@meteora-ag/cp-amm-sdk 1.0.1-rc.35 → 1.0.1-rc.36

package/node_modules/bigint-buffer/README.md

@@ -1,121 +0,0 @@
-# 💪🔢 bigint-buffer: Buffer Utilities for TC39 BigInt Proposal 
-[![NPM Package](https://img.shields.io/npm/v/bigint-buffer.svg?style=flat-square)](https://www.npmjs.org/package/bigint-buffer)
-[![Build Status](https://img.shields.io/travis/com/no2chem/bigint-buffer.svg?branch=master&style=flat-square)](https://travis-ci.com/no2chem/bigint-buffer)
-[![Coverage Status](https://img.shields.io/coveralls/no2chem/bigint-buffer.svg?style=flat-square)](https://coveralls.io/r/no2chem/bigint-buffer)
-![node](https://img.shields.io/node/v/bigint-buffer.svg?style=flat-square)
-
-[bigint-buffer](https://www.npmjs.org/package/bigint-buffer) is a utility converts [TC39 Proposed BigInts](https://github.com/tc39/proposal-bigint) to and from buffers. This utility is necessary because BigInts, as proposed, do not support direct conversion between Buffers (or UInt8Arrays), but rather require conversion from buffers to hexadecimal strings then to BigInts, which is suboptimal. This utility includes N-API bindings, so under node, conversion is performed without generating a hexadecimal string. In the browser, normal string conversion is used.
-
-# Why use BigInts?
-
-BigInts are currently a stage 3 proposal, supported in Node 10 and V8 v6.7. BigInts are primitive arbitrary precision integers, overcoming the limitations of the number type in javascript, which only supports up to 53 bits of precision. 
-
-In many applications, manipulating 64, 128 or even 256 bit numbers is quite common. For example, database identifiers are often 128 bits, and hashes are often 256 bits (If you're looking for hashing support, try out [bigint-hash](https://github.com/no2chem/bigint-hash)). Before BigInts, manipulating these numbers safely required either allocating a Buffer or UInt8Arrays, which is quite expensive compared to a number, since Buffers are allocated on the heap. 
-
-BigInts solve this problem by introducing a primitive that can hold
-arbitrary precision integers, reducing memory pressure and allowing
-the runtime to better optimize arithmetic operations. This results in significant performance improvements - 10x-100x for simple equality comparisons (using `===` vs `Buffer.compare()`):
-
-```
-Buffer equality comparison: 11916844±4.23% ops/s 83.91±17.293 ns/op (91 runs)
-bigint equality comparison: 798024851±0.29% ops/s 1.25±0.017 ns/op (91 runs)
-```
-
-Before BigInts, you probably used a library such as the widely used [bn.js](https://www.npmjs.com/package/bn.js).
-bn.js fares a little better than a plain Buffer, but is still 5-10x slower than the bigint:
-```
-BN equality comparison: 73255774±0.67% ops/s 13.65±0.442 ns/op (89 runs)
-```
-
-bigints are also much better with arithmetic, here are the results compared to BN for multiplying two
-128-bit integers, yielding a 4x improvement:
-```
-BN multiply: 4763236±0.49% ops/s 209.94±5.111 ns/op (93 runs)
-bigint multiply: 15268666±0.92% ops/s 65.49±2.938 ns/op (92 runs)
-```
-
-# So what's the problem?
-
-BigInts, unfortunately lack an efficient way to be converted back and forth between buffers. When dealing with serialized data or legacy node code, you'll often want to generate a BigInt from a buffer, or convert a BigInt to a Buffer in order to send a BigInt over the wire.
-
-Currently, the only method to generate a new BigInt is with the BigInt constructor. Unfortunately, it doesn't support Buffers, though it may in the future:
-
-```
-> BigInt(Buffer.from([1]))
-SyntaxError: Cannot convert  to a BigInt
-```
-
-Instead, you need to convert the Buffer to a hexadecimal string of the correct format. For example:
-
-```
-> BigInt(`0x${buf.toString('hex')}`);
-1n
-```
-
-These conversions are not only quite expensive, but obviate a lot of the performance gains we get from BigInts. For example, on a large buffer, this conversion can take over 100x the time to do a comparison:
-```
-bigint from hex string from buffer (huge): 1230607±1.02% ops/s 812.61±40.013 ns/op (89 runs)
-```
-
-# And... bigint-buffer helps how?
