@neilberkman/sidereon 0.32.0 → 0.33.1

package/third_party_source/sidereon-core-0.33.1/tides/pole.rs

@@ -0,0 +1,203 @@
+//! Solid-Earth pole tide station displacement (IERS Conventions 2010, §7.1.4).
+//!
+//! [`solid_earth_pole_tide`] computes the displacement of an Earth-fixed (ITRF)
+//! station caused by the centrifugal-potential change of polar motion (the
+//! "rotational deformation due to polar motion"). It is the sibling of
+//! [`super::solid_earth_tide`] and is wired into the PPP correction stack in the
+//! identical way: a per-epoch station displacement vector projected onto the
+//! line of sight.
+//!
+//! Physics (IERS Conventions 2010, Chapter 7, §7.1.4):
+//!
+//! * The wobble variables are formed from the polar motion `(xp, yp)` and the
+//!   IERS conventional mean pole `(x_bar, y_bar)`:
+//!
+//! ```text
+//! m1 =  xp - x_bar   (arcsec)
+//! m2 = -(yp - y_bar) (arcsec)
+//! ```
+//!
+//! * The displacement, in the local radial / colatitude / longitude triad, is
+//!   IERS Conventions (2010) Eq. (7.24):
+//!
+//! ```text
+//! S_r      = -33 sin(2 theta) (m1 cos lambda + m2 sin lambda)  mm
+//! S_theta  =  -9 cos(2 theta) (m1 cos lambda + m2 sin lambda)  mm
+//! S_lambda =   9 cos(theta)   (m1 sin lambda - m2 cos lambda)  mm
+//! ```
+//!
+//!   where `theta` is the geocentric colatitude and `lambda` the longitude. The
+//!   integer mm coefficients embed the nominal degree-2 Love/Shida numbers
+//!   h2 = 0.6078 and l2 = 0.0847 (radial scales with h2; the horizontal terms
+//!   with l2). `S_theta` points to increasing colatitude (south), so the local
+//!   north component is `-S_theta`; `S_lambda` is east; `S_r` is up.
+//!
+//! Mean pole model. The IERS 2010 conventional mean pole (a cubic until 2010.0,
+//! linear thereafter; IERS Conventions 2010 Table 7.7) was revised in 2018 to a
+//! single **linear secular pole**, because the original post-2010 linear
+//! extrapolation diverges from the observed secular drift at the multi-cm level
+//! within a decade. This module uses the **revised IERS (2018) linear secular
+//! pole** (updated Chapter 7), which is the conventional model for the modern
+//! (post-2010) epochs Sidereon targets and the one adopted for ITRF2014/2020:
+//!
+//! ```text
+//! x_bar(t) =  55.0 + 1.677 (t - 2000.0)  mas
+//! y_bar(t) = 320.5 + 3.460 (t - 2000.0)  mas
+//! ```
+//!
+//! with `t` the epoch in years. (The widely used RTKLIB still applies the
+//! superseded 2010 cubic+linear model; at a 2026 epoch the two mean poles differ
+//! by >0.1 arcsec in x, which is why the choice is documented here.)
+//!
+//! Polar motion `(xp, yp)` is **not** available from the engine's embedded EOP
+//! table (it carries UT1-UTC only; see
+//! `crate::astro::frames::transforms::PolarMotion`). The caller therefore
+//! supplies `xp`/`yp` in arcseconds, sourced from IERS EOP exactly like the
+//! other Earth-orientation inputs. They must not be fabricated.
+
+#[cfg(test)]
+mod tests;
+
+use crate::astro::constants::time::{DAYS_PER_JULIAN_YEAR, J2000_JD};
+use crate::astro::constants::units::MM_PER_M;
+use crate::astro::math::vec3::norm3_ref as norm;
+use crate::validate;
+
+use super::{gregorian_to_two_part_julian_date, invalid_tide_input, TideError};
+
+/// IERS (2018) linear secular pole coefficients, in milliarcseconds and
+/// milliarcseconds per year (revised IERS Conventions 2010, updated Chapter 7).
+const MEAN_POLE_X0_MAS: f64 = 55.0;
+const MEAN_POLE_X_RATE_MAS_PER_YR: f64 = 1.677;
+const MEAN_POLE_Y0_MAS: f64 = 320.5;
+const MEAN_POLE_Y_RATE_MAS_PER_YR: f64 = 3.460;
+
+/// Eq. (7.24) displacement coefficients in millimetres per arcsecond of wobble.
+/// The radial coefficient carries Love number h2 = 0.6078; the horizontal
+/// coefficients carry Shida number l2 = 0.0847.
+const RADIAL_MM_PER_ARCSEC: f64 = -33.0;
+const COLATITUDE_MM_PER_ARCSEC: f64 = -9.0;
+const LONGITUDE_MM_PER_ARCSEC: f64 = 9.0;
+
+/// Solid-Earth pole tide displacement of an ITRF station, in metres (ECEF).
+///
+/// Arguments:
+/// * `xsta` - geocentric station position (m, ITRF).
+/// * `year`, `month`, `day` - UTC calendar date (selects the mean pole epoch).
+/// * `fhr` - UTC fractional hour of the day (`hour + min/60 + sec/3600`).
+/// * `xp_arcsec`, `yp_arcsec` - IERS polar motion of the date (arcsec). These
+///   are a data dependency the caller supplies from IERS EOP; the engine does
+///   not embed them.
+///
