@nxtedition/rocksdb 15.2.2 → 15.2.4

package/deps/re2/re2/parse.cc

@@ -1,2529 +0,0 @@
-// Copyright 2006 The RE2 Authors.  All Rights Reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-// Regular expression parser.
-
-// The parser is a simple precedence-based parser with a
-// manual stack.  The parsing work is done by the methods
-// of the ParseState class.  The Regexp::Parse function is
-// essentially just a lexer that calls the ParseState method
-// for each token.
-
-// The parser recognizes POSIX extended regular expressions
-// excluding backreferences, collating elements, and collating
-// classes.  It also allows the empty string as a regular expression
-// and recognizes the Perl escape sequences \d, \s, \w, \D, \S, and \W.
-// See regexp.h for rationale.
-
-#include <stddef.h>
-#include <stdint.h>
-#include <string.h>
-
-#include <algorithm>
-#include <string>
-#include <vector>
-
-#include "absl/base/macros.h"
-#include "absl/log/absl_log.h"
-#include "absl/strings/ascii.h"
-#include "absl/strings/string_view.h"
-#include "re2/pod_array.h"
-#include "re2/regexp.h"
-#include "re2/unicode_casefold.h"
-#include "re2/unicode_groups.h"
-#include "re2/walker-inl.h"
-#include "util/utf.h"
-
-#if defined(RE2_USE_ICU)
-#include "unicode/uniset.h"
-#include "unicode/unistr.h"
-#include "unicode/utypes.h"
-#endif
-
-namespace re2 {
-
-// Controls the maximum repeat count permitted by the parser.
-static int maximum_repeat_count = 1000;
-
-void Regexp::FUZZING_ONLY_set_maximum_repeat_count(int i) {
-  maximum_repeat_count = i;
-}
-
-// Regular expression parse state.
-// The list of parsed regexps so far is maintained as a vector of
-// Regexp pointers called the stack.  Left parenthesis and vertical
-// bar markers are also placed on the stack, as Regexps with
-// non-standard opcodes.
-// Scanning a left parenthesis causes the parser to push a left parenthesis
-// marker on the stack.
-// Scanning a vertical bar causes the parser to pop the stack until it finds a
-// vertical bar or left parenthesis marker (not popping the marker),
-// concatenate all the popped results, and push them back on
-// the stack (DoConcatenation).
-// Scanning a right parenthesis causes the parser to act as though it
-// has seen a vertical bar, which then leaves the top of the stack in the
-// form LeftParen regexp VerticalBar regexp VerticalBar ... regexp VerticalBar.
-// The parser pops all this off the stack and creates an alternation of the
-// regexps (DoAlternation).
-
-class Regexp::ParseState {
- public:
-  ParseState(ParseFlags flags, absl::string_view whole_regexp,
-             RegexpStatus* status);
-  ~ParseState();
-
-  ParseFlags flags() { return flags_; }
-  int rune_max() { return rune_max_; }
-
-  // Parse methods.  All public methods return a bool saying
-  // whether parsing should continue.  If a method returns
-  // false, it has set fields in *status_, and the parser
-  // should return NULL.
-
-  // Pushes the given regular expression onto the stack.
-  // Could check for too much memory used here.
-  bool PushRegexp(Regexp* re);
-
-  // Pushes the literal rune r onto the stack.
-  bool PushLiteral(Rune r);
-
-  // Pushes a regexp with the given op (and no args) onto the stack.
-  bool PushSimpleOp(RegexpOp op);
-
-  // Pushes a ^ onto the stack.
-  bool PushCaret();
-
-  // Pushes a \b (word == true) or \B (word == false) onto the stack.
-  bool PushWordBoundary(bool word);
-
-  // Pushes a $ onto the stack.
-  bool PushDollar();
-
-  // Pushes a . onto the stack
-  bool PushDot();
-
-  // Pushes a repeat operator regexp onto the stack.
-  // A valid argument for the operator must already be on the stack.
-  // s is the name of the operator, for use in error messages.
-  bool PushRepeatOp(RegexpOp op, absl::string_view s, bool nongreedy);
-
-  // Pushes a repetition regexp onto the stack.
-  // A valid argument for the operator must already be on the stack.
-  bool PushRepetition(int min, int max, absl::string_view s, bool nongreedy);
-
-  // Checks whether a particular regexp op is a marker.
-  bool IsMarker(RegexpOp op);
-
-  // Processes a left parenthesis in the input.
-  // Pushes a marker onto the stack.
-  bool DoLeftParen(absl::string_view name);
-  bool DoLeftParenNoCapture();
-
-  // Processes a vertical bar in the input.
-  bool DoVerticalBar();
-
-  // Processes a right parenthesis in the input.
-  bool DoRightParen();
-
-  // Processes the end of input, returning the final regexp.
-  Regexp* DoFinish();
-
-  // Finishes the regexp if necessary, preparing it for use
-  // in a more complicated expression.
-  // If it is a CharClassBuilder, converts into a CharClass.
-  Regexp* FinishRegexp(Regexp*);
-
-  // These routines don't manipulate the parse stack
-  // directly, but they do need to look at flags_.
-  // ParseCharClass also manipulates the internals of Regexp
-  // while creating *out_re.
-
-  // Parse a character class into *out_re.
-  // Removes parsed text from s.
-  bool ParseCharClass(absl::string_view* s, Regexp** out_re,
-                      RegexpStatus* status);
-
-  // Parse a character class character into *rp.
-  // Removes parsed text from s.
-  bool ParseCCCharacter(absl::string_view* s, Rune* rp,
-                        absl::string_view whole_class,
-                        RegexpStatus* status);
-
-  // Parse a character class range into rr.
-  // Removes parsed text from s.
-  bool ParseCCRange(absl::string_view* s, RuneRange* rr,
-                    absl::string_view whole_class,
-                    RegexpStatus* status);
-
-  // Parse a Perl flag set or non-capturing group from s.
-  bool ParsePerlFlags(absl::string_view* s);
-
-  // Finishes the current concatenation,
-  // collapsing it into a single regexp on the stack.
-  void DoConcatenation();
-
-  // Finishes the current alternation,
-  // collapsing it to a single regexp on the stack.
-  void DoAlternation();
-
-  // Generalized DoAlternation/DoConcatenation.
-  void DoCollapse(RegexpOp op);
-
-  // Maybe concatenate Literals into LiteralString.
-  bool MaybeConcatString(int r, ParseFlags flags);
-
-private:
-  ParseFlags flags_;
-  absl::string_view whole_regexp_;
-  RegexpStatus* status_;
-  Regexp* stacktop_;
-  int ncap_;  // number of capturing parens seen
-  int rune_max_;  // maximum char value for this encoding
-
-  ParseState(const ParseState&) = delete;
-  ParseState& operator=(const ParseState&) = delete;
-};
-
-// Pseudo-operators - only on parse stack.
-const RegexpOp kLeftParen = static_cast<RegexpOp>(kMaxRegexpOp+1);
-const RegexpOp kVerticalBar = static_cast<RegexpOp>(kMaxRegexpOp+2);
-
-Regexp::ParseState::ParseState(ParseFlags flags,
-                               absl::string_view whole_regexp,
-                               RegexpStatus* status)
-  : flags_(flags), whole_regexp_(whole_regexp),
-    status_(status), stacktop_(NULL), ncap_(0) {
-  if (flags_ & Latin1)
-    rune_max_ = 0xFF;
-  else
-    rune_max_ = Runemax;
-}
-
-// Cleans up by freeing all the regexps on the stack.
-Regexp::ParseState::~ParseState() {
-  Regexp* next;
-  for (Regexp* re = stacktop_; re != NULL; re = next) {
-    next = re->down_;
-    re->down_ = NULL;
-    if (re->op() == kLeftParen)
-      delete re->name_;
-    re->Decref();
-  }
-}
-
-// Finishes the regexp if necessary, preparing it for use in
-// a more complex expression.
-// If it is a CharClassBuilder, converts into a CharClass.
-Regexp* Regexp::ParseState::FinishRegexp(Regexp* re) {
-  if (re == NULL)
-    return NULL;
-  re->down_ = NULL;
-
-  if (re->op_ == kRegexpCharClass && re->ccb_ != NULL) {
-    CharClassBuilder* ccb = re->ccb_;
-    re->ccb_ = NULL;
-    re->cc_ = ccb->GetCharClass();
-    delete ccb;
-  }
-
-  return re;
-}
-
-// Pushes the given regular expression onto the stack.
-// Could check for too much memory used here.
-bool Regexp::ParseState::PushRegexp(Regexp* re) {
-  MaybeConcatString(-1, NoParseFlags);
-
-  // Special case: a character class of one character is just
-  // a literal.  This is a common idiom for escaping
-  // single characters (e.g., [.] instead of \.), and some
-  // analysis does better with fewer character classes.
-  // Similarly, [Aa] can be rewritten as a literal A with ASCII case folding.
-  if (re->op_ == kRegexpCharClass && re->ccb_ != NULL) {
-    re->ccb_->RemoveAbove(rune_max_);
-    if (re->ccb_->size() == 1) {
-      Rune r = re->ccb_->begin()->lo;
-      re->Decref();
-      re = new Regexp(kRegexpLiteral, flags_);
-      re->rune_ = r;
-    } else if (re->ccb_->size() == 2) {
-      Rune r = re->ccb_->begin()->lo;
-      if ('A' <= r && r <= 'Z' && re->ccb_->Contains(r + 'a' - 'A')) {
-        re->Decref();
-        re = new Regexp(kRegexpLiteral, flags_ | FoldCase);
-        re->rune_ = r + 'a' - 'A';
-      }
-    }
-  }
-
-  if (!IsMarker(re->op()))
-    re->simple_ = re->ComputeSimple();
-  re->down_ = stacktop_;
-  stacktop_ = re;
-  return true;
-}
-
-// Searches the case folding tables and returns the CaseFold* that contains r.
-// If there isn't one, returns the CaseFold* with smallest f->lo bigger than r.
-// If there isn't one, returns NULL.
-const CaseFold* LookupCaseFold(const CaseFold* f, int n, Rune r) {
-  const CaseFold* ef = f + n;
-
-  // Binary search for entry containing r.
-  while (n > 0) {
-    int m = n/2;
-    if (f[m].lo <= r && r <= f[m].hi)
-      return &f[m];
-    if (r < f[m].lo) {
-      n = m;
-    } else {
-      f += m+1;
-      n -= m+1;
-    }
-  }
-
-  // There is no entry that contains r, but f points
-  // where it would have been.  Unless f points at
-  // the end of the array, it points at the next entry
-  // after r.
-  if (f < ef)
-    return f;
-
-  // No entry contains r; no entry contains runes > r.
-  return NULL;
-}
-
-// Returns the result of applying the fold f to the rune r.
-Rune ApplyFold(const CaseFold* f, Rune r) {
-  switch (f->delta) {
-    default:
-      return r + f->delta;
-
-    case EvenOddSkip:  // even <-> odd but only applies to every other
-      if ((r - f->lo) % 2)
-        return r;
-      [[fallthrough]];
-    case EvenOdd:  // even <-> odd
-      if (r%2 == 0)
-        return r + 1;
-      return r - 1;
-
-    case OddEvenSkip:  // odd <-> even but only applies to every other
-      if ((r - f->lo) % 2)
-        return r;
-      [[fallthrough]];
-    case OddEven:  // odd <-> even
-      if (r%2 == 1)
-        return r + 1;
-      return r - 1;
-  }
-}
-
-// Returns the next Rune in r's folding cycle (see unicode_casefold.h).
