@napuketto/cli 0.4.2 → 0.4.3

package/dist/index.mjs

@@ -766,8 +766,9 @@ function writeAccountRuntime(dataRoot, state) {
 function readAccountRuntime(dataRoot, uin) {
 	return readJson(runtimeStatePath(dataRoot, uin));
 }
-/** 写 supervisor 运行时状态。 */
+/** 写 supervisor 运行时状态（数据根缺省时自动创建——首次在新目录 start 不再 ENOENT）。 */
 function writeSupervisorRuntime(dataRoot, state) {
+	mkdirSync(dataRoot, { recursive: true });
 	writeFileSync(supervisorStatePath(dataRoot), `${JSON.stringify(state, null, 2)}\n`, "utf8");
 }
 /** 读 supervisor 运行时状态（缺失返回 null）。 */

package/dist/index.mjs.map

@@ -1 +1 @@
-{"version":3,"file":"index.mjs","names":[],"sources":["../src/config/schema.ts","../src/config/inline.ts","../src/logger.ts","../src/config/template.ts","../src/config/store.ts","../src/commands/config.ts","../src/runtime/state.ts","../src/commands/ops.ts","../src/runtime/boot.ts","../src/runtime/supervisor.ts","../src/commands/start.ts","../src/cli/error.ts","../src/cli/program.ts","../src/index.ts"],"sourcesContent":["/**\n * 主配置类型与手写校验器（原 config-cmds.ts 拆分，2026-08-08 FTA 优化）\n *\n * 主配置 parse（不引入 zod）：数据根 / 自动重启 / 重启延迟 / 账号列表。\n * 2026-08-08 结构拍板：**一个 QQ 账号一个 [[accounts]] 段，协议与通信配置嵌在\n * 账号内**（[accounts.onebot11] / [accounts.satori]）；账号必填（至少一个）。\n * 协议段为宽松对象，装配时由对应协议包的 zod schema 严格校验。\n * 全部校验错误为 ConfigError（2026-10-25 嵌入式退出码契约：CLI exit 78 一族，\n * 内联与文件两形态共用本校验器）。\n */\nimport { configError, type LogConfig, parseLogConfig, resolveDataRoot } from \"@napuketto/kernel\";\n\n/** 保留占位 QQ 号（模板默认值）：必须替换为真实 QQ 号，否则启动校验报错。 */\nexport const RESERVED_PLACEHOLDER_QINS = [\"123456\", \"654321\"] as const;\n\n/** 默认自动重启。 */\nconst DEFAULT_AUTO_RESTART = true;\n/** 默认重启延迟（毫秒；supervisor 显式 -q 场景复用，避免两处常量漂移）。 */\nexport const DEFAULT_RESTART_DELAY_MS = 2000;\n\n/** QQ 号格式：纯数字 5-11 位（QQ 号合法范围，勿写死 11 位）。 */\nconst QQ_IN_FORMAT_RE = /^\\d{5,11}$/;\n\n/** 协议段键（宽松对象，装配时 zod 严格校验）。 */\ntype ProtocolKey = \"onebot11\" | \"satori\" | \"kurobot\" | \"milky\";\n\n/** 账号配置项（qq 必填；协议段缺省 = 该账号不启用对应协议）。 */\nexport interface CliAccountConfig {\n    qq: string;\n    enabled?: boolean;\n    /** OneBot 11 协议段（与 ob11ConfigSchema 对应，宽松对象，装配时 zod 校验）。 */\n    onebot11?: Record<string, unknown>;\n    /** Satori 协议段（与 satoriConfigSchema 对应，宽松对象，装配时 zod 校验）。 */\n    satori?: Record<string, unknown>;\n    /** Kurobot 协议段（与 kurobotConfigSchema 对应，宽松对象，装配时 zod 校验）。 */\n    kurobot?: Record<string, unknown>;\n    /** Milky 协议段（与 milkyConfigSchema 对应，宽松对象，装配时 zod 校验）。 */\n    milky?: Record<string, unknown>;\n}\n\n/** 主配置（跨账号，全局单文件 TOML）。 */\nexport interface CliConfig {\n    /** 数据根目录（绝对路径）。 */\n    dataDir: string;\n    /** supervisor 是否自动重启崩溃账号。 */\n    autoRestart: boolean;\n    /** 崩溃后重启延迟（毫秒）。 */\n    restartDelayMs: number;\n    /** 账号列表（至少一个，qq 必填）。 */\n    accounts: CliAccountConfig[];\n    /** [log] 日志配置段（kernel parseLogConfig 解析；未配置段时 undefined = 全缺省）。 */\n    log?: LogConfig;\n}\n\n/** 解析账号内协议段（宽松对象，装配时由 zod schema 严格校验）。 */\nfunction parseProtocolSection(\n    raw: Record<string, unknown>,\n    key: ProtocolKey,\n): Record<string, unknown> | undefined {\n    const section = raw[key];\n    if (section === undefined) {\n        return;\n    }\n    if (typeof section !== \"object\" || section === null) {\n        throw configError(`主配置账号 ${key} 段必须是对象`);\n    }\n    return section as Record<string, unknown>;\n}\n\n/**\n * 解析 dataDir（缺省用当前解析的数据根 = 项目根/.napuketto）。\n * 支持绝对路径、\"~/\" 前缀（用户主目录）、相对路径（相对启动目录），\n * 消费端 resolveDataRoot 统一展开为绝对路径。\n */\nfunction parseDataDir(raw: Record<string, unknown>): string {\n    if (raw[\"dataDir\"] === undefined) {\n        return resolveDataRoot();\n    }\n    if (typeof raw[\"dataDir\"] !== \"string\" || raw[\"dataDir\"] === \"\") {\n        throw configError(\"主配置 dataDir 必须是非空字符串\");\n    }\n    return raw[\"dataDir\"];\n}\n\n/** 解析 autoRestart。 */\nfunction parseAutoRestart(raw: Record<string, unknown>): boolean {\n    if (raw[\"autoRestart\"] === undefined) {\n        return DEFAULT_AUTO_RESTART;\n    }\n    if (typeof raw[\"autoRestart\"] !== \"boolean\") {\n        throw configError(\"主配置 autoRestart 必须是布尔值\");\n    }\n    return raw[\"autoRestart\"];\n}\n\n/** 解析 restartDelayMs（毫秒）。 */\nfunction parseRestartDelayMs(raw: Record<string, unknown>): number {\n    if (raw[\"restartDelayMs\"] === undefined) {\n        return DEFAULT_RESTART_DELAY_MS;\n    }\n    if (\n        typeof raw[\"restartDelayMs\"] !== \"number\" ||\n        !Number.isInteger(raw[\"restartDelayMs\"]) ||\n        raw[\"restartDelayMs\"] <= 0\n    ) {\n        throw configError(\"主配置 restartDelayMs 必须是正整数\");\n    }\n    return raw[\"restartDelayMs\"];\n}\n\n/** 解析 accounts（必须至少一个账号，qq 必填）。 */\nfunction parseAccounts(raw: Record<string, unknown>): CliAccountConfig[] {\n    if (raw[\"accounts\"] === undefined) {\n        throw configError(\n            \"主配置缺少 accounts（必须至少一个账号）；首次启动已生成模板，请编辑后重试\",\n        );\n    }\n    if (!Array.isArray(raw[\"accounts\"]) || raw[\"accounts\"].length === 0) {\n        throw configError(\n            \"主配置 accounts 必须是非空数组（至少一个 QQ 账号）；首次启动已生成模板，请编辑后重试\",\n        );\n    }\n    const accounts: CliAccountConfig[] = [];\n    for (const item of raw[\"accounts\"]) {\n        accounts.push(parseAccount(item));\n    }\n    return accounts;\n}\n\n/** 账号 qq 必填校验（非空字符串）。 */\nfunction parseAccountQq(raw: Record<string, unknown>): string {\n    const qq = raw[\"qq\"];\n    if (typeof qq !== \"string\" || qq === \"\") {\n        throw configError(\"主配置账号缺少非空 qq\");\n    }\n    assertValidQqFormat(qq);\n    return qq;\n}\n\n/** qq 格式与占位值校验（5-11 位纯数字；模板占位号显式指路不静默）。 */\nfunction assertValidQqFormat(qq: string): void {\n    if (!QQ_IN_FORMAT_RE.test(qq)) {\n        throw configError(\"主配置账号 qq 必须是 5-11 位纯数字 QQ 号\");\n    }\n    if (RESERVED_PLACEHOLDER_QINS.some((placeholder) => placeholder === qq)) {\n        throw configError(\n            `主配置账号 qq \"${qq}\" 是模板占位值，请编辑配置文件填入真实 QQ 号后再启动`,\n        );\n    }\n}\n\n/** 账号 enabled 可选校验（缺省 = 启用；显式给值必须是布尔）。 */\nfunction applyAccountEnabled(out: CliAccountConfig, enabled: unknown): void {\n    if (enabled === undefined) {\n        return;\n    }\n    if (typeof enabled !== \"boolean\") {\n        throw configError(\"主配置账号 enabled 必须是布尔值\");\n    }\n    out.enabled = enabled;\n}\n\n/** 账号内协议段装配（onebot11/satori/kurobot/milky 缺省 = 不启用该协议）。 */\nfunction applyProtocolSections(raw: Record<string, unknown>, out: CliAccountConfig): void {\n    const onebot11 = parseProtocolSection(raw, \"onebot11\");\n    if (onebot11 !== undefined) {\n        out.onebot11 = onebot11;\n    }\n    const satori = parseProtocolSection(raw, \"satori\");\n    if (satori !== undefined) {\n        out.satori = satori;\n    }\n    const kurobot = parseProtocolSection(raw, \"kurobot\");\n    if (kurobot !== undefined) {\n        out.kurobot = kurobot;\n    }\n    const milky = parseProtocolSection(raw, \"milky\");\n    if (milky !== undefined) {\n        out.milky = milky;\n    }\n}\n\n/** 解析单个账号项（qq 必填；协议段缺省 = 不启用）。 */\nfunction parseAccount(item: unknown): CliAccountConfig {\n    if (typeof item !== \"object\" || item === null) {\n        throw configError(\"主配置 accounts 元素必须是对象\");\n    }\n    const raw = item as Record<string, unknown>;\n    const out: CliAccountConfig = { qq: parseAccountQq(raw) };\n    applyAccountEnabled(out, raw[\"enabled\"]);\n    applyProtocolSections(raw, out);\n    return out;\n}\n\n/**\n * [log] 段落库净化：format 为 undefined（= 按 TTY 自动）时剔除该键，\n * 避免 toml 回写（config list/apply 的 stringifyToml）遇到 undefined 值。\n */\nfunction stripUndefinedFormat(log: LogConfig): LogConfig {\n    const { format, ...rest } = log;\n    return format === undefined ? rest : { ...rest, format };\n}\n\n/**\n * [log] 段解析（kernel parseLogConfig 错误归一为 ConfigError）：日志段非法同属\n * 「配置未就绪」一族（exit 78）；错误文案保持 kernel 原文（主配置 log.xxx ...）。\n */\nfunction parseLogSection(input: unknown): LogConfig {\n    try {\n        return parseLogConfig(input);\n    } catch (err) {\n        const detail = err instanceof Error ? err.message : String(err);\n        throw configError(`主配置 [log] 段非法: ${detail}`, { cause: err });\n    }\n}\n\n/** 手写校验器：主配置 parse（不引入 zod）。全部校验错误为 ConfigError（exit 78 一族）。 */\nexport function parseCliConfig(input: unknown): CliConfig {\n    if (typeof input !== \"object\" || input === null) {\n        throw configError(\"主配置必须是对象\");\n    }\n    const raw = input as Record<string, unknown>;\n    const dataDir = parseDataDir(raw);\n    const autoRestart = parseAutoRestart(raw);\n    const restartDelayMs = parseRestartDelayMs(raw);\n    const accounts = parseAccounts(raw);\n    // [log] 段：kernel parseLogConfig 严格校验（非法值报错；未配置段 = undefined）\n    const log =\n        raw[\"log\"] !== undefined ? stripUndefinedFormat(parseLogSection(raw[\"log\"])) : undefined;\n    return {\n        dataDir,\n        autoRestart,\n        restartDelayMs,\n        accounts,\n        ...(log !== undefined ? { log } : {}),\n    };\n}\n","/**\n * 内联配置（NAPKETTO_CONFIG_JSON，2026-10-25 嵌入式宿主契约）。\n *\n * KuroBridge 等嵌入式宿主每次拉起前整体生成配置，经环境变量喂 JSON 文本\n * （与 napuketto.toml 同构：parseCliConfig 直接吃 JSON.parse 产物），消除托管\n * toml 文件本体。优先级 NAPKETTO_CONFIG_JSON > NAPKETTO_CONFIG > 缺省模板生成；\n * 内联生效时不读 / 不写 / 不校验任何 toml 文件。Windows 单环境变量上限 32767\n * 字符（约 32KB），嵌入式配置形状远小于该限（超限宿主退回文件形态）。\n *\n * 读取口径分两档（有意为之）：\n * - parseInlineConfig：严格，主配置加载 / config validate 用；JSON 解析失败、\n *   非对象、字段校验失败一律 ConfigError（exit 78 一族）。\n * - readInlineConfigDoc / readInlineConfigSection：宽松，logger 读 [log] 段用；\n *   坏文档返回 undefined（日志配置损坏不阻塞启动，严格校验由主配置路径负责）。\n * loader 引导进程另有自己的宽松读取（编译期不静态依赖 kernel），两套不合并。\n *\n * 错误文案指明来源为「内联配置」且不含任何 toml 文件路径。本模块不 import\n * logger（logger.ts 反向依赖本模块判内联来源）。\n */\nimport process from \"node:process\";\nimport { configError } from \"@napuketto/kernel\";\nimport { type CliConfig, parseCliConfig } from \"./schema.js\";\n\n/** 内联配置 env 键（读取为精确键访问；Windows 上 process.env 本身大小写不敏感）。 */\nconst INLINE_CONFIG_ENV = \"NAPKETTO_CONFIG_JSON\";\n\n/** 配置来源。 */\nexport type ConfigSource = \"inline\" | \"file\";\n\n/**\n * 读取内联配置文本（未设置 / 空串 / 纯空白 → undefined，回退文件形态）。\n */\nexport function readInlineConfigText(): string | undefined {\n    const raw = process.env[INLINE_CONFIG_ENV];\n    if (raw === undefined || raw.trim() === \"\") {\n        return undefined;\n    }\n    return raw;\n}\n\n/** 内联是否生效（boot/装配链决定「不碰文件」的判定口径，与 readInlineConfigText 同源）。 */\nexport function isInlineConfigActive(): boolean {\n    return readInlineConfigText() !== undefined;\n}\n\n/** JSON.parse 产物 → 配置对象（数组 / null / 原始值 → undefined）。 */\nfunction asConfigObject(value: unknown): Record<string, unknown> | undefined {\n    if (typeof value !== \"object\" || value === null || Array.isArray(value)) {\n        return undefined;\n    }\n    return value as Record<string, unknown>;\n}\n\n/**\n * 读内联配置文档（宽松口径：未设置 / 空串 / JSON 解析失败 / 非对象 → undefined）。\n * 供日志段等「坏配置不阻塞启动」的消费方使用。\n */\nfunction readInlineConfigDoc(): Record<string, unknown> | undefined {\n    const text = readInlineConfigText();\n    if (text === undefined) {\n        return undefined;\n    }\n    try {\n        return asConfigObject(JSON.parse(text) as unknown);\n    } catch {\n        return undefined;\n    }\n}\n\n/** 读内联配置的单个顶层段（坏文档 → undefined；logger 读 [log] 用）。 */\nexport function readInlineConfigSection(key: string): unknown {\n    const doc = readInlineConfigDoc();\n    return doc === undefined ? undefined : doc[key];\n}\n\n/** 严格解析内联 JSON 对象（主配置校验入口；错误一概 ConfigError）。 */\nfunction parseJsonObject(text: string): Record<string, unknown> {\n    let doc: unknown;\n    try {\n        doc = JSON.parse(text);\n    } catch (err) {\n        const detail = err instanceof Error ? err.message : String(err);\n        throw configError(`内联配置 JSON 解析失败: ${detail}`, { cause: err });\n    }\n    const object = asConfigObject(doc);\n    if (object === undefined) {\n        throw configError(\"内联配置必须是 JSON 对象（与 napuketto.toml 同构）\");\n    }\n    return object;\n}\n\n/**\n * 内联 JSON 文本 → 校验后的主配置。JSON 解析失败 / 非对象 / 字段校验失败\n * 均抛 ConfigError（宿主消费 exit 78，不重试）。\n */\nexport function parseInlineConfig(text: string): CliConfig {\n    return parseCliConfig(parseJsonObject(text));\n}\n","/**\n * cli 进程级 logger（ADR-007 日志规范，2026-08-07 统一改造；2026-10-25 日志可配置化）。\n *\n * 复用 kernel `createLogger`；输出格式/级别/时间戳/颜色由 napuketto.toml [log] 段 +\n * 环境变量决定（kernel parseLogConfig 单一解析源）。懒构造：commander preAction\n * 钩子先 resolveCliLogConfig(dataDir)（banner 决策 + 缓存），首个日志调用时按\n * 缓存配置构造；未初始化时兜底用缺省数据根解析（-d 生效前的极早期日志）。\n *\n * 环境变量（优先级高于 toml，见 kernel parseLogConfig）：NAPUKETTO_LOG_LEVEL /\n * NAPUKETTO_LOG_FORMAT / NAPUKETTO_NO_BANNER / NAPUKETTO_LOG_COLORIZE，\n * 兼容旧拼写 NAPKETTO_LOG_LEVEL。\n */\nimport { readFileSync } from \"node:fs\";\nimport { isAbsolute, join } from \"node:path\";\nimport process from \"node:process\";\nimport {\n    createLogger,\n    type LogConfig,\n    type LogFormat,\n    parseLogConfig,\n    parseToml,\n    resolveConfigPath,\n    resolveDataRoot,\n} from \"@napuketto/kernel\";\nimport { isInlineConfigActive, readInlineConfigSection } from \"./config/inline.js\";\n\n/** 已解析日志配置缓存（preAction 首次解析后固定；-d 后续变化不影响已构造 logger）。 */\nlet cachedConfig: LogConfig | null = null;\n/** 解析配置时用的数据根（[log.file] 相对路径展开基准）。 */\nlet cachedDataRoot: string = resolveDataRoot();\n\n/** 同步解析日志配置（内联 > toml 文件的 [log] 段 + env 覆盖）。损坏/缺失配置回退缺省\n * （不阻塞启动：配置的严格校验由 loadCliConfig 主路径负责报错）。内联生效时不读\n * 任何 toml 文件（嵌入式契约，2026-10-25）。 */\nexport function resolveCliLogConfig(dataDir?: string): LogConfig {\n    if (cachedConfig !== null) {\n        return cachedConfig;\n    }\n    cachedDataRoot = resolveDataRoot(dataDir);\n    let section: unknown;\n    if (isInlineConfigActive()) {\n        // 宽松口径（config/inline 单一实现）：坏内联文档 → undefined，不阻塞日志构造\n        section = readInlineConfigSection(\"log\");\n    } else {\n        try {\n            const configPath = resolveConfigPath({ dataRoot: cachedDataRoot });\n            section = parseToml(readFileSync(configPath, \"utf8\"))[\"log\"];\n        } catch {\n            section = undefined;\n        }\n    }\n    try {\n        cachedConfig = parseLogConfig(section, process.env);\n    } catch {\n        // [log] 段非法：env 覆盖仍生效，缺省兜底（主配置加载路径会给出确切报错）\n        cachedConfig = parseLogConfig(undefined, process.env);\n    }\n    return cachedConfig;\n}\n\n/**\n * 顶层进程的最终控制台格式（[log] format 显式优先，否则按 TTY 自动：\n * 终端 pretty / 管道 single-line）。supervisor 的前缀转发决策同源。\n */\nexport function effectiveConsoleFormat(cfg: LogConfig): LogFormat {\n    const isTty = process.stdout.isTTY === true;\n    return cfg.format ?? (isTty ? \"pretty\" : \"single-line\");\n}\n\n/**\n * 顶层进程的有效控制台渲染决策（传播给子进程）：\n * 子进程 stdout 恒为 pipe（TTY 判定失真），由本进程按最终控制台形态决定\n * format/colorize 并经 env 注入（NAPUKETTO_LOG_FORMAT/NAPUKETTO_LOG_COLORIZE）。\n */\nexport function effectiveConsoleEnv(cfg: LogConfig): Record<string, string> {\n    const isTty = process.stdout.isTTY === true;\n    const format = effectiveConsoleFormat(cfg);\n    const colorize = cfg.colorize ?? (format === \"pretty\" && isTty);\n    return {\n        NAPUKETTO_LOG_FORMAT: format,\n        NAPUKETTO_LOG_COLORIZE: colorize ? \"1\" : \"0\",\n    };\n}\n\n/** [log.file] 相对路径按数据根展开。 */\nfunction resolveLogFilePath(path: string): string {\n    return isAbsolute(path) ? path : join(cachedDataRoot, path);\n}\n\n/**\n * 窄接口注解（避免 TS2883：createLogger 返回 pino.Logger，cli 不直接依赖 pino，\n * declaration emit 无法命名该类型；pino.Logger 结构兼容本接口）。\n */\nexport interface CliLogger {\n    info(obj: unknown, msg?: string): void;\n    warn(obj: unknown, msg?: string): void;\n    error(obj: unknown, msg?: string): void;\n    debug(obj: unknown, msg?: string): void;\n    trace(obj: unknown, msg?: string): void;\n    fatal(obj: unknown, msg?: string): void;\n}\n\n/** cli logger 构造参数（[log] 段折叠；file/fileLevel 成对生效，其余直传 undefined）。 */\nfunction cliLoggerOptions(cfg: LogConfig): Parameters<typeof createLogger>[0] {\n    return {\n        level: cfg.levels.cli ?? cfg.level,\n        format: cfg.format,\n        timestamp: cfg.timestamp,\n        colorize: cfg.colorize,\n        file: cfg.file !== undefined ? resolveLogFilePath(cfg.file.path) : undefined,\n        fileLevel: cfg.file?.level,\n        // name=cli：与 kernel/loader 统一（pretty 渲染 (cli/pid) 头，\n        // json 通道作 module 字段），service 保留作进程来源过滤\n        base: { name: \"cli\", service: \"cli\" },\n    };\n}\n\n/** 懒构造 cli 进程日志（name 渲染为 (cli/pid) 元数据头，文件 JSON 保留 name 字段可过滤）。 */\nclass LazyCliLogger implements CliLogger {\n    #inner: CliLogger | null = null;\n\n    #ensure(): CliLogger {\n        if (this.#inner === null) {\n            this.#inner = createLogger(cliLoggerOptions(resolveCliLogConfig()));\n        }\n        return this.#inner;\n    }\n\n    info(obj: unknown, msg?: string): void {\n        this.#ensure().info(obj, msg);\n    }\n    warn(obj: unknown, msg?: string): void {\n        this.#ensure().warn(obj, msg);\n    }\n    error(obj: unknown, msg?: string): void {\n        this.#ensure().error(obj, msg);\n    }\n    debug(obj: unknown, msg?: string): void {\n        this.#ensure().debug(obj, msg);\n    }\n    trace(obj: unknown, msg?: string): void {\n        this.#ensure().trace(obj, msg);\n    }\n    fatal(obj: unknown, msg?: string): void {\n        this.#ensure().fatal(obj, msg);\n    }\n}\n\n/** cli 进程日志（懒构造，配置见 resolveCliLogConfig）。 */\nexport const logger: CliLogger = new LazyCliLogger();\n","/**\n * 配置模板（TOML 注释版，原 config-cmds.ts 拆分，2026-08-08 FTA 优化）。\n * `config init` 与首次启动（loadCliConfig）缺失时生成。\n *\n * 2026-08-08 结构拍板：**一个 QQ 账号一个 [[accounts]] 段，协议与通信配置嵌在\n * 账号内**（[accounts.onebot11] / [accounts.satori]）；账号必填（至少一个）。\n * dataDir 不再写死（缺省 = 项目根/.napuketto，跨平台），模板保持可移植。\n */\nimport { RESERVED_PLACEHOLDER_QINS } from \"./schema.js\";\n\nexport function configTemplate(): string {\n    return `# ============================================================\n# NapukettoQQ 全局配置文件\n# ============================================================\n# 本文件由 \\`napuketto config init\\` 生成（或首次启动自动生成）。\n# 本机配置不入库（.gitignore）；修改后重启生效。\n#\n# 配置组织：一个 QQ 账号一个 [[accounts]] 段，协议与通信配置嵌在账号内\n# （[accounts.onebot11] / [accounts.satori] / [accounts.kurobot]）。账号没有写\n# 某协议段 = 该账号不启用该协议。账号必填（至少一个，qq 必填）。\n\n# ------------------------------------------------------------\n# 全局配置（跨账号）\n# ------------------------------------------------------------\n\n# 数据根目录：账号目录/日志/缓存/QQ 数据存放位置。\n# 缺省 = <项目根>/.napuketto（部署场景，跨平台，无需修改）。\n# 支持绝对路径、\"~/\" 前缀（用户主目录）、相对路径（相对启动目录）。\n# dataDir = \".napuketto\"\n\n# 多账号（supervisor）模式下，账号进程崩溃是否自动重启\nautoRestart = true\n\n# 崩溃后自动重启的延迟（毫秒）\nrestartDelayMs = 2000\n\n# ------------------------------------------------------------\n# 日志（[log]，可选——不配置即用缺省：终端 pretty 多行 / 管道 single-line）\n# ------------------------------------------------------------\n# 嵌入式宿主（把 napuketto 打进服务端等场景）推荐：\n#   [log]\n#   format = \"single-line\"     # 或 \"json\"（NDJSON，宿主按 level/module 精确路由）\n#   level = \"warn\"             # 控制台只留警告以上，细节进文件（配 [log.file]）\n#   banner = false\n#\n# [log]\n# format = \"pretty\"            # pretty | single-line | json（缺省按 TTY 自动）\n# level = \"info\"               # trace|debug|info|warn|error|fatal（控制台级别）\n# banner = true                # 启动字符画\n# timestamp = \"local\"          # local | iso8601 | elapsed\n# unboundReceive = true        # false = 未绑定频道的接收行不打（kurobot 握手后生效）\n# [log.levels]                 # 按模块覆盖级别：cli / kernel / loader / ob11\n# # loader = \"debug\"           # 例：终端上看接收行（默认已降 debug）\n# # ob11 = \"debug\"             # 例：协议校准数据（含原始 hex）\n# [log.file]                   # 独立文件 sink（可选；级别可低于控制台）\n# # path = \"logs/napuketto-console.log\"\n# # level = \"debug\"\n#\n# 环境变量覆盖（优先级高于本文件）：NAPUKETTO_LOG_LEVEL / NAPUKETTO_LOG_FORMAT /\n# NAPUKETTO_NO_BANNER（兼容旧拼写 NAPKETTO_LOG_LEVEL）。\n\n# ------------------------------------------------------------\n# 账号（至少一个，qq 必填）\n# ------------------------------------------------------------\n\n[[accounts]]\nqq = \"${RESERVED_PLACEHOLDER_QINS[0]}\"            # 占位值，必须替换为你的 QQ 号，否则启动报错\nenabled = true           # 是否启用（可选，缺省 true）\n\n[accounts.onebot11]      # 该账号的 OneBot 11 配置（无此段 = 不启用 OB11）\n\n# 鉴权 token（全局默认）：HTTP/WS 连接必须携带。\n#   校验方式：Authorization: Bearer <token> / 裸 token / URL 参数 ?access_token=<token>\n#   每个网络实例可单独覆盖（见下文各实例的 token 字段）。\n#   留空 = 不鉴权（仅本机调试推荐）。\n# token = \"\"\n\n# 心跳 meta 事件间隔（毫秒）；0 = 关闭心跳事件\nheartbeatInterval = 3000\n\n# 是否上报机器人自己发的消息（OB11 规范默认不上报）\nreportSelfMessage = false\n\n# 消息内容格式：array = 消息段数组（标准 OneBot 11），string = CQ 码字符串\nmessagePostFormat = \"array\"\n\n# 群文件报形式：false（默认）= message 事件 + file 段（go-cqhttp 兼容）；\n# true = 群文件消息改报 group_upload notice 事件（替代 message 事件）\ngroupUploadAsNotice = false\n\n# ---- HTTP 反向服务器（接收第三方 POST 指令），可配置多个 ----\n[[accounts.onebot11.httpServers]]\nenabled = true\nhost = \"127.0.0.1\"       # 监听地址；0.0.0.0 = 监听所有网卡（局域网可连）\nport = 3000\n# token = \"abc\"          # 可选：覆盖全局 token\n\n# ---- HTTP 正向上报（Webhook：把事件 POST 到第三方地址），可配置多个 ----\n# [[accounts.onebot11.httpPostUrls]]\n# enabled = true\n# url = \"http://127.0.0.1:8080/onebot\"   # 第三方接收地址\n# token = \"abc\"                          # 可选：覆盖全局 token\n# timeoutMs = 5000                       # 可选：上报超时（毫秒），缺省不超时\n\n# ---- WS 反向服务器（外部 WS 客户端主动连入），可配置多个 ----\n[[accounts.onebot11.wsServers]]\nenabled = true\nhost = \"127.0.0.1\"\nport = 3001\n# token = \"abc\"                          # 可选：覆盖全局 token\n# heartbeatInterval = 30000              # 可选：WS ping 间隔（毫秒）\n\n# ---- WS 正向客户端（主动连接外部 WS，双向），可配置多个 ----\n# [[accounts.onebot11.wsReverseUrls]]\n# enabled = true\n# url = \"ws://127.0.0.1:8081/ws\"         # 第三方 WS 地址（ws:// 或 wss://）\n# token = \"abc\"                          # 可选：覆盖全局 token\n# reconnectDelayMs = 5000                # 可选：断线重连延迟（毫秒）\n# maxReconnectAttempts = 10              # 可选：最大重连次数（缺省无限）\n# rejectUnauthorized = true              # 可选：wss:// 是否校验证书（自签证书设 false）\n# heartbeatInterval = 30000              # 可选：WS ping 间隔（毫秒）\n\n# 第二个账号示例（只开 Satori）：\n# [[accounts]]\n# qq = \"${RESERVED_PLACEHOLDER_QINS[1]}\"\n# [accounts.satori]\n# # token = \"\"                           # 可选：Satori 鉴权 token\n# [[accounts.satori.httpServers]]        # HTTP RPC（POST /v1/{resource}.{method}）\n# enabled = true\n# host = \"127.0.0.1\"\n# port = 5500\n# [[accounts.satori.wsServers]]          # WS 事件服务（/v1/events）\n# enabled = true\n# host = \"127.0.0.1\"\n# port = 5501\n\n# ------------------------------------------------------------\n# KuroBot 群服互通（kurobridge-ws 客户端，MVP-3）\n# ------------------------------------------------------------\n# 账号内写 [accounts.kurobot] 段即启用；不写 = 不启用。作为 WS 客户端\n# 主动连入 KuroBot 服务端（Minecraft 服务器 kurobot 插件）。\n# QQ 群文字 ↔ 游戏聊天双向互通；群命令（前缀开头）→ 游戏命令。\n# [accounts.kurobot]\n# url = \"ws://127.0.0.1:25580\"           # 必填：KuroBot 服务端地址（ws:// 或 wss://）\n# # token = \"\"                           # 可选：鉴权 token（服务端配了则必填，错 token 拒连）\n# # client = \"napukettoqq\"               # 可选：自报身份（缺省 napukettoqq/<版本>）\n# # commandPrefix = \"/\"                  # 可选：群命令前缀\n# # pingIntervalMs = 15000               # 可选：应用层心跳间隔（毫秒，须 < 30000）\n# # chatTemplate = \"[{player}] {content}\"    # 游戏聊天渲染模板\n# # joinTemplate = \"{player} 加入了服务器\"    # 玩家进服模板\n\n# ------------------------------------------------------------\n# Milky 协议（P0）\n# ------------------------------------------------------------\n# 账号内写 [accounts.milky] 段且 enabled = true 即启用；不写 = 不启用。\n# 单端口 HTTP：POST /api/:api 调用动作 + GET /event 事件推送（SSE / WS）。\n# [accounts.milky]\n# enabled = true                         # 启用开关（false = 不生效）\n# host = \"127.0.0.1\"                     # 监听地址\n# port = 3001                            # 监听端口（/api 与 /event 同端口）\n# # token = \"\"                           # 可选：access_token（空 = 不校验，仅限内网）\n# # eventModes = [\"sse\", \"ws\"]           # /event 允许的连接形态\n# # webhooks = []                        # 可选：额外事件推送地址（WebHook POST）\n# # cacheDir = \"cache\"                   # 可选：发送远程媒体 URI 的下载缓存目录\n# # leaveTemplate = \"{player} 离开了服务器\"   # 玩家退服模板\n# # deathTemplate = \"{player} {message}\"     # 玩家死亡模板（空消息显示「死亡了」）\n`;\n}\n","/**\n * 主配置 store：默认值、ConfigBase 子类、模板落盘、内联/文件来源加载。\n *\n * 从 config-cmds.ts 拆出（2026-10-25 模块收拢）：\n * - `CliConfigStore` 只负责 napuketto.toml 的读写/校验（kernel ConfigBase）；\n * - `loadCliConfigWithSource` 负责来源决议（NAPKETTO_CONFIG_JSON 优先）与来源日志；\n * - 4 个 config 子命令留在 commands/config.ts，不反向依赖本文件的私有实现。\n */\nimport { mkdirSync } from \"node:fs\";\nimport { access, writeFile } from \"node:fs/promises\";\nimport { dirname } from \"node:path\";\nimport type { ConfigSchema } from \"@napuketto/kernel\";\nimport { ConfigBase, resolveConfigPath, resolveDataRoot } from \"@napuketto/kernel\";\nimport { logger } from \"../logger.js\";\nimport { type ConfigSource, parseInlineConfig, readInlineConfigText } from \"./inline.js\";\nimport { type CliConfig, parseCliConfig } from \"./schema.js\";\nimport { configTemplate } from \"./template.js\";\n\n/** 主配置默认值（dataRoot 为当前解析的数据根 = 项目根/.napuketto）。 */\nexport function defaultCliConfig(dataRoot: string): CliConfig {\n    return {\n        dataDir: dataRoot,\n        autoRestart: true,\n        restartDelayMs: 2000,\n        accounts: [],\n    };\n}\n\n/** 配置文件缺失 → 生成带注释模板（首次启动自动生成默认配置）。 */\nasync function ensureConfigTemplate(path: string): Promise<void> {\n    try {\n        await access(path);\n    } catch {\n        mkdirSync(dirname(path), { recursive: true });\n        await writeFile(path, `${configTemplate()}\\n`, \"utf8\");\n        logger.info({ path }, \"配置文件不存在，已生成默认模板（请编辑 accounts 段填入 QQ 号）\");\n    }\n}\n\n/** 主配置 store（读/写/校验；.toml 后缀 → smol-toml 序列化）。\n * 配置文件在项目根（resolveConfigPath），dataRoot 仅作兜底与 dataDir 默认值。 */\nexport class CliConfigStore extends ConfigBase<CliConfig> {\n    constructor(dataRoot: string) {\n        super({\n            path: resolveConfigPath({ dataRoot }),\n            schema: { parse: parseCliConfig } satisfies ConfigSchema<CliConfig>,\n            defaults: defaultCliConfig(dataRoot),\n        });\n    }\n}\n\n/** 读取主配置（缺失自动落模板；loadCliConfigWithSource 文件分支内部用）。 */\nasync function loadCliConfig(dataRoot: string): Promise<CliConfig> {\n    const store = new CliConfigStore(dataRoot);\n    await ensureConfigTemplate(store.path);\n    return await store.load();\n}\n\n/** 已加载主配置（含来源；启动路径与 config validate 共用）。 */\nexport interface LoadedCliConfig {\n    config: CliConfig;\n    source: ConfigSource;\n    /** file 来源的配置文件路径；inline 无文件为 undefined。 */\n    path?: string;\n}\n\n/** 生效配置来源（内联优先；只解析来源，不读文件、不落模板）。 */\nexport type ResolvedCliConfigSource =\n    | { source: \"inline\"; text: string }\n    | { source: \"file\"; path: string; dataRoot: string };\n\n/**\n * 解析生效配置来源（loadCliConfigWithSource 与 config validate 无参分支共用）：\n * 内联非空 → inline；否则按 kernel resolveConfigPath 解析文件路径，并带回数据根。