@maxim_mazurok/gapi.client.compute-alpha 0.0.20240919 → 0.0.20241001

package/index.d.ts

@@ -9,7 +9,7 @@
 // This file was generated by https://github.com/Maxim-Mazurok/google-api-typings-generator. Please do not edit it manually.
 // In case of any problems please post issue to https://github.com/Maxim-Mazurok/google-api-typings-generator
 // Generated from: https://www.googleapis.com/discovery/v1/apis/compute/alpha/rest
-// Revision: 20240919
+// Revision: 20241001
 
 /// <reference types="gapi.client" />
 
@@ -317,6 +317,8 @@ declare namespace gapi.client {
     interface AllocationResourceStatus {
       /** Indicates number of blocks for accelerator optimized family (applicable beyond A3 only). */
       reservationBlockCount?: number;
+      /** Maintenance information for the group of hosts on this reservation including running VMs and unused hosts. Applicable only to accelerator optimized VM families beyond A3 only. For both DENSE or STANDARD reservation, granular maintenance information can be retried at reservation block level. */
+      reservationMaintenance?: GroupMaintenanceInfo;
       /** Allocation Properties of this reservation. */
       specificSkuAllocation?: AllocationResourceStatusSpecificSKUAllocation;
     }
@@ -455,16 +457,12 @@ declare namespace gapi.client {
     interface AuditConfig {
       /** The configuration for logging of each type of permission. */
       auditLogConfigs?: AuditLogConfig[];
-      /** This is deprecated and has no effect. Do not use. */
-      exemptedMembers?: string[];
       /** Specifies a service that will be enabled for audit logging. For example, `storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special value that covers all services. */
       service?: string;
     }
     interface AuditLogConfig {
       /** Specifies the identities that do not cause logging for this type of permission. Follows the same format of Binding.members. */
       exemptedMembers?: string[];
-      /** This is deprecated and has no effect. Do not use. */
-      ignoreChildExemptions?: boolean;
       /** The log type that this config enables. */
       logType?: string;
     }
@@ -835,7 +833,7 @@ declare namespace gapi.client {
       dryRun?: boolean;
       /** Optional parameter to define a target utilization for the Custom Metrics balancing mode. The valid range is [0.0, 1.0]. */
       maxUtilization?: number;
-      /** Name of a custom utilization signal. The name must be 1-64 characters long and match the regular expression [a-z]([-_.a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, period, underscore, lowercase letter, or digit, except the last character, which cannot be a dash, period, or underscore. For usage guidelines, see Custom Metrics balancing mode. This field can only be used for a global or regional backend service with the loadBalancingScheme set to EXTERNAL_MANAGED, INTERNAL_MANAGED INTERNAL_SELF_MANAGED. */
+      /** Name of a custom utilization signal. The name must be 1-24 characters long and match the regular expression [a-z]([-_.a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, period, underscore, lowercase letter, or digit, except the last character, which cannot be a dash, period, or underscore. For usage guidelines, see Custom Metrics balancing mode. This field can only be used for a global or regional backend service with the loadBalancingScheme set to EXTERNAL_MANAGED, INTERNAL_MANAGED INTERNAL_SELF_MANAGED. */
       name?: string;
     }
     interface BackendService {
@@ -1018,7 +1016,7 @@ declare namespace gapi.client {
     interface BackendServiceCustomMetric {
       /** If true, the metric data is not used for load balancing. */
       dryRun?: boolean;
-      /** Name of a custom utilization signal. The name must be 1-64 characters long and match the regular expression [a-z]([-_.a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, period, underscore, lowercase letter, or digit, except the last character, which cannot be a dash, period, or underscore. For usage guidelines, see Custom Metrics balancing mode. This field can only be used for a global or regional backend service with the loadBalancingScheme set to EXTERNAL_MANAGED, INTERNAL_MANAGED INTERNAL_SELF_MANAGED. */
+      /** Name of a custom utilization signal. The name must be 1-24 characters long and match the regular expression [a-z]([-_.a-z0-9]*[a-z0-9])? which means the first character must be a lowercase letter, and all following characters must be a dash, period, underscore, lowercase letter, or digit, except the last character, which cannot be a dash, period, or underscore. For usage guidelines, see Custom Metrics balancing mode. This field can only be used for a global or regional backend service with the loadBalancingScheme set to EXTERNAL_MANAGED, INTERNAL_MANAGED INTERNAL_SELF_MANAGED. */
       name?: string;
     }
     interface BackendServiceFailoverPolicy {
@@ -2626,7 +2624,7 @@ declare namespace gapi.client {
       selfLinkWithId?: string;
       /** List of Projects/Folders to share with. */
       shareSettings?: ShareSettings;
-      /** Indicates whether the auto-created reservation can be consumed by VMs with affinity for "any" reservation. If the field is set, then only VMs that target the reservation by name can consume from the delivered reservation. If set to true,the delivered resevervation will have the same name as the future reservation. */
+      /** Indicates whether the auto-created reservation can be consumed by VMs with affinity for "any" reservation. If the field is set, then only VMs that target the reservation by name can consume from the delivered reservation. */
       specificReservationRequired?: boolean;
       /** Future Reservation configuration to indicate instance properties and total count. */
       specificSkuProperties?: FutureReservationSpecificSKUProperties;
@@ -2823,6 +2821,18 @@ declare namespace gapi.client {
       /** REQUIRED: The complete policy to be applied to the 'resource'. The size of the policy is limited to a few 10s of KB. An empty policy is in general a valid policy but certain services (like Projects) might reject them. */
       policy?: Policy;
     }
+    interface GroupMaintenanceInfo {
+      /** Indicates if this group of VMs have opportunistic maintenance enabled. This will be set on the reservation, and will be inherited for reservation blocks. */
+      enableOpportunisticMaintenance?: boolean;
+      /** Progress for ongoing maintenance for this group of VMs/hosts. Describes number of hosts in the block that have ongoing maintenance. */
+      maintenanceOngoingCount?: number;
+      /** Progress for ongoing maintenance for this group of VMs/hosts. Describes number of hosts in the block that have pending maintenance. */
+      maintenancePendingCount?: number;
+      /** Indicates the maintenance type for this group of VMs. This will be set on the reservation, and will be inherited for reservation blocks. */
+      schedulingType?: string;
+      /** Maintenance information on this group of VMs. */
+      upcomingGroupMaintenance?: UpcomingMaintenance;
+    }
     interface GRPCHealthCheck {
       /** The gRPC service name for the health check. This field is optional. The value of grpc_service_name has the following meanings by convention: - Empty service_name means the overall status of all services at the backend. - Non-empty service_name means the health of that gRPC service, as defined by the owner of the service. The grpc_service_name can only be ASCII. */
       grpcServiceName?: string;
@@ -4071,6 +4081,8 @@ declare namespace gapi.client {
       description?: string;
       /** [Output Only] A unique identifier for this resource type. The server generates this identifier. */
       id?: string;
+      /** The list of specifications of per-instance configs to be created. This field cannot be used together with 'resize_by'. */
+      instances?: PerInstanceConfig[];
       /** [Output Only] The resource type, which is always compute#instanceGroupManagerResizeRequest for resize requests. */
       kind?: string;
       /** The name of this resize request. The name must be 1-63 characters long, and comply with RFC1035. */
@@ -4677,6 +4689,8 @@ declare namespace gapi.client {
       resourcePolicies?: string[];
     }
     interface InstancesReportHostAsFaultyRequest {
+      /** The action hint to report the host as faulty. */
+      actionHint?: string;
       faultReasons?: InstancesReportHostAsFaultyRequestFaultReason[];
     }
     interface InstancesReportHostAsFaultyRequestFaultReason {
@@ -5039,6 +5053,8 @@ declare namespace gapi.client {
       id?: string;
       /** [Output Only] A list of the URLs of all InterconnectAttachments configured to use this Interconnect. */
       interconnectAttachments?: string[];
+      /** [Output Only] URLs of InterconnectGroups that include this Interconnect. Order is arbitrary and items are unique. */
+      interconnectGroups?: string[];
       /** Type of interconnect, which can take one of the following values: - PARTNER: A partner-managed interconnection shared between customers though a partner. - DEDICATED: A dedicated physical interconnection with the customer. Note that a value IT_PRIVATE has been deprecated in favor of DEDICATED. */
       interconnectType?: string;
       /** [Output Only] Type of the resource. Always compute#interconnect for interconnects. */
@@ -5102,6 +5118,8 @@ declare namespace gapi.client {
     interface InterconnectAttachment {
       /** Determines whether this Attachment will carry packets. Not present for PARTNER_PROVIDER. */
       adminEnabled?: boolean;
+      /** [Output Only] URL of the AttachmentGroup that includes this Attachment. */
+      attachmentGroup?: string;
       /** Provisioned bandwidth capacity for the interconnect attachment. For attachments of type DEDICATED, the user can set the bandwidth. For attachments of type PARTNER, the Google Partner that is operating the interconnect must set the bandwidth. Output only for PARTNER type, mutable for PARTNER_PROVIDER and DEDICATED, and can take one of the following values: - BPS_50M: 50 Mbit/s - BPS_100M: 100 Mbit/s - BPS_200M: 200 Mbit/s - BPS_300M: 300 Mbit/s - BPS_400M: 400 Mbit/s - BPS_500M: 500 Mbit/s - BPS_1G: 1 Gbit/s - BPS_2G: 2 Gbit/s - BPS_5G: 5 Gbit/s - BPS_10G: 10 Gbit/s - BPS_20G: 20 Gbit/s - BPS_50G: 50 Gbit/s */
       bandwidth?: string;
       /** This field is not available. */
@@ -5223,6 +5241,107 @@ declare namespace gapi.client {
       max?: number;
       min?: number;
     }
+    interface InterconnectAttachmentGroup {
+      /** Attachments in the AttachmentGroup. Keys are arbitrary user-specified strings. Users are encouraged, but not required, to use their preferred format for resource links as keys. Note that there are add-members and remove-members methods in gcloud. The size of this map is limited by an "Attachments per group" quota. */
+      attachments?: {[P in string]: InterconnectAttachmentGroupAttachment};
+      configured?: InterconnectAttachmentGroupConfigured;
+      /** [Output Only] Creation timestamp in RFC3339 text format. */
+      creationTimestamp?: string;
+      /** An optional description of this resource. Provide this property when you create the resource. */
+      description?: string;
+      /** Opaque system-generated token that uniquely identifies the configuration. If provided when patching a configuration in update mode, the provided token must match the current token or the update is rejected. This provides a reliable means of doing read-modify-write (optimistic locking) as described by AIP 154. */
+      etag?: string;
