@memnexus-ai/mx-agent-cli 0.1.263 → 0.1.265

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
@@ -3,6 +3,83 @@
3
3
  # Logs sync failures to the local startup JSONL so they are visible at next session start.
4
4
  # FAIL-OPEN: always exits 0 regardless of sync outcome.
5
5
 
6
+ MXHT_HOOK=observability-sync MXHT_EVENT=Stop MXHT_TOOL=-
7
+ # >>> SHARED hook-timing probe v1
8
+ # Diagnostic instrumentation: records how long THIS hook ran, so hook time can be
9
+ # separated from time spent waiting on the API when a session stalls mid-stream.
10
+ # Appends one line to a local, gitignored log. Read it with
11
+ # mx-agent-system/scripts/hook-timing-report.sh. Nothing is transmitted anywhere.
12
+ #
13
+ # FAIL SILENT IS DELIBERATE HERE, and it is the opposite of this repo's usual
14
+ # fail-loud direction. Do not "correct" it to fail-loud by applying the fleet
15
+ # default. A diagnostic that can break the gate it observes is worse than no
16
+ # diagnostic: an unwritable path or a full disk would otherwise take out every
17
+ # guard on the PreToolUse path at once. Every step below is guarded and every
18
+ # failure path is a silent no-op that leaves the hook's behaviour untouched.
19
+ #
20
+ # NEAR-ZERO OVERHEAD: bash builtins only on the hot path ($EPOCHREALTIME, printf
21
+ # -T, one read, one append). No subprocess, no network, no JSON parsing, and the
22
+ # hook's stdin is never touched (the hook owns it). mkdir runs at most once per
23
+ # worktree. Kill switch: MX_HOOK_TIMING=0.
24
+ MXHT_T0="${EPOCHREALTIME:-}"
25
+ _mxht_emit() {
26
+ [ -z "${MXHT_DONE:-}" ] || return 0 # an ERR trap that exits fires EXIT too
27
+ MXHT_DONE=1
28
+ [ "${MX_HOOK_TIMING:-1}" != "0" ] || return 0
29
+ [ -n "${MXHT_T0:-}" ] && [ -n "${EPOCHREALTIME:-}" ] || return 0
30
+ local root="${CLAUDE_PROJECT_DIR:-${CLAUDE_WORKTREE_PATH:-}}"
31
+ [ -n "$root" ] && [ -d "$root" ] || return 0
32
+ local dir="$root/.mx-hook-timing"
33
+ [ -d "$dir" ] || mkdir -p "$dir" 2>/dev/null || return 0
34
+ # EPOCHREALTIME is seconds.microseconds; the separator is locale-dependent, so
35
+ # strip both forms and subtract as plain integer microseconds.
36
+ local dur=-1
37
+ { dur=$(( ${EPOCHREALTIME//[.,]/} - ${MXHT_T0//[.,]/} )); } 2>/dev/null
38
+ [ "$dur" -ge 0 ] 2>/dev/null || return 0
39
+ local stamp hour
40
+ printf -v stamp '%(%Y-%m-%d %H:%M:%S)T' -1
41
+ printf -v hour '%(%H)T' -1
42
+ # BOUNDED BY CONSTRUCTION: a 24-slot ring, one file per hour-of-day, so the log
43
+ # is at most 24 files each holding one hour of this machine's hook calls. The
44
+ # first writer into a slot on a new day truncates it instead of appending —
45
+ # detected by reading the slot's first line, which is a builtin read (no stat,
46
+ # no rm, no find, no cron). Two writers can race that truncation and lose a
47
+ # line or two at an hour boundary; that is acceptable for a sampling diagnostic.
48
+ local f="$dir/h$hour.log" first="" line
49
+ # THE SLOT MUST BE AN ORDINARY FILE, OR NOT EXIST YET (security review, #4848).
50
+ # Anything else is a silent no-op. Two concrete failures if this check is
51
+ # dropped: a FIFO at the slot makes the `read` below block until the hook's
52
+ # settings.json timeout kills it, and a PreToolUse guard killed that way loses
53
+ # its exit 2 — the command it meant to block then runs; a symlink at the slot
54
+ # sends the day-rollover truncation onto the symlink's target. The `-e || -L`
55
+ # wrapper is what lets a not-yet-created slot through (-e is false for a
56
+ # dangling symlink, so -L is needed to catch that case too).
57
+ if [ -e "$f" ] || [ -L "$f" ]; then
58
+ [ -f "$f" ] && [ ! -L "$f" ] || return 0
59
+ fi
60
+ [ -r "$f" ] && { read -r first < "$f"; } 2>/dev/null
61
+ printf -v line '%s dur_us=%s hook=%s event=%s ppid=%s tool=%s\n' \
62
+ "$stamp" "$dur" "${MXHT_HOOK:--}" "${MXHT_EVENT:--}" "$PPID" "${MXHT_TOOL:--}"
63
+ # One printf of ~90 bytes to an O_APPEND fd is atomic under PIPE_BUF, so
64
+ # concurrent hooks cannot interleave partial lines.
65
+ # The 2>/dev/null wraps the GROUP, not the printf: a failing redirection is
66
+ # reported by the shell before an inner 2>/dev/null would be in effect, and a
67
+ # "Permission denied" on stderr from a PreToolUse hook is surfaced to the model.
68
+ if [ "${first%% *}" = "${stamp%% *}" ]; then
69
+ { printf '%s' "$line" >>"$f"; } 2>/dev/null
70
+ else
71
+ { printf '%s' "$line" >"$f"; } 2>/dev/null
72
+ fi
73
+ }
74
+ # `|| :` IS LOAD-BEARING — do not simplify to `trap _mxht_emit EXIT`. The hooks
75
+ # this block is inlined into run under `set -e`, and the EXIT trap runs with
76
+ # errexit still in force. Without `|| :`, a non-zero return from the probe — the
77
+ # final printf failing on an unwritable slot is the reachable case — replaces the
78
+ # hook's own exit status: a PreToolUse guard's exit 2 becomes exit 1, which the
79
+ # harness reads as "error", not "block", so the command it meant to block runs.
80
+ # Pinned verbatim by hook-timing-parity.test.sh.
81
+ trap '_mxht_emit || :' EXIT
82
+ # <<< SHARED hook-timing probe v1
6
83
 
