@mavogel/awscdk-rootmail 0.0.20 → 0.0.21

package/node_modules/@aws-sdk/client-s3/dist-types/models/models_1.d.ts

@@ -7,22 +7,21 @@ import { S3ServiceException as __BaseException } from "./S3ServiceException";
  */
 export interface PutBucketReplicationRequest {
     /**
-     * @public
      * <p>The name of the bucket</p>
      * <p>Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies.
      * For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues</p>
+     * @public
      */
     Bucket: string | undefined;
     /**
-     * @public
      * <p>The base64-encoded 128-bit MD5 digest of the data. You must use this header as a message
      *          integrity check to verify that the request body was not corrupted in transit. For more
      *          information, see <a href="http://www.ietf.org/rfc/rfc1864.txt">RFC 1864</a>.</p>
      *          <p>For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.</p>
+     * @public
      */
     ContentMD5?: string;
     /**
-     * @public
      * <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any
      *     additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or
      *     <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more
@@ -30,33 +29,34 @@ export interface PutBucketReplicationRequest {
      *     the <i>Amazon S3 User Guide</i>.</p>
      *          <p>If you provide an individual checksum, Amazon S3 ignores any provided
      *             <code>ChecksumAlgorithm</code> parameter.</p>
+     * @public
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
-     * @public
      * <p>A container for replication rules. You can add up to 1,000 rules. The maximum size of a
      *          replication configuration is 2 MB.</p>
+     * @public
      */
     ReplicationConfiguration: ReplicationConfiguration | undefined;
     /**
-     * @public
      * <p>A token to allow Object Lock to be enabled for an existing bucket.</p>
+     * @public
      */
     Token?: string;
     /**
-     * @public
      * <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedBucketOwner?: string;
 }
 /**
- * @public
  * <p>Container for Payer.</p>
+ * @public
  */
 export interface RequestPaymentConfiguration {
     /**
-     * @public
      * <p>Specifies who pays for the download and request fees.</p>
+     * @public
      */
     Payer: Payer | undefined;
 }
@@ -65,22 +65,21 @@ export interface RequestPaymentConfiguration {
  */
 export interface PutBucketRequestPaymentRequest {
     /**
-     * @public
      * <p>The bucket name.</p>
      * <p>Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies.
      * For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues</p>
+     * @public
      */
     Bucket: string | undefined;
     /**
-     * @public
      * <p>The base64-encoded 128-bit MD5 digest of the data. You must use this header as a message
      *          integrity check to verify that the request body was not corrupted in transit. For more
      *          information, see <a href="http://www.ietf.org/rfc/rfc1864.txt">RFC 1864</a>.</p>
      *          <p>For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.</p>
+     * @public
      */
     ContentMD5?: string;
     /**
-     * @public
      * <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any
      *     additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or
      *     <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more
@@ -88,27 +87,28 @@ export interface PutBucketRequestPaymentRequest {
      *     the <i>Amazon S3 User Guide</i>.</p>
      *          <p>If you provide an individual checksum, Amazon S3 ignores any provided
      *             <code>ChecksumAlgorithm</code> parameter.</p>
+     * @public
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
-     * @public
      * <p>Container for Payer.</p>
+     * @public
      */
     RequestPaymentConfiguration: RequestPaymentConfiguration | undefined;
     /**
-     * @public
      * <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedBucketOwner?: string;
 }
 /**
- * @public
  * <p>Container for <code>TagSet</code> elements.</p>
+ * @public
  */
 export interface Tagging {
     /**
-     * @public
      * <p>A collection for a set of tags</p>
+     * @public
      */
     TagSet: Tag[] | undefined;
 }
@@ -117,22 +117,21 @@ export interface Tagging {
  */
 export interface PutBucketTaggingRequest {
     /**
-     * @public
      * <p>The bucket name.</p>
      * <p>Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies.
      * For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues</p>
+     * @public
      */
     Bucket: string | undefined;
     /**
-     * @public
      * <p>The base64-encoded 128-bit MD5 digest of the data. You must use this header as a message
      *          integrity check to verify that the request body was not corrupted in transit. For more
      *          information, see <a href="http://www.ietf.org/rfc/rfc1864.txt">RFC 1864</a>.</p>
      *          <p>For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.</p>
+     * @public
      */
     ContentMD5?: string;
     /**
-     * @public
      * <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any
      *     additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or
      *     <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more
@@ -140,16 +139,17 @@ export interface PutBucketTaggingRequest {
      *     the <i>Amazon S3 User Guide</i>.</p>
      *          <p>If you provide an individual checksum, Amazon S3 ignores any provided
      *             <code>ChecksumAlgorithm</code> parameter.</p>
+     * @public
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
-     * @public
      * <p>Container for the <code>TagSet</code> and <code>Tag</code> elements.</p>
+     * @public
      */
     Tagging: Tagging | undefined;
     /**
-     * @public
      * <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedBucketOwner?: string;
 }
@@ -166,21 +166,21 @@ export declare const MFADelete: {
  */
 export type MFADelete = (typeof MFADelete)[keyof typeof MFADelete];
 /**
- * @public
  * <p>Describes the versioning state of an Amazon S3 bucket. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketPUTVersioningStatus.html">PUT
  *             Bucket versioning</a> in the <i>Amazon S3 API Reference</i>.</p>
+ * @public
  */
 export interface VersioningConfiguration {
     /**
-     * @public
      * <p>Specifies whether MFA delete is enabled in the bucket versioning configuration. This
      *          element is only returned if the bucket has been configured with MFA delete. If the bucket
      *          has never been so configured, this element is not returned.</p>
+     * @public
      */
     MFADelete?: MFADelete;
     /**
-     * @public
      * <p>The versioning state of the bucket.</p>
+     * @public
      */
     Status?: BucketVersioningStatus;
 }
@@ -189,23 +189,22 @@ export interface VersioningConfiguration {
  */
 export interface PutBucketVersioningRequest {
     /**
-     * @public
      * <p>The bucket name.</p>
      * <p>Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies.
