@nilsr0711/drydock 0.1.0 → 0.1.1

package/.next/standalone/node_modules/.pnpm/source-map-js@1.2.1/node_modules/source-map-js/lib/base64-vlq.js

@@ -0,0 +1,140 @@
+/* -*- Mode: js; js-indent-level: 2; -*- */
+/*
+ * Copyright 2011 Mozilla Foundation and contributors
+ * Licensed under the New BSD license. See LICENSE or:
+ * http://opensource.org/licenses/BSD-3-Clause
+ *
+ * Based on the Base 64 VLQ implementation in Closure Compiler:
+ * https://code.google.com/p/closure-compiler/source/browse/trunk/src/com/google/debugging/sourcemap/Base64VLQ.java
+ *
+ * Copyright 2011 The Closure Compiler Authors. All rights reserved.
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials provided
+ *    with the distribution.
+ *  * Neither the name of Google Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+var base64 = require('./base64');
+
+// A single base 64 digit can contain 6 bits of data. For the base 64 variable
+// length quantities we use in the source map spec, the first bit is the sign,
+// the next four bits are the actual value, and the 6th bit is the
+// continuation bit. The continuation bit tells us whether there are more
+// digits in this value following this digit.
+//
+//   Continuation
+//   |    Sign
+//   |    |
+//   V    V
+//   101011
+
+var VLQ_BASE_SHIFT = 5;
+
+// binary: 100000
+var VLQ_BASE = 1 << VLQ_BASE_SHIFT;
+
+// binary: 011111
+var VLQ_BASE_MASK = VLQ_BASE - 1;
+
+// binary: 100000
+var VLQ_CONTINUATION_BIT = VLQ_BASE;
+
+/**
+ * Converts from a two-complement value to a value where the sign bit is
+ * placed in the least significant bit.  For example, as decimals:
+ *   1 becomes 2 (10 binary), -1 becomes 3 (11 binary)
+ *   2 becomes 4 (100 binary), -2 becomes 5 (101 binary)
+ */
+function toVLQSigned(aValue) {
+  return aValue < 0
+    ? ((-aValue) << 1) + 1
+    : (aValue << 1) + 0;
+}
+
+/**
+ * Converts to a two-complement value from a value where the sign bit is
+ * placed in the least significant bit.  For example, as decimals:
+ *   2 (10 binary) becomes 1, 3 (11 binary) becomes -1
+ *   4 (100 binary) becomes 2, 5 (101 binary) becomes -2
+ */
+function fromVLQSigned(aValue) {
+  var isNegative = (aValue & 1) === 1;
+  var shifted = aValue >> 1;
+  return isNegative
+    ? -shifted
+    : shifted;
+}
+
+/**
+ * Returns the base 64 VLQ encoded value.
+ */
+exports.encode = function base64VLQ_encode(aValue) {
+  var encoded = "";
+  var digit;
+
+  var vlq = toVLQSigned(aValue);
+
+  do {
+    digit = vlq & VLQ_BASE_MASK;
+    vlq >>>= VLQ_BASE_SHIFT;
+    if (vlq > 0) {
+      // There are still more digits in this value, so we must make sure the
+      // continuation bit is marked.
+      digit |= VLQ_CONTINUATION_BIT;
+    }
+    encoded += base64.encode(digit);
+  } while (vlq > 0);
+
+  return encoded;
+};
+
+/**
+ * Decodes the next base 64 VLQ value from the given string and returns the
+ * value and the rest of the string via the out parameter.
+ */
+exports.decode = function base64VLQ_decode(aStr, aIndex, aOutParam) {
+  var strLen = aStr.length;
+  var result = 0;
+  var shift = 0;
+  var continuation, digit;
+
+  do {
+    if (aIndex >= strLen) {
+      throw new Error("Expected more digits in base 64 VLQ value.");
+    }
+
+    digit = base64.decode(aStr.charCodeAt(aIndex++));
+    if (digit === -1) {
+      throw new Error("Invalid base64 digit: " + aStr.charAt(aIndex - 1));
+    }
+
+    continuation = !!(digit & VLQ_CONTINUATION_BIT);
+    digit &= VLQ_BASE_MASK;
+    result = result + (digit << shift);
+    shift += VLQ_BASE_SHIFT;
+  } while (continuation);
+
+  aOutParam.value = fromVLQSigned(result);
+  aOutParam.rest = aIndex;
+};

package/.next/standalone/node_modules/.pnpm/source-map-js@1.2.1/node_modules/source-map-js/lib/base64.js

