@metamesh/modeling 0.15.0 → 0.17.0

package/dist/docs/reference/geometry/ThreadProfileSpec.md

@@ -16,4 +16,8 @@ Supported built-in and caller-defined thread profiles.
 - [TrapezoidalThreadProfileSpec](TrapezoidalThreadProfileSpec.md)
 - [TriangularThreadProfileSpec](TriangularThreadProfileSpec.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/ThreadRole.md

@@ -4,4 +4,11 @@ Whether compensation is being applied to an external or internal thread.
 
 **ThreadRole** = `"male"` \| `"female"`
 
-Package: `@metamesh/modeling@0.15.0`.
+
+
+
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/ThreadedNutBevel.md

@@ -4,4 +4,11 @@ Nut-edge bevel selection.
 
 **ThreadedNutBevel** = `"automatic"` \| `"both"` \| `"inside"` \| `"none"` \| `"outside"`
 
-Package: `@metamesh/modeling@0.15.0`.
+
+
+
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/ThreadedNutOptions.md

@@ -266,4 +266,8 @@ Across-flats width for hex/square or diameter for round, in millimetres.
 - [ThreadHandedness](ThreadHandedness.md)
 - [ThreadProfile](ThreadProfile-type.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/ThreadedNutPreflight.md

@@ -1,6 +1,6 @@
 # ThreadedNutPreflight
 
-Allocation-free body, cutter, and end-face facts resolved for a threaded nut.
+Resolved body and end-face dimensions plus conservative allocation estimates for the thread cutter.
 
 ## Properties
 
@@ -72,7 +72,7 @@ Smallest radial wall left between the body and cutter at either requested face.
 
 
 
-Conservative allocation facts for the exact extended internal-thread cutter mesh.
+Conservative allocation estimates for the extended cutter; excludes the body and Boolean result.
 
 ***
 
@@ -91,4 +91,8 @@ Start-aligned circular facet count used by the compensated thread cutter.
 
 - [HelicalThreadSolidMeshPreflight](HelicalThreadSolidMeshPreflight.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/ThreadedNutShape.md

@@ -4,4 +4,11 @@ Supported printable nut body shapes.
 
 **ThreadedNutShape** = `"hex"` \| `"round"` \| `"square"`
 
-Package: `@metamesh/modeling@0.15.0`.
+
+
+
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/ThreadedRodOptions.md

@@ -239,4 +239,8 @@ Nominal major diameter before male compensation.
 - [ThreadHandedness](ThreadHandedness.md)
 - [ThreadProfile](ThreadProfile-type.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/TorusOptions.md

@@ -102,4 +102,4 @@ Operation-level physical tessellation policy over the active model-wide policy.
 - [PrimitiveAttachment](PrimitiveAttachment.md)
 - [PrimitiveAttachmentOptions](PrimitiveAttachmentOptions.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/Transform2-type.md

@@ -208,11 +208,11 @@ Applies the inverse transpose and normalizes. Ignores translation; rejects zero
 
 ***
 
-### toMatrix()
+### toData()
 
 
 
-**toMatrix**(): [`Transform2Matrix`](Transform2Matrix.md)
+**toData**(): [`Transform2Data`](Transform2Data.md)
 
 
 
@@ -220,7 +220,7 @@ Returns the frozen canonical row-major 3x3 matrix for interchange.
 
 #### Returns
 
-[`Transform2Matrix`](Transform2Matrix.md)
+[`Transform2Data`](Transform2Data.md)
 
 ***
 
@@ -242,8 +242,8 @@ Embeds this placement in XYZ, leaving Z unchanged, for solids and 3D paths.
 ## Related APIs
 
 - [Pivot2Options](Pivot2Options.md)
+- [Transform2Data](Transform2Data.md)
 - [Transform2Input](Transform2Input.md)
-- [Transform2Matrix](Transform2Matrix.md)
 - [Transform3](Transform3-type.md)
 - [Vector2](Vector2-type.md)
 - [Vector2Input](Vector2Input.md)
@@ -251,5 +251,6 @@ Embeds this placement in XYZ, leaving Z unchanged, for solids and 3D paths.
 ## Guides
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+- [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.15.0`.
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/Transform2Data.md

@@ -0,0 +1,15 @@
+# Transform2Data
+
+A row-major affine 3x3 XY matrix applied to column vectors. Translation occupies indices 2 and 5; the final row is `[0, 0, 1]`.
+
+**Transform2Data** = readonly \[`m00`: `number`, `m01`: `number`, `m02`: `number`, `m10`: `number`, `m11`: `number`, `m12`: `number`, `m20`: `number`, `m21`: `number`, `m22`: `number`\]
+
+
+
+
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+- [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/Transform2Input.md

@@ -2,7 +2,7 @@
 
 An immutable XY transform or its canonical row-major matrix for interchange.
 