+      /** [Output Only] The unique identifier for the resource type. The server generates this identifier. */
+      id?: string;
+      intent?: InterconnectAttachmentGroupIntent;
+      /** The URL of an InterconnectGroup that groups these Attachments' Interconnects. Customers do not need to set this unless directed by Google Support. */
+      interconnectGroup?: string;
+      /** [Output Only] Type of the resource. Always compute#interconnectAttachmentGroup. */
+      kind?: string;
+      logicalStructure?: InterconnectAttachmentGroupLogicalStructure;
+      /** Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash. */
+      name?: string;
+      /** [Output Only] Server-defined URL for the resource. */
+      selfLink?: string;
+    }
+    interface InterconnectAttachmentGroupAttachment {
+      attachment?: string;
+    }
+    interface InterconnectAttachmentGroupConfigured {
+      availabilitySla?: InterconnectAttachmentGroupConfiguredAvailabilitySLA;
+    }
+    interface InterconnectAttachmentGroupConfiguredAvailabilitySLA {
+      effectiveSla?: string;
+      intendedSlaBlockers?: InterconnectAttachmentGroupConfiguredAvailabilitySLAIntendedSlaBlockers[];
+    }
+    interface InterconnectAttachmentGroupConfiguredAvailabilitySLAIntendedSlaBlockers {
+      /** [Output Only] URLs of any particular Attachments to explain this blocker in more detail. */
+      attachments?: string[];
+      blockerType?: string;
+      /** [Output Only] The url of Google Cloud public documentation explaining this requirement. This is set for every type of requirement. */
+      documentationLink?: string;
+      /** [Output Only] A human-readable explanation of this requirement and why it's not met. This is set for every type of requirement. */
+      explanation?: string;
+      /** [Output Only] Metros used to explain this blocker in more detail. These are three-letter lowercase strings like "iad". This will be set for some blockers (like NO_ATTACHMENTS_IN_METRO_AND_ZONE) but does not apply to others. */
+      metros?: string[];
+      /** [Output Only] Zones used to explain this blocker in more detail. Format is "zone1" and/or "zone2". This will be set for some blockers (like MISSING_ZONE) but does not apply to others. */
+      zones?: string[];
+    }
+    interface InterconnectAttachmentGroupIntent {
+      availabilitySla?: string;
+    }
+    interface InterconnectAttachmentGroupLogicalStructure {
+      regions?: InterconnectAttachmentGroupLogicalStructureRegion[];
+    }
+    interface InterconnectAttachmentGroupLogicalStructureRegion {
+      metros?: InterconnectAttachmentGroupLogicalStructureRegionMetro[];
+      /** [Output Only] The name of a region, like "us-central1". */
+      region?: string;
+    }
+    interface InterconnectAttachmentGroupLogicalStructureRegionMetro {
+      facilities?: InterconnectAttachmentGroupLogicalStructureRegionMetroFacility[];
+      /** [Output Only] The name of the metro, as a three-letter lowercase string like "iad". This is the first component of the location of an Interconnect. */
+      metro?: string;
+    }
+    interface InterconnectAttachmentGroupLogicalStructureRegionMetroFacility {
+      /** [Output Only] The name of a facility, like "iad-1234". */
+      facility?: string;
+      zones?: InterconnectAttachmentGroupLogicalStructureRegionMetroFacilityZone[];
+    }
+    interface InterconnectAttachmentGroupLogicalStructureRegionMetroFacilityZone {
+      /** [Output Only] URLs of Attachments in the given zone, to the given region, on Interconnects in the given facility and metro. Every Attachment in the AG has such an entry. */
+      attachments?: string[];
+      /** [Output Only] The name of a zone, either "zone1" or "zone2". */
+      zone?: string;
+    }
+    interface InterconnectAttachmentGroupsListResponse {
+      etag?: string;
+      /** [Output Only] Unique identifier for the resource; defined by the server. */
+      id?: string;
+      /** A list of InterconnectAttachmentGroup resources. */
+      items?: InterconnectAttachmentGroup[];
+      kind?: string;
+      /** [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results. */
+      nextPageToken?: string;
+      /** [Output Only] Server-defined URL for this resource. */
+      selfLink?: string;
+      /** [Output Only] Unreachable resources. end_interface: MixerListResponseWithEtagBuilder */
+      unreachables?: string[];
+      /** [Output Only] Informational warning message. */
+      warning?: {
+        /** [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response. */
+        code?: string;
+        /** [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" } */
+        data?: Array<{
+          /** [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding). */
+          key?: string;
+          /** [Output Only] A warning data value corresponding to the key. */
+          value?: string;
+        }>;
+        /** [Output Only] A human-readable description of the warning code. */
+        message?: string;
+      };
+    }
     interface InterconnectAttachmentList {
       /** [Output Only] Unique identifier for the resource; defined by the server. */
       id?: string;
@@ -5342,6 +5461,103 @@ declare namespace gapi.client {
       /** Indicates whether or not MACsec is operational on this link. */
       operational?: boolean;
     }
+    interface InterconnectGroup {
+      configured?: InterconnectGroupConfigured;
+      /** [Output Only] Creation timestamp in RFC3339 text format. */
+      creationTimestamp?: string;
+      /** An optional description of this resource. Provide this property when you create the resource. */
+      description?: string;
+      /** Opaque system-generated token that uniquely identifies the configuration. If provided when patching a configuration in update mode, the provided token must match the current token or the update is rejected. This provides a reliable means of doing read-modify-write (optimistic locking) as described by API 154. */
+      etag?: string;
+      /** [Output Only] The unique identifier for the resource type. The server generates this identifier. */
+      id?: string;
+      intent?: InterconnectGroupIntent;
+      /** Interconnects in the InterconnectGroup. Keys are arbitrary user-specified strings. Users are encouraged, but not required, to use their preferred format for resource links as keys. Note that there are add-members and remove-members methods in gcloud. The size of this map is limited by an "Interconnects per group" quota. */
+      interconnects?: {[P in string]: InterconnectGroupInterconnect};
+      /** [Output Only] Type of the resource. Always compute#InterconnectGroup */
+      kind?: string;
+      /** Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash. */
+      name?: string;
+      physicalStructure?: InterconnectGroupPhysicalStructure;
+      /** [Output Only] Server-defined URL for the resource. */
+      selfLink?: string;
+    }
+    interface InterconnectGroupConfigured {
+      topologyCapability?: InterconnectGroupConfiguredTopologyCapability;
+    }
+    interface InterconnectGroupConfiguredTopologyCapability {
+      intendedCapabilityBlockers?: InterconnectGroupConfiguredTopologyCapabilityIntendedCapabilityBlockers[];
+      supportedSla?: string;
+    }
+    interface InterconnectGroupConfiguredTopologyCapabilityIntendedCapabilityBlockers {
+      blockerType?: string;
+      /** [Output Only] The url of Google Cloud public documentation explaining this requirement. This is set for every type of requirement. */
+      documentationLink?: string;
+      /** [Output Only] A human-readable explanation of this requirement and why it's not met. This is set for every type of requirement. */
+      explanation?: string;
+      /** [Output Only] Facilities used to explain this blocker in more detail. Like physicalStructure.metros.facilities.facility, this is a numeric string like "5467". */
+      facilities?: string[];
+      /** [Output Only] Interconnects used to explain this blocker in more detail. */
+      interconnects?: string[];
+      /** [Output Only] Metros used to explain this blocker in more detail. These are three-letter lowercase strings like "iad". A blocker like INCOMPATIBLE_METROS will specify the problematic metros in this field. */
+      metros?: string[];
+      /** [Output Only] Zones used to explain this blocker in more detail. Zone names are "zone1" and/or "zone2". */
+      zones?: string[];
+    }
+    interface InterconnectGroupIntent {
+      topologyCapability?: string;
+    }
+    interface InterconnectGroupInterconnect {
+      /** The URL of an Interconnect in this group. All Interconnects in the group are unique. */
+      interconnect?: string;
+    }
+    interface InterconnectGroupPhysicalStructure {
+      metros?: InterconnectGroupPhysicalStructureMetros[];
+    }
+    interface InterconnectGroupPhysicalStructureMetros {
+      facilities?: InterconnectGroupPhysicalStructureMetrosFacilities[];
+      /** [Output Only] The name of the metro, as a three-letter lowercase string like "iad". This is the first component of the location of Interconnects underneath this. */
+      metro?: string;
+    }
+    interface InterconnectGroupPhysicalStructureMetrosFacilities {
+      /** [Output Only] The ID of this facility, as a numeric string like "5467". This is the third component of the location of Interconnects in this facility. */
+      facility?: string;
+      zones?: InterconnectGroupPhysicalStructureMetrosFacilitiesZones[];
+    }
+    interface InterconnectGroupPhysicalStructureMetrosFacilitiesZones {
+      /** [Output Only] URLs of Interconnects in this redundancy group in the given metro, facility, and zone. */
+      interconnects?: string[];
+      /** [Output Only] The name of the zone, either "zone1" or "zone2". This is the second component of the location of Interconnects in this facility. */
+      zone?: string;
+    }
+    interface InterconnectGroupsListResponse {
+      etag?: string;
+      /** [Output Only] Unique identifier for the resource; defined by the server. */
+      id?: string;
+      /** A list of InterconnectGroup resources. */
+      items?: InterconnectGroup[];
+      kind?: string;
+      /** [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results. */
+      nextPageToken?: string;
+      /** [Output Only] Server-defined URL for this resource. */
+      selfLink?: string;
+      /** [Output Only] Unreachable resources. end_interface: MixerListResponseWithEtagBuilder */
+      unreachables?: string[];
+      /** [Output Only] Informational warning message. */
+      warning?: {
+        /** [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response. */
+        code?: string;
+        /** [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" } */
+        data?: Array<{
+          /** [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding). */
+          key?: string;
+          /** [Output Only] A warning data value corresponding to the key. */
+          value?: string;
+        }>;
+        /** [Output Only] A human-readable description of the warning code. */
+        message?: string;
+      };
+    }
     interface InterconnectList {
       /** [Output Only] Unique identifier for the resource; defined by the server. */
       id?: string;
@@ -6199,6 +6415,82 @@ declare namespace gapi.client {
       /** The whole units of the amount. For example if `currencyCode` is `"USD"`, then 1 unit is one US dollar. */
       units?: string;
     }
+    interface MultiMig {
+      /** [Output only] The creation timestamp of this multi-MIG in RFC3339 text format. */
+      creationTimestamp?: string;
+      /** An optional description of this resource. */
