@motis-project/motis-client 2.0.0 → 2.0.84

package/dist/types.gen.d.ts

@@ -1,11 +1,34 @@
 /**
  * Cause of this alert.
  */
-type AlertCause = 'UNKNOWN_CAUSE' | 'OTHER_CAUSE' | 'TECHNICAL_PROBLEM' | 'STRIKE' | 'DEMONSTRATION' | 'ACCIDENT' | 'HOLIDAY' | 'WEATHER' | 'MAINTENANCE' | 'CONSTRUCTION' | 'POLICE_ACTIVITY' | 'MEDICAL_EMERGENCY';
+type AlertCause =
+	| 'UNKNOWN_CAUSE'
+	| 'OTHER_CAUSE'
+	| 'TECHNICAL_PROBLEM'
+	| 'STRIKE'
+	| 'DEMONSTRATION'
+	| 'ACCIDENT'
+	| 'HOLIDAY'
+	| 'WEATHER'
+	| 'MAINTENANCE'
+	| 'CONSTRUCTION'
+	| 'POLICE_ACTIVITY'
+	| 'MEDICAL_EMERGENCY';
 /**
  * The effect of this problem on the affected entity.
  */
-type AlertEffect = 'NO_SERVICE' | 'REDUCED_SERVICE' | 'SIGNIFICANT_DELAYS' | 'DETOUR' | 'ADDITIONAL_SERVICE' | 'MODIFIED_SERVICE' | 'OTHER_EFFECT' | 'UNKNOWN_EFFECT' | 'STOP_MOVED' | 'NO_EFFECT' | 'ACCESSIBILITY_ISSUE';
+type AlertEffect =
+	| 'NO_SERVICE'
+	| 'REDUCED_SERVICE'
+	| 'SIGNIFICANT_DELAYS'
+	| 'DETOUR'
+	| 'ADDITIONAL_SERVICE'
+	| 'MODIFIED_SERVICE'
+	| 'OTHER_EFFECT'
+	| 'UNKNOWN_EFFECT'
+	| 'STOP_MOVED'
+	| 'NO_EFFECT'
+	| 'ACCESSIBILITY_ISSUE';
 /**
  * The severity of the alert.
  */
@@ -16,146 +39,143 @@ type AlertSeverityLevel = 'UNKNOWN_SEVERITY' | 'INFO' | 'WARNING' | 'SEVERE';
  *
  */
 type TimeRange = {
-    /**
-     * If missing, the interval starts at minus infinity.
-     * If a TimeRange is provided, either start or end must be provided - both fields cannot be empty.
-     *
-     */
-    start?: string;
-    /**
-     * If missing, the interval ends at plus infinity.
-     * If a TimeRange is provided, either start or end must be provided - both fields cannot be empty.
-     *
-     */
-    end?: string;
+	/**
+	 * If missing, the interval starts at minus infinity.
+	 * If a TimeRange is provided, either start or end must be provided - both fields cannot be empty.
+	 *
+	 */
+	start?: string;
+	/**
+	 * If missing, the interval ends at plus infinity.
+	 * If a TimeRange is provided, either start or end must be provided - both fields cannot be empty.
+	 *
+	 */
+	end?: string;
 };
 /**
  * An alert, indicating some sort of incident in the public transit network.
  */
 type Alert = {
-    /**
-     * Time when the alert should be shown to the user.
-     * If missing, the alert will be shown as long as it appears in the feed.
-     * If multiple ranges are given, the alert will be shown during all of them.
-     *
-     */
-    communicationPeriod?: Array<TimeRange>;
-    /**
-     * Time when the services are affected by the disruption mentioned in the alert.
-     */
-    impactPeriod?: Array<TimeRange>;
-    cause?: AlertCause;
-    /**
-     * Description of the cause of the alert that allows for agency-specific language;
-     * more specific than the Cause.
-     *
-     */
-    causeDetail?: string;
-    effect?: AlertEffect;
-    /**
-     * Description of the effect of the alert that allows for agency-specific language;
-     * more specific than the Effect.
-     *
-     */
-    effectDetail?: string;
-    /**
-     * The URL which provides additional information about the alert.
-     */
-    url?: string;
-    /**
-     * Header for the alert. This plain-text string will be highlighted, for example in boldface.
-     *
-     */
-    headerText: string;
-    /**
-     * Description for the alert.
-     * This plain-text string will be formatted as the body of the alert (or shown on an explicit "expand" request by the user).
-     * The information in the description should add to the information of the header.
-     *
-     */
-    descriptionText: string;
-    /**
-     * Text containing the alert's header to be used for text-to-speech implementations.
-     * This field is the text-to-speech version of header_text.
-     * It should contain the same information as headerText but formatted such that it can read as text-to-speech
-     * (for example, abbreviations removed, numbers spelled out, etc.)
-     *
-     */
-    ttsHeaderText?: string;
-    /**
-     * Text containing a description for the alert to be used for text-to-speech implementations.
-     * This field is the text-to-speech version of description_text.
-     * It should contain the same information as description_text but formatted such that it can be read as text-to-speech
-     * (for example, abbreviations removed, numbers spelled out, etc.)
-     *
-     */
-    ttsDescriptionText?: string;
-    /**
-     * Severity of the alert.
-     */
-    severityLevel?: AlertSeverityLevel;
-    /**
-     * String containing an URL linking to an image.
-     */
-    imageUrl?: string;
-    /**
-     * IANA media type as to specify the type of image to be displayed. The type must start with "image/"
-     *
-     */
-    imageMediaType?: string;
-    /**
-     * Text describing the appearance of the linked image in the image field
-     * (e.g., in case the image can't be displayed or the user can't see the image for accessibility reasons).
-     * See the HTML spec for alt image text.
-     *
-     */
-    imageAlternativeText?: string;
+	/**
+	 * Time when the alert should be shown to the user.
+	 * If missing, the alert will be shown as long as it appears in the feed.
+	 * If multiple ranges are given, the alert will be shown during all of them.
+	 *
+	 */
+	communicationPeriod?: Array<TimeRange>;
+	/**
+	 * Time when the services are affected by the disruption mentioned in the alert.
+	 */
+	impactPeriod?: Array<TimeRange>;
+	cause?: AlertCause;
+	/**
+	 * Description of the cause of the alert that allows for agency-specific language;
+	 * more specific than the Cause.
+	 *
+	 */
+	causeDetail?: string;
+	effect?: AlertEffect;
+	/**
+	 * Description of the effect of the alert that allows for agency-specific language;
+	 * more specific than the Effect.
+	 *
+	 */
+	effectDetail?: string;
+	/**
+	 * The URL which provides additional information about the alert.
+	 */
+	url?: string;
+	/**
+	 * Header for the alert. This plain-text string will be highlighted, for example in boldface.
+	 *
+	 */
+	headerText: string;
+	/**
+	 * Description for the alert.
+	 * This plain-text string will be formatted as the body of the alert (or shown on an explicit "expand" request by the user).
+	 * The information in the description should add to the information of the header.
+	 *
+	 */
+	descriptionText: string;
+	/**
+	 * Text containing the alert's header to be used for text-to-speech implementations.
+	 * This field is the text-to-speech version of header_text.
+	 * It should contain the same information as headerText but formatted such that it can read as text-to-speech
+	 * (for example, abbreviations removed, numbers spelled out, etc.)
+	 *
+	 */
+	ttsHeaderText?: string;
+	/**
+	 * Text containing a description for the alert to be used for text-to-speech implementations.
+	 * This field is the text-to-speech version of description_text.
+	 * It should contain the same information as description_text but formatted such that it can be read as text-to-speech
+	 * (for example, abbreviations removed, numbers spelled out, etc.)
+	 *
+	 */
+	ttsDescriptionText?: string;
+	/**
+	 * Severity of the alert.
+	 */
+	severityLevel?: AlertSeverityLevel;
+	/**
+	 * String containing an URL linking to an image.
+	 */
+	imageUrl?: string;
+	/**
+	 * IANA media type as to specify the type of image to be displayed. The type must start with "image/"
+	 *
+	 */
+	imageMediaType?: string;
+	/**
+	 * Text describing the appearance of the linked image in the image field
+	 * (e.g., in case the image can't be displayed or the user can't see the image for accessibility reasons).
+	 * See the HTML spec for alt image text.
+	 *
+	 */
+	imageAlternativeText?: string;
 };
 /**
  * Object containing duration if a path was found or none if no path was found
  */
 type Duration = {
-    /**
-     * duration in seconds if a path was found, otherwise missing
-     */
-    duration?: number;
+	/**
+	 * duration in seconds if a path was found, otherwise missing
+	 */
+	duration?: number;
 };
 /**
  * Administrative area
  */
 type Area = {
-    /**
-     * Name of the area
-     */
-    name: string;
-    /**
-     * [OpenStreetMap `admin_level`](https://wiki.openstreetmap.org/wiki/Key:admin_level)
-     * of the area
-     *
-     */
-    adminLevel: number;
-    /**
-     * Whether this area was matched by the input text
-     */
-    matched: boolean;
-    /**
-     * Set for the first area after the `default` area that distinguishes areas
-     * if the match is ambiguous regarding (`default` area + place name / street [+ house number]).
-     *
-     */
-    unique?: boolean;
-    /**
-     * Whether this area should be displayed as default area (area with admin level closest 7)
-     */
-    default?: boolean;
+	/**
+	 * Name of the area
+	 */
+	name: string;
+	/**
+	 * [OpenStreetMap `admin_level`](https://wiki.openstreetmap.org/wiki/Key:admin_level)
+	 * of the area
+	 *
+	 */
+	adminLevel: number;
+	/**
+	 * Whether this area was matched by the input text
+	 */
+	matched: boolean;
+	/**
+	 * Set for the first area after the `default` area that distinguishes areas
+	 * if the match is ambiguous regarding (`default` area + place name / street [+ house number]).
+	 *
+	 */
+	unique?: boolean;
+	/**
+	 * Whether this area should be displayed as default area (area with admin level closest 7)
+	 */
+	default?: boolean;
 };
 /**
  * Matched token range (from index, length)
  */
-type Token = [
-    number,
-    number
-];
+type Token = [number, number];
 /**
  * location type
  */
@@ -164,53 +184,53 @@ type LocationType = 'ADDRESS' | 'PLACE' | 'STOP';
  * GeoCoding match
  */
 type Match = {
-    type: LocationType;
-    /**
-     * list of non-overlapping tokens that were matched
-     */
-    tokens: Array<Token>;
-    /**
-     * name of the location (transit stop / PoI / address)
-     */
-    name: string;
-    /**
-     * unique ID of the location
-     */
-    id: string;
-    /**
-     * latitude
-     */
-    lat: number;
-    /**
-     * longitude
-     */
-    lon: number;
-    /**
-     * level according to OpenStreetMap
-     * (at the moment only for public transport)
-     *
-     */
-    level?: number;
-    /**
-     * street name
-     */
-    street?: string;
-    /**
-     * house number
-     */
-    houseNumber?: string;
-    /**
-     * zip code
-     */
-    zip?: string;
-    /**
-     * list of areas
-     */
-    areas: Array<Area>;
-    /**
-     * score according to the internal scoring system (the scoring algorithm might change in the future)
-     */
-    score: number;
+	type: LocationType;
+	/**
+	 * list of non-overlapping tokens that were matched
+	 */
+	tokens: Array<Token>;
+	/**
+	 * name of the location (transit stop / PoI / address)
+	 */
+	name: string;
+	/**
+	 * unique ID of the location
+	 */
+	id: string;
+	/**
+	 * latitude
+	 */
+	lat: number;
+	/**
+	 * longitude
+	 */
+	lon: number;
+	/**
+	 * level according to OpenStreetMap
+	 * (at the moment only for public transport)
+	 *
+	 */
+	level?: number;
+	/**
+	 * street name
+	 */
+	street?: string;
+	/**
+	 * house number
+	 */
+	houseNumber?: string;
+	/**
+	 * zip code
+	 */
+	zip?: string;
+	/**
+	 * list of areas
+	 */
+	areas: Array<Area>;
+	/**
+	 * score according to the internal scoring system (the scoring algorithm might change in the future)
+	 */
+	score: number;
 };
 /**
  * Different elevation cost profiles for street routing.
@@ -231,10 +251,11 @@ type PedestrianProfile = 'FOOT' | 'WHEELCHAIR';
  *
  * - `WALK`
  * - `BIKE`
- * - `RENTAL` Experimental. Expect unannounced breaking changes (without version bumps).
+ * - `RENTAL` Experimental. Expect unannounced breaking changes (without version bumps) for all parameters and returned structs.
  * - `CAR`
- * - `CAR_PARKING`
- * - `ODM`
+ * - `CAR_PARKING` Experimental. Expect unannounced breaking changes (without version bumps) for all parameters and returned structs.
+ * - `ODM` on-demand taxis from the Prima+ÖV Project
+ * - `FLEX` flexible transports
  *
  * # Transit modes
  *
@@ -252,9 +273,37 @@ type PedestrianProfile = 'FOOT' | 'WHEELCHAIR';
  * - `NIGHT_RAIL`: long distance night trains
  * - `REGIONAL_FAST_RAIL`: regional express routes that skip low traffic stops to be faster
  * - `REGIONAL_RAIL`: regional train
+ * - `CABLE_CAR`: Cable tram. Used for street-level rail cars where the cable runs beneath the vehicle (e.g., cable car in San Francisco).
+ * - `FUNICULAR`: Funicular. Any rail system designed for steep inclines.
+ * - `AREAL_LIFT`: Aerial lift, suspended cable car (e.g., gondola lift, aerial tramway). Cable transport where cabins, cars, gondolas or open chairs are suspended by means of one or more cables.
