@memoarchitect/ontology 0.7.0 → 0.8.24

package/examples/gpca-pump/model/catalog/gpca_architecture.sysml

@@ -1,11 +1,17 @@
 package memo_examples_gpca_pump_gpca_architecture {
+    private import memo_examples_gpca_pump_gpca_requirements::*;
+    private import memo_examples_sysml_diagram_samples_viewpoints_unassigned_views_requirements_view::*;
     private import ScalarValues::*;
 
     private import memo_architecture_implementation_hardware_structure::*;
     private import memo_architecture_implementation_software_structure::*;
     private import memo_architecture_logical_structure::*;
+    private import memo_architecture_logical_interfaces::*;
+    private import memo_architecture_realization_physical::*;
     private import memo_core_relationships::*;
     private import memo_core_enumerations::*;
+    private import memo_core_common::*;
+    private import memo_core_dimensions::*;
 
     // ── Logical components ──────────────────────────────────────
     part lcTherapyControl : LogicalComponent {
@@ -44,6 +50,10 @@ package memo_examples_gpca_pump_gpca_architecture {
         attribute :>> safetyPartition = "supporting partition";
     }
 
+    // Native SysML message: the safety monitor's alarm notification is a flow
+    // between the two logical components, not an opaque InteractionMessage.
+    message alarmNotification of LogicalExchangeItem from lcSafetyMonitoring to lcOperatorInterface;
+
     // ── Device (UMN AADL architectural model) ───────────────────
     // The AADL top-level `GPCA_Device` system. GPCA_Device.Impl declares only
     // GPCA_HW_Sensors, GPCA_SW, and GPCA_HW_Actuators as subcomponents.
@@ -53,22 +63,226 @@ package memo_examples_gpca_pump_gpca_architecture {
         attribute :>> responsibility = "AADL device boundary containing the sensor wrapper, GPCA software, and actuator wrapper.";
         attribute :>> safetyRole = "device boundary carrying the intended use and the risk-control architecture";
         attribute :>> partNumber = "GPCA-DEV-001";
-    }
 
-    // ── Hardware: aggregates (UMN AADL architectural model) ─────
-    part gpcaDeviceSensors : HardwareAssembly {
-        attribute :>> id = "HW-001";
-        attribute :>> name = "GPCA_HW_Sensors";
-        attribute :>> responsibility = "Map inputs to software-visible signals.";
-        attribute :>> safetyRole = "input acquisition";
-    }
-    part gpcaActuators : HardwareAssembly {
-        attribute :>> id = "HW-002";
-        attribute :>> name = "GPCA_HW_Actuators";
-        attribute :>> responsibility = "Expose software outputs to physical outputs.";
-        attribute :>> safetyRole = "actuation and operator output";
+        in port devOpCmdIn : PhysicalPort { attribute :>> id = "PORT-DEV-01"; attribute :>> name = "OP_CMD_IN"; attribute :>> sourceReference = "CITE-002: GPCA_Device.aadl"; }
+        in port devDbIn : PhysicalPort { attribute :>> id = "PORT-DEV-02"; attribute :>> name = "DB_IN"; attribute :>> sourceReference = "CITE-002: GPCA_Device.aadl"; }
+        in port devPresIn : PhysicalPort { attribute :>> id = "PORT-DEV-03"; attribute :>> name = "PRES_IN"; attribute :>> sourceReference = "CITE-002: GPCA_Device.aadl"; }
+        in port devPatientIn : PhysicalPort { attribute :>> id = "PORT-DEV-04"; attribute :>> name = "PATIENT_IN"; attribute :>> sourceReference = "CITE-002: GPCA_Device.aadl"; }
+        out port devGpcaOut : PhysicalPort { attribute :>> id = "PORT-DEV-05"; attribute :>> name = "GPCA_OUT"; attribute :>> sourceReference = "CITE-002: GPCA_Device.aadl"; }
+
+        part gpcaDeviceSensors : HardwareAssembly {
+            attribute :>> id = "HW-001";
+            attribute :>> name = "GPCA_HW_Sensors";
+            attribute :>> responsibility = "Map inputs to software-visible signals.";
+            attribute :>> safetyRole = "input acquisition";
+
+            in port snsOpCmdIn : PhysicalPort { attribute :>> id = "PORT-SNS-01"; attribute :>> name = "OP_CMD_IN"; attribute :>> sourceReference = "CITE-002: GPCA_HW_Sensors.aadl"; }
+            in port snsDbIn : PhysicalPort { attribute :>> id = "PORT-SNS-02"; attribute :>> name = "DB_IN"; attribute :>> sourceReference = "CITE-002: GPCA_HW_Sensors.aadl"; }
+            in port snsPresIn : PhysicalPort { attribute :>> id = "PORT-SNS-03"; attribute :>> name = "PRES_IN"; attribute :>> sourceReference = "CITE-002: GPCA_HW_Sensors.aadl"; }
+            in port snsPatientIn : PhysicalPort { attribute :>> id = "PORT-SNS-04"; attribute :>> name = "PATIENT_IN"; attribute :>> sourceReference = "CITE-002: GPCA_HW_Sensors.aadl"; }
+            out port snsOpCmdOut : PhysicalPort { attribute :>> id = "PORT-SNS-05"; attribute :>> name = "OP_CMD_OUT"; attribute :>> sourceReference = "CITE-002: GPCA_HW_Sensors.aadl"; }
+            out port snsPresOut : PhysicalPort { attribute :>> id = "PORT-SNS-06"; attribute :>> name = "PRES_OUT"; attribute :>> sourceReference = "CITE-002: GPCA_HW_Sensors.aadl"; }