-// Examples:
-//   CycleFoldRune('A') = 'a'
-//   CycleFoldRune('a') = 'A'
-//
-//   CycleFoldRune('K') = 'k'
-//   CycleFoldRune('k') = 0x212A (Kelvin)
-//   CycleFoldRune(0x212A) = 'K'
-//
-//   CycleFoldRune('?') = '?'
-Rune CycleFoldRune(Rune r) {
-  const CaseFold* f = LookupCaseFold(unicode_casefold, num_unicode_casefold, r);
-  if (f == NULL || r < f->lo)
-    return r;
-  return ApplyFold(f, r);
-}
-
-// Add lo-hi to the class, along with their fold-equivalent characters.
-static void AddFoldedRangeLatin1(CharClassBuilder* cc, Rune lo, Rune hi) {
-  while (lo <= hi) {
-    cc->AddRange(lo, lo);
-    if ('A' <= lo && lo <= 'Z') {
-      cc->AddRange(lo - 'A' + 'a', lo - 'A' + 'a');
-    }
-    if ('a' <= lo && lo <= 'z') {
-      cc->AddRange(lo - 'a' + 'A', lo - 'a' + 'A');
-    }
-    lo++;
-  }
-}
-
-// Add lo-hi to the class, along with their fold-equivalent characters.
-// If lo-hi is already in the class, assume that the fold-equivalent
-// chars are there too, so there's no work to do.
-static void AddFoldedRange(CharClassBuilder* cc, Rune lo, Rune hi, int depth) {
-  // AddFoldedRange calls itself recursively for each rune in the fold cycle.
-  // Most folding cycles are small: there aren't any bigger than four in the
-  // current Unicode tables.  make_unicode_casefold.py checks that
-  // the cycles are not too long, and we double-check here using depth.
-  if (depth > 10) {
-    ABSL_LOG(DFATAL) << "AddFoldedRange recurses too much.";
-    return;
-  }
-
-  if (!cc->AddRange(lo, hi))  // lo-hi was already there? we're done
-    return;
-
-  while (lo <= hi) {
-    const CaseFold* f = LookupCaseFold(unicode_casefold, num_unicode_casefold, lo);
-    if (f == NULL)  // lo has no fold, nor does anything above lo
-      break;
-    if (lo < f->lo) {  // lo has no fold; next rune with a fold is f->lo
-      lo = f->lo;
-      continue;
-    }
-
-    // Add in the result of folding the range lo - f->hi
-    // and that range's fold, recursively.
-    Rune lo1 = lo;
-    Rune hi1 = std::min<Rune>(hi, f->hi);
-    switch (f->delta) {
-      default:
-        lo1 += f->delta;
-        hi1 += f->delta;
-        break;
-      case EvenOdd:
-        if (lo1%2 == 1)
-          lo1--;
-        if (hi1%2 == 0)
-          hi1++;
-        break;
-      case OddEven:
-        if (lo1%2 == 0)
-          lo1--;
-        if (hi1%2 == 1)
-          hi1++;
-        break;
-    }
-    AddFoldedRange(cc, lo1, hi1, depth+1);
-
-    // Pick up where this fold left off.
-    lo = f->hi + 1;
-  }
-}
-
-// Pushes the literal rune r onto the stack.
-bool Regexp::ParseState::PushLiteral(Rune r) {
-  // Do case folding if needed.
-  if (flags_ & FoldCase) {
-    if (flags_ & Latin1 && (('A' <= r && r <= 'Z') ||
-                            ('a' <= r && r <= 'z'))) {
-      Regexp* re = new Regexp(kRegexpCharClass, flags_ & ~FoldCase);
-      re->ccb_ = new CharClassBuilder;
-      AddFoldedRangeLatin1(re->ccb_, r, r);
-      return PushRegexp(re);
-    }
-    if (!(flags_ & Latin1) && CycleFoldRune(r) != r) {
-      Regexp* re = new Regexp(kRegexpCharClass, flags_ & ~FoldCase);
-      re->ccb_ = new CharClassBuilder;
-      Rune r1 = r;
-      do {
-        if (!(flags_ & NeverNL) || r != '\n') {
-          re->ccb_->AddRange(r, r);
-        }
-        r = CycleFoldRune(r);
-      } while (r != r1);
-      return PushRegexp(re);
-    }
-  }
-
-  // Exclude newline if applicable.
-  if ((flags_ & NeverNL) && r == '\n')
-    return PushRegexp(new Regexp(kRegexpNoMatch, flags_));
-
-  // No fancy stuff worked.  Ordinary literal.
-  if (MaybeConcatString(r, flags_))
-    return true;
-
-  Regexp* re = new Regexp(kRegexpLiteral, flags_);
-  re->rune_ = r;
-  return PushRegexp(re);
-}
-
-// Pushes a ^ onto the stack.
-bool Regexp::ParseState::PushCaret() {
-  if (flags_ & OneLine) {
-    return PushSimpleOp(kRegexpBeginText);
-  }
-  return PushSimpleOp(kRegexpBeginLine);
-}
-
-// Pushes a \b or \B onto the stack.
-bool Regexp::ParseState::PushWordBoundary(bool word) {
-  if (word)
-    return PushSimpleOp(kRegexpWordBoundary);
-  return PushSimpleOp(kRegexpNoWordBoundary);
-}
-
-// Pushes a $ onto the stack.
-bool Regexp::ParseState::PushDollar() {
-  if (flags_ & OneLine) {
-    // Clumsy marker so that MimicsPCRE() can tell whether
-    // this kRegexpEndText was a $ and not a \z.
-    Regexp::ParseFlags oflags = flags_;
-    flags_ = flags_ | WasDollar;
-    bool ret = PushSimpleOp(kRegexpEndText);
-    flags_ = oflags;
-    return ret;
-  }
-  return PushSimpleOp(kRegexpEndLine);
-}
-
-// Pushes a . onto the stack.
-bool Regexp::ParseState::PushDot() {
-  if ((flags_ & DotNL) && !(flags_ & NeverNL))
-    return PushSimpleOp(kRegexpAnyChar);
-  // Rewrite . into [^\n]
-  Regexp* re = new Regexp(kRegexpCharClass, flags_ & ~FoldCase);
-  re->ccb_ = new CharClassBuilder;
-  re->ccb_->AddRange(0, '\n' - 1);
-  re->ccb_->AddRange('\n' + 1, rune_max_);
-  return PushRegexp(re);
-}
-
-// Pushes a regexp with the given op (and no args) onto the stack.
-bool Regexp::ParseState::PushSimpleOp(RegexpOp op) {
-  Regexp* re = new Regexp(op, flags_);
-  return PushRegexp(re);
-}
-
-// Pushes a repeat operator regexp onto the stack.
-// A valid argument for the operator must already be on the stack.
-// The char c is the name of the operator, for use in error messages.
-bool Regexp::ParseState::PushRepeatOp(RegexpOp op, absl::string_view s,
-                                      bool nongreedy) {
-  if (stacktop_ == NULL || IsMarker(stacktop_->op())) {
-    status_->set_code(kRegexpRepeatArgument);
-    status_->set_error_arg(s);
-    return false;
-  }
-  Regexp::ParseFlags fl = flags_;
-  if (nongreedy)
-    fl = fl ^ NonGreedy;
-
-  // Squash **, ++ and ??. Regexp::Star() et al. handle this too, but
-  // they're mostly for use during simplification, not during parsing.
-  if (op == stacktop_->op() && fl == stacktop_->parse_flags())
-    return true;
-
-  // Squash *+, *?, +*, +?, ?* and ?+. They all squash to *, so because
-  // op is a repeat, we just have to check that stacktop_->op() is too,
-  // then adjust stacktop_.
-  if ((stacktop_->op() == kRegexpStar ||
-       stacktop_->op() == kRegexpPlus ||
-       stacktop_->op() == kRegexpQuest) &&
-      fl == stacktop_->parse_flags()) {
-    stacktop_->op_ = kRegexpStar;
-    return true;
-  }
-
-  Regexp* re = new Regexp(op, fl);
-  re->AllocSub(1);
-  re->down_ = stacktop_->down_;
-  re->sub()[0] = FinishRegexp(stacktop_);
-  re->simple_ = re->ComputeSimple();
-  stacktop_ = re;
-  return true;
-}
-
-// RepetitionWalker reports whether the repetition regexp is valid.
-// Valid means that the combination of the top-level repetition
-// and any inner repetitions does not exceed n copies of the
-// innermost thing.
-// This rewalks the regexp tree and is called for every repetition,
-// so we have to worry about inducing quadratic behavior in the parser.
-// We avoid this by only using RepetitionWalker when min or max >= 2.
-// In that case the depth of any >= 2 nesting can only get to 9 without
-// triggering a parse error, so each subtree can only be rewalked 9 times.
-class RepetitionWalker : public Regexp::Walker<int> {
- public:
-  RepetitionWalker() {}
-  virtual int PreVisit(Regexp* re, int parent_arg, bool* stop);
-  virtual int PostVisit(Regexp* re, int parent_arg, int pre_arg,
-                        int* child_args, int nchild_args);
-  virtual int ShortVisit(Regexp* re, int parent_arg);
-
- private:
-  RepetitionWalker(const RepetitionWalker&) = delete;
-  RepetitionWalker& operator=(const RepetitionWalker&) = delete;
-};
-
-int RepetitionWalker::PreVisit(Regexp* re, int parent_arg, bool* stop) {
-  int arg = parent_arg;
-  if (re->op() == kRegexpRepeat) {
-    int m = re->max();
-    if (m < 0) {
-      m = re->min();
-    }
-    if (m > 0) {
-      arg /= m;
-    }
-  }
-  return arg;
-}
-
-int RepetitionWalker::PostVisit(Regexp* re, int parent_arg, int pre_arg,
-                                int* child_args, int nchild_args) {
-  int arg = pre_arg;
-  for (int i = 0; i < nchild_args; i++) {
-    if (child_args[i] < arg) {
-      arg = child_args[i];
-    }
-  }
-  return arg;
-}
-
-int RepetitionWalker::ShortVisit(Regexp* re, int parent_arg) {
-  // Should never be called: we use Walk(), not WalkExponential().
-#ifndef FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION
-  ABSL_LOG(DFATAL) << "RepetitionWalker::ShortVisit called";
-#endif
-  return 0;
-}
-
-// Pushes a repetition regexp onto the stack.
-// A valid argument for the operator must already be on the stack.
-bool Regexp::ParseState::PushRepetition(int min, int max, absl::string_view s,
-                                        bool nongreedy) {
-  if ((max != -1 && max < min) ||
-      min > maximum_repeat_count ||
-      max > maximum_repeat_count) {
-    status_->set_code(kRegexpRepeatSize);
-    status_->set_error_arg(s);
-    return false;
-  }
-  if (stacktop_ == NULL || IsMarker(stacktop_->op())) {
-    status_->set_code(kRegexpRepeatArgument);
-    status_->set_error_arg(s);
-    return false;
-  }
-  Regexp::ParseFlags fl = flags_;
-  if (nongreedy)
-    fl = fl ^ NonGreedy;
-  Regexp* re = new Regexp(kRegexpRepeat, fl);
-  re->min_ = min;
-  re->max_ = max;
-  re->AllocSub(1);
-  re->down_ = stacktop_->down_;
-  re->sub()[0] = FinishRegexp(stacktop_);
-  re->simple_ = re->ComputeSimple();
-  stacktop_ = re;
-  if (min >= 2 || max >= 2) {
-    RepetitionWalker w;
-    if (w.Walk(stacktop_, maximum_repeat_count) == 0) {
-      status_->set_code(kRegexpRepeatSize);
-      status_->set_error_arg(s);
-      return false;
-    }
-  }
-  return true;
-}
-
-// Checks whether a particular regexp op is a marker.
