@onekeyfe/hwk-adapter-core 1.1.26-alpha.8 → 1.1.26

package/dist/index.d.mts

@@ -27,6 +27,8 @@ declare enum HardwareErrorCode {
     InvalidParams = 10002,
     OperationTimeout = 10003,
     MethodNotSupported = 10004,
+    /** User dismissed in-app cancel UI. Distinct from UserRejected (on-device). */
+    UserAborted = 10005,
     DeviceNotFound = 10100,
     DeviceDisconnected = 10101,
     DeviceBusy = 10102,
@@ -34,6 +36,10 @@ declare enum HardwareErrorCode {
     DeviceNotInitialized = 10104,
     DeviceInBootloader = 10105,
     DeviceMismatch = 10106,
+    /** Chain app wedged (e.g. Ledger BTC 0x6901). User must exit app on device. */
+    DeviceAppStuck = 10107,
+    /** Vendor (Ledger / Trezor) doesn't support the chain at all. */
+    ChainNotSupported = 10108,
     FirmwareTooOld = 10200,
     FirmwareUpdateRequired = 10201,
     TransportError = 10300,
@@ -45,10 +51,19 @@ declare enum HardwareErrorCode {
      * permission" toast and let the user retry manually.
      */
     DevicePermissionDenied = 10303,
+    /**
+     * BLE SMP pairing did not complete within the GATT bonding window.
+     * GATT connected but the device didn't acknowledge SMP — typically
+     * because the user didn't confirm the passkey on the device, or the
+     * device went out of range mid-pairing. Distinct from OperationTimeout
+     * (generic) and from DeviceLocked (Secure Element actually locked).
+     */
+    BlePairingTimeout = 10304,
     PinInvalid = 10400,
     PinCancelled = 10401,
     PassphraseRejected = 10402,
-    AppNotOpen = 10500,
+    /** Chain app NOT INSTALLED on device. User must install via Ledger Live. */
+    AppNotInstalled = 10500,
     WrongApp = 10501,
     /** 0x911c Command code not supported — app predates current SDK. */
     AppTooOld = 10502,
@@ -74,6 +89,18 @@ declare enum HardwareErrorCode {
     /** 0xb007 Aborted due to unexpected state (malformed PSBT / missing UTXO). */
     BtcUnexpectedState = 11301
 }
+/**
+ * Device-level failures the SDK cannot self-recover from — affect the entire
+ * batch (vs per-chain failures like AppNotInstalled / WrongApp which soft-
+ * skip in onboarding). Combined with `accounts.length === 0`, signals
+ * genuine orphan. Also reused as the batch-abort whitelist for HWK.
+ * Single source of truth.
+ *
+ * UserRejected (device-side reject) is included: pressing reject is an
+ * explicit "I don't consent" — continuing the batch to ask again on the
+ * next chain is harassment, not helpful.
+ */
+declare const ORPHAN_ELIGIBLE_ERROR_CODES: number[];
 
 interface Success<T> {
     success: true;
@@ -84,11 +111,12 @@ interface Failure {
     payload: {
         error: string;
         code: HardwareErrorCode;
+        params?: Record<string, unknown>;
     };
 }
 type Response<T> = Success<T> | Failure;
 declare function success<T>(payload: T): Success<T>;
-declare function failure(code: HardwareErrorCode, error: string): Failure;
+declare function failure(code: HardwareErrorCode, error: string, params?: Record<string, unknown>): Failure;
 
 type VendorType = 'trezor' | 'ledger';
 type ConnectionType = 'usb' | 'ble';
@@ -113,13 +141,22 @@ interface DeviceCapabilities {
 }
 interface DeviceInfo {
     vendor: VendorType;
+    /** Machine model id (e.g. "nanoX"). */
     model: string;
+    /** Human-readable model name (e.g. "Ledger Nano X"). */
+    modelName?: string;
     firmwareVersion: string;
     deviceId: string;
     connectId: string;
     label?: string;
     connectionType: ConnectionType;
     battery?: number;
+    /** BLE signal strength (BLE only). */
+    rssi?: number | null;
+    /** BLE connectable flag (BLE only). */
+    isConnectable?: boolean | null;
+    /** USB serial number (USB only). */
+    serialNumber?: string;
     /** Device capabilities — varies by vendor, model, and connection type */
     capabilities?: DeviceCapabilities;
 }
@@ -211,13 +248,8 @@ interface EvmSignature {
     signature: string;
     address?: string;
 }
-type ProgressCallback = (progress: {
-    index: number;
-    total: number;
-}) => void;
 interface IEvmMethods {
     evmGetAddress(connectId: string, deviceId: string, params: EvmGetAddressParams): Promise<Response<EvmAddress>>;
-    evmGetAddresses(connectId: string, deviceId: string, params: EvmGetAddressParams[], onProgress?: ProgressCallback): Promise<Response<EvmAddress[]>>;
     evmSignTransaction(connectId: string, deviceId: string, params: EvmSignTxParams): Promise<Response<EvmSignedTx>>;