-
-bigint-buffer introduces four functions for conversion between buffers and bigints. A small example follows:
-```typescript
-import {toBigIntBE, toBigIntLE, toBufferBE, toBufferLE} from 'bigint-buffer';
-
-// Get a big endian buffer of the given width
-toBufferBE(0xdeadbeefn, 8);
-// ↪ <Buffer 00 00 00 00 de ad be ef>
-
-// Get a little endian buffer of the given width
-toBufferLE(0xdeadbeefn, 8);
-// ↪ <Buffer ef be ad de 00 00 00 00>
-
-// Get a BigInt from a buffer in big endian format
-toBigIntBE(Buffer.from('deadbeef', 'hex'));
-// ↪ 3735928559n (0xdeadbeefn)
-
-// Get a BigInt from a buffer in little endian format
-toBigIntLE(Buffer.from('deadbeef', 'hex'));
-// ↪ 4022250974n (0xefbeadd0en)
-```
-
-bigint-buffer uses N-API native bindings to perform the conversion efficiently without generating the
-immediate hex strings necessary in pure javascript. This results in a significant performance increase,
-about 2x for small buffer to bigint conversions, and 8x better than BN:
-
-```
-BN to buffer (small): 981703±68.30% ops/s 1018.64±3194.648 ns/op (81 runs)
-bigint from hex string from buffer (small): 2804915±5.00% ops/s 356.52±85.371 ns/op (88 runs)
-LE bigint-buffer ToBigInt (small): 5932704±1.62% ops/s 168.56±12.971 ns/op (87 runs)
-```
-
-And about 3.3x for bigint to buffer conversions, and 17x better than BN:
-```
-BN to buffer (large): 339437±2.85% ops/s 2946.06±385.504 ns/op (81 runs)
-BE bigint to hex string to buffer (large): 1714292±1.35% ops/s 583.33±37.995 ns/op (90 runs)
-BE bigint-buffer to buffer (large, truncated): 5977218±4.68% ops/s 167.30±37.284 ns/op (87 runs)
-```
-
-You can run the benchmarks by running `npm run benchmark`.
-
-# Typescript Support
-
-bigint-buffer supplies typescript bindings, but BigInts are still not supported in typescript, though
-a pull request has been opened, so support should be coming soon. If you are using typescript,
-@calebsander has put up a pull request and the instructions in [this post](https://github.com/Microsoft/TypeScript/issues/15096#issuecomment-419654748).
-
-# Install
-
-Add bigint-buffer to your project with:
-
-> `npm install bigint-buffer`
-
-# Documentation
-
-Basic API documentation can be found [here](https://no2chem.github.io/bigint-buffer/). Note that v1.0.0 changes
-the name of the original functions to meet style guidelines.
-
-# Benchmarks
-
-Benchmarks can be run by executing `npm run benchmark` from the package directory.

package/node_modules/bigint-buffer/binding.gyp

@@ -1,8 +0,0 @@
-{
-  "targets": [{
-    "target_name": "bigint_buffer",
-    "sources": [
-      "src/bigint-buffer.c"
-    ]
-  }]
-}

package/node_modules/bigint-buffer/build/Makefile

@@ -1,347 +0,0 @@
-# We borrow heavily from the kernel build setup, though we are simpler since
-# we don't have Kconfig tweaking settings on us.
-
-# The implicit make rules have it looking for RCS files, among other things.
-# We instead explicitly write all the rules we care about.
-# It's even quicker (saves ~200ms) to pass -r on the command line.
-MAKEFLAGS=-r
-
-# The source directory tree.
-srcdir := ..
-abs_srcdir := $(abspath $(srcdir))
-
-# The name of the builddir.
-builddir_name ?= .
-
-# The V=1 flag on command line makes us verbosely print command lines.
-ifdef V
-  quiet=
-else
-  quiet=quiet_
-endif
-
-# Specify BUILDTYPE=Release on the command line for a release build.
-BUILDTYPE ?= Release
-
-# Directory all our build output goes into.
-# Note that this must be two directories beneath src/ for unit tests to pass,
-# as they reach into the src/ directory for data with relative paths.
-builddir ?= $(builddir_name)/$(BUILDTYPE)
-abs_builddir := $(abspath $(builddir))
-depsdir := $(builddir)/.deps
-
-# Object output directory.
-obj := $(builddir)/obj
-abs_obj := $(abspath $(obj))
-
-# We build up a list of every single one of the targets so we can slurp in the
-# generated dependency rule Makefiles in one pass.