7
84
 
8
85
  set -euo pipefail
@@ -46,6 +46,85 @@
46
46
  # by the party it guards. Precedent: 6f934aaee removed the same affordance from
47
47
  # the override audit log.
48
48
 
49
+ MXHT_HOOK=session-idle-gate MXHT_EVENT=Stop MXHT_TOOL=-
50
+ # >>> SHARED hook-timing probe v1
51
+ # Diagnostic instrumentation: records how long THIS hook ran, so hook time can be
52
+ # separated from time spent waiting on the API when a session stalls mid-stream.
53
+ # Appends one line to a local, gitignored log. Read it with
54
+ # mx-agent-system/scripts/hook-timing-report.sh. Nothing is transmitted anywhere.
55
+ #
56
+ # FAIL SILENT IS DELIBERATE HERE, and it is the opposite of this repo's usual
57
+ # fail-loud direction. Do not "correct" it to fail-loud by applying the fleet
58
+ # default. A diagnostic that can break the gate it observes is worse than no
59
+ # diagnostic: an unwritable path or a full disk would otherwise take out every
60
+ # guard on the PreToolUse path at once. Every step below is guarded and every
61
+ # failure path is a silent no-op that leaves the hook's behaviour untouched.
62
+ #
63
+ # NEAR-ZERO OVERHEAD: bash builtins only on the hot path ($EPOCHREALTIME, printf
64
+ # -T, one read, one append). No subprocess, no network, no JSON parsing, and the
65
+ # hook's stdin is never touched (the hook owns it). mkdir runs at most once per
66
+ # worktree. Kill switch: MX_HOOK_TIMING=0.
67
+ MXHT_T0="${EPOCHREALTIME:-}"
68
+ _mxht_emit() {
69
+ [ -z "${MXHT_DONE:-}" ] || return 0 # an ERR trap that exits fires EXIT too
70
+ MXHT_DONE=1
71
+ [ "${MX_HOOK_TIMING:-1}" != "0" ] || return 0
72
+ [ -n "${MXHT_T0:-}" ] && [ -n "${EPOCHREALTIME:-}" ] || return 0
73
+ local root="${CLAUDE_PROJECT_DIR:-${CLAUDE_WORKTREE_PATH:-}}"
74
+ [ -n "$root" ] && [ -d "$root" ] || return 0
75
+ local dir="$root/.mx-hook-timing"
76
+ [ -d "$dir" ] || mkdir -p "$dir" 2>/dev/null || return 0
77
+ # EPOCHREALTIME is seconds.microseconds; the separator is locale-dependent, so
78
+ # strip both forms and subtract as plain integer microseconds.
79
+ local dur=-1
80
+ { dur=$(( ${EPOCHREALTIME//[.,]/} - ${MXHT_T0//[.,]/} )); } 2>/dev/null
81
+ [ "$dur" -ge 0 ] 2>/dev/null || return 0
82
+ local stamp hour
83
+ printf -v stamp '%(%Y-%m-%d %H:%M:%S)T' -1
84
+ printf -v hour '%(%H)T' -1
85
+ # BOUNDED BY CONSTRUCTION: a 24-slot ring, one file per hour-of-day, so the log
86
+ # is at most 24 files each holding one hour of this machine's hook calls. The
87
+ # first writer into a slot on a new day truncates it instead of appending —
88
+ # detected by reading the slot's first line, which is a builtin read (no stat,
