileTypes?: false } | BufferEncoding | undefined | null,
-        callback: (err: NodeJS.ErrnoException | null, files: string[]) => void,
-    ): void;
-
-    /**
-     * Asynchronous readdir(3) - read a directory.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function readdir(path: PathLike, options: { encoding: "buffer"; withFileTypes?: false } | "buffer", callback: (err: NodeJS.ErrnoException | null, files: Buffer[]) => void): void;
-
-    /**
-     * Asynchronous readdir(3) - read a directory.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function readdir(
-        path: PathLike,
-        options: { encoding?: string | null; withFileTypes?: false } | string | undefined | null,
-        callback: (err: NodeJS.ErrnoException | null, files: string[] | Buffer[]) => void,
-    ): void;
-
-    /**
-     * Asynchronous readdir(3) - read a directory.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function readdir(path: PathLike, callback: (err: NodeJS.ErrnoException | null, files: string[]) => void): void;
-
-    /**
-     * Asynchronous readdir(3) - read a directory.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options If called with `withFileTypes: true` the result data will be an array of Dirent.
-     */
-    function readdir(path: PathLike, options: { encoding?: string | null; withFileTypes: true }, callback: (err: NodeJS.ErrnoException | null, files: Dirent[]) => void): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace readdir {
-        /**
-         * Asynchronous readdir(3) - read a directory.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function __promisify__(path: PathLike, options?: { encoding: BufferEncoding | null; withFileTypes?: false } | BufferEncoding | null): Promise<string[]>;
-
-        /**
-         * Asynchronous readdir(3) - read a directory.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function __promisify__(path: PathLike, options: "buffer" | { encoding: "buffer"; withFileTypes?: false }): Promise<Buffer[]>;
-
-        /**
-         * Asynchronous readdir(3) - read a directory.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function __promisify__(path: PathLike, options?: { encoding?: string | null; withFileTypes?: false } | string | null): Promise<string[] | Buffer[]>;
-
-        /**
-         * Asynchronous readdir(3) - read a directory.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options If called with `withFileTypes: true` the result data will be an array of Dirent
-         */
-        function __promisify__(path: PathLike, options: { encoding?: string | null; withFileTypes: true }): Promise<Dirent[]>;
-    }
-
-    /**
-     * Synchronous readdir(3) - read a directory.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function readdirSync(path: PathLike, options?: { encoding: BufferEncoding | null; withFileTypes?: false } | BufferEncoding | null): string[];
-
-    /**
-     * Synchronous readdir(3) - read a directory.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function readdirSync(path: PathLike, options: { encoding: "buffer"; withFileTypes?: false } | "buffer"): Buffer[];
-
-    /**
-     * Synchronous readdir(3) - read a directory.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-     */
-    function readdirSync(path: PathLike, options?: { encoding?: string | null; withFileTypes?: false } | string | null): string[] | Buffer[];
-
-    /**
-     * Synchronous readdir(3) - read a directory.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param options If called with `withFileTypes: true` the result data will be an array of Dirent.
-     */
-    function readdirSync(path: PathLike, options: { encoding?: string | null; withFileTypes: true }): Dirent[];
-
-    /**
-     * Asynchronous close(2) - close a file descriptor.
-     * @param fd A file descriptor.
-     */
-    function close(fd: number, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace close {
-        /**
-         * Asynchronous close(2) - close a file descriptor.
-         * @param fd A file descriptor.
-         */
-        function __promisify__(fd: number): Promise<void>;
-    }
-
-    /**
-     * Synchronous close(2) - close a file descriptor.
-     * @param fd A file descriptor.
-     */
-    function closeSync(fd: number): void;
-
-    /**
-     * Asynchronous open(2) - open and possibly create a file.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param mode A file mode. If a string is passed, it is parsed as an octal integer. If not supplied, defaults to `0o666`.
-     */
-    function open(path: PathLike, flags: string | number, mode: string | number | undefined | null, callback: (err: NodeJS.ErrnoException | null, fd: number) => void): void;
-
-    /**
-     * Asynchronous open(2) - open and possibly create a file. If the file is created, its mode will be `0o666`.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     */
-    function open(path: PathLike, flags: string | number, callback: (err: NodeJS.ErrnoException | null, fd: number) => void): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace open {
-        /**
-         * Asynchronous open(2) - open and possibly create a file.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param mode A file mode. If a string is passed, it is parsed as an octal integer. If not supplied, defaults to `0o666`.
-         */
-        function __promisify__(path: PathLike, flags: string | number, mode?: string | number | null): Promise<number>;
-    }
-
-    /**
-     * Synchronous open(2) - open and possibly create a file, returning a file descriptor..
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param mode A file mode. If a string is passed, it is parsed as an octal integer. If not supplied, defaults to `0o666`.
-     */
-    function openSync(path: PathLike, flags: string | number, mode?: string | number | null): number;
-
-    /**
-     * Asynchronously change file timestamps of the file referenced by the supplied path.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param atime The last access time. If a string is provided, it will be coerced to number.
-     * @param mtime The last modified time. If a string is provided, it will be coerced to number.
-     */
-    function utimes(path: PathLike, atime: string | number | Date, mtime: string | number | Date, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace utimes {
-        /**
-         * Asynchronously change file timestamps of the file referenced by the supplied path.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param atime The last access time. If a string is provided, it will be coerced to number.
-         * @param mtime The last modified time. If a string is provided, it will be coerced to number.
-         */
-        function __promisify__(path: PathLike, atime: string | number | Date, mtime: string | number | Date): Promise<void>;
-    }
-
-    /**
-     * Synchronously change file timestamps of the file referenced by the supplied path.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * @param atime The last access time. If a string is provided, it will be coerced to number.
-     * @param mtime The last modified time. If a string is provided, it will be coerced to number.
-     */
-    function utimesSync(path: PathLike, atime: string | number | Date, mtime: string | number | Date): void;
-
-    /**
-     * Asynchronously change file timestamps of the file referenced by the supplied file descriptor.
-     * @param fd A file descriptor.
-     * @param atime The last access time. If a string is provided, it will be coerced to number.
-     * @param mtime The last modified time. If a string is provided, it will be coerced to number.
-     */
-    function futimes(fd: number, atime: string | number | Date, mtime: string | number | Date, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace futimes {
-        /**
-         * Asynchronously change file timestamps of the file referenced by the supplied file descriptor.
-         * @param fd A file descriptor.
-         * @param atime The last access time. If a string is provided, it will be coerced to number.
-         * @param mtime The last modified time. If a string is provided, it will be coerced to number.
-         */
-        function __promisify__(fd: number, atime: string | number | Date, mtime: string | number | Date): Promise<void>;
-    }
-
-    /**
-     * Synchronously change file timestamps of the file referenced by the supplied file descriptor.
-     * @param fd A file descriptor.
-     * @param atime The last access time. If a string is provided, it will be coerced to number.
-     * @param mtime The last modified time. If a string is provided, it will be coerced to number.
-     */
-    function futimesSync(fd: number, atime: string | number | Date, mtime: string | number | Date): void;
-
-    /**
-     * Asynchronous fsync(2) - synchronize a file's in-core state with the underlying storage device.
-     * @param fd A file descriptor.
-     */
-    function fsync(fd: number, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace fsync {
-        /**
-         * Asynchronous fsync(2) - synchronize a file's in-core state with the underlying storage device.
-         * @param fd A file descriptor.
-         */
-        function __promisify__(fd: number): Promise<void>;
-    }
-
-    /**
-     * Synchronous fsync(2) - synchronize a file's in-core state with the underlying storage device.
-     * @param fd A file descriptor.
-     */
-    function fsyncSync(fd: number): void;
-
-    /**
-     * Asynchronously writes `buffer` to the file referenced by the supplied file descriptor.
-     * @param fd A file descriptor.
-     * @param offset The part of the buffer to be written. If not supplied, defaults to `0`.
