@nylorun/admin 0.17.1-beta → 0.19.0-beta

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
package/CHANGELOG.md CHANGED
@@ -1,5 +1,126 @@
1
1
  # Changelog
2
2
 
3
+ ## 0.19.0-beta
4
+
5
+ ### Minor Changes
6
+
7
+ - 22c61ce: Protocol 16, Agents from one manifest (track T2), a fresh start. An agent manifest (v8) is one versioned document at `/v1/agent-manifests/{name}` with a `harness` section (what runs inside the loop, including the harness's id) and a `runtime` section (what an environment manifest said). The Runtime checks the two against each other when it is saved (`422 manifest_inconsistent` with `details.gaps`), in place of `requires` at session open. Agent definitions and environment manifests are gone.
8
+
9
+ Environments are Agents: `/v1/agents/{id}` and its sub-routes, made from a saved manifest only (`manifest: "name"` tracks it, `"name@n"` pins a version; either resolves once, into `resolvedVersion`), with a derived `state` (`working`, `sleeping`, `input_required`, `failing`, `paused`) and `attention`. Every session runs on one Agent (`PUT /v1/sessions/{id} { agent, ownerUserId }`) and pins its manifest version. No session is special (D71). Error codes, events (`agent.*`), scopes (`agents:write`, `agent-manifests:write`) and identity-file grants (`agents`) say Agent; model budget scope `agent` is `manifest`. Harness API 5: `turn.start.agent` replaces `turn.start.environment`, with `definition` and `loop`. Migration 0032 closes older sessions (`protocol_16`) and drops Environments with their disks and vaults.
10
+
11
+ The SDK has `client.agentManifests`, `client.agents` and `composeManifest(dir)` for three-file authoring; the CLI has `nylorun apply`, `nylorun agent-manifests`, `nylorun agents` and `nylorun migrate v8`; Studio has an Agents screen, an Agent page and an Agent manifests screen. See MIGRATION.md.
12
+
13
+ ### Patch Changes
14
+
15
+ - 4fa160d: Agent memory, storage and API (track T5, D72). An agent manifest's `harness.memory` (`access`: `read_write` or `read_only`; `instructions`, at most 4,096 characters) turns on the Agent's memory: Markdown files under `/memories` it keeps across sessions, wakes and upgrades. The Runtime keeps them in Postgres (`memories`, `memory_versions`, migration 0036) with a version per change and who made it. `GET /v1/agents/{id}/memories` lists them (`pathPrefix`), `GET`, `PUT` (whole content, with an optional `contentSha256` precondition: `409 memory_conflict`) and `DELETE /v1/agents/{id}/memories/{path}` read, write and delete one (or a folder), and `GET /v1/agents/{id}/memory_versions` and `.../memory_versions/{versionId}` page the versions. A fork copies the memories (the fork plan adds `memories`); a delete removes them. `@nylorun/core` adds `memoryPathOf`, `memoryDescriptionOf` and the memory contracts; new Runtime limits `memoryBytes` (100 KB) and `memoriesPerAgent` (10,000); new error code `memory_conflict`. The SDK adds `client.agents.memories`; the CLI adds `nylorun agents memories ls|cat|put|rm|versions`. The model's `memory` tool arrives in the next steps of T5.
16
+ - ffeb3bb: `schedule_wake` (track T4, D77). An agent manifest's `runtime.selfWake: true` offers the agent `schedule_wake`: `{in | at, note}` books its session's next turn, replacing the booking before, and `{cancel: true}` removes it. The Runtime serves the call in its own transaction (a new effect target, `{kind: "runtime", operation: "schedule_wake"}`, additive on Harness API 5; `turn.start.agent.selfWake` tells a harness to offer it), so a replayed turn books once. The booking fires as a trigger run of kind `wake`, its note the turn's message with `cause.kind: "self"`. New session events `wake.booked` and `wake.cancelled`, tool call kind `runtime`, and Runtime limits `wakeMaxAheadMs` and `wakeNoteChars`.
17
+ - f85483d: Triggers (track T4, D74). An agent manifest's `runtime.triggers` declares `schedule` (cron with an IANA `timezone`) and `at` triggers, each with the session its runs go to (a session id, opened on the first run, or `new` for a session per run) and its prompt. They start active with a new Agent, fire on a durable timer per trigger with Postgres as the truth (one late fire after downtime, never a backfill, a fixed jitter per trigger), and each fire is a run (`started`, `queued`, `skipped` or `failed`, with a reason) at `GET /v1/agents/{id}/runs`. A schedule adds at most one queued message to a busy session. `GET /v1/agents/{id}/triggers` and `POST .../triggers/{triggerId}/pause`, `/resume` and `/run` (with an `Idempotency-Key`); Agent reads add `nextWakeAt`, and the Agent's stream adds `agent.run`, `agent.trigger_paused` and `agent.trigger_resumed`. New Runtime limits: `triggersPerAgent`, `triggerMinIntervalMs` and `triggerRunRetentionMs` (with floors), `triggerRunsPerHour`, `triggerJitterPercent`, `triggerJitterMaxMs`, `triggerPromptChars`; Host tuning `triggers.lateGraceMs` and `triggers.intervalCheckFires`. The SDK's `client.agents` adds `triggers`, `pauseTrigger`, `resumeTrigger`, `runTrigger` and `runs`; the CLI adds `nylorun agents triggers` and `nylorun agents runs`.
18
+ - ae54de7: Webhook triggers (track T4, D75). A `webhook: "standard-webhooks"` trigger has an endpoint, `POST /v1/webhooks/{endpointId}`, an anonymous, unversioned route that takes any body up to the new Runtime limit `webhookBodyBytes` and verifies Standard Webhooks (`webhook-id`, `webhook-timestamp` within the Host's `triggers.webhookToleranceMs`, `webhook-signature`) in the keys service, which alone opens the trigger's sealed secret; anything else is `401` and writes nothing. A delivery runs the trigger once per `webhook-id` (`202 {runId, status}`); a paused trigger answers a signed one `409 trigger_paused`. `POST /v1/agents/{id}/triggers/{triggerId}/secret` makes or replaces the `whsec_` secret, shown once (`agent.trigger_secret_rotated`); trigger reads show `webhookUrl` and `secretSet`. The payload reaches the model under the trigger's prompt in a labelled `<trigger-payload>` block. The SDK adds `agents.rotateWebhookSecret`, and the CLI `nylorun agents triggers new-secret`.
