@munchi_oy/react-native-epson-printer 1.0.7 → 1.0.9

package/README.md

@@ -30,6 +30,25 @@ This package provides:
 
 This package does not include Star or Sunmi drivers.
 
+## Runtime Contract
+
+For both iOS and Android, the SDK aims to provide this behavior:
+
+- Native printer work may take time, especially for Bluetooth connection, status checks, and image printing.
+- Slow printer operations are acceptable; visible app hangs are not.
+- Printer work must not block the app UI/main thread while running.
+- Errors from native printer operations must reject back to JS and must not be swallowed.
+- Image and logo printing may be more expensive than text-only receipts, but must still remain asynchronous from the app's point of view.
+
+## Observed Performance Expectations
+
+These are real-device expectations, not strict guarantees:
+
+- iOS: around 3s end-to-end can be acceptable if the app UI remains responsive.
+- Android: the first print may take around 5-6s, with later warm prints often dropping to around 2-3s.
+- Actual timing depends on connection state, Bluetooth behavior, printer readiness, and whether the receipt includes images.
+- Responsiveness and correct JS error propagation matter more than raw duration.
+
 ## Behavior Support (implemented)
 
 | Behavior | Status | Details |
@@ -41,6 +60,7 @@ This package does not include Star or Sunmi drivers.
 | Retry for transient busy/timeout states | Implemented | Native operations retry for retryable states (`BUSY`, `IN_USE`, timeout-family errors). |
 | Print receive timeout guard | Implemented | Native print call fails with `PRINT_TIMEOUT` if printer callback does not return within 30s. |
 | iOS stale-session recovery | Implemented | One-shot session recovery + reconnect + retry for stale/busy/offline connection scenarios. |
+| Non-blocking native printer execution | Implemented | Native connect / print / status work is executed off the app UI thread on both iOS and Android. |
 | Post-print auto-disconnect | Implemented | JS driver schedules disconnect after 5s idle after print completion. |
 | Android warm reconnect cache | Implemented | Native Android keeps a short-lived connection cache (up to 120s) for faster reconnect. |
 | Discovery cleanup/filtering | Implemented | Duplicate targets are deduped and Epson sub-devices such as `[local_display]` are filtered out. |
@@ -194,6 +214,13 @@ await printer.printEmbedded({
 });
 ```
 
+### Image printing expectations
+
+- Image printing is supported.
+- Image printing can take longer than text-only receipts because the image may need decode, resize, rasterization, and transport work.
+- This extra work should not block the app UI.
+- If image printing fails, the error should still reject back to JS like any other print failure.
+
 ### Cash drawer
 