-bool Regexp::ParseState::IsMarker(RegexpOp op) {
-  return op >= kLeftParen;
-}
-
-// Processes a left parenthesis in the input.
-// Pushes a marker onto the stack.
-bool Regexp::ParseState::DoLeftParen(absl::string_view name) {
-  Regexp* re = new Regexp(kLeftParen, flags_);
-  re->cap_ = ++ncap_;
-  if (name.data() != NULL)
-    re->name_ = new std::string(name);
-  return PushRegexp(re);
-}
-
-// Pushes a non-capturing marker onto the stack.
-bool Regexp::ParseState::DoLeftParenNoCapture() {
-  Regexp* re = new Regexp(kLeftParen, flags_);
-  re->cap_ = -1;
-  return PushRegexp(re);
-}
-
-// Processes a vertical bar in the input.
-bool Regexp::ParseState::DoVerticalBar() {
-  MaybeConcatString(-1, NoParseFlags);
-  DoConcatenation();
-
-  // Below the vertical bar is a list to alternate.
-  // Above the vertical bar is a list to concatenate.
-  // We just did the concatenation, so either swap
-  // the result below the vertical bar or push a new
-  // vertical bar on the stack.
-  Regexp* r1;
-  Regexp* r2;
-  if ((r1 = stacktop_) != NULL &&
-      (r2 = r1->down_) != NULL &&
-      r2->op() == kVerticalBar) {
-    Regexp* r3;
-    if ((r3 = r2->down_) != NULL &&
-        (r1->op() == kRegexpAnyChar || r3->op() == kRegexpAnyChar)) {
-      // AnyChar is above or below the vertical bar. Let it subsume
-      // the other when the other is Literal, CharClass or AnyChar.
-      if (r3->op() == kRegexpAnyChar &&
-          (r1->op() == kRegexpLiteral ||
-           r1->op() == kRegexpCharClass ||
-           r1->op() == kRegexpAnyChar)) {
-        // Discard r1.
-        stacktop_ = r2;
-        r1->Decref();
-        return true;
-      }
-      if (r1->op() == kRegexpAnyChar &&
-          (r3->op() == kRegexpLiteral ||
-           r3->op() == kRegexpCharClass ||
-           r3->op() == kRegexpAnyChar)) {
-        // Rearrange the stack and discard r3.
-        r1->down_ = r3->down_;
-        r2->down_ = r1;
-        stacktop_ = r2;
-        r3->Decref();
-        return true;
-      }
-    }
-    // Swap r1 below vertical bar (r2).
-    r1->down_ = r2->down_;
-    r2->down_ = r1;
-    stacktop_ = r2;
-    return true;
-  }
-  return PushSimpleOp(kVerticalBar);
-}
-
-// Processes a right parenthesis in the input.
-bool Regexp::ParseState::DoRightParen() {
-  // Finish the current concatenation and alternation.
-  DoAlternation();
-
-  // The stack should be: LeftParen regexp
-  // Remove the LeftParen, leaving the regexp,
-  // parenthesized.
-  Regexp* r1;
-  Regexp* r2;
-  if ((r1 = stacktop_) == NULL ||
-      (r2 = r1->down_) == NULL ||
-      r2->op() != kLeftParen) {
-    status_->set_code(kRegexpUnexpectedParen);
-    status_->set_error_arg(whole_regexp_);
-    return false;
-  }
-
-  // Pop off r1, r2.  Will Decref or reuse below.
-  stacktop_ = r2->down_;
-
-  // Restore flags from when paren opened.
-  Regexp* re = r2;
-  flags_ = re->parse_flags();
-
-  // Rewrite LeftParen as capture if needed.
-  if (re->cap_ > 0) {
-    re->op_ = kRegexpCapture;
-    // re->cap_ is already set
-    re->AllocSub(1);
-    re->sub()[0] = FinishRegexp(r1);
-    re->simple_ = re->ComputeSimple();
-  } else {
-    re->Decref();
-    re = r1;
-  }
-  return PushRegexp(re);
-}
-
-// Processes the end of input, returning the final regexp.
-Regexp* Regexp::ParseState::DoFinish() {
-  DoAlternation();
-  Regexp* re = stacktop_;
-  if (re != NULL && re->down_ != NULL) {
-    status_->set_code(kRegexpMissingParen);
-    status_->set_error_arg(whole_regexp_);
-    return NULL;
-  }
-  stacktop_ = NULL;
-  return FinishRegexp(re);
-}
-
-// Returns the leading regexp that re starts with.
-// The returned Regexp* points into a piece of re,
-// so it must not be used after the caller calls re->Decref().
-Regexp* Regexp::LeadingRegexp(Regexp* re) {
-  if (re->op() == kRegexpEmptyMatch)
-    return NULL;
-  if (re->op() == kRegexpConcat && re->nsub() >= 2) {
-    Regexp** sub = re->sub();
-    if (sub[0]->op() == kRegexpEmptyMatch)
-      return NULL;
-    return sub[0];
-  }
-  return re;
-}
-
-// Removes LeadingRegexp(re) from re and returns what's left.
-// Consumes the reference to re and may edit it in place.
-// If caller wants to hold on to LeadingRegexp(re),
-// must have already Incref'ed it.
-Regexp* Regexp::RemoveLeadingRegexp(Regexp* re) {
-  if (re->op() == kRegexpEmptyMatch)
-    return re;
-  if (re->op() == kRegexpConcat && re->nsub() >= 2) {
-    Regexp** sub = re->sub();
-    if (sub[0]->op() == kRegexpEmptyMatch)
-      return re;
-    sub[0]->Decref();
-    sub[0] = NULL;
-    if (re->nsub() == 2) {
-      // Collapse concatenation to single regexp.
-      Regexp* nre = sub[1];
-      sub[1] = NULL;
-      re->Decref();
-      return nre;
-    }
-    // 3 or more -> 2 or more.
-    re->nsub_--;
-    memmove(sub, sub + 1, re->nsub_ * sizeof sub[0]);
-    return re;
-  }
-  Regexp::ParseFlags pf = re->parse_flags();
-  re->Decref();
-  return new Regexp(kRegexpEmptyMatch, pf);
-}
-
-// Returns the leading string that re starts with.
-// The returned Rune* points into a piece of re,
-// so it must not be used after the caller calls re->Decref().
-Rune* Regexp::LeadingString(Regexp* re, int* nrune,
-                            Regexp::ParseFlags* flags) {
-  while (re->op() == kRegexpConcat && re->nsub() > 0)
-    re = re->sub()[0];
-
-  *flags = static_cast<Regexp::ParseFlags>(re->parse_flags_ &
-                                           (Regexp::FoldCase | Regexp::Latin1));
-
-  if (re->op() == kRegexpLiteral) {
-    *nrune = 1;
-    return &re->rune_;
-  }
-
-  if (re->op() == kRegexpLiteralString) {
-    *nrune = re->nrunes_;
-    return re->runes_;
-  }
-
-  *nrune = 0;
-  return NULL;
-}
-
-// Removes the first n leading runes from the beginning of re.
-// Edits re in place.
-void Regexp::RemoveLeadingString(Regexp* re, int n) {
-  // Chase down concats to find first string.
-  // For regexps generated by parser, nested concats are
-  // flattened except when doing so would overflow the 16-bit
-  // limit on the size of a concatenation, so we should never
-  // see more than two here.
-  Regexp* stk[4];
-  size_t d = 0;
-  while (re->op() == kRegexpConcat) {
-    if (d < ABSL_ARRAYSIZE(stk))
-      stk[d++] = re;
-    re = re->sub()[0];
-  }
-
-  // Remove leading string from re.
-  if (re->op() == kRegexpLiteral) {
-    re->rune_ = 0;
-    re->op_ = kRegexpEmptyMatch;
-  } else if (re->op() == kRegexpLiteralString) {
-    if (n >= re->nrunes_) {
-      delete[] re->runes_;
-      re->runes_ = NULL;
-      re->nrunes_ = 0;
-      re->op_ = kRegexpEmptyMatch;
-    } else if (n == re->nrunes_ - 1) {
-      Rune rune = re->runes_[re->nrunes_ - 1];
-      delete[] re->runes_;
-      re->runes_ = NULL;
-      re->nrunes_ = 0;
-      re->rune_ = rune;
-      re->op_ = kRegexpLiteral;
-    } else {
-      re->nrunes_ -= n;
-      memmove(re->runes_, re->runes_ + n, re->nrunes_ * sizeof re->runes_[0]);
-    }
-  }
-
-  // If re is now empty, concatenations might simplify too.
-  while (d > 0) {
-    re = stk[--d];
-    Regexp** sub = re->sub();
-    if (sub[0]->op() == kRegexpEmptyMatch) {
-      sub[0]->Decref();
-      sub[0] = NULL;
-      // Delete first element of concat.
-      switch (re->nsub()) {
-        case 0:
-        case 1:
-          // Impossible.
-          ABSL_LOG(DFATAL) << "Concat of " << re->nsub();
-          re->submany_ = NULL;
-          re->op_ = kRegexpEmptyMatch;
-          break;
-
-        case 2: {
-          // Replace re with sub[1].
-          Regexp* old = sub[1];
-          sub[1] = NULL;
-          re->Swap(old);
-          old->Decref();
-          break;
-        }
-
-        default:
-          // Slide down.
-          re->nsub_--;
-          memmove(sub, sub + 1, re->nsub_ * sizeof sub[0]);
-          break;
-      }
-    }
-  }
-}
-
-// In the context of factoring alternations, a Splice is: a factored prefix or
-// merged character class computed by one iteration of one round of factoring;
-// the span of subexpressions of the alternation to be "spliced" (i.e. removed
-// and replaced); and, for a factored prefix, the number of suffixes after any
-// factoring that might have subsequently been performed on them. For a merged
-// character class, there are no suffixes, of course, so the field is ignored.
-struct Splice {
-  Splice(Regexp* prefix, Regexp** sub, int nsub)
-      : prefix(prefix),
-        sub(sub),
-        nsub(nsub),
-        nsuffix(-1) {}
-
-  Regexp* prefix;
-  Regexp** sub;
-  int nsub;
-  int nsuffix;
-};
-
-// Named so because it is used to implement an explicit stack, a Frame is: the
-// span of subexpressions of the alternation to be factored; the current round
-// of factoring; any Splices computed; and, for a factored prefix, an iterator
-// to the next Splice to be factored (i.e. in another Frame) because suffixes.
-struct Frame {
-  Frame(Regexp** sub, int nsub)
-      : sub(sub),
-        nsub(nsub),
-        round(0) {}
-
-  Regexp** sub;
-  int nsub;
-  int round;
-  std::vector<Splice> splices;
-  int spliceidx;
-};
-
-// Bundled into a class for friend access to Regexp without needing to declare
-// (or define) Splice in regexp.h.