19
+ - Pin core to the tested release.
20
+ - Updated dependencies [218b078]
21
+ - Updated dependencies [22c61ce]
22
+ - Updated dependencies [1ded443]
23
+ - Updated dependencies [76dcd11]
24
+ - Updated dependencies [bf942ed]
25
+ - Updated dependencies [4fa160d]
26
+ - Updated dependencies [9fed948]
27
+ - Updated dependencies [ffeb3bb]
28
+ - Updated dependencies [9e60e40]
29
+ - Updated dependencies [f85483d]
30
+ - Updated dependencies [ae54de7]
31
+ - @nylorun/core@0.24.0-beta
32
+
33
+ ## 0.18.0-beta
34
+
35
+ ### Minor Changes
36
+
37
+ - 0a2fbc5: **Artifacts reach the harness through the Harness API; `read_artifact` and `save_artifact` run in the harness (protocol 15, Harness API 4).** The first step of the harness boundary: model-facing work belongs to the harness, and the Runtime offers primitives and holds limits and access. A fresh start for agent sessions: the Runtime speaks protocol 15 only. See MIGRATION.md.
38
+
39
+ - **The artifact seam.** A harness reads and writes the artifacts of the run it holds: `artifact.read {artifactId, version?, offset?, length?}` answers the version's metadata (`ArtifactMetaSchema`) and its bytes from `offset`, at most `turn.start.limits.chunkBytes`; `artifact.write` (`begin`, `chunk`, `commit`, `abort`) makes a file artifact of the session or a new version of one of its own, streamed with backpressure into the Object store and committed in Postgres within the Tenant's and the Environment's artifact limits. The scope is always the run's session: its own artifacts, and the Tenant-wide ones its messages named; anything else is the new error code `not_found`, alike. A write's `key` makes it idempotent within the session (`artifact_versions.write_key`, migration 0028), and its `effectId` links the artifact to a tool call of the turn, whose call id `artifact.created` carries. An upload the run leaves open commits nothing. Client helpers: `readArtifact`, `openArtifactWrite`, `writeArtifactBytes`, `toBase64` and `fromBase64` in `@nylorun/core/harness-api`.
40
+ - **Our harness runs the artifact tools.** `read_artifact` (every agent) and `save_artifact` (with a sandbox) are our engine's tools, defined in `@nylorun/harness` (`artifactToolsFor`, `runArtifactTool`) and run over the seam and the run's sandbox files (`HarnessExecutors.files`, `SandboxManager.writeBytes`); their calls are kind `harness`. `save_artifact` keys its write by its effect id. `read_artifact` takes `path` with a sandbox, which copies the whole artifact into it, and hands a file of any other type to the model as a file of the result (the Model Gate writes the note for one the model does not read; `artifact.unsupported` is gone). Its page is harness configuration, `createHarness({ artifactPageBytes })` (32 KiB by default), and now always ends on a whole character. `runDurable` takes `engineTools`; `apiHost` takes the engine's configuration.
41
+ - **The Runtime pins no artifact tools.** `runtimeManifestFor` has no `save` or `read`; `RUNTIME_TOOL_NAMES` no longer holds the two names, so an author tool may take one (our harness then refuses the turn). A session without a sandbox or skills pins its definition unchanged. Core no longer runs either tool (`tenant/artifact-tool.ts` is gone). Migration 0029 closes every agent session that pinned them (`closedReason: "protocol_15"`, `409 session_closed`); workflow sessions carry over.
42
+ - **Media types are core's.** `contentTypeFor`, `essence`, `normalizeContentType`, `isText`, `isModelImage`, `modelInputOf`, `inputLabel`, `extensionFor`, `unreadableReason`, `MODEL_IMAGE_TYPES` and `DEFAULT_CONTENT_TYPE` are exported from `@nylorun/core/contracts`, for the Runtime and harnesses alike.
43
+ - `PROTOCOL_VERSION` 15 with required feature `harness-boundary`; `HARNESS_API_VERSION` 4. The SDKs and the CLI send protocol 15.
44
+
45
+ - b1e815d: **Runtime limits are a Tenant setting, and harnesses get them in `turn.start.limits`.**
46
+
47
+ - What one record entry, model call, model file, tool answer, custom harness state and Harness API chunk may hold is the new Management API setting `GET`/`PUT /v1/tenant/limits` (`{ limits: { recordEntryBytes, modelCallBytes, modelFileBytes, toolAnswerBytes, harnessStateBytes, chunkBytes } }`), also `admin.settings.limits` and `nylorun tenant settings limits [get | put <file|->]`.
48
+ - The defaults are today's sizes (`RUNTIME_LIMIT_DEFAULTS`): 960 KiB, 32 MiB, 8 MiB, 8 MiB, 256 KiB and 16 MiB. A limit left out of a `PUT` takes its default.
49
+ - Each limit has a ceiling a dependency sets (`RUNTIME_LIMIT_CEILINGS`): S2's 1 MiB record less 64 KiB for the event's envelope, the 64 MiB Harness API frame, the longest JavaScript string. A limit above its ceiling is `400`, naming the ceiling.
50
+ - Each is read from the Tenant's database where it is checked; nothing keeps it.
51
+ - **The record holds every write to `recordEntryBytes`.** An event whose payload, or an effect outcome whose value, is larger, whoever wrote it, is refused with `limit_exceeded`: `413` (`details.limit: "recordEntryBytes"`) to an API client, the new Harness API error code `limit_exceeded` to a harness. A harness's claimed event past it is refused rather than dropped. Before, such an event reached a record S2 could not take.
52
+ - **The gates read the setting.** The Model Gate refuses a body past `modelCallBytes` and a file past `modelFileBytes`; the Tool Gate keeps no MCP or HTTP answer past `toolAnswerBytes` (`mcp.too-large`, `http.too-large`) and reads no tool body past it. A custom harness's state past `harnessStateBytes` fails its turn with `limit_exceeded` (it was `invalid`), and a `definition.file` range longer than `chunkBytes` is `limit_exceeded`. Core's step budget for tool results is unchanged (256 KiB), or half `recordEntryBytes` when that is less.