-     * @param length The number of bytes to write. If not supplied, defaults to `buffer.length - offset`.
-     * @param position The offset from the beginning of the file where this data should be written. If not supplied, defaults to the current position.
-     */
-    function write<TBuffer extends NodeJS.ArrayBufferView>(
-        fd: number,
-        buffer: TBuffer,
-        offset: number | undefined | null,
-        length: number | undefined | null,
-        position: number | undefined | null,
-        callback: (err: NodeJS.ErrnoException | null, written: number, buffer: TBuffer) => void,
-    ): void;
-
-    /**
-     * Asynchronously writes `buffer` to the file referenced by the supplied file descriptor.
-     * @param fd A file descriptor.
-     * @param offset The part of the buffer to be written. If not supplied, defaults to `0`.
-     * @param length The number of bytes to write. If not supplied, defaults to `buffer.length - offset`.
-     */
-    function write<TBuffer extends NodeJS.ArrayBufferView>(
-        fd: number,
-        buffer: TBuffer,
-        offset: number | undefined | null,
-        length: number | undefined | null,
-        callback: (err: NodeJS.ErrnoException | null, written: number, buffer: TBuffer) => void,
-    ): void;
-
-    /**
-     * Asynchronously writes `buffer` to the file referenced by the supplied file descriptor.
-     * @param fd A file descriptor.
-     * @param offset The part of the buffer to be written. If not supplied, defaults to `0`.
-     */
-    function write<TBuffer extends NodeJS.ArrayBufferView>(
-        fd: number,
-        buffer: TBuffer,
-        offset: number | undefined | null,
-        callback: (err: NodeJS.ErrnoException | null, written: number, buffer: TBuffer) => void
-    ): void;
-
-    /**
-     * Asynchronously writes `buffer` to the file referenced by the supplied file descriptor.
-     * @param fd A file descriptor.
-     */
-    function write<TBuffer extends NodeJS.ArrayBufferView>(fd: number, buffer: TBuffer, callback: (err: NodeJS.ErrnoException | null, written: number, buffer: TBuffer) => void): void;
-
-    /**
-     * Asynchronously writes `string` to the file referenced by the supplied file descriptor.
-     * @param fd A file descriptor.
-     * @param string A string to write. If something other than a string is supplied it will be coerced to a string.
-     * @param position The offset from the beginning of the file where this data should be written. If not supplied, defaults to the current position.
-     * @param encoding The expected string encoding.
-     */
-    function write(
-        fd: number,
-        string: any,
-        position: number | undefined | null,
-        encoding: string | undefined | null,
-        callback: (err: NodeJS.ErrnoException | null, written: number, str: string) => void,
-    ): void;
-
-    /**
-     * Asynchronously writes `string` to the file referenced by the supplied file descriptor.
-     * @param fd A file descriptor.
-     * @param string A string to write. If something other than a string is supplied it will be coerced to a string.
-     * @param position The offset from the beginning of the file where this data should be written. If not supplied, defaults to the current position.
-     */
-    function write(fd: number, string: any, position: number | undefined | null, callback: (err: NodeJS.ErrnoException | null, written: number, str: string) => void): void;
-
-    /**
-     * Asynchronously writes `string` to the file referenced by the supplied file descriptor.
-     * @param fd A file descriptor.
-     * @param string A string to write. If something other than a string is supplied it will be coerced to a string.
-     */
-    function write(fd: number, string: any, callback: (err: NodeJS.ErrnoException | null, written: number, str: string) => void): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace write {
-        /**
-         * Asynchronously writes `buffer` to the file referenced by the supplied file descriptor.
-         * @param fd A file descriptor.
-         * @param offset The part of the buffer to be written. If not supplied, defaults to `0`.
-         * @param length The number of bytes to write. If not supplied, defaults to `buffer.length - offset`.
-         * @param position The offset from the beginning of the file where this data should be written. If not supplied, defaults to the current position.
-         */
-        function __promisify__<TBuffer extends NodeJS.ArrayBufferView>(
-            fd: number,
-            buffer?: TBuffer,
-            offset?: number,
-            length?: number,
-            position?: number | null,
-        ): Promise<{ bytesWritten: number, buffer: TBuffer }>;
-
-        /**
-         * Asynchronously writes `string` to the file referenced by the supplied file descriptor.
-         * @param fd A file descriptor.
-         * @param string A string to write. If something other than a string is supplied it will be coerced to a string.
-         * @param position The offset from the beginning of the file where this data should be written. If not supplied, defaults to the current position.
-         * @param encoding The expected string encoding.
-         */
-        function __promisify__(fd: number, string: any, position?: number | null, encoding?: string | null): Promise<{ bytesWritten: number, buffer: string }>;
-    }
-
-    /**
-     * Synchronously writes `buffer` to the file referenced by the supplied file descriptor, returning the number of bytes written.
-     * @param fd A file descriptor.
-     * @param offset The part of the buffer to be written. If not supplied, defaults to `0`.
-     * @param length The number of bytes to write. If not supplied, defaults to `buffer.length - offset`.
-     * @param position The offset from the beginning of the file where this data should be written. If not supplied, defaults to the current position.
-     */
-    function writeSync(fd: number, buffer: NodeJS.ArrayBufferView, offset?: number | null, length?: number | null, position?: number | null): number;
-
-    /**
-     * Synchronously writes `string` to the file referenced by the supplied file descriptor, returning the number of bytes written.
-     * @param fd A file descriptor.
-     * @param string A string to write. If something other than a string is supplied it will be coerced to a string.
-     * @param position The offset from the beginning of the file where this data should be written. If not supplied, defaults to the current position.
-     * @param encoding The expected string encoding.
-     */
-    function writeSync(fd: number, string: any, position?: number | null, encoding?: string | null): number;
-
-    /**
-     * Asynchronously reads data from the file referenced by the supplied file descriptor.
-     * @param fd A file descriptor.
-     * @param buffer The buffer that the data will be written to.
-     * @param offset The offset in the buffer at which to start writing.
-     * @param length The number of bytes to read.
-     * @param position The offset from the beginning of the file from which data should be read. If `null`, data will be read from the current position.
-     */
-    function read<TBuffer extends NodeJS.ArrayBufferView>(
-        fd: number,
-        buffer: TBuffer,
-        offset: number,
-        length: number,
-        position: number | null,
-        callback: (err: NodeJS.ErrnoException | null, bytesRead: number, buffer: TBuffer) => void,
-    ): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace read {
-        /**
-         * @param fd A file descriptor.
-         * @param buffer The buffer that the data will be written to.
-         * @param offset The offset in the buffer at which to start writing.
-         * @param length The number of bytes to read.
-         * @param position The offset from the beginning of the file from which data should be read. If `null`, data will be read from the current position.
-         */
-        function __promisify__<TBuffer extends NodeJS.ArrayBufferView>(
-            fd: number,
-            buffer: TBuffer,
-            offset: number,
-            length: number,
-            position: number | null
-        ): Promise<{ bytesRead: number, buffer: TBuffer }>;
-    }
-
-    /**
-     * Synchronously reads data from the file referenced by the supplied file descriptor, returning the number of bytes read.
-     * @param fd A file descriptor.
-     * @param buffer The buffer that the data will be written to.
-     * @param offset The offset in the buffer at which to start writing.
-     * @param length The number of bytes to read.
-     * @param position The offset from the beginning of the file from which data should be read. If `null`, data will be read from the current position.
-     */
-    function readSync(fd: number, buffer: NodeJS.ArrayBufferView, offset: number, length: number, position: number | null): number;
-
-    /**
-     * Asynchronously reads the entire contents of a file.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-     * @param options An object that may contain an optional flag.
-     * If a flag is not provided, it defaults to `'r'`.
-     */
-    function readFile(path: PathLike | number, options: { encoding?: null; flag?: string; } | undefined | null, callback: (err: NodeJS.ErrnoException | null, data: Buffer) => void): void;
-
-    /**
-     * Asynchronously reads the entire contents of a file.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-     * @param options Either the encoding for the result, or an object that contains the encoding and an optional flag.
