@modootoday/datalab-extension-mcp 1.9.1 → 1.9.2

package/README.en.md

@@ -6,7 +6,7 @@ A small free program that connects an AI app like Claude to DataLab Tools. Once
 
 > "How did my blog do last week?"
 
-and it answers with the **real numbers** from your Naver blog, keywords, and ads — not guesses. **Lookups just work; editing is asked for** — changing your draft or an editor needs a separate allow, and it never publishes. A first-timer is usually done in about 10 minutes.
+and it answers with the **real numbers** from your Naver blog, keywords, and ads — not guesses. **Lookups just work; editing is asked for** — changing your draft or an editor is confirmed every time, and it never publishes. A first-timer is usually done in about 10 minutes.
 
 > The extension UI and the setup helper speak Korean; this page mirrors the Korean README ([한국어](./README.md)) for reference. The exact sentences you'll see on screen are shown in Korean below, with an English gloss.
 
@@ -61,7 +61,7 @@ One command finds **every** AI app on your computer and connects them automatica
 2. **Paste this command and press Enter.** The saved command names an exact bootstrap version. At startup and while idle, the connector checks the canonical release and promotes itself to the current secure, compatible version. Diagnostic environments can opt out with `--no-self-update`.
 
    ```
-   npx -y @modootoday/datalab-extension-mcp@1.9.1 install
+   npx -y @modootoday/datalab-extension-mcp@1.9.2 install
    ```
 
    Lines of English scrolling by is normal. This only downloads and runs the connector — it touches nothing else.
@@ -148,10 +148,10 @@ The connection itself lives only while the side panel is open.
 Installing also places the bundled **writing skills**. An AI app reads the name and description of every installed skill on every start, so the more are installed the less room the conversation has. The default therefore places only the ones that work right away.
 
 ```
-npx -y @modootoday/datalab-extension-mcp@1.9.1 skills list
-npx -y @modootoday/datalab-extension-mcp@1.9.1 skills status
-npx -y @modootoday/datalab-extension-mcp@1.9.1 skills attach <name>
-npx -y @modootoday/datalab-extension-mcp@1.9.1 skills detach <name>
+npx -y @modootoday/datalab-extension-mcp@1.9.2 skills list
+npx -y @modootoday/datalab-extension-mcp@1.9.2 skills status
+npx -y @modootoday/datalab-extension-mcp@1.9.2 skills attach <name>
+npx -y @modootoday/datalab-extension-mcp@1.9.2 skills detach <name>
 ```
 
 - `list` shows everything in this version, name and description.
@@ -268,7 +268,7 @@ Start it again after a full quit and it picks the tools up. If they still aren't
 - **When the connection disappears** — run the very command you used at the start once more; it safely re-registers. (Some AI apps clean up their settings file and drop the connection.)
 
   ```
-  npx -y @modootoday/datalab-extension-mcp@1.9.1 install
+  npx -y @modootoday/datalab-extension-mcp@1.9.2 install
   ```
 
 - **`'npx' is not recognized...`** — Node.js isn't installed. The "No Node.js?" one-liner in Step 2 is the simplest fix.
@@ -285,7 +285,7 @@ Start it again after a full quit and it picks the tools up. If they still aren't
 