      * For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues</p>
+     * @public
      */
     Bucket: string | undefined;
     /**
-     * @public
      * <p>>The base64-encoded 128-bit MD5 digest of the data. You must use this header as a
      *          message integrity check to verify that the request body was not corrupted in transit. For
      *          more information, see <a href="http://www.ietf.org/rfc/rfc1864.txt">RFC
      *          1864</a>.</p>
      *          <p>For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.</p>
+     * @public
      */
     ContentMD5?: string;
     /**
-     * @public
      * <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any
      *     additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or
      *     <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more
@@ -213,51 +212,52 @@ export interface PutBucketVersioningRequest {
      *     the <i>Amazon S3 User Guide</i>.</p>
      *          <p>If you provide an individual checksum, Amazon S3 ignores any provided
      *             <code>ChecksumAlgorithm</code> parameter.</p>
+     * @public
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
-     * @public
      * <p>The concatenation of the authentication device's serial number, a space, and the value
      *          that is displayed on your authentication device.</p>
+     * @public
      */
     MFA?: string;
     /**
-     * @public
      * <p>Container for setting the versioning state.</p>
+     * @public
      */
     VersioningConfiguration: VersioningConfiguration | undefined;
     /**
-     * @public
      * <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedBucketOwner?: string;
 }
 /**
- * @public
  * <p>Specifies website configuration parameters for an Amazon S3 bucket.</p>
+ * @public
  */
 export interface WebsiteConfiguration {
     /**
-     * @public
      * <p>The name of the error document for the website.</p>
+     * @public
      */
     ErrorDocument?: ErrorDocument;
     /**
-     * @public
      * <p>The name of the index document for the website.</p>
+     * @public
      */
     IndexDocument?: IndexDocument;
     /**
-     * @public
      * <p>The redirect behavior for every request to this bucket's website endpoint.</p>
      *          <important>
      *             <p>If you specify this property, you can't specify any other property.</p>
      *          </important>
+     * @public
      */
     RedirectAllRequestsTo?: RedirectAllRequestsTo;
     /**
-     * @public
      * <p>Rules that define when a redirect is applied and the redirect behavior.</p>
+     * @public
      */
     RoutingRules?: RoutingRule[];
 }
@@ -266,22 +266,21 @@ export interface WebsiteConfiguration {
  */
 export interface PutBucketWebsiteRequest {
     /**
-     * @public
      * <p>The bucket name.</p>
      * <p>Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies.
      * For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues</p>
+     * @public
      */
     Bucket: string | undefined;
     /**
-     * @public
      * <p>The base64-encoded 128-bit MD5 digest of the data. You must use this header as a message
      *          integrity check to verify that the request body was not corrupted in transit. For more
      *          information, see <a href="http://www.ietf.org/rfc/rfc1864.txt">RFC 1864</a>.</p>
      *          <p>For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.</p>
+     * @public
      */
     ContentMD5?: string;
     /**
-     * @public
      * <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any
      *     additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or
      *     <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more
@@ -289,16 +288,17 @@ export interface PutBucketWebsiteRequest {
      *     the <i>Amazon S3 User Guide</i>.</p>
      *          <p>If you provide an individual checksum, Amazon S3 ignores any provided
      *             <code>ChecksumAlgorithm</code> parameter.</p>
+     * @public
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
-     * @public
      * <p>Container for the request.</p>
+     * @public
      */
     WebsiteConfiguration: WebsiteConfiguration | undefined;
     /**
-     * @public
      * <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedBucketOwner?: string;
 }
@@ -307,7 +307,6 @@ export interface PutBucketWebsiteRequest {
  */
 export interface PutObjectOutput {
     /**
-     * @public
      * <p>If the expiration is configured for the object (see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutBucketLifecycleConfiguration.html">PutBucketLifecycleConfiguration</a>) in the <i>Amazon S3 User Guide</i>, the response includes this header. It
      *          includes the <code>expiry-date</code> and <code>rule-id</code> key-value pairs that provide
      *          information about object expiration. The value of the <code>rule-id</code> is
@@ -315,10 +314,10 @@ export interface PutObjectOutput {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     Expiration?: string;
     /**
-     * @public
      * <p>Entity tag for the uploaded object.</p>
      *          <p>
      *             <b>General purpose buckets </b> - To ensure that data is not corrupted traversing the network,
@@ -327,51 +326,51 @@ export interface PutObjectOutput {
      *       the calculated MD5 value.</p>
      *          <p>
      *             <b>Directory buckets </b> - The ETag for the object in a directory bucket isn't the MD5 digest of the object.</p>
+     * @public
      */
     ETag?: string;
     /**
-     * @public
      * <p>The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded
      *     with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated
      *     with multipart uploads, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html#large-object-checksums">
      *     Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumCRC32?: string;
     /**
-     * @public
      * <p>The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded
      *     with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated
      *     with multipart uploads, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html#large-object-checksums">
      *     Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumCRC32C?: string;
     /**
-     * @public
      * <p>The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded
      *     with the object. When you use the API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated
      *     with multipart uploads, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html#large-object-checksums">
      *     Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumSHA1?: string;
     /**
-     * @public
      * <p>The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded
      *     with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated
      *     with multipart uploads, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html#large-object-checksums">
      *     Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumSHA256?: string;
     /**
-     * @public
      * <p>The server-side encryption algorithm used when you store this object in Amazon S3 (for example,
      *             <code>AES256</code>, <code>aws:kms</code>, <code>aws:kms:dsse</code>).</p>
      *          <note>
      *             <p>For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (<code>AES256</code>) is supported.</p>
      *          </note>
+     * @public
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
-     * @public
      * <p>Version ID of the object.</p>
      *          <p>If you enable versioning for a bucket, Amazon S3 automatically generates a unique version ID
      *          for the object being stored. Amazon S3 returns this ID in the response. When you enable
@@ -384,39 +383,39 @@ export interface PutObjectOutput {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     VersionId?: string;
     /**
-     * @public
      * <p>If server-side encryption with a customer-provided encryption key was requested, the
