@neomei/agent-soul-framework 4.5.2 → 4.5.4

package/setup-wizard.sh

@@ -1,420 +0,0 @@
-#!/bin/bash
-#
-# 魂器配置向导 — 全新安装后的一站式配置程序
-# 引导用户完成环境变量、连接器配置和服务启动
-#
-set -e
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-USER_NAME="${SUDO_USER:-$USER}"
-HOME_DIR="$(getent passwd "$USER_NAME" | cut -d: -f6)"
-
-# 颜色
-RED='\033[0;31m'
-GREEN='\033[0;32m'
-YELLOW='\033[1;33m'
-BLUE='\033[0;34m'
-CYAN='\033[0;36m'
-NC='\033[0m'
-
-print_header() {
-    echo ""
-    echo -e "${CYAN}╔══════════════════════════════════════════════════════════════╗${NC}"
-    echo -e "${CYAN}║${NC}           魂器 · 初始配置向导                              ${CYAN}║${NC}"
-    echo -e "${CYAN}╚══════════════════════════════════════════════════════════════╝${NC}"
-    echo ""
-}
-
-print_step() {
-    echo ""
-    echo -e "${BLUE}━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━${NC}"
-    echo -e "${BLUE}  步骤 $1: $2${NC}"
-    echo -e "${BLUE}━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━${NC}"
-    echo ""
-}
-
-print_success() { echo -e "${GREEN}✅${NC} $1"; }
-print_warning() { echo -e "${YELLOW}⚠️${NC}  $1"; }
-print_error() { echo -e "${RED}❌${NC} $1"; }
-print_info() { echo -e "${BLUE}ℹ️${NC}  $1"; }
-
-# 非交互模式检测
-NONINTERACTIVE="${NONINTERACTIVE:-0}"
-
-# 安全读取输入
-safe_read() {
-    local prompt="$1"
-    local var_name="$2"
-    if [ "$NONINTERACTIVE" = "1" ]; then
-        return 1
-    fi
-    if [ -t 0 ] || [ -e /dev/tty ]; then
-        read -rp "$prompt" "$var_name" < /dev/tty
-    else
-        return 1
-    fi
-}
-
-# 询问是否继续
-ask_continue() {
-    local msg="$1"
-    if [ "$NONINTERACTIVE" = "1" ]; then
-        return 0
-    fi
-    local answer
-    safe_read "$msg [Y/n]: " answer
-    [[ ! "$answer" =~ ^[Nn]$ ]]
-}
-
-# ───────────────────────────────────────────────
-# 步骤 1: 环境检查
-# ───────────────────────────────────────────────
-step1_check_env() {
-    print_step "1/5" "环境检查"
-
-    local issues=0
-
-    # 检查 Node.js
-    if command -v node &>/dev/null; then
-        NODE_VERSION=$(node -v | sed 's/v//')
-        print_success "Node.js $NODE_VERSION"
-    else
-        print_error "Node.js 未安装（需要 ≥ 20）"
-        issues=$((issues + 1))
-    fi
-
-    # 检查 opencode
-    if command -v opencode &>/dev/null; then
-        print_success "OpenCode 已安装"
-    else
-        print_warning "OpenCode 未找到，请运行: npm install -g opencode-ai"
-        issues=$((issues + 1))
-    fi
-
-    # 检查 Python
-    if command -v python3 &>/dev/null; then
-        print_success "Python $(python3 --version 2>&1 | cut -d' ' -f2)"
-    else
-        print_warning "Python 未安装（心跳功能将不可用）"
-    fi
-
-    # 检查可选 channel 插件（飞书/企微，按需安装）
-    if command -v opencode-feishu &>/dev/null; then
-        print_success "飞书通道插件 (opencode-feishu)"
-    else
-        print_info "飞书通道插件未安装（可选），安装命令: npm install -g @neomei/opencode-feishu"
-    fi
-
-    if command -v opencode-qiwei &>/dev/null; then
-        print_success "企微通道插件 (opencode-qiwei)"
