@metamesh/modeling 0.17.0 → 0.19.0

package/dist/docs/reference/model/pathPattern.md

@@ -6,7 +6,7 @@ Physical arc-length copies along a sampled path, with optional tangent orientati
 
 
 
-**pathPattern**(`source`: [`PatternSource`](PatternSource.md), `path`: [`Path3Input`](Path3Input.md), `options`: [`PathPatternOptions`](PathPatternOptions.md)): readonly [`Solid`](Solid.md)[]
+**pathPattern**(`source`: [`PatternSource`](PatternSource.md), `path`: [`Path3Input`](../geometry/Path3Input.md), `options`: [`PathPatternOptions`](../geometry/PathPatternOptions.md)): readonly [`Solid`](Solid.md)[]
 
 
 
@@ -28,23 +28,23 @@ Physical arc-length copies along a sampled path, with optional tangent orientati
 
 <a id="path"></a>
 
-**`path`** · [`Path3Input`](Path3Input.md) · Required
+**`path`** · [`Path3Input`](../geometry/Path3Input.md) · Required
 
 
 
 <a id="options"></a>
 
-**`options`** · [`PathPatternOptions`](PathPatternOptions.md) · Required
+**`options`** · [`PathPatternOptions`](../geometry/PathPatternOptions.md) · Required
 
-- [`count`](PathPatternOptions.md#count) · `number` · Required
+- [`count`](../geometry/PathPatternOptions.md#count) · `number` · Required
 
   Positive number of copies; open paths include both endpoints when greater than one.
 
-- [`closed`](PathPatternOptions.md#closed) · `boolean` · Optional
+- [`closed`](../geometry/PathPatternOptions.md#closed) · `boolean` · Optional
 
   Raw point closure defaults to false; a path value supplies closure and rejects conflicts.
 
-- [`orientation`](PathPatternOptions.md#orientation) · `"fixed"` \| `"tangent"` · Optional
+- [`orientation`](../geometry/PathPatternOptions.md#orientation) · `"fixed"` \| `"tangent"` · Optional
 
   Preserve orientation, or align local +X for Sections / +Z for Solids to the tangent. Defaults to fixed.
 
@@ -58,7 +58,7 @@ readonly [`Solid`](Solid.md)[]
 
 
 
-**pathPattern**(`source`: [`PatternSource`](PatternSource.md)\<[`Section`](Section.md)\>, `path`: [`Path2Input`](Path2Input.md), `options`: [`PathPatternOptions`](PathPatternOptions.md)): readonly [`Section`](Section.md)[]
+**pathPattern**(`source`: [`PatternSource`](PatternSource.md)\<[`Section`](Section.md)\>, `path`: [`Path2Input`](../geometry/Path2Input.md), `options`: [`PathPatternOptions`](../geometry/PathPatternOptions.md)): readonly [`Section`](Section.md)[]
 
 
 
@@ -75,23 +75,23 @@ to the path tangent counterclockwise, preserving the XY plane.
 
 <a id="path-1"></a>
 
-**`path`** · [`Path2Input`](Path2Input.md) · Required
+**`path`** · [`Path2Input`](../geometry/Path2Input.md) · Required
 
 
 
 <a id="options-1"></a>
 
-**`options`** · [`PathPatternOptions`](PathPatternOptions.md) · Required
+**`options`** · [`PathPatternOptions`](../geometry/PathPatternOptions.md) · Required
 
-- [`count`](PathPatternOptions.md#count) · `number` · Required
+- [`count`](../geometry/PathPatternOptions.md#count) · `number` · Required
 
   Positive number of copies; open paths include both endpoints when greater than one.
 
-- [`closed`](PathPatternOptions.md#closed) · `boolean` · Optional
+- [`closed`](../geometry/PathPatternOptions.md#closed) · `boolean` · Optional
 
   Raw point closure defaults to false; a path value supplies closure and rejects conflicts.
 
-- [`orientation`](PathPatternOptions.md#orientation) · `"fixed"` \| `"tangent"` · Optional
+- [`orientation`](../geometry/PathPatternOptions.md#orientation) · `"fixed"` \| `"tangent"` · Optional
 
   Preserve orientation, or align local +X for Sections / +Z for Solids to the tangent. Defaults to fixed.
 
