@open-pioneer/map 1.4.0 → 1.5.0-dev.20260911123645

package/CHANGELOG.md

@@ -1,5 +1,50 @@
 # @open-pioneer/map
 
+## 1.5.0-dev.20260911123645
+
+### Minor Changes
+
+- f790fda: Update to Chakra 3.37.0
+- 38658ce: Add `setStyle` method to `Highlight` to change the style of existing highlights.
+- ebda251: The `addLayer` method now also accepts `at: "base"` to add a base layer.
+- ebda251: Add new properties for topmost layers and base layers in `MapConfig`.
+
+  - With `MapConfig.topmostLayers` topmost layers can now be defined in the initial map setup.
+  - Base layers can now be defined in the initial map setup with the `MapConfig.baseLayers` property
+
+  We recommend using the `baseLayers` property instead of `isBaseLayer: true` for new apps.
+
+  ```typescript
+  export class MapConfigProviderImpl implements MapConfigProvider {
+      mapId = MAP_ID;
+
+      async getMapConfig({ layerFactory }: MapConfigProviderOptions): Promise<MapConfig> {
+          return {
+              initialView: {...},
+              projection: "EPSG:25832",
+              baseLayers: [
+                  //all base layers
+                  layerFactory.create(...)
+              ],
+              layers: [
+                  //all other operational layers
+                  layerFactory.create(...),
+                  layerFactory.create(...)
+              ],
+              topmostLayers: [
+                  //all operational highlight layers
+                  layerFactory.create(...)
+              ]
+          };
+      }
+  }
+  ```
+
+### Patch Changes
+
+- 3203815: Update code to match new react linting rules from oxlint.
+- 09ec7c7: Updated dependencies
+
 ## 1.4.0
 
 ### Minor Changes
@@ -7,16 +52,16 @@
 - c30396d: Update Chakra to 3.36.1
 - 690a892: A layer's loadState is now a derived from three different channels:
 
-    - source — the OpenLayers source state (undefined/loading/ready/error).
-    - health — the result of the optional healthCheck (run once on attach).
-    - metadata — the result of a layer's own capabilities request (if any).
+  - source — the OpenLayers source state (undefined/loading/ready/error).
+  - health — the result of the optional healthCheck (run once on attach).
+  - metadata — the result of a layer's own capabilities request (if any).
 
-    Additionally, a new property `loadError` has been added to the layer class.
+  Additionally, a new property `loadError` has been added to the layer class.
 
 - e4b47f1: `useMapModel` now prints an error message if the map model could not be created.
   This error was previously returned and was easy to silently ignore.
 
-    Use the option `quiet: true` to suppress this error message.
+  Use the option `quiet: true` to suppress this error message.
 
 - c9b3ced: Provide reactive rotation in MapModel
 - 690a892: WMS Layer: add validation that configured sublayers actually exist in the service's capabilities.
@@ -45,17 +90,17 @@
 - fcbd505: Sanitize HTML used for layer attributions.
 - 33ab02f: Move highlight methods to `mapModel.highlights`.
 
-    - `mapModel.highlight()` -> `mapModel.highlights.add()`
-    - `mapModel.highlightAndZoom()` -> `mapModel.highlights.addAndZoom()`
-    - `mapModel.removeHighlights()` -> `mapModel.highlights.clear()`
+  - `mapModel.highlight()` -> `mapModel.highlights.add()`
+  - `mapModel.highlightAndZoom()` -> `mapModel.highlights.addAndZoom()`
+  - `mapModel.removeHighlights()` -> `mapModel.highlights.clear()`
 
-    The old methods on the Map Model have been deprecated and will be removed in a future major release.
+  The old methods on the Map Model have been deprecated and will be removed in a future major release.
 
 - d54ccfd: Update to Chakra UI 3.35.0
 - 33ab02f: Add new `mapModel.overlays` API to render arbitrary React content on the map at certain coordinates.
   This can be helpful for feature info, popups and for tooltips during map interactions.
 
-    Use `mapModel.overlay.add({ content: <SomeReactContent />, ...})` to create a new overlay.
+  Use `mapModel.overlay.add({ content: <SomeReactContent />, ...})` to create a new overlay.
 
 - 206b397: Update to trails core packages 4.6.0
 - 2ceb1ca: MapContainer: allow configuration of `rootProps` and `containerProps`.
@@ -94,22 +139,22 @@
   Using only a minimum or maximum limit is possible.
   Missing properties are considered as no limitation.
 
-    ```js
-    layerFactory.create({
-        type: WMTSLayer,
-        isBaseLayer: true,
-        title: "Basemap",
-        name: "basemap",
-        minZoom: 10,
-        maxZoom: 16
-    });
-    ```
+  ```js
+  layerFactory.create({
+    type: WMTSLayer,
+    isBaseLayer: true,
+    title: "Basemap",
+    name: "basemap",
+    minZoom: 10,
+    maxZoom: 16,
+  });
+  ```
 
-    The boolean property `visibleInScale` of a layer indicates the visibility of this layer depending on the current resolution of the map.
+  The boolean property `visibleInScale` of a layer indicates the visibility of this layer depending on the current resolution of the map.
 
-    Restrictions of a `GroupLayer` are inherited to child layers.
-    If no restrictions are configured for a child layer, its visibility limitations are equal to the parent `GroupLayer`.
-    By configuring additional limits for the child layer, its visibility can be further restricted.
+  Restrictions of a `GroupLayer` are inherited to child layers.
+  If no restrictions are configured for a child layer, its visibility limitations are equal to the parent `GroupLayer`.
+  By configuring additional limits for the child layer, its visibility can be further restricted.
 
 ### Patch Changes
 
@@ -122,233 +167,233 @@
 - b3709f1: **Breaking:** Remove layer constructor types from public API (e.g. `SimpleLayerConstructor`).
 - 9e9bc6e: **Breaking**: Internal layers are no longer returned from getters such as `getItems()` or `getRecursiveLayers()` by default.
 