+            out port snsPatientOut : PhysicalPort { attribute :>> id = "PORT-SNS-07"; attribute :>> name = "PATIENT_OUT"; attribute :>> sourceReference = "CITE-002: GPCA_HW_Sensors.aadl"; }
+            out port snsSensorOut : PhysicalPort { attribute :>> id = "PORT-SNS-08"; attribute :>> name = "SENSOR_OUT"; attribute :>> sourceReference = "CITE-002: GPCA_HW_Sensors.aadl"; }
+            out port snsConstOut : PhysicalPort { attribute :>> id = "PORT-SNS-09"; attribute :>> name = "CONST_OUT"; attribute :>> sourceReference = "CITE-002: GPCA_HW_Sensors.aadl"; }
+            out port snsDbOut : PhysicalPort { attribute :>> id = "PORT-SNS-10"; attribute :>> name = "DB_OUT"; attribute :>> sourceReference = "CITE-002: GPCA_HW_Sensors.aadl"; }
+        }
+
+        part gpcaActuators : HardwareAssembly {
+            attribute :>> id = "HW-002";
+            attribute :>> name = "GPCA_HW_Actuators";
+            attribute :>> responsibility = "Expose software outputs to physical outputs.";
+            attribute :>> safetyRole = "actuation and operator output";
+
+            in port actGpcaSwIn : PhysicalPort { attribute :>> id = "PORT-ACT-01"; attribute :>> name = "GPCA_SW_IN"; attribute :>> sourceReference = "CITE-002: GPCA_HW_Actuators.aadl"; }
+            out port actGpcaOut : PhysicalPort { attribute :>> id = "PORT-ACT-02"; attribute :>> name = "GPCA_OUT"; attribute :>> sourceReference = "CITE-002: GPCA_HW_Actuators.aadl"; }
+        }
+
+        part gpcaSoftware : SoftwareSystem {
+            attribute :>> id = "SWS-001";
+            attribute :>> name = "GPCA_Software";
+            attribute :>> version = "2.0";
+            attribute :>> lifecycleState = LifecycleStateKind::development;
+            attribute :>> safetyClass = SafetyClassKind::C;
+            attribute :>> complexity = ComplexityKind::high;
+            attribute :>> operatingSystem = "synchronous data-flow execution; AADL immediate port semantics (source specifies no timing)";
+
+            in port portOpCmdIn : SoftwarePort {
+                attribute :>> id = "PORT-01"; attribute :>> name = "OP_CMD_IN";
+                attribute :>> description = "Operator commands (System_Start/Stop, Infusion_Initiate/Inhibit, Notification_Cancel, Disable/Enable_Audio, DataConfig) from the data entry interface (I 2).";
+                attribute :>> portKind = InterfaceKind::control;
+                attribute :>> dataTypeName = "DATATYPES::Operator_Commands.Impl";
+                attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (GPCA_SW.Impl)";
+            }
+            in port portPresIn : SoftwarePort {
+                attribute :>> id = "PORT-02"; attribute :>> name = "PRES_IN";
+                attribute :>> description = "Prescription data entry fields (I 1, 13 fields PatientID_prog..NumberMax_pbolus_prog).";
+                attribute :>> portKind = InterfaceKind::data;
+                attribute :>> dataTypeName = "DATATYPES::Prescription_Inputs.Impl";
+                attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (GPCA_SW.Impl)";
+            }
+            in port portPatientIn : SoftwarePort {
+                attribute :>> id = "PORT-03"; attribute :>> name = "PATIENT_IN";
+                attribute :>> description = "Patient bolus request (I 4, BolusRequest_prog).";
+                attribute :>> portKind = InterfaceKind::userInteraction;
+                attribute :>> dataTypeName = "DATATYPES::Patient_Inputs.Impl";
+                attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (GPCA_SW.Impl)";
+            }
+            in port portSensorIn : SoftwarePort {
+                attribute :>> id = "PORT-04"; attribute :>> name = "SENSOR_IN";
+                attribute :>> description = "Device sensor inputs (air-in-line, occlusion, door, reservoir, flow).";
+                attribute :>> portKind = InterfaceKind::digitalSignal;
+                attribute :>> dataTypeName = "DATATYPES::Device_Sensor_Inputs.Impl";
+                attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (GPCA_SW.Impl)";
+            }
+            in port portConstIn : SoftwarePort {
+                attribute :>> id = "PORT-05"; attribute :>> name = "CONST_IN";
+                attribute :>> description = "Device configuration constants (App. A.4 values such as Empty_Reservoir, tolerances).";
+                attribute :>> portKind = InterfaceKind::data;
+                attribute :>> dataTypeName = "DATATYPES::Device_Configuration_Inputs.Impl";
+                attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (GPCA_SW.Impl)";
+            }
+            in port portDbIn : SoftwarePort {
+                attribute :>> id = "PORT-06"; attribute :>> name = "DB_IN";
+                attribute :>> description = "Hospital pharmacy database safe values (I 9-I 11); realizes SI-005 HospitalPharmacyDatabaseInterface.";
+                attribute :>> portKind = InterfaceKind::data;