     evmSignMessage(connectId: string, deviceId: string, params: EvmSignMsgParams): Promise<Response<EvmSignature>>;
     evmSignTypedData(connectId: string, deviceId: string, params: EvmSignTypedDataParams): Promise<Response<EvmSignature>>;
@@ -316,7 +348,6 @@ interface BtcSignature {
 }
 interface IBtcMethods {
     btcGetAddress(connectId: string, deviceId: string, params: BtcGetAddressParams): Promise<Response<BtcAddress>>;
-    btcGetAddresses(connectId: string, deviceId: string, params: BtcGetAddressParams[], onProgress?: ProgressCallback): Promise<Response<BtcAddress[]>>;
     btcGetPublicKey(connectId: string, deviceId: string, params: BtcGetPublicKeyParams): Promise<Response<BtcPublicKey>>;
     btcSignTransaction(connectId: string, deviceId: string, params: BtcSignTxParams): Promise<Response<BtcSignedTx>>;
     btcSignPsbt(connectId: string, deviceId: string, params: BtcSignPsbtParams): Promise<Response<BtcSignedPsbt>>;
@@ -363,7 +394,6 @@ interface SolSignature {
 }
 interface ISolMethods {
     solGetAddress(connectId: string, deviceId: string, params: SolGetAddressParams): Promise<Response<SolAddress>>;
-    solGetAddresses(connectId: string, deviceId: string, params: SolGetAddressParams[], onProgress?: ProgressCallback): Promise<Response<SolAddress[]>>;
     solSignTransaction(connectId: string, deviceId: string, params: SolSignTxParams): Promise<Response<SolSignedTx>>;
     solSignMessage(connectId: string, deviceId: string, params: SolSignMsgParams): Promise<Response<SolSignature>>;
 }
@@ -397,7 +427,6 @@ interface TronSignature {
 }
 interface ITronMethods {
     tronGetAddress(connectId: string, deviceId: string, params: TronGetAddressParams): Promise<Response<TronAddress>>;
-    tronGetAddresses(connectId: string, deviceId: string, params: TronGetAddressParams[], onProgress?: ProgressCallback): Promise<Response<TronAddress[]>>;
     tronSignTransaction(connectId: string, deviceId: string, params: TronSignTxParams): Promise<Response<TronSignedTx>>;
     tronSignMessage(connectId: string, deviceId: string, params: TronSignMsgParams): Promise<Response<TronSignature>>;
 }
@@ -438,90 +467,6 @@ declare const DEVICE: {
     readonly CHANGED: "device-changed";
 };
 
-/** 10 min — every UI request is human-in-the-loop; bias toward "wait long". */
-declare const UI_REQUEST_DEFAULT_TIMEOUT_MS = 600000;
-declare const UI_REQUEST_PREEMPTED_TAG = "UiRequestPreempted";
-declare const UI_REQUEST_CANCELLED_TAG = "UiRequestCancelled";
-declare const UI_REQUEST_TIMEOUT_TAG = "UiRequestTimeout";
-/**
- * Per-type single-slot registry for adapter-level UI requests. A new `wait`
- * of the same type preempts (rejects) the prior one. Unknown response types
- * are dropped silently so the public `uiResponse` entry never throws.
- */
-declare class UiRequestRegistry {
-    private pending;
-    wait<T = unknown>(requestType: string, options?: {
-        timeoutMs?: number;
-    }): Promise<T>;
-    resolve(responseType: string, payload: unknown): void;
-    cancel(requestType?: string): void;
-    reset(): void;
-    hasPending(requestType: string): boolean;
-}
-
-/**
- * Per-device serial job queue with preemption support and stuck recovery.
- * Ensures that only one operation runs at a time per device, with intelligent
- * handling of conflicting operations.
- *
- * The 'confirm' level uses the standard UI request/response flow:
- * emits REQUEST_PREEMPTION → waits for RECEIVE_PREEMPTION via UiRequestRegistry.
- */
-
-type Interruptibility = 'none' | 'safe' | 'confirm';
-type PreemptionDecision = 'cancel-current' | 'wait' | 'reject-new';
-interface JobOptions {
-    interruptibility?: Interruptibility;
-    label?: string;
-}
-interface ActiveJobInfo {
-    label?: string;
-    interruptibility: Interruptibility;
-    startedAt: number;
-}
-interface PreemptionEvent {
-    deviceId: string;
-    currentJob: ActiveJobInfo;
-    newJob: {
-        label?: string;
-        interruptibility: Interruptibility;
-    };
-}
-interface DeviceJobQueueDeps {
-    /** Emit a UI request event to the frontend. */
-    emit: (event: string, data: unknown) => void;
-    /** Registry for waiting on UI responses. */
-    uiRegistry: UiRequestRegistry;
-}
-declare class DeviceJobQueue {
-    private readonly _queues;
-    private readonly _active;
-    private readonly _deps;
-    /** Incremented on clear() so stale queued jobs can detect invalidation. */
-    private _generation;
-    constructor(deps?: DeviceJobQueueDeps);
-    /**
-     * Enqueue a job for a specific device.
