@obsunified/collector 2.0.1

package/src/otlp/decode.ts

@@ -0,0 +1,11 @@
+export type { OtlpWireFormat, ReadBodyResult } from "./decode/body";
+export { OtlpDecodeError, readOtlpBody } from "./decode/body";
+export type { DecodedLogRecord } from "./decode/logs";
+export { decodeLogsRequest } from "./decode/logs";
+export type {
+	DecodedExemplar,
+	DecodedMetricPoint,
+	MetricType,
+} from "./decode/metrics";
+export { decodeMetricsRequest } from "./decode/metrics";
+export { decodeTraceRequest } from "./decode/traces";

package/src/otlp/gen/opentelemetry/proto/collector/logs/v1/logs_service_pb.ts

@@ -0,0 +1,132 @@
+// Copyright 2020, OpenTelemetry Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+
+// @generated by protoc-gen-es v2.11.0 with parameter "target=ts,import_extension=js"
+// @generated from file opentelemetry/proto/collector/logs/v1/logs_service.proto (package opentelemetry.proto.collector.logs.v1, syntax proto3)
+/* eslint-disable */
+
+import type { Message } from "@bufbuild/protobuf";
+import type {
+	GenFile,
+	GenMessage,
+	GenService,
+} from "@bufbuild/protobuf/codegenv2";
+import {
+	fileDesc,
+	messageDesc,
+	serviceDesc,
+} from "@bufbuild/protobuf/codegenv2";
+import type { ResourceLogs } from "../../../logs/v1/logs_pb.js";
+import { file_opentelemetry_proto_logs_v1_logs } from "../../../logs/v1/logs_pb.js";
+
+/**
+ * Describes the file opentelemetry/proto/collector/logs/v1/logs_service.proto.
+ */
+export const file_opentelemetry_proto_collector_logs_v1_logs_service: GenFile =
+	/*@__PURE__*/
+	fileDesc(
+		"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",
+		[file_opentelemetry_proto_logs_v1_logs],
+	);
+
+/**
+ * @generated from message opentelemetry.proto.collector.logs.v1.ExportLogsServiceRequest
+ */
+export type ExportLogsServiceRequest =
+	Message<"opentelemetry.proto.collector.logs.v1.ExportLogsServiceRequest"> & {
+		/**
+		 * An array of ResourceLogs.
+		 * For data coming from a single resource this array will typically
+		 * contain one element. Intermediary nodes (such as OpenTelemetry
+		 * Collector) that receive data from multiple origins typically batch
+		 * the data before forwarding further.
+		 *
+		 * @generated from field: repeated opentelemetry.proto.logs.v1.ResourceLogs resource_logs = 1;
+		 */
+		resourceLogs: ResourceLogs[];
+	};
+
+/**
+ * Describes the message opentelemetry.proto.collector.logs.v1.ExportLogsServiceRequest.
+ * Use `create(ExportLogsServiceRequestSchema)` to create a new message.
+ */
+export const ExportLogsServiceRequestSchema: GenMessage<ExportLogsServiceRequest> =
+	/*@__PURE__*/
+	messageDesc(file_opentelemetry_proto_collector_logs_v1_logs_service, 0);
+
+/**
+ * @generated from message opentelemetry.proto.collector.logs.v1.ExportLogsServiceResponse
+ */
+export type ExportLogsServiceResponse =
+	Message<"opentelemetry.proto.collector.logs.v1.ExportLogsServiceResponse"> & {
+		/**
+		 * The details of a partially successful export request.
+		 *
+		 * @generated from field: opentelemetry.proto.collector.logs.v1.ExportLogsPartialSuccess partial_success = 1;
+		 */
+		partialSuccess?: ExportLogsPartialSuccess;
+	};
+
+/**
+ * Describes the message opentelemetry.proto.collector.logs.v1.ExportLogsServiceResponse.
+ * Use `create(ExportLogsServiceResponseSchema)` to create a new message.
+ */
+export const ExportLogsServiceResponseSchema: GenMessage<ExportLogsServiceResponse> =
+	/*@__PURE__*/
+	messageDesc(file_opentelemetry_proto_collector_logs_v1_logs_service, 1);
+
+/**
+ * @generated from message opentelemetry.proto.collector.logs.v1.ExportLogsPartialSuccess
+ */
+export type ExportLogsPartialSuccess =
+	Message<"opentelemetry.proto.collector.logs.v1.ExportLogsPartialSuccess"> & {
+		/**
+		 * The number of rejected log records.