-    A new option `includeInternalLayers` has been implemented to opt-in into internal layers.
-    By default, internal layers are not returned by functions like `getItems()` or `getRecursiveLayers()`.
-    If internal layer should be returned this must be specified explicitly with the `includeInternalLayers` option.
+  A new option `includeInternalLayers` has been implemented to opt-in into internal layers.
+  By default, internal layers are not returned by functions like `getItems()` or `getRecursiveLayers()`.
+  If internal layer should be returned this must be specified explicitly with the `includeInternalLayers` option.
 
-    ```js
-    import { MapModel } from "@open-pioneer/map";
+  ```js
+  import { MapModel } from "@open-pioneer/map";
 
-    //internal layers are not included
-    const layers = myMapModel.layers.getItems();
-    //include internal layers
-    const allLayers = myMapModel.layers.getItems({ includeInternalLayers: true });
-    ```
+  //internal layers are not included
+  const layers = myMapModel.layers.getItems();
+  //include internal layers
+  const allLayers = myMapModel.layers.getItems({ includeInternalLayers: true });
+  ```
 
-    Note that if internal layers are returned this includes system layers (e.g. for highlights or geolocation) that were not explicitly added to the map.
-    The described behavior is aligned for the functions `getItems()`, `getLayers()`, `getAllLayers()` and `getRecursiveLayers()` in `LayerCollection`, `WMSLayer` and `GroupLayer`.
-    The function `getRecursiveLayers()` does not return non-internal child layers of an internal layer.
+  Note that if internal layers are returned this includes system layers (e.g. for highlights or geolocation) that were not explicitly added to the map.
+  The described behavior is aligned for the functions `getItems()`, `getLayers()`, `getAllLayers()` and `getRecursiveLayers()` in `LayerCollection`, `WMSLayer` and `GroupLayer`.
+  The function `getRecursiveLayers()` does not return non-internal child layers of an internal layer.
 
 - b3709f1: **Breaking:** Remove old event API from layer types and the map model.
 
-    These were only used for the `"destroy"` event.
+  These were only used for the `"destroy"` event.
 
-    ```ts
-    // OLD, removed API:
-    const layer = ...;
-    layer.on("destroyed", () => {
-        console.debug("layer was destroyed");
-    });
-    ```
+  ```ts
+  // OLD, removed API:
+  const layer = ...;
+  layer.on("destroyed", () => {
+      console.debug("layer was destroyed");
+  });
+  ```
 
-    The destroy event still exists, but is now based on the event system of the [reactivity API](https://github.com/conterra/reactivity/tree/main/packages/reactivity-events):
+  The destroy event still exists, but is now based on the event system of the [reactivity API](https://github.com/conterra/reactivity/tree/main/packages/reactivity-events):
 
-    ```ts
-    // NEW
-    import { on } from "@conterra/reactivity-events";
+  ```ts
+  // NEW
+  import { on } from "@conterra/reactivity-events";
 
-    const layer = ...;
-    on(layer.destroyed, () => {
-        console.debug("layer was destroyed");
-    });
+  const layer = ...;
+  on(layer.destroyed, () => {
+      console.debug("layer was destroyed");
+  });
 
-    const mapModel = ...;
-    on(mapModel.destroyed, () => {
-        console.debug("layer was destroyed");
-    });
-    ```
+  const mapModel = ...;
+  on(mapModel.destroyed, () => {
+      console.debug("layer was destroyed");
+  });
+  ```
 
 - a1614de: **Breaking**: Remove support for `mapId` in all React components.
 
-    To configure the map for a component (for example: `Legend`), either pass the `map`
-    as an explicit parameter or use the `DefaultMapProvider`:
+  To configure the map for a component (for example: `Legend`), either pass the `map`
+  as an explicit parameter or use the `DefaultMapProvider`:
 
-    ```ts
-    // Explicit API
-    <Legend map={map} />
+  ```ts
+  // Explicit API
+  <Legend map={map} />
 
-    // All children of the DefaultMapProvider can use the configured map
-    <DefaultMapProvider map={map}>
-        <MapContainer />
-        <Legend />
-        <SomeOtherComponent />
-    </DefaultMapProvider>;
-    ```
+  // All children of the DefaultMapProvider can use the configured map
+  <DefaultMapProvider map={map}>
+      <MapContainer />
+      <Legend />
+      <SomeOtherComponent />
+  </DefaultMapProvider>;
+  ```
 
-    Support for `mapId` was removed in [PR #486](https://github.com/open-pioneer/trails-openlayers-base-packages/pull/486).
+  Support for `mapId` was removed in [PR #486](https://github.com/open-pioneer/trails-openlayers-base-packages/pull/486).
 
 ### Minor Changes
 
 - 29a10df: Support buffer for zoom geometries.
   Use the `buffer` option to specify the size increase. E.g. `0.1` for 10% size increase.
 
-    We use the already existing `calculateBufferedExtent` function to compute the buffer.
+  We use the already existing `calculateBufferedExtent` function to compute the buffer.
 
-    For example:
+  For example:
 
-    ```ts
-    const map: MapModel = ...;
-    const highlight = map.highlightAndZoom(someGeometries, {
-        // Grows extent by 10%
-        buffer: 0.1
-    });
-    ```
+  ```ts
+  const map: MapModel = ...;
+  const highlight = map.highlightAndZoom(someGeometries, {
+      // Grows extent by 10%
+      buffer: 0.1
+  });
+  ```
 
 - 2702df4: Introduce `internal` property for all layer types (including sublayers).
   If `internal` is `true` (default: `false`) the layer is not considered by any UI widget (e.g. Legend and Toc).
   The `internal` state of a layer is not to be confused with the layer's visibility on the map which is determined by the `visible` property.
 
-    ```typescript
-    //internal layer is visible on the map but hidden in UI elements like legend and Toc
-    const internalLayer = new SimpleLayer({
-        id: "layer1",
-        title: "layer 1",
-        olLayer: myOlLayer,
-        visible: true,
-        internal: true
-    });
-    ```
+  ```typescript
+  //internal layer is visible on the map but hidden in UI elements like legend and Toc
+  const internalLayer = new SimpleLayer({
+    id: "layer1",
+    title: "layer 1",
+    olLayer: myOlLayer,
+    visible: true,
+    internal: true,
+  });
+  ```
 
 - 5df900f: Add a new hook `useMapModelValue(props?)`.
   The hook returns either the directly configured `map` (via props) or the default map from a parent `DefaultMapProvider`.
   If neither is present, an error will be thrown.
 