\n */\nexport function resolveCliConfigSource(opts: { dataDir?: string } = {}): ResolvedCliConfigSource {\n    const inlineText = readInlineConfigText();\n    if (inlineText !== undefined) {\n        return { source: \"inline\", text: inlineText };\n    }\n    const dataRoot = resolveDataRoot(opts.dataDir);\n    return { source: \"file\", path: resolveConfigPath({ dataRoot }), dataRoot };\n}\n\n/** 「配置来源」日志每进程至多一行（autoStart 与 runSupervisor 各加载一次）。 */\nlet sourceLogged = false;\n\n/**\n * 加载主配置（内联优先，2026-10-25 嵌入式契约）：\n * NAPKETTO_CONFIG_JSON 非空 → 内存文档校验（不读 / 不写 / 不校验任何 toml\n * 文件），打一行来源日志；否则现行文件链路（缺失自动落模板）。校验失败两形态\n * 同为 ConfigError（exit 78），文案区别只在来源标注。\n */\nexport async function loadCliConfigWithSource(\n    opts: { dataDir?: string } = {},\n): Promise<LoadedCliConfig> {\n    const resolved = resolveCliConfigSource(opts);\n    if (resolved.source === \"inline\") {\n        const config = parseInlineConfig(resolved.text);\n        if (!sourceLogged) {\n            sourceLogged = true;\n            logger.info(\"配置来源: inline（NAPKETTO_CONFIG_JSON）\");\n        }\n        return { config, source: \"inline\" };\n    }\n    const config = await loadCliConfig(resolved.dataRoot);\n    return { config, source: \"file\", path: resolved.path };\n}\n","/**\n * cli config 子命令：init / list / apply（P6，2026-08-05；2026-08-07 配置文件移到项目根；\n * 2026-08-08 结构拍板：账号内嵌协议段）\n *\n * **全局单配置文件**：`<项目根>/napuketto.toml`（2026-08-07 用户拍板：配置文件放项目根，\n * 数据仍按数据根组织），本项目所有配置都在里面管理（TOML + smol-toml，配合 zod 校验，\n * 用户 2026-08-05 拍板：JSON 门槛太高）。本机配置不入库（.gitignore）。\n *\n * 2026-08-08 结构（用户拍板）：**一个 QQ 账号一个 [[accounts]] 段，协议与通信配置嵌在\n * 账号内**，账号必填（至少一个，qq 必填）：\n *\n *   # dataDir = \".napuketto\"    # 可选；缺省 = 项目根/.napuketto（跨平台）\n *   autoRestart = true\n *   restartDelayMs = 2000\n *   [[accounts]]\n *   qq = \"123456\"                # QQ 号（必填）\n *   enabled = true\n *   [accounts.onebot11]          # 该账号的 OB11 段（无 = 不启用）\n *   token = \"\"\n *   [[accounts.onebot11.httpServers]]\n *   enabled = true\n *   port = 3000\n *   [accounts.satori]            # 该账号的 Satori 段（无 = 不启用）\n *   [[accounts.satori.httpServers]]\n *   enabled = true\n *   port = 5500\n *\n * 配置文件路径解析见 kernel `resolveConfigPath`（NAPKETTO_CONFIG 显式 > 项目根探测 > 数据根兜底）；\n * 校验器为手写 parse（适配 kernel ConfigBase 的 ConfigSchema 形状）；\n * 协议段由对应协议包的 zod schema 校验（boot 装配时按登录账号 uin 从 accounts 取段作 seed）。\n *\n * 2026-10-25 模块收拢：store/默认值/来源加载移入 config/store.ts，本文件只保留\n * 4 个子命令实现与只读校验。\n */\nimport type { Dirent } from \"node:fs\";\nimport { mkdirSync, readdirSync } from \"node:fs\";\nimport { access, readFile, writeFile } from \"node:fs/promises\";\nimport { dirname, extname, join } from \"node:path\";\nimport process from \"node:process\";\nimport type { ConfigSchema } from \"@napuketto/kernel\";\nimport {\n    ConfigBase,\n    configError,\n    kernelError,\n    parseToml,\n    resolveDataRoot,\n    stringifyToml,\n} from \"@napuketto/kernel\";\nimport { type ConfigSource, parseInlineConfig } from \"../config/inline.js\";\nimport { type CliConfig, parseCliConfig } from \"../config/schema.js\";\nimport { CliConfigStore, defaultCliConfig, resolveCliConfigSource } from \"../config/store.js\";\nimport { configTemplate } from \"../config/template.js\";\nimport { logger } from \"../logger.js\";\n\n/** CliConfig → 普通对象（smol-toml stringify 入参）。 */\nfunction toRecord(config: CliConfig): Record<string, unknown> {\n    return config as unknown as Record<string, unknown>;\n}\n\n/** config init：生成全局 TOML 配置文件（项目根）+ 数据根目录。\n * 文件不存在 → 写带注释模板；已存在 → 跳过（不覆盖用户配置）。\n * 输出原始模板内容（账号未填时解析会校验失败，init 只负责生成不校验）。 */\nexport async function cmdConfigInit(opts: { dataDir?: string }): Promise<void> {\n    const dataRoot = resolveDataRoot(opts.dataDir);\n    mkdirSync(dataRoot, { recursive: true });\n    const store = new CliConfigStore(dataRoot);\n    let created = false;\n    try {\n        await access(store.path);\n    } catch {\n        mkdirSync(dirname(store.path), { recursive: true });\n        await writeFile(store.path, `${configTemplate()}\\n`, \"utf8\");\n        created = true;\n    }\n    const raw = await readFile(store.path, \"utf8\");\n    logger.info({ dataRoot }, \"数据根\");\n    if (created) {\n        logger.info({ path: store.path }, \"全局配置已生成（请编辑 accounts 段填入 QQ 号）\");\n    } else {\n        logger.info({ path: store.path }, \"全局配置已存在（跳过生成，避免覆盖用户配置）\");\n    }\n    // TOML 内容为功能输出（机器可读），保持原样 stdout，不做日志包装\n    process.stdout.write(raw);\n}\n\n/** config list：列出全局配置与各账号目录。 */\nexport async function cmdConfigList(opts: { dataDir?: string }): Promise<void> {\n    const dataRoot = resolveDataRoot(opts.dataDir);\n    const store = new CliConfigStore(dataRoot);\n    const config = await store.load();\n    logger.info({ dataRoot }, \"数据根\");\n    logger.info({ path: store.path }, \"全局配置\");\n    process.stdout.write(`${stringifyToml(toRecord(config))}\\n`);\n    // 账号目录（数据根下的子目录）\n    let entries: Dirent[];\n    try {\n        entries = readdirSync(dataRoot, { withFileTypes: true });\n    } catch {\n        entries = [];\n    }\n    for (const entry of entries) {\n        if (entry.isDirectory()) {\n            printAccountConfig(entry.name, dataRoot);\n        }\n    }\n}\n\n/** 打印账号 config 目录文件清单。 */\nfunction printAccountConfig(account: string, dataRoot: string): void {\n    const configDir = join(dataRoot, account, \"config\");\n    let files: string[] = [];\n    try {\n        files = readdirSync(configDir).filter((f) => f.endsWith(\".json\") || f.endsWith(\".toml\"));\n    } catch {\n        files = [];\n    }\n    let fileList = \"（未初始化）\";\n    if (files.length > 0) {\n        fileList = files.join(\", \");\n    }\n    // 注意：字段名用 account 而非 name——name 是 pino 保留键（logger name），\n    // 会被 pino-pretty 渲染成 `(name/pid)` 元数据头而非普通字段。\n    logger.info({ account, files: fileList }, \"账号配置\");\n}\n\n/** 解析外部配置文本（按扩展名推断 TOML/JSON）。 */\nfunction parseExternalConfig(file: string, rawText: string): unknown {\n    if (extname(file).toLowerCase() === \".toml\") {\n        return parseToml(rawText);\n    }\n    try {\n        return JSON.parse(rawText) as unknown;\n    } catch {\n        throw kernelError(`外部配置 ${file} 不是合法 JSON`, \"INVALID_PARAM\");\n    }\n}\n\n/** config apply：应用外部配置（顶层覆盖合并后写回全局配置）。 */\nexport async function cmdConfigApply(file: string, opts: { dataDir?: string }): Promise<void> {\n    const dataRoot = resolveDataRoot(opts.dataDir);\n    const store = new CliConfigStore(dataRoot);\n    const existing = await store.load();\n    let rawText: string;\n    try {\n        rawText = await readFile(file, \"utf8\");\n    } catch (err) {\n        let message = String(err);\n        if (err instanceof Error) {\n            const { message: errMessage } = err;\n            message = errMessage;\n        }\n        throw kernelError(`读取外部配置失败 ${file}: ${message}`, \"INVALID_PARAM\", { cause: err });\n    }\n    const partial = parseExternalConfig(file, rawText);\n    if (typeof partial !== \"object\" || partial === null) {\n        throw kernelError(\"外部配置必须是对象\", \"INVALID_PARAM\");\n    }\n    const patch = partial as Record<string, unknown>;\n    const merged: Record<string, unknown> = { ...existing, ...patch };\n    const next = parseCliConfig(merged);\n    await store.save(next);\n    logger.info({ path: store.path }, \"全局配置已更新\");\n    // TOML 内容为功能输出（机器可读），保持原样 stdout，不做日志包装\n    process.stdout.write(`${stringifyToml(toRecord(next))}\\n`);\n}\n\n/** 读取配置文件文本（validate 纯只读：ENOENT 不落模板，按「配置缺失」报 ConfigError）。 */\nasync function readConfigTextForValidate(path: string): Promise<string> {\n    try {\n        return await readFile(path, \"utf8\");\n    } catch (err) {\n        if ((err as NodeJS.ErrnoException).code === \"ENOENT\") {\n            throw configError(`配置文件不存在: ${path}`);\n        }\n        throw configError(`读取配置文件失败: ${path}`, { cause: err });\n    }\n}\n\n/**\n * 校验配置文件（与运行时同构：ConfigBase.parseText 反序列化 + 校验，报错文案\n * 含路径且与 loadCliConfig 主路径逐字一致；格式按扩展名推断，同 ConfigBase）。\n */\nasync function validateConfigFile(path: string, dataRoot: string): Promise<void> {\n    const raw = await readConfigTextForValidate(path);\n    const store = new ConfigBase<CliConfig>({\n        path,\n        schema: { parse: parseCliConfig } satisfies ConfigSchema<CliConfig>,\n        defaults: defaultCliConfig(dataRoot),\n    });\n    store.parseText(raw);\n}\n\n/** config validate 选项（--config / --config-json 二选一；无参 = 校验生效配置）。 */\nexport interface ConfigValidateOptions {\n    /** undefined = 未指定（与 --config-json 互斥）。 */\n    configPath?: string | undefined;\n    /** undefined = 未指定（与 --config-path 互斥）。 */\n    configJson?: string | undefined;\n    dataDir?: string;\n}\n\n/** config validate 结果（stdout 单行摘要由 cli/program.ts 渲染；测试断言返回值）。 */\nexport interface ConfigValidateResult {\n    source: ConfigSource;\n    /** file 来源的配置路径（inline 为 undefined）。 */\n    path?: string;\n}\n\n/**\n * config validate：校验配置（exit 0 = 合法；exit 78 = 校验失败，ConfigError 一族；\n * --config 与 --config-json 同给 = 用法错误，exit 1）。纯只读——文件形态不落模板\n * （无参形态文件缺失按配置缺失报 78），不触碰数据目录。\n */\nexport async function cmdConfigValidate(\n    opts: ConfigValidateOptions,\n): Promise<ConfigValidateResult> {\n    const { configPath, configJson } = opts;\n    if (configPath !== undefined && configJson !== undefined) {\n        throw kernelError(\"config validate：--config 与 --config-json 只能二选一\", \"INVALID_PARAM\");\n    }\n    if (configJson !== undefined) {\n        parseInlineConfig(configJson);\n        return { source: \"inline\" };\n    }\n    if (configPath !== undefined) {\n        await validateConfigFile(configPath, resolveDataRoot(opts.dataDir));\n        return { source: \"file\", path: configPath };\n    }\n    // 无参：校验当前生效配置（内联优先；文件缺失按配置缺失报 78，不落模板）\n    const resolved = resolveCliConfigSource(opts);\n    if (resolved.source === \"inline\") {\n        parseInlineConfig(resolved.text);\n        return { source: \"inline\" };\n    }\n    await validateConfigFile(resolved.path, resolved.dataRoot);\n    return { source: \"file\", path: resolved.path };\n}\n","/**\n * state.ts：账号运行时状态文件 + 进程控制原语（2026-09-08 T8）。\n *\n * 跨进程通信选型（决策记录）：现有 IPC 为 stdio JSON 行协议（NAPUTO_IPC=1，\n * koishi 插件专用），supervisor 子进程不在此模式；引入独立通道（socket/pipe）\n * 复杂度高。采用 **PID 状态文件**：supervisor/单账号 boot 启动时把进程信息写\n * `<数据根>/<uin>/runtime.json`，supervisor 自身写 `<数据根>/supervisor.json`；\n * `napuketto status/stop/restart` 读文件 + liveness 检测 + 树杀（win32\n * taskkill /T /F，杀 boot 进程树连带 self-host 孙进程）+ detached 重启。\n */\nimport { type ChildProcess, spawn } from \"node:child_process\";\nimport { mkdirSync, readdirSync, readFileSync, writeFileSync } from \"node:fs\";\nimport { join } from \"node:path\";\nimport process from \"node:process\";\n\n/** 账号运行时状态（runtime.json）。 */\nexport interface AccountRuntime {\n    /** 账号 QQ 号（= 数据目录名）。 */\n    uin: string;\n    /** 宿主引导进程 pid（boot 进程；树杀连带 self-host 孙进程）。 */\n    pid: number;\n    /** self-host 子进程 pid（诊断用，可能缺省）。 */\n    selfHostPid?: number;\n    /** 启动时间（ISO 字符串）。 */\n    startedAt: string;\n    /** 运行形态。 */\n    kind: \"supervisor-child\" | \"single-boot\";\n    /** 状态（写入时快照；读取方用 liveness 修正显示）。 */\n    status: \"running\" | \"exited\";\n    /** 退出码（status=exited 时）。 */\n    exitCode?: number | null;\n    /** supervisor 守护重启次数。 */\n    restartCount?: number;\n}\n\n/** supervisor 运行时状态（supervisor.json）。 */\nexport interface SupervisorRuntime {\n    pid: number;\n    startedAt: string;\n    /** 编排的账号列表。 */\n    accounts: string[];\n}\n\n/** runtime.json 文件名。 */\nconst RUNTIME_FILE = \"runtime.json\";\n/** supervisor.json 文件名。 */\nconst SUPERVISOR_FILE = \"supervisor.json\";\n\n/** 账号状态文件路径。 */\nexport function runtimeStatePath(dataRoot: string, uin: string): string {\n    return join(dataRoot, uin, RUNTIME_FILE);\n}\n\n/** supervisor 状态文件路径。 */\nexport function supervisorStatePath(dataRoot: string): string {\n    return join(dataRoot, SUPERVISOR_FILE);\n}\n\n/** 写账号运行时状态（原子覆盖）。 */\nexport function writeAccountRuntime(dataRoot: string, state: AccountRuntime): void {\n    const path = runtimeStatePath(dataRoot, state.uin);\n    mkdirSync(join(path, \"..\"), { recursive: true });\n    writeFileSync(path, `${JSON.stringify(state, null, 2)}\\n`, \"utf8\");\n}\n\n/** 读账号运行时状态（缺失/损坏返回 null）。 */\nexport function readAccountRuntime(dataRoot: string, uin: string): AccountRuntime | null {\n    return readJson(runtimeStatePath(dataRoot, uin)) as AccountRuntime | null;\n}\n\n/** 写 supervisor 运行时状态。 */\nexport function writeSupervisorRuntime(dataRoot: string, state: SupervisorRuntime): void {\n    writeFileSync(supervisorStatePath(dataRoot), `${JSON.stringify(state, null, 2)}\\n`, \"utf8\");\n}\n\n/** 读 supervisor 运行时状态（缺失返回 null）。 */\nexport function readSupervisorRuntime(dataRoot: string): SupervisorRuntime | null {\n    return readJson(supervisorStatePath(dataRoot)) as SupervisorRuntime | null;\n}\n\n/** 读 JSON 文件（缺失/解析失败返回 null）。 */\nfunction readJson(path: string): unknown {\n    try {\n        return JSON.parse(readFileSync(path, \"utf8\")) as unknown;\n    } catch {\n        return null;\n    }\n}\n\n/** 列出数据根下全部账号运行时状态（扫一级目录 runtime.json）。 */\nexport function listAccountRuntimes(dataRoot: string): AccountRuntime[] {\n    let entries: string[] = [];\n    try {\n        entries = readdirSync(dataRoot, { withFileTypes: true })\n            .filter((e) => e.isDirectory())\n            .map((e) => e.name);\n    } catch {\n        return [];\n    }\n    const out: AccountRuntime[] = [];\n    for (const uin of entries) {\n        const state = readAccountRuntime(dataRoot, uin);\n        if (state !== null) {\n            out.push(state);\n        }\n    }\n    return out;\n}\n\n/** pid 存活检测（signal 0；EPERM 视为存活——进程存在但无权限）。 */\nexport function isPidAlive(pid: number): boolean {\n    if (!Number.isInteger(pid) || pid <= 0) {\n        return false;\n    }\n    try {\n        process.kill(pid, 0);\n        return true;\n    } catch (err) {\n        return (err as NodeJS.ErrnoException).code === \"EPERM\";\n    }\n}\n\n/** 树杀命令构造（win32：taskkill /T /F 连孙进程；posix：kill 信号）。 */\nexport function killProcessTree(pid: number): void {\n    if (process.platform === \"win32\") {\n        spawn(\"taskkill\", [\"/PID\", String(pid), \"/T\", \"/F\"], { stdio: \"ignore\" });\n        return;\n    }\n    try {\n        process.kill(pid, \"SIGTERM\");\n    } catch {\n        // 已退出：无需处理\n    }\n}\n\n/** detached 拉起 node 进程（restart 用；立即返回不等待）。 */\nexport function spawnDetached(args: string[], cwd?: string): ChildProcess {\n    const child = spawn(process.execPath, args, {\n        detached: true,\n        stdio: \"ignore\",\n        ...(cwd !== undefined ? { cwd } : {}),\n    });\n    child.unref();\n    return child;\n}\n\n/** 状态聚合视图（status 命令输出）。 */\nexport interface AccountStatusRow {\n    uin: string;\n    pid: number;\n    /** 文件状态 + liveness 修正后的实际状态。 */\n    alive: boolean;\n    kind: AccountRuntime[\"kind\"];\n    startedAt: string;\n    restartCount: number;\n    exitCode: number | null | undefined;\n}\n\n/** 聚合各账号状态（liveness 修正：文件 running 但 pid 已死 → not running）。 */\nexport function aggregateStatus(\n    runtimes: AccountRuntime[],\n    aliveFn: (pid: number) => boolean = isPidAlive,\n): AccountStatusRow[] {\n    return runtimes.map((r) => ({\n        uin: r.uin,\n        pid: r.pid,\n        alive: r.status === \"running\" ? aliveFn(r.pid) : false,\n        kind: r.kind,\n        startedAt: r.startedAt,\n        restartCount: r.restartCount ?? 0,\n        exitCode: r.exitCode,\n    }));\n}\n","/**\n * ops.ts：status / stop / restart 运维命令实现（2026-09-08 T8）。\n *\n * 数据源：runtime/state 状态文件（supervisor/单账号 boot 写入）+ liveness 检测。\n * stop/restart 语义（2026-10-25 优雅化）：\n *  - stop -q <uin>：写单账号停止哨兵 → 等该账号进程链优雅退出 → 超时树杀兜底。\n *    ⚠️ supervisor 在跑且 autoRestart 时账号会被自动拉起——提示用户先 `napuketto stop`。\n *  - stop（无 -q）：写 all 哨兵（supervisor + 全部账号优雅退出）→ 超时树杀兜底。\n *  - restart：stop 同目标 + detached 重新拉起（-q → 单账号 boot；无 -q →\n *    supervisor autoStart）。\n */\nimport process from \"node:process\";\nimport { removeStopSentinel, writeStopSentinel } from \"@napuketto/loader\";\nimport { logger } from \"../logger.js\";\nimport {\n    type AccountRuntime,\n    aggregateStatus,\n    isPidAlive,\n    killProcessTree,\n    listAccountRuntimes,\n    readSupervisorRuntime,\n    spawnDetached,\n} from \"../runtime/state.js\";\n\n/** 运维命令选项。 */\nexport interface OpsOptions {\n    dataDir?: string;\n    /** 目标账号（stop/restart 指定；status 过滤）。 */\n    qq?: string;\n}\n\n/** 优雅停等待上限（毫秒）：哨兵后子进程链自行退出，超时树杀兜底。 */\nconst GRACEFUL_STOP_WAIT_MS = 8000;\n/** 存活轮询间隔（毫秒）。 */\nconst LIVENESS_POLL_MS = 200;\n\n/** 等待 pid 列表全部退出（返回超时仍未退的 pid）。 */\nasync function waitForPidsExit(pids: number[]): Promise<number[]> {\n    const deadline = Date.now() + GRACEFUL_STOP_WAIT_MS;\n    let alive = pids.filter((pid) => pid > 0 && isPidAlive(pid));\n    while (alive.length > 0 && Date.now() < deadline) {\n        await new Promise((resolve) => setTimeout(resolve, LIVENESS_POLL_MS));\n        alive = alive.filter((pid) => isPidAlive(pid));\n    }\n    return alive;\n}\n\n/** status：聚合输出各账号运行状态（含 supervisor 自身）。 */\nexport function cmdStatus(dataRoot: string, opts: OpsOptions): void {\n    const supervisor = readSupervisorRuntime(dataRoot);\n    if (supervisor !== null) {\n        logger.info(\n            {\n                pid: supervisor.pid,\n                alive: isPidAlive(supervisor.pid),\n                accounts: supervisor.accounts,\n                startedAt: supervisor.startedAt,\n            },\n            \"supervisor\",\n        );\n    } else {\n        logger.info(\"supervisor 未运行（无状态文件）\");\n    }\n    const runtimes = listAccountRuntimes(dataRoot).filter(\n        (r) => opts.qq === undefined || r.uin === opts.qq,\n    );\n    if (runtimes.length === 0) {\n        logger.warn({ dataRoot }, \"没有账号运行时状态（从未启动或数据根不含 runtime.json）\");\n        return;\n    }\n    for (const row of aggregateStatus(runtimes)) {\n        logger.info(\n            {\n                uin: row.uin,\n                alive: row.alive,\n                pid: row.pid,\n                kind: row.kind,\n                startedAt: row.startedAt,\n                restartCount: row.restartCount,\n                ...(row.exitCode !== undefined ? { exitCode: row.exitCode } : {}),\n            },\n            \"账号状态\",\n        );\n    }\n}\n\n/** 树杀目标账号（按 runtime pid）。 */\nfunction stopAccount(runtime: AccountRuntime): void {\n    killProcessTree(runtime.pid);\n    logger.info({ uin: runtime.uin, pid: runtime.pid }, \"已发送停止（树杀）\");\n}\n\n/** stop：-q 停单账号；无 -q 停 supervisor + 全部账号兜底。\n *\n * 2026-10-25 优雅化：先写停止哨兵（目标账号或 all）→ 等进程链自行有序退出\n * （退出码 0）→ 超时残留树杀兜底 → 清理哨兵。单账号哨兵只命中对应 boot/self-host，\n * 不干扰同数据根的其他账号。\n */\n/** stop -q：写单账号哨兵 → 等优雅退出 → 超时树杀兜底 → 清哨兵。 */\nasync function stopSingleAccount(dataRoot: string, target: AccountRuntime): Promise<void> {\n    logger.info({ uin: target.uin, pid: target.pid }, \"已发送停止请求（哨兵），等待退出\");\n    writeStopSentinel(dataRoot, target.uin);\n    const stragglers = await waitForPidsExit([target.pid]);\n    for (const pid of stragglers) {\n        logger.warn({ uin: target.uin, pid }, \"限时内未退出，树杀兜底\");\n        killProcessTree(pid);\n    }\n    removeStopSentinel(dataRoot);\n    const supervisor = readSupervisorRuntime(dataRoot);\n    if (supervisor !== null) {\n        logger.warn(\n            { supervisorPid: supervisor.pid },\n            \"supervisor 仍在运行且 autoRestart 开启时会自动拉起该账号；如需彻底停止请执行 napuketto stop（停 supervisor）\",\n        );\n    }\n}\n\nexport async function cmdStop(dataRoot: string, opts: OpsOptions): Promise<void> {\n    const runtimes = listAccountRuntimes(dataRoot);\n    if (opts.qq !== undefined) {\n        const target = runtimes.find((r) => r.uin === opts.qq);\n        if (target === undefined) {\n            logger.error({ uin: opts.qq }, \"账号无运行时状态（未启动过）\");\n            process.exitCode = 1;\n            return;\n        }\n        await stopSingleAccount(dataRoot, target);\n        return;\n    }\n    const supervisor = readSupervisorRuntime(dataRoot);\n    const supervisorPid = supervisor !== null && isPidAlive(supervisor.pid) ? supervisor.pid : 0;\n    if (supervisor !== null) {\n        logger.info({ pid: supervisor.pid }, \"已发送停止请求（哨兵），等待 supervisor 退出\");\n        writeStopSentinel(dataRoot, \"all\");\n        const alive = await waitForPidsExit([supervisorPid]);\n        for (const pid of alive) {\n            logger.warn({ pid }, \"supervisor 限时内未退出，树杀兜底\");\n            killProcessTree(pid);\n        }\n    } else {\n        logger.warn(\"supervisor 未运行（无状态文件）\");\n    }\n    // 兜底：残留账号进程逐个树杀（哨兵转发失败的场合）\n    const stragglers = await waitForPidsExit(runtimes.map((r) => r.pid));\n    for (const runtime of runtimes) {\n        if (stragglers.includes(runtime.pid)) {\n            stopAccount(runtime);\n        }\n    }\n    removeStopSentinel(dataRoot);\n}\n\n/** restart：stop 同目标 + detached 拉起。 */\nexport async function cmdRestart(dataRoot: string, opts: OpsOptions): Promise<void> {\n    await cmdStop(dataRoot, opts);\n    // 等待进程树退出（实例锁：同账号数据目录单实例，立即拉起会抢锁失败）\n    await new Promise((resolve) => setTimeout(resolve, 1500));\n    const entry = process.argv[1] ?? \"\";\n    const args =\n        opts.qq !== undefined\n            ? [entry, \"-q\", opts.qq, \"--data-dir\", dataRoot]\n            : [entry, \"--data-dir\", dataRoot];\n    spawnDetached(args);\n    logger.info(\n        { args: args.slice(1), qq: opts.qq ?? \"(supervisor 全量)\" },\n        \"已 detached 拉起（日志不再接入当前终端，见数据目录 logs/）\",\n    );\n}\n","/**\n * cli boot：单账号启动序列（2026-08-07 用户拍板：只保留自建宿主）\n *\n * resolveQqFiles（多级来源定位 QQ 原生文件）→ 解析各包 dist 入口 → launchSelfHost\n * （标准 node + stub QQNT.dll 直接 dlopen，不拉起 QQ / 不注入）→ 常驻。\n *\n * QQ 原生文件来源（本机未装 QQ 也能跑，2026-08-16 接入）：\n *   L0 NAPUTO_QQ_FILES 显式文件根 → L1 本机 QQ 安装（--qq-path / NAPUTO_QQ_PATH /\n *      注册表 / 常见路径）→ L2 数据根缓存 <数据根>/qq-files/<版本> → 全部缺失时\n *      自动下载官方安装包（sha256 校验 + 7z 解包 + 提取缓存，幂等）。\n * cached 来源下 qq.qqPath 为语义占位（缓存目录无 QQ.exe）——launchSelfHost 只消费\n * qq.wrapperPath / qq.version（NAPUTO_QQ_PATH 仅注入、self-host 未读取），占位安全。\n *\n * 不写业务逻辑：kernel 装配 + 登录 + 协议装配全部在 self-host.cjs → boot-bootstrap.js 完成。\n * 路线 B（拉起 QQ + 注入）已淘汰（launchQqWithLoader 已移除，cli 只走自建宿主）。\n */\nimport type { ChildProcess } from \"node:child_process\";\nimport path from \"node:path\";\nimport process from \"node:process\";\nimport { createInterface } from \"node:readline\";\nimport { fileURLToPath } from \"node:url\";\nimport { resolveConfigPath, resolveDataRoot } from \"@napuketto/kernel\";\nimport {\n    checkInstanceLock,\n    defaultStubDir,\n    isNativeNoiseLine,\n    type LaunchOptions,\n    type LaunchResult,\n    launchSelfHost,\n    type QqInstallInfo,\n    resolveQqFiles,\n    watchStopSentinel,\n    writeStopSentinel,\n} from \"@napuketto/loader\";\nimport QRCode from \"qrcode\";\nimport { isInlineConfigActive } from \"../config/inline.js\";\nimport { effectiveConsoleEnv, logger, resolveCliLogConfig } from \"../logger.js\";\nimport { writeAccountRuntime } from \"./state.js\";\n\n/** 单账号启动选项。 */\nexport interface BootOptions {\n    /** QQ 号（数据目录账号隔离，ADR-016）。 */\n    qq?: string;\n    /** 数据根目录（缺省环境变量/用户目录）。 */\n    dataDir?: string;\n    /** 覆盖 QQ 安装路径（联调）。 */\n    qqPath?: string;\n    /** stub QQNT.dll 目录（缺省 loader 包内闭源 submodule native/stub-test-env）。 */\n    stubDir?: string;\n}\n\n/** 解析 workspace 包的 dist 入口（ESM 解析：包是 ESM-only，exports 无 require 条件）。 */\nasync function packageEntry(pkg: string): Promise<string> {\n    const url = await import.meta.resolve(pkg);\n    return fileURLToPath(url);\n}\n\n/** QR 透出标记行前缀（loader bootstrap-core 非 IPC 模式输出，cli 解析终端渲染）。 */\nconst QR_LINE_PREFIX = \"NAPUTO_QR \";\n\n/** 优雅停等待上限（毫秒）：超时 kill 兜底（Windows 下为硬杀）。 */\nconst GRACEFUL_STOP_TIMEOUT_MS = 10_000;\n\n/**\n * 逐行转发子进程输出到父进程，过滤原生噪音。\n * readline 按 UTF-8 解码 pipe 字节流，再经 process.stdout（TTY 路径，\n * WriteConsoleW UTF-16）输出——顺带修复 pino 中文在 cmd.exe/管道 936 转码\n * 链路下的乱码（原生 printf 字节流无法从 JS 侧改编码，转 pipe 后统一解码）。\n *\n * NAPUTO_QR 标记行（loader bootstrap-core 输出，QR 登录二维码数据）不转发，\n * 解析后用 qrcode 包渲染终端二维码；png 落盘与 URL 提示由 kernel 日志完成。\n * 噪音判定走 loader 共享单一来源（isNativeNoiseLine，与 koishi IPC 路径同源）。\n */\nfunction forwardFiltered(input: NodeJS.ReadableStream, out: NodeJS.WritableStream): void {\n    const lines = createInterface({ input });\n    lines.on(\"line\", (line) => {\n        if (line.startsWith(QR_LINE_PREFIX)) {\n            renderTerminalQr(line.slice(QR_LINE_PREFIX.length));\n            return;\n        }\n        if (isNativeNoiseLine(line)) {\n            return;\n        }\n        out.write(`${line}\\n`);\n    });\n}\n\n/**\n * 渲染终端二维码（qrcode 包 terminal 模式，half-block 字符）。\n * 解析失败/无 url 时静默丢弃——标记行是内部协议，坏行不影响登录。\n */\nfunction renderTerminalQr(raw: string): void {\n    try {\n        const data = JSON.parse(raw) as { qrcodeUrl?: string };\n        const { qrcodeUrl } = data;\n        if (qrcodeUrl === undefined || qrcodeUrl === \"\") {\n            return;\n        }\n        void QRCode.toString(qrcodeUrl, { type: \"terminal\", small: true })\n            .then((str) => {\n                process.stdout.write(`${str}\\n`);\n            })\n            .catch(() => {\n                // 渲染失败静默（不影响登录，kernel 日志的 URL/png 路径仍可用）\n            });\n    } catch {\n        // 坏行静默丢弃\n    }\n}\n\n/** workspace 包 dist 入口三元组（自建宿主装配面）。 */\ninterface PackageEntries {\n    kernelEntry: string;\n    adapterEntry: string;\n    networkEntry: string;\n}\n\n/** 解析自建宿主装配面的三个包入口（ESM 解析，顺序同旧实现）。 */\nasync function resolvePackageEntries(): Promise<PackageEntries> {\n    return {\n        kernelEntry: await packageEntry(\"@napuketto/kernel\"),\n        adapterEntry: await packageEntry(\"@napuketto/adapter\"),\n        networkEntry: await packageEntry(\"@napuketto/network\"),\n    };\n}\n\n/** stub QQNT.dll 目录（--stub-dir > NAPUTO_STUB_DIR > loader 包内闭源 submodule 默认）。 */\nfunction resolveStubDir(opts: BootOptions): string {\n    return opts.stubDir ?? process.env[\"NAPUTO_STUB_DIR\"] ?? defaultStubDir();\n}\n\n/** 错误文案提取（Error 用 message，其余字符串化——保留旧日志文案语义）。 */\nfunction errorMessage(err: unknown): string {\n    return err instanceof Error ? err.message : String(err);\n}\n\n/** QQ 原生文件多级来源 + 自动下载（本机未装 QQ 时走下载管线）。\n * 失败记录可操作提示并置 exitCode 1，返回 undefined（调用方提前返回）。 */\nasync function locateQqFiles(\n    dataRoot: string,\n    opts: BootOptions,\n): Promise<QqInstallInfo | undefined> {\n    try {\n        return await resolveQqFiles({\n            dataRoot,\n            ...(opts.qqPath !