-     * If a job is already running for this device, behavior depends on interruptibility:
-     * - 'none': new job queues silently (no preemption possible)
-     * - 'safe': current job is auto-cancelled, new job runs immediately after
-     * - 'confirm': emits REQUEST_PREEMPTION and waits for UI response
-     */
-    enqueue<T>(deviceId: string, job: (signal: AbortSignal) => Promise<T>, options?: JobOptions): Promise<T>;
-    /** Manually cancel the active job on a device. Returns false if job is non-interruptible. */
-    cancelActive(deviceId: string): boolean;
-    /** Force cancel regardless of interruptibility. Use for device stuck recovery. */
-    forceCancelActive(deviceId: string): boolean;
-    /** Get info about the currently active job for a device, or null if idle. */
-    getActiveJob(deviceId: string): ActiveJobInfo | null;
-    clear(): void;
-    /**
-     * Request preemption decision via UI request/response flow.
-     * Falls back to 'wait' if deps are not provided.
-     */
-    private _requestPreemptionDecision;
-}
-
 declare const UI_EVENT = "UI_EVENT";
 declare const UI_REQUEST: {
     readonly REQUEST_PIN: "ui-request-pin";
@@ -533,7 +478,7 @@ declare const UI_REQUEST: {
     readonly REQUEST_DEVICE_PERMISSION: "ui-request-device-permission";
     readonly REQUEST_SELECT_DEVICE: "ui-request-select-device";
     readonly REQUEST_DEVICE_CONNECT: "ui-request-device-connect";
-    readonly REQUEST_PREEMPTION: "ui-request-preemption";
+    readonly REQUEST_BTC_HIGH_INDEX_CONFIRM: "ui-request-btc-high-index-confirm";
     readonly CLOSE_UI_WINDOW: "ui-close";
     readonly DEVICE_PROGRESS: "ui-device_progress";
     readonly FIRMWARE_PROGRESS: "ui-firmware-progress";
@@ -547,9 +492,15 @@ declare const UI_RESPONSE: {
     readonly RECEIVE_SELECT_DEVICE: "receive-select-device";
     readonly RECEIVE_DEVICE_CONNECT: "receive-device-connect";
     readonly RECEIVE_DEVICE_PERMISSION: "receive-device-permission";
-    readonly RECEIVE_PREEMPTION: "receive-preemption";
+    readonly RECEIVE_BTC_HIGH_INDEX_CONFIRM: "receive-btc-high-index-confirm";
     readonly CANCEL: "cancel";
 };
+type DevicePermissionDeniedReason = 'bluetoothTurnedOff' | 'permissionDenied' | (string & Record<never, never>);
+type DevicePermissionResponse = {
+    granted: boolean;
+    reason?: DevicePermissionDeniedReason;
+    message?: string;
+};
 type UiResponseEvent = {
     type: typeof UI_RESPONSE.RECEIVE_PIN;
     payload: string;
@@ -578,13 +529,11 @@ type UiResponseEvent = {
     };
 } | {
     type: typeof UI_RESPONSE.RECEIVE_DEVICE_PERMISSION;
-    payload: {
-        granted: boolean;
-    };
+    payload: DevicePermissionResponse;
 } | {
-    type: typeof UI_RESPONSE.RECEIVE_PREEMPTION;
+    type: typeof UI_RESPONSE.RECEIVE_BTC_HIGH_INDEX_CONFIRM;
     payload: {
-        decision: PreemptionDecision;
+        confirmed: boolean;
     };
 } | {
     type: typeof UI_RESPONSE.CANCEL;
@@ -599,6 +548,155 @@ declare const SDK: {
     readonly DEVICE_INTERACTION: "device-interaction";
 };
 
+/**
+ * Minimal device info returned during discovery (searchDevices).
+ * At scan time, full DeviceInfo fields like firmwareVersion are not yet available.
+ */
+interface ConnectorDevice {
+    connectId: string;
+    deviceId: string;
+    name: string;
+    /** Machine model id (e.g. "nanoX"). */
+    model?: string;
+    /** Human-readable model name (e.g. "Ledger Nano X"). */
+    modelName?: string;
+    /** BLE signal strength (BLE only). */
+    rssi?: number | null;
+    /** BLE connectable flag (BLE only). */
+    isConnectable?: boolean | null;
+    /** USB serial number (USB only). */
+    serialNumber?: string;
+    /** Device capabilities — available from scan time */
+    capabilities?: DeviceCapabilities;
+}
+interface ConnectorSession {
+    sessionId: string;
+    deviceInfo: DeviceInfo;
+}
+type ConnectorEventType = 'device-connect' | 'device-disconnect' | 'ui-request' | 'ui-event';
+/**
+ * Interaction event types emitted via 'ui-event'.