+                attribute :>> dataTypeName = "DATATYPES::Drug_Database_Inputs.Impl";
+                attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (GPCA_SW.Impl)";
+            }
+            out port portGpcaSwOut : SoftwarePort {
+                attribute :>> id = "PORT-07"; attribute :>> name = "GPCA_SW_OUT";
+                attribute :>> description = "Aggregated software output vector (Current_System_Mode, Commanded_Flow_Rate, notifications, prescription echo, status).";
+                attribute :>> portKind = InterfaceKind::data;
+                attribute :>> dataTypeName = "DATATYPES::GPCA_SW_Outputs.Impl";
+                attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (GPCA_SW.Impl)";
+            }
+
+        part tlm : SoftwareModule {
+            attribute :>> id = "SW-001";
+            attribute :>> name = "Top_Level_Mode";
+            attribute :>> responsibility = "Ensure system ON/OFF behavior and startup/shutdown checks.";
+            attribute :>> safetyClass = SafetyClassKind::C;
+            attribute :>> complexity = ComplexityKind::medium;
+
+            in port portTlmConstIn : SoftwarePort { attribute :>> id = "PORT-TLM-01"; attribute :>> name = "CONST_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (TLM)"; }
+            in port portTlmOpCmdIn : SoftwarePort { attribute :>> id = "PORT-TLM-02"; attribute :>> name = "OP_CMD_IN"; attribute :>> portKind = InterfaceKind::control; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (TLM)"; }
+            out port portTlmTlmModeOut : SoftwarePort { attribute :>> id = "PORT-TLM-03"; attribute :>> name = "TLM_MODE_OUT"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (TLM)"; }
+        }
+
+        part config : SoftwareModule {
+            attribute :>> id = "SW-002";
+            attribute :>> name = "Config";
+            attribute :>> responsibility = "Prescription entry, drug-library limit checking, confirmation, and persistent storage.";
+            attribute :>> safetyClass = SafetyClassKind::C;
+            attribute :>> complexity = ComplexityKind::high;
+
+            out port portConfigConfigOut : SoftwarePort { attribute :>> id = "PORT-CFG-01"; attribute :>> name = "CONFIG_OUT"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (CONFIG)"; }
+            in port portConfigConstIn : SoftwarePort { attribute :>> id = "PORT-CFG-02"; attribute :>> name = "CONST_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (CONFIG)"; }
+            in port portConfigDbIn : SoftwarePort { attribute :>> id = "PORT-CFG-03"; attribute :>> name = "DB_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (CONFIG)"; }
+            in port portConfigOpCmdIn : SoftwarePort { attribute :>> id = "PORT-CFG-04"; attribute :>> name = "OP_CMD_IN"; attribute :>> portKind = InterfaceKind::control; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (CONFIG)"; }
+            in port portConfigPresIn : SoftwarePort { attribute :>> id = "PORT-CFG-05"; attribute :>> name = "PRES_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (CONFIG)"; }
+            in port portConfigSysStatIn : SoftwarePort { attribute :>> id = "PORT-CFG-06"; attribute :>> name = "SYS_STAT_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (CONFIG)"; }
+            in port portConfigTlmModeIn : SoftwarePort { attribute :>> id = "PORT-CFG-07"; attribute :>> name = "TLM_MODE_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (CONFIG)"; }
+        }
+
+        part alarm : SoftwareModule {
+            attribute :>> id = "SW-003";
+            attribute :>> name = "Alarm";
+            attribute :>> responsibility = "Monitor and notify exceptional conditions.";
+            attribute :>> safetyClass = SafetyClassKind::C;
+            attribute :>> complexity = ComplexityKind::high;
+
+            out port portAlarmAlarmOut : SoftwarePort { attribute :>> id = "PORT-ALM-01"; attribute :>> name = "ALARM_OUT"; attribute :>> portKind = InterfaceKind::notification; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (ALARM)"; }
+            in port portAlarmConfigIn : SoftwarePort { attribute :>> id = "PORT-ALM-02"; attribute :>> name = "CONFIG_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (ALARM)"; }
+            in port portAlarmConstIn : SoftwarePort { attribute :>> id = "PORT-ALM-03"; attribute :>> name = "CONST_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (ALARM)"; }
+            in port portAlarmDbIn : SoftwarePort { attribute :>> id = "PORT-ALM-04"; attribute :>> name = "DB_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (ALARM)"; }
+            in port portAlarmImIn : SoftwarePort { attribute :>> id = "PORT-ALM-05"; attribute :>> name = "IM_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (ALARM)"; }
+            in port portAlarmOpCmdIn : SoftwarePort { attribute :>> id = "PORT-ALM-06"; attribute :>> name = "OP_CMD_IN"; attribute :>> portKind = InterfaceKind::control; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (ALARM)"; }