53
+ - **`turn.start` carries `limits`** (`RuntimeLimitsSchema`), the limits in force when the segment started. Harness API 3 and protocol 14 are unchanged, but `TurnStartSchema` is strict: a harness built against an older `@nylorun/core` refuses a `turn.start` with `limits`, so upgrade a custom harness with the Runtime. Our harness asks for skill files `limits.chunkBytes` at a time, and holds MCP answers on its own connections to `limits.toolAnswerBytes`. `createHarness` takes `onStart(grant, start)`.
54
+ - **Removed exports:** `MAX_MODEL_CALL_BYTES`, `MAX_TOOL_BODY_BYTES`, `MAX_HARNESS_STATE_BYTES` and `DEFINITION_FILE_CHUNK_BYTES` from `@nylorun/core`. Added: `RuntimeLimitsSchema`, `RUNTIME_LIMIT_DEFAULTS`, `RUNTIME_LIMIT_CEILINGS`, `runtimeLimitsOf`, `runtimeLimitIssues`, `limitExceededMessage`, `S2_RECORD_MAX_BYTES`, `RECORD_ENVELOPE_RESERVE_BYTES`, `JS_STRING_MAX_LENGTH` and the `TenantLimits*` schemas.
55
+
56
+ - f2e9b0a: **Skill and artifact limits are set per Tenant and per Environment manifest; a skill holds up to 2 GiB by default, with no limit per file or on the number of files.**
57
+
58
+ - The 10 MiB limit per skill file and the 500-file limit are gone. A skill's files may hold up to the Tenant's skill limit together: 2 GiB by default (`SKILL_TOTAL_BYTES_DEFAULT`). A file at two paths counts twice, since a sandbox holds both copies. `SKILL_FILES_MAX` and `DEFINITION_FILE_MAX_BYTES` are no longer exported.
59
+ - The Tenant's skill limit is the new Management API setting `GET`/`PUT /v1/tenant/skills` (`{ limits: { totalBytes } }`), also available as `admin.settings.skills` and `nylorun tenant settings skills [get | put <file|->]`.
60
+ - `PUT /v1/files/sha256:<hex>` takes a file up to that limit.
61
+ - `PUT /v1/agents/{id}` refuses a skill over it, an agent used as a tool included: `413 limit_exceeded`, with `details.skills` listing each skill and its size.
62
+ - An environment manifest, or the inline fields of `PUT /v1/environments/{id}`, may set `limits`: `artifacts.fileBytes`, `artifacts.totalBytes` and `skills.totalBytes`. Like the manifest's other fields, they are fixed for the Environment's life.
63
+ - Each limit must be at most the Tenant's. A higher one is refused with `400` when the Environment is made or the manifest is saved.
64
+ - A limit left out is the Tenant's at the time it is checked. A Tenant that lowers a limit lowers it for every Environment.
65
+ - The Environment view's new `limits` field gives the limits in force.
66
+ - An Environment's artifacts are its sessions' artifacts and its disk versions. Uploads, `save_artifact`, turn-end exports and disk snapshots hold them to the Environment's per-file limit and to its own total, as well as to the Tenant's total. A turn-end export past the Environment's total is skipped with the new reason `environment_total`, and a disk snapshot past it is `413` with `details.limit: "environment_total"`.
67
+ - A session opens on an Environment only when its agent's skills fit the Environment's skill limit; otherwise it is `409 environment_unsuitable`, with `details.skills`.
68
+ - `PUT /v1/files` streams the body to the Object store instead of holding it in memory. Only bytes that match the named hash reach the file's key. Environment files named by hash are held to the same per-file maximum.
69
+ - `@nylorun/agents`: loading a skills folder no longer checks a size, since the limit is the Tenant's; the Runtime refuses an oversized skill. The `skills.file-too-large` and `skills.too-many-files` errors are gone. Files are hashed and read a chunk at a time.
70
+ - Sandboxes get skill files as a stream. A harness fetches them from core 16 MiB at a time: `definition.file` takes optional `offset` and `length` (at most the Runtime limit `chunkBytes`).
71
+ - `load_skill` and `read_skill_resource` read files of up to 10 MiB into the model's context. A larger file fails with `skill.resource_too_large`, and the error names the file's path in the sandbox when there is one.
72
+
73
+ ### Patch Changes
74
+
75
+ - f443475: **The harness builds the MCP tool list and shapes tool results; tools are identified by server and tool (protocol 15).** The fourth step of the harness boundary, still protocol 15 and Harness API 4. See MIGRATION.md.
76
+
77
+ - **Tools have an identity.** An MCP tool call's target is `{kind: "mcp", server, tool}` (the server's own name for the tool) and an HTTP tool call's `{kind: "http", tool}` (its declared name); `platform` is gone. `toolName` is the model's name, for display. The record checks an MCP call against the session's discovery (`tool.unknown`) and the turn's tool settings (`tool.disabled`), and `tool.completed`, tool-call rows (`tool`), approvals (`Approve server / tool?`, `interaction.tool`) and traces (`nylorun.tool.identity`) carry the identity. The Tool Gate matches a call to its journaled target.
78
+ - **Tool policy keys on identity.** A rule's `tool` is the tool's identity, never the model's name. A rule whose `tool` has `__` in it is refused at `PUT /v1/tenant/tool-policy`; a stored one makes the policy unreadable, so every call is denied (and `GET` answers `409`) until the policy names the tool by `server` and `tool`.
79
+ - **`turn.start.mcp` states facts.** The session pins what its servers listed, raw (`McpSnapshot` v2: servers, scrubbed instructions, tools as named); each turn gets `mcp` (`McpFactsSchema`: every tool with `enabled` and the manifest's `deferred` hint) in place of `sessionTools` and `routing.mcpSnapshot`, and `session.mcp` answers `{mcp}`. `mcp.discovered` has no `renamed` or `deferred`. Migration 0031 closes the sessions that pinned the former snapshot (`closedReason: "protocol_15"`).
80
+ - **Our engine names, defers and searches.** `@nylorun/harness` names MCP tools (`mcpToolName`, `mcpToolNames`, within the 64-character provider ceiling), defers them by the manifest's setting or the model's window and pins that layout in its state (`mcpToolSet`, `McpLayout`), and runs `tool_search` (BM25) itself; core's `tool_search`, `deferredToolsTools`, `TOOL_SEARCH_TOOL` and `TOOL_CALL_TOOL` leave `@nylorun/core/define`, and `runDurable` takes `mcp` instead of `sessionTools`.