+      description?: string;
+      /** [Output only] The unique identifier for this resource type. The server generates this identifier. */
+      id?: string;
+      /** [Output only] Type of the resource. Always compute#multiMig for multi-MIGs. */
+      kind?: string;
+      locationPolicy?: MultiMigLocationPolicy;
+      /** The name of the multi-MIG. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash. */
+      name?: string;
+      /** Map of user-provided names associated with their parts. Keys in the map are arbitrary names chosen by the user for parts. Keys need to be alphanumeric and not longer than 64 characters. */
+      parts?: {[P in string]: MultiMigPart};
+      /** [Output only] The URL of the region where the resource resides. You must specify this field as part of the HTTP request URL. You cannot set the region as a field in the request body. */
+      region?: string;
+      /** Resource policies for this multi-MIG. */
+      resourcePolicies?: MultiMigResourcePolicies;
+      /** Policy for handling provisioning and other scheduling-related events. */
+      schedulingPolicy?: MultiMigSchedulingPolicy;
+      /** [Output only] Server-defined URL for the resource. */
+      selfLink?: string;
+      /** [Output only] Server-defined URL for this resource with the resource id. */
+      selfLinkWithId?: string;
+      status?: MultiMigStatus;
+    }
+    interface MultiMigLocationPolicy {
+      /** List of zones where managed instance groups will be provisioned. Should be valid RFC1035 name. */
+      provisioningZones?: string[];
+    }
+    interface MultiMigPart {
+      /** The URL of a managed instance group that you want to attach to the multi-MIG. */
+      instanceGroupManager?: string;
+      /** A managed instance group to be created by the multi-MIG. */
+      instanceGroupManagerProperties?: InstanceGroupManager;
+    }
+    interface MultiMigResourcePolicies {
+      /** The URL of the workload policy that is specified for this multi-MIG. It can be a full or partial URL. For example, the following are all valid URLs to a workload policy: - https://www.googleapis.com/compute/v1/projects/project/regions/region /resourcePolicies/resourcePolicy - projects/project/regions/region/resourcePolicies/resourcePolicy - regions/region/resourcePolicies/resourcePolicy */
+      workloadPolicy?: string;
+    }
+    interface MultiMigSchedulingPolicy {
+      /** How provisioning of parts (instance group managers) should be scheduled (coordinated or not). */
+      provisioning?: string;
+    }
+    interface MultiMigsList {
+      etag?: string;
+      /** Unique identifier for the resource; defined by the server. */
+      id?: string;
+      /** A list of multi-MIG resources. */
+      items?: MultiMig[];
+      /** Type of resource. */
+      kind?: string;
+      /** This token allows you to get the next page of results for maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results. */
+      nextPageToken?: string;
+      /** [Output only] Server-defined URL for this resource. */
+      selfLink?: string;
+      /** [Output only] Unreachable resources. */
+      unreachables?: string[];
+      /** Informational warning message. */
+      warning?: {
+        /** [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response. */
+        code?: string;
+        /** [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" } */
+        data?: Array<{
+          /** [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding). */
+          key?: string;
+          /** [Output Only] A warning data value corresponding to the key. */
+          value?: string;
+        }>;
+        /** [Output Only] A human-readable description of the warning code. */
+        message?: string;
+      };
+    }
+    interface MultiMigStatus {
+      memberInstanceGroupManagers?: string[];
+    }
     interface MutualTls {
       /** Specifies if the server TLS is configured to be strict or permissive. This field can be set to one of the following: STRICT: Client certificate must be presented, connection is in TLS. PERMISSIVE: Client certificate can be omitted, connection can be either plaintext or TLS. */
       mode?: string;
@@ -6871,8 +7163,6 @@ declare namespace gapi.client {
       allowVpn?: string;
       /** If set, limits the interface types that the network supports. If empty, all interface types are supported. */
       interfaceTypes?: string[];
-      /** Specifies which type of multicast is supported. */
-      multicast?: string;
       /** Specifies which type of unicast is supported. */
       unicast?: string;
     }
@@ -7540,7 +7830,7 @@ declare namespace gapi.client {
       statusMessage?: string;
       /** [Output Only] The unique target ID, which identifies a specific incarnation of the target resource. */
       targetId?: string;
-      /** [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from. */
+      /** [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the disk that the snapshot was created from. */
       targetLink?: string;
       /** [Output Only] User who requested the operation, for example: `user@example.com` or `alice_smith_identifier (global/workforcePools/example-com-us-employees)`. */
       user?: string;
@@ -8938,6 +9228,8 @@ declare namespace gapi.client {
       locationPrefix?: string;
       /** [Output Only] The name of this reservation block generated by Google Compute Engine. The name must be 1-63 characters long, and comply with RFC1035 @pattern [a-z](?:[-a-z0-9]{0,61}[a-z0-9])? */
       name?: string;
+      /** [Output Only] Maintenance information for the group of hosts on this reservation including running VMs and unused hosts. Applicable only to accelerator optimized VM families beyond A3 only. For both DENSE or STANDARD reservation, granular maintenance information can be retried at reservation block level. */
+      reservationMaintenance?: GroupMaintenanceInfo;
       /** [Output Only] Server-defined fully-qualified URL for this resource. */
       selfLink?: string;
       /** [Output Only] Server-defined URL for this resource with the resource id. */
@@ -9257,6 +9549,8 @@ declare namespace gapi.client {
       type?: string;
     }
     interface ResourceStatus {
+      /** [Output Only] Accelerators status show results of GPU scans. These scans are specialized diagnostic tests designed to uncover latent manufacturing defects or other issues that could potentially lead to data corruption or impede the customer's ability to efficiently execute GPU workloads. */
+      acceleratorStatus?: ResourceStatusAcceleratorStatus[];
       /** [Output Only] Contains last termination details why the instance was terminated. */
       lastInstanceTerminationDetails?: ResourceStatusLastInstanceTerminationDetails;
       /** [Output Only] An opaque ID of the host on which the VM is running. */
@@ -9270,6 +9564,29 @@ declare namespace gapi.client {
       shutdownDetails?: ResourceStatusShutdownDetails;
       upcomingMaintenance?: UpcomingMaintenance;
     }
+    interface ResourceStatusAcceleratorStatus {
+      /** The details of scans that passed for an accelerator. */
+      passedScans?: ResourceStatusAcceleratorStatusPassedScan[];
+      /** The details of recommended scans for an accelerator. */
+      recommendedScans?: ResourceStatusAcceleratorStatusRecommendedScan[];
+      /** The serial number of the accelerator. */
+      serialNumber?: string;
+      /** The UUID of the accelerator. */
+      uuid?: string;
+    }
+    interface ResourceStatusAcceleratorStatusPassedScan {
+      /** The end time of the passed scan in RFC3339 text format. */
+      endTime?: string;
+      name?: string;
+      /** The start time of the passed scan in RFC3339 text format. */
+      startTime?: string;
+      version?: string;
+    }
+    interface ResourceStatusAcceleratorStatusRecommendedScan {
+      estimatedDuration?: Duration;
+      name?: string;
+      version?: string;
+    }
     interface ResourceStatusLastInstanceTerminationDetails {
       /** Reason for termination */
       terminationReason?: string;
@@ -9451,6 +9768,8 @@ declare namespace gapi.client {
       name?: string;
       /** A list of NAT services created in this router. */
       nats?: RouterNat[];
+      /** URI of the ncc_gateway to which this router associated. */
+      nccGateway?: string;
       /** URI of the network to which this router belongs. */
       network?: string;
       /** [Output Only] URI of the region where the router resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body. */
@@ -11619,10 +11938,14 @@ declare namespace gapi.client {
       internalIpv6Prefix?: string;
       /** The range of internal addresses that are owned by this subnetwork. Provide this property when you create the subnetwork. For example, 10.0.0.0/8 or 100.64.0.0/10. Ranges must be unique and non-overlapping within a network. Only IPv4 is supported. This field is set at resource creation time. The range can be any range listed in the Valid ranges list. The range can be expanded after creation using expandIpCidrRange. */
       ipCidrRange?: string;
+      /** Reference to the source of IP, like a PublicDelegatedPrefix (PDP) for BYOIP. The PDP must be a sub-PDP in EXTERNAL_IPV6_SUBNETWORK_CREATION mode. Use one of the following formats to specify a sub-PDP when creating a dual stack subnetwork with external access using BYOIP: - Full resource URL, as in https://www.googleapis.com/compute/v1/projects/projectId/regions/region /publicDelegatedPrefixes/sub-pdp-name - Partial URL, as in - projects/projectId/regions/region/publicDelegatedPrefixes/ sub-pdp-name - regions/region/publicDelegatedPrefixes/sub-pdp-name */
+      ipCollection?: string;
       /** The access type of IPv6 address this subnet holds. It's immutable and can only be specified during creation or the first time the subnet is updated into IPV4_IPV6 dual stack. */
       ipv6AccessType?: string;
       /** [Output Only] This field is for internal use. */
       ipv6CidrRange?: string;
+      /** [Output Only] Possible endpoints of this subnetwork. It can be one of the following: - VM_ONLY: The subnetwork can be used for creating instances and IPv6 addresses with VM endpoint type. Such a subnetwork gets external IPv6 ranges from a public delegated prefix and cannot be used to create NetLb. - VM_AND_FR: The subnetwork can be used for creating both VM instances and Forwarding Rules. It can also be used to reserve IPv6 addresses with both VM and FR endpoint types. Such a subnetwork gets its IPv6 range from Google IP Pool directly. */
+      ipv6GceEndpoint?: string;
       /** [Output Only] Type of the resource. Always compute#subnetwork for Subnetwork resources. */
       kind?: string;
       /** This field denotes the VPC flow logging options for this subnetwork. If logging is enabled, logs are exported to Cloud Logging. */
@@ -29203,51 +29526,8 @@ declare namespace gapi.client {
         body: TestPermissionsRequest
       ): Request<TestPermissionsResponse>;
     }
-    interface InterconnectAttachmentsResource {
-      /** Retrieves an aggregated list of interconnect attachments. To prevent failure, Google recommends that you set the `returnPartialSuccess` parameter to `true`. */
-      aggregatedList(request?: {
-        /** V1 error format. */
-        '$.xgafv'?: string;
-        /** OAuth access token. */
-        access_token?: string;
-        /** Data format for response. */
-        alt?: string;
-        /** JSONP */
-        callback?: string;
-        /** Selector specifying which fields to include in a partial response. */
-        fields?: string;
-        /** A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions. */