-**Transform2Input** = [`Transform2`](Transform2-type.md) \| [`Transform2Matrix`](Transform2Matrix.md)
+**Transform2Input** = [`Transform2`](Transform2-type.md) \| [`Transform2Data`](Transform2Data.md)
 
 
 
@@ -10,10 +10,11 @@ An immutable XY transform or its canonical row-major matrix for interchange.
 ## Related APIs
 
 - [Transform2](Transform2-type.md)
-- [Transform2Matrix](Transform2Matrix.md)
+- [Transform2Data](Transform2Data.md)
 
 ## Guides
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+- [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.15.0`.
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/Transform3-type.md

@@ -248,11 +248,11 @@ Applies the inverse transpose and normalizes. Ignores translation; rejects zero
 
 ***
 
-### toMatrix()
+### toData()
 
 
 
-**toMatrix**(): [`Transform3Matrix`](Transform3Matrix.md)
+**toData**(): [`Transform3Data`](Transform3Data.md)
 
 
 
@@ -260,7 +260,7 @@ Returns the frozen canonical row-major 4x4 matrix for interchange.
 
 #### Returns
 
-[`Transform3Matrix`](Transform3Matrix.md)
+[`Transform3Data`](Transform3Data.md)
 
 ***
 
@@ -283,13 +283,14 @@ Restricts to XY; throws GeometryError for a plane change or singular XY restrict
 
 - [Pivot3Options](Pivot3Options.md)
 - [Transform2](Transform2-type.md)
+- [Transform3Data](Transform3Data.md)
 - [Transform3Input](Transform3Input.md)
-- [Transform3Matrix](Transform3Matrix.md)
 - [Vector3](Vector3-type.md)
 - [Vector3Input](Vector3Input.md)
 
 ## Guides
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+- [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.15.0`.
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/Transform3Data.md

@@ -0,0 +1,18 @@
+# Transform3Data
+
+A row-major affine 4x4 matrix applied to column vectors.
+
+**Transform3Data** = readonly \[`m00`: `number`, `m01`: `number`, `m02`: `number`, `m03`: `number`, `m10`: `number`, `m11`: `number`, `m12`: `number`, `m13`: `number`, `m20`: `number`, `m21`: `number`, `m22`: `number`, `m23`: `number`, `m30`: `number`, `m31`: `number`, `m32`: `number`, `m33`: `number`\]
+
+
+
+Translation occupies indices 3, 7, and 11. The final row must be
+`[0, 0, 0, 1]` within the active geometry tolerance.
+
+
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+- [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/Transform3Input.md

@@ -2,7 +2,7 @@
 
 An immutable XYZ transform or its canonical row-major matrix for interchange.
 
-**Transform3Input** = [`Transform3`](Transform3-type.md) \| [`Transform3Matrix`](Transform3Matrix.md)
+**Transform3Input** = [`Transform3`](Transform3-type.md) \| [`Transform3Data`](Transform3Data.md)
 
 
 
@@ -10,10 +10,11 @@ An immutable XYZ transform or its canonical row-major matrix for interchange.
 ## Related APIs
 
 - [Transform3](Transform3-type.md)
-- [Transform3Matrix](Transform3Matrix.md)
+- [Transform3Data](Transform3Data.md)
 
 ## Guides
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+- [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.15.0`.
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/TrapezoidalThreadProfileSpec.md

@@ -89,4 +89,8 @@ Each flank uses half this angle from the radial direction; `90` gives 45-degree
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [ThreadProfileBaseSpec](ThreadProfileBaseSpec.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/TriangleMesh.md

@@ -31,4 +31,9 @@ Three unsigned vertex indices per triangle.
 
 Flat XYZ coordinates, three finite values per vertex.
 
-Package: `@metamesh/modeling@0.15.0`.
+
+## Guides
+
+- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/TriangleMeshAnalysis.md

@@ -36,7 +36,7 @@ Number of distinct indexed undirected edges when `includeTopology` is requested.
 
 
 
-`readonly` **bounds**: [`Bounds3`](Bounds3.md)
+`readonly` **bounds**: [`Bounds3Data`](Bounds3Data.md)
 
 
 
@@ -113,7 +113,11 @@ Number of distinct entries in the position buffer.
 