-     * If a flag is not provided, it defaults to `'r'`.
-     */
-    function readFile(path: PathLike | number, options: { encoding: string; flag?: string; } | string, callback: (err: NodeJS.ErrnoException | null, data: string) => void): void;
-
-    /**
-     * Asynchronously reads the entire contents of a file.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-     * @param options Either the encoding for the result, or an object that contains the encoding and an optional flag.
-     * If a flag is not provided, it defaults to `'r'`.
-     */
-    function readFile(
-        path: PathLike | number,
-        options: { encoding?: string | null; flag?: string; } | string | undefined | null,
-        callback: (err: NodeJS.ErrnoException | null, data: string | Buffer) => void,
-    ): void;
-
-    /**
-     * Asynchronously reads the entire contents of a file.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-     */
-    function readFile(path: PathLike | number, callback: (err: NodeJS.ErrnoException | null, data: Buffer) => void): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace readFile {
-        /**
-         * Asynchronously reads the entire contents of a file.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-         * @param options An object that may contain an optional flag.
-         * If a flag is not provided, it defaults to `'r'`.
-         */
-        function __promisify__(path: PathLike | number, options?: { encoding?: null; flag?: string; } | null): Promise<Buffer>;
-
-        /**
-         * Asynchronously reads the entire contents of a file.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * URL support is _experimental_.
-         * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-         * @param options Either the encoding for the result, or an object that contains the encoding and an optional flag.
-         * If a flag is not provided, it defaults to `'r'`.
-         */
-        function __promisify__(path: PathLike | number, options: { encoding: string; flag?: string; } | string): Promise<string>;
-
-        /**
-         * Asynchronously reads the entire contents of a file.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * URL support is _experimental_.
-         * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-         * @param options Either the encoding for the result, or an object that contains the encoding and an optional flag.
-         * If a flag is not provided, it defaults to `'r'`.
-         */
-        function __promisify__(path: PathLike | number, options?: { encoding?: string | null; flag?: string; } | string | null): Promise<string | Buffer>;
-    }
-
-    /**
-     * Synchronously reads the entire contents of a file.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-     * @param options An object that may contain an optional flag. If a flag is not provided, it defaults to `'r'`.
-     */
-    function readFileSync(path: PathLike | number, options?: { encoding?: null; flag?: string; } | null): Buffer;
-
-    /**
-     * Synchronously reads the entire contents of a file.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-     * @param options Either the encoding for the result, or an object that contains the encoding and an optional flag.
-     * If a flag is not provided, it defaults to `'r'`.
-     */
-    function readFileSync(path: PathLike | number, options: { encoding: string; flag?: string; } | string): string;
-
-    /**
-     * Synchronously reads the entire contents of a file.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-     * @param options Either the encoding for the result, or an object that contains the encoding and an optional flag.
-     * If a flag is not provided, it defaults to `'r'`.
-     */
-    function readFileSync(path: PathLike | number, options?: { encoding?: string | null; flag?: string; } | string | null): string | Buffer;
-
-    type WriteFileOptions = { encoding?: string | null; mode?: number | string; flag?: string; } | string | null;
-
-    /**
-     * Asynchronously writes data to a file, replacing the file if it already exists.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-     * @param data The data to write. If something other than a Buffer or Uint8Array is provided, the value is coerced to a string.
-     * @param options Either the encoding for the file, or an object optionally specifying the encoding, file mode, and flag.
-     * If `encoding` is not supplied, the default of `'utf8'` is used.
-     * If `mode` is not supplied, the default of `0o666` is used.
-     * If `mode` is a string, it is parsed as an octal integer.
-     * If `flag` is not supplied, the default of `'w'` is used.
-     */
-    function writeFile(path: PathLike | number, data: any, options: WriteFileOptions, callback: NoParamCallback): void;
-
-    /**
-     * Asynchronously writes data to a file, replacing the file if it already exists.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-     * @param data The data to write. If something other than a Buffer or Uint8Array is provided, the value is coerced to a string.
-     */
-    function writeFile(path: PathLike | number, data: any, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace writeFile {
-        /**
-         * Asynchronously writes data to a file, replacing the file if it already exists.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * URL support is _experimental_.
-         * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-         * @param data The data to write. If something other than a Buffer or Uint8Array is provided, the value is coerced to a string.
-         * @param options Either the encoding for the file, or an object optionally specifying the encoding, file mode, and flag.
-         * If `encoding` is not supplied, the default of `'utf8'` is used.
-         * If `mode` is not supplied, the default of `0o666` is used.
-         * If `mode` is a string, it is parsed as an octal integer.
-         * If `flag` is not supplied, the default of `'w'` is used.
-         */
-        function __promisify__(path: PathLike | number, data: any, options?: WriteFileOptions): Promise<void>;
-    }
-
-    /**
-     * Synchronously writes data to a file, replacing the file if it already exists.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-     * @param data The data to write. If something other than a Buffer or Uint8Array is provided, the value is coerced to a string.
-     * @param options Either the encoding for the file, or an object optionally specifying the encoding, file mode, and flag.
-     * If `encoding` is not supplied, the default of `'utf8'` is used.
-     * If `mode` is not supplied, the default of `0o666` is used.
-     * If `mode` is a string, it is parsed as an octal integer.
-     * If `flag` is not supplied, the default of `'w'` is used.
-     */
-    function writeFileSync(path: PathLike | number, data: any, options?: WriteFileOptions): void;
-
-    /**
-     * Asynchronously append data to a file, creating the file if it does not exist.
-     * @param file A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-     * @param data The data to write. If something other than a Buffer or Uint8Array is provided, the value is coerced to a string.
-     * @param options Either the encoding for the file, or an object optionally specifying the encoding, file mode, and flag.
-     * If `encoding` is not supplied, the default of `'utf8'` is used.
-     * If `mode` is not supplied, the default of `0o666` is used.
-     * If `mode` is a string, it is parsed as an octal integer.
-     * If `flag` is not supplied, the default of `'a'` is used.
-     */
-    function appendFile(file: PathLike | number, data: any, options: WriteFileOptions, callback: NoParamCallback): void;
-
-    /**
-     * Asynchronously append data to a file, creating the file if it does not exist.
-     * @param file A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-     * @param data The data to write. If something other than a Buffer or Uint8Array is provided, the value is coerced to a string.
-     */
-    function appendFile(file: PathLike | number, data: any, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace appendFile {
-        /**
-         * Asynchronously append data to a file, creating the file if it does not exist.
-         * @param file A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * URL support is _experimental_.
-         * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-         * @param data The data to write. If something other than a Buffer or Uint8Array is provided, the value is coerced to a string.
-         * @param options Either the encoding for the file, or an object optionally specifying the encoding, file mode, and flag.
-         * If `encoding` is not supplied, the default of `'utf8'` is used.
-         * If `mode` is not supplied, the default of `0o666` is used.
-         * If `mode` is a string, it is parsed as an octal integer.
-         * If `flag` is not supplied, the default of `'a'` is used.
-         */
-        function __promisify__(file: PathLike | number, data: any, options?: WriteFileOptions): Promise<void>;
-    }
-
-    /**
-     * Synchronously append data to a file, creating the file if it does not exist.
-     * @param file A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     * If a file descriptor is provided, the underlying file will _not_ be closed automatically.
-     * @param data The data to write. If something other than a Buffer or Uint8Array is provided, the value is coerced to a string.
-     * @param options Either the encoding for the file, or an object optionally specifying the encoding, file mode, and flag.
-     * If `encoding` is not supplied, the default of `'utf8'` is used.
-     * If `mode` is not supplied, the default of `0o666` is used.
-     * If `mode` is a string, it is parsed as an octal integer.
-     * If `flag` is not supplied, the default of `'a'` is used.