@@ -104,17 +104,23 @@ readonly [`Section`](Section.md)[]
 
 ## Related APIs
 
-- [Path2Input](Path2Input.md)
-- [Path3Input](Path3Input.md)
-- [PathPatternOptions](PathPatternOptions.md)
+- [Path2Input](../geometry/Path2Input.md)
+- [Path3Input](../geometry/Path3Input.md)
+- [PathPatternOptions](../geometry/PathPatternOptions.md)
 - [PatternSource](PatternSource.md)
 - [Section](Section.md)
 - [Solid](Solid.md)
 
 ## Guides
 
-- [Named anchors and custom frames](../../guides/recipes.md#named-anchors-and-custom-frames)
-- [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
-- [Fluent values and standalone algorithms](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
+- [Named anchors and custom frames](../../guides/transforms-and-placement.md#named-anchors-and-custom-frames)
+- [Primitive booleans and repeated placement](../../guides/transforms-and-placement.md#primitive-booleans-and-repeated-placement)
+- [Fluent values and standalone algorithms](../../guides/geometry-values.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+## Supported imports
+
+```ts
+import { pathPattern } from "@metamesh/modeling";
+```
+
+Package: `@metamesh/modeling@0.19.0`.

package/dist/docs/reference/model/polygon.md

@@ -2,7 +2,7 @@
 
 Fills one closed millimetre XY outline, explicit outer/hole topology, or compound contours.
 
-**polygon**(`input`: [`Path2Input`](Path2Input.md) \| [`PolygonOptions`](PolygonOptions.md)): [`Section`](Section.md)
+**polygon**(`input`: [`Path2Input`](../geometry/Path2Input.md) \| [`PolygonOptions`](PolygonOptions.md)): [`Section`](Section.md)
 
 
 
@@ -19,7 +19,7 @@ Explicit topology must be simple and disjoint; compound winding may resolve over
 
 <a id="input"></a>
 
-**`input`** · [`Path2Input`](Path2Input.md) \| [`PolygonOptions`](PolygonOptions.md) · Required
+**`input`** · [`Path2Input`](../geometry/Path2Input.md) \| [`PolygonOptions`](PolygonOptions.md) · Required
 
 
 
@@ -30,14 +30,20 @@ Explicit topology must be simple and disjoint; compound winding may resolve over
 
 ## Related APIs
 
-- [Path2Input](Path2Input.md)
+- [Path2Input](../geometry/Path2Input.md)
 - [PolygonOptions](PolygonOptions.md)
 - [Section](Section.md)
 
 ## Guides
 
-- [Section, hole, offset, and extrusion](../../guides/recipes.md#section-hole-offset-and-extrusion)
-- [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
-- [Text and font variability](../../guides/concepts.md#text-and-font-variability)
+- [Section, hole, offset, and extrusion](../../guides/profiles-and-extrusion.md#section-hole-offset-and-extrusion)
+- [SVG sections: fills and strokes are different inputs](../../guides/svg-and-text.md#svg-sections-fills-and-strokes-are-different-inputs)
+- [Text and font variability](../../guides/svg-and-text.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.17.0`.
+## Supported imports
+
+```ts
+import { polygon } from "@metamesh/modeling";
+```
+
+Package: `@metamesh/modeling@0.19.0`.

package/dist/docs/reference/model/preflightInternalThreadCutter.md

@@ -2,7 +2,7 @@
 
 Checks compensated cutter dimensions and conservative mesh estimates against host output limits.
 
-**preflightInternalThreadCutter**(`options`: [`InternalThreadCutterOptions`](InternalThreadCutterOptions.md)): [`HelicalThreadSolidMeshPreflight`](HelicalThreadSolidMeshPreflight.md)
+**preflightInternalThreadCutter**(`options`: [`InternalThreadCutterOptions`](../geometry/InternalThreadCutterOptions.md)): [`ThreadSolidPreflight`](../geometry/ThreadSolidPreflight.md)
 
 
 
@@ -14,82 +14,80 @@ Mesh validity, native construction, and aggregate output limits are checked late
 
 <a id="options"></a>
 
-**`options`** · [`InternalThreadCutterOptions`](InternalThreadCutterOptions.md) · Required
+**`options`** · [`InternalThreadCutterOptions`](../geometry/InternalThreadCutterOptions.md) · Required
 
-- [`length`](InternalThreadCutterOptions.md#length) · `number` · Required
+- [`nominalMajorDiameter`](../geometry/InternalThreadCutterOptions.md#nominalmajordiameter) · `number` · Required
+
+  Nominal major diameter before female compensation and faceting correction.
+
+- [`length`](../geometry/InternalThreadCutterOptions.md#length) · `number` · Required
 
   Total threaded axial length in millimetres.
 