89
+ # no rm, no find, no cron). Two writers can race that truncation and lose a
90
+ # line or two at an hour boundary; that is acceptable for a sampling diagnostic.
91
+ local f="$dir/h$hour.log" first="" line
92
+ # THE SLOT MUST BE AN ORDINARY FILE, OR NOT EXIST YET (security review, #4848).
93
+ # Anything else is a silent no-op. Two concrete failures if this check is
94
+ # dropped: a FIFO at the slot makes the `read` below block until the hook's
95
+ # settings.json timeout kills it, and a PreToolUse guard killed that way loses
96
+ # its exit 2 — the command it meant to block then runs; a symlink at the slot
97
+ # sends the day-rollover truncation onto the symlink's target. The `-e || -L`
98
+ # wrapper is what lets a not-yet-created slot through (-e is false for a
99
+ # dangling symlink, so -L is needed to catch that case too).
100
+ if [ -e "$f" ] || [ -L "$f" ]; then
101
+ [ -f "$f" ] && [ ! -L "$f" ] || return 0
102
+ fi
103
+ [ -r "$f" ] && { read -r first < "$f"; } 2>/dev/null
104
+ printf -v line '%s dur_us=%s hook=%s event=%s ppid=%s tool=%s\n' \
105
+ "$stamp" "$dur" "${MXHT_HOOK:--}" "${MXHT_EVENT:--}" "$PPID" "${MXHT_TOOL:--}"
106
+ # One printf of ~90 bytes to an O_APPEND fd is atomic under PIPE_BUF, so
107
+ # concurrent hooks cannot interleave partial lines.
108
+ # The 2>/dev/null wraps the GROUP, not the printf: a failing redirection is
109
+ # reported by the shell before an inner 2>/dev/null would be in effect, and a
110
+ # "Permission denied" on stderr from a PreToolUse hook is surfaced to the model.
111
+ if [ "${first%% *}" = "${stamp%% *}" ]; then
112
+ { printf '%s' "$line" >>"$f"; } 2>/dev/null
113
+ else
114
+ { printf '%s' "$line" >"$f"; } 2>/dev/null
115
+ fi
116
+ }
117
+ # `|| :` IS LOAD-BEARING — do not simplify to `trap _mxht_emit EXIT`. The hooks
118
+ # this block is inlined into run under `set -e`, and the EXIT trap runs with
119
+ # errexit still in force. Without `|| :`, a non-zero return from the probe — the
120
+ # final printf failing on an unwritable slot is the reachable case — replaces the
121
+ # hook's own exit status: a PreToolUse guard's exit 2 becomes exit 1, which the
122
+ # harness reads as "error", not "block", so the command it meant to block runs.
123
+ # Pinned verbatim by hook-timing-parity.test.sh.
124
+ trap '_mxht_emit || :' EXIT
125
+ # <<< SHARED hook-timing probe v1
126
+
127
+
49
128
  trap 'exit 0' ERR
50
129
  set -u
51
130
 
@@ -21,6 +21,83 @@
21
21
  # 0 = allow
22
22
  # 2 = block (path filters explain why CI didn't trigger — dispatch not needed)
23
23
 