-    This hook is used in all components that work with the map.
-    The typical usage works like this:
+  This hook is used in all components that work with the map.
+  The typical usage works like this:
 
-    ```ts
-    import { MapModelProps, useMapModelValue } from "@open-pioneer/map";
+  ```ts
+  import { MapModelProps, useMapModelValue } from "@open-pioneer/map";
 
-    // optional `map` property inherited from `MapModelProps`
-    export interface MyComponentProps extends MapModelProps {
-        // ... other properties
-    }
+  // optional `map` property inherited from `MapModelProps`
+  export interface MyComponentProps extends MapModelProps {
+    // ... other properties
+  }
 
-    export function MyComponent(props) {
-        const map = useMapModelValue(props); // looks up the map
-    }
-    ```
+  export function MyComponent(props) {
+    const map = useMapModelValue(props); // looks up the map
+  }
+  ```
 
-    You can also call this hook without any arguments:
+  You can also call this hook without any arguments:
 
-    ```ts
-    // Map model from DefaultMapProvider or an error.
-    const mapModel = useMapModelValue();
-    ```
+  ```ts
+  // Map model from DefaultMapProvider or an error.
+  const mapModel = useMapModelValue();
+  ```
 
-    This hook should replace _most_ usages `useMapModel`, which can't return the map model directly since it may not have finished construction yet.
+  This hook should replace _most_ usages `useMapModel`, which can't return the map model directly since it may not have finished construction yet.
 
 - 14c484e: Introduce the `LayerFactory` service (interface `"map.LayerFactory"`).
 
-    The layer factory should be used to construct new layer instances, instead of calling the layer constructor directly.
-    Calling the constructor directly (e.g. `new SimpleLayer`) is deprecated (but still fully supported).
-
-    For example:
-
-    ```ts
-    // OLD
-    new SimpleLayer({
-        title: "OSM",
-        isBaseLayer: true,
-        olLayer: new TileLayer({
-            source: new OSM()
-        })
-    });
-    ```
-
-    ```ts
-    // NEW
-    const layerFactory = ...; // injected
-    layerFactory.create({
-        type: SimpleLayer,
-        title: "OSM",
-        isBaseLayer: true,
-        olLayer: new TileLayer({
-            source: new OSM()
-        })
-    });
-    ```
-
-    This was done to support passing hidden dependencies from the layer factory to the layer instance (such as the `HttpService`),
-    without forcing the user to supply these dependencies manually.
-
-    The `MapConfigProvider` has been updated as well.
-    The `getMapConfig` method will now receive the layer factory as an option.
-    This makes it easy to migrate to the new API:
-
-    ```diff
-    # Example MapConfigProvider
-    export class MapConfigProviderImpl implements MapConfigProvider {
-        mapId = MAP_ID;
-
-    -   async getMapConfig(): Promise<MapConfig> {
-    +   async getMapConfig({ layerFactory }: MapConfigProviderOptions): Promise<MapConfig> {
-            return {
-                initialView: {
-                    kind: "position",
-                    center: { x: 404747, y: 5757920 },
-                    zoom: 14
-                },
-                layers: [
-    -               new SimpleLayer({
-    +               layerFactory.create({
-    +                   type: SimpleLayer,
-                        title: "OSM",
-                        isBaseLayer: true,
-                        olLayer: new TileLayer({
-                            source: new OSM()
-                        })
-                    })
-                ]
-            };
-        }
-    }
-    ```
+  The layer factory should be used to construct new layer instances, instead of calling the layer constructor directly.
+  Calling the constructor directly (e.g. `new SimpleLayer`) is deprecated (but still fully supported).
+
+  For example:
+
+  ```ts
+  // OLD
+  new SimpleLayer({
+    title: "OSM",
+    isBaseLayer: true,
+    olLayer: new TileLayer({
+      source: new OSM(),
+    }),
+  });
+  ```
+
+  ```ts
+  // NEW
+  const layerFactory = ...; // injected
+  layerFactory.create({
+      type: SimpleLayer,
+      title: "OSM",
+      isBaseLayer: true,
+      olLayer: new TileLayer({
+          source: new OSM()
+      })
+  });
+  ```
+
+  This was done to support passing hidden dependencies from the layer factory to the layer instance (such as the `HttpService`),
+  without forcing the user to supply these dependencies manually.
+
+  The `MapConfigProvider` has been updated as well.
+  The `getMapConfig` method will now receive the layer factory as an option.
+  This makes it easy to migrate to the new API:
+
+  ```diff
+  # Example MapConfigProvider
+  export class MapConfigProviderImpl implements MapConfigProvider {
+      mapId = MAP_ID;
+
+  -   async getMapConfig(): Promise<MapConfig> {
+  +   async getMapConfig({ layerFactory }: MapConfigProviderOptions): Promise<MapConfig> {
+          return {
+              initialView: {
+                  kind: "position",
+                  center: { x: 404747, y: 5757920 },
+                  zoom: 14
+              },
+              layers: [
+  -               new SimpleLayer({
+  +               layerFactory.create({
+  +                   type: SimpleLayer,
+                      title: "OSM",
+                      isBaseLayer: true,
+                      olLayer: new TileLayer({
+                          source: new OSM()
+                      })
+                  })
+              ]
+          };
+      }
+  }
+  ```
 
 - aeb9000: Add new `"topmost"` option to add layers that are always displayed on top (above all other layers).
 
-    A new layers can be added at `topmost` to ensure that this layer will always be displayed on top of the other layers.
-    This can be used, for example, to implement highlights or to draw graphics.
-    Layers added at `"topmost"` will always be shown above layers at `"top"`.
+  A new layers can be added at `topmost` to ensure that this layer will always be displayed on top of the other layers.
+  This can be used, for example, to implement highlights or to draw graphics.
+  Layers added at `"topmost"` will always be shown above layers at `"top"`.
 