 ## Related APIs
 
-- [Bounds3](Bounds3.md)
+- [Bounds3Data](Bounds3Data.md)
 - [TriangleMeshMeasurements](TriangleMeshMeasurements.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+## Guides
+
+- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/TriangleMeshAnalysisOptions.md

@@ -72,4 +72,8 @@ Numeric comparison overrides used for zero-area triangle detection.
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [TriangleMeshValidationOptions](TriangleMeshValidationOptions.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+## Guides
+
+- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/TriangleMeshMeasurements.md

@@ -12,7 +12,7 @@ Geometric measurements derived from a validated, non-empty triangle mesh.
 
 
 
-`readonly` **bounds**: [`Bounds3`](Bounds3.md)
+`readonly` **bounds**: [`Bounds3Data`](Bounds3Data.md)
 
 
 
@@ -69,7 +69,11 @@ Number of distinct entries in the position buffer.
 
 ## Related APIs
 
-- [Bounds3](Bounds3.md)
+- [Bounds3Data](Bounds3Data.md)
 - [TriangleMeshAnalysis](TriangleMeshAnalysis.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+## Guides
+
+- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/TriangleMeshQualityOptions.md

@@ -36,4 +36,8 @@ Numeric comparison overrides; model coordinates are interpreted in their existin
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [PlanarMeshOptimizationOptions](PlanarMeshOptimizationOptions.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+## Guides
+
+- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/TriangleMeshQualityReport.md

@@ -187,4 +187,8 @@ Number of entries in the position buffer.
 
 - [PlanarPatchQuality](PlanarPatchQuality.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+## Guides
+
+- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/TriangleMeshSignature.md

@@ -8,7 +8,7 @@ Immutable deterministic measurements for a closed, oriented triangle mesh.
 
 
 
-`readonly` **bounds**: [`Bounds3`](Bounds3.md)
+`readonly` **bounds**: [`Bounds3Data`](Bounds3Data.md)
 
 
 
@@ -101,7 +101,11 @@ Number of referenced position-buffer vertices.
 
 ## Related APIs
 
-- [Bounds3](Bounds3.md)
+- [Bounds3Data](Bounds3Data.md)
 - [TriangleMeshSignatureTolerances](TriangleMeshSignatureTolerances.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+## Guides
+
+- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/TriangleMeshSignatureOptions.md

@@ -38,4 +38,9 @@ Position and bounds quantization in model units. Defaults to `1e-5`.
 
 Signed-volume quantization in cubic model units. Defaults to `1e-4`.
 
-Package: `@metamesh/modeling@0.15.0`.
+
+## Guides
+
+- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/TriangleMeshSignatureTolerances.md

@@ -26,4 +26,9 @@ Position and bounds quantization in model units.
 
 Signed-volume quantization in cubic model units.
 
-Package: `@metamesh/modeling@0.15.0`.
+
+## Guides
+
+- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/TriangleMeshValidationOptions.md

@@ -48,4 +48,8 @@ Numeric comparison overrides used for zero-area triangle detection.
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [TriangleMeshAnalysisOptions](TriangleMeshAnalysisOptions.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+## Guides
+
+- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/TriangularThreadProfileSpec.md

@@ -88,4 +88,8 @@ Root width divided by pitch.
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [ThreadProfileBaseSpec](ThreadProfileBaseSpec.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/TubeOptions.md

@@ -135,4 +135,4 @@ Outer radius in millimetres; greater than [TubeOptions.innerRadius](#innerradius
 - [PrimitiveAttachment](PrimitiveAttachment.md)
 - [PrimitiveAttachmentOptions](PrimitiveAttachmentOptions.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/Vector2-type.md

@@ -242,11 +242,11 @@ Returns Euclidean distance to another vector in the same coordinate units.
 
 ***
 
-### toArray()
+### toData()
 
 
 
-**toArray**(): [`Vector2Tuple`](Vector2Tuple.md)
+**toData**(): [`Vector2Data`](Vector2Data.md)
 
 
 
@@ -254,16 +254,17 @@ Returns this value's frozen readonly tuple for interchange; repeated calls do no
 
 #### Returns
 
-[`Vector2Tuple`](Vector2Tuple.md)
+[`Vector2Data`](Vector2Data.md)
 
 
 ## Related APIs
 
+- [Vector2Data](Vector2Data.md)
 - [Vector2Input](Vector2Input.md)
-- [Vector2Tuple](Vector2Tuple.md)
 
 ## Guides
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+- [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.15.0`.
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/Vector2Data.md

@@ -0,0 +1,15 @@
+# Vector2Data
+
+A two-dimensional Cartesian vector or point.
+
+**Vector2Data** = readonly \[`x`: `number`, `y`: `number`\]
+
+
+
+
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+- [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/Vector2Input.md

@@ -2,7 +2,7 @@
 
 An XY tuple or immutable fluent vector accepted by vector operations.
 