-    else
-        print_info "企微通道插件未安装（可选），安装命令: npm install -g @neomei/opencode-qiwei"
-    fi
-
-    if command -v python3 &>/dev/null; then
-    print_step "2/5" "环境变量配置"
-
-    ENV_FILE="${HOME_DIR}/.hunqi/.env"
-    mkdir -p "$(dirname "$ENV_FILE")"
-
-    # 非交互模式: 如果已有 .env 就直接用，没有就创建一个空的
-    if [ "$NONINTERACTIVE" = "1" ]; then
-        if [ -f "$ENV_FILE" ] && [ -s "$ENV_FILE" ]; then
-            print_success "使用现有 .env 配置"
-        else
-            echo "# 魂器环境变量配置" > "$ENV_FILE"
-            echo "# 请手动填写 API Key 或使用 setup-wizard.sh 交互式配置" >> "$ENV_FILE"
-            print_warning ".env 已创建（空），请在安装完成后手动配置 API Key"
-        fi
-        # 同步到项目目录
-        if [ -f "$SCRIPT_DIR/.env" ]; then
-            cp "$ENV_FILE" "$SCRIPT_DIR/.env"
-        fi
-        return 0
-    fi
-
-    # 如果已有 .env，询问是否覆盖
-    if [ -f "$ENV_FILE" ] && [ -s "$ENV_FILE" ]; then
-        if ! ask_continue "检测到已有的 .env 配置，是否重新配置"; then
-            print_info "跳过 .env 配置，使用现有配置"
-            return 0
-        fi
-    fi
-
-    print_info "请填写以下 API Key（没有的可直接回车跳过）"
-    echo ""
-
-    local vars=()
-
-    # DashScope API Key
-    echo -e "${CYAN}阿里云百炼 (DashScope)${NC} — 用于文本嵌入和向量检索"
-    echo "  获取地址: https://dashscope.aliyun.com/"
-    local dashscope_key
-    safe_read "  DASHSCOPE_API_KEY: " dashscope_key
-    [ -n "$dashscope_key" ] && vars+=("DASHSCOPE_API_KEY=$dashscope_key")
-    echo ""
-
-    # 写入 .env
-    {
-        echo "# 魂器环境变量配置"
-        echo "# 生成时间: $(date '+%Y-%m-%d %H:%M:%S')"
-        echo ""
-        for v in "${vars[@]}"; do
-            echo "$v"
-        done
-    } > "$ENV_FILE"
-
-    # 同时同步到项目目录
-    if [ -f "$SCRIPT_DIR/.env" ]; then
-        cp "$ENV_FILE" "$SCRIPT_DIR/.env"
-    fi
-
-    print_success ".env 已保存到 $ENV_FILE"
-}
-
-# ───────────────────────────────────────────────
-# 步骤 3: 飞书配置
-# ───────────────────────────────────────────────
-step3_feishu() {
-    print_step "3/5" "飞书通道（可选）"
-
-    if ! command -v opencode-feishu &>/dev/null; then
-        print_info "opencode-feishu 未安装，跳过飞书配置"
-        print_info "如需飞书通道，安装命令: npm install -g @neomei/opencode-feishu"
-        print_info "安装后运行: opencode-feishu setup"
-        return 0
-    fi
-
-    local feishu_config="${HOME_DIR}/.config/opencode/feishu.json"
-
-    # 非交互模式跳过（opencode-feishu setup 需要 tty 扫码）
-    if [ "$NONINTERACTIVE" = "1" ]; then
-        if [ -f "$feishu_config" ]; then
-            print_success "飞书配置已存在"
-        else
-            print_info "非交互模式跳过飞书配置"
-            print_info "请手动运行: opencode-feishu setup"
-        fi
-        return 0
-    fi
-
-    local setup_ran=0
-
-    if [ -f "$feishu_config" ]; then
-        print_success "飞书配置已存在"
-        if ask_continue "是否重新配置飞书"; then
-            echo ""
-            opencode-feishu setup
-            setup_ran=1
-        else
-            print_info "跳过飞书配置"
-        fi
-    else
-        print_info "开始飞书配置向导..."