-    When using the `"above"` or `"below"` options with a `"topmost"` reference layer, that layer becomes `"topmost"` as well.
+  When using the `"above"` or `"below"` options with a `"topmost"` reference layer, that layer becomes `"topmost"` as well.
 
-    ```typescript
-    import { MapModel, SimpleLayer } from "@open-pioneer/map";
+  ```typescript
+  import { MapModel, SimpleLayer } from "@open-pioneer/map";
 
-    const highlightLayer = new SimpleLayer({
-        title: "highlights",
-        olLayer: myOlLayer
-    });
-    //always displayed at the top
-    myMapModel.layers.addLayer(highlightLayer, { at: "topmost" });
-    ```
+  const highlightLayer = new SimpleLayer({
+    title: "highlights",
+    olLayer: myOlLayer,
+  });
+  //always displayed at the top
+  myMapModel.layers.addLayer(highlightLayer, { at: "topmost" });
+  ```
 
 - 5df900f: Deprecate the parameter-less signature of `useMapModel()`:
 
-    ```ts
-    // Returns the DefaultMapProvider's map, but wrapped in a result value (loading/resolved/rejected)
-    const result = useMapModel();
-    ```
+  ```ts
+  // Returns the DefaultMapProvider's map, but wrapped in a result value (loading/resolved/rejected)
+  const result = useMapModel();
+  ```
 
-    Use `useMapModelValue()` instead:
+  Use `useMapModelValue()` instead:
 
-    ```ts
-    // Returns the map model directly.
-    const mapModel = useMapModelValue();
-    ```
+  ```ts
+  // Returns the map model directly.
+  const mapModel = useMapModelValue();
+  ```
 
-    All other signatures of `useMapModel()` are still fully supported.
+  All other signatures of `useMapModel()` are still fully supported.
 
 - 773fa2d: The map now has an appropriate focus outline style by default, which respects the map view's padding.
   For information on disabling this behavior, see the map package documentation.
@@ -366,8 +411,8 @@
 - 4f1e7bd: The internal constant `TOPMOST_LAYER_Z` has been removed.
   To configure a layer that is always on top:
 
-    - Create a layer using the `LayerFactory`
-    - Add it to the map model and specify the `at: "topmost"` option
+  - Create a layer using the `LayerFactory`
+  - Add it to the map model and specify the `at: "topmost"` option
 
 - 2c8b617: Introduce `MapRegistry.createMapModel` method to create a `MapModel` without a `MapConfigProvider`.
   For more details, see [PR](https://github.com/open-pioneer/trails-openlayers-base-packages/pull/499) and [issue](https://github.com/open-pioneer/trails-openlayers-base-packages/issues/483).
@@ -382,13 +427,13 @@
 - 66179bc: Update to core-packages v4.0.0
 - acd5115: **Breaking:** Remove the following hooks, which were deprecated since version 0.8.0:
 
-    - useView
-    - useProjection
-    - useResolution
-    - useCenter
-    - useScale
+  - useView
+  - useProjection
+  - useResolution
+  - useCenter
+  - useScale
 
-    Use reactive properties on the map model instead, e.g. `mapModel.scale`.
+  Use reactive properties on the map model instead, e.g. `mapModel.scale`.
 
 - 738390e: Update to Chakra v3
 
@@ -396,30 +441,30 @@
 
 - 738390e: Fix an issue with "raw" map container children that are not wrapped in a map anchor.
 
-    Consider, for example, the following snippet:
+  Consider, for example, the following snippet:
 
-    ```tsx
-    <MapContainer>
-        {/* .custom-content does absolute positioning relative to map container */}
-        <div className="custom-content">Hi</div>
-    </MapContainer>
-    ```
+  ```tsx
+  <MapContainer>
+    {/* .custom-content does absolute positioning relative to map container */}
+    <div className="custom-content">Hi</div>
+  </MapContainer>
+  ```
 
-    Previously, the `div` was rendered relative to the map container div but did _not_ respect the map's view padding.
-    Now the `div` will move according to the map padding as well.
+  Previously, the `div` was rendered relative to the map container div but did _not_ respect the map's view padding.
+  Now the `div` will move according to the map padding as well.
 
 - 0a8ff71: The default attribution widget created for the map now has `role="region"` and an `aria-label` for improved screen reader support.
 
-    ```html
-    <div
-        style="pointer-events: auto;"
-        class="ol-attribution ol-unselectable ol-control ol-uncollapsible"
-        role="region"
-        aria-label="Quellenangaben"
-    >
-        <!-- Attributions -->
-    </div>
-    ```
+  ```html
+  <div
+    style="pointer-events: auto;"
+    class="ol-attribution ol-unselectable ol-control ol-uncollapsible"
+    role="region"
+    aria-label="Quellenangaben"
+  >
+    <!-- Attributions -->
+  </div>
+  ```
 
 ## 0.10.0
 
@@ -428,82 +473,82 @@
 - 193068a: Deprecate the `mapId` property on React components.
   Use the `MapModel` directly instead to pass a reference to the map.
 
-    Example:
+  Example:
 
-    ```tsx
-    // Default map for entire component tree
-    <DefaultMapProvider map={mapModel}>
-        <Toc />
-    </DefaultMapProvider>
+  ```tsx
+  // Default map for entire component tree
+  <DefaultMapProvider map={mapModel}>
+      <Toc />
+  </DefaultMapProvider>
 
-    // Map for specific component
-    <Toc map={mapModel} />
-    ```
+  // Map for specific component
+  <Toc map={mapModel} />
+  ```
 
 ### Patch Changes
 
 - 2bafdad: Top level operational layers can now be inserted at an arbitrary position.
 
-    ```ts
-    const mapModel = ...;
-    const newLayer = new SimpleLayer({
-        title: "New layer",
-        // ...
-    });
+  ```ts
+  const mapModel = ...;
+  const newLayer = new SimpleLayer({
+      title: "New layer",
+      // ...
+  });
 
