@openclaw/google-meet 2026.7.2-beta.7 → 2026.7.33

package/node_modules/jszip/node_modules/pako/lib/zlib/README

@@ -1,59 +0,0 @@
-Content of this folder follows zlib C sources as close as possible.
-That's intended to simplify maintainability and guarantee equal API
-and result.
-
-Key differences:
-
-- Everything is in JavaScript.
-- No platform-dependent blocks.
-- Some things like crc32 rewritten to keep size small and make JIT
-  work better.
-- Some code is different due missed features in JS (macros, pointers,
-  structures, header files)
-- Specific API methods are not implemented (see notes in root readme)
-
-This port is based on zlib 1.2.8.
-
-This port is under zlib license (see below) with contribution and addition of javascript
-port under expat license (see LICENSE at root of project)
-
-Copyright:
-(C) 1995-2013 Jean-loup Gailly and Mark Adler
-(C) 2014-2017 Vitaly Puzrin and Andrey Tupitsin
-
-
-From zlib's README
-=============================================================================
-
-Acknowledgments:
-
-  The deflate format used by zlib was defined by Phil Katz.  The deflate and
-  zlib specifications were written by L.  Peter Deutsch.  Thanks to all the
-  people who reported problems and suggested various improvements in zlib; they
-  are too numerous to cite here.
-
-Copyright notice:
-
- (C) 1995-2013 Jean-loup Gailly and Mark Adler
-
-Copyright (c) <''year''> <''copyright holders''>
-
-This software is provided 'as-is', without any express or implied
-warranty. In no event will the authors be held liable for any damages
-arising from the use of this software.
-
-Permission is granted to anyone to use this software for any purpose,
-including commercial applications, and to alter it and redistribute it
-freely, subject to the following restrictions:
-
-1. The origin of this software must not be misrepresented; you must not
-   claim that you wrote the original software. If you use this software
-   in a product, an acknowledgment in the product documentation would be
-   appreciated but is not required.
-2. Altered source versions must be plainly marked as such, and must not be
-   misrepresented as being the original software.
-3. This notice may not be removed or altered from any source distribution.
-
-
-  Jean-loup Gailly        Mark Adler
-  jloup@gzip.org          madler@alumni.caltech.edu

package/node_modules/jszip/node_modules/pako/lib/zlib/adler32.js

@@ -1,51 +0,0 @@
-'use strict';
-
-// Note: adler32 takes 12% for level 0 and 2% for level 6.
-// It isn't worth it to make additional optimizations as in original.
-// Small size is preferable.
-
-// (C) 1995-2013 Jean-loup Gailly and Mark Adler
-// (C) 2014-2017 Vitaly Puzrin and Andrey Tupitsin
-//
-// This software is provided 'as-is', without any express or implied
-// warranty. In no event will the authors be held liable for any damages
-// arising from the use of this software.
-//
-// Permission is granted to anyone to use this software for any purpose,
-// including commercial applications, and to alter it and redistribute it
-// freely, subject to the following restrictions:
-//
-// 1. The origin of this software must not be misrepresented; you must not
-//   claim that you wrote the original software. If you use this software
-//   in a product, an acknowledgment in the product documentation would be
-//   appreciated but is not required.
-// 2. Altered source versions must be plainly marked as such, and must not be
-//   misrepresented as being the original software.
-// 3. This notice may not be removed or altered from any source distribution.
-
-function adler32(adler, buf, len, pos) {
-  var s1 = (adler & 0xffff) |0,
-      s2 = ((adler >>> 16) & 0xffff) |0,
-      n = 0;
-
-  while (len !== 0) {
-    // Set limit ~ twice less than 5552, to keep
-    // s2 in 31-bits, because we force signed ints.
-    // in other case %= will fail.
-    n = len > 2000 ? 2000 : len;
-    len -= n;
-
-    do {
-      s1 = (s1 + buf[pos++]) |0;
-      s2 = (s2 + s1) |0;
-    } while (--n);
-
-    s1 %= 65521;
-    s2 %= 65521;
-  }
-
-  return (s1 | (s2 << 16)) |0;
-}
-
-
-module.exports = adler32;