== undefined ? { qqPath: opts.qqPath } : {}),\n        });\n    } catch (err) {\n        logger.error(\n            { err },\n            `定位/下载 QQ 原生文件失败：${errorMessage(err)}\\n` +\n                \"（本机未装 QQ 时自动下载官方安装包；若下载失败请检查网络，或手动安装 QQ、\" +\n                \"设置 NAPUTO_QQ_PATH 指定已有安装、NAPUTO_QQ_FILES 指定文件根、\" +\n                \"NAPUTO_QQ_URL 覆盖下载地址）\",\n        );\n        process.exitCode = 1;\n        return;\n    }\n}\n\n/**\n * 单实例锁预检（2026-08-07 根治「多实例抢数据目录锁挂起」）：同一账号数据\n * 目录只允许一个实例（QQ 原生层 MMKV/登录单例有锁，第二个实例抢不到锁会卡死）。\n * 占用 → 快速失败并提示占用 PID；残留（PID 已死 / PID 被复用，2026-09-10\n * cmdline 校验根治）→ self-host 会自动接管。真正的锁由 self-host 子进程\n * 获取/释放（它才是数据目录的实际持有者），cli 这里只做 spawn 前预检，\n * 给用户友好提示（supervisor 等批量拉起同用）。\n * @returns 可用 true；占用时记录错误并置 exitCode 1 返回 false\n */\nfunction ensureInstanceLockFree(cfgDir: string): boolean {\n    const { occupied, pid: holderPid } = checkInstanceLock(cfgDir);\n    if (!occupied) {\n        return true;\n    }\n    logger.error(\n        { pid: holderPid, dataDir: cfgDir },\n        \"数据目录已被其他实例占用，拒绝启动（同一账号数据目录仅允许一个实例；\" +\n            \"占用校验已含 pid 复用检测，如仍误报请删除该目录下的 instance.lock）\",\n    );\n    process.exitCode = 1;\n    return false;\n}\n\n/** 启动信息走结构化日志（时间戳 + 级别 + pid + 元数据，与 kernel 子进程格式一致）。\n * 2026-10-25 级别重分配：引导细节降 debug（banner 之外的定位/路径细节对运行\n * 状态无信息量），致命错误与登录/退出生命周期保持 info 及以上。 */\nfunction logBootInfo(qq: QqInstallInfo, cfgDir: string): void {\n    logger.debug({ qqVersion: qq.version, qqPath: qq.qqPath, source: qq.source }, \"QQ 文件来源\");\n    logger.debug({ dataDir: cfgDir }, \"数据目录\");\n    logger.debug(\"自建宿主引导（标准 node + stub QQNT.dll）\");\n}\n\n/** 自建宿主启动上下文（参数聚合，避免长参数表）。 */\ninterface SelfHostLaunchContext {\n    opts: BootOptions;\n    qq: QqInstallInfo;\n    cfgDir: string;\n    dataRoot: string;\n    entries: PackageEntries;\n    stubDir: string;\n}\n\n/** launchSelfHost 调用参数构造（唯一启动路径：自建宿主，2026-08-07 用户拍板）。\n * configPath：全局配置文件（项目根 napuketto.toml），注入 NAPKETTO_CONFIG 供装配链读取；\n *   内联配置生效（NAPKETTO_CONFIG_JSON）时不解析、不注入——子进程经 env 继承\n *   内联文本，装配链按同一优先级读取；避免项目根探测出无关路径注入孙进程。\n * extraEnv：传播有效控制台渲染决策（子进程 stdout 恒 pipe，TTY 判定失真）+\n *   数据根（NAPUTO_DATA_ROOT，self-host 停止哨兵目录）。\n * cwd：子进程 cwd 指向数据根——QQ 原生层 fallback 落盘（guild1.db 等）落在专门\n *   的数据目录，不污染项目根（实测 08-07）。 */\nfunction buildLaunchOptions(ctx: SelfHostLaunchContext): LaunchOptions {\n    const { opts, qq, cfgDir, dataRoot, entries, stubDir } = ctx;\n    return {\n        qq,\n        kernelEntry: entries.kernelEntry,\n        adapterEntry: entries.adapterEntry,\n        networkEntry: entries.networkEntry,\n        cfgDir,\n        cwd: dataRoot,\n        ...(isInlineConfigActive() ? {} : { configPath: resolveConfigPath({ dataRoot }) }),\n        selfHost: true,\n        stdio: [\"inherit\", \"pipe\", \"pipe\"],\n        extraEnv: {\n            ...effectiveConsoleEnv(resolveCliLogConfig(opts.dataDir)),\n            NAPUTO_DATA_ROOT: dataRoot,\n        },\n        ...(opts.qq !== undefined ? { quickUin: opts.qq } : {}),\n        stubDir,\n    };\n}\n\n/** 启动自建宿主子进程（包入口解析 → stub 目录 → 启动信息 → launchSelfHost）。\n * ⚠️ P2（2026-08-12）：launchSelfHost 变 async（linux 场景需下载 win-node）。 */\nasync function startSelfHost(\n    opts: BootOptions,\n    qq: QqInstallInfo,\n    cfgDir: string,\n    dataRoot: string,\n): Promise<LaunchResult> {\n    const entries = await resolvePackageEntries();\n    const stubDir = resolveStubDir(opts);\n    logBootInfo(qq, cfgDir);\n    return await launchSelfHost(\n        buildLaunchOptions({ opts, qq, cfgDir, dataRoot, entries, stubDir }),\n    );\n}\n\n/** 接管子进程 stdout/stderr：过滤 MMKV / 符号查找失败等原生噪音，其余转发。 */\nfunction forwardChildOutput(child: ChildProcess): void {\n    if (child.stdout !== null) {\n        forwardFiltered(child.stdout, process.stdout);\n    }\n    if (child.stderr !== null) {\n        forwardFiltered(child.stderr, process.stderr);\n    }\n}\n\n/** 单账号运行时状态落盘（napuketto status/stop 消费，2026-09-08 T8；\n * pid 记 boot 进程——树杀连带 self-host 孙进程）。 */\nfunction recordRuntimeState(\n    dataRoot: string,\n    account: string,\n    child: ChildProcess,\n    status: \"running\" | \"exited\",\n    exitCode?: number | null,\n): void {\n    writeAccountRuntime(dataRoot, {\n        uin: account,\n        pid: process.pid,\n        ...(child.pid !== undefined ? { selfHostPid: child.pid } : {}),\n        startedAt: new Date().toISOString(),\n        kind: \"single-boot\",\n        status,\n        ...(exitCode !== undefined ? { exitCode } : {}),\n    });\n}\n\n/** 优雅关停编排（2026-10-25 生命周期契约）：触发后等 self-host 经自身哨兵/信号\n * 处理自行退出（exit 0），10s 未退则 kill 兜底（Windows 下为硬杀）——\n * boot 进程随后随 child 退出自然返回（退出码 0 = 请求式正常退出）。\n * @returns 「是否已收到停止请求」查询（退出日志 graceful 标注） */\nfunction installGracefulStop(\n    child: ChildProcess,\n    dataRoot: string,\n    account: string,\n): () => boolean {\n    let stopArmed = false;\n    const killIfHung = (): void => {\n        if (child.exitCode !== null || child.killed) {\n            return;\n        }\n        logger.warn({ account }, \"自建宿主未在限时内退出，强制结束\");\n        child.kill();\n    };\n    const armGracefulStop = (reason: string): void => {\n        if (stopArmed) {\n            return;\n        }\n        stopArmed = true;\n        logger.info({ account, reason }, \"收到停止请求，等待自建宿主退出\");\n        const fallback = setTimeout(killIfHung, GRACEFUL_STOP_TIMEOUT_MS);\n        fallback.unref?.();\n    };\n    watchStopSentinel({ dataRoot, account, onTrigger: () => armGracefulStop(\"停止哨兵\") });\n    const onSignal = (signal: string): void => {\n        // 写哨兵覆盖非控制台信号场景（self-host 同目录观察同一文件）；终端\n        // Ctrl+C 下 self-host 也会直接收到 SIGINT，双路径收敛\n        writeStopSentinel(dataRoot, account);\n        armGracefulStop(`信号 ${signal}`);\n    };\n    process.on(\"SIGINT\", () => onSignal(\"SIGINT\"));\n    process.on(\"SIGTERM\", () => onSignal(\"SIGTERM\"));\n    process.on(\"SIGBREAK\", () => onSignal(\"SIGBREAK\"));\n    return () => stopArmed;\n}\n\n/** 常驻：等待自建宿主进程退出（exit / error 两路径均 resolve，去留由 self-host 决定）。 */\nasync function waitSelfHostExit(\n    child: ChildProcess,\n    dataRoot: string,\n    account: string,\n    isStopping: () => boolean,\n): Promise<void> {\n    await new Promise<void>((resolve) => {\n        child.on(\"exit\", (code) => {\n            logger.info({ code, graceful: isStopping() }, \"自建宿主进程退出\");\n            recordRuntimeState(dataRoot, account, child, \"exited\", code);\n            resolve();\n        });\n        child.on(\"error\", (err) => {\n            logger.error({ err }, \"自建宿主进程启动失败\");\n            resolve();\n        });\n    });\n}\n\n/** 启动单个账号（自建宿主 + 常驻）。 */\nexport async function runSingleAccount(opts: BootOptions = {}): Promise<void> {\n    const dataRoot = resolveDataRoot(opts.dataDir);\n    const qq = await locateQqFiles(dataRoot, opts);\n    if (qq === undefined) {\n        return;\n    }\n    const account = opts.qq ?? \"default\";\n    const cfgDir = path.join(dataRoot, account);\n    if (!ensureInstanceLockFree(cfgDir)) {\n        return;\n    }\n    const { child } = await startSelfHost(opts, qq, cfgDir, dataRoot);\n    forwardChildOutput(child);\n    recordRuntimeState(dataRoot, account, child, \"running\");\n    const isStopping = installGracefulStop(child, dataRoot, account);\n    await waitSelfHostExit(child, dataRoot, account, isStopping);\n}\n","/**\n * supervisor：多账号子进程编排（P6，2026-08-05；2026-08-07 自建宿主唯一）\n *\n * 多账号走多进程（ADR-015）：每账号一个独立子进程（node <入口> -q <uin>\n * --data-dir <dataRoot> [--stub-dir <dir>]，复用单账号 runSingleAccount 零改动），\n * 本模块作为父进程：\n *   - 拉起：主配置 accounts（supervisor 子命令）或显式 -q 列表\n *   - 守护：账号异常退出且 autoRestart → 延迟重启\n *   - 信号转发：SIGINT/SIGTERM → 停止全部子进程 → 父进程退出\n */\nimport { type ChildProcess, spawn } from \"node:child_process\";\nimport process from \"node:process\";\nimport { createInterface } from \"node:readline\";\nimport { EXIT_CONFIG_INVALID, resolveDataRoot } from \"@napuketto/kernel\";\nimport { watchStopSentinel, writeStopSentinel } from \"@napuketto/loader\";\nimport {\n    type CliAccountConfig,\n    type CliConfig,\n    DEFAULT_RESTART_DELAY_MS,\n} from \"../config/schema.js\";\nimport { loadCliConfigWithSource } from \"../config/store.js\";\nimport {\n    effectiveConsoleEnv,\n    effectiveConsoleFormat,\n    logger,\n    resolveCliLogConfig,\n} from \"../logger.js\";\nimport { writeAccountRuntime, writeSupervisorRuntime } from \"./state.js\";\n\n/** 退出轮询间隔（毫秒）。 */\nconst EXIT_POLL_MS = 100;\n/** 子进程优雅退出时限（毫秒）：哨兵/信号后子进程自行停止，超时强杀兜底。 */\nconst FORCE_EXIT_MS = 8000;\n\n/** supervisor 选项。 */\nexport interface SupervisorOptions {\n    /** 数据根目录。 */\n    dataDir?: string;\n    /** 显式账号列表（-q A -q B），优先于主配置 accounts。 */\n    qqs?: string[];\n    /** stub QQNT.dll 目录（自建宿主 PATH 前置，透传给子进程 --stub-dir）。 */\n    stubDir?: string;\n}\n\n/** 解析账号列表（显式 -q 优先，否则主配置 accounts 过滤启用项）。 */\nfunction resolveAccounts(opts: SupervisorOptions, config: CliConfig): CliAccountConfig[] {\n    if (opts.qqs !== undefined && opts.qqs.length > 0) {\n        return opts.qqs.map((qq) => ({ qq }));\n    }\n    return config.accounts.filter((acct) => acct.enabled !== false);\n}\n\n/** 解析重启延迟（显式 -q 用默认，主配置场景用配置值）。 */\nfunction resolveRestartDelay(opts: SupervisorOptions, config: CliConfig): number {\n    if (opts.qqs === undefined) {\n        return config.restartDelayMs;\n    }\n    return DEFAULT_RESTART_DELAY_MS;\n}\n\n/** 监督上下文（startAccount / stopAll 共享，避免闭包过长）。 */\ninterface SupervisorCtx {\n    dataRoot: string;\n    entry: string;\n    restartDelayMs: number;\n    autoRestart: boolean;\n    stubDir?: string;\n    children: Map<string, ChildProcess>;\n    /** 每账号守护重启计数（写 runtime.json 用）。 */\n    restartCounts: Map<string, number>;\n    /** 子进程追加 env（NO_BANNER + 渲染决策传播）。 */\n    childEnv: Record<string, string>;\n    /** pretty 模式才加 [uin] 前缀转发（single-line/json 记录自带 account 字段）。 */\n    prefixEnabled: boolean;\n    isStopping: () => boolean;\n}\n\n/**\n * 子进程输出前缀转发（stdout/stderr 逐行）：pretty 模式加 `[uin] ` 前缀\n * （pino 行结构化保留在行内）；single-line/json 模式记录自身已带结构化\n * account 字段（json 加前缀会破坏逐行 JSON.parse），原样透传。\n */\nfunction forwardPrefixed(\n    stream: NodeJS.ReadableStream | null,\n    uin: string,\n    prefixEnabled: boolean,\n): void {\n    if (stream === null) {\n        return;\n    }\n    const rl = createInterface({ input: stream });\n    rl.on(\"line\", (line) => {\n        process.stdout.write(prefixEnabled ? `[${uin}] ${line}\\n` : `${line}\\n`);\n    });\n}\n\n/** 启动一个账号子进程（exit 后按 autoRestart 守护重启）。 */\nfunction startAccount(ctx: SupervisorCtx, acct: CliAccountConfig): void {\n    if (ctx.isStopping()) {\n        return;\n    }\n    const restartCount = ctx.restartCounts.get(acct.qq) ?? 0;\n    // 引导细节（2026-10-25 级别重分配）：账号上线由子进程登录日志报告，此处降 debug\n    logger.debug({ qq: acct.qq, pid: process.pid, restartCount }, \"启动账号\");\n    const args = [ctx.entry, \"-q\", acct.qq, \"--data-dir\", ctx.dataRoot];\n    if (ctx.stubDir !== undefined) {\n        args.push(\"--stub-dir\", ctx.stubDir);\n    }\n    // stdio 管道化（2026-09-08 T8）：逐行前缀转发（多账号输出可辨别），\n    // 替代 inherit——结构化状态（runtime.json：pid/启动时间/重启计数）同步落盘。\n    // env：banner 由 supervisor 统一打（每树至多一次），子进程注入 NO_BANNER；\n    // 渲染决策（format/colorize）按本进程最终控制台形态传播（子进程 stdout 恒 pipe）。\n    const child = spawn(process.execPath, args, {\n        stdio: [\"inherit\", \"pipe\", \"pipe\"],\n        env: {\n            ...process.env,\n            NAPUKETTO_NO_BANNER: \"1\",\n            ...ctx.childEnv,\n        },\n    });\n    forwardPrefixed(child.stdout, acct.qq, ctx.prefixEnabled);\n    forwardPrefixed(child.stderr, acct.qq, ctx.prefixEnabled);\n    ctx.children.set(acct.qq, child);\n    writeAccountRuntime(ctx.dataRoot, {\n        uin: acct.qq,\n        pid: child.pid ?? 0,\n        startedAt: new Date().toISOString(),\n        kind: \"supervisor-child\",\n        status: \"running\",\n        restartCount,\n    });\n    child.on(\"exit\", (code, signal) => {\n        ctx.children.delete(acct.qq);\n        logger.info({ qq: acct.qq, code, signal: signal ?? \"none\" }, \"账号退出\");\n        if (code === EXIT_CONFIG_INVALID) {\n            // 配置校验失败（2026-10-25 退出码契约）：配置不修，重启无意义——\n            // 不进守护重启，落 runtime exited 供 status 消费。\n            logger.error({ qq: acct.qq, code }, \"账号因配置校验失败退出（78），不自动重启\");\n            writeAccountRuntime(ctx.dataRoot, {\n                uin: acct.qq,\n                pid: child.pid ?? 0,\n                startedAt: new Date().toISOString(),\n                kind: \"supervisor-child\",\n                status: \"exited\",\n                exitCode: code,\n                restartCount,\n            });\n            return;\n        }\n        if (!ctx.isStopping() && ctx.autoRestart) {\n            // 守护：延迟重启（关闭信号到达前无限重试，由 SIGINT/SIGTERM 终止）\n            ctx.restartCounts.set(acct.qq, restartCount + 1);\n            setTimeout(() => {\n                startAccount(ctx, acct);\n            }, ctx.restartDelayMs);\n        } else {\n            writeAccountRuntime(ctx.dataRoot, {\n                uin: acct.qq,\n                pid: child.pid ?? 0,\n                startedAt: new Date().toISOString(),\n                kind: \"supervisor-child\",\n                status: \"exited\",\n                exitCode: code,\n                restartCount,\n            });\n        }\n    });\n    child.on(\"error\", (err) => {\n        const { message } = err;\n        logger.error({ qq: acct.qq, err }, `账号启动失败: ${message}`);\n        ctx.children.delete(acct.qq);\n    });\n}\n\n/** 停止全部子进程，全部退出后父进程退出（2026-10-25 优雅化）。\n *\n * 优雅路径：写停止哨兵（all）→ 子进程链（boot / self-host）自行有序退出 →\n * 全部退出后 exit 0（退出码契约：0 = 请求式正常退出）。超时（FORCE_EXIT_MS）\n * 未退的子进程 kill 兜底（Windows 下为硬杀）后仍 exit 0——关停请求本身是正常路径，\n * 与崩溃（非 0）区分是契约的核心目标。\n */\nfunction stopAll(ctx: SupervisorCtx): void {\n    logger.info(\"收到退出信号，停止全部账号\");\n    writeStopSentinel(ctx.dataRoot, \"all\");\n    // 超时兜底：子进程不响应（自建宿主卡死等）时强杀残留，父进程不再死等\n    const forceTimer = setTimeout(() => {\n        for (const child of ctx.children.values()) {\n            child.kill();\n        }\n        process.exit(0);\n    }, FORCE_EXIT_MS);\n    forceTimer.unref?.();\n    const wait = setInterval(() => {\n        if (ctx.children.size === 0) {\n            clearInterval(wait);\n            clearTimeout(forceTimer);\n            process.exit(0);\n        }\n    }, EXIT_POLL_MS);\n}\n\n/** 运行 supervisor（多账号编排）。 */\nexport async function runSupervisor(opts: SupervisorOptions = {}): Promise<void> {\n    const dataRoot = resolveDataRoot(opts.dataDir);\n    // 内联优先（NAPKETTO_CONFIG_JSON > 文件）；校验失败 ConfigError → exit 78\n    const { config } = await loadCliConfigWithSource(\n        opts.dataDir !== undefined ? { dataDir: opts.dataDir } : {},\n    );\n    const accounts = resolveAccounts(opts, config);\n    if (accounts.length === 0) {\n        logger.warn(\"supervisor：没有启用的账号（主配置 accounts 为空或全部禁用）\");\n        return;\n    }\n    const restartDelayMs = resolveRestartDelay(opts, config);\n    const [, entry = \"\"] = process.argv;\n    const children = new Map<string, ChildProcess>();\n    const restartCounts = new Map<string, number>();\n    let stopping = false;\n    // 渲染决策：按本进程最终控制台形态解析（[log] 配置 + TTY），传播给子进程\n    const logCfg = resolveCliLogConfig(opts.dataDir);\n    const ctx: SupervisorCtx = {\n        dataRoot,\n        entry,\n        restartDelayMs,\n        autoRestart: config.autoRestart,\n        ...(opts.stubDir !== undefined ? { stubDir: opts.stubDir } : {}),\n        children,\n        restartCounts,\n        childEnv: effectiveConsoleEnv(logCfg),\n        prefixEnabled: effectiveConsoleFormat(logCfg) === \"pretty\",\n        isStopping: () => stopping,\n    };\n\n    // supervisor 自身状态落盘（napuketto status/stop 消费）\n    writeSupervisorRuntime(dataRoot, {\n        pid: process.pid,\n        startedAt: new Date().toISOString(),\n        accounts: accounts.map((a) => a.qq),\n    });\n\n    for (const acct of accounts) {\n        startAccount(ctx, acct);\n    }\n\n    // 信号转发：停止全部子进程 → 父进程退出。\n    // SIGBREAK = Windows CTRL_BREAK_EVENT（嵌入式宿主 CREATE_NEW_PROCESS_GROUP +\n    // GenerateConsoleCtrlEvent 可优雅停整树）；另接停止哨兵（宿主/脚本写文件即可）。\n    const shutdown = (): void => {\n        if (stopping) {\n            return;\n        }\n        stopping = true;\n        stopAll(ctx);\n    };\n    process.on(\"SIGINT\", shutdown);\n    process.on(\"SIGTERM\", shutdown);\n    process.on(\"SIGBREAK\", shutdown);\n    // supervisor 不持有账号：仅响应 all/空内容哨兵（单账号哨兵由对应 boot/self-host 自行消费）\n    watchStopSentinel({ dataRoot, onTrigger: shutdown });\n\n    // 常驻：直到收到退出信号（stopAll 内 process.exit）\n    await new Promise<void>(() => {\n        // 永不 resolve，由 stopAll 的 process.exit 结束进程\n    });\n}\n","/**\n * 默认动作（无子命令）用例：-q 单账号 / 多 -q supervisor / 无 -q 读配置拉起全部账号。\n *\n * 从 index.ts 拆出（2026-10-25 模块收拢）：这里只做编排，不 import commander；\n * 参数解析、帮助文案与退出码收敛在 cli/program.ts。\n */\nimport { loadCliConfigWithSource } from \"../config/store.js\";\nimport { runSingleAccount } from \"../runtime/boot.js\";\nimport { runSupervisor } from \"../runtime/supervisor.js\";\n\n/** 构造可选 dataDir 参数（exactOptionalPropertyTypes 不允许显式 undefined）。 */\nfunction withDataDir(dataDir: string | undefined): { dataDir?: string } {\n    if (dataDir === undefined) {\n        return {};\n    }\n    return { dataDir };\n}\n\n/** 构造可选 stubDir 参数（同 withDataDir）。 */\nfunction withStubDir(stubDir: string | undefined): { stubDir?: string } {\n    if (stubDir === undefined) {\n        return {};\n    }\n    return { stubDir };\n}\n\n/** 构造可选 qqPath 参数（同 withDataDir）。 */\nfunction withQqPath(qqPath: string | undefined): { qqPath?: string } {\n    if (qqPath === undefined) {\n        return {};\n    }\n    return { qqPath };\n}\n\n/** 主命令已解析参数。 */\nexport interface StartOptions {\n    qq?: string[];\n    dataDir?: string;\n    qqPath?: string;\n    stubDir?: string;\n}\n\n/** 单账号启动分支（-q 单值；构造 bootOptions 后走 runSingleAccount）。 */\nasync function runSingleAccountBranch(opts: StartOptions, qqs: string[]): Promise<void> {\n    const [only] = qqs;\n    if (only === undefined) {\n        return;\n    }\n    await runSingleAccount({\n        qq: only,\n        ...withDataDir(opts.dataDir),\n        ...withQqPath(opts.qqPath),\n        ...withStubDir(opts.stubDir),\n    });\n}\n\n/** 无 -q 时：读全局配置 accounts（账号必填，2026-08-08 拍板），supervisor 拉起全部启用账号。\n * 不再有「配置为空 → 交互式单账号登录」老路径：缺账号直接报错提示编辑模板。\n * 配置加载内联优先（NAPKETTO_CONFIG_JSON > 文件）；校验失败 ConfigError → exit 78。 */\nasync function autoStart(opts: StartOptions): Promise<void> {\n    const { config } = await loadCliConfigWithSource(withDataDir(opts.dataDir));\n    if (config.accounts.length === 0) {\n        // parseCliConfig 已强制至少一个，此处防御\n        throw new Error(\"主配置没有账号，请编辑 napuketto.toml 填写 [[accounts]] 段\");\n    }\n    await runSupervisor({ ...withDataDir(opts.dataDir), ...withStubDir(opts.stubDir) });\n}\n\n/** 主命令分发：无 -q 读配置 supervisor 拉起 / 单 -q 单账号 / 多 -q supervisor。 */\nexport async function dispatchMainAction(opts: StartOptions): Promise<void> {\n    const qqs = opts.qq ?? [];\n    if (qqs.length === 0) {\n        await autoStart(opts);\n        return;\n    }\n    if (qqs.length === 1) {\n        await runSingleAccountBranch(opts, qqs);\n        return;\n    }\n    await runSupervisor({ qqs, ...withDataDir(opts.dataDir), ...withStubDir(opts.stubDir) });\n}\n\n/** supervisor 子命令用例（读主配置 accounts 批量拉起；-d 复用主命令 option）。 */\nexport async function runSupervisorCommand(opts: { dataDir?: string }): Promise<void> {\n    await runSupervisor(withDataDir(opts.dataDir));\n}\n","/**\n * CLI 动作错误出口（2026-10-25 退出码契约）：\n *   0 = 请求式优雅关停（0.2.0 已有，不经此路径）；78 = 配置校验失败\n *   （ConfigError 一族，宿主据此区分「配置未就绪」与运行时崩溃，免重启）；\n *   其余 = 1（运行时崩溃，现状不变）。\n *\n * 退出码只认错误类型（instanceof ConfigError），与日志文案完全解耦——\n * 文案是人读的，退出码是宿主消费的机器契约。\n */\nimport process from \"node:process\";\nimport { ConfigError, EXIT_CONFIG_INVALID } from \"@napuketto/kernel\";\nimport { logger } from \"../logger.js\";\n\n/** 统一错误输出（结构化日志，错误对象经 pino serializer 带堆栈）。 */\nfunction reportError(err: unknown): void {\n    let message = String(err);\n    if (err instanceof Error) {\n        const { message: errMessage } = err;\n        message = errMessage;\n    }\n    logger.error({ err }, message);\n}\n\n/** 统一 catch 出口：打印错误并按类型设置进程退出码（78 = 配置校验失败）。 */\nexport function handleActionError(err: unknown): void {\n    reportError(err);\n    process.exitCode = err instanceof ConfigError ? EXIT_CONFIG_INVALID : 1;\n}\n","/**\n * commander 装配层：全局选项、banner、子命令注册、默认动作分发。\n *\n * 从 index.ts 拆出（2026-10-25 模块收拢）：只做 CLI 契约适配（参数/帮助/输出/\n * 退出码），用例实现见 commands/。禁止在此写业务逻辑。\n */\nimport process from \"node:process\";\nimport { resolveDataRoot } from \"@napuketto/kernel\";\nimport { Command } from \"commander\";\nimport {\n    cmdConfigApply,\n    cmdConfigInit,\n    cmdConfigList,\n    cmdConfigValidate,\n} from \"../commands/config.js\";\nimport { cmdRestart, cmdStatus, cmdStop } from \"../commands/ops.js\";\nimport { dispatchMainAction, runSupervisorCommand } from \"../commands/start.js\";\nimport { resolveCliLogConfig } from \"../logger.js\";\nimport { handleActionError } from \"./error.js\";\n\n/** commander collect：累积 -q 多值。 */\nfunction collectQq(value: string, prev: string[]): string[] {\n    prev.push(value);\n    return prev;\n}\n\n/** 启动字符画（NapukettoQQ 品牌标识，内嵌；art 含反引号/反斜杠，用数组逐行转义）。 */\nconst BANNER = [\n    \"    _   __                  __        __  __        ____  ____ \",\n    \"   / | / /___ _____  __  __/ /_____  / /_/ /_____  / __ \\\\/ __ \\\\\",\n    \"  /  |/ / __ `/ __ \\\\/ / / / //_/ _ \\\\/ __/ __/ __ \\\\/ / / / / / /\",\n    \" / /|  / /_/ / /_/ / /_/ / ,< /  __/ /_/ /_/ /_/ / /_/ / /_/ / \",\n    \"/_/ |_/\\\\__,_/ .___/\\\\__,_/_/|_|\\\\___/\\\\__/\\\\__/\\\\____/\\\\___\\\\_\\\\___\\\\_\\\\ \",\n    \"           /_/                                                 \",\n].join(\"\\n\");\n\n/** 读主命令已解析的 data-dir（-d 定义在主命令，子命令经此共享）。 */\nfunction rootDataDir(program: Command): { dataDir?: string } {\n    const { dataDir } = program.opts<{ dataDir?: string }>();\n    return dataDir === undefined ? {} : { dataDir };\n}\n\n/** 注册 config 子命令（init/list/apply，P6；-d 复用主命令 option）。 */\nfunction registerConfigCommands(program: Command): void {\n    const configCmd = program.command(\"config\").description(\"全局配置管理（napuketto.toml）\");\n    configCmd\n        .command(\"init\")\n        .description(\"生成默认全局配置\")\n        .action(async () => {\n            try {\n                await cmdConfigInit(rootDataDir(program));\n            } catch (err) {\n                handleActionError(err);\n            }\n        });\n    configCmd\n        .command(\"list\")\n        .description(\"列出全局配置与账号配置\")\n        .action(async () => {\n            try {\n                await cmdConfigList(rootDataDir(program));\n            } catch (err) {\n                handleActionError(err);\n            }\n        });\n    configCmd\n        .command(\"apply <file>\")\n        .description(\"应用外部配置（TOML/JSON，校验后写回全局配置）\")\n        .action(async (file: string) => {\n            try {\n                await cmdConfigApply(file, rootDataDir(program));\n            } catch (err) {\n                handleActionError(err);\n            }\n        });\n    // config validate（2026-10-25）：宿主拉起前预检；exit 0 合法 / 78 校验失败\n    // （与运行时同一校验器与错误文案）/ 1 用法错误。纯只读（文件缺失不落模板）。\n    configCmd\n        .command(\"validate\")\n        .description(\n            \"校验配置（--config <path> / --config-json <json> 二选一；无参 = 校验生效配置）\",\n        )\n        .option(\"--config <path>\", \"待校验配置文件路径（.toml/.json 按扩展名解析）\")\n        .option(\"--config-json <json>\", \"待校验内联配置 JSON 文本\")\n        .action(async (opts: { config?: string; configJson?: string }) => {\n            try {\n                const result = await cmdConfigValidate({\n                    configPath: opts.config,\n                    configJson: opts.configJson,\n                    ...rootDataDir(program),\n                });\n                // 校验结果为功能输出（宿主 grep 消费），保持原样 stdout 单行\n                process.stdout.write(\n                    result.source === \"inline\"\n                        ? \"配置校验通过（来源: inline）\\n\"\n                        : `配置校验通过（来源: file ${result.path}）\\n`,\n                );\n            } catch (err) {\n                handleActionError(err);\n            }\n        });\n}\n\n/** 注册 supervisor 子命令（读主配置 accounts 批量拉起，P6；-d 复用主命令 option）。 */\nfunction registerSupervisorCommand(program: Command): void {\n    program\n        .command(\"supervisor\")\n        .description(\"多账号编排（读全局配置 accounts 拉起子进程）\")\n        .action(async () => {\n            try {\n                await runSupervisorCommand(rootDataDir(program));\n            } catch (err) {\n                handleActionError(err);\n            }\n        });\n}\n\n/** 运维子命令公共壳：解析数据根 + 可选 -q 参数，统一 handleActionError 出口。 */\nfunction opsAction(\n    program: Command,\n    run: (dataRoot: string, arg: { qq?: string }) => void | Promise<void>,\n): (opts: { qq?: string }) => Promise<void> {\n    return async (opts) => {\n        try {\n            const dataRoot = resolveDataRoot(rootDataDir(program).dataDir);\n            await run(dataRoot, opts.qq !== undefined ? { qq: opts.qq } : {});\n        } catch (err) {\n            handleActionError(err);\n        }\n    };\n}\n\n/** 注册运维子命令（status/stop/restart，2026-09-08 T8；-q 复用主命令 option）。 */\nfunction registerOpsCommands(program: Command): void {\n    program\n        .command(\"status\")\n        .description(\"查看各账号运行状态（读 runtime.json + 进程存活检测）\")\n        .option(\"-q, --qq <uin>\", \"只看指定账号\")\n        .action(opsAction(program, (dataRoot, arg) => cmdStatus(dataRoot, arg)));\n    program\n        .command(\"stop\")\n        .description(\n            \"停止账号进程树（无 -q 停 supervisor 全部；-q 停单账号，supervisor 守护时会自动拉起）\",\n        )\n        .option(\"-q, --qq <uin>\", \"目标账号（缺省停 supervisor + 全部账号）\")\n        .action(opsAction(program, (dataRoot, arg) => cmdStop(dataRoot, arg)));\n    program\n        .command(\"restart\")\n        .description(\"重启账号（无 -q 重启 supervisor 全量；-q 重启单账号；detached 拉起）\")\n        .option(\"-q, --qq <uin>\", \"目标账号（缺省重启 supervisor 全量）\")\n        .action(opsAction(program, (dataRoot, arg) => cmdRestart(dataRoot, arg)));\n}\n\n/** 注册主命令 action（-q 单账号 / 多 -q supervisor / 无 -q 读配置 supervisor 拉起）。 */\nfunction registerMainAction(program: Command): void {\n    program.action(\n        async (opts: { qq?: string[]; dataDir?: string; qqPath?: string; stubDir?: string }) => {\n            try {\n                await dispatchMainAction(opts);\n            } catch (err) {\n                handleActionError(err);\n            }\n        },\n    );\n}\n\n/** 入口：注册全部子命令与主命令后解析。 */\nexport function main(): void {\n    const program = new Command();\n    program\n        .name(\"napuketto\")\n        .version(\"0.0.1\")\n        .description(\"NapukettoQQ 机器人框架（OneBot 11 兼容）\");\n\n    program\n        .option(\n            \"-q, --qq <uin>\",\n            \"QQ 号（可重复；多个时 supervisor 拉起多账号子进程）\",\n            collectQq,\n            [],\n        )\n        .option(\"-d, --data-dir <dir>\", \"数据根目录（缺省 <项目根>/.napuketto）\")\n        .option(\"--qq-path <path>\", \"QQ 安装路径（联调覆盖）\")\n        .option(\n            \"--stub-dir <dir>\",\n            \"stub QQNT.dll 目录（自建宿主 PATH 前置，缺省 loader/native/stub-test-env，Git Submodule）\",\n        );\n\n    // 启动字符画（每次 cli 启动、首个 action 前打印；受 [log].banner / NAPUKETTO_NO_BANNER\n    // 控制——supervisor 派生的子进程被注入 NO_BANNER，每树至多一次）。preAction 时机\n    // 才能拿到已解析的 -d 数据根（banner 决策需读对配置文件）。\n    program.hook(\"preAction\", () => {\n        const cfg = resolveCliLogConfig(rootDataDir(program).dataDir);\n        if (cfg.banner) {\n            process.stdout.write(`${BANNER}\\n`);\n        }\n    });\n\n    registerConfigCommands(program);\n    registerSupervisorCommand(program);\n    registerOpsCommands(program);\n    registerMainAction(program);\n\n    program.parse(process.argv);\n}\n","#!/usr/bin/env node\n\n/**\n * @napuketto/cli 入口（P2-6 + P6，2026-08-05；2026-08-07 用户拍板：只保留自建宿主；\n * 2026-08-08 配置结构拍板：账号必填，协议配置嵌在账号内）\n *\n * commander 参数解析：\n *   - 单账号：-q <uin> → runSingleAccount（自建宿主：标准 node + stub QQNT.dll，不拉起 QQ）\n *   - 多账号：-q A -q B 或 supervisor 子命令 → runSupervisor（子进程编排）\n *   - 无 -q：读全局配置 accounts（至少一个，账号必填）→ supervisor 拉起全部启用账号\n *   - config 子命令：init / list / apply / validate（主配置管理）\n *   - 退出码契约（2026-10-25）：0 = 请求式优雅关停；78 = 配置校验失败（ConfigError\n *     一族，宿主消费，免重启）；其余错误 = 1（handleActionError 统一出口）\n *\n * 路线 B（拉起 QQ + 注入）已淘汰（2026-08-07 用户拍板），相关入口已移除。\n *\n * 2026-10-25 模块收拢：本文件只保留进程入口；commander 装配在 cli/program.ts，\n * 用例在 commands/，配置领域在 config/，运行期在 runtime/。\n */\nimport { main } from \"./cli/program.js\";\n\nmain();\n"],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;AAaA,MAAa,4BAA4B,CAAC,UAAU,QAAQ;;AAG5D,MAAM,uBAAuB;;AAE7B,MAAa,2BAA2B;;AAGxC,MAAM,kBAAkB;;AAkCxB,SAAS,qBACL,KACA,KACmC;CACnC,MAAM,UAAU,IAAI;CACpB,IAAI,YAAY,KAAA,GACZ;CAEJ,IAAI,OAAO,YAAY,YAAY,YAAY,MAC3C,MAAM,YAAY,SAAS,IAAI,QAAQ;CAE3C,OAAO;AACX;;;;;;AAOA,SAAS,aAAa,KAAsC;CACxD,IAAI,IAAI,eAAe,KAAA,GACnB,OAAO,gBAAgB;CAE3B,IAAI,OAAO,IAAI,eAAe,YAAY,IAAI,eAAe,IACzD,MAAM,YAAY,sBAAsB;CAE5C,OAAO,IAAI;AACf;;AAGA,SAAS,iBAAiB,KAAuC;CAC7D,IAAI,IAAI,mBAAmB,KAAA,GACvB,OAAO;CAEX,IAAI,OAAO,IAAI,mBAAmB,WAC9B,MAAM,YAAY,wBAAwB;CAE9C,OAAO,IAAI;AACf;;AAGA,SAAS,oBAAoB,KAAsC;CAC/D,IAAI,IAAI,sBAAsB,KAAA,GAC1B,OAAO;CAEX,IACI,OAAO,IAAI,sBAAsB,YACjC,CAAC,OAAO,UAAU,IAAI,iBAAiB,KACvC,IAAI,qBAAqB,GAEzB,MAAM,YAAY,2BAA2B;CAEjD,OAAO,IAAI;AACf;;AAGA,SAAS,cAAc,KAAkD;CACrE,IAAI,IAAI,gBAAgB,KAAA,GACpB,MAAM,YACF,2CACJ;CAEJ,IAAI,CAAC,MAAM,QAAQ,IAAI,WAAW,KAAK,IAAI,WAAW,CAAC,WAAW,GAC9D,MAAM,YACF,mDACJ;CAEJ,MAAM,WAA+B,CAAC;CACtC,KAAK,MAAM,QAAQ,IAAI,aACnB,SAAS,KAAK,aAAa,IAAI,CAAC;CAEpC,OAAO;AACX;;AAGA,SAAS,eAAe,KAAsC;CAC1D,MAAM,KAAK,IAAI;CACf,IAAI,OAAO,OAAO,YAAY,OAAO,IACjC,MAAM,YAAY,cAAc;CAEpC,oBAAoB,EAAE;CACtB,OAAO;AACX;;AAGA,SAAS,oBAAoB,IAAkB;CAC3C,IAAI,CAAC,gBAAgB,KAAK,EAAE,GACxB,MAAM,YAAY,6BAA6B;CAEnD,IAAI,0BAA0B,MAAM,gBAAgB,gBAAgB,EAAE,GAClE,MAAM,YACF,aAAa,GAAG,8BACpB;AAER;;AAGA,SAAS,oBAAoB,KAAuB,SAAwB;CACxE,IAAI,YAAY,KAAA,GACZ;CAEJ,IAAI,OAAO,YAAY,WACnB,MAAM,YAAY,sBAAsB;CAE5C,IAAI,UAAU;AAClB;;AAGA,SAAS,sBAAsB,KAA8B,KAA6B;CACtF,MAAM,WAAW,qBAAqB,KAAK,UAAU;CACrD,IAAI,aAAa,KAAA,GACb,IAAI,WAAW;CAEnB,MAAM,SAAS,qBAAqB,KAAK,QAAQ;CACjD,IAAI,WAAW,KAAA,GACX,IAAI,SAAS;CAEjB,MAAM,UAAU,qBAAqB,KAAK,SAAS;CACnD,IAAI,YAAY,KAAA,GACZ,IAAI,UAAU;CAElB,MAAM,QAAQ,qBAAqB,KAAK,OAAO;CAC/C,IAAI,UAAU,KAAA,GACV,IAAI,QAAQ;AAEpB;;AAGA,SAAS,aAAa,MAAiC;CACnD,IAAI,OAAO,SAAS,YAAY,SAAS,MACrC,MAAM,YAAY,sBAAsB;CAE5C,MAAM,MAAM;CACZ,MAAM,MAAwB,EAAE,IAAI,eAAe,GAAG,EAAE;CACxD,oBAAoB,KAAK,IAAI,UAAU;CACvC,sBAAsB,KAAK,GAAG;CAC9B,OAAO;AACX;;;;;AAMA,SAAS,qBAAqB,KAA2B;CACrD,MAAM,EAAE,QAAQ,GAAG,SAAS;CAC5B,OAAO,WAAW,KAAA,IAAY,OAAO;EAAE,GAAG;EAAM;CAAO;AAC3D;;;;;AAMA,SAAS,gBAAgB,OAA2B;CAChD,IAAI;EACA,OAAO,eAAe,KAAK;CAC/B,SAAS,KAAK;EACV,MAAM,SAAS,eAAe,QAAQ,IAAI,UAAU,OAAO,GAAG;EAC9D,MAAM,YAAY,kBAAkB,UAAU,EAAE,OAAO,IAAI,CAAC;CAChE;AACJ;;AAGA,SAAgB,eAAe,OAA2B;CACtD,IAAI,OAAO,UAAU,YAAY,UAAU,MACvC,MAAM,YAAY,UAAU;CAEhC,MAAM,MAAM;CACZ,MAAM,UAAU,aAAa,GAAG;CAChC,MAAM,cAAc,iBAAiB,GAAG;CACxC,MAAM,iBAAiB,oBAAoB,GAAG;CAC9C,MAAM,WAAW,cAAc,GAAG;CAElC,MAAM,MACF,IAAI,WAAW,KAAA,IAAY,qBAAqB,gBAAgB,IAAI,MAAM,CAAC,IAAI,KAAA;CACnF,OAAO;EACH;EACA;EACA;EACA;EACA,GAAI,QAAQ,KAAA,IAAY,EAAE,IAAI,IAAI,CAAC;CACvC;AACJ;;;;;;;;;;;;;;;;;;;;;;;ACpNA,MAAM,oBAAoB;;;;AAQ1B,SAAgB,uBAA2C;CACvD,MAAM,MAAM,QAAQ,IAAI;CACxB,IAAI,QAAQ,KAAA,KAAa,IAAI,KAAK,MAAM,IACpC;CAEJ,OAAO;AACX;;AAGA,SAAgB,uBAAgC;CAC5C,OAAO,qBAAqB,MAAM,KAAA;AACtC;;AAGA,SAAS,eAAe,OAAqD;CACzE,IAAI,OAAO,UAAU,YAAY,UAAU,QAAQ,MAAM,QAAQ,KAAK,GAClE;CAEJ,OAAO;AACX;;;;;AAMA,SAAS,sBAA2D;CAChE,MAAM,OAAO,qBAAqB;CAClC,IAAI,SAAS,KAAA,GACT;CAEJ,IAAI;EACA,OAAO,eAAe,KAAK,MAAM,IAAI,CAAY;CACrD,QAAQ;EACJ;CACJ;AACJ;;AAGA,SAAgB,wBAAwB,KAAsB;CAC1D,MAAM,MAAM,oBAAoB;CAChC,OAAO,QAAQ,KAAA,IAAY,KAAA,IAAY,IAAI;AAC/C;;AAGA,SAAS,gBAAgB,MAAuC;CAC5D,IAAI;CACJ,IAAI;EACA,MAAM,KAAK,MAAM,IAAI;CACzB,SAAS,KAAK;EACV,MAAM,SAAS,eAAe,QAAQ,IAAI,UAAU,OAAO,GAAG;EAC9D,MAAM,YAAY,mBAAmB,UAAU,EAAE,OAAO,IAAI,CAAC;CACjE;CACA,MAAM,SAAS,eAAe,GAAG;CACjC,IAAI,WAAW,KAAA,GACX,MAAM,YAAY,sCAAsC;CAE5D,OAAO;AACX;;;;;AAMA,SAAgB,kBAAkB,MAAyB;CACvD,OAAO,eAAe,gBAAgB,IAAI,CAAC;AAC/C;;;;;;;;;;;;;;;;ACtEA,IAAI,eAAiC;;AAErC,IAAI,iBAAyB,gBAAgB;;;;AAK7C,SAAgB,oBAAoB,SAA6B;CAC7D,IAAI,iBAAiB,MACjB,OAAO;CAEX,iBAAiB,gBAAgB,OAAO;CACxC,IAAI;CACJ,IAAI,qBAAqB,GAErB,UAAU,wBAAwB,KAAK;MAEvC,IAAI;EACA,MAAM,aAAa,kBAAkB,EAAE,UAAU,eAAe,CAAC;EACjE,UAAU,UAAU,aAAa,YAAY,MAAM,CAAC,CAAC,CAAC;CAC1D,QAAQ;EACJ,UAAU,KAAA;CACd;CAEJ,IAAI;EACA,eAAe,eAAe,SAAS,QAAQ,GAAG;CACtD,QAAQ;EAEJ,eAAe,eAAe,KAAA,GAAW,QAAQ,GAAG;CACxD;CACA,OAAO;AACX;;;;;AAMA,SAAgB,uBAAuB,KAA2B;CAC9D,MAAM,QAAQ,QAAQ,OAAO,UAAU;CACvC,OAAO,IAAI,WAAW,QAAQ,WAAW;AAC7C;;;;;;AAOA,SAAgB,oBAAoB,KAAwC;CACxE,MAAM,QAAQ,QAAQ,OAAO,UAAU;CACvC,MAAM,SAAS,uBAAuB,GAAG;CAEzC,OAAO;EACH,sBAAsB;EACtB,wBAHa,IAAI,aAAa,WAAW,YAAY,SAGlB,MAAM;CAC7C;AACJ;;AAGA,SAAS,mBAAmB,MAAsB;CAC9C,OAAO,WAAW,IAAI,IAAI,OAAO,KAAK,gBAAgB,IAAI;AAC9D;;AAgBA,SAAS,iBAAiB,KAAoD;CAC1E,OAAO;EACH,OAAO,IAAI,OAAO,OAAO,IAAI;EAC7B,QAAQ,IAAI;EACZ,WAAW,IAAI;EACf,UAAU,IAAI;EACd,MAAM,IAAI,SAAS,KAAA,IAAY,mBAAmB,IAAI,KAAK,IAAI,IAAI,KAAA;EACnE,WAAW,IAAI,MAAM;EAGrB,MAAM;GAAE,MAAM;GAAO,SAAS;EAAM;CACxC;AACJ;;AAGA,IAAM,gBAAN,MAAyC;CACrC,SAA2B;CAE3B,UAAqB;EACjB,IAAI,KAAK,WAAW,MAChB,KAAK,SAAS,aAAa,iBAAiB,oBAAoB,CAAC,CAAC;EAEtE,OAAO,KAAK;CAChB;CAEA,KAAK,KAAc,KAAoB;EACnC,KAAK,QAAQ,CAAC,CAAC,KAAK,KAAK,GAAG;CAChC;CACA,KAAK,KAAc,KAAoB;EACnC,KAAK,QAAQ,CAAC,CAAC,KAAK,KAAK,GAAG;CAChC;CACA,MAAM,KAAc,KAAoB;EACpC,KAAK,QAAQ,CAAC,CAAC,MAAM,KAAK,GAAG;CACjC;CACA,MAAM,KAAc,KAAoB;EACpC,KAAK,QAAQ,CAAC,CAAC,MAAM,KAAK,GAAG;CACjC;CACA,MAAM,KAAc,KAAoB;EACpC,KAAK,QAAQ,CAAC,CAAC,MAAM,KAAK,GAAG;CACjC;CACA,MAAM,KAAc,KAAoB;EACpC,KAAK,QAAQ,CAAC,CAAC,MAAM,KAAK,GAAG;CACjC;AACJ;;AAGA,MAAa,SAAoB,IAAI,cAAc;;;;;;;;;;;AC3InD,SAAgB,iBAAyB;CACrC,OAAO;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;QAuDH,0BAA0B,GAAG;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;UA0D3B,0BAA0B,GAAG;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AA2CvC;;;;;;;;;;;;ACpJA,SAAgB,iBAAiB,UAA6B;CAC1D,OAAO;EACH,SAAS;EACT,aAAa;EACb,gBAAgB;EAChB,UAAU,CAAC;CACf;AACJ;;AAGA,eAAe,qBAAqB,MAA6B;CAC7D,IAAI;EACA,MAAM,OAAO,IAAI;CACrB,QAAQ;EACJ,UAAU,QAAQ,IAAI,GAAG,EAAE,WAAW,KAAK,CAAC;EAC5C,MAAM,UAAU,MAAM,GAAG,eAAe,EAAE,KAAK,MAAM;EACrD,OAAO,KAAK,EAAE,KAAK,GAAG,wCAAwC;CAClE;AACJ;;;AAIA,IAAa,iBAAb,cAAoC,WAAsB;CACtD,YAAY,UAAkB;EAC1B,MAAM;GACF,MAAM,kBAAkB,EAAE,SAAS,CAAC;GACpC,QAAQ,EAAE,OAAO,eAAe;GAChC,UAAU,iBAAiB,QAAQ;EACvC,CAAC;CACL;AACJ;;AAGA,eAAe,cAAc,UAAsC;CAC/D,MAAM,QAAQ,IAAI,eAAe,QAAQ;CACzC,MAAM,qBAAqB,MAAM,IAAI;CACrC,OAAO,MAAM,MAAM,KAAK;AAC5B;;;;;AAmBA,SAAgB,uBAAuB,OAA6B,CAAC,GAA4B;CAC7F,MAAM,aAAa,qBAAqB;CACxC,IAAI,eAAe,KAAA,GACf,OAAO;EAAE,QAAQ;EAAU,MAAM;CAAW;CAEhD,MAAM,WAAW,gBAAgB,KAAK,OAAO;CAC7C,OAAO;EAAE,QAAQ;EAAQ,MAAM,kBAAkB,EAAE,SAAS,CAAC;EAAG;CAAS;AAC7E;;AAGA,IAAI,eAAe;;;;;;;AAQnB,eAAsB,wBAClB,OAA6B,CAAC,GACN;CACxB,MAAM,WAAW,uBAAuB,IAAI;CAC5C,IAAI,SAAS,WAAW,UAAU;EAC9B,MAAM,SAAS,kBAAkB,SAAS,IAAI;EAC9C,IAAI,CAAC,cAAc;GACf,eAAe;GACf,OAAO,KAAK,oCAAoC;EACpD;EACA,OAAO;GAAE;GAAQ,QAAQ;EAAS;CACtC;CAEA,OAAO;EAAE,QAAA,MADY,cAAc,SAAS,QAAQ;EACnC,QAAQ;EAAQ,MAAM,SAAS;CAAK;AACzD;;;;ACpDA,SAAS,SAAS,QAA4C;CAC1D,OAAO;AACX;;;;AAKA,eAAsB,cAAc,MAA2C;CAC3E,MAAM,WAAW,gBAAgB,KAAK,OAAO;CAC7C,UAAU,UAAU,EAAE,WAAW,KAAK,CAAC;CACvC,MAAM,QAAQ,IAAI,eAAe,QAAQ;CACzC,IAAI,UAAU;CACd,IAAI;EACA,MAAM,OAAO,MAAM,IAAI;CAC3B,QAAQ;EACJ,UAAU,QAAQ,MAAM,IAAI,GAAG,EAAE,WAAW,KAAK,CAAC;EAClD,MAAM,UAAU,MAAM,MAAM,GAAG,eAAe,EAAE,KAAK,MAAM;EAC3D,UAAU;CACd;CACA,MAAM,MAAM,MAAM,SAAS,MAAM,MAAM,MAAM;CAC7C,OAAO,KAAK,EAAE,SAAS,GAAG,KAAK;CAC/B,IAAI,SACA,OAAO,KAAK,EAAE,MAAM,MAAM,KAAK,GAAG,gCAAgC;MAElE,OAAO,KAAK,EAAE,MAAM,MAAM,KAAK,GAAG,wBAAwB;CAG9D,QAAQ,OAAO,MAAM,GAAG;AAC5B;;AAGA,eAAsB,cAAc,MAA2C;CAC3E,MAAM,WAAW,gBAAgB,KAAK,OAAO;CAC7C,MAAM,QAAQ,IAAI,eAAe,QAAQ;CACzC,MAAM,SAAS,MAAM,MAAM,KAAK;CAChC,OAAO,KAAK,EAAE,SAAS,GAAG,KAAK;CAC/B,OAAO,KAAK,EAAE,MAAM,MAAM,KAAK,GAAG,MAAM;CACxC,QAAQ,OAAO,MAAM,GAAG,cAAc,SAAS,MAAM,CAAC,EAAE,GAAG;CAE3D,IAAI;CACJ,IAAI;EACA,UAAU,YAAY,UAAU,EAAE,eAAe,KAAK,CAAC;CAC3D,QAAQ;EACJ,UAAU,CAAC;CACf;CACA,KAAK,MAAM,SAAS,SAChB,IAAI,MAAM,YAAY,GAClB,mBAAmB,MAAM,MAAM,QAAQ;AAGnD;;AAGA,SAAS,mBAAmB,SAAiB,UAAwB;CACjE,MAAM,YAAY,KAAK,UAAU,SAAS,QAAQ;CAClD,IAAI,QAAkB,CAAC;CACvB,IAAI;EACA,QAAQ,YAAY,SAAS,CAAC,CAAC,QAAQ,MAAM,EAAE,SAAS,OAAO,KAAK,EAAE,SAAS,OAAO,CAAC;CAC3F,QAAQ;EACJ,QAAQ,CAAC;CACb;CACA,IAAI,WAAW;CACf,IAAI,MAAM,SAAS,GACf,WAAW,MAAM,KAAK,IAAI;CAI9B,OAAO,KAAK;EAAE;EAAS,OAAO;CAAS,GAAG,MAAM;AACpD;;AAGA,SAAS,oBAAoB,MAAc,SAA0B;CACjE,IAAI,QAAQ,IAAI,CAAC,CAAC,YAAY,MAAM,SAChC,OAAO,UAAU,OAAO;CAE5B,IAAI;EACA,OAAO,KAAK,MAAM,OAAO;CAC7B,QAAQ;EACJ,MAAM,YAAY,QAAQ,KAAK,aAAa,eAAe;CAC/D;AACJ;;AAGA,eAAsB,eAAe,MAAc,MAA2C;CAE1F,MAAM,QAAQ,IAAI,eADD,gBAAgB,KAAK,OACL,CAAQ;CACzC,MAAM,WAAW,MAAM,MAAM,KAAK;CAClC,IAAI;CACJ,IAAI;EACA,UAAU,MAAM,SAAS,MAAM,MAAM;CACzC,SAAS,KAAK;EACV,IAAI,UAAU,OAAO,GAAG;EACxB,IAAI,eAAe,OAAO;GACtB,MAAM,EAAE,SAAS,eAAe;GAChC,UAAU;EACd;EACA,MAAM,YAAY,YAAY,KAAK,IAAI,WAAW,iBAAiB,EAAE,OAAO,IAAI,CAAC;CACrF;CACA,MAAM,UAAU,oBAAoB,MAAM,OAAO;CACjD,IAAI,OAAO,YAAY,YAAY,YAAY,MAC3C,MAAM,YAAY,aAAa,eAAe;CAElD,MAAM,QAAQ;CAEd,MAAM,OAAO,eAAe;EADc,GAAG;EAAU,GAAG;CAC9B,CAAM;CAClC,MAAM,MAAM,KAAK,IAAI;CACrB,OAAO,KAAK,EAAE,MAAM,MAAM,KAAK,GAAG,SAAS;CAE3C,QAAQ,OAAO,MAAM,GAAG,cAAc,SAAS,IAAI,CAAC,EAAE,GAAG;AAC7D;;AAGA,eAAe,0BAA0B,MAA+B;CACpE,IAAI;EACA,OAAO,MAAM,SAAS,MAAM,MAAM;CACtC,SAAS,KAAK;EACV,IAAK,IAA8B,SAAS,UACxC,MAAM,YAAY,YAAY,MAAM;EAExC,MAAM,YAAY,aAAa,QAAQ,EAAE,OAAO,IAAI,CAAC;CACzD;AACJ;;;;;AAMA,eAAe,mBAAmB,MAAc,UAAiC;CAC7E,MAAM,MAAM,MAAM,0BAA0B,IAAI;CAMhD,IALkB,WAAsB;EACpC;EACA,QAAQ,EAAE,OAAO,eAAe;EAChC,UAAU,iBAAiB,QAAQ;CACvC,CACI,CAAC,CAAC,UAAU,GAAG;AACvB;;;;;;AAuBA,eAAsB,kBAClB,MAC6B;CAC7B,MAAM,EAAE,YAAY,eAAe;CACnC,IAAI,eAAe,KAAA,KAAa,eAAe,KAAA,GAC3C,MAAM,YAAY,kDAAkD,eAAe;CAEvF,IAAI,eAAe,KAAA,GAAW;EAC1B,kBAAkB,UAAU;EAC5B,OAAO,EAAE,QAAQ,SAAS;CAC9B;CACA,IAAI,eAAe,KAAA,GAAW;EAC1B,MAAM,mBAAmB,YAAY,gBAAgB,KAAK,OAAO,CAAC;EAClE,OAAO;GAAE,QAAQ;GAAQ,MAAM;EAAW;CAC9C;CAEA,MAAM,WAAW,uBAAuB,IAAI;CAC5C,IAAI,SAAS,WAAW,UAAU;EAC9B,kBAAkB,SAAS,IAAI;EAC/B,OAAO,EAAE,QAAQ,SAAS;CAC9B;CACA,MAAM,mBAAmB,SAAS,MAAM,SAAS,QAAQ;CACzD,OAAO;EAAE,QAAQ;EAAQ,MAAM,SAAS;CAAK;AACjD;;;;;;;;;;;;;;AChMA,MAAM,eAAe;;AAErB,MAAM,kBAAkB;;AAGxB,SAAgB,iBAAiB,UAAkB,KAAqB;CACpE,OAAO,KAAK,UAAU,KAAK,YAAY;AAC3C;;AAGA,SAAgB,oBAAoB,UAA0B;CAC1D,OAAO,KAAK,UAAU,eAAe;AACzC;;AAGA,SAAgB,oBAAoB,UAAkB,OAA6B;CAC/E,MAAM,OAAO,iBAAiB,UAAU,MAAM,GAAG;CACjD,UAAU,KAAK,MAAM,IAAI,GAAG,EAAE,WAAW,KAAK,CAAC;CAC/C,cAAc,MAAM,GAAG,KAAK,UAAU,OAAO,MAAM,CAAC,EAAE,KAAK,MAAM;AACrE;;AAGA,SAAgB,mBAAmB,UAAkB,KAAoC;CACrF,OAAO,SAAS,iBAAiB,UAAU,GAAG,CAAC;AACnD;;AAGA,SAAgB,uBAAuB,UAAkB,OAAgC;CACrF,cAAc,oBAAoB,QAAQ,GAAG,GAAG,KAAK,UAAU,OAAO,MAAM,CAAC,EAAE,KAAK,MAAM;AAC9F;;AAGA,SAAgB,sBAAsB,UAA4C;CAC9E,OAAO,SAAS,oBAAoB,QAAQ,CAAC;AACjD;;AAGA,SAAS,SAAS,MAAuB;CACrC,IAAI;EACA,OAAO,KAAK,MAAM,aAAa,MAAM,MAAM,CAAC;CAChD,QAAQ;EACJ,OAAO;CACX;AACJ;;AAGA,SAAgB,oBAAoB,UAAoC;CACpE,IAAI,UAAoB,CAAC;CACzB,IAAI;EACA,UAAU,YAAY,UAAU,EAAE,eAAe,KAAK,CAAC,CAAC,CACnD,QAAQ,MAAM,EAAE,YAAY,CAAC,CAAC,CAC9B,KAAK,MAAM,EAAE,IAAI;CAC1B,QAAQ;EACJ,OAAO,CAAC;CACZ;CACA,MAAM,MAAwB,CAAC;CAC/B,KAAK,MAAM,OAAO,SAAS;EACvB,MAAM,QAAQ,mBAAmB,UAAU,GAAG;EAC9C,IAAI,UAAU,MACV,IAAI,KAAK,KAAK;CAEtB;CACA,OAAO;AACX;;AAGA,SAAgB,WAAW,KAAsB;CAC7C,IAAI,CAAC,OAAO,UAAU,GAAG,KAAK,OAAO,GACjC,OAAO;CAEX,IAAI;EACA,QAAQ,KAAK,KAAK,CAAC;EACnB,OAAO;CACX,SAAS,KAAK;EACV,OAAQ,IAA8B,SAAS;CACnD;AACJ;;AAGA,SAAgB,gBAAgB,KAAmB;CAC/C,IAAI,QAAQ,aAAa,SAAS;EAC9B,MAAM,YAAY;GAAC;GAAQ,OAAO,GAAG;GAAG;GAAM;EAAI,GAAG,EAAE,OAAO,SAAS,CAAC;EACxE;CACJ;CACA,IAAI;EACA,QAAQ,KAAK,KAAK,SAAS;CAC/B,QAAQ,CAER;AACJ;;AAGA,SAAgB,cAAc,MAAgB,KAA4B;CACtE,MAAM,QAAQ,MAAM,QAAQ,UAAU,MAAM;EACxC,UAAU;EACV,OAAO;EACP,GAAI,QAAQ,KAAA,IAAY,EAAE,IAAI,IAAI,CAAC;CACvC,CAAC;CACD,MAAM,MAAM;CACZ,OAAO;AACX;;AAeA,SAAgB,gBACZ,UACA,UAAoC,YAClB;CAClB,OAAO,SAAS,KAAK,OAAO;EACxB,KAAK,EAAE;EACP,KAAK,EAAE;EACP,OAAO,EAAE,WAAW,YAAY,QAAQ,EAAE,GAAG,IAAI;EACjD,MAAM,EAAE;EACR,WAAW,EAAE;EACb,cAAc,EAAE,gBAAgB;EAChC,UAAU,EAAE;CAChB,EAAE;AACN;;;;;;;;;;;;;;;AC5IA,MAAM,wBAAwB;;AAE9B,MAAM,mBAAmB;;AAGzB,eAAe,gBAAgB,MAAmC;CAC9D,MAAM,WAAW,KAAK,IAAI,IAAI;CAC9B,IAAI,QAAQ,KAAK,QAAQ,QAAQ,MAAM,KAAK,WAAW,GAAG,CAAC;CAC3D,OAAO,MAAM,SAAS,KAAK,KAAK,IAAI,IAAI,UAAU;EAC9C,MAAM,IAAI,SAAS,YAAY,WAAW,SAAS,gBAAgB,CAAC;EACpE,QAAQ,MAAM,QAAQ,QAAQ,WAAW,GAAG,CAAC;CACjD;CACA,OAAO;AACX;;AAGA,SAAgB,UAAU,UAAkB,MAAwB;CAChE,MAAM,aAAa,sBAAsB,QAAQ;CACjD,IAAI,eAAe,MACf,OAAO,KACH;EACI,KAAK,WAAW;EAChB,OAAO,WAAW,WAAW,GAAG;EAChC,UAAU,WAAW;EACrB,WAAW,WAAW;CAC1B,GACA,YACJ;MAEA,OAAO,KAAK,uBAAuB;CAEvC,MAAM,WAAW,oBAAoB,QAAQ,CAAC,CAAC,QAC1C,MAAM,KAAK,OAAO,KAAA,KAAa,EAAE,QAAQ,KAAK,EACnD;CACA,IAAI,SAAS,WAAW,GAAG;EACvB,OAAO,KAAK,EAAE,SAAS,GAAG,oCAAoC;EAC9D;CACJ;CACA,KAAK,MAAM,OAAO,gBAAgB,QAAQ,GACtC,OAAO,KACH;EACI,KAAK,IAAI;EACT,OAAO,IAAI;EACX,KAAK,IAAI;EACT,MAAM,IAAI;EACV,WAAW,IAAI;EACf,cAAc,IAAI;EAClB,GAAI,IAAI,aAAa,KAAA,IAAY,EAAE,UAAU,IAAI,SAAS,IAAI,CAAC;CACnE,GACA,MACJ;AAER;;AAGA,SAAS,YAAY,SAA+B;CAChD,gBAAgB,QAAQ,GAAG;CAC3B,OAAO,KAAK;EAAE,KAAK,QAAQ;EAAK,KAAK,QAAQ;CAAI,GAAG,WAAW;AACnE;;;;;;;;AASA,eAAe,kBAAkB,UAAkB,QAAuC;CACtF,OAAO,KAAK;EAAE,KAAK,OAAO;EAAK,KAAK,OAAO;CAAI,GAAG,kBAAkB;CACpE,kBAAkB,UAAU,OAAO,GAAG;CACtC,MAAM,aAAa,MAAM,gBAAgB,CAAC,OAAO,GAAG,CAAC;CACrD,KAAK,MAAM,OAAO,YAAY;EAC1B,OAAO,KAAK;GAAE,KAAK,OAAO;GAAK;EAAI,GAAG,aAAa;EACnD,gBAAgB,GAAG;CACvB;CACA,mBAAmB,QAAQ;CAC3B,MAAM,aAAa,sBAAsB,QAAQ;CACjD,IAAI,eAAe,MACf,OAAO,KACH,EAAE,eAAe,WAAW,IAAI,GAChC,iFACJ;AAER;AAEA,eAAsB,QAAQ,UAAkB,MAAiC;CAC7E,MAAM,WAAW,oBAAoB,QAAQ;CAC7C,IAAI,KAAK,OAAO,KAAA,GAAW;EACvB,MAAM,SAAS,SAAS,MAAM,MAAM,EAAE,QAAQ,KAAK,EAAE;EACrD,IAAI,WAAW,KAAA,GAAW;GACtB,OAAO,MAAM,EAAE,KAAK,KAAK,GAAG,GAAG,gBAAgB;GAC/C,QAAQ,WAAW;GACnB;EACJ;EACA,MAAM,kBAAkB,UAAU,MAAM;EACxC;CACJ;CACA,MAAM,aAAa,sBAAsB,QAAQ;CACjD,MAAM,gBAAgB,eAAe,QAAQ,WAAW,WAAW,GAAG,IAAI,WAAW,MAAM;CAC3F,IAAI,eAAe,MAAM;EACrB,OAAO,KAAK,EAAE,KAAK,WAAW,IAAI,GAAG,8BAA8B;EACnE,kBAAkB,UAAU,KAAK;EACjC,MAAM,QAAQ,MAAM,gBAAgB,CAAC,aAAa,CAAC;EACnD,KAAK,MAAM,OAAO,OAAO;GACrB,OAAO,KAAK,EAAE,IAAI,GAAG,wBAAwB;GAC7C,gBAAgB,GAAG;EACvB;CACJ,OACI,OAAO,KAAK,uBAAuB;CAGvC,MAAM,aAAa,MAAM,gBAAgB,SAAS,KAAK,MAAM,EAAE,GAAG,CAAC;CACnE,KAAK,MAAM,WAAW,UAClB,IAAI,WAAW,SAAS,QAAQ,GAAG,GAC/B,YAAY,OAAO;CAG3B,mBAAmB,QAAQ;AAC/B;;AAGA,eAAsB,WAAW,UAAkB,MAAiC;CAChF,MAAM,QAAQ,UAAU,IAAI;CAE5B,MAAM,IAAI,SAAS,YAAY,WAAW,SAAS,IAAI,CAAC;CACxD,MAAM,QAAQ,QAAQ,KAAK,MAAM;CACjC,MAAM,OACF,KAAK,OAAO,KAAA,IACN;EAAC;EAAO;EAAM,KAAK;EAAI;EAAc;CAAQ,IAC7C;EAAC;EAAO;EAAc;CAAQ;CACxC,cAAc,IAAI;CAClB,OAAO,KACH;EAAE,MAAM,KAAK,MAAM,CAAC;EAAG,IAAI,KAAK,MAAM;CAAkB,GACxD,uCACJ;AACJ;;;;ACnHA,eAAe,aAAa,KAA8B;CACtD,MAAM,MAAM,MAAM,YAAY,QAAQ,GAAG;CACzC,OAAO,cAAc,GAAG;AAC5B;;AAGA,MAAM,iBAAiB;;AAGvB,MAAM,2BAA2B;;;;;;;;;;;AAYjC,SAAS,gBAAgB,OAA8B,KAAkC;CAErF,gBAD8B,EAAE,MAAM,CAClC,CAAC,CAAC,GAAG,SAAS,SAAS;EACvB,IAAI,KAAK,WAAW,cAAc,GAAG;GACjC,iBAAiB,KAAK,MAAM,EAAqB,CAAC;GAClD;EACJ;EACA,IAAI,kBAAkB,IAAI,GACtB;EAEJ,IAAI,MAAM,GAAG,KAAK,GAAG;CACzB,CAAC;AACL;;;;;AAMA,SAAS,iBAAiB,KAAmB;CACzC,IAAI;EAEA,MAAM,EAAE,cADK,KAAK,MAAM,GACC;EACzB,IAAI,cAAc,KAAA,KAAa,cAAc,IACzC;EAEJ,OAAY,SAAS,WAAW;GAAE,MAAM;GAAY,OAAO;EAAK,CAAC,CAAC,CAC7D,MAAM,QAAQ;GACX,QAAQ,OAAO,MAAM,GAAG,IAAI,GAAG;EACnC,CAAC,CAAC,CACD,YAAY,CAEb,CAAC;CACT,QAAQ,CAER;AACJ;;AAUA,eAAe,wBAAiD;CAC5D,OAAO;EACH,aAAa,MAAM,aAAa,mBAAmB;EACnD,cAAc,MAAM,aAAa,oBAAoB;EACrD,cAAc,MAAM,aAAa,oBAAoB;CACzD;AACJ;;AAGA,SAAS,eAAe,MAA2B;CAC/C,OAAO,KAAK,WAAW,QAAQ,IAAI,sBAAsB,eAAe;AAC5E;;AAGA,SAAS,aAAa,KAAsB;CACxC,OAAO,eAAe,QAAQ,IAAI,UAAU,OAAO,GAAG;AAC1D;;;AAIA,eAAe,cACX,UACA,MACkC;CAClC,IAAI;EACA,OAAO,MAAM,eAAe;GACxB;GACA,GAAI,KAAK,WAAW,KAAA,IAAY,EAAE,QAAQ,KAAK,OAAO,IAAI,CAAC;EAC/D,CAAC;CACL,SAAS,KAAK;EACV,OAAO,MACH,EAAE,IAAI,GACN,mBAAmB,aAAa,GAAG,EAAE,+GAIzC;EACA,QAAQ,WAAW;EACnB;CACJ;AACJ;;;;;;;;;;AAWA,SAAS,uBAAuB,QAAyB;CACrD,MAAM,EAAE,UAAU,KAAK,cAAc,kBAAkB,MAAM;CAC7D,IAAI,CAAC,UACD,OAAO;CAEX,OAAO,MACH;EAAE,KAAK;EAAW,SAAS;CAAO,GAClC,+EAEJ;CACA,QAAQ,WAAW;CACnB,OAAO;AACX;;;;AAKA,SAAS,YAAY,IAAmB,QAAsB;CAC1D,OAAO,MAAM;EAAE,WAAW,GAAG;EAAS,QAAQ,GAAG;EAAQ,QAAQ,GAAG;CAAO,GAAG,SAAS;CACvF,OAAO,MAAM,EAAE,SAAS,OAAO,GAAG,MAAM;CACxC,OAAO,MAAM,iCAAiC;AAClD;;;;;;;;;AAoBA,SAAS,mBAAmB,KAA2C;CACnE,MAAM,EAAE,MAAM,IAAI,QAAQ,UAAU,SAAS,YAAY;CACzD,OAAO;EACH;EACA,aAAa,QAAQ;EACrB,cAAc,QAAQ;EACtB,cAAc,QAAQ;EACtB;EACA,KAAK;EACL,GAAI,qBAAqB,IAAI,CAAC,IAAI,EAAE,YAAY,kBAAkB,EAAE,SAAS,CAAC,EAAE;EAChF,UAAU;EACV,OAAO;GAAC;GAAW;GAAQ;EAAM;EACjC,UAAU;GACN,GAAG,oBAAoB,oBAAoB,KAAK,OAAO,CAAC;GACxD,kBAAkB;EACtB;EACA,GAAI,KAAK,OAAO,KAAA,IAAY,EAAE,UAAU,KAAK,GAAG,IAAI,CAAC;EACrD;CACJ;AACJ;;;AAIA,eAAe,cACX,MACA,IACA,QACA,UACqB;CACrB,MAAM,UAAU,MAAM,sBAAsB;CAC5C,MAAM,UAAU,eAAe,IAAI;CACnC,YAAY,IAAI,MAAM;CACtB,OAAO,MAAM,eACT,mBAAmB;EAAE;EAAM;EAAI;EAAQ;EAAU;EAAS;CAAQ,CAAC,CACvE;AACJ;;AAGA,SAAS,mBAAmB,OAA2B;CACnD,IAAI,MAAM,WAAW,MACjB,gBAAgB,MAAM,QAAQ,QAAQ,MAAM;CAEhD,IAAI,MAAM,WAAW,MACjB,gBAAgB,MAAM,QAAQ,QAAQ,MAAM;AAEpD;;;AAIA,SAAS,mBACL,UACA,SACA,OACA,QACA,UACI;CACJ,oBAAoB,UAAU;EAC1B,KAAK;EACL,KAAK,QAAQ;EACb,GAAI,MAAM,QAAQ,KAAA,IAAY,EAAE,aAAa,MAAM,IAAI,IAAI,CAAC;EAC5D,4BAAW,IAAI,KAAK,EAAA,CAAE,YAAY;EAClC,MAAM;EACN;EACA,GAAI,aAAa,KAAA,IAAY,EAAE,SAAS,IAAI,CAAC;CACjD,CAAC;AACL;;;;;AAMA,SAAS,oBACL,OACA,UACA,SACa;CACb,IAAI,YAAY;CAChB,MAAM,mBAAyB;EAC3B,IAAI,MAAM,aAAa,QAAQ,MAAM,QACjC;EAEJ,OAAO,KAAK,EAAE,QAAQ,GAAG,kBAAkB;EAC3C,MAAM,KAAK;CACf;CACA,MAAM,mBAAmB,WAAyB;EAC9C,IAAI,WACA;EAEJ,YAAY;EACZ,OAAO,KAAK;GAAE;GAAS;EAAO,GAAG,iBAAiB;EAElD,WAD4B,YAAY,wBACjC,CAAC,CAAC,QAAQ;CACrB;CACA,kBAAkB;EAAE;EAAU;EAAS,iBAAiB,gBAAgB,MAAM;CAAE,CAAC;CACjF,MAAM,YAAY,WAAyB;EAGvC,kBAAkB,UAAU,OAAO;EACnC,gBAAgB,MAAM,QAAQ;CAClC;CACA,QAAQ,GAAG,gBAAgB,SAAS,QAAQ,CAAC;CAC7C,QAAQ,GAAG,iBAAiB,SAAS,SAAS,CAAC;CAC/C,QAAQ,GAAG,kBAAkB,SAAS,UAAU,CAAC;CACjD,aAAa;AACjB;;AAGA,eAAe,iBACX,OACA,UACA,SACA,YACa;CACb,MAAM,IAAI,SAAe,YAAY;EACjC,MAAM,GAAG,SAAS,SAAS;GACvB,OAAO,KAAK;IAAE;IAAM,UAAU,WAAW;GAAE,GAAG,UAAU;GACxD,mBAAmB,UAAU,SAAS,OAAO,UAAU,IAAI;GAC3D,QAAQ;EACZ,CAAC;EACD,MAAM,GAAG,UAAU,QAAQ;GACvB,OAAO,MAAM,EAAE,IAAI,GAAG,YAAY;GAClC,QAAQ;EACZ,CAAC;CACL,CAAC;AACL;;AAGA,eAAsB,iBAAiB,OAAoB,CAAC,GAAkB;CAC1E,MAAM,WAAW,gBAAgB,KAAK,OAAO;CAC7C,MAAM,KAAK,MAAM,cAAc,UAAU,IAAI;CAC7C,IAAI,OAAO,KAAA,GACP;CAEJ,MAAM,UAAU,KAAK,MAAM;CAC3B,MAAM,SAAS,KAAK,KAAK,UAAU,OAAO;CAC1C,IAAI,CAAC,uBAAuB,MAAM,GAC9B;CAEJ,MAAM,EAAE,UAAU,MAAM,cAAc,MAAM,IAAI,QAAQ,QAAQ;CAChE,mBAAmB,KAAK;CACxB,mBAAmB,UAAU,SAAS,OAAO,SAAS;CAEtD,MAAM,iBAAiB,OAAO,UAAU,SADrB,oBAAoB,OAAO,UAAU,OACE,CAAC;AAC/D;;;;;;;;;;;;;;ACnUA,MAAM,eAAe;;AAErB,MAAM,gBAAgB;;AAatB,SAAS,gBAAgB,MAAyB,QAAuC;CACrF,IAAI,KAAK,QAAQ,KAAA,KAAa,KAAK,IAAI,SAAS,GAC5C,OAAO,KAAK,IAAI,KAAK,QAAQ,EAAE,GAAG,EAAE;CAExC,OAAO,OAAO,SAAS,QAAQ,SAAS,KAAK,YAAY,KAAK;AAClE;;AAGA,SAAS,oBAAoB,MAAyB,QAA2B;CAC7E,IAAI,KAAK,QAAQ,KAAA,GACb,OAAO,OAAO;CAElB,OAAO;AACX;;;;;;AAwBA,SAAS,gBACL,QACA,KACA,eACI;CACJ,IAAI,WAAW,MACX;CAGJ,gBAD2B,EAAE,OAAO,OAAO,CAC1C,CAAC,CAAC,GAAG,SAAS,SAAS;EACpB,QAAQ,OAAO,MAAM,gBAAgB,IAAI,IAAI,IAAI,KAAK,MAAM,GAAG,KAAK,GAAG;CAC3E,CAAC;AACL;;AAGA,SAAS,aAAa,KAAoB,MAA8B;CACpE,IAAI,IAAI,WAAW,GACf;CAEJ,MAAM,eAAe,IAAI,cAAc,IAAI,KAAK,EAAE,KAAK;CAEvD,OAAO,MAAM;EAAE,IAAI,KAAK;EAAI,KAAK,QAAQ;EAAK;CAAa,GAAG,MAAM;CACpE,MAAM,OAAO;EAAC,IAAI;EAAO;EAAM,KAAK;EAAI;EAAc,IAAI;CAAQ;CAClE,IAAI,IAAI,YAAY,KAAA,GAChB,KAAK,KAAK,cAAc,IAAI,OAAO;CAMvC,MAAM,QAAQ,MAAM,QAAQ,UAAU,MAAM;EACxC,OAAO;GAAC;GAAW;GAAQ;EAAM;EACjC,KAAK;GACD,GAAG,QAAQ;GACX,qBAAqB;GACrB,GAAG,IAAI;EACX;CACJ,CAAC;CACD,gBAAgB,MAAM,QAAQ,KAAK,IAAI,IAAI,aAAa;CACxD,gBAAgB,MAAM,QAAQ,KAAK,IAAI,IAAI,aAAa;CACxD,IAAI,SAAS,IAAI,KAAK,IAAI,KAAK;CAC/B,oBAAoB,IAAI,UAAU;EAC9B,KAAK,KAAK;EACV,KAAK,MAAM,OAAO;EAClB,4BAAW,IAAI,KAAK,EAAA,CAAE,YAAY;EAClC,MAAM;EACN,QAAQ;EACR;CACJ,CAAC;CACD,MAAM,GAAG,SAAS,MAAM,WAAW;EAC/B,IAAI,SAAS,OAAO,KAAK,EAAE;EAC3B,OAAO,KAAK;GAAE,IAAI,KAAK;GAAI;GAAM,QAAQ,UAAU;EAAO,GAAG,MAAM;EACnE,IAAI,SAAS,qBAAqB;GAG9B,OAAO,MAAM;IAAE,IAAI,KAAK;IAAI;GAAK,GAAG,uBAAuB;GAC3D,oBAAoB,IAAI,UAAU;IAC9B,KAAK,KAAK;IACV,KAAK,MAAM,OAAO;IAClB,4BAAW,IAAI,KAAK,EAAA,CAAE,YAAY;IAClC,MAAM;IACN,QAAQ;IACR,UAAU;IACV;GACJ,CAAC;GACD;EACJ;EACA,IAAI,CAAC,IAAI,WAAW,KAAK,IAAI,aAAa;GAEtC,IAAI,cAAc,IAAI,KAAK,IAAI,eAAe,CAAC;GAC/C,iBAAiB;IACb,aAAa,KAAK,IAAI;GAC1B,GAAG,IAAI,cAAc;EACzB,OACI,oBAAoB,IAAI,UAAU;GAC9B,KAAK,KAAK;GACV,KAAK,MAAM,OAAO;GAClB,4BAAW,IAAI,KAAK,EAAA,CAAE,YAAY;GAClC,MAAM;GACN,QAAQ;GACR,UAAU;GACV;EACJ,CAAC;CAET,CAAC;CACD,MAAM,GAAG,UAAU,QAAQ;EACvB,MAAM,EAAE,YAAY;EACpB,OAAO,MAAM;GAAE,IAAI,KAAK;GAAI;EAAI,GAAG,WAAW,SAAS;EACvD,IAAI,SAAS,OAAO,KAAK,EAAE;CAC/B,CAAC;AACL;;;;;;;;AASA,SAAS,QAAQ,KAA0B;CACvC,OAAO,KAAK,eAAe;CAC3B,kBAAkB,IAAI,UAAU,KAAK;CAErC,MAAM,aAAa,iBAAiB;EAChC,KAAK,MAAM,SAAS,IAAI,SAAS,OAAO,GACpC,MAAM,KAAK;EAEf,QAAQ,KAAK,CAAC;CAClB,GAAG,aAAa;CAChB,WAAW,QAAQ;CACnB,MAAM,OAAO,kBAAkB;EAC3B,IAAI,IAAI,SAAS,SAAS,GAAG;GACzB,cAAc,IAAI;GAClB,aAAa,UAAU;GACvB,QAAQ,KAAK,CAAC;EAClB;CACJ,GAAG,YAAY;AACnB;;AAGA,eAAsB,cAAc,OAA0B,CAAC,GAAkB;CAC7E,MAAM,WAAW,gBAAgB,KAAK,OAAO;CAE7C,MAAM,EAAE,WAAW,MAAM,wBACrB,KAAK,YAAY,KAAA,IAAY,EAAE,SAAS,KAAK,QAAQ,IAAI,CAAC,CAC9D;CACA,MAAM,WAAW,gBAAgB,MAAM,MAAM;CAC7C,IAAI,SAAS,WAAW,GAAG;EACvB,OAAO,KAAK,0CAA0C;EACtD;CACJ;CACA,MAAM,iBAAiB,oBAAoB,MAAM,MAAM;CACvD,MAAM,GAAG,QAAQ,MAAM,QAAQ;CAC/B,MAAM,2BAAW,IAAI,IAA0B;CAC/C,MAAM,gCAAgB,IAAI,IAAoB;CAC9C,IAAI,WAAW;CAEf,MAAM,SAAS,oBAAoB,KAAK,OAAO;CAC/C,MAAM,MAAqB;EACvB;EACA;EACA;EACA,aAAa,OAAO;EACpB,GAAI,KAAK,YAAY,KAAA,IAAY,EAAE,SAAS,KAAK,QAAQ,IAAI,CAAC;EAC9D;EACA;EACA,UAAU,oBAAoB,MAAM;EACpC,eAAe,uBAAuB,MAAM,MAAM;EAClD,kBAAkB;CACtB;CAGA,uBAAuB,UAAU;EAC7B,KAAK,QAAQ;EACb,4BAAW,IAAI,KAAK,EAAA,CAAE,YAAY;EAClC,UAAU,SAAS,KAAK,MAAM,EAAE,EAAE;CACtC,CAAC;CAED,KAAK,MAAM,QAAQ,UACf,aAAa,KAAK,IAAI;CAM1B,MAAM,iBAAuB;EACzB,IAAI,UACA;EAEJ,WAAW;EACX,QAAQ,GAAG;CACf;CACA,QAAQ,GAAG,UAAU,QAAQ;CAC7B,QAAQ,GAAG,WAAW,QAAQ;CAC9B,QAAQ,GAAG,YAAY,QAAQ;CAE/B,kBAAkB;EAAE;EAAU,WAAW;CAAS,CAAC;CAGnD,MAAM,IAAI,cAAoB,CAE9B,CAAC;AACL;;;;;;;;;;AC7PA,SAAS,YAAY,SAAmD;CACpE,IAAI,YAAY,KAAA,GACZ,OAAO,CAAC;CAEZ,OAAO,EAAE,QAAQ;AACrB;;AAGA,SAAS,YAAY,SAAmD;CACpE,IAAI,YAAY,KAAA,GACZ,OAAO,CAAC;CAEZ,OAAO,EAAE,QAAQ;AACrB;;AAGA,SAAS,WAAW,QAAiD;CACjE,IAAI,WAAW,KAAA,GACX,OAAO,CAAC;CAEZ,OAAO,EAAE,OAAO;AACpB;;AAWA,eAAe,uBAAuB,MAAoB,KAA8B;CACpF,MAAM,CAAC,QAAQ;CACf,IAAI,SAAS,KAAA,GACT;CAEJ,MAAM,iBAAiB;EACnB,IAAI;EACJ,GAAG,YAAY,KAAK,OAAO;EAC3B,GAAG,WAAW,KAAK,MAAM;EACzB,GAAG,YAAY,KAAK,OAAO;CAC/B,CAAC;AACL;;;;AAKA,eAAe,UAAU,MAAmC;CACxD,MAAM,EAAE,WAAW,MAAM,wBAAwB,YAAY,KAAK,OAAO,CAAC;CAC1E,IAAI,OAAO,SAAS,WAAW,GAE3B,MAAM,IAAI,MAAM,8CAA8C;CAElE,MAAM,cAAc;EAAE,GAAG,YAAY,KAAK,OAAO;EAAG,GAAG,YAAY,KAAK,OAAO;CAAE,CAAC;AACtF;;AAGA,eAAsB,mBAAmB,MAAmC;CACxE,MAAM,MAAM,KAAK,MAAM,CAAC;CACxB,IAAI,IAAI,WAAW,GAAG;EAClB,MAAM,UAAU,IAAI;EACpB;CACJ;CACA,IAAI,IAAI,WAAW,GAAG;EAClB,MAAM,uBAAuB,MAAM,GAAG;EACtC;CACJ;CACA,MAAM,cAAc;EAAE;EAAK,GAAG,YAAY,KAAK,OAAO;EAAG,GAAG,YAAY,KAAK,OAAO;CAAE,CAAC;AAC3F;;AAGA,eAAsB,qBAAqB,MAA2C;CAClF,MAAM,cAAc,YAAY,KAAK,OAAO,CAAC;AACjD;;;;;;;;;;;;;ACvEA,SAAS,YAAY,KAAoB;CACrC,IAAI,UAAU,OAAO,GAAG;CACxB,IAAI,eAAe,OAAO;EACtB,MAAM,EAAE,SAAS,eAAe;EAChC,UAAU;CACd;CACA,OAAO,MAAM,EAAE,IAAI,GAAG,OAAO;AACjC;;AAGA,SAAgB,kBAAkB,KAAoB;CAClD,YAAY,GAAG;CACf,QAAQ,WAAW,eAAe,cAAc,sBAAsB;AAC1E;;;;;;;;;;ACNA,SAAS,UAAU,OAAe,MAA0B;CACxD,KAAK,KAAK,KAAK;CACf,OAAO;AACX;;AAGA,MAAM,SAAS;CACX;CACA;CACA;CACA;CACA;CACA;AACJ,CAAC,CAAC,KAAK,IAAI;;AAGX,SAAS,YAAY,SAAwC;CACzD,MAAM,EAAE,YAAY,QAAQ,KAA2B;CACvD,OAAO,YAAY,KAAA,IAAY,CAAC,IAAI,EAAE,QAAQ;AAClD;;AAGA,SAAS,uBAAuB,SAAwB;CACpD,MAAM,YAAY,QAAQ,QAAQ,QAAQ,CAAC,CAAC,YAAY,wBAAwB;CAChF,UACK,QAAQ,MAAM,CAAC,CACf,YAAY,UAAU,CAAC,CACvB,OAAO,YAAY;EAChB,IAAI;GACA,MAAM,cAAc,YAAY,OAAO,CAAC;EAC5C,SAAS,KAAK;GACV,kBAAkB,GAAG;EACzB;CACJ,CAAC;CACL,UACK,QAAQ,MAAM,CAAC,CACf,YAAY,aAAa,CAAC,CAC1B,OAAO,YAAY;EAChB,IAAI;GACA,MAAM,cAAc,YAAY,OAAO,CAAC;EAC5C,SAAS,KAAK;GACV,kBAAkB,GAAG;EACzB;CACJ,CAAC;CACL,UACK,QAAQ,cAAc,CAAC,CACvB,YAAY,6BAA6B,CAAC,CAC1C,OAAO,OAAO,SAAiB;EAC5B,IAAI;GACA,MAAM,eAAe,MAAM,YAAY,OAAO,CAAC;EACnD,SAAS,KAAK;GACV,kBAAkB,GAAG;EACzB;CACJ,CAAC;CAGL,UACK,QAAQ,UAAU,CAAC,CACnB,YACG,8DACJ,CAAC,CACA,OAAO,mBAAmB,+BAA+B,CAAC,CAC1D,OAAO,wBAAwB,iBAAiB,CAAC,CACjD,OAAO,OAAO,SAAmD;EAC9D,IAAI;GACA,MAAM,SAAS,MAAM,kBAAkB;IACnC,YAAY,KAAK;IACjB,YAAY,KAAK;IACjB,GAAG,YAAY,OAAO;GAC1B,CAAC;GAED,QAAQ,OAAO,MACX,OAAO,WAAW,WACZ,yBACA,mBAAmB,OAAO,KAAK,IACzC;EACJ,SAAS,KAAK;GACV,kBAAkB,GAAG;EACzB;CACJ,CAAC;AACT;;AAGA,SAAS,0BAA0B,SAAwB;CACvD,QACK,QAAQ,YAAY,CAAC,CACrB,YAAY,6BAA6B,CAAC,CAC1C,OAAO,YAAY;EAChB,IAAI;GACA,MAAM,qBAAqB,YAAY,OAAO,CAAC;EACnD,SAAS,KAAK;GACV,kBAAkB,GAAG;EACzB;CACJ,CAAC;AACT;;AAGA,SAAS,UACL,SACA,KACwC;CACxC,OAAO,OAAO,SAAS;EACnB,IAAI;GAEA,MAAM,IADW,gBAAgB,YAAY,OAAO,CAAC,CAAC,OACrC,GAAG,KAAK,OAAO,KAAA,IAAY,EAAE,IAAI,KAAK,GAAG,IAAI,CAAC,CAAC;EACpE,SAAS,KAAK;GACV,kBAAkB,GAAG;EACzB;CACJ;AACJ;;AAGA,SAAS,oBAAoB,SAAwB;CACjD,QACK,QAAQ,QAAQ,CAAC,CACjB,YAAY,oCAAoC,CAAC,CACjD,OAAO,kBAAkB,QAAQ,CAAC,CAClC,OAAO,UAAU,UAAU,UAAU,QAAQ,UAAU,UAAU,GAAG,CAAC,CAAC;CAC3E,QACK,QAAQ,MAAM,CAAC,CACf,YACG,2DACJ,CAAC,CACA,OAAO,kBAAkB,6BAA6B,CAAC,CACvD,OAAO,UAAU,UAAU,UAAU,QAAQ,QAAQ,UAAU,GAAG,CAAC,CAAC;CACzE,QACK,QAAQ,SAAS,CAAC,CAClB,YAAY,kDAAkD,CAAC,CAC/D,OAAO,kBAAkB,0BAA0B,CAAC,CACpD,OAAO,UAAU,UAAU,UAAU,QAAQ,WAAW,UAAU,GAAG,CAAC,CAAC;AAChF;;AAGA,SAAS,mBAAmB,SAAwB;CAChD,QAAQ,OACJ,OAAO,SAAiF;EACpF,IAAI;GACA,MAAM,mBAAmB,IAAI;EACjC,SAAS,KAAK;GACV,kBAAkB,GAAG;EACzB;CACJ,CACJ;AACJ;;AAGA,SAAgB,OAAa;CACzB,MAAM,UAAU,IAAI,QAAQ;CAC5B,QACK,KAAK,WAAW,CAAC,CACjB,QAAQ,OAAO,CAAC,CAChB,YAAY,iCAAiC;CAElD,QACK,OACG,kBACA,qCACA,WACA,CAAC,CACL,CAAC,CACA,OAAO,wBAAwB,4BAA4B,CAAC,CAC5D,OAAO,oBAAoB,eAAe,CAAC,CAC3C,OACG,oBACA,6EACJ;CAKJ,QAAQ,KAAK,mBAAmB;EAE5B,IADY,oBAAoB,YAAY,OAAO,CAAC,CAAC,OAC/C,CAAC,CAAC,QACJ,QAAQ,OAAO,MAAM,GAAG,OAAO,GAAG;CAE1C,CAAC;CAED,uBAAuB,OAAO;CAC9B,0BAA0B,OAAO;CACjC,oBAAoB,OAAO;CAC3B,mBAAmB,OAAO;CAE1B,QAAQ,MAAM,QAAQ,IAAI;AAC9B;;;;;;;;;;;;;;;;;;;;ACvLA,KAAK"}