  *
  */
-type Mode = 'WALK' | 'BIKE' | 'RENTAL' | 'CAR' | 'CAR_PARKING' | 'ODM' | 'TRANSIT' | 'TRAM' | 'SUBWAY' | 'FERRY' | 'AIRPLANE' | 'METRO' | 'BUS' | 'COACH' | 'RAIL' | 'HIGHSPEED_RAIL' | 'LONG_DISTANCE' | 'NIGHT_RAIL' | 'REGIONAL_FAST_RAIL' | 'REGIONAL_RAIL' | 'OTHER';
+type Mode =
+	| 'WALK'
+	| 'BIKE'
+	| 'RENTAL'
+	| 'CAR'
+	| 'CAR_PARKING'
+	| 'ODM'
+	| 'FLEX'
+	| 'TRANSIT'
+	| 'TRAM'
+	| 'SUBWAY'
+	| 'FERRY'
+	| 'AIRPLANE'
+	| 'METRO'
+	| 'BUS'
+	| 'COACH'
+	| 'RAIL'
+	| 'HIGHSPEED_RAIL'
+	| 'LONG_DISTANCE'
+	| 'NIGHT_RAIL'
+	| 'REGIONAL_FAST_RAIL'
+	| 'REGIONAL_RAIL'
+	| 'CABLE_CAR'
+	| 'FUNICULAR'
+	| 'AREAL_LIFT'
+	| 'OTHER';
 /**
  * - `NORMAL` - latitude / longitude coordinate or address
  * - `BIKESHARE` - bike sharing station
@@ -269,461 +318,528 @@ type VertexType = 'NORMAL' | 'BIKESHARE' | 'TRANSIT';
  */
 type PickupDropoffType = 'NORMAL' | 'NOT_ALLOWED';
 type Place = {
-    /**
-     * name of the transit stop / PoI / address
-     */
-    name: string;
-    /**
-     * The ID of the stop. This is often something that users don't care about.
-     */
-    stopId?: string;
-    /**
-     * latitude
-     */
-    lat: number;
-    /**
-     * longitude
-     */
-    lon: number;
-    /**
-     * level according to OpenStreetMap
-     */
-    level: number;
-    /**
-     * arrival time
-     */
-    arrival?: string;
-    /**
-     * departure time
-     */
-    departure?: string;
-    /**
-     * scheduled arrival time
-     */
-    scheduledArrival?: string;
-    /**
-     * scheduled departure time
-     */
-    scheduledDeparture?: string;
-    /**
-     * scheduled track from the static schedule timetable dataset
-     */
-    scheduledTrack?: string;
-    /**
-     * The current track/platform information, updated with real-time updates if available.
-     * Can be missing if neither real-time updates nor the schedule timetable contains track information.
-     *
-     */
-    track?: string;
-    vertexType?: VertexType;
-    /**
-     * Type of pickup. It could be disallowed due to schedule, skipped stops or cancellations.
-     */
-    pickupType?: PickupDropoffType;
-    /**
-     * Type of dropoff. It could be disallowed due to schedule, skipped stops or cancellations.
-     */
-    dropoffType?: PickupDropoffType;
-    /**
-     * Whether this stop is cancelled due to the realtime situation.
-     */
-    cancelled?: boolean;
-    /**
-     * Alerts for this stop.
-     */
-    alerts?: Array<Alert>;
+	/**
+	 * name of the transit stop / PoI / address
+	 */
+	name: string;
+	/**
+	 * The ID of the stop. This is often something that users don't care about.
+	 */
+	stopId?: string;
+	/**
+	 * latitude
+	 */
+	lat: number;
+	/**
+	 * longitude
+	 */
+	lon: number;
+	/**
+	 * level according to OpenStreetMap
+	 */
+	level: number;
+	/**
+	 * arrival time
+	 */
+	arrival?: string;
+	/**
+	 * departure time
+	 */
+	departure?: string;
+	/**
+	 * scheduled arrival time
+	 */
+	scheduledArrival?: string;
+	/**
+	 * scheduled departure time
+	 */
+	scheduledDeparture?: string;
+	/**
+	 * scheduled track from the static schedule timetable dataset
+	 */
+	scheduledTrack?: string;
+	/**
+	 * The current track/platform information, updated with real-time updates if available.
+	 * Can be missing if neither real-time updates nor the schedule timetable contains track information.
+	 *
+	 */
+	track?: string;
+	/**
+	 * description of the location that provides more detailed information
+	 */
+	description?: string;
+	vertexType?: VertexType;
+	/**
+	 * Type of pickup. It could be disallowed due to schedule, skipped stops or cancellations.
+	 */
+	pickupType?: PickupDropoffType;
+	/**
+	 * Type of dropoff. It could be disallowed due to schedule, skipped stops or cancellations.
+	 */
+	dropoffType?: PickupDropoffType;
+	/**
+	 * Whether this stop is cancelled due to the realtime situation.
+	 */
+	cancelled?: boolean;
+	/**
+	 * Alerts for this stop.
+	 */
+	alerts?: Array<Alert>;
+	/**
+	 * for `FLEX` transports, the flex location area or location group name
+	 */
+	flex?: string;
+	/**
+	 * for `FLEX` transports, the flex location area ID or location group ID
+	 */
+	flexId?: string;
+	/**
+	 * Time that on-demand service becomes available
+	 */
+	flexStartPickupDropOffWindow?: string;
+	/**
+	 * Time that on-demand service ends
+	 */
+	flexEndPickupDropOffWindow?: string;
 };
 /**
  * Place reachable by One-to-All
  */
 type ReachablePlace = {
-    /**
-     * Place reached by One-to-All
-     */
-    place?: Place;
-    /**
-     * Total travel duration
-     */
-    duration?: number;
-    /**
-     * k is the smallest number, for which a journey with the shortest duration and at most k-1 transfers exist.
-     * You can think of k as the number of connections used.
-     *
-     * In more detail:
-     *
-     * k=0: No connection, e.g. for the one location
-     * k=1: Direct connection
-     * k=2: Connection with 1 transfer
-     *
-     */
-    k?: number;
+	/**
+	 * Place reached by One-to-All
+	 */
+	place?: Place;
+	/**
+	 * Total travel duration
+	 */
+	duration?: number;
+	/**
+	 * k is the smallest number, for which a journey with the shortest duration and at most k-1 transfers exist.
+	 * You can think of k as the number of connections used.
+	 *
+	 * In more detail:
+	 *
+	 * k=0: No connection, e.g. for the one location
+	 * k=1: Direct connection
+	 * k=2: Connection with 1 transfer
+	 *
+	 */
+	k?: number;
 };
 /**
  * Object containing all reachable places by One-to-All search
  */
 type Reachable = {
-    /**
-     * One location used in One-to-All search
-     */
-    one?: Place;
-    /**
-     * List of locations reachable by One-to-All
-     */
-    all?: Array<ReachablePlace>;
+	/**
+	 * One location used in One-to-All search
+	 */
+	one?: Place;
+	/**
+	 * List of locations reachable by One-to-All
+	 */
+	all?: Array<ReachablePlace>;
 };
 /**
  * departure or arrival event at a stop
  */
 type StopTime = {
-    /**
-     * information about the stop place and time
-     */
-    place: Place;
-    /**
-     * Transport mode for this leg
-     */
-    mode: Mode;
-    /**
-     * Whether there is real-time data about this leg
-     */
-    realTime: boolean;
-    /**
-     * For transit legs, the headsign of the bus or train being used.
-     * For non-transit legs, null
-     *
-     */
-    headsign: string;
-    agencyId: string;
-    agencyName: string;
-    agencyUrl: string;
-    routeColor?: string;
-    routeTextColor?: string;
-    tripId: string;
-    routeShortName: string;
-    /**
-     * Type of pickup (for departures) or dropoff (for arrivals), may be disallowed either due to schedule, skipped stops or cancellations
-     */
-    pickupDropoffType: PickupDropoffType;
-    /**
-     * Whether the departure/arrival is cancelled due to the realtime situation.
-     */
-    cancelled: boolean;
-    /**
-     * Filename and line number where this trip is from
-     */
-    source: string;
+	/**
+	 * information about the stop place and time
+	 */
+	place: Place;
+	/**
+	 * Transport mode for this leg
+	 */
+	mode: Mode;
+	/**
+	 * Whether there is real-time data about this leg
+	 */
+	realTime: boolean;
+	/**
+	 * For transit legs, the headsign of the bus or train being used.
+	 * For non-transit legs, null
+	 *
+	 */
+	headsign: string;
+	agencyId: string;
+	agencyName: string;
+	agencyUrl: string;
+	routeColor?: string;
+	routeTextColor?: string;
+	tripId: string;
+	routeShortName: string;
+	/**
+	 * Type of pickup (for departures) or dropoff (for arrivals), may be disallowed either due to schedule, skipped stops or cancellations
+	 */
+	pickupDropoffType: PickupDropoffType;
+	/**
+	 * Whether the departure/arrival is cancelled due to the realtime situation.
+	 */
+	cancelled: boolean;
+	/**
+	 * Filename and line number where this trip is from
+	 */
+	source: string;
 };
 /**
  * trip id and name
  */
 type TripInfo = {
-    /**
-     * trip ID (dataset trip id prefixed with the dataset tag)
-     */
-    tripId: string;
-    /**
-     * trip display name
-     */
-    routeShortName: string;
+	/**
+	 * trip ID (dataset trip id prefixed with the dataset tag)
+	 */
+	tripId: string;
+	/**
+	 * trip display name
+	 */
+	routeShortName: string;
 };
 /**
  * trip segment between two stops to show a trip on a map
  */
 type TripSegment = {
-    trips: Array<TripInfo>;
-    routeColor?: string;
-    /**
-     * Transport mode for this leg
-     */
-    mode: Mode;
-    /**
-     * distance in meters
-     */
-    distance: number;
-    from: Place;
-    to: Place;
-    /**
-     * departure time
-     */
-    departure: string;
-    /**
-     * arrival time
-     */
-    arrival: string;
-    /**
-     * scheduled departure time
-     */
-    scheduledDeparture: string;
-    /**
-     * scheduled arrival time
-     */
-    scheduledArrival: string;
-    /**
-     * Whether there is real-time data about this leg
-     */
-    realTime: boolean;
-    /**
-     * Google polyline encoded coordinate sequence (with precision 5) where the trip travels on this segment.
-     */
-    polyline: string;
+	trips: Array<TripInfo>;
+	routeColor?: string;
+	/**
+	 * Transport mode for this leg
+	 */
+	mode: Mode;
+	/**
+	 * distance in meters
+	 */
+	distance: number;
+	from: Place;
+	to: Place;
+	/**
+	 * departure time
+	 */
+	departure: string;
+	/**
+	 * arrival time
+	 */
+	arrival: string;
+	/**
+	 * scheduled departure time
+	 */
+	scheduledDeparture: string;
+	/**
+	 * scheduled arrival time
+	 */
+	scheduledArrival: string;
+	/**
+	 * Whether there is real-time data about this leg
+	 */
+	realTime: boolean;
+	/**
+	 * Google polyline encoded coordinate sequence (with precision 5) where the trip travels on this segment.
+	 */
+	polyline: string;
 };
-type Direction = 'DEPART' | 'HARD_LEFT' | 'LEFT' | 'SLIGHTLY_LEFT' | 'CONTINUE' | 'SLIGHTLY_RIGHT' | 'RIGHT' | 'HARD_RIGHT' | 'CIRCLE_CLOCKWISE' | 'CIRCLE_COUNTERCLOCKWISE' | 'STAIRS' | 'ELEVATOR' | 'UTURN_LEFT' | 'UTURN_RIGHT';
+type Direction =
+	| 'DEPART'
+	| 'HARD_LEFT'
+	| 'LEFT'
+	| 'SLIGHTLY_LEFT'
+	| 'CONTINUE'
+	| 'SLIGHTLY_RIGHT'
+	| 'RIGHT'
+	| 'HARD_RIGHT'
+	| 'CIRCLE_CLOCKWISE'
+	| 'CIRCLE_COUNTERCLOCKWISE'
+	| 'STAIRS'
+	| 'ELEVATOR'
+	| 'UTURN_LEFT'
+	| 'UTURN_RIGHT';
 type EncodedPolyline = {
-    /**
-     * The encoded points of the polyline using the Google polyline encoding.
-     */
-    points: string;
-    /**
-     * The precision of the returned polyline (7 for /v1, 6 for /v2)
-     * Be aware that with precision 7, coordinates with |longitude| > 107.37 are undefined/will overflow.
-     *
-     */
-    precision: number;
-    /**
-     * The number of points in the string
-     */
-    length: number;
+	/**
+	 * The encoded points of the polyline using the Google polyline encoding.
+	 */
+	points: string;
+	/**
+	 * The precision of the returned polyline (7 for /v1, 6 for /v2)
+	 * Be aware that with precision 7, coordinates with |longitude| > 107.37 are undefined/will overflow.
+	 *
+	 */
+	precision: number;
+	/**
+	 * The number of points in the string
+	 */
+	length: number;
 };
 type StepInstruction = {
-    relativeDirection: Direction;
-    /**
-     * The distance in meters that this step takes.
-     */
-    distance: number;
-    /**
-     * level where this segment starts, based on OpenStreetMap data
-     */
-    fromLevel: number;
-    /**
-     * level where this segment starts, based on OpenStreetMap data
-     */
-    toLevel: number;
-    /**
-     * OpenStreetMap way index
-     */
-    osmWay?: number;
-    polyline: EncodedPolyline;
-    /**
-     * The name of the street.
-     */
-    streetName: string;
-    /**
-     * Not implemented!
-     * When exiting a highway or traffic circle, the exit name/number.
-     *
-     */
-    exit: string;
-    /**
-     * Not implemented!
-     * Indicates whether or not a street changes direction at an intersection.
-     *
-     */
-    stayOn: boolean;
-    /**
-     * Not implemented!