-     */
-    function appendFileSync(file: PathLike | number, data: any, options?: WriteFileOptions): void;
-
-    /**
-     * Watch for changes on `filename`. The callback `listener` will be called each time the file is accessed.
-     */
-    function watchFile(filename: PathLike, options: { persistent?: boolean; interval?: number; } | undefined, listener: (curr: Stats, prev: Stats) => void): void;
-
-    /**
-     * Watch for changes on `filename`. The callback `listener` will be called each time the file is accessed.
-     * @param filename A path to a file or directory. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     */
-    function watchFile(filename: PathLike, listener: (curr: Stats, prev: Stats) => void): void;
-
-    /**
-     * Stop watching for changes on `filename`.
-     * @param filename A path to a file or directory. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     */
-    function unwatchFile(filename: PathLike, listener?: (curr: Stats, prev: Stats) => void): void;
-
-    /**
-     * Watch for changes on `filename`, where `filename` is either a file or a directory, returning an `FSWatcher`.
-     * @param filename A path to a file or directory. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     * @param options Either the encoding for the filename provided to the listener, or an object optionally specifying encoding, persistent, and recursive options.
-     * If `encoding` is not supplied, the default of `'utf8'` is used.
-     * If `persistent` is not supplied, the default of `true` is used.
-     * If `recursive` is not supplied, the default of `false` is used.
-     */
-    function watch(
-        filename: PathLike,
-        options: { encoding?: BufferEncoding | null, persistent?: boolean, recursive?: boolean } | BufferEncoding | undefined | null,
-        listener?: (event: string, filename: string) => void,
-    ): FSWatcher;
-
-    /**
-     * Watch for changes on `filename`, where `filename` is either a file or a directory, returning an `FSWatcher`.
-     * @param filename A path to a file or directory. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     * @param options Either the encoding for the filename provided to the listener, or an object optionally specifying encoding, persistent, and recursive options.
-     * If `encoding` is not supplied, the default of `'utf8'` is used.
-     * If `persistent` is not supplied, the default of `true` is used.
-     * If `recursive` is not supplied, the default of `false` is used.
-     */
-    function watch(filename: PathLike, options: { encoding: "buffer", persistent?: boolean, recursive?: boolean } | "buffer", listener?: (event: string, filename: Buffer) => void): FSWatcher;
-
-    /**
-     * Watch for changes on `filename`, where `filename` is either a file or a directory, returning an `FSWatcher`.
-     * @param filename A path to a file or directory. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     * @param options Either the encoding for the filename provided to the listener, or an object optionally specifying encoding, persistent, and recursive options.
-     * If `encoding` is not supplied, the default of `'utf8'` is used.
-     * If `persistent` is not supplied, the default of `true` is used.
-     * If `recursive` is not supplied, the default of `false` is used.
-     */
-    function watch(
-        filename: PathLike,
-        options: { encoding?: string | null, persistent?: boolean, recursive?: boolean } | string | null,
-        listener?: (event: string, filename: string | Buffer) => void,
-    ): FSWatcher;
-
-    /**
-     * Watch for changes on `filename`, where `filename` is either a file or a directory, returning an `FSWatcher`.
-     * @param filename A path to a file or directory. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     */
-    function watch(filename: PathLike, listener?: (event: string, filename: string) => any): FSWatcher;
-
-    /**
-     * Asynchronously tests whether or not the given path exists by checking with the file system.
-     * @deprecated
-     * @param path A path to a file or directory. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     */
-    function exists(path: PathLike, callback: (exists: boolean) => void): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace exists {
-        /**
-         * @param path A path to a file or directory. If a URL is provided, it must use the `file:` protocol.
-         * URL support is _experimental_.
-         */
-        function __promisify__(path: PathLike): Promise<boolean>;
-    }
-
-    /**
-     * Synchronously tests whether or not the given path exists by checking with the file system.
-     * @param path A path to a file or directory. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     */
-    function existsSync(path: PathLike): boolean;
-
-    namespace constants {
-        // File Access Constants
-
-        /** Constant for fs.access(). File is visible to the calling process. */
-        const F_OK: number;
-
-        /** Constant for fs.access(). File can be read by the calling process. */
-        const R_OK: number;
-
-        /** Constant for fs.access(). File can be written by the calling process. */
-        const W_OK: number;
-
-        /** Constant for fs.access(). File can be executed by the calling process. */
-        const X_OK: number;
-
-        // File Copy Constants
-
-        /** Constant for fs.copyFile. Flag indicating the destination file should not be overwritten if it already exists. */
-        const COPYFILE_EXCL: number;
-
-        /**
-         * Constant for fs.copyFile. copy operation will attempt to create a copy-on-write reflink.
-         * If the underlying platform does not support copy-on-write, then a fallback copy mechanism is used.
-         */
-        const COPYFILE_FICLONE: number;
-
-        /**
-         * Constant for fs.copyFile. Copy operation will attempt to create a copy-on-write reflink.
-         * If the underlying platform does not support copy-on-write, then the operation will fail with an error.
-         */
-        const COPYFILE_FICLONE_FORCE: number;
-
-        // File Open Constants
-
-        /** Constant for fs.open(). Flag indicating to open a file for read-only access. */
-        const O_RDONLY: number;
-
-        /** Constant for fs.open(). Flag indicating to open a file for write-only access. */
-        const O_WRONLY: number;
-
-        /** Constant for fs.open(). Flag indicating to open a file for read-write access. */
-        const O_RDWR: number;
-
-        /** Constant for fs.open(). Flag indicating to create the file if it does not already exist. */
-        const O_CREAT: number;
-
-        /** Constant for fs.open(). Flag indicating that opening a file should fail if the O_CREAT flag is set and the file already exists. */
-        const O_EXCL: number;
-
-        /**
-         * Constant for fs.open(). Flag indicating that if path identifies a terminal device,
-         * opening the path shall not cause that terminal to become the controlling terminal for the process
-         * (if the process does not already have one).
-         */
-        const O_NOCTTY: number;
-
-        /** Constant for fs.open(). Flag indicating that if the file exists and is a regular file, and the file is opened successfully for write access, its length shall be truncated to zero. */
-        const O_TRUNC: number;
-
-        /** Constant for fs.open(). Flag indicating that data will be appended to the end of the file. */
-        const O_APPEND: number;
-
-        /** Constant for fs.open(). Flag indicating that the open should fail if the path is not a directory. */
-        const O_DIRECTORY: number;
-
-        /**
-         * constant for fs.open().
-         * Flag indicating reading accesses to the file system will no longer result in
-         * an update to the atime information associated with the file.
-         * This flag is available on Linux operating systems only.