 ```ts

package/dist/index.js

@@ -1,4 +1,4 @@
-"use strict";var he=Object.create;var D=Object.defineProperty;var Ee=Object.getOwnPropertyDescriptor;var Ce=Object.getOwnPropertyNames;var fe=Object.getPrototypeOf,Re=Object.prototype.hasOwnProperty;var pe=(t,e)=>{for(var r in e)D(t,r,{get:e[r],enumerable:!0})},J=(t,e,r,n)=>{if(e&&typeof e=="object"||typeof e=="function")for(let i of Ce(e))!Re.call(t,i)&&i!==r&&D(t,i,{get:()=>e[i],enumerable:!(n=Ee(e,i))||n.enumerable});return t};var Ne=(t,e,r)=>(r=t!=null?he(fe(t)):{},J(e||!t||!t.__esModule?D(r,"default",{value:t,enumerable:!0}):r,t)),Pe=t=>J(D({},"__esModule",{value:!0}),t);var Be={};pe(Be,{Epos2CallbackCode:()=>te,Epos2ConnectionEvent:()=>Z,Epos2ErrorStatus:()=>ee,Epos2Font:()=>re,Epos2Lang:()=>V,Epos2StatusEvent:()=>H,EpsonModel:()=>q,FontSize:()=>b,MunchiPrinterError:()=>h,PrinterError:()=>p,PrinterErrorCode:()=>y,PrinterProvider:()=>Ue,PrinterTranslationCode:()=>v,VERSION:()=>Te,discoverPrinters:()=>ce,getGlobalLogger:()=>Y,getPrinter:()=>K,resolveEpsonError:()=>Le,resolveModelFromBluetoothName:()=>le,resolvePrinterError:()=>de,setGlobalLogger:()=>B,usePrinter:()=>k,usePrinterStatus:()=>Fe});module.exports=Pe(Be);var j={},B=t=>{j.logger=t},Y=()=>j.logger;var W=require("react-native");var y=(T=>(T.CONNECTION_FAILED="CONNECTION_FAILED",T.PRINT_FAILED="PRINT_FAILED",T.DISCOVERY_FAILED="DISCOVERY_FAILED",T.TIMEOUT="TIMEOUT",T.NATIVE_MODULE_MISSING="NATIVE_MODULE_MISSING",T.UNKNOWN="UNKNOWN",T))(y||{}),v=(c=>(c.ERR_PRINTER_RECONNECT_REQUIRED="printer.error.reconnect_required",c.ERR_PRINTER_OFFLINE="printer.error.offline",c.ERR_PRINTER_BUSY="printer.error.busy",c.ERR_PRINTER_COVER_OPEN="printer.error.cover_open",c.ERR_PRINTER_PAPER_EMPTY="printer.error.paper_empty",c.ERR_CONNECTION_TIMEOUT="printer.error.connection_timeout",c.ERR_UNKNOWN="printer.error.unknown",c))(v||{}),h=class t extends Error{constructor(r,n,i,o){super(i);this.code=r;this.translationCode=n;this.originalError=o;this.name="MunchiPrinterError",Object.setPrototypeOf(this,t.prototype)}};var Ie=t=>{if(!t||typeof t!="object")return"";let e=t.code;return typeof e=="string"?e:""},Se=t=>{if(t instanceof Error)return t.message;if(t&&typeof t=="object"){let e=t.message;if(typeof e=="string")return e}return String(t)},g=(t,e,r)=>t.includes(r)||e===r||e.includes(r),f=t=>{if(t instanceof h)return t;let e=Se(t),r=Ie(t),n=e.toUpperCase(),i=r.toUpperCase();return n.includes("ERROR CODE: 4")?new h("PRINT_FAILED","printer.error.cover_open","Printer cover is open",t):n.includes("ERROR CODE: 3")?new h("PRINT_FAILED","printer.error.busy","Printer is performing auto-recovery",t):n.includes("ERROR CODE: 7")?new h("PRINT_FAILED","printer.error.paper_empty","Printer paper is empty",t):g(n,i,"TARGET_IN_USE")||g(n,i,"BUSY")||g(n,i,"IN_USE")||g(n,i,"PRINT_BUSY")||g(n,i,"DISCOVERY_BUSY")?new h("TIMEOUT","printer.error.busy","Printer is busy",t):g(n,i,"TIMEOUT")||g(n,i,"ERR_TIMEOUT")||g(n,i,"PRINT_TIMEOUT")?new h("TIMEOUT","printer.error.connection_timeout","Operation timed out",t):g(n,i,"PRINTER_RECONNECT_REQUIRED")||n.includes("RECONNECT THE PRINTER")?new h("CONNECTION_FAILED","printer.error.reconnect_required",e,t):g(n,i,"PERMISSION_DENIED")||g(n,i,"LOCATION_DISABLED")||g(n,i,"BLUETOOTH_DISABLED")?new h("CONNECTION_FAILED","printer.error.offline",e,t):g(n,i,"DISCOVERY_ERROR")||n.includes("DISCOVERY")?new h("DISCOVERY_FAILED","printer.error.unknown",e,t):g(n,i,"PRINTER_OFFLINE")||g(n,i,"SESSION_ERROR")||g(n,i,"STATUS_ERROR")||g(n,i,"INIT_ERROR")||g(n,i,"PRINT_CANCELED")||g(n,i,"DISCONNECT")||g(n,i,"ERR_DISCONNECT")||n.includes("PRINTER NOT CONNECTED")||n.includes("OFFLINE")?new h("CONNECTION_FAILED","printer.error.offline",n.includes("OFFLINE")?e:"Printer disconnected",t):g(n,i,"CONNECT_ERROR")||n.includes("FAILED TO CONNECT")||g(n,i,"ERR_CONNECT")?new h("CONNECTION_FAILED","printer.error.offline","Failed to connect to printer",t):g(n,i,"PRINT_ERROR")||g(n,i,"PRINT_FAILURE")?new h("PRINT_FAILED","printer.error.unknown",e,t):new h("UNKNOWN","printer.error.unknown",e,t)};var H=(a=>(a[a.ONLINE=0]="ONLINE",a[a.OFFLINE=1]="OFFLINE",a[a.POWER_OFF=2]="POWER_OFF",a[a.COVER_CLOSE=3]="COVER_CLOSE",a[a.COVER_OPEN=4]="COVER_OPEN",a[a.PAPER_OK=5]="PAPER_OK",a[a.PAPER_NEAR_END=6]="PAPER_NEAR_END",a[a.PAPER_EMPTY=7]="PAPER_EMPTY",a[a.DRAWER_HIGH=8]="DRAWER_HIGH",a[a.DRAWER_LOW=9]="DRAWER_LOW",a[a.BATTERY_ENOUGH=10]="BATTERY_ENOUGH",a[a.BATTERY_EMPTY=11]="BATTERY_EMPTY",a[a.AUTO_RECOVER_ERROR=20]="AUTO_RECOVER_ERROR",a[a.AUTO_RECOVER_OK=21]="AUTO_RECOVER_OK",a[a.UNRECOVERABLE_ERROR=22]="UNRECOVERABLE_ERROR",a))(H||{}),Z=(n=>(n[n.RECONNECTING=0]="RECONNECTING",n[n.RECONNECT=1]="RECONNECT",n[n.DISCONNECT=2]="DISCONNECT",n))(Z||{}),ee=(u=>(u[u.SUCCESS=0]="SUCCESS",u[u.ERR_PARAM=1]="ERR_PARAM",u[u.ERR_CONNECT=2]="ERR_CONNECT",u[u.ERR_TIMEOUT=3]="ERR_TIMEOUT",u[u.ERR_MEMORY=4]="ERR_MEMORY",u[u.ERR_ILLEGAL=5]="ERR_ILLEGAL",u[u.ERR_PROCESSING=6]="ERR_PROCESSING",u[u.ERR_NOT_FOUND=7]="ERR_NOT_FOUND",u[u.ERR_IN_USE=8]="ERR_IN_USE",u[u.ERR_TYPE_INVALID=9]="ERR_TYPE_INVALID",u[u.ERR_DISCONNECT=10]="ERR_DISCONNECT",u[u.ERR_ALREADY_OPENED=11]="ERR_ALREADY_OPENED",u[u.ERR_ALREADY_USED=12]="ERR_ALREADY_USED",u[u.ERR_BOX_COUNT_OVER=13]="ERR_BOX_COUNT_OVER",u[u.ERR_BOX_CLIENT_OVER=14]="ERR_BOX_CLIENT_OVER",u[u.ERR_UNSUPPORTED=15]="ERR_UNSUPPORTED",u[u.ERR_DEVICE_BUSY=16]="ERR_DEVICE_BUSY",u[u.ERR_RECOVERY_FAILURE=17]="ERR_RECOVERY_FAILURE",u[u.ERR_FAILURE=255]="ERR_FAILURE",u))(ee||{}),te=(d=>(d[d.SUCCESS=0]="SUCCESS",d[d.ERR_TIMEOUT=1]="ERR_TIMEOUT",d[d.ERR_NOT_FOUND=2]="ERR_NOT_FOUND",d[d.ERR_AUTORECOVER=3]="ERR_AUTORECOVER",d[d.ERR_COVER_OPEN=4]="ERR_COVER_OPEN",d[d.ERR_CUTTER=5]="ERR_CUTTER",d[d.ERR_MECHANICAL=6]="ERR_MECHANICAL",d[d.ERR_EMPTY=7]="ERR_EMPTY",d[d.ERR_UNRECOVERABLE=8]="ERR_UNRECOVERABLE",d[d.ERR_SYSTEM=9]="ERR_SYSTEM",d[d.ERR_PORT=10]="ERR_PORT",d[d.ERR_FAILURE=255]="ERR_FAILURE",d))(te||{}),V=(l=>(l[l.EN=0]="EN",l[l.JA=1]="JA",l[l.ZH_CN=2]="ZH_CN",l[l.ZH_TW=3]="ZH_TW",l[l.KO=4]="KO",l[l.TH=5]="TH",l[l.VI=6]="VI",l[l.MULTI=7]="MULTI",l))(V||{}),re=(o=>(o[o.FONT_A=0]="FONT_A",o[o.FONT_B=1]="FONT_B",o[o.FONT_C=2]="FONT_C",o[o.FONT_D=3]="FONT_D",o[o.FONT_E=4]="FONT_E",o))(re||{}),q=(s=>(s[s.TM_M10=0]="TM_M10",s[s.TM_M30=1]="TM_M30",s[s.TM_P20=2]="TM_P20",s[s.TM_P60=3]="TM_P60",s[s.TM_P60II=4]="TM_P60II",s[s.TM_P80=5]="TM_P80",s[s.TM_T20=6]="TM_T20",s[s.TM_T60=7]="TM_T60",s[s.TM_T70=8]="TM_T70",s[s.TM_T81=9]="TM_T81",s[s.TM_T82=10]="TM_T82",s[s.TM_T83=11]="TM_T83",s[s.TM_T88=12]="TM_T88",s[s.TM_T90=13]="TM_T90",s[s.TM_T90KP=14]="TM_T90KP",s[s.TM_U220=15]="TM_U220",s[s.TM_U330=16]="TM_U330",s[s.TM_L90=17]="TM_L90",s[s.TM_H6000=18]="TM_H6000",s[s.TM_T83III=19]="TM_T83III",s[s.TM_T100=20]="TM_T100",s[s.TM_M30II=21]="TM_M30II",s[s.TM_M50=23]="TM_M50",s[s.TM_T88VII=24]="TM_T88VII",s[s.TM_L90LFC=25]="TM_L90LFC",s[s.TM_L100=26]="TM_L100",s[s.TM_P20II=27]="TM_P20II",s[s.TM_P80II=28]="TM_P80II",s[s.TM_M30III=29]="TM_M30III",s[s.TM_M50II=30]="TM_M50II",s[s.TM_M55=31]="TM_M55",s[s.TM_U220II=32]="TM_U220II",s))(q||{});var p=class t extends h{constructor(r,n,i,o,T){super(n,i,o,T);this.isHardwareError=r;this.name="PrinterError",Object.setPrototypeOf(this,t.prototype)}},z=t=>{if(t instanceof p)return t.isHardwareError;let e=String(t.message||t).toUpperCase();return e.includes("ERR_OFF_LINE")||e.includes("ERR_COVER_OPEN")||e.includes("ERR_PAPER_OUT")||e.includes("ERR_FAILURE")||e.includes("DISCONNECT")||e.includes("PRINT_TIMEOUT")||e.includes("ERROR CODE: 4")||e.includes("ERROR CODE: 7")||e.includes("ERROR CODE: 3")},ne=t=>{if(t instanceof p)return t;let e=f(t),r=z(t);return new p(r,e.code,e.translationCode,e.message,e.originalError)};var M=require("react-native"),m=M.NativeModules.MunchiEpsonModule,G=()=>m?new M.NativeEventEmitter(m):null,_e=t=>new Promise(e=>setTimeout(e,t)),Oe=t=>{if(!t||typeof t!="object")return"";let e=t.code;return typeof e=="string"?e.toUpperCase():""},ye=t=>{if(t instanceof Error)return t.message.toUpperCase();if(t&&typeof t=="object"){let e=t.message;if(typeof e=="string")return e.toUpperCase()}return String(t).toUpperCase()},N=(t,e,r)=>t.includes(r)||e===r||e.includes(r),S=async(t,e=3,r=500)=>{try{return await t()}catch(n){if(e<=1)throw n;let i=ye(n),o=Oe(n);if(N(i,o,"TARGET_IN_USE"))throw n;if(N(i,o,"BUSY")||N(i,o,"IN_USE")||N(i,o,"ERR_IN_USE")||N(i,o,"PRINT_BUSY")||N(i,o,"ERR_CONNECT")||N(i,o,"CONNECT_ERROR")||N(i,o,"ERR_TIMEOUT")||N(i,o,"PRINT_TIMEOUT"))return await _e(r),S(t,e-1,r);throw n}};var ve=new Set([0,3,5,21]),w=class{constructor(e){this.config=e}statusSubscription=null;connectionSubscription=null;connectionCallbacks=new Set;emitStatus(e){for(let r of this.connectionCallbacks)r(e)}ensureStatusListener(){if(this.statusSubscription)return;let e=G();e&&(this.config.logger?.info?.("[EpsonPrinter] Starting status listener for queue management"),this.statusSubscription=e.addListener("onPrinterStatusChange",r=>{if(!this.config.getSessionId()||r.sessionId!==this.config.getSessionId())return;let n=`[EpsonPrinter] Received Status Event: ${r.eventType}`;this.config.logger?.info?.(n),this.config.onEvent({connectionStatus:null,statusEventType:r.eventType,isRecoveryEvent:ve.has(r.eventType)})}))}ensureConnectionListener(){if(this.connectionSubscription)return;let e=G();e&&(this.connectionSubscription=e.addListener("onPrinterConnectionChange",r=>{if(!this.config.getSessionId()||r.sessionId!==this.config.getSessionId())return;let n="UNKNOWN";switch(r.status){case"RECONNECTING":n="RECONNECTING";break;case"RECONNECTED":n="CONNECTED";break;case"DISCONNECTED":n="DISCONNECTED";break;default:n="UNKNOWN"}this.config.onEvent({connectionStatus:n,statusEventType:null,isRecoveryEvent:!1}),this.emitStatus(n)}))}removeStatusListener(){this.statusSubscription&&(this.statusSubscription.remove(),this.statusSubscription=null)}onConnectionChange(e){return this.connectionCallbacks.add(e),e(this.config.getConnectionStatus()),this.ensureConnectionListener(),()=>{this.connectionCallbacks.delete(e),this.connectionCallbacks.size===0&&this.connectionSubscription&&(this.connectionSubscription.remove(),this.connectionSubscription=null)}}};var b=(n=>(n.Small="Small",n.Medium="Medium",n.Large="Large",n))(b||{});var De=(t,e=!1)=>{let r={Small:{normal:{width:1,height:1},item:{width:1,height:1}},Medium:{normal:{width:2,height:2},item:{width:2,height:2}},Large:{normal:{width:2,height:2},item:{width:3,height:3}}},n=e?"item":"normal";return r[t]?.[n]??r.Small.normal},ie=t=>{if(typeof t!="object"||t===null)return null;let e=t;return{target:String(e.target||""),name:String(e.name||""),macAddress:e.macAddress?String(e.macAddress):void 0,ipAddress:e.ipAddress?String(e.ipAddress):void 0,bdAddress:e.bdAddress?String(e.bdAddress):void 0,type:"EPSON"}},se=t=>t.commands.map(e=>{switch(e.type){case"text":return{cmd:"addText",data:e.text,align:e.align,bold:e.bold,underline:e.underline,size:e.size};case"align":return{cmd:"addTextAlign",align:e.align};case"bold":return{cmd:"addTextStyle",bold:e.value};case"fontSize":{let r=De(e.size,e.isItemName);return{cmd:"addTextSize",width:r.width,height:r.height}}case"newline":return{cmd:"addFeedLine",line:e.lines||1};case"separator":return{cmd:"addText",data:`------------------
+"use strict";var he=Object.create;var D=Object.defineProperty;var Ee=Object.getOwnPropertyDescriptor;var Ce=Object.getOwnPropertyNames;var Re=Object.getPrototypeOf,fe=Object.prototype.hasOwnProperty;var Ne=(t,e)=>{for(var r in e)D(t,r,{get:e[r],enumerable:!0})},J=(t,e,r,n)=>{if(e&&typeof e=="object"||typeof e=="function")for(let i of Ce(e))!fe.call(t,i)&&i!==r&&D(t,i,{get:()=>e[i],enumerable:!(n=Ee(e,i))||n.enumerable});return t};var pe=(t,e,r)=>(r=t!=null?he(Re(t)):{},J(e||!t||!t.__esModule?D(r,"default",{value:t,enumerable:!0}):r,t)),Pe=t=>J(D({},"__esModule",{value:!0}),t);var Be={};Ne(Be,{Epos2CallbackCode:()=>te,Epos2ConnectionEvent:()=>Z,Epos2ErrorStatus:()=>ee,Epos2Font:()=>re,Epos2Lang:()=>V,Epos2StatusEvent:()=>H,EpsonModel:()=>G,FontSize:()=>b,MunchiPrinterError:()=>h,PrinterError:()=>N,PrinterErrorCode:()=>y,PrinterProvider:()=>Ue,PrinterTranslationCode:()=>v,VERSION:()=>Te,discoverPrinters:()=>ce,getGlobalLogger:()=>Y,getPrinter:()=>K,resolveEpsonError:()=>Le,resolveModelFromBluetoothName:()=>le,resolvePrinterError:()=>de,setGlobalLogger:()=>B,usePrinter:()=>k,usePrinterStatus:()=>Fe});module.exports=Pe(Be);var j={},B=t=>{j.logger=t},Y=()=>j.logger;var W=require("react-native");var y=(T=>(T.CONNECTION_FAILED="CONNECTION_FAILED",T.PRINT_FAILED="PRINT_FAILED",T.DISCOVERY_FAILED="DISCOVERY_FAILED",T.TIMEOUT="TIMEOUT",T.NATIVE_MODULE_MISSING="NATIVE_MODULE_MISSING",T.UNKNOWN="UNKNOWN",T))(y||{}),v=(c=>(c.ERR_PRINTER_RECONNECT_REQUIRED="printer.error.reconnect_required",c.ERR_PRINTER_OFFLINE="printer.error.offline",c.ERR_PRINTER_BUSY="printer.error.busy",c.ERR_PRINTER_COVER_OPEN="printer.error.cover_open",c.ERR_PRINTER_PAPER_EMPTY="printer.error.paper_empty",c.ERR_CONNECTION_TIMEOUT="printer.error.connection_timeout",c.ERR_UNKNOWN="printer.error.unknown",c))(v||{}),h=class t extends Error{constructor(r,n,i,o){super(i);this.code=r;this.translationCode=n;this.originalError=o;this.name="MunchiPrinterError",Object.setPrototypeOf(this,t.prototype)}};var Ie=t=>{if(!t||typeof t!="object")return"";let e=t.code;return typeof e=="string"?e:""},Se=t=>{if(t instanceof Error)return t.message;if(t&&typeof t=="object"){let e=t.message;if(typeof e=="string")return e}return String(t)},d=(t,e,r)=>t.includes(r)||e===r||e.includes(r),R=t=>{if(t instanceof h)return t;let e=Se(t),r=Ie(t),n=e.toUpperCase(),i=r.toUpperCase();return n.includes("ERROR CODE: 4")?new h("PRINT_FAILED","printer.error.cover_open","Printer cover is open",t):n.includes("ERROR CODE: 3")?new h("PRINT_FAILED","printer.error.busy","Printer is performing auto-recovery",t):n.includes("ERROR CODE: 7")?new h("PRINT_FAILED","printer.error.paper_empty","Printer paper is empty",t):d(n,i,"TARGET_IN_USE")||d(n,i,"BUSY")||d(n,i,"DEVICE_BUSY")||d(n,i,"IN_USE")||d(n,i,"ERR_IN_USE")||d(n,i,"PROCESSING")||d(n,i,"ERR_PROCESSING")||d(n,i,"PRINT_BUSY")||d(n,i,"PRINTING")||d(n,i,"DISCOVERY_BUSY")?new h("TIMEOUT","printer.error.busy","Printer is busy",t):d(n,i,"TIMEOUT")||d(n,i,"ERR_TIMEOUT")||d(n,i,"PRINT_TIMEOUT")?new h("TIMEOUT","printer.error.connection_timeout","Operation timed out",t):d(n,i,"PRINTER_RECONNECT_REQUIRED")||n.includes("RECONNECT THE PRINTER")?new h("CONNECTION_FAILED","printer.error.reconnect_required",e,t):d(n,i,"PERMISSION_DENIED")||d(n,i,"LOCATION_DISABLED")||d(n,i,"BLUETOOTH_DISABLED")?new h("CONNECTION_FAILED","printer.error.offline",e,t):d(n,i,"DISCOVERY_ERROR")||n.includes("DISCOVERY")?new h("DISCOVERY_FAILED","printer.error.unknown",e,t):d(n,i,"PRINTER_OFFLINE")||d(n,i,"SESSION_ERROR")||d(n,i,"STATUS_ERROR")||d(n,i,"INIT_ERROR")||d(n,i,"PRINT_CANCELED")||d(n,i,"DISCONNECT")||d(n,i,"ERR_DISCONNECT")||n.includes("PRINTER NOT CONNECTED")||n.includes("OFFLINE")?new h("CONNECTION_FAILED","printer.error.offline",n.includes("OFFLINE")?e:"Printer disconnected",t):d(n,i,"CONNECT_ERROR")||n.includes("FAILED TO CONNECT")||d(n,i,"ERR_CONNECT")?new h("CONNECTION_FAILED","printer.error.offline","Failed to connect to printer",t):d(n,i,"PRINT_ERROR")||d(n,i,"PRINT_FAILURE")?new h("PRINT_FAILED","printer.error.unknown",e,t):new h("UNKNOWN","printer.error.unknown",e,t)};var H=(a=>(a[a.ONLINE=0]="ONLINE",a[a.OFFLINE=1]="OFFLINE",a[a.POWER_OFF=2]="POWER_OFF",a[a.COVER_CLOSE=3]="COVER_CLOSE",a[a.COVER_OPEN=4]="COVER_OPEN",a[a.PAPER_OK=5]="PAPER_OK",a[a.PAPER_NEAR_END=6]="PAPER_NEAR_END",a[a.PAPER_EMPTY=7]="PAPER_EMPTY",a[a.DRAWER_HIGH=8]="DRAWER_HIGH",a[a.DRAWER_LOW=9]="DRAWER_LOW",a[a.BATTERY_ENOUGH=10]="BATTERY_ENOUGH",a[a.BATTERY_EMPTY=11]="BATTERY_EMPTY",a[a.AUTO_RECOVER_ERROR=20]="AUTO_RECOVER_ERROR",a[a.AUTO_RECOVER_OK=21]="AUTO_RECOVER_OK",a[a.UNRECOVERABLE_ERROR=22]="UNRECOVERABLE_ERROR",a))(H||{}),Z=(n=>(n[n.RECONNECTING=0]="RECONNECTING",n[n.RECONNECT=1]="RECONNECT",n[n.DISCONNECT=2]="DISCONNECT",n))(Z||{}),ee=(u=>(u[u.SUCCESS=0]="SUCCESS",u[u.ERR_PARAM=1]="ERR_PARAM",u[u.ERR_CONNECT=2]="ERR_CONNECT",u[u.ERR_TIMEOUT=3]="ERR_TIMEOUT",u[u.ERR_MEMORY=4]="ERR_MEMORY",u[u.ERR_ILLEGAL=5]="ERR_ILLEGAL",u[u.ERR_PROCESSING=6]="ERR_PROCESSING",u[u.ERR_NOT_FOUND=7]="ERR_NOT_FOUND",u[u.ERR_IN_USE=8]="ERR_IN_USE",u[u.ERR_TYPE_INVALID=9]="ERR_TYPE_INVALID",u[u.ERR_DISCONNECT=10]="ERR_DISCONNECT",u[u.ERR_ALREADY_OPENED=11]="ERR_ALREADY_OPENED",u[u.ERR_ALREADY_USED=12]="ERR_ALREADY_USED",u[u.ERR_BOX_COUNT_OVER=13]="ERR_BOX_COUNT_OVER",u[u.ERR_BOX_CLIENT_OVER=14]="ERR_BOX_CLIENT_OVER",u[u.ERR_UNSUPPORTED=15]="ERR_UNSUPPORTED",u[u.ERR_DEVICE_BUSY=16]="ERR_DEVICE_BUSY",u[u.ERR_RECOVERY_FAILURE=17]="ERR_RECOVERY_FAILURE",u[u.ERR_FAILURE=255]="ERR_FAILURE",u))(ee||{}),te=(m=>(m[m.SUCCESS=0]="SUCCESS",m[m.ERR_TIMEOUT=1]="ERR_TIMEOUT",m[m.ERR_NOT_FOUND=2]="ERR_NOT_FOUND",m[m.ERR_AUTORECOVER=3]="ERR_AUTORECOVER",m[m.ERR_COVER_OPEN=4]="ERR_COVER_OPEN",m[m.ERR_CUTTER=5]="ERR_CUTTER",m[m.ERR_MECHANICAL=6]="ERR_MECHANICAL",m[m.ERR_EMPTY=7]="ERR_EMPTY",m[m.ERR_UNRECOVERABLE=8]="ERR_UNRECOVERABLE",m[m.ERR_SYSTEM=9]="ERR_SYSTEM",m[m.ERR_PORT=10]="ERR_PORT",m[m.ERR_FAILURE=255]="ERR_FAILURE",m))(te||{}),V=(l=>(l[l.EN=0]="EN",l[l.JA=1]="JA",l[l.ZH_CN=2]="ZH_CN",l[l.ZH_TW=3]="ZH_TW",l[l.KO=4]="KO",l[l.TH=5]="TH",l[l.VI=6]="VI",l[l.MULTI=7]="MULTI",l))(V||{}),re=(o=>(o[o.FONT_A=0]="FONT_A",o[o.FONT_B=1]="FONT_B",o[o.FONT_C=2]="FONT_C",o[o.FONT_D=3]="FONT_D",o[o.FONT_E=4]="FONT_E",o))(re||{}),G=(s=>(s[s.TM_M10=0]="TM_M10",s[s.TM_M30=1]="TM_M30",s[s.TM_P20=2]="TM_P20",s[s.TM_P60=3]="TM_P60",s[s.TM_P60II=4]="TM_P60II",s[s.TM_P80=5]="TM_P80",s[s.TM_T20=6]="TM_T20",s[s.TM_T60=7]="TM_T60",s[s.TM_T70=8]="TM_T70",s[s.TM_T81=9]="TM_T81",s[s.TM_T82=10]="TM_T82",s[s.TM_T83=11]="TM_T83",s[s.TM_T88=12]="TM_T88",s[s.TM_T90=13]="TM_T90",s[s.TM_T90KP=14]="TM_T90KP",s[s.TM_U220=15]="TM_U220",s[s.TM_U330=16]="TM_U330",s[s.TM_L90=17]="TM_L90",s[s.TM_H6000=18]="TM_H6000",s[s.TM_T83III=19]="TM_T83III",s[s.TM_T100=20]="TM_T100",s[s.TM_M30II=21]="TM_M30II",s[s.TM_M50=23]="TM_M50",s[s.TM_T88VII=24]="TM_T88VII",s[s.TM_L90LFC=25]="TM_L90LFC",s[s.TM_L100=26]="TM_L100",s[s.TM_P20II=27]="TM_P20II",s[s.TM_P80II=28]="TM_P80II",s[s.TM_M30III=29]="TM_M30III",s[s.TM_M50II=30]="TM_M50II",s[s.TM_M55=31]="TM_M55",s[s.TM_U220II=32]="TM_U220II",s))(G||{});var N=class t extends h{constructor(r,n,i,o,T){super(n,i,o,T);this.isHardwareError=r;this.name="PrinterError",Object.setPrototypeOf(this,t.prototype)}},q=t=>{if(t instanceof N)return t.isHardwareError;let e=String(t.message||t).toUpperCase();return e.includes("ERR_OFF_LINE")||e.includes("ERR_COVER_OPEN")||e.includes("ERR_PAPER_OUT")||e.includes("ERR_FAILURE")||e.includes("DISCONNECT")||e.includes("PRINT_TIMEOUT")||e.includes("ERROR CODE: 4")||e.includes("ERROR CODE: 7")||e.includes("ERROR CODE: 3")},ne=t=>{if(t instanceof N)return t;let e=R(t),r=q(t);return new N(r,e.code,e.translationCode,e.message,e.originalError)};var M=require("react-native"),g=M.NativeModules.MunchiEpsonModule,z=()=>g?new M.NativeEventEmitter(g):null,_e=t=>new Promise(e=>setTimeout(e,t)),Oe=t=>{if(!t||typeof t!