+            in port portAlarmSensorIn : SoftwarePort { attribute :>> id = "PORT-ALM-07"; attribute :>> name = "SENSOR_IN"; attribute :>> portKind = InterfaceKind::digitalSignal; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (ALARM)"; }
+            in port portAlarmSysMonIn : SoftwarePort { attribute :>> id = "PORT-ALM-08"; attribute :>> name = "SYS_MON_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (ALARM)"; }
+            in port portAlarmSysStatIn : SoftwarePort { attribute :>> id = "PORT-ALM-09"; attribute :>> name = "SYS_STAT_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (ALARM)"; }
+            in port portAlarmTlmModeIn : SoftwarePort { attribute :>> id = "PORT-ALM-10"; attribute :>> name = "TLM_MODE_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (ALARM)"; }
+        }
+
+        part logging : SoftwareModule {
+            attribute :>> id = "SW-004";
+            attribute :>> name = "Logging";
+            attribute :>> responsibility = "Append-only event log of doses, mode changes, alarms, and configuration changes.";
+            attribute :>> safetyClass = SafetyClassKind::B;
+            attribute :>> complexity = ComplexityKind::medium;
+
+            in port portLogAlarmIn : SoftwarePort { attribute :>> id = "PORT-LOG-01"; attribute :>> name = "ALARM_IN"; attribute :>> portKind = InterfaceKind::notification; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (LOG)"; }
+            in port portLogConfigIn : SoftwarePort { attribute :>> id = "PORT-LOG-02"; attribute :>> name = "CONFIG_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (LOG)"; }
+            in port portLogImIn : SoftwarePort { attribute :>> id = "PORT-LOG-03"; attribute :>> name = "IM_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (LOG)"; }
+            out port portLogLogOut : SoftwarePort { attribute :>> id = "PORT-LOG-04"; attribute :>> name = "LOG_OUT"; attribute :>> portKind = InterfaceKind::logging; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (LOG)"; }
+            in port portLogSysStatIn : SoftwarePort { attribute :>> id = "PORT-LOG-05"; attribute :>> name = "SYS_STAT_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (LOG)"; }
+            in port portLogTlmModeIn : SoftwarePort { attribute :>> id = "PORT-LOG-06"; attribute :>> name = "TLM_MODE_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (LOG)"; }
+        }
+
+        part infusionMgr : SoftwareModule {
+            attribute :>> id = "SW-005";
+            attribute :>> name = "Infusion_Manager";
+            attribute :>> responsibility = "Handle drug infusion commands and therapy parameters.";
+            attribute :>> safetyClass = SafetyClassKind::C;
+            attribute :>> complexity = ComplexityKind::high;
+
+            in port portImAlarmIn : SoftwarePort { attribute :>> id = "PORT-IM-01"; attribute :>> name = "ALARM_IN"; attribute :>> portKind = InterfaceKind::notification; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (IM)"; }
+            in port portImConfigIn : SoftwarePort { attribute :>> id = "PORT-IM-02"; attribute :>> name = "CONFIG_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (IM)"; }
+            out port portImImOut : SoftwarePort { attribute :>> id = "PORT-IM-03"; attribute :>> name = "IM_OUT"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (IM)"; }
+            in port portImOpCmdIn : SoftwarePort { attribute :>> id = "PORT-IM-04"; attribute :>> name = "OP_CMD_IN"; attribute :>> portKind = InterfaceKind::control; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (IM)"; }
+            in port portImPatientIn : SoftwarePort { attribute :>> id = "PORT-IM-05"; attribute :>> name = "PATIENT_IN"; attribute :>> portKind = InterfaceKind::userInteraction; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (IM)"; }
+            in port portImSysStatIn : SoftwarePort { attribute :>> id = "PORT-IM-06"; attribute :>> name = "SYS_STAT_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (IM)"; }
+            in port portImTlmModeIn : SoftwarePort { attribute :>> id = "PORT-IM-07"; attribute :>> name = "TLM_MODE_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (IM)"; }
+        }
+
+        part systemMonitor : SoftwareModule {
+            attribute :>> id = "SW-006";
+            attribute :>> name = "System_Monitor";
+            attribute :>> responsibility = "POST, periodic CPU/RAM/ROM checks, watchdog kicking, and battery supervision.";
+            attribute :>> safetyClass = SafetyClassKind::C;
+            attribute :>> complexity = ComplexityKind::medium;
+
+            out port portSysMonSysMonOut : SoftwarePort { attribute :>> id = "PORT-MON-01"; attribute :>> name = "SYS_MON_OUT"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (SYS_MON)"; }
+            in port portSysMonTlmModeIn : SoftwarePort { attribute :>> id = "PORT-MON-02"; attribute :>> name = "TLM_MODE_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (SYS_MON)"; }