-        filter?: string;
-        /** Indicates whether every visible scope for each scope type (zone, region, global) should be included in the response. For new resource types added after this field, the flag has no effect as new resource types will always include every visible scope for each scope type in response. For resource types which predate this field, if this flag is omitted or false, only scopes of the scope types where the resource type is expected to be found will be included. */
-        includeAllScopes?: boolean;
-        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
-        key?: string;
-        /** The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`) */
-        maxResults?: number;
-        /** OAuth 2.0 token for the current user. */
-        oauth_token?: string;
-        /** Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported. */
-        orderBy?: string;
-        /** Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results. */
-        pageToken?: string;
-        /** Returns response with indentations and line breaks. */
-        prettyPrint?: boolean;
-        /** Project ID for this request. */
-        project: string;
-        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
-        quotaUser?: string;
-        /** Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code. */
-        returnPartialSuccess?: boolean;
-        /** The Shared VPC service project id or service project number for which aggregated list request is invoked for subnetworks list-usable api. */
-        serviceProjectNumber?: string;
-        /** Upload protocol for media (e.g. "raw", "multipart"). */
-        upload_protocol?: string;
-        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
-        uploadType?: string;
-        /** Legacy name for parameter that has been superseded by `quotaUser`. */
-        userIp?: string;
-      }): Request<InterconnectAttachmentAggregatedList>;
-      /** Deletes the specified interconnect attachment. */
+    interface InterconnectAttachmentGroupsResource {
+      /** Deletes the specified InterconnectAttachmentGroup in the given scope */
       delete(request?: {
         /** V1 error format. */
         '$.xgafv'?: string;
@@ -29259,8 +29539,8 @@ declare namespace gapi.client {
         callback?: string;
         /** Selector specifying which fields to include in a partial response. */
         fields?: string;
-        /** Name of the interconnect attachment to delete. */
-        interconnectAttachment: string;
+        /** Name of the InterconnectAttachmentGroup resource to delete. */
+        interconnectAttachmentGroup: string;
         /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
         key?: string;
         /** OAuth 2.0 token for the current user. */
@@ -29271,9 +29551,7 @@ declare namespace gapi.client {
         project: string;
         /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
         quotaUser?: string;
-        /** Name of the region for this request. */
-        region: string;
-        /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
+        /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder */
         requestId?: string;
         /** Upload protocol for media (e.g. "raw", "multipart"). */
         upload_protocol?: string;
@@ -29282,7 +29560,7 @@ declare namespace gapi.client {
         /** Legacy name for parameter that has been superseded by `quotaUser`. */
         userIp?: string;
       }): Request<Operation>;
-      /** Returns the specified interconnect attachment. */
+      /** Returns the specified InterconnectAttachmentGroup resource in the given scope. */
       get(request?: {
         /** V1 error format. */
         '$.xgafv'?: string;
@@ -29294,8 +29572,8 @@ declare namespace gapi.client {
         callback?: string;
         /** Selector specifying which fields to include in a partial response. */
         fields?: string;
-        /** Name of the interconnect attachment to return. */
-        interconnectAttachment: string;
+        /** Name of the InterconnectAttachmentGroup resource to return. */
+        interconnectAttachmentGroup: string;
         /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
         key?: string;
         /** OAuth 2.0 token for the current user. */
@@ -29306,15 +29584,13 @@ declare namespace gapi.client {
         project: string;
         /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
         quotaUser?: string;
-        /** Name of the region for this request. */
-        region: string;
         /** Upload protocol for media (e.g. "raw", "multipart"). */
         upload_protocol?: string;
         /** Legacy upload protocol for media (e.g. "media", "multipart"). */
         uploadType?: string;
         /** Legacy name for parameter that has been superseded by `quotaUser`. */
         userIp?: string;
-      }): Request<InterconnectAttachment>;
+      }): Request<InterconnectAttachmentGroup>;
       /** Gets the access control policy for a resource. May be empty if no such policy or resource exists. */
       getIamPolicy(request?: {
         /** V1 error format. */
@@ -29339,8 +29615,6 @@ declare namespace gapi.client {
         project: string;
         /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
         quotaUser?: string;
-        /** The name of the region for this request. */
-        region: string;
         /** Name or id of the resource for this request. */
         resource: string;
         /** Upload protocol for media (e.g. "raw", "multipart"). */
@@ -29350,7 +29624,7 @@ declare namespace gapi.client {
         /** Legacy name for parameter that has been superseded by `quotaUser`. */
         userIp?: string;
       }): Request<Policy>;
-      /** Creates an InterconnectAttachment in the specified project using the data included in the request. */
+      /** Creates a InterconnectAttachmentGroup in the specified project in the given scope using the parameters that are included in the request. */
       insert(request: {
         /** V1 error format. */
         '$.xgafv'?: string;
@@ -29372,9 +29646,7 @@ declare namespace gapi.client {
         project: string;
         /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
         quotaUser?: string;
-        /** Name of the region for this request. */
-        region: string;
-        /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
+        /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder */
         requestId?: string;
         /** Upload protocol for media (e.g. "raw", "multipart"). */
         upload_protocol?: string;
@@ -29382,10 +29654,8 @@ declare namespace gapi.client {
         uploadType?: string;
         /** Legacy name for parameter that has been superseded by `quotaUser`. */
         userIp?: string;
-        /** If true, the request will not be committed. */
-        validateOnly?: boolean;
         /** Request body */
-        resource: InterconnectAttachment;
+        resource: InterconnectAttachmentGroup;
       }): Request<Operation>;
       insert(
         request: {
@@ -29409,9 +29679,7 @@ declare namespace gapi.client {
           project: string;
           /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
           quotaUser?: string;
-          /** Name of the region for this request. */
-          region: string;
-          /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
+          /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder */
           requestId?: string;
           /** Upload protocol for media (e.g. "raw", "multipart"). */
           upload_protocol?: string;
@@ -29419,12 +29687,10 @@ declare namespace gapi.client {
           uploadType?: string;
           /** Legacy name for parameter that has been superseded by `quotaUser`. */
           userIp?: string;
-          /** If true, the request will not be committed. */
-          validateOnly?: boolean;
         },
-        body: InterconnectAttachment
+        body: InterconnectAttachmentGroup
       ): Request<Operation>;
-      /** Retrieves the list of interconnect attachments contained within the specified region. */
+      /** Lists the InterconnectAttachmentGroups for a project in the given scope. */
       list(request?: {
         /** V1 error format. */
         '$.xgafv'?: string;
@@ -29454,8 +29720,6 @@ declare namespace gapi.client {
         project: string;
         /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
         quotaUser?: string;
-        /** Name of the region for this request. */
-        region: string;
         /** Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code. */
         returnPartialSuccess?: boolean;
         /** Upload protocol for media (e.g. "raw", "multipart"). */
@@ -29464,8 +29728,8 @@ declare namespace gapi.client {
         uploadType?: string;
         /** Legacy name for parameter that has been superseded by `quotaUser`. */
         userIp?: string;
-      }): Request<InterconnectAttachmentList>;
-      /** Updates the specified interconnect attachment with the data included in the request. This method supports PATCH semantics and uses the JSON merge patch format and processing rules. */
+      }): Request<InterconnectAttachmentGroupsListResponse>;
+      /** Patches the specified InterconnectAttachmentGroup resource with the data included in the request. This method supports PATCH semantics and uses JSON merge patch format and processing rules. */
       patch(request: {
         /** V1 error format. */
         '$.xgafv'?: string;
@@ -29477,8 +29741,8 @@ declare namespace gapi.client {
         callback?: string;
         /** Selector specifying which fields to include in a partial response. */
         fields?: string;
-        /** Name of the interconnect attachment to patch. */
-        interconnectAttachment: string;
+        /** Name of the InterconnectAttachmentGroup resource to patch. */
+        interconnectAttachmentGroup: string;
         /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
         key?: string;
         /** OAuth 2.0 token for the current user. */
@@ -29489,10 +29753,10 @@ declare namespace gapi.client {
         project: string;
         /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
         quotaUser?: string;
-        /** Name of the region scoping this request. */
-        region: string;
-        /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
+        /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder */
         requestId?: string;
+        /** The list of fields to update. */
+        updateMask?: string;
         /** Upload protocol for media (e.g. "raw", "multipart"). */
         upload_protocol?: string;
         /** Legacy upload protocol for media (e.g. "media", "multipart"). */
@@ -29500,7 +29764,7 @@ declare namespace gapi.client {
         /** Legacy name for parameter that has been superseded by `quotaUser`. */
         userIp?: string;
         /** Request body */
-        resource: InterconnectAttachment;
+        resource: InterconnectAttachmentGroup;
       }): Request<Operation>;
       patch(
         request: {
@@ -29514,8 +29778,8 @@ declare namespace gapi.client {
           callback?: string;
           /** Selector specifying which fields to include in a partial response. */
           fields?: string;
-          /** Name of the interconnect attachment to patch. */
-          interconnectAttachment: string;
+          /** Name of the InterconnectAttachmentGroup resource to patch. */
+          interconnectAttachmentGroup: string;
           /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
           key?: string;
           /** OAuth 2.0 token for the current user. */