-     * This step is on an open area, such as a plaza or train platform,
-     * and thus the directions should say something like "cross"
-     *
-     */
-    area: boolean;
+	relativeDirection: Direction;
+	/**
+	 * The distance in meters that this step takes.
+	 */
+	distance: number;
+	/**
+	 * level where this segment starts, based on OpenStreetMap data
+	 */
+	fromLevel: number;
+	/**
+	 * level where this segment starts, based on OpenStreetMap data
+	 */
+	toLevel: number;
+	/**
+	 * OpenStreetMap way index
+	 */
+	osmWay?: number;
+	polyline: EncodedPolyline;
+	/**
+	 * The name of the street.
+	 */
+	streetName: string;
+	/**
+	 * Not implemented!
+	 * When exiting a highway or traffic circle, the exit name/number.
+	 *
+	 */
+	exit: string;
+	/**
+	 * Not implemented!
+	 * Indicates whether or not a street changes direction at an intersection.
+	 *
+	 */
+	stayOn: boolean;
+	/**
+	 * Not implemented!
+	 * This step is on an open area, such as a plaza or train platform,
+	 * and thus the directions should say something like "cross"
+	 *
+	 */
+	area: boolean;
+	/**
+	 * Indicates that a fee must be paid by general traffic to use a road, road bridge or road tunnel.
+	 */
+	toll?: boolean;
+	/**
+	 * Experimental. Indicates whether access to this part of the route is restricted.
+	 * See: https://wiki.openstreetmap.org/wiki/Conditional_restrictions
+	 *
+	 */
+	accessRestriction?: string;
+	/**
+	 * incline in meters across this path segment
+	 */
+	elevationUp?: number;
+	/**
+	 * decline in meters across this path segment
+	 */
+	elevationDown?: number;
 };
-type RentalFormFactor = 'BICYCLE' | 'CARGO_BICYCLE' | 'CAR' | 'MOPED' | 'SCOOTER_STANDING' | 'SCOOTER_SEATED' | 'OTHER';
-type RentalPropulsionType = 'HUMAN' | 'ELECTRIC_ASSIST' | 'ELECTRIC' | 'COMBUSTION' | 'COMBUSTION_DIESEL' | 'HYBRID' | 'PLUG_IN_HYBRID' | 'HYDROGEN_FUEL_CELL';
+type RentalFormFactor =
+	| 'BICYCLE'
+	| 'CARGO_BICYCLE'
+	| 'CAR'
+	| 'MOPED'
+	| 'SCOOTER_STANDING'
+	| 'SCOOTER_SEATED'
+	| 'OTHER';
+type RentalPropulsionType =
+	| 'HUMAN'
+	| 'ELECTRIC_ASSIST'
+	| 'ELECTRIC'
+	| 'COMBUSTION'
+	| 'COMBUSTION_DIESEL'
+	| 'HYBRID'
+	| 'PLUG_IN_HYBRID'
+	| 'HYDROGEN_FUEL_CELL';
 type RentalReturnConstraint = 'NONE' | 'ANY_STATION' | 'ROUNDTRIP_STATION';
 /**
  * Vehicle rental
  */
 type Rental = {
-    /**
-     * Vehicle share system ID
-     */
-    systemId: string;
-    /**
-     * Vehicle share system name
-     */
-    systemName?: string;
-    /**
-     * URL of the vehicle share system
-     */
-    url?: string;
-    /**
-     * Name of the station
-     */
-    stationName?: string;
-    /**
-     * Name of the station where the vehicle is picked up (empty for free floating vehicles)
-     */
-    fromStationName?: string;
-    /**
-     * Name of the station where the vehicle is returned (empty for free floating vehicles)
-     */
-    toStationName?: string;
-    /**
-     * Rental URI for Android (deep link to the specific station or vehicle)
-     */
-    rentalUriAndroid?: string;
-    /**
-     * Rental URI for iOS (deep link to the specific station or vehicle)
-     */
-    rentalUriIOS?: string;
-    /**
-     * Rental URI for web (deep link to the specific station or vehicle)
-     */
-    rentalUriWeb?: string;
-    formFactor?: RentalFormFactor;
-    propulsionType?: RentalPropulsionType;
-    returnConstraint?: RentalReturnConstraint;
+	/**
+	 * Vehicle share system ID
+	 */
+	systemId: string;
+	/**
+	 * Vehicle share system name
+	 */
+	systemName?: string;
+	/**
+	 * URL of the vehicle share system
+	 */
+	url?: string;
+	/**
+	 * Name of the station
+	 */
+	stationName?: string;
+	/**
+	 * Name of the station where the vehicle is picked up (empty for free floating vehicles)
+	 */
+	fromStationName?: string;
+	/**
+	 * Name of the station where the vehicle is returned (empty for free floating vehicles)
+	 */
+	toStationName?: string;
+	/**
+	 * Rental URI for Android (deep link to the specific station or vehicle)
+	 */
+	rentalUriAndroid?: string;
+	/**
+	 * Rental URI for iOS (deep link to the specific station or vehicle)
+	 */
+	rentalUriIOS?: string;
+	/**
+	 * Rental URI for web (deep link to the specific station or vehicle)
+	 */
+	rentalUriWeb?: string;
+	formFactor?: RentalFormFactor;
+	propulsionType?: RentalPropulsionType;
+	returnConstraint?: RentalReturnConstraint;
 };
 type Leg = {
-    /**
-     * Transport mode for this leg
-     */
-    mode: Mode;
-    from: Place;
-    to: Place;
-    /**
-     * Leg duration in seconds
-     *
-     * If leg is footpath:
-     * The footpath duration is derived from the default footpath
-     * duration using the query parameters `transferTimeFactor` and
-     * `additionalTransferTime` as follows:
-     * `leg.duration = defaultDuration * transferTimeFactor + additionalTransferTime.`
-     * In case the defaultDuration is needed, it can be calculated by
-     * `defaultDuration = (leg.duration - additionalTransferTime) / transferTimeFactor`.
-     * Note that the default values are `transferTimeFactor = 1` and
-     * `additionalTransferTime = 0` in case they are not explicitly
-     * provided in the query.
-     *
-     */
-    duration: number;
-    /**
-     * leg departure time
-     */
-    startTime: string;
-    /**
-     * leg arrival time
-     */
-    endTime: string;
-    /**
-     * scheduled leg departure time
-     */
-    scheduledStartTime: string;
-    /**
-     * scheduled leg arrival time
-     */
-    scheduledEndTime: string;
-    /**
-     * Whether there is real-time data about this leg
-     */
-    realTime: boolean;
-    /**
-     * Whether this leg was originally scheduled to run or is an additional service.
-     * Scheduled times will equal realtime times in this case.
-     *
-     */
-    scheduled: boolean;
-    /**
-     * For non-transit legs the distance traveled while traversing this leg in meters.
-     */
-    distance?: number;
-    /**
-     * For transit legs, if the rider should stay on the vehicle as it changes route names.
-     */
-    interlineWithPreviousLeg?: boolean;
-    /**
-     * For transit legs, the headsign of the bus or train being used.
-     * For non-transit legs, null
-     *
-     */
-    headsign?: string;
-    routeColor?: string;
-    routeTextColor?: string;
-    routeType?: string;
-    agencyName?: string;
-    agencyUrl?: string;
-    agencyId?: string;
-    tripId?: string;
-    routeShortName?: string;
-    /**
-     * Whether this trip is cancelled
-     */
-    cancelled?: boolean;
-    /**
-     * Filename and line number where this trip is from
-     */
-    source?: string;
-    /**
-     * For transit legs, intermediate stops between the Place where the leg originates
-     * and the Place where the leg ends. For non-transit legs, null.
-     *
-     */
-    intermediateStops?: Array<Place>;
-    legGeometry: EncodedPolyline;
-    /**
-     * A series of turn by turn instructions
-     * used for walking, biking and driving.
-     *
-     */
-    steps?: Array<StepInstruction>;
-    rental?: Rental;
-    /**
-     * Index into `Itinerary.fareTransfers` array
-     * to identify which fare transfer this leg belongs to
-     *
-     */
-    fareTransferIndex?: number;
-    /**
-     * Index into the `Itinerary.fareTransfers[fareTransferIndex].effectiveFareLegProducts` array
-     * to identify which effective fare leg this itinerary leg belongs to
-     *
-     */
-    effectiveFareLegIndex?: number;
-    /**
-     * Alerts for this stop.
-     */
-    alerts?: Array<Alert>;
+	/**
+	 * Transport mode for this leg
+	 */
+	mode: Mode;
+	from: Place;
+	to: Place;
+	/**
+	 * Leg duration in seconds
+	 *
+	 * If leg is footpath:
+	 * The footpath duration is derived from the default footpath
+	 * duration using the query parameters `transferTimeFactor` and
+	 * `additionalTransferTime` as follows:
+	 * `leg.duration = defaultDuration * transferTimeFactor + additionalTransferTime.`
+	 * In case the defaultDuration is needed, it can be calculated by
+	 * `defaultDuration = (leg.duration - additionalTransferTime) / transferTimeFactor`.
+	 * Note that the default values are `transferTimeFactor = 1` and
+	 * `additionalTransferTime = 0` in case they are not explicitly
+	 * provided in the query.
+	 *
+	 */
+	duration: number;
+	/**
+	 * leg departure time
+	 */
+	startTime: string;
+	/**
+	 * leg arrival time
+	 */
+	endTime: string;
+	/**
+	 * scheduled leg departure time
+	 */
+	scheduledStartTime: string;
+	/**
+	 * scheduled leg arrival time
+	 */
+	scheduledEndTime: string;
+	/**
+	 * Whether there is real-time data about this leg
+	 */
+	realTime: boolean;
+	/**
+	 * Whether this leg was originally scheduled to run or is an additional service.
+	 * Scheduled times will equal realtime times in this case.
+	 *
+	 */
+	scheduled: boolean;
+	/**
+	 * For non-transit legs the distance traveled while traversing this leg in meters.
+	 */
+	distance?: number;
+	/**
+	 * For transit legs, if the rider should stay on the vehicle as it changes route names.
+	 */
+	interlineWithPreviousLeg?: boolean;
+	/**
+	 * For transit legs, the headsign of the bus or train being used.
+	 * For non-transit legs, null
+	 *
+	 */
+	headsign?: string;
+	routeColor?: string;
+	routeTextColor?: string;
+	routeType?: string;
+	agencyName?: string;
+	agencyUrl?: string;
+	agencyId?: string;
+	tripId?: string;
+	routeShortName?: string;
+	/**
+	 * Whether this trip is cancelled
+	 */
+	cancelled?: boolean;
+	/**
+	 * Filename and line number where this trip is from
+	 */
+	source?: string;
+	/**
+	 * For transit legs, intermediate stops between the Place where the leg originates
+	 * and the Place where the leg ends. For non-transit legs, null.
+	 *
+	 */
+	intermediateStops?: Array<Place>;
+	legGeometry: EncodedPolyline;
+	/**
+	 * A series of turn by turn instructions
+	 * used for walking, biking and driving.
+	 *
+	 */
+	steps?: Array<StepInstruction>;
+	rental?: Rental;
+	/**
+	 * Index into `Itinerary.fareTransfers` array
+	 * to identify which fare transfer this leg belongs to
+	 *
+	 */
+	fareTransferIndex?: number;
+	/**
+	 * Index into the `Itinerary.fareTransfers[fareTransferIndex].effectiveFareLegProducts` array
+	 * to identify which effective fare leg this itinerary leg belongs to
+	 *
+	 */
+	effectiveFareLegIndex?: number;
+	/**
+	 * Alerts for this stop.
+	 */
+	alerts?: Array<Alert>;
 };
 type RiderCategory = {
-    /**
-     * Rider category name as displayed to the rider.
-     */
-    riderCategoryName: string;
-    /**
-     * Specifies if this category should be considered the default (i.e. the main category displayed to riders).
-     */
-    isDefaultFareCategory: boolean;
-    /**
-     * URL to a web page providing detailed information about the rider category and/or its eligibility criteria.
-     */
-    eligibilityUrl?: string;
+	/**
+	 * Rider category name as displayed to the rider.
+	 */
+	riderCategoryName: string;
+	/**
+	 * Specifies if this category should be considered the default (i.e. the main category displayed to riders).
+	 */
+	isDefaultFareCategory: boolean;
+	/**
+	 * URL to a web page providing detailed information about the rider category and/or its eligibility criteria.
+	 */
+	eligibilityUrl?: string;
 };
 type FareMediaType = 'NONE' | 'PAPER_TICKET' | 'TRANSIT_CARD' | 'CONTACTLESS_EMV' | 'MOBILE_APP';
 type FareMedia = {
-    /**
-     * Name of the fare media. Required for transit cards and mobile apps.
-     */
-    fareMediaName?: string;
-    /**
-     * The type of fare media.
-     */
-    fareMediaType: FareMediaType;
+	/**
+	 * Name of the fare media. Required for transit cards and mobile apps.
+	 */
+	fareMediaName?: string;
+	/**
+	 * The type of fare media.
+	 */
+	fareMediaType: FareMediaType;
 };
 type FareProduct = {
-    /**
-     * The name of the fare product as displayed to riders.
-     */
-    name: string;
-    /**
-     * The cost of the fare product. May be negative to represent transfer discounts. May be zero to represent a fare product that is free.
-     */
-    amount: number;
-    /**
-     * ISO 4217 currency code. The currency of the cost of the fare product.
-     */
-    currency: string;
-    riderCategory?: RiderCategory;
-    media?: FareMedia;
+	/**
+	 * The name of the fare product as displayed to riders.
+	 */
+	name: string;
+	/**
+	 * The cost of the fare product. May be negative to represent transfer discounts. May be zero to represent a fare product that is free.