-    mapModel.layers.addLayer(newLayer, { at: "top" }); // Same as default: on top of all existing operational layers
-    mapModel.layers.addLayer(newLayer, { at: "bottom" }); // Below all other operational layers
+  mapModel.layers.addLayer(newLayer, { at: "top" }); // Same as default: on top of all existing operational layers
+  mapModel.layers.addLayer(newLayer, { at: "bottom" }); // Below all other operational layers
 
-    const otherLayer = ...; // Eiter a valid layer id or a layer instance. Must be from the same collection.
-    mapModel.layers.addLayer(newLayer, { at: "above", reference: otherLayer }); // Above the reference layer
-    mapModel.layers.addLayer(newLayer, { at: "below", reference: otherLayer }); // Below the reference layer
-    ```
+  const otherLayer = ...; // Eiter a valid layer id or a layer instance. Must be from the same collection.
+  mapModel.layers.addLayer(newLayer, { at: "above", reference: otherLayer }); // Above the reference layer
+  mapModel.layers.addLayer(newLayer, { at: "below", reference: otherLayer }); // Below the reference layer
+  ```
 
 - cd1435b: Update ol to 10.5.0
 - 032eed7: Bump dependencies.
 - cd1435b: Update to react 19.1.0
 - 7558df4: Add new map anchor positioning options.
 
-    The following positions are now supported:
-
-    ```ts
-    export type MapAnchorPosition =
-        | "manual"
-        | "top-left"
-        | "top-right"
-        | "top-center"
-        | "bottom-left"
-        | "bottom-right"
-        | "bottom-center"
-        | "left-center"
-        | "right-center"
-        | "center";
-    ```
-
-    You can use `manual` positioning to position an anchor using CSS.
-    For example:
-
-    ```tsx
-    <MapAnchor className="manual-position" position="manual">
-        <Box
-            backgroundColor="whiteAlpha.800"
-            borderWidth="1px"
-            borderRadius="lg"
-            padding={2}
-            boxShadow="lg"
-        >
-            Manually positioned anchor
-        </Box>
-    ```
-
-    Combined with css:
-
-    ```css
-    .manual-position {
-        left: 200px;
-        top: 200px;
-    }
-    ```
+  The following positions are now supported:
+
+  ```ts
+  export type MapAnchorPosition =
+    | "manual"
+    | "top-left"
+    | "top-right"
+    | "top-center"
+    | "bottom-left"
+    | "bottom-right"
+    | "bottom-center"
+    | "left-center"
+    | "right-center"
+    | "center";
+  ```
+
+  You can use `manual` positioning to position an anchor using CSS.
+  For example:
+
+  ```tsx
+  <MapAnchor className="manual-position" position="manual">
+      <Box
+          backgroundColor="whiteAlpha.800"
+          borderWidth="1px"
+          borderRadius="lg"
+          padding={2}
+          boxShadow="lg"
+      >
+          Manually positioned anchor
+      </Box>
+  ```
+
+  Combined with css:
+
+  ```css
+  .manual-position {
+    left: 200px;
+    top: 200px;
+  }
+  ```
 
 ## 0.9.0
 
@@ -511,8 +556,8 @@
 
 - e7fdc5d: improve scale calculation for none-metric projections
 
-    Fix scale calculation for projections with none-metric units (e.g. EPSG:4326).
-    Note: The calculated scale (`useScale`) still may deviate from the desired scale (`setScale`) for non-metric projections. This is due to limitiations in the [getPointResolution](https://openlayers.org/en/latest/apidoc/module-ol_proj.html#.getPointResolution) function from OL.
+  Fix scale calculation for projections with none-metric units (e.g. EPSG:4326).
+  Note: The calculated scale (`useScale`) still may deviate from the desired scale (`setScale`) for non-metric projections. This is due to limitiations in the [getPointResolution](https://openlayers.org/en/latest/apidoc/module-ol_proj.html#.getPointResolution) function from OL.
 
 - cb94c75: update dependencies
 - f327eec: Deprecate `mapModel.layers.getAllLayers()`.
@@ -520,43 +565,43 @@
   The name of `getAllLayers()` is misleading because it does not recurse into nested layers.
 - f327eec: Add function `getRecursiveLayers()` to `LayerCollection`, `SublayerCollection` and `GroupLayerCollection` in `@open-pioneer/map`
 
-    Compared to `getLayers` and `getOperationalLayers`, `getRecursiveLayer` returns all (nested) child and sub layers of a collection.
-    The property `options.filter` can be used to exclude layers (and their child layers) from the result. For `LayerCollection`, `getRecursiveLayers()` provides the predefined filters `base` and `operational` to return either base layers or operation layers only.
-
-    The function might be costly if the hierarchy of layers is deeply nested because the layer tree has to be traversed recursively.
-    In some scenarios using `options.filter` could be used to improve the performance because it is not necessary to traverse the layer tree completely if some layers are excluded.
-
-    Example (using GroupLayerCollection):
-
-    ```typescript
-    const grouplayer = new GroupLayer({
-        id: "group",
-        title: "group test",
+  Compared to `getLayers` and `getOperationalLayers`, `getRecursiveLayer` returns all (nested) child and sub layers of a collection.
+  The property `options.filter` can be used to exclude layers (and their child layers) from the result. For `LayerCollection`, `getRecursiveLayers()` provides the predefined filters `base` and `operational` to return either base layers or operation layers only.
+
+  The function might be costly if the hierarchy of layers is deeply nested because the layer tree has to be traversed recursively.
+  In some scenarios using `options.filter` could be used to improve the performance because it is not necessary to traverse the layer tree completely if some layers are excluded.
+
+  Example (using GroupLayerCollection):
+
+  ```typescript
+  const grouplayer = new GroupLayer({
+    id: "group",
+    title: "group test",
+    layers: [
+      new SimpleLayer({
+        id: "member",
+        title: "group member",
+        olLayer: olLayer1,
+      }),
+      new GroupLayer({
+        id: "subgroup",
+        title: "subgroup test",
         layers: [
-            new SimpleLayer({
-                id: "member",
-                title: "group member",
-                olLayer: olLayer1
-            }),
-            new GroupLayer({
-                id: "subgroup",
-                title: "subgroup test",
-                layers: [
-                    new SimpleLayer({
-                        id: "subgroupmember",
-                        title: "subgroup member",
-                        olLayer: olLayer2
-                    })
-                ]
-            })
-        ]
-    });
-
-    // Returns only the layer "member" because the provided filter function excludes "subgroup" and (implicitly) its child "subgroupmember".
-    const layers = grouplayer.layers.getRecursiveLayers({
-        filter: (layer) => layer.id !== "subgroup"
-    });
-    ```
+          new SimpleLayer({
+            id: "subgroupmember",
+            title: "subgroup member",
+            olLayer: olLayer2,
+          }),
+        ],
+      }),
+    ],
+  });
+
+  // Returns only the layer "member" because the provided filter function excludes "subgroup" and (implicitly) its child "subgroupmember".
+  const layers = grouplayer.layers.getRecursiveLayers({
+    filter: (layer) => layer.id !== "subgroup",
+  });
+  ```
 