      *          response will include this header to confirm the encryption algorithm that's used.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSECustomerAlgorithm?: string;
     /**
-     * @public
      * <p>If server-side encryption with a customer-provided encryption key was requested, the
      *          response will include this header to provide the round-trip message integrity verification of
      *          the customer-provided encryption key.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSECustomerKeyMD5?: string;
     /**
-     * @public
      * <p>If <code>x-amz-server-side-encryption</code> has a valid value of <code>aws:kms</code>
      *          or <code>aws:kms:dsse</code>, this header indicates the ID of the Key Management Service (KMS)
      *          symmetric encryption customer managed key that was used for the object. </p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSEKMSKeyId?: string;
     /**
-     * @public
      * <p>If present, indicates the Amazon Web Services KMS Encryption Context to use for object encryption. The
      *          value of this header is a base64-encoded UTF-8 string holding JSON with the encryption
      *          context key-value pairs. This value is stored as object metadata and automatically gets
@@ -425,24 +424,25 @@ export interface PutObjectOutput {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSEKMSEncryptionContext?: string;
     /**
-     * @public
      * <p>Indicates whether the uploaded object uses an S3 Bucket Key for server-side encryption
      *          with Key Management Service (KMS) keys (SSE-KMS).</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     BucketKeyEnabled?: boolean;
     /**
-     * @public
      * <p>If present, indicates that the requester was successfully charged for the
      *          request.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestCharged?: RequestCharged;
 }
@@ -451,7 +451,6 @@ export interface PutObjectOutput {
  */
 export interface PutObjectRequest {
     /**
-     * @public
      * <p>The canned ACL to apply to the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#CannedACL">Canned
      *          ACL</a> in the <i>Amazon S3 User Guide</i>.</p>
      *          <p>When adding a new object, you can use headers to grant ACL-based permissions to
@@ -479,21 +478,21 @@ export interface PutObjectRequest {
      *                </li>
      *             </ul>
      *          </note>
+     * @public
      */
     ACL?: ObjectCannedACL;
     /**
-     * @public
      * <p>Object data.</p>
+     * @public
      */
     Body?: StreamingBlobTypes;
     /**
-     * @public
      * <p>The bucket name to which the PUT action was initiated. </p>
      *          <p>
      *             <b>Directory buckets</b> - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format <code>
      *                <i>Bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com</code>. Path-style requests are not supported.  Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format <code>
      *                <i>bucket_base_name</i>--<i>az-id</i>--x-s3</code> (for example, <code>
-     *                <i>DOC-EXAMPLE-BUCKET</i>--<i>usw2-az2</i>--x-s3</code>). For information about bucket naming
+     *                <i>DOC-EXAMPLE-BUCKET</i>--<i>usw2-az1</i>--x-s3</code>). For information about bucket naming
      *          restrictions, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/directory-bucket-naming-rules.html">Directory bucket naming
      *             rules</a> in the <i>Amazon S3 User Guide</i>.</p>
      *          <p>
@@ -506,39 +505,39 @@ export interface PutObjectRequest {
      *                <i>AccessPointName</i>-<i>AccountId</i>.<i>outpostID</i>.s3-outposts.<i>Region</i>.amazonaws.com</code>. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/S3onOutposts.html">What is S3 on Outposts?</a> in the <i>Amazon S3 User Guide</i>.</p>
      * <p>Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies.
      * For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues</p>
+     * @public
      */
     Bucket: string | undefined;
     /**
-     * @public
      * <p>Can be used to specify caching behavior along the request/reply chain. For more
      *          information, see <a href="http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.9">http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.9</a>.</p>
+     * @public
      */
     CacheControl?: string;
     /**
-     * @public
      * <p>Specifies presentational information for the object. For more information, see <a href="https://www.rfc-editor.org/rfc/rfc6266#section-4">https://www.rfc-editor.org/rfc/rfc6266#section-4</a>.</p>
+     * @public
      */
     ContentDisposition?: string;
     /**
-     * @public
      * <p>Specifies what content encodings have been applied to the object and thus what decoding
      *          mechanisms must be applied to obtain the media-type referenced by the Content-Type header
      *          field. For more information, see <a href="https://www.rfc-editor.org/rfc/rfc9110.html#field.content-encoding">https://www.rfc-editor.org/rfc/rfc9110.html#field.content-encoding</a>.</p>
+     * @public
      */
     ContentEncoding?: string;
     /**
-     * @public
      * <p>The language the content is in.</p>
+     * @public
      */
     ContentLanguage?: string;
     /**
-     * @public
      * <p>Size of the body in bytes. This parameter is useful when the size of the body cannot be
      *          determined automatically. For more information, see <a href="https://www.rfc-editor.org/rfc/rfc9110.html#name-content-length">https://www.rfc-editor.org/rfc/rfc9110.html#name-content-length</a>.</p>
+     * @public
      */
     ContentLength?: number;
     /**
-     * @public
      * <p>The base64-encoded 128-bit MD5 digest of the message (without the headers) according to
      *          RFC 1864. This header can be used as a message integrity check to verify that the data is
      *          the same data that was originally sent. Although it is optional, we recommend using the
@@ -553,16 +552,16 @@ export interface PutObjectRequest {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     ContentMD5?: string;
     /**
-     * @public
      * <p>A standard MIME type describing the format of the contents. For more information, see
      *             <a href="https://www.rfc-editor.org/rfc/rfc9110.html#name-content-type">https://www.rfc-editor.org/rfc/rfc9110.html#name-content-type</a>.</p>
+     * @public
      */
     ContentType?: string;
     /**
-     * @public
      * <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any
      *     additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum-<i>algorithm</i>
      *             </code> or
@@ -595,48 +594,48 @@ export interface PutObjectRequest {
      *          <note>
      *             <p>For directory buckets, when you use Amazon Web Services SDKs, <code>CRC32</code> is the default checksum algorithm that's used for performance.</p>
      *          </note>
+     * @public
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
-     * @public
      * <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent.
      *     This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see
      *     <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the
      *     <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumCRC32?: string;
     /**
-     * @public
      * <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent.
      *     This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see
      *     <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the
      *     <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumCRC32C?: string;
     /**
-     * @public
      * <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent.
      *     This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see
      *     <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the
      *     <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumSHA1?: string;
     /**
-     * @public
      * <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent.