+	 */
+	amount: number;
+	/**
+	 * ISO 4217 currency code. The currency of the cost of the fare product.
+	 */
+	currency: string;
+	riderCategory?: RiderCategory;
+	media?: FareMedia;
 };
 type FareTransferRule = 'A_AB' | 'A_AB_B' | 'AB';
 /**
@@ -746,958 +862,1109 @@ type FareTransferRule = 'A_AB' | 'A_AB_B' | 'AB';
  *
  */
 type FareTransfer = {
-    rule?: FareTransferRule;
-    transferProduct?: FareProduct;
-    /**
-     * Lists all valid fare products for the effective fare legs.
-     * This is an `array<array<FareProduct>>` where the inner array
-     * lists all possible fare products that would cover this effective fare leg.
-     * Each "effective fare leg" can have multiple options for adult/child/weekly/monthly/day/one-way tickets etc.
-     * You can see the outer array as AND (you need one ticket for each effective fare leg (`A_AB_B`), the first effective fare leg (`A_AB`) or no fare leg at all but only the transfer product (`AB`)
-     * and the inner array as OR (you can choose which ticket to buy)
-     *
-     */
-    effectiveFareLegProducts: Array<Array<FareProduct>>;
+	rule?: FareTransferRule;
+	transferProducts?: Array<FareProduct>;
+	/**
+	 * Lists all valid fare products for the effective fare legs.
+	 * This is an `array<array<FareProduct>>` where the inner array
+	 * lists all possible fare products that would cover this effective fare leg.
+	 * Each "effective fare leg" can have multiple options for adult/child/weekly/monthly/day/one-way tickets etc.
+	 * You can see the outer array as AND (you need one ticket for each effective fare leg (`A_AB_B`), the first effective fare leg (`A_AB`) or no fare leg at all but only the transfer product (`AB`)
+	 * and the inner array as OR (you can choose which ticket to buy)
+	 *
+	 */
+	effectiveFareLegProducts: Array<Array<Array<FareProduct>>>;
 };
 type Itinerary = {
-    /**
-     * journey duration in seconds
-     */
-    duration: number;
-    /**
-     * journey departure time
-     */
-    startTime: string;
-    /**
-     * journey arrival time
-     */
-    endTime: string;
-    /**
-     * The number of transfers this trip has.
-     */
-    transfers: number;
-    /**
-     * Journey legs
-     */
-    legs: Array<Leg>;
-    /**
-     * Fare information
-     */
-    fareTransfers?: Array<FareTransfer>;
+	/**
+	 * journey duration in seconds
+	 */
+	duration: number;
+	/**
+	 * journey departure time
+	 */
+	startTime: string;
+	/**
+	 * journey arrival time
+	 */
+	endTime: string;
+	/**
+	 * The number of transfers this trip has.
+	 */
+	transfers: number;
+	/**
+	 * Journey legs
+	 */
+	legs: Array<Leg>;
+	/**
+	 * Fare information
+	 */
+	fareTransfers?: Array<FareTransfer>;
 };
 /**
- * footpath from one location to another
+ * transfer from one location to another
  */
-type Footpath = {
-    to: Place;
-    /**
-     * optional; missing if the GTFS did not contain a footpath
-     * footpath duration in minutes according to GTFS (+heuristics)
-     *
-     */
-    default?: number;
-    /**
-     * optional; missing if no path was found (timetable / osr)
-     * footpath duration in minutes for the foot profile
-     *
-     */
-    foot?: number;
-    /**
-     * optional; missing if no path was found with foot routing
-     * footpath duration in minutes for the foot profile
-     *
-     */
-    footRouted?: number;
-    /**
-     * optional; missing if no path was found with the wheelchair profile
-     * footpath duration in minutes for the wheelchair profile
-     *
-     */
-    wheelchair?: number;
-    /**
-     * optional; missing if no path was found with the wheelchair profile
-     * footpath duration in minutes for the wheelchair profile
-     *
-     */
-    wheelchairRouted?: number;
-    /**
-     * optional; missing if no path was found with the wheelchair profile
-     * true if the wheelchair path uses an elevator
-     *
-     */
-    wheelchairUsesElevator?: boolean;
+type Transfer = {
+	to: Place;
+	/**
+	 * optional; missing if the GTFS did not contain a transfer
+	 * transfer duration in minutes according to GTFS (+heuristics)
+	 *
+	 */
+	default?: number;
+	/**
+	 * optional; missing if no path was found (timetable / osr)
+	 * transfer duration in minutes for the foot profile
+	 *
+	 */
+	foot?: number;
+	/**
+	 * optional; missing if no path was found with foot routing
+	 * transfer duration in minutes for the foot profile
+	 *
+	 */
+	footRouted?: number;
+	/**
+	 * optional; missing if no path was found with the wheelchair profile
+	 * transfer duration in minutes for the wheelchair profile
+	 *
+	 */
+	wheelchair?: number;
+	/**
+	 * optional; missing if no path was found with the wheelchair profile
+	 * transfer duration in minutes for the wheelchair profile
+	 *
+	 */
+	wheelchairRouted?: number;
+	/**
+	 * optional; missing if no path was found with the wheelchair profile
+	 * true if the wheelchair path uses an elevator
+	 *
+	 */
+	wheelchairUsesElevator?: boolean;
+	/**
+	 * optional; missing if no path was found with car routing
+	 * transfer duration in minutes for the car profile
+	 *
+	 */
+	car?: number;
 };
 type PlanData = {
-    query: {
-        /**
-         * Optional. Default is 0 minutes.
-         *
-         * Additional transfer time reserved for each transfer in minutes.
-         *
-         */
-        additionalTransferTime?: number;
-        /**
-         * Optional. Default is `false`.
-         *
-         * - `arriveBy=true`: the parameters `date` and `time` refer to the arrival time
-         * - `arriveBy=false`: the parameters `date` and `time` refer to the departure time
-         *
-         */
-        arriveBy?: boolean;
-        /**
-         * - true: Compute transfer polylines and step instructions.
-         * - false: Only return basic information (start time, end time, duration) for transfers.
-         *
-         */
-        detailedTransfers: boolean;
-        /**
-         * Optional. Default is `WALK` which will compute walking routes as direct connections.
-         *
-         * Modes used for direction connections from start to destination without using transit.
-         * Results will be returned on the `direct` key.
-         *
-         * Note: Direct connections will only be returned on the first call. For paging calls, they can be omitted.
-         *
-         * Note: Transit connections that are slower than the fastest direct connection will not show up.
-         * This is being used as a cut-off during transit routing to speed up the search.
-         * To prevent this, it's possible to send two separate requests (one with only `transitModes` and one with only `directModes`).
-         *
-         * Only non-transit modes such as `WALK`, `BIKE`, `CAR`, `BIKE_SHARING`, etc. can be used.
-         *
-         */
-        directModes?: Array<Mode>;
-        /**
-         * Experimental. Expect unannounced breaking changes (without version bumps).
-         *
-         * Optional. Only applies to direct connections.
-         *
-         * A list of vehicle type form factors that are allowed to be used for direct connections.
-         * If empty (the default), all form factors are allowed.
-         * Example: `BICYCLE,SCOOTER_STANDING`.
-         *
-         */
-        directRentalFormFactors?: Array<RentalFormFactor>;
-        /**
-         * Experimental. Expect unannounced breaking changes (without version bumps).
-         *
-         * Optional. Only applies to direct connections.
-         *
-         * A list of vehicle type form factors that are allowed to be used for direct connections.
-         * If empty (the default), all propulsion types are allowed.
-         * Example: `HUMAN,ELECTRIC,ELECTRIC_ASSIST`.
-         *
-         */
-        directRentalPropulsionTypes?: Array<RentalPropulsionType>;
-        /**
-         * Experimental. Expect unannounced breaking changes (without version bumps).
-         *
-         * Optional. Only applies to direct connections.
-         *
-         * A list of rental providers that are allowed to be used for direct connections.
-         * If empty (the default), all providers are allowed.
-         *
-         */
-        directRentalProviders?: Array<(string)>;
-        /**
-         * Optional. Default is `NONE`.
-         *
-         * Set an elevation cost profile, to penalize routes with incline.
-         * - `NONE`: No additional costs for elevations. This is the default behavior
-         * - `LOW`: Add a low cost for increase in elevation and incline along the way. This will prefer routes with less ascent, if small detours are required.
-         * - `HIGH`: Add a high cost for increase in elevation and incline along the way. This will prefer routes with less ascent, if larger detours are required.
-         *
-         * As using an elevation costs profile will increase the travel duration,
-         * routing through steep terrain may exceed the maximal allowed duration,
-         * causing a location to appear unreachable.
-         * Increasing the maximum travel time for these segments may resolve this issue.
-         *
-         * The profile is used for direct routing, on the first mile, and last mile.
-         *
-         * Elevation cost profiles are currently used by following street modes:
-         * - `BIKE`
-         *
-         */
-        elevationCosts?: ElevationCosts;
-        /**
-         * Optional. Experimental. Default is `1.0`.
-         * Factor with which the duration of the fastest direct connection is multiplied.
-         * Values > 1.0 allow connections that are slower than the fastest direct connection to be found.
-         *
-         */
-        fastestDirectFactor?: number;
-        /**
-         * \`latitude,longitude[,level]\` tuple with
-         * - latitude and longitude in degrees
-         * - (optional) level: the OSM level (default: 0)
-         *
-         * OR
-         *
-         * stop id
-         *
-         */
-        fromPlace: string;
-        /**
-         * Optional. Experimental. Number of luggage pieces; base unit: airline cabin luggage (e.g. for ODM or price calculation)
-         *
-         */
-        luggage?: number;
-        /**
-         * Optional. Default is 30min which is `1800`.
-         * Maximum time in seconds for direct connections.
-         *
-         */
-        maxDirectTime?: number;
-        /**
-         * Optional. Default is 25 meters.
-         *
-         * Maximum matching distance in meters to match geo coordinates to the street network.
-         *
-         */
-        maxMatchingDistance?: number;
-        /**
-         * Optional. Default is 15min which is `900`.
-         * Maximum time in seconds for the last street leg.
-         *
-         */
-        maxPostTransitTime?: number;
-        /**
-         * Optional. Default is 15min which is `900`.
-         * Maximum time in seconds for the first street leg.
-         *
-         */
-        maxPreTransitTime?: number;
-        /**
-         * The maximum number of allowed transfers.
-         * If not provided, the routing uses the server-side default value
-         * which is hardcoded and very high to cover all use cases.
-         *
-         * *Warning*: Use with care. Setting this too low can lead to
-         * optimal (e.g. the fastest) journeys not being found.
-         * If this value is too low to reach the destination at all,
-         * it can lead to slow routing performance.
-         *
-         */
-        maxTransfers?: number;
-        /**
-         * The maximum travel time in minutes.
-         * If not provided, the routing to uses the value
-         * hardcoded in the server which is usually quite high.
-         *
-         * *Warning*: Use with care. Setting this too low can lead to
-         * optimal (e.g. the least transfers) journeys not being found.
-         * If this value is too low to reach the destination at all,
-         * it can lead to slow routing performance.
-         *
-         */
-        maxTravelTime?: number;
-        /**
-         * Optional. Default is 0 minutes.
-         *
-         * Minimum transfer time for each transfer in minutes.
-         *
-         */
-        minTransferTime?: number;
-        /**
-         * The minimum number of itineraries to compute.
-         * This is only relevant if `timetableView=true`.
-         * The default value is 5.
-         *
-         */
-        numItineraries?: number;
-        /**
-         * Use the cursor to go to the next "page" of itineraries.
-         * Copy the cursor from the last response and keep the original request as is.
-         * This will enable you to search for itineraries in the next or previous time-window.
-         *
-         */
-        pageCursor?: string;
-        /**
-         * Optional. Experimental. Number of passengers (e.g. for ODM or price calculation)
-         */
-        passengers?: number;
-        /**
-         * Optional. Default is `FOOT`.
-         *
-         * Accessibility profile to use for pedestrian routing in transfers
-         * between transit connections, on the first mile, and last mile.
-         *
-         */
-        pedestrianProfile?: PedestrianProfile;
-        /**
-         * Optional. Default is `WALK`. Only applies if the `to` place is a coordinate (not a transit stop). Does not apply to direct connections (see `directModes`).
-         *
-         * A list of modes that are allowed to be used from the last transit stop to the `to` coordinate. Example: `WALK,BIKE_SHARING`.
-         *
-         */
-        postTransitModes?: Array<Mode>;
-        /**
-         * Experimental. Expect unannounced breaking changes (without version bumps).
-         *
-         * Optional. Only applies if the `to` place is a coordinate (not a transit stop). Does not apply to direct connections (see `directRentalFormFactors`).
-         *
-         * A list of vehicle type form factors that are allowed to be used from the last transit stop to the `to` coordinate.
-         * If empty (the default), all form factors are allowed.
-         * Example: `BICYCLE,SCOOTER_STANDING`.
-         *
-         */
-        postTransitRentalFormFactors?: Array<RentalFormFactor>;
-        /**
-         * Experimental. Expect unannounced breaking changes (without version bumps).
-         *
-         * Optional. Only applies if the `to` place is a coordinate (not a transit stop). Does not apply to direct connections (see `directRentalPropulsionTypes`).
-         *
-         * A list of vehicle propulsion types that are allowed to be used from the last transit stop to the `to` coordinate.
-         * If empty (the default), all propulsion types are allowed.
-         * Example: `HUMAN,ELECTRIC,ELECTRIC_ASSIST`.
-         *
-         */
-        postTransitRentalPropulsionTypes?: Array<RentalPropulsionType>;
-        /**
-         * Experimental. Expect unannounced breaking changes (without version bumps).
-         *
-         * Optional. Only applies if the `to` place is a coordinate (not a transit stop). Does not apply to direct connections (see `directRentalProviders`).