 ## Safety
 
-- **Lookups just work; editing is asked for.** Looking data up is immediate. Changing your **Naver draft** or a photo/video editor needs **AI editing** allowed, in the side panel or in settings, and you pick how long that lasts: allow it for this connection and closing the panel turns it back off, or save **always allow** so you don't switch it on again (turned off in the same place). In the draft, that covers setting the title, inserting text, and undo. Replacing the whole body, inserting a photo, closing an editor window, and deleting anything are **not covered by "always allow"** — that setting does not open them. Anything that costs money is opened by no setting at all and is asked about **every single time**.
+- **Lookups just work; editing is asked for, every time.** Looking data up is immediate. Changing your **Naver draft** or a photo/video editor — setting the title, inserting text, undo, replacing the whole body, inserting a photo, closing an editor window, deleting anything — is confirmed in the side panel before it runs. So is anything that costs money. **There is no setting that approves these in advance.** Publishing and ad spend are opened by nothing at all.
 - **It never publishes.** Posting or making a draft public is not connected — edits stay in the draft window, and publishing is yours to do.
 - **The connector stores no logins, passwords, or cookies.** It never contacts Naver directly. Every lookup happens inside your own logged-in browser.
 - **It works only inside your computer.** Nothing outside can connect, and browser sessions use separate registered credentials plus extension identity checks.
@@ -298,7 +298,7 @@ Start it again after a full quit and it picks the tools up. If they still aren't
 1. Run this in a terminal (it removes the entries registered in your AI apps).
 
    ```
-   npx -y @modootoday/datalab-extension-mcp@1.9.1 uninstall
+   npx -y @modootoday/datalab-extension-mcp@1.9.2 uninstall
    ```
 
 2. Turn **MCP 연결** off in the extension settings. The panel is the bridge, so with it off a leftover config line can look nothing up.

package/README.md

@@ -55,7 +55,7 @@ Claude 같은 AI 앱을 데이터랩툴즈에 연결해 주는 작은 무료 프
 2. **아래 명령을 붙여넣고 Enter를 눌러요.** 저장되는 명령은 정확한 시작 버전을 적습니다. 연결 프로그램은 시작할 때와 유휴 상태에서 정본 릴리스를 확인해 현재의 안전하고 호환되는 버전으로 승격합니다. 진단 환경에서는 `--no-self-update`로 승격을 끌 수 있어요.
 
    ```
-   npx -y @modootoday/datalab-extension-mcp@1.9.1 install
+   npx -y @modootoday/datalab-extension-mcp@1.9.2 install
    ```
 
    영어 글자가 여러 줄 올라오는 건 정상이에요. 이 명령은 연결 프로그램을 다운로드해 실행할 뿐, 다른 건 건드리지 않아요.
@@ -134,10 +134,10 @@ Claude 같은 AI 앱을 데이터랩툴즈에 연결해 주는 작은 무료 프
 설치할 때 **글쓰기 도움말(스킬)** 도 함께 놓입니다. AI 앱은 켜질 때마다 설치된 도움말의 이름과 설명을 전부 읽기 때문에, 많이 깔수록 대화에 쓸 자리가 줄어들어요. 그래서 기본은 **바로 쓸 수 있는 것만** 놓습니다.
 
 ```
-npx -y @modootoday/datalab-extension-mcp@1.9.1 skills list
-npx -y @modootoday/datalab-extension-mcp@1.9.1 skills status
-npx -y @modootoday/datalab-extension-mcp@1.9.1 skills attach <이름>
-npx -y @modootoday/datalab-extension-mcp@1.9.1 skills detach <이름>
+npx -y @modootoday/datalab-extension-mcp@1.9.2 skills list
+npx -y @modootoday/datalab-extension-mcp@1.9.2 skills status
+npx -y @modootoday/datalab-extension-mcp@1.9.2 skills attach <이름>
+npx -y @modootoday/datalab-extension-mcp@1.9.2 skills detach <이름>
 ```
 
 - `list` 는 이 버전에 들어 있는 전부를 이름과 설명으로 보여 줘요.
@@ -236,7 +236,7 @@ AI가 "그런 기능은 없다" 고 답하면, **"도구 목록을 확인해 보
 - **연결이 사라졌을 때** — 처음 실행했던 그 명령을 한 번 더 실행하면 안전하게 다시 등록돼요. (일부 AI 앱이 설정 파일을 정리하며 연결을 지우기도 해요.)
 