="object")return"";let e=t.code;return typeof e=="string"?e.toUpperCase():""},ye=t=>{if(t instanceof Error)return t.message.toUpperCase();if(t&&typeof t=="object"){let e=t.message;if(typeof e=="string")return e.toUpperCase()}return String(t).toUpperCase()},p=(t,e,r)=>t.includes(r)||e===r||e.includes(r),S=async(t,e=3,r=500)=>{try{return await t()}catch(n){if(e<=1)throw n;let i=ye(n),o=Oe(n);if(p(i,o,"TARGET_IN_USE"))throw n;if(p(i,o,"BUSY")||p(i,o,"IN_USE")||p(i,o,"ERR_IN_USE")||p(i,o,"PRINT_BUSY")||p(i,o,"ERR_CONNECT")||p(i,o,"CONNECT_ERROR")||p(i,o,"ERR_TIMEOUT")||p(i,o,"PRINT_TIMEOUT"))return await _e(r),S(t,e-1,r);throw n}};var ve=new Set([0,3,5,21]),w=class{constructor(e){this.config=e}statusSubscription=null;connectionSubscription=null;connectionCallbacks=new Set;emitStatus(e){for(let r of this.connectionCallbacks)r(e)}ensureStatusListener(){if(this.statusSubscription)return;let e=z();e&&(this.config.logger?.info?.("[EpsonPrinter] Starting status listener for queue management"),this.statusSubscription=e.addListener("onPrinterStatusChange",r=>{if(!this.config.getSessionId()||r.sessionId!==this.config.getSessionId())return;let n=`[EpsonPrinter] Received Status Event: ${r.eventType}`;this.config.logger?.info?.(n),this.config.onEvent({connectionStatus:null,statusEventType:r.eventType,isRecoveryEvent:ve.has(r.eventType)})}))}ensureConnectionListener(){if(this.connectionSubscription)return;let e=z();e&&(this.connectionSubscription=e.addListener("onPrinterConnectionChange",r=>{if(!this.config.getSessionId()||r.sessionId!==this.config.getSessionId())return;let n="UNKNOWN";switch(r.status){case"RECONNECTING":n="RECONNECTING";break;case"RECONNECTED":n="CONNECTED";break;case"DISCONNECTED":n="DISCONNECTED";break;default:n="UNKNOWN"}this.config.onEvent({connectionStatus:n,statusEventType:null,isRecoveryEvent:!1}),this.emitStatus(n)}))}removeStatusListener(){this.statusSubscription&&(this.statusSubscription.remove(),this.statusSubscription=null)}onConnectionChange(e){return this.connectionCallbacks.add(e),e(this.config.getConnectionStatus()),this.ensureConnectionListener(),()=>{this.connectionCallbacks.delete(e),this.connectionCallbacks.size===0&&this.connectionSubscription&&(this.connectionSubscription.remove(),this.connectionSubscription=null)}}};var b=(n=>(n.Small="Small",n.Medium="Medium",n.Large="Large",n))(b||{});var De=(t,e=!1)=>{let r={Small:{normal:{width:1,height:1},item:{width:1,height:1}},Medium:{normal:{width:2,height:2},item:{width:2,height:2}},Large:{normal:{width:2,height:2},item:{width:3,height:3}}},n=e?"item":"normal";return r[t]?.[n]??r.Small.normal},ie=t=>{if(typeof t!="object"||t===null)return null;let e=t;return{target:String(e.target||""),name:String(e.name||""),macAddress:e.macAddress?String(e.macAddress):void 0,ipAddress:e.ipAddress?String(e.ipAddress):void 0,bdAddress:e.bdAddress?String(e.bdAddress):void 0,type:"EPSON"}},se=t=>t.commands.map(e=>{switch(e.type){case"text":return{cmd:"addText",data:e.text,align:e.align,bold:e.bold,underline:e.underline,size:e.size};case"align":return{cmd:"addTextAlign",align:e.align};case"bold":return{cmd:"addTextStyle",bold:e.value};case"fontSize":{let r=De(e.size,e.isItemName);return{cmd:"addTextSize",width:r.width,height:r.height}}case"newline":return{cmd:"addFeedLine",line:e.lines||1};case"separator":return{cmd:"addText",data:`------------------
 `};case"textLang":return{cmd:"addTextLang",lang:e.lang};case"textFont":return{cmd:"addTextFont",font:e.font};case"image":return{cmd:"addImage",data:e.base64,width:e.width};case"cut":return{cmd:"addCut"};case"drawer":return{cmd:"addPulse"};case"barcode":return{cmd:"addBarcode",data:e.data,type:e.system,width:e.width,height:e.height};case"qr":return{cmd:"addSymbol",data:e.data,type:"QRCODE_MODEL_2",level:e.errorCorrection||"M",width:e.size||3};case"feed":return{cmd:"addFeedLine",line:e.lines};default:return null}}).filter(e=>e!==null);var oe=t=>{let e=[];if(t.settings?.fontSize){let r="Medium";t.settings.fontSize==="Small"&&(r="Small"),t.settings.fontSize==="Large"&&(r="Large"),e.push({type:"fontSize",size:r})}t.settings?.fontStyle==="Bold"&&e.push({type:"bold",value:!0}),e.push({type:"align",align:"center"}),t.tbl&&e.push({type:"text",text:`Table: ${t.tbl}
 `,bold:!0,size:"double-height"}),e.push({type:"text",text:`Order: ${t.id}
 `,bold:!0}),e.push({type:"text",text:`${t.ts}
@@ -8,4 +8,4 @@
 `,align:"center",bold:!0})}else i==="B"?e.push({type:"text",text:c+`
 `,bold:!0}):i==="R"?e.push({type:"text",text:c+`
 `,bold:!0}):e.push({type:"text",text:c+`
-`,align:"left"})}return e.push({type:"feed",lines:3}),e.push({type:"cut"}),{commands:e}};var x=class{constructor(e){this.logger=e}queue=Promise.resolve();isQueuePaused=!1;resumeQueueResolver=null;isPaused(){return this.isQueuePaused}pause(){this.isQueuePaused=!0}resume(){this.isQueuePaused&&(this.isQueuePaused=!1,this.resumeQueueResolver&&(this.resumeQueueResolver(),this.resumeQueueResolver=null))}async waitUntilResumed(){if(this.isQueuePaused)return new Promise(e=>{let r=this.resumeQueueResolver;this.resumeQueueResolver=()=>{r&&r(),e()}})}enqueue(e){return new Promise((r,n)=>{let i=async()=>{this.isQueuePaused&&(this.logger?.info?.("[EpsonPrinter] Queue is PAUSED. Waiting for resume..."),await this.waitUntilResumed(),this.logger?.info?.("[EpsonPrinter] Queue RESUMED."));try{let o=await e();r(o)}catch(o){n(o)}};this.queue=this.queue.then(i,i)})}enqueueBackground(e){this.queue=this.queue.then(e,e)}};var A=class{constructor(e){this.config=e}recoveryTimer=null;start(){this.recoveryTimer||(this.config.logger?.info?.("[EpsonPrinter] Starting recovery polling..."),this.recoveryTimer=setInterval(async()=>{try{let e=await this.config.getStatus();if(e.online&&!e.coverOpen&&e.errorStatus==="NONE")this.config.logger?.info?.("[EpsonPrinter] Poller detected healthy status. Requesting queue resume."),this.config.onRecovered();else{let n=`[EpsonPrinter] Polling... Status: Online=${e.online}, Cover=${e.coverOpen}, Err=${e.errorStatus}`;this.config.logger?.info?.(n)}}catch(e){this.config.logger?.error("[EpsonPrinter] Recovery poll failed",e)}},2e3))}stop(){this.recoveryTimer&&(this.config.logger?.info?.("[EpsonPrinter] Stopping recovery polling."),clearInterval(this.recoveryTimer),this.recoveryTimer=null)}};var L=class{constructor(e){this.logger=e}sessionId=null;sessionInitPromise=null;getSessionId(){return this.sessionId}async ensureSession(){if(!m)throw new Error("Native module not found");return this.sessionId?this.sessionId:this.sessionInitPromise?this.sessionInitPromise:(this.sessionInitPromise=m.initSession().then(e=>(this.sessionId=e,e)).finally(()=>{this.sessionInitPromise=null}),this.sessionInitPromise)}async disposeSession(){if(!m||!this.sessionId){this.sessionId=null;return}let e=this.sessionId;this.sessionId=null;try{await m.disposeSession(e)}catch(r){this.logger?.error("[EpsonPrinter] Dispose session failed",r)}}};var U=class{constructor(e){this.config=e}statusCallbacks=new Set;latestHardwareStatus=null;statusRefreshPromise=null;statusRefreshTimer=null;subscribe(e){return this.statusCallbacks.add(e),this.latestHardwareStatus?e(this.latestHardwareStatus):this.config.getConnectionStatus()!=="CONNECTED"?e(this.config.defaultStatus):this.refreshNow(),()=>{this.statusCallbacks.delete(e)}}handleStatusEvent(){this.scheduleRefresh()}handleConnected(){this.scheduleRefresh(0)}handleDisconnected(){this.clearRefreshTimer(),this.setHardwareStatus(this.config.defaultStatus)}clear(){this.clearRefreshTimer()}async refreshNow(){if(this.config.getConnectionStatus()!=="CONNECTED"){this.setHardwareStatus(this.config.defaultStatus);return}if(this.statusRefreshPromise){await this.statusRefreshPromise;return}this.statusRefreshPromise=(async()=>{try{let e=await this.config.getStatus();this.setHardwareStatus(e)}catch(e){this.config.logger?.error("[EpsonPrinter] Status refresh failed",e),this.latestHardwareStatus||this.setHardwareStatus(this.config.defaultStatus)}})().finally(()=>{this.statusRefreshPromise=null}),await this.statusRefreshPromise}emitHardwareStatus(e){for(let r of this.statusCallbacks)r(e)}setHardwareStatus(e){this.latestHardwareStatus=e,this.emitHardwareStatus(e)}clearRefreshTimer(){this.statusRefreshTimer&&(clearTimeout(this.statusRefreshTimer),this.statusRefreshTimer=null)}scheduleRefresh(e=150){this.config.getConnectionStatus()==="CONNECTED"&&(this.statusRefreshTimer||(this.statusRefreshTimer=setTimeout(()=>{this.statusRefreshTimer=null,this.refreshNow()},e)))}};var Q={online:!1,coverOpen:!1,paperEmpty:!1,paper:"EMPTY",errorStatus:"NONE",drawerOpen:!1},Me=5e3,F=class{disconnectTimer=null;connectionStatus="DISCONNECTED";isConnecting=!1;target=null;defaultTarget;model;lang;logger;sessionManager;queueController;recoveryController;statusController;eventRouter;constructor(e){this.logger=e.logger,this.defaultTarget=e.target??null,this.model=e.model,this.lang=e.lang??0,this.sessionManager=new L(this.logger),this.queueController=new x(this.logger),this.recoveryController=new A({logger:this.logger,getStatus:()=>this.getStatus(),onRecovered:()=>this.resumeQueue()}),this.statusController=new U({logger:this.logger,defaultStatus:Q,getConnectionStatus:()=>this.connectionStatus,getStatus:()=>this.getStatus()}),this.eventRouter=new w({logger:this.logger,getSessionId:()=>this.sessionManager.getSessionId(),getConnectionStatus:()=>this.connectionStatus,onEvent:r=>{r.statusEventType!==null&&(this.statusController.handleStatusEvent(),r.isRecoveryEvent&&this.queueController.isPaused()&&(this.logger?.info?.("[EpsonPrinter] Printer recovered (Event). Resuming queue..."),this.resumeQueue())),r.connectionStatus!==null&&(r.connectionStatus==="CONNECTED"&&(this.connectionStatus="CONNECTED"),r.connectionStatus==="CONNECTED"&&this.statusController.handleConnected(),r.connectionStatus==="DISCONNECTED"&&(this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected()))}})}resumeQueue(){if(!this.queueController.isPaused())return;this.logger?.info?.("[EpsonPrinter] Resuming queue..."),this.recoveryController.stop(),this.queueController.resume()}isIosConnectionRecoveryCandidate(e){return W.Platform.OS!=="ios"?!1:e.code==="CONNECTION_FAILED"||e.code==="TIMEOUT"&&e.translationCode==="printer.error.connection_timeout"||e.translationCode==="printer.error.offline"}hasTargetInUseToken(e){if(!e||typeof e!="object")return!1;let r=String(e.code??"").toUpperCase(),n=String(e.message??"").toUpperCase();return r.includes("TARGET_IN_USE")||n.includes("TARGET_IN_USE")}isIosConnectBusyRecoveryCandidate(e){return W.Platform.OS!=="ios"||e.translationCode!=="printer.error.busy"?!1:!this.hasTargetInUseToken(e.originalError)}async recoverIosSessionForPrint(){if(!m)throw new Error("Native module not found");let e=this.target??this.defaultTarget;if(!e)throw new Error("Printer target is required");let r=this.sessionManager.getSessionId();if(r)try{await m.disconnect(r)}catch(i){this.logger?.error("[EpsonPrinter] iOS recovery disconnect failed (best-effort)",i)}await this.sessionManager.disposeSession(),this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED");let n=await this.sessionManager.ensureSession();return await S(()=>m.connect(n,e,Me,this.model,this.lang)),this.target=e,this.connectionStatus="CONNECTED",this.eventRouter.emitStatus("CONNECTED"),this.eventRouter.ensureStatusListener(),this.eventRouter.ensureConnectionListener(),this.statusController.handleConnected(),n}async recoverIosSessionForConnect(e,r){if(!m)throw new Error("Native module not found");let n=this.sessionManager.getSessionId();if(n)try{await m.disconnect(n)}catch(o){this.logger?.error("[EpsonPrinter] iOS connect recovery disconnect failed (best-effort)",o)}await this.sessionManager.disposeSession(),this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED");let i=await this.sessionManager.ensureSession();await S(()=>m.connect(i,e,r,this.model,this.lang)),this.target=e,this.connectionStatus="CONNECTED",this.eventRouter.emitStatus("CONNECTED"),this.eventRouter.ensureStatusListener(),this.eventRouter.ensureConnectionListener(),this.statusController.handleConnected()}async connect(e,r=5e3){let n=e??this.defaultTarget;if(!n){let i=new Error("Printer target is required");throw this.logger?.error("[EpsonPrinter] Connect failed: missing target",i),i}return this.disconnectTimer&&(clearTimeout(this.disconnectTimer),this.disconnectTimer=null),this.queueController.enqueue(async()=>{if(!m){this.logger?.error("[EpsonPrinter] Native module not found");return}if(this.connectionStatus==="CONNECTED"&&this.target===n)return;let i=await this.sessionManager.ensureSession();this.isConnecting=!0,this.connectionStatus="CONNECTING",this.eventRouter.emitStatus("CONNECTING");let o=!1;try{await S(()=>m.connect(i,n,r,this.model,this.lang)),this.target=n,this.connectionStatus="CONNECTED",this.eventRouter.emitStatus("CONNECTED"),this.isConnecting=!1,this.eventRouter.ensureStatusListener(),this.eventRouter.ensureConnectionListener(),this.statusController.handleConnected()}catch(T){let c=f(T);if(!o&&this.isIosConnectBusyRecoveryCandidate(c)){o=!0,this.logger?.error("[EpsonPrinter] iOS busy connect suspected stale session. Recovering connection and retrying connect once...",c);try{await this.recoverIosSessionForConnect(n,r),this.logger?.info?.("[EpsonPrinter] iOS connect recovery succeeded."),this.isConnecting=!1;return}catch(l){let P=f(l);throw this.logger?.error("[EpsonPrinter] iOS connect recovery failed",P),this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED"),this.isConnecting=!1,P}}throw this.logger?.error(`[EpsonPrinter] Connect failed for ${n}`,c),this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED"),this.isConnecting=!1,c}})}async print(e){if(!m)return;this.disconnectTimer&&(clearTimeout(this.disconnectTimer),this.disconnectTimer=null);let r=0,n=!1;return this.queueController.enqueue(async()=>{let i=await this.sessionManager.ensureSession(),o=se(e);for(;;){r++,this.logger?.info?.(`[EpsonPrinter] Print attempt ${r}`);try{await S(()=>m.print(i,o));break}catch(T){let c=ne(T);if(!n&&this.isIosConnectionRecoveryCandidate(c)){n=!0,this.logger?.error("[EpsonPrinter] iOS stale session suspected. Recovering connection and retrying print once...",c);try{i=await this.recoverIosSessionForPrint(),this.logger?.info?.("[EpsonPrinter] iOS session recovery succeeded. Retrying print...");continue}catch(l){let P=f(l);throw this.logger?.error("[EpsonPrinter] iOS session recovery failed",P),P}}if(c.isHardwareError){this.queueController.pause(),this.logger?.error(`[EpsonPrinter] Hardware error on attempt ${r}. Waiting for recovery before retry...`,c),this.recoveryController.start(),await this.queueController.waitUntilResumed(),this.logger?.info?.("[EpsonPrinter] Recovery detected. Sending cut to flush partial print before retry...");try{await m.print(i,[{cmd:"addCut"}])}catch{}this.logger?.info?.("[EpsonPrinter] Retrying print job...")}else throw this.logger?.error(`[EpsonPrinter] Print failed (non-recoverable) on attempt ${r}`,c),c}}}).finally(()=>{this.disconnectTimer&&clearTimeout(this.disconnectTimer),this.disconnectTimer=setTimeout(()=>{this.performDisconnect()},5e3)})}performDisconnect(){this.queueController.enqueueBackground(async()=>{if(!this.disconnectTimer)return;let e=this.sessionManager.getSessionId();if(m&&this.connectionStatus==="CONNECTED"&&e)try{await m.disconnect(e),this.connectionStatus="DISCONNECTED",this.target=null,this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED"),await this.sessionManager.disposeSession()}catch(r){this.logger?.error("[EpsonPrinter] Auto-Disconnect failed",r)}this.disconnectTimer=null})}async printEmbedded(e){try{let r=oe(e);return await this.print(r)}catch(r){let n=f(r);throw String(r).includes("MunchiPrinterError")||this.logger?.error("[EpsonPrinter] Embedded print failed",n),n}}async disconnect(){return this.disconnectTimer&&(clearTimeout(this.disconnectTimer),this.disconnectTimer=null),this.queueController.enqueue(async()=>{if(!m)return;let e=this.sessionManager.getSessionId();if(e)try{await m.disconnect(e),this.connectionStatus="DISCONNECTED",this.target=null,this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED"),this.eventRouter.removeStatusListener(),this.recoveryController.stop()}catch(r){this.logger?.error("[EpsonPrinter] Disconnect failed",r)}finally{this.statusController.clear(),await this.sessionManager.disposeSession()}})}async getStatus(){if(!m)return Q;let e=this.sessionManager.getSessionId();if(!e)return Q;try{return await m.getStatus(e)}catch(r){throw this.logger?.error("[EpsonPrinter] GetStatus failed",r),f(r)}}async openDrawer(){let e={commands:[{type:"drawer"}]};return this.print(e)}onConnectionChange(e){return this.eventRouter.onConnectionChange(e)}onStatusChange(e){return this.statusController.subscribe(e)}};var ue=require("react-native");var ae=ue.NativeModules.MunchiEpsonModule,we={bluetooth:["BT:"],tcp:["TCP:","TCPS:"],usb:["USB:"]},be=t=>t.includes("[local_"),xe=(t,e)=>e?we[e].some(n=>t.startsWith(n)):!0,ce=async t=>{if(!ae)return console.warn("[EpsonDiscovery] Native module not found"),[];try{return(await ae.discover({timeout:t.timeout})).map(ie).filter(r=>!r||be(r.target)?!1:xe(r.target,t.connectionType))}catch(e){let r=f(e);throw console.error("[EpsonDiscovery] Discovery failed",r),r}};var Ae=[[/^TM-m10/i,0],[/^TM-m30III/i,29],[/^TM-m30II/i,21],[/^TM-m30/i,1],[/^TM-m50II/i,30],[/^TM-m50/i,23],[/^TM-m55/i,31],[/^TM-P20II/i,27],[/^TM-P20/i,2],[/^TM-P60II/i,4],[/^TM-P60/i,3],[/^TM-P80II/i,28],[/^TM-P80/i,5],[/^TM-T20/i,6],[/^TM-T60/i,7],[/^TM-T70/i,8],[/^TM-T81/i,9],[/^TM-T82/i,10],[/^TM-T83III/i,19],[/^TM-T83/i,11],[/^TM-T88VII/i,24],[/^TM-T88/i,12],[/^TM-T90KP/i,14],[/^TM-T90/i,13],[/^TM-T100/i,20],[/^TM-U220II/i,32],[/^TM-U220/i,15],[/^TM-U330/i,16],[/^TM-L90LFC/i,25],[/^TM-L90/i,17],[/^TM-L100/i,26],[/^TM-H6000/i,18]],le=t=>{for(let[e,r]of Ae)if(e.test(t))return r;return null};var de=t=>{let e=f(t),r=e.message.toUpperCase(),n=t instanceof p?t.isHardwareError:z(t),i=e.translationCode==="printer.error.busy"||r.includes("BUSY")||r.includes("IN_USE")||r.includes("PRINT_BUSY"),o=e.code==="TIMEOUT"||e.translationCode==="printer.error.connection_timeout"||r.includes("TIMEOUT"),T=e.code==="CONNECTION_FAILED"||e.translationCode==="printer.error.offline",c=e.code==="DISCOVERY_FAILED",l="UNKNOWN";return n?l="HARDWARE":i?l="BUSY":o?l="TIMEOUT":T?l="CONNECTION":c?l="DISCOVERY":e.code==="PRINT_FAILED"&&(l="PRINT"),{code:e.code,translationCode:e.translationCode,message:e.message,category:l,isHardwareError:n,retryable:i||o,shouldPauseQueue:n,raw:t}},Le=t=>de(t);var me=Ne(require("react")),R=require("react");var ge=(0,R.createContext)(void 0),Ue=({config:t,logger:e,children:r})=>{let[n,i]=(0,R.useState)();(0,R.useEffect)(()=>{e&&B(e)},[e]);let o=(0,R.useMemo)(()=>{let c={...t,logger:e??t.logger};return K(c)},[t.lang,t.model,t.target,e]),T=(0,R.useMemo)(()=>({printer:o,config:t,isReady:!0,error:n}),[o,t,n]);return me.default.createElement(ge.Provider,{value:T},r)},k=()=>{let t=(0,R.useContext)(ge);if(!t)throw new Error("usePrinter must be used within a PrinterProvider");return t};var E=require("react");function Fe(t={}){let{enabled:e=!0}=t,{printer:r,config:n}=k(),[i,o]=(0,E.useState)("DISCONNECTED"),[T,c]=(0,E.useState)(null),[l,P]=(0,E.useState)(null),X=(0,E.useRef)("DISCONNECTED"),$=(0,E.useRef)(null),d=l!==null,I=(0,E.useCallback)(C=>{$.current=C,P(C)},[]),_=(0,E.useCallback)(C=>{if(C instanceof Error&&C.message){I(C.message);return}if(typeof C=="string"&&C.length>0){I(C);return}I("Unknown printer error")},[I]),a=(0,E.useCallback)(()=>{$.current!==null&&I(null)},[I]);return(0,E.useEffect)(()=>r.onConnectionChange(O=>{X.current=O,o(O),O==="CONNECTED"&&a()}),[a,r]),(0,E.useEffect)(()=>e?r.onStatusChange(O=>{c(O),a()}):void 0,[a,e,r]),(0,E.useEffect)(()=>{e&&i==="CONNECTED"&&r.getStatus().then(C=>{c(C),a()}).catch(_)},[_,a,i,e,r]),(0,E.useEffect)(()=>{let C=X.current;if(e){C==="DISCONNECTED"&&i==="DISCONNECTED"&&r.connect(n.target,5e3).then(a).catch(_);return}(i==="CONNECTED"||i==="CONNECTING")&&r.disconnect().then(a).catch(_)},[_,a,n.target,i,e,r]),{connectionStatus:i,hardwareStatus:T,isError:d,errorMessage:l}}var Te="1.0.7";function K(t){return new F({...t,logger:t.logger??Y()})}0&&(module.exports={Epos2CallbackCode,Epos2ConnectionEvent,Epos2ErrorStatus,Epos2Font,Epos2Lang,Epos2StatusEvent,EpsonModel,FontSize,MunchiPrinterError,PrinterError,PrinterErrorCode,PrinterProvider,PrinterTranslationCode,VERSION,discoverPrinters,getGlobalLogger,getPrinter,resolveEpsonError,resolveModelFromBluetoothName,resolvePrinterError,setGlobalLogger,usePrinter,usePrinterStatus});