-- [`profile`](InternalThreadCutterOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
+- [`profile`](../geometry/InternalThreadCutterOptions.md#profile) · [`ThreadProfile`](../geometry/ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
-- [`nominalMajorDiameter`](InternalThreadCutterOptions.md#nominalmajordiameter) · `number` · Required
+- [`fit`](../geometry/InternalThreadCutterOptions.md#fit) · [`PrintableThreadFit`](../geometry/PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](../geometry/PrintableThreadFitPolicy.md) · Optional
 
-  Nominal major diameter before female compensation and faceting correction.
+  Printable fit or caller-calibrated allowances. Default: `normal`.
 
-- [`ends`](InternalThreadCutterOptions.md#ends) · [`ThreadEndTreatmentOptions`](ThreadEndTreatmentOptions.md) · Optional
+- [`bevel`](../geometry/InternalThreadCutterOptions.md#bevel) · [`Bevel`](../geometry/Bevel.md) · Optional
+
+  Bottom/top sizes in millimetres. Omitted disables both. Auto uses profile depth for standard/tapered ends,
+  or one sixth of the compensated male minor/female major radius for blunt ends.
+
+- [`ends`](../geometry/InternalThreadCutterOptions.md#ends) · [`ThreadEndTreatmentOptions`](../geometry/ThreadEndTreatmentOptions.md) · Optional
 
   Optional bottom/top ridge-end treatments. Standalone ridges honor the requested boundaries;
   BOSL2-style non-cut lead-in scaling is available on complete thread solids.
 
-- [`handedness`](InternalThreadCutterOptions.md#handedness) · [`ThreadHandedness`](ThreadHandedness.md) · Optional
+- [`handedness`](../geometry/InternalThreadCutterOptions.md#handedness) · [`ThreadHandedness`](../geometry/ThreadHandedness.md) · Optional
 
   Helix direction. Default: `right`.
 
-- [`limits`](InternalThreadCutterOptions.md#limits) · `Partial`\<[`ModelingLimits`](ModelingLimits.md)\> · Optional
+- [`limits`](../geometry/InternalThreadCutterOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
 
   Explicit output and circular allocation ceilings.
 
-- [`phase`](InternalThreadCutterOptions.md#phase) · `number` · Optional
+- [`phase`](../geometry/InternalThreadCutterOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
-- [`resolution`](InternalThreadCutterOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`resolution`](../geometry/InternalThreadCutterOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Optional circular-resolution policy.
 
-- [`starts`](InternalThreadCutterOptions.md#starts) · `number` · Optional
+- [`starts`](../geometry/InternalThreadCutterOptions.md#starts) · `number` · Optional
 
   Number of evenly phased starts. Default: `1`.
 
-- [`tolerance`](InternalThreadCutterOptions.md#tolerance) · [`GeometryToleranceOptions`](GeometryToleranceOptions.md) · Optional
+- [`tolerance`](../geometry/InternalThreadCutterOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
 
   Optional numerical tolerance overrides.
 
-- [`fit`](InternalThreadCutterOptions.md#fit) · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
-
-  Printable fit or caller-calibrated allowances. Default: `normal`.
-
-- [`bevelBottom`](InternalThreadCutterOptions.md#bevelbottom) · `boolean` · Optional
-
-  Apply a 45-degree bevel at Z=0.
-
-- [`bevelSize`](InternalThreadCutterOptions.md#bevelsize) · `number` · Optional
-
-  Axial bevel extent in millimetres. Active blunt ends default to one sixth of the compensated
-  male minor radius or female major radius; other ends default to the profile depth.
-
-- [`bevelTop`](InternalThreadCutterOptions.md#beveltop) · `boolean` · Optional
-
-  Apply a 45-degree bevel at Z=length.
-
 
 
 ## Returns
 
-[`HelicalThreadSolidMeshPreflight`](HelicalThreadSolidMeshPreflight.md)
+[`ThreadSolidPreflight`](../geometry/ThreadSolidPreflight.md)
 
