@openclaw/discord 2026.7.2-beta.1 → 2026.7.2-beta.2

package/node_modules/@discord/embedded-app-sdk/output/lib/decimal.js-light/decimal.mjs

@@ -0,0 +1,1987 @@
+/*
+ *  decimal.js-light v2.5.1
+ *  An arbitrary-precision Decimal type for JavaScript.
+ *  https://github.com/MikeMcl/decimal.js-light
+ *  Copyright (c) 2020 Michael Mclaughlin <M8ch88l@gmail.com>
+ *  MIT Expat Licence
+ */
+
+
+// ------------------------------------  EDITABLE DEFAULTS  ------------------------------------- //
+
+
+// The limit on the value of `precision`, and on the value of the first argument to
+// `toDecimalPlaces`, `toExponential`, `toFixed`, `toPrecision` and `toSignificantDigits`.
+var MAX_DIGITS = 1e9,                        // 0 to 1e9
+
+
+  // The initial configuration properties of the Decimal constructor.
+  defaults = {
+
+    // These values must be integers within the stated ranges (inclusive).
+    // Most of these values can be changed during run-time using `Decimal.config`.
+
+    // The maximum number of significant digits of the result of a calculation or base conversion.
+    // E.g. `Decimal.config({ precision: 20 });`
+    precision: 20,                         // 1 to MAX_DIGITS
+
+    // The rounding mode used by default by `toInteger`, `toDecimalPlaces`, `toExponential`,
+    // `toFixed`, `toPrecision` and `toSignificantDigits`.
+    //
+    // ROUND_UP         0 Away from zero.
+    // ROUND_DOWN       1 Towards zero.
+    // ROUND_CEIL       2 Towards +Infinity.
+    // ROUND_FLOOR      3 Towards -Infinity.
+    // ROUND_HALF_UP    4 Towards nearest neighbour. If equidistant, up.
+    // ROUND_HALF_DOWN  5 Towards nearest neighbour. If equidistant, down.
+    // ROUND_HALF_EVEN  6 Towards nearest neighbour. If equidistant, towards even neighbour.
+    // ROUND_HALF_CEIL  7 Towards nearest neighbour. If equidistant, towards +Infinity.
+    // ROUND_HALF_FLOOR 8 Towards nearest neighbour. If equidistant, towards -Infinity.
+    //
+    // E.g.
+    // `Decimal.rounding = 4;`
+    // `Decimal.rounding = Decimal.ROUND_HALF_UP;`
+    rounding: 4,                           // 0 to 8
+
+    // The exponent value at and beneath which `toString` returns exponential notation.
+    // JavaScript numbers: -7
+    toExpNeg: -7,                          // 0 to -MAX_E
+
+    // The exponent value at and above which `toString` returns exponential notation.
+    // JavaScript numbers: 21
+    toExpPos:  21,                         // 0 to MAX_E
+
+    // The natural logarithm of 10.
+    // 115 digits
+    LN10: '2.302585092994045684017991454684364207601101488628772976033327900967572609677352480235997205089598298341967784042286'
+  },
+
+
+// ------------------------------------ END OF EDITABLE DEFAULTS -------------------------------- //
+
+
+  Decimal,
+  external = true,
+
+  decimalError = '[DecimalError] ',
+  invalidArgument = decimalError + 'Invalid argument: ',
+  exponentOutOfRange = decimalError + 'Exponent out of range: ',
+
+  mathfloor = Math.floor,
+  mathpow = Math.pow,
+
+  isDecimal = /^(\d+(\.\d*)?|\.\d+)(e[+-]?\d+)?$/i,
+
+  ONE,
+  BASE = 1e7,
+  LOG_BASE = 7,
+  MAX_SAFE_INTEGER = 9007199254740991,
+  MAX_E = mathfloor(MAX_SAFE_INTEGER / LOG_BASE),    // 1286742750677284
+
+  // Decimal.prototype object
+  P = {};
+
+
+// Decimal prototype methods
+
+
+/*
+ *  absoluteValue                       abs
+ *  comparedTo                          cmp
+ *  decimalPlaces                       dp
+ *  dividedBy                           div
+ *  dividedToIntegerBy                  idiv
+ *  equals                              eq
+ *  exponent
+ *  greaterThan                         gt
+ *  greaterThanOrEqualTo                gte
+ *  isInteger                           isint
+ *  isNegative                          isneg
+ *  isPositive                          ispos
+ *  isZero
+ *  lessThan                            lt
+ *  lessThanOrEqualTo                   lte
+ *  logarithm                           log
+ *  minus                               sub
+ *  modulo                              mod
+ *  naturalExponential                  exp
+ *  naturalLogarithm                    ln
+ *  negated                             neg
+ *  plus                                add
+ *  precision                           sd
+ *  squareRoot                          sqrt
+ *  times                               mul
+ *  toDecimalPlaces                     todp
+ *  toExponential
+ *  toFixed
+ *  toInteger                           toint
+ *  toNumber
+ *  toPower                             pow
+ *  toPrecision
+ *  toSignificantDigits                 tosd
+ *  toString
+ *  valueOf                             val
+ */
+
+
+/*
+ * Return a new Decimal whose value is the absolute value of this Decimal.
+ *
+ */
+P.absoluteValue = P.abs = function () {
+  var x = new this.constructor(this);
+  if (x.s) x.s = 1;
+  return x;
+};
+
+
+/*
+ * Return
+ *   1    if the value of this Decimal is greater than the value of `y`,
+ *  -1    if the value of this Decimal is less than the value of `y`,
+ *   0    if they have the same value
+ *
+ */
+P.comparedTo = P.cmp = function (y) {
+  var i, j, xdL, ydL,
+    x = this;
+
+  y = new x.constructor(y);
+
+  // Signs differ?
+  if (x.s !== y.s) return x.s || -y.s;
+
+  // Compare exponents.
+  if (x.e !== y.e) return x.e > y.e ^ x.s < 0 ? 1 : -1;
+
+  xdL = x.d.length;
+  ydL = y.d.length;
+
+  // Compare digit by digit.
+  for (i = 0, j = xdL < ydL ? xdL : ydL; i < j; ++i) {
+    if (x.d[i] !== y.d[i]) return x.d[i] > y.d[i] ^ x.s < 0 ? 1 : -1;
+  }
+
+  // Compare lengths.
+  return xdL === ydL ? 0 : xdL > ydL ^ x.s < 0 ? 1 : -1;
+};
+
+
+/*
+ * Return the number of decimal places of the value of this Decimal.
+ *
+ */
+P.decimalPlaces = P.dp = function () {
+  var x = this,
+    w = x.d.length - 1,
+    dp = (w - x.e) * LOG_BASE;
+
+  // Subtract the number of trailing zeros of the last word.
+  w = x.d[w];
+  if (w) for (; w % 10 == 0; w /= 10) dp--;
+
+  return dp < 0 ? 0 : dp;
+};
+
+
+/*
+ * Return a new Decimal whose value is the value of this Decimal divided by `y`, truncated to
+ * `precision` significant digits.
+ *
+ */
+P.dividedBy = P.div = function (y) {
+  return divide(this, new this.constructor(y));
+};
+
+
+/*
+ * Return a new Decimal whose value is the integer part of dividing the value of this Decimal
+ * by the value of `y`, truncated to `precision` significant digits.
+ *
+ */
+P.dividedToIntegerBy = P.idiv = function (y) {
+  var x = this,
+    Ctor = x.constructor;
+  return round(divide(x, new Ctor(y), 0, 1), Ctor.precision);
+};
+
+
+/*
+ * Return true if the value of this Decimal is equal to the value of `y`, otherwise return false.
+ *
+ */
+P.equals = P.eq = function (y) {
+  return !this.cmp(y);
+};
+
+
+/*
+ * Return the (base 10) exponent value of this Decimal (this.e is the base 10000000 exponent).