81
+ - **Our engine shapes tool results.** Core no longer stores large or binary tool results: the record refuses an outcome past `limits.recordEntryBytes` (`limit_exceeded`). Our engine spills them with `artifact.write`, keyed by the call and its bytes (`spillKey`), with a preview, an image as a file for a model that reads images, and one budget per step (`shapeToolOutcome`, `StepBudget`, exported for a harness of your own). The Tool Gate still scrubs credentials and refuses answers past `limits.toolAnswerBytes`.
82
+ - **Harness configuration.** `createHarness({ mcpTools, toolResults })` sets the deferral share, characters per token, fallback window, the note's instruction length, `tool_search`'s limits, the inline cap, preview head and tail, step budget, stub, small size and entry envelope (`DEFAULT_MCP_TOOL_CONFIG`, `DEFAULT_TOOL_RESULT_CONFIG`).
83
+ - **The MCP preview** names tools as Nylorun's engine would (`modelName`, `renamed`) and shows a server's instructions uncut.
84
+ - **Studio** shows an MCP tool as `server / tool` in tool and approval cards, with the model's name, and links the artifacts a tool's result was stored in.
85
+ - **`examples/harness-minimal`** spills a large `bash` output with `artifact.write` and keeps a preview; its README shows how a harness of your own offers MCP tools.
86
+
87
+ - cf425c6: **The harness mounts skills and saves outputs; the in-process harness uses the gates; compaction is a transcript edit (protocol 15).** The fifth step of the harness boundary, still protocol 15 and Harness API 4. See MIGRATION.md.
88
+
89
+ - **Skill folders are our engine's.** Before each sandbox call our engine mounts each skill version of the turn's tree at `/skills/<name>@<hash>/` with `executors.files.mount`, reading the bytes over `definition.file`; the SandboxManager only writes them (`mountFolder`), once per open sandbox (`present` after). `SandboxManager.mountSkills`, its `definitionFile` port and `SandboxSessionRef.manifest` are gone, and the operator sandbox route mounts nothing.
90
+ - **The outputs folder is our engine's (Q5).** At a completed turn's end in a sandbox our engine saves `/workspace/outputs` as the session's `outputs` folder before `turn.completed`, over the new folder mode of `artifact.write` (`kind: "folder"`, `file`, chunks named by hash, `unchanged`, `refused`). Core takes every byte, checks each file's hash before content is stored under it, dedupes, and keeps the content epoch and quotas. Versions say `source: "engine"`; `artifact.export.skipped` and `artifact.export.failed` are harness claims. Core's export (`artifacts/export.ts`, the `WorkspaceReader`, `workspace.read` listing and bytes calls) is removed.
91
+ - **No limit literals.** The new Runtime limit `folderEntries` (10,000; a count, its ceiling from the manifest's one string) replaces `EXPORT_MAX_FILES`, and `createHarness({ outputs: { dir, maxBytes } })` (`/workspace/outputs`, 1 GiB) replaces `EXPORT_MAX_BYTES`. `RUNTIME_LIMIT_CEILINGS` entries are `{value, unit, why}`.
92
+ - **In-process parity.** Every model call goes through the Model Gate: a scripted model is served by `providerModelGate`, metered like any. The MCP pool opens every server through the Tool Gate (`openRemote` is required; the in-process gate's `openMcp` finds the server in the session's pinned manifest and authorizes it with the vault). `ModelRoute` is `{tenantId, modelGate}`; `TenantContext.modelProvider`, `useVaultModel` and `workspaces` are gone.
93
+ - **Compaction is a transcript edit (Q4).** Summary calls say `purpose: "summary"` (no `message.assistant`), and the segment's edit that replaced the history says `kind: "compaction"` with its facts and summary calls (`CompactionFactsSchema`, `transcriptUpdates(..., compaction)`). Core checks the calls and writes one `context.compacted`, which loses `partial`.
94
+
95
+ - 23774c4: **The last hard-coded limits are configuration (harness boundary B15c).** Still protocol 15 and Harness API 4. Every default is the value before. See MIGRATION.md, and DEPLOYMENT.md's Runtime limits and Host tuning.
96
+
97
+ - **21 more Runtime limits** (`GET`/`PUT /v1/tenant/limits`): a message's parts (`messageParts`), page sizes (`pageItems`, `exportPageItems`, `environmentEventItems`; a page asked larger holds that many), labels (`artifactLabels`, `labelKeyChars`, `labelValueChars`), a manifest's setup command, descriptions and secret hosts (`setupCommandChars`, `manifestDescriptionChars`, `secretDescriptionChars`, `secretHosts`), a failed pod's reason (`setupReasonChars`, `setupCommandExcerptChars`), secret values (`secretValueChars`), the tool policy and budgets (`toolRules`, `toolRuleFieldChars`, `toolRuleTextChars`, `modelBudgets`) and flows (`flowConcurrency`, `flowMapItems`, `flowLoopIterations`, replacing the `NYLORUN_FLOW_*` variables no Host read). Request schemas lose these maxima; the Runtime checks the Tenant's.
98
+ - **More Host tuning** (`NYLORUN_TUNING`): token lifetimes and clock tolerance (`keys.*`), the advance deadline and grace (`execution.*`), `nylorun-operate`'s waits, the credential store's lock, sweep arming, Postgres batches and the replication pool, a basin repair's log cadence, egress sockets, the engine poll and sandbox memory floor, MCP listing pages and diagnostics, sandbox helper commands, the scrub threshold, exec event and local stream sizes; and in the engine, `flowValueChars` and `toolResults.minPreviewBytes`.
99
+ - **The CLI's own waits are `NYLORUN_CLI_TUNING`**: `nylorun start`'s waits and polls, the Compose healthchecks and WAL cap, and `nylorun local sandbox`'s waits.
100
+ - **Studio follows the Runtime's limits**: no upload cap of its own, the Tenant's `requestBodyBytes` read for a write it parses past the default (`@nylorun/agents` exports `RUNTIME_LIMIT_DEFAULTS`), no CPU cap in its form.
101
+ - **Kept, each justified where it is defined**: Linux's `MAX_ARG_STRLEN` (a setup command's ceiling) and `PATH_MAX` (a link target), a model-facing tool name's 64 characters, RFC 6838's media type length, Postgres's 65,535 bind parameters, a tmpfs page, and identifier grammars (the protocol's).