      *     This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see
      *     <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the
      *     <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumSHA256?: string;
     /**
-     * @public
      * <p>The date and time at which the object is no longer cacheable. For more information, see
      *             <a href="https://www.rfc-editor.org/rfc/rfc7234#section-5.3">https://www.rfc-editor.org/rfc/rfc7234#section-5.3</a>.</p>
+     * @public
      */
     Expires?: Date;
     /**
-     * @public
      * <p>Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.</p>
      *          <note>
      *             <ul>
@@ -648,10 +647,10 @@ export interface PutObjectRequest {
      *                </li>
      *             </ul>
      *          </note>
+     * @public
      */
     GrantFullControl?: string;
     /**
-     * @public
      * <p>Allows grantee to read the object data and its metadata.</p>
      *          <note>
      *             <ul>
@@ -663,10 +662,10 @@ export interface PutObjectRequest {
      *                </li>
      *             </ul>
      *          </note>
+     * @public
      */
     GrantRead?: string;
     /**
-     * @public
      * <p>Allows grantee to read the object ACL.</p>
      *          <note>
      *             <ul>
@@ -678,10 +677,10 @@ export interface PutObjectRequest {
      *                </li>
      *             </ul>
      *          </note>
+     * @public
      */
     GrantReadACP?: string;
     /**
-     * @public
      * <p>Allows grantee to write the ACL for the applicable object.</p>
      *          <note>
      *             <ul>
@@ -693,20 +692,20 @@ export interface PutObjectRequest {
      *                </li>
      *             </ul>
      *          </note>
+     * @public
      */
     GrantWriteACP?: string;
     /**
-     * @public
      * <p>Object key for which the PUT action was initiated.</p>
+     * @public
      */
     Key: string | undefined;
     /**
-     * @public
      * <p>A map of metadata to store with the object in S3.</p>
+     * @public
      */
     Metadata?: Record<string, string>;
     /**
-     * @public
      * <p>The server-side encryption algorithm that was used when you store this object in Amazon S3 (for example,
      *             <code>AES256</code>, <code>aws:kms</code>, <code>aws:kms:dsse</code>).</p>
      *          <p>
@@ -720,10 +719,10 @@ export interface PutObjectRequest {
      *                   Encryption</a> in the <i>Amazon S3 User Guide</i>.</p>
      *          <p>
      *             <b>Directory buckets </b> - For directory buckets, only the server-side encryption with Amazon S3 managed keys (SSE-S3) (<code>AES256</code>) value is supported.</p>
+     * @public
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
-     * @public
      * <p>By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The
      *          STANDARD storage class provides high durability and high availability. Depending on
      *          performance needs, you can specify a different Storage Class. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/storage-class-intro.html">Storage Classes</a> in the
@@ -739,10 +738,10 @@ export interface PutObjectRequest {
      *                </li>
      *             </ul>
      *          </note>
+     * @public
      */
     StorageClass?: StorageClass;
     /**
-     * @public
      * <p>If the bucket is configured as a website, redirects requests for this object to another
      *          object in the same bucket or to an external URL. Amazon S3 stores the value of this header in
      *          the object metadata. For information about object metadata, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingMetadata.html">Object Key and Metadata</a> in the <i>Amazon S3
@@ -764,19 +763,19 @@ export interface PutObjectRequest {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     WebsiteRedirectLocation?: string;
     /**
-     * @public
      * <p>Specifies the algorithm to use when encrypting the object (for example,
      *          <code>AES256</code>).</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSECustomerAlgorithm?: string;
     /**
-     * @public
      * <p>Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This
      *          value is used to store the object and then it is discarded; Amazon S3 does not store the
      *          encryption key. The key must be appropriate for use with the algorithm specified in the
@@ -784,20 +783,20 @@ export interface PutObjectRequest {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSECustomerKey?: string;
     /**
-     * @public
      * <p>Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses
      *          this header for a message integrity check to ensure that the encryption key was transmitted
      *          without error.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSECustomerKeyMD5?: string;
     /**
-     * @public
      * <p>If <code>x-amz-server-side-encryption</code> has a valid value of <code>aws:kms</code>
      *          or <code>aws:kms:dsse</code>, this header specifies the ID (Key ID, Key ARN, or Key Alias) of the Key Management Service (KMS)
      *          symmetric encryption customer managed key that was used for the object. If you specify
@@ -809,10 +808,10 @@ export interface PutObjectRequest {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSEKMSKeyId?: string;
     /**
-     * @public
      * <p>Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of
      *          this header is a base64-encoded UTF-8 string holding JSON with the encryption context
      *          key-value pairs. This value is stored as object metadata and automatically gets passed on
@@ -821,10 +820,10 @@ export interface PutObjectRequest {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSEKMSEncryptionContext?: string;
     /**
-     * @public
      * <p>Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with
      *          server-side encryption using Key Management Service (KMS) keys (SSE-KMS). Setting this header to
      *             <code>true</code> causes Amazon S3 to use an S3 Bucket Key for object encryption with
@@ -834,10 +833,10 @@ export interface PutObjectRequest {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     BucketKeyEnabled?: boolean;
     /**
-     * @public
      * <p>Confirms that the requester knows that they will be charged for the request. Bucket
      *          owners need not specify this parameter in their requests. If either the source or
      *          destination S3 bucket has Requester Pays enabled, the requester will pay for
@@ -847,46 +846,47 @@ export interface PutObjectRequest {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestPayer?: RequestPayer;
     /**
-     * @public
      * <p>The tag-set for the object. The tag-set must be encoded as URL Query parameters. (For
      *          example, "Key1=Value1")</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     Tagging?: string;
     /**
-     * @public
      * <p>The Object Lock mode that you want to apply to this object.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     ObjectLockMode?: ObjectLockMode;
     /**
-     * @public
      * <p>The date and time when you want this object's Object Lock to expire. Must be formatted
      *          as a timestamp parameter.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     ObjectLockRetainUntilDate?: Date;
     /**
-     * @public
      * <p>Specifies whether a legal hold will be applied to this object. For more information
      *          about S3 Object Lock, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lock.html">Object Lock</a> in the <i>Amazon S3 User Guide</i>.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     ObjectLockLegalHoldStatus?: ObjectLockLegalHoldStatus;
     /**
-     * @public
      * <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedBucketOwner?: string;
 }
@@ -895,12 +895,12 @@ export interface PutObjectRequest {
  */
 export interface PutObjectAclOutput {
     /**
-     * @public
      * <p>If present, indicates that the requester was successfully charged for the
      *          request.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestCharged?: RequestCharged;
 }
@@ -909,18 +909,17 @@ export interface PutObjectAclOutput {
  */
 export interface PutObjectAclRequest {
     /**
-     * @public
      * <p>The canned ACL to apply to the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#CannedACL">Canned
      *             ACL</a>.</p>
+     * @public
      */
     ACL?: ObjectCannedACL;
     /**
-     * @public
      * <p>Contains the elements that set the ACL permissions for an object per grantee.</p>
+     * @public
      */
     AccessControlPolicy?: AccessControlPolicy;
     /**
-     * @public
      * <p>The bucket name that contains the object to which you want to attach the ACL. </p>
      *          <p>
      *             <b>Access points</b> - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form <i>AccessPointName</i>-<i>AccountId</i>.s3-accesspoint.<i>Region</i>.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-access-points.html">Using access points</a> in the <i>Amazon S3 User Guide</i>.</p>
@@ -929,20 +928,20 @@ export interface PutObjectAclRequest {
      *                <i>AccessPointName</i>-<i>AccountId</i>.<i>outpostID</i>.s3-outposts.<i>Region</i>.amazonaws.com</code>. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/S3onOutposts.html">What is S3 on Outposts?</a> in the <i>Amazon S3 User Guide</i>.</p>
      * <p>Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies.