+ * These map to user-facing prompts (confirm on device, open app, etc.).
+ */
+declare enum EConnectorInteraction {
+    /** Adapter is actively searching for the device (no session yet) */
+    Searching = "searching",
+    /** Device requires user to open a specific app */
+    ConfirmOpenApp = "confirm-open-app",
+    /** Device requires user to unlock */
+    UnlockDevice = "unlock-device",
+    /** Device needs user to confirm on device (sign, verify, etc.) */
+    ConfirmOnDevice = "confirm-on-device",
+    /** Previous interaction completed — clear UI prompt */
+    InteractionComplete = "interaction-complete"
+}
+type ConnectorUiEvent = {
+    type: EConnectorInteraction.Searching;
+    payload: {
+        sessionId: string;
+    };
+} | {
+    type: EConnectorInteraction.ConfirmOpenApp;
+    payload: {
+        sessionId: string;
+    };
+} | {
+    type: EConnectorInteraction.UnlockDevice;
+    payload: {
+        sessionId: string;
+    };
+} | {
+    type: EConnectorInteraction.ConfirmOnDevice;
+    payload: {
+        sessionId: string;
+    };
+} | {
+    type: EConnectorInteraction.InteractionComplete;
+    payload: {
+        sessionId: string;
+    };
+};
+interface ConnectorEventMap {
+    'device-connect': {
+        device: ConnectorDevice;
+    };
+    'device-disconnect': {
+        connectId: string;
+    };
+    'ui-request': {
+        type: string;
+        payload?: unknown;
+    };
+    'ui-event': ConnectorUiEvent;
+}
+interface IConnector {
+    /** Physical connection type this connector uses. Fixed at construction. */
+    readonly connectionType: ConnectionType;
+    searchDevices(): Promise<ConnectorDevice[]>;
+    connect(deviceId?: string): Promise<ConnectorSession>;
+    disconnect(sessionId: string): Promise<void>;
+    call(sessionId: string, method: string, params: unknown): Promise<unknown>;
+    cancel(sessionId: string): Promise<void>;
+    /** Send a UI response (e.g. PIN, passphrase) to the device. */
+    uiResponse(response: UiResponseEvent): void;
+    on<K extends ConnectorEventType>(event: K, handler: (data: ConnectorEventMap[K]) => void): void;
+    off<K extends ConnectorEventType>(event: K, handler: (data: ConnectorEventMap[K]) => void): void;
+    reset(): void;
+}
+interface IHardwareBridge {
+    searchDevices(params: {
+        vendor: VendorType;
+    }): Promise<ConnectorDevice[]>;
+    connect(params: {
+        vendor: VendorType;
+        deviceId?: string;
+    }): Promise<ConnectorSession>;
+    disconnect(params: {
+        vendor: VendorType;
+        sessionId: string;
+    }): Promise<void>;
+    call(params: {
+        vendor: VendorType;
+        sessionId: string;
+        method: string;
+        callParams: unknown;
+    }): Promise<unknown>;
+    cancel(params: {
+        vendor: VendorType;
+        sessionId: string;
+    }): Promise<void>;
+    uiResponse(params: {
+        vendor: VendorType;
+        response: UiResponseEvent;
+    }): void;
+    reset(params: {
+        vendor: VendorType;
+    }): void;
+    /** Register an event handler for connector events forwarded across the bridge. */
+    onEvent(params: {
+        vendor: VendorType;
+    }, handler: (event: {
+        type: ConnectorEventType;
+        data: unknown;
+    }) => void): void;
+    /** Unregister a previously registered event handler. */
+    offEvent(params: {
+        vendor: VendorType;
+    }, handler: (event: {
+        type: ConnectorEventType;
+        data: unknown;
+    }) => void): void;
+}
+/**
+ * Adapt an IHardwareBridge (multi-vendor backend) into a single-vendor IConnector.
+ * Every IConnector method becomes a transparent forward to bridge.<method>({ vendor, ... }).
+ * Events are forwarded via bridge.onEvent / offEvent.
+ *
+ * Use this anywhere the actual hardware lives behind a process / context boundary
+ * (Electron main, extension background, native module, worker, iframe).
+ */
+declare function createBridgedConnector(vendor: VendorType, connectionType: ConnectionType, bridge: IHardwareBridge): IConnector;
+
 type ChainCapability = 'evm' | 'btc' | 'sol' | 'tron';
 interface PassphraseResponse {
     passphrase: string;
@@ -664,18 +762,23 @@ type UiRequestEvent = {
 } | {
     type: typeof UI_REQUEST.REQUEST_DEVICE_CONNECT;
     payload: {
+        /** Vendor that emitted the request, e.g. 'ledger', 'trezor'. */
+        vendor: string;
+        /**
+         * Why the SDK is asking for a reconnect. Lets the app render
+         * vendor-aware copy without inspecting message strings.
+         * - 'device-not-found': search returned 0 / device not reachable.
+         * Future values can be added (e.g. 'pairing-failed') as new fallback
+         * causes are surfaced.