 ### Patch Changes
 
@@ -564,23 +609,23 @@
   This allows specifying the type of the `properties` attribute.
   The default type is `Readonly<Record<string, unknown>>` for backwards compatibility.
 
-    Example:
+  Example:
 
-    ```ts
-    interface MyFeatureProperties {
-        name: string;
-    }
+  ```ts
+  interface MyFeatureProperties {
+    name: string;
+  }
 
-    const feature: BaseFeature<MyFeatureProperties> = {
-        id: 123,
-        properties: {
-            name: "Example Feature"
-        }
-    };
+  const feature: BaseFeature<MyFeatureProperties> = {
+    id: 123,
+    properties: {
+      name: "Example Feature",
+    },
+  };
 
-    // string | undefined instead of `unknown`
-    const name = feature.properties?.name;
-    ```
+  // string | undefined instead of `unknown`
+  const name = feature.properties?.name;
+  ```
 
 - 32ed2cd: Fix `mapModel.layers.getLayerById()` not being reactive (#400).
 - 209eb8e: Added a configuration option to disable fetching of WMS service capabilities.
@@ -594,126 +639,126 @@
 - e7978a8: **Breaking:** Remove most events from the map model and the layer interfaces.
   All events that were merely used to synchronized state (e.g. `changed:title` etc.) have been removed.
 
-    The map model and related objects (layers, layer collections, etc.) are now based on the [Reactivity API](https://github.com/conterra/reactivity/blob/main/packages/reactivity-core/README.md).
-    This change greatly simplifies the code that is necessary to access up-to-date values and to react to changes.
+  The map model and related objects (layers, layer collections, etc.) are now based on the [Reactivity API](https://github.com/conterra/reactivity/blob/main/packages/reactivity-core/README.md).
+  This change greatly simplifies the code that is necessary to access up-to-date values and to react to changes.
 
-    For example, from inside a React component, you can now write:
+  For example, from inside a React component, you can now write:
 
-    ```jsx
-    import { useReactiveSnapshot } from "@open-pioneer/reactivity";
+  ```jsx
+  import { useReactiveSnapshot } from "@open-pioneer/reactivity";
 
-    function YourComponent() {
-        // Always up to date, even if the layer's title changes.
-        // No more need to listen to events.
-        const title = useReactiveSnapshot(() => layer.title, [layer]);
-        return <div>{title}</div>;
-    }
-    ```
+  function YourComponent() {
+    // Always up to date, even if the layer's title changes.
+    // No more need to listen to events.
+    const title = useReactiveSnapshot(() => layer.title, [layer]);
+    return <div>{title}</div>;
+  }
+  ```
 
-    And inside a normal JavaScript function, you can watch for changes like this:
+  And inside a normal JavaScript function, you can watch for changes like this:
 
-    ```js
-    import { watch } from "@conterra/reactivity-core";
+  ```js
+  import { watch } from "@conterra/reactivity-core";
 
-    const watchHandle = watch(
-        () => [layer.title],
-        ([newTitle]) => {
-            console.log("The title changed to", newTitle);
-        }
-    );
+  const watchHandle = watch(
+    () => [layer.title],
+    ([newTitle]) => {
+      console.log("The title changed to", newTitle);
+    }
+  );
 
-    // Later, cleanup:
-    watchHandle.destroy();
-    ```
+  // Later, cleanup:
+  watchHandle.destroy();
+  ```
 
-    For more details, check the [Reactivity API documentation](https://github.com/conterra/reactivity/blob/main/packages/reactivity-core/README.md).
+  For more details, check the [Reactivity API documentation](https://github.com/conterra/reactivity/blob/main/packages/reactivity-core/README.md).
 
 - 7ae9f90: Add new `children` property to all layers.
   This property makes it possible to handle any layer children in a generic fashion, regardless of the layer's actual type.
 
-    `layer.children` is either an alias of `layer.sublayers` (if the layer has sublayers), `layer.layers` (if it's a `GroupLayer`) or undefined, if the layer does not have any children.
+  `layer.children` is either an alias of `layer.sublayers` (if the layer has sublayers), `layer.layers` (if it's a `GroupLayer`) or undefined, if the layer does not have any children.
 
 - d8337a6: The following hooks are deprecated and will be removed in a future release:
 
-    - `useView`
-    - `useProjection`
-    - `useResolution`
-    - `useCenter`
-    - `useScale`
+  - `useView`
+  - `useProjection`
+  - `useResolution`
+  - `useCenter`
+  - `useScale`
 
-    They can all be replaced by using the new reactive properties on the `MapModel`, for example:
+  They can all be replaced by using the new reactive properties on the `MapModel`, for example:
 
-    ```javascript
-    // old:
-    const center = useCenter(olMap);
+  ```javascript
+  // old:
+  const center = useCenter(olMap);
 
-    // new:
-    const center = useReactiveSnapshot(() => mapModel.center, [mapModel]);
-    ```
+  // new:
+  const center = useReactiveSnapshot(() => mapModel.center, [mapModel]);
+  ```
 
 - 2fa8020: Update trails core package dependencies.
 