+ *
+ */
+P.exponent = function () {
+  return getBase10Exponent(this);
+};
+
+
+/*
+ * Return true if the value of this Decimal is greater than the value of `y`, otherwise return
+ * false.
+ *
+ */
+P.greaterThan = P.gt = function (y) {
+  return this.cmp(y) > 0;
+};
+
+
+/*
+ * Return true if the value of this Decimal is greater than or equal to the value of `y`,
+ * otherwise return false.
+ *
+ */
+P.greaterThanOrEqualTo = P.gte = function (y) {
+  return this.cmp(y) >= 0;
+};
+
+
+/*
+ * Return true if the value of this Decimal is an integer, otherwise return false.
+ *
+ */
+P.isInteger = P.isint = function () {
+  return this.e > this.d.length - 2;
+};
+
+
+/*
+ * Return true if the value of this Decimal is negative, otherwise return false.
+ *
+ */
+P.isNegative = P.isneg = function () {
+  return this.s < 0;
+};
+
+
+/*
+ * Return true if the value of this Decimal is positive, otherwise return false.
+ *
+ */
+P.isPositive = P.ispos = function () {
+  return this.s > 0;
+};
+
+
+/*
+ * Return true if the value of this Decimal is 0, otherwise return false.
+ *
+ */
+P.isZero = function () {
+  return this.s === 0;
+};
+
+
+/*
+ * Return true if the value of this Decimal is less than `y`, otherwise return false.
+ *
+ */
+P.lessThan = P.lt = function (y) {
+  return this.cmp(y) < 0;
+};
+
+
+/*
+ * Return true if the value of this Decimal is less than or equal to `y`, otherwise return false.
+ *
+ */
+P.lessThanOrEqualTo = P.lte = function (y) {
+  return this.cmp(y) < 1;
+};
+
+
+/*
+ * Return the logarithm of the value of this Decimal to the specified base, truncated to
+ * `precision` significant digits.
+ *
+ * If no base is specified, return log[10](x).
+ *
+ * log[base](x) = ln(x) / ln(base)
+ *
+ * The maximum error of the result is 1 ulp (unit in the last place).
+ *
+ * [base] {number|string|Decimal} The base of the logarithm.
+ *
+ */
+P.logarithm = P.log = function (base) {
+  var r,
+    x = this,
+    Ctor = x.constructor,
+    pr = Ctor.precision,
+    wpr = pr + 5;
+
+  // Default base is 10.
+  if (base === void 0) {
+    base = new Ctor(10);
+  } else {
+    base = new Ctor(base);
+
+    // log[-b](x) = NaN
+    // log[0](x)  = NaN
+    // log[1](x)  = NaN
+    if (base.s < 1 || base.eq(ONE)) throw Error(decimalError + 'NaN');
+  }
+
+  // log[b](-x) = NaN
+  // log[b](0) = -Infinity
+  if (x.s < 1) throw Error(decimalError + (x.s ? 'NaN' : '-Infinity'));
+
+  // log[b](1) = 0
+  if (x.eq(ONE)) return new Ctor(0);
+
+  external = false;
+  r = divide(ln(x, wpr), ln(base, wpr), wpr);
+  external = true;
+
+  return round(r, pr);
+};
+
+
+/*
+ * Return a new Decimal whose value is the value of this Decimal minus `y`, truncated to
+ * `precision` significant digits.
+ *
+ */
+P.minus = P.sub = function (y) {
+  var x = this;
+  y = new x.constructor(y);
+  return x.s == y.s ? subtract(x, y) : add(x, (y.s = -y.s, y));
+};
+
+
+/*
+ * Return a new Decimal whose value is the value of this Decimal modulo `y`, truncated to
+ * `precision` significant digits.
+ *
+ */
+P.modulo = P.mod = function (y) {
+  var q,
+    x = this,
+    Ctor = x.constructor,
+    pr = Ctor.precision;
+
+  y = new Ctor(y);
+
+  // x % 0 = NaN
+  if (!y.s) throw Error(decimalError + 'NaN');
+
+  // Return x if x is 0.
+  if (!x.s) return round(new Ctor(x), pr);
+
+  // Prevent rounding of intermediate calculations.
+  external = false;
+  q = divide(x, y, 0, 1).times(y);
+  external = true;
+
+  return x.minus(q);
+};
+
+
+/*
+ * Return a new Decimal whose value is the natural exponential of the value of this Decimal,
+ * i.e. the base e raised to the power the value of this Decimal, truncated to `precision`
+ * significant digits.
+ *
+ */
+P.naturalExponential = P.exp = function () {
+  return exp(this);
+};
+
+
+/*
+ * Return a new Decimal whose value is the natural logarithm of the value of this Decimal,
+ * truncated to `precision` significant digits.
+ *
+ */
+P.naturalLogarithm = P.ln = function () {
+  return ln(this);
+};
+
+
+/*
+ * Return a new Decimal whose value is the value of this Decimal negated, i.e. as if multiplied by
+ * -1.
+ *
+ */
+P.negated = P.neg = function () {
+  var x = new this.constructor(this);
+  x.s = -x.s || 0;
+  return x;
+};
+
+
+/*
+ * Return a new Decimal whose value is the value of this Decimal plus `y`, truncated to
+ * `precision` significant digits.
+ *
+ */
+P.plus = P.add = function (y) {
+  var x = this;
+  y = new x.constructor(y);
+  return x.s == y.s ? add(x, y) : subtract(x, (y.s = -y.s, y));
+};
+
+
+/*
+ * Return the number of significant digits of the value of this Decimal.
+ *
+ * [z] {boolean|number} Whether to count integer-part trailing zeros: true, false, 1 or 0.
+ *
+ */
+P.precision = P.sd = function (z) {
+  var e, sd, w,
+    x = this;
+
+  if (z !== void 0 && z !== !!z && z !== 1 && z !== 0) throw Error(invalidArgument + z);
+
+  e = getBase10Exponent(x) + 1;
+  w = x.d.length - 1;
+  sd = w * LOG_BASE + 1;
+  w = x.d[w];
+
+  // If non-zero...
+  if (w) {
+
+    // Subtract the number of trailing zeros of the last word.
+    for (; w % 10 == 0; w /= 10) sd--;
+
+    // Add the number of digits of the first word.
+    for (w = x.d[0]; w >= 10; w /= 10) sd++;
+  }
+
+  return z && e > sd ? e : sd;
+};
+
+
+/*
+ * Return a new Decimal whose value is the square root of this Decimal, truncated to `precision`
+ * significant digits.
+ *
+ */
+P.squareRoot = P.sqrt = function () {
+  var e, n, pr, r, s, t, wpr,
+    x = this,
+    Ctor = x.constructor;
+
+  // Negative or zero?
+  if (x.s < 1) {
+    if (!x.s) return new Ctor(0);
+
+    // sqrt(-x) = NaN
+    throw Error(decimalError + 'NaN');
+  }
+
+  e = getBase10Exponent(x);
+  external = false;
+
+  // Initial estimate.
+  s = Math.sqrt(+x);
+
+  // Math.sqrt underflow/overflow?
+  // Pass x to Math.sqrt as integer, then adjust the exponent of the result.
+  if (s == 0 || s == 1 / 0) {
+    n = digitsToString(x.d);
+    if ((n.length + e) % 2 == 0) n += '0';
+    s = Math.sqrt(n);
+    e = mathfloor((e + 1) / 2) - (e < 0 || e % 2);
+
+    if (s == 1 / 0) {
+      n = '5e' + e;
+    } else {
+      n = s.toExponential();
+      n = n.slice(0, n.indexOf('e') + 1) + e;
+    }
+
+    r = new Ctor(n);
+  } else {
+    r = new Ctor(s.toString());
+  }
+
+  pr = Ctor.precision;
+  s = wpr = pr + 3;
+
+  // Newton-Raphson iteration.