@@ -0,0 +1,67 @@
+/* -*- Mode: js; js-indent-level: 2; -*- */
+/*
+ * Copyright 2011 Mozilla Foundation and contributors
+ * Licensed under the New BSD license. See LICENSE or:
+ * http://opensource.org/licenses/BSD-3-Clause
+ */
+
+var intToCharMap = 'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/'.split('');
+
+/**
+ * Encode an integer in the range of 0 to 63 to a single base 64 digit.
+ */
+exports.encode = function (number) {
+  if (0 <= number && number < intToCharMap.length) {
+    return intToCharMap[number];
+  }
+  throw new TypeError("Must be between 0 and 63: " + number);
+};
+
+/**
+ * Decode a single base 64 character code digit to an integer. Returns -1 on
+ * failure.
+ */
+exports.decode = function (charCode) {
+  var bigA = 65;     // 'A'
+  var bigZ = 90;     // 'Z'
+
+  var littleA = 97;  // 'a'
+  var littleZ = 122; // 'z'
+
+  var zero = 48;     // '0'
+  var nine = 57;     // '9'
+
+  var plus = 43;     // '+'
+  var slash = 47;    // '/'
+
+  var littleOffset = 26;
+  var numberOffset = 52;
+
+  // 0 - 25: ABCDEFGHIJKLMNOPQRSTUVWXYZ
+  if (bigA <= charCode && charCode <= bigZ) {
+    return (charCode - bigA);
+  }
+
+  // 26 - 51: abcdefghijklmnopqrstuvwxyz
+  if (littleA <= charCode && charCode <= littleZ) {
+    return (charCode - littleA + littleOffset);
+  }
+
+  // 52 - 61: 0123456789
+  if (zero <= charCode && charCode <= nine) {
+    return (charCode - zero + numberOffset);
+  }
+
+  // 62: +
+  if (charCode == plus) {
+    return 62;
+  }
+
+  // 63: /
+  if (charCode == slash) {
+    return 63;
+  }
+
+  // Invalid base64 digit.
+  return -1;
+};

package/.next/standalone/node_modules/.pnpm/source-map-js@1.2.1/node_modules/source-map-js/lib/binary-search.js

@@ -0,0 +1,111 @@
+/* -*- Mode: js; js-indent-level: 2; -*- */
+/*
+ * Copyright 2011 Mozilla Foundation and contributors
+ * Licensed under the New BSD license. See LICENSE or:
+ * http://opensource.org/licenses/BSD-3-Clause
+ */
+
+exports.GREATEST_LOWER_BOUND = 1;
+exports.LEAST_UPPER_BOUND = 2;
+
+/**
+ * Recursive implementation of binary search.
+ *
+ * @param aLow Indices here and lower do not contain the needle.
+ * @param aHigh Indices here and higher do not contain the needle.
+ * @param aNeedle The element being searched for.
+ * @param aHaystack The non-empty array being searched.
+ * @param aCompare Function which takes two elements and returns -1, 0, or 1.
+ * @param aBias Either 'binarySearch.GREATEST_LOWER_BOUND' or
+ *     'binarySearch.LEAST_UPPER_BOUND'. Specifies whether to return the
+ *     closest element that is smaller than or greater than the one we are
+ *     searching for, respectively, if the exact element cannot be found.
+ */
+function recursiveSearch(aLow, aHigh, aNeedle, aHaystack, aCompare, aBias) {
+  // This function terminates when one of the following is true:
+  //
+  //   1. We find the exact element we are looking for.
+  //
+  //   2. We did not find the exact element, but we can return the index of
+  //      the next-closest element.
+  //
+  //   3. We did not find the exact element, and there is no next-closest
+  //      element than the one we are searching for, so we return -1.
+  var mid = Math.floor((aHigh - aLow) / 2) + aLow;
+  var cmp = aCompare(aNeedle, aHaystack[mid], true);
+  if (cmp === 0) {
+    // Found the element we are looking for.
+    return mid;
+  }
+  else if (cmp > 0) {
+    // Our needle is greater than aHaystack[mid].
+    if (aHigh - mid > 1) {
+      // The element is in the upper half.
+      return recursiveSearch(mid, aHigh, aNeedle, aHaystack, aCompare, aBias);
+    }
+
+    // The exact needle element was not found in this haystack. Determine if
+    // we are in termination case (3) or (2) and return the appropriate thing.
+    if (aBias == exports.LEAST_UPPER_BOUND) {
+      return aHigh < aHaystack.length ? aHigh : -1;
+    } else {
+      return mid;
+    }
+  }
+  else {
+    // Our needle is less than aHaystack[mid].
+    if (mid - aLow > 1) {
+      // The element is in the lower half.
+      return recursiveSearch(aLow, mid, aNeedle, aHaystack, aCompare, aBias);
+    }
+
+    // we are in termination case (3) or (2) and return the appropriate thing.
+    if (aBias == exports.LEAST_UPPER_BOUND) {
+      return mid;
+    } else {
+      return aLow < 0 ? -1 : aLow;
+    }
+  }
+}
+
+/**
+ * This is an implementation of binary search which will always try and return
+ * the index of the closest element if there is no exact hit. This is because
+ * mappings between original and generated line/col pairs are single points,
+ * and there is an implicit region between each of them, so a miss just means
+ * that you aren't on the very start of a region.
+ *
+ * @param aNeedle The element you are looking for.
+ * @param aHaystack The array that is being searched.
+ * @param aCompare A function which takes the needle and an element in the
+ *     array and returns -1, 0, or 1 depending on whether the needle is less
+ *     than, equal to, or greater than the element, respectively.
+ * @param aBias Either 'binarySearch.GREATEST_LOWER_BOUND' or
+ *     'binarySearch.LEAST_UPPER_BOUND'. Specifies whether to return the
+ *     closest element that is smaller than or greater than the one we are
+ *     searching for, respectively, if the exact element cannot be found.
+ *     Defaults to 'binarySearch.GREATEST_LOWER_BOUND'.
+ */
+exports.search = function search(aNeedle, aHaystack, aCompare, aBias) {
+  if (aHaystack.length === 0) {
+    return -1;
+  }
+
+  var index = recursiveSearch(-1, aHaystack.length, aNeedle, aHaystack,
+                              aCompare, aBias || exports.GREATEST_LOWER_BOUND);
+  if (index < 0) {
+    return -1;
+  }
+
+  // We have found either the exact element, or the next-closest element than
+  // the one we are searching for. However, there may be more than one such
+  // element. Make sure we always return the smallest of these.
+  while (index - 1 >= 0) {
+    if (aCompare(aHaystack[index], aHaystack[index - 1], true) !== 0) {
+      break;
+    }
+    --index;
+  }
+
+  return index;
+};