@@ -29526,10 +29790,10 @@ declare namespace gapi.client {
           project: string;
           /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
           quotaUser?: string;
-          /** Name of the region scoping this request. */
-          region: string;
-          /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
+          /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder */
           requestId?: string;
+          /** The list of fields to update. */
+          updateMask?: string;
           /** Upload protocol for media (e.g. "raw", "multipart"). */
           upload_protocol?: string;
           /** Legacy upload protocol for media (e.g. "media", "multipart"). */
@@ -29537,7 +29801,7 @@ declare namespace gapi.client {
           /** Legacy name for parameter that has been superseded by `quotaUser`. */
           userIp?: string;
         },
-        body: InterconnectAttachment
+        body: InterconnectAttachmentGroup
       ): Request<Operation>;
       /** Sets the access control policy on the specified resource. Replaces any existing policy. */
       setIamPolicy(
@@ -29562,8 +29826,6 @@ declare namespace gapi.client {
           project: string;
           /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
           quotaUser?: string;
-          /** The name of the region for this request. */
-          region: string;
           /** Name or id of the resource for this request. */
           resource: string;
           /** Upload protocol for media (e.g. "raw", "multipart"). */
@@ -29573,10 +29835,417 @@ declare namespace gapi.client {
           /** Legacy name for parameter that has been superseded by `quotaUser`. */
           userIp?: string;
         },
-        body: RegionSetPolicyRequest
+        body: GlobalSetPolicyRequest
       ): Request<Policy>;
-      /** Sets the labels on an InterconnectAttachment. To learn more about labels, read the Labeling Resources documentation. */
-      setLabels(
+      /** Returns permissions that a caller has on the specified resource. */
+      testIamPermissions(
+        request: {
+          /** V1 error format. */
+          '$.xgafv'?: string;
+          /** OAuth access token. */
+          access_token?: string;
+          /** Data format for response. */
+          alt?: string;
+          /** JSONP */
+          callback?: string;
+          /** Selector specifying which fields to include in a partial response. */
+          fields?: string;
+          /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+          key?: string;
+          /** OAuth 2.0 token for the current user. */
+          oauth_token?: string;
+          /** Returns response with indentations and line breaks. */
+          prettyPrint?: boolean;
+          /** Project ID for this request. */
+          project: string;
+          /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+          quotaUser?: string;
+          /** Name or id of the resource for this request. */
+          resource: string;
+          /** Upload protocol for media (e.g. "raw", "multipart"). */
+          upload_protocol?: string;
+          /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+          uploadType?: string;
+          /** Legacy name for parameter that has been superseded by `quotaUser`. */
+          userIp?: string;
+        },
+        body: TestPermissionsRequest
+      ): Request<TestPermissionsResponse>;
+    }
+    interface InterconnectAttachmentsResource {
+      /** Retrieves an aggregated list of interconnect attachments. To prevent failure, Google recommends that you set the `returnPartialSuccess` parameter to `true`. */
+      aggregatedList(request?: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions. */
+        filter?: string;
+        /** Indicates whether every visible scope for each scope type (zone, region, global) should be included in the response. For new resource types added after this field, the flag has no effect as new resource types will always include every visible scope for each scope type in response. For resource types which predate this field, if this flag is omitted or false, only scopes of the scope types where the resource type is expected to be found will be included. */
+        includeAllScopes?: boolean;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`) */
+        maxResults?: number;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported. */
+        orderBy?: string;
+        /** Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results. */
+        pageToken?: string;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code. */
+        returnPartialSuccess?: boolean;
+        /** The Shared VPC service project id or service project number for which aggregated list request is invoked for subnetworks list-usable api. */
+        serviceProjectNumber?: string;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+      }): Request<InterconnectAttachmentAggregatedList>;
+      /** Deletes the specified interconnect attachment. */
+      delete(request?: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** Name of the interconnect attachment to delete. */
+        interconnectAttachment: string;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** Name of the region for this request. */
+        region: string;
+        /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
+        requestId?: string;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+      }): Request<Operation>;
+      /** Returns the specified interconnect attachment. */
+      get(request?: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** Name of the interconnect attachment to return. */
+        interconnectAttachment: string;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** Name of the region for this request. */
+        region: string;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+      }): Request<InterconnectAttachment>;
+      /** Gets the access control policy for a resource. May be empty if no such policy or resource exists. */
+      getIamPolicy(request?: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Requested IAM Policy version. */
+        optionsRequestedPolicyVersion?: number;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** The name of the region for this request. */
+        region: string;
+        /** Name or id of the resource for this request. */
+        resource: string;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+      }): Request<Policy>;
+      /** Creates an InterconnectAttachment in the specified project using the data included in the request. */
+      insert(request: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** Name of the region for this request. */
+        region: string;
+        /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
+        requestId?: string;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+        /** If true, the request will not be committed. */
+        validateOnly?: boolean;
+        /** Request body */
+        resource: InterconnectAttachment;
+      }): Request<Operation>;
+      insert(
+        request: {
+          /** V1 error format. */
+          '$.xgafv'?: string;
+          /** OAuth access token. */
+          access_token?: string;
+          /** Data format for response. */
+          alt?: string;
+          /** JSONP */
+          callback?: string;
+          /** Selector specifying which fields to include in a partial response. */
+          fields?: string;
+          /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+          key?: string;
+          /** OAuth 2.0 token for the current user. */
+          oauth_token?: string;
+          /** Returns response with indentations and line breaks. */
+          prettyPrint?: boolean;
+          /** Project ID for this request. */
+          project: string;
+          /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+          quotaUser?: string;
+          /** Name of the region for this request. */
+          region: string;
+          /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
+          requestId?: string;
+          /** Upload protocol for media (e.g. "raw", "multipart"). */
+          upload_protocol?: string;
+          /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+          uploadType?: string;
+          /** Legacy name for parameter that has been superseded by `quotaUser`. */
+          userIp?: string;
+          /** If true, the request will not be committed. */
+          validateOnly?: boolean;
+        },
+        body: InterconnectAttachment
+      ): Request<Operation>;
+      /** Retrieves the list of interconnect attachments contained within the specified region. */
+      list(request?: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions. */
+        filter?: string;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`) */
+        maxResults?: number;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported. */
+        orderBy?: string;
+        /** Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results. */
+        pageToken?: string;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** Name of the region for this request. */
+        region: string;
+        /** Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code. */
+        returnPartialSuccess?: boolean;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+      }): Request<InterconnectAttachmentList>;
+      /** Updates the specified interconnect attachment with the data included in the request. This method supports PATCH semantics and uses the JSON merge patch format and processing rules. */
+      patch(request: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** Name of the interconnect attachment to patch. */
+        interconnectAttachment: string;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** Name of the region scoping this request. */
+        region: string;
+        /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
+        requestId?: string;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+        /** Request body */
+        resource: InterconnectAttachment;
+      }): Request<Operation>;
+      patch(
+        request: {
+          /** V1 error format. */
+          '$.xgafv'?: string;
+          /** OAuth access token. */
+          access_token?: string;
+          /** Data format for response. */
+          alt?: string;
+          /** JSONP */
+          callback?: string;
+          /** Selector specifying which fields to include in a partial response. */
+          fields?: string;
+          /** Name of the interconnect attachment to patch. */
+          interconnectAttachment: string;
+          /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+          key?: string;
+          /** OAuth 2.0 token for the current user. */
+          oauth_token?: string;
+          /** Returns response with indentations and line breaks. */
+          prettyPrint?: boolean;
+          /** Project ID for this request. */
+          project: string;
+          /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+          quotaUser?: string;
+          /** Name of the region scoping this request. */
+          region: string;
+          /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
+          requestId?: string;
+          /** Upload protocol for media (e.g. "raw", "multipart"). */
+          upload_protocol?: string;
+          /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+          uploadType?: string;
+          /** Legacy name for parameter that has been superseded by `quotaUser`. */
+          userIp?: string;
+        },
+        body: InterconnectAttachment
