@oneuptime/common 11.6.0 → 11.6.2

package/Types/Monitor/SnmpMonitor/SnmpVendorTemplate.ts

@@ -41,6 +41,205 @@ const CISCO: SnmpVendorTemplate = {
       name: "Temperature (C)",
       description: "ciscoEnvMonTemperatureValue — first temperature sensor.",
     },
+    {
+      /*
+       * First row of ciscoEnvMonFanStatusTable. State is an enum, not a
+       * gauge — criteria should alert when the value is anything but 1.
+       */
+      oid: "1.3.6.1.4.1.9.9.13.1.4.1.3.1",
+      name: "Fan State",
+      description: "ciscoEnvMonFanState — first fan; 1 = normal.",
+    },
+    {
+      // First row of ciscoEnvMonSupplyStatusTable — same enum as fan state.
+      oid: "1.3.6.1.4.1.9.9.13.1.5.1.3.1",
+      name: "PSU State",
+      description: "ciscoEnvMonSupplyState — first power supply; 1 = normal.",
+    },
+  ],
+};
+
+const JUNIPER: SnmpVendorTemplate = {
+  id: "juniper-junos",
+  label: "Juniper Junos",
+  description:
+    "Routing Engine CPU, memory buffer, and temperature from the Juniper jnxOperatingTable (Junos routers, switches, and firewalls).",
+  oids: [
+    {
+      /*
+       * jnxOperatingTable rows are indexed by chassis position; 9.1.0.0 is
+       * the documented first Routing Engine (RE0) row on most Junos
+       * platforms. Adjust the index for multi-RE chassis.
+       */
+      oid: "1.3.6.1.4.1.2636.3.1.13.1.8.9.1.0.0",
+      name: "CPU %",
+      description: "jnxOperatingCPU — Routing Engine CPU utilization.",
+    },
+    {
+      oid: "1.3.6.1.4.1.2636.3.1.13.1.11.9.1.0.0",
+      name: "Memory Buffer %",
+      description: "jnxOperatingBuffer — Routing Engine memory utilization.",
+    },
+    {
+      oid: "1.3.6.1.4.1.2636.3.1.13.1.7.9.1.0.0",
+      name: "Temperature (C)",
+      description: "jnxOperatingTemp — Routing Engine temperature.",
+    },
+  ],
+};
+
+const ARISTA: SnmpVendorTemplate = {
+  id: "arista-eos",
+  label: "Arista EOS",
+  description:
+    "CPU load, load average, and memory via the standard Host Resources and UCD MIBs — Arista EOS exposes these rather than a vendor-specific CPU/memory MIB.",
+  oids: [
+    {
+      oid: "1.3.6.1.2.1.25.3.3.1.2.1",
+      name: "CPU Load %",
+      description: "hrProcessorLoad — first processor.",
+    },
+    {
+      oid: "1.3.6.1.4.1.2021.10.1.3.1",
+      name: "Load Average (1 min)",
+      description: "laLoad.1 — UCD-SNMP-MIB.",
+    },
+    {
+      oid: "1.3.6.1.4.1.2021.4.5.0",
+      name: "Total RAM (KB)",
+      description: "memTotalReal — UCD-SNMP-MIB.",
+    },
+    {
+      oid: "1.3.6.1.4.1.2021.4.6.0",
+      name: "Available RAM (KB)",
+      description: "memAvailReal — UCD-SNMP-MIB.",
+    },
+  ],
+};
+
+const HPE_PROCURVE: SnmpVendorTemplate = {
+  id: "hpe-procurve",
+  label: "HPE / Aruba ProCurve",
+  description:
+    "CPU and global memory from the HP switch STATISTICS and NETSWITCH MIBs on ProCurve / ArubaOS-Switch devices.",
+  oids: [
+    {
+      oid: "1.3.6.1.4.1.11.2.14.11.5.1.9.6.1.0",
+      name: "CPU %",
+      description: "hpSwitchCpuStat — CPU utilization.",
+    },
+    {
+      // hpGlobalMemTable rows are per memory slot; index 1 is the first slot.
+      oid: "1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.5.1",
+      name: "Memory Total (bytes)",
+      description: "hpGlobalMemTotalBytes — first memory slot.",
+    },
+    {