-all_deps :=
-
-
-
-CC.target ?= $(CC)
-CFLAGS.target ?= $(CPPFLAGS) $(CFLAGS)
-CXX.target ?= $(CXX)
-CXXFLAGS.target ?= $(CPPFLAGS) $(CXXFLAGS)
-LINK.target ?= $(LINK)
-LDFLAGS.target ?= $(LDFLAGS)
-AR.target ?= $(AR)
-PLI.target ?= pli
-
-# C++ apps need to be linked with g++.
-LINK ?= $(CXX.target)
-
-# TODO(evan): move all cross-compilation logic to gyp-time so we don't need
-# to replicate this environment fallback in make as well.
-CC.host ?= gcc
-CFLAGS.host ?= $(CPPFLAGS_host) $(CFLAGS_host)
-CXX.host ?= g++
-CXXFLAGS.host ?= $(CPPFLAGS_host) $(CXXFLAGS_host)
-LINK.host ?= $(CXX.host)
-LDFLAGS.host ?= $(LDFLAGS_host)
-AR.host ?= ar
-PLI.host ?= pli
-
-# Define a dir function that can handle spaces.
-# http://www.gnu.org/software/make/manual/make.html#Syntax-of-Functions
-# "leading spaces cannot appear in the text of the first argument as written.
-# These characters can be put into the argument value by variable substitution."
-empty :=
-space := $(empty) $(empty)
-
-# http://stackoverflow.com/questions/1189781/using-make-dir-or-notdir-on-a-path-with-spaces
-replace_spaces = $(subst $(space),?,$1)
-unreplace_spaces = $(subst ?,$(space),$1)
-dirx = $(call unreplace_spaces,$(dir $(call replace_spaces,$1)))
-
-# Flags to make gcc output dependency info.  Note that you need to be
-# careful here to use the flags that ccache and distcc can understand.
-# We write to a dep file on the side first and then rename at the end
-# so we can't end up with a broken dep file.
-depfile = $(depsdir)/$(call replace_spaces,$@).d
-DEPFLAGS = -MMD -MF $(depfile).raw
-
-# We have to fixup the deps output in a few ways.
-# (1) the file output should mention the proper .o file.
-# ccache or distcc lose the path to the target, so we convert a rule of
-# the form:
-#   foobar.o: DEP1 DEP2
-# into
-#   path/to/foobar.o: DEP1 DEP2
-# (2) we want missing files not to cause us to fail to build.
-# We want to rewrite
-#   foobar.o: DEP1 DEP2 \
-#               DEP3
-# to
-#   DEP1:
-#   DEP2:
-#   DEP3:
-# so if the files are missing, they're just considered phony rules.
-# We have to do some pretty insane escaping to get those backslashes
-# and dollar signs past make, the shell, and sed at the same time.
-# Doesn't work with spaces, but that's fine: .d files have spaces in
-# their names replaced with other characters.
-define fixup_dep
-# The depfile may not exist if the input file didn't have any #includes.
-touch $(depfile).raw
-# Fixup path as in (1).
-sed -e "s|^$(notdir $@)|$@|" $(depfile).raw >> $(depfile)
-# Add extra rules as in (2).
-# We remove slashes and replace spaces with new lines;
-# remove blank lines;
-# delete the first line and append a colon to the remaining lines.
-sed -e 's|\\||' -e 'y| |\n|' $(depfile).raw |\
-  grep -v '^$$'                             |\
-  sed -e 1d -e 's|$$|:|'                     \
-    >> $(depfile)
-rm $(depfile).raw
-endef
-
-# Command definitions:
-# - cmd_foo is the actual command to run;
-# - quiet_cmd_foo is the brief-output summary of the command.
-
-quiet_cmd_cc = CC($(TOOLSET)) $@
-cmd_cc = $(CC.$(TOOLSET)) -o $@ $< $(GYP_CFLAGS) $(DEPFLAGS) $(CFLAGS.$(TOOLSET)) -c
-
-quiet_cmd_cxx = CXX($(TOOLSET)) $@
-cmd_cxx = $(CXX.$(TOOLSET)) -o $@ $< $(GYP_CXXFLAGS) $(DEPFLAGS) $(CXXFLAGS.$(TOOLSET)) -c
-
-quiet_cmd_objc = CXX($(TOOLSET)) $@
-cmd_objc = $(CC.$(TOOLSET)) $(GYP_OBJCFLAGS) $(DEPFLAGS) -c -o $@ $<
-
-quiet_cmd_objcxx = CXX($(TOOLSET)) $@
-cmd_objcxx = $(CXX.$(TOOLSET)) $(GYP_OBJCXXFLAGS) $(DEPFLAGS) -c -o $@ $<
-
-# Commands for precompiled header files.
