@mega-yfue/eufy-sdk 0.6.0-beta.45 → 0.6.0-beta.46

package/dist/index.js

@@ -5151,31 +5151,6 @@ var CONTACT_MEMBERS = {
     provenance: "verified",
     description: "Contact state, true=open (verified: param 1550 entry-sensor contact)."
   },
-  /**
-   * Unix seconds at which the sensor last checked in — the liveness read beside the contact state, and
-   * the way to tell a genuinely closed door from a sensor that stopped reporting. A `timestamp` kind
-   * takes no `unit`: it is an instant, not a duration.
-   */
-  lastSeen: {
-    param: 1551,
-    type: "number",
-    kind: "timestamp",
-    provenance: "verified",
-    description: "Last-seen unix timestamp, seconds (verified: param 1551)."
-  },
-  /**
-   * Link quality to whichever radio the sensor is paired over, in dBm as the device measures it. The
-   * same param 1141 the other sub-1G sensors report on, so the number is comparable across them —
-   * unlike a bars mapping, which this SDK never applies.
-   */
-  rssi: {
-    param: 1141,
-    type: "number",
-    unit: "dBm",
-    kind: "dbm",
-    provenance: "verified",
-    description: "Sub-1G/Wi-Fi signal strength (verified: param 1141 = RSSI)."
-  },
   /**
    * Rejected, not clamped, outside the tone enum: a fire-and-forget write of a bogus tone would look like
    * it worked. The wire is a direct-binary scalar `[ch][value][acct]` at signCode 8 — the app's own
@@ -5230,7 +5205,7 @@ var CONTACT_MEMBERS = {
 };
 var CONTACT = {
   capability: "contact",
-  description: "Entry (door/window) sensor: contact state, last-seen, and the built-in alarm tone/volume.",
+  description: "Entry (door/window) sensor: contact state and the built-in alarm tone/volume.",
   members: CONTACT_MEMBERS,
   properties: propertiesOf(CONTACT_MEMBERS),
   /** A reported entry-sensor contact param (1550) is the verified proof of a contact sensor. */
@@ -7612,18 +7587,6 @@ var LEAK_MEMBERS = {
     kind: "boolean",
     provenance: "guessed",
     description: "Water-leak detected. UNVERIFIED: actually delivered as a push event, not a state param; placeholder id pending capture verification."
-  },
-  /**
-   * Unix seconds at which the sensor last checked in — param 1551, the same last-seen id the other
-   * sensor capabilities read. A `timestamp` kind takes no `unit`: the number is an instant, not a
-   * duration, and declaring `unit: "s"` beside it fails the value-kind spec.
-   */
-  lastSeen: {
-    param: 1551,
-    type: "number",
-    kind: "timestamp",
-    provenance: "verified",
-    description: "Last-seen unix timestamp, seconds (verified: param 1551)."
   }
 };
 var LEAK = {
@@ -7649,18 +7612,6 @@ var SMOKE_MEMBERS = {
     kind: "boolean",
     provenance: "guessed",
     description: "Smoke detected. UNVERIFIED: placeholder id pending capture verification."
-  },
-  /**
-   * Unix seconds at which the detector last checked in — param 1551, the same last-seen id the other
-   * sensor capabilities read. A `timestamp` kind takes no `unit`: the number is an instant, not a
-   * duration, and declaring `unit: "s"` beside it fails the value-kind spec.
-   */
-  lastSeen: {
-    param: 1551,
-    type: "number",
-    kind: "timestamp",
-    provenance: "verified",
-    description: "Last-seen unix timestamp, seconds (verified: param 1551)."
   }
 };
 var SMOKE = {
@@ -7686,11 +7637,23 @@ var CO_MEMBERS = {
     kind: "boolean",
     provenance: "guessed",
     description: "Carbon-monoxide detected. UNVERIFIED: placeholder id pending capture verification."
-  },
+  }
+};
+var CO = {
+  capability: "co",
+  description: "Carbon-monoxide (CO) detector alarm state.",
+  members: CO_MEMBERS,
+  properties: propertiesOf(CO_MEMBERS),
+  // CO detectors expose no stable state param; the model/name (co/carbon) is the signal.
+  detection: { modelHints: [/co\b|carbon/i] }
+};
+
+// dist/model/capabilities/link.js
+var LINK_MEMBERS = {
   /**
-   * Unix seconds at which the detector last checked in — param 1551, the same last-seen id the other
-   * sensor capabilities read. A `timestamp` kind takes no `unit`: the number is an instant, not a
-   * duration, and declaring `unit: "s"` beside it fails the value-kind spec.
+   * Unix seconds at which the device last checked in, as the device itself reports it — beside
+   * `deviceState(sn).lastSeenMs`, which the SDK derives from the cloud's own update times. A
+   * `timestamp` takes no `unit`: it is an instant, not a duration.
    */
   lastSeen: {
     param: 1551,
@@ -7698,15 +7661,23 @@ var CO_MEMBERS = {
     kind: "timestamp",
     provenance: "verified",
     description: "Last-seen unix timestamp, seconds (verified: param 1551)."
+  },
+  /** Link quality in dBm as the device measures it, never normalised to a bar count. */
+  rssi: {
+    param: 1141,
+    type: "number",
+    unit: "dBm",
+    kind: "dbm",
+    provenance: "verified",
+    description: "Sub-1G/Wi-Fi signal strength (verified: param 1141 = RSSI)."
   }
 };
-var CO = {
-  capability: "co",
-  description: "Carbon-monoxide (CO) detector alarm state.",
-  members: CO_MEMBERS,
-  properties: propertiesOf(CO_MEMBERS),
-  // CO detectors expose no stable state param; the model/name (co/carbon) is the signal.
-  detection: { modelHints: [/co\b|carbon/i] }
+var LINK = {
+  capability: "link",
+  description: "Check-in timestamp and signal strength, as the device reports them.",
+  members: LINK_MEMBERS,
+  properties: propertiesOf(LINK_MEMBERS),
+  detection: { evidenceParams: [1551, 1141] }
 };
 