24
+ MXHT_HOOK=workflow-dispatch-guard MXHT_EVENT=PreToolUse MXHT_TOOL=Bash
25
+ # >>> SHARED hook-timing probe v1
26
+ # Diagnostic instrumentation: records how long THIS hook ran, so hook time can be
27
+ # separated from time spent waiting on the API when a session stalls mid-stream.
28
+ # Appends one line to a local, gitignored log. Read it with
29
+ # mx-agent-system/scripts/hook-timing-report.sh. Nothing is transmitted anywhere.
30
+ #
31
+ # FAIL SILENT IS DELIBERATE HERE, and it is the opposite of this repo's usual
32
+ # fail-loud direction. Do not "correct" it to fail-loud by applying the fleet
33
+ # default. A diagnostic that can break the gate it observes is worse than no
34
+ # diagnostic: an unwritable path or a full disk would otherwise take out every
35
+ # guard on the PreToolUse path at once. Every step below is guarded and every
36
+ # failure path is a silent no-op that leaves the hook's behaviour untouched.
37
+ #
38
+ # NEAR-ZERO OVERHEAD: bash builtins only on the hot path ($EPOCHREALTIME, printf
39
+ # -T, one read, one append). No subprocess, no network, no JSON parsing, and the
40
+ # hook's stdin is never touched (the hook owns it). mkdir runs at most once per
41
+ # worktree. Kill switch: MX_HOOK_TIMING=0.
42
+ MXHT_T0="${EPOCHREALTIME:-}"
43
+ _mxht_emit() {
44
+ [ -z "${MXHT_DONE:-}" ] || return 0 # an ERR trap that exits fires EXIT too
45
+ MXHT_DONE=1
46
+ [ "${MX_HOOK_TIMING:-1}" != "0" ] || return 0
47
+ [ -n "${MXHT_T0:-}" ] && [ -n "${EPOCHREALTIME:-}" ] || return 0
48
+ local root="${CLAUDE_PROJECT_DIR:-${CLAUDE_WORKTREE_PATH:-}}"
49
+ [ -n "$root" ] && [ -d "$root" ] || return 0
50
+ local dir="$root/.mx-hook-timing"
51
+ [ -d "$dir" ] || mkdir -p "$dir" 2>/dev/null || return 0
52
+ # EPOCHREALTIME is seconds.microseconds; the separator is locale-dependent, so
53
+ # strip both forms and subtract as plain integer microseconds.
54
+ local dur=-1
55
+ { dur=$(( ${EPOCHREALTIME//[.,]/} - ${MXHT_T0//[.,]/} )); } 2>/dev/null
56
+ [ "$dur" -ge 0 ] 2>/dev/null || return 0
57
+ local stamp hour
58
+ printf -v stamp '%(%Y-%m-%d %H:%M:%S)T' -1
59
+ printf -v hour '%(%H)T' -1
60
+ # BOUNDED BY CONSTRUCTION: a 24-slot ring, one file per hour-of-day, so the log
61
+ # is at most 24 files each holding one hour of this machine's hook calls. The
62
+ # first writer into a slot on a new day truncates it instead of appending —
63
+ # detected by reading the slot's first line, which is a builtin read (no stat,
64
+ # no rm, no find, no cron). Two writers can race that truncation and lose a
65
+ # line or two at an hour boundary; that is acceptable for a sampling diagnostic.
66
+ local f="$dir/h$hour.log" first="" line
67
+ # THE SLOT MUST BE AN ORDINARY FILE, OR NOT EXIST YET (security review, #4848).
68
+ # Anything else is a silent no-op. Two concrete failures if this check is
69
+ # dropped: a FIFO at the slot makes the `read` below block until the hook's
70
+ # settings.json timeout kills it, and a PreToolUse guard killed that way loses
71
+ # its exit 2 — the command it meant to block then runs; a symlink at the slot
72
+ # sends the day-rollover truncation onto the symlink's target. The `-e || -L`
73
+ # wrapper is what lets a not-yet-created slot through (-e is false for a
74
+ # dangling symlink, so -L is needed to catch that case too).
75
+ if [ -e "$f" ] || [ -L "$f" ]; then
76
+ [ -f "$f" ] && [ ! -L "$f" ] || return 0
77
+ fi
78
+ [ -r "$f" ] && { read -r first < "$f"; } 2>/dev/null
79
+ printf -v line '%s dur_us=%s hook=%s event=%s ppid=%s tool=%s\n' \
80
+ "$stamp" "$dur" "${MXHT_HOOK:--}" "${MXHT_EVENT:--}" "$PPID" "${MXHT_TOOL:--}"
81
+ # One printf of ~90 bytes to an O_APPEND fd is atomic under PIPE_BUF, so
82
+ # concurrent hooks cannot interleave partial lines.
83
+ # The 2>/dev/null wraps the GROUP, not the printf: a failing redirection is
84
+ # reported by the shell before an inner 2>/dev/null would be in effect, and a
85
+ # "Permission denied" on stderr from a PreToolUse hook is surfaced to the model.
86
+ if [ "${first%% *}" = "${stamp%% *}" ]; then
87
+ { printf '%s' "$line" >>"$f"; } 2>/dev/null
88
+ else
89
+ { printf '%s' "$line" >"$f"; } 2>/dev/null
90
+ fi
91
+ }
92
+ # `|| :` IS LOAD-BEARING — do not simplify to `trap _mxht_emit EXIT`. The hooks
93
+ # this block is inlined into run under `set -e`, and the EXIT trap runs with
94
+ # errexit still in force. Without `|| :`, a non-zero return from the probe — the
95
+ # final printf failing on an unwritable slot is the reachable case — replaces the
96
+ # hook's own exit status: a PreToolUse guard's exit 2 becomes exit 1, which the
97
+ # harness reads as "error", not "block", so the command it meant to block runs.
98
+ # Pinned verbatim by hook-timing-parity.test.sh.
99
+ trap '_mxht_emit || :' EXIT
100
+ # <<< SHARED hook-timing probe v1
24
101
 