-        echo "  将显示二维码，请用飞书 App 扫码"
-        echo ""
-        if ask_continue "是否现在配置飞书"; then
-            opencode-feishu setup
-            setup_ran=1
-        else
-            print_info "跳过飞书配置，稍后手动运行: opencode-feishu setup"
-        fi
-    fi
-
-    # 扫码成功后，自动把凭证同步到 .env
-    if [ "$setup_ran" = "1" ] && [ -f "$feishu_config" ]; then
-        local fs_app_id fs_app_secret
-        # 优先用 jq，否则用 sed 回退
-        if command -v jq &>/dev/null; then
-            fs_app_id=$(jq -r '.appId // empty' "$feishu_config" 2>/dev/null)
-            fs_app_secret=$(jq -r '.appSecret // empty' "$feishu_config" 2>/dev/null)
-        else
-            fs_app_id=$(grep -o '"appId" *: *"[^"]*"' "$feishu_config" 2>/dev/null | sed 's/.*: *"\([^"]*\)".*/\1/')
-            fs_app_secret=$(grep -o '"appSecret" *: *"[^"]*"' "$feishu_config" 2>/dev/null | sed 's/.*: *"\([^"]*\)".*/\1/')
-        fi
-
-        if [ -n "$fs_app_id" ] && [ -n "$fs_app_secret" ]; then
-            ENV_FILE="${HOME_DIR}/.hunqi/.env"
-            # 更新或追加 FEISHU_APP_ID / FEISHU_APP_SECRET
-            for key_val in "FEISHU_APP_ID=$fs_app_id" "FEISHU_APP_SECRET=$fs_app_secret"; do
-                key="${key_val%%=*}"
-                if grep -q "^${key}=" "$ENV_FILE" 2>/dev/null; then
-                    sed -i "s|^${key}=.*|${key_val}|" "$ENV_FILE"
-                elif grep -q "^#.*${key}" "$ENV_FILE" 2>/dev/null; then
-                    sed -i "s|^#.*${key}.*|${key_val}|" "$ENV_FILE"
-                else
-                    echo "$key_val" >> "$ENV_FILE"
-                fi
-            done
-            # 同步到项目目录
-            if [ -f "$SCRIPT_DIR/.env" ]; then
-                cp "$ENV_FILE" "$SCRIPT_DIR/.env"
-            fi
-            print_success "飞书凭证已自动同步到 .env"
-        fi
-    fi
-
-    # 如果仍然没有 feishu.json（用户跳过了扫码），提示手动输入
-    if [ ! -f "$feishu_config" ]; then
-        echo ""
-        print_info "未检测到飞书配置，可手动补录凭证到 .env:"
-        echo "  FEISHU_APP_ID=cli_xxxxxx"
-        echo "  FEISHU_APP_SECRET=xxxxxxxx"
-        echo "  配置文件: ${HOME_DIR}/.hunqi/.env"
-    fi
-}
-
-# ───────────────────────────────────────────────
-# 步骤 4: 企微配置
-# ───────────────────────────────────────────────
-step4_qiwei() {
-    print_step "4/5" "企业微信通道（可选）"
-
-    if ! command -v opencode-qiwei &>/dev/null; then
-        print_info "opencode-qiwei 未安装，跳过企微配置"
-        print_info "如需企微通道，安装命令: npm install -g @neomei/opencode-qiwei"
-        print_info "安装后运行: opencode-qiwei setup"
-        return 0
-    fi
-
-    local qiwei_config="${HOME_DIR}/.config/opencode/qiwei.json"
-
-    # 非交互模式跳过
-    if [ "$NONINTERACTIVE" = "1" ]; then
-        if [ -f "$qiwei_config" ]; then
-            print_success "企微配置已存在"
-        else
-            print_info "非交互模式跳过企微配置"
-            print_info "请手动运行: opencode-qiwei setup"
-        fi
-        return 0
-    fi
-
-    if [ -f "$qiwei_config" ]; then
-        print_success "企微配置已存在"
-        if ask_continue "是否重新配置企微"; then
-            echo ""
-            opencode-qiwei setup
-        else
-            print_info "跳过企微配置"
-        fi
-    else
-        if ask_continue "是否现在配置企微"; then
-            opencode-qiwei setup
-        else
-            print_info "跳过企微配置，稍后手动运行: opencode-qiwei setup"
-        fi
-    fi
-}
-
-# ───────────────────────────────────────────────
-# 步骤 5: 验证和启动
-# ───────────────────────────────────────────────
-step5_verify_start() {
-    print_step "5/5" "验证和启动"
-
-    # 验证飞书
-    if command -v opencode-feishu &>/dev/null; then
-        echo ""
-        print_info "检查飞书连接..."
