@mohasinac/appkit 4.40.1 → 4.41.0

package/dist/features/tester/seed-data/authored/content-discovery__coupons.js

@@ -50,28 +50,41 @@ export const authored = {
         expectedUiState: "The applied amount matches the card's stated terms, including any maximum-discount cap the card should also be stating. ARENA25 appears in the applied list with no error.",
         endResult: "Reloading /checkout shows the same coupon and amount. A discrepancy between the card and the applied amount is a copy bug at minimum and a pricing bug at worst.",
     },
+    /*
+     * 🛑 THE EXPIRY IS NOW AUTHORED, 2026-09-15.
+     *
+     * This used to use a coupon seeded past its end date while still flagged
+     * active — the one shape that exercises the DATE check rather than the flag.
+     * That fixture is gone and every permanent coupon has a future end date, so
+     * the admin sets one back by hand. Leaving Active ON is the whole point: a
+     * validator that reads only the flag accepts this coupon, and that is the bug.
+     */
     "checklist-content-discovery-coupons-coupon-expired-rejected": {
-        roles: ["buyer"],
-        startPage: "/checkout",
+        roles: ["admin", "buyer"],
+        startPage: "/admin/coupons",
         steps: [
-            "Sign in as vivaan.kapoor@gmail.com / TempPass123!.",
+            "Sign in as admin@letitrip.in / TempPass123!.",
+            "Open /admin/coupons, open SEALED20 for editing, and write down its end date.",
+            "Set its end date to yesterday and LEAVE the Active toggle ON, then save.",
+            "Sign out and sign in as vivaan.kapoor@gmail.com / TempPass123!.",
             "Add product-beyblade-burst-regalia-genesis (₹1,399) to the cart.",
             "Open /checkout and complete the address and add-ons steps.",
-            "Type TESTEREXPIRED in the coupon field and click 'Apply'.",
+            "Type SEALED20 in the coupon field and click 'Apply'.",
             "Read the exact wording of the rejection.",
+            "Sign back in as admin@letitrip.in and restore the end date written down in step 2.",
         ],
-        inputs: { coupon: "TESTEREXPIRED" },
-        expectedBehaviour: "An expired coupon is refused with a reason that names expiry specifically. TESTEREXPIRED is seeded with an end date a day in the past and isActive still true, so this exercises the date check rather than the active flag — the two are separate reasons and a single generic message cannot tell a buyer which applies.",
-        expectedUiState: "The rejection names expiry, in the shape 'This coupon has expired'. It does not read 'Invalid coupon', which would leave the buyer retyping a code that will never work. TESTEREXPIRED does not enter the applied list.",
+        inputs: { coupon: "SEALED20" },
+        expectedBehaviour: "An expired coupon is refused with a reason that names expiry specifically. With the end date in the past and isActive still true, this exercises the date check rather than the active flag — the two are separate reasons and a single generic message cannot tell a buyer which applies.",
+        expectedUiState: "The rejection names expiry, in the shape 'This coupon has expired'. It does not read 'Invalid coupon', which would leave the buyer retyping a code that will never work. SEALED20 does not enter the applied list.",
         expectedData: { couponApplied: false },
-        endResult: "Reloading /checkout shows TESTEREXPIRED absent.",
+        endResult: "Reloading /checkout shows SEALED20 absent. The end date is restored by the final step — leaving it in the past silently breaks every later coupon case.",
     },
     "checklist-content-discovery-coupons-coupon-below-min-purchase": {
         roles: ["buyer"],
         startPage: "/checkout",
         steps: [
             "Sign in as vivaan.kapoor@gmail.com / TempPass123!.",
-            "Add product-tester-standard-3 (₹99) to the cart and nothing else.",
+            "Add product-beyblade-metal-storm-pegasus (₹99) to the cart and nothing else.",
             "Open /checkout and complete the address and add-ons steps.",
             "Type ARENA25 in the coupon field and click 'Apply'.",
             "Read the exact wording of the rejection and whether it names the required amount.",
@@ -105,15 +118,15 @@ export const authored = {
         startPage: "/checkout",
         steps: [
             "Sign in as vivaan.kapoor@gmail.com / TempPass123!.",
-            "Add product-beyblade-burst-regalia-genesis (₹1,399) to the cart.",
-            "Open /checkout, complete the address and add-ons steps, apply TESTERLIMITED, and place the order with Cash on Delivery.",
-            "Add product-beyblade-metal-storm-pegasus (₹1,299) to the cart.",
-            "Open /checkout, complete the address and add-ons steps, and type TESTERLIMITED in the coupon field.",
+            "Add 2 × product-beyblade-original-dranzer-s (₹1,499 each, ₹2,998 total — above ARENAVIP's ₹2,000 minimum and in an eligible category) to the cart.",
+            "Open /checkout, complete the address and add-ons steps, apply ARENAVIP, and place the order with Cash on Delivery.",
+            "Add 2 × product-beyblade-original-dranzer-s to the cart again.",
+            "Open /checkout, complete the address and add-ons steps, and type ARENAVIP in the coupon field.",
             "Read the rejection.",
-            "Sign out, sign in as rehan.sheikh@gmail.com / TempPass123!, add the same item, and apply TESTERLIMITED at checkout.",
+            "Sign out, sign in as rehan.sheikh@gmail.com / TempPass123!, add the same two items, and apply ARENAVIP at checkout.",
         ],
-        inputs: { coupon: "TESTERLIMITED", perUserLimit: 1 },
-        expectedBehaviour: "TESTERLIMITED allows one use per user and has no global limit, so exhausting it for one buyer must leave it fully usable for the next. Enforcing a per-user limit as if it were global would withdraw the coupon from everybody after a single redemption.",
+        inputs: { coupon: "ARENAVIP", perUserLimit: 1 },
+        expectedBehaviour: "ARENAVIP allows one use per user, and its total limit of 50 has 38 uses left — so exhausting it for one buyer must leave it usable by the next. Enforcing a per-user limit as if it were global would withdraw the coupon from everybody after a single redemption.",
         expectedUiState: "The second attempt by the same buyer is refused with a limit-reached message. The DIFFERENT buyer's attempt is accepted and the coupon appears in their applied list. A refusal for the second buyer means the limit is being read as global.",
         expectedData: { perUserLimit: 1 },
         endResult: "One order carries the discount and a second buyer can still use the code. The cross-account half is the case — the same-account half alone passes under either reading.",