+      ): Request<Operation>;
+      /** Sets the access control policy on the specified resource. Replaces any existing policy. */
+      setIamPolicy(
+        request: {
+          /** V1 error format. */
+          '$.xgafv'?: string;
+          /** OAuth access token. */
+          access_token?: string;
+          /** Data format for response. */
+          alt?: string;
+          /** JSONP */
+          callback?: string;
+          /** Selector specifying which fields to include in a partial response. */
+          fields?: string;
+          /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+          key?: string;
+          /** OAuth 2.0 token for the current user. */
+          oauth_token?: string;
+          /** Returns response with indentations and line breaks. */
+          prettyPrint?: boolean;
+          /** Project ID for this request. */
+          project: string;
+          /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+          quotaUser?: string;
+          /** The name of the region for this request. */
+          region: string;
+          /** Name or id of the resource for this request. */
+          resource: string;
+          /** Upload protocol for media (e.g. "raw", "multipart"). */
+          upload_protocol?: string;
+          /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+          uploadType?: string;
+          /** Legacy name for parameter that has been superseded by `quotaUser`. */
+          userIp?: string;
+        },
+        body: RegionSetPolicyRequest
+      ): Request<Policy>;
+      /** Sets the labels on an InterconnectAttachment. To learn more about labels, read the Labeling Resources documentation. */
+      setLabels(
         request: {
           /** V1 error format. */
           '$.xgafv'?: string;
@@ -29650,6 +30319,352 @@ declare namespace gapi.client {
         body: TestPermissionsRequest
       ): Request<TestPermissionsResponse>;
     }
+    interface InterconnectGroupsResource {
+      /** Deletes the specified InterconnectGroup in the given scope */
+      delete(request?: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** Name of the InterconnectGroup resource to delete. */
+        interconnectGroup: string;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder */
+        requestId?: string;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+      }): Request<Operation>;
+      /** Returns the specified InterconnectGroup resource in the given scope. */
+      get(request?: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** Name of the InterconnectGroup resource to return. */
+        interconnectGroup: string;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+      }): Request<InterconnectGroup>;
+      /** Gets the access control policy for a resource. May be empty if no such policy or resource exists. */
+      getIamPolicy(request?: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Requested IAM Policy version. */
+        optionsRequestedPolicyVersion?: number;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** Name or id of the resource for this request. */
+        resource: string;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+      }): Request<Policy>;
+      /** Creates a InterconnectGroup in the specified project in the given scope using the parameters that are included in the request. */
+      insert(request: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder */
+        requestId?: string;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+        /** Request body */
+        resource: InterconnectGroup;
+      }): Request<Operation>;
+      insert(
+        request: {
+          /** V1 error format. */
+          '$.xgafv'?: string;
+          /** OAuth access token. */
+          access_token?: string;
+          /** Data format for response. */
+          alt?: string;
+          /** JSONP */
+          callback?: string;
+          /** Selector specifying which fields to include in a partial response. */
+          fields?: string;
+          /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+          key?: string;
+          /** OAuth 2.0 token for the current user. */
+          oauth_token?: string;
+          /** Returns response with indentations and line breaks. */
+          prettyPrint?: boolean;
+          /** Project ID for this request. */
+          project: string;
+          /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+          quotaUser?: string;
+          /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder */
+          requestId?: string;
+          /** Upload protocol for media (e.g. "raw", "multipart"). */
+          upload_protocol?: string;
+          /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+          uploadType?: string;
+          /** Legacy name for parameter that has been superseded by `quotaUser`. */
+          userIp?: string;
+        },
+        body: InterconnectGroup
+      ): Request<Operation>;
+      /** Lists the InterconnectGroups for a project in the given scope. */
+      list(request?: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions. */
+        filter?: string;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`) */
+        maxResults?: number;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported. */
+        orderBy?: string;
+        /** Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results. */
+        pageToken?: string;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code. */
+        returnPartialSuccess?: boolean;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+      }): Request<InterconnectGroupsListResponse>;
+      /** Patches the specified InterconnectGroup resource with the data included in the request. This method supports PATCH semantics and uses JSON merge patch format and processing rules. */
+      patch(request: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** Name of the InterconnectGroup resource to patch. */
+        interconnectGroup: string;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder */
+        requestId?: string;
+        /** The list of fields to update. */
+        updateMask?: string;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+        /** Request body */
+        resource: InterconnectGroup;
+      }): Request<Operation>;
+      patch(
+        request: {
+          /** V1 error format. */
+          '$.xgafv'?: string;
+          /** OAuth access token. */
+          access_token?: string;
+          /** Data format for response. */
+          alt?: string;
+          /** JSONP */
+          callback?: string;
+          /** Selector specifying which fields to include in a partial response. */
+          fields?: string;
+          /** Name of the InterconnectGroup resource to patch. */
+          interconnectGroup: string;
+          /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+          key?: string;
+          /** OAuth 2.0 token for the current user. */
+          oauth_token?: string;
+          /** Returns response with indentations and line breaks. */
+          prettyPrint?: boolean;
+          /** Project ID for this request. */
+          project: string;
+          /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+          quotaUser?: string;
+          /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder */
+          requestId?: string;
+          /** The list of fields to update. */
+          updateMask?: string;
+          /** Upload protocol for media (e.g. "raw", "multipart"). */
+          upload_protocol?: string;
+          /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+          uploadType?: string;
+          /** Legacy name for parameter that has been superseded by `quotaUser`. */
+          userIp?: string;
+        },
+        body: InterconnectGroup
+      ): Request<Operation>;
+      /** Sets the access control policy on the specified resource. Replaces any existing policy. */
+      setIamPolicy(
+        request: {
+          /** V1 error format. */
+          '$.xgafv'?: string;
+          /** OAuth access token. */
+          access_token?: string;
+          /** Data format for response. */
+          alt?: string;
+          /** JSONP */
+          callback?: string;
+          /** Selector specifying which fields to include in a partial response. */
+          fields?: string;
+          /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+          key?: string;
+          /** OAuth 2.0 token for the current user. */
+          oauth_token?: string;
+          /** Returns response with indentations and line breaks. */
+          prettyPrint?: boolean;
+          /** Project ID for this request. */
+          project: string;
+          /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+          quotaUser?: string;
+          /** Name or id of the resource for this request. */
+          resource: string;
+          /** Upload protocol for media (e.g. "raw", "multipart"). */
+          upload_protocol?: string;
+          /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+          uploadType?: string;
+          /** Legacy name for parameter that has been superseded by `quotaUser`. */
+          userIp?: string;
+        },
+        body: GlobalSetPolicyRequest
+      ): Request<Policy>;
+      /** Returns permissions that a caller has on the specified resource. */
+      testIamPermissions(
+        request: {
+          /** V1 error format. */
+          '$.xgafv'?: string;
+          /** OAuth access token. */
+          access_token?: string;
+          /** Data format for response. */
+          alt?: string;
+          /** JSONP */
+          callback?: string;
+          /** Selector specifying which fields to include in a partial response. */
+          fields?: string;
+          /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+          key?: string;
+          /** OAuth 2.0 token for the current user. */
+          oauth_token?: string;
+          /** Returns response with indentations and line breaks. */
+          prettyPrint?: boolean;
+          /** Project ID for this request. */
+          project: string;
+          /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+          quotaUser?: string;
+          /** Name or id of the resource for this request. */
+          resource: string;
+          /** Upload protocol for media (e.g. "raw", "multipart"). */
+          upload_protocol?: string;
+          /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+          uploadType?: string;
+          /** Legacy name for parameter that has been superseded by `quotaUser`. */
+          userIp?: string;
+        },
+        body: TestPermissionsRequest
+      ): Request<TestPermissionsResponse>;
+    }
     interface InterconnectLocationsResource {
       /** Returns the details for the specified interconnect location. Gets a list of available interconnect locations by making a list() request. */
       get(request?: {
@@ -43932,10 +44947,185 @@ declare namespace gapi.client {
           project: string;
           /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
           quotaUser?: string;
-          /** The name of the region for this request. */
+          /** The name of the region for this request. */
+          region: string;
+          /** Name or id of the resource for this request. */
+          resource: string;
+          /** Upload protocol for media (e.g. "raw", "multipart"). */
+          upload_protocol?: string;
+          /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+          uploadType?: string;
+          /** Legacy name for parameter that has been superseded by `quotaUser`. */