      * For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues</p>
+     * @public
      */
     Bucket: string | undefined;
     /**
-     * @public
      * <p>The base64-encoded 128-bit MD5 digest of the data. This header must be used as a message
      *          integrity check to verify that the request body was not corrupted in transit. For more
      *          information, go to <a href="http://www.ietf.org/rfc/rfc1864.txt">RFC
      *          1864.></a>
      *          </p>
      *          <p>For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.</p>
+     * @public
      */
     ContentMD5?: string;
     /**
-     * @public
      * <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any
      *     additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or
      *     <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more
@@ -950,47 +949,47 @@ export interface PutObjectAclRequest {
      *     the <i>Amazon S3 User Guide</i>.</p>
      *          <p>If you provide an individual checksum, Amazon S3 ignores any provided
      *             <code>ChecksumAlgorithm</code> parameter.</p>
+     * @public
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
-     * @public
      * <p>Allows grantee the read, write, read ACP, and write ACP permissions on the
      *          bucket.</p>
      *          <p>This functionality is not supported for Amazon S3 on Outposts.</p>
+     * @public
      */
     GrantFullControl?: string;
     /**
-     * @public
      * <p>Allows grantee to list the objects in the bucket.</p>
      *          <p>This functionality is not supported for Amazon S3 on Outposts.</p>
+     * @public
      */
     GrantRead?: string;
     /**
-     * @public
      * <p>Allows grantee to read the bucket ACL.</p>
      *          <p>This functionality is not supported for Amazon S3 on Outposts.</p>
+     * @public
      */
     GrantReadACP?: string;
     /**
-     * @public
      * <p>Allows grantee to create new objects in the bucket.</p>
      *          <p>For the bucket and object owners of existing objects, also allows deletions and
      *          overwrites of those objects.</p>
+     * @public
      */
     GrantWrite?: string;
     /**
-     * @public
      * <p>Allows grantee to write the ACL for the applicable bucket.</p>
      *          <p>This functionality is not supported for Amazon S3 on Outposts.</p>
+     * @public
      */
     GrantWriteACP?: string;
     /**
-     * @public
      * <p>Key for which the PUT action was initiated.</p>
+     * @public
      */
     Key: string | undefined;
     /**
-     * @public
      * <p>Confirms that the requester knows that they will be charged for the request. Bucket
      *          owners need not specify this parameter in their requests. If either the source or
      *          destination S3 bucket has Requester Pays enabled, the requester will pay for
@@ -1000,19 +999,20 @@ export interface PutObjectAclRequest {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestPayer?: RequestPayer;
     /**
-     * @public
      * <p>Version ID used to reference a specific version of the object.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     VersionId?: string;
     /**
-     * @public
      * <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedBucketOwner?: string;
 }
@@ -1021,12 +1021,12 @@ export interface PutObjectAclRequest {
  */
 export interface PutObjectLegalHoldOutput {
     /**
-     * @public
      * <p>If present, indicates that the requester was successfully charged for the
      *          request.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestCharged?: RequestCharged;
 }
@@ -1035,27 +1035,26 @@ export interface PutObjectLegalHoldOutput {
  */
 export interface PutObjectLegalHoldRequest {
     /**
-     * @public
      * <p>The bucket name containing the object that you want to place a legal hold on. </p>
      *          <p>
      *             <b>Access points</b> - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form <i>AccessPointName</i>-<i>AccountId</i>.s3-accesspoint.<i>Region</i>.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-access-points.html">Using access points</a> in the <i>Amazon S3 User Guide</i>.</p>
      * <p>Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies.
      * For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues</p>
+     * @public
      */
     Bucket: string | undefined;
     /**
-     * @public
      * <p>The key name for the object that you want to place a legal hold on.</p>
+     * @public
      */
     Key: string | undefined;
     /**
-     * @public
      * <p>Container element for the legal hold configuration you want to apply to the specified
      *          object.</p>
+     * @public
      */
     LegalHold?: ObjectLockLegalHold;
     /**
-     * @public
      * <p>Confirms that the requester knows that they will be charged for the request. Bucket
      *          owners need not specify this parameter in their requests. If either the source or
      *          destination S3 bucket has Requester Pays enabled, the requester will pay for
@@ -1065,21 +1064,21 @@ export interface PutObjectLegalHoldRequest {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestPayer?: RequestPayer;
     /**
-     * @public
      * <p>The version ID of the object that you want to place a legal hold on.</p>
+     * @public
      */
     VersionId?: string;
     /**
-     * @public
      * <p>The MD5 hash for the request body.</p>
      *          <p>For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.</p>
+     * @public
      */
     ContentMD5?: string;
     /**
-     * @public
      * <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any
      *     additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or
      *     <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more
@@ -1087,11 +1086,12 @@ export interface PutObjectLegalHoldRequest {
      *     the <i>Amazon S3 User Guide</i>.</p>
      *          <p>If you provide an individual checksum, Amazon S3 ignores any provided
      *             <code>ChecksumAlgorithm</code> parameter.</p>
+     * @public
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
-     * @public
      * <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedBucketOwner?: string;
 }
@@ -1100,12 +1100,12 @@ export interface PutObjectLegalHoldRequest {
  */
 export interface PutObjectLockConfigurationOutput {
     /**
-     * @public
      * <p>If present, indicates that the requester was successfully charged for the
      *          request.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestCharged?: RequestCharged;
 }
@@ -1114,19 +1114,18 @@ export interface PutObjectLockConfigurationOutput {
  */
 export interface PutObjectLockConfigurationRequest {
     /**
-     * @public
      * <p>The bucket whose Object Lock configuration you want to create or replace.</p>
      * <p>Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies.