25
102
 
26
103
  # Fail-open: any unexpected error → allow the command through
@@ -35,6 +35,85 @@
35
35
  # - CLAUDE_WORKTREE_PATH: Absolute path to worktree (e.g., /workspace/.worktrees/foo)
36
36
  # - CLAUDE_WORKTREE_NAME: Worktree name (e.g., foo)
37
37
 
38
+ MXHT_HOOK=worktree-guard MXHT_EVENT=PreToolUse MXHT_TOOL=Bash
39
+ # >>> SHARED hook-timing probe v1
40
+ # Diagnostic instrumentation: records how long THIS hook ran, so hook time can be
41
+ # separated from time spent waiting on the API when a session stalls mid-stream.
42
+ # Appends one line to a local, gitignored log. Read it with
43
+ # mx-agent-system/scripts/hook-timing-report.sh. Nothing is transmitted anywhere.
44
+ #
45
+ # FAIL SILENT IS DELIBERATE HERE, and it is the opposite of this repo's usual
46
+ # fail-loud direction. Do not "correct" it to fail-loud by applying the fleet
47
+ # default. A diagnostic that can break the gate it observes is worse than no
48
+ # diagnostic: an unwritable path or a full disk would otherwise take out every
49
+ # guard on the PreToolUse path at once. Every step below is guarded and every
50
+ # failure path is a silent no-op that leaves the hook's behaviour untouched.
51
+ #
52
+ # NEAR-ZERO OVERHEAD: bash builtins only on the hot path ($EPOCHREALTIME, printf
53
+ # -T, one read, one append). No subprocess, no network, no JSON parsing, and the
54
+ # hook's stdin is never touched (the hook owns it). mkdir runs at most once per
55
+ # worktree. Kill switch: MX_HOOK_TIMING=0.
56
+ MXHT_T0="${EPOCHREALTIME:-}"
57
+ _mxht_emit() {
58
+ [ -z "${MXHT_DONE:-}" ] || return 0 # an ERR trap that exits fires EXIT too
59
+ MXHT_DONE=1
60
+ [ "${MX_HOOK_TIMING:-1}" != "0" ] || return 0
61
+ [ -n "${MXHT_T0:-}" ] && [ -n "${EPOCHREALTIME:-}" ] || return 0
62
+ local root="${CLAUDE_PROJECT_DIR:-${CLAUDE_WORKTREE_PATH:-}}"
63
+ [ -n "$root" ] && [ -d "$root" ] || return 0
64
+ local dir="$root/.mx-hook-timing"
65
+ [ -d "$dir" ] || mkdir -p "$dir" 2>/dev/null || return 0
66
+ # EPOCHREALTIME is seconds.microseconds; the separator is locale-dependent, so
67
+ # strip both forms and subtract as plain integer microseconds.
68
+ local dur=-1
69
+ { dur=$(( ${EPOCHREALTIME//[.,]/} - ${MXHT_T0//[.,]/} )); } 2>/dev/null
70
+ [ "$dur" -ge 0 ] 2>/dev/null || return 0
71
+ local stamp hour
72
+ printf -v stamp '%(%Y-%m-%d %H:%M:%S)T' -1
73
+ printf -v hour '%(%H)T' -1
74
+ # BOUNDED BY CONSTRUCTION: a 24-slot ring, one file per hour-of-day, so the log
75
+ # is at most 24 files each holding one hour of this machine's hook calls. The
76
+ # first writer into a slot on a new day truncates it instead of appending —
77
+ # detected by reading the slot's first line, which is a builtin read (no stat,