+`,align:"left"})}return e.push({type:"feed",lines:3}),e.push({type:"cut"}),{commands:e}};var x=class{constructor(e){this.logger=e}queue=Promise.resolve();isQueuePaused=!1;resumeQueueResolver=null;isPaused(){return this.isQueuePaused}pause(){this.isQueuePaused=!0}resume(){this.isQueuePaused&&(this.isQueuePaused=!1,this.resumeQueueResolver&&(this.resumeQueueResolver(),this.resumeQueueResolver=null))}async waitUntilResumed(){if(this.isQueuePaused)return new Promise(e=>{let r=this.resumeQueueResolver;this.resumeQueueResolver=()=>{r&&r(),e()}})}enqueue(e){return new Promise((r,n)=>{let i=async()=>{this.isQueuePaused&&(this.logger?.info?.("[EpsonPrinter] Queue is PAUSED. Waiting for resume..."),await this.waitUntilResumed(),this.logger?.info?.("[EpsonPrinter] Queue RESUMED."));try{let o=await e();r(o)}catch(o){n(o)}};this.queue=this.queue.then(i,i)})}enqueueBackground(e){this.queue=this.queue.then(e,e)}};var A=class{constructor(e){this.config=e}recoveryTimer=null;start(){this.recoveryTimer||(this.config.logger?.info?.("[EpsonPrinter] Starting recovery polling..."),this.recoveryTimer=setInterval(async()=>{try{let e=await this.config.getStatus();if(e.online&&!e.coverOpen&&e.errorStatus==="NONE")this.config.logger?.info?.("[EpsonPrinter] Poller detected healthy status. Requesting queue resume."),this.config.onRecovered();else{let n=`[EpsonPrinter] Polling... Status: Online=${e.online}, Cover=${e.coverOpen}, Err=${e.errorStatus}`;this.config.logger?.info?.(n)}}catch(e){this.config.logger?.error("[EpsonPrinter] Recovery poll failed",e)}},2e3))}stop(){this.recoveryTimer&&(this.config.logger?.info?.("[EpsonPrinter] Stopping recovery polling."),clearInterval(this.recoveryTimer),this.recoveryTimer=null)}};var L=class{constructor(e){this.logger=e}sessionId=null;sessionInitPromise=null;getSessionId(){return this.sessionId}async ensureSession(){if(!g)throw new Error("Native module not found");return this.sessionId?this.sessionId:this.sessionInitPromise?this.sessionInitPromise:(this.sessionInitPromise=g.initSession().then(e=>(this.sessionId=e,e)).finally(()=>{this.sessionInitPromise=null}),this.sessionInitPromise)}async disposeSession(){if(!g||!this.sessionId){this.sessionId=null;return}let e=this.sessionId;this.sessionId=null;try{await g.disposeSession(e)}catch(r){this.logger?.error("[EpsonPrinter] Dispose session failed",r)}}};var U=class{constructor(e){this.config=e}statusCallbacks=new Set;latestHardwareStatus=null;statusRefreshPromise=null;statusRefreshTimer=null;subscribe(e){return this.statusCallbacks.add(e),this.latestHardwareStatus?e(this.latestHardwareStatus):this.config.getConnectionStatus()!=="CONNECTED"?e(this.config.defaultStatus):this.refreshNow(),()=>{this.statusCallbacks.delete(e)}}handleStatusEvent(){this.scheduleRefresh()}handleConnected(){this.scheduleRefresh(0)}handleDisconnected(){this.clearRefreshTimer(),this.setHardwareStatus(this.config.defaultStatus)}clear(){this.clearRefreshTimer()}async refreshNow(){if(this.config.getConnectionStatus()!=="CONNECTED"){this.setHardwareStatus(this.config.defaultStatus);return}if(this.statusRefreshPromise){await this.statusRefreshPromise;return}this.statusRefreshPromise=(async()=>{try{let e=await this.config.getStatus();this.setHardwareStatus(e)}catch(e){this.config.logger?.error("[EpsonPrinter] Status refresh failed",e),this.latestHardwareStatus||this.setHardwareStatus(this.config.defaultStatus)}})().finally(()=>{this.statusRefreshPromise=null}),await this.statusRefreshPromise}emitHardwareStatus(e){for(let r of this.statusCallbacks)r(e)}setHardwareStatus(e){this.latestHardwareStatus=e,this.emitHardwareStatus(e)}clearRefreshTimer(){this.statusRefreshTimer&&(clearTimeout(this.statusRefreshTimer),this.statusRefreshTimer=null)}scheduleRefresh(e=150){this.config.getConnectionStatus()==="CONNECTED"&&(this.statusRefreshTimer||(this.statusRefreshTimer=setTimeout(()=>{this.statusRefreshTimer=null,this.refreshNow()},e)))}};var Q={online:!1,coverOpen:!1,paperEmpty:!1,paper:"EMPTY",errorStatus:"NONE",drawerOpen:!1},Me=5e3,F=class{disconnectTimer=null;connectionStatus="DISCONNECTED";isConnecting=!1;target=null;defaultTarget;model;lang;logger;sessionManager;queueController;recoveryController;statusController;eventRouter;constructor(e){this.logger=e.logger,this.defaultTarget=e.target??null,this.model=e.model,this.lang=e.lang??0,this.sessionManager=new L(this.logger),this.queueController=new x(this.logger),this.recoveryController=new A({logger:this.logger,getStatus:()=>this.getStatus(),onRecovered:()=>this.resumeQueue()}),this.statusController=new U({logger:this.logger,defaultStatus:Q,getConnectionStatus:()=>this.connectionStatus,getStatus:()=>this.getStatus()}),this.eventRouter=new w({logger:this.logger,getSessionId:()=>this.sessionManager.getSessionId(),getConnectionStatus:()=>this.connectionStatus,onEvent:r=>{r.statusEventType!==null&&(this.statusController.handleStatusEvent(),r.isRecoveryEvent&&this.queueController.isPaused()&&(this.logger?.info?.("[EpsonPrinter] Printer recovered (Event). Resuming queue..."),this.resumeQueue())),r.connectionStatus!==null&&(r.connectionStatus==="CONNECTED"&&(this.connectionStatus="CONNECTED"),r.connectionStatus==="CONNECTED"&&this.statusController.handleConnected(),r.connectionStatus==="DISCONNECTED"&&(this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected()))}})}resumeQueue(){if(!this.queueController.isPaused())return;this.logger?.info?.("[EpsonPrinter] Resuming queue..."),this.recoveryController.stop(),this.queueController.resume()}isIosConnectionRecoveryCandidate(e){return W.Platform.OS!=="ios"?!1:e.code==="CONNECTION_FAILED"||e.code==="TIMEOUT"&&e.translationCode==="printer.error.connection_timeout"||e.translationCode==="printer.error.offline"}hasTargetInUseToken(e){if(!e||typeof e!="object")return!1;let r=String(e.code??"").toUpperCase(),n=String(e.message??"").toUpperCase();return r.includes("TARGET_IN_USE")||n.includes("TARGET_IN_USE")}isIosConnectBusyRecoveryCandidate(e){return W.Platform.OS!=="ios"||e.translationCode!=="printer.error.busy"?!1:!this.hasTargetInUseToken(e.originalError)}async recoverIosSessionForPrint(){if(!g)throw new Error("Native module not found");let e=this.target??this.defaultTarget;if(!e)throw new Error("Printer target is required");let r=this.sessionManager.getSessionId();if(r)try{await g.disconnect(r)}catch(i){this.logger?.error("[EpsonPrinter] iOS recovery disconnect failed (best-effort)",i)}await this.sessionManager.disposeSession(),this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED");let n=await this.sessionManager.ensureSession();return await S(()=>g.connect(n,e,Me,this.model,this.lang)),this.target=e,this.connectionStatus="CONNECTED",this.eventRouter.emitStatus("CONNECTED"),this.eventRouter.ensureStatusListener(),this.eventRouter.ensureConnectionListener(),this.statusController.handleConnected(),n}async recoverIosSessionForConnect(e,r){if(!g)throw new Error("Native module not found");let n=this.sessionManager.getSessionId();if(n)try{await g.disconnect(n)}catch(o){this.logger?.error("[EpsonPrinter] iOS connect recovery disconnect failed (best-effort)",o)}await this.sessionManager.disposeSession(),this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED");let i=await this.sessionManager.ensureSession();await S(()=>g.connect(i,e,r,this.model,this.lang)),this.target=e,this.connectionStatus="CONNECTED",this.eventRouter.emitStatus("CONNECTED"),this.eventRouter.ensureStatusListener(),this.eventRouter.ensureConnectionListener(),this.statusController.handleConnected()}async connect(e,r=5e3){let n=e??this.defaultTarget;if(!n){let i=new Error("Printer target is required");throw this.logger?.error("[EpsonPrinter] Connect failed: missing target",i),i}return this.disconnectTimer&&(clearTimeout(this.disconnectTimer),this.disconnectTimer=null),this.queueController.enqueue(async()=>{if(!g){this.logger?.error("[EpsonPrinter] Native module not found");return}if(this.connectionStatus==="CONNECTED"&&this.target===n)return;let i=await this.sessionManager.ensureSession();this.isConnecting=!0,this.connectionStatus="CONNECTING",this.eventRouter.emitStatus("CONNECTING");let o=!1;try{await S(()=>g.connect(i,n,r,this.model,this.lang)),this.target=n,this.connectionStatus="CONNECTED",this.eventRouter.emitStatus("CONNECTED"),this.isConnecting=!1,this.eventRouter.ensureStatusListener(),this.eventRouter.ensureConnectionListener(),this.statusController.handleConnected()}catch(T){let c=R(T);if(!o&&this.isIosConnectBusyRecoveryCandidate(c)){o=!0,this.logger?.error("[EpsonPrinter] iOS busy connect suspected stale session. Recovering connection and retrying connect once...",c);try{await this.recoverIosSessionForConnect(n,r),this.logger?.info?.("[EpsonPrinter] iOS connect recovery succeeded."),this.isConnecting=!1;return}catch(l){let P=R(l);throw this.logger?.error("[EpsonPrinter] iOS connect recovery failed",P),this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED"),this.isConnecting=!1,P}}throw this.logger?.error(`[EpsonPrinter] Connect failed for ${n}`,c),this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED"),this.isConnecting=!1,c}})}async print(e){if(!g)return;this.disconnectTimer&&(clearTimeout(this.disconnectTimer),this.disconnectTimer=null);let r=0,n=!1;return this.queueController.enqueue(async()=>{let i=await this.sessionManager.ensureSession(),o=se(e);for(;;){r++,this.logger?.info?.(`[EpsonPrinter] Print attempt ${r}`);try{await S(()=>g.print(i,o));break}catch(T){let c=ne(T);if(!n&&this.isIosConnectionRecoveryCandidate(c)){n=!0,this.logger?.error("[EpsonPrinter] iOS stale session suspected. Recovering connection and retrying print once...",c);try{i=await this.recoverIosSessionForPrint(),this.logger?.info?.("[EpsonPrinter] iOS session recovery succeeded. Retrying print...");continue}catch(l){let P=R(l);throw this.logger?.error("[EpsonPrinter] iOS session recovery failed",P),P}}if(c.isHardwareError){this.queueController.pause(),this.logger?.error(`[EpsonPrinter] Hardware error on attempt ${r}. Waiting for recovery before retry...`,c),this.recoveryController.start(),await this.queueController.waitUntilResumed(),this.logger?.info?.("[EpsonPrinter] Recovery detected. Sending cut to flush partial print before retry...");try{await g.print(i,[{cmd:"addCut"}])}catch{}this.logger?.info?.("[EpsonPrinter] Retrying print job...")}else throw this.logger?.error(`[EpsonPrinter] Print failed (non-recoverable) on attempt ${r}`,c),c}}}).finally(()=>{this.disconnectTimer&&clearTimeout(this.disconnectTimer),this.disconnectTimer=setTimeout(()=>{this.performDisconnect()},5e3)})}performDisconnect(){this.queueController.enqueueBackground(async()=>{if(!this.disconnectTimer)return;let e=this.sessionManager.getSessionId();if(g&&this.connectionStatus==="CONNECTED"&&e)try{await g.disconnect(e),this.connectionStatus="DISCONNECTED",this.target=null,this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED"),await this.sessionManager.disposeSession()}catch(r){this.logger?.error("[EpsonPrinter] Auto-Disconnect failed",r)}this.disconnectTimer=null})}async printEmbedded(e){try{let r=oe(e);return await this.print(r)}catch(r){let n=R(r);throw String(r).includes("MunchiPrinterError")||this.logger?.error("[EpsonPrinter] Embedded print failed",n),n}}async disconnect(){return this.disconnectTimer&&(clearTimeout(this.disconnectTimer),this.disconnectTimer=null),this.queueController.enqueue(async()=>{if(!g)return;let e=this.sessionManager.getSessionId();if(e)try{await g.disconnect(e),this.connectionStatus="DISCONNECTED",this.target=null,this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED"),this.eventRouter.removeStatusListener(),this.recoveryController.stop()}catch(r){this.logger?.error("[EpsonPrinter] Disconnect failed",r)}finally{this.statusController.clear(),await this.sessionManager.disposeSession()}})}async getStatus(){if(!g)return Q;let e=this.sessionManager.getSessionId();if(!e)return Q;try{return await g.getStatus(e)}catch(r){throw this.logger?.error("[EpsonPrinter] GetStatus failed",r),R(r)}}async openDrawer(){let e={commands:[{type:"drawer"}]};return this.print(e)}onConnectionChange(e){return this.eventRouter.onConnectionChange(e)}onStatusChange(e){return this.statusController.subscribe(e)}};var ue=require("react-native");var ae=ue.NativeModules.MunchiEpsonModule,we={bluetooth:["BT:"],tcp:["TCP:","TCPS:"],usb:["USB:"]},be=t=>t.includes("[local_"),xe=(t,e)=>e?we[e].some(n=>t.startsWith(n)):!0,ce=async t=>{if(!ae)return console.warn("[EpsonDiscovery] Native module not found"),[];try{return(await ae.discover({timeout:t.timeout})).map(ie).filter(r=>!r||be(r.target)?!1:xe(r.target,t.connectionType))}catch(e){let r=R(e);throw console.error("[EpsonDiscovery] Discovery failed",r),r}};var Ae=[[/^TM-m10/i,0],[/^TM-m30III/i,29],[/^TM-m30II/i,21],[/^TM-m30/i,1],[/^TM-m50II/i,30],[/^TM-m50/i,23],[/^TM-m55/i,31],[/^TM-P20II/i,27],[/^TM-P20/i,2],[/^TM-P60II/i,4],[/^TM-P60/i,3],[/^TM-P80II/i,28],[/^TM-P80/i,5],[/^TM-T20/i,6],[/^TM-T60/i,7],[/^TM-T70/i,8],[/^TM-T81/i,9],[/^TM-T82/i,10],[/^TM-T83III/i,19],[/^TM-T83/i,11],[/^TM-T88VII/i,24],[/^TM-T88/i,12],[/^TM-T90KP/i,14],[/^TM-T90/i,13],[/^TM-T100/i,20],[/^TM-U220II/i,32],[/^TM-U220/i,15],[/^TM-U330/i,16],[/^TM-L90LFC/i,25],[/^TM-L90/i,17],[/^TM-L100/i,26],[/^TM-H6000/i,18]],le=t=>{for(let[e,r]of Ae)if(e.test(t))return r;return null};var de=t=>{let e=R(t),r=e.message.toUpperCase(),n=t instanceof N?t.isHardwareError:q(t),i=e.translationCode==="printer.error.busy"||r.includes("BUSY")||r.includes("IN_USE")||r.includes("PRINT_BUSY"),o=e.code==="TIMEOUT"||e.translationCode==="printer.error.connection_timeout"||r.includes("TIMEOUT"),T=e.code==="CONNECTION_FAILED"||e.translationCode==="printer.error.offline",c=e.code==="DISCOVERY_FAILED",l="UNKNOWN";return n?l="HARDWARE":i?l="BUSY":o?l="TIMEOUT":T?l="CONNECTION":c?l="DISCOVERY":e.code==="PRINT_FAILED"&&(l="PRINT"),{code:e.code,translationCode:e.translationCode,message:e.message,category:l,isHardwareError:n,retryable:i||o,shouldPauseQueue:n,raw:t}},Le=t=>de(t);var me=pe(require("react")),f=require("react");var ge=(0,f.createContext)(void 0),Ue=({config:t,logger:e,children:r})=>{let[n,i]=(0,f.useState)();(0,f.useEffect)(()=>{e&&B(e)},[e]);let o=(0,f.useMemo)(()=>{let c={...t,logger:e??t.logger};return K(c)},[t.lang,t.model,t.target,e]),T=(0,f.useMemo)(()=>({printer:o,config:t,isReady:!0,error:n}),[o,t,n]);return me.default.createElement(ge.Provider,{value:T},r)},k=()=>{let t=(0,f.useContext)(ge);if(!t)throw new Error("usePrinter must be used within a PrinterProvider");return t};var E=require("react");function Fe(t={}){let{enabled:e=!0}=t,{printer:r,config:n}=k(),[i,o]=(0,E.useState)("DISCONNECTED"),[T,c]=(0,E.useState)(null),[l,P]=(0,E.useState)(null),X=(0,E.useRef)("DISCONNECTED"),$=(0,E.useRef)(null),m=l!==null,I=(0,E.useCallback)(C=>{$.current=C,P(C)},[]),_=(0,E.useCallback)(C=>{if(C instanceof Error&&C.message){I(C.message);return}if(typeof C=="string"&&C.length>0){I(C);return}I("Unknown printer error")},[I]),a=(0,E.useCallback)(()=>{$.current!==null&&I(null)},[I]);return(0,E.useEffect)(()=>r.onConnectionChange(O=>{X.current=O,o(O),O==="CONNECTED"&&a()}),[a,r]),(0,E.useEffect)(()=>e?r.onStatusChange(O=>{c(O),a()}):void 0,[a,e,r]),(0,E.useEffect)(()=>{e&&i==="CONNECTED"&&r.getStatus().then(C=>{c(C),a()}).catch(_)},[_,a,i,e,r]),(0,E.useEffect)(()=>{let C=X.current;if(e){C==="DISCONNECTED"&&i==="DISCONNECTED"&&r.connect(n.target,5e3).then(a).catch(_);return}(i==="CONNECTED"||i==="CONNECTING")&&r.disconnect().then(a).catch(_)},[_,a,n.target,i,e,r]),{connectionStatus:i,hardwareStatus:T,isError:m,errorMessage:l}}var Te="1.0.9";function K(t){return new F({...t,logger:t.logger??Y()})}0&&(module.exports={Epos2CallbackCode,Epos2ConnectionEvent,Epos2ErrorStatus,Epos2Font,Epos2Lang,Epos2StatusEvent,EpsonModel,FontSize,MunchiPrinterError,PrinterError,PrinterErrorCode,PrinterProvider,PrinterTranslationCode,VERSION,discoverPrinters,getGlobalLogger,getPrinter,resolveEpsonError,resolveModelFromBluetoothName,resolvePrinterError,setGlobalLogger,usePrinter,usePrinterStatus});