+         */
+        reason: string;
+        /**
+         * Best-effort English fallback. Apps should prefer rendering via
+         * `vendor` + `reason` for i18n; fall back to this if the combination
+         * isn't recognized.
+         */
         message: string;
     };
-} | {
-    type: typeof UI_REQUEST.REQUEST_PREEMPTION;
-    payload: {
-        deviceId: string;
-        currentJob: ActiveJobInfo;
-        newJob: {
-            label?: string;
-            interruptibility: Interruptibility;
-        };
-    };
 } | {
     type: typeof UI_REQUEST.CLOSE_UI_WINDOW;
     payload: Record<string, never>;
@@ -702,7 +805,7 @@ type SdkEvent = {
         connectId: string;
     };
 };
-type HardwareEvent = DeviceEvent | UiRequestEvent | SdkEvent;
+type HardwareEvent = DeviceEvent | UiRequestEvent | SdkEvent | ConnectorUiEvent;
 type DeviceEventListener = (event: HardwareEvent) => void;
 /**
  * Type-safe event map for IHardwareWallet.on / .off.
@@ -711,6 +814,7 @@ type DeviceEventListener = (event: HardwareEvent) => void;
  * and the value is the narrowed event object the listener will receive.
  */
 interface HardwareEventMap {
+    'ui-event': ConnectorUiEvent;
     [DEVICE.CONNECT]: {
         type: typeof DEVICE.CONNECT;
         payload: DeviceInfo;
@@ -780,18 +884,17 @@ interface HardwareEventMap {
     [UI_REQUEST.REQUEST_DEVICE_CONNECT]: {
         type: typeof UI_REQUEST.REQUEST_DEVICE_CONNECT;
         payload: {
+            vendor: string;
+            reason: string;
             message: string;
         };
     };
-    [UI_REQUEST.REQUEST_PREEMPTION]: {
-        type: typeof UI_REQUEST.REQUEST_PREEMPTION;
+    [UI_REQUEST.REQUEST_BTC_HIGH_INDEX_CONFIRM]: {
+        type: typeof UI_REQUEST.REQUEST_BTC_HIGH_INDEX_CONFIRM;
         payload: {
-            deviceId: string;
-            currentJob: ActiveJobInfo;
-            newJob: {
-                label?: string;
-                interruptibility: Interruptibility;
-            };
+            vendor: string;
+            path: string;
+            accountIndex: number;
         };
     };
     [UI_REQUEST.CLOSE_UI_WINDOW]: {
@@ -831,12 +934,13 @@ interface IHardwareWallet<TConfig = unknown> extends IEvmMethods, IBtcMethods, I
     dispose(): Promise<void>;
     getAvailableTransports(): TransportType[];
     switchTransport(type: TransportType): Promise<void>;
-    searchDevices(): Promise<DeviceInfo[]>;
+    searchDevices(options?: SearchDevicesOptions): Promise<DeviceInfo[]>;
     connectDevice(connectId: string): Promise<Response<string>>;
     disconnectDevice(connectId: string): Promise<void>;
     getDeviceInfo(connectId: string, deviceId: string): Promise<Response<DeviceInfo>>;
     getSupportedChains(): ChainCapability[];
-    cancel(connectId: string): void;
+    /** Abort the in-flight call. Omit connectId to cancel whatever is active. */
+    cancel(connectId?: string): void;
     /** Respond to any pending `ui-request-*`. */
     uiResponse(response: UiResponseEvent): void;
     /**
@@ -854,6 +958,16 @@ interface IHardwareWallet<TConfig = unknown> extends IEvmMethods, IBtcMethods, I
     off<K extends keyof HardwareEventMap>(event: K, listener: (event: HardwareEventMap[K]) => void): void;
     off(event: string, listener: DeviceEventListener): void;
 }
+interface SearchDevicesOptions {
+    /**
+     * Clear cached adapter sessions before scanning.
+     *
+     * Use this for an explicit "search/add another device" flow on transports
+     * whose connectId is not stable, such as Ledger WebHID. Normal refresh scans
+     * should leave this false so an active session can still be reused.
+     */
+    resetSession?: boolean;
+}
 
 /**
  * Low-level device descriptor from Transport layer.