   ```
-  npx -y @modootoday/datalab-extension-mcp@1.9.1 install
+  npx -y @modootoday/datalab-extension-mcp@1.9.2 install
   ```
 
 - **`'npx'을(는) 내부 또는 외부 명령...`** — Node.js가 없는 거예요. 위 2단계의 "Node.js가 없다면" 한 줄 설치가 가장 간단해요.
@@ -253,7 +253,7 @@ AI가 "그런 기능은 없다" 고 답하면, **"도구 목록을 확인해 보
 
 ## 안전
 
-- **조회는 그냥 되고, 고치는 건 허락받아요.** 데이터 조회는 바로 돼요. **네이버 글쓰기 창**과 사진·영상 편집기의 내용을 고치려면 사이드패널이나 설정에서 **AI 편집 허용**을 켜야 해요. 두 가지 중에 고르면 됩니다 — 이번 연결에만 켜면 패널을 닫을 때 다시 꺼지고, **항상 허용**으로 저장하면 매번 켜지 않아도 돼요(끄는 것도 같은 자리에서 합니다). 글쓰기 창에서는 제목·본문 넣기와 되돌리기가 열려요. 본문을 통째로 바꾸거나 사진을 넣는 것, 편집기 창을 닫는 것, 지우기는 **항상 허용에 포함되지 않아요** — 그 설정으로는 열리지 않습니다. 요금이 드는 기능은 어떤 설정으로도 열리지 않고, 실행 전에 **매번** 물어봐요.
+- **조회는 그냥 되고, 고치는 건 그때그때 허락받아요.** 데이터 조회는 바로 돼요. **네이버 글쓰기 창**과 사진·영상 편집기의 내용을 고치는 것 — 제목·본문 넣기, 되돌리기, 본문을 통째로 바꾸기, 사진 넣기, 편집기 창 닫기, 지우기 — 은 실행 전에 **할 때마다** 사이드패널에서 물어봐요. 요금이 드는 기능도 같습니다. **미리 켜 두는 설정은 없어요.** 글 발행과 광고비 집행은 어떤 경우에도 열리지 않아요.
 - **발행은 하지 않아요.** 글을 올리거나 공개하는 기능은 연결되지 않습니다 — 고친 내용은 글쓰기 창에 남고, 올릴지는 사용자가 직접 정해요.
 - **아이디·비밀번호·쿠키를 저장하지 않아요.** 네이버에 직접 접속하지도 않아요. 모든 조회는 내가 로그인해 둔 내 브라우저 안에서 일어나요.
 - **내 컴퓨터 안에서만 동작해요.** 밖에서는 접속할 수 없고, 연결 키와 확장 확인이라는 이중 잠금이 걸려 있어요.
@@ -266,7 +266,7 @@ AI가 "그런 기능은 없다" 고 답하면, **"도구 목록을 확인해 보
 1. 터미널에서 아래 명령을 실행해요(AI 앱에 등록된 설정을 지워 줘요).
 
    ```
-   npx -y @modootoday/datalab-extension-mcp@1.9.1 uninstall
+   npx -y @modootoday/datalab-extension-mcp@1.9.2 uninstall
    ```
 
 2. 확장 설정에서 **MCP 연결을 꺼요.** 패널이 브릿지라, 꺼 두면 어딘가 설정 줄이 남아 있어도 AI 앱이 아무것도 조회할 수 없어요.

package/dist/{chunk-NRRASSG3.js → chunk-M6GZ27IE.js}

@@ -2,7 +2,7 @@ import {
   __export
 } from "./chunk-MLKGABMK.js";
 