package/.next/standalone/node_modules/.pnpm/source-map-js@1.2.1/node_modules/source-map-js/lib/mapping-list.js

@@ -0,0 +1,79 @@
+/* -*- Mode: js; js-indent-level: 2; -*- */
+/*
+ * Copyright 2014 Mozilla Foundation and contributors
+ * Licensed under the New BSD license. See LICENSE or:
+ * http://opensource.org/licenses/BSD-3-Clause
+ */
+
+var util = require('./util');
+
+/**
+ * Determine whether mappingB is after mappingA with respect to generated
+ * position.
+ */
+function generatedPositionAfter(mappingA, mappingB) {
+  // Optimized for most common case
+  var lineA = mappingA.generatedLine;
+  var lineB = mappingB.generatedLine;
+  var columnA = mappingA.generatedColumn;
+  var columnB = mappingB.generatedColumn;
+  return lineB > lineA || lineB == lineA && columnB >= columnA ||
+         util.compareByGeneratedPositionsInflated(mappingA, mappingB) <= 0;
+}
+
+/**
+ * A data structure to provide a sorted view of accumulated mappings in a
+ * performance conscious manner. It trades a neglibable overhead in general
+ * case for a large speedup in case of mappings being added in order.
+ */
+function MappingList() {
+  this._array = [];
+  this._sorted = true;
+  // Serves as infimum
+  this._last = {generatedLine: -1, generatedColumn: 0};
+}
+
+/**
+ * Iterate through internal items. This method takes the same arguments that
+ * `Array.prototype.forEach` takes.
+ *
+ * NOTE: The order of the mappings is NOT guaranteed.
+ */
+MappingList.prototype.unsortedForEach =
+  function MappingList_forEach(aCallback, aThisArg) {
+    this._array.forEach(aCallback, aThisArg);
+  };
+
+/**
+ * Add the given source mapping.
+ *
+ * @param Object aMapping
+ */
+MappingList.prototype.add = function MappingList_add(aMapping) {
+  if (generatedPositionAfter(this._last, aMapping)) {
+    this._last = aMapping;
+    this._array.push(aMapping);
+  } else {
+    this._sorted = false;
+    this._array.push(aMapping);
+  }
+};
+
+/**
+ * Returns the flat, sorted array of mappings. The mappings are sorted by
+ * generated position.
+ *
+ * WARNING: This method returns internal data without copying, for
+ * performance. The return value must NOT be mutated, and should be treated as
+ * an immutable borrow. If you want to take ownership, you must make your own
+ * copy.
+ */
+MappingList.prototype.toArray = function MappingList_toArray() {
+  if (!this._sorted) {
+    this._array.sort(util.compareByGeneratedPositionsInflated);
+    this._sorted = true;
+  }
+  return this._array;
+};
+
+exports.MappingList = MappingList;

package/.next/standalone/node_modules/.pnpm/source-map-js@1.2.1/node_modules/source-map-js/lib/quick-sort.js