-**Vector2Input** = [`Vector2Tuple`](Vector2Tuple.md) \| [`Vector2`](Vector2-type.md)
+**Vector2Input** = [`Vector2Data`](Vector2Data.md) \| [`Vector2`](Vector2-type.md)
 
 
 
@@ -10,10 +10,11 @@ An XY tuple or immutable fluent vector accepted by vector operations.
 ## Related APIs
 
 - [Vector2](Vector2-type.md)
-- [Vector2Tuple](Vector2Tuple.md)
+- [Vector2Data](Vector2Data.md)
 
 ## Guides
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+- [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.15.0`.
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/Vector3-type.md

@@ -254,11 +254,11 @@ Returns Euclidean distance to another vector in the same coordinate units.
 
 ***
 
-### toArray()
+### toData()
 
 
 
-**toArray**(): [`Vector3Tuple`](Vector3Tuple.md)
+**toData**(): [`Vector3Data`](Vector3Data.md)
 
 
 
@@ -266,16 +266,17 @@ Returns this value's frozen readonly tuple for interchange; repeated calls do no
 
 #### Returns
 
-[`Vector3Tuple`](Vector3Tuple.md)
+[`Vector3Data`](Vector3Data.md)
 
 
 ## Related APIs
 
+- [Vector3Data](Vector3Data.md)
 - [Vector3Input](Vector3Input.md)
-- [Vector3Tuple](Vector3Tuple.md)
 
 ## Guides
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+- [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.15.0`.
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/Vector3Data.md

@@ -0,0 +1,15 @@
+# Vector3Data
+
+A three-dimensional Cartesian vector or point.
+
+**Vector3Data** = readonly \[`x`: `number`, `y`: `number`, `z`: `number`\]
+
+
+
+
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+- [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/Vector3Input.md

@@ -2,7 +2,7 @@
 
 An XYZ tuple or immutable fluent vector accepted by vector operations.
 
-**Vector3Input** = [`Vector3Tuple`](Vector3Tuple.md) \| [`Vector3`](Vector3-type.md)
+**Vector3Input** = [`Vector3Data`](Vector3Data.md) \| [`Vector3`](Vector3-type.md)
 
 
 
@@ -10,10 +10,11 @@ An XYZ tuple or immutable fluent vector accepted by vector operations.
 ## Related APIs
 
 - [Vector3](Vector3-type.md)
-- [Vector3Tuple](Vector3Tuple.md)
+- [Vector3Data](Vector3Data.md)
 
 ## Guides
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+- [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.15.0`.
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/VectorTextArcBaseline.md

@@ -50,4 +50,9 @@ Alignment datum in degrees counterclockwise from +X; defaults to 90.
 
 Reading direction around the circle; defaults to clockwise.
 
-Package: `@metamesh/modeling@0.15.0`.
+
+## Guides
+
+- [SVG preflight work and guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/VectorTextLayout.md

@@ -36,4 +36,8 @@ Exact measurements of these paths and their logical text layout.
 - [FittedTextLayout](FittedTextLayout.md)
 - [VectorTextMetrics](VectorTextMetrics.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+## Guides
+
+- [SVG preflight work and guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.

package/dist/docs/reference/geometry/VectorTextLayoutOptions.md

@@ -12,7 +12,7 @@ Text bounded to 512 UTF-16 units: horizontal lines or one circular line without
 
 
 
-`readonly` `optional` **align?**: `"left"` \| `"right"` \| `"center"`
+`readonly` `optional` **align?**: `"center"` \| `"left"` \| `"right"`
 
 
 
@@ -48,7 +48,7 @@ Baseline spacing in ems, 0.5–5; omitted uses the selected face's natural verti
 
 
 
-`readonly` `optional` **verticalAlign?**: `"top"` \| `"bottom"` \| `"center"` \| `"baseline"`
+`readonly` `optional` **verticalAlign?**: `"center"` \| `"top"` \| `"bottom"` \| `"baseline"`
 
 
 
@@ -108,4 +108,8 @@ Tracking between glyph clusters in millimetres, -100–100; defaults to zero.
 - [VectorTextArcBaseline](VectorTextArcBaseline.md)
 - [VectorTextOptions](VectorTextOptions.md)
 
-Package: `@metamesh/modeling@0.15.0`.
+## Guides
+
+- [SVG preflight work and guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.17.0`.