package/dist/features/tester/seed-data/authored/content-discovery__event-detail-subroutes.js

@@ -45,7 +45,7 @@ export const authored = {
         roles: ["buyer"],
         startPage: "/events",
         steps: [
-            "Sign in as the bot buyer claude-tester@letitrip.in / TempPass123!.",
+            "Sign in as the buyer rehan.sheikh@gmail.com / TempPass123!.",
             "Open /events/event-favourite-blader-poll.",
             "Open its Participate tab.",
             "Submit the first available option.",
@@ -62,7 +62,7 @@ export const authored = {
         roles: ["buyer"],
         startPage: "/events",
         steps: [
-            "Sign in as the bot buyer claude-tester@letitrip.in / TempPass123! and open /events/event-favourite-blader-poll.",
+            "Sign in as the buyer rehan.sheikh@gmail.com / TempPass123! and open /events/event-favourite-blader-poll.",
             "Participate once if you have not already.",
             "Reload, and try to participate a second time with a different option.",
             "Read what happens.",
@@ -78,15 +78,15 @@ export const authored = {
         roles: ["guest"],
         startPage: "/events",
         steps: [
-            "Open /events/event-tester-sandbox-top-scorers and open its Leaderboard tab.",
-            "Read the score beside each of the first five rows.",
-            "Check that the scores are in descending order.",
+            "Open /events/event-favourite-blader-poll and open its Leaderboard tab.",
+            "Read the number beside each of the first five rows — the vote or score the row is ranked on.",
+            "Check that those numbers are in descending order.",
             "Read the total entry count the event reports.",
             "Count the rows the leaderboard lists, paging if needed.",
         ],
-        inputs: { eventId: "event-tester-sandbox-top-scorers" },
-        expectedBehaviour: "The leaderboard orders by a stored score and covers the same entries the event counts. A ranking that is merely insertion order looks correct whenever the data happens to arrive sorted, so the descending check has to be explicit.",
-        expectedUiState: "Scores descend down the list, and the number of entries listed matches the count the event reports.",
+        inputs: { eventId: "event-favourite-blader-poll" },
+        expectedBehaviour: "The leaderboard orders by a stored number and covers the same entries the event counts. A ranking that is merely insertion order looks correct whenever the data happens to arrive sorted, so the descending check has to be explicit.",
+        expectedUiState: "The numbers descend down the list, and the number of entries listed matches the count the event reports. A leaderboard showing no number at all beside each row is the failure — there is then nothing it can be ranking by.",
         expectedData: { scoresDescending: true },
         endResult: "Nothing is changed; this case only reads.",
     },
@@ -123,7 +123,7 @@ export const authored = {
         roles: ["buyer"],
         startPage: "/events",
         steps: [
-            "Sign in as the bot buyer claude-tester@letitrip.in / TempPass123!.",
+            "Sign in as the buyer rehan.sheikh@gmail.com / TempPass123!.",
             "Open /events/event-x-launch-raffle-cancelled — a CANCELLED raffle.",
             "Read the event header for its status.",
             "Open the Participate tab.",