-    - Also updates Chakra UI to the latest 2.x version and Chakra React Select to version 5.
-    - Removes any obsolete references to `@chakra-ui/system`.
-      This dependency seems to be no longer required and may lead to duplicate packages in your dependency tree.
+  - Also updates Chakra UI to the latest 2.x version and Chakra React Select to version 5.
+  - Removes any obsolete references to `@chakra-ui/system`.
+    This dependency seems to be no longer required and may lead to duplicate packages in your dependency tree.
 
 - 7ae9f90: Add new layer type `GroupLayer` to to the Map API.
 
-    A `GroupLayer` contains a list of `Layer` (e.g. `SimpleLayer` or `WMSLayer`). Because `GroupLayer` is a `Layer` as well nested groups are supported.
-    The child layers of a `GroupLayer` can be accessed with the `layers` property - `layers` is `undefined` if it is not a group.
-    The parent `GroupLayer` of a child layer can be accessed with the `parent` property - `parent` is `undefined` if this layer is not part of a group (or not a sublayer).
-
-    ```js
-    const olLayer1 = new TileLayer({
-      source: new OSM(),
-    });
-    const olLayer2 = new TileLayer({
-      source: new BkgTopPlusOpen(),
-    });
-
-    // Create group layer with nested sub group
-    const group = new GroupLayer({
-      id: "group",
-      title: "a group layer",
-      layers: [
-        new SimpleLayer({
-          id: "member",
-          title: "group member",
-          olLayer: olLayer1,
-        }),
-        new GroupLayer({
-          id: "subgroup",
-          title: "a nested group layer",
-          layers: [
-            new SimpleLayer({
-              id: "submember",
-              title: "subgroup member",
-              olLayer: olLayer2,
-            }),
-          ],
-        }),
-      ],
-    });
-
-    const childLayers: GroupLayerCollection = group.layers; // Access child layers
-    ```
-
-    Layers can only be added to a single group or map.
-    Sublayers (e.g. `WMSSublayer`) cannot be added to a group directly.
+  A `GroupLayer` contains a list of `Layer` (e.g. `SimpleLayer` or `WMSLayer`). Because `GroupLayer` is a `Layer` as well nested groups are supported.
+  The child layers of a `GroupLayer` can be accessed with the `layers` property - `layers` is `undefined` if it is not a group.
+  The parent `GroupLayer` of a child layer can be accessed with the `parent` property - `parent` is `undefined` if this layer is not part of a group (or not a sublayer).
+
+  ```js
+  const olLayer1 = new TileLayer({
+    source: new OSM(),
+  });
+  const olLayer2 = new TileLayer({
+    source: new BkgTopPlusOpen(),
+  });
+
+  // Create group layer with nested sub group
+  const group = new GroupLayer({
+    id: "group",
+    title: "a group layer",
+    layers: [
+      new SimpleLayer({
+        id: "member",
+        title: "group member",
+        olLayer: olLayer1,
+      }),
+      new GroupLayer({
+        id: "subgroup",
+        title: "a nested group layer",
+        layers: [
+          new SimpleLayer({
+            id: "submember",
+            title: "subgroup member",
+            olLayer: olLayer2,
+          }),
+        ],
+      }),
+    ],
+  });
+
+  const childLayers: GroupLayerCollection = group.layers; // Access child layers
+  ```
+
+  Layers can only be added to a single group or map.
+  Sublayers (e.g. `WMSSublayer`) cannot be added to a group directly.
 
 - d8337a6: Provide new reactive properties on the `MapModel` type.
 
-    - `olView` (-> `olMap.getView()`)
-    - `projection` (-> `olMap.getView().getProjection()`)
-    - `resolution` (-> `olMap.getView().getResolution()`)
-    - `zoomLevel` (-> `olMap.getView().getZoom()`)
-    - `center` (-> `olMap.getView().getCenter()`)
-    - `scale` (derived from center and resolution)
+  - `olView` (-> `olMap.getView()`)
+  - `projection` (-> `olMap.getView().getProjection()`)
+  - `resolution` (-> `olMap.getView().getResolution()`)
+  - `zoomLevel` (-> `olMap.getView().getZoom()`)
+  - `center` (-> `olMap.getView().getCenter()`)
+  - `scale` (derived from center and resolution)
 
-    Most of the listed properties are already available on raw OpenLayers objects (see code in parentheses above).
-    However, those OpenLayers properties require manual work for synchronization, whereas the new properties are reactive (and can be watched, for example, using `useReactiveSnapshot()`).
+  Most of the listed properties are already available on raw OpenLayers objects (see code in parentheses above).
+  However, those OpenLayers properties require manual work for synchronization, whereas the new properties are reactive (and can be watched, for example, using `useReactiveSnapshot()`).
 
-    A new method `setScale()` has also been added to the model.
+  A new method `setScale()` has also been added to the model.
 
 ### Patch Changes
 
@@ -727,45 +772,45 @@
 
 - 2502050: Introduce union types and `type` attributes for layers. This allows TypeScript narrowing for layers and determining a layer's type.
 
-    The `Layer` and `Sublayer` types for layers remain, but are unions of the corresponding concrete layer types now.
-    The layer type `LayerBase` has been removed and is replaced by `AnyLayerType`
-    to clarify that this type represents a union of all types of layer (currently `Layer` and `Sublayer`).
+  The `Layer` and `Sublayer` types for layers remain, but are unions of the corresponding concrete layer types now.
+  The layer type `LayerBase` has been removed and is replaced by `AnyLayerType`
+  to clarify that this type represents a union of all types of layer (currently `Layer` and `Sublayer`).
 
-    Two type guards have been implemented that allow to check if a layer instance is a `Layer` or `Sublayer`: `isLayer()`and `isSublayer()` (see example below).
+  Two type guards have been implemented that allow to check if a layer instance is a `Layer` or `Sublayer`: `isLayer()`and `isSublayer()` (see example below).
 