-        if opencode-feishu doctor 2>/dev/null; then
-            print_success "飞书连接正常"
-        else
-            print_warning "飞书连接检查未通过，请检查配置"
-        fi
-    fi
-
-    echo ""
-    print_info "配置完成！"
-    echo ""
-    echo -e "${GREEN}━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━${NC}"
-    echo -e "${GREEN}  🎉 魂器初始配置完成！${NC}"
-    echo -e "${GREEN}━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━${NC}"
-    echo ""
-
-    # 启动选项
-    if [ "$EUID" -eq 0 ] || sudo -n true 2>/dev/null; then
-        if [ "$NONINTERACTIVE" = "1" ]; then
-            # 非交互模式：自动启动 systemd
-            echo ""
-            print_info "自动启动 systemd 服务..."
-            sudo systemctl start "hunqi-core@${USER_NAME}" 2>/dev/null || print_warning "hunqi-core 启动失败"
-            sleep 3
-            sudo systemctl start "channel-feishu@${USER_NAME}" 2>/dev/null || print_warning "channel-feishu 启动失败"
-            echo ""
-            print_success "服务已启动"
-            echo "  查看状态: sudo systemctl status channel-feishu@${USER_NAME}"
-            echo "  查看日志: sudo journalctl -u channel-feishu@${USER_NAME} -f"
-        else
-            echo -e "${CYAN}启动方式选择:${NC}"
-            echo ""
-            echo "  1) systemd 后台运行（推荐，支持开机自启）"
-            echo "  2) 前台运行（适合调试）"
-            echo "  3) 暂不启动"
-            echo ""
-
-            local choice
-            safe_read "  请选择 [1]: " choice
-            choice="${choice:-1}"
-
-            case "$choice" in
-                1)
-                    echo ""
-                    print_info "启动 systemd 服务..."
-                    sudo systemctl start "hunqi-core@${USER_NAME}" 2>/dev/null || print_warning "hunqi-core 启动失败"
-                    sleep 3
-                    sudo systemctl start "channel-feishu@${USER_NAME}" 2>/dev/null || print_warning "channel-feishu 启动失败"
-                    echo ""
-                    print_success "服务已启动"
-                    echo "  查看状态: sudo systemctl status channel-feishu@${USER_NAME}"
-                    echo "  查看日志: sudo journalctl -u channel-feishu@${USER_NAME} -f"
-                    ;;
-                2)
-                    echo ""
-                    print_info "前台启动..."
-                    echo "  运行: cd $SCRIPT_DIR && hunqi start"
-                    ;;
-                *)
-                    print_info "已跳过启动"
-                    echo ""
-                    echo "  后台启动: sudo systemctl start hunqi-core@${USER_NAME}"
-                    echo "  前台启动: cd $SCRIPT_DIR && hunqi start"
-                    ;;
-            esac
-        fi
-    else
-        echo "  前台启动: cd $SCRIPT_DIR && hunqi start"
-        echo "  交互 TUI: cd $SCRIPT_DIR && hunqi interactive"
-    fi
-
-    echo ""
-    echo "  其他常用命令:"
-    echo "    hunqi doctor          # 系统诊断"
-    echo "    hunqi status          # 查看状态"
-    echo "    opencode-feishu setup # 重新配置飞书"
-    echo ""
-}
-
-# ═══════════════════════════════════════════════
-# 主程序
-# ═══════════════════════════════════════════════
-
-print_header
-
-# 如果不在项目目录，尝试自动定位
-if [ ! -f "$SCRIPT_DIR/package.json" ]; then
-    if [ -f "${HOME_DIR}/.hunqi/agent-soul-framework/packages/agent-soul-framework/package.json" ]; then
-        SCRIPT_DIR="${HOME_DIR}/.hunqi/agent-soul-framework/packages/agent-soul-framework"
-        cd "$SCRIPT_DIR"
-        print_info "自动定位到核心框架目录: $SCRIPT_DIR"
-    else
-        print_error "未找到魂器核心框架目录"
-        exit 1
-    fi
-fi
-
-step1_check_env
-step2_env_config
-step3_feishu
-step4_qiwei
-step5_verify_start

package/setup.sh

@@ -1,128 +0,0 @@
-#!/bin/bash
-# setup.sh - 魂器初始化脚本
-# 一键检查和修复 .opencode/opencode.json 配置，确保插件注册、模型配置完整
-
-set -e
-
-cd "$(dirname "$0")"
-
-OPENCODE_JSON=".opencode/opencode.json"
-OPENCODE_EXAMPLE=".opencode/opencode.json.example"
-
-echo "🚀 魂器初始化 (Agent Soul Framework Setup)"
-echo ""
-
-# ========== Step 1: 确保 opencode.json 存在 ==========
-if [ ! -f "$OPENCODE_JSON" ]; then
-    echo "📄 $OPENCODE_JSON 不存在，从模板创建..."