 
 ## Related APIs
 
-- [HelicalThreadSolidMeshPreflight](HelicalThreadSolidMeshPreflight.md)
-- [InternalThreadCutterOptions](InternalThreadCutterOptions.md)
+- [InternalThreadCutterOptions](../geometry/InternalThreadCutterOptions.md)
+- [ThreadSolidPreflight](../geometry/ThreadSolidPreflight.md)
 - [internalThreadCutter](internalThreadCutter.md)
 
 ## Guides
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
-- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
+- [Preflight guarantees and host settings](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
+
+## Supported imports
+
+```ts
+import { preflightInternalThreadCutter } from "@metamesh/modeling";
+```
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.19.0`.

package/dist/docs/reference/model/preflightThreadedNut.md

@@ -2,7 +2,7 @@
 
 Checks nut dimensions, chamfers, end-face wall, and the extended compensated cutter's allocation plan.
 
-**preflightThreadedNut**(`options`: [`ThreadedNutOptions`](ThreadedNutOptions.md)): [`ThreadedNutPreflight`](ThreadedNutPreflight.md)
+**preflightThreadedNut**(`options`: [`ThreadedNutOptions`](../geometry/ThreadedNutOptions.md)): [`ThreadedNutPreflight`](../geometry/ThreadedNutPreflight.md)
 
 
 
@@ -14,93 +14,96 @@ Boolean result. Mesh validity, native construction, and aggregate output limits
 
 <a id="options"></a>
 
-**`options`** · [`ThreadedNutOptions`](ThreadedNutOptions.md) · Required
+**`options`** · [`ThreadedNutOptions`](../geometry/ThreadedNutOptions.md) · Required
 
-- [`profile`](ThreadedNutOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
-
-  Validated periodic profile repeated around the shaft.
-
-- [`nominalMajorDiameter`](ThreadedNutOptions.md#nominalmajordiameter) · `number` · Required
+- [`nominalMajorDiameter`](../geometry/ThreadedNutOptions.md#nominalmajordiameter) · `number` · Required
 
   Nominal major diameter before female compensation and faceting correction.
 
-- [`shape`](ThreadedNutOptions.md#shape) · [`ThreadedNutShape`](ThreadedNutShape.md) · Required
+- [`shape`](../geometry/ThreadedNutOptions.md#shape) · [`ThreadedNutShape`](../geometry/ThreadedNutShape.md) · Required
 
   Nut body shape.
 
-- [`thickness`](ThreadedNutOptions.md#thickness) · `number` · Required
+- [`thickness`](../geometry/ThreadedNutOptions.md#thickness) · `number` · Required
 
   Nut thickness along +Z in millimetres.
 
-- [`width`](ThreadedNutOptions.md#width) · `number` · Required
+- [`width`](../geometry/ThreadedNutOptions.md#width) · `number` · Required
 
   Across-flats width for hex/square or diameter for round, in millimetres.
 
-- [`ends`](ThreadedNutOptions.md#ends) · [`ThreadEndTreatmentOptions`](ThreadEndTreatmentOptions.md) · Optional
+- [`profile`](../geometry/ThreadedNutOptions.md#profile) · [`ThreadProfile`](../geometry/ThreadProfile-type.md) · Required
 
-  Optional bottom/top ridge-end treatments. Standalone ridges honor the requested boundaries;
-  BOSL2-style non-cut lead-in scaling is available on complete thread solids.
+  Validated periodic profile repeated around the shaft.
 
-- [`handedness`](ThreadedNutOptions.md#handedness) · [`ThreadHandedness`](ThreadHandedness.md) · Optional
+- [`fit`](../geometry/ThreadedNutOptions.md#fit) · [`PrintableThreadFit`](../geometry/PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](../geometry/PrintableThreadFitPolicy.md) · Optional
 
-  Helix direction. Default: `right`.
+  Printable fit or caller-calibrated allowances. Default: `normal`.
 
-- [`limits`](ThreadedNutOptions.md#limits) · `Partial`\<[`ModelingLimits`](ModelingLimits.md)\> · Optional
+- [`innerBevel`](../geometry/ThreadedNutOptions.md#innerbevel) · [`Bevel`](../geometry/Bevel.md) · Optional
 
-  Explicit output and circular allocation ceilings.
+  Opening bevels in [bottom, top] order. Omitted or auto uses min(profile.depth, thickness/4); zero disables.
 