+      oid: "1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.6.1",
+      name: "Memory Free (bytes)",
+      description: "hpGlobalMemFreeBytes — first memory slot.",
+    },
+  ],
+};
+
+const FORTINET: SnmpVendorTemplate = {
+  id: "fortinet-fortigate",
+  label: "Fortinet FortiGate",
+  description:
+    "System CPU, memory, and disk utilization percentages from the FORTINET-FORTIGATE-MIB fgSystemInfo scalars.",
+  oids: [
+    {
+      oid: "1.3.6.1.4.1.12356.101.4.1.3.0",
+      name: "CPU %",
+      description: "fgSysCpuUsage — overall CPU utilization.",
+    },
+    {
+      oid: "1.3.6.1.4.1.12356.101.4.1.4.0",
+      name: "Memory %",
+      description: "fgSysMemUsage — memory utilization.",
+    },
+    {
+      oid: "1.3.6.1.4.1.12356.101.4.1.6.0",
+      name: "Disk %",
+      description: "fgSysDiskUsage — disk utilization.",
+    },
+  ],
+};
+
+const PALO_ALTO: SnmpVendorTemplate = {
+  id: "paloalto-panos",
+  label: "Palo Alto PAN-OS",
+  description:
+    "Management-plane CPU via the standard HOST-RESOURCES-MIB — Palo Alto's documented monitoring practice, PAN-OS has no vendor CPU OID — plus session load from PAN-COMMON-MIB.",
+  oids: [
+    {
+      /*
+       * PAN-OS exposes CPU only through hrProcessorLoad; index 1 is the
+       * management plane on the platforms Palo Alto documents.
+       */
+      oid: "1.3.6.1.2.1.25.3.3.1.2.1",
+      name: "Mgmt CPU %",
+      description: "hrProcessorLoad — management-plane CPU.",
+    },
+    {
+      oid: "1.3.6.1.4.1.25461.2.1.2.3.1.0",
+      name: "Session Utilization %",
+      description: "panSessionUtilization — session table utilization.",
+    },
+    {
+      oid: "1.3.6.1.4.1.25461.2.1.2.3.3.0",
+      name: "Active Sessions",
+      description: "panSessionActive — total active sessions.",
+    },
+  ],
+};
+
+const HUAWEI: SnmpVendorTemplate = {
+  id: "huawei-vrp",
+  label: "Huawei VRP",
+  description:
+    "Mainboard CPU, memory, and temperature from the HUAWEI-ENTITY-EXTENT-MIB hwEntityStateTable.",
+  oids: [
+    {
+      /*
+       * hwEntityStateTable is indexed by ENTITY-MIB entPhysicalIndex;
+       * 67108867 is the conventional mainboard index on most VRP devices —
+       * walk the table and adjust if the device numbers entities differently.
+       */
+      oid: "1.3.6.1.4.1.2011.5.25.31.1.1.1.1.5.67108867",
+      name: "CPU %",
+      description: "hwEntityCpuUsage — mainboard CPU utilization.",
+    },
+    {
+      oid: "1.3.6.1.4.1.2011.5.25.31.1.1.1.1.7.67108867",
+      name: "Memory %",
+      description: "hwEntityMemUsage — mainboard memory utilization.",
+    },
+    {
+      oid: "1.3.6.1.4.1.2011.5.25.31.1.1.1.1.11.67108867",
+      name: "Temperature (C)",
+      description: "hwEntityTemperature — mainboard temperature.",
+    },
+  ],
+};
+
+const DELL_FORCE10: SnmpVendorTemplate = {
+  id: "dell-force10",
+  label: "Dell Force10 / OS9",
+  description:
+    "Stack-unit CPU and memory utilization from the Dell Force10 S-series chassis MIB.",
+  oids: [
+    {
+      // chStackUnitUtilTable first stack unit (index 1).
+      oid: "1.3.6.1.4.1.6027.3.10.1.2.9.1.2.1",
+      name: "CPU 5-sec %",
+      description: "chStackUnitCpuUtil5Sec — first stack unit.",
+    },
+    {
+      oid: "1.3.6.1.4.1.6027.3.10.1.2.9.1.5.1",
+      name: "Memory %",
+      description: "chStackUnitMemUsageUtil — first stack unit.",
+    },
   ],
 };
 