102
+
103
+ - 6772612: **The remaining request, upload, token and sandbox limits are Tenant settings (harness boundary B15).** Still protocol 15 and Harness API 4. See MIGRATION.md and DEPLOYMENT.md's Runtime limits.
104
+
105
+ - **27 more Runtime limits** in `GET`/`PUT /v1/tenant/limits`, each with today's value as its default and a ceiling from a dependency (a JavaScript string or timer, a request read as one string, a Harness API frame, a JavaScript number): request bodies and inline files (`requestBodyBytes`, `inlineFileBytes`), `a2aWaitMs`, `errorExcerptChars`, `traceContentBytes`, an Environment's labels, setup and input files (`environmentLabels`, `environmentSetupCommands`, `environmentFiles`, `environmentFilesPerEntry`, `environmentSecretSlots`, `setupCommandMs`, `setupOutputChars`), disk versions (`diskVersionEntries`, `diskVersionBytes`, `diskLeaseMs`, `diskPodWaitMs`; an Environment's manifest may lower the first two with `limits.disk`), model calls (`modelRequestMs`, `modelIdleMs`, `modelAttempts`, `modelRetryDelayMs`, `modelProviderRetries`, `modelRetryDelayMaxMs`, read by the gates for each call) and tools (`toolAttempts`, `httpToolTimeoutMs`, `mcpPreviewMs`, `mcpMetadataBytes`, and the new `mcpSnapshotBytes`: what a session pins of its MCP servers' tools and instructions, past which a server is left out with a diagnostic).
106
+ - **Schema maxima are checked against the Tenant's limits**: an Environment's labels, setup commands, input files, files per entry, secret slots and setup timeout, and an HTTP tool's `timeoutMs` (at deploy and at each call). `limits.environments` and `lifecycle.stopGrace` lose their arbitrary caps; an identity file's issuer takes any number of grants and `jwksFetch` settings.
107
+ - **`turn.start.limits` carries only a harness's limits** (`HarnessLimitsSchema`, `harnessLimitsOf`), and a harness drops one it does not know. `transcriptUpdates` takes `recordEntryBytes` and fills each event up to it; `CHUNK_BYTES` is gone.
108
+ - **Constants a dependency or a standard fixes stay, named for it**: a token is read up to Node's `http.maxHeaderSize`; artifact names and folder paths keep `FILE_NAME_MAX` (255) and `FILE_PATH_MAX` (1,024); a skill file's path is what `FILE_PATH_MAX` leaves under its mount folder; `tracestate` keeps W3C's 512.
109
+ - **Removed**: `ENVIRONMENT_LABELS_MAX`, `ENVIRONMENT_SETUP_MAX`, `ENVIRONMENT_SETUP_TIMEOUT_MAX_MS` (now `ENVIRONMENT_SETUP_TIMEOUT_DEFAULT`), `ENVIRONMENT_FILES_MAX`, `ENVIRONMENT_SECRET_SLOTS_MAX`, `TOKEN_ENVIRONMENT_GRANTS_MAX`, `HTTP_TOOL_MAX_TIMEOUT_MS`, `READ_ARTIFACT_MAX_BYTES` and `CHUNK_BYTES` from `@nylorun/core`; the image checks (`decodeImageBase64`, `validateImageBytes`, `IMAGE_MEDIA_TYPES`, `MAX_IMAGE_BYTES`), the Tenant configuration's `modelCall` and `TrustedIssuersOptions`' `refetchMs`/`maxAgeMs` from `@nylorun/runtime`. Studio's Environment form no longer caps setup commands and input files at 16: the Runtime checks the Tenant's limit.
110
+
111
+ - Pin core to the tested release.
112
+ - Updated dependencies [0a2fbc5]
113
+ - Updated dependencies [ebe7348]
114
+ - Updated dependencies [ff6470e]
115
+ - Updated dependencies [f443475]
116
+ - Updated dependencies [cf425c6]
117
+ - Updated dependencies [23774c4]
118
+ - Updated dependencies [b1e815d]
119
+ - Updated dependencies [2459430]
120
+ - Updated dependencies [f2e9b0a]
121
+ - Updated dependencies [6772612]
122
+ - @nylorun/core@0.23.0-beta
123
+
3
124
  ## 0.17.1-beta
4
125
 
5
126
  ### Patch Changes
package/README.md CHANGED
@@ -1,6 +1,6 @@
1
1
  # @nylorun/admin
2
2
 
3
- The Management API client (protocol 14): the Tenant's status, seed and reset, its
3
+ The Management API client (protocol 15): the Tenant's status, seed and reset, its
4
4
  models, credential coverage, MCP server previews, signing keys, settings and application keys, through
5
5
  `/v1/tenant/*` with a **management key**. It also holds the two helpers over the
6
6
  admin key that Studio needs. Depends only on `@nylorun/core`.
@@ -63,11 +63,11 @@ Management keys are issued on the Tenant's machine only:
63
63
  | `admin.tenant` | `status()`, `seed(request)`, `reset(request)` | `GET /v1/tenant`, `PUT /v1/tenant/config/seed`, `POST /v1/tenant/reset` |
64
64
  | `admin.keys` | `list()`, `put(id)`, `delete(id)` | `/v1/tenant/keys…` |
65
65
  | `admin.models` | `catalog()`, `providers()`, `get()`, `put(request)`, `select(request)`, `setInputs(request)`, `usage(query)`, `budgets.get()`, `budgets.put(request)` | `/v1/tenant/models`, `/providers`, `/model`, `/model/selection`, `/models/inputs`, `/usage`, `/budgets` |
66
- | `admin.coverage` | called directly: `admin.coverage({ agentId, environmentId? })` | `POST /v1/tenant/credential-coverage` |
67
- | `admin.mcp` | `preview({ url, type?, name?, environmentId? })` | `POST /v1/tenant/mcp/preview` |
66
+ | `admin.coverage` | called directly: `admin.coverage({ agentId })`, an Agent's id | `POST /v1/tenant/credential-coverage` |
67
+ | `admin.mcp` | `preview({ url, type?, name?, agentId? })` | `POST /v1/tenant/mcp/preview` |
68
68
  | `admin.toolPolicy` | `get()`, `put({ rules })`: which MCP and HTTP tool calls run, wait for a person (`ask`) or are refused (`deny`) | `/v1/tenant/tool-policy` |
69
69
  | `admin.signingKeys` | `list()`, `rotate({ force? })`, `revoke(kid)` | `/v1/tenant/signing-keys…` |
70
- | `admin.settings` | `sandbox.get()`, `sandbox.put(request)`, `artifacts.get()`, `artifacts.put(request)` | `/v1/tenant/sandbox`, `/v1/tenant/artifacts` |
70
+ | `admin.settings` | `sandbox.get()`, `sandbox.put(request)`, `artifacts.get()`, `artifacts.put(request)`, `skills.get()`, `skills.put(request)`, `limits.get()`, `limits.put(request)` | `/v1/tenant/sandbox`, `/v1/tenant/artifacts`, `/v1/tenant/skills`, `/v1/tenant/limits` |
71
71
 
72
72
  A request body's `requestId` is optional: the client makes one.