-- [`phase`](ThreadedNutOptions.md#phase) · `number` · Optional
+- [`outerBevel`](../geometry/ThreadedNutOptions.md#outerbevel) · [`Bevel`](../geometry/Bevel.md) · Optional
 
-  Angular offset of the first start in degrees. Default: `0`.
+  Body bevels in [bottom, top] order. Omitted or auto uses min(profile.depth, thickness/4).
+  Use [0, "auto"] to keep the outside bottom flat without disabling its inner opening bevel.
 
-- [`resolution`](ThreadedNutOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`bodyResolution`](../geometry/ThreadedNutOptions.md#bodyresolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
-  Optional circular-resolution policy.
+  Optional physical policy for a round body, independent of the thread's matched facet grid.
 
-- [`starts`](ThreadedNutOptions.md#starts) · `number` · Optional
+- [`ends`](../geometry/ThreadedNutOptions.md#ends) · [`ThreadEndTreatmentOptions`](../geometry/ThreadEndTreatmentOptions.md) · Optional
 
-  Number of evenly phased starts. Default: `1`.
+  Optional bottom/top ridge-end treatments. Standalone ridges honor the requested boundaries;
+  BOSL2-style non-cut lead-in scaling is available on complete thread solids.
 
-- [`tolerance`](ThreadedNutOptions.md#tolerance) · [`GeometryToleranceOptions`](GeometryToleranceOptions.md) · Optional
+- [`handedness`](../geometry/ThreadedNutOptions.md#handedness) · [`ThreadHandedness`](../geometry/ThreadHandedness.md) · Optional
 
-  Optional numerical tolerance overrides.
+  Helix direction. Default: `right`.
 
-- [`fit`](ThreadedNutOptions.md#fit) · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
+- [`limits`](../geometry/ThreadedNutOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
 
-  Printable fit or caller-calibrated allowances. Default: `normal`.
+  Explicit output and circular allocation ceilings.
 
-- [`bevel`](ThreadedNutOptions.md#bevel) · [`ThreadedNutBevel`](ThreadedNutBevel.md) · Optional
+- [`phase`](../geometry/ThreadedNutOptions.md#phase) · `number` · Optional
 
-  Nut body bevel selection. Default: `automatic`.
+  Angular offset of the first start in degrees. Default: `0`.
 
-- [`bodyResolution`](ThreadedNutOptions.md#bodyresolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`resolution`](../geometry/ThreadedNutOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
-  Optional physical policy for a round body, independent of the thread's matched facet grid.
+  Optional circular-resolution policy.
 
-- [`chamferSize`](ThreadedNutOptions.md#chamfersize) · `number` · Optional
+- [`starts`](../geometry/ThreadedNutOptions.md#starts) · `number` · Optional
 
-  45-degree body chamfer extent. Default: `min(profile.depth, thickness/4)`.
+  Number of evenly phased starts. Default: `1`.
 
-- [`flushBuildPlateBottom`](ThreadedNutOptions.md#flushbuildplatebottom) · `boolean` · Optional
+- [`tolerance`](../geometry/ThreadedNutOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
 
-  Leave the bottom outside edge flat for build-plate adhesion. Default: `false`.
+  Optional numerical tolerance overrides.
 
 
 
 ## Returns
 
-[`ThreadedNutPreflight`](ThreadedNutPreflight.md)
+[`ThreadedNutPreflight`](../geometry/ThreadedNutPreflight.md)
 
 
 ## Related APIs
 
-- [ThreadedNutOptions](ThreadedNutOptions.md)
-- [ThreadedNutPreflight](ThreadedNutPreflight.md)
+- [ThreadedNutOptions](../geometry/ThreadedNutOptions.md)
+- [ThreadedNutPreflight](../geometry/ThreadedNutPreflight.md)
 - [threadedNut](threadedNut.md)
 
 ## Guides
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
-- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
+- [Preflight guarantees and host settings](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
+
+## Supported imports
+
+```ts
+import { preflightThreadedNut } from "@metamesh/modeling";
+```
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.19.0`.

package/dist/docs/reference/model/preflightThreadedRod.md

@@ -2,7 +2,7 @@
 
 Checks compensated rod dimensions and conservative mesh estimates against host output limits.
 