@@ -0,0 +1,132 @@
+/* -*- Mode: js; js-indent-level: 2; -*- */
+/*
+ * Copyright 2011 Mozilla Foundation and contributors
+ * Licensed under the New BSD license. See LICENSE or:
+ * http://opensource.org/licenses/BSD-3-Clause
+ */
+
+// It turns out that some (most?) JavaScript engines don't self-host
+// `Array.prototype.sort`. This makes sense because C++ will likely remain
+// faster than JS when doing raw CPU-intensive sorting. However, when using a
+// custom comparator function, calling back and forth between the VM's C++ and
+// JIT'd JS is rather slow *and* loses JIT type information, resulting in
+// worse generated code for the comparator function than would be optimal. In
+// fact, when sorting with a comparator, these costs outweigh the benefits of
+// sorting in C++. By using our own JS-implemented Quick Sort (below), we get
+// a ~3500ms mean speed-up in `bench/bench.html`.
+
+function SortTemplate(comparator) {
+
+/**
+ * Swap the elements indexed by `x` and `y` in the array `ary`.
+ *
+ * @param {Array} ary
+ *        The array.
+ * @param {Number} x
+ *        The index of the first item.
+ * @param {Number} y
+ *        The index of the second item.
+ */
+function swap(ary, x, y) {
+  var temp = ary[x];
+  ary[x] = ary[y];
+  ary[y] = temp;
+}
+
+/**
+ * Returns a random integer within the range `low .. high` inclusive.
+ *
+ * @param {Number} low
+ *        The lower bound on the range.
+ * @param {Number} high
+ *        The upper bound on the range.
+ */
+function randomIntInRange(low, high) {
+  return Math.round(low + (Math.random() * (high - low)));
+}
+
+/**
+ * The Quick Sort algorithm.
+ *
+ * @param {Array} ary
+ *        An array to sort.
+ * @param {function} comparator
+ *        Function to use to compare two items.
+ * @param {Number} p
+ *        Start index of the array
+ * @param {Number} r
+ *        End index of the array
+ */
+function doQuickSort(ary, comparator, p, r) {
+  // If our lower bound is less than our upper bound, we (1) partition the
+  // array into two pieces and (2) recurse on each half. If it is not, this is
+  // the empty array and our base case.
+
+  if (p < r) {
+    // (1) Partitioning.
+    //
+    // The partitioning chooses a pivot between `p` and `r` and moves all
+    // elements that are less than or equal to the pivot to the before it, and
+    // all the elements that are greater than it after it. The effect is that
+    // once partition is done, the pivot is in the exact place it will be when
+    // the array is put in sorted order, and it will not need to be moved
+    // again. This runs in O(n) time.
+
+    // Always choose a random pivot so that an input array which is reverse
+    // sorted does not cause O(n^2) running time.
+    var pivotIndex = randomIntInRange(p, r);
+    var i = p - 1;
+
+    swap(ary, pivotIndex, r);
+    var pivot = ary[r];
+
+    // Immediately after `j` is incremented in this loop, the following hold
+    // true:
+    //
+    //   * Every element in `ary[p .. i]` is less than or equal to the pivot.
+    //
+    //   * Every element in `ary[i+1 .. j-1]` is greater than the pivot.
+    for (var j = p; j < r; j++) {
+      if (comparator(ary[j], pivot, false) <= 0) {
+        i += 1;
+        swap(ary, i, j);
+      }
+    }
+
+    swap(ary, i + 1, j);
+    var q = i + 1;
+
+    // (2) Recurse on each half.
+
+    doQuickSort(ary, comparator, p, q - 1);
+    doQuickSort(ary, comparator, q + 1, r);
+  }
+}
+
+  return doQuickSort;
+}
+
+function cloneSort(comparator) {
+  let template = SortTemplate.toString();
+  let templateFn = new Function(`return ${template}`)();
+  return templateFn(comparator);
+}
+
+/**
+ * Sort the given array in-place with the given comparator function.
+ *
+ * @param {Array} ary
+ *        An array to sort.
+ * @param {function} comparator
+ *        Function to use to compare two items.
+ */
+
+let sortCache = new WeakMap();
+exports.quickSort = function (ary, comparator, start = 0) {
+  let doQuickSort = sortCache.get(comparator);
+  if (doQuickSort === void 0) {
+    doQuickSort = cloneSort(comparator);
+    sortCache.set(comparator, doQuickSort);
+  }
+  doQuickSort(ary, comparator, start, ary.length - 1);
+};