78
+ # no rm, no find, no cron). Two writers can race that truncation and lose a
79
+ # line or two at an hour boundary; that is acceptable for a sampling diagnostic.
80
+ local f="$dir/h$hour.log" first="" line
81
+ # THE SLOT MUST BE AN ORDINARY FILE, OR NOT EXIST YET (security review, #4848).
82
+ # Anything else is a silent no-op. Two concrete failures if this check is
83
+ # dropped: a FIFO at the slot makes the `read` below block until the hook's
84
+ # settings.json timeout kills it, and a PreToolUse guard killed that way loses
85
+ # its exit 2 — the command it meant to block then runs; a symlink at the slot
86
+ # sends the day-rollover truncation onto the symlink's target. The `-e || -L`
87
+ # wrapper is what lets a not-yet-created slot through (-e is false for a
88
+ # dangling symlink, so -L is needed to catch that case too).
89
+ if [ -e "$f" ] || [ -L "$f" ]; then
90
+ [ -f "$f" ] && [ ! -L "$f" ] || return 0
91
+ fi
92
+ [ -r "$f" ] && { read -r first < "$f"; } 2>/dev/null
93
+ printf -v line '%s dur_us=%s hook=%s event=%s ppid=%s tool=%s\n' \
94
+ "$stamp" "$dur" "${MXHT_HOOK:--}" "${MXHT_EVENT:--}" "$PPID" "${MXHT_TOOL:--}"
95
+ # One printf of ~90 bytes to an O_APPEND fd is atomic under PIPE_BUF, so
96
+ # concurrent hooks cannot interleave partial lines.
97
+ # The 2>/dev/null wraps the GROUP, not the printf: a failing redirection is
98
+ # reported by the shell before an inner 2>/dev/null would be in effect, and a
99
+ # "Permission denied" on stderr from a PreToolUse hook is surfaced to the model.
100
+ if [ "${first%% *}" = "${stamp%% *}" ]; then
101
+ { printf '%s' "$line" >>"$f"; } 2>/dev/null
102
+ else
103
+ { printf '%s' "$line" >"$f"; } 2>/dev/null
104
+ fi
105
+ }
106
+ # `|| :` IS LOAD-BEARING — do not simplify to `trap _mxht_emit EXIT`. The hooks
107
+ # this block is inlined into run under `set -e`, and the EXIT trap runs with
108
+ # errexit still in force. Without `|| :`, a non-zero return from the probe — the
109
+ # final printf failing on an unwritable slot is the reachable case — replaces the
110
+ # hook's own exit status: a PreToolUse guard's exit 2 becomes exit 1, which the
111
+ # harness reads as "error", not "block", so the command it meant to block runs.
112
+ # Pinned verbatim by hook-timing-parity.test.sh.
113
+ trap '_mxht_emit || :' EXIT
114
+ # <<< SHARED hook-timing probe v1
115
+
116
+
38
117
  set -euo pipefail
39
118
 
40
119
  # Read the tool input from stdin (JSON format)
package/package.json CHANGED
@@ -1,6 +1,6 @@
1
1
  {
2
2
  "name": "@memnexus-ai/mx-agent-cli",
3
- "version": "0.1.263",
3
+ "version": "0.1.265",
4
4
  "description": "CLI for creating and managing AI agent teams",
5
5
  "type": "module",
6
6
  "bin": {