package/dist/index.mjs

@@ -1,4 +1,4 @@
-var q={},z=t=>{q.logger=t},G=()=>q.logger;import{Platform as j}from"react-native";var _=(T=>(T.CONNECTION_FAILED="CONNECTION_FAILED",T.PRINT_FAILED="PRINT_FAILED",T.DISCOVERY_FAILED="DISCOVERY_FAILED",T.TIMEOUT="TIMEOUT",T.NATIVE_MODULE_MISSING="NATIVE_MODULE_MISSING",T.UNKNOWN="UNKNOWN",T))(_||{}),O=(c=>(c.ERR_PRINTER_RECONNECT_REQUIRED="printer.error.reconnect_required",c.ERR_PRINTER_OFFLINE="printer.error.offline",c.ERR_PRINTER_BUSY="printer.error.busy",c.ERR_PRINTER_COVER_OPEN="printer.error.cover_open",c.ERR_PRINTER_PAPER_EMPTY="printer.error.paper_empty",c.ERR_CONNECTION_TIMEOUT="printer.error.connection_timeout",c.ERR_UNKNOWN="printer.error.unknown",c))(O||{}),h=class t extends Error{constructor(r,n,i,o){super(i);this.code=r;this.translationCode=n;this.originalError=o;this.name="MunchiPrinterError",Object.setPrototypeOf(this,t.prototype)}};var se=t=>{if(!t||typeof t!="object")return"";let e=t.code;return typeof e=="string"?e:""},oe=t=>{if(t instanceof Error)return t.message;if(t&&typeof t=="object"){let e=t.message;if(typeof e=="string")return e}return String(t)},g=(t,e,r)=>t.includes(r)||e===r||e.includes(r),C=t=>{if(t instanceof h)return t;let e=oe(t),r=se(t),n=e.toUpperCase(),i=r.toUpperCase();return n.includes("ERROR CODE: 4")?new h("PRINT_FAILED","printer.error.cover_open","Printer cover is open",t):n.includes("ERROR CODE: 3")?new h("PRINT_FAILED","printer.error.busy","Printer is performing auto-recovery",t):n.includes("ERROR CODE: 7")?new h("PRINT_FAILED","printer.error.paper_empty","Printer paper is empty",t):g(n,i,"TARGET_IN_USE")||g(n,i,"BUSY")||g(n,i,"IN_USE")||g(n,i,"PRINT_BUSY")||g(n,i,"DISCOVERY_BUSY")?new h("TIMEOUT","printer.error.busy","Printer is busy",t):g(n,i,"TIMEOUT")||g(n,i,"ERR_TIMEOUT")||g(n,i,"PRINT_TIMEOUT")?new h("TIMEOUT","printer.error.connection_timeout","Operation timed out",t):g(n,i,"PRINTER_RECONNECT_REQUIRED")||n.includes("RECONNECT THE PRINTER")?new h("CONNECTION_FAILED","printer.error.reconnect_required",e,t):g(n,i,"PERMISSION_DENIED")||g(n,i,"LOCATION_DISABLED")||g(n,i,"BLUETOOTH_DISABLED")?new h("CONNECTION_FAILED","printer.error.offline",e,t):g(n,i,"DISCOVERY_ERROR")||n.includes("DISCOVERY")?new h("DISCOVERY_FAILED","printer.error.unknown",e,t):g(n,i,"PRINTER_OFFLINE")||g(n,i,"SESSION_ERROR")||g(n,i,"STATUS_ERROR")||g(n,i,"INIT_ERROR")||g(n,i,"PRINT_CANCELED")||g(n,i,"DISCONNECT")||g(n,i,"ERR_DISCONNECT")||n.includes("PRINTER NOT CONNECTED")||n.includes("OFFLINE")?new h("CONNECTION_FAILED","printer.error.offline",n.includes("OFFLINE")?e:"Printer disconnected",t):g(n,i,"CONNECT_ERROR")||n.includes("FAILED TO CONNECT")||g(n,i,"ERR_CONNECT")?new h("CONNECTION_FAILED","printer.error.offline","Failed to connect to printer",t):g(n,i,"PRINT_ERROR")||g(n,i,"PRINT_FAILURE")?new h("PRINT_FAILED","printer.error.unknown",e,t):new h("UNKNOWN","printer.error.unknown",e,t)};var Q=(a=>(a[a.ONLINE=0]="ONLINE",a[a.OFFLINE=1]="OFFLINE",a[a.POWER_OFF=2]="POWER_OFF",a[a.COVER_CLOSE=3]="COVER_CLOSE",a[a.COVER_OPEN=4]="COVER_OPEN",a[a.PAPER_OK=5]="PAPER_OK",a[a.PAPER_NEAR_END=6]="PAPER_NEAR_END",a[a.PAPER_EMPTY=7]="PAPER_EMPTY",a[a.DRAWER_HIGH=8]="DRAWER_HIGH",a[a.DRAWER_LOW=9]="DRAWER_LOW",a[a.BATTERY_ENOUGH=10]="BATTERY_ENOUGH",a[a.BATTERY_EMPTY=11]="BATTERY_EMPTY",a[a.AUTO_RECOVER_ERROR=20]="AUTO_RECOVER_ERROR",a[a.AUTO_RECOVER_OK=21]="AUTO_RECOVER_OK",a[a.UNRECOVERABLE_ERROR=22]="UNRECOVERABLE_ERROR",a))(Q||{}),ae=(n=>(n[n.RECONNECTING=0]="RECONNECTING",n[n.RECONNECT=1]="RECONNECT",n[n.DISCONNECT=2]="DISCONNECT",n))(ae||{}),ue=(u=>(u[u.SUCCESS=0]="SUCCESS",u[u.ERR_PARAM=1]="ERR_PARAM",u[u.ERR_CONNECT=2]="ERR_CONNECT",u[u.ERR_TIMEOUT=3]="ERR_TIMEOUT",u[u.ERR_MEMORY=4]="ERR_MEMORY",u[u.ERR_ILLEGAL=5]="ERR_ILLEGAL",u[u.ERR_PROCESSING=6]="ERR_PROCESSING",u[u.ERR_NOT_FOUND=7]="ERR_NOT_FOUND",u[u.ERR_IN_USE=8]="ERR_IN_USE",u[u.ERR_TYPE_INVALID=9]="ERR_TYPE_INVALID",u[u.ERR_DISCONNECT=10]="ERR_DISCONNECT",u[u.ERR_ALREADY_OPENED=11]="ERR_ALREADY_OPENED",u[u.ERR_ALREADY_USED=12]="ERR_ALREADY_USED",u[u.ERR_BOX_COUNT_OVER=13]="ERR_BOX_COUNT_OVER",u[u.ERR_BOX_CLIENT_OVER=14]="ERR_BOX_CLIENT_OVER",u[u.ERR_UNSUPPORTED=15]="ERR_UNSUPPORTED",u[u.ERR_DEVICE_BUSY=16]="ERR_DEVICE_BUSY",u[u.ERR_RECOVERY_FAILURE=17]="ERR_RECOVERY_FAILURE",u[u.ERR_FAILURE=255]="ERR_FAILURE",u))(ue||{}),ce=(d=>(d[d.SUCCESS=0]="SUCCESS",d[d.ERR_TIMEOUT=1]="ERR_TIMEOUT",d[d.ERR_NOT_FOUND=2]="ERR_NOT_FOUND",d[d.ERR_AUTORECOVER=3]="ERR_AUTORECOVER",d[d.ERR_COVER_OPEN=4]="ERR_COVER_OPEN",d[d.ERR_CUTTER=5]="ERR_CUTTER",d[d.ERR_MECHANICAL=6]="ERR_MECHANICAL",d[d.ERR_EMPTY=7]="ERR_EMPTY",d[d.ERR_UNRECOVERABLE=8]="ERR_UNRECOVERABLE",d[d.ERR_SYSTEM=9]="ERR_SYSTEM",d[d.ERR_PORT=10]="ERR_PORT",d[d.ERR_FAILURE=255]="ERR_FAILURE",d))(ce||{}),W=(l=>(l[l.EN=0]="EN",l[l.JA=1]="JA",l[l.ZH_CN=2]="ZH_CN",l[l.ZH_TW=3]="ZH_TW",l[l.KO=4]="KO",l[l.TH=5]="TH",l[l.VI=6]="VI",l[l.MULTI=7]="MULTI",l))(W||{}),le=(o=>(o[o.FONT_A=0]="FONT_A",o[o.FONT_B=1]="FONT_B",o[o.FONT_C=2]="FONT_C",o[o.FONT_D=3]="FONT_D",o[o.FONT_E=4]="FONT_E",o))(le||{}),k=(s=>(s[s.TM_M10=0]="TM_M10",s[s.TM_M30=1]="TM_M30",s[s.TM_P20=2]="TM_P20",s[s.TM_P60=3]="TM_P60",s[s.TM_P60II=4]="TM_P60II",s[s.TM_P80=5]="TM_P80",s[s.TM_T20=6]="TM_T20",s[s.TM_T60=7]="TM_T60",s[s.TM_T70=8]="TM_T70",s[s.TM_T81=9]="TM_T81",s[s.TM_T82=10]="TM_T82",s[s.TM_T83=11]="TM_T83",s[s.TM_T88=12]="TM_T88",s[s.TM_T90=13]="TM_T90",s[s.TM_T90KP=14]="TM_T90KP",s[s.TM_U220=15]="TM_U220",s[s.TM_U330=16]="TM_U330",s[s.TM_L90=17]="TM_L90",s[s.TM_H6000=18]="TM_H6000",s[s.TM_T83III=19]="TM_T83III",s[s.TM_T100=20]="TM_T100",s[s.TM_M30II=21]="TM_M30II",s[s.TM_M50=23]="TM_M50",s[s.TM_T88VII=24]="TM_T88VII",s[s.TM_L90LFC=25]="TM_L90LFC",s[s.TM_L100=26]="TM_L100",s[s.TM_P20II=27]="TM_P20II",s[s.TM_P80II=28]="TM_P80II",s[s.TM_M30III=29]="TM_M30III",s[s.TM_M50II=30]="TM_M50II",s[s.TM_M55=31]="TM_M55",s[s.TM_U220II=32]="TM_U220II",s))(k||{});var R=class t extends h{constructor(r,n,i,o,T){super(n,i,o,T);this.isHardwareError=r;this.name="PrinterError",Object.setPrototypeOf(this,t.prototype)}},A=t=>{if(t instanceof R)return t.isHardwareError;let e=String(t.message||t).toUpperCase();return e.includes("ERR_OFF_LINE")||e.includes("ERR_COVER_OPEN")||e.includes("ERR_PAPER_OUT")||e.includes("ERR_FAILURE")||e.includes("DISCONNECT")||e.includes("PRINT_TIMEOUT")||e.includes("ERROR CODE: 4")||e.includes("ERROR CODE: 7")||e.includes("ERROR CODE: 3")},K=t=>{if(t instanceof R)return t;let e=C(t),r=A(t);return new R(r,e.code,e.translationCode,e.message,e.originalError)};import{NativeEventEmitter as de,NativeModules as me}from"react-native";var m=me.MunchiEpsonModule,L=()=>m?new de(m):null,ge=t=>new Promise(e=>setTimeout(e,t)),Te=t=>{if(!t||typeof t!="object")return"";let e=t.code;return typeof e=="string"?e.toUpperCase():""},he=t=>{if(t instanceof Error)return t.message.toUpperCase();if(t&&typeof t=="object"){let e=t.message;if(typeof e=="string")return e.toUpperCase()}return String(t).toUpperCase()},f=(t,e,r)=>t.includes(r)||e===r||e.includes(r),P=async(t,e=3,r=500)=>{try{return await t()}catch(n){if(e<=1)throw n;let i=he(n),o=Te(n);if(f(i,o,"TARGET_IN_USE"))throw n;if(f(i,o,"BUSY")||f(i,o,"IN_USE")||f(i,o,"ERR_IN_USE")||f(i,o,"PRINT_BUSY")||f(i,o,"ERR_CONNECT")||f(i,o,"CONNECT_ERROR")||f(i,o,"ERR_TIMEOUT")||f(i,o,"PRINT_TIMEOUT"))return await ge(r),P(t,e-1,r);throw n}};var Ee=new Set([0,3,5,21]),y=class{constructor(e){this.config=e}statusSubscription=null;connectionSubscription=null;connectionCallbacks=new Set;emitStatus(e){for(let r of this.connectionCallbacks)r(e)}ensureStatusListener(){if(this.statusSubscription)return;let e=L();e&&(this.config.logger?.info?.("[EpsonPrinter] Starting status listener for queue management"),this.statusSubscription=e.addListener("onPrinterStatusChange",r=>{if(!this.config.getSessionId()||r.sessionId!==this.config.getSessionId())return;let n=`[EpsonPrinter] Received Status Event: ${r.eventType}`;this.config.logger?.info?.(n),this.config.onEvent({connectionStatus:null,statusEventType:r.eventType,isRecoveryEvent:Ee.has(r.eventType)})}))}ensureConnectionListener(){if(this.connectionSubscription)return;let e=L();e&&(this.connectionSubscription=e.addListener("onPrinterConnectionChange",r=>{if(!this.config.getSessionId()||r.sessionId!==this.config.getSessionId())return;let n="UNKNOWN";switch(r.status){case"RECONNECTING":n="RECONNECTING";break;case"RECONNECTED":n="CONNECTED";break;case"DISCONNECTED":n="DISCONNECTED";break;default:n="UNKNOWN"}this.config.onEvent({connectionStatus:n,statusEventType:null,isRecoveryEvent:!1}),this.emitStatus(n)}))}removeStatusListener(){this.statusSubscription&&(this.statusSubscription.remove(),this.statusSubscription=null)}onConnectionChange(e){return this.connectionCallbacks.add(e),e(this.config.getConnectionStatus()),this.ensureConnectionListener(),()=>{this.connectionCallbacks.delete(e),this.connectionCallbacks.size===0&&this.connectionSubscription&&(this.connectionSubscription.remove(),this.connectionSubscription=null)}}};var U=(n=>(n.Small="Small",n.Medium="Medium",n.Large="Large",n))(U||{});var Ce=(t,e=!1)=>{let r={Small:{normal:{width:1,height:1},item:{width:1,height:1}},Medium:{normal:{width:2,height:2},item:{width:2,height:2}},Large:{normal:{width:2,height:2},item:{width:3,height:3}}},n=e?"item":"normal";return r[t]?.[n]??r.Small.normal},X=t=>{if(typeof t!="object"||t===null)return null;let e=t;return{target:String(e.target||""),name:String(e.name||""),macAddress:e.macAddress?String(e.macAddress):void 0,ipAddress:e.ipAddress?String(e.ipAddress):void 0,bdAddress:e.bdAddress?String(e.bdAddress):void 0,type:"EPSON"}},$=t=>t.commands.map(e=>{switch(e.type){case"text":return{cmd:"addText",data:e.text,align:e.align,bold:e.bold,underline:e.underline,size:e.size};case"align":return{cmd:"addTextAlign",align:e.align};case"bold":return{cmd:"addTextStyle",bold:e.value};case"fontSize":{let r=Ce(e.size,e.isItemName);return{cmd:"addTextSize",width:r.width,height:r.height}}case"newline":return{cmd:"addFeedLine",line:e.lines||1};case"separator":return{cmd:"addText",data:`------------------
+var G={},q=t=>{G.logger=t},z=()=>G.logger;import{Platform as j}from"react-native";var _=(T=>(T.CONNECTION_FAILED="CONNECTION_FAILED",T.PRINT_FAILED="PRINT_FAILED",T.DISCOVERY_FAILED="DISCOVERY_FAILED",T.TIMEOUT="TIMEOUT",T.NATIVE_MODULE_MISSING="NATIVE_MODULE_MISSING",T.UNKNOWN="UNKNOWN",T))(_||{}),O=(c=>(c.ERR_PRINTER_RECONNECT_REQUIRED="printer.error.reconnect_required",c.ERR_PRINTER_OFFLINE="printer.error.offline",c.ERR_PRINTER_BUSY="printer.error.busy",c.ERR_PRINTER_COVER_OPEN="printer.error.cover_open",c.ERR_PRINTER_PAPER_EMPTY="printer.error.paper_empty",c.ERR_CONNECTION_TIMEOUT="printer.error.connection_timeout",c.ERR_UNKNOWN="printer.error.unknown",c))(O||{}),h=class t extends Error{constructor(r,n,i,o){super(i);this.code=r;this.translationCode=n;this.originalError=o;this.name="MunchiPrinterError",Object.setPrototypeOf(this,t.prototype)}};var se=t=>{if(!t||typeof t!="object")return"";let e=t.code;return typeof e=="string"?e:""},oe=t=>{if(t instanceof Error)return t.message;if(t&&typeof t=="object"){let e=t.message;if(typeof e=="string")return e}return String(t)},d=(t,e,r)=>t.includes(r)||e===r||e.includes(r),C=t=>{if(t instanceof h)return t;let e=oe(t),r=se(t),n=e.toUpperCase(),i=r.toUpperCase();return n.includes("ERROR CODE: 4")?new h("PRINT_FAILED","printer.error.cover_open","Printer cover is open",t):n.includes("ERROR CODE: 3")?new h("PRINT_FAILED","printer.error.busy","Printer is performing auto-recovery",t):n.includes("ERROR CODE: 7")?new h("PRINT_FAILED","printer.error.paper_empty","Printer paper is empty",t):d(n,i,"TARGET_IN_USE")||d(n,i,"BUSY")||d(n,i,"DEVICE_BUSY")||d(n,i,"IN_USE")||d(n,i,"ERR_IN_USE")||d(n,i,"PROCESSING")||d(n,i,"ERR_PROCESSING")||d(n,i,"PRINT_BUSY")||d(n,i,"PRINTING")||d(n,i,"DISCOVERY_BUSY")?new h("TIMEOUT","printer.error.busy","Printer is busy",t):d(n,i,"TIMEOUT")||d(n,i,"ERR_TIMEOUT")||d(n,i,"PRINT_TIMEOUT")?new h("TIMEOUT","printer.error.connection_timeout","Operation timed out",t):d(n,i,"PRINTER_RECONNECT_REQUIRED")||n.includes("RECONNECT THE PRINTER")?new h("CONNECTION_FAILED","printer.error.reconnect_required",e,t):d(n,i,"PERMISSION_DENIED")||d(n,i,"LOCATION_DISABLED")||d(n,i,"BLUETOOTH_DISABLED")?new h("CONNECTION_FAILED","printer.error.offline",e,t):d(n,i,"DISCOVERY_ERROR")||n.includes("DISCOVERY")?new h("DISCOVERY_FAILED","printer.error.unknown",e,t):d(n,i,"PRINTER_OFFLINE")||d(n,i,"SESSION_ERROR")||d(n,i,"STATUS_ERROR")||d(n,i,"INIT_ERROR")||d(n,i,"PRINT_CANCELED")||d(n,i,"DISCONNECT")||d(n,i,"ERR_DISCONNECT")||n.includes("PRINTER NOT CONNECTED")||n.includes("OFFLINE")?new h("CONNECTION_FAILED","printer.error.offline",n.includes("OFFLINE")?e:"Printer disconnected",t):d(n,i,"CONNECT_ERROR")||n.includes("FAILED TO CONNECT")||d(n,i,"ERR_CONNECT")?new h("CONNECTION_FAILED","printer.error.offline","Failed to connect to printer",t):d(n,i,"PRINT_ERROR")||d(n,i,"PRINT_FAILURE")?new h("PRINT_FAILED","printer.error.unknown",e,t):new h("UNKNOWN","printer.error.unknown",e,t)};var Q=(a=>(a[a.ONLINE=0]="ONLINE",a[a.OFFLINE=1]="OFFLINE",a[a.POWER_OFF=2]="POWER_OFF",a[a.COVER_CLOSE=3]="COVER_CLOSE",a[a.COVER_OPEN=4]="COVER_OPEN",a[a.PAPER_OK=5]="PAPER_OK",a[a.PAPER_NEAR_END=6]="PAPER_NEAR_END",a[a.PAPER_EMPTY=7]="PAPER_EMPTY",a[a.DRAWER_HIGH=8]="DRAWER_HIGH",a[a.DRAWER_LOW=9]="DRAWER_LOW",a[a.BATTERY_ENOUGH=10]="BATTERY_ENOUGH",a[a.BATTERY_EMPTY=11]="BATTERY_EMPTY",a[a.AUTO_RECOVER_ERROR=20]="AUTO_RECOVER_ERROR",a[a.AUTO_RECOVER_OK=21]="AUTO_RECOVER_OK",a[a.UNRECOVERABLE_ERROR=22]="UNRECOVERABLE_ERROR",a))(Q||{}),ae=(n=>(n[n.RECONNECTING=0]="RECONNECTING",n[n.RECONNECT=1]="RECONNECT",n[n.DISCONNECT=2]="DISCONNECT",n))(ae||{}),ue=(u=>(u[u.SUCCESS=0]="SUCCESS",u[u.ERR_PARAM=1]="ERR_PARAM",u[u.ERR_CONNECT=2]="ERR_CONNECT",u[u.ERR_TIMEOUT=3]="ERR_TIMEOUT",u[u.ERR_MEMORY=4]="ERR_MEMORY",u[u.ERR_ILLEGAL=5]="ERR_ILLEGAL",u[u.ERR_PROCESSING=6]="ERR_PROCESSING",u[u.ERR_NOT_FOUND=7]="ERR_NOT_FOUND",u[u.ERR_IN_USE=8]="ERR_IN_USE",u[u.ERR_TYPE_INVALID=9]="ERR_TYPE_INVALID",u[u.ERR_DISCONNECT=10]="ERR_DISCONNECT",u[u.ERR_ALREADY_OPENED=11]="ERR_ALREADY_OPENED",u[u.ERR_ALREADY_USED=12]="ERR_ALREADY_USED",u[u.ERR_BOX_COUNT_OVER=13]="ERR_BOX_COUNT_OVER",u[u.ERR_BOX_CLIENT_OVER=14]="ERR_BOX_CLIENT_OVER",u[u.ERR_UNSUPPORTED=15]="ERR_UNSUPPORTED",u[u.ERR_DEVICE_BUSY=16]="ERR_DEVICE_BUSY",u[u.ERR_RECOVERY_FAILURE=17]="ERR_RECOVERY_FAILURE",u[u.ERR_FAILURE=255]="ERR_FAILURE",u))(ue||{}),ce=(m=>(m[m.SUCCESS=0]="SUCCESS",m[m.ERR_TIMEOUT=1]="ERR_TIMEOUT",m[m.ERR_NOT_FOUND=2]="ERR_NOT_FOUND",m[m.ERR_AUTORECOVER=3]="ERR_AUTORECOVER",m[m.ERR_COVER_OPEN=4]="ERR_COVER_OPEN",m[m.ERR_CUTTER=5]="ERR_CUTTER",m[m.ERR_MECHANICAL=6]="ERR_MECHANICAL",m[m.ERR_EMPTY=7]="ERR_EMPTY",m[m.ERR_UNRECOVERABLE=8]="ERR_UNRECOVERABLE",m[m.ERR_SYSTEM=9]="ERR_SYSTEM",m[m.ERR_PORT=10]="ERR_PORT",m[m.ERR_FAILURE=255]="ERR_FAILURE",m))(ce||{}),W=(l=>(l[l.EN=0]="EN",l[l.JA=1]="JA",l[l.ZH_CN=2]="ZH_CN",l[l.ZH_TW=3]="ZH_TW",l[l.KO=4]="KO",l[l.TH=5]="TH",l[l.VI=6]="VI",l[l.MULTI=7]="MULTI",l))(W||{}),le=(o=>(o[o.FONT_A=0]="FONT_A",o[o.FONT_B=1]="FONT_B",o[o.FONT_C=2]="FONT_C",o[o.FONT_D=3]="FONT_D",o[o.FONT_E=4]="FONT_E",o))(le||{}),k=(s=>(s[s.TM_M10=0]="TM_M10",s[s.TM_M30=1]="TM_M30",s[s.TM_P20=2]="TM_P20",s[s.TM_P60=3]="TM_P60",s[s.TM_P60II=4]="TM_P60II",s[s.TM_P80=5]="TM_P80",s[s.TM_T20=6]="TM_T20",s[s.TM_T60=7]="TM_T60",s[s.TM_T70=8]="TM_T70",s[s.TM_T81=9]="TM_T81",s[s.TM_T82=10]="TM_T82",s[s.TM_T83=11]="TM_T83",s[s.TM_T88=12]="TM_T88",s[s.TM_T90=13]="TM_T90",s[s.TM_T90KP=14]="TM_T90KP",s[s.TM_U220=15]="TM_U220",s[s.TM_U330=16]="TM_U330",s[s.TM_L90=17]="TM_L90",s[s.TM_H6000=18]="TM_H6000",s[s.TM_T83III=19]="TM_T83III",s[s.TM_T100=20]="TM_T100",s[s.TM_M30II=21]="TM_M30II",s[s.TM_M50=23]="TM_M50",s[s.TM_T88VII=24]="TM_T88VII",s[s.TM_L90LFC=25]="TM_L90LFC",s[s.TM_L100=26]="TM_L100",s[s.TM_P20II=27]="TM_P20II",s[s.TM_P80II=28]="TM_P80II",s[s.TM_M30III=29]="TM_M30III",s[s.TM_M50II=30]="TM_M50II",s[s.TM_M55=31]="TM_M55",s[s.TM_U220II=32]="TM_U220II",s))(k||{});var f=class t extends h{constructor(r,n,i,o,T){super(n,i,o,T);this.isHardwareError=r;this.name="PrinterError",Object.setPrototypeOf(this,t.prototype)}},A=t=>{if(t instanceof f)return t.isHardwareError;let e=String(t.message||t).toUpperCase();return e.includes("ERR_OFF_LINE")||e.includes("ERR_COVER_OPEN")||e.includes("ERR_PAPER_OUT")||e.includes("ERR_FAILURE")||e.includes("DISCONNECT")||e.includes("PRINT_TIMEOUT")||e.includes("ERROR CODE: 4")||e.includes("ERROR CODE: 7")||e.includes("ERROR CODE: 3")},K=t=>{if(t instanceof f)return t;let e=C(t),r=A(t);return new f(r,e.code,e.translationCode,e.message,e.originalError)};import{NativeEventEmitter as de,NativeModules as me}from"react-native";var g=me.MunchiEpsonModule,L=()=>g?new de(g):null,ge=t=>new Promise(e=>setTimeout(e,t)),Te=t=>{if(!t||typeof t!="object")return"";let e=t.code;return typeof e=="string"?e.toUpperCase():""},he=t=>{if(t instanceof Error)return t.message.toUpperCase();if(t&&typeof t=="object"){let e=t.message;if(typeof e=="string")return e.toUpperCase()}return String(t).toUpperCase()},R=(t,e,r)=>t.includes(r)||e===r||e.includes(r),P=async(t,e=3,r=500)=>{try{return await t()}catch(n){if(e<=1)throw n;let i=he(n),o=Te(n);if(R(i,o,"TARGET_IN_USE"))throw n;if(R(i,o,"BUSY")||R(i,o,"IN_USE")||R(i,o,"ERR_IN_USE")||R(i,o,"PRINT_BUSY")||R(i,o,"ERR_CONNECT")||R(i,o,"CONNECT_ERROR")||R(i,o,"ERR_TIMEOUT")||R(i,o,"PRINT_TIMEOUT"))return await ge(r),P(t,e-1,r);throw n}};var Ee=new Set([0,3,5,21]),y=class{constructor(e){this.config=e}statusSubscription=null;connectionSubscription=null;connectionCallbacks=new Set;emitStatus(e){for(let r of this.connectionCallbacks)r(e)}ensureStatusListener(){if(this.statusSubscription)return;let e=L();e&&(this.config.logger?.info?.("[EpsonPrinter] Starting status listener for queue management"),this.statusSubscription=e.addListener("onPrinterStatusChange",r=>{if(!this.config.getSessionId()||r.sessionId!==this.config.getSessionId())return;let n=`[EpsonPrinter] Received Status Event: ${r.eventType}`;this.config.logger?.info?.(n),this.config.onEvent({connectionStatus:null,statusEventType:r.eventType,isRecoveryEvent:Ee.has(r.eventType)})}))}ensureConnectionListener(){if(this.connectionSubscription)return;let e=L();e&&(this.connectionSubscription=e.addListener("onPrinterConnectionChange",r=>{if(!this.config.getSessionId()||r.sessionId!==this.config.getSessionId())return;let n="UNKNOWN";switch(r.status){case"RECONNECTING":n="RECONNECTING";break;case"RECONNECTED":n="CONNECTED";break;case"DISCONNECTED":n="DISCONNECTED";break;default:n="UNKNOWN"}this.config.onEvent({connectionStatus:n,statusEventType:null,isRecoveryEvent:!1}),this.emitStatus(n)}))}removeStatusListener(){this.statusSubscription&&(this.statusSubscription.remove(),this.statusSubscription=null)}onConnectionChange(e){return this.connectionCallbacks.add(e),e(this.config.getConnectionStatus()),this.ensureConnectionListener(),()=>{this.connectionCallbacks.delete(e),this.connectionCallbacks.size===0&&this.connectionSubscription&&(this.connectionSubscription.remove(),this.connectionSubscription=null)}}};var U=(n=>(n.Small="Small",n.Medium="Medium",n.Large="Large",n))(U||{});var Ce=(t,e=!1)=>{let r={Small:{normal:{width:1,height:1},item:{width:1,height:1}},Medium:{normal:{width:2,height:2},item:{width:2,height:2}},Large:{normal:{width:2,height:2},item:{width:3,height:3}}},n=e?"item":"normal";return r[t]?.[n]??r.Small.normal},X=t=>{if(typeof t!="object"||t===null)return null;let e=t;return{target:String(e.target||""),name:String(e.name||""),macAddress:e.macAddress?String(e.macAddress):void 0,ipAddress:e.ipAddress?String(e.ipAddress):void 0,bdAddress:e.bdAddress?String(e.bdAddress):void 0,type:"EPSON"}},$=t=>t.commands.map(e=>{switch(e.type){case"text":return{cmd:"addText",data:e.text,align:e.align,bold:e.bold,underline:e.underline,size:e.size};case"align":return{cmd:"addTextAlign",align:e.align};case"bold":return{cmd:"addTextStyle",bold:e.value};case"fontSize":{let r=Ce(e.size,e.isItemName);return{cmd:"addTextSize",width:r.width,height:r.height}}case"newline":return{cmd:"addFeedLine",line:e.lines||1};case"separator":return{cmd:"addText",data:`------------------
 `};case"textLang":return{cmd:"addTextLang",lang:e.lang};case"textFont":return{cmd:"addTextFont",font:e.font};case"image":return{cmd:"addImage",data:e.base64,width:e.width};case"cut":return{cmd:"addCut"};case"drawer":return{cmd:"addPulse"};case"barcode":return{cmd:"addBarcode",data:e.data,type:e.system,width:e.width,height:e.height};case"qr":return{cmd:"addSymbol",data:e.data,type:"QRCODE_MODEL_2",level:e.errorCorrection||"M",width:e.size||3};case"feed":return{cmd:"addFeedLine",line:e.lines};default:return null}}).filter(e=>e!==null);var J=t=>{let e=[];if(t.settings?.fontSize){let r="Medium";t.settings.fontSize==="Small"&&(r="Small"),t.settings.fontSize==="Large"&&(r="Large"),e.push({type:"fontSize",size:r})}t.settings?.fontStyle==="Bold"&&e.push({type:"bold",value:!0}),e.push({type:"align",align:"center"}),t.tbl&&e.push({type:"text",text:`Table: ${t.tbl}
 `,bold:!0,size:"double-height"}),e.push({type:"text",text:`Order: ${t.id}
 `,bold:!0}),e.push({type:"text",text:`${t.ts}
@@ -8,4 +8,4 @@ var q={},z=t=>{q.logger=t},G=()=>q.logger;import{Platform as j}from"react-native
 `,align:"center",bold:!0})}else i==="B"?e.push({type:"text",text:c+`
 `,bold:!0}):i==="R"?e.push({type:"text",text:c+`
 `,bold:!0}):e.push({type:"text",text:c+`
-`,align:"left"})}return e.push({type:"feed",lines:3}),e.push({type:"cut"}),{commands:e}};var v=class{constructor(e){this.logger=e}queue=Promise.resolve();isQueuePaused=!1;resumeQueueResolver=null;isPaused(){return this.isQueuePaused}pause(){this.isQueuePaused=!0}resume(){this.isQueuePaused&&(this.isQueuePaused=!1,this.resumeQueueResolver&&(this.resumeQueueResolver(),this.resumeQueueResolver=null))}async waitUntilResumed(){if(this.isQueuePaused)return new Promise(e=>{let r=this.resumeQueueResolver;this.resumeQueueResolver=()=>{r&&r(),e()}})}enqueue(e){return new Promise((r,n)=>{let i=async()=>{this.isQueuePaused&&(this.logger?.info?.("[EpsonPrinter] Queue is PAUSED. Waiting for resume..."),await this.waitUntilResumed(),this.logger?.info?.("[EpsonPrinter] Queue RESUMED."));try{let o=await e();r(o)}catch(o){n(o)}};this.queue=this.queue.then(i,i)})}enqueueBackground(e){this.queue=this.queue.then(e,e)}};var D=class{constructor(e){this.config=e}recoveryTimer=null;start(){this.recoveryTimer||(this.config.logger?.info?.("[EpsonPrinter] Starting recovery polling..."),this.recoveryTimer=setInterval(async()=>{try{let e=await this.config.getStatus();if(e.online&&!e.coverOpen&&e.errorStatus==="NONE")this.config.logger?.info?.("[EpsonPrinter] Poller detected healthy status. Requesting queue resume."),this.config.onRecovered();else{let n=`[EpsonPrinter] Polling... Status: Online=${e.online}, Cover=${e.coverOpen}, Err=${e.errorStatus}`;this.config.logger?.info?.(n)}}catch(e){this.config.logger?.error("[EpsonPrinter] Recovery poll failed",e)}},2e3))}stop(){this.recoveryTimer&&(this.config.logger?.info?.("[EpsonPrinter] Stopping recovery polling."),clearInterval(this.recoveryTimer),this.recoveryTimer=null)}};var M=class{constructor(e){this.logger=e}sessionId=null;sessionInitPromise=null;getSessionId(){return this.sessionId}async ensureSession(){if(!m)throw new Error("Native module not found");return this.sessionId?this.sessionId:this.sessionInitPromise?this.sessionInitPromise:(this.sessionInitPromise=m.initSession().then(e=>(this.sessionId=e,e)).finally(()=>{this.sessionInitPromise=null}),this.sessionInitPromise)}async disposeSession(){if(!m||!this.sessionId){this.sessionId=null;return}let e=this.sessionId;this.sessionId=null;try{await m.disposeSession(e)}catch(r){this.logger?.error("[EpsonPrinter] Dispose session failed",r)}}};var w=class{constructor(e){this.config=e}statusCallbacks=new Set;latestHardwareStatus=null;statusRefreshPromise=null;statusRefreshTimer=null;subscribe(e){return this.statusCallbacks.add(e),this.latestHardwareStatus?e(this.latestHardwareStatus):this.config.getConnectionStatus()!=="CONNECTED"?e(this.config.defaultStatus):this.refreshNow(),()=>{this.statusCallbacks.delete(e)}}handleStatusEvent(){this.scheduleRefresh()}handleConnected(){this.scheduleRefresh(0)}handleDisconnected(){this.clearRefreshTimer(),this.setHardwareStatus(this.config.defaultStatus)}clear(){this.clearRefreshTimer()}async refreshNow(){if(this.config.getConnectionStatus()!=="CONNECTED"){this.setHardwareStatus(this.config.defaultStatus);return}if(this.statusRefreshPromise){await this.statusRefreshPromise;return}this.statusRefreshPromise=(async()=>{try{let e=await this.config.getStatus();this.setHardwareStatus(e)}catch(e){this.config.logger?.error("[EpsonPrinter] Status refresh failed",e),this.latestHardwareStatus||this.setHardwareStatus(this.config.defaultStatus)}})().finally(()=>{this.statusRefreshPromise=null}),await this.statusRefreshPromise}emitHardwareStatus(e){for(let r of this.statusCallbacks)r(e)}setHardwareStatus(e){this.latestHardwareStatus=e,this.emitHardwareStatus(e)}clearRefreshTimer(){this.statusRefreshTimer&&(clearTimeout(this.statusRefreshTimer),this.statusRefreshTimer=null)}scheduleRefresh(e=150){this.config.getConnectionStatus()==="CONNECTED"&&(this.statusRefreshTimer||(this.statusRefreshTimer=setTimeout(()=>{this.statusRefreshTimer=null,this.refreshNow()},e)))}};var F={online:!1,coverOpen:!1,paperEmpty:!1,paper:"EMPTY",errorStatus:"NONE",drawerOpen:!1},fe=5e3,b=class{disconnectTimer=null;connectionStatus="DISCONNECTED";isConnecting=!1;target=null;defaultTarget;model;lang;logger;sessionManager;queueController;recoveryController;statusController;eventRouter;constructor(e){this.logger=e.logger,this.defaultTarget=e.target??null,this.model=e.model,this.lang=e.lang??0,this.sessionManager=new M(this.logger),this.queueController=new v(this.logger),this.recoveryController=new D({logger:this.logger,getStatus:()=>this.getStatus(),onRecovered:()=>this.resumeQueue()}),this.statusController=new w({logger:this.logger,defaultStatus:F,getConnectionStatus:()=>this.connectionStatus,getStatus:()=>this.getStatus()}),this.eventRouter=new y({logger:this.logger,getSessionId:()=>this.sessionManager.getSessionId(),getConnectionStatus:()=>this.connectionStatus,onEvent:r=>{r.statusEventType!==null&&(this.statusController.handleStatusEvent(),r.isRecoveryEvent&&this.queueController.isPaused()&&(this.logger?.info?.("[EpsonPrinter] Printer recovered (Event). Resuming queue..."),this.resumeQueue())),r.connectionStatus!==null&&(r.connectionStatus==="CONNECTED"&&(this.connectionStatus="CONNECTED"),r.connectionStatus==="CONNECTED"&&this.statusController.handleConnected(),r.connectionStatus==="DISCONNECTED"&&(this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected()))}})}resumeQueue(){if(!this.queueController.isPaused())return;this.logger?.info?.