-**preflightThreadedRod**(`options`: [`ThreadedRodOptions`](ThreadedRodOptions.md)): [`HelicalThreadSolidMeshPreflight`](HelicalThreadSolidMeshPreflight.md)
+**preflightThreadedRod**(`options`: [`ThreadedRodOptions`](../geometry/ThreadedRodOptions.md)): [`ThreadSolidPreflight`](../geometry/ThreadSolidPreflight.md)
 
 
 
@@ -14,82 +14,80 @@ Mesh validity, native construction, and aggregate output limits are checked late
 
 <a id="options"></a>
 
-**`options`** · [`ThreadedRodOptions`](ThreadedRodOptions.md) · Required
+**`options`** · [`ThreadedRodOptions`](../geometry/ThreadedRodOptions.md) · Required
 
-- [`length`](ThreadedRodOptions.md#length) · `number` · Required
+- [`nominalMajorDiameter`](../geometry/ThreadedRodOptions.md#nominalmajordiameter) · `number` · Required
+
+  Nominal major diameter before male compensation.
+
+- [`length`](../geometry/ThreadedRodOptions.md#length) · `number` · Required
 
   Total threaded axial length in millimetres.
 
-- [`profile`](ThreadedRodOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
+- [`profile`](../geometry/ThreadedRodOptions.md#profile) · [`ThreadProfile`](../geometry/ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
-- [`nominalMajorDiameter`](ThreadedRodOptions.md#nominalmajordiameter) · `number` · Required
+- [`bevel`](../geometry/ThreadedRodOptions.md#bevel) · [`Bevel`](../geometry/Bevel.md) · Optional
 
-  Nominal major diameter before male compensation.
+  Bottom/top sizes in millimetres. Omitted disables both. Auto uses profile depth for standard/tapered ends,
+  or one sixth of the compensated male minor/female major radius for blunt ends.
 
-- [`ends`](ThreadedRodOptions.md#ends) · [`ThreadEndTreatmentOptions`](ThreadEndTreatmentOptions.md) · Optional
+- [`fit`](../geometry/ThreadedRodOptions.md#fit) · [`PrintableThreadFit`](../geometry/PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](../geometry/PrintableThreadFitPolicy.md) · Optional
+
+  Printable fit or caller-calibrated allowances. Default: `normal`.
+
+- [`ends`](../geometry/ThreadedRodOptions.md#ends) · [`ThreadEndTreatmentOptions`](../geometry/ThreadEndTreatmentOptions.md) · Optional
 
   Optional bottom/top ridge-end treatments. Standalone ridges honor the requested boundaries;
   BOSL2-style non-cut lead-in scaling is available on complete thread solids.
 
-- [`handedness`](ThreadedRodOptions.md#handedness) · [`ThreadHandedness`](ThreadHandedness.md) · Optional
+- [`handedness`](../geometry/ThreadedRodOptions.md#handedness) · [`ThreadHandedness`](../geometry/ThreadHandedness.md) · Optional
 
   Helix direction. Default: `right`.
 
-- [`limits`](ThreadedRodOptions.md#limits) · `Partial`\<[`ModelingLimits`](ModelingLimits.md)\> · Optional
+- [`limits`](../geometry/ThreadedRodOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
 
   Explicit output and circular allocation ceilings.
 
-- [`phase`](ThreadedRodOptions.md#phase) · `number` · Optional
+- [`phase`](../geometry/ThreadedRodOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
-- [`resolution`](ThreadedRodOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`resolution`](../geometry/ThreadedRodOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Optional circular-resolution policy.
 
-- [`starts`](ThreadedRodOptions.md#starts) · `number` · Optional
+- [`starts`](../geometry/ThreadedRodOptions.md#starts) · `number` · Optional
 
   Number of evenly phased starts. Default: `1`.
 
-- [`tolerance`](ThreadedRodOptions.md#tolerance) · [`GeometryToleranceOptions`](GeometryToleranceOptions.md) · Optional
+- [`tolerance`](../geometry/ThreadedRodOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
 
   Optional numerical tolerance overrides.
 