-    if [ -f "$OPENCODE_EXAMPLE" ]; then
-        cp "$OPENCODE_EXAMPLE" "$OPENCODE_JSON"
-    else
-        echo "❌ 错误: $OPENCODE_EXAMPLE 也不存在"
-        exit 1
-    fi
-    echo "✅ 已创建 $OPENCODE_JSON"
-    echo "⚠️  请编辑该文件填入你的 API key 和 provider 配置"
-    echo ""
-fi
-
-# ========== Step 2: 用 Python 检查和修复 JSON 配置 ==========
-python3 << 'PYTHON_SCRIPT'
-import json
-import sys
-
-OPENCODE_JSON = ".opencode/opencode.json"
-
-with open(OPENCODE_JSON, "r") as f:
-    content = f.read()
-
-try:
-    config = json.loads(content)
-except json.JSONDecodeError as e:
-    print(f"❌ {OPENCODE_JSON} JSON 格式错误: {e}")
-    sys.exit(1)
-
-modified = False
-
-# --- 2.1 检查并添加 plugin 配置 ---
-if "plugin" not in config:
-    config["plugin"] = ["./tools/read-plugin.js"]
-    print("🔧 添加 plugin 配置: ./tools/read-plugin.js")
-    modified = True
-else:
-    plugins = config["plugin"]
-    if isinstance(plugins, list):
-        if "./tools/read-plugin.js" not in plugins:
-            plugins.append("./tools/read-plugin.js")
-            print("🔧 添加 plugin 配置: ./tools/read-plugin.js")
-            modified = True
-        else:
-            print("✅ plugin 配置已存在")
-    else:
-        config["plugin"] = ["./tools/read-plugin.js"]
-        print("🔧 修复 plugin 配置: ./tools/read-plugin.js")
-        modified = True
-
-# --- 2.2 检查并添加 compaction 配置 ---
-if "compaction" not in config:
-    config["compaction"] = {
-        "auto": True,
-        "prune": True,
-        "tail_turns": 3,
-        "preserve_recent_tokens": 8000,
-        "reserved": 16384
-    }
-    print("🔧 添加 compaction 配置")
-    modified = True
-else:
-    print("✅ compaction 配置已存在")
-
-# --- 2.3 检查 model 是否已设置 ---
-if "model" not in config or not config["model"] or config["model"] == "your-default-model":
-    print("⚠️  model 未配置，请在 {OPENCODE_JSON} 中设置默认模型")
-else:
-    print(f"✅ 默认模型: {config['model']}")
-
-# --- 2.4 检查 provider 是否已设置 ---
-if "provider" not in config or not config["provider"]:
-    print("⚠️  provider 未配置，请在 {OPENCODE_JSON} 中设置 API provider")
-else:
-    providers = list(config["provider"].keys())
-    print(f"✅ 已配置 providers: {', '.join(providers)}")
-
-# --- 2.5 检查模型是否有 attachment/modalities/limit 配置 ---
-if "provider" in config and isinstance(config["provider"], dict):
-    for pname, pdata in config["provider"].items():
-        if "models" in pdata and isinstance(pdata["models"], dict):
-            for mname, mdata in pdata["models"].items():
-                if isinstance(mdata, dict):
-                    missing = []
-                    if "attachment" not in mdata:
-                        missing.append("attachment")
-                    if "modalities" not in mdata:
-                        missing.append("modalities")
-                    if "limit" not in mdata:
-                        missing.append("limit")
-                    if missing:
-                        print(f"⚠️  provider '{pname}' 模型 '{mname}' 缺少配置: {', '.join(missing)}")
-
-# 保存修改
-if modified:
-    with open(OPENCODE_JSON, "w") as f:
-        json.dump(config, f, indent=2, ensure_ascii=False)
-        f.write("\n")
-    print("")
-    print("✅ 配置已自动修复并保存")
-else:
-    print("")
-    print("✅ 配置检查通过，无需修改")
-
-PYTHON_SCRIPT
-
-echo ""
-echo "📋 初始化完成"
-echo ""
-echo "下一步:"
-echo "  1. 编辑 .opencode/opencode.json 填入 API key"
-echo "  2. 运行 ./hunqi.sh interactive 启动交互模式"
-echo ""