+		 *
+		 * A `rejected_<signal>` field holding a `0` value indicates that the
+		 * request was fully accepted.
+		 *
+		 * @generated from field: int64 rejected_log_records = 1;
+		 */
+		rejectedLogRecords: bigint;
+
+		/**
+		 * A developer-facing human-readable message in English.
+		 *
+		 * @generated from field: string error_message = 2;
+		 */
+		errorMessage: string;
+	};
+
+/**
+ * Describes the message opentelemetry.proto.collector.logs.v1.ExportLogsPartialSuccess.
+ * Use `create(ExportLogsPartialSuccessSchema)` to create a new message.
+ */
+export const ExportLogsPartialSuccessSchema: GenMessage<ExportLogsPartialSuccess> =
+	/*@__PURE__*/
+	messageDesc(file_opentelemetry_proto_collector_logs_v1_logs_service, 2);
+
+/**
+ * Service that can be used to push logs between one Application
+ * instrumented with OpenTelemetry and a collector, or between a
+ * collector and a central collector.
+ *
+ * @generated from service opentelemetry.proto.collector.logs.v1.LogsService
+ */
+export const LogsService: GenService<{
+	/**
+	 * @generated from rpc opentelemetry.proto.collector.logs.v1.LogsService.Export
+	 */
+	export: {
+		methodKind: "unary";
+		input: typeof ExportLogsServiceRequestSchema;
+		output: typeof ExportLogsServiceResponseSchema;
+	};
+}> =
+	/*@__PURE__*/
+	serviceDesc(file_opentelemetry_proto_collector_logs_v1_logs_service, 0);

package/src/otlp/gen/opentelemetry/proto/collector/metrics/v1/metrics_service_pb.ts

@@ -0,0 +1,158 @@
+// Copyright 2019, OpenTelemetry Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// @generated by protoc-gen-es v2.11.0 with parameter "target=ts,import_extension=js"
+// @generated from file opentelemetry/proto/collector/metrics/v1/metrics_service.proto (package opentelemetry.proto.collector.metrics.v1, syntax proto3)
+/* eslint-disable */
+
+import type { Message } from "@bufbuild/protobuf";
+import type {
+	GenFile,
+	GenMessage,
+	GenService,
+} from "@bufbuild/protobuf/codegenv2";
+import {
+	fileDesc,
+	messageDesc,
+	serviceDesc,
+} from "@bufbuild/protobuf/codegenv2";
+import type { ResourceMetrics } from "../../../metrics/v1/metrics_pb.js";
+import { file_opentelemetry_proto_metrics_v1_metrics } from "../../../metrics/v1/metrics_pb.js";
+
+/**
+ * Describes the file opentelemetry/proto/collector/metrics/v1/metrics_service.proto.
+ */
+export const file_opentelemetry_proto_collector_metrics_v1_metrics_service: GenFile =
+	/*@__PURE__*/
+	fileDesc(
+		"Cj5vcGVudGVsZW1ldHJ5L3Byb3RvL2NvbGxlY3Rvci9tZXRyaWNzL3YxL21ldHJpY3Nfc2VydmljZS5wcm90bxIob3BlbnRlbGVtZXRyeS5wcm90by5jb2xsZWN0b3IubWV0cmljcy52MSJoChtFeHBvcnRNZXRyaWNzU2VydmljZVJlcXVlc3QSSQoQcmVzb3VyY2VfbWV0cmljcxgBIAMoCzIvLm9wZW50ZWxlbWV0cnkucHJvdG8ubWV0cmljcy52MS5SZXNvdXJjZU1ldHJpY3MifgocRXhwb3J0TWV0cmljc1NlcnZpY2VSZXNwb25zZRJeCg9wYXJ0aWFsX3N1Y2Nlc3MYASABKAsyRS5vcGVudGVsZW1ldHJ5LnByb3RvLmNvbGxlY3Rvci5tZXRyaWNzLnYxLkV4cG9ydE1ldHJpY3NQYXJ0aWFsU3VjY2VzcyJSChtFeHBvcnRNZXRyaWNzUGFydGlhbFN1Y2Nlc3MSHAoUcmVqZWN0ZWRfZGF0YV9wb2ludHMYASABKAMSFQoNZXJyb3JfbWVzc2FnZRgCIAEoCTKsAQoOTWV0cmljc1NlcnZpY2USmQEKBkV4cG9ydBJFLm9wZW50ZWxlbWV0cnkucHJvdG8uY29sbGVjdG9yLm1ldHJpY3MudjEuRXhwb3J0TWV0cmljc1NlcnZpY2VSZXF1ZXN0GkYub3BlbnRlbGVtZXRyeS5wcm90by5jb2xsZWN0b3IubWV0cmljcy52MS5FeHBvcnRNZXRyaWNzU2VydmljZVJlc3BvbnNlIgBCpAEKK2lvLm9wZW50ZWxlbWV0cnkucHJvdG8uY29sbGVjdG9yLm1ldHJpY3MudjFCE01ldHJpY3NTZXJ2aWNlUHJvdG9QAVozZ28ub3BlbnRlbGVtZXRyeS5pby9wcm90by9vdGxwL2NvbGxlY3Rvci9tZXRyaWNzL3YxqgIoT3BlblRlbGVtZXRyeS5Qcm90by5Db2xsZWN0b3IuTWV0cmljcy5WMWIGcHJvdG8z",