+/// Returns the displacement vector (m, geocentric ITRF), to be projected onto
+/// the line of sight identically to [`super::solid_earth_tide`].
+///
+/// Returns [`TideError`] when inputs are non-finite, the date/hour is invalid,
+/// or the station vector is degenerate (zero radius or on the polar axis).
+pub fn solid_earth_pole_tide(
+    xsta: &[f64; 3],
+    year: i32,
+    month: i32,
+    day: i32,
+    fhr: f64,
+    xp_arcsec: f64,
+    yp_arcsec: f64,
+) -> Result<[f64; 3], TideError> {
+    validate_pole_tide_domain(xsta, year, month, day, fhr, xp_arcsec, yp_arcsec)?;
+    Ok(solid_earth_pole_tide_unchecked(
+        xsta, year, month, day, fhr, xp_arcsec, yp_arcsec,
+    ))
+}
+
+fn validate_pole_tide_domain(
+    xsta: &[f64; 3],
+    year: i32,
+    month: i32,
+    day: i32,
+    fhr: f64,
+    xp_arcsec: f64,
+    yp_arcsec: f64,
+) -> Result<(), TideError> {
+    validate::finite_vec3(*xsta, "station position").map_err(invalid_tide_input)?;
+    validate::civil_datetime_with_second_policy(
+        i64::from(year),
+        i64::from(month),
+        i64::from(day),
+        0,
+        0,
+        0.0,
+        validate::CivilSecondPolicy::Continuous,
+    )
+    .map_err(invalid_tide_input)?;
+    validate::finite_in_range_exclusive_upper(fhr, 0.0, 24.0, "fractional hour")
+        .map_err(invalid_tide_input)?;
+    validate::finite(xp_arcsec, "polar motion xp").map_err(invalid_tide_input)?;
+    validate::finite(yp_arcsec, "polar motion yp").map_err(invalid_tide_input)?;
+
+    validate::finite_positive(norm(xsta), "station radius").map_err(invalid_tide_input)?;
+    let station_horizontal_radius = (xsta[0] * xsta[0] + xsta[1] * xsta[1]).sqrt();
+    validate::finite_positive(station_horizontal_radius, "station horizontal radius")
+        .map_err(invalid_tide_input)?;
+
+    Ok(())
+}
+
+fn solid_earth_pole_tide_unchecked(
+    xsta: &[f64; 3],
+    year: i32,
+    month: i32,
+    day: i32,
+    fhr: f64,
+    xp_arcsec: f64,
+    yp_arcsec: f64,
+) -> [f64; 3] {
+    let (x_bar_arcsec, y_bar_arcsec) = mean_pole_arcsec(year, month, day, fhr);
+
+    // Wobble variables (arcsec), IERS Conventions (2010) §7.1.4.
+    let m1 = xp_arcsec - x_bar_arcsec;
+    let m2 = -(yp_arcsec - y_bar_arcsec);
+
+    // Geocentric station triad: theta is colatitude, lambda longitude.
+    let rsta = norm(xsta);
+    let sinphi = xsta[2] / rsta; // cos(theta)
+    let cosphi = (xsta[0] * xsta[0] + xsta[1] * xsta[1]).sqrt() / rsta; // sin(theta)
+    let sinla = xsta[1] / cosphi / rsta;
+    let cosla = xsta[0] / cosphi / rsta;
+
+    let sin2theta = 2.0 * cosphi * sinphi;
+    let cos2theta = sinphi * sinphi - cosphi * cosphi;
+    let costheta = sinphi;
+
+    let radial_factor = m1 * cosla + m2 * sinla;
+    let longitude_factor = m1 * sinla - m2 * cosla;
+
+    // Eq. (7.24), in millimetres.
+    let s_r = RADIAL_MM_PER_ARCSEC * sin2theta * radial_factor;
+    let s_theta = COLATITUDE_MM_PER_ARCSEC * cos2theta * radial_factor;
+    let s_lambda = LONGITUDE_MM_PER_ARCSEC * costheta * longitude_factor;
+
+    // Local radial/north/east displacement in metres (north = -S_theta).
+    let up = s_r / MM_PER_M;
+    let north = -s_theta / MM_PER_M;
+    let east = s_lambda / MM_PER_M;
+
+    // Geocentric ENU -> ECEF, matching the solid-earth tide convention.
+    [
+        up * cosla * cosphi - east * sinla - north * sinphi * cosla,
+        up * sinla * cosphi + east * cosla - north * sinphi * sinla,
+        up * sinphi + north * cosphi,
+    ]
+}
+
+/// IERS (2018) linear secular mean pole at the given UTC epoch, in arcseconds.
+fn mean_pole_arcsec(year: i32, month: i32, day: i32, fhr: f64) -> (f64, f64) {
+    // Epoch in years since J2000.0 (RTKLIB-compatible Julian-year measure).
+    let (jd0, jd1) = gregorian_to_two_part_julian_date(year, month, day);
+    let years = ((jd0 - J2000_JD) + jd1 + fhr / 24.0) / DAYS_PER_JULIAN_YEAR;
+
+    let x_bar_mas = MEAN_POLE_X0_MAS + MEAN_POLE_X_RATE_MAS_PER_YR * years;
+    let y_bar_mas = MEAN_POLE_Y0_MAS + MEAN_POLE_Y_RATE_MAS_PER_YR * years;
+
+    // Milliarcseconds -> arcseconds.
+    (x_bar_mas / 1000.0, y_bar_mas / 1000.0)
+}

package/types/sidereon-extra.cjs

@@ -0,0 +1,2 @@
+// Backward-compatible CommonJS runtime target for the legacy type-only subpath.
+module.exports = {};

package/types/sidereon-extra.js

@@ -0,0 +1,2 @@
+// Backward-compatible runtime target for the legacy type-only subpath.
+export {};