-         *
-         * A list of rental providers that are allowed to be used from the last transit stop to the `to` coordinate.
-         * If empty (the default), all providers are allowed.
-         *
-         */
-        postTransitRentalProviders?: Array<(string)>;
-        /**
-         * Optional. Default is `WALK`. Only applies if the `from` place is a coordinate (not a transit stop). Does not apply to direct connections (see `directModes`).
-         *
-         * A list of modes that are allowed to be used from the `from` coordinate to the first transit stop. Example: `WALK,BIKE_SHARING`.
-         *
-         */
-        preTransitModes?: Array<Mode>;
-        /**
-         * Experimental. Expect unannounced breaking changes (without version bumps).
-         *
-         * Optional. Only applies if the `from` place is a coordinate (not a transit stop). Does not apply to direct connections (see `directRentalFormFactors`).
-         *
-         * A list of vehicle type form factors that are allowed to be used from the `from` coordinate to the first transit stop.
-         * If empty (the default), all form factors are allowed.
-         * Example: `BICYCLE,SCOOTER_STANDING`.
-         *
-         */
-        preTransitRentalFormFactors?: Array<RentalFormFactor>;
-        /**
-         * Experimental. Expect unannounced breaking changes (without version bumps).
-         *
-         * Optional. Only applies if the `from` place is a coordinate (not a transit stop). Does not apply to direct connections (see `directRentalPropulsionTypes`).
-         *
-         * A list of vehicle propulsion types that are allowed to be used from the `from` coordinate to the first transit stop.
-         * If empty (the default), all propulsion types are allowed.
-         * Example: `HUMAN,ELECTRIC,ELECTRIC_ASSIST`.
-         *
-         */
-        preTransitRentalPropulsionTypes?: Array<RentalPropulsionType>;
-        /**
-         * Experimental. Expect unannounced breaking changes (without version bumps).
-         *
-         * Optional. Only applies if the `from` place is a coordinate (not a transit stop). Does not apply to direct connections (see `directRentalProviders`).
-         *
-         * A list of rental providers that are allowed to be used from the `from` coordinate to the first transit stop.
-         * If empty (the default), all providers are allowed.
-         *
-         */
-        preTransitRentalProviders?: Array<(string)>;
-        /**
-         * Optional. Default is `false`.
-         *
-         * If set to `true`, all used transit trips are required to allow bike carriage.
-         *
-         */
-        requireBikeTransport?: boolean;
-        /**
-         * Optional. Default is `false`.
-         *
-         * If set to `true`, all used transit trips are required to allow car carriage.
-         *
-         */
-        requireCarTransport?: boolean;
-        /**
-         * Optional. Default is 2 hours which is `7200`.
-         *
-         * The length of the search-window in seconds. Default value two hours.
-         *
-         * - `arriveBy=true`: number of seconds between the earliest departure time and latest departure time
-         * - `arriveBy=false`: number of seconds between the earliest arrival time and the latest arrival time
-         *
-         */
-        searchWindow?: number;
-        /**
-         * Optional. Defaults to the current time.
-         *
-         * Departure time ($arriveBy=false) / arrival date ($arriveBy=true),
-         *
-         */
-        time?: string;
-        /**
-         * Optional. Query timeout in seconds.
-         */
-        timeout?: number;
-        /**
-         * Optional. Default is `true`.
-         *
-         * Search for the best trip options within a time window.
-         * If true two itineraries are considered optimal
-         * if one is better on arrival time (earliest wins)
-         * and the other is better on departure time (latest wins).
-         * In combination with arriveBy this parameter cover the following use cases:
-         *
-         * `timetable=false` = waiting for the first transit departure/arrival is considered travel time:
-         * - `arriveBy=true`: event (e.g. a meeting) starts at 10:00 am,
-         * compute the best journeys that arrive by that time (maximizes departure time)
-         * - `arriveBy=false`: event (e.g. a meeting) ends at 11:00 am,
-         * compute the best journeys that depart after that time
-         *
-         * `timetable=true` = optimize "later departure" + "earlier arrival" and give all options over a time window:
-         * - `arriveBy=true`: the time window around `date` and `time` refers to the arrival time window
-         * - `arriveBy=false`: the time window around `date` and `time` refers to the departure time window
-         *
-         */
-        timetableView?: boolean;
-        /**
-         * \`latitude,longitude[,level]\` tuple with
-         * - latitude and longitude in degrees
-         * - (optional) level: the OSM level (default: 0)
-         *
-         * OR
-         *
-         * stop id
-         *
-         */
-        toPlace: string;
-        /**
-         * Optional. Default is 1.0
-         *
-         * Factor to multiply minimum required transfer times with.
-         * Values smaller than 1.0 are not supported.
-         *
-         */
-        transferTimeFactor?: number;
-        /**
-         * Optional. Default is `TRANSIT` which allows all transit modes (no restriction).
-         * Allowed modes for the transit part. If empty, no transit connections will be computed.
-         * For example, this can be used to allow only `METRO,SUBWAY,TRAM`.
-         *
-         */
-        transitModes?: Array<Mode>;
-        /**
-         * Optional. Default is `false`.
-         *
-         * Whether to use transfers routed on OpenStreetMap data.
-         *
-         */
-        useRoutedTransfers?: boolean;
-        /**
-         * List of via stops to visit (only stop IDs, no coordinates allowed for now).
-         * Also see the optional parameter `viaMinimumStay` to set a set a minimum stay duration for each via stop.
-         *
-         */
-        via?: Array<(string)>;
-        /**
-         * Optional. If not set, the default is `0,0` - no stay required.
-         *
-         * For each `via` stop a minimum stay duration in minutes.
-         *
-         * The value `0` signals that it's allowed to stay in the same trip.
-         * This enables via stays without counting a transfer and can lead
-         * to better connections with less transfers. Transfer connections can
-         * still be found with `viaMinimumStay=0`.
-         *
-         */
-        viaMinimumStay?: Array<(number)>;
-        /**
-         * Optional. Experimental. If set to true, the response will contain fare information.
-         */
-        withFares?: boolean;
-    };
+	query: {
+		/**
+		 * Optional. Default is 0 minutes.
+		 *
+		 * Additional transfer time reserved for each transfer in minutes.
+		 *
+		 */
+		additionalTransferTime?: number;
+		/**
+		 * Optional. Default is `false`.
+		 *
+		 * - `arriveBy=true`: the parameters `date` and `time` refer to the arrival time
+		 * - `arriveBy=false`: the parameters `date` and `time` refer to the departure time
+		 *
+		 */
+		arriveBy?: boolean;
+		/**
+		 * - true: Compute transfer polylines and step instructions.
+		 * - false: Only return basic information (start time, end time, duration) for transfers.
+		 *
+		 */
+		detailedTransfers: boolean;
+		/**
+		 * Optional. Default is `WALK` which will compute walking routes as direct connections.
+		 *
+		 * Modes used for direction connections from start to destination without using transit.
+		 * Results will be returned on the `direct` key.
+		 *
+		 * Note: Direct connections will only be returned on the first call. For paging calls, they can be omitted.
+		 *
+		 * Note: Transit connections that are slower than the fastest direct connection will not show up.
+		 * This is being used as a cut-off during transit routing to speed up the search.
+		 * To prevent this, it's possible to send two separate requests (one with only `transitModes` and one with only `directModes`).
+		 *
+		 * Note: the output `direct` array will stay empty if the input param `maxDirectTime` makes any direct trip impossible.
+		 *
+		 * Only non-transit modes such as `WALK`, `BIKE`, `CAR`, `BIKE_SHARING`, etc. can be used.
+		 *
+		 */
+		directModes?: Array<Mode>;
+		/**
+		 * Experimental. Expect unannounced breaking changes (without version bumps).
+		 *
+		 * Optional. Only applies to direct connections.
+		 *
+		 * A list of vehicle type form factors that are allowed to be used for direct connections.
+		 * If empty (the default), all form factors are allowed.
+		 * Example: `BICYCLE,SCOOTER_STANDING`.
+		 *
+		 */
+		directRentalFormFactors?: Array<RentalFormFactor>;
+		/**
+		 * Experimental. Expect unannounced breaking changes (without version bumps).
+		 *
+		 * Optional. Only applies to direct connections.
+		 *
+		 * A list of vehicle type form factors that are allowed to be used for direct connections.
+		 * If empty (the default), all propulsion types are allowed.
+		 * Example: `HUMAN,ELECTRIC,ELECTRIC_ASSIST`.
+		 *
+		 */
+		directRentalPropulsionTypes?: Array<RentalPropulsionType>;
+		/**
+		 * Experimental. Expect unannounced breaking changes (without version bumps).
+		 *
+		 * Optional. Only applies to direct connections.
+		 *
+		 * A list of rental providers that are allowed to be used for direct connections.
+		 * If empty (the default), all providers are allowed.
+		 *
+		 */
+		directRentalProviders?: Array<string>;
+		/**
+		 * Optional. Default is `NONE`.
+		 *
+		 * Set an elevation cost profile, to penalize routes with incline.
+		 * - `NONE`: No additional costs for elevations. This is the default behavior
+		 * - `LOW`: Add a low cost for increase in elevation and incline along the way. This will prefer routes with less ascent, if small detours are required.
+		 * - `HIGH`: Add a high cost for increase in elevation and incline along the way. This will prefer routes with less ascent, if larger detours are required.
+		 *
+		 * As using an elevation costs profile will increase the travel duration,
+		 * routing through steep terrain may exceed the maximal allowed duration,
+		 * causing a location to appear unreachable.
+		 * Increasing the maximum travel time for these segments may resolve this issue.
+		 *
+		 * The profile is used for direct routing, on the first mile, and last mile.
+		 *
+		 * Elevation cost profiles are currently used by following street modes:
+		 * - `BIKE`
+		 *
+		 */
+		elevationCosts?: ElevationCosts;
+		/**
+		 * Optional. Experimental. Default is `1.0`.
+		 * Factor with which the duration of the fastest direct connection is multiplied.
+		 * Values > 1.0 allow connections that are slower than the fastest direct connection to be found.
+		 *
+		 */
+		fastestDirectFactor?: number;
+		/**
+		 * \`latitude,longitude[,level]\` tuple with
+		 * - latitude and longitude in degrees
+		 * - (optional) level: the OSM level (default: 0)
+		 *
+		 * OR
+		 *
+		 * stop id
+		 *
+		 */
+		fromPlace: string;
+		/**
+		 * Experimental. Expect unannounced breaking changes (without version bumps).
+		 *
+		 * Optional. Default is `false`.
+		 *
+		 * If set to `true`, the routing will ignore rental return constraints for direct connections,
+		 * allowing the rental vehicle to be parked anywhere.
+		 *
+		 */
+		ignoreDirectRentalReturnConstraints?: boolean;
+		/**
+		 * Experimental. Expect unannounced breaking changes (without version bumps).
+		 *
+		 * Optional. Default is `false`.
+		 *
+		 * If set to `true`, the routing will ignore rental return constraints for the part from the last transit stop to the `to` coordinate,
+		 * allowing the rental vehicle to be parked anywhere.
+		 *
+		 */
+		ignorePostTransitRentalReturnConstraints?: boolean;
+		/**
+		 * Experimental. Expect unannounced breaking changes (without version bumps).
+		 *
+		 * Optional. Default is `false`.
+		 *
+		 * If set to `true`, the routing will ignore rental return constraints for the part from the `from` coordinate to the first transit stop,
+		 * allowing the rental vehicle to be parked anywhere.
+		 *
+		 */
+		ignorePreTransitRentalReturnConstraints?: boolean;
+		/**
+		 * Optional. Experimental. Number of luggage pieces; base unit: airline cabin luggage (e.g. for ODM or price calculation)
+		 *
+		 */
+		luggage?: number;
+		/**
+		 * Optional. Default is 30min which is `1800`.
+		 * Maximum time in seconds for direct connections.
+		 *
+		 */
+		maxDirectTime?: number;
+		/**
+		 * Optional. Default is 25 meters.
+		 *
+		 * Maximum matching distance in meters to match geo coordinates to the street network.
+		 *
+		 */
+		maxMatchingDistance?: number;
+		/**
+		 * Optional. Default is 15min which is `900`.
+		 * Maximum time in seconds for the last street leg.
+		 *
+		 */
+		maxPostTransitTime?: number;
+		/**
+		 * Optional. Default is 15min which is `900`.
+		 * Maximum time in seconds for the first street leg.
+		 *
+		 */
+		maxPreTransitTime?: number;
+		/**
+		 * The maximum number of allowed transfers (i.e. interchanges between transit legs,
+		 * pre- and postTransit do not count as transfers).
+		 * `maxTransfers=0` searches for direct transit connections without any transfers.
+		 * If you want to search only for non-transit connections (`FOOT`, `CAR`, etc.),
+		 * send an empty `transitModes` parameter instead.
+		 *
+		 * If not provided, the routing uses the server-side default value
+		 * which is hardcoded and very high to cover all use cases.
+		 *
+		 * *Warning*: Use with care. Setting this too low can lead to
+		 * optimal (e.g. the fastest) journeys not being found.
+		 * If this value is too low to reach the destination at all,
+		 * it can lead to slow routing performance.
+		 *
+		 * In plan endpoints before v3, the behavior is off by one,
+		 * i.e. `maxTransfers=0` only returns non-transit connections.
+		 *
+		 */
+		maxTransfers?: number;
+		/**
+		 * The maximum travel time in minutes.
+		 * If not provided, the routing to uses the value
+		 * hardcoded in the server which is usually quite high.
+		 *
+		 * *Warning*: Use with care. Setting this too low can lead to
+		 * optimal (e.g. the least transfers) journeys not being found.
+		 * If this value is too low to reach the destination at all,
+		 * it can lead to slow routing performance.