      * For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues</p>
+     * @public
      */
     Bucket: string | undefined;
     /**
-     * @public
      * <p>The Object Lock configuration that you want to apply to the specified bucket.</p>
+     * @public
      */
     ObjectLockConfiguration?: ObjectLockConfiguration;
     /**
-     * @public
      * <p>Confirms that the requester knows that they will be charged for the request. Bucket
      *          owners need not specify this parameter in their requests. If either the source or
      *          destination S3 bucket has Requester Pays enabled, the requester will pay for
@@ -1136,21 +1135,21 @@ export interface PutObjectLockConfigurationRequest {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestPayer?: RequestPayer;
     /**
-     * @public
      * <p>A token to allow Object Lock to be enabled for an existing bucket.</p>
+     * @public
      */
     Token?: string;
     /**
-     * @public
      * <p>The MD5 hash for the request body.</p>
      *          <p>For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.</p>
+     * @public
      */
     ContentMD5?: string;
     /**
-     * @public
      * <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any
      *     additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or
      *     <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more
@@ -1158,11 +1157,12 @@ export interface PutObjectLockConfigurationRequest {
      *     the <i>Amazon S3 User Guide</i>.</p>
      *          <p>If you provide an individual checksum, Amazon S3 ignores any provided
      *             <code>ChecksumAlgorithm</code> parameter.</p>
+     * @public
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
-     * @public
      * <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedBucketOwner?: string;
 }
@@ -1171,12 +1171,12 @@ export interface PutObjectLockConfigurationRequest {
  */
 export interface PutObjectRetentionOutput {
     /**
-     * @public
      * <p>If present, indicates that the requester was successfully charged for the
      *          request.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestCharged?: RequestCharged;
 }
@@ -1185,28 +1185,27 @@ export interface PutObjectRetentionOutput {
  */
 export interface PutObjectRetentionRequest {
     /**
-     * @public
      * <p>The bucket name that contains the object you want to apply this Object Retention
      *          configuration to. </p>
      *          <p>
      *             <b>Access points</b> - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form <i>AccessPointName</i>-<i>AccountId</i>.s3-accesspoint.<i>Region</i>.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-access-points.html">Using access points</a> in the <i>Amazon S3 User Guide</i>.</p>
      * <p>Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies.
      * For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues</p>
+     * @public
      */
     Bucket: string | undefined;
     /**
-     * @public
      * <p>The key name for the object that you want to apply this Object Retention configuration
      *          to.</p>
+     * @public
      */
     Key: string | undefined;
     /**
-     * @public
      * <p>The container element for the Object Retention configuration.</p>
+     * @public
      */
     Retention?: ObjectLockRetention;
     /**
-     * @public
      * <p>Confirms that the requester knows that they will be charged for the request. Bucket
      *          owners need not specify this parameter in their requests. If either the source or
      *          destination S3 bucket has Requester Pays enabled, the requester will pay for
@@ -1216,27 +1215,27 @@ export interface PutObjectRetentionRequest {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestPayer?: RequestPayer;
     /**
-     * @public
      * <p>The version ID for the object that you want to apply this Object Retention configuration
      *          to.</p>
+     * @public
      */
     VersionId?: string;
     /**
-     * @public
      * <p>Indicates whether this action should bypass Governance-mode restrictions.</p>
+     * @public
      */
     BypassGovernanceRetention?: boolean;
     /**
-     * @public
      * <p>The MD5 hash for the request body.</p>
      *          <p>For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.</p>
+     * @public
      */
     ContentMD5?: string;
     /**
-     * @public
      * <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any
      *     additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or
      *     <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more
@@ -1244,11 +1243,12 @@ export interface PutObjectRetentionRequest {
      *     the <i>Amazon S3 User Guide</i>.</p>
      *          <p>If you provide an individual checksum, Amazon S3 ignores any provided
      *             <code>ChecksumAlgorithm</code> parameter.</p>
+     * @public
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
-     * @public
      * <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedBucketOwner?: string;
 }
@@ -1257,8 +1257,8 @@ export interface PutObjectRetentionRequest {
  */
 export interface PutObjectTaggingOutput {
     /**
-     * @public
      * <p>The versionId of the object the tag-set was added to.</p>
+     * @public
      */
     VersionId?: string;
 }
@@ -1267,7 +1267,6 @@ export interface PutObjectTaggingOutput {
  */
 export interface PutObjectTaggingRequest {
     /**
-     * @public
      * <p>The bucket name containing the object. </p>
      *          <p>
      *             <b>Access points</b> - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form <i>AccessPointName</i>-<i>AccountId</i>.s3-accesspoint.<i>Region</i>.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-access-points.html">Using access points</a> in the <i>Amazon S3 User Guide</i>.</p>
@@ -1276,26 +1275,26 @@ export interface PutObjectTaggingRequest {
      *                <i>AccessPointName</i>-<i>AccountId</i>.<i>outpostID</i>.s3-outposts.<i>Region</i>.amazonaws.com</code>. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/S3onOutposts.html">What is S3 on Outposts?</a> in the <i>Amazon S3 User Guide</i>.</p>
      * <p>Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies.
      * For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues</p>
+     * @public
      */
     Bucket: string | undefined;
     /**
-     * @public
      * <p>Name of the object key.</p>
+     * @public
      */
     Key: string | undefined;
     /**
-     * @public
      * <p>The versionId of the object that the tag-set will be added to.</p>
+     * @public
      */
     VersionId?: string;
     /**
-     * @public
      * <p>The MD5 hash for the request body.</p>
      *          <p>For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.</p>
+     * @public
      */
     ContentMD5?: string;
     /**
-     * @public
      * <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any
      *     additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or
      *     <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more
@@ -1303,20 +1302,20 @@ export interface PutObjectTaggingRequest {
      *     the <i>Amazon S3 User Guide</i>.</p>
      *          <p>If you provide an individual checksum, Amazon S3 ignores any provided
      *             <code>ChecksumAlgorithm</code> parameter.</p>
+     * @public
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
-     * @public
      * <p>Container for the <code>TagSet</code> and <code>Tag</code> elements</p>
+     * @public
      */
     Tagging: Tagging | undefined;
     /**
-     * @public
      * <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedBucketOwner?: string;
     /**
-     * @public
      * <p>Confirms that the requester knows that they will be charged for the request. Bucket
      *          owners need not specify this parameter in their requests. If either the source or
      *          destination S3 bucket has Requester Pays enabled, the requester will pay for
@@ -1326,6 +1325,7 @@ export interface PutObjectTaggingRequest {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestPayer?: RequestPayer;
 }
@@ -1334,21 +1334,20 @@ export interface PutObjectTaggingRequest {
  */
 export interface PutPublicAccessBlockRequest {
     /**
-     * @public
      * <p>The name of the Amazon S3 bucket whose <code>PublicAccessBlock</code> configuration you want
      *          to set.</p>
      * <p>Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies.