73
73
 
@@ -85,27 +85,27 @@ await admin.keys.delete("backend"); // true when it existed
85
85
  ```
86
86
 
87
87
  Credentials for MCP servers, HTTP tools and skills are not the Management
88
- API's: each Environment has one vault, whose secrets the app writes on the
89
- Runtime API (`client.environments.secrets.put` in
90
- [`@nylorun/agents`](../agents/README.md), `PUT /v1/environments/{id}/secrets/{name}`)
88
+ API's: each Agent has one vault, whose secrets the app writes on the
89
+ Runtime API (`client.agents.secrets.put` in
90
+ [`@nylorun/agents`](../agents/README.md), `PUT /v1/agents/{id}/secrets/{name}`)
91
91
  and never reads back. See "MCP servers and HTTP tools" in
92
92
  [DEPLOYMENT.md](../../guides/DEPLOYMENT.md#mcp-servers-and-http-tools), with
93
93
  gateway recipes.
94
94
 
95
- `admin.coverage` says what a session of a saved agent would send for each of
96
- its MCP servers and HTTP tool credentials in the Environment it will name,
97
- before any session starts: `covered` (with the secret's Environment, name and
98
- `via`) or `missing`. Without `environmentId` every entry is `missing`. It reads
99
- no secret and calls no server (Host feature `credential-coverage`).
95
+ `admin.coverage` says what a session on an Agent would send for each MCP server
96
+ and HTTP tool credential of the manifest version the Agent runs, from the
97
+ Agent's vault, before any session starts: `covered` (with the secret's name and
98
+ `via`) or `missing`. It reads no secret and calls no server (Host feature
99
+ `credential-coverage`).
100
100
 
101
101
  ```ts
102
- const coverage = await admin.coverage({ agentId: "triage", environmentId: "projects/acme" });
102
+ const coverage = await admin.coverage({ agentId: "projects/acme" });
103
103
  if (!coverage.complete)
104
104
  for (const entry of coverage.entries) if (entry.status !== "covered") console.log(entry.name, entry.message);
105
105
  ```
106
106
 
107
- `admin.mcp.preview` shows what a server offers with an Environment's credential
108
- for its URL (none without `environmentId`), before an agent names it: the
107
+ `admin.mcp.preview` shows what a server offers with an Agent's credential
108
+ for its URL (none without `agentId`), before a manifest names it: the
109
109
  Runtime connects, lists the tools within 15 s and calls none. Each tool has the
110
110
  name the model would call it (made with `name`, default from the URL's host),
111
111
  its annotations and its input schema's size. A server that answers `401` comes
@@ -113,16 +113,61 @@ back with `authRequired` and its RFC 9728 protected-resource metadata; one that
113
113
  cannot be listed rejects with `mcp_preview_failed` (`details.failure`).
114
114
 
115
115
  ```ts
116
- const preview = await admin.mcp.preview({ url: "https://mcp.linear.app/mcp", name: "linear", environmentId: "projects/acme" });
116
+ const preview = await admin.mcp.preview({ url: "https://mcp.linear.app/mcp", name: "linear", agentId: "projects/acme" });
117
117
  for (const tool of preview.tools) console.log(tool.modelName, tool.schemaBytes);
118
118
  if (preview.authRequired) console.log("needs a sign-in:", preview.authRequired.resourceMetadata);
119
119
  ```
120
120
 
121
- `admin.settings.sandbox` reads and replaces the Tenant's Environment settings
122
- (Tenant setting `environments.config`): `limits` (`network`, `resources`,
123
- `defaultResources`, `idle`, `environments`), the pods' `lifecycle.stopGrace` and
124
- `placement`. `admin.tenant.reset({ scope })` takes `sessions`, `environments`
125
- or `all`.
121
+ `admin.settings.sandbox` reads and replaces the Tenant's settings for its
122
+ Agents' environments (Tenant setting `environments.config`): `limits`
123
+ (`network`, `resources`, `defaultResources`, `idle`, `environments`, the most
124
+ Agents), the pods' `lifecycle.stopGrace` and `placement`.
125
+ `admin.tenant.reset({ scope })` takes `sessions`, `agents` (the Agents, their
126
+ vaults and disks, and their sessions) or `all`.
127
+
128
+ `admin.models.usage({ scope, id?, period? })` totals the Tenant's model calls
129
+ for the Tenant, the Agents made from one agent manifest (`scope: "manifest"`,
130
+ `id` its name) or one turn (`scope: "turn"`), and `admin.models.budgets.put`
131
+ caps them: a `manifest` budget caps the sessions of every Agent made from that
132
+ manifest, over a day or a month.