+		 *
+		 */
+		maxTravelTime?: number;
+		/**
+		 * Optional. Default is 0 minutes.
+		 *
+		 * Minimum transfer time for each transfer in minutes.
+		 *
+		 */
+		minTransferTime?: number;
+		/**
+		 * The minimum number of itineraries to compute.
+		 * This is only relevant if `timetableView=true`.
+		 * The default value is 5.
+		 *
+		 */
+		numItineraries?: number;
+		/**
+		 * Use the cursor to go to the next "page" of itineraries.
+		 * Copy the cursor from the last response and keep the original request as is.
+		 * This will enable you to search for itineraries in the next or previous time-window.
+		 *
+		 */
+		pageCursor?: string;
+		/**
+		 * Optional. Experimental. Number of passengers (e.g. for ODM or price calculation)
+		 */
+		passengers?: number;
+		/**
+		 * Optional. Default is `FOOT`.
+		 *
+		 * Accessibility profile to use for pedestrian routing in transfers
+		 * between transit connections, on the first mile, and last mile.
+		 *
+		 */
+		pedestrianProfile?: PedestrianProfile;
+		/**
+		 * Optional. Default is `WALK`. Only applies if the `to` place is a coordinate (not a transit stop). Does not apply to direct connections (see `directModes`).
+		 *
+		 * A list of modes that are allowed to be used from the last transit stop to the `to` coordinate. Example: `WALK,BIKE_SHARING`.
+		 *
+		 */
+		postTransitModes?: Array<Mode>;
+		/**
+		 * Experimental. Expect unannounced breaking changes (without version bumps).
+		 *
+		 * Optional. Only applies if the `to` place is a coordinate (not a transit stop). Does not apply to direct connections (see `directRentalFormFactors`).
+		 *
+		 * A list of vehicle type form factors that are allowed to be used from the last transit stop to the `to` coordinate.
+		 * If empty (the default), all form factors are allowed.
+		 * Example: `BICYCLE,SCOOTER_STANDING`.
+		 *
+		 */
+		postTransitRentalFormFactors?: Array<RentalFormFactor>;
+		/**
+		 * Experimental. Expect unannounced breaking changes (without version bumps).
+		 *
+		 * Optional. Only applies if the `to` place is a coordinate (not a transit stop). Does not apply to direct connections (see `directRentalPropulsionTypes`).
+		 *
+		 * A list of vehicle propulsion types that are allowed to be used from the last transit stop to the `to` coordinate.
+		 * If empty (the default), all propulsion types are allowed.
+		 * Example: `HUMAN,ELECTRIC,ELECTRIC_ASSIST`.
+		 *
+		 */
+		postTransitRentalPropulsionTypes?: Array<RentalPropulsionType>;
+		/**
+		 * Experimental. Expect unannounced breaking changes (without version bumps).
+		 *
+		 * Optional. Only applies if the `to` place is a coordinate (not a transit stop). Does not apply to direct connections (see `directRentalProviders`).
+		 *
+		 * A list of rental providers that are allowed to be used from the last transit stop to the `to` coordinate.
+		 * If empty (the default), all providers are allowed.
+		 *
+		 */
+		postTransitRentalProviders?: Array<string>;
+		/**
+		 * Optional. Default is `WALK`. Only applies if the `from` place is a coordinate (not a transit stop). Does not apply to direct connections (see `directModes`).
+		 *
+		 * A list of modes that are allowed to be used from the `from` coordinate to the first transit stop. Example: `WALK,BIKE_SHARING`.
+		 *
+		 */
+		preTransitModes?: Array<Mode>;
+		/**
+		 * Experimental. Expect unannounced breaking changes (without version bumps).
+		 *
+		 * Optional. Only applies if the `from` place is a coordinate (not a transit stop). Does not apply to direct connections (see `directRentalFormFactors`).
+		 *
+		 * A list of vehicle type form factors that are allowed to be used from the `from` coordinate to the first transit stop.
+		 * If empty (the default), all form factors are allowed.
+		 * Example: `BICYCLE,SCOOTER_STANDING`.
+		 *
+		 */
+		preTransitRentalFormFactors?: Array<RentalFormFactor>;
+		/**
+		 * Experimental. Expect unannounced breaking changes (without version bumps).
+		 *
+		 * Optional. Only applies if the `from` place is a coordinate (not a transit stop). Does not apply to direct connections (see `directRentalPropulsionTypes`).
+		 *
+		 * A list of vehicle propulsion types that are allowed to be used from the `from` coordinate to the first transit stop.
+		 * If empty (the default), all propulsion types are allowed.
+		 * Example: `HUMAN,ELECTRIC,ELECTRIC_ASSIST`.
+		 *
+		 */
+		preTransitRentalPropulsionTypes?: Array<RentalPropulsionType>;
+		/**
+		 * Experimental. Expect unannounced breaking changes (without version bumps).
+		 *
+		 * Optional. Only applies if the `from` place is a coordinate (not a transit stop). Does not apply to direct connections (see `directRentalProviders`).
+		 *
+		 * A list of rental providers that are allowed to be used from the `from` coordinate to the first transit stop.
+		 * If empty (the default), all providers are allowed.
+		 *
+		 */
+		preTransitRentalProviders?: Array<string>;
+		/**
+		 * Optional. Default is `false`.
+		 *
+		 * If set to `true`, all used transit trips are required to allow bike carriage.
+		 *
+		 */
+		requireBikeTransport?: boolean;
+		/**
+		 * Optional. Default is `false`.
+		 *
+		 * If set to `true`, all used transit trips are required to allow car carriage.
+		 *
+		 */
+		requireCarTransport?: boolean;
+		/**
+		 * Optional. Default is 2 hours which is `7200`.
+		 *
+		 * The length of the search-window in seconds. Default value two hours.
+		 *
+		 * - `arriveBy=true`: number of seconds between the earliest departure time and latest departure time
+		 * - `arriveBy=false`: number of seconds between the earliest arrival time and the latest arrival time
+		 *
+		 */
+		searchWindow?: number;
+		/**
+		 * Optional. Experimental. Adds overtaken direct connections.
+		 */
+		slowDirect?: boolean;
+		/**
+		 * Optional. Defaults to the current time.
+		 *
+		 * Departure time ($arriveBy=false) / arrival date ($arriveBy=true),
+		 *
+		 */
+		time?: string;
+		/**
+		 * Optional. Query timeout in seconds.
+		 */
+		timeout?: number;
+		/**
+		 * Optional. Default is `true`.
+		 *
+		 * Search for the best trip options within a time window.
+		 * If true two itineraries are considered optimal
+		 * if one is better on arrival time (earliest wins)
+		 * and the other is better on departure time (latest wins).
+		 * In combination with arriveBy this parameter cover the following use cases:
+		 *
+		 * `timetable=false` = waiting for the first transit departure/arrival is considered travel time:
+		 * - `arriveBy=true`: event (e.g. a meeting) starts at 10:00 am,
+		 * compute the best journeys that arrive by that time (maximizes departure time)
+		 * - `arriveBy=false`: event (e.g. a meeting) ends at 11:00 am,
+		 * compute the best journeys that depart after that time
+		 *
+		 * `timetable=true` = optimize "later departure" + "earlier arrival" and give all options over a time window:
+		 * - `arriveBy=true`: the time window around `date` and `time` refers to the arrival time window
+		 * - `arriveBy=false`: the time window around `date` and `time` refers to the departure time window
+		 *
+		 */
+		timetableView?: boolean;
+		/**
+		 * \`latitude,longitude[,level]\` tuple with
+		 * - latitude and longitude in degrees
+		 * - (optional) level: the OSM level (default: 0)
+		 *
+		 * OR
+		 *
+		 * stop id
+		 *
+		 */
+		toPlace: string;
+		/**
+		 * Optional. Default is 1.0
+		 *
+		 * Factor to multiply minimum required transfer times with.
+		 * Values smaller than 1.0 are not supported.
+		 *
+		 */
+		transferTimeFactor?: number;
+		/**
+		 * Optional. Default is `TRANSIT` which allows all transit modes (no restriction).
+		 * Allowed modes for the transit part. If empty, no transit connections will be computed.
+		 * For example, this can be used to allow only `METRO,SUBWAY,TRAM`.
+		 *
+		 */
+		transitModes?: Array<Mode>;
+		/**
+		 * Optional. Default is `false`.
+		 *
+		 * Whether to use transfers routed on OpenStreetMap data.
+		 *
+		 */
+		useRoutedTransfers?: boolean;
+		/**
+		 * List of via stops to visit (only stop IDs, no coordinates allowed for now).
+		 * Also see the optional parameter `viaMinimumStay` to set a set a minimum stay duration for each via stop.
+		 *
+		 */
+		via?: Array<string>;
+		/**
+		 * Optional. If not set, the default is `0,0` - no stay required.
+		 *
+		 * For each `via` stop a minimum stay duration in minutes.
+		 *
+		 * The value `0` signals that it's allowed to stay in the same trip.
+		 * This enables via stays without counting a transfer and can lead
+		 * to better connections with less transfers. Transfer connections can
+		 * still be found with `viaMinimumStay=0`.
+		 *
+		 */
+		viaMinimumStay?: Array<number>;
+		/**
+		 * Optional. Experimental. If set to true, the response will contain fare information.
+		 */
+		withFares?: boolean;
+	};
+};
+type PlanResponse = {
+	/**
+	 * the routing query
+	 */
+	requestParameters: {
+		[key: string]: string;
+	};
+	/**
+	 * debug statistics
+	 */
+	debugOutput: {
+		[key: string]: number;
+	};
+	from: Place;
+	to: Place;
+	/**
+	 * Direct trips by `WALK`, `BIKE`, `CAR`, etc. without time-dependency.
+	 * The starting time (`arriveBy=false`) / arrival time (`arriveBy=true`) is always the queried `time` parameter (set to \"now\" if not set).
+	 * But all `direct` connections are meant to be independent of absolute times.
+	 *
+	 */
+	direct: Array<Itinerary>;
+	/**
+	 * list of itineraries
+	 */
+	itineraries: Array<Itinerary>;
+	/**
+	 * Use the cursor to get the previous page of results. Insert the cursor into the request and post it to get the previous page.
+	 * The previous page is a set of itineraries departing BEFORE the first itinerary in the result for a depart after search. When using the default sort order the previous set of itineraries is inserted before the current result.
+	 *
+	 */
+	previousPageCursor: string;
+	/**
+	 * Use the cursor to get the next page of results. Insert the cursor into the request and post it to get the next page.
+	 * The next page is a set of itineraries departing AFTER the last itinerary in this result.
+	 *
+	 */
+	nextPageCursor: string;
 };
-type PlanResponse = ({
-    /**
-     * the routing query
-     */
-    requestParameters: {
-        [key: string]: (string);
-    };
-    /**
-     * debug statistics
-     */
-    debugOutput: {
-        [key: string]: (number);
-    };
-    from: Place;
-    to: Place;
-    /**
-     * Direct trips by `WALK`, `BIKE`, `CAR`, etc. without time-dependency.
-     * The starting time (`arriveBy=false`) / arrival time (`arriveBy=true`) is always the queried `time` parameter (set to \"now\" if not set).
-     * But all `direct` connections are meant to be independent of absolute times.
-     *
-     */
-    direct: Array<Itinerary>;
-    /**
-     * list of itineraries
-     */
-    itineraries: Array<Itinerary>;
-    /**
-     * Use the cursor to get the previous page of results. Insert the cursor into the request and post it to get the previous page.
-     * The previous page is a set of itineraries departing BEFORE the first itinerary in the result for a depart after search. When using the default sort order the previous set of itineraries is inserted before the current result.
-     *
-     */
-    previousPageCursor: string;
-    /**
-     * Use the cursor to get the next page of results. Insert the cursor into the request and post it to get the next page.
-     * The next page is a set of itineraries departing AFTER the last itinerary in this result.
-     *
-     */
-    nextPageCursor: string;
-});
 type PlanError = unknown;
 type OneToManyData = {
-    query: {
-        /**
-         * true = many to one
-         * false = one to many
-         *
-         */
-        arriveBy: boolean;
-        /**
-         * Optional. Default is `NONE`.
-         *
-         * Set an elevation cost profile, to penalize routes with incline.
-         * - `NONE`: No additional costs for elevations. This is the default behavior
-         * - `LOW`: Add a low cost for increase in elevation and incline along the way. This will prefer routes with less ascent, if small detours are required.
-         * - `HIGH`: Add a high cost for increase in elevation and incline along the way. This will prefer routes with less ascent, if larger detours are required.
-         *
-         * As using an elevation costs profile will increase the travel duration,
-         * routing through steep terrain may exceed the maximal allowed duration,
-         * causing a location to appear unreachable.
-         * Increasing the maximum travel time for these segments may resolve this issue.
-         *
-         * Elevation cost profiles are currently used by following street modes:
-         * - `BIKE`
-         *
-         */
-        elevationCosts?: ElevationCosts;
-        /**
-         * geo locations as latitude;longitude,latitude;longitude,...
-         */
-        many: Array<(string)>;
-        /**
-         * maximum travel time in seconds
-         */
-        max: number;
-        /**
-         * maximum matching distance in meters to match geo coordinates to the street network
-         */
-        maxMatchingDistance: number;
-        /**
-         * routing profile to use (currently supported: \`WALK\`, \`BIKE\`, \`CAR\`)
-         *
-         */
-        mode: Mode;
-        /**
-         * geo location as latitude;longitude
-         */
-        one: string;
-    };
+	query: {
+		/**
+		 * true = many to one
+		 * false = one to many
+		 *
+		 */
+		arriveBy: boolean;
+		/**
+		 * Optional. Default is `NONE`.
+		 *
+		 * Set an elevation cost profile, to penalize routes with incline.