+  for (;;) {
+    t = r;
+    r = t.plus(divide(x, t, wpr + 2)).times(0.5);
+
+    if (digitsToString(t.d).slice(0, wpr) === (n = digitsToString(r.d)).slice(0, wpr)) {
+      n = n.slice(wpr - 3, wpr + 1);
+
+      // The 4th rounding digit may be in error by -1 so if the 4 rounding digits are 9999 or
+      // 4999, i.e. approaching a rounding boundary, continue the iteration.
+      if (s == wpr && n == '4999') {
+
+        // On the first iteration only, check to see if rounding up gives the exact result as the
+        // nines may infinitely repeat.
+        round(t, pr + 1, 0);
+
+        if (t.times(t).eq(x)) {
+          r = t;
+          break;
+        }
+      } else if (n != '9999') {
+        break;
+      }
+
+      wpr += 4;
+    }
+  }
+
+  external = true;
+
+  return round(r, pr);
+};
+
+
+/*
+ * Return a new Decimal whose value is the value of this Decimal times `y`, truncated to
+ * `precision` significant digits.
+ *
+ */
+P.times = P.mul = function (y) {
+  var carry, e, i, k, r, rL, t, xdL, ydL,
+    x = this,
+    Ctor = x.constructor,
+    xd = x.d,
+    yd = (y = new Ctor(y)).d;
+
+  // Return 0 if either is 0.
+  if (!x.s || !y.s) return new Ctor(0);
+
+  y.s *= x.s;
+  e = x.e + y.e;
+  xdL = xd.length;
+  ydL = yd.length;
+
+  // Ensure xd points to the longer array.
+  if (xdL < ydL) {
+    r = xd;
+    xd = yd;
+    yd = r;
+    rL = xdL;
+    xdL = ydL;
+    ydL = rL;
+  }
+
+  // Initialise the result array with zeros.
+  r = [];
+  rL = xdL + ydL;
+  for (i = rL; i--;) r.push(0);
+
+  // Multiply!
+  for (i = ydL; --i >= 0;) {
+    carry = 0;
+    for (k = xdL + i; k > i;) {
+      t = r[k] + yd[i] * xd[k - i - 1] + carry;
+      r[k--] = t % BASE | 0;
+      carry = t / BASE | 0;
+    }
+
+    r[k] = (r[k] + carry) % BASE | 0;
+  }
+
+  // Remove trailing zeros.
+  for (; !r[--rL];) r.pop();
+
+  if (carry) ++e;
+  else r.shift();
+
+  y.d = r;
+  y.e = e;
+
+  return external ? round(y, Ctor.precision) : y;
+};
+
+
+/*
+ * Return a new Decimal whose value is the value of this Decimal rounded to a maximum of `dp`
+ * decimal places using rounding mode `rm` or `rounding` if `rm` is omitted.
+ *
+ * If `dp` is omitted, return a new Decimal whose value is the value of this Decimal.
+ *
+ * [dp] {number} Decimal places. Integer, 0 to MAX_DIGITS inclusive.
+ * [rm] {number} Rounding mode. Integer, 0 to 8 inclusive.
+ *
+ */
+P.toDecimalPlaces = P.todp = function (dp, rm) {
+  var x = this,
+    Ctor = x.constructor;
+
+  x = new Ctor(x);
+  if (dp === void 0) return x;
+
+  checkInt32(dp, 0, MAX_DIGITS);
+
+  if (rm === void 0) rm = Ctor.rounding;
+  else checkInt32(rm, 0, 8);
+
+  return round(x, dp + getBase10Exponent(x) + 1, rm);
+};
+
+
+/*
+ * Return a string representing the value of this Decimal in exponential notation rounded to
+ * `dp` fixed decimal places using rounding mode `rounding`.
+ *
+ * [dp] {number} Decimal places. Integer, 0 to MAX_DIGITS inclusive.
+ * [rm] {number} Rounding mode. Integer, 0 to 8 inclusive.
+ *
+ */
+P.toExponential = function (dp, rm) {
+  var str,
+    x = this,
+    Ctor = x.constructor;
+
+  if (dp === void 0) {
+    str = toString(x, true);
+  } else {
+    checkInt32(dp, 0, MAX_DIGITS);
+
+    if (rm === void 0) rm = Ctor.rounding;
+    else checkInt32(rm, 0, 8);
+
+    x = round(new Ctor(x), dp + 1, rm);
+    str = toString(x, true, dp + 1);
+  }
+
+  return str;
+};
+
+
+/*
+ * Return a string representing the value of this Decimal in normal (fixed-point) notation to
+ * `dp` fixed decimal places and rounded using rounding mode `rm` or `rounding` if `rm` is
+ * omitted.
+ *
+ * As with JavaScript numbers, (-0).toFixed(0) is '0', but e.g. (-0.00001).toFixed(0) is '-0'.
+ *
+ * [dp] {number} Decimal places. Integer, 0 to MAX_DIGITS inclusive.
+ * [rm] {number} Rounding mode. Integer, 0 to 8 inclusive.
+ *
+ * (-0).toFixed(0) is '0', but (-0.1).toFixed(0) is '-0'.
+ * (-0).toFixed(1) is '0.0', but (-0.01).toFixed(1) is '-0.0'.
+ * (-0).toFixed(3) is '0.000'.
+ * (-0.5).toFixed(0) is '-0'.
+ *
+ */
+P.toFixed = function (dp, rm) {
+  var str, y,
+    x = this,
+    Ctor = x.constructor;
+
+  if (dp === void 0) return toString(x);
+
+  checkInt32(dp, 0, MAX_DIGITS);
+
+  if (rm === void 0) rm = Ctor.rounding;
+  else checkInt32(rm, 0, 8);
+
+  y = round(new Ctor(x), dp + getBase10Exponent(x) + 1, rm);
+  str = toString(y.abs(), false, dp + getBase10Exponent(y) + 1);
+
+  // To determine whether to add the minus sign look at the value before it was rounded,
+  // i.e. look at `x` rather than `y`.
+  return x.isneg() && !x.isZero() ? '-' + str : str;
+};
+
+
+/*
+ * Return a new Decimal whose value is the value of this Decimal rounded to a whole number using
+ * rounding mode `rounding`.
+ *
+ */
+P.toInteger = P.toint = function () {
+  var x = this,
+    Ctor = x.constructor;
+  return round(new Ctor(x), getBase10Exponent(x) + 1, Ctor.rounding);
+};
+
+
+/*
+ * Return the value of this Decimal converted to a number primitive.
+ *
+ */
+P.toNumber = function () {
+  return +this;
+};
+
+
+/*
+ * Return a new Decimal whose value is the value of this Decimal raised to the power `y`,
+ * truncated to `precision` significant digits.
+ *
+ * For non-integer or very large exponents pow(x, y) is calculated using
+ *
+ *   x^y = exp(y*ln(x))
+ *
+ * The maximum error is 1 ulp (unit in last place).
+ *
+ * y {number|string|Decimal} The power to which to raise this Decimal.
+ *
+ */
+P.toPower = P.pow = function (y) {
+  var e, k, pr, r, sign, yIsInt,
+    x = this,
+    Ctor = x.constructor,
+    guard = 12,
+    yn = +(y = new Ctor(y));
+
+  // pow(x, 0) = 1
+  if (!y.s) return new Ctor(ONE);
+
+  x = new Ctor(x);
+
+  // pow(0, y > 0) = 0
+  // pow(0, y < 0) = Infinity
+  if (!x.s) {
+    if (y.s < 1) throw Error(decimalError + 'Infinity');
+    return x;
+  }
+
+  // pow(1, y) = 1
+  if (x.eq(ONE)) return x;
+
+  pr = Ctor.precision;
+
+  // pow(x, 1) = x
+  if (y.eq(ONE)) return round(x, pr);
+
+  e = y.e;
+  k = y.d.length - 1;
+  yIsInt = e >= k;
+  sign = x.s;
+
+  if (!yIsInt) {
+
+    // pow(x < 0, y non-integer) = NaN
+    if (sign < 0) throw Error(decimalError + 'NaN');
+
+  // If y is a small integer use the 'exponentiation by squaring' algorithm.