+{"version":3,"file":"index.mjs","names":[],"sources":["../src/config/schema.ts","../src/config/inline.ts","../src/logger.ts","../src/config/template.ts","../src/config/store.ts","../src/commands/config.ts","../src/runtime/state.ts","../src/commands/ops.ts","../src/runtime/boot.ts","../src/runtime/supervisor.ts","../src/commands/start.ts","../src/cli/error.ts","../src/cli/program.ts","../src/index.ts"],"sourcesContent":["/**\n * 主配置类型与手写校验器（原 config-cmds.ts 拆分，2026-08-08 FTA 优化）\n *\n * 主配置 parse（不引入 zod）：数据根 / 自动重启 / 重启延迟 / 账号列表。\n * 2026-08-08 结构拍板：**一个 QQ 账号一个 [[accounts]] 段，协议与通信配置嵌在\n * 账号内**（[accounts.onebot11] / [accounts.satori]）；账号必填（至少一个）。\n * 协议段为宽松对象，装配时由对应协议包的 zod schema 严格校验。\n * 全部校验错误为 ConfigError（2026-10-25 嵌入式退出码契约：CLI exit 78 一族，\n * 内联与文件两形态共用本校验器）。\n */\nimport { configError, type LogConfig, parseLogConfig, resolveDataRoot } from \"@napuketto/kernel\";\n\n/** 保留占位 QQ 号（模板默认值）：必须替换为真实 QQ 号，否则启动校验报错。 */\nexport const RESERVED_PLACEHOLDER_QINS = [\"123456\", \"654321\"] as const;\n\n/** 默认自动重启。 */\nconst DEFAULT_AUTO_RESTART = true;\n/** 默认重启延迟（毫秒；supervisor 显式 -q 场景复用，避免两处常量漂移）。 */\nexport const DEFAULT_RESTART_DELAY_MS = 2000;\n\n/** QQ 号格式：纯数字 5-11 位（QQ 号合法范围，勿写死 11 位）。 */\nconst QQ_IN_FORMAT_RE = /^\\d{5,11}$/;\n\n/** 协议段键（宽松对象，装配时 zod 严格校验）。 */\ntype ProtocolKey = \"onebot11\" | \"satori\" | \"kurobot\" | \"milky\";\n\n/** 账号配置项（qq 必填；协议段缺省 = 该账号不启用对应协议）。 */\nexport interface CliAccountConfig {\n    qq: string;\n    enabled?: boolean;\n    /** OneBot 11 协议段（与 ob11ConfigSchema 对应，宽松对象，装配时 zod 校验）。 */\n    onebot11?: Record<string, unknown>;\n    /** Satori 协议段（与 satoriConfigSchema 对应，宽松对象，装配时 zod 校验）。 */\n    satori?: Record<string, unknown>;\n    /** Kurobot 协议段（与 kurobotConfigSchema 对应，宽松对象，装配时 zod 校验）。 */\n    kurobot?: Record<string, unknown>;\n    /** Milky 协议段（与 milkyConfigSchema 对应，宽松对象，装配时 zod 校验）。 */\n    milky?: Record<string, unknown>;\n}\n\n/** 主配置（跨账号，全局单文件 TOML）。 */\nexport interface CliConfig {\n    /** 数据根目录（绝对路径）。 */\n    dataDir: string;\n    /** supervisor 是否自动重启崩溃账号。 */\n    autoRestart: boolean;\n    /** 崩溃后重启延迟（毫秒）。 */\n    restartDelayMs: number;\n    /** 账号列表（至少一个，qq 必填）。 */\n    accounts: CliAccountConfig[];\n    /** [log] 日志配置段（kernel parseLogConfig 解析；未配置段时 undefined = 全缺省）。 */\n    log?: LogConfig;\n}\n\n/** 解析账号内协议段（宽松对象，装配时由 zod schema 严格校验）。 */\nfunction parseProtocolSection(\n    raw: Record<string, unknown>,\n    key: ProtocolKey,\n): Record<string, unknown> | undefined {\n    const section = raw[key];\n    if (section === undefined) {\n        return;\n    }\n    if (typeof section !== \"object\" || section === null) {\n        throw configError(`主配置账号 ${key} 段必须是对象`);\n    }\n    return section as Record<string, unknown>;\n}\n\n/**\n * 解析 dataDir（缺省用当前解析的数据根 = 项目根/.napuketto）。\n * 支持绝对路径、\"~/\" 前缀（用户主目录）、相对路径（相对启动目录），\n * 消费端 resolveDataRoot 统一展开为绝对路径。\n */\nfunction parseDataDir(raw: Record<string, unknown>): string {\n    if (raw[\"dataDir\"] === undefined) {\n        return resolveDataRoot();\n    }\n    if (typeof raw[\"dataDir\"] !== \"string\" || raw[\"dataDir\"] === \"\") {\n        throw configError(\"主配置 dataDir 必须是非空字符串\");\n    }\n    return raw[\"dataDir\"];\n}\n\n/** 解析 autoRestart。 */\nfunction parseAutoRestart(raw: Record<string, unknown>): boolean {\n    if (raw[\"autoRestart\"] === undefined) {\n        return DEFAULT_AUTO_RESTART;\n    }\n    if (typeof raw[\"autoRestart\"] !== \"boolean\") {\n        throw configError(\"主配置 autoRestart 必须是布尔值\");\n    }\n    return raw[\"autoRestart\"];\n}\n\n/** 解析 restartDelayMs（毫秒）。 */\nfunction parseRestartDelayMs(raw: Record<string, unknown>): number {\n    if (raw[\"restartDelayMs\"] === undefined) {\n        return DEFAULT_RESTART_DELAY_MS;\n    }\n    if (\n        typeof raw[\"restartDelayMs\"] !== \"number\" ||\n        !Number.isInteger(raw[\"restartDelayMs\"]) ||\n        raw[\"restartDelayMs\"] <= 0\n    ) {\n        throw configError(\"主配置 restartDelayMs 必须是正整数\");\n    }\n    return raw[\"restartDelayMs\"];\n}\n\n/** 解析 accounts（必须至少一个账号，qq 必填）。 */\nfunction parseAccounts(raw: Record<string, unknown>): CliAccountConfig[] {\n    if (raw[\"accounts\"] === undefined) {\n        throw configError(\n            \"主配置缺少 accounts（必须至少一个账号）；首次启动已生成模板，请编辑后重试\",\n        );\n    }\n    if (!Array.isArray(raw[\"accounts\"]) || raw[\"accounts\"].length === 0) {\n        throw configError(\n            \"主配置 accounts 必须是非空数组（至少一个 QQ 账号）；首次启动已生成模板，请编辑后重试\",\n        );\n    }\n    const accounts: CliAccountConfig[] = [];\n    for (const item of raw[\"accounts\"]) {\n        accounts.push(parseAccount(item));\n    }\n    return accounts;\n}\n\n/** 账号 qq 必填校验（非空字符串）。 */\nfunction parseAccountQq(raw: Record<string, unknown>): string {\n    const qq = raw[\"qq\"];\n    if (typeof qq !== \"string\" || qq === \"\") {\n        throw configError(\"主配置账号缺少非空 qq\");\n    }\n    assertValidQqFormat(qq);\n    return qq;\n}\n\n/** qq 格式与占位值校验（5-11 位纯数字；模板占位号显式指路不静默）。 */\nfunction assertValidQqFormat(qq: string): void {\n    if (!QQ_IN_FORMAT_RE.test(qq)) {\n        throw configError(\"主配置账号 qq 必须是 5-11 位纯数字 QQ 号\");\n    }\n    if (RESERVED_PLACEHOLDER_QINS.some((placeholder) => placeholder === qq)) {\n        throw configError(\n            `主配置账号 qq \"${qq}\" 是模板占位值，请编辑配置文件填入真实 QQ 号后再启动`,\n        );\n    }\n}\n\n/** 账号 enabled 可选校验（缺省 = 启用；显式给值必须是布尔）。 */\nfunction applyAccountEnabled(out: CliAccountConfig, enabled: unknown): void {\n    if (enabled === undefined) {\n        return;\n    }\n    if (typeof enabled !== \"boolean\") {\n        throw configError(\"主配置账号 enabled 必须是布尔值\");\n    }\n    out.enabled = enabled;\n}\n\n/** 账号内协议段装配（onebot11/satori/kurobot/milky 缺省 = 不启用该协议）。 */\nfunction applyProtocolSections(raw: Record<string, unknown>, out: CliAccountConfig): void {\n    const onebot11 = parseProtocolSection(raw, \"onebot11\");\n    if (onebot11 !== undefined) {\n        out.onebot11 = onebot11;\n    }\n    const satori = parseProtocolSection(raw, \"satori\");\n    if (satori !== undefined) {\n        out.satori = satori;\n    }\n    const kurobot = parseProtocolSection(raw, \"kurobot\");\n    if (kurobot !== undefined) {\n        out.kurobot = kurobot;\n    }\n    const milky = parseProtocolSection(raw, \"milky\");\n    if (milky !== undefined) {\n        out.milky = milky;\n    }\n}\n\n/** 解析单个账号项（qq 必填；协议段缺省 = 不启用）。 */\nfunction parseAccount(item: unknown): CliAccountConfig {\n    if (typeof item !== \"object\" || item === null) {\n        throw configError(\"主配置 accounts 元素必须是对象\");\n    }\n    const raw = item as Record<string, unknown>;\n    const out: CliAccountConfig = { qq: parseAccountQq(raw) };\n    applyAccountEnabled(out, raw[\"enabled\"]);\n    applyProtocolSections(raw, out);\n    return out;\n}\n\n/**\n * [log] 段落库净化：format 为 undefined（= 按 TTY 自动）时剔除该键，\n * 避免 toml 回写（config list/apply 的 stringifyToml）遇到 undefined 值。\n */\nfunction stripUndefinedFormat(log: LogConfig): LogConfig {\n    const { format, ...rest } = log;\n    return format === undefined ? rest : { ...rest, format };\n}\n\n/**\n * [log] 段解析（kernel parseLogConfig 错误归一为 ConfigError）：日志段非法同属\n * 「配置未就绪」一族（exit 78）；错误文案保持 kernel 原文（主配置 log.xxx ...）。\n */\nfunction parseLogSection(input: unknown): LogConfig {\n    try {\n        return parseLogConfig(input);\n    } catch (err) {\n        const detail = err instanceof Error ? err.message : String(err);\n        throw configError(`主配置 [log] 段非法: ${detail}`, { cause: err });\n    }\n}\n\n/** 手写校验器：主配置 parse（不引入 zod）。全部校验错误为 ConfigError（exit 78 一族）。 */\nexport function parseCliConfig(input: unknown): CliConfig {\n    if (typeof input !== \"object\" || input === null) {\n        throw configError(\"主配置必须是对象\");\n    }\n    const raw = input as Record<string, unknown>;\n    const dataDir = parseDataDir(raw);\n    const autoRestart = parseAutoRestart(raw);\n    const restartDelayMs = parseRestartDelayMs(raw);\n    const accounts = parseAccounts(raw);\n    // [log] 段：kernel parseLogConfig 严格校验（非法值报错；未配置段 = undefined）\n    const log =\n        raw[\"log\"] !== undefined ? stripUndefinedFormat(parseLogSection(raw[\"log\"])) : undefined;\n    return {\n        dataDir,\n        autoRestart,\n        restartDelayMs,\n        accounts,\n        ...(log !== undefined ? { log } : {}),\n    };\n}\n","/**\n * 内联配置（NAPKETTO_CONFIG_JSON，2026-10-25 嵌入式宿主契约）。\n *\n * KuroBridge 等嵌入式宿主每次拉起前整体生成配置，经环境变量喂 JSON 文本\n * （与 napuketto.toml 同构：parseCliConfig 直接吃 JSON.parse 产物），消除托管\n * toml 文件本体。优先级 NAPKETTO_CONFIG_JSON > NAPKETTO_CONFIG > 缺省模板生成；\n * 内联生效时不读 / 不写 / 不校验任何 toml 文件。Windows 单环境变量上限 32767\n * 字符（约 32KB），嵌入式配置形状远小于该限（超限宿主退回文件形态）。\n *\n * 读取口径分两档（有意为之）：\n * - parseInlineConfig：严格，主配置加载 / config validate 用；JSON 解析失败、\n *   非对象、字段校验失败一律 ConfigError（exit 78 一族）。\n * - readInlineConfigDoc / readInlineConfigSection：宽松，logger 读 [log] 段用；\n *   坏文档返回 undefined（日志配置损坏不阻塞启动，严格校验由主配置路径负责）。\n * loader 引导进程另有自己的宽松读取（编译期不静态依赖 kernel），两套不合并。\n *\n * 错误文案指明来源为「内联配置」且不含任何 toml 文件路径。本模块不 import\n * logger（logger.ts 反向依赖本模块判内联来源）。\n */\nimport process from \"node:process\";\nimport { configError } from \"@napuketto/kernel\";\nimport { type CliConfig, parseCliConfig } from \"./schema.js\";\n\n/** 内联配置 env 键（读取为精确键访问；Windows 上 process.env 本身大小写不敏感）。 */\nconst INLINE_CONFIG_ENV = \"NAPKETTO_CONFIG_JSON\";\n\n/** 配置来源。 */\nexport type ConfigSource = \"inline\" | \"file\";\n\n/**\n * 读取内联配置文本（未设置 / 空串 / 纯空白 → undefined，回退文件形态）。\n */\nexport function readInlineConfigText(): string | undefined {\n    const raw = process.env[INLINE_CONFIG_ENV];\n    if (raw === undefined || raw.trim() === \"\") {\n        return undefined;\n    }\n    return raw;\n}\n\n/** 内联是否生效（boot/装配链决定「不碰文件」的判定口径，与 readInlineConfigText 同源）。 */\nexport function isInlineConfigActive(): boolean {\n    return readInlineConfigText() !== undefined;\n}\n\n/** JSON.parse 产物 → 配置对象（数组 / null / 原始值 → undefined）。 */\nfunction asConfigObject(value: unknown): Record<string, unknown> | undefined {\n    if (typeof value !== \"object\" || value === null || Array.isArray(value)) {\n        return undefined;\n    }\n    return value as Record<string, unknown>;\n}\n\n/**\n * 读内联配置文档（宽松口径：未设置 / 空串 / JSON 解析失败 / 非对象 → undefined）。\n * 供日志段等「坏配置不阻塞启动」的消费方使用。\n */\nfunction readInlineConfigDoc(): Record<string, unknown> | undefined {\n    const text = readInlineConfigText();\n    if (text === undefined) {\n        return undefined;\n    }\n    try {\n        return asConfigObject(JSON.parse(text) as unknown);\n    } catch {\n        return undefined;\n    }\n}\n\n/** 读内联配置的单个顶层段（坏文档 → undefined；logger 读 [log] 用）。 */\nexport function readInlineConfigSection(key: string): unknown {\n    const doc = readInlineConfigDoc();\n    return doc === undefined ? undefined : doc[key];\n}\n\n/** 严格解析内联 JSON 对象（主配置校验入口；错误一概 ConfigError）。 */\nfunction parseJsonObject(text: string): Record<string, unknown> {\n    let doc: unknown;\n    try {\n        doc = JSON.parse(text);\n    } catch (err) {\n        const detail = err instanceof Error ? err.message : String(err);\n        throw configError(`内联配置 JSON 解析失败: ${detail}`, { cause: err });\n    }\n    const object = asConfigObject(doc);\n    if (object === undefined) {\n        throw configError(\"内联配置必须是 JSON 对象（与 napuketto.toml 同构）\");\n    }\n    return object;\n}\n\n/**\n * 内联 JSON 文本 → 校验后的主配置。JSON 解析失败 / 非对象 / 字段校验失败\n * 均抛 ConfigError（宿主消费 exit 78，不重试）。\n */\nexport function parseInlineConfig(text: string): CliConfig {\n    return parseCliConfig(parseJsonObject(text));\n}\n","/**\n * cli 进程级 logger（ADR-007 日志规范，2026-08-07 统一改造；2026-10-25 日志可配置化）。\n *\n * 复用 kernel `createLogger`；输出格式/级别/时间戳/颜色由 napuketto.toml [log] 段 +\n * 环境变量决定（kernel parseLogConfig 单一解析源）。懒构造：commander preAction\n * 钩子先 resolveCliLogConfig(dataDir)（banner 决策 + 缓存），首个日志调用时按\n * 缓存配置构造；未初始化时兜底用缺省数据根解析（-d 生效前的极早期日志）。\n *\n * 环境变量（优先级高于 toml，见 kernel parseLogConfig）：NAPUKETTO_LOG_LEVEL /\n * NAPUKETTO_LOG_FORMAT / NAPUKETTO_NO_BANNER / NAPUKETTO_LOG_COLORIZE，\n * 兼容旧拼写 NAPKETTO_LOG_LEVEL。\n */\nimport { readFileSync } from \"node:fs\";\nimport { isAbsolute, join } from \"node:path\";\nimport process from \"node:process\";\nimport {\n    createLogger,\n    type LogConfig,\n    type LogFormat,\n    parseLogConfig,\n    parseToml,\n    resolveConfigPath,\n    resolveDataRoot,\n} from \"@napuketto/kernel\";\nimport { isInlineConfigActive, readInlineConfigSection } from \"./config/inline.js\";\n\n/** 已解析日志配置缓存（preAction 首次解析后固定；-d 后续变化不影响已构造 logger）。 */\nlet cachedConfig: LogConfig | null = null;\n/** 解析配置时用的数据根（[log.file] 相对路径展开基准）。 */\nlet cachedDataRoot: string = resolveDataRoot();\n\n/** 同步解析日志配置（内联 > toml 文件的 [log] 段 + env 覆盖）。损坏/缺失配置回退缺省\n * （不阻塞启动：配置的严格校验由 loadCliConfig 主路径负责报错）。内联生效时不读\n * 任何 toml 文件（嵌入式契约，2026-10-25）。 */\nexport function resolveCliLogConfig(dataDir?: string): LogConfig {\n    if (cachedConfig !== null) {\n        return cachedConfig;\n    }\n    cachedDataRoot = resolveDataRoot(dataDir);\n    let section: unknown;\n    if (isInlineConfigActive()) {\n        // 宽松口径（config/inline 单一实现）：坏内联文档 → undefined，不阻塞日志构造\n        section = readInlineConfigSection(\"log\");\n    } else {\n        try {\n            const configPath = resolveConfigPath({ dataRoot: cachedDataRoot });\n            section = parseToml(readFileSync(configPath, \"utf8\"))[\"log\"];\n        } catch {\n            section = undefined;\n        }\n    }\n    try {\n        cachedConfig = parseLogConfig(section, process.env);\n    } catch {\n        // [log] 段非法：env 覆盖仍生效，缺省兜底（主配置加载路径会给出确切报错）\n        cachedConfig = parseLogConfig(undefined, process.env);\n    }\n    return cachedConfig;\n}\n\n/**\n * 顶层进程的最终控制台格式（[log] format 显式优先，否则按 TTY 自动：\n * 终端 pretty / 管道 single-line）。supervisor 的前缀转发决策同源。\n */\nexport function effectiveConsoleFormat(cfg: LogConfig): LogFormat {\n    const isTty = process.stdout.isTTY === true;\n    return cfg.format ?? (isTty ? \"pretty\" : \"single-line\");\n}\n\n/**\n * 顶层进程的有效控制台渲染决策（传播给子进程）：\n * 子进程 stdout 恒为 pipe（TTY 判定失真），由本进程按最终控制台形态决定\n * format/colorize 并经 env 注入（NAPUKETTO_LOG_FORMAT/NAPUKETTO_LOG_COLORIZE）。\n */\nexport function effectiveConsoleEnv(cfg: LogConfig): Record<string, string> {\n    const isTty = process.stdout.isTTY === true;\n    const format = effectiveConsoleFormat(cfg);\n    const colorize = cfg.colorize ?? (format === \"pretty\" && isTty);\n    return {\n        NAPUKETTO_LOG_FORMAT: format,\n        NAPUKETTO_LOG_COLORIZE: colorize ? \"1\" : \"0\",\n    };\n}\n\n/** [log.file] 相对路径按数据根展开。 */\nfunction resolveLogFilePath(path: string): string {\n    return isAbsolute(path) ? path : join(cachedDataRoot, path);\n}\n\n/**\n * 窄接口注解（避免 TS2883：createLogger 返回 pino.Logger，cli 不直接依赖 pino，\n * declaration emit 无法命名该类型；pino.Logger 结构兼容本接口）。\n */\nexport interface CliLogger {\n    info(obj: unknown, msg?: string): void;\n    warn(obj: unknown, msg?: string): void;\n    error(obj: unknown, msg?: string): void;\n    debug(obj: unknown, msg?: string): void;\n    trace(obj: unknown, msg?: string): void;\n    fatal(obj: unknown, msg?: string): void;\n}\n\n/** cli logger 构造参数（[log] 段折叠；file/fileLevel 成对生效，其余直传 undefined）。 */\nfunction cliLoggerOptions(cfg: LogConfig): Parameters<typeof createLogger>[0] {\n    return {\n        level: cfg.levels.cli ?? cfg.level,\n        format: cfg.format,\n        timestamp: cfg.timestamp,\n        colorize: cfg.colorize,\n        file: cfg.file !== undefined ? resolveLogFilePath(cfg.file.path) : undefined,\n        fileLevel: cfg.file?.level,\n        // name=cli：与 kernel/loader 统一（pretty 渲染 (cli/pid) 头，\n        // json 通道作 module 字段），service 保留作进程来源过滤\n        base: { name: \"cli\", service: \"cli\" },\n    };\n}\n\n/** 懒构造 cli 进程日志（name 渲染为 (cli/pid) 元数据头，文件 JSON 保留 name 字段可过滤）。 */\nclass LazyCliLogger implements CliLogger {\n    #inner: CliLogger | null = null;\n\n    #ensure(): CliLogger {\n        if (this.#inner === null) {\n            this.#inner = createLogger(cliLoggerOptions(resolveCliLogConfig()));\n        }\n        return this.#inner;\n    }\n\n    info(obj: unknown, msg?: string): void {\n        this.#ensure().info(obj, msg);\n    }\n    warn(obj: unknown, msg?: string): void {\n        this.#ensure().warn(obj, msg);\n    }\n    error(obj: unknown, msg?: string): void {\n        this.#ensure().error(obj, msg);\n    }\n    debug(obj: unknown, msg?: string): void {\n        this.#ensure().debug(obj, msg);\n    }\n    trace(obj: unknown, msg?: string): void {\n        this.#ensure().trace(obj, msg);\n    }\n    fatal(obj: unknown, msg?: string): void {\n        this.#ensure().fatal(obj, msg);\n    }\n}\n\n/** cli 进程日志（懒构造，配置见 resolveCliLogConfig）。 */\nexport const logger: CliLogger = new LazyCliLogger();\n","/**\n * 配置模板（TOML 注释版，原 config-cmds.ts 拆分，2026-08-08 FTA 优化）。\n * `config init` 与首次启动（loadCliConfig）缺失时生成。\n *\n * 2026-08-08 结构拍板：**一个 QQ 账号一个 [[accounts]] 段，协议与通信配置嵌在\n * 账号内**（[accounts.onebot11] / [accounts.satori]）；账号必填（至少一个）。\n * dataDir 不再写死（缺省 = 项目根/.napuketto，跨平台），模板保持可移植。\n */\nimport { RESERVED_PLACEHOLDER_QINS } from \"./schema.js\";\n\nexport function configTemplate(): string {\n    return `# ============================================================\n# NapukettoQQ 全局配置文件\n# ============================================================\n# 本文件由 \\`napuketto config init\\` 生成（或首次启动自动生成）。\n# 本机配置不入库（.gitignore）；修改后重启生效。\n#\n# 配置组织：一个 QQ 账号一个 [[accounts]] 段，协议与通信配置嵌在账号内\n# （[accounts.onebot11] / [accounts.satori] / [accounts.kurobot]）。账号没有写\n# 某协议段 = 该账号不启用该协议。账号必填（至少一个，qq 必填）。\n\n# ------------------------------------------------------------\n# 全局配置（跨账号）\n# ------------------------------------------------------------\n\n# 数据根目录：账号目录/日志/缓存/QQ 数据存放位置。\n# 缺省 = <项目根>/.napuketto（部署场景，跨平台，无需修改）。\n# 支持绝对路径、\"~/\" 前缀（用户主目录）、相对路径（相对启动目录）。\n# dataDir = \".napuketto\"\n\n# 多账号（supervisor）模式下，账号进程崩溃是否自动重启\nautoRestart = true\n\n# 崩溃后自动重启的延迟（毫秒）\nrestartDelayMs = 2000\n\n# ------------------------------------------------------------\n# 日志（[log]，可选——不配置即用缺省：终端 pretty 多行 / 管道 single-line）\n# ------------------------------------------------------------\n# 嵌入式宿主（把 napuketto 打进服务端等场景）推荐：\n#   [log]\n#   format = \"single-line\"     # 或 \"json\"（NDJSON，宿主按 level/module 精确路由）\n#   level = \"warn\"             # 控制台只留警告以上，细节进文件（配 [log.file]）\n#   banner = false\n#\n# [log]\n# format = \"pretty\"            # pretty | single-line | json（缺省按 TTY 自动）\n# level = \"info\"               # trace|debug|info|warn|error|fatal（控制台级别）\n# banner = true                # 启动字符画\n# timestamp = \"local\"          # local | iso8601 | elapsed\n# unboundReceive = true        # false = 未绑定频道的接收行不打（kurobot 握手后生效）\n# [log.levels]                 # 按模块覆盖级别：cli / kernel / loader / ob11\n# # loader = \"debug\"           # 例：终端上看接收行（默认已降 debug）\n# # ob11 = \"debug\"             # 例：协议校准数据（含原始 hex）\n# [log.file]                   # 独立文件 sink（可选；级别可低于控制台）\n# # path = \"logs/napuketto-console.log\"\n# # level = \"debug\"\n#\n# 环境变量覆盖（优先级高于本文件）：NAPUKETTO_LOG_LEVEL / NAPUKETTO_LOG_FORMAT /\n# NAPUKETTO_NO_BANNER（兼容旧拼写 NAPKETTO_LOG_LEVEL）。\n\n# ------------------------------------------------------------\n# 账号（至少一个，qq 必填）\n# ------------------------------------------------------------\n\n[[accounts]]\nqq = \"${RESERVED_PLACEHOLDER_QINS[0]}\"            # 占位值，必须替换为你的 QQ 号，否则启动报错\nenabled = true           # 是否启用（可选，缺省 true）\n\n[accounts.onebot11]      # 该账号的 OneBot 11 配置（无此段 = 不启用 OB11）\n\n# 鉴权 token（全局默认）：HTTP/WS 连接必须携带。\n#   校验方式：Authorization: Bearer <token> / 裸 token / URL 参数 ?access_token=<token>\n#   每个网络实例可单独覆盖（见下文各实例的 token 字段）。\n#   留空 = 不鉴权（仅本机调试推荐）。\n# token = \"\"\n\n# 心跳 meta 事件间隔（毫秒）；0 = 关闭心跳事件\nheartbeatInterval = 3000\n\n# 是否上报机器人自己发的消息（OB11 规范默认不上报）\nreportSelfMessage = false\n\n# 消息内容格式：array = 消息段数组（标准 OneBot 11），string = CQ 码字符串\nmessagePostFormat = \"array\"\n\n# 群文件报形式：false（默认）= message 事件 + file 段（go-cqhttp 兼容）；\n# true = 群文件消息改报 group_upload notice 事件（替代 message 事件）\ngroupUploadAsNotice = false\n\n# ---- HTTP 反向服务器（接收第三方 POST 指令），可配置多个 ----\n[[accounts.onebot11.httpServers]]\nenabled = true\nhost = \"127.0.0.1\"       # 监听地址；0.0.0.0 = 监听所有网卡（局域网可连）\nport = 3000\n# token = \"abc\"          # 可选：覆盖全局 token\n\n# ---- HTTP 正向上报（Webhook：把事件 POST 到第三方地址），可配置多个 ----\n# [[accounts.onebot11.httpPostUrls]]\n# enabled = true\n# url = \"http://127.0.0.1:8080/onebot\"   # 第三方接收地址\n# token = \"abc\"                          # 可选：覆盖全局 token\n# timeoutMs = 5000                       # 可选：上报超时（毫秒），缺省不超时\n\n# ---- WS 反向服务器（外部 WS 客户端主动连入），可配置多个 ----\n[[accounts.onebot11.wsServers]]\nenabled = true\nhost = \"127.0.0.1\"\nport = 3001\n# token = \"abc\"                          # 可选：覆盖全局 token\n# heartbeatInterval = 30000              # 可选：WS ping 间隔（毫秒）\n\n# ---- WS 正向客户端（主动连接外部 WS，双向），可配置多个 ----\n# [[accounts.onebot11.wsReverseUrls]]\n# enabled = true\n# url = \"ws://127.0.0.1:8081/ws\"         # 第三方 WS 地址（ws:// 或 wss://）\n# token = \"abc\"                          # 可选：覆盖全局 token\n# reconnectDelayMs = 5000                # 可选：断线重连延迟（毫秒）\n# maxReconnectAttempts = 10              # 可选：最大重连次数（缺省无限）\n# rejectUnauthorized = true              # 可选：wss:// 是否校验证书（自签证书设 false）\n# heartbeatInterval = 30000              # 可选：WS ping 间隔（毫秒）\n\n# 第二个账号示例（只开 Satori）：\n# [[accounts]]\n# qq = \"${RESERVED_PLACEHOLDER_QINS[1]}\"\n# [accounts.satori]\n# # token = \"\"                           # 可选：Satori 鉴权 token\n# [[accounts.satori.httpServers]]        # HTTP RPC（POST /v1/{resource}.{method}）\n# enabled = true\n# host = \"127.0.0.1\"\n# port = 5500\n# [[accounts.satori.wsServers]]          # WS 事件服务（/v1/events）\n# enabled = true\n# host = \"127.0.0.1\"\n# port = 5501\n\n# ------------------------------------------------------------\n# KuroBot 群服互通（kurobridge-ws 客户端，MVP-3）\n# ------------------------------------------------------------\n# 账号内写 [accounts.kurobot] 段即启用；不写 = 不启用。作为 WS 客户端\n# 主动连入 KuroBot 服务端（Minecraft 服务器 kurobot 插件）。\n# QQ 群文字 ↔ 游戏聊天双向互通；群命令（前缀开头）→ 游戏命令。\n# [accounts.kurobot]\n# url = \"ws://127.0.0.1:25580\"           # 必填：KuroBot 服务端地址（ws:// 或 wss://）\n# # token = \"\"                           # 可选：鉴权 token（服务端配了则必填，错 token 拒连）\n# # client = \"napukettoqq\"               # 可选：自报身份（缺省 napukettoqq/<版本>）\n# # commandPrefix = \"/\"                  # 可选：群命令前缀\n# # pingIntervalMs = 15000               # 可选：应用层心跳间隔（毫秒，须 < 30000）\n# # chatTemplate = \"[{player}] {content}\"    # 游戏聊天渲染模板\n# # joinTemplate = \"{player} 加入了服务器\"    # 玩家进服模板\n\n# ------------------------------------------------------------\n# Milky 协议（P0）\n# ------------------------------------------------------------\n# 账号内写 [accounts.milky] 段且 enabled = true 即启用；不写 = 不启用。\n# 单端口 HTTP：POST /api/:api 调用动作 + GET /event 事件推送（SSE / WS）。\n# [accounts.milky]\n# enabled = true                         # 启用开关（false = 不生效）\n# host = \"127.0.0.1\"                     # 监听地址\n# port = 3001                            # 监听端口（/api 与 /event 同端口）\n# # token = \"\"                           # 可选：access_token（空 = 不校验，仅限内网）\n# # eventModes = [\"sse\", \"ws\"]           # /event 允许的连接形态\n# # webhooks = []                        # 可选：额外事件推送地址（WebHook POST）\n# # cacheDir = \"cache\"                   # 可选：发送远程媒体 URI 的下载缓存目录\n# # leaveTemplate = \"{player} 离开了服务器\"   # 玩家退服模板\n# # deathTemplate = \"{player} {message}\"     # 玩家死亡模板（空消息显示「死亡了」）\n`;\n}\n","/**\n * 主配置 store：默认值、ConfigBase 子类、模板落盘、内联/文件来源加载。\n *\n * 从 config-cmds.ts 拆出（2026-10-25 模块收拢）：\n * - `CliConfigStore` 只负责 napuketto.toml 的读写/校验（kernel ConfigBase）；\n * - `loadCliConfigWithSource` 负责来源决议（NAPKETTO_CONFIG_JSON 优先）与来源日志；\n * - 4 个 config 子命令留在 commands/config.ts，不反向依赖本文件的私有实现。\n */\nimport { mkdirSync } from \"node:fs\";\nimport { access, writeFile } from \"node:fs/promises\";\nimport { dirname } from \"node:path\";\nimport type { ConfigSchema } from \"@napuketto/kernel\";\nimport { ConfigBase, resolveConfigPath, resolveDataRoot } from \"@napuketto/kernel\";\nimport { logger } from \"../logger.js\";\nimport { type ConfigSource, parseInlineConfig, readInlineConfigText } from \"./inline.js\";\nimport { type CliConfig, parseCliConfig } from \"./schema.js\";\nimport { configTemplate } from \"./template.js\";\n\n/** 主配置默认值（dataRoot 为当前解析的数据根 = 项目根/.napuketto）。 */\nexport function defaultCliConfig(dataRoot: string): CliConfig {\n    return {\n        dataDir: dataRoot,\n        autoRestart: true,\n        restartDelayMs: 2000,\n        accounts: [],\n    };\n}\n\n/** 配置文件缺失 → 生成带注释模板（首次启动自动生成默认配置）。 */\nasync function ensureConfigTemplate(path: string): Promise<void> {\n    try {\n        await access(path);\n    } catch {\n        mkdirSync(dirname(path), { recursive: true });\n        await writeFile(path, `${configTemplate()}\\n`, \"utf8\");\n        logger.info({ path }, \"配置文件不存在，已生成默认模板（请编辑 accounts 段填入 QQ 号）\");\n    }\n}\n\n/** 主配置 store（读/写/校验；.toml 后缀 → smol-toml 序列化）。\n * 配置文件在项目根（resolveConfigPath），dataRoot 仅作兜底与 dataDir 默认值。 */\nexport class CliConfigStore extends ConfigBase<CliConfig> {\n    constructor(dataRoot: string) {\n        super({\n            path: resolveConfigPath({ dataRoot }),\n            schema: { parse: parseCliConfig } satisfies ConfigSchema<CliConfig>,\n            defaults: defaultCliConfig(dataRoot),\n        });\n    }\n}\n\n/** 读取主配置（缺失自动落模板；loadCliConfigWithSource 文件分支内部用）。 */\nasync function loadCliConfig(dataRoot: string): Promise<CliConfig> {\n    const store = new CliConfigStore(dataRoot);\n    await ensureConfigTemplate(store.path);\n    return await store.load();\n}\n\n/** 已加载主配置（含来源；启动路径与 config validate 共用）。 */\nexport interface LoadedCliConfig {\n    config: CliConfig;\n    source: ConfigSource;\n    /** file 来源的配置文件路径；inline 无文件为 undefined。 */\n    path?: string;\n}\n\n/** 生效配置来源（内联优先；只解析来源，不读文件、不落模板）。 */\nexport type ResolvedCliConfigSource =\n    | { source: \"inline\"; text: string }\n    | { source: \"file\"; path: string; dataRoot: string };\n\n/**\n * 解析生效配置来源（loadCliConfigWithSource 与 config validate 无参分支共用）：\n * 内联非空 → inline；否则按 kernel resolveConfigPath 解析文件路径，并带回数据根。\n */\nexport function resolveCliConfigSource(opts: { dataDir?: string } = {}): ResolvedCliConfigSource {\n    const inlineText = readInlineConfigText();\n    if (inlineText !== undefined) {\n        return { source: \"inline\", text: inlineText };\n    }\n    const dataRoot = resolveDataRoot(opts.dataDir);\n    return { source: \"file\", path: resolveConfigPath({ dataRoot }), dataRoot };\n}\n\n/** 「配置来源」日志每进程至多一行（autoStart 与 runSupervisor 各加载一次）。 */\nlet sourceLogged = false;\n\n/**\n * 加载主配置（内联优先，2026-10-25 嵌入式契约）：\n * NAPKETTO_CONFIG_JSON 非空 → 内存文档校验（不读 / 不写 / 不校验任何 toml\n * 文件），打一行来源日志；否则现行文件链路（缺失自动落模板）。校验失败两形态\n * 同为 ConfigError（exit 78），文案区别只在来源标注。\n */\nexport async function loadCliConfigWithSource(\n    opts: { dataDir?: string } = {},\n): Promise<LoadedCliConfig> {\n    const resolved = resolveCliConfigSource(opts);\n    if (resolved.source === \"inline\") {\n        const config = parseInlineConfig(resolved.text);\n        if (!sourceLogged) {\n            sourceLogged = true;\n            logger.info(\"配置来源: inline（NAPKETTO_CONFIG_JSON）\");\n        }\n        return { config, source: \"inline\" };\n    }\n    const config = await loadCliConfig(resolved.dataRoot);\n    return { config, source: \"file\", path: resolved.path };\n}\n","/**\n * cli config 子命令：init / list / apply（P6，2026-08-05；2026-08-07 配置文件移到项目根；\n * 2026-08-08 结构拍板：账号内嵌协议段）\n *\n * **全局单配置文件**：`<项目根>/napuketto.toml`（2026-08-07 用户拍板：配置文件放项目根，\n * 数据仍按数据根组织），本项目所有配置都在里面管理（TOML + smol-toml，配合 zod 校验，\n * 用户 2026-08-05 拍板：JSON 门槛太高）。本机配置不入库（.gitignore）。\n *\n * 2026-08-08 结构（用户拍板）：**一个 QQ 账号一个 [[accounts]] 段，协议与通信配置嵌在\n * 账号内**，账号必填（至少一个，qq 必填）：\n *\n *   # dataDir = \".napuketto\"    # 可选；缺省 = 项目根/.napuketto（跨平台）\n *   autoRestart = true\n *   restartDelayMs = 2000\n *   [[accounts]]\n *   qq = \"123456\"                # QQ 号（必填）\n *   enabled = true\n *   [accounts.onebot11]          # 该账号的 OB11 段（无 = 不启用）\n *   token = \"\"\n *   [[accounts.onebot11.httpServers]]\n *   enabled = true\n *   port = 3000\n *   [accounts.satori]            # 该账号的 Satori 段（无 = 不启用）\n *   [[accounts.satori.httpServers]]\n *   enabled = true\n *   port = 5500\n *\n * 配置文件路径解析见 kernel `resolveConfigPath`（NAPKETTO_CONFIG 显式 > 项目根探测 > 数据根兜底）；\n * 校验器为手写 parse（适配 kernel ConfigBase 的 ConfigSchema 形状）；\n * 协议段由对应协议包的 zod schema 校验（boot 装配时按登录账号 uin 从 accounts 取段作 seed）。\n *\n * 2026-10-25 模块收拢：store/默认值/来源加载移入 config/store.ts，本文件只保留\n * 4 个子命令实现与只读校验。\n */\nimport type { Dirent } from \"node:fs\";\nimport { mkdirSync, readdirSync } from \"node:fs\";\nimport { access, readFile, writeFile } from \"node:fs/promises\";\nimport { dirname, extname, join } from \"node:path\";\nimport process from \"node:process\";\nimport type { ConfigSchema } from \"@napuketto/kernel\";\nimport {\n    ConfigBase,\n    configError,\n    kernelError,\n    parseToml,\n    resolveDataRoot,\n    stringifyToml,\n} from \"@napuketto/kernel\";\nimport { type ConfigSource, parseInlineConfig } from \"../config/inline.js\";\nimport { type CliConfig, parseCliConfig } from \"../config/schema.js\";\nimport { CliConfigStore, defaultCliConfig, resolveCliConfigSource } from \"../config/store.js\";\nimport { configTemplate } from \"../config/template.js\";\nimport { logger } from \"../logger.js\";\n\n/** CliConfig → 普通对象（smol-toml stringify 入参）。 */\nfunction toRecord(config: CliConfig): Record<string, unknown> {\n    return config as unknown as Record<string, unknown>;\n}\n\n/** config init：生成全局 TOML 配置文件（项目根）+ 数据根目录。\n * 文件不存在 → 写带注释模板；已存在 → 跳过（不覆盖用户配置）。\n * 输出原始模板内容（账号未填时解析会校验失败，init 只负责生成不校验）。 */\nexport async function cmdConfigInit(opts: { dataDir?: string }): Promise<void> {\n    const dataRoot = resolveDataRoot(opts.dataDir);\n    mkdirSync(dataRoot, { recursive: true });\n    const store = new CliConfigStore(dataRoot);\n    let created = false;\n    try {\n        await access(store.path);\n    } catch {\n        mkdirSync(dirname(store.path), { recursive: true });\n        await writeFile(store.path, `${configTemplate()}\\n`, \"utf8\");\n        created = true;\n    }\n    const raw = await readFile(store.path, \"utf8\");\n    logger.info({ dataRoot }, \"数据根\");\n    if (created) {\n        logger.info({ path: store.path }, \"全局配置已生成（请编辑 accounts 段填入 QQ 号）\");\n    } else {\n        logger.info({ path: store.path }, \"全局配置已存在（跳过生成，避免覆盖用户配置）\");\n    }\n    // TOML 内容为功能输出（机器可读），保持原样 stdout，不做日志包装\n    process.stdout.write(raw);\n}\n\n/** config list：列出全局配置与各账号目录。 */\nexport async function cmdConfigList(opts: { dataDir?: string }): Promise<void> {\n    const dataRoot = resolveDataRoot(opts.dataDir);\n    const store = new CliConfigStore(dataRoot);\n    const config = await store.load();\n    logger.info({ dataRoot }, \"数据根\");\n    logger.info({ path: store.path }, \"全局配置\");\n    process.stdout.write(`${stringifyToml(toRecord(config))}\\n`);\n    // 账号目录（数据根下的子目录）\n    let entries: Dirent[];\n    try {\n        entries = readdirSync(dataRoot, { withFileTypes: true });\n    } catch {\n        entries = [];\n    }\n    for (const entry of entries) {\n        if (entry.isDirectory()) {\n            printAccountConfig(entry.name, dataRoot);\n        }\n    }\n}\n\n/** 打印账号 config 目录文件清单。 */\nfunction printAccountConfig(account: string, dataRoot: string): void {\n    const configDir = join(dataRoot, account, \"config\");\n    let files: string[] = [];\n    try {\n        files = readdirSync(configDir).filter((f) => f.endsWith(\".json\") || f.endsWith(\".toml\"));\n    } catch {\n        files = [];\n    }\n    let fileList = \"（未初始化）\";\n    if (files.length > 0) {\n        fileList = files.join(\", \");\n    }\n    // 注意：字段名用 account 而非 name——name 是 pino 保留键（logger name），\n    // 会被 pino-pretty 渲染成 `(name/pid)` 元数据头而非普通字段。\n    logger.info({ account, files: fileList }, \"账号配置\");\n}\n\n/** 解析外部配置文本（按扩展名推断 TOML/JSON）。 */\nfunction parseExternalConfig(file: string, rawText: string): unknown {\n    if (extname(file).toLowerCase() === \".toml\") {\n        return parseToml(rawText);\n    }\n    try {\n        return JSON.parse(rawText) as unknown;\n    } catch {\n        throw kernelError(`外部配置 ${file} 不是合法 JSON`, \"INVALID_PARAM\");\n    }\n}\n\n/** config apply：应用外部配置（顶层覆盖合并后写回全局配置）。 */\nexport async function cmdConfigApply(file: string, opts: { dataDir?: string }): Promise<void> {\n    const dataRoot = resolveDataRoot(opts.dataDir);\n    const store = new CliConfigStore(dataRoot);\n    const existing = await store.load();\n    let rawText: string;\n    try {\n        rawText = await readFile(file, \"utf8\");\n    } catch (err) {\n        let message = String(err);\n        if (err instanceof Error) {\n            const { message: errMessage } = err;\n            message = errMessage;\n        }\n        throw kernelError(`读取外部配置失败 ${file}: ${message}`, \"INVALID_PARAM\", { cause: err });\n    }\n    const partial = parseExternalConfig(file, rawText);\n    if (typeof partial !== \"object\" || partial === null) {\n        throw kernelError(\"外部配置必须是对象\", \"INVALID_PARAM\");\n    }\n    const patch = partial as Record<string, unknown>;\n    const merged: Record<string, unknown> = { ...existing, ...patch };\n    const next = parseCliConfig(merged);\n    await store.save(next);\n    logger.info({ path: store.path }, \"全局配置已更新\");\n    // TOML 内容为功能输出（机器可读），保持原样 stdout，不做日志包装\n    process.stdout.write(`${stringifyToml(toRecord(next))}\\n`);\n}\n\n/** 读取配置文件文本（validate 纯只读：ENOENT 不落模板，按「配置缺失」报 ConfigError）。 */\nasync function readConfigTextForValidate(path: string): Promise<string> {\n    try {\n        return await readFile(path, \"utf8\");\n    } catch (err) {\n        if ((err as NodeJS.ErrnoException).code === \"ENOENT\") {\n            throw configError(`配置文件不存在: ${path}`);\n        }\n        throw configError(`读取配置文件失败: ${path}`, { cause: err });\n    }\n}\n\n/**\n * 校验配置文件（与运行时同构：ConfigBase.parseText 反序列化 + 校验，报错文案\n * 含路径且与 loadCliConfig 主路径逐字一致；格式按扩展名推断，同 ConfigBase）。\n */\nasync function validateConfigFile(path: string, dataRoot: string): Promise<void> {\n    const raw = await readConfigTextForValidate(path);\n    const store = new ConfigBase<CliConfig>({\n        path,\n        schema: { parse: parseCliConfig } satisfies ConfigSchema<CliConfig>,\n        defaults: defaultCliConfig(dataRoot),\n    });\n    store.parseText(raw);\n}\n\n/** config validate 选项（--config / --config-json 二选一；无参 = 校验生效配置）。 */\nexport interface ConfigValidateOptions {\n    /** undefined = 未指定（与 --config-json 互斥）。 */\n    configPath?: string | undefined;\n    /** undefined = 未指定（与 --config-path 互斥）。 */\n    configJson?: string | undefined;\n    dataDir?: string;\n}\n\n/** config validate 结果（stdout 单行摘要由 cli/program.ts 渲染；测试断言返回值）。 */\nexport interface ConfigValidateResult {\n    source: ConfigSource;\n    /** file 来源的配置路径（inline 为 undefined）。 */\n    path?: string;\n}\n\n/**\n * config validate：校验配置（exit 0 = 合法；exit 78 = 校验失败，ConfigError 一族；\n * --config 与 --config-json 同给 = 用法错误，exit 1）。纯只读——文件形态不落模板\n * （无参形态文件缺失按配置缺失报 78），不触碰数据目录。\n */\nexport async function cmdConfigValidate(\n    opts: ConfigValidateOptions,\n): Promise<ConfigValidateResult> {\n    const { configPath, configJson } = opts;\n    if (configPath !== undefined && configJson !== undefined) {\n        throw kernelError(\"config validate：--config 与 --config-json 只能二选一\", \"INVALID_PARAM\");\n    }\n    if (configJson !== undefined) {\n        parseInlineConfig(configJson);\n        return { source: \"inline\" };\n    }\n    if (configPath !== undefined) {\n        await validateConfigFile(configPath, resolveDataRoot(opts.dataDir));\n        return { source: \"file\", path: configPath };\n    }\n    // 无参：校验当前生效配置（内联优先；文件缺失按配置缺失报 78，不落模板）\n    const resolved = resolveCliConfigSource(opts);\n    if (resolved.source === \"inline\") {\n        parseInlineConfig(resolved.text);\n        return { source: \"inline\" };\n    }\n    await validateConfigFile(resolved.path, resolved.dataRoot);\n    return { source: \"file\", path: resolved.path };\n}\n","/**\n * state.ts：账号运行时状态文件 + 进程控制原语（2026-09-08 T8）。\n *\n * 跨进程通信选型（决策记录）：现有 IPC 为 stdio JSON 行协议（NAPUTO_IPC=1，\n * koishi 插件专用），supervisor 子进程不在此模式；引入独立通道（socket/pipe）\n * 复杂度高。采用 **PID 状态文件**：supervisor/单账号 boot 启动时把进程信息写\n * `<数据根>/<uin>/runtime.json`，supervisor 自身写 `<数据根>/supervisor.json`；\n * `napuketto status/stop/restart` 读文件 + liveness 检测 + 树杀（win32\n * taskkill /T /F，杀 boot 进程树连带 self-host 孙进程）+ detached 重启。\n */\nimport { type ChildProcess, spawn } from \"node:child_process\";\nimport { mkdirSync, readdirSync, readFileSync, writeFileSync } from \"node:fs\";\nimport { join } from \"node:path\";\nimport process from \"node:process\";\n\n/** 账号运行时状态（runtime.json）。 */\nexport interface AccountRuntime {\n    /** 账号 QQ 号（= 数据目录名）。 */\n    uin: string;\n    /** 宿主引导进程 pid（boot 进程；树杀连带 self-host 孙进程）。 */\n    pid: number;\n    /** self-host 子进程 pid（诊断用，可能缺省）。 */\n    selfHostPid?: number;\n    /** 启动时间（ISO 字符串）。 */\n    startedAt: string;\n    /** 运行形态。 */\n    kind: \"supervisor-child\" | \"single-boot\";\n    /** 状态（写入时快照；读取方用 liveness 修正显示）。 */\n    status: \"running\" | \"exited\";\n    /** 退出码（status=exited 时）。 */\n    exitCode?: number | null;\n    /** supervisor 守护重启次数。 */\n    restartCount?: number;\n}\n\n/** supervisor 运行时状态（supervisor.json）。 */\nexport interface SupervisorRuntime {\n    pid: number;\n    startedAt: string;\n    /** 编排的账号列表。 */\n    accounts: string[];\n}\n\n/** runtime.json 文件名。 */\nconst RUNTIME_FILE = \"runtime.json\";\n/** supervisor.json 文件名。 */\nconst SUPERVISOR_FILE = \"supervisor.json\";\n\n/** 账号状态文件路径。 */\nexport function runtimeStatePath(dataRoot: string, uin: string): string {\n    return join(dataRoot, uin, RUNTIME_FILE);\n}\n\n/** supervisor 状态文件路径。 */\nexport function supervisorStatePath(dataRoot: string): string {\n    return join(dataRoot, SUPERVISOR_FILE);\n}\n\n/** 写账号运行时状态（原子覆盖）。 */\nexport function writeAccountRuntime(dataRoot: string, state: AccountRuntime): void {\n    const path = runtimeStatePath(dataRoot, state.uin);\n    mkdirSync(join(path, \"..\"), { recursive: true });\n    writeFileSync(path, `${JSON.stringify(state, null, 2)}\\n`, \"utf8\");\n}\n\n/** 读账号运行时状态（缺失/损坏返回 null）。 */\nexport function readAccountRuntime(dataRoot: string, uin: string): AccountRuntime | null {\n    return readJson(runtimeStatePath(dataRoot, uin)) as AccountRuntime | null;\n}\n\n/** 写 supervisor 运行时状态（数据根缺省时自动创建——首次在新目录 start 不再 ENOENT）。 */\nexport function writeSupervisorRuntime(dataRoot: string, state: SupervisorRuntime): void {\n    mkdirSync(dataRoot, { recursive: true });\n    writeFileSync(supervisorStatePath(dataRoot), `${JSON.stringify(state, null, 2)}\\n`, \"utf8\");\n}\n\n/** 读 supervisor 运行时状态（缺失返回 null）。 */\nexport function readSupervisorRuntime(dataRoot: string): SupervisorRuntime | null {\n    return readJson(supervisorStatePath(dataRoot)) as SupervisorRuntime | null;\n}\n\n/** 读 JSON 文件（缺失/解析失败返回 null）。 */\nfunction readJson(path: string): unknown {\n    try {\n        return JSON.parse(readFileSync(path, \"utf8\")) as unknown;\n    } catch {\n        return null;\n    }\n}\n\n/** 列出数据根下全部账号运行时状态（扫一级目录 runtime.json）。 */\nexport function listAccountRuntimes(dataRoot: string): AccountRuntime[] {\n    let entries: string[] = [];\n    try {\n        entries = readdirSync(dataRoot, { withFileTypes: true })\n            .filter((e) => e.isDirectory())\n            .map((e) => e.name);\n    } catch {\n        return [];\n    }\n    const out: AccountRuntime[] = [];\n    for (const uin of entries) {\n        const state = readAccountRuntime(dataRoot, uin);\n        if (state !== null) {\n            out.push(state);\n        }\n    }\n    return out;\n}\n\n/** pid 存活检测（signal 0；EPERM 视为存活——进程存在但无权限）。 */\nexport function isPidAlive(pid: number): boolean {\n    if (!Number.isInteger(pid) || pid <= 0) {\n        return false;\n    }\n    try {\n        process.kill(pid, 0);\n        return true;\n    } catch (err) {\n        return (err as NodeJS.ErrnoException).code === \"EPERM\";\n    }\n}\n\n/** 树杀命令构造（win32：taskkill /T /F 连孙进程；posix：kill 信号）。 */\nexport function killProcessTree(pid: number): void {\n    if (process.platform === \"win32\") {\n        spawn(\"taskkill\", [\"/PID\", String(pid), \"/T\", \"/F\"], { stdio: \"ignore\" });\n        return;\n    }\n    try {\n        process.kill(pid, \"SIGTERM\");\n    } catch {\n        // 已退出：无需处理\n    }\n}\n\n/** detached 拉起 node 进程（restart 用；立即返回不等待）。 */\nexport function spawnDetached(args: string[], cwd?: string): ChildProcess {\n    const child = spawn(process.execPath, args, {\n        detached: true,\n        stdio: \"ignore\",\n        ...(cwd !== undefined ? { cwd } : {}),\n    });\n    child.unref();\n    return child;\n}\n\n/** 状态聚合视图（status 命令输出）。 */\nexport interface AccountStatusRow {\n    uin: string;\n    pid: number;\n    /** 文件状态 + liveness 修正后的实际状态。 */\n    alive: boolean;\n    kind: AccountRuntime[\"kind\"];\n    startedAt: string;\n    restartCount: number;\n    exitCode: number | null | undefined;\n}\n\n/** 聚合各账号状态（liveness 修正：文件 running 但 pid 已死 → not running）。 */\nexport function aggregateStatus(\n    runtimes: AccountRuntime[],\n    aliveFn: (pid: number) => boolean = isPidAlive,\n): AccountStatusRow[] {\n    return runtimes.map((r) => ({\n        uin: r.uin,\n        pid: r.pid,\n        alive: r.status === \"running\" ? aliveFn(r.pid) : false,\n        kind: r.kind,\n        startedAt: r.startedAt,\n        restartCount: r.restartCount ?? 0,\n        exitCode: r.exitCode,\n    }));\n}\n","/**\n * ops.ts：status / stop / restart 运维命令实现（2026-09-08 T8）。\n *\n * 数据源：runtime/state 状态文件（supervisor/单账号 boot 写入）+ liveness 检测。\n * stop/restart 语义（2026-10-25 优雅化）：\n *  - stop -q <uin>：写单账号停止哨兵 → 等该账号进程链优雅退出 → 超时树杀兜底。\n *    ⚠️ supervisor 在跑且 autoRestart 时账号会被自动拉起——提示用户先 `napuketto stop`。\n *  - stop（无 -q）：写 all 哨兵（supervisor + 全部账号优雅退出）→ 超时树杀兜底。\n *  - restart：stop 同目标 + detached 重新拉起（-q → 单账号 boot；无 -q →\n *    supervisor autoStart）。\n */\nimport process from \"node:process\";\nimport { removeStopSentinel, writeStopSentinel } from \"@napuketto/loader\";\nimport { logger } from \"../logger.js\";\nimport {\n    type AccountRuntime,\n    aggregateStatus,\n    isPidAlive,\n    killProcessTree,\n    listAccountRuntimes,\n    readSupervisorRuntime,\n    spawnDetached,\n} from \"../runtime/state.js\";\n\n/** 运维命令选项。 */\nexport interface OpsOptions {\n    dataDir?: string;\n    /** 目标账号（stop/restart 指定；status 过滤）。 */\n    qq?: string;\n}\n\n/** 优雅停等待上限（毫秒）：哨兵后子进程链自行退出，超时树杀兜底。 */\nconst GRACEFUL_STOP_WAIT_MS = 8000;\n/** 存活轮询间隔（毫秒）。 */\nconst LIVENESS_POLL_MS = 200;\n\n/** 等待 pid 列表全部退出（返回超时仍未退的 pid）。 */\nasync function waitForPidsExit(pids: number[]): Promise<number[]> {\n    const deadline = Date.now() + GRACEFUL_STOP_WAIT_MS;\n    let alive = pids.filter((pid) => pid > 0 && isPidAlive(pid));\n    while (alive.length > 0 && Date.now() < deadline) {\n        await new Promise((resolve) => setTimeout(resolve, LIVENESS_POLL_MS));\n        alive = alive.filter((pid) => isPidAlive(pid));\n    }\n    return alive;\n}\n\n/** status：聚合输出各账号运行状态（含 supervisor 自身）。 */\nexport function cmdStatus(dataRoot: string, opts: OpsOptions): void {\n    const supervisor = readSupervisorRuntime(dataRoot);\n    if (supervisor !== null) {\n        logger.info(\n            {\n                pid: supervisor.pid,\n                alive: isPidAlive(supervisor.pid),\n                accounts: supervisor.accounts,\n                startedAt: supervisor.startedAt,\n            },\n            \"supervisor\",\n        );\n    } else {\n        logger.info(\"supervisor 未运行（无状态文件）\");\n    }\n    const runtimes = listAccountRuntimes(dataRoot).filter(\n        (r) => opts.qq === undefined || r.uin === opts.qq,\n    );\n    if (runtimes.length === 0) {\n        logger.warn({ dataRoot }, \"没有账号运行时状态（从未启动或数据根不含 runtime.json）\");\n        return;\n    }\n    for (const row of aggregateStatus(runtimes)) {\n        logger.info(\n            {\n                uin: row.uin,\n                alive: row.alive,\n                pid: row.pid,\n                kind: row.kind,\n                startedAt: row.startedAt,\n                restartCount: row.restartCount,\n                ...(row.exitCode !== undefined ? { exitCode: row.exitCode } : {}),\n            },\n            \"账号状态\",\n        );\n    }\n}\n\n/** 树杀目标账号（按 runtime pid）。 */\nfunction stopAccount(runtime: AccountRuntime): void {\n    killProcessTree(runtime.pid);\n    logger.info({ uin: runtime.uin, pid: runtime.pid }, \"已发送停止（树杀）\");\n}\n\n/** stop：-q 停单账号；无 -q 停 supervisor + 全部账号兜底。\n *\n * 2026-10-25 优雅化：先写停止哨兵（目标账号或 all）→ 等进程链自行有序退出\n * （退出码 0）→ 超时残留树杀兜底 → 清理哨兵。单账号哨兵只命中对应 boot/self-host，\n * 不干扰同数据根的其他账号。\n */\n/** stop -q：写单账号哨兵 → 等优雅退出 → 超时树杀兜底 → 清哨兵。 */\nasync function stopSingleAccount(dataRoot: string, target: AccountRuntime): Promise<void> {\n    logger.info({ uin: target.uin, pid: target.pid }, \"已发送停止请求（哨兵），等待退出\");\n    writeStopSentinel(dataRoot, target.uin);\n    const stragglers = await waitForPidsExit([target.pid]);\n    for (const pid of stragglers) {\n        logger.warn({ uin: target.uin, pid }, \"限时内未退出，树杀兜底\");\n        killProcessTree(pid);\n    }\n    removeStopSentinel(dataRoot);\n    const supervisor = readSupervisorRuntime(dataRoot);\n    if (supervisor !== null) {\n        logger.warn(\n            { supervisorPid: supervisor.pid },\n            \"supervisor 仍在运行且 autoRestart 开启时会自动拉起该账号；如需彻底停止请执行 napuketto stop（停 supervisor）\",\n        );\n    }\n}\n\nexport async function cmdStop(dataRoot: string, opts: OpsOptions): Promise<void> {\n    const runtimes = listAccountRuntimes(dataRoot);\n    if (opts.qq !== undefined) {\n        const target = runtimes.find((r) => r.uin === opts.qq);\n        if (target === undefined) {\n            logger.error({ uin: opts.qq }, \"账号无运行时状态（未启动过）\");\n            process.exitCode = 1;\n            return;\n        }\n        await stopSingleAccount(dataRoot, target);\n        return;\n    }\n    const supervisor = readSupervisorRuntime(dataRoot);\n    const supervisorPid = supervisor !== null && isPidAlive(supervisor.pid) ? supervisor.pid : 0;\n    if (supervisor !== null) {\n        logger.info({ pid: supervisor.pid }, \"已发送停止请求（哨兵），等待 supervisor 退出\");\n        writeStopSentinel(dataRoot, \"all\");\n        const alive = await waitForPidsExit([supervisorPid]);\n        for (const pid of alive) {\n            logger.warn({ pid }, \"supervisor 限时内未退出，树杀兜底\");\n            killProcessTree(pid);\n        }\n    } else {\n        logger.warn(\"supervisor 未运行（无状态文件）\");\n    }\n    // 兜底：残留账号进程逐个树杀（哨兵转发失败的场合）\n    const stragglers = await waitForPidsExit(runtimes.map((r) => r.pid));\n    for (const runtime of runtimes) {\n        if (stragglers.includes(runtime.pid)) {\n            stopAccount(runtime);\n        }\n    }\n    removeStopSentinel(dataRoot);\n}\n\n/** restart：stop 同目标 + detached 拉起。 */\nexport async function cmdRestart(dataRoot: string, opts: OpsOptions): Promise<void> {\n    await cmdStop(dataRoot, opts);\n    // 等待进程树退出（实例锁：同账号数据目录单实例，立即拉起会抢锁失败）\n    await new Promise((resolve) => setTimeout(resolve, 1500));\n    const entry = process.argv[1] ?? \"\";\n    const args =\n        opts.qq !== undefined\n            ? [entry, \"-q\", opts.qq, \"--data-dir\", dataRoot]\n            : [entry, \"--data-dir\", dataRoot];\n    spawnDetached(args);\n    logger.info(\n        { args: args.slice(1), qq: opts.qq ?? \"(supervisor 全量)\" },\n        \"已 detached 拉起（日志不再接入当前终端，见数据目录 logs/）\",\n    );\n}\n","/**\n * cli boot：单账号启动序列（2026-08-07 用户拍板：只保留自建宿主）\n *\n * resolveQqFiles（多级来源定位 QQ 原生文件）→ 解析各包 dist 入口 → launchSelfHost\n * （标准 node + stub QQNT.dll 直接 dlopen，不拉起 QQ / 不注入）→ 常驻。\n *\n * QQ 原生文件来源（本机未装 QQ 也能跑，2026-08-16 接入）：\n *   L0 NAPUTO_QQ_FILES 显式文件根 → L1 本机 QQ 安装（--qq-path / NAPUTO_QQ_PATH /\n *      注册表 / 常见路径）→ L2 数据根缓存 <数据根>/qq-files/<版本> → 全部缺失时\n *      自动下载官方安装包（sha256 校验 + 7z 解包 + 提取缓存，幂等）。\n * cached 来源下 qq.qqPath 为语义占位（缓存目录无 QQ.exe）——launchSelfHost 只消费\n * qq.wrapperPath / qq.version（NAPUTO_QQ_PATH 仅注入、self-host 未读取），占位安全。\n *\n * 不写业务逻辑：kernel 装配 + 登录 + 协议装配全部在 self-host.cjs → boot-bootstrap.js 完成。\n * 路线 B（拉起 QQ + 注入）已淘汰（launchQqWithLoader 已移除，cli 只走自建宿主）。\n */\nimport type { ChildProcess } from \"node:child_process\";\nimport path from \"node:path\";\nimport process from \"node:process\";\nimport { createInterface } from \"node:readline\";\nimport { fileURLToPath } from \"node:url\";\nimport { resolveConfigPath, resolveDataRoot } from \"@napuketto/kernel\";\nimport {\n    checkInstanceLock,\n    defaultStubDir,\n    isNativeNoiseLine,\n    type LaunchOptions,\n    type LaunchResult,\n    launchSelfHost,\n    type QqInstallInfo,\n    resolveQqFiles,\n    watchStopSentinel,\n    writeStopSentinel,\n} from \"@napuketto/loader\";\nimport QRCode from \"qrcode\";\nimport { isInlineConfigActive } from \"../config/inline.js\";\nimport { effectiveConsoleEnv, logger, resolveCliLogConfig } from \"../logger.js\";\nimport { writeAccountRuntime } from \"./state.js\";\n\n/** 单账号启动选项。 */\nexport interface BootOptions {\n    /** QQ 号（数据目录账号隔离，ADR-016）。 */\n    qq?: string;\n    /** 数据根目录（缺省环境变量/用户目录）。 */\n    dataDir?: string;\n    /** 覆盖 QQ 安装路径（联调）。 */\n    qqPath?: string;\n    /** stub QQNT.dll 目录（缺省 loader 包内闭源 submodule native/stub-test-env）。 */\n    stubDir?: string;\n}\n\n/** 解析 workspace 包的 dist 入口（ESM 解析：包是 ESM-only，exports 无 require 条件）。 */\nasync function packageEntry(pkg: string): Promise<string> {\n    const url = await import.meta.resolve(pkg);\n    return fileURLToPath(url);\n}\n\n/** QR 透出标记行前缀（loader bootstrap-core 非 IPC 模式输出，cli 解析终端渲染）。 */\nconst QR_LINE_PREFIX = \"NAPUTO_QR \";\n\n/** 优雅停等待上限（毫秒）：超时 kill 兜底（Windows 下为硬杀）。 */\nconst GRACEFUL_STOP_TIMEOUT_MS = 10_000;\n\n/**\n * 逐行转发子进程输出到父进程，过滤原生噪音。\n * readline 按 UTF-8 解码 pipe 字节流，再经 process.stdout（TTY 路径，\n * WriteConsoleW UTF-16）输出——顺带修复 pino 中文在 cmd.exe/管道 936 转码\n * 链路下的乱码（原生 printf 字节流无法从 JS 侧改编码，转 pipe 后统一解码）。\n *\n * NAPUTO_QR 标记行（loader bootstrap-core 输出，QR 登录二维码数据）不转发，\n * 解析后用 qrcode 包渲染终端二维码；png 落盘与 URL 提示由 kernel 日志完成。\n * 噪音判定走 loader 共享单一来源（isNativeNoiseLine，与 koishi IPC 路径同源）。\n */\nfunction forwardFiltered(input: NodeJS.ReadableStream, out: NodeJS.WritableStream): void {\n    const lines = createInterface({ input });\n    lines.on(\"line\", (line) => {\n        if (line.startsWith(QR_LINE_PREFIX)) {\n            renderTerminalQr(line.slice(QR_LINE_PREFIX.length));\n            return;\n        }\n        if (isNativeNoiseLine(line)) {\n            return;\n        }\n        out.write(`${line}\\n`);\n    });\n}\n\n/**\n * 渲染终端二维码（qrcode 包 terminal 模式，half-block 字符）。\n * 解析失败/无 url 时静默丢弃——标记行是内部协议，坏行不影响登录。\n */\nfunction renderTerminalQr(raw: string): void {\n    try {\n        const data = JSON.parse(raw) as { qrcodeUrl?: string };\n        const { qrcodeUrl } = data;\n        if (qrcodeUrl === undefined || qrcodeUrl === \"\") {\n            return;\n        }\n        void QRCode.toString(qrcodeUrl, { type: \"terminal\", small: true })\n            .then((str) => {\n                process.stdout.write(`${str}\\n`);\n            })\n            .catch(() => {\n                // 渲染失败静默（不影响登录，kernel 日志的 URL/png 路径仍可用）\n            });\n    } catch {\n        // 坏行静默丢弃\n    }\n}\n\n/** workspace 包 dist 入口三元组（自建宿主装配面）。 */\ninterface PackageEntries {\n    kernelEntry: string;\n    adapterEntry: string;\n    networkEntry: string;\n}\n\n/** 解析自建宿主装配面的三个包入口（ESM 解析，顺序同旧实现）。 */\nasync function resolvePackageEntries(): Promise<PackageEntries> {\n    return {\n        kernelEntry: await packageEntry(\"@napuketto/kernel\"),\n        adapterEntry: await packageEntry(\"@napuketto/adapter\"),\n        networkEntry: await packageEntry(\"@napuketto/network\"),\n    };\n}\n\n/** stub QQNT.dll 目录（--stub-dir > NAPUTO_STUB_DIR > loader 包内闭源 submodule 默认）。 */\nfunction resolveStubDir(opts: BootOptions): string {\n    return opts.stubDir ?? process.env[\"NAPUTO_STUB_DIR\"] ?? defaultStubDir();\n}\n\n/** 错误文案提取（Error 用 message，其余字符串化——保留旧日志文案语义）。 */\nfunction errorMessage(err: unknown): string {\n    return err instanceof Error ? err.message : String(err);\n}\n\n/** QQ 原生文件多级来源 + 自动下载（本机未装 QQ 时走下载管线）。\n * 失败记录可操作提示并置 exitCode 1，返回 undefined（调用方提前返回）。 */\nasync function locateQqFiles(\n    dataRoot: string,\n    opts: BootOptions,\n): Promise<QqInstallInfo | undefined> {\n    try {\n        return await resolveQqFiles({\n            dataRoot,\n            ...(opts.qqPath !== undefined ? { qqPath: opts.qqPath } : {}),\n        });\n    } catch (err) {\n        logger.error(\n            { err },\n            `定位/下载 QQ 原生文件失败：${errorMessage(err)}\\n` +\n                \"（本机未装 QQ 时自动下载官方安装包；若下载失败请检查网络，或手动安装 QQ、\" +\n                \"设置 NAPUTO_QQ_PATH 指定已有安装、NAPUTO_QQ_FILES 指定文件根、\" +\n                \"NAPUTO_QQ_URL 覆盖下载地址）\",\n        );\n        process.exitCode = 1;\n        return;\n    }\n}\n\n/**\n * 单实例锁预检（2026-08-07 根治「多实例抢数据目录锁挂起」）：同一账号数据\n * 目录只允许一个实例（QQ 原生层 MMKV/登录单例有锁，第二个实例抢不到锁会卡死）。