@@ -866,12 +980,28 @@ interface DeviceDescriptor {
     product?: number;
     /** USB vendor ID */
     vendor?: number;
-    /** Device type/model identifier */
+    /** Device type/model identifier (e.g. "nanoX"). */
     type?: string;
-    /** BLE device name (e.g., "Nano X 123A") — contains stable 4-digit HEX suffix */
+    /** Human-readable model name (e.g. "Ledger Nano X"). */
+    modelName?: string;
+    /** Human-readable display name from the transport layer. */
     name?: string;
+    /** Raw Ledger BLE advertisement name from RN BLE `Device.name`, when available. */
+    bleName?: string;
+    /** User-visible Ledger BLE local name from the raw RN BLE `Device.localName` field. */
+    localName?: string;
     /** Transport identifier (e.g., 'WEB-HID', 'BLE') */
     transport?: string;
+    /** BLE RSSI when provided by the transport scanner. */
+    rssi?: number | null;
+    /** BLE advertised service UUIDs, when provided by the scanner. */
+    serviceUUIDs?: string[] | null;
+    /** BLE connectable flag, when provided by the scanner. */
+    isConnectable?: boolean | null;
+    /** USB product name, when provided by the transport. */
+    productName?: string;
+    /** USB serial number, when provided by the transport. */
+    serialNumber?: string;
 }
 interface DeviceConnectEvent {
     type: 'device-connected';
@@ -884,137 +1014,51 @@ interface DeviceDisconnectEvent {
 type DeviceChangeEvent = DeviceConnectEvent | DeviceDisconnectEvent;
 
 /**
- * Minimal device info returned during discovery (searchDevices).
- * At scan time, full DeviceInfo fields like firmwareVersion are not yet available.
+ * Pure FIFO job queue. Every enqueue chains onto the tail; jobs run one at
+ * a time across all devices. The queue is intentionally passive — it does
+ * NOT decide whether to interrupt or ask the user. Those are application-
+ * layer concerns owned by the caller (e.g. a UI button handler that wants
+ * to ask "device is busy, interrupt current?" before submitting). The
+ * queue exposes inspection (`getActiveJob`) and explicit cancellation
+ * (`cancelActive` / `cancelAll`) so callers can implement those policies
+ * synchronously, without racing against in-flight enqueues.
  */
-interface ConnectorDevice {
-    connectId: string;
-    deviceId: string;
-    name: string;
-    model?: string;
-    /** Device capabilities — available from scan time */
-    capabilities?: DeviceCapabilities;
-}
-interface ConnectorSession {
-    sessionId: string;
-    deviceInfo: DeviceInfo;
-}
-type ConnectorEventType = 'device-connect' | 'device-disconnect' | 'ui-request' | 'ui-event';
-/**
- * Interaction event types emitted via 'ui-event'.
- * These map to user-facing prompts (confirm on device, open app, etc.).
- */
-declare enum EConnectorInteraction {
-    /** Device requires user to open a specific app */
-    ConfirmOpenApp = "confirm-open-app",
-    /** Device requires user to unlock */
-    UnlockDevice = "unlock-device",
-    /** Device needs user to confirm on device (sign, verify, etc.) */
-    ConfirmOnDevice = "confirm-on-device",
-    /** Previous interaction completed — clear UI prompt */
-    InteractionComplete = "interaction-complete"
-}
-type ConnectorUiEvent = {
-    type: EConnectorInteraction.ConfirmOpenApp;
-    payload: {
-        sessionId: string;
-    };
-} | {
-    type: EConnectorInteraction.UnlockDevice;
-    payload: {
-        sessionId: string;
-    };
-} | {
-    type: EConnectorInteraction.ConfirmOnDevice;
-    payload: {
-        sessionId: string;
-    };
-} | {
-    type: EConnectorInteraction.InteractionComplete;
-    payload: {
-        sessionId: string;
-    };
-};
-interface ConnectorEventMap {
-    'device-connect': {
-        device: ConnectorDevice;
-    };
-    'device-disconnect': {
-        connectId: string;
-    };
-    'ui-request': {
-        type: string;
-        payload?: unknown;
-    };
-    'ui-event': ConnectorUiEvent;
+interface JobOptions {
+    label?: string;
+    rejectIfBusy?: boolean;
+    busyError?: Error;
 }
-interface IConnector {
-    /** Physical connection type this connector uses. Fixed at construction. */
-    readonly connectionType: ConnectionType;
-    searchDevices(): Promise<ConnectorDevice[]>;
-    connect(deviceId?: string): Promise<ConnectorSession>;
-    disconnect(sessionId: string): Promise<void>;
-    call(sessionId: string, method: string, params: unknown): Promise<unknown>;
-    cancel(sessionId: string): Promise<void>;
-    /** Send a UI response (e.g. PIN, passphrase) to the device. */
-    uiResponse(response: UiResponseEvent): void;
-    on<K extends ConnectorEventType>(event: K, handler: (data: ConnectorEventMap[K]) => void): void;
-    off<K extends ConnectorEventType>(event: K, handler: (data: ConnectorEventMap[K]) => void): void;
-    reset(): void;
+interface ActiveJobInfo {
+    deviceId: string;
+    label?: string;
+    startedAt: number;
 }
-interface IHardwareBridge {
-    searchDevices(params: {
-        vendor: VendorType;
-    }): Promise<ConnectorDevice[]>;
-    connect(params: {
-        vendor: VendorType;
-        deviceId?: string;
-    }): Promise<ConnectorSession>;
-    disconnect(params: {
-        vendor: VendorType;
-        sessionId: string;
-    }): Promise<void>;
-    call(params: {
-        vendor: VendorType;
-        sessionId: string;
-        method: string;
-        callParams: unknown;
-    }): Promise<unknown>;
-    cancel(params: {
-        vendor: VendorType;
-        sessionId: string;
-    }): Promise<void>;
-    uiResponse(params: {
-        vendor: VendorType;
-        response: UiResponseEvent;
-    }): void;
-    reset(params: {
-        vendor: VendorType;
-    }): void;
-    /** Register an event handler for connector events forwarded across the bridge. */
-    onEvent(params: {
-        vendor: VendorType;
-    }, handler: (event: {
-        type: ConnectorEventType;
-        data: unknown;
-    }) => void): void;
-    /** Unregister a previously registered event handler. */
-    offEvent(params: {
-        vendor: VendorType;
-    }, handler: (event: {
-        type: ConnectorEventType;
-        data: unknown;
-    }) => void): void;
+declare class DeviceJobQueue {
+    private _tail;
+    private _active;
+    private readonly _jobs;
+    /** Incremented on clear() so queued-but-not-yet-running jobs detect invalidation. */
+    private _generation;
+    private readonly _generationCancelReasons;
+    /**
+     * Enqueue a job. Runs after every previously-enqueued job has settled.