 // dist/model/capabilities/lock.js
@@ -7822,18 +7793,6 @@ var LOCK_MEMBERS = {
     provenance: "verified",
     description: "Lock battery level 0-100 (verified: param 1101, alias 6001)."
   },
-  /**
-   * Link quality in dBm as the lock measures it, on the shared param 1141. On the `ff09` wire the
-   * actuations are fire-and-forget, so a weak link is silent rather than an error.
-   */
-  rssi: {
-    param: 1141,
-    type: "number",
-    unit: "dBm",
-    kind: "dbm",
-    provenance: "verified",
-    description: "Lock signal strength (verified: param 1141 = RSSI)."
-  },
   /**
    * Lock the deadbolt/door. Resolves after sending, without confirming physical state — except on the
    * classic Wi-Fi lock, which answers: there it rejects on a device refusal or no reply as well.
@@ -8053,18 +8012,6 @@ var KEYPAD_MEMBERS = {
     provenance: "apk",
     coerce: isChargingState,
     description: "Keypad charging \u2014 derived from APP_CMD_KEYPAD_BATTERY_CHARGER_STATE (1655) as `value \u2209 {0,2}`, matching the app's own decode."
-  },
-  /**
-   * The keypad's link quality in dBm, on the same param 1141 the other sub-1G sensors report signal
-   * strength on. Reported as the device measures it: raw dBm, never normalised to a bar count.
-   */
-  rssi: {
-    param: 1141,
-    type: "number",
-    unit: "dBm",
-    kind: "dbm",
-    provenance: "verified",
-    description: "Keypad signal strength (verified: param 1141 = RSSI)."
   }
 };
 var KEYPAD = {
@@ -11591,6 +11538,7 @@ var MODULES = [
   LOCATE,
   SMART_DROP,
   DISPLAY,
+  LINK,
   INFO
 ];
 var BY_CAP = new Map(MODULES.map((m) => [m.capability, m]));
@@ -33722,6 +33670,7 @@ export {
   LEAK_MEMBERS,
   LIFE_PARAMS,
   LIGHT_MEMBERS,
+  LINK_MEMBERS,
   LIVE_TRACE_MESSAGE,
   LOCATE_MEMBERS,
   LOCK_MEMBERS,