-class FactorAlternationImpl {
- public:
-  static void Round1(Regexp** sub, int nsub,
-                     Regexp::ParseFlags flags,
-                     std::vector<Splice>* splices);
-  static void Round2(Regexp** sub, int nsub,
-                     Regexp::ParseFlags flags,
-                     std::vector<Splice>* splices);
-  static void Round3(Regexp** sub, int nsub,
-                     Regexp::ParseFlags flags,
-                     std::vector<Splice>* splices);
-};
-
-// Factors common prefixes from alternation.
-// For example,
-//     ABC|ABD|AEF|BCX|BCY
-// simplifies to
-//     A(B(C|D)|EF)|BC(X|Y)
-// and thence to
-//     A(B[CD]|EF)|BC[XY]
-//
-// Rewrites sub to contain simplified list to alternate and returns
-// the new length of sub.  Adjusts reference counts accordingly
-// (incoming sub[i] decremented, outgoing sub[i] incremented).
-int Regexp::FactorAlternation(Regexp** sub, int nsub, ParseFlags flags) {
-  std::vector<Frame> stk;
-  stk.emplace_back(sub, nsub);
-
-  for (;;) {
-    auto& sub = stk.back().sub;
-    auto& nsub = stk.back().nsub;
-    auto& round = stk.back().round;
-    auto& splices = stk.back().splices;
-    auto& spliceidx = stk.back().spliceidx;
-
-    if (splices.empty()) {
-      // Advance to the next round of factoring. Note that this covers
-      // the initialised state: when splices is empty and round is 0.
-      round++;
-    } else if (spliceidx < static_cast<int>(splices.size())) {
-      // We have at least one more Splice to factor. Recurse logically.
-      stk.emplace_back(splices[spliceidx].sub, splices[spliceidx].nsub);
-      continue;
-    } else {
-      // We have no more Splices to factor. Apply them.
-      auto iter = splices.begin();
-      int out = 0;
-      for (int i = 0; i < nsub; ) {
-        // Copy until we reach where the next Splice begins.
-        while (sub + i < iter->sub)
-          sub[out++] = sub[i++];
-        switch (round) {
-          case 1:
-          case 2: {
-            // Assemble the Splice prefix and the suffixes.
-            Regexp* re[2];
-            re[0] = iter->prefix;
-            re[1] = Regexp::AlternateNoFactor(iter->sub, iter->nsuffix, flags);
-            sub[out++] = Regexp::Concat(re, 2, flags);
-            i += iter->nsub;
-            break;
-          }
-          case 3:
-            // Just use the Splice prefix.
-            sub[out++] = iter->prefix;
-            i += iter->nsub;
-            break;
-          default:
-            ABSL_LOG(DFATAL) << "unknown round: " << round;
-            break;
-        }
-        // If we are done, copy until the end of sub.
-        if (++iter == splices.end()) {
-          while (i < nsub)
-            sub[out++] = sub[i++];
-        }
-      }
-      splices.clear();
-      nsub = out;
-      // Advance to the next round of factoring.
-      round++;
-    }
-
-    switch (round) {
-      case 1:
-        FactorAlternationImpl::Round1(sub, nsub, flags, &splices);
-        break;
-      case 2:
-        FactorAlternationImpl::Round2(sub, nsub, flags, &splices);
-        break;
-      case 3:
-        FactorAlternationImpl::Round3(sub, nsub, flags, &splices);
-        break;
-      case 4:
-        if (stk.size() == 1) {
-          // We are at the top of the stack. Just return.
-          return nsub;
-        } else {
-          // Pop the stack and set the number of suffixes.
-          // (Note that references will be invalidated!)
-          int nsuffix = nsub;
-          stk.pop_back();
-          stk.back().splices[stk.back().spliceidx].nsuffix = nsuffix;
-          ++stk.back().spliceidx;
-          continue;
-        }
-      default:
-        ABSL_LOG(DFATAL) << "unknown round: " << round;
-        break;
-    }
-
-    // Set spliceidx depending on whether we have Splices to factor.
-    if (splices.empty() || round == 3) {
-      spliceidx = static_cast<int>(splices.size());
-    } else {
-      spliceidx = 0;
-    }
-  }
-}
-
-void FactorAlternationImpl::Round1(Regexp** sub, int nsub,
-                                   Regexp::ParseFlags flags,
-                                   std::vector<Splice>* splices) {
-  // Round 1: Factor out common literal prefixes.
-  int start = 0;
-  Rune* rune = NULL;
-  int nrune = 0;
-  Regexp::ParseFlags runeflags = Regexp::NoParseFlags;
-  for (int i = 0; i <= nsub; i++) {
-    // Invariant: sub[start:i] consists of regexps that all
-    // begin with rune[0:nrune].
-    Rune* rune_i = NULL;
-    int nrune_i = 0;
-    Regexp::ParseFlags runeflags_i = Regexp::NoParseFlags;
-    if (i < nsub) {
-      rune_i = Regexp::LeadingString(sub[i], &nrune_i, &runeflags_i);
-      if (runeflags_i == runeflags) {
-        int same = 0;
-        while (same < nrune && same < nrune_i && rune[same] == rune_i[same])
-          same++;
-        if (same > 0) {
-          // Matches at least one rune in current range.  Keep going around.
-          nrune = same;
-          continue;
-        }
-      }
-    }
-
-    // Found end of a run with common leading literal string:
-    // sub[start:i] all begin with rune[0:nrune],
-    // but sub[i] does not even begin with rune[0].
-    if (i == start) {
-      // Nothing to do - first iteration.
-    } else if (i == start+1) {
-      // Just one: don't bother factoring.
-    } else {
-      Regexp* prefix = Regexp::LiteralString(rune, nrune, runeflags);
-      for (int j = start; j < i; j++)
-        Regexp::RemoveLeadingString(sub[j], nrune);
-      splices->emplace_back(prefix, sub + start, i - start);
-    }
-
-    // Prepare for next iteration (if there is one).
-    if (i < nsub) {
-      start = i;
-      rune = rune_i;
-      nrune = nrune_i;
-      runeflags = runeflags_i;
-    }
-  }
-}
-
-void FactorAlternationImpl::Round2(Regexp** sub, int nsub,
-                                   Regexp::ParseFlags flags,
-                                   std::vector<Splice>* splices) {
-  // Round 2: Factor out common simple prefixes,
-  // just the first piece of each concatenation.
-  // This will be good enough a lot of the time.
-  //
-  // Complex subexpressions (e.g. involving quantifiers)
-  // are not safe to factor because that collapses their
-  // distinct paths through the automaton, which affects
-  // correctness in some cases.
-  int start = 0;
-  Regexp* first = NULL;
-  for (int i = 0; i <= nsub; i++) {
-    // Invariant: sub[start:i] consists of regexps that all
-    // begin with first.
-    Regexp* first_i = NULL;
-    if (i < nsub) {
-      first_i = Regexp::LeadingRegexp(sub[i]);
-      if (first != NULL &&
-          // first must be an empty-width op
-          // OR a char class, any char or any byte
-          // OR a fixed repeat of a literal, char class, any char or any byte.
-          (first->op() == kRegexpBeginLine ||
-           first->op() == kRegexpEndLine ||
-           first->op() == kRegexpWordBoundary ||
-           first->op() == kRegexpNoWordBoundary ||
-           first->op() == kRegexpBeginText ||
-           first->op() == kRegexpEndText ||
-           first->op() == kRegexpCharClass ||
-           first->op() == kRegexpAnyChar ||
-           first->op() == kRegexpAnyByte ||
-           (first->op() == kRegexpRepeat &&
-            first->min() == first->max() &&
-            (first->sub()[0]->op() == kRegexpLiteral ||
-             first->sub()[0]->op() == kRegexpCharClass ||
-             first->sub()[0]->op() == kRegexpAnyChar ||
-             first->sub()[0]->op() == kRegexpAnyByte))) &&
-          Regexp::Equal(first, first_i))
-        continue;
-    }
-
-    // Found end of a run with common leading regexp:
-    // sub[start:i] all begin with first,
-    // but sub[i] does not.
-    if (i == start) {
-      // Nothing to do - first iteration.
-    } else if (i == start+1) {
-      // Just one: don't bother factoring.
-    } else {
-      Regexp* prefix = first->Incref();
-      for (int j = start; j < i; j++)
-        sub[j] = Regexp::RemoveLeadingRegexp(sub[j]);
-      splices->emplace_back(prefix, sub + start, i - start);
-    }
-
-    // Prepare for next iteration (if there is one).
-    if (i < nsub) {
-      start = i;
-      first = first_i;
-    }
-  }
-}
-
-void FactorAlternationImpl::Round3(Regexp** sub, int nsub,
-                                   Regexp::ParseFlags flags,
-                                   std::vector<Splice>* splices) {
-  // Round 3: Merge runs of literals and/or character classes.
-  int start = 0;
-  Regexp* first = NULL;
-  for (int i = 0; i <= nsub; i++) {
-    // Invariant: sub[start:i] consists of regexps that all
-    // are either literals (i.e. runes) or character classes.
-    Regexp* first_i = NULL;
-    if (i < nsub) {
-      first_i = sub[i];
-      if (first != NULL &&
-          (first->op() == kRegexpLiteral ||
-           first->op() == kRegexpCharClass) &&
-          (first_i->op() == kRegexpLiteral ||
-           first_i->op() == kRegexpCharClass))
-        continue;
-    }
-
-    // Found end of a run of Literal/CharClass:
-    // sub[start:i] all are either one or the other,
-    // but sub[i] is not.
-    if (i == start) {
-      // Nothing to do - first iteration.
-    } else if (i == start+1) {
-      // Just one: don't bother factoring.
-    } else {
-      CharClassBuilder ccb;
-      for (int j = start; j < i; j++) {
-        Regexp* re = sub[j];
-        if (re->op() == kRegexpCharClass) {
-          CharClass* cc = re->cc();
-          for (CharClass::iterator it = cc->begin(); it != cc->end(); ++it)
-            ccb.AddRangeFlags(it->lo, it->hi, re->parse_flags());
-        } else if (re->op() == kRegexpLiteral) {
-          if (re->parse_flags() & Regexp::FoldCase) {
-            // AddFoldedRange() can terminate prematurely if the character class
-            // already contains the rune. For example, if it contains 'a' and we
-            // want to add folded 'a', it sees 'a' and stops without adding 'A'.
-            // To avoid that, we use an empty character class and then merge it.
-            CharClassBuilder tmp;
-            tmp.AddRangeFlags(re->rune(), re->rune(), re->parse_flags());
-            ccb.AddCharClass(&tmp);
-          } else {
-            ccb.AddRangeFlags(re->rune(), re->rune(), re->parse_flags());
-          }
-        } else {
-          ABSL_LOG(DFATAL) << "RE2: unexpected op: " << re->op() << " "
-                           << re->ToString();
-        }
-        re->Decref();
-      }
-      Regexp* re = Regexp::NewCharClass(ccb.GetCharClass(), flags & ~Regexp::FoldCase);
-      splices->emplace_back(re, sub + start, i - start);
-    }
-
-    // Prepare for next iteration (if there is one).
-    if (i < nsub) {
-      start = i;
-      first = first_i;
-    }
-  }
-}
-
-// Collapse the regexps on top of the stack, down to the
-// first marker, into a new op node (op == kRegexpAlternate
-// or op == kRegexpConcat).
-void Regexp::ParseState::DoCollapse(RegexpOp op) {
-  // Scan backward to marker, counting children of composite.