      * For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues</p>
+     * @public
      */
     Bucket: string | undefined;
     /**
-     * @public
      * <p>The MD5 hash of the <code>PutPublicAccessBlock</code> request body. </p>
      *          <p>For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.</p>
+     * @public
      */
     ContentMD5?: string;
     /**
-     * @public
      * <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any
      *     additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or
      *     <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more
@@ -1356,24 +1355,25 @@ export interface PutPublicAccessBlockRequest {
      *     the <i>Amazon S3 User Guide</i>.</p>
      *          <p>If you provide an individual checksum, Amazon S3 ignores any provided
      *             <code>ChecksumAlgorithm</code> parameter.</p>
+     * @public
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
-     * @public
      * <p>The <code>PublicAccessBlock</code> configuration that you want to apply to this Amazon S3
      *          bucket. You can enable the configuration options in any combination. For more information
      *          about when Amazon S3 considers a bucket or object public, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/access-control-block-public-access.html#access-control-block-public-access-policy-status">The Meaning of "Public"</a> in the <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     PublicAccessBlockConfiguration: PublicAccessBlockConfiguration | undefined;
     /**
-     * @public
      * <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedBucketOwner?: string;
 }
 /**
- * @public
  * <p>This action is not allowed against this storage tier.</p>
+ * @public
  */
 export declare class ObjectAlreadyInActiveTierError extends __BaseException {
     readonly name: "ObjectAlreadyInActiveTierError";
@@ -1388,18 +1388,18 @@ export declare class ObjectAlreadyInActiveTierError extends __BaseException {
  */
 export interface RestoreObjectOutput {
     /**
-     * @public
      * <p>If present, indicates that the requester was successfully charged for the
      *          request.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestCharged?: RequestCharged;
     /**
-     * @public
      * <p>Indicates the path in the provided S3 output location where Select results will be
      *          restored to.</p>
+     * @public
      */
     RestoreOutputPath?: string;
 }
@@ -1417,112 +1417,112 @@ export declare const Tier: {
  */
 export type Tier = (typeof Tier)[keyof typeof Tier];
 /**
- * @public
  * <p>Container for S3 Glacier job parameters.</p>
+ * @public
  */
 export interface GlacierJobParameters {
     /**
-     * @public
      * <p>Retrieval tier at which the restore will be processed.</p>
+     * @public
      */
     Tier: Tier | undefined;
 }
 /**
- * @public
  * <p>Contains the type of server-side encryption used.</p>
+ * @public
  */
 export interface Encryption {
     /**
-     * @public
      * <p>The server-side encryption algorithm used when storing job results in Amazon S3 (for example,
      *          AES256, <code>aws:kms</code>).</p>
+     * @public
      */
     EncryptionType: ServerSideEncryption | undefined;
     /**
-     * @public
      * <p>If the encryption type is <code>aws:kms</code>, this optional value specifies the ID of
      *          the symmetric encryption customer managed key to use for encryption of job results. Amazon S3 only
      *          supports symmetric encryption KMS keys. For more information, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/symmetric-asymmetric.html">Asymmetric keys in KMS</a> in the <i>Amazon Web Services Key Management Service
      *             Developer Guide</i>.</p>
+     * @public
      */
     KMSKeyId?: string;
     /**
-     * @public
      * <p>If the encryption type is <code>aws:kms</code>, this optional value can be used to
      *          specify the encryption context for the restore results.</p>
+     * @public
      */
     KMSContext?: string;
 }
 /**
- * @public
  * <p>A metadata key-value pair to store with an object.</p>
+ * @public
  */
 export interface MetadataEntry {
     /**
-     * @public
      * <p>Name of the object.</p>
+     * @public
      */
     Name?: string;
     /**
-     * @public
      * <p>Value of the object.</p>
+     * @public
      */
     Value?: string;
 }
 /**
- * @public
  * <p>Describes an Amazon S3 location that will receive the results of the restore request.</p>
+ * @public
  */
 export interface S3Location {
     /**
-     * @public
      * <p>The name of the bucket where the restore results will be placed.</p>
+     * @public
      */
     BucketName: string | undefined;
     /**
-     * @public
      * <p>The prefix that is prepended to the restore results for this request.</p>
+     * @public
      */
     Prefix: string | undefined;
     /**
-     * @public
      * <p>Contains the type of server-side encryption used.</p>
+     * @public
      */
     Encryption?: Encryption;
     /**
-     * @public
      * <p>The canned ACL to apply to the restore results.</p>
+     * @public
      */
     CannedACL?: ObjectCannedACL;
     /**
-     * @public
      * <p>A list of grants that control access to the staged results.</p>
+     * @public
      */
     AccessControlList?: Grant[];
     /**
-     * @public
      * <p>The tag-set that is applied to the restore results.</p>
+     * @public
      */
     Tagging?: Tagging;
     /**
-     * @public
      * <p>A list of metadata to store with the restore results in S3.</p>
+     * @public
      */
     UserMetadata?: MetadataEntry[];
     /**
-     * @public
      * <p>The class of storage used to store the restore results.</p>
+     * @public
      */
     StorageClass?: StorageClass;
 }
 /**
- * @public
  * <p>Describes the location where the restore job's output is stored.</p>
+ * @public
  */
 export interface OutputLocation {
     /**
-     * @public
      * <p>Describes an S3 location that will receive the results of the restore request.</p>
+     * @public
      */
     S3?: S3Location;
 }
@@ -1564,13 +1564,12 @@ export declare const FileHeaderInfo: {
  */
 export type FileHeaderInfo = (typeof FileHeaderInfo)[keyof typeof FileHeaderInfo];
 /**
- * @public
  * <p>Describes how an uncompressed comma-separated values (CSV)-formatted input object is
  *          formatted.</p>
+ * @public
  */
 export interface CSVInput {
     /**
-     * @public
      * <p>Describes the first line of input. Valid values are:</p>
      *          <ul>
      *             <li>
@@ -1589,38 +1588,38 @@ export interface CSVInput {
      *                identify a column in an expression (<code>SELECT "name" FROM OBJECT</code>). </p>
      *             </li>
      *          </ul>
+     * @public
      */
     FileHeaderInfo?: FileHeaderInfo;
     /**
-     * @public
      * <p>A single character used to indicate that a row should be ignored when the character is
      *          present at the start of that row. You can specify any character to indicate a comment line.