package/dist/features/tester/seed-data/authored/content-discovery__events.js

@@ -52,13 +52,13 @@ export const authored = {
         roles: ["guest"],
         startPage: "/events",
         steps: [
-            "Open /events in a private window and find event-tester-sandbox-lottery.",
+            "Open /events in a private window and find event-pokemon-number-draw-july-2026.",
             "Look at its card image.",
             "Open the lottery's detail page.",
             "Look at the image at the top of that page.",
             "Note whether either shows an emoji instead of a photograph.",
         ],
-        inputs: { eventId: "event-tester-sandbox-lottery" },
+        inputs: { eventId: "event-pokemon-number-draw-july-2026" },
         expectedBehaviour: "A lottery renders its stored cover image on both the card and the detail page. The 🎰 emoji is the fallback for an event with no image, and seeing it where one is set means the field is not reaching the renderer.",
         expectedUiState: "Both the card and the detail hero show the cover photograph. Neither shows the 🎰 emoji placeholder.",
         endResult: "Read-only; nothing persists.",
@@ -67,7 +67,7 @@ export const authored = {
         roles: ["guest"],
         startPage: "/events",
         steps: [
-            "Open event-tester-sandbox-lottery's detail page in a private window.",
+            "Open event-pokemon-number-draw-july-2026's detail page in a private window.",
             "Find the 'Prizes' collage above the numbered slot grid.",
             "Count the tiles in the collage.",
             "Count the slots in the numbered grid below it.",
@@ -163,13 +163,13 @@ export const authored = {
         startPage: "/events",
         steps: [
             "Sign in as rehan.sheikh@gmail.com / TempPass123!.",
-            "Open event-tester-sandbox-offer and read the coupon code displayed.",
+            "Open event-buy-3-get-1-beyblades and read the coupon code displayed.",
             "Click the copy control beside it.",
             "Read any confirmation shown.",
             "Open /checkout with an item in the cart and paste into the coupon field.",
             "Read what was pasted and click 'Apply'.",
         ],
-        inputs: { eventId: "event-tester-sandbox-offer" },
+        inputs: { eventId: "event-buy-3-get-1-beyblades" },
         expectedBehaviour: "The code is shown in full and the copy control puts exactly that string on the clipboard. A copy control that copies a truncated or differently-cased value produces a rejection the buyer cannot explain.",
         expectedUiState: "The code is legible in full on the page. Copying shows a confirmation. The pasted value matches the displayed code character for character, and applying it is accepted.",
         endResult: "Remove the coupon afterwards so later checkout cases start from an empty coupon list.",
@@ -191,47 +191,68 @@ export const authored = {
         expectedData: { entriesPerUser: 1 },
         endResult: "The entry survives the reload.",
     },
+    /*
+     * 🛑 THESE TWO CASES CHANGED SHAPE, 2026-09-15.
+     *
+     * They used to open one fixture per raffleType — a `top_n_scorers` event and a
+     * `top_n_participants` one — and compare their leaderboards side by side. Both
+     * fixtures are gone and the permanent seed carries only `open_raffle`, so the
+     * comparison has no second half to make.
+     *
+     * Rather than delete the coverage, each case now AUTHORS the raffle type it is
+     * about, on a real event, and then reads the leaderboard back. That is a
+     * stronger test than the old one — it exercises the admin write path as well as
+     * the render — and it is the only form the current seed can express.
+     */
     "checklist-content-discovery-events-raffle-entry-top-n-scorers": {
-        roles: ["buyer"],
-        startPage: "/events",
+        roles: ["admin", "buyer"],
+        startPage: "/admin/events",
         steps: [
-            "Sign in as rehan.sheikh@gmail.com / TempPass123!.",
-            "Open event-tester-sandbox-top-scorers and read the Overview tab's description of how winners are chosen.",
+            "Sign in as admin@letitrip.in / TempPass123!.",
+            "Open /admin/events, open event-win-burst-regalia-genesis for editing, and write down its current raffle type.",
+            "Set the raffle type to 'Top N scorers', set the N to 3, and save.",
+            "Sign out and sign in as rehan.sheikh@gmail.com / TempPass123!.",
+            "Open /events/event-win-burst-regalia-genesis and read the Overview tab's description of how winners are chosen.",
             "Click the Participate tab and enter.",
             "Click the Leaderboard tab and read how entries are ranked.",
-            "Read whether the ranking is by score and whether the eligible cut-off is stated.",
+            "Read whether the ranking is by score and whether the eligible cut-off of 3 is stated.",
+            "Sign back in as admin@letitrip.in and restore the raffle type written down in step 2.",
         ],
-        inputs: { eventId: "event-tester-sandbox-top-scorers" },
-        expectedBehaviour: "A top-N-scorers raffle draws from the highest-scoring entries, so the leaderboard must rank by score and the page must say how many qualify. Ranking by entry time instead would silently change who can win.",
-        expectedUiState: "The leaderboard is ordered by score, highest first, and the qualifying cut-off is stated. Entering is confirmed. A leaderboard ordered by entry time is the failure.",
-        endResult: "The entry survives a reload.",
+        inputs: { eventId: "event-win-burst-regalia-genesis", raffleTopN: 3 },
+        expectedBehaviour: "A top-N-scorers raffle draws from the highest-scoring entries, so the leaderboard must rank by score and the page must say how many qualify. Ranking by entry time instead would silently change who can win. The saved raffle type must also reach the public page — an admin field that saves and never renders is the commonest shape of this bug.",
+        expectedUiState: "The Overview tab names the top-3-by-score rule after the save. The leaderboard is ordered by score, highest first, and the cut-off is stated. Entering is confirmed. A leaderboard still ordered by entry time is the failure.",
+        endResult: "The entry survives a reload. The raffle type is restored by the final step.",
     },
     "checklist-content-discovery-events-raffle-entry-top-n-participants": {
-        roles: ["buyer"],
-        startPage: "/events",
+        roles: ["admin", "buyer"],
+        startPage: "/admin/events",
         steps: [
-            "Sign in as rehan.sheikh@gmail.com / TempPass123!.",
-            "Open event-tester-sandbox-top-participants and read the Overview tab's description of how winners are chosen.",
+            "Sign in as admin@letitrip.in / TempPass123!.",
+            "Open /admin/events, open event-win-burst-regalia-genesis for editing, and write down its current raffle type.",
+            "Set the raffle type to 'Top N participants', set the N to 3, and save.",
+            "Sign out and sign in as rehan.sheikh@gmail.com / TempPass123!.",
+            "Open /events/event-win-burst-regalia-genesis and read the Overview tab's description of how winners are chosen.",