+  } else if ((k = yn < 0 ? -yn : yn) <= MAX_SAFE_INTEGER) {
+    r = new Ctor(ONE);
+
+    // Max k of 9007199254740991 takes 53 loop iterations.
+    // Maximum digits array length; leaves [28, 34] guard digits.
+    e = Math.ceil(pr / LOG_BASE + 4);
+
+    external = false;
+
+    for (;;) {
+      if (k % 2) {
+        r = r.times(x);
+        truncate(r.d, e);
+      }
+
+      k = mathfloor(k / 2);
+      if (k === 0) break;
+
+      x = x.times(x);
+      truncate(x.d, e);
+    }
+
+    external = true;
+
+    return y.s < 0 ? new Ctor(ONE).div(r) : round(r, pr);
+  }
+
+  // Result is negative if x is negative and the last digit of integer y is odd.
+  sign = sign < 0 && y.d[Math.max(e, k)] & 1 ? -1 : 1;
+
+  x.s = 1;
+  external = false;
+  r = y.times(ln(x, pr + guard));
+  external = true;
+  r = exp(r);
+  r.s = sign;
+
+  return r;
+};
+
+
+/*
+ * Return a string representing the value of this Decimal rounded to `sd` significant digits
+ * using rounding mode `rounding`.
+ *
+ * Return exponential notation if `sd` is less than the number of digits necessary to represent
+ * the integer part of the value in normal notation.
+ *
+ * [sd] {number} Significant digits. Integer, 1 to MAX_DIGITS inclusive.
+ * [rm] {number} Rounding mode. Integer, 0 to 8 inclusive.
+ *
+ */
+P.toPrecision = function (sd, rm) {
+  var e, str,
+    x = this,
+    Ctor = x.constructor;
+
+  if (sd === void 0) {
+    e = getBase10Exponent(x);
+    str = toString(x, e <= Ctor.toExpNeg || e >= Ctor.toExpPos);
+  } else {
+    checkInt32(sd, 1, MAX_DIGITS);
+
+    if (rm === void 0) rm = Ctor.rounding;
+    else checkInt32(rm, 0, 8);
+
+    x = round(new Ctor(x), sd, rm);
+    e = getBase10Exponent(x);
+    str = toString(x, sd <= e || e <= Ctor.toExpNeg, sd);
+  }
+
+  return str;
+};
+
+
+/*
+ * Return a new Decimal whose value is the value of this Decimal rounded to a maximum of `sd`
+ * significant digits using rounding mode `rm`, or to `precision` and `rounding` respectively if
+ * omitted.
+ *
+ * [sd] {number} Significant digits. Integer, 1 to MAX_DIGITS inclusive.
+ * [rm] {number} Rounding mode. Integer, 0 to 8 inclusive.
+ *
+ */
+P.toSignificantDigits = P.tosd = function (sd, rm) {
+  var x = this,
+    Ctor = x.constructor;
+
+  if (sd === void 0) {
+    sd = Ctor.precision;
+    rm = Ctor.rounding;
+  } else {
+    checkInt32(sd, 1, MAX_DIGITS);
+
+    if (rm === void 0) rm = Ctor.rounding;
+    else checkInt32(rm, 0, 8);
+  }
+
+  return round(new Ctor(x), sd, rm);
+};
+
+
+/*
+ * Return a string representing the value of this Decimal.
+ *
+ * Return exponential notation if this Decimal has a positive exponent equal to or greater than
+ * `toExpPos`, or a negative exponent equal to or less than `toExpNeg`.
+ *
+ */
+P.toString = P.valueOf = P.val = P.toJSON = P[Symbol.for('nodejs.util.inspect.custom')] = function () {
+  var x = this,
+    e = getBase10Exponent(x),
+    Ctor = x.constructor;
+
+  return toString(x, e <= Ctor.toExpNeg || e >= Ctor.toExpPos);
+};
+
+
+// Helper functions for Decimal.prototype (P) and/or Decimal methods, and their callers.
+
+
+/*
+ *  add                 P.minus, P.plus
+ *  checkInt32          P.todp, P.toExponential, P.toFixed, P.toPrecision, P.tosd
+ *  digitsToString      P.log, P.sqrt, P.pow, toString, exp, ln
+ *  divide              P.div, P.idiv, P.log, P.mod, P.sqrt, exp, ln
+ *  exp                 P.exp, P.pow
+ *  getBase10Exponent   P.exponent, P.sd, P.toint, P.sqrt, P.todp, P.toFixed, P.toPrecision,
+ *                      P.toString, divide, round, toString, exp, ln
+ *  getLn10             P.log, ln
+ *  getZeroString       digitsToString, toString
+ *  ln                  P.log, P.ln, P.pow, exp
+ *  parseDecimal        Decimal
+ *  round               P.abs, P.idiv, P.log, P.minus, P.mod, P.neg, P.plus, P.toint, P.sqrt,
+ *                      P.times, P.todp, P.toExponential, P.toFixed, P.pow, P.toPrecision, P.tosd,
+ *                      divide, getLn10, exp, ln
+ *  subtract            P.minus, P.plus
+ *  toString            P.toExponential, P.toFixed, P.toPrecision, P.toString, P.valueOf
+ *  truncate            P.pow
+ *
+ *  Throws:             P.log, P.mod, P.sd, P.sqrt, P.pow,  checkInt32, divide, round,
+ *                      getLn10, exp, ln, parseDecimal, Decimal, config
+ */
+
+
+function add(x, y) {
+  var carry, d, e, i, k, len, xd, yd,
+    Ctor = x.constructor,
+    pr = Ctor.precision;
+
+  // If either is zero...
+  if (!x.s || !y.s) {
+
+    // Return x if y is zero.
+    // Return y if y is non-zero.
+    if (!y.s) y = new Ctor(x);
+    return external ? round(y, pr) : y;
+  }
+
+  xd = x.d;
+  yd = y.d;
+
+  // x and y are finite, non-zero numbers with the same sign.
+
+  k = x.e;
+  e = y.e;
+  xd = xd.slice();
+  i = k - e;
+
+  // If base 1e7 exponents differ...
+  if (i) {
+    if (i < 0) {
+      d = xd;
+      i = -i;
+      len = yd.length;
+    } else {
+      d = yd;
+      e = k;
+      len = xd.length;
+    }
+
+    // Limit number of zeros prepended to max(ceil(pr / LOG_BASE), len) + 1.
+    k = Math.ceil(pr / LOG_BASE);
+    len = k > len ? k + 1 : len + 1;
+
+    if (i > len) {
+      i = len;
+      d.length = 1;
+    }
+
+    // Prepend zeros to equalise exponents. Note: Faster to use reverse then do unshifts.
+    d.reverse();
+    for (; i--;) d.push(0);
+    d.reverse();
+  }
+
+  len = xd.length;
+  i = yd.length;
+
+  // If yd is longer than xd, swap xd and yd so xd points to the longer array.
+  if (len - i < 0) {
+    i = len;
+    d = yd;
+    yd = xd;
+    xd = d;
+  }
+
+  // Only start adding at yd.length - 1 as the further digits of xd can be left as they are.