("[EpsonPrinter] Resuming queue..."),this.recoveryController.stop(),this.queueController.resume()}isIosConnectionRecoveryCandidate(e){return j.OS!=="ios"?!1:e.code==="CONNECTION_FAILED"||e.code==="TIMEOUT"&&e.translationCode==="printer.error.connection_timeout"||e.translationCode==="printer.error.offline"}hasTargetInUseToken(e){if(!e||typeof e!="object")return!1;let r=String(e.code??"").toUpperCase(),n=String(e.message??"").toUpperCase();return r.includes("TARGET_IN_USE")||n.includes("TARGET_IN_USE")}isIosConnectBusyRecoveryCandidate(e){return j.OS!=="ios"||e.translationCode!=="printer.error.busy"?!1:!this.hasTargetInUseToken(e.originalError)}async recoverIosSessionForPrint(){if(!m)throw new Error("Native module not found");let e=this.target??this.defaultTarget;if(!e)throw new Error("Printer target is required");let r=this.sessionManager.getSessionId();if(r)try{await m.disconnect(r)}catch(i){this.logger?.error("[EpsonPrinter] iOS recovery disconnect failed (best-effort)",i)}await this.sessionManager.disposeSession(),this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED");let n=await this.sessionManager.ensureSession();return await P(()=>m.connect(n,e,fe,this.model,this.lang)),this.target=e,this.connectionStatus="CONNECTED",this.eventRouter.emitStatus("CONNECTED"),this.eventRouter.ensureStatusListener(),this.eventRouter.ensureConnectionListener(),this.statusController.handleConnected(),n}async recoverIosSessionForConnect(e,r){if(!m)throw new Error("Native module not found");let n=this.sessionManager.getSessionId();if(n)try{await m.disconnect(n)}catch(o){this.logger?.error("[EpsonPrinter] iOS connect recovery disconnect failed (best-effort)",o)}await this.sessionManager.disposeSession(),this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED");let i=await this.sessionManager.ensureSession();await P(()=>m.connect(i,e,r,this.model,this.lang)),this.target=e,this.connectionStatus="CONNECTED",this.eventRouter.emitStatus("CONNECTED"),this.eventRouter.ensureStatusListener(),this.eventRouter.ensureConnectionListener(),this.statusController.handleConnected()}async connect(e,r=5e3){let n=e??this.defaultTarget;if(!n){let i=new Error("Printer target is required");throw this.logger?.error("[EpsonPrinter] Connect failed: missing target",i),i}return this.disconnectTimer&&(clearTimeout(this.disconnectTimer),this.disconnectTimer=null),this.queueController.enqueue(async()=>{if(!m){this.logger?.error("[EpsonPrinter] Native module not found");return}if(this.connectionStatus==="CONNECTED"&&this.target===n)return;let i=await this.sessionManager.ensureSession();this.isConnecting=!0,this.connectionStatus="CONNECTING",this.eventRouter.emitStatus("CONNECTING");let o=!1;try{await P(()=>m.connect(i,n,r,this.model,this.lang)),this.target=n,this.connectionStatus="CONNECTED",this.eventRouter.emitStatus("CONNECTED"),this.isConnecting=!1,this.eventRouter.ensureStatusListener(),this.eventRouter.ensureConnectionListener(),this.statusController.handleConnected()}catch(T){let c=C(T);if(!o&&this.isIosConnectBusyRecoveryCandidate(c)){o=!0,this.logger?.error("[EpsonPrinter] iOS busy connect suspected stale session. Recovering connection and retrying connect once...",c);try{await this.recoverIosSessionForConnect(n,r),this.logger?.info?.("[EpsonPrinter] iOS connect recovery succeeded."),this.isConnecting=!1;return}catch(l){let p=C(l);throw this.logger?.error("[EpsonPrinter] iOS connect recovery failed",p),this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED"),this.isConnecting=!1,p}}throw this.logger?.error(`[EpsonPrinter] Connect failed for ${n}`,c),this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED"),this.isConnecting=!1,c}})}async print(e){if(!m)return;this.disconnectTimer&&(clearTimeout(this.disconnectTimer),this.disconnectTimer=null);let r=0,n=!1;return this.queueController.enqueue(async()=>{let i=await this.sessionManager.ensureSession(),o=$(e);for(;;){r++,this.logger?.info?.(`[EpsonPrinter] Print attempt ${r}`);try{await P(()=>m.print(i,o));break}catch(T){let c=K(T);if(!n&&this.isIosConnectionRecoveryCandidate(c)){n=!0,this.logger?.error("[EpsonPrinter] iOS stale session suspected. Recovering connection and retrying print once...",c);try{i=await this.recoverIosSessionForPrint(),this.logger?.info?.("[EpsonPrinter] iOS session recovery succeeded. Retrying print...");continue}catch(l){let p=C(l);throw this.logger?.error("[EpsonPrinter] iOS session recovery failed",p),p}}if(c.isHardwareError){this.queueController.pause(),this.logger?.error(`[EpsonPrinter] Hardware error on attempt ${r}. Waiting for recovery before retry...`,c),this.recoveryController.start(),await this.queueController.waitUntilResumed(),this.logger?.info?.("[EpsonPrinter] Recovery detected. Sending cut to flush partial print before retry...");try{await m.print(i,[{cmd:"addCut"}])}catch{}this.logger?.info?.("[EpsonPrinter] Retrying print job...")}else throw this.logger?.error(`[EpsonPrinter] Print failed (non-recoverable) on attempt ${r}`,c),c}}}).finally(()=>{this.disconnectTimer&&clearTimeout(this.disconnectTimer),this.disconnectTimer=setTimeout(()=>{this.performDisconnect()},5e3)})}performDisconnect(){this.queueController.enqueueBackground(async()=>{if(!this.disconnectTimer)return;let e=this.sessionManager.getSessionId();if(m&&this.connectionStatus==="CONNECTED"&&e)try{await m.disconnect(e),this.connectionStatus="DISCONNECTED",this.target=null,this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED"),await this.sessionManager.disposeSession()}catch(r){this.logger?.error("[EpsonPrinter] Auto-Disconnect failed",r)}this.disconnectTimer=null})}async printEmbedded(e){try{let r=J(e);return await this.print(r)}catch(r){let n=C(r);throw String(r).includes("MunchiPrinterError")||this.logger?.error("[EpsonPrinter] Embedded print failed",n),n}}async disconnect(){return this.disconnectTimer&&(clearTimeout(this.disconnectTimer),this.disconnectTimer=null),this.queueController.enqueue(async()=>{if(!m)return;let e=this.sessionManager.getSessionId();if(e)try{await m.disconnect(e),this.connectionStatus="DISCONNECTED",this.target=null,this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED"),this.eventRouter.removeStatusListener(),this.recoveryController.stop()}catch(r){this.logger?.error("[EpsonPrinter] Disconnect failed",r)}finally{this.statusController.clear(),await this.sessionManager.disposeSession()}})}async getStatus(){if(!m)return F;let e=this.sessionManager.getSessionId();if(!e)return F;try{return await m.getStatus(e)}catch(r){throw this.logger?.error("[EpsonPrinter] GetStatus failed",r),C(r)}}async openDrawer(){let e={commands:[{type:"drawer"}]};return this.print(e)}onConnectionChange(e){return this.eventRouter.onConnectionChange(e)}onStatusChange(e){return this.statusController.subscribe(e)}};import{NativeModules as Re}from"react-native";var Z=Re.MunchiEpsonModule,pe={bluetooth:["BT:"],tcp:["TCP:","TCPS:"],usb:["USB:"]},Ne=t=>t.includes("[local_"),Pe=(t,e)=>e?pe[e].some(n=>t.startsWith(n)):!0,Ie=async t=>{if(!Z)return console.warn("[EpsonDiscovery] Native module not found"),[];try{return(await Z.discover({timeout:t.timeout})).map(X).filter(r=>!r||Ne(r.target)?!1:Pe(r.target,t.connectionType))}catch(e){let r=C(e);throw console.error("[EpsonDiscovery] Discovery failed",r),r}};var Se=[[/^TM-m10/i,0],[/^TM-m30III/i,29],[/^TM-m30II/i,21],[/^TM-m30/i,1],[/^TM-m50II/i,30],[/^TM-m50/i,23],[/^TM-m55/i,31],[/^TM-P20II/i,27],[/^TM-P20/i,2],[/^TM-P60II/i,4],[/^TM-P60/i,3],[/^TM-P80II/i,28],[/^TM-P80/i,5],[/^TM-T20/i,6],[/^TM-T60/i,7],[/^TM-T70/i,8],[/^TM-T81/i,9],[/^TM-T82/i,10],[/^TM-T83III/i,19],[/^TM-T83/i,11],[/^TM-T88VII/i,24],[/^TM-T88/i,12],[/^TM-T90KP/i,14],[/^TM-T90/i,13],[/^TM-T100/i,20],[/^TM-U220II/i,32],[/^TM-U220/i,15],[/^TM-U330/i,16],[/^TM-L90LFC/i,25],[/^TM-L90/i,17],[/^TM-L100/i,26],[/^TM-H6000/i,18]],_e=t=>{for(let[e,r]of Se)if(e.test(t))return r;return null};var Oe=t=>{let e=C(t),r=e.message.toUpperCase(),n=t instanceof R?t.isHardwareError:A(t),i=e.translationCode==="printer.error.busy"||r.includes("BUSY")||r.includes("IN_USE")||r.includes("PRINT_BUSY"),o=e.code==="TIMEOUT"||e.translationCode==="printer.error.connection_timeout"||r.includes("TIMEOUT"),T=e.code==="CONNECTION_FAILED"||e.translationCode==="printer.error.offline",c=e.code==="DISCOVERY_FAILED",l="UNKNOWN";return n?l="HARDWARE":i?l="BUSY":o?l="TIMEOUT":T?l="CONNECTION":c?l="DISCOVERY":e.code==="PRINT_FAILED"&&(l="PRINT"),{code:e.code,translationCode:e.translationCode,message:e.message,category:l,isHardwareError:n,retryable:i||o,shouldPauseQueue:n,raw:t}},Ot=t=>Oe(t);import ye from"react";import{createContext as ve,useContext as De,useEffect as Me,useMemo as ee,useState as we}from"react";var te=ve(void 0),bt=({config:t,logger:e,children:r})=>{let[n,i]=we();Me(()=>{e&&z(e)},[e]);let o=ee(()=>{let c={...t,logger:e??t.logger};return ne(c)},[t.lang,t.model,t.target,e]),T=ee(()=>({printer:o,config:t,isReady:!0,error:n}),[o,t,n]);return ye.createElement(te.Provider,{value:T},r)},re=()=>{let t=De(te);if(!t)throw new Error("usePrinter must be used within a PrinterProvider");return t};import{useCallback as B,useEffect as x,useRef as ie,useState as Y}from"react";function Ut(t={}){let{enabled:e=!0}=t,{printer:r,config:n}=re(),[i,o]=Y("DISCONNECTED"),[T,c]=Y(null),[l,p]=Y(null),H=ie("DISCONNECTED"),V=ie(null),d=l!==null,N=B(E=>{V.current=E,p(E)},[]),I=B(E=>{if(E instanceof Error&&E.message){N(E.message);return}if(typeof E=="string"&&E.length>0){N(E);return}N("Unknown printer error")},[N]),a=B(()=>{V.current!==null&&N(null)},[N]);return x(()=>r.onConnectionChange(S=>{H.current=S,o(S),S==="CONNECTED"&&a()}),[a,r]),x(()=>e?r.onStatusChange(S=>{c(S),a()}):void 0,[a,e,r]),x(()=>{e&&i==="CONNECTED"&&r.getStatus().then(E=>{c(E),a()}).catch(I)},[I,a,i,e,r]),x(()=>{let E=H.current;if(e){E==="DISCONNECTED"&&i==="DISCONNECTED"&&r.connect(n.target,5e3).then(a).catch(I);return}(i==="CONNECTED"||i==="CONNECTING")&&r.disconnect().then(a).catch(I)},[I,a,n.target,i,e,r]),{connectionStatus:i,hardwareStatus:T,isError:d,errorMessage:l}}var be="1.0.7";function ne(t){return new b({...t,logger:t.logger??G()})}export{ce as Epos2CallbackCode,ae as Epos2ConnectionEvent,ue as Epos2ErrorStatus,le as Epos2Font,W as Epos2Lang,Q as Epos2StatusEvent,k as EpsonModel,U as FontSize,h as MunchiPrinterError,R as PrinterError,_ as PrinterErrorCode,bt as PrinterProvider,O as PrinterTranslationCode,be as VERSION,Ie as discoverPrinters,G as getGlobalLogger,ne as getPrinter,Ot as resolveEpsonError,_e as resolveModelFromBluetoothName,Oe as resolvePrinterError,z as setGlobalLogger,re as usePrinter,Ut as usePrinterStatus};
+`,align:"left"})}return e.push({type:"feed",lines:3}),e.push({type:"cut"}),{commands:e}};var v=class{constructor(e){this.logger=e}queue=Promise.resolve();isQueuePaused=!1;resumeQueueResolver=null;isPaused(){return this.isQueuePaused}pause(){this.isQueuePaused=!0}resume(){this.isQueuePaused&&(this.isQueuePaused=!1,this.resumeQueueResolver&&(this.resumeQueueResolver(),this.resumeQueueResolver=null))}async waitUntilResumed(){if(this.isQueuePaused)return new Promise(e=>{let r=this.resumeQueueResolver;this.resumeQueueResolver=()=>{r&&r(),e()}})}enqueue(e){return new Promise((r,n)=>{let i=async()=>{this.isQueuePaused&&(this.logger?.info?.("[EpsonPrinter] Queue is PAUSED. Waiting for resume..."),await this.waitUntilResumed(),this.logger?.info?.("[EpsonPrinter] Queue RESUMED."));try{let o=await e();r(o)}catch(o){n(o)}};this.queue=this.queue.then(i,i)})}enqueueBackground(e){this.queue=this.queue.then(e,e)}};var D=class{constructor(e){this.config=e}recoveryTimer=null;start(){this.recoveryTimer||(this.config.logger?.info?.("[EpsonPrinter] Starting recovery polling..."),this.recoveryTimer=setInterval(async()=>{try{let e=await this.config.getStatus();if(e.online&&!e.coverOpen&&e.errorStatus==="NONE")this.config.logger?.info?.("[EpsonPrinter] Poller detected healthy status. Requesting queue resume."),this.config.onRecovered();else{let n=`[EpsonPrinter] Polling... Status: Online=${e.online}, Cover=${e.coverOpen}, Err=${e.errorStatus}`;this.config.logger?.info?.(n)}}catch(e){this.config.logger?.error("[EpsonPrinter] Recovery poll failed",e)}},2e3))}stop(){this.recoveryTimer&&(this.config.logger?.info?.("[EpsonPrinter] Stopping recovery polling."),clearInterval(this.recoveryTimer),this.recoveryTimer=null)}};var M=class{constructor(e){this.logger=e}sessionId=null;sessionInitPromise=null;getSessionId(){return this.sessionId}async ensureSession(){if(!g)throw new Error("Native module not found");return this.sessionId?this.sessionId:this.sessionInitPromise?this.sessionInitPromise:(this.sessionInitPromise=g.initSession().then(e=>(this.sessionId=e,e)).finally(()=>{this.sessionInitPromise=null}),this.sessionInitPromise)}async disposeSession(){if(!g||!this.sessionId){this.sessionId=null;return}let e=this.sessionId;this.sessionId=null;try{await g.disposeSession(e)}catch(r){this.logger?.error("[EpsonPrinter] Dispose session failed",r)}}};var w=class{constructor(e){this.config=e}statusCallbacks=new Set;latestHardwareStatus=null;statusRefreshPromise=null;statusRefreshTimer=null;subscribe(e){return this.statusCallbacks.add(e),this.latestHardwareStatus?e(this.latestHardwareStatus):this.config.getConnectionStatus()!=="CONNECTED"?e(this.config.defaultStatus):this.refreshNow(),()=>{this.statusCallbacks.delete(e)}}handleStatusEvent(){this.scheduleRefresh()}handleConnected(){this.scheduleRefresh(0)}handleDisconnected(){this.clearRefreshTimer(),this.setHardwareStatus(this.config.defaultStatus)}clear(){this.clearRefreshTimer()}async refreshNow(){if(this.config.getConnectionStatus()!=="CONNECTED"){this.setHardwareStatus(this.config.defaultStatus);return}if(this.statusRefreshPromise){await this.statusRefreshPromise;return}this.statusRefreshPromise=(async()=>{try{let e=await this.config.getStatus();this.setHardwareStatus(e)}catch(e){this.config.logger?.error("[EpsonPrinter] Status refresh failed",e),this.latestHardwareStatus||this.setHardwareStatus(this.config.defaultStatus)}})().finally(()=>{this.statusRefreshPromise=null}),await this.statusRefreshPromise}emitHardwareStatus(e){for(let r of this.statusCallbacks)r(e)}setHardwareStatus(e){this.latestHardwareStatus=e,this.emitHardwareStatus(e)}clearRefreshTimer(){this.statusRefreshTimer&&(clearTimeout(this.statusRefreshTimer),this.statusRefreshTimer=null)}scheduleRefresh(e=150){this.config.getConnectionStatus()==="CONNECTED"&&(this.statusRefreshTimer||(this.statusRefreshTimer=setTimeout(()=>{this.statusRefreshTimer=null,this.refreshNow()},e)))}};var F={online:!1,coverOpen:!1,paperEmpty:!1,paper:"EMPTY",errorStatus:"NONE",drawerOpen:!1},Re=5e3,b=class{disconnectTimer=null;connectionStatus="DISCONNECTED";isConnecting=!1;target=null;defaultTarget;model;lang;logger;sessionManager;queueController;recoveryController;statusController;eventRouter;constructor(e){this.logger=e.logger,this.defaultTarget=e.target??null,this.model=e.model,this.lang=e.lang??0,this.sessionManager=new M(this.logger),this.queueController=new v(this.logger),this.recoveryController=new D({logger:this.logger,getStatus:()=>this.getStatus(),onRecovered:()=>this.resumeQueue()}),this.statusController=new w({logger:this.logger,defaultStatus:F,getConnectionStatus:()=>this.connectionStatus,getStatus:()=>this.getStatus()}),this.eventRouter=new y({logger:this.logger,getSessionId:()=>this.sessionManager.getSessionId(),getConnectionStatus:()=>this.connectionStatus,onEvent:r=>{r.statusEventType!==null&&(this.statusController.handleStatusEvent(),r.isRecoveryEvent&&this.queueController.isPaused()&&(this.logger?.info?.("[EpsonPrinter] Printer recovered (Event). Resuming queue..."),this.resumeQueue())),r.connectionStatus!==null&&(r.connectionStatus==="CONNECTED"&&(this.connectionStatus="CONNECTED"),r.connectionStatus==="CONNECTED"&&this.statusController.handleConnected(),r.connectionStatus==="DISCONNECTED"&&(this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected()))}})}resumeQueue(){if(!this.queueController.isPaused())return;this.logger?.info?.("[EpsonPrinter] Resuming queue..."),this.recoveryController.stop(),this.queueController.resume()}isIosConnectionRecoveryCandidate(e){return j.OS!=="ios"?!1:e.code==="CONNECTION_FAILED"||e.code==="TIMEOUT"&&e.translationCode==="printer.error.connection_timeout"||e.translationCode==="printer.error.offline"}hasTargetInUseToken(e){if(!e||typeof e!="object")return!1;let r=String(e.code??"").toUpperCase(),n=String(e.message??"").toUpperCase();return r.includes("TARGET_IN_USE")||n.includes("TARGET_IN_USE")}isIosConnectBusyRecoveryCandidate(e){return j.OS!=="ios"||e.translationCode!=="printer.error.busy"?!1:!this.hasTargetInUseToken(e.originalError)}async recoverIosSessionForPrint(){if(!g)throw new Error("Native module not found");let e=this.target??this.defaultTarget;if(!e)throw new Error("Printer target is required");let r=this.sessionManager.getSessionId();if(r)try{await g.disconnect(r)}catch(i){this.logger?.error("[EpsonPrinter] iOS recovery disconnect failed (best-effort)",i)}await this.sessionManager.disposeSession(),this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED");let n=await this.sessionManager.ensureSession();return await P(()=>g.connect(n,e,Re,this.model,this.lang)),this.target=e,this.connectionStatus="CONNECTED",this.eventRouter.emitStatus("CONNECTED"),this.eventRouter.ensureStatusListener(),this.eventRouter.ensureConnectionListener(),this.statusController.handleConnected(),n}async recoverIosSessionForConnect(e,r){if(!g)throw new Error("Native module not found");let n=this.sessionManager.getSessionId();if(n)try{await g.disconnect(n)}catch(o){this.logger?.error("[EpsonPrinter] iOS connect recovery disconnect failed (best-effort)",o)}await this.sessionManager.disposeSession(),this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED");let i=await this.sessionManager.ensureSession();await P(()=>g.connect(i,e,r,this.model,this.lang)),this.target=e,this.connectionStatus="CONNECTED",this.eventRouter.emitStatus("CONNECTED"),this.eventRouter.ensureStatusListener(),this.eventRouter.ensureConnectionListener(),this.statusController.handleConnected()}async connect(e,r=5e3){let n=e??this.defaultTarget;if(!n){let i=new Error("Printer target is required");throw this.logger?.error("[EpsonPrinter] Connect failed: missing target",i),i}return this.disconnectTimer&&(clearTimeout(this.disconnectTimer),this.disconnectTimer=null),this.queueController.enqueue(async()=>{if(!g){this.logger?.error("[EpsonPrinter] Native module not found");return}if(this.connectionStatus==="CONNECTED"&&this.target===n)return;let i=await this.sessionManager.ensureSession();this.isConnecting=!0,this.connectionStatus="CONNECTING",this.eventRouter.emitStatus("CONNECTING");let o=!1;try{await P(()=>g.connect(i,n,r,this.model,this.lang)),this.target=n,this.connectionStatus="CONNECTED",this.eventRouter.emitStatus("CONNECTED"),this.isConnecting=!1,this.eventRouter.ensureStatusListener(),this.eventRouter.ensureConnectionListener(),this.statusController.handleConnected()}catch(T){let c=C(T);if(!o&&this.isIosConnectBusyRecoveryCandidate(c)){o=!0,this.logger?.error("[EpsonPrinter] iOS busy connect suspected stale session. Recovering connection and retrying connect once...",c);try{await this.recoverIosSessionForConnect(n,r),this.logger?.info?.("[EpsonPrinter] iOS connect recovery succeeded."),this.isConnecting=!1;return}catch(l){let N=C(l);throw this.logger?.error("[EpsonPrinter] iOS connect recovery failed",N),this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED"),this.isConnecting=!1,N}}throw this.logger?.error(`[EpsonPrinter] Connect failed for ${n}`,c),this.connectionStatus="DISCONNECTED",this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED"),this.isConnecting=!1,c}})}async print(e){if(!g)return;this.disconnectTimer&&(clearTimeout(this.disconnectTimer),this.disconnectTimer=null);let r=0,n=!1;return this.queueController.enqueue(async()=>{let i=await this.sessionManager.ensureSession(),o=$(e);for(;;){r++,this.logger?.info?.(`[EpsonPrinter] Print attempt ${r}`);try{await P(()=>g.print(i,o));break}catch(T){let c=K(T);if(!n&&this.isIosConnectionRecoveryCandidate(c)){n=!0,this.logger?.error("[EpsonPrinter] iOS stale session suspected. Recovering connection and retrying print once...",c);try{i=await this.recoverIosSessionForPrint(),this.logger?.info?.("[EpsonPrinter] iOS session recovery succeeded. Retrying print...");continue}catch(l){let N=C(l);throw this.logger?.error("[EpsonPrinter] iOS session recovery failed",N),N}}if(c.isHardwareError){this.queueController.pause(),this.logger?.error(`[EpsonPrinter] Hardware error on attempt ${r}. Waiting for recovery before retry...`,c),this.recoveryController.start(),await this.queueController.waitUntilResumed(),this.logger?.info?.("[EpsonPrinter] Recovery detected. Sending cut to flush partial print before retry...");try{await g.print(i,[{cmd:"addCut"}])}catch{}this.logger?.info?.("[EpsonPrinter] Retrying print job...")}else throw this.logger?.error(`[EpsonPrinter] Print failed (non-recoverable) on attempt ${r}`,c),c}}}).finally(()=>{this.disconnectTimer&&clearTimeout(this.disconnectTimer),this.disconnectTimer=setTimeout(()=>{this.performDisconnect()},5e3)})}performDisconnect(){this.queueController.enqueueBackground(async()=>{if(!this.disconnectTimer)return;let e=this.sessionManager.getSessionId();if(g&&this.connectionStatus==="CONNECTED"&&e)try{await g.disconnect(e),this.connectionStatus="DISCONNECTED",this.target=null,this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED"),await this.sessionManager.disposeSession()}catch(r){this.logger?.error("[EpsonPrinter] Auto-Disconnect failed",r)}this.disconnectTimer=null})}async printEmbedded(e){try{let r=J(e);return await this.print(r)}catch(r){let n=C(r);throw String(r).includes("MunchiPrinterError")||this.logger?.error("[EpsonPrinter] Embedded print failed",n),n}}async disconnect(){return this.disconnectTimer&&(clearTimeout(this.disconnectTimer),this.disconnectTimer=null),this.queueController.enqueue(async()=>{if(!g)return;let e=this.sessionManager.getSessionId();if(e)try{await g.disconnect(e),this.connectionStatus="DISCONNECTED",this.target=null,this.statusController.handleDisconnected(),this.eventRouter.emitStatus("DISCONNECTED"),this.eventRouter.removeStatusListener(),this.recoveryController.stop()}catch(r){this.logger?.error("[EpsonPrinter] Disconnect failed",r)}finally{this.statusController.clear(),await this.sessionManager.disposeSession()}})}async getStatus(){if(!g)return F;let e=this.sessionManager.getSessionId();if(!e)return F;try{return await g.getStatus(e)}catch(r){throw this.logger?.error("[EpsonPrinter] GetStatus failed",r),C(r)}}async openDrawer(){let e={commands:[{type:"drawer"}]};return this.print(e)}onConnectionChange(e){return this.eventRouter.onConnectionChange(e)}onStatusChange(e){return this.statusController.subscribe(e)}};import{NativeModules as fe}from"react-native";var Z=fe.MunchiEpsonModule,Ne={bluetooth:["BT:"],tcp:["TCP:","TCPS:"],usb:["USB:"]},pe=t=>t.includes("[local_"),Pe=(t,e)=>e?Ne[e].some(n=>t.startsWith(n)):!0,Ie=async t=>{if(!Z)return console.warn("[EpsonDiscovery] Native module not found"),[];try{return(await Z.discover({timeout:t.timeout})).map(X).filter(r=>!r||pe(r.target)?!1:Pe(r.target,t.connectionType))}catch(e){let r=C(e);throw console.error("[EpsonDiscovery] Discovery failed",r),r}};var Se=[[/^TM-m10/i,0],[/^TM-m30III/i,29],[/^TM-m30II/i,21],[/^TM-m30/i,1],[/^TM-m50II/i,30],[/^TM-m50/i,23],[/^TM-m55/i,31],[/^TM-P20II/i,27],[/^TM-P20/i,2],[/^TM-P60II/i,4],[/^TM-P60/i,3],[/^TM-P80II/i,28],[/^TM-P80/i,5],[/^TM-T20/i,6],[/^TM-T60/i,7],[/^TM-T70/i,8],[/^TM-T81/i,9],[/^TM-T82/i,10],[/^TM-T83III/i,19],[/^TM-T83/i,11],[/^TM-T88VII/i,24],[/^TM-T88/i,12],[/^TM-T90KP/i,14],[/^TM-T90/i,13],[/^TM-T100/i,20],[/^TM-U220II/i,32],[/^TM-U220/i,15],[/^TM-U330/i,16],[/^TM-L90LFC/i,25],[/^TM-L90/i,17],[/^TM-L100/i,26],[/^TM-H6000/i,18]],_e=t=>{for(let[e,r]of Se)if(e.test(t))return r;return null};var Oe=t=>{let e=C(t),r=e.message.toUpperCase(),n=t instanceof f?t.isHardwareError:A(t),i=e.translationCode==="printer.error.busy"||r.includes("BUSY")||r.includes("IN_USE")||r.includes("PRINT_BUSY"),o=e.code==="TIMEOUT"||e.translationCode==="printer.error.connection_timeout"||r.includes("TIMEOUT"),T=e.code==="CONNECTION_FAILED"||e.translationCode==="printer.error.offline",c=e.code==="DISCOVERY_FAILED",l="UNKNOWN";return n?l="HARDWARE":i?l="BUSY":o?l="TIMEOUT":T?l="CONNECTION":c?l="DISCOVERY":e.code==="PRINT_FAILED"&&(l="PRINT"),{code:e.code,translationCode:e.translationCode,message:e.message,category:l,isHardwareError:n,retryable:i||o,shouldPauseQueue:n,raw:t}},Ot=t=>Oe(t);import ye from"react";import{createContext as ve,useContext as De,useEffect as Me,useMemo as ee,useState as we}from"react";var te=ve(void 0),bt=({config:t,logger:e,children:r})=>{let[n,i]=we();Me(()=>{e&&q(e)},[e]);let o=ee(()=>{let c={...t,logger:e??t.logger};return ne(c)},[t.lang,t.model,t.target,e]),T=ee(()=>({printer:o,config:t,isReady:!0,error:n}),[o,t,n]);return ye.createElement(te.Provider,{value:T},r)},re=()=>{let t=De(te);if(!t)throw new Error("usePrinter must be used within a PrinterProvider");return t};import{useCallback as B,useEffect as x,useRef as ie,useState as Y}from"react";function Ut(t={}){let{enabled:e=!0}=t,{printer:r,config:n}=re(),[i,o]=Y("DISCONNECTED"),[T,c]=Y(null),[l,N]=Y(null),H=ie("DISCONNECTED"),V=ie(null),m=l!==null,p=B(E=>{V.current=E,N(E)},[]),I=B(E=>{if(E instanceof Error&&E.message){p(E.message);return}if(typeof E=="string"&&E.length>0){p(E);return}p("Unknown printer error")},[p]),a=B(()=>{V.current!==null&&p(null)},[p]);return x(()=>r.onConnectionChange(S=>{H.current=S,o(S),S==="CONNECTED"&&a()}),[a,r]),x(()=>e?r.onStatusChange(S=>{c(S),a()}):void 0,[a,e,r]),x(()=>{e&&i==="CONNECTED"&&r.getStatus().then(E=>{c(E),a()}).catch(I)},[I,a,i,e,r]),x(()=>{let E=H.current;if(e){E==="DISCONNECTED"&&i==="DISCONNECTED"&&r.connect(n.target,5e3).then(a).catch(I);return}(i==="CONNECTED"||i==="CONNECTING")&&r.disconnect().then(a).catch(I)},[I,a,n.target,i,e,r]),{connectionStatus:i,hardwareStatus:T,isError:m,errorMessage:l}}var be="1.0.9";function ne(t){return new b({...t,logger:t.logger??z()})}export{ce as Epos2CallbackCode,ae as Epos2ConnectionEvent,ue as Epos2ErrorStatus,le as Epos2Font,W as Epos2Lang,Q as Epos2StatusEvent,k as EpsonModel,U as FontSize,h as MunchiPrinterError,f as PrinterError,_ as PrinterErrorCode,bt as PrinterProvider,O as PrinterTranslationCode,be as VERSION,Ie as discoverPrinters,z as getGlobalLogger,ne as getPrinter,Ot as resolveEpsonError,_e as resolveModelFromBluetoothName,Oe as resolvePrinterError,q as setGlobalLogger,re as usePrinter,Ut as usePrinterStatus};