+		[file_opentelemetry_proto_metrics_v1_metrics],
+	);
+
+/**
+ * @generated from message opentelemetry.proto.collector.metrics.v1.ExportMetricsServiceRequest
+ */
+export type ExportMetricsServiceRequest =
+	Message<"opentelemetry.proto.collector.metrics.v1.ExportMetricsServiceRequest"> & {
+		/**
+		 * An array of ResourceMetrics.
+		 * For data coming from a single resource this array will typically contain one
+		 * element. Intermediary nodes (such as OpenTelemetry Collector) that receive
+		 * data from multiple origins typically batch the data before forwarding further and
+		 * in that case this array will contain multiple elements.
+		 *
+		 * @generated from field: repeated opentelemetry.proto.metrics.v1.ResourceMetrics resource_metrics = 1;
+		 */
+		resourceMetrics: ResourceMetrics[];
+	};
+
+/**
+ * Describes the message opentelemetry.proto.collector.metrics.v1.ExportMetricsServiceRequest.
+ * Use `create(ExportMetricsServiceRequestSchema)` to create a new message.
+ */
+export const ExportMetricsServiceRequestSchema: GenMessage<ExportMetricsServiceRequest> =
+	/*@__PURE__*/
+	messageDesc(file_opentelemetry_proto_collector_metrics_v1_metrics_service, 0);
+
+/**
+ * @generated from message opentelemetry.proto.collector.metrics.v1.ExportMetricsServiceResponse
+ */
+export type ExportMetricsServiceResponse =
+	Message<"opentelemetry.proto.collector.metrics.v1.ExportMetricsServiceResponse"> & {
+		/**
+		 * The details of a partially successful export request.
+		 *
+		 * If the request is only partially accepted
+		 * (i.e. when the server accepts only parts of the data and rejects the rest)
+		 * the server MUST initialize the `partial_success` field and MUST
+		 * set the `rejected_<signal>` with the number of items it rejected.
+		 *
+		 * Servers MAY also make use of the `partial_success` field to convey
+		 * warnings/suggestions to senders even when the request was fully accepted.
+		 * In such cases, the `rejected_<signal>` MUST have a value of `0` and
+		 * the `error_message` MUST be non-empty.
+		 *
+		 * A `partial_success` message with an empty value (rejected_<signal> = 0 and
+		 * `error_message` = "") is equivalent to it not being set/present. Senders
+		 * SHOULD interpret it the same way as in the full success case.
+		 *
+		 * @generated from field: opentelemetry.proto.collector.metrics.v1.ExportMetricsPartialSuccess partial_success = 1;
+		 */
+		partialSuccess?: ExportMetricsPartialSuccess;
+	};
+
+/**
+ * Describes the message opentelemetry.proto.collector.metrics.v1.ExportMetricsServiceResponse.
+ * Use `create(ExportMetricsServiceResponseSchema)` to create a new message.
+ */
+export const ExportMetricsServiceResponseSchema: GenMessage<ExportMetricsServiceResponse> =
+	/*@__PURE__*/
+	messageDesc(file_opentelemetry_proto_collector_metrics_v1_metrics_service, 1);
+
+/**
+ * @generated from message opentelemetry.proto.collector.metrics.v1.ExportMetricsPartialSuccess
+ */
+export type ExportMetricsPartialSuccess =
+	Message<"opentelemetry.proto.collector.metrics.v1.ExportMetricsPartialSuccess"> & {
+		/**
+		 * The number of rejected data points.