\n * 占用 → 快速失败并提示占用 PID；残留（PID 已死 / PID 被复用，2026-09-10\n * cmdline 校验根治）→ self-host 会自动接管。真正的锁由 self-host 子进程\n * 获取/释放（它才是数据目录的实际持有者），cli 这里只做 spawn 前预检，\n * 给用户友好提示（supervisor 等批量拉起同用）。\n * @returns 可用 true；占用时记录错误并置 exitCode 1 返回 false\n */\nfunction ensureInstanceLockFree(cfgDir: string): boolean {\n    const { occupied, pid: holderPid } = checkInstanceLock(cfgDir);\n    if (!occupied) {\n        return true;\n    }\n    logger.error(\n        { pid: holderPid, dataDir: cfgDir },\n        \"数据目录已被其他实例占用，拒绝启动（同一账号数据目录仅允许一个实例；\" +\n            \"占用校验已含 pid 复用检测，如仍误报请删除该目录下的 instance.lock）\",\n    );\n    process.exitCode = 1;\n    return false;\n}\n\n/** 启动信息走结构化日志（时间戳 + 级别 + pid + 元数据，与 kernel 子进程格式一致）。\n * 2026-10-25 级别重分配：引导细节降 debug（banner 之外的定位/路径细节对运行\n * 状态无信息量），致命错误与登录/退出生命周期保持 info 及以上。 */\nfunction logBootInfo(qq: QqInstallInfo, cfgDir: string): void {\n    logger.debug({ qqVersion: qq.version, qqPath: qq.qqPath, source: qq.source }, \"QQ 文件来源\");\n    logger.debug({ dataDir: cfgDir }, \"数据目录\");\n    logger.debug(\"自建宿主引导（标准 node + stub QQNT.dll）\");\n}\n\n/** 自建宿主启动上下文（参数聚合，避免长参数表）。 */\ninterface SelfHostLaunchContext {\n    opts: BootOptions;\n    qq: QqInstallInfo;\n    cfgDir: string;\n    dataRoot: string;\n    entries: PackageEntries;\n    stubDir: string;\n}\n\n/** launchSelfHost 调用参数构造（唯一启动路径：自建宿主，2026-08-07 用户拍板）。\n * configPath：全局配置文件（项目根 napuketto.toml），注入 NAPKETTO_CONFIG 供装配链读取；\n *   内联配置生效（NAPKETTO_CONFIG_JSON）时不解析、不注入——子进程经 env 继承\n *   内联文本，装配链按同一优先级读取；避免项目根探测出无关路径注入孙进程。\n * extraEnv：传播有效控制台渲染决策（子进程 stdout 恒 pipe，TTY 判定失真）+\n *   数据根（NAPUTO_DATA_ROOT，self-host 停止哨兵目录）。\n * cwd：子进程 cwd 指向数据根——QQ 原生层 fallback 落盘（guild1.db 等）落在专门\n *   的数据目录，不污染项目根（实测 08-07）。 */\nfunction buildLaunchOptions(ctx: SelfHostLaunchContext): LaunchOptions {\n    const { opts, qq, cfgDir, dataRoot, entries, stubDir } = ctx;\n    return {\n        qq,\n        kernelEntry: entries.kernelEntry,\n        adapterEntry: entries.adapterEntry,\n        networkEntry: entries.networkEntry,\n        cfgDir,\n        cwd: dataRoot,\n        ...(isInlineConfigActive() ? {} : { configPath: resolveConfigPath({ dataRoot }) }),\n        selfHost: true,\n        stdio: [\"inherit\", \"pipe\", \"pipe\"],\n        extraEnv: {\n            ...effectiveConsoleEnv(resolveCliLogConfig(opts.dataDir)),\n            NAPUTO_DATA_ROOT: dataRoot,\n        },\n        ...(opts.qq !== undefined ? { quickUin: opts.qq } : {}),\n        stubDir,\n    };\n}\n\n/** 启动自建宿主子进程（包入口解析 → stub 目录 → 启动信息 → launchSelfHost）。\n * ⚠️ P2（2026-08-12）：launchSelfHost 变 async（linux 场景需下载 win-node）。 */\nasync function startSelfHost(\n    opts: BootOptions,\n    qq: QqInstallInfo,\n    cfgDir: string,\n    dataRoot: string,\n): Promise<LaunchResult> {\n    const entries = await resolvePackageEntries();\n    const stubDir = resolveStubDir(opts);\n    logBootInfo(qq, cfgDir);\n    return await launchSelfHost(\n        buildLaunchOptions({ opts, qq, cfgDir, dataRoot, entries, stubDir }),\n    );\n}\n\n/** 接管子进程 stdout/stderr：过滤 MMKV / 符号查找失败等原生噪音，其余转发。 */\nfunction forwardChildOutput(child: ChildProcess): void {\n    if (child.stdout !== null) {\n        forwardFiltered(child.stdout, process.stdout);\n    }\n    if (child.stderr !== null) {\n        forwardFiltered(child.stderr, process.stderr);\n    }\n}\n\n/** 单账号运行时状态落盘（napuketto status/stop 消费，2026-09-08 T8；\n * pid 记 boot 进程——树杀连带 self-host 孙进程）。 */\nfunction recordRuntimeState(\n    dataRoot: string,\n    account: string,\n    child: ChildProcess,\n    status: \"running\" | \"exited\",\n    exitCode?: number | null,\n): void {\n    writeAccountRuntime(dataRoot, {\n        uin: account,\n        pid: process.pid,\n        ...(child.pid !== undefined ? { selfHostPid: child.pid } : {}),\n        startedAt: new Date().toISOString(),\n        kind: \"single-boot\",\n        status,\n        ...(exitCode !== undefined ? { exitCode } : {}),\n    });\n}\n\n/** 优雅关停编排（2026-10-25 生命周期契约）：触发后等 self-host 经自身哨兵/信号\n * 处理自行退出（exit 0），10s 未退则 kill 兜底（Windows 下为硬杀）——\n * boot 进程随后随 child 退出自然返回（退出码 0 = 请求式正常退出）。\n * @returns 「是否已收到停止请求」查询（退出日志 graceful 标注） */\nfunction installGracefulStop(\n    child: ChildProcess,\n    dataRoot: string,\n    account: string,\n): () => boolean {\n    let stopArmed = false;\n    const killIfHung = (): void => {\n        if (child.exitCode !== null || child.killed) {\n            return;\n        }\n        logger.warn({ account }, \"自建宿主未在限时内退出，强制结束\");\n        child.kill();\n    };\n    const armGracefulStop = (reason: string): void => {\n        if (stopArmed) {\n            return;\n        }\n        stopArmed = true;\n        logger.info({ account, reason }, \"收到停止请求，等待自建宿主退出\");\n        const fallback = setTimeout(killIfHung, GRACEFUL_STOP_TIMEOUT_MS);\n        fallback.unref?.();\n    };\n    watchStopSentinel({ dataRoot, account, onTrigger: () => armGracefulStop(\"停止哨兵\") });\n    const onSignal = (signal: string): void => {\n        // 写哨兵覆盖非控制台信号场景（self-host 同目录观察同一文件）；终端\n        // Ctrl+C 下 self-host 也会直接收到 SIGINT，双路径收敛\n        writeStopSentinel(dataRoot, account);\n        armGracefulStop(`信号 ${signal}`);\n    };\n    process.on(\"SIGINT\", () => onSignal(\"SIGINT\"));\n    process.on(\"SIGTERM\", () => onSignal(\"SIGTERM\"));\n    process.on(\"SIGBREAK\", () => onSignal(\"SIGBREAK\"));\n    return () => stopArmed;\n}\n\n/** 常驻：等待自建宿主进程退出（exit / error 两路径均 resolve，去留由 self-host 决定）。 */\nasync function waitSelfHostExit(\n    child: ChildProcess,\n    dataRoot: string,\n    account: string,\n    isStopping: () => boolean,\n): Promise<void> {\n    await new Promise<void>((resolve) => {\n        child.on(\"exit\", (code) => {\n            logger.info({ code, graceful: isStopping() }, \"自建宿主进程退出\");\n            recordRuntimeState(dataRoot, account, child, \"exited\", code);\n            resolve();\n        });\n        child.on(\"error\", (err) => {\n            logger.error({ err }, \"自建宿主进程启动失败\");\n            resolve();\n        });\n    });\n}\n\n/** 启动单个账号（自建宿主 + 常驻）。 */\nexport async function runSingleAccount(opts: BootOptions = {}): Promise<void> {\n    const dataRoot = resolveDataRoot(opts.dataDir);\n    const qq = await locateQqFiles(dataRoot, opts);\n    if (qq === undefined) {\n        return;\n    }\n    const account = opts.qq ?? \"default\";\n    const cfgDir = path.join(dataRoot, account);\n    if (!ensureInstanceLockFree(cfgDir)) {\n        return;\n    }\n    const { child } = await startSelfHost(opts, qq, cfgDir, dataRoot);\n    forwardChildOutput(child);\n    recordRuntimeState(dataRoot, account, child, \"running\");\n    const isStopping = installGracefulStop(child, dataRoot, account);\n    await waitSelfHostExit(child, dataRoot, account, isStopping);\n}\n","/**\n * supervisor：多账号子进程编排（P6，2026-08-05；2026-08-07 自建宿主唯一）\n *\n * 多账号走多进程（ADR-015）：每账号一个独立子进程（node <入口> -q <uin>\n * --data-dir <dataRoot> [--stub-dir <dir>]，复用单账号 runSingleAccount 零改动），\n * 本模块作为父进程：\n *   - 拉起：主配置 accounts（supervisor 子命令）或显式 -q 列表\n *   - 守护：账号异常退出且 autoRestart → 延迟重启\n *   - 信号转发：SIGINT/SIGTERM → 停止全部子进程 → 父进程退出\n */\nimport { type ChildProcess, spawn } from \"node:child_process\";\nimport process from \"node:process\";\nimport { createInterface } from \"node:readline\";\nimport { EXIT_CONFIG_INVALID, resolveDataRoot } from \"@napuketto/kernel\";\nimport { watchStopSentinel, writeStopSentinel } from \"@napuketto/loader\";\nimport {\n    type CliAccountConfig,\n    type CliConfig,\n    DEFAULT_RESTART_DELAY_MS,\n} from \"../config/schema.js\";\nimport { loadCliConfigWithSource } from \"../config/store.js\";\nimport {\n    effectiveConsoleEnv,\n    effectiveConsoleFormat,\n    logger,\n    resolveCliLogConfig,\n} from \"../logger.js\";\nimport { writeAccountRuntime, writeSupervisorRuntime } from \"./state.js\";\n\n/** 退出轮询间隔（毫秒）。 */\nconst EXIT_POLL_MS = 100;\n/** 子进程优雅退出时限（毫秒）：哨兵/信号后子进程自行停止，超时强杀兜底。 */\nconst FORCE_EXIT_MS = 8000;\n\n/** supervisor 选项。 */\nexport interface SupervisorOptions {\n    /** 数据根目录。 */\n    dataDir?: string;\n    /** 显式账号列表（-q A -q B），优先于主配置 accounts。 */\n    qqs?: string[];\n    /** stub QQNT.dll 目录（自建宿主 PATH 前置，透传给子进程 --stub-dir）。 */\n    stubDir?: string;\n}\n\n/** 解析账号列表（显式 -q 优先，否则主配置 accounts 过滤启用项）。 */\nfunction resolveAccounts(opts: SupervisorOptions, config: CliConfig): CliAccountConfig[] {\n    if (opts.qqs !== undefined && opts.qqs.length > 0) {\n        return opts.qqs.map((qq) => ({ qq }));\n    }\n    return config.accounts.filter((acct) => acct.enabled !== false);\n}\n\n/** 解析重启延迟（显式 -q 用默认，主配置场景用配置值）。 */\nfunction resolveRestartDelay(opts: SupervisorOptions, config: CliConfig): number {\n    if (opts.qqs === undefined) {\n        return config.restartDelayMs;\n    }\n    return DEFAULT_RESTART_DELAY_MS;\n}\n\n/** 监督上下文（startAccount / stopAll 共享，避免闭包过长）。 */\ninterface SupervisorCtx {\n    dataRoot: string;\n    entry: string;\n    restartDelayMs: number;\n    autoRestart: boolean;\n    stubDir?: string;\n    children: Map<string, ChildProcess>;\n    /** 每账号守护重启计数（写 runtime.json 用）。 */\n    restartCounts: Map<string, number>;\n    /** 子进程追加 env（NO_BANNER + 渲染决策传播）。 */\n    childEnv: Record<string, string>;\n    /** pretty 模式才加 [uin] 前缀转发（single-line/json 记录自带 account 字段）。 */\n    prefixEnabled: boolean;\n    isStopping: () => boolean;\n}\n\n/**\n * 子进程输出前缀转发（stdout/stderr 逐行）：pretty 模式加 `[uin] ` 前缀\n * （pino 行结构化保留在行内）；single-line/json 模式记录自身已带结构化\n * account 字段（json 加前缀会破坏逐行 JSON.parse），原样透传。\n */\nfunction forwardPrefixed(\n    stream: NodeJS.ReadableStream | null,\n    uin: string,\n    prefixEnabled: boolean,\n): void {\n    if (stream === null) {\n        return;\n    }\n    const rl = createInterface({ input: stream });\n    rl.on(\"line\", (line) => {\n        process.stdout.write(prefixEnabled ? `[${uin}] ${line}\\n` : `${line}\\n`);\n    });\n}\n\n/** 启动一个账号子进程（exit 后按 autoRestart 守护重启）。 */\nfunction startAccount(ctx: SupervisorCtx, acct: CliAccountConfig): void {\n    if (ctx.isStopping()) {\n        return;\n    }\n    const restartCount = ctx.restartCounts.get(acct.qq) ?? 0;\n    // 引导细节（2026-10-25 级别重分配）：账号上线由子进程登录日志报告，此处降 debug\n    logger.debug({ qq: acct.qq, pid: process.pid, restartCount }, \"启动账号\");\n    const args = [ctx.entry, \"-q\", acct.qq, \"--data-dir\", ctx.dataRoot];\n    if (ctx.stubDir !== undefined) {\n        args.push(\"--stub-dir\", ctx.stubDir);\n    }\n    // stdio 管道化（2026-09-08 T8）：逐行前缀转发（多账号输出可辨别），\n    // 替代 inherit——结构化状态（runtime.json：pid/启动时间/重启计数）同步落盘。\n    // env：banner 由 supervisor 统一打（每树至多一次），子进程注入 NO_BANNER；\n    // 渲染决策（format/colorize）按本进程最终控制台形态传播（子进程 stdout 恒 pipe）。\n    const child = spawn(process.execPath, args, {\n        stdio: [\"inherit\", \"pipe\", \"pipe\"],\n        env: {\n            ...process.env,\n            NAPUKETTO_NO_BANNER: \"1\",\n            ...ctx.childEnv,\n        },\n    });\n    forwardPrefixed(child.stdout, acct.qq, ctx.prefixEnabled);\n    forwardPrefixed(child.stderr, acct.qq, ctx.prefixEnabled);\n    ctx.children.set(acct.qq, child);\n    writeAccountRuntime(ctx.dataRoot, {\n        uin: acct.qq,\n        pid: child.pid ?? 0,\n        startedAt: new Date().toISOString(),\n        kind: \"supervisor-child\",\n        status: \"running\",\n        restartCount,\n    });\n    child.on(\"exit\", (code, signal) => {\n        ctx.children.delete(acct.qq);\n        logger.info({ qq: acct.qq, code, signal: signal ?? \"none\" }, \"账号退出\");\n        if (code === EXIT_CONFIG_INVALID) {\n            // 配置校验失败（2026-10-25 退出码契约）：配置不修，重启无意义——\n            // 不进守护重启，落 runtime exited 供 status 消费。\n            logger.error({ qq: acct.qq, code }, \"账号因配置校验失败退出（78），不自动重启\");\n            writeAccountRuntime(ctx.dataRoot, {\n                uin: acct.qq,\n                pid: child.pid ?? 0,\n                startedAt: new Date().toISOString(),\n                kind: \"supervisor-child\",\n                status: \"exited\",\n                exitCode: code,\n                restartCount,\n            });\n            return;\n        }\n        if (!ctx.isStopping() && ctx.autoRestart) {\n            // 守护：延迟重启（关闭信号到达前无限重试，由 SIGINT/SIGTERM 终止）\n            ctx.restartCounts.set(acct.qq, restartCount + 1);\n            setTimeout(() => {\n                startAccount(ctx, acct);\n            }, ctx.restartDelayMs);\n        } else {\n            writeAccountRuntime(ctx.dataRoot, {\n                uin: acct.qq,\n                pid: child.pid ?? 0,\n                startedAt: new Date().toISOString(),\n                kind: \"supervisor-child\",\n                status: \"exited\",\n                exitCode: code,\n                restartCount,\n            });\n        }\n    });\n    child.on(\"error\", (err) => {\n        const { message } = err;\n        logger.error({ qq: acct.qq, err }, `账号启动失败: ${message}`);\n        ctx.children.delete(acct.qq);\n    });\n}\n\n/** 停止全部子进程，全部退出后父进程退出（2026-10-25 优雅化）。\n *\n * 优雅路径：写停止哨兵（all）→ 子进程链（boot / self-host）自行有序退出 →\n * 全部退出后 exit 0（退出码契约：0 = 请求式正常退出）。超时（FORCE_EXIT_MS）\n * 未退的子进程 kill 兜底（Windows 下为硬杀）后仍 exit 0——关停请求本身是正常路径，\n * 与崩溃（非 0）区分是契约的核心目标。\n */\nfunction stopAll(ctx: SupervisorCtx): void {\n    logger.info(\"收到退出信号，停止全部账号\");\n    writeStopSentinel(ctx.dataRoot, \"all\");\n    // 超时兜底：子进程不响应（自建宿主卡死等）时强杀残留，父进程不再死等\n    const forceTimer = setTimeout(() => {\n        for (const child of ctx.children.values()) {\n            child.kill();\n        }\n        process.exit(0);\n    }, FORCE_EXIT_MS);\n    forceTimer.unref?.();\n    const wait = setInterval(() => {\n        if (ctx.children.size === 0) {\n            clearInterval(wait);\n            clearTimeout(forceTimer);\n            process.exit(0);\n        }\n    }, EXIT_POLL_MS);\n}\n\n/** 运行 supervisor（多账号编排）。 */\nexport async function runSupervisor(opts: SupervisorOptions = {}): Promise<void> {\n    const dataRoot = resolveDataRoot(opts.dataDir);\n    // 内联优先（NAPKETTO_CONFIG_JSON > 文件）；校验失败 ConfigError → exit 78\n    const { config } = await loadCliConfigWithSource(\n        opts.dataDir !== undefined ? { dataDir: opts.dataDir } : {},\n    );\n    const accounts = resolveAccounts(opts, config);\n    if (accounts.length === 0) {\n        logger.warn(\"supervisor：没有启用的账号（主配置 accounts 为空或全部禁用）\");\n        return;\n    }\n    const restartDelayMs = resolveRestartDelay(opts, config);\n    const [, entry = \"\"] = process.argv;\n    const children = new Map<string, ChildProcess>();\n    const restartCounts = new Map<string, number>();\n    let stopping = false;\n    // 渲染决策：按本进程最终控制台形态解析（[log] 配置 + TTY），传播给子进程\n    const logCfg = resolveCliLogConfig(opts.dataDir);\n    const ctx: SupervisorCtx = {\n        dataRoot,\n        entry,\n        restartDelayMs,\n        autoRestart: config.autoRestart,\n        ...(opts.stubDir !== undefined ? { stubDir: opts.stubDir } : {}),\n        children,\n        restartCounts,\n        childEnv: effectiveConsoleEnv(logCfg),\n        prefixEnabled: effectiveConsoleFormat(logCfg) === \"pretty\",\n        isStopping: () => stopping,\n    };\n\n    // supervisor 自身状态落盘（napuketto status/stop 消费）\n    writeSupervisorRuntime(dataRoot, {\n        pid: process.pid,\n        startedAt: new Date().toISOString(),\n        accounts: accounts.map((a) => a.qq),\n    });\n\n    for (const acct of accounts) {\n        startAccount(ctx, acct);\n    }\n\n    // 信号转发：停止全部子进程 → 父进程退出。\n    // SIGBREAK = Windows CTRL_BREAK_EVENT（嵌入式宿主 CREATE_NEW_PROCESS_GROUP +\n    // GenerateConsoleCtrlEvent 可优雅停整树）；另接停止哨兵（宿主/脚本写文件即可）。\n    const shutdown = (): void => {\n        if (stopping) {\n            return;\n        }\n        stopping = true;\n        stopAll(ctx);\n    };\n    process.on(\"SIGINT\", shutdown);\n    process.on(\"SIGTERM\", shutdown);\n    process.on(\"SIGBREAK\", shutdown);\n    // supervisor 不持有账号：仅响应 all/空内容哨兵（单账号哨兵由对应 boot/self-host 自行消费）\n    watchStopSentinel({ dataRoot, onTrigger: shutdown });\n\n    // 常驻：直到收到退出信号（stopAll 内 process.exit）\n    await new Promise<void>(() => {\n        // 永不 resolve，由 stopAll 的 process.exit 结束进程\n    });\n}\n","/**\n * 默认动作（无子命令）用例：-q 单账号 / 多 -q supervisor / 无 -q 读配置拉起全部账号。\n *\n * 从 index.ts 拆出（2026-10-25 模块收拢）：这里只做编排，不 import commander；\n * 参数解析、帮助文案与退出码收敛在 cli/program.ts。\n */\nimport { loadCliConfigWithSource } from \"../config/store.js\";\nimport { runSingleAccount } from \"../runtime/boot.js\";\nimport { runSupervisor } from \"../runtime/supervisor.js\";\n\n/** 构造可选 dataDir 参数（exactOptionalPropertyTypes 不允许显式 undefined）。 */\nfunction withDataDir(dataDir: string | undefined): { dataDir?: string } {\n    if (dataDir === undefined) {\n        return {};\n    }\n    return { dataDir };\n}\n\n/** 构造可选 stubDir 参数（同 withDataDir）。 */\nfunction withStubDir(stubDir: string | undefined): { stubDir?: string } {\n    if (stubDir === undefined) {\n        return {};\n    }\n    return { stubDir };\n}\n\n/** 构造可选 qqPath 参数（同 withDataDir）。 */\nfunction withQqPath(qqPath: string | undefined): { qqPath?: string } {\n    if (qqPath === undefined) {\n        return {};\n    }\n    return { qqPath };\n}\n\n/** 主命令已解析参数。 */\nexport interface StartOptions {\n    qq?: string[];\n    dataDir?: string;\n    qqPath?: string;\n    stubDir?: string;\n}\n\n/** 单账号启动分支（-q 单值；构造 bootOptions 后走 runSingleAccount）。 */\nasync function runSingleAccountBranch(opts: StartOptions, qqs: string[]): Promise<void> {\n    const [only] = qqs;\n    if (only === undefined) {\n        return;\n    }\n    await runSingleAccount({\n        qq: only,\n        ...withDataDir(opts.dataDir),\n        ...withQqPath(opts.qqPath),\n        ...withStubDir(opts.stubDir),\n    });\n}\n\n/** 无 -q 时：读全局配置 accounts（账号必填，2026-08-08 拍板），supervisor 拉起全部启用账号。\n * 不再有「配置为空 → 交互式单账号登录」老路径：缺账号直接报错提示编辑模板。\n * 配置加载内联优先（NAPKETTO_CONFIG_JSON > 文件）；校验失败 ConfigError → exit 78。 */\nasync function autoStart(opts: StartOptions): Promise<void> {\n    const { config } = await loadCliConfigWithSource(withDataDir(opts.dataDir));\n    if (config.accounts.length === 0) {\n        // parseCliConfig 已强制至少一个，此处防御\n        throw new Error(\"主配置没有账号，请编辑 napuketto.toml 填写 [[accounts]] 段\");\n    }\n    await runSupervisor({ ...withDataDir(opts.dataDir), ...withStubDir(opts.stubDir) });\n}\n\n/** 主命令分发：无 -q 读配置 supervisor 拉起 / 单 -q 单账号 / 多 -q supervisor。 */\nexport async function dispatchMainAction(opts: StartOptions): Promise<void> {\n    const qqs = opts.qq ?? [];\n    if (qqs.length === 0) {\n        await autoStart(opts);\n        return;\n    }\n    if (qqs.length === 1) {\n        await runSingleAccountBranch(opts, qqs);\n        return;\n    }\n    await runSupervisor({ qqs, ...withDataDir(opts.dataDir), ...withStubDir(opts.stubDir) });\n}\n\n/** supervisor 子命令用例（读主配置 accounts 批量拉起；-d 复用主命令 option）。 */\nexport async function runSupervisorCommand(opts: { dataDir?: string }): Promise<void> {\n    await runSupervisor(withDataDir(opts.dataDir));\n}\n","/**\n * CLI 动作错误出口（2026-10-25 退出码契约）：\n *   0 = 请求式优雅关停（0.2.0 已有，不经此路径）；78 = 配置校验失败\n *   （ConfigError 一族，宿主据此区分「配置未就绪」与运行时崩溃，免重启）；\n *   其余 = 1（运行时崩溃，现状不变）。\n *\n * 退出码只认错误类型（instanceof ConfigError），与日志文案完全解耦——\n * 文案是人读的，退出码是宿主消费的机器契约。\n */\nimport process from \"node:process\";\nimport { ConfigError, EXIT_CONFIG_INVALID } from \"@napuketto/kernel\";\nimport { logger } from \"../logger.js\";\n\n/** 统一错误输出（结构化日志，错误对象经 pino serializer 带堆栈）。 */\nfunction reportError(err: unknown): void {\n    let message = String(err);\n    if (err instanceof Error) {\n        const { message: errMessage } = err;\n        message = errMessage;\n    }\n    logger.error({ err }, message);\n}\n\n/** 统一 catch 出口：打印错误并按类型设置进程退出码（78 = 配置校验失败）。 */\nexport function handleActionError(err: unknown): void {\n    reportError(err);\n    process.exitCode = err instanceof ConfigError ? EXIT_CONFIG_INVALID : 1;\n}\n","/**\n * commander 装配层：全局选项、banner、子命令注册、默认动作分发。\n *\n * 从 index.ts 拆出（2026-10-25 模块收拢）：只做 CLI 契约适配（参数/帮助/输出/\n * 退出码），用例实现见 commands/。禁止在此写业务逻辑。\n */\nimport process from \"node:process\";\nimport { resolveDataRoot } from \"@napuketto/kernel\";\nimport { Command } from \"commander\";\nimport {\n    cmdConfigApply,\n    cmdConfigInit,\n    cmdConfigList,\n    cmdConfigValidate,\n} from \"../commands/config.js\";\nimport { cmdRestart, cmdStatus, cmdStop } from \"../commands/ops.js\";\nimport { dispatchMainAction, runSupervisorCommand } from \"../commands/start.js\";\nimport { resolveCliLogConfig } from \"../logger.js\";\nimport { handleActionError } from \"./error.js\";\n\n/** commander collect：累积 -q 多值。 */\nfunction collectQq(value: string, prev: string[]): string[] {\n    prev.push(value);\n    return prev;\n}\n\n/** 启动字符画（NapukettoQQ 品牌标识，内嵌；art 含反引号/反斜杠，用数组逐行转义）。 */\nconst BANNER = [\n    \"    _   __                  __        __  __        ____  ____ \",\n    \"   / | / /___ _____  __  __/ /_____  / /_/ /_____  / __ \\\\/ __ \\\\\",\n    \"  /  |/ / __ `/ __ \\\\/ / / / //_/ _ \\\\/ __/ __/ __ \\\\/ / / / / / /\",\n    \" / /|  / /_/ / /_/ / /_/ / ,< /  __/ /_/ /_/ /_/ / /_/ / /_/ / \",\n    \"/_/ |_/\\\\__,_/ .___/\\\\__,_/_/|_|\\\\___/\\\\__/\\\\__/\\\\____/\\\\___\\\\_\\\\___\\\\_\\\\ \",\n    \"           /_/                                                 \",\n].join(\"\\n\");\n\n/** 读主命令已解析的 data-dir（-d 定义在主命令，子命令经此共享）。 */\nfunction rootDataDir(program: Command): { dataDir?: string } {\n    const { dataDir } = program.opts<{ dataDir?: string }>();\n    return dataDir === undefined ? {} : { dataDir };\n}\n\n/** 注册 config 子命令（init/list/apply，P6；-d 复用主命令 option）。 */\nfunction registerConfigCommands(program: Command): void {\n    const configCmd = program.command(\"config\").description(\"全局配置管理（napuketto.toml）\");\n    configCmd\n        .command(\"init\")\n        .description(\"生成默认全局配置\")\n        .action(async () => {\n            try {\n                await cmdConfigInit(rootDataDir(program));\n            } catch (err) {\n                handleActionError(err);\n            }\n        });\n    configCmd\n        .command(\"list\")\n        .description(\"列出全局配置与账号配置\")\n        .action(async () => {\n            try {\n                await cmdConfigList(rootDataDir(program));\n            } catch (err) {\n                handleActionError(err);\n            }\n        });\n    configCmd\n        .command(\"apply <file>\")\n        .description(\"应用外部配置（TOML/JSON，校验后写回全局配置）\")\n        .action(async (file: string) => {\n            try {\n                await cmdConfigApply(file, rootDataDir(program));\n            } catch (err) {\n                handleActionError(err);\n            }\n        });\n    // config validate（2026-10-25）：宿主拉起前预检；exit 0 合法 / 78 校验失败\n    // （与运行时同一校验器与错误文案）/ 1 用法错误。纯只读（文件缺失不落模板）。\n    configCmd\n        .command(\"validate\")\n        .description(\n            \"校验配置（--config <path> / --config-json <json> 二选一；无参 = 校验生效配置）\",\n        )\n        .option(\"--config <path>\", \"待校验配置文件路径（.toml/.json 按扩展名解析）\")\n        .option(\"--config-json <json>\", \"待校验内联配置 JSON 文本\")\n        .action(async (opts: { config?: string; configJson?: string }) => {\n            try {\n                const result = await cmdConfigValidate({\n                    configPath: opts.config,\n                    configJson: opts.configJson,\n                    ...rootDataDir(program),\n                });\n                // 校验结果为功能输出（宿主 grep 消费），保持原样 stdout 单行\n                process.stdout.write(\n                    result.source === \"inline\"\n                        ? \"配置校验通过（来源: inline）\\n\"\n                        : `配置校验通过（来源: file ${result.path}）\\n`,\n                );\n            } catch (err) {\n                handleActionError(err);\n            }\n        });\n}\n\n/** 注册 supervisor 子命令（读主配置 accounts 批量拉起，P6；-d 复用主命令 option）。 */\nfunction registerSupervisorCommand(program: Command): void {\n    program\n        .command(\"supervisor\")\n        .description(\"多账号编排（读全局配置 accounts 拉起子进程）\")\n        .action(async () => {\n            try {\n                await runSupervisorCommand(rootDataDir(program));\n            } catch (err) {\n                handleActionError(err);\n            }\n        });\n}\n\n/** 运维子命令公共壳：解析数据根 + 可选 -q 参数，统一 handleActionError 出口。 */\nfunction opsAction(\n    program: Command,\n    run: (dataRoot: string, arg: { qq?: string }) => void | Promise<void>,\n): (opts: { qq?: string }) => Promise<void> {\n    return async (opts) => {\n        try {\n            const dataRoot = resolveDataRoot(rootDataDir(program).dataDir);\n            await run(dataRoot, opts.qq !== undefined ? { qq: opts.qq } : {});\n        } catch (err) {\n            handleActionError(err);\n        }\n    };\n}\n\n/** 注册运维子命令（status/stop/restart，2026-09-08 T8；-q 复用主命令 option）。 */\nfunction registerOpsCommands(program: Command): void {\n    program\n        .command(\"status\")\n        .description(\"查看各账号运行状态（读 runtime.json + 进程存活检测）\")\n        .option(\"-q, --qq <uin>\", \"只看指定账号\")\n        .action(opsAction(program, (dataRoot, arg) => cmdStatus(dataRoot, arg)));\n    program\n        .command(\"stop\")\n        .description(\n            \"停止账号进程树（无 -q 停 supervisor 全部；-q 停单账号，supervisor 守护时会自动拉起）\",\n        )\n        .option(\"-q, --qq <uin>\", \"目标账号（缺省停 supervisor + 全部账号）\")\n        .action(opsAction(program, (dataRoot, arg) => cmdStop(dataRoot, arg)));\n    program\n        .command(\"restart\")\n        .description(\"重启账号（无 -q 重启 supervisor 全量；-q 重启单账号；detached 拉起）\")\n        .option(\"-q, --qq <uin>\", \"目标账号（缺省重启 supervisor 全量）\")\n        .action(opsAction(program, (dataRoot, arg) => cmdRestart(dataRoot, arg)));\n}\n\n/** 注册主命令 action（-q 单账号 / 多 -q supervisor / 无 -q 读配置 supervisor 拉起）。 */\nfunction registerMainAction(program: Command): void {\n    program.action(\n        async (opts: { qq?: string[]; dataDir?: string; qqPath?: string; stubDir?: string }) => {\n            try {\n                await dispatchMainAction(opts);\n            } catch (err) {\n                handleActionError(err);\n            }\n        },\n    );\n}\n\n/** 入口：注册全部子命令与主命令后解析。 */\nexport function main(): void {\n    const program = new Command();\n    program\n        .name(\"napuketto\")\n        .version(\"0.0.1\")\n        .description(\"NapukettoQQ 机器人框架（OneBot 11 兼容）\");\n\n    program\n        .option(\n            \"-q, --qq <uin>\",\n            \"QQ 号（可重复；多个时 supervisor 拉起多账号子进程）\",\n            collectQq,\n            [],\n        )\n        .option(\"-d, --data-dir <dir>\", \"数据根目录（缺省 <项目根>/.napuketto）\")\n        .option(\"--qq-path <path>\", \"QQ 安装路径（联调覆盖）\")\n        .option(\n            \"--stub-dir <dir>\",\n            \"stub QQNT.dll 目录（自建宿主 PATH 前置，缺省 loader/native/stub-test-env，Git Submodule）\",\n        );\n\n    // 启动字符画（每次 cli 启动、首个 action 前打印；受 [log].banner / NAPUKETTO_NO_BANNER\n    // 控制——supervisor 派生的子进程被注入 NO_BANNER，每树至多一次）。