             "Click the Participate tab and enter.",
             "Click the Leaderboard tab and read how entries are ranked.",
-            "Compare the ranking rule with the one on event-tester-sandbox-top-scorers.",
+            "Compare the stated rule with the top-N-scorers rule from the previous case.",
+            "Sign back in as admin@letitrip.in and restore the raffle type written down in step 2.",
         ],
-        inputs: { eventId: "event-tester-sandbox-top-participants" },
-        expectedBehaviour: "A top-N-participants raffle draws from the earliest or most active participants rather than the highest scorers — a different rule from the scorers variant. The two fixtures exist side by side precisely so the difference is checkable.",
-        expectedUiState: "This event's leaderboard is ordered by its own rule and that rule is stated on the Overview tab. The two raffle types rank differently. Identical ranking on both means the raffle type is not reaching the leaderboard.",
-        endResult: "The entry survives a reload.",
+        inputs: { eventId: "event-win-burst-regalia-genesis", raffleTopN: 3 },
+        expectedBehaviour: "A top-N-participants raffle draws from the earliest or most active participants rather than the highest scorers — a different rule from the scorers variant. Running both against the same event is what makes the difference checkable now that there is no fixture per type.",
+        expectedUiState: "The Overview tab names a participation rule, not a score rule, and the leaderboard is ordered accordingly. Wording identical to the previous case means the raffle type is not reaching the leaderboard.",
+        endResult: "The entry survives a reload. The raffle type is restored by the final step.",
     },
     "checklist-content-discovery-events-spin-wheel": {
         roles: ["buyer"],
         startPage: "/events",
         steps: [
             "Sign in as rehan.sheikh@gmail.com / TempPass123!.",
-            "Open event-tester-sandbox-spin and click the Participate tab.",
+            "Open event-daily-beyblade-pull-wheel and click the Participate tab.",
             "Click the spin control ONCE and watch the wheel.",
             "Read the prize shown and how long it took to appear.",
             "Reload the page and read the Participate tab.",
         ],
-        inputs: { eventId: "event-tester-sandbox-spin" },
+        inputs: { eventId: "event-daily-beyblade-pull-wheel" },
         expectedBehaviour: "The very first spin succeeds and the prize is shown immediately over the realtime channel. A first attempt that fails and a second that works is the signature of a subscription established after the result was already written.",
         expectedUiState: "The wheel spins and lands on a named prize within a few seconds. No 'Spin failed' error appears on the first attempt. After reloading, the result is still shown rather than the wheel offering another free spin.",
         expectedData: { spinsUsed: 1 },
@@ -242,7 +263,7 @@ export const authored = {
         startPage: "/events",
         steps: [
             "Sign in as rehan.sheikh@gmail.com / TempPass123!.",
-            "Open event-tester-sandbox-spin and read the stated maximum spins per user.",
+            "Open event-daily-beyblade-pull-wheel and read the stated maximum spins per user.",
             "Spin until that maximum is reached, reading the remaining count each time.",
             "Attempt one more spin.",
             "Read the refusal.",
@@ -253,25 +274,37 @@ export const authored = {
         expectedData: { spinsAfterReload: 0 },
         endResult: "The exhausted state persists across reloads.",
     },
+    /*
+     * 🛑 THE CLOSED WINDOW IS NOW AUTHORED, NOT WAITED FOR, 2026-09-15.
+     *
+     * This used to sit on a fixture whose spin window was a fraction of the run's
+     * testing window, so a tester could watch it close. That fixture is gone, and
+     * the permanent seed's wheel is open for another three weeks — a duration no
+     * session can outlast. Narrowing the window from the admin editor reaches the
+     * same refusal in a few seconds, and restoring it is one field.
+     */
     "checklist-content-discovery-events-spin-wheel-window-blocked": {
-        roles: ["buyer"],
-        startPage: "/events",
+        roles: ["admin", "buyer"],
+        startPage: "/admin/events",
         steps: [
-            "Sign in as rehan.sheikh@gmail.com / TempPass123!.",
-            "Open event-tester-sandbox-spin and read the stated spin window.",
-            "If the window is currently closed, attempt a spin and read the refusal.",
-            "If it is open, wait for it to close — the window derives from the run's testing window, so shortening that shortens this — then attempt a spin.",
+            "Sign in as admin@letitrip.in / TempPass123!.",
+            "Open /admin/events, open event-daily-beyblade-pull-wheel for editing, and write down its current spin window start and end.",
+            "Set the spin window end to yesterday's date so the window is closed, and save.",
+            "Sign out and sign in as rehan.sheikh@gmail.com / TempPass123!.",
+            "Open /events/event-daily-beyblade-pull-wheel, read the stated spin window, and attempt a spin.",
             "Read the refusal and check it names the window rather than a generic failure.",
+            "Sign back in as admin@letitrip.in and restore the two dates written down in step 2.",
         ],
-        expectedBehaviour: "Spins outside the configured window are refused with a reason naming the window. The window is expressed as a fraction of the run's testing window rather than a baked duration, which is what makes 'wait for it to close' possible inside a session at all.",
-        expectedUiState: "Outside the window the spin control is refused and the message names the window or its times. It is not a generic 'Spin failed', which would be indistinguishable from the realtime failure above.",
-        endResult: "No spin is recorded outside the window. If the window cannot be reached within the session, answer null rather than guessing.",
+        inputs: { eventId: "event-daily-beyblade-pull-wheel" },
+        expectedBehaviour: "Spins outside the configured window are refused with a reason naming the window, and the check runs server-side — a window enforced only by hiding the button is no window at all.",
+        expectedUiState: "With the window closed the spin control is refused and the message names the window or its times. It is not a generic 'Spin failed', which would be indistinguishable from the realtime failure above.",
+        endResult: "No spin is recorded outside the window. The original window is restored by the final step; if the restore fails, say so rather than leaving the wheel closed for later cases.",
     },
     "checklist-content-discovery-events-spin-results-tab": {
         roles: ["guest"],
         startPage: "/events",
         steps: [
-            "Open event-tester-sandbox-spin in a private window with no session.",
+            "Open event-daily-beyblade-pull-wheel in a private window with no session.",
             "Find the 'Last 10 Spin Results' tab and open it.",
             "Read every row — the name shown and the prize.",
             "Count the rows.",