+  for (carry = 0; i;) {
+    carry = (xd[--i] = xd[i] + yd[i] + carry) / BASE | 0;
+    xd[i] %= BASE;
+  }
+
+  if (carry) {
+    xd.unshift(carry);
+    ++e;
+  }
+
+  // Remove trailing zeros.
+  // No need to check for zero, as +x + +y != 0 && -x + -y != 0
+  for (len = xd.length; xd[--len] == 0;) xd.pop();
+
+  y.d = xd;
+  y.e = e;
+
+  return external ? round(y, pr) : y;
+}
+
+
+function checkInt32(i, min, max) {
+  if (i !== ~~i || i < min || i > max) {
+    throw Error(invalidArgument + i);
+  }
+}
+
+
+function digitsToString(d) {
+  var i, k, ws,
+    indexOfLastWord = d.length - 1,
+    str = '',
+    w = d[0];
+
+  if (indexOfLastWord > 0) {
+    str += w;
+    for (i = 1; i < indexOfLastWord; i++) {
+      ws = d[i] + '';
+      k = LOG_BASE - ws.length;
+      if (k) str += getZeroString(k);
+      str += ws;
+    }
+
+    w = d[i];
+    ws = w + '';
+    k = LOG_BASE - ws.length;
+    if (k) str += getZeroString(k);
+  } else if (w === 0) {
+    return '0';
+  }
+
+  // Remove trailing zeros of last w.
+  for (; w % 10 === 0;) w /= 10;
+
+  return str + w;
+}
+
+
+var divide = (function () {
+
+  // Assumes non-zero x and k, and hence non-zero result.
+  function multiplyInteger(x, k) {
+    var temp,
+      carry = 0,
+      i = x.length;
+
+    for (x = x.slice(); i--;) {
+      temp = x[i] * k + carry;
+      x[i] = temp % BASE | 0;
+      carry = temp / BASE | 0;
+    }
+
+    if (carry) x.unshift(carry);
+
+    return x;
+  }
+
+  function compare(a, b, aL, bL) {
+    var i, r;
+
+    if (aL != bL) {
+      r = aL > bL ? 1 : -1;
+    } else {
+      for (i = r = 0; i < aL; i++) {
+        if (a[i] != b[i]) {
+          r = a[i] > b[i] ? 1 : -1;
+          break;
+        }
+      }
+    }
+
+    return r;
+  }
+
+  function subtract(a, b, aL) {
+    var i = 0;
+
+    // Subtract b from a.
+    for (; aL--;) {
+      a[aL] -= i;
+      i = a[aL] < b[aL] ? 1 : 0;
+      a[aL] = i * BASE + a[aL] - b[aL];
+    }
+
+    // Remove leading zeros.
+    for (; !a[0] && a.length > 1;) a.shift();
+  }
+
+  return function (x, y, pr, dp) {
+    var cmp, e, i, k, prod, prodL, q, qd, rem, remL, rem0, sd, t, xi, xL, yd0, yL, yz,
+      Ctor = x.constructor,
+      sign = x.s == y.s ? 1 : -1,
+      xd = x.d,
+      yd = y.d;
+
+    // Either 0?
+    if (!x.s) return new Ctor(x);
+    if (!y.s) throw Error(decimalError + 'Division by zero');
+
+    e = x.e - y.e;
+    yL = yd.length;
+    xL = xd.length;
+    q = new Ctor(sign);
+    qd = q.d = [];
+
+    // Result exponent may be one less than e.
+    for (i = 0; yd[i] == (xd[i] || 0); ) ++i;
+    if (yd[i] > (xd[i] || 0)) --e;
+
+    if (pr == null) {
+      sd = pr = Ctor.precision;
+    } else if (dp) {
+      sd = pr + (getBase10Exponent(x) - getBase10Exponent(y)) + 1;
+    } else {
+      sd = pr;
+    }
+
+    if (sd < 0) return new Ctor(0);
+
+    // Convert precision in number of base 10 digits to base 1e7 digits.
+    sd = sd / LOG_BASE + 2 | 0;
+    i = 0;
+
+    // divisor < 1e7
+    if (yL == 1) {
+      k = 0;
+      yd = yd[0];
+      sd++;
+
+      // k is the carry.
+      for (; (i < xL || k) && sd--; i++) {
+        t = k * BASE + (xd[i] || 0);
+        qd[i] = t / yd | 0;
+        k = t % yd | 0;
+      }
+
+    // divisor >= 1e7
+    } else {
+
+      // Normalise xd and yd so highest order digit of yd is >= BASE/2
+      k = BASE / (yd[0] + 1) | 0;
+
+      if (k > 1) {
+        yd = multiplyInteger(yd, k);
+        xd = multiplyInteger(xd, k);
+        yL = yd.length;
+        xL = xd.length;
+      }
+
+      xi = yL;
+      rem = xd.slice(0, yL);
+      remL = rem.length;
+
+      // Add zeros to make remainder as long as divisor.
+      for (; remL < yL;) rem[remL++] = 0;
+
+      yz = yd.slice();
+      yz.unshift(0);
+      yd0 = yd[0];
+
+      if (yd[1] >= BASE / 2) ++yd0;
+
+      do {
+        k = 0;
+
+        // Compare divisor and remainder.
+        cmp = compare(yd, rem, yL, remL);
+
+        // If divisor < remainder.
+        if (cmp < 0) {
+
+          // Calculate trial digit, k.
+          rem0 = rem[0];
+          if (yL != remL) rem0 = rem0 * BASE + (rem[1] || 0);
+
+          // k will be how many times the divisor goes into the current remainder.
+          k = rem0 / yd0 | 0;
+
+          //  Algorithm:
+          //  1. product = divisor * trial digit (k)
+          //  2. if product > remainder: product -= divisor, k--
+          //  3. remainder -= product
+          //  4. if product was < remainder at 2:
+          //    5. compare new remainder and divisor
+          //    6. If remainder > divisor: remainder -= divisor, k++
+
+          if (k > 1) {
+            if (k >= BASE) k = BASE - 1;
+
+            // product = divisor * trial digit.
+            prod = multiplyInteger(yd, k);
+            prodL = prod.length;
+            remL = rem.length;
+
+            // Compare product and remainder.
+            cmp = compare(prod, rem, prodL, remL);
+
+            // product > remainder.
+            if (cmp == 1) {
+              k--;
+
+              // Subtract divisor from product.
+              subtract(prod, yL < prodL ? yz : yd, prodL);
+            }
+          } else {
+
+            // cmp is -1.
+            // If k is 0, there is no need to compare yd and rem again below, so change cmp to 1
+            // to avoid it. If k is 1 there is a need to compare yd and rem again below.
+            if (k == 0) cmp = k = 1;
+            prod = yd.slice();
+          }
+
+          prodL = prod.length;
+          if (prodL < remL) prod.unshift(0);
+
+          // Subtract product from remainder.
+          subtract(rem, prod, remL);
+
+          // If product was < previous remainder.
+          if (cmp == -1) {
+            remL = rem.length;
+
+            // Compare divisor and new remainder.
+            cmp = compare(yd, rem, yL, remL);
+
+            // If divisor < new remainder, subtract divisor from remainder.
+            if (cmp < 1) {
+              k++;
+
+              // Subtract divisor from remainder.
+              subtract(rem, yL < remL ? yz : yd, remL);
+            }
+          }
+
+          remL = rem.length;
+        } else if (cmp === 0) {
+          k++;
+          rem = [0];
+        }    // if cmp === 1, k will be 0
+
+        // Add the next digit, k, to the result array.
+        qd[i++] = k;
+
+        // Update the remainder.
+        if (cmp && rem[0]) {
+          rem[remL++] = xd[xi] || 0;
+        } else {
+          rem = [xd[xi]];
+          remL = 1;
+        }
+
+      } while ((xi++ < xL || rem[0] !== void 0) && sd--);
+    }
+
+    // Leading zero?