package/node_modules/jszip/node_modules/pako/lib/zlib/constants.js

@@ -1,68 +0,0 @@
-'use strict';
-
-// (C) 1995-2013 Jean-loup Gailly and Mark Adler
-// (C) 2014-2017 Vitaly Puzrin and Andrey Tupitsin
-//
-// This software is provided 'as-is', without any express or implied
-// warranty. In no event will the authors be held liable for any damages
-// arising from the use of this software.
-//
-// Permission is granted to anyone to use this software for any purpose,
-// including commercial applications, and to alter it and redistribute it
-// freely, subject to the following restrictions:
-//
-// 1. The origin of this software must not be misrepresented; you must not
-//   claim that you wrote the original software. If you use this software
-//   in a product, an acknowledgment in the product documentation would be
-//   appreciated but is not required.
-// 2. Altered source versions must be plainly marked as such, and must not be
-//   misrepresented as being the original software.
-// 3. This notice may not be removed or altered from any source distribution.
-
-module.exports = {
-
-  /* Allowed flush values; see deflate() and inflate() below for details */
-  Z_NO_FLUSH:         0,
-  Z_PARTIAL_FLUSH:    1,
-  Z_SYNC_FLUSH:       2,
-  Z_FULL_FLUSH:       3,
-  Z_FINISH:           4,
-  Z_BLOCK:            5,
-  Z_TREES:            6,
-
-  /* Return codes for the compression/decompression functions. Negative values
-  * are errors, positive values are used for special but normal events.
-  */
-  Z_OK:               0,
-  Z_STREAM_END:       1,
-  Z_NEED_DICT:        2,
-  Z_ERRNO:           -1,
-  Z_STREAM_ERROR:    -2,
-  Z_DATA_ERROR:      -3,
-  //Z_MEM_ERROR:     -4,
-  Z_BUF_ERROR:       -5,
-  //Z_VERSION_ERROR: -6,
-
-  /* compression levels */
-  Z_NO_COMPRESSION:         0,
-  Z_BEST_SPEED:             1,
-  Z_BEST_COMPRESSION:       9,
-  Z_DEFAULT_COMPRESSION:   -1,
-
-
-  Z_FILTERED:               1,
-  Z_HUFFMAN_ONLY:           2,
-  Z_RLE:                    3,
-  Z_FIXED:                  4,
-  Z_DEFAULT_STRATEGY:       0,
-
-  /* Possible values of the data_type field (though see inflate()) */
-  Z_BINARY:                 0,
-  Z_TEXT:                   1,
-  //Z_ASCII:                1, // = Z_TEXT (deprecated)
-  Z_UNKNOWN:                2,
-
-  /* The deflate compression method */
-  Z_DEFLATED:               8
-  //Z_NULL:                 null // Use -1 or null inline, depending on var type
-};

package/node_modules/jszip/node_modules/pako/lib/zlib/crc32.js

@@ -1,59 +0,0 @@
-'use strict';
-
-// Note: we can't get significant speed boost here.
-// So write code to minimize size - no pregenerated tables
-// and array tools dependencies.
-
-// (C) 1995-2013 Jean-loup Gailly and Mark Adler
-// (C) 2014-2017 Vitaly Puzrin and Andrey Tupitsin
-//
-// This software is provided 'as-is', without any express or implied
-// warranty. In no event will the authors be held liable for any damages
-// arising from the use of this software.
-//
-// Permission is granted to anyone to use this software for any purpose,
-// including commercial applications, and to alter it and redistribute it
-// freely, subject to the following restrictions:
-//
-// 1. The origin of this software must not be misrepresented; you must not
-//   claim that you wrote the original software. If you use this software
-//   in a product, an acknowledgment in the product documentation would be
-//   appreciated but is not required.
-// 2. Altered source versions must be plainly marked as such, and must not be
-//   misrepresented as being the original software.
-// 3. This notice may not be removed or altered from any source distribution.
-
-// Use ordinary array, since untyped makes no boost here
-function makeTable() {
-  var c, table = [];
-
-  for (var n = 0; n < 256; n++) {
-    c = n;
-    for (var k = 0; k < 8; k++) {
-      c = ((c & 1) ? (0xEDB88320 ^ (c >>> 1)) : (c >>> 1));
-    }
-    table[n] = c;
-  }
-
-  return table;
-}
-
-// Create table on load. Just 255 signed longs. Not a problem.
-var crcTable = makeTable();
-
-
-function crc32(crc, buf, len, pos) {
-  var t = crcTable,
-      end = pos + len;
-
-  crc ^= -1;
-
-  for (var i = pos; i < end; i++) {
-    crc = (crc >>> 8) ^ t[(crc ^ buf[i]) & 0xFF];
-  }
-
-  return (crc ^ (-1)); // >>> 0;
-}
-
-
-module.exports = crc32;