+        }
+
+        part systemStatus : SoftwareModule {
+            attribute :>> id = "SW-007";
+            attribute :>> name = "System_Status";
+            attribute :>> responsibility = "Maintain the shared system status vector (Reservoir_Volume, Volume_Infused, Reservoir_Empty, In_Therapy) consumed by Alarm, Config, and Infusion_Manager.";
+            attribute :>> safetyClass = SafetyClassKind::C;
+            attribute :>> complexity = ComplexityKind::medium;
+            attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/System_Status.aadl";
+
+            in port portSysStatConfigIn : SoftwarePort { attribute :>> id = "PORT-STAT-01"; attribute :>> name = "CONFIG_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (SYS_STAT)"; }
+            in port portSysStatConstIn : SoftwarePort { attribute :>> id = "PORT-STAT-02"; attribute :>> name = "CONST_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (SYS_STAT)"; }
+            in port portSysStatImIn : SoftwarePort { attribute :>> id = "PORT-STAT-03"; attribute :>> name = "IM_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (SYS_STAT)"; }
+            in port portSysStatSensorIn : SoftwarePort { attribute :>> id = "PORT-STAT-04"; attribute :>> name = "SENSOR_IN"; attribute :>> portKind = InterfaceKind::digitalSignal; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (SYS_STAT)"; }
+            out port portSysStatSysStatOut : SoftwarePort { attribute :>> id = "PORT-STAT-05"; attribute :>> name = "SYS_STAT_OUT"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (SYS_STAT)"; }
+            in port portSysStatTlmModeIn : SoftwarePort { attribute :>> id = "PORT-STAT-06"; attribute :>> name = "TLM_MODE_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (SYS_STAT)"; }
+        }
+
+        part outputBus : SoftwareModule {
+            attribute :>> id = "SW-008";
+            attribute :>> name = "OutputBus";
+            attribute :>> responsibility = "Aggregate all subsystem outputs into the single GPCA_SW_OUT output vector (mode, commanded flow rate, notifications, prescription echo, status).";
+            attribute :>> safetyClass = SafetyClassKind::C;
+            attribute :>> complexity = ComplexityKind::low;
+            attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/OutputBus.aadl";
+
+            in port portOutputAlarmIn : SoftwarePort { attribute :>> id = "PORT-OUT-01"; attribute :>> name = "ALARM_IN"; attribute :>> portKind = InterfaceKind::notification; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (OUTPUT)"; }
+            in port portOutputConfigIn : SoftwarePort { attribute :>> id = "PORT-OUT-02"; attribute :>> name = "CONFIG_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (OUTPUT)"; }
+            out port portOutputGpcaSwOut : SoftwarePort { attribute :>> id = "PORT-OUT-03"; attribute :>> name = "GPCA_SW_OUT"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (OUTPUT)"; }
+            in port portOutputImIn : SoftwarePort { attribute :>> id = "PORT-OUT-04"; attribute :>> name = "IM_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (OUTPUT)"; }
+            in port portOutputLogIn : SoftwarePort { attribute :>> id = "PORT-OUT-05"; attribute :>> name = "LOG_IN"; attribute :>> portKind = InterfaceKind::logging; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (OUTPUT)"; }
+            in port portOutputSysMonIn : SoftwarePort { attribute :>> id = "PORT-OUT-06"; attribute :>> name = "SYS_MON_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (OUTPUT)"; }
+            in port portOutputSysStatIn : SoftwarePort { attribute :>> id = "PORT-OUT-07"; attribute :>> name = "SYS_STAT_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (OUTPUT)"; }
+            in port portOutputTlmModeIn : SoftwarePort { attribute :>> id = "PORT-OUT-08"; attribute :>> name = "TLM_MODE_IN"; attribute :>> portKind = InterfaceKind::data; attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/GPCA_SW.aadl (OUTPUT)"; }
+        }
+        }
     }
 
+    // ── Hardware: aggregates (UMN AADL architectural model) ─────
     // ── Hardware: sensor suite ──────────────────────────────────
     part airInLineSensor : HardwareAssembly {
         attribute :>> id = "HW-006";
@@ -191,92 +405,120 @@ package memo_examples_gpca_pump_gpca_architecture {
         attribute :>> partNumber = "GPCA-MECH-ENC";
     }
 
-    // ── Software system and components (UMN behavioral model) ───
-    part gpcaSoftware : SoftwareSystem {
-        attribute :>> id = "SWS-001";
-        attribute :>> name = "GPCA_Software";
-        attribute :>> version = "2.0";
-        attribute :>> lifecycleState = LifecycleStateKind::development;
-        attribute :>> safetyClass = SafetyClassKind::C;
-        attribute :>> complexity = ComplexityKind::high;
-        attribute :>> operatingSystem = "synchronous data-flow execution; AADL immediate port semantics (source specifies no timing)";