-    The following `type` attribute values have been implemented at the layers:
+  The following `type` attribute values have been implemented at the layers:
 
-    - SimpleLayer: `simple`
-    - WMSLayer: `wms`
-    - WMSSubLayer: `wms-sublayer`
-    - WMTSLayer: `wmts`
+  - SimpleLayer: `simple`
+  - WMSLayer: `wms`
+  - WMSSubLayer: `wms-sublayer`
+  - WMTSLayer: `wmts`
 
-    Example of usage:
+  Example of usage:
 
-    ```ts
-    import { AnyLayer, WMTSLayer, isSublayer } from "@open-pioneer/map";
+  ```ts
+  import { AnyLayer, WMTSLayer, isSublayer } from "@open-pioneer/map";
 
-    export class ExampleClass {
-        //...
+  export class ExampleClass {
+    //...
 
-        exampleFunction(layer: AnyLayer) {
-            // prop may be a layer of any type
+    exampleFunction(layer: AnyLayer) {
+      // prop may be a layer of any type
 
-            // use layers type attribute to check layer type
-            if (layer.type === "wmts") {
-                layer.matrixSet; // prop only available on WMTSLayer
+      // use layers type attribute to check layer type
+      if (layer.type === "wmts") {
+        layer.matrixSet; // prop only available on WMTSLayer
 
-                const wmtsLayer: WMTSLayer = layer; // type of layer is now narrowed to `WMTSLayer`
-            }
+        const wmtsLayer: WMTSLayer = layer; // type of layer is now narrowed to `WMTSLayer`
+      }
 
-            // use new type guard to check if layer is a Sublayer
-            if (isSublayer(layer)) {
-                // type of layer is now narrowed to `WMSSublayer` (as it is currently the only type of Sublayer existing)
-                layer.parentLayer; // prop only available on Sublayers
-            }
-        }
+      // use new type guard to check if layer is a Sublayer
+      if (isSublayer(layer)) {
+        // type of layer is now narrowed to `WMSSublayer` (as it is currently the only type of Sublayer existing)
+        layer.parentLayer; // prop only available on Sublayers
+      }
     }
-    ```
+  }
+  ```
 
 - 310800c: Switch from `peerDependencies` to normal `dependencies`. Peer dependencies have some usability problems when used at scale.
 
@@ -775,7 +820,7 @@
 - 583f1d6: The `mapId` or `map` properties are now optional on individual components.
   You can use the `DefaultMapProvider` to configure an implicit default value.
 
-    Note that configuring _neither_ a default _nor_ an explicit `map` or `mapId` will trigger a runtime error.
+  Note that configuring _neither_ a default _nor_ an explicit `map` or `mapId` will trigger a runtime error.
 
 - 583f1d6: All UI components in this project now accept the `mapId` (a `string`) _or_ the `map` (a `MapModel`) directly.
 - 397d617: Reimplement computation of map anchor positioning using new css props.
@@ -785,20 +830,20 @@
 - 583f1d6: The new component `DefaultMapProvider` allows you to configure the _default map_ for its children.
   If `DefaultMapProvider` is used, you can omit the explicit `mapId` (or `map`) property on the individual UI components.
 
-    For many applications, `DefaultMapProvider` can be used to surround all (or most of) the application's UI.
+  For many applications, `DefaultMapProvider` can be used to surround all (or most of) the application's UI.
 
-    Example:
+  Example:
 
-    ```tsx
-    import { DefaultMapProvider } from "@open-pioneer/map";
+  ```tsx
+  import { DefaultMapProvider } from "@open-pioneer/map";
 
-    <DefaultMapProvider mapId={MAP_ID}>
-        {/* no need to repeat the map id in this subtree, unless you want to use a different one */}
-        <MapContainer />
-        <Toc />
-        <ComplexChild />
-    </DefaultMapProvider>;
-    ```
+  <DefaultMapProvider mapId={MAP_ID}>
+    {/* no need to repeat the map id in this subtree, unless you want to use a different one */}
+    <MapContainer />
+    <Toc />
+    <ComplexChild />
+  </DefaultMapProvider>;
+  ```
 
 - 397d617: Move attribution of OL map according to the map view's padding.
 
@@ -815,36 +860,36 @@
 
 - 0d51d2f: Change how map anchors are positioned in the DOM.
 
-    Previously, map anchor divs were children of the OpenLayers map viewport:
+  Previously, map anchor divs were children of the OpenLayers map viewport:
 
-    ```
-    .map-container
-    └── .ol-viewport
-        └── .ol-overlaycontainer-stopevent
-            └── .map-anchors
-                └── .map-anchor
-                    └── ... children ...
-    ```
+  ```
+  .map-container
+  └── .ol-viewport
+      └── .ol-overlaycontainer-stopevent
+          └── .map-anchors
+              └── .map-anchor
+                  └── ... children ...
+  ```
 
-    This interfered with browser event handling, especially if the map anchor's content was interactive.
-    The workarounds to stop events from map-anchors to bubble into the map caused surprising behavior (e.g. https://github.com/open-pioneer/trails-openlayers-base-packages/issues/312).
+  This interfered with browser event handling, especially if the map anchor's content was interactive.
+  The workarounds to stop events from map-anchors to bubble into the map caused surprising behavior (e.g. https://github.com/open-pioneer/trails-openlayers-base-packages/issues/312).
 
-    Now, the DOM looks like this:
+  Now, the DOM looks like this:
 
-    ```
-    .map-container
-    ├── .map-anchors
-    │   └── .map-anchor
-    │       └── ... children ...
-    └── .ol-viewport
-    ```
+  ```
+  .map-container
+  ├── .map-anchors
+  │   └── .map-anchor
+  │       └── ... children ...
+  └── .ol-viewport
+  ```
 
-    Which means that the map-anchors are no longer children of the map.
+  Which means that the map-anchors are no longer children of the map.
 
-    You may have to update your custom styles if you relied on the previous DOM hierarchy.
+  You may have to update your custom styles if you relied on the previous DOM hierarchy.
 
-    The `MapAnchor`'s prop `stopEvents` has been deleted as it is no longer needed.
-    Browser events happening inside a map anchor or its children will no longer affect the map.
+  The `MapAnchor`'s prop `stopEvents` has been deleted as it is no longer needed.
+  Browser events happening inside a map anchor or its children will no longer affect the map.
 
 ### Patch Changes