-         */
-        const O_NOATIME: number;
-
-        /** Constant for fs.open(). Flag indicating that the open should fail if the path is a symbolic link. */
-        const O_NOFOLLOW: number;
-
-        /** Constant for fs.open(). Flag indicating that the file is opened for synchronous I/O. */
-        const O_SYNC: number;
-
-        /** Constant for fs.open(). Flag indicating that the file is opened for synchronous I/O with write operations waiting for data integrity. */
-        const O_DSYNC: number;
-
-        /** Constant for fs.open(). Flag indicating to open the symbolic link itself rather than the resource it is pointing to. */
-        const O_SYMLINK: number;
-
-        /** Constant for fs.open(). When set, an attempt will be made to minimize caching effects of file I/O. */
-        const O_DIRECT: number;
-
-        /** Constant for fs.open(). Flag indicating to open the file in nonblocking mode when possible. */
-        const O_NONBLOCK: number;
-
-        // File Type Constants
-
-        /** Constant for fs.Stats mode property for determining a file's type. Bit mask used to extract the file type code. */
-        const S_IFMT: number;
-
-        /** Constant for fs.Stats mode property for determining a file's type. File type constant for a regular file. */
-        const S_IFREG: number;
-
-        /** Constant for fs.Stats mode property for determining a file's type. File type constant for a directory. */
-        const S_IFDIR: number;
-
-        /** Constant for fs.Stats mode property for determining a file's type. File type constant for a character-oriented device file. */
-        const S_IFCHR: number;
-
-        /** Constant for fs.Stats mode property for determining a file's type. File type constant for a block-oriented device file. */
-        const S_IFBLK: number;
-
-        /** Constant for fs.Stats mode property for determining a file's type. File type constant for a FIFO/pipe. */
-        const S_IFIFO: number;
-
-        /** Constant for fs.Stats mode property for determining a file's type. File type constant for a symbolic link. */
-        const S_IFLNK: number;
-
-        /** Constant for fs.Stats mode property for determining a file's type. File type constant for a socket. */
-        const S_IFSOCK: number;
-
-        // File Mode Constants
-
-        /** Constant for fs.Stats mode property for determining access permissions for a file. File mode indicating readable, writable and executable by owner. */
-        const S_IRWXU: number;
-
-        /** Constant for fs.Stats mode property for determining access permissions for a file. File mode indicating readable by owner. */
-        const S_IRUSR: number;
-
-        /** Constant for fs.Stats mode property for determining access permissions for a file. File mode indicating writable by owner. */
-        const S_IWUSR: number;
-
-        /** Constant for fs.Stats mode property for determining access permissions for a file. File mode indicating executable by owner. */
-        const S_IXUSR: number;
-
-        /** Constant for fs.Stats mode property for determining access permissions for a file. File mode indicating readable, writable and executable by group. */
-        const S_IRWXG: number;
-
-        /** Constant for fs.Stats mode property for determining access permissions for a file. File mode indicating readable by group. */
-        const S_IRGRP: number;
-
-        /** Constant for fs.Stats mode property for determining access permissions for a file. File mode indicating writable by group. */
-        const S_IWGRP: number;
-
-        /** Constant for fs.Stats mode property for determining access permissions for a file. File mode indicating executable by group. */
-        const S_IXGRP: number;
-
-        /** Constant for fs.Stats mode property for determining access permissions for a file. File mode indicating readable, writable and executable by others. */
-        const S_IRWXO: number;
-
-        /** Constant for fs.Stats mode property for determining access permissions for a file. File mode indicating readable by others. */
-        const S_IROTH: number;
-
-        /** Constant for fs.Stats mode property for determining access permissions for a file. File mode indicating writable by others. */
-        const S_IWOTH: number;
-
-        /** Constant for fs.Stats mode property for determining access permissions for a file. File mode indicating executable by others. */
-        const S_IXOTH: number;
-
-        /**
-         * When set, a memory file mapping is used to access the file. This flag
-         * is available on Windows operating systems only. On other operating systems,
-         * this flag is ignored.
-         */
-        const UV_FS_O_FILEMAP: number;
-    }
-
-    /**
-     * Asynchronously tests a user's permissions for the file specified by path.
-     * @param path A path to a file or directory. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     */
-    function access(path: PathLike, mode: number | undefined, callback: NoParamCallback): void;
-
-    /**
-     * Asynchronously tests a user's permissions for the file specified by path.
-     * @param path A path to a file or directory. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     */
-    function access(path: PathLike, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace access {
-        /**
-         * Asynchronously tests a user's permissions for the file specified by path.
-         * @param path A path to a file or directory. If a URL is provided, it must use the `file:` protocol.
-         * URL support is _experimental_.
-         */
-        function __promisify__(path: PathLike, mode?: number): Promise<void>;
-    }
-
-    /**
-     * Synchronously tests a user's permissions for the file specified by path.
-     * @param path A path to a file or directory. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     */
-    function accessSync(path: PathLike, mode?: number): void;
-
-    /**
-     * Returns a new `ReadStream` object.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     */
-    function createReadStream(path: PathLike, options?: string | {
-        flags?: string;
-        encoding?: string;
-        fd?: number;
-        mode?: number;
-        autoClose?: boolean;
-        /**
-         * @default false
-         */
-        emitClose?: boolean;
-        start?: number;
-        end?: number;
-        highWaterMark?: number;
-    }): ReadStream;
-
-    /**
-     * Returns a new `WriteStream` object.
-     * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-     * URL support is _experimental_.
-     */
-    function createWriteStream(path: PathLike, options?: string | {
-        flags?: string;
-        encoding?: string;
-        fd?: number;
-        mode?: number;
-        autoClose?: boolean;
-        emitClose?: boolean;
-        start?: number;
-        highWaterMark?: number;
-    }): WriteStream;
-
-    /**
-     * Asynchronous fdatasync(2) - synchronize a file's in-core state with storage device.
-     * @param fd A file descriptor.
-     */
-    function fdatasync(fd: number, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace fdatasync {
-        /**
-         * Asynchronous fdatasync(2) - synchronize a file's in-core state with storage device.
-         * @param fd A file descriptor.
-         */
-        function __promisify__(fd: number): Promise<void>;
-    }
-
-    /**
-     * Synchronous fdatasync(2) - synchronize a file's in-core state with storage device.
-     * @param fd A file descriptor.
-     */
-    function fdatasyncSync(fd: number): void;
-
-    /**
-     * Asynchronously copies src to dest. By default, dest is overwritten if it already exists.
-     * No arguments other than a possible exception are given to the callback function.
-     * Node.js makes no guarantees about the atomicity of the copy operation.
-     * If an error occurs after the destination file has been opened for writing, Node.js will attempt
-     * to remove the destination.
-     * @param src A path to the source file.
-     * @param dest A path to the destination file.
-     */
-    function copyFile(src: PathLike, dest: PathLike, callback: NoParamCallback): void;
-    /**
-     * Asynchronously copies src to dest. By default, dest is overwritten if it already exists.
-     * No arguments other than a possible exception are given to the callback function.
-     * Node.js makes no guarantees about the atomicity of the copy operation.
-     * If an error occurs after the destination file has been opened for writing, Node.js will attempt
-     * to remove the destination.
-     * @param src A path to the source file.
-     * @param dest A path to the destination file.
-     * @param flags An integer that specifies the behavior of the copy operation. The only supported flag is fs.constants.COPYFILE_EXCL, which causes the copy operation to fail if dest already exists.
-     */
-    function copyFile(src: PathLike, dest: PathLike, flags: number, callback: NoParamCallback): void;
-
-    // NOTE: This namespace provides design-time support for util.promisify. Exported members do not exist at runtime.
-    namespace copyFile {
-        /**
-         * Asynchronously copies src to dest. By default, dest is overwritten if it already exists.
-         * No arguments other than a possible exception are given to the callback function.
-         * Node.js makes no guarantees about the atomicity of the copy operation.
-         * If an error occurs after the destination file has been opened for writing, Node.js will attempt
-         * to remove the destination.
-         * @param src A path to the source file.
-         * @param dest A path to the destination file.
-         * @param flags An optional integer that specifies the behavior of the copy operation.
-         * The only supported flag is fs.constants.COPYFILE_EXCL,
-         * which causes the copy operation to fail if dest already exists.
-         */
-        function __promisify__(src: PathLike, dst: PathLike, flags?: number): Promise<void>;
-    }
-
-    /**
-     * Synchronously copies src to dest. By default, dest is overwritten if it already exists.
-     * Node.js makes no guarantees about the atomicity of the copy operation.
-     * If an error occurs after the destination file has been opened for writing, Node.js will attempt
-     * to remove the destination.
-     * @param src A path to the source file.
-     * @param dest A path to the destination file.
-     * @param flags An optional integer that specifies the behavior of the copy operation.
-     * The only supported flag is fs.constants.COPYFILE_EXCL, which causes the copy operation to fail if dest already exists.
-     */
-    function copyFileSync(src: PathLike, dest: PathLike, flags?: number): void;
-
-    /**
-     * Write an array of ArrayBufferViews to the file specified by fd using writev().
-     * position is the offset from the beginning of the file where this data should be written.
-     * It is unsafe to use fs.writev() multiple times on the same file without waiting for the callback. For this scenario, use fs.createWriteStream().