package/dist/features/tester/seed-data/authored/content-discovery__notifications.js

@@ -26,7 +26,7 @@ export const authored = {
             "Sign in as rehan.sheikh@gmail.com / TempPass123!.",
             "Open /user/notifications and read the unread count on the header bell.",
             "In a second window, sign in as vivaan.kapoor@gmail.com / TempPass123!.",
-            "As that second buyer, open /auctions/auction-tester-sandbox-cycle-1 and place a bid high enough to outbid the first buyer.",
+            "As that second buyer, open /auctions/auction-beyblade-original-dragoon-storm and place a bid high enough to outbid the first buyer.",
             "Return to the first window and open /user/notifications.",
             "Read the newest entry and the bell's unread count.",
         ],

package/dist/features/tester/seed-data/authored/cta-layout__checkout-bottom-bar.js

@@ -25,7 +25,7 @@ export const authored = {
         steps: [
             "Resize the browser window to 320 pixels wide.",
             "Sign in as rehan.sheikh@gmail.com / TempPass123!.",
-            "Open /products/product-tester-standard-1 and click 'Add to Cart'.",
+            "Open /products/product-beyblade-burst-valkyrie and click 'Add to Cart'.",
             "Open /checkout, select the first saved address, and continue to the Extras step.",
             "Read the two buttons in the bottom action bar and compare their widths.",
         ],
@@ -40,7 +40,7 @@ export const authored = {
         steps: [
             "Resize the browser window to 320 pixels wide.",
             "Sign in as rehan.sheikh@gmail.com / TempPass123!.",
-            "Open /products/product-tester-standard-1 and click 'Add to Cart'.",
+            "Open /products/product-beyblade-burst-valkyrie and click 'Add to Cart'.",
             "Open /checkout and continue through to the payment step.",
             "Read the primary button's label in full.",
             "Select each payment method in turn and read the primary label after each.",

package/dist/features/tester/seed-data/authored/design-ux__back-to-top-button.js

@@ -79,10 +79,10 @@ export const authored = {
     },
     "checklist-design-ux-back-to-top-button-not-covering-toast-or-modal-actions": {
         roles: ["buyer"],
-        startPage: "/products/product-tester-standard-1",
+        startPage: "/products/product-beyblade-burst-valkyrie",
         steps: [
             "Sign in as rehan.sheikh@gmail.com / TempPass123!.",
-            "Open /products/product-tester-standard-1 and scroll past 400 pixels so the control appears.",
+            "Open /products/product-beyblade-burst-valkyrie and scroll past 400 pixels so the control appears.",
             "Click 'Add to Cart' and watch for a toast.",
             "Look at whether the control overlaps the toast or any control inside it.",
             "Open any modal on the page and look at its footer buttons.",

package/dist/features/tester/seed-data/authored/design-ux__general-design.js

@@ -148,7 +148,7 @@ export const authored = {
             "Click a thumbnail and check the main image changes.",
             "Open a product page that has reviews with photos and look at the 'Photos' grid.",
             "Open the review lightbox and look at its thumbnail strip.",
-            "Open /bundles/bundle-tester-sandbox and look at its member collage.",
+            "Open /bundles/bundle-original-collectors-set and look at its member collage.",
         ],
         expectedBehaviour: "An image inside a button renders at its intended size. A fill-style image resolves its percentages against its parent, so a shrink-to-fit wrapper between the button and the image collapses both to nothing — the tile becomes an empty bordered square while the button still looks and clicks correctly.",
         expectedUiState: "Every clickable image tile shows its picture at the same size as its neighbours, on all four surfaces. An empty bordered square where a photo should be is the failure, and it is the same failure on each of them.",

package/dist/features/tester/seed-data/authored/design-ux__status-badge-legibility.js