133
+
134
+ ```ts
135
+ await admin.models.budgets.put({
136
+ budgets: [
137
+ { scope: "manifest", id: "triage", period: "month", limitUsd: 50 },
138
+ { scope: "turn", limitTokens: 200_000 },
139
+ ],
140
+ });
141
+ const spent = await admin.models.usage({ scope: "manifest", id: "triage", period: "month" });
142
+ ```
143
+
144
+ `admin.settings.limits` reads and replaces the Tenant's Runtime limits (Tenant
145
+ setting `limits.config`): the sizes, counts and deadlines the Runtime holds what
146
+ crosses it to. A harness's (`turn.start.limits`): `recordEntryBytes` (one event
147
+ or effect outcome in the record), `modelCallBytes`, `modelFileBytes`,
148
+ `toolAnswerBytes`, `harnessStateBytes` (a custom harness's state), `chunkBytes`
149
+ (one chunked Harness API answer) and `folderEntries` (the files of one folder a
150
+ harness writes, a count). The Runtime's own: request bodies and inline files
151
+ (`requestBodyBytes`, `inlineFileBytes`), `messageParts`, page sizes (`pageItems`,
152
+ `exportPageItems`, `environmentEventItems`), `a2aWaitMs`, `errorExcerptChars`,
153
+ `traceContentBytes`, an Agent's labels, setup and input files
154
+ (`environmentLabels`, `environmentSetupCommands`, `environmentFiles`,
155
+ `environmentFilesPerEntry`, `environmentSecretSlots`, `setupCommandChars`,
156
+ `setupCommandMs`, `setupOutputChars`, `setupReasonChars`, `setupCommandExcerptChars`,
157
+ `manifestDescriptionChars`, `secretDescriptionChars`), labels (`artifactLabels`,
158
+ `labelKeyChars`, `labelValueChars`), secrets (`secretValueChars`, `secretHosts`),
159
+ the tool policy and budgets (`toolRules`, `toolRuleFieldChars`, `toolRuleTextChars`,
160
+ `modelBudgets`), flows (`flowConcurrency`, `flowMapItems`, `flowLoopIterations`), sessions
161
+ (`sessionQueuedMessages`), triggers (`triggersPerAgent`, `triggerMinIntervalMs`,
162
+ `triggerRunsPerHour`, `triggerJitterPercent`, `triggerJitterMaxMs`, `triggerPromptChars`,
163
+ `triggerRunRetentionMs`, `webhookBodyBytes`, `wakeMaxAheadMs`, `wakeNoteChars`), memory (`memoryBytes`, `memoriesPerAgent`, `memoryIndexLines`, `memoryIndexBytes`), disk versions (`diskVersionEntries`, `diskVersionBytes`,
164
+ `diskLeaseMs`, `diskPodWaitMs`), model calls (`modelRequestMs`, `modelIdleMs`,
165
+ `modelAttempts`, `modelRetryDelayMs`, `modelProviderRetries`,
166
+ `modelRetryDelayMaxMs`) and tools (`toolAttempts`, `httpToolTimeoutMs`,
167
+ `mcpSnapshotBytes`, `mcpPreviewMs`, `mcpMetadataBytes`). A limit left out takes
168
+ its default; one above its ceiling, which a dependency such as S2's 1 MiB record
169
+ or a JavaScript timer sets, is refused with `400`. See DEPLOYMENT.md's Runtime
170
+ limits for each one's default and ceiling.
126
171
 
127
172
  ## In a browser
128
173
 
@@ -1,4 +1,4 @@
1
- import { type CredentialCoverage, type CredentialCoverageRequest, type HostModelCatalog, type HostModelView, type ListProvidersResponse, type McpPreview, type McpPreviewRequest, type ModelCallExportPage, type ModelBudgets, type ModelInputsView, type ModelUsageQuery, type ModelUsageTotals, type OperatorKey, type PutHostModelRequest, type PutModelBudgetsRequest, type PutModelInputsRequest, type PutToolPolicyRequest, type PutOperatorKeyResponse, type PutTenantArtifactsRequest, type PutTenantEnvironmentsRequest, type ResetTenantRequest, type ResetTenantResponse, type SeedTenantConfigRequest, type SeedTenantConfigResponse, type SelectHostModelRequest, type SigningKeyView, type TenantArtifactsView, type TenantSandboxView, type TenantStatus, type ToolPolicy } from "@nylorun/core/contracts";
1
+ import { type CredentialCoverage, type CredentialCoverageRequest, type HostModelCatalog, type HostModelView, type ListProvidersResponse, type McpPreview, type McpPreviewRequest, type ModelCallExportPage, type ModelBudgets, type ModelInputsView, type ModelUsageQuery, type ModelUsageTotals, type OperatorKey, type PutHostModelRequest, type PutModelBudgetsRequest, type PutModelInputsRequest, type PutToolPolicyRequest, type PutOperatorKeyResponse, type PutTenantArtifactsRequest, type PutTenantEnvironmentsRequest, type PutTenantLimitsRequest, type PutTenantSkillsRequest, type ResetTenantRequest, type ResetTenantResponse, type SeedTenantConfigRequest, type SeedTenantConfigResponse, type SelectHostModelRequest, type SigningKeyView, type TenantArtifactsView, type TenantSandboxView, type TenantLimitsView, type TenantSkillsView, type TenantStatus, type ToolPolicy } from "@nylorun/core/contracts";
2
2
  export interface ManagementClientOptions {
3
3
  /** The Tenant's URL, or a proxy in front of it. */
4
4
  url: string;
@@ -18,7 +18,7 @@ export interface ManagementTenant {
18
18
  status(): Promise<TenantStatus>;
19
19
  /** Seeds the Tenant's configuration where it is unset (`nylorun start` does this). */
20
20
  seed(request: Body<SeedTenantConfigRequest>): Promise<SeedTenantConfigResponse>;
21
- /** Resets the Tenant's sessions, Environments or both. */
21
+ /** Resets the Tenant's sessions (`sessions`), its Agents and their sessions (`agents`), or `all`. */
22
22
  reset(request: Body<ResetTenantRequest>): Promise<ResetTenantResponse>;
23
23
  }
24
24
  /** The Tenant's keys: application keys are managed here; management keys only on its machine. */
@@ -47,7 +47,10 @@ export interface ManagementModels {
47
47
  * `settings.inputs` with `put` instead.
48
48
  */
49
49
  setInputs(request: Body<PutModelInputsRequest>): Promise<ModelInputsView>;
50
- /** What the Tenant's model calls used, for one scope and period. */
50
+ /**
51
+ * What the Tenant's model calls used, for one scope and period: the Tenant, the Agents made
52
+ * from one agent manifest (`scope: "manifest"`, `id` its name), or one turn.
53
+ */
51
54
  usage(query: ModelUsageQuery): Promise<ModelUsageTotals>;
52
55
  /**
53
56
  * Every recorded model call, unfiltered, in safe transaction order (Host feature
@@ -60,14 +63,17 @@ export interface ManagementModels {
60
63
  }): AsyncIterable<ModelCallExportPage>;
61
64
  readonly budgets: {
62
65
  get(): Promise<ModelBudgets>;
63
- /** Replaces every budget; an empty list removes every cap. */
66
+ /**
67
+ * Replaces every budget; an empty list removes every cap. A `manifest` budget caps the
68
+ * sessions of every Agent made from the agent manifest `id` names.