+    if (!qd[0]) qd.shift();
+
+    q.e = e;
+
+    return round(q, dp ? pr + getBase10Exponent(q) + 1 : pr);
+  };
+})();
+
+
+/*
+ * Return a new Decimal whose value is the natural exponential of `x` truncated to `sd`
+ * significant digits.
+ *
+ * Taylor/Maclaurin series.
+ *
+ * exp(x) = x^0/0! + x^1/1! + x^2/2! + x^3/3! + ...
+ *
+ * Argument reduction:
+ *   Repeat x = x / 32, k += 5, until |x| < 0.1
+ *   exp(x) = exp(x / 2^k)^(2^k)
+ *
+ * Previously, the argument was initially reduced by
+ * exp(x) = exp(r) * 10^k  where r = x - k * ln10, k = floor(x / ln10)
+ * to first put r in the range [0, ln10], before dividing by 32 until |x| < 0.1, but this was
+ * found to be slower than just dividing repeatedly by 32 as above.
+ *
+ * (Math object integer min/max: Math.exp(709) = 8.2e+307, Math.exp(-745) = 5e-324)
+ *
+ *  exp(x) is non-terminating for any finite, non-zero x.
+ *
+ */
+function exp(x, sd) {
+  var denominator, guard, pow, sum, t, wpr,
+    i = 0,
+    k = 0,
+    Ctor = x.constructor,
+    pr = Ctor.precision;
+
+  if (getBase10Exponent(x) > 16) throw Error(exponentOutOfRange + getBase10Exponent(x));
+
+  // exp(0) = 1
+  if (!x.s) return new Ctor(ONE);
+
+  if (sd == null) {
+    external = false;
+    wpr = pr;
+  } else {
+    wpr = sd;
+  }
+
+  t = new Ctor(0.03125);
+
+  while (x.abs().gte(0.1)) {
+    x = x.times(t);    // x = x / 2^5
+    k += 5;
+  }
+
+  // Estimate the precision increase necessary to ensure the first 4 rounding digits are correct.
+  guard = Math.log(mathpow(2, k)) / Math.LN10 * 2 + 5 | 0;
+  wpr += guard;
+  denominator = pow = sum = new Ctor(ONE);
+  Ctor.precision = wpr;
+
+  for (;;) {
+    pow = round(pow.times(x), wpr);
+    denominator = denominator.times(++i);
+    t = sum.plus(divide(pow, denominator, wpr));
+
+    if (digitsToString(t.d).slice(0, wpr) === digitsToString(sum.d).slice(0, wpr)) {
+      while (k--) sum = round(sum.times(sum), wpr);
+      Ctor.precision = pr;
+      return sd == null ? (external = true, round(sum, pr)) : sum;
+    }
+
+    sum = t;
+  }
+}
+
+
+// Calculate the base 10 exponent from the base 1e7 exponent.
+function getBase10Exponent(x) {
+  var e = x.e * LOG_BASE,
+    w = x.d[0];
+
+  // Add the number of digits of the first word of the digits array.
+  for (; w >= 10; w /= 10) e++;
+  return e;
+}
+
+
+function getLn10(Ctor, sd, pr) {
+
+  if (sd > Ctor.LN10.sd()) {
+
+
+    // Reset global state in case the exception is caught.
+    external = true;
+    if (pr) Ctor.precision = pr;
+    throw Error(decimalError + 'LN10 precision limit exceeded');
+  }
+
+  return round(new Ctor(Ctor.LN10), sd);
+}
+
+
+function getZeroString(k) {
+  var zs = '';
+  for (; k--;) zs += '0';
+  return zs;
+}
+
+
+/*
+ * Return a new Decimal whose value is the natural logarithm of `x` truncated to `sd` significant
+ * digits.
+ *
+ *  ln(n) is non-terminating (n != 1)
+ *
+ */
+function ln(y, sd) {
+  var c, c0, denominator, e, numerator, sum, t, wpr, x2,
+    n = 1,
+    guard = 10,
+    x = y,
+    xd = x.d,
+    Ctor = x.constructor,
+    pr = Ctor.precision;
+
+  // ln(-x) = NaN
+  // ln(0) = -Infinity
+  if (x.s < 1) throw Error(decimalError + (x.s ? 'NaN' : '-Infinity'));
+
+  // ln(1) = 0
+  if (x.eq(ONE)) return new Ctor(0);
+
+  if (sd == null) {
+    external = false;
+    wpr = pr;
+  } else {
+    wpr = sd;
+  }
+
+  if (x.eq(10)) {
+    if (sd == null) external = true;
+    return getLn10(Ctor, wpr);
+  }
+
+  wpr += guard;
+  Ctor.precision = wpr;
+  c = digitsToString(xd);
+  c0 = c.charAt(0);
+  e = getBase10Exponent(x);
+
+  if (Math.abs(e) < 1.5e15) {
+
+    // Argument reduction.
+    // The series converges faster the closer the argument is to 1, so using
+    // ln(a^b) = b * ln(a),   ln(a) = ln(a^b) / b
+    // multiply the argument by itself until the leading digits of the significand are 7, 8, 9,
+    // 10, 11, 12 or 13, recording the number of multiplications so the sum of the series can
+    // later be divided by this number, then separate out the power of 10 using
+    // ln(a*10^b) = ln(a) + b*ln(10).
+
+    // max n is 21 (gives 0.9, 1.0 or 1.1) (9e15 / 21 = 4.2e14).
+    //while (c0 < 9 && c0 != 1 || c0 == 1 && c.charAt(1) > 1) {
+    // max n is 6 (gives 0.7 - 1.3)
+    while (c0 < 7 && c0 != 1 || c0 == 1 && c.charAt(1) > 3) {
+      x = x.times(y);
+      c = digitsToString(x.d);
+      c0 = c.charAt(0);
+      n++;
+    }
+
+    e = getBase10Exponent(x);
+
+    if (c0 > 1) {
+      x = new Ctor('0.' + c);
+      e++;
+    } else {
+      x = new Ctor(c0 + '.' + c.slice(1));
+    }
+  } else {
+
+    // The argument reduction method above may result in overflow if the argument y is a massive
+    // number with exponent >= 1500000000000000 (9e15 / 6 = 1.5e15), so instead recall this
+    // function using ln(x*10^e) = ln(x) + e*ln(10).
+    t = getLn10(Ctor, wpr + 2, pr).times(e + '');
+    x = ln(new Ctor(c0 + '.' + c.slice(1)), wpr - guard).plus(t);
+
+    Ctor.precision = pr;
+    return sd == null ? (external = true, round(x, pr)) : x;
+  }
+
+  // x is reduced to a value near 1.
+
+  // Taylor series.
+  // ln(y) = ln((1 + x)/(1 - x)) = 2(x + x^3/3 + x^5/5 + x^7/7 + ...)
+  // where x = (y - 1)/(y + 1)    (|x| < 1)
+  sum = numerator = x = divide(x.minus(ONE), x.plus(ONE), wpr);
+  x2 = round(x.times(x), wpr);
+  denominator = 3;
+
+  for (;;) {
+    numerator = round(numerator.times(x2), wpr);
+    t = sum.plus(divide(numerator, new Ctor(denominator), wpr));
+
+    if (digitsToString(t.d).slice(0, wpr) === digitsToString(sum.d).slice(0, wpr)) {
+      sum = sum.times(2);
+
+      // Reverse the argument reduction.
+      if (e !== 0) sum = sum.plus(getLn10(Ctor, wpr + 2, pr).times(e + ''));
+      sum = divide(sum, new Ctor(n), wpr);
+
+      Ctor.precision = pr;
+      return sd == null ? (external = true, round(sum, pr)) : sum;
+    }
+
+    sum = t;
+    denominator += 2;
+  }
+}
+
+
+/*
+ * Parse the value of a new Decimal `x` from string `str`.