package/dist/utils/errorUtils.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"errorUtils.d.ts","sourceRoot":"","sources":["../../src/utils/errorUtils.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,kBAAkB,EAA4C,MAAM,WAAW,CAAC;AAuCzF,eAAO,MAAM,cAAc,GAAI,OAAO,OAAO,KAAG,kBAgK/C,CAAC"}
+{"version":3,"file":"errorUtils.d.ts","sourceRoot":"","sources":["../../src/utils/errorUtils.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,kBAAkB,EAA4C,MAAM,WAAW,CAAC;AAuCzF,eAAO,MAAM,cAAc,GAAI,OAAO,OAAO,KAAG,kBAqK/C,CAAC"}

package/dist/version.d.ts

@@ -1,2 +1,2 @@
-export declare const VERSION = "1.0.7";
+export declare const VERSION = "1.0.9";
 //# sourceMappingURL=version.d.ts.map

package/ios/Vendors/Epson/MunchiEpsonModule.swift

@@ -24,6 +24,7 @@ class MunchiEpsonModule: RCTEventEmitter, Epos2ConnectionDelegate, Epos2PtrStatu
   private var discoveryResolve: RCTPromiseResolveBlock?
   private var discoveryReject: RCTPromiseRejectBlock?
   private var foundPrinters: [NSDictionary] = []
+  private let printerQueue = DispatchQueue(label: "com.munchiepsonprinter.epson")
 
   override func supportedEvents() -> [String]! {
     return ["onPrinterStatusChange", "onPrinterConnectionChange", "onPrinterReceive"]
@@ -95,319 +96,363 @@ class MunchiEpsonModule: RCTEventEmitter, Epos2ConnectionDelegate, Epos2PtrStatu
 
   @objc(initSession:rejecter:)
   func initSession(_ resolve: @escaping RCTPromiseResolveBlock, reject: @escaping RCTPromiseRejectBlock) {
-      let sessionId = UUID().uuidString
-      sessions[sessionId] = EpsonSession(sessionId: sessionId)
-      resolve(sessionId)
+      printerQueue.async { [weak self] in
+          guard let self = self else { return }
+
+          let sessionId = UUID().uuidString
+          self.sessions[sessionId] = EpsonSession(sessionId: sessionId)
+          resolve(sessionId)
+      }
   }
 
   @objc(disposeSession:resolver:rejecter:)
   func disposeSession(_ sessionId: String, resolve: @escaping RCTPromiseResolveBlock, reject: @escaping RCTPromiseRejectBlock) {
-      guard let session = sessions.removeValue(forKey: sessionId) else {
+      printerQueue.async { [weak self] in
+          guard let self = self else { return }
+
+          guard let session = self.sessions.removeValue(forKey: sessionId) else {
+              resolve(true)
+              return
+          }
+
+          self.teardownPrinter(session, disconnect: true)
           resolve(true)
-          return
       }
-
-      teardownPrinter(session, disconnect: true)
-      resolve(true)
   }
 
   @objc(connect:target:timeout:model:lang:resolver:rejecter:)
   func connect(_ sessionId: String, target: String, timeout: Double, model: Int, lang: Int, resolve: @escaping RCTPromiseResolveBlock, reject: @escaping RCTPromiseRejectBlock) {
-    guard let session = sessions[sessionId] else {
-        reject("SESSION_ERROR", "Session not found", nil)
-        return
-    }
+    printerQueue.async { [weak self] in
+        guard let self = self else { return }
 
-    var connectionDelay = 0.0
+        guard let session = self.sessions[sessionId] else {
+            reject("SESSION_ERROR", "Session not found", nil)
+            return
+        }
 
-    if session.printer != nil {
-        teardownPrinter(session, disconnect: true)
-        connectionDelay = 0.5
-    }
+        var connectionDelay = 0.0
 
-    DispatchQueue.main.asyncAfter(deadline: .now() + connectionDelay) { [weak self] in
-        guard let self = self else { return }
-        guard let latestSession = self.sessions[sessionId] else {
-            reject("SESSION_ERROR", "Session disposed while connecting", nil)
-            return
+        if session.printer != nil {
+            self.teardownPrinter(session, disconnect: true)
+            connectionDelay = 0.5
         }
 
-        if let ownerSessionId = self.targetToSessionId[target], ownerSessionId != sessionId {
-            if let ownerSession = self.sessions[ownerSessionId] {
-                if ownerSession.printResolve != nil {
-                    reject("TARGET_IN_USE", "Target is busy with an active print job: \(target)", nil)
-                    return
+        self.printerQueue.asyncAfter(deadline: .now() + connectionDelay) { [weak self] in
+            guard let self = self else { return }
+            guard let latestSession = self.sessions[sessionId] else {
+                reject("SESSION_ERROR", "Session disposed while connecting", nil)
+                return
+            }
+
+            if let ownerSessionId = self.targetToSessionId[target], ownerSessionId != sessionId {
+                if let ownerSession = self.sessions[ownerSessionId] {
+                    if ownerSession.printResolve != nil {
+                        reject("TARGET_IN_USE", "Target is busy with an active print job: \(target)", nil)
+                        return
+                    }
+                    _ = self.teardownPrinter(ownerSession, disconnect: true)
+                } else {
+                    self.targetToSessionId.removeValue(forKey: target)
                 }
-                _ = self.teardownPrinter(ownerSession, disconnect: true)
-            } else {
-                self.targetToSessionId.removeValue(forKey: target)
             }
-        }
 
-        let safeLang = self.normalizedLanguage(lang)
-        let safeModel = self.normalizedModel(model)
+            let safeLang = self.normalizedLanguage(lang)
+            let safeModel = self.normalizedModel(model)
 
-        latestSession.printer = Epos2Printer(printerSeries: safeModel, lang: safeLang)
+            latestSession.printer = Epos2Printer(printerSeries: safeModel, lang: safeLang)
 
-        guard let p = latestSession.printer else {
-            reject("INIT_ERROR", "Failed to initialize printer object", nil)
-            return
-        }
-
-        p.setConnectionEventDelegate(self)
-        p.setStatusChangeEventDelegate(self)
-        p.setReceiveEventDelegate(self)
-        self.printerToSessionId[ObjectIdentifier(p)] = sessionId
-        latestSession.target = target
-
-        let connectTimeout = Int(timeout)
-        let result = p.connect(target, timeout: connectTimeout)
+            guard let p = latestSession.printer else {
+                reject("INIT_ERROR", "Failed to initialize printer object", nil)
+                return
+            }
 
-        if result == EPOS2_SUCCESS.rawValue {
-            _ = p.startMonitor()
-            self.targetToSessionId[target] = sessionId
-            resolve("Connected to \(target)")
-        } else {
-            self.teardownPrinter(latestSession, disconnect: false)
-            reject("CONNECT_ERROR", "Failed to connect: \(result)", nil)
+            p.setConnectionEventDelegate(self)
+            p.setStatusChangeEventDelegate(self)
+            p.setReceiveEventDelegate(self)
+            self.printerToSessionId[ObjectIdentifier(p)] = sessionId
+            latestSession.target = target
+
+            let connectTimeout = Int(timeout)
+            let result = p.connect(target, timeout: connectTimeout)
+
+            if result == EPOS2_SUCCESS.rawValue {
+                _ = p.startMonitor()
+                self.targetToSessionId[target] = sessionId
+                resolve("Connected to \(target)")
+            } else if self.isBusyError(result) {
+                self.teardownPrinter(latestSession, disconnect: false)
+                reject("PRINT_BUSY", "Printer is busy: \(result) (\(self.getErrorDescription(result)))", nil)
+            } else {
+                self.teardownPrinter(latestSession, disconnect: false)
+                reject("CONNECT_ERROR", "Failed to connect: \(result)", nil)
+            }
         }
     }
   }
 
   @objc(disconnect:resolver:rejecter:)
   func disconnect(_ sessionId: String, resolve: @escaping RCTPromiseResolveBlock, reject: @escaping RCTPromiseRejectBlock) {
-    guard let session = sessions[sessionId] else {
-        resolve(true)
-        return
-    }
+    printerQueue.async { [weak self] in
+        guard let self = self else { return }
+
+        guard let session = self.sessions[sessionId] else {
+            resolve(true)
+            return
+        }
 
-    let result = teardownPrinter(session, disconnect: true)
+        let result = self.teardownPrinter(session, disconnect: true)
 
