@mento-protocol/mento-sdk 3.2.6 → 3.2.7

package/dist/core/types/tradingLimits.d.ts

@@ -1,91 +0,0 @@
-/**
- * Human-friendly representation of a trading limit.
- * Used by frontends to display limit status and calculate remaining capacity.
- */
-export interface TradingLimit {
-    /** Token address this limit applies to */
-    asset: string;
-    /** Maximum amount that can flow IN (raw value - V1: 0 decimals, V2: 15 decimals) */
-    maxIn: bigint;
-    /** Maximum amount that can flow OUT (raw value - V1: 0 decimals, V2: 15 decimals) */
-    maxOut: bigint;
-    /** Unix timestamp when this limit window resets */
-    until: number;
-    /** Token decimals for consumer scaling */
-    decimals: number;
-}
-/**
- * Trading limits configuration for V1 (Broker/Virtual pools).
- * Uses configurable timeframes and 0 decimal precision.
- */
-export interface TradingLimitsConfigV1 {
-    /** Time window in seconds for L0 limit */
-    timestep0: number;
-    /** Time window in seconds for L1 limit */
-    timestep1: number;
-    /** L0 limit value (0 decimal precision) */
-    limit0: bigint;
-    /** L1 limit value (0 decimal precision) */
-    limit1: bigint;
-    /** Global limit value (0 decimal precision) */
-    limitGlobal: bigint;
-    /** Flags bitmap: bit 0=L0, bit 1=L1, bit 2=LG */
-    flags: number;
-}
-/**
- * Trading limits state for V1 (Broker/Virtual pools).
- */
-export interface TradingLimitsStateV1 {
-    /** Timestamp of last L0 window reset */
-    lastUpdated0: number;
-    /** Timestamp of last L1 window reset */
-    lastUpdated1: number;
-    /** Current netflow for L0 (0 decimal precision) */
-    netflow0: bigint;
-    /** Current netflow for L1 (0 decimal precision) */
-    netflow1: bigint;
-    /** Current global netflow (0 decimal precision) */
-    netflowGlobal: bigint;
-}
-/**
- * Trading limits configuration for V2 (FPMM pools).
- * Uses fixed timeframes (5 min for L0, 1 day for L1) and 15 decimal precision.
- */
-export interface TradingLimitsConfigV2 {
-    /** L0 limit value (15 decimal precision) */
-    limit0: bigint;
-    /** L1 limit value (15 decimal precision) */
-    limit1: bigint;
-    /** Token decimals */
-    decimals: number;
-}
-/**
- * Trading limits state for V2 (FPMM pools).
- */
-export interface TradingLimitsStateV2 {
-    /** Timestamp of last L0 window reset */
-    lastUpdated0: number;
-    /** Timestamp of last L1 window reset */
-    lastUpdated1: number;
-    /** Current netflow for L0 (15 decimal precision) */
-    netflow0: bigint;
-    /** Current netflow for L1 (15 decimal precision) */
-    netflow1: bigint;
-}
-/**
- * Combined tradability status for a pool.
- * Separates circuit breaker and trading limits for distinct UI messaging.
- */
-export interface PoolTradabilityStatus {
-    /** Overall tradability (circuitBreakerOk AND limitsOk) */
-    tradable: boolean;
-    /** Circuit breaker status - true if not tripped */
-    circuitBreakerOk: boolean;
-    /** Raw trading mode value (0 = BIDIRECTIONAL, non-zero = suspended) */
-    tradingMode: number;
-    /** Trading limits status - true if limits not exhausted */
-    limitsOk: boolean;
-    /** Detailed limit info for UI display */
-    limits: TradingLimit[];
-}
-//# sourceMappingURL=tradingLimits.d.ts.map

package/dist/core/types/tradingLimits.js

@@ -1,3 +0,0 @@
-"use strict";
-Object.defineProperty(exports, "__esModule", { value: true });
-//# sourceMappingURL=tradingLimits.js.map