-  int n = 0;
-  Regexp* next = NULL;
-  Regexp* sub;
-  for (sub = stacktop_; sub != NULL && !IsMarker(sub->op()); sub = next) {
-    next = sub->down_;
-    if (sub->op_ == op)
-      n += sub->nsub_;
-    else
-      n++;
-  }
-
-  // If there's just one child, leave it alone.
-  // (Concat of one thing is that one thing; alternate of one thing is same.)
-  if (stacktop_ != NULL && stacktop_->down_ == next)
-    return;
-
-  // Construct op (alternation or concatenation), flattening op of op.
-  PODArray<Regexp*> subs(n);
-  next = NULL;
-  int i = n;
-  for (sub = stacktop_; sub != NULL && !IsMarker(sub->op()); sub = next) {
-    next = sub->down_;
-    if (sub->op_ == op) {
-      Regexp** sub_subs = sub->sub();
-      for (int k = sub->nsub_ - 1; k >= 0; k--)
-        subs[--i] = sub_subs[k]->Incref();
-      sub->Decref();
-    } else {
-      subs[--i] = FinishRegexp(sub);
-    }
-  }
-
-  Regexp* re = ConcatOrAlternate(op, subs.data(), n, flags_, true);
-  re->simple_ = re->ComputeSimple();
-  re->down_ = next;
-  stacktop_ = re;
-}
-
-// Finishes the current concatenation,
-// collapsing it into a single regexp on the stack.
-void Regexp::ParseState::DoConcatenation() {
-  Regexp* r1 = stacktop_;
-  if (r1 == NULL || IsMarker(r1->op())) {
-    // empty concatenation is special case
-    Regexp* re = new Regexp(kRegexpEmptyMatch, flags_);
-    PushRegexp(re);
-  }
-  DoCollapse(kRegexpConcat);
-}
-
-// Finishes the current alternation,
-// collapsing it to a single regexp on the stack.
-void Regexp::ParseState::DoAlternation() {
-  DoVerticalBar();
-  // Now stack top is kVerticalBar.
-  Regexp* r1 = stacktop_;
-  stacktop_ = r1->down_;
-  r1->Decref();
-  DoCollapse(kRegexpAlternate);
-}
-
-// Incremental conversion of concatenated literals into strings.
-// If top two elements on stack are both literal or string,
-// collapse into single string.
-// Don't walk down the stack -- the parser calls this frequently
-// enough that below the bottom two is known to be collapsed.
-// Only called when another regexp is about to be pushed
-// on the stack, so that the topmost literal is not being considered.
-// (Otherwise ab* would turn into (ab)*.)
-// If r >= 0, consider pushing a literal r on the stack.
-// Return whether that happened.
-bool Regexp::ParseState::MaybeConcatString(int r, ParseFlags flags) {
-  Regexp* re1;
-  Regexp* re2;
-  if ((re1 = stacktop_) == NULL || (re2 = re1->down_) == NULL)
-    return false;
-
-  if (re1->op_ != kRegexpLiteral && re1->op_ != kRegexpLiteralString)
-    return false;
-  if (re2->op_ != kRegexpLiteral && re2->op_ != kRegexpLiteralString)
-    return false;
-  if ((re1->parse_flags_ & FoldCase) != (re2->parse_flags_ & FoldCase))
-    return false;
-
-  if (re2->op_ == kRegexpLiteral) {
-    // convert into string
-    Rune rune = re2->rune_;
-    re2->op_ = kRegexpLiteralString;
-    re2->nrunes_ = 0;
-    re2->runes_ = NULL;
-    re2->AddRuneToString(rune);
-  }
-
-  // push re1 into re2.
-  if (re1->op_ == kRegexpLiteral) {
-    re2->AddRuneToString(re1->rune_);
-  } else {
-    for (int i = 0; i < re1->nrunes_; i++)
-      re2->AddRuneToString(re1->runes_[i]);
-    re1->nrunes_ = 0;
-    delete[] re1->runes_;
-    re1->runes_ = NULL;
-  }
-
-  // reuse re1 if possible
-  if (r >= 0) {
-    re1->op_ = kRegexpLiteral;
-    re1->rune_ = r;
-    re1->parse_flags_ = static_cast<uint16_t>(flags);
-    return true;
-  }
-
-  stacktop_ = re2;
-  re1->Decref();
-  return false;
-}
-
-// Lexing routines.
-
-// Parses a decimal integer, storing it in *np.
-// Sets *s to span the remainder of the string.
-static bool ParseInteger(absl::string_view* s, int* np) {
-  if (s->empty() || !absl::ascii_isdigit((*s)[0] & 0xFF))
-    return false;
-  // Disallow leading zeros.
-  if (s->size() >= 2 && (*s)[0] == '0' && absl::ascii_isdigit((*s)[1] & 0xFF))
-    return false;
-  int n = 0;
-  int c;
-  while (!s->empty() && absl::ascii_isdigit(c = (*s)[0] & 0xFF)) {
-    // Avoid overflow.
-    if (n >= 100000000)
-      return false;
-    n = n*10 + c - '0';
-    s->remove_prefix(1);  // digit
-  }
-  *np = n;
-  return true;
-}
-
-// Parses a repetition suffix like {1,2} or {2} or {2,}.
-// Sets *s to span the remainder of the string on success.
-// Sets *lo and *hi to the given range.
-// In the case of {2,}, the high number is unbounded;
-// sets *hi to -1 to signify this.
-// {,2} is NOT a valid suffix.
-// The Maybe in the name signifies that the regexp parse
-// doesn't fail even if ParseRepetition does, so the string_view
-// s must NOT be edited unless MaybeParseRepetition returns true.
-static bool MaybeParseRepetition(absl::string_view* sp, int* lo, int* hi) {
-  absl::string_view s = *sp;
-  if (s.empty() || s[0] != '{')
-    return false;
-  s.remove_prefix(1);  // '{'
-  if (!ParseInteger(&s, lo))
-    return false;
-  if (s.empty())
-    return false;
-  if (s[0] == ',') {
-    s.remove_prefix(1);  // ','
-    if (s.empty())
-      return false;
-    if (s[0] == '}') {
-      // {2,} means at least 2
-      *hi = -1;
-    } else {
-      // {2,4} means 2, 3, or 4.
-      if (!ParseInteger(&s, hi))
-        return false;
-    }
-  } else {
-    // {2} means exactly two
-    *hi = *lo;
-  }
-  if (s.empty() || s[0] != '}')
-    return false;
-  s.remove_prefix(1);  // '}'
-  *sp = s;
-  return true;
-}
-
-// Removes the next Rune from the string_view and stores it in *r.
-// Returns number of bytes removed from sp.
-// Behaves as though there is a terminating NUL at the end of sp.
-// Argument order is backwards from usual Google style
-// but consistent with chartorune.
-static int StringViewToRune(Rune* r, absl::string_view* sp,
-                            RegexpStatus* status) {
-  // fullrune() takes int, not size_t. However, it just looks
-  // at the leading byte and treats any length >= 4 the same.
-  if (fullrune(sp->data(), static_cast<int>(std::min(size_t{4}, sp->size())))) {
-    int n = chartorune(r, sp->data());
-    // Some copies of chartorune have a bug that accepts
-    // encodings of values in (10FFFF, 1FFFFF] as valid.
-    // Those values break the character class algorithm,
-    // which assumes Runemax is the largest rune.
-    if (*r > Runemax) {
-      n = 1;
-      *r = Runeerror;
-    }
-    if (!(n == 1 && *r == Runeerror)) {  // no decoding error
-      sp->remove_prefix(n);
-      return n;
-    }
-  }
-
-  if (status != NULL) {
-    status->set_code(kRegexpBadUTF8);
-    status->set_error_arg(absl::string_view());
-  }
-  return -1;
-}
-
-// Returns whether name is valid UTF-8.
-// If not, sets status to kRegexpBadUTF8.
-static bool IsValidUTF8(absl::string_view s, RegexpStatus* status) {
-  absl::string_view t = s;
-  Rune r;
-  while (!t.empty()) {
-    if (StringViewToRune(&r, &t, status) < 0)
-      return false;
-  }
-  return true;
-}
-
-// Is c a hex digit?
-static int IsHex(int c) {
-  return ('0' <= c && c <= '9') ||
-         ('A' <= c && c <= 'F') ||
-         ('a' <= c && c <= 'f');
-}
-
-// Convert hex digit to value.
-static int UnHex(int c) {
-  if ('0' <= c && c <= '9')
-    return c - '0';
-  if ('A' <= c && c <= 'F')
-    return c - 'A' + 10;
-  if ('a' <= c && c <= 'f')
-    return c - 'a' + 10;
-  ABSL_LOG(DFATAL) << "Bad hex digit " << c;
-  return 0;
-}
-
-// Parse an escape sequence (e.g., \n, \{).
-// Sets *s to span the remainder of the string.
-// Sets *rp to the named character.
-static bool ParseEscape(absl::string_view* s, Rune* rp,
-                        RegexpStatus* status, int rune_max) {
-  const char* begin = s->data();
-  if (s->empty() || (*s)[0] != '\\') {
-    // Should not happen - caller always checks.
-    status->set_code(kRegexpInternalError);
-    status->set_error_arg(absl::string_view());
-    return false;
-  }
-  if (s->size() == 1) {
-    status->set_code(kRegexpTrailingBackslash);
-    status->set_error_arg(absl::string_view());
-    return false;
-  }
-  Rune c, c1;
-  s->remove_prefix(1);  // backslash
-  if (StringViewToRune(&c, s, status) < 0)
-    return false;
-  int code;
-  switch (c) {
-    default:
-      if (c < Runeself && !absl::ascii_isalnum(c)) {
-        // Escaped non-word characters are always themselves.
-        // PCRE is not quite so rigorous: it accepts things like
-        // \q, but we don't.  We once rejected \_, but too many
-        // programs and people insist on using it, so allow \_.
-        *rp = c;
-        return true;
-      }
-      goto BadEscape;
-
-    // Octal escapes.
-    case '1':
-    case '2':
-    case '3':
-    case '4':
-    case '5':
-    case '6':
-    case '7':
-      // Single non-zero octal digit is a backreference; not supported.
-      if (s->empty() || (*s)[0] < '0' || (*s)[0] > '7')
-        goto BadEscape;
-      [[fallthrough]];
-    case '0':
-      // consume up to three octal digits; already have one.
-      code = c - '0';
-      if (!s->empty() && '0' <= (c = (*s)[0]) && c <= '7') {
-        code = code * 8 + c - '0';
-        s->remove_prefix(1);  // digit
-        if (!s->empty()) {
-          c = (*s)[0];
-          if ('0' <= c && c <= '7') {
-            code = code * 8 + c - '0';
-            s->remove_prefix(1);  // digit
-          }
-        }
-      }
-      if (code > rune_max)
-        goto BadEscape;
-      *rp = code;
-      return true;
-
-    // Hexadecimal escapes
-    case 'x':
-      if (s->empty())
-        goto BadEscape;
-      if (StringViewToRune(&c, s, status) < 0)
-        return false;
-      if (c == '{') {
-        // Any number of digits in braces.
-        // Update n as we consume the string, so that
-        // the whole thing gets shown in the error message.
-        // Perl accepts any text at all; it ignores all text
-        // after the first non-hex digit.  We require only hex digits,
-        // and at least one.