preAction 时机\n    // 才能拿到已解析的 -d 数据根（banner 决策需读对配置文件）。\n    program.hook(\"preAction\", () => {\n        const cfg = resolveCliLogConfig(rootDataDir(program).dataDir);\n        if (cfg.banner) {\n            process.stdout.write(`${BANNER}\\n`);\n        }\n    });\n\n    registerConfigCommands(program);\n    registerSupervisorCommand(program);\n    registerOpsCommands(program);\n    registerMainAction(program);\n\n    program.parse(process.argv);\n}\n","#!/usr/bin/env node\n\n/**\n * @napuketto/cli 入口（P2-6 + P6，2026-08-05；2026-08-07 用户拍板：只保留自建宿主；\n * 2026-08-08 配置结构拍板：账号必填，协议配置嵌在账号内）\n *\n * commander 参数解析：\n *   - 单账号：-q <uin> → runSingleAccount（自建宿主：标准 node + stub QQNT.dll，不拉起 QQ）\n *   - 多账号：-q A -q B 或 supervisor 子命令 → runSupervisor（子进程编排）\n *   - 无 -q：读全局配置 accounts（至少一个，账号必填）→ supervisor 拉起全部启用账号\n *   - config 子命令：init / list / apply / validate（主配置管理）\n *   - 退出码契约（2026-10-25）：0 = 请求式优雅关停；78 = 配置校验失败（ConfigError\n *     一族，宿主消费，免重启）；其余错误 = 1（handleActionError 统一出口）\n *\n * 路线 B（拉起 QQ + 注入）已淘汰（2026-08-07 用户拍板），相关入口已移除。\n *\n * 2026-10-25 模块收拢：本文件只保留进程入口；commander 装配在 cli/program.ts，\n * 用例在 commands/，配置领域在 config/，运行期在 runtime/。\n */\nimport { main } from \"./cli/program.js\";\n\nmain();\n"],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;AAaA,MAAa,4BAA4B,CAAC,UAAU,QAAQ;;AAG5D,MAAM,uBAAuB;;AAE7B,MAAa,2BAA2B;;AAGxC,MAAM,kBAAkB;;AAkCxB,SAAS,qBACL,KACA,KACmC;CACnC,MAAM,UAAU,IAAI;CACpB,IAAI,YAAY,KAAA,GACZ;CAEJ,IAAI,OAAO,YAAY,YAAY,YAAY,MAC3C,MAAM,YAAY,SAAS,IAAI,QAAQ;CAE3C,OAAO;AACX;;;;;;AAOA,SAAS,aAAa,KAAsC;CACxD,IAAI,IAAI,eAAe,KAAA,GACnB,OAAO,gBAAgB;CAE3B,IAAI,OAAO,IAAI,eAAe,YAAY,IAAI,eAAe,IACzD,MAAM,YAAY,sBAAsB;CAE5C,OAAO,IAAI;AACf;;AAGA,SAAS,iBAAiB,KAAuC;CAC7D,IAAI,IAAI,mBAAmB,KAAA,GACvB,OAAO;CAEX,IAAI,OAAO,IAAI,mBAAmB,WAC9B,MAAM,YAAY,wBAAwB;CAE9C,OAAO,IAAI;AACf;;AAGA,SAAS,oBAAoB,KAAsC;CAC/D,IAAI,IAAI,sBAAsB,KAAA,GAC1B,OAAO;CAEX,IACI,OAAO,IAAI,sBAAsB,YACjC,CAAC,OAAO,UAAU,IAAI,iBAAiB,KACvC,IAAI,qBAAqB,GAEzB,MAAM,YAAY,2BAA2B;CAEjD,OAAO,IAAI;AACf;;AAGA,SAAS,cAAc,KAAkD;CACrE,IAAI,IAAI,gBAAgB,KAAA,GACpB,MAAM,YACF,2CACJ;CAEJ,IAAI,CAAC,MAAM,QAAQ,IAAI,WAAW,KAAK,IAAI,WAAW,CAAC,WAAW,GAC9D,MAAM,YACF,mDACJ;CAEJ,MAAM,WAA+B,CAAC;CACtC,KAAK,MAAM,QAAQ,IAAI,aACnB,SAAS,KAAK,aAAa,IAAI,CAAC;CAEpC,OAAO;AACX;;AAGA,SAAS,eAAe,KAAsC;CAC1D,MAAM,KAAK,IAAI;CACf,IAAI,OAAO,OAAO,YAAY,OAAO,IACjC,MAAM,YAAY,cAAc;CAEpC,oBAAoB,EAAE;CACtB,OAAO;AACX;;AAGA,SAAS,oBAAoB,IAAkB;CAC3C,IAAI,CAAC,gBAAgB,KAAK,EAAE,GACxB,MAAM,YAAY,6BAA6B;CAEnD,IAAI,0BAA0B,MAAM,gBAAgB,gBAAgB,EAAE,GAClE,MAAM,YACF,aAAa,GAAG,8BACpB;AAER;;AAGA,SAAS,oBAAoB,KAAuB,SAAwB;CACxE,IAAI,YAAY,KAAA,GACZ;CAEJ,IAAI,OAAO,YAAY,WACnB,MAAM,YAAY,sBAAsB;CAE5C,IAAI,UAAU;AAClB;;AAGA,SAAS,sBAAsB,KAA8B,KAA6B;CACtF,MAAM,WAAW,qBAAqB,KAAK,UAAU;CACrD,IAAI,aAAa,KAAA,GACb,IAAI,WAAW;CAEnB,MAAM,SAAS,qBAAqB,KAAK,QAAQ;CACjD,IAAI,WAAW,KAAA,GACX,IAAI,SAAS;CAEjB,MAAM,UAAU,qBAAqB,KAAK,SAAS;CACnD,IAAI,YAAY,KAAA,GACZ,IAAI,UAAU;CAElB,MAAM,QAAQ,qBAAqB,KAAK,OAAO;CAC/C,IAAI,UAAU,KAAA,GACV,IAAI,QAAQ;AAEpB;;AAGA,SAAS,aAAa,MAAiC;CACnD,IAAI,OAAO,SAAS,YAAY,SAAS,MACrC,MAAM,YAAY,sBAAsB;CAE5C,MAAM,MAAM;CACZ,MAAM,MAAwB,EAAE,IAAI,eAAe,GAAG,EAAE;CACxD,oBAAoB,KAAK,IAAI,UAAU;CACvC,sBAAsB,KAAK,GAAG;CAC9B,OAAO;AACX;;;;;AAMA,SAAS,qBAAqB,KAA2B;CACrD,MAAM,EAAE,QAAQ,GAAG,SAAS;CAC5B,OAAO,WAAW,KAAA,IAAY,OAAO;EAAE,GAAG;EAAM;CAAO;AAC3D;;;;;AAMA,SAAS,gBAAgB,OAA2B;CAChD,IAAI;EACA,OAAO,eAAe,KAAK;CAC/B,SAAS,KAAK;EACV,MAAM,SAAS,eAAe,QAAQ,IAAI,UAAU,OAAO,GAAG;EAC9D,MAAM,YAAY,kBAAkB,UAAU,EAAE,OAAO,IAAI,CAAC;CAChE;AACJ;;AAGA,SAAgB,eAAe,OAA2B;CACtD,IAAI,OAAO,UAAU,YAAY,UAAU,MACvC,MAAM,YAAY,UAAU;CAEhC,MAAM,MAAM;CACZ,MAAM,UAAU,aAAa,GAAG;CAChC,MAAM,cAAc,iBAAiB,GAAG;CACxC,MAAM,iBAAiB,oBAAoB,GAAG;CAC9C,MAAM,WAAW,cAAc,GAAG;CAElC,MAAM,MACF,IAAI,WAAW,KAAA,IAAY,qBAAqB,gBAAgB,IAAI,MAAM,CAAC,IAAI,KAAA;CACnF,OAAO;EACH;EACA;EACA;EACA;EACA,GAAI,QAAQ,KAAA,IAAY,EAAE,IAAI,IAAI,CAAC;CACvC;AACJ;;;;;;;;;;;;;;;;;;;;;;;ACpNA,MAAM,oBAAoB;;;;AAQ1B,SAAgB,uBAA2C;CACvD,MAAM,MAAM,QAAQ,IAAI;CACxB,IAAI,QAAQ,KAAA,KAAa,IAAI,KAAK,MAAM,IACpC;CAEJ,OAAO;AACX;;AAGA,SAAgB,uBAAgC;CAC5C,OAAO,qBAAqB,MAAM,KAAA;AACtC;;AAGA,SAAS,eAAe,OAAqD;CACzE,IAAI,OAAO,UAAU,YAAY,UAAU,QAAQ,MAAM,QAAQ,KAAK,GAClE;CAEJ,OAAO;AACX;;;;;AAMA,SAAS,sBAA2D;CAChE,MAAM,OAAO,qBAAqB;CAClC,IAAI,SAAS,KAAA,GACT;CAEJ,IAAI;EACA,OAAO,eAAe,KAAK,MAAM,IAAI,CAAY;CACrD,QAAQ;EACJ;CACJ;AACJ;;AAGA,SAAgB,wBAAwB,KAAsB;CAC1D,MAAM,MAAM,oBAAoB;CAChC,OAAO,QAAQ,KAAA,IAAY,KAAA,IAAY,IAAI;AAC/C;;AAGA,SAAS,gBAAgB,MAAuC;CAC5D,IAAI;CACJ,IAAI;EACA,MAAM,KAAK,MAAM,IAAI;CACzB,SAAS,KAAK;EACV,MAAM,SAAS,eAAe,QAAQ,IAAI,UAAU,OAAO,GAAG;EAC9D,MAAM,YAAY,mBAAmB,UAAU,EAAE,OAAO,IAAI,CAAC;CACjE;CACA,MAAM,SAAS,eAAe,GAAG;CACjC,IAAI,WAAW,KAAA,GACX,MAAM,YAAY,sCAAsC;CAE5D,OAAO;AACX;;;;;AAMA,SAAgB,kBAAkB,MAAyB;CACvD,OAAO,eAAe,gBAAgB,IAAI,CAAC;AAC/C;;;;;;;;;;;;;;;;ACtEA,IAAI,eAAiC;;AAErC,IAAI,iBAAyB,gBAAgB;;;;AAK7C,SAAgB,oBAAoB,SAA6B;CAC7D,IAAI,iBAAiB,MACjB,OAAO;CAEX,iBAAiB,gBAAgB,OAAO;CACxC,IAAI;CACJ,IAAI,qBAAqB,GAErB,UAAU,wBAAwB,KAAK;MAEvC,IAAI;EACA,MAAM,aAAa,kBAAkB,EAAE,UAAU,eAAe,CAAC;EACjE,UAAU,UAAU,aAAa,YAAY,MAAM,CAAC,CAAC,CAAC;CAC1D,QAAQ;EACJ,UAAU,KAAA;CACd;CAEJ,IAAI;EACA,eAAe,eAAe,SAAS,QAAQ,GAAG;CACtD,QAAQ;EAEJ,eAAe,eAAe,KAAA,GAAW,QAAQ,GAAG;CACxD;CACA,OAAO;AACX;;;;;AAMA,SAAgB,uBAAuB,KAA2B;CAC9D,MAAM,QAAQ,QAAQ,OAAO,UAAU;CACvC,OAAO,IAAI,WAAW,QAAQ,WAAW;AAC7C;;;;;;AAOA,SAAgB,oBAAoB,KAAwC;CACxE,MAAM,QAAQ,QAAQ,OAAO,UAAU;CACvC,MAAM,SAAS,uBAAuB,GAAG;CAEzC,OAAO;EACH,sBAAsB;EACtB,wBAHa,IAAI,aAAa,WAAW,YAAY,SAGlB,MAAM;CAC7C;AACJ;;AAGA,SAAS,mBAAmB,MAAsB;CAC9C,OAAO,WAAW,IAAI,IAAI,OAAO,KAAK,gBAAgB,IAAI;AAC9D;;AAgBA,SAAS,iBAAiB,KAAoD;CAC1E,OAAO;EACH,OAAO,IAAI,OAAO,OAAO,IAAI;EAC7B,QAAQ,IAAI;EACZ,WAAW,IAAI;EACf,UAAU,IAAI;EACd,MAAM,IAAI,SAAS,KAAA,IAAY,mBAAmB,IAAI,KAAK,IAAI,IAAI,KAAA;EACnE,WAAW,IAAI,MAAM;EAGrB,MAAM;GAAE,MAAM;GAAO,SAAS;EAAM;CACxC;AACJ;;AAGA,IAAM,gBAAN,MAAyC;CACrC,SAA2B;CAE3B,UAAqB;EACjB,IAAI,KAAK,WAAW,MAChB,KAAK,SAAS,aAAa,iBAAiB,oBAAoB,CAAC,CAAC;EAEtE,OAAO,KAAK;CAChB;CAEA,KAAK,KAAc,KAAoB;EACnC,KAAK,QAAQ,CAAC,CAAC,KAAK,KAAK,GAAG;CAChC;CACA,KAAK,KAAc,KAAoB;EACnC,KAAK,QAAQ,CAAC,CAAC,KAAK,KAAK,GAAG;CAChC;CACA,MAAM,KAAc,KAAoB;EACpC,KAAK,QAAQ,CAAC,CAAC,MAAM,KAAK,GAAG;CACjC;CACA,MAAM,KAAc,KAAoB;EACpC,KAAK,QAAQ,CAAC,CAAC,MAAM,KAAK,GAAG;CACjC;CACA,MAAM,KAAc,KAAoB;EACpC,KAAK,QAAQ,CAAC,CAAC,MAAM,KAAK,GAAG;CACjC;CACA,MAAM,KAAc,KAAoB;EACpC,KAAK,QAAQ,CAAC,CAAC,MAAM,KAAK,GAAG;CACjC;AACJ;;AAGA,MAAa,SAAoB,IAAI,cAAc;;;;;;;;;;;AC3InD,SAAgB,iBAAyB;CACrC,OAAO;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;QAuDH,0BAA0B,GAAG;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;UA0D3B,0BAA0B,GAAG;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AA2CvC;;;;;;;;;;;;ACpJA,SAAgB,iBAAiB,UAA6B;CAC1D,OAAO;EACH,SAAS;EACT,aAAa;EACb,gBAAgB;EAChB,UAAU,CAAC;CACf;AACJ;;AAGA,eAAe,qBAAqB,MAA6B;CAC7D,IAAI;EACA,MAAM,OAAO,IAAI;CACrB,QAAQ;EACJ,UAAU,QAAQ,IAAI,GAAG,EAAE,WAAW,KAAK,CAAC;EAC5C,MAAM,UAAU,MAAM,GAAG,eAAe,EAAE,KAAK,MAAM;EACrD,OAAO,KAAK,EAAE,KAAK,GAAG,wCAAwC;CAClE;AACJ;;;AAIA,IAAa,iBAAb,cAAoC,WAAsB;CACtD,YAAY,UAAkB;EAC1B,MAAM;GACF,MAAM,kBAAkB,EAAE,SAAS,CAAC;GACpC,QAAQ,EAAE,OAAO,eAAe;GAChC,UAAU,iBAAiB,QAAQ;EACvC,CAAC;CACL;AACJ;;AAGA,eAAe,cAAc,UAAsC;CAC/D,MAAM,QAAQ,IAAI,eAAe,QAAQ;CACzC,MAAM,qBAAqB,MAAM,IAAI;CACrC,OAAO,MAAM,MAAM,KAAK;AAC5B;;;;;AAmBA,SAAgB,uBAAuB,OAA6B,CAAC,GAA4B;CAC7F,MAAM,aAAa,qBAAqB;CACxC,IAAI,eAAe,KAAA,GACf,OAAO;EAAE,QAAQ;EAAU,MAAM;CAAW;CAEhD,MAAM,WAAW,gBAAgB,KAAK,OAAO;CAC7C,OAAO;EAAE,QAAQ;EAAQ,MAAM,kBAAkB,EAAE,SAAS,CAAC;EAAG;CAAS;AAC7E;;AAGA,IAAI,eAAe;;;;;;;AAQnB,eAAsB,wBAClB,OAA6B,CAAC,GACN;CACxB,MAAM,WAAW,uBAAuB,IAAI;CAC5C,IAAI,SAAS,WAAW,UAAU;EAC9B,MAAM,SAAS,kBAAkB,SAAS,IAAI;EAC9C,IAAI,CAAC,cAAc;GACf,eAAe;GACf,OAAO,KAAK,oCAAoC;EACpD;EACA,OAAO;GAAE;GAAQ,QAAQ;EAAS;CACtC;CAEA,OAAO;EAAE,QAAA,MADY,cAAc,SAAS,QAAQ;EACnC,QAAQ;EAAQ,MAAM,SAAS;CAAK;AACzD;;;;ACpDA,SAAS,SAAS,QAA4C;CAC1D,OAAO;AACX;;;;AAKA,eAAsB,cAAc,MAA2C;CAC3E,MAAM,WAAW,gBAAgB,KAAK,OAAO;CAC7C,UAAU,UAAU,EAAE,WAAW,KAAK,CAAC;CACvC,MAAM,QAAQ,IAAI,eAAe,QAAQ;CACzC,IAAI,UAAU;CACd,IAAI;EACA,MAAM,OAAO,MAAM,IAAI;CAC3B,QAAQ;EACJ,UAAU,QAAQ,MAAM,IAAI,GAAG,EAAE,WAAW,KAAK,CAAC;EAClD,MAAM,UAAU,MAAM,MAAM,GAAG,eAAe,EAAE,KAAK,MAAM;EAC3D,UAAU;CACd;CACA,MAAM,MAAM,MAAM,SAAS,MAAM,MAAM,MAAM;CAC7C,OAAO,KAAK,EAAE,SAAS,GAAG,KAAK;CAC/B,IAAI,SACA,OAAO,KAAK,EAAE,MAAM,MAAM,KAAK,GAAG,gCAAgC;MAElE,OAAO,KAAK,EAAE,MAAM,MAAM,KAAK,GAAG,wBAAwB;CAG9D,QAAQ,OAAO,MAAM,GAAG;AAC5B;;AAGA,eAAsB,cAAc,MAA2C;CAC3E,MAAM,WAAW,gBAAgB,KAAK,OAAO;CAC7C,MAAM,QAAQ,IAAI,eAAe,QAAQ;CACzC,MAAM,SAAS,MAAM,MAAM,KAAK;CAChC,OAAO,KAAK,EAAE,SAAS,GAAG,KAAK;CAC/B,OAAO,KAAK,EAAE,MAAM,MAAM,KAAK,GAAG,MAAM;CACxC,QAAQ,OAAO,MAAM,GAAG,cAAc,SAAS,MAAM,CAAC,EAAE,GAAG;CAE3D,IAAI;CACJ,IAAI;EACA,UAAU,YAAY,UAAU,EAAE,eAAe,KAAK,CAAC;CAC3D,QAAQ;EACJ,UAAU,CAAC;CACf;CACA,KAAK,MAAM,SAAS,SAChB,IAAI,MAAM,YAAY,GAClB,mBAAmB,MAAM,MAAM,QAAQ;AAGnD;;AAGA,SAAS,mBAAmB,SAAiB,UAAwB;CACjE,MAAM,YAAY,KAAK,UAAU,SAAS,QAAQ;CAClD,IAAI,QAAkB,CAAC;CACvB,IAAI;EACA,QAAQ,YAAY,SAAS,CAAC,CAAC,QAAQ,MAAM,EAAE,SAAS,OAAO,KAAK,EAAE,SAAS,OAAO,CAAC;CAC3F,QAAQ;EACJ,QAAQ,CAAC;CACb;CACA,IAAI,WAAW;CACf,IAAI,MAAM,SAAS,GACf,WAAW,MAAM,KAAK,IAAI;CAI9B,OAAO,KAAK;EAAE;EAAS,OAAO;CAAS,GAAG,MAAM;AACpD;;AAGA,SAAS,oBAAoB,MAAc,SAA0B;CACjE,IAAI,QAAQ,IAAI,CAAC,CAAC,YAAY,MAAM,SAChC,OAAO,UAAU,OAAO;CAE5B,IAAI;EACA,OAAO,KAAK,MAAM,OAAO;CAC7B,QAAQ;EACJ,MAAM,YAAY,QAAQ,KAAK,aAAa,eAAe;CAC/D;AACJ;;AAGA,eAAsB,eAAe,MAAc,MAA2C;CAE1F,MAAM,QAAQ,IAAI,eADD,gBAAgB,KAAK,OACL,CAAQ;CACzC,MAAM,WAAW,MAAM,MAAM,KAAK;CAClC,IAAI;CACJ,IAAI;EACA,UAAU,MAAM,SAAS,MAAM,MAAM;CACzC,SAAS,KAAK;EACV,IAAI,UAAU,OAAO,GAAG;EACxB,IAAI,eAAe,OAAO;GACtB,MAAM,EAAE,SAAS,eAAe;GAChC,UAAU;EACd;EACA,MAAM,YAAY,YAAY,KAAK,IAAI,WAAW,iBAAiB,EAAE,OAAO,IAAI,CAAC;CACrF;CACA,MAAM,UAAU,oBAAoB,MAAM,OAAO;CACjD,IAAI,OAAO,YAAY,YAAY,YAAY,MAC3C,MAAM,YAAY,aAAa,eAAe;CAElD,MAAM,QAAQ;CAEd,MAAM,OAAO,eAAe;EADc,GAAG;EAAU,GAAG;CAC9B,CAAM;CAClC,MAAM,MAAM,KAAK,IAAI;CACrB,OAAO,KAAK,EAAE,MAAM,MAAM,KAAK,GAAG,SAAS;CAE3C,QAAQ,OAAO,MAAM,GAAG,cAAc,SAAS,IAAI,CAAC,EAAE,GAAG;AAC7D;;AAGA,eAAe,0BAA0B,MAA+B;CACpE,IAAI;EACA,OAAO,MAAM,SAAS,MAAM,MAAM;CACtC,SAAS,KAAK;EACV,IAAK,IAA8B,SAAS,UACxC,MAAM,YAAY,YAAY,MAAM;EAExC,MAAM,YAAY,aAAa,QAAQ,EAAE,OAAO,IAAI,CAAC;CACzD;AACJ;;;;;AAMA,eAAe,mBAAmB,MAAc,UAAiC;CAC7E,MAAM,MAAM,MAAM,0BAA0B,IAAI;CAMhD,IALkB,WAAsB;EACpC;EACA,QAAQ,EAAE,OAAO,eAAe;EAChC,UAAU,iBAAiB,QAAQ;CACvC,CACI,CAAC,CAAC,UAAU,GAAG;AACvB;;;;;;AAuBA,eAAsB,kBAClB,MAC6B;CAC7B,MAAM,EAAE,YAAY,eAAe;CACnC,IAAI,eAAe,KAAA,KAAa,eAAe,KAAA,GAC3C,MAAM,YAAY,kDAAkD,eAAe;CAEvF,IAAI,eAAe,KAAA,GAAW;EAC1B,kBAAkB,UAAU;EAC5B,OAAO,EAAE,QAAQ,SAAS;CAC9B;CACA,IAAI,eAAe,KAAA,GAAW;EAC1B,MAAM,mBAAmB,YAAY,gBAAgB,KAAK,OAAO,CAAC;EAClE,OAAO;GAAE,QAAQ;GAAQ,MAAM;EAAW;CAC9C;CAEA,MAAM,WAAW,uBAAuB,IAAI;CAC5C,IAAI,SAAS,WAAW,UAAU;EAC9B,kBAAkB,SAAS,IAAI;EAC/B,OAAO,EAAE,QAAQ,SAAS;CAC9B;CACA,MAAM,mBAAmB,SAAS,MAAM,SAAS,QAAQ;CACzD,OAAO;EAAE,QAAQ;EAAQ,MAAM,SAAS;CAAK;AACjD;;;;;;;;;;;;;;AChMA,MAAM,eAAe;;AAErB,MAAM,kBAAkB;;AAGxB,SAAgB,iBAAiB,UAAkB,KAAqB;CACpE,OAAO,KAAK,UAAU,KAAK,YAAY;AAC3C;;AAGA,SAAgB,oBAAoB,UAA0B;CAC1D,OAAO,KAAK,UAAU,eAAe;AACzC;;AAGA,SAAgB,oBAAoB,UAAkB,OAA6B;CAC/E,MAAM,OAAO,iBAAiB,UAAU,MAAM,GAAG;CACjD,UAAU,KAAK,MAAM,IAAI,GAAG,EAAE,WAAW,KAAK,CAAC;CAC/C,cAAc,MAAM,GAAG,KAAK,UAAU,OAAO,MAAM,CAAC,EAAE,KAAK,MAAM;AACrE;;AAGA,SAAgB,mBAAmB,UAAkB,KAAoC;CACrF,OAAO,SAAS,iBAAiB,UAAU,GAAG,CAAC;AACnD;;AAGA,SAAgB,uBAAuB,UAAkB,OAAgC;CACrF,UAAU,UAAU,EAAE,WAAW,KAAK,CAAC;CACvC,cAAc,oBAAoB,QAAQ,GAAG,GAAG,KAAK,UAAU,OAAO,MAAM,CAAC,EAAE,KAAK,MAAM;AAC9F;;AAGA,SAAgB,sBAAsB,UAA4C;CAC9E,OAAO,SAAS,oBAAoB,QAAQ,CAAC;AACjD;;AAGA,SAAS,SAAS,MAAuB;CACrC,IAAI;EACA,OAAO,KAAK,MAAM,aAAa,MAAM,MAAM,CAAC;CAChD,QAAQ;EACJ,OAAO;CACX;AACJ;;AAGA,SAAgB,oBAAoB,UAAoC;CACpE,IAAI,UAAoB,CAAC;CACzB,IAAI;EACA,UAAU,YAAY,UAAU,EAAE,eAAe,KAAK,CAAC,CAAC,CACnD,QAAQ,MAAM,EAAE,YAAY,CAAC,CAAC,CAC9B,KAAK,MAAM,EAAE,IAAI;CAC1B,QAAQ;EACJ,OAAO,CAAC;CACZ;CACA,MAAM,MAAwB,CAAC;CAC/B,KAAK,MAAM,OAAO,SAAS;EACvB,MAAM,QAAQ,mBAAmB,UAAU,GAAG;EAC9C,IAAI,UAAU,MACV,IAAI,KAAK,KAAK;CAEtB;CACA,OAAO;AACX;;AAGA,SAAgB,WAAW,KAAsB;CAC7C,IAAI,CAAC,OAAO,UAAU,GAAG,KAAK,OAAO,GACjC,OAAO;CAEX,IAAI;EACA,QAAQ,KAAK,KAAK,CAAC;EACnB,OAAO;CACX,SAAS,KAAK;EACV,OAAQ,IAA8B,SAAS;CACnD;AACJ;;AAGA,SAAgB,gBAAgB,KAAmB;CAC/C,IAAI,QAAQ,aAAa,SAAS;EAC9B,MAAM,YAAY;GAAC;GAAQ,OAAO,GAAG;GAAG;GAAM;EAAI,GAAG,EAAE,OAAO,SAAS,CAAC;EACxE;CACJ;CACA,IAAI;EACA,QAAQ,KAAK,KAAK,SAAS;CAC/B,QAAQ,CAER;AACJ;;AAGA,SAAgB,cAAc,MAAgB,KAA4B;CACtE,MAAM,QAAQ,MAAM,QAAQ,UAAU,MAAM;EACxC,UAAU;EACV,OAAO;EACP,GAAI,QAAQ,KAAA,IAAY,EAAE,IAAI,IAAI,CAAC;CACvC,CAAC;CACD,MAAM,MAAM;CACZ,OAAO;AACX;;AAeA,SAAgB,gBACZ,UACA,UAAoC,YAClB;CAClB,OAAO,SAAS,KAAK,OAAO;EACxB,KAAK,EAAE;EACP,KAAK,EAAE;EACP,OAAO,EAAE,WAAW,YAAY,QAAQ,EAAE,GAAG,IAAI;EACjD,MAAM,EAAE;EACR,WAAW,EAAE;EACb,cAAc,EAAE,gBAAgB;EAChC,UAAU,EAAE;CAChB,EAAE;AACN;;;;;;;;;;;;;;;AC7IA,MAAM,wBAAwB;;AAE9B,MAAM,mBAAmB;;AAGzB,eAAe,gBAAgB,MAAmC;CAC9D,MAAM,WAAW,KAAK,IAAI,IAAI;CAC9B,IAAI,QAAQ,KAAK,QAAQ,QAAQ,MAAM,KAAK,WAAW,GAAG,CAAC;CAC3D,OAAO,MAAM,SAAS,KAAK,KAAK,IAAI,IAAI,UAAU;EAC9C,MAAM,IAAI,SAAS,YAAY,WAAW,SAAS,gBAAgB,CAAC;EACpE,QAAQ,MAAM,QAAQ,QAAQ,WAAW,GAAG,CAAC;CACjD;CACA,OAAO;AACX;;AAGA,SAAgB,UAAU,UAAkB,MAAwB;CAChE,MAAM,aAAa,sBAAsB,QAAQ;CACjD,IAAI,eAAe,MACf,OAAO,KACH;EACI,KAAK,WAAW;EAChB,OAAO,WAAW,WAAW,GAAG;EAChC,UAAU,WAAW;EACrB,WAAW,WAAW;CAC1B,GACA,YACJ;MAEA,OAAO,KAAK,uBAAuB;CAEvC,MAAM,WAAW,oBAAoB,QAAQ,CAAC,CAAC,QAC1C,MAAM,KAAK,OAAO,KAAA,KAAa,EAAE,QAAQ,KAAK,EACnD;CACA,IAAI,SAAS,WAAW,GAAG;EACvB,OAAO,KAAK,EAAE,SAAS,GAAG,oCAAoC;EAC9D;CACJ;CACA,KAAK,MAAM,OAAO,gBAAgB,QAAQ,GACtC,OAAO,KACH;EACI,KAAK,IAAI;EACT,OAAO,IAAI;EACX,KAAK,IAAI;EACT,MAAM,IAAI;EACV,WAAW,IAAI;EACf,cAAc,IAAI;EAClB,GAAI,IAAI,aAAa,KAAA,IAAY,EAAE,UAAU,IAAI,SAAS,IAAI,CAAC;CACnE,GACA,MACJ;AAER;;AAGA,SAAS,YAAY,SAA+B;CAChD,gBAAgB,QAAQ,GAAG;CAC3B,OAAO,KAAK;EAAE,KAAK,QAAQ;EAAK,KAAK,QAAQ;CAAI,GAAG,WAAW;AACnE;;;;;;;;AASA,eAAe,kBAAkB,UAAkB,QAAuC;CACtF,OAAO,KAAK;EAAE,KAAK,OAAO;EAAK,KAAK,OAAO;CAAI,GAAG,kBAAkB;CACpE,kBAAkB,UAAU,OAAO,GAAG;CACtC,MAAM,aAAa,MAAM,gBAAgB,CAAC,OAAO,GAAG,CAAC;CACrD,KAAK,MAAM,OAAO,YAAY;EAC1B,OAAO,KAAK;GAAE,KAAK,OAAO;GAAK;EAAI,GAAG,aAAa;EACnD,gBAAgB,GAAG;CACvB;CACA,mBAAmB,QAAQ;CAC3B,MAAM,aAAa,sBAAsB,QAAQ;CACjD,IAAI,eAAe,MACf,OAAO,KACH,EAAE,eAAe,WAAW,IAAI,GAChC,iFACJ;AAER;AAEA,eAAsB,QAAQ,UAAkB,MAAiC;CAC7E,MAAM,WAAW,oBAAoB,QAAQ;CAC7C,IAAI,KAAK,OAAO,KAAA,GAAW;EACvB,MAAM,SAAS,SAAS,MAAM,MAAM,EAAE,QAAQ,KAAK,EAAE;EACrD,IAAI,WAAW,KAAA,GAAW;GACtB,OAAO,MAAM,EAAE,KAAK,KAAK,GAAG,GAAG,gBAAgB;GAC/C,QAAQ,WAAW;GACnB;EACJ;EACA,MAAM,kBAAkB,UAAU,MAAM;EACxC;CACJ;CACA,MAAM,aAAa,sBAAsB,QAAQ;CACjD,MAAM,gBAAgB,eAAe,QAAQ,WAAW,WAAW,GAAG,IAAI,WAAW,MAAM;CAC3F,IAAI,eAAe,MAAM;EACrB,OAAO,KAAK,EAAE,KAAK,WAAW,IAAI,GAAG,8BAA8B;EACnE,kBAAkB,UAAU,KAAK;EACjC,MAAM,QAAQ,MAAM,gBAAgB,CAAC,aAAa,CAAC;EACnD,KAAK,MAAM,OAAO,OAAO;GACrB,OAAO,KAAK,EAAE,IAAI,GAAG,wBAAwB;GAC7C,gBAAgB,GAAG;EACvB;CACJ,OACI,OAAO,KAAK,uBAAuB;CAGvC,MAAM,aAAa,MAAM,gBAAgB,SAAS,KAAK,MAAM,EAAE,GAAG,CAAC;CACnE,KAAK,MAAM,WAAW,UAClB,IAAI,WAAW,SAAS,QAAQ,GAAG,GAC/B,YAAY,OAAO;CAG3B,mBAAmB,QAAQ;AAC/B;;AAGA,eAAsB,WAAW,UAAkB,MAAiC;CAChF,MAAM,QAAQ,UAAU,IAAI;CAE5B,MAAM,IAAI,SAAS,YAAY,WAAW,SAAS,IAAI,CAAC;CACxD,MAAM,QAAQ,QAAQ,KAAK,MAAM;CACjC,MAAM,OACF,KAAK,OAAO,KAAA,IACN;EAAC;EAAO;EAAM,KAAK;EAAI;EAAc;CAAQ,IAC7C;EAAC;EAAO;EAAc;CAAQ;CACxC,cAAc,IAAI;CAClB,OAAO,KACH;EAAE,MAAM,KAAK,MAAM,CAAC;EAAG,IAAI,KAAK,MAAM;CAAkB,GACxD,uCACJ;AACJ;;;;ACnHA,eAAe,aAAa,KAA8B;CACtD,MAAM,MAAM,MAAM,YAAY,QAAQ,GAAG;CACzC,OAAO,cAAc,GAAG;AAC5B;;AAGA,MAAM,iBAAiB;;AAGvB,MAAM,2BAA2B;;;;;;;;;;;AAYjC,SAAS,gBAAgB,OAA8B,KAAkC;CAErF,gBAD8B,EAAE,MAAM,CAClC,CAAC,CAAC,GAAG,SAAS,SAAS;EACvB,IAAI,KAAK,WAAW,cAAc,GAAG;GACjC,iBAAiB,KAAK,MAAM,EAAqB,CAAC;GAClD;EACJ;EACA,IAAI,kBAAkB,IAAI,GACtB;EAEJ,IAAI,MAAM,GAAG,KAAK,GAAG;CACzB,CAAC;AACL;;;;;AAMA,SAAS,iBAAiB,KAAmB;CACzC,IAAI;EAEA,MAAM,EAAE,cADK,KAAK,MAAM,GACC;EACzB,IAAI,cAAc,KAAA,KAAa,cAAc,IACzC;EAEJ,OAAY,SAAS,WAAW;GAAE,MAAM;GAAY,OAAO;EAAK,CAAC,CAAC,CAC7D,MAAM,QAAQ;GACX,QAAQ,OAAO,MAAM,GAAG,IAAI,GAAG;EACnC,CAAC,CAAC,CACD,YAAY,CAEb,CAAC;CACT,QAAQ,CAER;AACJ;;AAUA,eAAe,wBAAiD;CAC5D,OAAO;EACH,aAAa,MAAM,aAAa,mBAAmB;EACnD,cAAc,MAAM,aAAa,oBAAoB;EACrD,cAAc,MAAM,aAAa,oBAAoB;CACzD;AACJ;;AAGA,SAAS,eAAe,MAA2B;CAC/C,OAAO,KAAK,WAAW,QAAQ,IAAI,sBAAsB,eAAe;AAC5E;;AAGA,SAAS,aAAa,KAAsB;CACxC,OAAO,eAAe,QAAQ,IAAI,UAAU,OAAO,GAAG;AAC1D;;;AAIA,eAAe,cACX,UACA,MACkC;CAClC,IAAI;EACA,OAAO,MAAM,eAAe;GACxB;GACA,GAAI,KAAK,WAAW,KAAA,IAAY,EAAE,QAAQ,KAAK,OAAO,IAAI,CAAC;EAC/D,CAAC;CACL,SAAS,KAAK;EACV,OAAO,MACH,EAAE,IAAI,GACN,mBAAmB,aAAa,GAAG,EAAE,+GAIzC;EACA,QAAQ,WAAW;EACnB;CACJ;AACJ;;;;;;;;;;AAWA,SAAS,uBAAuB,QAAyB;CACrD,MAAM,EAAE,UAAU,KAAK,cAAc,kBAAkB,MAAM;CAC7D,IAAI,CAAC,UACD,OAAO;CAEX,OAAO,MACH;EAAE,KAAK;EAAW,SAAS;CAAO,GAClC,+EAEJ;CACA,QAAQ,WAAW;CACnB,OAAO;AACX;;;;AAKA,SAAS,YAAY,IAAmB,QAAsB;CAC1D,OAAO,MAAM;EAAE,WAAW,GAAG;EAAS,QAAQ,GAAG;EAAQ,QAAQ,GAAG;CAAO,GAAG,SAAS;CACvF,OAAO,MAAM,EAAE,SAAS,OAAO,GAAG,MAAM;CACxC,OAAO,MAAM,iCAAiC;AAClD;;;;;;;;;AAoBA,SAAS,mBAAmB,KAA2C;CACnE,MAAM,EAAE,MAAM,IAAI,QAAQ,UAAU,SAAS,YAAY;CACzD,OAAO;EACH;EACA,aAAa,QAAQ;EACrB,cAAc,QAAQ;EACtB,cAAc,QAAQ;EACtB;EACA,KAAK;EACL,GAAI,qBAAqB,IAAI,CAAC,IAAI,EAAE,YAAY,kBAAkB,EAAE,SAAS,CAAC,EAAE;EAChF,UAAU;EACV,OAAO;GAAC;GAAW;GAAQ;EAAM;EACjC,UAAU;GACN,GAAG,oBAAoB,oBAAoB,KAAK,OAAO,CAAC;GACxD,kBAAkB;EACtB;EACA,GAAI,KAAK,OAAO,KAAA,IAAY,EAAE,UAAU,KAAK,GAAG,IAAI,CAAC;EACrD;CACJ;AACJ;;;AAIA,eAAe,cACX,MACA,IACA,QACA,UACqB;CACrB,MAAM,UAAU,MAAM,sBAAsB;CAC5C,MAAM,UAAU,eAAe,IAAI;CACnC,YAAY,IAAI,MAAM;CACtB,OAAO,MAAM,eACT,mBAAmB;EAAE;EAAM;EAAI;EAAQ;EAAU;EAAS;CAAQ,CAAC,CACvE;AACJ;;AAGA,SAAS,mBAAmB,OAA2B;CACnD,IAAI,MAAM,WAAW,MACjB,gBAAgB,MAAM,QAAQ,QAAQ,MAAM;CAEhD,IAAI,MAAM,WAAW,MACjB,gBAAgB,MAAM,QAAQ,QAAQ,MAAM;AAEpD;;;AAIA,SAAS,mBACL,UACA,SACA,OACA,QACA,UACI;CACJ,oBAAoB,UAAU;EAC1B,KAAK;EACL,KAAK,QAAQ;EACb,GAAI,MAAM,QAAQ,KAAA,IAAY,EAAE,aAAa,MAAM,IAAI,IAAI,CAAC;EAC5D,4BAAW,IAAI,KAAK,EAAA,CAAE,YAAY;EAClC,MAAM;EACN;EACA,GAAI,aAAa,KAAA,IAAY,EAAE,SAAS,IAAI,CAAC;CACjD,CAAC;AACL;;;;;AAMA,SAAS,oBACL,OACA,UACA,SACa;CACb,IAAI,YAAY;CAChB,MAAM,mBAAyB;EAC3B,IAAI,MAAM,aAAa,QAAQ,MAAM,QACjC;EAEJ,OAAO,KAAK,EAAE,QAAQ,GAAG,kBAAkB;EAC3C,MAAM,KAAK;CACf;CACA,MAAM,mBAAmB,WAAyB;EAC9C,IAAI,WACA;EAEJ,YAAY;EACZ,OAAO,KAAK;GAAE;GAAS;EAAO,GAAG,iBAAiB;EAElD,WAD4B,YAAY,wBACjC,CAAC,CAAC,QAAQ;CACrB;CACA,kBAAkB;EAAE;EAAU;EAAS,iBAAiB,gBAAgB,MAAM;CAAE,CAAC;CACjF,MAAM,YAAY,WAAyB;EAGvC,kBAAkB,UAAU,OAAO;EACnC,gBAAgB,MAAM,QAAQ;CAClC;CACA,QAAQ,GAAG,gBAAgB,SAAS,QAAQ,CAAC;CAC7C,QAAQ,GAAG,iBAAiB,SAAS,SAAS,CAAC;CAC/C,QAAQ,GAAG,kBAAkB,SAAS,UAAU,CAAC;CACjD,aAAa;AACjB;;AAGA,eAAe,iBACX,OACA,UACA,SACA,YACa;CACb,MAAM,IAAI,SAAe,YAAY;EACjC,MAAM,GAAG,SAAS,SAAS;GACvB,OAAO,KAAK;IAAE;IAAM,UAAU,WAAW;GAAE,GAAG,UAAU;GACxD,mBAAmB,UAAU,SAAS,OAAO,UAAU,IAAI;GAC3D,QAAQ;EACZ,CAAC;EACD,MAAM,GAAG,UAAU,QAAQ;GACvB,OAAO,MAAM,EAAE,IAAI,GAAG,YAAY;GAClC,QAAQ;EACZ,CAAC;CACL,CAAC;AACL;;AAGA,eAAsB,iBAAiB,OAAoB,CAAC,GAAkB;CAC1E,MAAM,WAAW,gBAAgB,KAAK,OAAO;CAC7C,MAAM,KAAK,MAAM,cAAc,UAAU,IAAI;CAC7C,IAAI,OAAO,KAAA,GACP;CAEJ,MAAM,UAAU,KAAK,MAAM;CAC3B,MAAM,SAAS,KAAK,KAAK,UAAU,OAAO;CAC1C,IAAI,CAAC,uBAAuB,MAAM,GAC9B;CAEJ,MAAM,EAAE,UAAU,MAAM,cAAc,MAAM,IAAI,QAAQ,QAAQ;CAChE,mBAAmB,KAAK;CACxB,mBAAmB,UAAU,SAAS,OAAO,SAAS;CAEtD,MAAM,iBAAiB,OAAO,UAAU,SADrB,oBAAoB,OAAO,UAAU,OACE,CAAC;AAC/D;;;;;;;;;;;;;;ACnUA,MAAM,eAAe;;AAErB,MAAM,gBAAgB;;AAatB,SAAS,gBAAgB,MAAyB,QAAuC;CACrF,IAAI,KAAK,QAAQ,KAAA,KAAa,KAAK,IAAI,SAAS,GAC5C,OAAO,KAAK,IAAI,KAAK,QAAQ,EAAE,GAAG,EAAE;CAExC,OAAO,OAAO,SAAS,QAAQ,SAAS,KAAK,YAAY,KAAK;AAClE;;AAGA,SAAS,oBAAoB,MAAyB,QAA2B;CAC7E,IAAI,KAAK,QAAQ,KAAA,GACb,OAAO,OAAO;CAElB,OAAO;AACX;;;;;;AAwBA,SAAS,gBACL,QACA,KACA,eACI;CACJ,IAAI,WAAW,MACX;CAGJ,gBAD2B,EAAE,OAAO,OAAO,CAC1C,CAAC,CAAC,GAAG,SAAS,SAAS;EACpB,QAAQ,OAAO,MAAM,gBAAgB,IAAI,IAAI,IAAI,KAAK,MAAM,GAAG,KAAK,GAAG;CAC3E,CAAC;AACL;;AAGA,SAAS,aAAa,KAAoB,MAA8B;CACpE,IAAI,IAAI,WAAW,GACf;CAEJ,MAAM,eAAe,IAAI,cAAc,IAAI,KAAK,EAAE,KAAK;CAEvD,OAAO,MAAM;EAAE,IAAI,KAAK;EAAI,KAAK,QAAQ;EAAK;CAAa,GAAG,MAAM;CACpE,MAAM,OAAO;EAAC,IAAI;EAAO;EAAM,KAAK;EAAI;EAAc,IAAI;CAAQ;CAClE,IAAI,IAAI,YAAY,KAAA,GAChB,KAAK,KAAK,cAAc,IAAI,OAAO;CAMvC,MAAM,QAAQ,MAAM,QAAQ,UAAU,MAAM;EACxC,OAAO;GAAC;GAAW;GAAQ;EAAM;EACjC,KAAK;GACD,GAAG,QAAQ;GACX,qBAAqB;GACrB,GAAG,IAAI;EACX;CACJ,CAAC;CACD,gBAAgB,MAAM,QAAQ,KAAK,IAAI,IAAI,aAAa;CACxD,gBAAgB,MAAM,QAAQ,KAAK,IAAI,IAAI,aAAa;CACxD,IAAI,SAAS,IAAI,KAAK,IAAI,KAAK;CAC/B,oBAAoB,IAAI,UAAU;EAC9B,KAAK,KAAK;EACV,KAAK,MAAM,OAAO;EAClB,4BAAW,IAAI,KAAK,EAAA,CAAE,YAAY;EAClC,MAAM;EACN,QAAQ;EACR;CACJ,CAAC;CACD,MAAM,GAAG,SAAS,MAAM,WAAW;EAC/B,IAAI,SAAS,OAAO,KAAK,EAAE;EAC3B,OAAO,KAAK;GAAE,IAAI,KAAK;GAAI;GAAM,QAAQ,UAAU;EAAO,GAAG,MAAM;EACnE,IAAI,SAAS,qBAAqB;GAG9B,OAAO,MAAM;IAAE,IAAI,KAAK;IAAI;GAAK,GAAG,uBAAuB;GAC3D,oBAAoB,IAAI,UAAU;IAC9B,KAAK,KAAK;IACV,KAAK,MAAM,OAAO;IAClB,4BAAW,IAAI,KAAK,EAAA,CAAE,YAAY;IAClC,MAAM;IACN,QAAQ;IACR,UAAU;IACV;GACJ,CAAC;GACD;EACJ;EACA,IAAI,CAAC,IAAI,WAAW,KAAK,IAAI,aAAa;GAEtC,IAAI,cAAc,IAAI,KAAK,IAAI,eAAe,CAAC;GAC/C,iBAAiB;IACb,aAAa,KAAK,IAAI;GAC1B,GAAG,IAAI,cAAc;EACzB,OACI,oBAAoB,IAAI,UAAU;GAC9B,KAAK,KAAK;GACV,KAAK,MAAM,OAAO;GAClB,4BAAW,IAAI,KAAK,EAAA,CAAE,YAAY;GAClC,MAAM;GACN,QAAQ;GACR,UAAU;GACV;EACJ,CAAC;CAET,CAAC;CACD,MAAM,GAAG,UAAU,QAAQ;EACvB,MAAM,EAAE,YAAY;EACpB,OAAO,MAAM;GAAE,IAAI,KAAK;GAAI;EAAI,GAAG,WAAW,SAAS;EACvD,IAAI,SAAS,OAAO,KAAK,EAAE;CAC/B,CAAC;AACL;;;;;;;;AASA,SAAS,QAAQ,KAA0B;CACvC,OAAO,KAAK,eAAe;CAC3B,kBAAkB,IAAI,UAAU,KAAK;CAErC,MAAM,aAAa,iBAAiB;EAChC,KAAK,MAAM,SAAS,IAAI,SAAS,OAAO,GACpC,MAAM,KAAK;EAEf,QAAQ,KAAK,CAAC;CAClB,GAAG,aAAa;CAChB,WAAW,QAAQ;CACnB,MAAM,OAAO,kBAAkB;EAC3B,IAAI,IAAI,SAAS,SAAS,GAAG;GACzB,cAAc,IAAI;GAClB,aAAa,UAAU;GACvB,QAAQ,KAAK,CAAC;EAClB;CACJ,GAAG,YAAY;AACnB;;AAGA,eAAsB,cAAc,OAA0B,CAAC,GAAkB;CAC7E,MAAM,WAAW,gBAAgB,KAAK,OAAO;CAE7C,MAAM,EAAE,WAAW,MAAM,wBACrB,KAAK,YAAY,KAAA,IAAY,EAAE,SAAS,KAAK,QAAQ,IAAI,CAAC,CAC9D;CACA,MAAM,WAAW,gBAAgB,MAAM,MAAM;CAC7C,IAAI,SAAS,WAAW,GAAG;EACvB,OAAO,KAAK,0CAA0C;EACtD;CACJ;CACA,MAAM,iBAAiB,oBAAoB,MAAM,MAAM;CACvD,MAAM,GAAG,QAAQ,MAAM,QAAQ;CAC/B,MAAM,2BAAW,IAAI,IAA0B;CAC/C,MAAM,gCAAgB,IAAI,IAAoB;CAC9C,IAAI,WAAW;CAEf,MAAM,SAAS,oBAAoB,KAAK,OAAO;CAC/C,MAAM,MAAqB;EACvB;EACA;EACA;EACA,aAAa,OAAO;EACpB,GAAI,KAAK,YAAY,KAAA,IAAY,EAAE,SAAS,KAAK,QAAQ,IAAI,CAAC;EAC9D;EACA;EACA,UAAU,oBAAoB,MAAM;EACpC,eAAe,uBAAuB,MAAM,MAAM;EAClD,kBAAkB;CACtB;CAGA,uBAAuB,UAAU;EAC7B,KAAK,QAAQ;EACb,4BAAW,IAAI,KAAK,EAAA,CAAE,YAAY;EAClC,UAAU,SAAS,KAAK,MAAM,EAAE,EAAE;CACtC,CAAC;CAED,KAAK,MAAM,QAAQ,UACf,aAAa,KAAK,IAAI;CAM1B,MAAM,iBAAuB;EACzB,IAAI,UACA;EAEJ,WAAW;EACX,QAAQ,GAAG;CACf;CACA,QAAQ,GAAG,UAAU,QAAQ;CAC7B,QAAQ,GAAG,WAAW,QAAQ;CAC9B,QAAQ,GAAG,YAAY,QAAQ;CAE/B,kBAAkB;EAAE;EAAU,WAAW;CAAS,CAAC;CAGnD,MAAM,IAAI,cAAoB,CAE9B,CAAC;AACL;;;;;;;;;;AC7PA,SAAS,YAAY,SAAmD;CACpE,IAAI,YAAY,KAAA,GACZ,OAAO,CAAC;CAEZ,OAAO,EAAE,QAAQ;AACrB;;AAGA,SAAS,YAAY,SAAmD;CACpE,IAAI,YAAY,KAAA,GACZ,OAAO,CAAC;CAEZ,OAAO,EAAE,QAAQ;AACrB;;AAGA,SAAS,WAAW,QAAiD;CACjE,IAAI,WAAW,KAAA,GACX,OAAO,CAAC;CAEZ,OAAO,EAAE,OAAO;AACpB;;AAWA,eAAe,uBAAuB,MAAoB,KAA8B;CACpF,MAAM,CAAC,QAAQ;CACf,IAAI,SAAS,KAAA,GACT;CAEJ,MAAM,iBAAiB;EACnB,IAAI;EACJ,GAAG,YAAY,KAAK,OAAO;EAC3B,GAAG,WAAW,KAAK,MAAM;EACzB,GAAG,YAAY,KAAK,OAAO;CAC/B,CAAC;AACL;;;;AAKA,eAAe,UAAU,MAAmC;CACxD,MAAM,EAAE,WAAW,MAAM,wBAAwB,YAAY,KAAK,OAAO,CAAC;CAC1E,IAAI,OAAO,SAAS,WAAW,GAE3B,MAAM,IAAI,MAAM,8CAA8C;CAElE,MAAM,cAAc;EAAE,GAAG,YAAY,KAAK,OAAO;EAAG,GAAG,YAAY,KAAK,OAAO;CAAE,CAAC;AACtF;;AAGA,eAAsB,mBAAmB,MAAmC;CACxE,MAAM,MAAM,KAAK,MAAM,CAAC;CACxB,IAAI,IAAI,WAAW,GAAG;EAClB,MAAM,UAAU,IAAI;EACpB;CACJ;CACA,IAAI,IAAI,WAAW,GAAG;EAClB,MAAM,uBAAuB,MAAM,GAAG;EACtC;CACJ;CACA,MAAM,cAAc;EAAE;EAAK,GAAG,YAAY,KAAK,OAAO;EAAG,GAAG,YAAY,KAAK,OAAO;CAAE,CAAC;AAC3F;;AAGA,eAAsB,qBAAqB,MAA2C;CAClF,MAAM,cAAc,YAAY,KAAK,OAAO,CAAC;AACjD;;;;;;;;;;;;;ACvEA,SAAS,YAAY,KAAoB;CACrC,IAAI,UAAU,OAAO,GAAG;CACxB,IAAI,eAAe,OAAO;EACtB,MAAM,EAAE,SAAS,eAAe;EAChC,UAAU;CACd;CACA,OAAO,MAAM,EAAE,IAAI,GAAG,OAAO;AACjC;;AAGA,SAAgB,kBAAkB,KAAoB;CAClD,YAAY,GAAG;CACf,QAAQ,WAAW,eAAe,cAAc,sBAAsB;AAC1E;;;;;;;;;;ACNA,SAAS,UAAU,OAAe,MAA0B;CACxD,KAAK,KAAK,KAAK;CACf,OAAO;AACX;;AAGA,MAAM,SAAS;CACX;CACA;CACA;CACA;CACA;CACA;AACJ,CAAC,CAAC,KAAK,IAAI;;AAGX,SAAS,YAAY,SAAwC;CACzD,MAAM,EAAE,YAAY,QAAQ,KAA2B;CACvD,OAAO,YAAY,KAAA,IAAY,CAAC,IAAI,EAAE,QAAQ;AAClD;;AAGA,SAAS,uBAAuB,SAAwB;CACpD,MAAM,YAAY,QAAQ,QAAQ,QAAQ,CAAC,CAAC,YAAY,wBAAwB;CAChF,UACK,QAAQ,MAAM,CAAC,CACf,YAAY,UAAU,CAAC,CACvB,OAAO,YAAY;EAChB,IAAI;GACA,MAAM,cAAc,YAAY,OAAO,CAAC;EAC5C,SAAS,KAAK;GACV,kBAAkB,GAAG;EACzB;CACJ,CAAC;CACL,UACK,QAAQ,MAAM,CAAC,CACf,YAAY,aAAa,CAAC,CAC1B,OAAO,YAAY;EAChB,IAAI;GACA,MAAM,cAAc,YAAY,OAAO,CAAC;EAC5C,SAAS,KAAK;GACV,kBAAkB,GAAG;EACzB;CACJ,CAAC;CACL,UACK,QAAQ,cAAc,CAAC,CACvB,YAAY,6BAA6B,CAAC,CAC1C,OAAO,OAAO,SAAiB;EAC5B,IAAI;GACA,MAAM,eAAe,MAAM,YAAY,OAAO,CAAC;EACnD,SAAS,KAAK;GACV,kBAAkB,GAAG;EACzB;CACJ,CAAC;CAGL,UACK,QAAQ,UAAU,CAAC,CACnB,YACG,8DACJ,CAAC,CACA,OAAO,mBAAmB,+BAA+B,CAAC,CAC1D,OAAO,wBAAwB,iBAAiB,CAAC,CACjD,OAAO,OAAO,SAAmD;EAC9D,IAAI;GACA,MAAM,SAAS,MAAM,kBAAkB;IACnC,YAAY,KAAK;IACjB,YAAY,KAAK;IACjB,GAAG,YAAY,OAAO;GAC1B,CAAC;GAED,QAAQ,OAAO,MACX,OAAO,WAAW,WACZ,yBACA,mBAAmB,OAAO,KAAK,IACzC;EACJ,SAAS,KAAK;GACV,kBAAkB,GAAG;EACzB;CACJ,CAAC;AACT;;AAGA,SAAS,0BAA0B,SAAwB;CACvD,QACK,QAAQ,YAAY,CAAC,CACrB,YAAY,6BAA6B,CAAC,CAC1C,OAAO,YAAY;EAChB,IAAI;GACA,MAAM,qBAAqB,YAAY,OAAO,CAAC;EACnD,SAAS,KAAK;GACV,kBAAkB,GAAG;EACzB;CACJ,CAAC;AACT;;AAGA,SAAS,UACL,SACA,KACwC;CACxC,OAAO,OAAO,SAAS;EACnB,IAAI;GAEA,MAAM,IADW,gBAAgB,YAAY,OAAO,CAAC,CAAC,OACrC,GAAG,KAAK,OAAO,KAAA,IAAY,EAAE,IAAI,KAAK,GAAG,IAAI,CAAC,CAAC;EACpE,SAAS,KAAK;GACV,kBAAkB,GAAG;EACzB;CACJ;AACJ;;AAGA,SAAS,oBAAoB,SAAwB;CACjD,QACK,QAAQ,QAAQ,CAAC,CACjB,YAAY,oCAAoC,CAAC,CACjD,OAAO,kBAAkB,QAAQ,CAAC,CAClC,OAAO,UAAU,UAAU,UAAU,QAAQ,UAAU,UAAU,GAAG,CAAC,CAAC;CAC3E,QACK,QAAQ,MAAM,CAAC,CACf,YACG,2DACJ,CAAC,CACA,OAAO,kBAAkB,6BAA6B,CAAC,CACvD,OAAO,UAAU,UAAU,UAAU,QAAQ,QAAQ,UAAU,GAAG,CAAC,CAAC;CACzE,QACK,QAAQ,SAAS,CAAC,CAClB,YAAY,kDAAkD,CAAC,CAC/D,OAAO,kBAAkB,0BAA0B,CAAC,CACpD,OAAO,UAAU,UAAU,UAAU,QAAQ,WAAW,UAAU,GAAG,CAAC,CAAC;AAChF;;AAGA,SAAS,mBAAmB,SAAwB;CAChD,QAAQ,OACJ,OAAO,SAAiF;EACpF,IAAI;GACA,MAAM,mBAAmB,IAAI;EACjC,SAAS,KAAK;GACV,kBAAkB,GAAG;EACzB;CACJ,CACJ;AACJ;;AAGA,SAAgB,OAAa;CACzB,MAAM,UAAU,IAAI,QAAQ;CAC5B,QACK,KAAK,WAAW,CAAC,CACjB,QAAQ,OAAO,CAAC,CAChB,YAAY,iCAAiC;CAElD,QACK,OACG,kBACA,qCACA,WACA,CAAC,CACL,CAAC,CACA,OAAO,wBAAwB,4BAA4B,CAAC,CAC5D,OAAO,oBAAoB,eAAe,CAAC,CAC3C,OACG,oBACA,6EACJ;CAKJ,QAAQ,KAAK,mBAAmB;EAE5B,IADY,oBAAoB,YAAY,OAAO,CAAC,CAAC,OAC/C,CAAC,CAAC,QACJ,QAAQ,OAAO,MAAM,GAAG,OAAO,GAAG;CAE1C,CAAC;CAED,uBAAuB,OAAO;CAC9B,0BAA0B,OAAO;CACjC,oBAAoB,OAAO;CAC3B,mBAAmB,OAAO;CAE1B,QAAQ,MAAM,QAAQ,IAAI;AAC9B;;;;;;;;;;;;;;;;;;;;ACvLA,KAAK"}

package/package.json

@@ -1,6 +1,6 @@
 {
     "name": "@napuketto/cli",
-    "version": "0.4.2",
+    "version": "0.4.3",
     "description": "Command line interface for NapukettoQQ",
     "type": "module",
     "files": [