+          userIp?: string;
+        },
+        body: TestPermissionsRequest
+      ): Request<TestPermissionsResponse>;
+    }
+    interface RegionInstantSnapshotsResource {
+      /** Deletes the specified InstantSnapshot resource. Keep in mind that deleting a single instantSnapshot might not necessarily delete all the data on that instantSnapshot. If any data on the instantSnapshot that is marked for deletion is needed for subsequent instantSnapshots, the data will be moved to the next corresponding instantSnapshot. For more information, see Deleting instantSnapshots. */
+      delete(request?: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** Name of the InstantSnapshot resource to delete. */
+        instantSnapshot: string;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** The name of the region for this request. */
+        region: string;
+        /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
+        requestId?: string;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+      }): Request<Operation>;
+      /** Returns the specified InstantSnapshot resource in the specified region. */
+      get(request?: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** Name of the InstantSnapshot resource to return. */
+        instantSnapshot: string;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** The name of the region for this request. */
+        region: string;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+      }): Request<InstantSnapshot>;
+      /** Gets the access control policy for a resource. May be empty if no such policy or resource exists. */
+      getIamPolicy(request?: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Requested IAM Policy version. */
+        optionsRequestedPolicyVersion?: number;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** The name of the region for this request. */
+        region: string;
+        /** Name or id of the resource for this request. */
+        resource: string;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+      }): Request<Policy>;
+      /** Creates an instant snapshot in the specified region. */
+      insert(request: {
+        /** V1 error format. */
+        '$.xgafv'?: string;
+        /** OAuth access token. */
+        access_token?: string;
+        /** Data format for response. */
+        alt?: string;
+        /** JSONP */
+        callback?: string;
+        /** Selector specifying which fields to include in a partial response. */
+        fields?: string;
+        /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+        key?: string;
+        /** OAuth 2.0 token for the current user. */
+        oauth_token?: string;
+        /** Returns response with indentations and line breaks. */
+        prettyPrint?: boolean;
+        /** Project ID for this request. */
+        project: string;
+        /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+        quotaUser?: string;
+        /** Name of the region for this request. */
+        region: string;
+        /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
+        requestId?: string;
+        /** Upload protocol for media (e.g. "raw", "multipart"). */
+        upload_protocol?: string;
+        /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+        uploadType?: string;
+        /** Legacy name for parameter that has been superseded by `quotaUser`. */
+        userIp?: string;
+        /** Request body */
+        resource: InstantSnapshot;
+      }): Request<Operation>;
+      insert(
+        request: {
+          /** V1 error format. */
+          '$.xgafv'?: string;
+          /** OAuth access token. */
+          access_token?: string;
+          /** Data format for response. */
+          alt?: string;
+          /** JSONP */
+          callback?: string;
+          /** Selector specifying which fields to include in a partial response. */
+          fields?: string;
+          /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+          key?: string;
+          /** OAuth 2.0 token for the current user. */
+          oauth_token?: string;
+          /** Returns response with indentations and line breaks. */
+          prettyPrint?: boolean;
+          /** Project ID for this request. */
+          project: string;
+          /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+          quotaUser?: string;
+          /** Name of the region for this request. */
           region: string;
-          /** Name or id of the resource for this request. */
-          resource: string;
+          /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
+          requestId?: string;
           /** Upload protocol for media (e.g. "raw", "multipart"). */
           upload_protocol?: string;
           /** Legacy upload protocol for media (e.g. "media", "multipart"). */
@@ -43943,12 +45133,10 @@ declare namespace gapi.client {
           /** Legacy name for parameter that has been superseded by `quotaUser`. */
           userIp?: string;
         },
-        body: TestPermissionsRequest
-      ): Request<TestPermissionsResponse>;
-    }
-    interface RegionInstantSnapshotsResource {
-      /** Deletes the specified InstantSnapshot resource. Keep in mind that deleting a single instantSnapshot might not necessarily delete all the data on that instantSnapshot. If any data on the instantSnapshot that is marked for deletion is needed for subsequent instantSnapshots, the data will be moved to the next corresponding instantSnapshot. For more information, see Deleting instantSnapshots. */
-      delete(request?: {
+        body: InstantSnapshot
+      ): Request<Operation>;
+      /** Retrieves the list of InstantSnapshot resources contained within the specified region. */
+      list(request?: {
         /** V1 error format. */
         '$.xgafv'?: string;
         /** OAuth access token. */
@@ -43959,12 +45147,18 @@ declare namespace gapi.client {
         callback?: string;
         /** Selector specifying which fields to include in a partial response. */
         fields?: string;
-        /** Name of the InstantSnapshot resource to delete. */
-        instantSnapshot: string;
+        /** A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using Google RE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions. */
+        filter?: string;
         /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
         key?: string;
+        /** The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`) */
+        maxResults?: number;
         /** OAuth 2.0 token for the current user. */
         oauth_token?: string;
+        /** Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported. */
+        orderBy?: string;
+        /** Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results. */
+        pageToken?: string;
         /** Returns response with indentations and line breaks. */
         prettyPrint?: boolean;
         /** Project ID for this request. */
@@ -43973,17 +45167,129 @@ declare namespace gapi.client {
         quotaUser?: string;
         /** The name of the region for this request. */
         region: string;
-        /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
-        requestId?: string;
+        /** Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code. */
+        returnPartialSuccess?: boolean;
         /** Upload protocol for media (e.g. "raw", "multipart"). */
         upload_protocol?: string;
         /** Legacy upload protocol for media (e.g. "media", "multipart"). */
         uploadType?: string;
         /** Legacy name for parameter that has been superseded by `quotaUser`. */
         userIp?: string;
-      }): Request<Operation>;
-      /** Returns the specified InstantSnapshot resource in the specified region. */
-      get(request?: {
+      }): Request<InstantSnapshotList>;
+      /** Sets the access control policy on the specified resource. Replaces any existing policy. */
+      setIamPolicy(
+        request: {
+          /** V1 error format. */
+          '$.xgafv'?: string;
+          /** OAuth access token. */
+          access_token?: string;
+          /** Data format for response. */
+          alt?: string;
+          /** JSONP */
+          callback?: string;
+          /** Selector specifying which fields to include in a partial response. */
+          fields?: string;
+          /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+          key?: string;
+          /** OAuth 2.0 token for the current user. */
+          oauth_token?: string;
+          /** Returns response with indentations and line breaks. */
+          prettyPrint?: boolean;
+          /** Project ID for this request. */
+          project: string;
+          /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+          quotaUser?: string;
+          /** The name of the region for this request. */
+          region: string;
+          /** Name or id of the resource for this request. */
+          resource: string;
+          /** Upload protocol for media (e.g. "raw", "multipart"). */
+          upload_protocol?: string;
+          /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+          uploadType?: string;
+          /** Legacy name for parameter that has been superseded by `quotaUser`. */
+          userIp?: string;
+        },
+        body: RegionSetPolicyRequest
+      ): Request<Policy>;
+      /** Sets the labels on a instantSnapshot in the given region. To learn more about labels, read the Labeling Resources documentation. */
+      setLabels(
+        request: {
+          /** V1 error format. */
+          '$.xgafv'?: string;
+          /** OAuth access token. */
+          access_token?: string;
+          /** Data format for response. */
+          alt?: string;
+          /** JSONP */
+          callback?: string;
+          /** Selector specifying which fields to include in a partial response. */
+          fields?: string;
+          /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+          key?: string;
+          /** OAuth 2.0 token for the current user. */
+          oauth_token?: string;
+          /** Returns response with indentations and line breaks. */
+          prettyPrint?: boolean;
+          /** Project ID for this request. */
+          project: string;
+          /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+          quotaUser?: string;
+          /** The region for this request. */
+          region: string;
+          /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
+          requestId?: string;
+          /** Name or id of the resource for this request. */
+          resource: string;
+          /** Upload protocol for media (e.g. "raw", "multipart"). */
+          upload_protocol?: string;
+          /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+          uploadType?: string;
+          /** Legacy name for parameter that has been superseded by `quotaUser`. */
+          userIp?: string;
+        },
+        body: RegionSetLabelsRequest
+      ): Request<Operation>;
+      /** Returns permissions that a caller has on the specified resource. */
+      testIamPermissions(
+        request: {
+          /** V1 error format. */
+          '$.xgafv'?: string;
+          /** OAuth access token. */
+          access_token?: string;
+          /** Data format for response. */
+          alt?: string;
+          /** JSONP */
+          callback?: string;
+          /** Selector specifying which fields to include in a partial response. */
+          fields?: string;
+          /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
+          key?: string;
+          /** OAuth 2.0 token for the current user. */