+		 *
+		 * A `rejected_<signal>` field holding a `0` value indicates that the
+		 * request was fully accepted.
+		 *
+		 * @generated from field: int64 rejected_data_points = 1;
+		 */
+		rejectedDataPoints: bigint;
+
+		/**
+		 * A developer-facing human-readable message in English. It should be used
+		 * either to explain why the server rejected parts of the data during a partial
+		 * success or to convey warnings/suggestions during a full success. The message
+		 * should offer guidance on how users can address such issues.
+		 *
+		 * error_message is an optional field. An error_message with an empty value
+		 * is equivalent to it not being set.
+		 *
+		 * @generated from field: string error_message = 2;
+		 */
+		errorMessage: string;
+	};
+
+/**
+ * Describes the message opentelemetry.proto.collector.metrics.v1.ExportMetricsPartialSuccess.
+ * Use `create(ExportMetricsPartialSuccessSchema)` to create a new message.
+ */
+export const ExportMetricsPartialSuccessSchema: GenMessage<ExportMetricsPartialSuccess> =
+	/*@__PURE__*/
+	messageDesc(file_opentelemetry_proto_collector_metrics_v1_metrics_service, 2);
+
+/**
+ * Service that can be used to push metrics between one Application
+ * instrumented with OpenTelemetry and a collector, or between a collector and a
+ * central collector.
+ *
+ * @generated from service opentelemetry.proto.collector.metrics.v1.MetricsService
+ */
+export const MetricsService: GenService<{
+	/**
+	 * @generated from rpc opentelemetry.proto.collector.metrics.v1.MetricsService.Export
+	 */
+	export: {
+		methodKind: "unary";
+		input: typeof ExportMetricsServiceRequestSchema;
+		output: typeof ExportMetricsServiceResponseSchema;
+	};
+}> =
+	/*@__PURE__*/
+	serviceDesc(file_opentelemetry_proto_collector_metrics_v1_metrics_service, 0);

package/src/otlp/gen/opentelemetry/proto/collector/trace/v1/trace_service_pb.ts

@@ -0,0 +1,158 @@
+// Copyright 2019, OpenTelemetry Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// @generated by protoc-gen-es v2.11.0 with parameter "target=ts,import_extension=js"
+// @generated from file opentelemetry/proto/collector/trace/v1/trace_service.proto (package opentelemetry.proto.collector.trace.v1, syntax proto3)
+/* eslint-disable */
+
+import type { Message } from "@bufbuild/protobuf";
+import type {
+	GenFile,
+	GenMessage,
+	GenService,
+} from "@bufbuild/protobuf/codegenv2";
+import {
+	fileDesc,
+	messageDesc,
+	serviceDesc,
+} from "@bufbuild/protobuf/codegenv2";
+import type { ResourceSpans } from "../../../trace/v1/trace_pb.js";
+import { file_opentelemetry_proto_trace_v1_trace } from "../../../trace/v1/trace_pb.js";
+
+/**
+ * Describes the file opentelemetry/proto/collector/trace/v1/trace_service.proto.
+ */
+export const file_opentelemetry_proto_collector_trace_v1_trace_service: GenFile =
+	/*@__PURE__*/
+	fileDesc(
+		"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",
+		[file_opentelemetry_proto_trace_v1_trace],
+	);
+
+/**
+ * @generated from message opentelemetry.proto.collector.trace.v1.ExportTraceServiceRequest
+ */
+export type ExportTraceServiceRequest =
+	Message<"opentelemetry.proto.collector.trace.v1.ExportTraceServiceRequest"> & {
+		/**
+		 * An array of ResourceSpans.
+		 * For data coming from a single resource this array will typically contain one
+		 * element. Intermediary nodes (such as OpenTelemetry Collector) that receive
+		 * data from multiple origins typically batch the data before forwarding further and
+		 * in that case this array will contain multiple elements.
+		 *
+		 * @generated from field: repeated opentelemetry.proto.trace.v1.ResourceSpans resource_spans = 1;
+		 */
+		resourceSpans: ResourceSpans[];
+	};
+
+/**
+ * Describes the message opentelemetry.proto.collector.trace.v1.ExportTraceServiceRequest.