+     * `deviceId` is a label only — used by inspection / cancellation routing.
+     */
+    enqueue<T>(deviceId: string, job: (signal: AbortSignal) => Promise<T>, options?: JobOptions): Promise<T>;
+    /** Cancel the active job. If `deviceId` is given, only cancels when it matches. */
+    cancelActive(deviceId?: string): boolean;
+    /** Force cancel the active job. `reason` becomes signal.reason. */
+    forceCancelActive(deviceId?: string, reason?: Error): boolean;
+    /** Cancel the active job (alias for callers that previously needed multi-device cancel). */
+    cancelAllActive(reason?: Error): void;
+    /** Cancel the active job and invalidate queued jobs that have not started. */
+    cancelActiveAndPending(deviceId?: string, reason?: Error): boolean;
+    /** Get info about the currently active job, or null if idle. */
+    getActiveJob(deviceId?: string): ActiveJobInfo | null;
+    /** True if any job is currently running. */
+    isBusy(): boolean;
+    clear(reason?: Error): void;
 }
-/**
- * Adapt an IHardwareBridge (multi-vendor backend) into a single-vendor IConnector.
- * Every IConnector method becomes a transparent forward to bridge.<method>({ vendor, ... }).
- * Events are forwarded via bridge.onEvent / offEvent.
- *
- * Use this anywhere the actual hardware lives behind a process / context boundary
- * (Electron main, extension background, native module, worker, iframe).
- */
-declare function createBridgedConnector(vendor: VendorType, connectionType: ConnectionType, bridge: IHardwareBridge): IConnector;
 
 /**
  * Minimal typed event emitter using Map<string, Set<listener>>.
@@ -1040,6 +1084,32 @@ declare class TypedEventEmitter<TMap extends Record<string, any> = Record<string
     removeAllListeners(): void;
 }
 
+/** 10 min — every UI request is human-in-the-loop; bias toward "wait long". */
+declare const UI_REQUEST_DEFAULT_TIMEOUT_MS = 600000;
+declare const UI_REQUEST_PREEMPTED_TAG = "UiRequestPreempted";
+declare const UI_REQUEST_CANCELLED_TAG = "UiRequestCancelled";
+declare const UI_REQUEST_TIMEOUT_TAG = "UiRequestTimeout";
+/**
+ * Per-type single-slot registry for adapter-level UI requests. A new `wait`
+ * of the same type supersedes (rejects) the prior pending entry. With the
+ * job queue running globally serially, cross-type collisions don't occur in
+ * normal flow — same-type preemption is a defensive measure for callers
+ * that fire the same request twice without waiting on the first.
+ *
+ * Unknown response types are dropped silently so the public `uiResponse`
+ * entry never throws.
+ */
+declare class UiRequestRegistry {
+    private pending;
+    wait<T = unknown>(requestType: string, options?: {
+        timeoutMs?: number;
+    }): Promise<T>;
+    resolve(responseType: string, payload: unknown): void;
+    cancel(requestType?: string): void;
+    reset(): void;
+    hasPending(requestType?: string): boolean;
+}
+
 /**
  * Compare two semver strings (e.g. "2.1.0" vs "2.3.1").
  * Returns -1 if a < b, 0 if equal, 1 if a > b.