-- [`bevelBottom`](ThreadedRodOptions.md#bevelbottom) · `boolean` · Optional
-
-  Apply a 45-degree bevel at Z=0.
-
-- [`bevelSize`](ThreadedRodOptions.md#bevelsize) · `number` · Optional
-
-  Axial bevel extent in millimetres. Active blunt ends default to one sixth of the compensated
-  male minor radius or female major radius; other ends default to the profile depth.
-
-- [`bevelTop`](ThreadedRodOptions.md#beveltop) · `boolean` · Optional
-
-  Apply a 45-degree bevel at Z=length.
-
-- [`fit`](ThreadedRodOptions.md#fit) · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
-
-  Printable fit or caller-calibrated allowances. Default: `normal`.
-
 
 
 ## Returns
 
-[`HelicalThreadSolidMeshPreflight`](HelicalThreadSolidMeshPreflight.md)
+[`ThreadSolidPreflight`](../geometry/ThreadSolidPreflight.md)
 
 
 ## Related APIs
 
-- [HelicalThreadSolidMeshPreflight](HelicalThreadSolidMeshPreflight.md)
-- [ThreadedRodOptions](ThreadedRodOptions.md)
+- [ThreadedRodOptions](../geometry/ThreadedRodOptions.md)
+- [ThreadSolidPreflight](../geometry/ThreadSolidPreflight.md)
 - [threadedRod](threadedRod.md)
 
 ## Guides
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
-- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
+- [Preflight guarantees and host settings](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
+
+## Supported imports
+
+```ts
+import { preflightThreadedRod } from "@metamesh/modeling";
+```
 
-Package: `@metamesh/modeling@0.17.0`.
+Package: `@metamesh/modeling@0.19.0`.

package/dist/docs/reference/model/radialPattern.md

@@ -6,7 +6,7 @@ Repeats one solid about an axis.
 
 
 
-**radialPattern**(`source`: [`PatternSource`](PatternSource.md), `options`: [`RadialPatternOptions`](RadialPatternOptions.md)): readonly [`Solid`](Solid.md)[]
+**radialPattern**(`source`: [`PatternSource`](PatternSource.md), `options`: [`RadialPatternOptions`](../geometry/RadialPatternOptions.md)): readonly [`Solid`](Solid.md)[]
 
 
 
@@ -29,7 +29,7 @@ Repeats one solid about an axis.
 
 <a id="options"></a>
 
-**`options`** · [`RadialPatternOptions`](RadialPatternOptions.md) · Required
+**`options`** · [`RadialPatternOptions`](../geometry/RadialPatternOptions.md) · Required
 
 
 
@@ -41,7 +41,7 @@ readonly [`Solid`](Solid.md)[]
 
 
 
-**radialPattern**(`source`: [`PatternSource`](PatternSource.md)\<[`Section`](Section.md)\>, `options`: [`RadialPatternOptions`](RadialPatternOptions.md)\<`2`\>): readonly [`Section`](Section.md)[]
+**radialPattern**(`source`: [`PatternSource`](PatternSource.md)\<[`Section`](Section.md)\>, `options`: [`RadialPatternOptions`](../geometry/RadialPatternOptions.md)\<`2`\>): readonly [`Section`](Section.md)[]
 
 
 
@@ -57,7 +57,7 @@ Repeats a filled Section counterclockwise about a fixed XY pivot, using the impl
 
 <a id="options-1"></a>
 
-**`options`** · [`RadialPatternOptions`](RadialPatternOptions.md)\<`2`\> · Required
+**`options`** · [`RadialPatternOptions`](../geometry/RadialPatternOptions.md)\<`2`\> · Required
 
 
 
@@ -69,14 +69,20 @@ readonly [`Section`](Section.md)[]
 ## Related APIs
 
 - [PatternSource](PatternSource.md)
-- [RadialPatternOptions](RadialPatternOptions.md)
+- [RadialPatternOptions](../geometry/RadialPatternOptions.md)
 - [Section](Section.md)
 - [Solid](Solid.md)
 
 ## Guides
 
-- [Named anchors and custom frames](../../guides/recipes.md#named-anchors-and-custom-frames)
-- [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
-- [Fluent values and standalone algorithms](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
+- [Named anchors and custom frames](../../guides/transforms-and-placement.md#named-anchors-and-custom-frames)
+- [Primitive booleans and repeated placement](../../guides/transforms-and-placement.md#primitive-booleans-and-repeated-placement)
+- [Fluent values and standalone algorithms](../../guides/geometry-values.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.17.0`.
+## Supported imports
+
+```ts
+import { radialPattern } from "@metamesh/modeling";
+```
+
+Package: `@metamesh/modeling@0.19.0`.