-quiet_cmd_pch_c = CXX($(TOOLSET)) $@
-cmd_pch_c = $(CC.$(TOOLSET)) $(GYP_PCH_CFLAGS) $(DEPFLAGS) $(CXXFLAGS.$(TOOLSET)) -c -o $@ $<
-quiet_cmd_pch_cc = CXX($(TOOLSET)) $@
-cmd_pch_cc = $(CC.$(TOOLSET)) $(GYP_PCH_CXXFLAGS) $(DEPFLAGS) $(CXXFLAGS.$(TOOLSET)) -c -o $@ $<
-quiet_cmd_pch_m = CXX($(TOOLSET)) $@
-cmd_pch_m = $(CC.$(TOOLSET)) $(GYP_PCH_OBJCFLAGS) $(DEPFLAGS) -c -o $@ $<
-quiet_cmd_pch_mm = CXX($(TOOLSET)) $@
-cmd_pch_mm = $(CC.$(TOOLSET)) $(GYP_PCH_OBJCXXFLAGS) $(DEPFLAGS) -c -o $@ $<
-
-# gyp-mac-tool is written next to the root Makefile by gyp.
-# Use $(4) for the command, since $(2) and $(3) are used as flag by do_cmd
-# already.
-quiet_cmd_mac_tool = MACTOOL $(4) $<
-cmd_mac_tool = ./gyp-mac-tool $(4) $< "$@"
-
-quiet_cmd_mac_package_framework = PACKAGE FRAMEWORK $@
-cmd_mac_package_framework = ./gyp-mac-tool package-framework "$@" $(4)
-
-quiet_cmd_infoplist = INFOPLIST $@
-cmd_infoplist = $(CC.$(TOOLSET)) -E -P -Wno-trigraphs -x c $(INFOPLIST_DEFINES) "$<" -o "$@"
-
-quiet_cmd_touch = TOUCH $@
-cmd_touch = touch $@
-
-quiet_cmd_copy = COPY $@
-# send stderr to /dev/null to ignore messages when linking directories.
-cmd_copy = ln -f "$<" "$@" 2>/dev/null || (rm -rf "$@" && cp -af "$<" "$@")
-
-quiet_cmd_symlink = SYMLINK $@
-cmd_symlink = ln -sf "$<" "$@"
-
-quiet_cmd_alink = LIBTOOL-STATIC $@
-cmd_alink = rm -f $@ && ./gyp-mac-tool filter-libtool libtool $(GYP_LIBTOOLFLAGS) -static -o $@ $(filter %.o,$^)
-
-quiet_cmd_link = LINK($(TOOLSET)) $@
-cmd_link = $(LINK.$(TOOLSET)) $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -o "$@" $(LD_INPUTS) $(LIBS)
-
-quiet_cmd_solink = SOLINK($(TOOLSET)) $@
-cmd_solink = $(LINK.$(TOOLSET)) -shared $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -o "$@" $(LD_INPUTS) $(LIBS)
-
-quiet_cmd_solink_module = SOLINK_MODULE($(TOOLSET)) $@
-cmd_solink_module = $(LINK.$(TOOLSET)) -bundle $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -o $@ $(filter-out FORCE_DO_CMD, $^) $(LIBS)
-
-
-# Define an escape_quotes function to escape single quotes.
-# This allows us to handle quotes properly as long as we always use
-# use single quotes and escape_quotes.
-escape_quotes = $(subst ','\'',$(1))
-# This comment is here just to include a ' to unconfuse syntax highlighting.
-# Define an escape_vars function to escape '$' variable syntax.
-# This allows us to read/write command lines with shell variables (e.g.
-# $LD_LIBRARY_PATH), without triggering make substitution.
-escape_vars = $(subst $$,$$$$,$(1))
-# Helper that expands to a shell command to echo a string exactly as it is in
-# make. This uses printf instead of echo because printf's behaviour with respect
-# to escape sequences is more portable than echo's across different shells
-# (e.g., dash, bash).
-exact_echo = printf '%s\n' '$(call escape_quotes,$(1))'
-
-# Helper to compare the command we're about to run against the command
-# we logged the last time we ran the command.  Produces an empty
-# string (false) when the commands match.
-# Tricky point: Make has no string-equality test function.
-# The kernel uses the following, but it seems like it would have false
-# positives, where one string reordered its arguments.