package/dist/core/types/tradingMode.d.ts

@@ -1,24 +0,0 @@
-/**
- * Trading modes for rate feeds in the BreakerBox circuit breaker.
- *
- * The BreakerBox uses a bitmask approach where multiple breakers can
- * contribute to the final trading mode. In practice:
- * - 0 = Bidirectional (trading enabled)
- * - Any non-zero value = Trading suspended
- *
- * For SDK consumers, use isTradingEnabled() helper to check if trading
- * is allowed.
- */
-export declare enum TradingMode {
-    /** Bidirectional trading is enabled (normal operation) */
-    BIDIRECTIONAL = 0,
-    /** Trading is suspended (circuit breaker tripped) - any non-zero value */
-    SUSPENDED = 1
-}
-/**
- * Check if trading is enabled for a given trading mode.
- * @param mode - The trading mode value from BreakerBox
- * @returns true if trading is enabled (mode === 0)
- */
-export declare function isTradingEnabled(mode: number): boolean;
-//# sourceMappingURL=tradingMode.d.ts.map

package/dist/core/types/tradingMode.js

@@ -1,31 +0,0 @@
-"use strict";
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.TradingMode = void 0;
-exports.isTradingEnabled = isTradingEnabled;
-/**
- * Trading modes for rate feeds in the BreakerBox circuit breaker.
- *
- * The BreakerBox uses a bitmask approach where multiple breakers can
- * contribute to the final trading mode. In practice:
- * - 0 = Bidirectional (trading enabled)
- * - Any non-zero value = Trading suspended
- *
- * For SDK consumers, use isTradingEnabled() helper to check if trading
- * is allowed.
- */
-var TradingMode;
-(function (TradingMode) {
-    /** Bidirectional trading is enabled (normal operation) */
-    TradingMode[TradingMode["BIDIRECTIONAL"] = 0] = "BIDIRECTIONAL";
-    /** Trading is suspended (circuit breaker tripped) - any non-zero value */
-    TradingMode[TradingMode["SUSPENDED"] = 1] = "SUSPENDED";
-})(TradingMode || (exports.TradingMode = TradingMode = {}));
-/**
- * Check if trading is enabled for a given trading mode.
- * @param mode - The trading mode value from BreakerBox
- * @returns true if trading is enabled (mode === 0)
- */
-function isTradingEnabled(mode) {
-    return mode === TradingMode.BIDIRECTIONAL;
-}
-//# sourceMappingURL=tradingMode.js.map

package/dist/core/types/transaction.d.ts

@@ -1,45 +0,0 @@
-export interface ContractCallOptions {
-    address: string;
-    abi: string[] | unknown[];
-    functionName: string;
-    args?: unknown[];
-}
-/**
- * Contract write options for building call parameters
- *
- * Configuration for building transaction call parameters for write operations.
- * These parameters can be used by consumers to execute transactions themselves.
- */
-export interface ContractWriteOptions extends ContractCallOptions {
-    /**
-     * Optional gas limit override
-     * If not provided, will be estimated automatically
-     */
-    gasLimit?: bigint;
-    /**
-     * Transaction value in wei
-     * For payable functions only
-     */
-    value?: bigint;
-}
-/**
- * Call parameters for executing a contract transaction
- *
- * Contains all the data needed to execute a contract call.
- * Consumers can use these parameters with their own wallet/signer to execute transactions.
- */
-export interface CallParams {
-    /**
-     * Contract address to call
-     */
-    to: string;
-    /**
-     * Encoded function call data (hex string)
-     */
-    data: string;
-    /**
-     * Transaction value in wei (hex string with 0x prefix)
-     */
-    value: string;
-}
-//# sourceMappingURL=transaction.d.ts.map

package/dist/core/types/transaction.js

@@ -1,3 +0,0 @@
-"use strict";
-Object.defineProperty(exports, "__esModule", { value: true });
-//# sourceMappingURL=transaction.js.map