+		 * - `NONE`: No additional costs for elevations. This is the default behavior
+		 * - `LOW`: Add a low cost for increase in elevation and incline along the way. This will prefer routes with less ascent, if small detours are required.
+		 * - `HIGH`: Add a high cost for increase in elevation and incline along the way. This will prefer routes with less ascent, if larger detours are required.
+		 *
+		 * As using an elevation costs profile will increase the travel duration,
+		 * routing through steep terrain may exceed the maximal allowed duration,
+		 * causing a location to appear unreachable.
+		 * Increasing the maximum travel time for these segments may resolve this issue.
+		 *
+		 * Elevation cost profiles are currently used by following street modes:
+		 * - `BIKE`
+		 *
+		 */
+		elevationCosts?: ElevationCosts;
+		/**
+		 * geo locations as latitude;longitude,latitude;longitude,...
+		 */
+		many: Array<string>;
+		/**
+		 * maximum travel time in seconds
+		 */
+		max: number;
+		/**
+		 * maximum matching distance in meters to match geo coordinates to the street network
+		 */
+		maxMatchingDistance: number;
+		/**
+		 * routing profile to use (currently supported: \`WALK\`, \`BIKE\`, \`CAR\`)
+		 *
+		 */
+		mode: Mode;
+		/**
+		 * geo location as latitude;longitude
+		 */
+		one: string;
+	};
 };
-type OneToManyResponse = (Array<Duration>);
+type OneToManyResponse = Array<Duration>;
 type OneToManyError = unknown;
 type OneToAllData = {
-    query: {
-        /**
-         * Optional. Default is 0 minutes.
-         *
-         * Additional transfer time reserved for each transfer in minutes.
-         *
-         */
-        additionalTransferTime?: number;
-        /**
-         * true = all to one,
-         * false = one to all
-         *
-         */
-        arriveBy?: boolean;
-        /**
-         * Optional. Default is `NONE`.
-         *
-         * Set an elevation cost profile, to penalize routes with incline.
-         * - `NONE`: No additional costs for elevations. This is the default behavior
-         * - `LOW`: Add a low cost for increase in elevation and incline along the way. This will prefer routes with less ascent, if small detours are required.
-         * - `HIGH`: Add a high cost for increase in elevation and incline along the way. This will prefer routes with less ascent, if larger detours are required.
-         *
-         * As using an elevation costs profile will increase the travel duration,
-         * routing through steep terrain may exceed the maximal allowed duration,
-         * causing a location to appear unreachable.
-         * Increasing the maximum travel time for these segments may resolve this issue.
-         *
-         * The profile is used for routing on both the first and last mile.
-         *
-         * Elevation cost profiles are currently used by following street modes:
-         * - `BIKE`
-         *
-         */
-        elevationCosts?: ElevationCosts;
-        /**
-         * Optional. Default is 25 meters.
-         *
-         * Maximum matching distance in meters to match geo coordinates to the street network.
-         *
-         */
-        maxMatchingDistance?: number;
-        /**
-         * Optional. Default is 15min which is `900`.
-         * - `arriveBy=true`: Maximum time in seconds for the street leg at `one` location.
-         * - `arriveBy=false`: Currently not used
-         *
-         */
-        maxPostTransitTime?: number;
-        /**
-         * Optional. Default is 15min which is `900`.
-         * - `arriveBy=true`: Currently not used
-         * - `arriveBy=false`: Maximum time in seconds for the street leg at `one` location.
-         *
-         */
-        maxPreTransitTime?: number;
-        /**
-         * The maximum number of allowed transfers.
-         * If not provided, the routing uses the server-side default value
-         * which is hardcoded and very high to cover all use cases.
-         *
-         * *Warning*: Use with care. Setting this too low can lead to
-         * optimal (e.g. the fastest) journeys not being found.
-         * If this value is too low to reach the destination at all,
-         * it can lead to slow routing performance.
-         *
-         */
-        maxTransfers?: number;
-        /**
-         * maximum travel time in minutes
-         */
-        maxTravelTime: number;
-        /**
-         * Optional. Default is 0 minutes.
-         *
-         * Minimum transfer time for each transfer in minutes.
-         *
-         */
-        minTransferTime?: number;
-        /**
-         * \`latitude,longitude[,level]\` tuple with
-         * - latitude and longitude in degrees
-         * - (optional) level: the OSM level (default: 0)
-         *
-         * OR
-         *
-         * stop id
-         *
-         */
-        one: string;
-        /**
-         * Optional. Default is `FOOT`.
-         *
-         * Accessibility profile to use for pedestrian routing in transfers
-         * between transit connections and the first and last mile respectively.
-         *
-         */
-        pedestrianProfile?: PedestrianProfile;
-        /**
-         * Optional. Default is `WALK`. The behavior depends on whether `arriveBy` is set:
-         * - `arriveBy=true`: Only applies if the `one` place is a coordinate (not a transit stop).
-         * - `arriveBy=false`: Currently not used
-         *
-         * A list of modes that are allowed to be used from the last transit stop to the `to` coordinate. Example: `WALK,BIKE_SHARING`.
-         *
-         */
-        postTransitModes?: Array<Mode>;
-        /**
-         * Optional. Default is `WALK`. The behavior depends on whether `arriveBy` is set:
-         * - `arriveBy=true`: Currently not used
-         * - `arriveBy=false`: Only applies if the `one` place is a coordinate (not a transit stop).
-         *
-         * A list of modes that are allowed to be used from the last transit stop to the `to` coordinate. Example: `WALK,BIKE_SHARING`.
-         *
-         */
-        preTransitModes?: Array<Mode>;
-        /**
-         * Optional. Default is `false`.
-         *
-         * If set to `true`, all used transit trips are required to allow bike carriage.
-         *
-         */
-        requireBikeTransport?: boolean;
-        /**
-         * Optional. Default is `false`.
-         *
-         * If set to `true`, all used transit trips are required to allow car carriage.
-         *
-         */
-        requireCarTransport?: boolean;
-        /**
-         * Optional. Defaults to the current time.
-         *
-         * Departure time ($arriveBy=false) / arrival date ($arriveBy=true),
-         *
-         */
-        time?: string;
-        /**
-         * Optional. Default is 1.0
-         *
-         * Factor to multiply minimum required transfer times with.
-         * Values smaller than 1.0 are not supported.
-         *
-         */
-        transferTimeFactor?: number;
-        /**
-         * Optional. Default is `TRANSIT` which allows all transit modes (no restriction).
-         * Allowed modes for the transit part. If empty, no transit connections will be computed.
-         * For example, this can be used to allow only `METRO,SUBWAY,TRAM`.
-         *
-         */
-        transitModes?: Array<Mode>;
-        /**
-         * Optional. Default is `false`.
-         *
-         * Whether to use transfers routed on OpenStreetMap data.
-         *
-         */
-        useRoutedTransfers?: boolean;
-    };
+	query: {
+		/**
+		 * Optional. Default is 0 minutes.
+		 *
+		 * Additional transfer time reserved for each transfer in minutes.
+		 *
+		 */
+		additionalTransferTime?: number;
+		/**
+		 * true = all to one,
+		 * false = one to all
+		 *
+		 */
+		arriveBy?: boolean;
+		/**
+		 * Optional. Default is `NONE`.
+		 *
+		 * Set an elevation cost profile, to penalize routes with incline.
+		 * - `NONE`: No additional costs for elevations. This is the default behavior
+		 * - `LOW`: Add a low cost for increase in elevation and incline along the way. This will prefer routes with less ascent, if small detours are required.
+		 * - `HIGH`: Add a high cost for increase in elevation and incline along the way. This will prefer routes with less ascent, if larger detours are required.
+		 *
+		 * As using an elevation costs profile will increase the travel duration,
+		 * routing through steep terrain may exceed the maximal allowed duration,
+		 * causing a location to appear unreachable.
+		 * Increasing the maximum travel time for these segments may resolve this issue.
+		 *
+		 * The profile is used for routing on both the first and last mile.
+		 *
+		 * Elevation cost profiles are currently used by following street modes:
+		 * - `BIKE`
+		 *
+		 */
+		elevationCosts?: ElevationCosts;
+		/**
+		 * Optional. Default is 25 meters.
+		 *
+		 * Maximum matching distance in meters to match geo coordinates to the street network.
+		 *
+		 */
+		maxMatchingDistance?: number;
+		/**
+		 * Optional. Default is 15min which is `900`.
+		 * - `arriveBy=true`: Maximum time in seconds for the street leg at `one` location.
+		 * - `arriveBy=false`: Currently not used
+		 *
+		 */
+		maxPostTransitTime?: number;
+		/**
+		 * Optional. Default is 15min which is `900`.
+		 * - `arriveBy=true`: Currently not used
+		 * - `arriveBy=false`: Maximum time in seconds for the street leg at `one` location.
+		 *
+		 */
+		maxPreTransitTime?: number;
+		/**
+		 * The maximum number of allowed transfers (i.e. interchanges between transit legs,
+		 * pre- and postTransit do not count as transfers).
+		 * `maxTransfers=0` searches for direct transit connections without any transfers.
+		 * If you want to search only for non-transit connections (`FOOT`, `CAR`, etc.),
+		 * send an empty `transitModes` parameter instead.
+		 *
+		 * If not provided, the routing uses the server-side default value
+		 * which is hardcoded and very high to cover all use cases.
+		 *
+		 * *Warning*: Use with care. Setting this too low can lead to
+		 * optimal (e.g. the fastest) journeys not being found.
+		 * If this value is too low to reach the destination at all,
+		 * it can lead to slow routing performance.
+		 *
+		 * In plan endpoints before v3, the behavior is off by one,
+		 * i.e. `maxTransfers=0` only returns non-transit connections.
+		 *
+		 */
+		maxTransfers?: number;
+		/**
+		 * maximum travel time in minutes
+		 */
+		maxTravelTime: number;
+		/**
+		 * Optional. Default is 0 minutes.
+		 *
+		 * Minimum transfer time for each transfer in minutes.
+		 *
+		 */
+		minTransferTime?: number;
+		/**
+		 * \`latitude,longitude[,level]\` tuple with
+		 * - latitude and longitude in degrees
+		 * - (optional) level: the OSM level (default: 0)
+		 *
+		 * OR
+		 *
+		 * stop id
+		 *
+		 */
+		one: string;
+		/**
+		 * Optional. Default is `FOOT`.
+		 *
+		 * Accessibility profile to use for pedestrian routing in transfers
+		 * between transit connections and the first and last mile respectively.
+		 *
+		 */
+		pedestrianProfile?: PedestrianProfile;
+		/**
+		 * Optional. Default is `WALK`. The behavior depends on whether `arriveBy` is set:
+		 * - `arriveBy=true`: Only applies if the `one` place is a coordinate (not a transit stop).
+		 * - `arriveBy=false`: Currently not used
+		 *
+		 * A list of modes that are allowed to be used from the last transit stop to the `to` coordinate. Example: `WALK,BIKE_SHARING`.
+		 *
+		 */
+		postTransitModes?: Array<Mode>;
+		/**
+		 * Optional. Default is `WALK`. The behavior depends on whether `arriveBy` is set:
+		 * - `arriveBy=true`: Currently not used
+		 * - `arriveBy=false`: Only applies if the `one` place is a coordinate (not a transit stop).
+		 *
+		 * A list of modes that are allowed to be used from the last transit stop to the `to` coordinate. Example: `WALK,BIKE_SHARING`.
+		 *
+		 */
+		preTransitModes?: Array<Mode>;
+		/**
+		 * Optional. Default is `false`.
+		 *
+		 * If set to `true`, all used transit trips are required to allow bike carriage.
+		 *
+		 */
+		requireBikeTransport?: boolean;
+		/**
+		 * Optional. Default is `false`.
+		 *
+		 * If set to `true`, all used transit trips are required to allow car carriage.
+		 *
+		 */
+		requireCarTransport?: boolean;
+		/**
+		 * Optional. Defaults to the current time.
+		 *
+		 * Departure time ($arriveBy=false) / arrival date ($arriveBy=true),
+		 *
+		 */
+		time?: string;
+		/**
+		 * Optional. Default is 1.0
+		 *
+		 * Factor to multiply minimum required transfer times with.
+		 * Values smaller than 1.0 are not supported.
+		 *
+		 */
+		transferTimeFactor?: number;
+		/**
+		 * Optional. Default is `TRANSIT` which allows all transit modes (no restriction).
+		 * Allowed modes for the transit part. If empty, no transit connections will be computed.
+		 * For example, this can be used to allow only `METRO,SUBWAY,TRAM`.
+		 *
+		 */
+		transitModes?: Array<Mode>;
+		/**
+		 * Optional. Default is `false`.
+		 *
+		 * Whether to use transfers routed on OpenStreetMap data.
+		 *
+		 */
+		useRoutedTransfers?: boolean;
+	};
 };
-type OneToAllResponse = (Reachable);
+type OneToAllResponse = Reachable;
 type OneToAllError = unknown;
 type ReverseGeocodeData = {
-    query: {
-        /**
-         * latitude, longitude in degrees
-         */
-        place: string;
-        /**
-         * Optional. Default is all types.
-         *
-         * Only return results of the given type.
-         * For example, this can be used to allow only `ADDRESS` and `STOP` results.
-         *
-         */
-        type?: LocationType;
-    };
+	query: {
+		/**
+		 * latitude, longitude in degrees
+		 */
+		place: string;
+		/**
+		 * Optional. Default is all types.
+		 *
+		 * Only return results of the given type.
+		 * For example, this can be used to allow only `ADDRESS` and `STOP` results.
+		 *
+		 */
+		type?: LocationType;
+	};
 };
-type ReverseGeocodeResponse = (Array<Match>);
+type ReverseGeocodeResponse = Array<Match>;
 type ReverseGeocodeError = unknown;
 type GeocodeData = {
-    query: {
-        /**
-         * language tags as used in OpenStreetMap
-         * (usually ISO 639-1, or ISO 639-2 if there's no ISO 639-1)
-         *
-         */
-        language?: string;
-        /**
-         * Optional. Used for biasing results towards the coordinate.