+          oauth_token?: string;
+          /** Returns response with indentations and line breaks. */
+          prettyPrint?: boolean;
+          /** Project ID for this request. */
+          project: string;
+          /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
+          quotaUser?: string;
+          /** The name of the region for this request. */
+          region: string;
+          /** Name or id of the resource for this request. */
+          resource: string;
+          /** Upload protocol for media (e.g. "raw", "multipart"). */
+          upload_protocol?: string;
+          /** Legacy upload protocol for media (e.g. "media", "multipart"). */
+          uploadType?: string;
+          /** Legacy name for parameter that has been superseded by `quotaUser`. */
+          userIp?: string;
+        },
+        body: TestPermissionsRequest
+      ): Request<TestPermissionsResponse>;
+    }
+    interface RegionMultiMigsResource {
+      /** Deletes a multi-MIG in the specified project. */
+      delete(request?: {
         /** V1 error format. */
         '$.xgafv'?: string;
         /** OAuth access token. */
@@ -43994,10 +45300,10 @@ declare namespace gapi.client {
         callback?: string;
         /** Selector specifying which fields to include in a partial response. */
         fields?: string;
-        /** Name of the InstantSnapshot resource to return. */
-        instantSnapshot: string;
         /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
         key?: string;
+        /** Name of the multi-MIG to delete. */
+        multiMig: string;
         /** OAuth 2.0 token for the current user. */
         oauth_token?: string;
         /** Returns response with indentations and line breaks. */
@@ -44006,17 +45312,19 @@ declare namespace gapi.client {
         project: string;
         /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
         quotaUser?: string;
-        /** The name of the region for this request. */
+        /** Name of the region for this request. */
         region: string;
+        /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
+        requestId?: string;
         /** Upload protocol for media (e.g. "raw", "multipart"). */
         upload_protocol?: string;
         /** Legacy upload protocol for media (e.g. "media", "multipart"). */
         uploadType?: string;
         /** Legacy name for parameter that has been superseded by `quotaUser`. */
         userIp?: string;
-      }): Request<InstantSnapshot>;
-      /** Gets the access control policy for a resource. May be empty if no such policy or resource exists. */
-      getIamPolicy(request?: {
+      }): Request<Operation>;
+      /** Returns the specified multi-MIG resource. */
+      get(request?: {
         /** V1 error format. */
         '$.xgafv'?: string;
         /** OAuth access token. */
@@ -44029,28 +45337,26 @@ declare namespace gapi.client {
         fields?: string;
         /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
         key?: string;
+        /** Name of the multi-MIG resource to return. */
+        multiMig: string;
         /** OAuth 2.0 token for the current user. */
         oauth_token?: string;
-        /** Requested IAM Policy version. */
-        optionsRequestedPolicyVersion?: number;
         /** Returns response with indentations and line breaks. */
         prettyPrint?: boolean;
         /** Project ID for this request. */
         project: string;
         /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
         quotaUser?: string;
-        /** The name of the region for this request. */
+        /** Name of the region for this request. */
         region: string;
-        /** Name or id of the resource for this request. */
-        resource: string;
         /** Upload protocol for media (e.g. "raw", "multipart"). */
         upload_protocol?: string;
         /** Legacy upload protocol for media (e.g. "media", "multipart"). */
         uploadType?: string;
         /** Legacy name for parameter that has been superseded by `quotaUser`. */
         userIp?: string;
-      }): Request<Policy>;
-      /** Creates an instant snapshot in the specified region. */
+      }): Request<MultiMig>;
+      /** Creates a multi-MIG in the specified project. */
       insert(request: {
         /** V1 error format. */
         '$.xgafv'?: string;
@@ -44083,7 +45389,7 @@ declare namespace gapi.client {
         /** Legacy name for parameter that has been superseded by `quotaUser`. */
         userIp?: string;
         /** Request body */
-        resource: InstantSnapshot;
+        resource: MultiMig;
       }): Request<Operation>;
       insert(
         request: {
@@ -44118,9 +45424,9 @@ declare namespace gapi.client {
           /** Legacy name for parameter that has been superseded by `quotaUser`. */
           userIp?: string;
         },
-        body: InstantSnapshot
+        body: MultiMig
       ): Request<Operation>;
-      /** Retrieves the list of InstantSnapshot resources contained within the specified region. */
+      /** Retrieves a list of multi-MIGs in a project and region. */
       list(request?: {
         /** V1 error format. */
         '$.xgafv'?: string;
@@ -44150,7 +45456,7 @@ declare namespace gapi.client {
         project: string;
         /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
         quotaUser?: string;
-        /** The name of the region for this request. */
+        /** Name of the region for this request. */
         region: string;
         /** Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code. */
         returnPartialSuccess?: boolean;
@@ -44160,117 +45466,7 @@ declare namespace gapi.client {
         uploadType?: string;
         /** Legacy name for parameter that has been superseded by `quotaUser`. */
         userIp?: string;
-      }): Request<InstantSnapshotList>;
-      /** Sets the access control policy on the specified resource. Replaces any existing policy. */
-      setIamPolicy(
-        request: {
-          /** V1 error format. */
-          '$.xgafv'?: string;
-          /** OAuth access token. */
-          access_token?: string;
-          /** Data format for response. */
-          alt?: string;
-          /** JSONP */
-          callback?: string;
-          /** Selector specifying which fields to include in a partial response. */
-          fields?: string;
-          /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
-          key?: string;
-          /** OAuth 2.0 token for the current user. */
-          oauth_token?: string;
-          /** Returns response with indentations and line breaks. */
-          prettyPrint?: boolean;
-          /** Project ID for this request. */
-          project: string;
-          /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
-          quotaUser?: string;
-          /** The name of the region for this request. */
-          region: string;
-          /** Name or id of the resource for this request. */
-          resource: string;
-          /** Upload protocol for media (e.g. "raw", "multipart"). */
-          upload_protocol?: string;
-          /** Legacy upload protocol for media (e.g. "media", "multipart"). */
-          uploadType?: string;
-          /** Legacy name for parameter that has been superseded by `quotaUser`. */
-          userIp?: string;
-        },
-        body: RegionSetPolicyRequest
-      ): Request<Policy>;
-      /** Sets the labels on a instantSnapshot in the given region. To learn more about labels, read the Labeling Resources documentation. */
-      setLabels(
-        request: {
-          /** V1 error format. */
-          '$.xgafv'?: string;
-          /** OAuth access token. */
-          access_token?: string;
-          /** Data format for response. */
-          alt?: string;
-          /** JSONP */
-          callback?: string;
-          /** Selector specifying which fields to include in a partial response. */
-          fields?: string;
-          /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
-          key?: string;
-          /** OAuth 2.0 token for the current user. */
-          oauth_token?: string;
-          /** Returns response with indentations and line breaks. */
-          prettyPrint?: boolean;
-          /** Project ID for this request. */
-          project: string;
-          /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
-          quotaUser?: string;
-          /** The region for this request. */
-          region: string;
-          /** An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000). */
-          requestId?: string;
-          /** Name or id of the resource for this request. */
-          resource: string;
-          /** Upload protocol for media (e.g. "raw", "multipart"). */
-          upload_protocol?: string;
-          /** Legacy upload protocol for media (e.g. "media", "multipart"). */
-          uploadType?: string;
-          /** Legacy name for parameter that has been superseded by `quotaUser`. */
-          userIp?: string;
-        },
-        body: RegionSetLabelsRequest
-      ): Request<Operation>;
-      /** Returns permissions that a caller has on the specified resource. */
-      testIamPermissions(
-        request: {
-          /** V1 error format. */
-          '$.xgafv'?: string;
-          /** OAuth access token. */
-          access_token?: string;
-          /** Data format for response. */
-          alt?: string;
-          /** JSONP */
-          callback?: string;
-          /** Selector specifying which fields to include in a partial response. */
-          fields?: string;
-          /** API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token. */
-          key?: string;
-          /** OAuth 2.0 token for the current user. */
-          oauth_token?: string;
-          /** Returns response with indentations and line breaks. */
-          prettyPrint?: boolean;
-          /** Project ID for this request. */
-          project: string;
-          /** Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters. */
-          quotaUser?: string;
-          /** The name of the region for this request. */
-          region: string;
-          /** Name or id of the resource for this request. */
-          resource: string;
-          /** Upload protocol for media (e.g. "raw", "multipart"). */
-          upload_protocol?: string;
-          /** Legacy upload protocol for media (e.g. "media", "multipart"). */
-          uploadType?: string;
-          /** Legacy name for parameter that has been superseded by `quotaUser`. */
-          userIp?: string;
-        },
-        body: TestPermissionsRequest
-      ): Request<TestPermissionsResponse>;
+      }): Request<MultiMigsList>;
     }
     interface RegionNetworkEndpointGroupsResource {
       /** Attach a list of network endpoints to the specified network endpoint group. */
@@ -59990,8 +61186,12 @@ declare namespace gapi.client {
 
     const instantSnapshots: InstantSnapshotsResource;
 
+    const interconnectAttachmentGroups: InterconnectAttachmentGroupsResource;
+
     const interconnectAttachments: InterconnectAttachmentsResource;
 
+    const interconnectGroups: InterconnectGroupsResource;
+
     const interconnectLocations: InterconnectLocationsResource;
 
     const interconnectRemoteLocations: InterconnectRemoteLocationsResource;
@@ -60064,6 +61264,8 @@ declare namespace gapi.client {
 
     const regionInstantSnapshots: RegionInstantSnapshotsResource;
 
+    const regionMultiMigs: RegionMultiMigsResource;
+
     const regionNetworkEndpointGroups: RegionNetworkEndpointGroupsResource;
 
     const regionNetworkFirewallPolicies: RegionNetworkFirewallPoliciesResource;