-    }
-    part tlm : SoftwareModule {
-        attribute :>> id = "SW-001";
-        attribute :>> name = "Top_Level_Mode";
-        attribute :>> responsibility = "Ensure system ON/OFF behavior and startup/shutdown checks.";
-        attribute :>> safetyClass = SafetyClassKind::C;
-        attribute :>> complexity = ComplexityKind::medium;
-    }
-    part config : SoftwareModule {
-        attribute :>> id = "SW-002";
-        attribute :>> name = "Config";
-        attribute :>> responsibility = "Prescription entry, drug-library limit checking, confirmation, and persistent storage.";
-        attribute :>> safetyClass = SafetyClassKind::C;
-        attribute :>> complexity = ComplexityKind::high;
-    }
-    part alarm : SoftwareModule {
-        attribute :>> id = "SW-003";
-        attribute :>> name = "Alarm";
-        attribute :>> responsibility = "Monitor and notify exceptional conditions.";
-        attribute :>> safetyClass = SafetyClassKind::C;
-        attribute :>> complexity = ComplexityKind::high;
-    }
-    part logging : SoftwareModule {
-        attribute :>> id = "SW-004";
-        attribute :>> name = "Logging";
-        attribute :>> responsibility = "Append-only event log of doses, mode changes, alarms, and configuration changes.";
-        attribute :>> safetyClass = SafetyClassKind::B;
-        attribute :>> complexity = ComplexityKind::medium;
-    }
-    part infusionMgr : SoftwareModule {
-        attribute :>> id = "SW-005";
-        attribute :>> name = "Infusion_Manager";
-        attribute :>> responsibility = "Handle drug infusion commands and therapy parameters.";
-        attribute :>> safetyClass = SafetyClassKind::C;
-        attribute :>> complexity = ComplexityKind::high;
-    }
-    part systemMonitor : SoftwareModule {
-        attribute :>> id = "SW-006";
-        attribute :>> name = "System_Monitor";
-        attribute :>> responsibility = "POST, periodic CPU/RAM/ROM checks, watchdog kicking, and battery supervision.";
-        attribute :>> safetyClass = SafetyClassKind::C;
-        attribute :>> complexity = ComplexityKind::medium;
-    }
-    part systemStatus : SoftwareModule {
-        attribute :>> id = "SW-007";
-        attribute :>> name = "System_Status";
-        attribute :>> responsibility = "Maintain the shared system status vector (Reservoir_Volume, Volume_Infused, Reservoir_Empty, In_Therapy) consumed by Alarm, Config, and Infusion_Manager.";
-        attribute :>> safetyClass = SafetyClassKind::C;
-        attribute :>> complexity = ComplexityKind::medium;
-        attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/System_Status.aadl";
-    }
-    part outputBus : SoftwareModule {
-        attribute :>> id = "SW-008";
-        attribute :>> name = "OutputBus";
-        attribute :>> responsibility = "Aggregate all subsystem outputs into the single GPCA_SW_OUT output vector (mode, commanded flow rate, notifications, prescription echo, status).";
-        attribute :>> safetyClass = SafetyClassKind::C;
-        attribute :>> complexity = ComplexityKind::low;
-        attribute :>> sourceReference = "CITE-002: CriSys GPCA AADL v2.0, packages/OutputBus.aadl";
-    }
-
     // ── Structural composition ──────────────────────────────────
     // Device level (GPCA_Device.aadl): the assemblies and the software system
-    // the device is built from.
-    connection : Composes connect parent ::> gpcaDevice to child ::> gpcaDeviceSensors;
-    connection : Composes connect parent ::> gpcaDevice to child ::> gpcaActuators;
-    connection : Composes connect parent ::> gpcaDevice to child ::> gpcaSoftware;
-
-    // The physical parts below are MEMO design extensions derived from system
-    // requirements and hazard analysis, not subcomponents in the published
-    // AADL packages. They intentionally remain outside this AADL composition
-    // until a project authority defines their interfaces and ownership.
-    connection : Composes connect parent ::> gpcaSoftware to child ::> tlm;
-    connection : Composes connect parent ::> gpcaSoftware to child ::> config;
-    connection : Composes connect parent ::> gpcaSoftware to child ::> alarm;
-    connection : Composes connect parent ::> gpcaSoftware to child ::> logging;
-    connection : Composes connect parent ::> gpcaSoftware to child ::> infusionMgr;
-    connection : Composes connect parent ::> gpcaSoftware to child ::> systemMonitor;
-    connection : Composes connect parent ::> gpcaSoftware to child ::> systemStatus;
-    connection : Composes connect parent ::> gpcaSoftware to child ::> outputBus;
+    // are nested directly in gpcaDevice's body above, native containment
+    // instead of a Composes edge. The software modules (MEMO design
+    // extensions derived from system requirements and hazard analysis, not
+    // subcomponents in the published AADL packages) are nested the same way,
+    // inside gpcaSoftware's own body.