-// ../mcp-server/dist/chunk-TPCD4SYG.js
+// ../mcp-server/dist/chunk-LRBGSE6T.js
 import { createHash } from "crypto";
 import { createHash as createHash2, randomUUID } from "crypto";
 import { mkdir, readFile, readdir, rm, writeFile } from "fs/promises";
@@ -14895,8 +14895,7 @@ var TOOL_TIERS = Object.freeze({
   // ── Gallery: the free way in ────────────────────────────────────
   //
   // Destructive because it reads a path off the user's disk, the same
-  // capability editor_insert_image carries. A session toggle would open the
-  // whole filesystem once and stay open.
+  // capability editor_insert_image carries, and the confirm names that read.
   gallery_image_add: "destructive",
   // ── Video editor (our own surface) ──────────────────────────────
   video_timeline_get: "read",
@@ -14936,16 +14935,14 @@ var TOOL_TIERS = Object.freeze({
   // autosave point still holds, while replacing the body overwrites it.
   editor_insert_draft: "write",
   // `write`, and it stays that way because it REFUSES an occupied body rather
-  // than overwriting it. The day it gains a replace fallback, a destructive act
-  // hides under a session toggle the user granted once — so that fallback is a
-  // review-block, not a convenience.
+  // than overwriting it. A replace fallback would make it destructive while its
+  // confirm still reads as an append, so that fallback is a review-block.
   editor_place_draft: "write",
   // Opening a window edits no document, but it does create a tab in the user's
-  // browser, and a session that has not enabled editing can do nothing with the
-  // window anyway — one tier keeps it one thing for the user to allow.
+  // browser — one tier keeps it one thing for the user to allow.
   editor_open_window: "write",
   // Closing a window cannot be undone and the user's draft may be inside, so
-  // it is asked per call rather than covered by a forgotten session toggle.
+  // the confirm names the loss rather than the tab.
   editor_reduce_windows: "destructive",
   // Insertion appends, so it never passes through the overwrite prompt; the
   // tier is the only barrier, and the user approves each image's source.
@@ -32766,8 +32763,7 @@ var TOOL_TIERS2 = Object.freeze({
   // ── Gallery: the free way in ────────────────────────────────────
   //
   // Destructive because it reads a path off the user's disk, the same
-  // capability editor_insert_image carries. A session toggle would open the
-  // whole filesystem once and stay open.
+  // capability editor_insert_image carries, and the confirm names that read.
   gallery_image_add: "destructive",
   // ── Video editor (our own surface) ──────────────────────────────
   video_timeline_get: "read",
@@ -32807,16 +32803,14 @@ var TOOL_TIERS2 = Object.freeze({
   // autosave point still holds, while replacing the body overwrites it.
   editor_insert_draft: "write",
   // `write`, and it stays that way because it REFUSES an occupied body rather
-  // than overwriting it. The day it gains a replace fallback, a destructive act
-  // hides under a session toggle the user granted once — so that fallback is a
-  // review-block, not a convenience.
+  // than overwriting it. A replace fallback would make it destructive while its
+  // confirm still reads as an append, so that fallback is a review-block.
   editor_place_draft: "write",
   // Opening a window edits no document, but it does create a tab in the user's
-  // browser, and a session that has not enabled editing can do nothing with the
-  // window anyway — one tier keeps it one thing for the user to allow.
+  // browser — one tier keeps it one thing for the user to allow.
   editor_open_window: "write",
   // Closing a window cannot be undone and the user's draft may be inside, so
-  // it is asked per call rather than covered by a forgotten session toggle.
+  // the confirm names the loss rather than the tab.
   editor_reduce_windows: "destructive",
   // Insertion appends, so it never passes through the overwrite prompt; the
   // tier is the only barrier, and the user approves each image's source.

package/dist/cli.js

@@ -3,7 +3,7 @@ import {
   dispatchCli,
   runAdapter,
   runDaemon
-} from "./chunk-NRRASSG3.js";
+} from "./chunk-M6GZ27IE.js";
 import "./chunk-MLKGABMK.js";
 
 // src/cli.ts

package/dist/index.js

@@ -3,7 +3,7 @@ import {
   dispatchCli,
   ensureDaemonRunning,
   runAdapter
-} from "./chunk-NRRASSG3.js";
+} from "./chunk-M6GZ27IE.js";
 import "./chunk-MLKGABMK.js";
 export {
   createAdapterServer,

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@modootoday/datalab-extension-mcp",
-  "version": "1.9.1",
+  "version": "1.9.2",
   "private": false,
   "type": "module",
   "main": "./dist/index.js",