-    if result == nil || result == EPOS2_SUCCESS.rawValue {
-        resolve(true)
-    } else {
-        resolve(false)
+        if result == nil || result == EPOS2_SUCCESS.rawValue {
+            resolve(true)
+        } else {
+            resolve(false)
+        }
     }
   }
 
   // --- Delegate Methods ---
 
   func onConnection(_ deviceObj: Any!, eventType: Int32) {
-    guard
-        let obj = deviceObj as AnyObject?,
-        let sessionId = printerToSessionId[ObjectIdentifier(obj)],
-        let session = sessions[sessionId]
-    else { return }
-
-    var status = "UNKNOWN"
-    switch eventType {
-    case EPOS2_EVENT_RECONNECTING.rawValue:
-        status = "RECONNECTING"
-    case EPOS2_EVENT_RECONNECT.rawValue:
-        status = "RECONNECTED"
-    case EPOS2_EVENT_DISCONNECT.rawValue:
-        status = "DISCONNECTED"
-    default:
-        break
-    }
+    printerQueue.async { [weak self] in
+        guard let self = self else { return }
+        guard
+            let obj = deviceObj as AnyObject?,
+            let sessionId = self.printerToSessionId[ObjectIdentifier(obj)],
+            let session = self.sessions[sessionId]
+        else { return }
+
+        var status = "UNKNOWN"
+        switch eventType {
+        case EPOS2_EVENT_RECONNECTING.rawValue:
+            status = "RECONNECTING"
+        case EPOS2_EVENT_RECONNECT.rawValue:
+            status = "RECONNECTED"
+        case EPOS2_EVENT_DISCONNECT.rawValue:
+            status = "DISCONNECTED"
+        default:
+            break
+        }
 
-    sendEvent(withName: "onPrinterConnectionChange", body: [
-        "sessionId": session.sessionId,
-        "status": status,
-        "target": session.target ?? ""
-    ])
+        self.sendEvent(withName: "onPrinterConnectionChange", body: [
+            "sessionId": session.sessionId,
+            "status": status,
+            "target": session.target ?? ""
+        ])
+    }
   }
 
   func onPtrStatusChange(_ printerObj: Epos2Printer!, eventType: Int32) {
-    guard
-        let sessionId = printerToSessionId[ObjectIdentifier(printerObj)],
-        let session = sessions[sessionId]
-    else { return }
-
-    sendEvent(withName: "onPrinterStatusChange", body: [
-        "sessionId": session.sessionId,
-        "target": session.target ?? "",
-        "eventType": eventType
-    ])
+    printerQueue.async { [weak self] in
+        guard let self = self else { return }
+        guard
+            let sessionId = self.printerToSessionId[ObjectIdentifier(printerObj)],
+            let session = self.sessions[sessionId]
+        else { return }
+
+        self.sendEvent(withName: "onPrinterStatusChange", body: [
+            "sessionId": session.sessionId,
+            "target": session.target ?? "",
+            "eventType": eventType
+        ])
+    }
   }
 
   func onPtrReceive(_ printerObj: Epos2Printer!, code: Int32, status: Epos2PrinterStatusInfo!, printJobId: String!) {
-      guard
-          let sessionId = printerToSessionId[ObjectIdentifier(printerObj)],
-          let session = sessions[sessionId]
-      else { return }
-
-      session.printTimeoutWork?.cancel()
-      session.printTimeoutWork = nil
-
-      if let resolve = session.printResolve, let reject = session.printReject {
-          if code == EPOS2_CODE_SUCCESS.rawValue {
-              resolve(true)
-          } else {
-              reject("PRINT_FAILURE", "Print finished with error code: \(code)", nil)
+      printerQueue.async { [weak self] in
+          guard let self = self else { return }
+          guard
+              let sessionId = self.printerToSessionId[ObjectIdentifier(printerObj)],
+              let session = self.sessions[sessionId]
+          else { return }
+
+          session.printTimeoutWork?.cancel()
+          session.printTimeoutWork = nil
+
+          if let resolve = session.printResolve, let reject = session.printReject {
+              if code == EPOS2_CODE_SUCCESS.rawValue {
+                  resolve(true)
+              } else if self.isBusyCallbackCode(code) {
+                  reject("PRINT_BUSY", "Printer is busy with error code: \(code)", nil)
+              } else {
+                  reject("PRINT_FAILURE", "Print finished with error code: \(code)", nil)
+              }
+              session.printResolve = nil
+              session.printReject = nil
           }
-          session.printResolve = nil
-          session.printReject = nil
-      }
 
-      sendEvent(withName: "onPrinterReceive", body: [
-          "sessionId": session.sessionId,
-          "target": session.target ?? "",
-          "code": code
-      ])
+          self.sendEvent(withName: "onPrinterReceive", body: [
+              "sessionId": session.sessionId,
+              "target": session.target ?? "",
+              "code": code
+          ])
+      }
   }
 
   @objc(print:commands:resolver:rejecter:)
   func print(_ sessionId: String, commands: NSArray, resolve: @escaping RCTPromiseResolveBlock, reject: @escaping RCTPromiseRejectBlock) {
-    guard let session = sessions[sessionId], let p = session.printer else {
-        reject("PRINT_ERROR", "Printer not connected", nil)
-        return
-    }
+    printerQueue.async { [weak self] in
+        guard let self = self else { return }
+        guard let session = self.sessions[sessionId], let p = session.printer else {
+            reject("PRINT_ERROR", "Printer not connected", nil)
+            return
+        }
 
-    if session.printResolve != nil {
-        reject("PRINT_BUSY", "Another print job is in progress", nil)
-        return
-    }
+        if session.printResolve != nil {
+            reject("PRINT_BUSY", "Another print job is in progress", nil)
+            return
+        }
 
-    p.clearCommandBuffer()
-
-    for command in commands {
-        if let cmd = command as? NSDictionary, let type = cmd["cmd"] as? String {
-            switch type {
-            case "addText":
-                if let data = cmd["data"] as? String {
-                  if let align = cmd["align"] as? String {
-                      var alignVal = EPOS2_ALIGN_LEFT.rawValue
-                      if align == "center" { alignVal = EPOS2_ALIGN_CENTER.rawValue }
-                      else if align == "right" { alignVal = EPOS2_ALIGN_RIGHT.rawValue }
-                      p.addTextAlign(alignVal)
-                  }
-                  if let bold = cmd["bold"] as? Bool {
-                      p.addTextStyle(EPOS2_PARAM_DEFAULT, ul: EPOS2_PARAM_DEFAULT, em: bold ? EPOS2_TRUE : EPOS2_FALSE, color: EPOS2_PARAM_DEFAULT)
-                  }
-                  if let size = cmd["size"] as? String {
-                  }
-                  p.addText(data)
-                }
-            case "addTextAlign":
-                if let align = cmd["align"] as? String {
-                    var alignVal = EPOS2_ALIGN_LEFT.rawValue
-                    if align == "center" { alignVal = EPOS2_ALIGN_CENTER.rawValue }
-                    else if align == "right" { alignVal = EPOS2_ALIGN_RIGHT.rawValue }
-                    p.addTextAlign(alignVal)
-                }
-            case "addTextStyle":
-                 if let bold = cmd["bold"] as? Bool {
-                     p.addTextStyle(EPOS2_PARAM_DEFAULT, ul: EPOS2_PARAM_DEFAULT, em: bold ? EPOS2_TRUE : EPOS2_FALSE, color: EPOS2_PARAM_DEFAULT)
-                 }
-            case "addTextSize":
-                if let w = cmd["width"] as? Int, let h = cmd["height"] as? Int {
-                    p.addTextSize(Int(w), height: Int(h))
-                }
-            case "addBarcode":
-                if let data = cmd["data"] as? String, let typeStr = cmd["type"] as? String {
-                    var type = EPOS2_BARCODE_CODE39.rawValue 
-                    if typeStr == "UPC-A" { type = EPOS2_BARCODE_UPC_A.rawValue }
-                    else if typeStr == "UPC-E" { type = EPOS2_BARCODE_UPC_E.rawValue }
-                    else if typeStr == "EAN13" { type = EPOS2_BARCODE_EAN13.rawValue }
-                    else if typeStr == "EAN8" { type = EPOS2_BARCODE_EAN8.rawValue }
-                    else if typeStr == "CODE39" { type = EPOS2_BARCODE_CODE39.rawValue }
-                    else if typeStr == "ITF" { type = EPOS2_BARCODE_ITF.rawValue }
-                    else if typeStr == "CODABAR" { type = EPOS2_BARCODE_CODABAR.rawValue }
-
-                    p.addBarcode(data, type: type, hri: EPOS2_HRI_BELOW.rawValue, font: EPOS2_FONT_A.rawValue, width: 2, height: 100)
-                }
-            case "addSymbol":
-                 if let data = cmd["data"] as? String {
-                     p.addSymbol(data, type: EPOS2_SYMBOL_QRCODE_MODEL_2.rawValue, level: EPOS2_LEVEL_M.rawValue, width: 3, height: 3, size: 0)
-                 }
-            case "addCut":
-                p.addCut(EPOS2_CUT_FEED.rawValue)
-            case "addFeedLine":
-                if let line = cmd["line"] as? Int {
-                  p.addFeedLine(Int(line))
-                }
-            case "addPulse":
-                p.addPulse(EPOS2_DRAWER_2PIN.rawValue, time: EPOS2_PULSE_100.rawValue)
-            case "addTextLang":
-                if let lang = cmd["lang"] as? Int {
-                    p.addTextLang(Int32(lang))
-                }
-            case "addTextFont":
-                if let font = cmd["font"] as? Int {
-                    p.addTextFont(Int32(font))
-                }
-            case "addImage":
-                if let image = image(for: cmd) {
-                    let width = Int(image.size.width.rounded(.up))
-                    let height = Int(image.size.height.rounded(.up))
-                    p.add(
-                        image,
-                        x: 0,
-                        y: 0,
-                        width: width,
-                        height: height,
-                        color: EPOS2_COLOR_1.rawValue,
-                        mode: EPOS2_MODE_MONO.rawValue,
-                        halftone: EPOS2_HALFTONE_DITHER.rawValue,
-                        brightness: Double(EPOS2_PARAM_DEFAULT),
-                        compress: EPOS2_COMPRESS_AUTO.rawValue
-                    )
+        p.clearCommandBuffer()
+
+        for command in commands {
+            if let cmd = command as? NSDictionary, let type = cmd["cmd"] as? String {
+                switch type {
+                case "addText":
+                    if let data = cmd["data"] as? String {
+                      if let align = cmd["align"] as? String {
+                          var alignVal = EPOS2_ALIGN_LEFT.rawValue
+                          if align == "center" { alignVal = EPOS2_ALIGN_CENTER.rawValue }
+                          else if align == "right" { alignVal = EPOS2_ALIGN_RIGHT.rawValue }
+                          p.addTextAlign(alignVal)
+                      }
+                      if let bold = cmd["bold"] as? Bool {
+                          p.addTextStyle(EPOS2_PARAM_DEFAULT, ul: EPOS2_PARAM_DEFAULT, em: bold ? EPOS2_TRUE : EPOS2_FALSE, color: EPOS2_PARAM_DEFAULT)
+                      }
+                      if let size = cmd["size"] as? String {
+                      }
+                      p.addText(data)
+                    }
+                case "addTextAlign":
+                    if let align = cmd["align"] as? String {
+                        var alignVal = EPOS2_ALIGN_LEFT.rawValue
+                        if align == "center" { alignVal = EPOS2_ALIGN_CENTER.rawValue }
+                        else if align == "right" { alignVal = EPOS2_ALIGN_RIGHT.rawValue }
+                        p.addTextAlign(alignVal)
+                    }
+                case "addTextStyle":
+                     if let bold = cmd["bold"] as? Bool {
+                         p.addTextStyle(EPOS2_PARAM_DEFAULT, ul: EPOS2_PARAM_DEFAULT, em: bold ? EPOS2_TRUE : EPOS2_FALSE, color: EPOS2_PARAM_DEFAULT)
+                     }
+                case "addTextSize":
+                    if let w = cmd["width"] as? Int, let h = cmd["height"] as? Int {
+                        p.addTextSize(Int(w), height: Int(h))
+                    }
+                case "addBarcode":
+                    if let data = cmd["data"] as? String, let typeStr = cmd["type"] as? String {
+                        var type = EPOS2_BARCODE_CODE39.rawValue
+                        if typeStr == "UPC-A" { type = EPOS2_BARCODE_UPC_A.rawValue }
+                        else if typeStr == "UPC-E" { type = EPOS2_BARCODE_UPC_E.rawValue }
+                        else if typeStr == "EAN13" { type = EPOS2_BARCODE_EAN13.rawValue }
+                        else if typeStr == "EAN8" { type = EPOS2_BARCODE_EAN8.rawValue }
+                        else if typeStr == "CODE39" { type = EPOS2_BARCODE_CODE39.rawValue }
+                        else if typeStr == "ITF" { type = EPOS2_BARCODE_ITF.rawValue }
+                        else if typeStr == "CODABAR" { type = EPOS2_BARCODE_CODABAR.rawValue }
+
+                        p.addBarcode(data, type: type, hri: EPOS2_HRI_BELOW.rawValue, font: EPOS2_FONT_A.rawValue, width: 2, height: 100)
+                    }
+                case "addSymbol":
+                     if let data = cmd["data"] as? String {
+                         p.addSymbol(data, type: EPOS2_SYMBOL_QRCODE_MODEL_2.rawValue, level: EPOS2_LEVEL_M.rawValue, width: 3, height: 3, size: 0)
+                     }
+                case "addCut":
+                    p.addCut(EPOS2_CUT_FEED.rawValue)
+                case "addFeedLine":
+                    if let line = cmd["line"] as? Int {
+                      p.addFeedLine(Int(line))
+                    }
+                case "addPulse":
+                    p.addPulse(EPOS2_DRAWER_2PIN.rawValue, time: EPOS2_PULSE_100.rawValue)
+                case "addTextLang":
+                    if let lang = cmd["lang"] as? Int {
+                        p.addTextLang(Int32(lang))
+                    }
+                case "addTextFont":
+                    if let font = cmd["font"] as? Int {
+                        p.addTextFont(Int32(font))
+                    }
+                case "addImage":
+                    if let image = self.image(for: cmd) {
+                        let width = Int(image.size.width.rounded(.up))
+                        let height = Int(image.size.height.rounded(.up))
+                        p.add(
+                            image,
+                            x: 0,
+                            y: 0,
+                            width: width,
+                            height: height,
+                            color: EPOS2_COLOR_1.rawValue,
+                            mode: EPOS2_MODE_MONO.rawValue,
+                            halftone: EPOS2_HALFTONE_DITHER.rawValue,
+                            brightness: Double(EPOS2_PARAM_DEFAULT),
+                            compress: EPOS2_COMPRESS_AUTO.rawValue
+                        )
+                    }
+                default:
+                    break
                 }
-            default:
-                break
             }
         }
-    }
 
-    session.printResolve = resolve
-    session.printReject = reject
-
-    let result = p.sendData(Int(EPOS2_PARAM_DEFAULT))
-    if result != EPOS2_SUCCESS.rawValue {
-        let errorMsg = getErrorDescription(result)
-        session.printResolve = nil
-        session.printReject = nil
-        reject("PRINT_ERROR", "Failed to send data: \(result) (\(errorMsg))", nil)
-    } else {
-        let timeoutWork = DispatchWorkItem { [weak self] in
-            guard
-                let self = self,
-                let timedSession = self.sessions[sessionId]
-            else { return }
-
-            if let reject = timedSession.printReject {
-                reject("PRINT_TIMEOUT", "Print timed out waiting for printer response", nil)
+        session.printResolve = resolve
+        session.printReject = reject
+
+        let result = p.sendData(Int(EPOS2_PARAM_DEFAULT))
+        if result != EPOS2_SUCCESS.rawValue {
+            let errorMsg = self.getErrorDescription(result)
+            session.printResolve = nil
+            session.printReject = nil
+            if self.isBusyError(result) {
+                reject("PRINT_BUSY", "Printer is busy: \(result) (\(errorMsg))", nil)
+            } else {
+                reject("PRINT_ERROR", "Failed to send data: \(result) (\(errorMsg))", nil)
+            }
+        } else {
+            let timeoutWork = DispatchWorkItem { [weak self] in
+                guard let self = self else { return }
+
+                self.printerQueue.async { [weak self] in
+                    guard
+                        let self = self,
+                        let timedSession = self.sessions[sessionId]
+                    else { return }
+
+                    if let reject = timedSession.printReject {
+                        reject("PRINT_TIMEOUT", "Print timed out waiting for printer response", nil)
+                    }
+                    timedSession.printResolve = nil
+                    timedSession.printReject = nil
+                    timedSession.printTimeoutWork = nil
+                    timedSession.printer?.clearCommandBuffer()
+                }
             }
-            timedSession.printResolve = nil
-            timedSession.printReject = nil
-            timedSession.printTimeoutWork = nil
-            timedSession.printer?.clearCommandBuffer()
+            session.printTimeoutWork = timeoutWork
+            DispatchQueue.main.asyncAfter(deadline: .now() + 30, execute: timeoutWork)
         }
-        session.printTimeoutWork = timeoutWork
-        DispatchQueue.main.asyncAfter(deadline: .now() + 30, execute: timeoutWork)
     }
   }
 
   @objc(getStatus:resolver:rejecter:)
   func getStatus(_ sessionId: String, resolve: @escaping RCTPromiseResolveBlock, reject: @escaping RCTPromiseRejectBlock) {
-    guard let session = sessions[sessionId], let p = session.printer else {
-        reject("STATUS_ERROR", "Printer not connected", nil)
-        return
-    }
+    printerQueue.async { [weak self] in
+        guard let self = self else { return }
+        guard let session = self.sessions[sessionId], let p = session.printer else {
+            reject("STATUS_ERROR", "Printer not connected", nil)
+            return
+        }
 
-    if let status = p.getStatus() {
-        let statusDict: [String: Any] = [
-            "online": status.connection == EPOS2_TRUE,
-            "coverOpen": status.coverOpen == EPOS2_TRUE,
-            "paper": status.paper == EPOS2_PAPER_EMPTY.rawValue ? "EMPTY" : (status.paper == EPOS2_PAPER_NEAR_END.rawValue ? "NEAR_EMPTY" : "OK"),
-            "paperEmpty": status.paper == EPOS2_PAPER_EMPTY.rawValue, // legacy compat
-            "drawerOpen": status.drawer == EPOS2_DRAWER_HIGH.rawValue, // HIGH typically means open/signal high depending on wiring, assuming HIGH = Open for now based on common usage
-            "errorStatus": status.errorStatus == EPOS2_MECHANICAL_ERR.rawValue ? "MECHANICAL_ERR" : (status.errorStatus == EPOS2_AUTOCUTTER_ERR.rawValue ? "AUTOCUTTER_ERR" : "NONE")
-        ]
-        resolve(statusDict)
-    } else {
-        reject("STATUS_ERROR", "Failed to retrieve status", nil)
+        if let status = p.getStatus() {
+            let statusDict: [String: Any] = [
+                "online": status.connection == EPOS2_TRUE,
+                "coverOpen": status.coverOpen == EPOS2_TRUE,
+                "paper": status.paper == EPOS2_PAPER_EMPTY.rawValue ? "EMPTY" : (status.paper == EPOS2_PAPER_NEAR_END.rawValue ? "NEAR_EMPTY" : "OK"),
+                "paperEmpty": status.paper == EPOS2_PAPER_EMPTY.rawValue,
+                "drawerOpen": status.drawer == EPOS2_DRAWER_HIGH.rawValue,
+                "errorStatus": status.errorStatus == EPOS2_MECHANICAL_ERR.rawValue ? "MECHANICAL_ERR" : (status.errorStatus == EPOS2_AUTOCUTTER_ERR.rawValue ? "AUTOCUTTER_ERR" : "NONE")
+            ]
+            resolve(statusDict)
+        } else {
+            reject("STATUS_ERROR", "Failed to retrieve status", nil)
+        }
     }
   }
 
@@ -423,6 +468,7 @@ class MunchiEpsonModule: RCTEventEmitter, Epos2ConnectionDelegate, Epos2PtrStatu
       case EPOS2_ERR_PROCESSING.rawValue: return "ERR_PROCESSING"
       case EPOS2_ERR_NOT_FOUND.rawValue: return "ERR_NOT_FOUND"
       case EPOS2_ERR_IN_USE.rawValue: return "ERR_IN_USE"
+      case EPOS2_ERR_DEVICE_BUSY.rawValue: return "ERR_DEVICE_BUSY"
       case EPOS2_ERR_TYPE_INVALID.rawValue: return "ERR_TYPE_INVALID"
       case EPOS2_ERR_DISCONNECT.rawValue: return "ERR_DISCONNECT"
       case EPOS2_ERR_ALREADY_OPENED.rawValue: return "ERR_ALREADY_OPENED"
@@ -435,6 +481,30 @@ class MunchiEpsonModule: RCTEventEmitter, Epos2ConnectionDelegate, Epos2PtrStatu
       }
   }
 
+  private func isBusyError(_ code: Int32) -> Bool {
+      switch code {
+      case EPOS2_ERR_PROCESSING.rawValue,
+           EPOS2_ERR_IN_USE.rawValue,
+           EPOS2_ERR_DEVICE_BUSY.rawValue:
+          return true
+      default:
+          return false
+      }
+  }
+
+  private func isBusyCallbackCode(_ code: Int32) -> Bool {
+      switch code {
+      case EPOS2_CODE_PRINTING.rawValue,
+           EPOS2_CODE_ERR_DEVICE_BUSY.rawValue,
+           EPOS2_CODE_ERR_IN_USE.rawValue,
+           EPOS2_CODE_ERR_PROCESSING.rawValue,
+           EPOS2_CODE_RETRY.rawValue:
+          return true
+      default:
+          return false
+      }
+  }
+
   private func normalizedLanguage(_ lang: Int) -> Int32 {
       if lang >= 0 && lang <= 7 {
           return Int32(lang)

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@munchi_oy/react-native-epson-printer",
-  "version": "1.0.7",
+  "version": "1.0.9",
   "description": "Munchi Printer SDK Bridge",
   "main": "./dist/index.js",
   "module": "./dist/index.mjs",