+    satisfy reqCs01 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs01 by gpcaDevice.gpcaSoftware.outputBus;
+    satisfy reqCs18 by gpcaDevice.gpcaSoftware.systemStatus;
+    satisfy reqCs23 by gpcaDevice.gpcaSoftware.systemStatus;
+    satisfy reqCs25 by gpcaDevice.gpcaSoftware.infusionMgr;
+    satisfy reqCs19 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqDrugLibraryLimits by gpcaDevice.gpcaSoftware.config;
+    satisfy reqCs09 by gpcaDevice.gpcaSoftware.config;
+    satisfy reqPowerLossRetention by gpcaDevice.gpcaSoftware.config;
+    satisfy reqPost by gpcaDevice.gpcaSoftware.systemMonitor;
+    satisfy reqWatchdogSafeState by gpcaDevice.gpcaSoftware.systemMonitor;
+    satisfy reqWatchdogSafeState by controllerBoard;
+    satisfy reqCs59 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs72 by audibleAlarm;
+    satisfy reqCs73 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs75 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs21 by airInLineSensor;
+    satisfy reqCs21 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqOcclusion by occlusionSensor;
+    satisfy reqOcclusion by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs23 by reservoirSensor;
+    satisfy reqCs23 by gpcaDevice.gpcaSoftware.infusionMgr;
+    satisfy reqDoorOpen by doorSensor;
+    satisfy reqDoorOpen by gpcaDevice.gpcaSoftware.infusionMgr;
+    satisfy reqMaxHourlyDose by gpcaDevice.gpcaSoftware.infusionMgr;
+    satisfy reqStuckButton by gpcaDevice.gpcaSoftware.infusionMgr;
+    satisfy reqFlowCrossCheck by flowSensor;
+    satisfy reqFlowCrossCheck by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs77 by gpcaDevice.gpcaSoftware.logging;
+    satisfy reqCs78 by gpcaDevice.gpcaSoftware.logging;
+    satisfy reqEventLogging by gpcaDevice.gpcaSoftware.logging;
+    satisfy reqCs02 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs03 by gpcaDevice.gpcaSoftware.infusionMgr;
+    satisfy reqCs04 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs05 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs06 by gpcaDevice.gpcaSoftware.infusionMgr;
+    satisfy reqCs07 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs08 by gpcaDevice.gpcaSoftware.config;
+    satisfy reqCs10 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs11 by gpcaDevice.gpcaSoftware.logging;
+    satisfy reqCs12 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs13 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs14 by gpcaDevice.gpcaSoftware.infusionMgr;
+    satisfy reqCs15 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs16 by gpcaDevice.gpcaSoftware.infusionMgr;
+    satisfy reqCs17 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs18 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs20 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs22 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs24 by gpcaDevice.gpcaSoftware.infusionMgr;
+    satisfy reqCs26 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs27 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs28 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs29 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs30 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs31 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs32 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs33 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs34 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs35 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs36 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs37 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs38 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs39 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs40 by gpcaDevice.gpcaSoftware.infusionMgr;
+    satisfy reqCs41 by gpcaDevice.gpcaSoftware.infusionMgr;
+    satisfy reqCs42 by gpcaDevice.gpcaSoftware.infusionMgr;
+    satisfy reqCs43 by gpcaDevice.gpcaSoftware.infusionMgr;
+    satisfy reqCs44 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs45 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs46 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs47 by gpcaDevice.gpcaSoftware.tlm;
+    satisfy reqCs48 by gpcaDevice.gpcaSoftware.config;
+    satisfy reqCs49 by gpcaDevice.gpcaSoftware.config;
+    satisfy reqCs50 by gpcaDevice.gpcaSoftware.config;
+    satisfy reqCs51 by gpcaDevice.gpcaSoftware.config;
+    satisfy reqCs52 by gpcaDevice.gpcaSoftware.config;
+    satisfy reqCs53 by gpcaDevice.gpcaSoftware.config;
+    satisfy reqCs54 by gpcaDevice.gpcaSoftware.config;
+    satisfy reqCs55 by gpcaDevice.gpcaSoftware.config;
+    satisfy reqCs56 by gpcaDevice.gpcaSoftware.config;
+    satisfy reqCs57 by gpcaDevice.gpcaSoftware.config;
+    satisfy reqCs58 by gpcaDevice.gpcaSoftware.config;