-        if (StringViewToRune(&c, s, status) < 0)
-          return false;
-        int nhex = 0;
-        code = 0;
-        while (IsHex(c)) {
-          nhex++;
-          code = code * 16 + UnHex(c);
-          if (code > rune_max)
-            goto BadEscape;
-          if (s->empty())
-            goto BadEscape;
-          if (StringViewToRune(&c, s, status) < 0)
-            return false;
-        }
-        if (c != '}' || nhex == 0)
-          goto BadEscape;
-        *rp = code;
-        return true;
-      }
-      // Easy case: two hex digits.
-      if (s->empty())
-        goto BadEscape;
-      if (StringViewToRune(&c1, s, status) < 0)
-        return false;
-      if (!IsHex(c) || !IsHex(c1))
-        goto BadEscape;
-      *rp = UnHex(c) * 16 + UnHex(c1);
-      return true;
-
-    // C escapes.
-    case 'n':
-      *rp = '\n';
-      return true;
-    case 'r':
-      *rp = '\r';
-      return true;
-    case 't':
-      *rp = '\t';
-      return true;
-
-    // Less common C escapes.
-    case 'a':
-      *rp = '\a';
-      return true;
-    case 'f':
-      *rp = '\f';
-      return true;
-    case 'v':
-      *rp = '\v';
-      return true;
-
-    // This code is disabled to avoid misparsing
-    // the Perl word-boundary \b as a backspace
-    // when in POSIX regexp mode.  Surprisingly,
-    // in Perl, \b means word-boundary but [\b]
-    // means backspace.  We don't support that:
-    // if you want a backspace embed a literal
-    // backspace character or use \x08.
-    //
-    // case 'b':
-    //   *rp = '\b';
-    //   return true;
-  }
-
-BadEscape:
-  // Unrecognized escape sequence.
-  status->set_code(kRegexpBadEscape);
-  status->set_error_arg(
-      absl::string_view(begin, static_cast<size_t>(s->data() - begin)));
-  return false;
-}
-
-// Add a range to the character class, but exclude newline if asked.
-// Also handle case folding.
-void CharClassBuilder::AddRangeFlags(
-    Rune lo, Rune hi, Regexp::ParseFlags parse_flags) {
-
-  // Take out \n if the flags say so.
-  bool cutnl = !(parse_flags & Regexp::ClassNL) ||
-               (parse_flags & Regexp::NeverNL);
-  if (cutnl && lo <= '\n' && '\n' <= hi) {
-    if (lo < '\n')
-      AddRangeFlags(lo, '\n' - 1, parse_flags);
-    if (hi > '\n')
-      AddRangeFlags('\n' + 1, hi, parse_flags);
-    return;
-  }
-
-  // If folding case, add fold-equivalent characters too.
-  if (parse_flags & Regexp::FoldCase) {
-    if (parse_flags & Regexp::Latin1) {
-      AddFoldedRangeLatin1(this, lo, hi);
-    } else {
-      AddFoldedRange(this, lo, hi, 0);
-    }
-  } else {
-    AddRange(lo, hi);
-  }
-}
-
-// Look for a group with the given name.
-static const UGroup* LookupGroup(absl::string_view name,
-                                 const UGroup* groups, int ngroups) {
-  // Simple name lookup.
-  for (int i = 0; i < ngroups; i++)
-    if (absl::string_view(groups[i].name) == name)
-      return &groups[i];
-  return NULL;
-}
-
-// Look for a POSIX group with the given name (e.g., "[:^alpha:]")
-static const UGroup* LookupPosixGroup(absl::string_view name) {
-  return LookupGroup(name, posix_groups, num_posix_groups);
-}
-
-static const UGroup* LookupPerlGroup(absl::string_view name) {
-  return LookupGroup(name, perl_groups, num_perl_groups);
-}
-
-#if !defined(RE2_USE_ICU)
-// Fake UGroup containing all Runes
-static URange16 any16[] = { { 0, 65535 } };
-static URange32 any32[] = { { 65536, Runemax } };
-static UGroup anygroup = { "Any", +1, any16, 1, any32, 1 };
-
-// Look for a Unicode group with the given name (e.g., "Han")
-static const UGroup* LookupUnicodeGroup(absl::string_view name) {
-  // Special case: "Any" means any.
-  if (name == absl::string_view("Any"))
-    return &anygroup;
-  return LookupGroup(name, unicode_groups, num_unicode_groups);
-}
-#endif
-
-// Add a UGroup or its negation to the character class.
-static void AddUGroup(CharClassBuilder* cc, const UGroup* g, int sign,
-                      Regexp::ParseFlags parse_flags) {
-  if (sign == +1) {
-    for (int i = 0; i < g->nr16; i++) {
-      cc->AddRangeFlags(g->r16[i].lo, g->r16[i].hi, parse_flags);
-    }
-    for (int i = 0; i < g->nr32; i++) {
-      cc->AddRangeFlags(g->r32[i].lo, g->r32[i].hi, parse_flags);
-    }
-  } else {
-    if (parse_flags & Regexp::FoldCase) {
-      // Normally adding a case-folded group means
-      // adding all the extra fold-equivalent runes too.
-      // But if we're adding the negation of the group,
-      // we have to exclude all the runes that are fold-equivalent
-      // to what's already missing.  Too hard, so do in two steps.
-      CharClassBuilder ccb1;
-      AddUGroup(&ccb1, g, +1, parse_flags);
-      // If the flags say to take out \n, put it in, so that negating will take it out.
-      // Normally AddRangeFlags does this, but we're bypassing AddRangeFlags.
-      bool cutnl = !(parse_flags & Regexp::ClassNL) ||
-                   (parse_flags & Regexp::NeverNL);
-      if (cutnl) {
-        ccb1.AddRange('\n', '\n');
-      }
-      ccb1.Negate();
-      cc->AddCharClass(&ccb1);
-      return;
-    }
-    int next = 0;
-    for (int i = 0; i < g->nr16; i++) {
-      if (next < g->r16[i].lo)
-        cc->AddRangeFlags(next, g->r16[i].lo - 1, parse_flags);
-      next = g->r16[i].hi + 1;
-    }
-    for (int i = 0; i < g->nr32; i++) {
-      if (next < g->r32[i].lo)
-        cc->AddRangeFlags(next, g->r32[i].lo - 1, parse_flags);
-      next = g->r32[i].hi + 1;
-    }
-    if (next <= Runemax)
-      cc->AddRangeFlags(next, Runemax, parse_flags);
-  }
-}
-
-// Maybe parse a Perl character class escape sequence.
-// Only recognizes the Perl character classes (\d \s \w \D \S \W),
-// not the Perl empty-string classes (\b \B \A \Z \z).
-// On success, sets *s to span the remainder of the string
-// and returns the corresponding UGroup.
-// The string_view must *NOT* be edited unless the call succeeds.
-const UGroup* MaybeParsePerlCCEscape(absl::string_view* s,
-                                     Regexp::ParseFlags parse_flags) {
-  if (!(parse_flags & Regexp::PerlClasses))
-    return NULL;
-  if (s->size() < 2 || (*s)[0] != '\\')
-    return NULL;
-  // Could use StringViewToRune, but there aren't
-  // any non-ASCII Perl group names.
-  absl::string_view name(s->data(), 2);
-  const UGroup* g = LookupPerlGroup(name);
-  if (g == NULL)
-    return NULL;
-  s->remove_prefix(name.size());
-  return g;
-}
-
-enum ParseStatus {
-  kParseOk,  // Did some parsing.
-  kParseError,  // Found an error.
-  kParseNothing,  // Decided not to parse.
-};
-
-// Maybe parses a Unicode character group like \p{Han} or \P{Han}
-// (the latter is a negated group).
-ParseStatus ParseUnicodeGroup(absl::string_view* s,
-                              Regexp::ParseFlags parse_flags,
-                              CharClassBuilder* cc, RegexpStatus* status) {
-  // Decide whether to parse.
-  if (!(parse_flags & Regexp::UnicodeGroups))
-    return kParseNothing;
-  if (s->size() < 2 || (*s)[0] != '\\')
-    return kParseNothing;
-  Rune c = (*s)[1];
-  if (c != 'p' && c != 'P')
-    return kParseNothing;
-
-  // Committed to parse.  Results:
-  int sign = +1;  // -1 = negated char class
-  if (c == 'P')
-    sign = -sign;
-  absl::string_view seq = *s;  // \p{Han} or \pL
-  absl::string_view name;  // Han or L
-  s->remove_prefix(2);  // '\\', 'p'
-
-  if (!StringViewToRune(&c, s, status))
-    return kParseError;
-  if (c != '{') {
-    // Name is the bit of string we just skipped over for c.
-    const char* p = seq.data() + 2;
-    name = absl::string_view(p, static_cast<size_t>(s->data() - p));
-  } else {
-    // Name is in braces. Look for closing }
-    size_t end = s->find('}', 0);
-    if (end == absl::string_view::npos) {
-      if (!IsValidUTF8(seq, status))
-        return kParseError;
-      status->set_code(kRegexpBadCharRange);
-      status->set_error_arg(seq);
-      return kParseError;
-    }
-    name = absl::string_view(s->data(), end);  // without '}'
-    s->remove_prefix(end + 1);  // with '}'
-    if (!IsValidUTF8(name, status))
-      return kParseError;
-  }
-
-  // Chop seq where s now begins.
-  seq = absl::string_view(seq.data(), static_cast<size_t>(s->data() - seq.data()));
-
-  if (!name.empty() && name[0] == '^') {
-    sign = -sign;
-    name.remove_prefix(1);  // '^'
-  }
-
-#if !defined(RE2_USE_ICU)
-  // Look up the group in the RE2 Unicode data.
-  const UGroup* g = LookupUnicodeGroup(name);
-  if (g == NULL) {
-    status->set_code(kRegexpBadCharRange);
-    status->set_error_arg(seq);
-    return kParseError;
-  }
-
-  AddUGroup(cc, g, sign, parse_flags);
-#else
-  // Look up the group in the ICU Unicode data. Because ICU provides full
-  // Unicode properties support, this could be more than a lookup by name.
-  ::icu::UnicodeString ustr = ::icu::UnicodeString::fromUTF8(
-      std::string("\\p{") + std::string(name) + std::string("}"));
-  UErrorCode uerr = U_ZERO_ERROR;
-  ::icu::UnicodeSet uset(ustr, uerr);
-  if (U_FAILURE(uerr)) {
-    status->set_code(kRegexpBadCharRange);
-    status->set_error_arg(seq);
-    return kParseError;
-  }
-
-  // Convert the UnicodeSet to a URange32 and UGroup that we can add.
-  int nr = uset.getRangeCount();
-  PODArray<URange32> r(nr);
-  for (int i = 0; i < nr; i++) {
-    r[i].lo = uset.getRangeStart(i);
-    r[i].hi = uset.getRangeEnd(i);
-  }
-  UGroup g = {"", +1, 0, 0, r.data(), nr};
-  AddUGroup(cc, &g, sign, parse_flags);
-#endif
-
-  return kParseOk;
-}
-
-// Parses a character class name like [:alnum:].
-// Sets *s to span the remainder of the string.
-// Adds the ranges corresponding to the class to ranges.
-static ParseStatus ParseCCName(absl::string_view* s,
-                               Regexp::ParseFlags parse_flags,
-                               CharClassBuilder* cc, RegexpStatus* status) {
-  // Check begins with [:
-  const char* p = s->data();
-  const char* ep = s->data() + s->size();
-  if (ep - p < 2 || p[0] != '[' || p[1] != ':')
-    return kParseNothing;
-
-  // Look for closing :].