+ * Use `create(ExportTraceServiceRequestSchema)` to create a new message.
+ */
+export const ExportTraceServiceRequestSchema: GenMessage<ExportTraceServiceRequest> =
+	/*@__PURE__*/
+	messageDesc(file_opentelemetry_proto_collector_trace_v1_trace_service, 0);
+
+/**
+ * @generated from message opentelemetry.proto.collector.trace.v1.ExportTraceServiceResponse
+ */
+export type ExportTraceServiceResponse =
+	Message<"opentelemetry.proto.collector.trace.v1.ExportTraceServiceResponse"> & {
+		/**
+		 * The details of a partially successful export request.
+		 *
+		 * If the request is only partially accepted
+		 * (i.e. when the server accepts only parts of the data and rejects the rest)
+		 * the server MUST initialize the `partial_success` field and MUST
+		 * set the `rejected_<signal>` with the number of items it rejected.
+		 *
+		 * Servers MAY also make use of the `partial_success` field to convey
+		 * warnings/suggestions to senders even when the request was fully accepted.
+		 * In such cases, the `rejected_<signal>` MUST have a value of `0` and
+		 * the `error_message` MUST be non-empty.
+		 *
+		 * A `partial_success` message with an empty value (rejected_<signal> = 0 and
+		 * `error_message` = "") is equivalent to it not being set/present. Senders
+		 * SHOULD interpret it the same way as in the full success case.
+		 *
+		 * @generated from field: opentelemetry.proto.collector.trace.v1.ExportTracePartialSuccess partial_success = 1;
+		 */
+		partialSuccess?: ExportTracePartialSuccess;
+	};
+
+/**
+ * Describes the message opentelemetry.proto.collector.trace.v1.ExportTraceServiceResponse.
+ * Use `create(ExportTraceServiceResponseSchema)` to create a new message.
+ */
+export const ExportTraceServiceResponseSchema: GenMessage<ExportTraceServiceResponse> =
+	/*@__PURE__*/
+	messageDesc(file_opentelemetry_proto_collector_trace_v1_trace_service, 1);
+
+/**
+ * @generated from message opentelemetry.proto.collector.trace.v1.ExportTracePartialSuccess
+ */
+export type ExportTracePartialSuccess =
+	Message<"opentelemetry.proto.collector.trace.v1.ExportTracePartialSuccess"> & {
+		/**
+		 * The number of rejected spans.
+		 *
+		 * A `rejected_<signal>` field holding a `0` value indicates that the
+		 * request was fully accepted.
+		 *
+		 * @generated from field: int64 rejected_spans = 1;
+		 */
+		rejectedSpans: bigint;
+
+		/**
+		 * A developer-facing human-readable message in English. It should be used
+		 * either to explain why the server rejected parts of the data during a partial
+		 * success or to convey warnings/suggestions during a full success. The message
+		 * should offer guidance on how users can address such issues.
+		 *
+		 * error_message is an optional field. An error_message with an empty value
+		 * is equivalent to it not being set.
+		 *
+		 * @generated from field: string error_message = 2;
+		 */
+		errorMessage: string;
+	};
+
+/**
+ * Describes the message opentelemetry.proto.collector.trace.v1.ExportTracePartialSuccess.
+ * Use `create(ExportTracePartialSuccessSchema)` to create a new message.
+ */
+export const ExportTracePartialSuccessSchema: GenMessage<ExportTracePartialSuccess> =
+	/*@__PURE__*/
+	messageDesc(file_opentelemetry_proto_collector_trace_v1_trace_service, 2);
+
+/**
+ * Service that can be used to push spans between one Application instrumented with
+ * OpenTelemetry and a collector, or between a collector and a central collector (in this
+ * case spans are sent/received to/from multiple Applications).
+ *
+ * @generated from service opentelemetry.proto.collector.trace.v1.TraceService
+ */
+export const TraceService: GenService<{
+	/**
+	 * @generated from rpc opentelemetry.proto.collector.trace.v1.TraceService.Export
+	 */
+	export: {
+		methodKind: "unary";
+		input: typeof ExportTraceServiceRequestSchema;
+		output: typeof ExportTraceServiceResponseSchema;
+	};
+}> =
+	/*@__PURE__*/
+	serviceDesc(file_opentelemetry_proto_collector_trace_v1_trace_service, 0);