@mega-yfue/eufy-sdk 0.2.0-beta.22 → 0.2.0-beta.23

package/dist/index.js

@@ -27155,45 +27155,79 @@ var SolixClient = class _SolixClient {
 import { EventEmitter as EventEmitter10 } from "node:events";
 var SOLIX_METER_FIELD_NAMES = {
   168: "meterPowerL1",
+  // Anker Modbus: primary_phase_1_active_power
   169: "meterPowerL2",
+  // Anker Modbus: primary_phase_2_active_power
   170: "meterPowerL3",
+  // Anker Modbus: primary_phase_3_active_power
   171: "meterPowerTotal",
+  // Anker Modbus: primary_total_active_power
   172: "meterVoltageL1",
+  // Anker Modbus: primary_phase_1_voltage
   173: "meterVoltageL2",
+  // Anker Modbus: primary_phase_2_voltage
   174: "meterVoltageL3",
+  // Anker Modbus: primary_phase_3_voltage
   175: "meterCurrentL1",
+  // Anker Modbus: primary_phase_1_current
   176: "meterCurrentL2",
+  // Anker Modbus: primary_phase_2_current
   177: "meterCurrentL3",
+  // Anker Modbus: primary_phase_3_current
   179: "meterImportEnergy",
+  // Anker Modbus: primary_total_forward_active_energy
   180: "meterExportEnergy"
+  // Anker Modbus: primary_total_reverse_active_energy
 };
 var SOLIX_METER_PRODUCT_PREFIXES = ["AE1X0"];
 var SOLIX_SOLARBANK_PRODUCT_PREFIX = "AE10";
 var SOLIX_SOLARBANK_FIELD_NAMES = {
   171: "photovoltaicPower",
-  // total PV input across the strings
+  // total PV input across the strings — Anker Modbus: pv_power
   172: "batteryPower",
+  // signed net pack power — Anker Modbus: battery_charging_power − battery_discharging_power
   188: "chargePower",
+  // Anker Modbus: battery_charging_power
   173: "dischargePower",
+  // Anker Modbus: battery_discharging_power
   174: "acPlugPower",
+  // AC plug, signed — Anker Modbus: ac_grid_output_power
   175: "socketPower",
-  // the unit's own on-board AC socket (an appliance plugged into the Solarbank)
+  // the unit's own on-board AC socket (an appliance plugged into the Solarbank) — no Anker register
   196: "gridInputPower",
+  // Anker Modbus: grid_import_power
   197: "homeLoadPower",
+  // Anker Modbus: load_power
   198: "pv1Power",
-  // the four PV-string inputs (0 when a string is unused / dark)
+  // the four PV-string inputs (0 when a string is unused / dark); Anker exposes only a pv_power total
   199: "pv2Power",
   200: "pv3Power",
   201: "pv4Power"
 };
 var SOLIX_STATE_FIELD_NAMES = {
   169: "mode",
-  // current operating (EMS) mode (1 custom, 2 self-consumption, 4 rapid charge, 7 smart, 8 dynamic tariff)
+  // current operating (EMS) mode, AE103 numbering: 1 custom, 2 self-consumption, 4 rapid charge, 7 smart, 8 dynamic tariff (NOT the Modbus SOLIX_MODBUS_EMS_MODES numbering)
   170: "maxLoad"
   // configured max home load (W) — matches get_site_device_param max_load
   // NOTE `0xab` is grid-in/out-related power but its exact meaning is not yet pinned, so it stays raw
   // `state_ab` (a diagnostic a consumer can watch) rather than being asserted under a guessed name.
 };
+var SOLIX_MODBUS_EMS_MODES = {
+  0: "selfConsumption",
+  // Self-Consumption Mode (Anker: self_consumption, 0x8006 BIT0)
+  1: "timeOfUse",
+  // Time Of Use Mode (Anker: tou_mode, BIT1)
+  3: "thirdPartyControl",
+  // Third-Party Controlled (Anker: third_party_control, BIT5)
+  4: "custom",
+  // Custom Mode (Anker: custom_mode, BIT2)
+  5: "socketOverlay",
+  // Socket Overlay Mode (Anker: socket_overlay_mode, BIT4)
+  6: "smart",
+  // Smart Mode (Anker: smart_mode, BIT3)
+  7: "dynamicTariff"
+  // Dynamic Tariff Mode (Anker: dynamic_pricing, BIT6)
+};
 function solixStateReadings(frame) {
   const out = {};
   for (const [tag2, value] of frame.fields) {
@@ -27756,6 +27790,7 @@ export {
   SMOKE_MEMBERS,
   SOLIX_ENERGY_METER_MEMBERS,
   SOLIX_LOCAL_KEY_HEX,
+  SOLIX_MODBUS_EMS_MODES,
   STATE_EVENT_FIELDS,
   STATION_CHANNEL3 as STATION_CHANNEL,
   STATION_CHUNK_BYTES,