-#   arg_check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \
-#                       $(filter-out $(cmd_$@), $(cmd_$(1))))
-# We instead substitute each for the empty string into the other, and
-# say they're equal if both substitutions produce the empty string.
-# .d files contain ? instead of spaces, take that into account.
-command_changed = $(or $(subst $(cmd_$(1)),,$(cmd_$(call replace_spaces,$@))),\
-                       $(subst $(cmd_$(call replace_spaces,$@)),,$(cmd_$(1))))
-
-# Helper that is non-empty when a prerequisite changes.
-# Normally make does this implicitly, but we force rules to always run
-# so we can check their command lines.
-#   $? -- new prerequisites
-#   $| -- order-only dependencies
-prereq_changed = $(filter-out FORCE_DO_CMD,$(filter-out $|,$?))
-
-# Helper that executes all postbuilds until one fails.
-define do_postbuilds
-  @E=0;\
-  for p in $(POSTBUILDS); do\
-    eval $$p;\
-    E=$$?;\
-    if [ $$E -ne 0 ]; then\
-      break;\
-    fi;\
-  done;\
-  if [ $$E -ne 0 ]; then\
-    rm -rf "$@";\
-    exit $$E;\
-  fi
-endef
-
-# do_cmd: run a command via the above cmd_foo names, if necessary.
-# Should always run for a given target to handle command-line changes.
-# Second argument, if non-zero, makes it do asm/C/C++ dependency munging.
-# Third argument, if non-zero, makes it do POSTBUILDS processing.
-# Note: We intentionally do NOT call dirx for depfile, since it contains ? for
-# spaces already and dirx strips the ? characters.
-define do_cmd
-$(if $(or $(command_changed),$(prereq_changed)),
-  @$(call exact_echo,  $($(quiet)cmd_$(1)))
-  @mkdir -p "$(call dirx,$@)" "$(dir $(depfile))"
-  $(if $(findstring flock,$(word 2,$(cmd_$1))),
-    @$(cmd_$(1))
-    @echo "  $(quiet_cmd_$(1)): Finished",
-    @$(cmd_$(1))
-  )
-  @$(call exact_echo,$(call escape_vars,cmd_$(call replace_spaces,$@) := $(cmd_$(1)))) > $(depfile)
-  @$(if $(2),$(fixup_dep))
-  $(if $(and $(3), $(POSTBUILDS)),
-    $(call do_postbuilds)
-  )
-)
-endef
-
-# Declare the "all" target first so it is the default,
-# even though we don't have the deps yet.
-.PHONY: all
-all:
-
-# make looks for ways to re-generate included makefiles, but in our case, we
-# don't have a direct way. Explicitly telling make that it has nothing to do
-# for them makes it go faster.
-%.d: ;
-
-# Use FORCE_DO_CMD to force a target to run.  Should be coupled with
-# do_cmd.
-.PHONY: FORCE_DO_CMD
-FORCE_DO_CMD:
-
-TOOLSET := target
-# Suffix rules, putting all outputs into $(obj).
-$(obj).$(TOOLSET)/%.o: $(srcdir)/%.c FORCE_DO_CMD
-	@$(call do_cmd,cc,1)
-$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cc FORCE_DO_CMD
-	@$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cpp FORCE_DO_CMD
-	@$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cxx FORCE_DO_CMD
-	@$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(srcdir)/%.m FORCE_DO_CMD
-	@$(call do_cmd,objc,1)
-$(obj).$(TOOLSET)/%.o: $(srcdir)/%.mm FORCE_DO_CMD
-	@$(call do_cmd,objcxx,1)
-$(obj).$(TOOLSET)/%.o: $(srcdir)/%.s FORCE_DO_CMD
-	@$(call do_cmd,cc,1)
-$(obj).$(TOOLSET)/%.o: $(srcdir)/%.S FORCE_DO_CMD
-	@$(call do_cmd,cc,1)
-
-# Try building from generated source, too.