+ */
+function parseDecimal(x, str) {
+  var e, i, len;
+
+  // Decimal point?
+  if ((e = str.indexOf('.')) > -1) str = str.replace('.', '');
+
+  // Exponential form?
+  if ((i = str.search(/e/i)) > 0) {
+
+    // Determine exponent.
+    if (e < 0) e = i;
+    e += +str.slice(i + 1);
+    str = str.substring(0, i);
+  } else if (e < 0) {
+
+    // Integer.
+    e = str.length;
+  }
+
+  // Determine leading zeros.
+  for (i = 0; str.charCodeAt(i) === 48;) ++i;
+
+  // Determine trailing zeros.
+  for (len = str.length; str.charCodeAt(len - 1) === 48;) --len;
+  str = str.slice(i, len);
+
+  if (str) {
+    len -= i;
+    e = e - i - 1;
+    x.e = mathfloor(e / LOG_BASE);
+    x.d = [];
+
+    // Transform base
+
+    // e is the base 10 exponent.
+    // i is where to slice str to get the first word of the digits array.
+    i = (e + 1) % LOG_BASE;
+    if (e < 0) i += LOG_BASE;
+
+    if (i < len) {
+      if (i) x.d.push(+str.slice(0, i));
+      for (len -= LOG_BASE; i < len;) x.d.push(+str.slice(i, i += LOG_BASE));
+      str = str.slice(i);
+      i = LOG_BASE - str.length;
+    } else {
+      i -= len;
+    }
+
+    for (; i--;) str += '0';
+    x.d.push(+str);
+
+    if (external && (x.e > MAX_E || x.e < -MAX_E)) throw Error(exponentOutOfRange + e);
+  } else {
+
+    // Zero.
+    x.s = 0;
+    x.e = 0;
+    x.d = [0];
+  }
+
+  return x;
+}
+
+
+/*
+ * Round `x` to `sd` significant digits, using rounding mode `rm` if present (truncate otherwise).
+ */
+ function round(x, sd, rm) {
+  var i, j, k, n, rd, doRound, w, xdi,
+    xd = x.d;
+
+  // rd: the rounding digit, i.e. the digit after the digit that may be rounded up.
+  // w: the word of xd which contains the rounding digit, a base 1e7 number.
+  // xdi: the index of w within xd.
+  // n: the number of digits of w.
+  // i: what would be the index of rd within w if all the numbers were 7 digits long (i.e. if
+  // they had leading zeros)
+  // j: if > 0, the actual index of rd within w (if < 0, rd is a leading zero).
+
+  // Get the length of the first word of the digits array xd.
+  for (n = 1, k = xd[0]; k >= 10; k /= 10) n++;
+  i = sd - n;
+
+  // Is the rounding digit in the first word of xd?
+  if (i < 0) {
+    i += LOG_BASE;
+    j = sd;
+    w = xd[xdi = 0];
+  } else {
+    xdi = Math.ceil((i + 1) / LOG_BASE);
+    k = xd.length;
+    if (xdi >= k) return x;
+    w = k = xd[xdi];
+
+    // Get the number of digits of w.
+    for (n = 1; k >= 10; k /= 10) n++;
+
+    // Get the index of rd within w.
+    i %= LOG_BASE;
+
+    // Get the index of rd within w, adjusted for leading zeros.
+    // The number of leading zeros of w is given by LOG_BASE - n.
+    j = i - LOG_BASE + n;
+  }
+
+  if (rm !== void 0) {
+    k = mathpow(10, n - j - 1);
+
+    // Get the rounding digit at index j of w.
+    rd = w / k % 10 | 0;
+
+    // Are there any non-zero digits after the rounding digit?
+    doRound = sd < 0 || xd[xdi + 1] !== void 0 || w % k;
+
+    // The expression `w % mathpow(10, n - j - 1)` returns all the digits of w to the right of the
+    // digit at (left-to-right) index j, e.g. if w is 908714 and j is 2, the expression will give
+    // 714.
+
+    doRound = rm < 4
+      ? (rd || doRound) && (rm == 0 || rm == (x.s < 0 ? 3 : 2))
+      : rd > 5 || rd == 5 && (rm == 4 || doRound || rm == 6 &&
+
+        // Check whether the digit to the left of the rounding digit is odd.
+        ((i > 0 ? j > 0 ? w / mathpow(10, n - j) : 0 : xd[xdi - 1]) % 10) & 1 ||
+          rm == (x.s < 0 ? 8 : 7));
+  }
+
+  if (sd < 1 || !xd[0]) {
+    if (doRound) {
+      k = getBase10Exponent(x);
+      xd.length = 1;
+
+      // Convert sd to decimal places.
+      sd = sd - k - 1;
+
+      // 1, 0.1, 0.01, 0.001, 0.0001 etc.
+      xd[0] = mathpow(10, (LOG_BASE - sd % LOG_BASE) % LOG_BASE);
+      x.e = mathfloor(-sd / LOG_BASE) || 0;
+    } else {
+      xd.length = 1;
+
+      // Zero.
+      xd[0] = x.e = x.s = 0;
+    }
+
+    return x;
+  }
+
+  // Remove excess digits.
+  if (i == 0) {
+    xd.length = xdi;
+    k = 1;
+    xdi--;
+  } else {
+    xd.length = xdi + 1;
+    k = mathpow(10, LOG_BASE - i);
+
+    // E.g. 56700 becomes 56000 if 7 is the rounding digit.
+    // j > 0 means i > number of leading zeros of w.
+    xd[xdi] = j > 0 ? (w / mathpow(10, n - j) % mathpow(10, j) | 0) * k : 0;
+  }
+
+  if (doRound) {
+    for (;;) {
+
+      // Is the digit to be rounded up in the first word of xd?
+      if (xdi == 0) {
+        if ((xd[0] += k) == BASE) {
+          xd[0] = 1;
+          ++x.e;
+        }
+
+        break;
+      } else {
+        xd[xdi] += k;
+        if (xd[xdi] != BASE) break;
+        xd[xdi--] = 0;
+        k = 1;
+      }
+    }
+  }
+
+  // Remove trailing zeros.
+  for (i = xd.length; xd[--i] === 0;) xd.pop();
+
+  if (external && (x.e > MAX_E || x.e < -MAX_E)) {
+    throw Error(exponentOutOfRange + getBase10Exponent(x));
+  }
+
+  return x;
+}
+
+
+function subtract(x, y) {
+  var d, e, i, j, k, len, xd, xe, xLTy, yd,
+    Ctor = x.constructor,
+    pr = Ctor.precision;
+
+  // Return y negated if x is zero.
+  // Return x if y is zero and x is non-zero.
+  if (!x.s || !y.s) {
+    if (y.s) y.s = -y.s;
+    else y = new Ctor(x);
+    return external ? round(y, pr) : y;
+  }
+
+  xd = x.d;
+  yd = y.d;
+
+  // x and y are non-zero numbers with the same sign.
+
+  e = y.e;
+  xe = x.e;
+  xd = xd.slice();
+  k = xe - e;
+
+  // If exponents differ...
+  if (k) {
+    xLTy = k < 0;
+
+    if (xLTy) {
+      d = xd;
+      k = -k;
+      len = yd.length;
+    } else {
+      d = yd;
+      e = xe;
+      len = xd.length;
+    }
+
+    // Numbers with massively different exponents would result in a very high number of zeros
+    // needing to be prepended, but this can be avoided while still ensuring correct rounding by
+    // limiting the number of zeros to `Math.ceil(pr / LOG_BASE) + 2`.
+    i = Math.max(Math.ceil(pr / LOG_BASE), len) + 2;
+
+    if (k > i) {
+      k = i;
+      d.length = 1;
+    }
+
+    // Prepend zeros to equalise exponents.