-  const char* q;
-  for (q = p+2; q <= ep-2 && (*q != ':' || *(q+1) != ']'); q++)
-    ;
-
-  // If no closing :], then ignore.
-  if (q > ep-2)
-    return kParseNothing;
-
-  // Got it.  Check that it's valid.
-  q += 2;
-  absl::string_view name(p, static_cast<size_t>(q - p));
-
-  const UGroup* g = LookupPosixGroup(name);
-  if (g == NULL) {
-    status->set_code(kRegexpBadCharRange);
-    status->set_error_arg(name);
-    return kParseError;
-  }
-
-  s->remove_prefix(name.size());
-  AddUGroup(cc, g, g->sign, parse_flags);
-  return kParseOk;
-}
-
-// Parses a character inside a character class.
-// There are fewer special characters here than in the rest of the regexp.
-// Sets *s to span the remainder of the string.
-// Sets *rp to the character.
-bool Regexp::ParseState::ParseCCCharacter(absl::string_view* s, Rune* rp,
-                                          absl::string_view whole_class,
-                                          RegexpStatus* status) {
-  if (s->empty()) {
-    status->set_code(kRegexpMissingBracket);
-    status->set_error_arg(whole_class);
-    return false;
-  }
-
-  // Allow regular escape sequences even though
-  // many need not be escaped in this context.
-  if ((*s)[0] == '\\')
-    return ParseEscape(s, rp, status, rune_max_);
-
-  // Otherwise take the next rune.
-  return StringViewToRune(rp, s, status) >= 0;
-}
-
-// Parses a character class character, or, if the character
-// is followed by a hyphen, parses a character class range.
-// For single characters, rr->lo == rr->hi.
-// Sets *s to span the remainder of the string.
-// Sets *rp to the character.
-bool Regexp::ParseState::ParseCCRange(absl::string_view* s, RuneRange* rr,
-                                      absl::string_view whole_class,
-                                      RegexpStatus* status) {
-  absl::string_view os = *s;
-  if (!ParseCCCharacter(s, &rr->lo, whole_class, status))
-    return false;
-  // [a-] means (a|-), so check for final ].
-  if (s->size() >= 2 && (*s)[0] == '-' && (*s)[1] != ']') {
-    s->remove_prefix(1);  // '-'
-    if (!ParseCCCharacter(s, &rr->hi, whole_class, status))
-      return false;
-    if (rr->hi < rr->lo) {
-      status->set_code(kRegexpBadCharRange);
-      status->set_error_arg(absl::string_view(
-          os.data(), static_cast<size_t>(s->data() - os.data())));
-      return false;
-    }
-  } else {
-    rr->hi = rr->lo;
-  }
-  return true;
-}
-
-// Parses a possibly-negated character class expression like [^abx-z[:digit:]].
-// Sets *s to span the remainder of the string.
-// Sets *out_re to the regexp for the class.
-bool Regexp::ParseState::ParseCharClass(absl::string_view* s, Regexp** out_re,
-                                        RegexpStatus* status) {
-  absl::string_view whole_class = *s;
-  if (s->empty() || (*s)[0] != '[') {
-    // Caller checked this.
-    status->set_code(kRegexpInternalError);
-    status->set_error_arg(absl::string_view());
-    return false;
-  }
-  bool negated = false;
-  Regexp* re = new Regexp(kRegexpCharClass, flags_ & ~FoldCase);
-  re->ccb_ = new CharClassBuilder;
-  s->remove_prefix(1);  // '['
-  if (!s->empty() && (*s)[0] == '^') {
-    s->remove_prefix(1);  // '^'
-    negated = true;
-    if (!(flags_ & ClassNL) || (flags_ & NeverNL)) {
-      // If NL can't match implicitly, then pretend
-      // negated classes include a leading \n.
-      re->ccb_->AddRange('\n', '\n');
-    }
-  }
-  bool first = true;  // ] is okay as first char in class
-  while (!s->empty() && ((*s)[0] != ']' || first)) {
-    // - is only okay unescaped as first or last in class.
-    // Except that Perl allows - anywhere.
-    if ((*s)[0] == '-' && !first && !(flags_&PerlX) &&
-        (s->size() == 1 || (*s)[1] != ']')) {
-      absl::string_view t = *s;
-      t.remove_prefix(1);  // '-'
-      Rune r;
-      int n = StringViewToRune(&r, &t, status);
-      if (n < 0) {
-        re->Decref();
-        return false;
-      }
-      status->set_code(kRegexpBadCharRange);
-      status->set_error_arg(absl::string_view(s->data(), 1+n));
-      re->Decref();
-      return false;
-    }
-    first = false;
-
-    // Look for [:alnum:] etc.
-    if (s->size() > 2 && (*s)[0] == '[' && (*s)[1] == ':') {
-      switch (ParseCCName(s, flags_, re->ccb_, status)) {
-        case kParseOk:
-          continue;
-        case kParseError:
-          re->Decref();
-          return false;
-        case kParseNothing:
-          break;
-      }
-    }
-
-    // Look for Unicode character group like \p{Han}
-    if (s->size() > 2 &&
-        (*s)[0] == '\\' &&
-        ((*s)[1] == 'p' || (*s)[1] == 'P')) {
-      switch (ParseUnicodeGroup(s, flags_, re->ccb_, status)) {
-        case kParseOk:
-          continue;
-        case kParseError:
-          re->Decref();
-          return false;
-        case kParseNothing:
-          break;
-      }
-    }
-
-    // Look for Perl character class symbols (extension).
-    const UGroup* g = MaybeParsePerlCCEscape(s, flags_);
-    if (g != NULL) {
-      AddUGroup(re->ccb_, g, g->sign, flags_);
-      continue;
-    }
-
-    // Otherwise assume single character or simple range.
-    RuneRange rr;
-    if (!ParseCCRange(s, &rr, whole_class, status)) {
-      re->Decref();
-      return false;
-    }
-    // AddRangeFlags is usually called in response to a class like
-    // \p{Foo} or [[:foo:]]; for those, it filters \n out unless
-    // Regexp::ClassNL is set.  In an explicit range or singleton
-    // like we just parsed, we do not filter \n out, so set ClassNL
-    // in the flags.
-    re->ccb_->AddRangeFlags(rr.lo, rr.hi, flags_ | Regexp::ClassNL);
-  }
-  if (s->empty()) {
-    status->set_code(kRegexpMissingBracket);
-    status->set_error_arg(whole_class);
-    re->Decref();
-    return false;
-  }
-  s->remove_prefix(1);  // ']'
-
-  if (negated)
-    re->ccb_->Negate();
-
-  *out_re = re;
-  return true;
-}
-
-// Returns whether name is a valid capture name.
-static bool IsValidCaptureName(absl::string_view name) {
-  if (name.empty())
-    return false;
-
-  // Historically, we effectively used [0-9A-Za-z_]+ to validate; that
-  // followed Python 2 except for not restricting the first character.
-  // As of Python 3, Unicode characters beyond ASCII are also allowed;
-  // accordingly, we permit the Lu, Ll, Lt, Lm, Lo, Nl, Mn, Mc, Nd and
-  // Pc categories, but again without restricting the first character.
-  // Also, Unicode normalization (e.g. NFKC) isn't performed: Python 3
-  // performs it for identifiers, but seemingly not for capture names;
-  // if they start doing that for capture names, we won't follow suit.
-  static const CharClass* const cc = []() {
-    CharClassBuilder ccb;
-    for (absl::string_view group :
-         {"Lu", "Ll", "Lt", "Lm", "Lo", "Nl", "Mn", "Mc", "Nd", "Pc"})
-      AddUGroup(&ccb, LookupGroup(group, unicode_groups, num_unicode_groups),
-                +1, Regexp::NoParseFlags);
-    return ccb.GetCharClass();
-  }();
-
-  absl::string_view t = name;
-  Rune r;
-  while (!t.empty()) {
-    if (StringViewToRune(&r, &t, NULL) < 0)
-      return false;
-    if (cc->Contains(r))
-      continue;
-    return false;
-  }
-  return true;
-}
-
-// Parses a Perl flag setting or non-capturing group or both,
-// like (?i) or (?: or (?i:.  Removes from s, updates parse state.
-// The caller must check that s begins with "(?".
-// Returns true on success.  If the Perl flag is not
-// well-formed or not supported, sets status_ and returns false.
-bool Regexp::ParseState::ParsePerlFlags(absl::string_view* s) {
-  absl::string_view t = *s;
-
-  // Caller is supposed to check this.
-  if (!(flags_ & PerlX) || t.size() < 2 || t[0] != '(' || t[1] != '?') {
-    status_->set_code(kRegexpInternalError);
-    ABSL_LOG(DFATAL) << "Bad call to ParseState::ParsePerlFlags";
-    return false;
-  }
-
-  // Check for look-around assertions. This is NOT because we support them! ;)
-  // As per https://github.com/google/re2/issues/468, we really want to report
-  // kRegexpBadPerlOp (not kRegexpBadNamedCapture) for look-behind assertions.
-  // Additionally, it would be nice to report not "(?<", but "(?<=" or "(?<!".
-  if ((t.size() > 3 && (t[2] == '=' || t[2] == '!')) ||
-      (t.size() > 4 && t[2] == '<' && (t[3] == '=' || t[3] == '!'))) {
-    status_->set_code(kRegexpBadPerlOp);
-    status_->set_error_arg(absl::string_view(t.data(), t[2] == '<' ? 4 : 3));
-    return false;
-  }
-
-  // Check for named captures, first introduced in Python's regexp library.
-  // As usual, there are three slightly different syntaxes:
-  //
-  //   (?P<name>expr)   the original, introduced by Python
-  //   (?<name>expr)    the .NET alteration, adopted by Perl 5.10
-  //   (?'name'expr)    another .NET alteration, adopted by Perl 5.10
-  //
-  // Perl 5.10 gave in and implemented the Python version too,
-  // but they claim that the last two are the preferred forms.
-  // PCRE and languages based on it (specifically, PHP and Ruby)
-  // support all three as well.  EcmaScript 4 uses only the Python form.
-  //
-  // In both the open source world (via Code Search) and the
-  // Google source tree, (?P<name>expr) and (?<name>expr) are the
-  // dominant forms of named captures and both are supported.
-  if ((t.size() > 4 && t[2] == 'P' && t[3] == '<') ||
-      (t.size() > 3 && t[2] == '<')) {
-    // Pull out name.
-    size_t begin = t[2] == 'P' ? 4 : 3;
-    size_t end = t.find('>', begin);
-    if (end == absl::string_view::npos) {
-      if (!IsValidUTF8(t, status_))
-        return false;
-      status_->set_code(kRegexpBadNamedCapture);
-      status_->set_error_arg(t);
-      return false;
-    }
-
-    absl::string_view capture(t.data(), end+1);
-    absl::string_view name(t.data()+begin, end-begin);
-    if (!IsValidUTF8(name, status_))
-      return false;
-    if (!IsValidCaptureName(name)) {
-      status_->set_code(kRegexpBadNamedCapture);
-      status_->set_error_arg(capture);
-      return false;
-    }
-
-    if (!DoLeftParen(name)) {
-      // DoLeftParen's failure set status_.
-      return false;
-    }
-
-    s->remove_prefix(capture.size());
-    return true;
-  }
-
-  t.remove_prefix(2);  // "(?"