69
+ */
64
70
  put(request: Body<PutModelBudgetsRequest>): Promise<ModelBudgets>;
65
71
  };
66
72
  }
67
73
  export interface ManagementMcp {
68
74
  /**
69
75
  * A remote MCP server's tools before an agent names it (R2b C12): the Runtime connects with
70
- * the credential for `url` in the vault of `environmentId` (none without one), lists the
76
+ * the credential for `url` in the vault of Agent `agentId` (none without one), lists the
71
77
  * tools and closes; it never calls
72
78
  * one. Each tool has the name the model would call it, made with `name` (default: from the
73
79
  * URL's host). A server that needs a person's sign-in answers `authRequired`, with its
@@ -91,13 +97,24 @@ export interface ManagementSigningKeys {
91
97
  export interface ManagementSettings {
92
98
  readonly sandbox: {
93
99
  get(): Promise<TenantSandboxView>;
94
- /** The Tenant's Environment settings: limits, the pods' stop grace and placement. */
100
+ /** The Tenant's settings for Agents' environments: limits, the pods' stop grace and placement. */
95
101
  put(request: Body<PutTenantEnvironmentsRequest>): Promise<TenantSandboxView>;
96
102
  };
97
103
  readonly artifacts: {
98
104
  get(): Promise<TenantArtifactsView>;
99
105
  put(request: Body<PutTenantArtifactsRequest>): Promise<TenantArtifactsView>;
100
106
  };
107
+ readonly skills: {
108
+ get(): Promise<TenantSkillsView>;
109
+ /** The most bytes one skill's files may hold together; a manifest's runtime section may set less. */
110
+ put(request: Body<PutTenantSkillsRequest>): Promise<TenantSkillsView>;
111
+ };
112
+ readonly limits: {
113
+ /** The Runtime limits in force: sizes, counts and deadlines, each the Tenant's or its default. */
114
+ get(): Promise<TenantLimitsView>;
115
+ /** Replaces them; a limit left out takes its default, one above its ceiling is refused (`400`). */
116
+ put(request: Body<PutTenantLimitsRequest>): Promise<TenantLimitsView>;
117
+ };
101
118
  }
102
119
  /** One client of the Management API. */
103
120
  export declare class ManagementClient {
@@ -107,9 +124,9 @@ export declare class ManagementClient {
107
124
  readonly keys: ManagementKeys;
108
125
  readonly models: ManagementModels;
109
126
  /**
110
- * Which secret of Environment `environmentId` each remote MCP server and HTTP tool of the
111
- * saved agent `agentId` would get in a session that names it (`covered`), or none
112
- * (`missing`). Host feature `credential-coverage`.
127
+ * Which secret of Agent `agentId`'s vault each remote MCP server and HTTP tool of the manifest
128
+ * version it runs would get in its sessions (`covered`), or none (`missing`). Host feature
129
+ * `credential-coverage`.
113
130
  */
114
131
  readonly coverage: (request: Body<CredentialCoverageRequest>) => Promise<CredentialCoverage>;
115
132
  readonly mcp: ManagementMcp;
@@ -1,8 +1,8 @@
1
1
  /**
2
2
  * The Management API client (`/v1/tenant/*`, protocol 8): the Tenant's settings, models,
3
3
  * credential coverage, MCP server previews, signing keys and application keys, with a
4
- * management key. An Environment's secrets are written on the Runtime API
5
- * (`@nylorun/agents`, `client.environments.secrets`). It imports nothing from
4
+ * management key. An Agent's secrets are written on the Runtime API
5
+ * (`@nylorun/agents`, `client.agents.secrets`). It imports nothing from
6
6
  * Node, so a browser app that reaches the Runtime through its own proxy (Studio) uses it too:
7
7
  * `@nylorun/admin/client`. `createAdmin()` in the package's main entry finds the URL and key.
8
8
  */
@@ -21,9 +21,9 @@ export class ManagementClient {
21
21
  keys;
22
22
  models;
23
23
  /**
24
- * Which secret of Environment `environmentId` each remote MCP server and HTTP tool of the
25
- * saved agent `agentId` would get in a session that names it (`covered`), or none
26
- * (`missing`). Host feature `credential-coverage`.
24
+ * Which secret of Agent `agentId`'s vault each remote MCP server and HTTP tool of the manifest
25
+ * version it runs would get in its sessions (`covered`), or none (`missing`). Host feature
26
+ * `credential-coverage`.
27
27
  */
28
28
  coverage;
29
29
  mcp;
@@ -102,6 +102,14 @@ export class ManagementClient {
102
102
  get: () => call("GET", "/v1/tenant/artifacts"),
103
103
  put: (request) => call("PUT", "/v1/tenant/artifacts", withId(request)),
104
104
  },
105
+ skills: {
106
+ get: () => call("GET", "/v1/tenant/skills"),
107
+ put: (request) => call("PUT", "/v1/tenant/skills", withId(request)),
108
+ },
109
+ limits: {
110
+ get: () => call("GET", "/v1/tenant/limits"),
111
+ put: (request) => call("PUT", "/v1/tenant/limits", withId(request)),
112
+ },
105
113
  };
106
114
  }
107
115
  async *pageCalls(options) {
package/package.json CHANGED
@@ -1,6 +1,6 @@
1
1
  {
2
2
  "name": "@nylorun/admin",
3
- "version": "0.17.1-beta",
3
+ "version": "0.19.0-beta",
4
4
  "description": "Nylorun Management API client: the Tenant's models, vaults, signing keys, settings and application keys",
5
5
  "type": "module",
6
6
  "license": "Apache-2.0",
@@ -28,15 +28,15 @@
28
28
  "clean": "node -e \"import('node:fs').then(({rmSync})=>rmSync('dist',{recursive:true,force:true}))\""
29
29
  },
30
30
  "dependencies": {
31
- "@nylorun/core": "0.22.0-beta"
31
+ "@nylorun/core": "0.24.0-beta"
32
32
  },
33
33
  "peerDependencies": {
34
- "zod": "^4.6.5"
34
+ "zod": "^4.6.7"
35
35
  },
36
36
  "devDependencies": {
37
- "@types/node": "^26.6.4",
37
+ "@types/node": "^26.6.5",
38
38
  "typescript": "npm:@typescript/typescript6@^6.0.2",
39
- "vitest": "^5.0.2"
39
+ "vitest": "^5.0.4"
40
40
  },
41
41
  "engines": {
42
42
  "node": ">=24"