-     * On Linux, positional writes don't work when the file is opened in append mode.
-     * The kernel ignores the position argument and always appends the data to the end of the file.
-     */
-    function writev(
-        fd: number,
-        buffers: NodeJS.ArrayBufferView[],
-        cb: (err: NodeJS.ErrnoException | null, bytesWritten: number, buffers: NodeJS.ArrayBufferView[]) => void
-    ): void;
-    function writev(
-        fd: number,
-        buffers: NodeJS.ArrayBufferView[],
-        position: number,
-        cb: (err: NodeJS.ErrnoException | null, bytesWritten: number, buffers: NodeJS.ArrayBufferView[]) => void
-    ): void;
-
-    interface WriteVResult {
-        bytesWritten: number;
-        buffers: NodeJS.ArrayBufferView[];
-    }
-
-    namespace writev {
-        function __promisify__(fd: number, buffers: NodeJS.ArrayBufferView[], position?: number): Promise<WriteVResult>;
-    }
-
-    /**
-     * See `writev`.
-     */
-    function writevSync(fd: number, buffers: NodeJS.ArrayBufferView[], position?: number): number;
-
-    interface OpenDirOptions {
-        encoding?: BufferEncoding;
-        /**
-         * Number of directory entries that are buffered
-         * internally when reading from the directory. Higher values lead to better
-         * performance but higher memory usage.
-         * @default 32
-         */
-        bufferSize?: number;
-    }
-
-    function opendirSync(path: string, options?: OpenDirOptions): Dir;
-
-    function opendir(path: string, cb: (err: NodeJS.ErrnoException | null, dir: Dir) => void): void;
-    function opendir(path: string, options: OpenDirOptions, cb: (err: NodeJS.ErrnoException | null, dir: Dir) => void): void;
-
-    namespace opendir {
-        function __promisify__(path: string, options?: OpenDirOptions): Promise<Dir>;
-    }
-
-    namespace promises {
-        interface FileHandle {
-            /**
-             * Gets the file descriptor for this file handle.
-             */
-            readonly fd: number;
-
-            /**
-             * Asynchronously append data to a file, creating the file if it does not exist. The underlying file will _not_ be closed automatically.
-             * The `FileHandle` must have been opened for appending.
-             * @param data The data to write. If something other than a `Buffer` or `Uint8Array` is provided, the value is coerced to a string.
-             * @param options Either the encoding for the file, or an object optionally specifying the encoding, file mode, and flag.
-             * If `encoding` is not supplied, the default of `'utf8'` is used.
-             * If `mode` is not supplied, the default of `0o666` is used.
-             * If `mode` is a string, it is parsed as an octal integer.
-             * If `flag` is not supplied, the default of `'a'` is used.
-             */
-            appendFile(data: any, options?: { encoding?: string | null, mode?: string | number, flag?: string | number } | string | null): Promise<void>;
-
-            /**
-             * Asynchronous fchown(2) - Change ownership of a file.
-             */
-            chown(uid: number, gid: number): Promise<void>;
-
-            /**
-             * Asynchronous fchmod(2) - Change permissions of a file.
-             * @param mode A file mode. If a string is passed, it is parsed as an octal integer.
-             */
-            chmod(mode: string | number): Promise<void>;
-
-            /**
-             * Asynchronous fdatasync(2) - synchronize a file's in-core state with storage device.
-             */
-            datasync(): Promise<void>;
-
-            /**
-             * Asynchronous fsync(2) - synchronize a file's in-core state with the underlying storage device.
-             */
-            sync(): Promise<void>;
-
-            /**
-             * Asynchronously reads data from the file.
-             * The `FileHandle` must have been opened for reading.
-             * @param buffer The buffer that the data will be written to.
-             * @param offset The offset in the buffer at which to start writing.
-             * @param length The number of bytes to read.
-             * @param position The offset from the beginning of the file from which data should be read. If `null`, data will be read from the current position.
-             */
-            read<TBuffer extends Uint8Array>(buffer: TBuffer, offset?: number | null, length?: number | null, position?: number | null): Promise<{ bytesRead: number, buffer: TBuffer }>;
-
-            /**
-             * Asynchronously reads the entire contents of a file. The underlying file will _not_ be closed automatically.
-             * The `FileHandle` must have been opened for reading.
-             * @param options An object that may contain an optional flag.
-             * If a flag is not provided, it defaults to `'r'`.
-             */
-            readFile(options?: { encoding?: null, flag?: string | number } | null): Promise<Buffer>;
-
-            /**
-             * Asynchronously reads the entire contents of a file. The underlying file will _not_ be closed automatically.
-             * The `FileHandle` must have been opened for reading.
-             * @param options An object that may contain an optional flag.
-             * If a flag is not provided, it defaults to `'r'`.
-             */
-            readFile(options: { encoding: BufferEncoding, flag?: string | number } | BufferEncoding): Promise<string>;
-
-            /**
-             * Asynchronously reads the entire contents of a file. The underlying file will _not_ be closed automatically.
-             * The `FileHandle` must have been opened for reading.
-             * @param options An object that may contain an optional flag.
-             * If a flag is not provided, it defaults to `'r'`.
-             */
-            readFile(options?: { encoding?: string | null, flag?: string | number } | string | null): Promise<string | Buffer>;
-
-            /**
-             * Asynchronous fstat(2) - Get file status.
-             */
-            stat(): Promise<Stats>;
-
-            /**
-             * Asynchronous ftruncate(2) - Truncate a file to a specified length.
-             * @param len If not specified, defaults to `0`.
-             */
-            truncate(len?: number): Promise<void>;
-
-            /**
-             * Asynchronously change file timestamps of the file.
-             * @param atime The last access time. If a string is provided, it will be coerced to number.
-             * @param mtime The last modified time. If a string is provided, it will be coerced to number.
-             */
-            utimes(atime: string | number | Date, mtime: string | number | Date): Promise<void>;
-
-            /**
-             * Asynchronously writes `buffer` to the file.
-             * The `FileHandle` must have been opened for writing.
-             * @param buffer The buffer that the data will be written to.
-             * @param offset The part of the buffer to be written. If not supplied, defaults to `0`.
-             * @param length The number of bytes to write. If not supplied, defaults to `buffer.length - offset`.
-             * @param position The offset from the beginning of the file where this data should be written. If not supplied, defaults to the current position.
-             */
-            write<TBuffer extends Uint8Array>(buffer: TBuffer, offset?: number | null, length?: number | null, position?: number | null): Promise<{ bytesWritten: number, buffer: TBuffer }>;
-
-            /**
-             * Asynchronously writes `string` to the file.
-             * The `FileHandle` must have been opened for writing.
-             * It is unsafe to call `write()` multiple times on the same file without waiting for the `Promise`
-             * to be resolved (or rejected). For this scenario, `fs.createWriteStream` is strongly recommended.
-             * @param string A string to write. If something other than a string is supplied it will be coerced to a string.
-             * @param position The offset from the beginning of the file where this data should be written. If not supplied, defaults to the current position.
-             * @param encoding The expected string encoding.
-             */
-            write(data: any, position?: number | null, encoding?: string | null): Promise<{ bytesWritten: number, buffer: string }>;
-
-            /**
-             * Asynchronously writes data to a file, replacing the file if it already exists. The underlying file will _not_ be closed automatically.
-             * The `FileHandle` must have been opened for writing.
-             * It is unsafe to call `writeFile()` multiple times on the same file without waiting for the `Promise` to be resolved (or rejected).
-             * @param data The data to write. If something other than a `Buffer` or `Uint8Array` is provided, the value is coerced to a string.
-             * @param options Either the encoding for the file, or an object optionally specifying the encoding, file mode, and flag.
-             * If `encoding` is not supplied, the default of `'utf8'` is used.
-             * If `mode` is not supplied, the default of `0o666` is used.
-             * If `mode` is a string, it is parsed as an octal integer.
-             * If `flag` is not supplied, the default of `'w'` is used.