@@ -1075,4 +1145,4 @@ declare function batchCall<TParam, TResult>(params: TParam[], callFn: (p: TParam
     total: number;
 }) => void): Promise<Response<TResult[]>>;
 
-export { type ActiveJobInfo, type BtcAddress, type BtcGetAddressParams, type BtcGetPublicKeyParams, type BtcPublicKey, type BtcRefTransaction, type BtcSignMsgParams, type BtcSignPsbtParams, type BtcSignTxParams, type BtcSignature, type BtcSignedPsbt, type BtcSignedTx, type BtcTxInput, type BtcTxOutput, CHAIN_FINGERPRINT_PATHS, type ChainCapability, type ChainForFingerprint, type ConnectionType, type ConnectorDevice, type ConnectorEventMap, type ConnectorEventType, type ConnectorSession, DEVICE, DEVICE_EVENT, type DeviceCapabilities, type DeviceChangeEvent, type DeviceConnectEvent, type DeviceDescriptor, type DeviceDisconnectEvent, type DeviceEvent, type DeviceEventListener, type DeviceInfo, DeviceJobQueue, type DeviceJobQueueDeps, type DeviceTarget, EConnectorInteraction, type EIP712Domain, type EvmAddress, type EvmGetAddressParams, type EvmSignMsgParams, type EvmSignTxParams, type EvmSignTypedDataFull, type EvmSignTypedDataHash, type EvmSignTypedDataParams, type EvmSignature, type EvmSignedTx, type Failure, HardwareErrorCode, type HardwareEvent, type HardwareEventMap, type IBtcMethods, type IConnector, type IEvmMethods, type IHardwareBridge, type IHardwareWallet, type ISolMethods, type ITronMethods, type Interruptibility, type JobOptions, type PassphraseResponse, type PreemptionDecision, type PreemptionEvent, type ProgressCallback, type QrDisplayData, type QrResponseData, type Response, SDK, type SdkEvent, type SolAddress, type SolGetAddressParams, type SolSignMsgParams, type SolSignTxParams, type SolSignature, type SolSignedTx, type Success, type TransportType, type TronAddress, type TronGetAddressParams, type TronSignMsgParams, type TronSignTxParams, type TronSignature, type TronSignedTx, TypedEventEmitter, UI_EVENT, UI_REQUEST, UI_REQUEST_CANCELLED_TAG, UI_REQUEST_DEFAULT_TIMEOUT_MS, UI_REQUEST_PREEMPTED_TAG, UI_REQUEST_TIMEOUT_TAG, UI_RESPONSE, type UiRequestEvent, UiRequestRegistry, type UiResponseEvent, type VendorType, batchCall, bytesToHex, compareSemver, createBridgedConnector, deriveDeviceFingerprint, enrichErrorMessage, ensure0x, failure, hexToBytes, padHex64, stripHex, success };
+export { type ActiveJobInfo, type BtcAddress, type BtcGetAddressParams, type BtcGetPublicKeyParams, type BtcPublicKey, type BtcRefTransaction, type BtcSignMsgParams, type BtcSignPsbtParams, type BtcSignTxParams, type BtcSignature, type BtcSignedPsbt, type BtcSignedTx, type BtcTxInput, type BtcTxOutput, CHAIN_FINGERPRINT_PATHS, type ChainCapability, type ChainForFingerprint, type ConnectionType, type ConnectorDevice, type ConnectorEventMap, type ConnectorEventType, type ConnectorSession, type ConnectorUiEvent, DEVICE, DEVICE_EVENT, type DeviceCapabilities, type DeviceChangeEvent, type DeviceConnectEvent, type DeviceDescriptor, type DeviceDisconnectEvent, type DeviceEvent, type DeviceEventListener, type DeviceInfo, DeviceJobQueue, type DevicePermissionDeniedReason, type DevicePermissionResponse, type DeviceTarget, EConnectorInteraction, type EIP712Domain, type EvmAddress, type EvmGetAddressParams, type EvmSignMsgParams, type EvmSignTxParams, type EvmSignTypedDataFull, type EvmSignTypedDataHash, type EvmSignTypedDataParams, type EvmSignature, type EvmSignedTx, type Failure, HardwareErrorCode, type HardwareEvent, type HardwareEventMap, type IBtcMethods, type IConnector, type IEvmMethods, type IHardwareBridge, type IHardwareWallet, type ISolMethods, type ITronMethods, type JobOptions, ORPHAN_ELIGIBLE_ERROR_CODES, type PassphraseResponse, type QrDisplayData, type QrResponseData, type Response, SDK, type SdkEvent, type SearchDevicesOptions, type SolAddress, type SolGetAddressParams, type SolSignMsgParams, type SolSignTxParams, type SolSignature, type SolSignedTx, type Success, type TransportType, type TronAddress, type TronGetAddressParams, type TronSignMsgParams, type TronSignTxParams, type TronSignature, type TronSignedTx, TypedEventEmitter, UI_EVENT, UI_REQUEST, UI_REQUEST_CANCELLED_TAG, UI_REQUEST_DEFAULT_TIMEOUT_MS, UI_REQUEST_PREEMPTED_TAG, UI_REQUEST_TIMEOUT_TAG, UI_RESPONSE, type UiRequestEvent, UiRequestRegistry, type UiResponseEvent, type VendorType, batchCall, bytesToHex, compareSemver, createBridgedConnector, deriveDeviceFingerprint, enrichErrorMessage, ensure0x, failure, hexToBytes, padHex64, stripHex, success };