-
-  bool negated = false;
-  bool sawflags = false;
-  int nflags = flags_;
-  Rune c;
-  for (bool done = false; !done; ) {
-    if (t.empty())
-      goto BadPerlOp;
-    if (StringViewToRune(&c, &t, status_) < 0)
-      return false;
-    switch (c) {
-      default:
-        goto BadPerlOp;
-
-      // Parse flags.
-      case 'i':
-        sawflags = true;
-        if (negated)
-          nflags &= ~FoldCase;
-        else
-          nflags |= FoldCase;
-        break;
-
-      case 'm':  // opposite of our OneLine
-        sawflags = true;
-        if (negated)
-          nflags |= OneLine;
-        else
-          nflags &= ~OneLine;
-        break;
-
-      case 's':
-        sawflags = true;
-        if (negated)
-          nflags &= ~DotNL;
-        else
-          nflags |= DotNL;
-        break;
-
-      case 'U':
-        sawflags = true;
-        if (negated)
-          nflags &= ~NonGreedy;
-        else
-          nflags |= NonGreedy;
-        break;
-
-      // Negation
-      case '-':
-        if (negated)
-          goto BadPerlOp;
-        negated = true;
-        sawflags = false;
-        break;
-
-      // Open new group.
-      case ':':
-        if (!DoLeftParenNoCapture()) {
-          // DoLeftParenNoCapture's failure set status_.
-          return false;
-        }
-        done = true;
-        break;
-
-      // Finish flags.
-      case ')':
-        done = true;
-        break;
-    }
-  }
-
-  if (negated && !sawflags)
-    goto BadPerlOp;
-
-  flags_ = static_cast<Regexp::ParseFlags>(nflags);
-  *s = t;
-  return true;
-
-BadPerlOp:
-  status_->set_code(kRegexpBadPerlOp);
-  status_->set_error_arg(
-      absl::string_view(s->data(), static_cast<size_t>(t.data() - s->data())));
-  return false;
-}
-
-// Converts latin1 (assumed to be encoded as Latin1 bytes)
-// into UTF8 encoding in string.
-// Can't use EncodingUtils::EncodeLatin1AsUTF8 because it is
-// deprecated and because it rejects code points 0x80-0x9F.
-void ConvertLatin1ToUTF8(absl::string_view latin1, std::string* utf) {
-  char buf[UTFmax];
-
-  utf->clear();
-  for (size_t i = 0; i < latin1.size(); i++) {
-    Rune r = latin1[i] & 0xFF;
-    int n = runetochar(buf, &r);
-    utf->append(buf, n);
-  }
-}
-
-// Parses the regular expression given by s,
-// returning the corresponding Regexp tree.
-// The caller must Decref the return value when done with it.
-// Returns NULL on error.
-Regexp* Regexp::Parse(absl::string_view s, ParseFlags global_flags,
-                      RegexpStatus* status) {
-  // Make status non-NULL (easier on everyone else).
-  RegexpStatus xstatus;
-  if (status == NULL)
-    status = &xstatus;
-
-  ParseState ps(global_flags, s, status);
-  absl::string_view t = s;
-
-  // Convert regexp to UTF-8 (easier on the rest of the parser).
-  if (global_flags & Latin1) {
-    std::string* tmp = new std::string;
-    ConvertLatin1ToUTF8(t, tmp);
-    status->set_tmp(tmp);
-    t = *tmp;
-  }
-
-  if (global_flags & Literal) {
-    // Special parse loop for literal string.
-    while (!t.empty()) {
-      Rune r;
-      if (StringViewToRune(&r, &t, status) < 0)
-        return NULL;
-      if (!ps.PushLiteral(r))
-        return NULL;
-    }
-    return ps.DoFinish();
-  }
-
-  absl::string_view lastunary = absl::string_view();
-  while (!t.empty()) {
-    absl::string_view isunary = absl::string_view();
-    switch (t[0]) {
-      default: {
-        Rune r;
-        if (StringViewToRune(&r, &t, status) < 0)
-          return NULL;
-        if (!ps.PushLiteral(r))
-          return NULL;
-        break;
-      }
-
-      case '(':
-        // "(?" introduces Perl escape.
-        if ((ps.flags() & PerlX) && (t.size() >= 2 && t[1] == '?')) {
-          // Flag changes and non-capturing groups.
-          if (!ps.ParsePerlFlags(&t))
-            return NULL;
-          break;
-        }
-        if (ps.flags() & NeverCapture) {
-          if (!ps.DoLeftParenNoCapture())
-            return NULL;
-        } else {
-          if (!ps.DoLeftParen(absl::string_view()))
-            return NULL;
-        }
-        t.remove_prefix(1);  // '('
-        break;
-
-      case '|':
-        if (!ps.DoVerticalBar())
-          return NULL;
-        t.remove_prefix(1);  // '|'
-        break;
-
-      case ')':
-        if (!ps.DoRightParen())
-          return NULL;
-        t.remove_prefix(1);  // ')'
-        break;
-
-      case '^':  // Beginning of line.
-        if (!ps.PushCaret())
-          return NULL;
-        t.remove_prefix(1);  // '^'
-        break;
-
-      case '$':  // End of line.
-        if (!ps.PushDollar())
-          return NULL;
-        t.remove_prefix(1);  // '$'
-        break;
-
-      case '.':  // Any character (possibly except newline).
-        if (!ps.PushDot())
-          return NULL;
-        t.remove_prefix(1);  // '.'
-        break;
-
-      case '[': {  // Character class.
-        Regexp* re;
-        if (!ps.ParseCharClass(&t, &re, status))
-          return NULL;
-        if (!ps.PushRegexp(re))
-          return NULL;
-        break;
-      }
-
-      case '*': {  // Zero or more.
-        RegexpOp op;
-        op = kRegexpStar;
-        goto Rep;
-      case '+':  // One or more.
-        op = kRegexpPlus;
-        goto Rep;
-      case '?':  // Zero or one.
-        op = kRegexpQuest;
-        goto Rep;
-      Rep:
-        absl::string_view opstr = t;
-        bool nongreedy = false;
-        t.remove_prefix(1);  // '*' or '+' or '?'
-        if (ps.flags() & PerlX) {
-          if (!t.empty() && t[0] == '?') {
-            nongreedy = true;
-            t.remove_prefix(1);  // '?'
-          }
-          if (!lastunary.empty()) {
-            // In Perl it is not allowed to stack repetition operators:
-            //   a** is a syntax error, not a double-star.
-            // (and a++ means something else entirely, which we don't support!)
-            status->set_code(kRegexpRepeatOp);
-            status->set_error_arg(absl::string_view(
-                lastunary.data(),
-                static_cast<size_t>(t.data() - lastunary.data())));
-            return NULL;
-          }
-        }
-        opstr = absl::string_view(opstr.data(),
-                                  static_cast<size_t>(t.data() - opstr.data()));
-        if (!ps.PushRepeatOp(op, opstr, nongreedy))
-          return NULL;
-        isunary = opstr;
-        break;
-      }
-
-      case '{': {  // Counted repetition.
-        int lo, hi;
-        absl::string_view opstr = t;
-        if (!MaybeParseRepetition(&t, &lo, &hi)) {
-          // Treat like a literal.
-          if (!ps.PushLiteral('{'))
-            return NULL;
-          t.remove_prefix(1);  // '{'
-          break;
-        }
-        bool nongreedy = false;
-        if (ps.flags() & PerlX) {
-          if (!t.empty() && t[0] == '?') {
-            nongreedy = true;
-            t.remove_prefix(1);  // '?'
-          }
-          if (!lastunary.empty()) {
-            // Not allowed to stack repetition operators.
-            status->set_code(kRegexpRepeatOp);
-            status->set_error_arg(absl::string_view(
-                lastunary.data(),
-                static_cast<size_t>(t.data() - lastunary.data())));
-            return NULL;
-          }
-        }
-        opstr = absl::string_view(opstr.data(),
-                                  static_cast<size_t>(t.data() - opstr.data()));
-        if (!ps.PushRepetition(lo, hi, opstr, nongreedy))
-          return NULL;
-        isunary = opstr;
-        break;
-      }
-
-      case '\\': {  // Escaped character or Perl sequence.
-        // \b and \B: word boundary or not
-        if ((ps.flags() & Regexp::PerlB) &&
-            t.size() >= 2 && (t[1] == 'b' || t[1] == 'B')) {
-          if (!ps.PushWordBoundary(t[1] == 'b'))
-            return NULL;
-          t.remove_prefix(2);  // '\\', 'b'
-          break;
-        }
-
-        if ((ps.flags() & Regexp::PerlX) && t.size() >= 2) {
-          if (t[1] == 'A') {
-            if (!ps.PushSimpleOp(kRegexpBeginText))
-              return NULL;
-            t.remove_prefix(2);  // '\\', 'A'
-            break;
-          }
-          if (t[1] == 'z') {
-            if (!ps.PushSimpleOp(kRegexpEndText))
-              return NULL;
-            t.remove_prefix(2);  // '\\', 'z'
-            break;
-          }
-          // Do not recognize \Z, because this library can't
-          // implement the exact Perl/PCRE semantics.
-          // (This library treats "(?-m)$" as \z, even though
-          // in Perl and PCRE it is equivalent to \Z.)
-
-          if (t[1] == 'C') {  // \C: any byte [sic]
-            if (!ps.PushSimpleOp(kRegexpAnyByte))
-              return NULL;
-            t.remove_prefix(2);  // '\\', 'C'
-            break;
-          }
-
-          if (t[1] == 'Q') {  // \Q ... \E: the ... is always literals
-            t.remove_prefix(2);  // '\\', 'Q'
-            while (!t.empty()) {
-              if (t.size() >= 2 && t[0] == '\\' && t[1] == 'E') {
-                t.remove_prefix(2);  // '\\', 'E'
-                break;
-              }
-              Rune r;
-              if (StringViewToRune(&r, &t, status) < 0)
-                return NULL;
-              if (!ps.PushLiteral(r))
-                return NULL;
-            }
-            break;
-          }
-        }
-
-        if (t.size() >= 2 && (t[1] == 'p' || t[1] == 'P')) {
-          Regexp* re = new Regexp(kRegexpCharClass, ps.flags() & ~FoldCase);
-          re->ccb_ = new CharClassBuilder;
-          switch (ParseUnicodeGroup(&t, ps.flags(), re->ccb_, status)) {
-            case kParseOk:
-              if (!ps.PushRegexp(re))
-                return NULL;
-              goto Break2;
-            case kParseError:
-              re->Decref();
-              return NULL;
-            case kParseNothing:
-              re->Decref();
-              break;
-          }
-        }
-
-        const UGroup* g = MaybeParsePerlCCEscape(&t, ps.flags());
-        if (g != NULL) {
-          Regexp* re = new Regexp(kRegexpCharClass, ps.flags() & ~FoldCase);
-          re->ccb_ = new CharClassBuilder;
-          AddUGroup(re->ccb_, g, g->sign, ps.flags());
-          if (!ps.PushRegexp(re))
-            return NULL;
-          break;
-        }
-
-        Rune r;
-        if (!ParseEscape(&t, &r, status, ps.rune_max()))
-          return NULL;
-        if (!ps.PushLiteral(r))
-          return NULL;
-        break;
-      }
-    }
-  Break2:
-    lastunary = isunary;
-  }
-  return ps.DoFinish();
-}
-
-}  // namespace re2