-             */
-            writeFile(data: any, options?: { encoding?: string | null, mode?: string | number, flag?: string | number } | string | null): Promise<void>;
-
-            /**
-             * See `fs.writev` promisified version.
-             */
-            writev(buffers: NodeJS.ArrayBufferView[], position?: number): Promise<WriteVResult>;
-
-            /**
-             * Asynchronous close(2) - close a `FileHandle`.
-             */
-            close(): Promise<void>;
-        }
-
-        /**
-         * Asynchronously tests a user's permissions for the file specified by path.
-         * @param path A path to a file or directory. If a URL is provided, it must use the `file:` protocol.
-         * URL support is _experimental_.
-         */
-        function access(path: PathLike, mode?: number): Promise<void>;
-
-        /**
-         * Asynchronously copies `src` to `dest`. By default, `dest` is overwritten if it already exists.
-         * Node.js makes no guarantees about the atomicity of the copy operation.
-         * If an error occurs after the destination file has been opened for writing, Node.js will attempt
-         * to remove the destination.
-         * @param src A path to the source file.
-         * @param dest A path to the destination file.
-         * @param flags An optional integer that specifies the behavior of the copy operation. The only
-         * supported flag is `fs.constants.COPYFILE_EXCL`, which causes the copy operation to fail if
-         * `dest` already exists.
-         */
-        function copyFile(src: PathLike, dest: PathLike, flags?: number): Promise<void>;
-
-        /**
-         * Asynchronous open(2) - open and possibly create a file.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param mode A file mode. If a string is passed, it is parsed as an octal integer. If not
-         * supplied, defaults to `0o666`.
-         */
-        function open(path: PathLike, flags: string | number, mode?: string | number): Promise<FileHandle>;
-
-        /**
-         * Asynchronously reads data from the file referenced by the supplied `FileHandle`.
-         * @param handle A `FileHandle`.
-         * @param buffer The buffer that the data will be written to.
-         * @param offset The offset in the buffer at which to start writing.
-         * @param length The number of bytes to read.
-         * @param position The offset from the beginning of the file from which data should be read. If
-         * `null`, data will be read from the current position.
-         */
-        function read<TBuffer extends Uint8Array>(
-            handle: FileHandle,
-            buffer: TBuffer,
-            offset?: number | null,
-            length?: number | null,
-            position?: number | null,
-        ): Promise<{ bytesRead: number, buffer: TBuffer }>;
-
-        /**
-         * Asynchronously writes `buffer` to the file referenced by the supplied `FileHandle`.
-         * It is unsafe to call `fsPromises.write()` multiple times on the same file without waiting for the `Promise`
-         * to be resolved (or rejected). For this scenario, `fs.createWriteStream` is strongly recommended.
-         * @param handle A `FileHandle`.
-         * @param buffer The buffer that the data will be written to.
-         * @param offset The part of the buffer to be written. If not supplied, defaults to `0`.
-         * @param length The number of bytes to write. If not supplied, defaults to `buffer.length - offset`.
-         * @param position The offset from the beginning of the file where this data should be written. If not supplied, defaults to the current position.
-         */
-        function write<TBuffer extends Uint8Array>(
-            handle: FileHandle,
-            buffer: TBuffer,
-            offset?: number | null,
-            length?: number | null, position?: number | null): Promise<{ bytesWritten: number, buffer: TBuffer }>;
-
-        /**
-         * Asynchronously writes `string` to the file referenced by the supplied `FileHandle`.
-         * It is unsafe to call `fsPromises.write()` multiple times on the same file without waiting for the `Promise`
-         * to be resolved (or rejected). For this scenario, `fs.createWriteStream` is strongly recommended.
-         * @param handle A `FileHandle`.
-         * @param string A string to write. If something other than a string is supplied it will be coerced to a string.
-         * @param position The offset from the beginning of the file where this data should be written. If not supplied, defaults to the current position.
-         * @param encoding The expected string encoding.
-         */
-        function write(handle: FileHandle, string: any, position?: number | null, encoding?: string | null): Promise<{ bytesWritten: number, buffer: string }>;
-
-        /**
-         * Asynchronous rename(2) - Change the name or location of a file or directory.
-         * @param oldPath A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * URL support is _experimental_.
-         * @param newPath A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * URL support is _experimental_.
-         */
-        function rename(oldPath: PathLike, newPath: PathLike): Promise<void>;
-
-        /**
-         * Asynchronous truncate(2) - Truncate a file to a specified length.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param len If not specified, defaults to `0`.
-         */
-        function truncate(path: PathLike, len?: number): Promise<void>;
-
-        /**
-         * Asynchronous ftruncate(2) - Truncate a file to a specified length.
-         * @param handle A `FileHandle`.
-         * @param len If not specified, defaults to `0`.
-         */
-        function ftruncate(handle: FileHandle, len?: number): Promise<void>;
-
-        /**
-         * Asynchronous rmdir(2) - delete a directory.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         */
-        function rmdir(path: PathLike, options?: RmDirAsyncOptions): Promise<void>;
-
-        /**
-         * Asynchronous fdatasync(2) - synchronize a file's in-core state with storage device.
-         * @param handle A `FileHandle`.
-         */
-        function fdatasync(handle: FileHandle): Promise<void>;
-
-        /**
-         * Asynchronous fsync(2) - synchronize a file's in-core state with the underlying storage device.
-         * @param handle A `FileHandle`.
-         */
-        function fsync(handle: FileHandle): Promise<void>;
-
-        /**
-         * Asynchronous mkdir(2) - create a directory.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options Either the file mode, or an object optionally specifying the file mode and whether parent folders
-         * should be created. If a string is passed, it is parsed as an octal integer. If not specified, defaults to `0o777`.
-         */
-        function mkdir(path: PathLike, options?: number | string | MakeDirectoryOptions | null): Promise<void>;
-
-        /**
-         * Asynchronous readdir(3) - read a directory.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function readdir(path: PathLike, options?: { encoding?: BufferEncoding | null; withFileTypes?: false } | BufferEncoding | null): Promise<string[]>;
-
-        /**
-         * Asynchronous readdir(3) - read a directory.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function readdir(path: PathLike, options: { encoding: "buffer"; withFileTypes?: false } | "buffer"): Promise<Buffer[]>;
-
-        /**
-         * Asynchronous readdir(3) - read a directory.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function readdir(path: PathLike, options?: { encoding?: string | null; withFileTypes?: false } | string | null): Promise<string[] | Buffer[]>;
-
-        /**
-         * Asynchronous readdir(3) - read a directory.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options If called with `withFileTypes: true` the result data will be an array of Dirent.
-         */
-        function readdir(path: PathLike, options: { encoding?: string | null; withFileTypes: true }): Promise<Dirent[]>;
-
-        /**
-         * Asynchronous readlink(2) - read value of a symbolic link.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function readlink(path: PathLike, options?: { encoding?: BufferEncoding | null } | BufferEncoding | null): Promise<string>;
-
-        /**
-         * Asynchronous readlink(2) - read value of a symbolic link.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function readlink(path: PathLike, options: { encoding: "buffer" } | "buffer"): Promise<Buffer>;
-
-        /**
-         * Asynchronous readlink(2) - read value of a symbolic link.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function readlink(path: PathLike, options?: { encoding?: string | null } | string | null): Promise<string | Buffer>;
-
-        /**
-         * Asynchronous symlink(2) - Create a new symbolic link to an existing file.
-         * @param target A path to an existing file. If a URL is provided, it must use the `file:` protocol.
-         * @param path A path to the new symlink. If a URL is provided, it must use the `file:` protocol.
-         * @param type May be set to `'dir'`, `'file'`, or `'junction'` (default is `'file'`) and is only available on Windows (ignored on other platforms).
-         * When using `'junction'`, the `target` argument will automatically be normalized to an absolute path.
-         */
-        function symlink(target: PathLike, path: PathLike, type?: string | null): Promise<void>;
-
-        /**
-         * Asynchronous fstat(2) - Get file status.