-$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.c FORCE_DO_CMD
-	@$(call do_cmd,cc,1)
-$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cc FORCE_DO_CMD
-	@$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cpp FORCE_DO_CMD
-	@$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cxx FORCE_DO_CMD
-	@$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.m FORCE_DO_CMD
-	@$(call do_cmd,objc,1)
-$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.mm FORCE_DO_CMD
-	@$(call do_cmd,objcxx,1)
-$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.s FORCE_DO_CMD
-	@$(call do_cmd,cc,1)
-$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.S FORCE_DO_CMD
-	@$(call do_cmd,cc,1)
-
-$(obj).$(TOOLSET)/%.o: $(obj)/%.c FORCE_DO_CMD
-	@$(call do_cmd,cc,1)
-$(obj).$(TOOLSET)/%.o: $(obj)/%.cc FORCE_DO_CMD
-	@$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(obj)/%.cpp FORCE_DO_CMD
-	@$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(obj)/%.cxx FORCE_DO_CMD
-	@$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(obj)/%.m FORCE_DO_CMD
-	@$(call do_cmd,objc,1)
-$(obj).$(TOOLSET)/%.o: $(obj)/%.mm FORCE_DO_CMD
-	@$(call do_cmd,objcxx,1)
-$(obj).$(TOOLSET)/%.o: $(obj)/%.s FORCE_DO_CMD
-	@$(call do_cmd,cc,1)
-$(obj).$(TOOLSET)/%.o: $(obj)/%.S FORCE_DO_CMD
-	@$(call do_cmd,cc,1)
-
-
-ifeq ($(strip $(foreach prefix,$(NO_LOAD),\
-    $(findstring $(join ^,$(prefix)),\
-                 $(join ^,bigint_buffer.target.mk)))),)
-  include bigint_buffer.target.mk
-endif
-
-quiet_cmd_regen_makefile = ACTION Regenerating $@
-cmd_regen_makefile = cd $(srcdir); /opt/homebrew/Cellar/node@20/20.19.0/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py -fmake --ignore-environment "-Dlibrary=shared_library" "-Dvisibility=default" "-Dnode_root_dir=/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0" "-Dnode_gyp_dir=/opt/homebrew/Cellar/node@20/20.19.0/lib/node_modules/npm/node_modules/node-gyp" "-Dnode_lib_file=/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/<(target_arch)/node.lib" "-Dmodule_root_dir=/Users/nguyennguyen/Repos/racoons/cp-amm-sdk/node_modules/bigint-buffer" "-Dnode_engine=v8" "--depth=." "-Goutput_dir=." "--generator-output=build" -I/Users/nguyennguyen/Repos/racoons/cp-amm-sdk/node_modules/bigint-buffer/build/config.gypi -I/opt/homebrew/Cellar/node@20/20.19.0/lib/node_modules/npm/node_modules/node-gyp/addon.gypi -I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/include/node/common.gypi "--toplevel-dir=." binding.gyp
-Makefile: $(srcdir)/build/config.gypi $(srcdir)/../../../../../Library/Caches/node-gyp/20.19.0/include/node/common.gypi $(srcdir)/binding.gyp $(srcdir)/../../../../../../../opt/homebrew/Cellar/node@20/20.19.0/lib/node_modules/npm/node_modules/node-gyp/addon.gypi
-	$(call do_cmd,regen_makefile)
-
-# "all" is a concatenation of the "all" targets from all the included
-# sub-makefiles. This is just here to clarify.
-all:
-
-# Add in dependency-tracking rules.  $(all_deps) is the list of every single
-# target in our tree. Only consider the ones with .d (dependency) info:
-d_files := $(wildcard $(foreach f,$(all_deps),$(depsdir)/$(f).d))
-ifneq ($(d_files),)
-  include $(d_files)
-endif

package/node_modules/bigint-buffer/build/Release/.deps/Release/bigint_buffer.node.d

@@ -1 +0,0 @@
-cmd_Release/bigint_buffer.node := c++ -bundle -undefined dynamic_lookup -Wl,-search_paths_first -mmacosx-version-min=10.15 -arch arm64 -L./Release -stdlib=libc++  -o Release/bigint_buffer.node Release/obj.target/bigint_buffer/src/bigint-buffer.o 

package/node_modules/bigint-buffer/build/Release/.deps/Release/obj.target/bigint_buffer/src/bigint-buffer.o.d

@@ -1,12 +0,0 @@
-cmd_Release/obj.target/bigint_buffer/src/bigint-buffer.o := cc -o Release/obj.target/bigint_buffer/src/bigint-buffer.o ../src/bigint-buffer.c '-DNODE_GYP_MODULE_NAME=bigint_buffer' '-DUSING_UV_SHARED=1' '-DUSING_V8_SHARED=1' '-DV8_DEPRECATION_WARNINGS=1' '-D_GLIBCXX_USE_CXX11_ABI=1' '-D_DARWIN_USE_64_BIT_INODE=1' '-D_LARGEFILE_SOURCE' '-D_FILE_OFFSET_BITS=64' '-DBUILDING_NODE_EXTENSION' -I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/include/node -I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/src -I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/deps/openssl/config -I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/deps/openssl/openssl/include -I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/deps/uv/include -I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/deps/zlib -I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/deps/v8/include  -O3 -gdwarf-2 -flto -mmacosx-version-min=10.15 -arch arm64 -Wall -Wendif-labels -W -Wno-unused-parameter -fno-strict-aliasing -MMD -MF ./Release/.deps/Release/obj.target/bigint_buffer/src/bigint-buffer.o.d.raw   -c
-Release/obj.target/bigint_buffer/src/bigint-buffer.o: \
-  ../src/bigint-buffer.c \
-  /Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/include/node/node_api.h \
-  /Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/include/node/js_native_api.h \
-  /Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/include/node/js_native_api_types.h \
-  /Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/include/node/node_api_types.h
-../src/bigint-buffer.c:
-/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/include/node/node_api.h:
-/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/include/node/js_native_api.h:
-/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/include/node/js_native_api_types.h:
-/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/include/node/node_api_types.h:

package/node_modules/bigint-buffer/build/bigint_buffer.target.mk

@@ -1,180 +0,0 @@
-# This file is generated by gyp; do not edit.