@@ -71,9 +270,9 @@ const MIKROTIK: SnmpVendorTemplate = {
 
 const UBIQUITI: SnmpVendorTemplate = {
   id: "ubiquiti-edgeos",
-  label: "Ubiquiti EdgeOS / UniFi",
+  label: "Ubiquiti EdgeOS / EdgeSwitch / UniFi",
   description:
-    "CPU load and memory usage via the standard Host Resources MIB, which Ubiquiti EdgeOS and UniFi expose.",
+    "CPU load and memory usage via the standard Host Resources and UCD MIBs — Ubiquiti publishes no vendor health MIB, but EdgeOS, EdgeSwitch, and UniFi devices answer these.",
   oids: [
     {
       oid: "1.3.6.1.2.1.25.3.3.1.2.1",
@@ -122,10 +321,18 @@ const HOST_RESOURCES: SnmpVendorTemplate = {
   ],
 };
 
+// Generic first (the safe default), then vendors alphabetically.
 export const SnmpVendorTemplates: Array<SnmpVendorTemplate> = [
   HOST_RESOURCES,
+  ARISTA,
   CISCO,
+  DELL_FORCE10,
+  FORTINET,
+  HPE_PROCURVE,
+  HUAWEI,
+  JUNIPER,
   MIKROTIK,
+  PALO_ALTO,
   UBIQUITI,
 ];
 
@@ -150,6 +357,8 @@ const ENTERPRISE_VENDOR_NAMES: Record<number, string> = {
   2636: "Juniper",
   3224: "NetScreen",
   3375: "F5",
+  // Ubiquiti EdgeSwitch firmware (Broadcom FASTPATH based) reports this arc.
+  4413: "Broadcom",
   4526: "Netgear",
   6027: "Force10",
   6486: "Alcatel-Lucent",
@@ -174,10 +383,29 @@ const ENTERPRISE_VENDOR_NAMES: Record<number, string> = {
   47196: "OPNsense",
 };
 
-// sysObjectID template routing: enterprise number → vendor template id.
+/*
+ * sysObjectID template routing: enterprise number → vendor template id.
+ * Name-only vendors (e.g. Dell 674, F5 3375) deliberately have no entry —
+ * their platforms need MIBs we do not ship a template for yet, and callers
+ * fall back to the generic Host Resources template.
+ */
 const ENTERPRISE_TEMPLATE_IDS: Record<number, string> = {
   9: "cisco-ios",
+  11: "hpe-procurve",
+  2011: "huawei-vrp",
+  2636: "juniper-junos",
+  /*
+   * Ubiquiti EdgeSwitch firmware reports Broadcom's FASTPATH arc (4413)
+   * rather than Ubiquiti's own 41112. The template only contains standard
+   * Host Resources / UCD OIDs, so routing the whole arc there is safe for
+   * other FASTPATH-based switches too.
+   */
+  4413: "ubiquiti-edgeos",
+  6027: "dell-force10",
+  12356: "fortinet-fortigate",
   14988: "mikrotik-routeros",
+  25461: "paloalto-panos",
+  30065: "arista-eos",
   41112: "ubiquiti-edgeos",
 };
 

package/Types/NetworkSite/DefaultNetworkSiteType.ts

@@ -0,0 +1,20 @@
+/*
+ * Site types are no longer a fixed enum: they are a per-project configurable
+ * lookup table (the NetworkSiteType database model), so a project can rename
+ * "Unit" to "Store" or add its own levels. This enum survives ONLY as the list
+ * of default type names seeded into every project (and re-used by the backfill
+ * data migration for existing projects). Never compare a site's type against
+ * these values to decide behaviour — use the NetworkSiteType row's
+ * `isUnitLevel` flag instead, since the names are user-editable.
+ */
+export enum DefaultNetworkSiteType {
+  AccountType = "Account Type",
+  Region = "Region",
+  Franchisee = "Franchisee",
+  Market = "Market",
+  Unit = "Unit",
+  DataCenter = "Data Center",
+  Other = "Other",
+}
+
+export default DefaultNetworkSiteType;

package/Types/NotificationSetting/NotificationSettingEventType.ts

@@ -58,6 +58,10 @@ enum NotificationSettingEventType {
   SEND_AI_AGENT_STATUS_CHANGED_OWNER_NOTIFICATION = "Send AI agent status changed notification when I am the owner of the AI agent",
   SEND_AI_AGENT_OWNER_ADDED_NOTIFICATION = "Send notification when I am added as a owner to the AI agent",
 
+  // SLO
+  SEND_SLO_OWNER_STATUS_CHANGE_NOTIFICATION = "Send SLO status change notification when I am the owner of the SLO",
+  SEND_SLO_OWNER_ADDED_NOTIFICATION = "Send notification when I am added as a owner to the SLO",
+
   // On Call Notifications
   SEND_WHEN_USER_IS_ON_CALL_ROSTER = "When user is on-call roster",
   SEND_WHEN_USER_IS_NEXT_ON_CALL_ROSTER = "When user is next on-call roster",