-         * @param handle A `FileHandle`.
-         */
-        function fstat(handle: FileHandle): Promise<Stats>;
-
-        /**
-         * Asynchronous lstat(2) - Get file status. Does not dereference symbolic links.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         */
-        function lstat(path: PathLike): Promise<Stats>;
-
-        /**
-         * Asynchronous stat(2) - Get file status.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         */
-        function stat(path: PathLike): Promise<Stats>;
-
-        /**
-         * Asynchronous link(2) - Create a new link (also known as a hard link) to an existing file.
-         * @param existingPath A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param newPath A path to a file. If a URL is provided, it must use the `file:` protocol.
-         */
-        function link(existingPath: PathLike, newPath: PathLike): Promise<void>;
-
-        /**
-         * Asynchronous unlink(2) - delete a name and possibly the file it refers to.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         */
-        function unlink(path: PathLike): Promise<void>;
-
-        /**
-         * Asynchronous fchmod(2) - Change permissions of a file.
-         * @param handle A `FileHandle`.
-         * @param mode A file mode. If a string is passed, it is parsed as an octal integer.
-         */
-        function fchmod(handle: FileHandle, mode: string | number): Promise<void>;
-
-        /**
-         * Asynchronous chmod(2) - Change permissions of a file.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param mode A file mode. If a string is passed, it is parsed as an octal integer.
-         */
-        function chmod(path: PathLike, mode: string | number): Promise<void>;
-
-        /**
-         * Asynchronous lchmod(2) - Change permissions of a file. Does not dereference symbolic links.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param mode A file mode. If a string is passed, it is parsed as an octal integer.
-         */
-        function lchmod(path: PathLike, mode: string | number): Promise<void>;
-
-        /**
-         * Asynchronous lchown(2) - Change ownership of a file. Does not dereference symbolic links.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         */
-        function lchown(path: PathLike, uid: number, gid: number): Promise<void>;
-
-        /**
-         * Asynchronous fchown(2) - Change ownership of a file.
-         * @param handle A `FileHandle`.
-         */
-        function fchown(handle: FileHandle, uid: number, gid: number): Promise<void>;
-
-        /**
-         * Asynchronous chown(2) - Change ownership of a file.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         */
-        function chown(path: PathLike, uid: number, gid: number): Promise<void>;
-
-        /**
-         * Asynchronously change file timestamps of the file referenced by the supplied path.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param atime The last access time. If a string is provided, it will be coerced to number.
-         * @param mtime The last modified time. If a string is provided, it will be coerced to number.
-         */
-        function utimes(path: PathLike, atime: string | number | Date, mtime: string | number | Date): Promise<void>;
-
-        /**
-         * Asynchronously change file timestamps of the file referenced by the supplied `FileHandle`.
-         * @param handle A `FileHandle`.
-         * @param atime The last access time. If a string is provided, it will be coerced to number.
-         * @param mtime The last modified time. If a string is provided, it will be coerced to number.
-         */
-        function futimes(handle: FileHandle, atime: string | number | Date, mtime: string | number | Date): Promise<void>;
-
-        /**
-         * Asynchronous realpath(3) - return the canonicalized absolute pathname.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function realpath(path: PathLike, options?: { encoding?: BufferEncoding | null } | BufferEncoding | null): Promise<string>;
-
-        /**
-         * Asynchronous realpath(3) - return the canonicalized absolute pathname.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function realpath(path: PathLike, options: { encoding: "buffer" } | "buffer"): Promise<Buffer>;
-
-        /**
-         * Asynchronous realpath(3) - return the canonicalized absolute pathname.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function realpath(path: PathLike, options?: { encoding?: string | null } | string | null): Promise<string | Buffer>;
-
-        /**
-         * Asynchronously creates a unique temporary directory.
-         * Generates six random characters to be appended behind a required `prefix` to create a unique temporary directory.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function mkdtemp(prefix: string, options?: { encoding?: BufferEncoding | null } | BufferEncoding | null): Promise<string>;
-
-        /**
-         * Asynchronously creates a unique temporary directory.
-         * Generates six random characters to be appended behind a required `prefix` to create a unique temporary directory.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function mkdtemp(prefix: string, options: { encoding: "buffer" } | "buffer"): Promise<Buffer>;
-
-        /**
-         * Asynchronously creates a unique temporary directory.
-         * Generates six random characters to be appended behind a required `prefix` to create a unique temporary directory.
-         * @param options The encoding (or an object specifying the encoding), used as the encoding of the result. If not provided, `'utf8'` is used.
-         */
-        function mkdtemp(prefix: string, options?: { encoding?: string | null } | string | null): Promise<string | Buffer>;
-
-        /**
-         * Asynchronously writes data to a file, replacing the file if it already exists.
-         * It is unsafe to call `fsPromises.writeFile()` multiple times on the same file without waiting for the `Promise` to be resolved (or rejected).
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * URL support is _experimental_.
-         * If a `FileHandle` is provided, the underlying file will _not_ be closed automatically.
-         * @param data The data to write. If something other than a `Buffer` or `Uint8Array` is provided, the value is coerced to a string.
-         * @param options Either the encoding for the file, or an object optionally specifying the encoding, file mode, and flag.
-         * If `encoding` is not supplied, the default of `'utf8'` is used.
-         * If `mode` is not supplied, the default of `0o666` is used.
-         * If `mode` is a string, it is parsed as an octal integer.
-         * If `flag` is not supplied, the default of `'w'` is used.
-         */
-        function writeFile(path: PathLike | FileHandle, data: any, options?: { encoding?: string | null, mode?: string | number, flag?: string | number } | string | null): Promise<void>;
-
-        /**
-         * Asynchronously append data to a file, creating the file if it does not exist.
-         * @param file A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * URL support is _experimental_.
-         * If a `FileHandle` is provided, the underlying file will _not_ be closed automatically.
-         * @param data The data to write. If something other than a `Buffer` or `Uint8Array` is provided, the value is coerced to a string.
-         * @param options Either the encoding for the file, or an object optionally specifying the encoding, file mode, and flag.
-         * If `encoding` is not supplied, the default of `'utf8'` is used.
-         * If `mode` is not supplied, the default of `0o666` is used.
-         * If `mode` is a string, it is parsed as an octal integer.
-         * If `flag` is not supplied, the default of `'a'` is used.
-         */
-        function appendFile(path: PathLike | FileHandle, data: any, options?: { encoding?: string | null, mode?: string | number, flag?: string | number } | string | null): Promise<void>;
-
-        /**
-         * Asynchronously reads the entire contents of a file.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * If a `FileHandle` is provided, the underlying file will _not_ be closed automatically.
-         * @param options An object that may contain an optional flag.
-         * If a flag is not provided, it defaults to `'r'`.
-         */
-        function readFile(path: PathLike | FileHandle, options?: { encoding?: null, flag?: string | number } | null): Promise<Buffer>;
-
-        /**
-         * Asynchronously reads the entire contents of a file.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * If a `FileHandle` is provided, the underlying file will _not_ be closed automatically.
-         * @param options An object that may contain an optional flag.
-         * If a flag is not provided, it defaults to `'r'`.
-         */
-        function readFile(path: PathLike | FileHandle, options: { encoding: BufferEncoding, flag?: string | number } | BufferEncoding): Promise<string>;
-
-        /**
-         * Asynchronously reads the entire contents of a file.
-         * @param path A path to a file. If a URL is provided, it must use the `file:` protocol.
-         * If a `FileHandle` is provided, the underlying file will _not_ be closed automatically.
-         * @param options An object that may contain an optional flag.
-         * If a flag is not provided, it defaults to `'r'`.
-         */
-        function readFile(path: PathLike | FileHandle, options?: { encoding?: string | null, flag?: string | number } | string | null): Promise<string | Buffer>;
-
-        function opendir(path: string, options?: OpenDirOptions): Promise<Dir>;
-    }
-}