-
-TOOLSET := target
-TARGET := bigint_buffer
-DEFS_Debug := \
-	'-DNODE_GYP_MODULE_NAME=bigint_buffer' \
-	'-DUSING_UV_SHARED=1' \
-	'-DUSING_V8_SHARED=1' \
-	'-DV8_DEPRECATION_WARNINGS=1' \
-	'-D_GLIBCXX_USE_CXX11_ABI=1' \
-	'-D_DARWIN_USE_64_BIT_INODE=1' \
-	'-D_LARGEFILE_SOURCE' \
-	'-D_FILE_OFFSET_BITS=64' \
-	'-DBUILDING_NODE_EXTENSION' \
-	'-DDEBUG' \
-	'-D_DEBUG'
-
-# Flags passed to all source files.
-CFLAGS_Debug := \
-	-O0 \
-	-gdwarf-2 \
-	-mmacosx-version-min=10.15 \
-	-arch arm64 \
-	-Wall \
-	-Wendif-labels \
-	-W \
-	-Wno-unused-parameter
-
-# Flags passed to only C files.
-CFLAGS_C_Debug := \
-	-fno-strict-aliasing
-
-# Flags passed to only C++ files.
-CFLAGS_CC_Debug := \
-	-std=gnu++17 \
-	-stdlib=libc++ \
-	-fno-rtti \
-	-fno-exceptions \
-	-fno-strict-aliasing
-
-# Flags passed to only ObjC files.
-CFLAGS_OBJC_Debug :=
-
-# Flags passed to only ObjC++ files.
-CFLAGS_OBJCC_Debug :=
-
-INCS_Debug := \
-	-I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/include/node \
-	-I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/src \
-	-I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/deps/openssl/config \
-	-I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/deps/openssl/openssl/include \
-	-I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/deps/uv/include \
-	-I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/deps/zlib \
-	-I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/deps/v8/include
-
-DEFS_Release := \
-	'-DNODE_GYP_MODULE_NAME=bigint_buffer' \
-	'-DUSING_UV_SHARED=1' \
-	'-DUSING_V8_SHARED=1' \
-	'-DV8_DEPRECATION_WARNINGS=1' \
-	'-D_GLIBCXX_USE_CXX11_ABI=1' \
-	'-D_DARWIN_USE_64_BIT_INODE=1' \
-	'-D_LARGEFILE_SOURCE' \
-	'-D_FILE_OFFSET_BITS=64' \
-	'-DBUILDING_NODE_EXTENSION'
-
-# Flags passed to all source files.
-CFLAGS_Release := \
-	-O3 \
-	-gdwarf-2 \
-	-flto \
-	-mmacosx-version-min=10.15 \
-	-arch arm64 \
-	-Wall \
-	-Wendif-labels \
-	-W \
-	-Wno-unused-parameter
-
-# Flags passed to only C files.
-CFLAGS_C_Release := \
-	-fno-strict-aliasing
-
-# Flags passed to only C++ files.
-CFLAGS_CC_Release := \
-	-std=gnu++17 \
-	-stdlib=libc++ \
-	-fno-rtti \
-	-fno-exceptions \
-	-fno-strict-aliasing
-
-# Flags passed to only ObjC files.
-CFLAGS_OBJC_Release :=
-
-# Flags passed to only ObjC++ files.