@@ -60,7 +60,7 @@ export const authored = {
             "Look at its badge and check whether it has a filled background at all.",
             "Compare it against the Classified and Digital Code badges beside it, then against the Auction badge on /auctions.",
             "Switch to dark mode and look again.",
-            "Open /live/live-tester-sandbox-1 signed in as tester@letitrip.in / TempPass123! and look at the badge there.",
+            "Open /live/live-golden-retriever-puppy and look at the badge on the detail page too.",
         ],
         expectedBehaviour: "The Live Item badge names a colour the build can actually generate. Its background once used a flat alias that has no tint variant and is absent from the app's own palette entirely, so the class compiled to nothing and the badge rendered with no fill — which reads as a deliberate outline style rather than a dropped class.",
         expectedUiState: "The Live Item badge has a visible filled background in both themes, like every other type badge. A badge that is text-only while its neighbours are filled is the failure.",

package/dist/features/tester/seed-data/authored/design-ux__sticky-cta-bar.js

@@ -68,16 +68,16 @@ export const authored = {
     },
     "checklist-design-ux-sticky-cta-bar-desktop-buttons-work": {
         roles: ["buyer"],
-        startPage: "/products/product-tester-standard-1",
+        startPage: "/products/product-beyblade-burst-valkyrie",
         steps: [
             "Sign in as rehan.sheikh@gmail.com / TempPass123!.",
-            "Open /products/product-tester-standard-1 at 1280 pixels wide and scroll until the sticky bar appears.",
+            "Open /products/product-beyblade-burst-valkyrie at 1280 pixels wide and scroll until the sticky bar appears.",
             "Click 'Add to Cart' in the STICKY BAR, not in the page panel.",
             "Watch the label while the request runs.",
             "Open /cart and read what is in it.",
             "Go back, scroll to the bar again, and click the wishlist control in the bar.",
         ],
-        inputs: { productId: "product-tester-standard-1", quantity: 1 },
+        inputs: { productId: "product-beyblade-burst-valkyrie", quantity: 1 },
         expectedBehaviour: "The bar's controls are the real controls, not decorative copies — each performs the same action as its counterpart in the page panel and reflects its own loading state.",
         expectedUiState: "The label changes while the request runs and the cart badge increases. /cart holds 'Test Gadget — Standard Listing #1'. The wishlist control in the bar also acts rather than doing nothing.",
         endResult: "Empty the cart and the wishlist afterwards so later cases start clean.",

package/dist/features/tester/seed-data/authored/index.js

@@ -50,7 +50,6 @@ import { authored as a_cta_layout__navbar_ctas } from "./cta-layout__navbar-ctas
 import { authored as a_public_pages__help_scams_guides_subpages } from "./public-pages__help-scams-guides-subpages";
 import { authored as a_account_auth__profile_settings } from "./account-auth__profile-settings";
 import { authored as a_account_auth__signup_login } from "./account-auth__signup-login";
-import { authored as a_account_auth__testing_program } from "./account-auth__testing-program";
 import { authored as a_addresses__address_filters } from "./addresses__address-filters";
 import { authored as a_addresses__postal_lookup } from "./addresses__postal-lookup";
 import { authored as a_addresses__postal_validation } from "./addresses__postal-validation";
@@ -171,7 +170,6 @@ export const AUTHORED_CASES = {
     ...a_public_pages__help_scams_guides_subpages,
     ...a_account_auth__profile_settings,
     ...a_account_auth__signup_login,
-    ...a_account_auth__testing_program,
     ...a_addresses__address_filters,
     ...a_addresses__postal_lookup,
     ...a_addresses__postal_validation,

package/dist/features/tester/seed-data/authored/page-wiring__data-loss.js

@@ -23,7 +23,7 @@ export const authored = {
         roles: ["buyer", "admin"],
         startPage: "/admin/lotteries",
         steps: [
-            "Sign in as rehan.sheikh@gmail.com / TempPass123! and open the lottery event event-tester-sandbox-lottery.",
+            "Sign in as rehan.sheikh@gmail.com / TempPass123! and open the lottery event event-pokemon-number-draw-july-2026.",
             "Pull slot number 3 and complete the purchase.",
             "Read the slot grid and note that slot 3 now shows as booked, with the buyer name and lottery number against it.",
             "Sign out and sign in as admin@letitrip.in / TempPass123!.",
@@ -44,7 +44,7 @@ export const authored = {
         startPage: "/admin/lotteries",
         steps: [
             "Sign in as admin@letitrip.in / TempPass123!.",
-            "Open /admin/lotteries and open the editor for event-tester-sandbox-lottery.",
+            "Open /admin/lotteries and open the editor for event-pokemon-number-draw-july-2026.",
             "Find the slot that has already been pulled, slot number 3.",
             "Remove that slot from the list.",
             "Save.",