+    satisfy reqCs60 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs61 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs62 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs63 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs64 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs65 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs66 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs67 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs68 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs69 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs70 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs71 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs74 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs76 by gpcaDevice.gpcaSoftware.alarm;
+    satisfy reqCs79 by gpcaDevice.gpcaSoftware.logging;
+    satisfy reqCs80 by gpcaDevice.gpcaSoftware.logging;
+    satisfy reqCs81 by gpcaDevice.gpcaSoftware.logging;
+    satisfy reqCs82 by gpcaDevice.gpcaSoftware.config;
+    satisfy reqCs83 by enclosure;
+    satisfy reqCs84 by enclosure;
+    satisfy reqCs85 by gpcaDevice.gpcaSoftware.logging;
+    satisfy reqCs86 by gpcaDevice.gpcaSoftware.config;
+    satisfy reqPumpAccuracy by pumpMotorAssembly;
+    satisfy reqAlarmLoudness by audibleAlarm;
+    satisfy reqBatteryBackup by batteryPack;
+    satisfy reqFreeFlowPrevention by antiFreeFlowValve;
 }

package/examples/gpca-pump/model/catalog/gpca_behavior_actions.sysml

@@ -3,6 +3,9 @@ package memo_examples_gpca_pump_gpca_behavior_actions {
     private import memo_examples_gpca_pump_gpca_architecture::*;
 
     private import memo_architecture_functional_behavior::*;
+    private import memo_core_common::*;
+    private import memo_core_relationships::*;
+    private import memo_examples_gpca_pump_gpca_behavior_subsystems::*;
     private import memo_architecture_logical_interfaces::*;
     private import memo_core_enumerations::*;
 
@@ -33,27 +36,27 @@ package memo_examples_gpca_pump_gpca_behavior_actions {
         attribute :>> itemKind = InterfaceItemKind::'event';
     }
 
-    action def AcquireSensorData {
+    action def AcquireSensorData :> FunctionalAction {
         out sensorStatus : SensorStatusVector;
     }
-    action def EvaluateAlarmConditions {
+    action def EvaluateAlarmConditions :> FunctionalAction {
         in sensorStatus : SensorStatusVector;
         out alarmSignal : AlarmSignal;
     }
-    action def EnforceDoseLimits {
+    action def EnforceDoseLimits :> FunctionalAction {
         in bolusRequest : BolusRequestSignal;
         out authorizedBolus : BolusRequestSignal;
     }
-    action def ComputeFlowCommand {
+    action def ComputeFlowCommand :> FunctionalAction {
         in alarmSignal : AlarmSignal;
         in authorizedBolus : BolusRequestSignal;
         out flowCommand : FlowCommand;
     }
-    action def ActuatePumpMotor {
+    action def ActuatePumpMotor :> FunctionalAction {
         in flowCommand : FlowCommand;
         out actuation : FlowCommand;
     }
-    action def LogTherapyEvent {
+    action def LogTherapyEvent :> FunctionalAction {
         in actuation : FlowCommand;
         out eventRecord : TherapyEventRecord;
     }
@@ -83,10 +86,21 @@ package memo_examples_gpca_pump_gpca_behavior_actions {
     }
 
     // ── Swimlane allocation to the logical architecture ─────────
-    allocate infusionDeliveryFlow.acquireSensors to gpcaDeviceSensors;
-    allocate infusionDeliveryFlow.evaluateAlarms to alarm;
-    allocate infusionDeliveryFlow.enforceLimits to infusionMgr;
-    allocate infusionDeliveryFlow.computeFlow to infusionMgr;
+    allocate infusionDeliveryFlow.acquireSensors to gpcaDevice.gpcaDeviceSensors;
+    allocate infusionDeliveryFlow.evaluateAlarms to gpcaDevice.gpcaSoftware.alarm;
+    allocate infusionDeliveryFlow.enforceLimits to gpcaDevice.gpcaSoftware.infusionMgr;
+    allocate infusionDeliveryFlow.computeFlow to gpcaDevice.gpcaSoftware.infusionMgr;
     allocate infusionDeliveryFlow.actuateMotor to pumpMotorAssembly;
-    allocate infusionDeliveryFlow.logEvent to logging;
+    allocate infusionDeliveryFlow.logEvent to gpcaDevice.gpcaSoftware.logging;
+
+    // ── Functional decomposition and component allocation ───────
+    // FUNC-001 "AcquireSensorData" is what the SYSTEM is answerable for.
+    // Decomposing it names who is answerable for each piece: the flowmeter for
+    // the flow rate, the air detector for air in line, the sensor subassembly
+    // for the aggregated vector — native nesting in gpca_behavior_subsystems.
+    // AllocatedTo carries the ownership, a different statement from
+    // containment, which is what CR-ONT-075 keeps apart.
+    allocate fnAcquireSensors.cfnMeasureFlowRate to flowSensor;
+    allocate fnAcquireSensors.cfnDetectAirInLine to airInLineSensor;
+    allocate fnAcquireSensors.cfnAggregateSensorStatus to gpcaDevice.gpcaDeviceSensors;
 }