-         *
-         * Format: latitude,longitude in degrees
-         *
-         */
-        place?: string;
-        /**
-         * Optional. Used for biasing results towards the coordinate. Higher number = higher bias.
-         *
-         */
-        placeBias?: number;
-        /**
-         * the (potentially partially typed) address to resolve
-         */
-        text: string;
-        /**
-         * Optional. Default is all types.
-         *
-         * Only return results of the given types.
-         * For example, this can be used to allow only `ADDRESS` and `STOP` results.
-         *
-         */
-        type?: LocationType;
-    };
+	query: {
+		/**
+		 * language tags as used in OpenStreetMap
+		 * (usually ISO 639-1, or ISO 639-2 if there's no ISO 639-1)
+		 *
+		 */
+		language?: string;
+		/**
+		 * Optional. Used for biasing results towards the coordinate.
+		 *
+		 * Format: latitude,longitude in degrees
+		 *
+		 */
+		place?: string;
+		/**
+		 * Optional. Used for biasing results towards the coordinate. Higher number = higher bias.
+		 *
+		 */
+		placeBias?: number;
+		/**
+		 * the (potentially partially typed) address to resolve
+		 */
+		text: string;
+		/**
+		 * Optional. Default is all types.
+		 *
+		 * Only return results of the given types.
+		 * For example, this can be used to allow only `ADDRESS` and `STOP` results.
+		 *
+		 */
+		type?: LocationType;
+	};
 };
-type GeocodeResponse = (Array<Match>);
+type GeocodeResponse = Array<Match>;
 type GeocodeError = unknown;
 type TripData = {
-    query: {
-        /**
-         * trip identifier (e.g. from an itinerary leg or stop event)
-         */
-        tripId: string;
-    };
+	query: {
+		/**
+		 * trip identifier (e.g. from an itinerary leg or stop event)
+		 */
+		tripId: string;
+	};
 };
-type TripResponse = (Itinerary);
+type TripResponse = Itinerary;
 type TripError = unknown;
 type StoptimesData = {
-    query: {
-        /**
-         * Optional. Default is `false`.
-         *
-         * - `arriveBy=true`: the parameters `date` and `time` refer to the arrival time
-         * - `arriveBy=false`: the parameters `date` and `time` refer to the departure time
-         *
-         */
-        arriveBy?: boolean;
-        /**
-         * This parameter will be ignored in case `pageCursor` is set.
-         *
-         * Optional. Default is
-         * - `LATER` for `arriveBy=false`
-         * - `EARLIER` for `arriveBy=true`
-         *
-         * The response will contain the next `n` arrivals / departures
-         * in case `EARLIER` is selected and the previous `n`
-         * arrivals / departures if `LATER` is selected.
-         *
-         */
-        direction?: 'EARLIER' | 'LATER';
-        /**
-         * Optional. Default is all transit modes.
-         *
-         * Only return arrivals/departures of the given modes.
-         *
-         */
-        mode?: Array<Mode>;
-        /**
-         * the number of events
-         */
-        n: number;
-        /**
-         * Use the cursor to go to the next "page" of stop times.
-         * Copy the cursor from the last response and keep the original request as is.
-         * This will enable you to search for stop times in the next or previous time-window.
-         *
-         */
-        pageCursor?: string;
-        /**
-         * Optional. Radius in meters.
-         *
-         * Default is that only stop times of the parent of the stop itself
-         * and all stops with the same name (+ their child stops) are returned.
-         *
-         * If set, all stops at parent stations and their child stops in the specified radius
-         * are returned.
-         *
-         */
-        radius?: number;
-        /**
-         * stop id of the stop to retrieve departures/arrivals for
-         */
-        stopId: string;
-        /**
-         * Optional. Defaults to the current time.
-         *
-         */
-        time?: string;
-    };
+	query: {
+		/**
+		 * Optional. Default is `false`.
+		 *
+		 * - `arriveBy=true`: the parameters `date` and `time` refer to the arrival time
+		 * - `arriveBy=false`: the parameters `date` and `time` refer to the departure time
+		 *
+		 */
+		arriveBy?: boolean;
+		/**
+		 * This parameter will be ignored in case `pageCursor` is set.
+		 *
+		 * Optional. Default is
+		 * - `LATER` for `arriveBy=false`
+		 * - `EARLIER` for `arriveBy=true`
+		 *
+		 * The response will contain the next `n` arrivals / departures
+		 * in case `EARLIER` is selected and the previous `n`
+		 * arrivals / departures if `LATER` is selected.
+		 *
+		 */
+		direction?: 'EARLIER' | 'LATER';
+		/**
+		 * Optional. Default is `false`.
+		 *
+		 * If set to `true`, only stations that are phyiscally in the radius are considered.
+		 * If set to `false`, additionally to the stations in the radius, equivalences with the same name and children are considered.
+		 *
+		 */
+		exactRadius?: boolean;
+		/**
+		 * Optional. Default is all transit modes.
+		 *
+		 * Only return arrivals/departures of the given modes.
+		 *
+		 */
+		mode?: Array<Mode>;
+		/**
+		 * the number of events
+		 */
+		n: number;
+		/**
+		 * Use the cursor to go to the next "page" of stop times.
+		 * Copy the cursor from the last response and keep the original request as is.
+		 * This will enable you to search for stop times in the next or previous time-window.
+		 *
+		 */
+		pageCursor?: string;
+		/**
+		 * Optional. Radius in meters.
+		 *
+		 * Default is that only stop times of the parent of the stop itself
+		 * and all stops with the same name (+ their child stops) are returned.
+		 *
+		 * If set, all stops at parent stations and their child stops in the specified radius
+		 * are returned.
+		 *
+		 */
+		radius?: number;
+		/**
+		 * stop id of the stop to retrieve departures/arrivals for
+		 */
+		stopId: string;
+		/**
+		 * Optional. Defaults to the current time.
+		 *
+		 */
+		time?: string;
+	};
+};
+type StoptimesResponse = {
+	/**
+	 * list of stop times
+	 */
+	stopTimes: Array<StopTime>;
+	/**
+	 * Use the cursor to get the previous page of results. Insert the cursor into the request and post it to get the previous page.
+	 * The previous page is a set of stop times BEFORE the first stop time in the result.
+	 *
+	 */
+	previousPageCursor: string;
+	/**
+	 * Use the cursor to get the next page of results. Insert the cursor into the request and post it to get the next page.
+	 * The next page is a set of stop times AFTER the last stop time in this result.
+	 *
+	 */
+	nextPageCursor: string;
 };
-type StoptimesResponse = ({
-    /**
-     * list of stop times
-     */
-    stopTimes: Array<StopTime>;
-    /**
-     * Use the cursor to get the previous page of results. Insert the cursor into the request and post it to get the previous page.
-     * The previous page is a set of stop times BEFORE the first stop time in the result.
-     *
-     */
-    previousPageCursor: string;
-    /**
-     * Use the cursor to get the next page of results. Insert the cursor into the request and post it to get the next page.
-     * The next page is a set of stop times AFTER the last stop time in this result.
-     *
-     */
-    nextPageCursor: string;
-});
 type StoptimesError = unknown;
 type TripsData = {
-    query: {
-        /**
-         * end if the time window
-         */
-        endTime: string;
-        /**
-         * latitude,longitude pair of the upper left coordinate
-         */
-        max: string;
-        /**
-         * latitude,longitude pair of the lower right coordinate
-         */
-        min: string;
-        /**
-         * start of the time window
-         */
-        startTime: string;
-        /**
-         * current zoom level
-         */
-        zoom: number;
-    };
+	query: {
+		/**
+		 * end if the time window
+		 */
+		endTime: string;
+		/**
+		 * latitude,longitude pair of the upper left coordinate
+		 */
+		max: string;
+		/**
+		 * latitude,longitude pair of the lower right coordinate
+		 */
+		min: string;
+		/**
+		 * start of the time window
+		 */
+		startTime: string;
+		/**
+		 * current zoom level
+		 */
+		zoom: number;
+	};
 };
-type TripsResponse = (Array<TripSegment>);
+type TripsResponse = Array<TripSegment>;
 type TripsError = unknown;
-type InitialResponse = ({
-    /**
-     * latitude
-     */
-    lat: number;
-    /**
-     * longitude
-     */
-    lon: number;
-    /**
-     * zoom level
-     */
-    zoom: number;
-});
+type InitialResponse = {
+	/**
+	 * latitude
+	 */
+	lat: number;
+	/**
+	 * longitude
+	 */
+	lon: number;
+	/**
+	 * zoom level
+	 */
+	zoom: number;
+};
 type InitialError = unknown;
 type StopsData = {
-    query: {
-        /**
-         * latitude,longitude pair of the upper left coordinate
-         */
-        max: string;
-        /**
-         * latitude,longitude pair of the lower right coordinate
-         */
-        min: string;
-    };
+	query: {
+		/**
+		 * latitude,longitude pair of the upper left coordinate
+		 */
+		max: string;
+		/**
+		 * latitude,longitude pair of the lower right coordinate
+		 */
+		min: string;
+	};
 };
-type StopsResponse = (Array<Place>);
+type StopsResponse = Array<Place>;
 type StopsError = unknown;
 type LevelsData = {
-    query: {
-        /**
-         * latitude,longitude pair of the upper left coordinate
-         */
-        max: string;
-        /**
-         * latitude,longitude pair of the lower right coordinate
-         */
-        min: string;
-    };
+	query: {
+		/**
+		 * latitude,longitude pair of the upper left coordinate
+		 */
+		max: string;
+		/**
+		 * latitude,longitude pair of the lower right coordinate
+		 */
+		min: string;
+	};
 };
-type LevelsResponse = (Array<(number)>);
+type LevelsResponse = Array<number>;
 type LevelsError = unknown;
-type FootpathsData = {
-    query: {
-        /**
-         * location id
-         */
-        id: string;
-    };
+type TransfersData = {
+	query: {
+		/**
+		 * location id
+		 */
+		id: string;
+	};
 };
-type FootpathsResponse = ({
-    place: Place;
-    /**
-     * all outgoing footpaths of this location
-     */
-    footpaths: Array<Footpath>;
-});
-type FootpathsError = unknown;
+type TransfersResponse = {
+	place: Place;
+	/**
+	 * true if the server has foot transfers computed
+	 */
+	hasFootTransfers: boolean;
+	/**
+	 * true if the server has wheelchair transfers computed
+	 */
+	hasWheelchairTransfers: boolean;
+	/**
+	 * true if the server has car transfers computed
+	 */
+	hasCarTransfers: boolean;
+	/**
+	 * all outgoing transfers of this location
+	 */
+	transfers: Array<Transfer>;
+};
+type TransfersError = unknown;
 
-export type { Alert, AlertCause, AlertEffect, AlertSeverityLevel, Area, Direction, Duration, ElevationCosts, EncodedPolyline, FareMedia, FareMediaType, FareProduct, FareTransfer, FareTransferRule, Footpath, FootpathsData, FootpathsError, FootpathsResponse, GeocodeData, GeocodeError, GeocodeResponse, InitialError, InitialResponse, Itinerary, Leg, LevelsData, LevelsError, LevelsResponse, LocationType, Match, Mode, OneToAllData, OneToAllError, OneToAllResponse, OneToManyData, OneToManyError, OneToManyResponse, PedestrianProfile, PickupDropoffType, Place, PlanData, PlanError, PlanResponse, Reachable, ReachablePlace, Rental, RentalFormFactor, RentalPropulsionType, RentalReturnConstraint, ReverseGeocodeData, ReverseGeocodeError, ReverseGeocodeResponse, RiderCategory, StepInstruction, StopTime, StopsData, StopsError, StopsResponse, StoptimesData, StoptimesError, StoptimesResponse, TimeRange, Token, TripData, TripError, TripInfo, TripResponse, TripSegment, TripsData, TripsError, TripsResponse, VertexType };
+export type {
+	Alert,
+	AlertCause,
+	AlertEffect,
+	AlertSeverityLevel,
+	Area,
+	Direction,
+	Duration,
+	ElevationCosts,
+	EncodedPolyline,
+	FareMedia,
+	FareMediaType,
+	FareProduct,
+	FareTransfer,
+	FareTransferRule,
+	GeocodeData,
+	GeocodeError,
+	GeocodeResponse,
+	InitialError,
+	InitialResponse,
+	Itinerary,
+	Leg,
+	LevelsData,
+	LevelsError,
+	LevelsResponse,
+	LocationType,
+	Match,
+	Mode,
+	OneToAllData,
+	OneToAllError,
+	OneToAllResponse,
+	OneToManyData,
+	OneToManyError,
+	OneToManyResponse,
+	PedestrianProfile,
+	PickupDropoffType,
+	Place,
+	PlanData,
+	PlanError,
+	PlanResponse,
+	Reachable,
+	ReachablePlace,
+	Rental,
+	RentalFormFactor,
+	RentalPropulsionType,
+	RentalReturnConstraint,
+	ReverseGeocodeData,
+	ReverseGeocodeError,
+	ReverseGeocodeResponse,
+	RiderCategory,
+	StepInstruction,
+	StopTime,
+	StopsData,
+	StopsError,
+	StopsResponse,
+	StoptimesData,
+	StoptimesError,
+	StoptimesResponse,
+	TimeRange,
+	Token,
+	Transfer,
+	TransfersData,
+	TransfersError,
+	TransfersResponse,
+	TripData,
+	TripError,
+	TripInfo,
+	TripResponse,
+	TripSegment,
+	TripsData,
+	TripsError,
+	TripsResponse,
+	VertexType
+};