package/dist/features/tester/seed-data/authored/page-wiring__reachability.js

@@ -96,20 +96,22 @@ export const authored = {
         endResult: "Read-only; nothing persists. Record every broken href in the comment, not just the first — one report naming all of them is worth more than a verdict.",
     },
     "checklist-page-wiring-reachability-user-tester-hub-reachable-from-user-sidebar": {
-        roles: ["buyer"],
+        roles: ["admin", "buyer"],
         startPage: "/user",
         steps: [
-            "Sign in as tester@letitrip.in / TempPass123!, which carries the tester flag.",
+            "Sign in as admin@letitrip.in / TempPass123!, open /admin/users, and turn the tester flag ON for vivaan.kapoor@gmail.com — no seeded account carries it, so the case sets up the flag it is about.",
+            "Sign out and sign in as vivaan.kapoor@gmail.com / TempPass123!, which now carries the tester flag.",
             "Open /user and read the sidebar.",
             "Find the Testing group and click Tester Hub.",
             "Read where it lands.",
             "Sign out and sign in as rehan.sheikh@gmail.com / TempPass123!, which does not carry the flag.",
             "Open /user and read the sidebar for a Testing group.",
+            "Sign back in as admin@letitrip.in and turn the tester flag on vivaan.kapoor@gmail.com back off.",
         ],
-        inputs: { testerAccount: "tester@letitrip.in", nonTesterAccount: "rehan.sheikh@gmail.com" },
+        inputs: { testerAccount: "vivaan.kapoor@gmail.com", nonTesterAccount: "rehan.sheikh@gmail.com" },
         expectedBehaviour: "The Testing group is injected at runtime for accounts carrying the tester flag and is empty for everyone else. An empty group must not render as a heading with nothing under it.",
         expectedUiState: "The tester sees a Testing group containing Tester Hub, and clicking it opens /user/tester with the checklist. The non-tester sees no Testing group at all — not a heading with no children, and not a link that leads to a 'Testers only' warning.",
         expectedData: { testingGroupVisibleForNonTester: false },
-        endResult: "Read-only; nothing persists. Checking both accounts is the case — a group that renders for everybody would pass the first half alone.",
+        endResult: "The flag is revoked by the final step, leaving vivaan.kapoor@gmail.com on its seeded settings. Checking both accounts is the case — a group that renders for everybody would pass the first half alone.",
     },
 };

package/dist/features/tester/seed-data/authored/public-pages__auth-error-pages.js

@@ -96,13 +96,13 @@ export const authored = {
         startPage: "/checkout",
         steps: [
             "Sign in as rehan.sheikh@gmail.com / TempPass123!.",
-            "Open /products/product-tester-standard-1 and click 'Add to Cart'.",
+            "Open /products/product-beyblade-burst-valkyrie and click 'Add to Cart'.",
             "Open /checkout, select the first saved address, continue through the add-ons step, choose Cash on Delivery and place the order.",
             "Read the success page for an order number, the item, the address and the total.",
             "Copy the URL and reload it.",
             "Open the same URL in a private window with no session.",
         ],
-        inputs: { productId: "product-tester-standard-1", price: 199, paymentMethod: "Cash on Delivery" },
+        inputs: { productId: "product-beyblade-burst-valkyrie", price: 199, paymentMethod: "Cash on Delivery" },
         expectedBehaviour: "The success page reads the real order rather than whatever the checkout had in memory, so it survives a reload. It is also order-scoped data, so a signed-out visitor with the URL must not be shown someone's delivery address.",
         expectedUiState: "The page names an order number, 'Test Gadget — Standard Listing #1' at ₹199.00, the delivery address and a total. After the reload it shows the same. In the private window it does not render the order details — it asks for sign-in or reports not-found.",
         expectedData: { orderTotal: 199 },

package/dist/features/tester/seed-data/authored/public-pages__core-listing-pages.js

@@ -160,7 +160,7 @@ export const authored = {
         steps: [
             "Open /bundles in a private window with no session.",
             "Read each bundle card's price and its discount badge.",
-            "Open bundle-tester-sandbox and read its price and its members.",
+            "Open bundle-original-collectors-set and read its price and its members.",
             "Add up the members' individual prices and compare with the bundle price.",
             "Read the page for anything containing 'Tester' or 'Test' while signed out.",
         ],

package/dist/features/tester/seed-data/authored/public-pages__stores-sellers-directories.js