-CFLAGS_OBJCC_Release :=
-
-INCS_Release := \
-	-I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/include/node \
-	-I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/src \
-	-I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/deps/openssl/config \
-	-I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/deps/openssl/openssl/include \
-	-I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/deps/uv/include \
-	-I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/deps/zlib \
-	-I/Users/nguyennguyen/Library/Caches/node-gyp/20.19.0/deps/v8/include
-
-OBJS := \
-	$(obj).target/$(TARGET)/src/bigint-buffer.o
-
-# Add to the list of files we specially track dependencies for.
-all_deps += $(OBJS)
-
-# CFLAGS et al overrides must be target-local.
-# See "Target-specific Variable Values" in the GNU Make manual.
-$(OBJS): TOOLSET := $(TOOLSET)
-$(OBJS): GYP_CFLAGS := $(DEFS_$(BUILDTYPE)) $(INCS_$(BUILDTYPE))  $(CFLAGS_$(BUILDTYPE)) $(CFLAGS_C_$(BUILDTYPE))
-$(OBJS): GYP_CXXFLAGS := $(DEFS_$(BUILDTYPE)) $(INCS_$(BUILDTYPE))  $(CFLAGS_$(BUILDTYPE)) $(CFLAGS_CC_$(BUILDTYPE))
-$(OBJS): GYP_OBJCFLAGS := $(DEFS_$(BUILDTYPE)) $(INCS_$(BUILDTYPE))  $(CFLAGS_$(BUILDTYPE)) $(CFLAGS_C_$(BUILDTYPE)) $(CFLAGS_OBJC_$(BUILDTYPE))
-$(OBJS): GYP_OBJCXXFLAGS := $(DEFS_$(BUILDTYPE)) $(INCS_$(BUILDTYPE))  $(CFLAGS_$(BUILDTYPE)) $(CFLAGS_CC_$(BUILDTYPE)) $(CFLAGS_OBJCC_$(BUILDTYPE))
-
-# Suffix rules, putting all outputs into $(obj).
-
-$(obj).$(TOOLSET)/$(TARGET)/%.o: $(srcdir)/%.c FORCE_DO_CMD
-	@$(call do_cmd,cc,1)
-
-# Try building from generated source, too.
-
-$(obj).$(TOOLSET)/$(TARGET)/%.o: $(obj).$(TOOLSET)/%.c FORCE_DO_CMD
-	@$(call do_cmd,cc,1)
-
-$(obj).$(TOOLSET)/$(TARGET)/%.o: $(obj)/%.c FORCE_DO_CMD
-	@$(call do_cmd,cc,1)
-
-# End of this set of suffix rules
-### Rules for final target.
-LDFLAGS_Debug := \
-	-undefined dynamic_lookup \
-	-Wl,-search_paths_first \
-	-mmacosx-version-min=10.15 \
-	-arch arm64 \
-	-L$(builddir) \
-	-stdlib=libc++
-
-LIBTOOLFLAGS_Debug := \
-	-undefined dynamic_lookup \
-	-Wl,-search_paths_first
-
-LDFLAGS_Release := \
-	-undefined dynamic_lookup \
-	-Wl,-search_paths_first \
-	-mmacosx-version-min=10.15 \
-	-arch arm64 \
-	-L$(builddir) \
-	-stdlib=libc++
-
-LIBTOOLFLAGS_Release := \
-	-undefined dynamic_lookup \
-	-Wl,-search_paths_first
-
-LIBS :=
-
-$(builddir)/bigint_buffer.node: GYP_LDFLAGS := $(LDFLAGS_$(BUILDTYPE))
-$(builddir)/bigint_buffer.node: LIBS := $(LIBS)
-$(builddir)/bigint_buffer.node: GYP_LIBTOOLFLAGS := $(LIBTOOLFLAGS_$(BUILDTYPE))
-$(builddir)/bigint_buffer.node: TOOLSET := $(TOOLSET)
-$(builddir)/bigint_buffer.node: $(OBJS) FORCE_DO_CMD
-	$(call do_cmd,solink_module)
-
-all_deps += $(builddir)/bigint_buffer.node
-# Add target alias
-.PHONY: bigint_buffer
-bigint_buffer: $(builddir)/bigint_buffer.node
-
-# Short alias for building this executable.
-.PHONY: bigint_buffer.node
-bigint_buffer.node: $(builddir)/bigint_buffer.node
-
-# Add executable to "all" target.
-.PHONY: all
-all: $(builddir)/bigint_buffer.node
-