+    d.reverse();
+    for (i = k; i--;) d.push(0);
+    d.reverse();
+
+  // Base 1e7 exponents equal.
+  } else {
+
+    // Check digits to determine which is the bigger number.
+
+    i = xd.length;
+    len = yd.length;
+    xLTy = i < len;
+    if (xLTy) len = i;
+
+    for (i = 0; i < len; i++) {
+      if (xd[i] != yd[i]) {
+        xLTy = xd[i] < yd[i];
+        break;
+      }
+    }
+
+    k = 0;
+  }
+
+  if (xLTy) {
+    d = xd;
+    xd = yd;
+    yd = d;
+    y.s = -y.s;
+  }
+
+  len = xd.length;
+
+  // Append zeros to xd if shorter.
+  // Don't add zeros to yd if shorter as subtraction only needs to start at yd length.
+  for (i = yd.length - len; i > 0; --i) xd[len++] = 0;
+
+  // Subtract yd from xd.
+  for (i = yd.length; i > k;) {
+    if (xd[--i] < yd[i]) {
+      for (j = i; j && xd[--j] === 0;) xd[j] = BASE - 1;
+      --xd[j];
+      xd[i] += BASE;
+    }
+
+    xd[i] -= yd[i];
+  }
+
+  // Remove trailing zeros.
+  for (; xd[--len] === 0;) xd.pop();
+
+  // Remove leading zeros and adjust exponent accordingly.
+  for (; xd[0] === 0; xd.shift()) --e;
+
+  // Zero?
+  if (!xd[0]) return new Ctor(0);
+
+  y.d = xd;
+  y.e = e;
+
+  //return external && xd.length >= pr / LOG_BASE ? round(y, pr) : y;
+  return external ? round(y, pr) : y;
+}
+
+
+function toString(x, isExp, sd) {
+  var k,
+    e = getBase10Exponent(x),
+    str = digitsToString(x.d),
+    len = str.length;
+
+  if (isExp) {
+    if (sd && (k = sd - len) > 0) {
+      str = str.charAt(0) + '.' + str.slice(1) + getZeroString(k);
+    } else if (len > 1) {
+      str = str.charAt(0) + '.' + str.slice(1);
+    }
+
+    str = str + (e < 0 ? 'e' : 'e+') + e;
+  } else if (e < 0) {
+    str = '0.' + getZeroString(-e - 1) + str;
+    if (sd && (k = sd - len) > 0) str += getZeroString(k);
+  } else if (e >= len) {
+    str += getZeroString(e + 1 - len);
+    if (sd && (k = sd - e - 1) > 0) str = str + '.' + getZeroString(k);
+  } else {
+    if ((k = e + 1) < len) str = str.slice(0, k) + '.' + str.slice(k);
+    if (sd && (k = sd - len) > 0) {
+      if (e + 1 === len) str += '.';
+      str += getZeroString(k);
+    }
+  }
+
+  return x.s < 0 ? '-' + str : str;
+}
+
+
+// Does not strip trailing zeros.
+function truncate(arr, len) {
+  if (arr.length > len) {
+    arr.length = len;
+    return true;
+  }
+}
+
+
+// Decimal methods
+
+
+/*
+ *  clone
+ *  config/set
+ */
+
+
+/*
+ * Create and return a Decimal constructor with the same configuration properties as this Decimal
+ * constructor.
+ *
+ */
+function clone(obj) {
+  var i, p, ps;
+
+  /*
+   * The Decimal constructor and exported function.
+   * Return a new Decimal instance.
+   *
+   * value {number|string|Decimal} A numeric value.
+   *
+   */
+  function Decimal(value) {
+    var x = this;
+
+    // Decimal called without new.
+    if (!(x instanceof Decimal)) return new Decimal(value);
+
+    // Retain a reference to this Decimal constructor, and shadow Decimal.prototype.constructor
+    // which points to Object.
+    x.constructor = Decimal;
+
+    // Duplicate.
+    if (value instanceof Decimal) {
+      x.s = value.s;
+      x.e = value.e;
+      x.d = (value = value.d) ? value.slice() : value;
+      return;
+    }
+
+    if (typeof value === 'number') {
+
+      // Reject Infinity/NaN.
+      if (value * 0 !== 0) {
+        throw Error(invalidArgument + value);
+      }
+
+      if (value > 0) {
+        x.s = 1;
+      } else if (value < 0) {
+        value = -value;
+        x.s = -1;
+      } else {
+        x.s = 0;
+        x.e = 0;
+        x.d = [0];
+        return;
+      }
+
+      // Fast path for small integers.
+      if (value === ~~value && value < 1e7) {
+        x.e = 0;
+        x.d = [value];
+        return;
+      }
+
+      return parseDecimal(x, value.toString());
+    } else if (typeof value !== 'string') {
+      throw Error(invalidArgument + value);
+    }
+
+    // Minus sign?
+    if (value.charCodeAt(0) === 45) {
+      value = value.slice(1);
+      x.s = -1;
+    } else {
+      x.s = 1;
+    }
+
+    if (isDecimal.test(value)) parseDecimal(x, value);
+    else throw Error(invalidArgument + value);
+  }
+
+  Decimal.prototype = P;
+
+  Decimal.ROUND_UP = 0;
+  Decimal.ROUND_DOWN = 1;
+  Decimal.ROUND_CEIL = 2;
+  Decimal.ROUND_FLOOR = 3;
+  Decimal.ROUND_HALF_UP = 4;
+  Decimal.ROUND_HALF_DOWN = 5;
+  Decimal.ROUND_HALF_EVEN = 6;
+  Decimal.ROUND_HALF_CEIL = 7;
+  Decimal.ROUND_HALF_FLOOR = 8;
+
+  Decimal.clone = clone;
+  Decimal.config = Decimal.set = config;
+
+  if (obj === void 0) obj = {};
+  if (obj) {
+    ps = ['precision', 'rounding', 'toExpNeg', 'toExpPos', 'LN10'];
+    for (i = 0; i < ps.length;) if (!obj.hasOwnProperty(p = ps[i++])) obj[p] = this[p];
+  }
+
+  Decimal.config(obj);
+
+  return Decimal;
+}
+
+
+/*
+ * Configure global settings for a Decimal constructor.
+ *
+ * `obj` is an object with one or more of the following properties,
+ *
+ *   precision  {number}
+ *   rounding   {number}
+ *   toExpNeg   {number}
+ *   toExpPos   {number}
+ *
+ * E.g. Decimal.config({ precision: 20, rounding: 4 })
+ *
+ */
+function config(obj) {
+  if (!obj || typeof obj !== 'object') {
+    throw Error(decimalError + 'Object expected');
+  }
+  var i, p, v,
+    ps = [
+      'precision', 1, MAX_DIGITS,
+      'rounding', 0, 8,
+      'toExpNeg', -1 / 0, 0,
+      'toExpPos', 0, 1 / 0
+    ];
+
+  for (i = 0; i < ps.length; i += 3) {
+    if ((v = obj[p = ps[i]]) !== void 0) {
+      if (mathfloor(v) === v && v >= ps[i + 1] && v <= ps[i + 2]) this[p] = v;
+      else throw Error(invalidArgument + p + ': ' + v);
+    }
+  }
+
+  if ((v = obj[p = 'LN10']) !== void 0) {
+      if (v == Math.LN10) this[p] = new this(v);
+      else throw Error(invalidArgument + p + ': ' + v);
+  }
+
+  return this;
+}
+
+
+// Create and configure initial Decimal constructor.
+var Decimal = clone(defaults);
+
+// Internal constant.
+ONE = new Decimal(1);
+
+var Decimal$1 = Decimal;
+
+export { Decimal, Decimal$1 as default };