@@ -94,12 +94,11 @@ export const authored = {
     },
     "checklist-public-pages-stores-sellers-directories-empty-tabs-hidden": {
         roles: ["guest"],
-        startPage: "/stores/store-tester-qa-seller",
+        startPage: "/stores/store-beyblade-arena",
         steps: [
-            "Sign in as tester@letitrip.in / TempPass123! so sandbox content is visible.",
-            "Open /stores/store-tester-qa-seller and write down every tab offered.",
+            "Open /stores/store-beyblade-arena in a private window and write down every tab offered.",
             "Open each tab and note which are empty.",
-            "Open /stores/store-beyblade-arena and write down its tabs.",
+            "Open /stores/store-letitrip-official — a store whose whole catalogue is prize draws — and write down its tabs.",
             "Compare the two stores' tab lists.",
         ],
         expectedBehaviour: "A tab is hidden when its count is genuinely zero, and shown when the count could not be computed. That distinction is the whole rule: a count map that does not cover an option returns undefined, which reads as unknown and keeps the tab — so an uncovered option is structurally unhideable while a covered one vanishes correctly.",
@@ -209,17 +208,16 @@ export const authored = {
     },
     "checklist-public-pages-stores-sellers-directories-seller-detail-page": {
         roles: ["guest"],
-        startPage: "/stores/store-tester-qa-seller",
+        startPage: "/stores/store-beyblade-arena",
         steps: [
-            "Sign in as tester@letitrip.in / TempPass123! so sandbox content is visible.",
-            "Open /stores/store-tester-qa-seller.",
+            "Open /stores/store-beyblade-arena in a private window.",
             "Read the header, the tabs and the listings.",
             "Open the store's own listing-type dropdown, if it offers one, and select each option in turn.",
             "Note any option that returns nothing.",
         ],
-        inputs: { storeId: "store-tester-qa-seller" },
-        expectedBehaviour: "This store backs the tester programme and carries at least one fixture of every listing type — the art and stickers pair were added specifically so the type dropdown has real data on every option rather than several that silently return nothing.",
-        expectedUiState: "The page renders with its header and tabs. Every option in the listing-type dropdown returns at least one item. An option that returns nothing means either the fixture is missing or that type is being dropped from the query.",
+        inputs: { storeId: "store-beyblade-arena" },
+        expectedBehaviour: "This store carries standard products, auctions, pre-orders, classifieds, digital codes, live items, art and stickers — every type except prize draws, which all belong to store-letitrip-official. So the dropdown must offer the eight it has and not the one it does not: an option for an absent type silently returns nothing, which reads as a broken query rather than an empty catalogue.",
+        expectedUiState: "The page renders with its header and tabs. Every option the listing-type dropdown offers returns at least one item, and Prize Draws is not offered. An offered option that returns nothing means either the type is absent from this store or it is being dropped from the query.",
         expectedData: { emptyTypeOptionCount: 0 },
         endResult: "Read-only; nothing persists.",
     },

package/dist/features/tester/seed-data/authored/selling__become-seller.js

@@ -55,7 +55,7 @@ export const authored = {
         roles: ["seller"],
         startPage: "/store",
         steps: [
-            "Sign in as tester@letitrip.in / TempPass123!, whose tester flag auto-approves their store.",
+            "Sign in as tyson@beybladearena.in / TempPass123!, whose store-beyblade-arena is approved and public.",
             "Open /store and read the dashboard.",
             "Open the store's own settings and read its name, description, logo and banner.",
             "Change the description to 'QA Store store-setup description' and save.",
@@ -64,7 +64,7 @@ export const authored = {
             "Restore the original description.",
         ],
         inputs: { description: "QA Store store-setup description" },
-        expectedBehaviour: "A tester's store is approved on both documents at once — the user record's status AND the store's own status and public flag. Flipping only the user's leaves the seller with a working dashboard and a store invisible to the public, because every visibility check reads the store's own status.",
+        expectedBehaviour: "An approved store is approved on both documents at once — the user record's status AND the store's own status and public flag. Flipping only the user's leaves the seller with a working dashboard and a store invisible to the public, because every visibility check reads the store's own status. That is why this case reads the PUBLIC page and not only the dashboard.",
         expectedUiState: "The dashboard loads rather than showing a pending-approval gate. The edited description survives the reload AND appears on the public store page. A description that saves in the dashboard but never reaches the public page means the store is not actually public.",
         endResult: "The description is restored by the final step. The public page rendering at all is the real assertion here.",
     },

package/dist/features/tester/seed-data/authored/selling__digital-content-delivery.js

@@ -58,7 +58,7 @@ export const authored = {
         roles: ["buyer"],
         startPage: "/digital-codes",
         steps: [
-            "Sign in as the bot buyer claude-tester@letitrip.in / TempPass123!.",
+            "Sign in as the buyer rehan.sheikh@gmail.com / TempPass123!.",
             "Open /digital-codes and open a listing that shows codes available.",
             "Add it to the cart and complete checkout.",
             "Open /user/digital-codes.",
@@ -75,7 +75,7 @@ export const authored = {
         startPage: "/digital-codes",
         steps: [
             "Open a digital-code listing's public page and write down the codes-available number it shows.",
-            "Sign in as the bot buyer claude-tester@letitrip.in / TempPass123! and buy that listing.",
+            "Sign in as the buyer rehan.sheikh@gmail.com / TempPass123! and buy that listing.",
             "Reload the listing's public page and read the number again.",
         ],
         expectedBehaviour: "The counter is derived from the pool, so a claim reduces it. A counter a human typed into the seller form and that nothing recomputes will sit at its original value forever — which lets a sold-out listing keep advertising stock, because the availability predicate reads exactly that field.",

package/dist/features/tester/seed-data/authored/selling__listing-a-product.js

@@ -107,8 +107,8 @@ export const authored = {
             "Open its public page and read the seller line at the bottom of the info panel.",
             "Click the 'Visit Store' link and read where it lands.",
             "Open /stores/store-beyblade-arena and find the listing in the Products tab.",
-            "Sign out and sign in as tester@letitrip.in / TempPass123!, a different seller.",
-            "Open that seller's own products list and check the listing is NOT there.",
+            "Sign out and sign in as admin@letitrip.in / TempPass123!, a different seller who owns store-letitrip-official.",
+            "Open /store/products — that seller's own products list — and check the listing is NOT there.",
             "Sign back in as tyson and delete the listing.",
         ],
         inputs: { title: "QA Product belongs-to-store", price: 300 },