      *          The default character is <code>#</code>.</p>
      *          <p>Default: <code>#</code>
      *          </p>
+     * @public
      */
     Comments?: string;
     /**
-     * @public
      * <p>A single character used for escaping the quotation mark character inside an already
      *          escaped value. For example, the value <code>""" a , b """</code> is parsed as <code>" a , b
      *             "</code>.</p>
+     * @public
      */
     QuoteEscapeCharacter?: string;
     /**
-     * @public
      * <p>A single character used to separate individual records in the input. Instead of the
      *          default value, you can specify an arbitrary delimiter.</p>
+     * @public
      */
     RecordDelimiter?: string;
     /**
-     * @public
      * <p>A single character used to separate individual fields in a record. You can specify an
      *          arbitrary delimiter.</p>
+     * @public
      */
     FieldDelimiter?: string;
     /**
-     * @public
      * <p>A single character used for escaping when the field delimiter is part of the value. For
      *          example, if the value is <code>a, b</code>, Amazon S3 wraps this field value in quotation marks,
      *          as follows: <code>" a , b "</code>.</p>
@@ -1629,13 +1628,14 @@ export interface CSVInput {
      *          </p>
      *          <p>Ancestors: <code>CSV</code>
      *          </p>
+     * @public
      */
     QuoteCharacter?: string;
     /**
-     * @public
      * <p>Specifies that CSV field values may contain quoted record delimiters and such records
      *          should be allowed. Default value is FALSE. Setting this value to TRUE may lower
      *          performance.</p>
+     * @public
      */
     AllowQuotedRecordDelimiter?: boolean;
 }
@@ -1652,46 +1652,46 @@ export declare const JSONType: {
  */
 export type JSONType = (typeof JSONType)[keyof typeof JSONType];
 /**
- * @public
  * <p>Specifies JSON as object's input serialization format.</p>
+ * @public
  */
 export interface JSONInput {
     /**
-     * @public
      * <p>The type of JSON. Valid values: Document, Lines.</p>
+     * @public
      */
     Type?: JSONType;
 }
 /**
- * @public
  * <p>Container for Parquet.</p>
+ * @public
  */
 export interface ParquetInput {
 }
 /**
- * @public
  * <p>Describes the serialization format of the object.</p>
+ * @public
  */
 export interface InputSerialization {
     /**
-     * @public
      * <p>Describes the serialization of a CSV-encoded object.</p>
+     * @public
      */
     CSV?: CSVInput;
     /**
-     * @public
      * <p>Specifies object's compression format. Valid values: NONE, GZIP, BZIP2. Default Value:
      *          NONE.</p>
+     * @public
      */
     CompressionType?: CompressionType;
     /**
-     * @public
      * <p>Specifies JSON as object's input serialization format.</p>
+     * @public
      */
     JSON?: JSONInput;
     /**
-     * @public
      * <p>Specifies Parquet as object's input serialization format.</p>
+     * @public
      */
     Parquet?: ParquetInput;
 }
@@ -1708,13 +1708,12 @@ export declare const QuoteFields: {
  */
 export type QuoteFields = (typeof QuoteFields)[keyof typeof QuoteFields];
 /**
- * @public
  * <p>Describes how uncompressed comma-separated values (CSV)-formatted results are
  *          formatted.</p>
+ * @public
  */
 export interface CSVOutput {
     /**
-     * @public
      * <p>Indicates whether to use quotation marks around output fields. </p>
      *          <ul>
      *             <li>
@@ -1726,85 +1725,86 @@ export interface CSVOutput {
      *                   <code>ASNEEDED</code>: Use quotation marks for output fields when needed.</p>
      *             </li>
      *          </ul>
+     * @public
      */
     QuoteFields?: QuoteFields;
     /**
-     * @public
      * <p>The single character used for escaping the quote character inside an already escaped
      *          value.</p>
+     * @public
      */
     QuoteEscapeCharacter?: string;
     /**
-     * @public
      * <p>A single character used to separate individual records in the output. Instead of the
      *          default value, you can specify an arbitrary delimiter.</p>
+     * @public
      */
     RecordDelimiter?: string;
     /**
-     * @public
      * <p>The value used to separate individual fields in a record. You can specify an arbitrary
      *          delimiter.</p>
+     * @public
      */
     FieldDelimiter?: string;
     /**
-     * @public
      * <p>A single character used for escaping when the field delimiter is part of the value. For
      *          example, if the value is <code>a, b</code>, Amazon S3 wraps this field value in quotation marks,
      *          as follows: <code>" a , b "</code>.</p>
+     * @public
      */
     QuoteCharacter?: string;
 }
 /**
- * @public
  * <p>Specifies JSON as request's output serialization format.</p>
+ * @public
  */
 export interface JSONOutput {
     /**
-     * @public
      * <p>The value used to separate individual records in the output. If no value is specified,
      *          Amazon S3 uses a newline character ('\n').</p>
+     * @public
      */
     RecordDelimiter?: string;
 }
 /**
- * @public
  * <p>Describes how results of the Select job are serialized.</p>
+ * @public
  */
 export interface OutputSerialization {
     /**
-     * @public
      * <p>Describes the serialization of CSV-encoded Select results.</p>
+     * @public
      */
     CSV?: CSVOutput;
     /**
-     * @public
      * <p>Specifies JSON as request's output serialization format.</p>
+     * @public
      */
     JSON?: JSONOutput;
 }
 /**
- * @public
  * <p>Describes the parameters for Select job types.</p>
+ * @public
  */
 export interface SelectParameters {
     /**
-     * @public
      * <p>Describes the serialization format of the object.</p>
+     * @public
      */
     InputSerialization: InputSerialization | undefined;
     /**
-     * @public
      * <p>The type of the provided expression (for example, SQL).</p>
+     * @public
      */
     ExpressionType: ExpressionType | undefined;
     /**
-     * @public
      * <p>The expression that is used to query the object.</p>
+     * @public
      */
     Expression: string | undefined;
     /**
-     * @public
      * <p>Describes how the results of the Select job are serialized.</p>
+     * @public
      */
     OutputSerialization: OutputSerialization | undefined;
 }
@@ -1820,47 +1820,47 @@ export declare const RestoreRequestType: {
  */
 export type RestoreRequestType = (typeof RestoreRequestType)[keyof typeof RestoreRequestType];
 /**
- * @public
  * <p>Container for restore job parameters.</p>
+ * @public
  */
 export interface RestoreRequest {
     /**
-     * @public
      * <p>Lifetime of the active copy in days. Do not use with restores that specify
      *             <code>OutputLocation</code>.</p>
      *          <p>The Days element is required for regular restores, and must not be provided for select
      *          requests.</p>
+     * @public
      */
     Days?: number;
     /**
-     * @public
      * <p>S3 Glacier related parameters pertaining to this job. Do not use with restores that
      *          specify <code>OutputLocation</code>.</p>
+     * @public
      */
     GlacierJobParameters?: GlacierJobParameters;
     /**
-     * @public
      * <p>Type of restore request.</p>
+     * @public
      */
     Type?: RestoreRequestType;
     /**
-     * @public
      * <p>Retrieval tier at which the restore will be processed.</p>
+     * @public
      */
     Tier?: Tier;
     /**
-     * @public
      * <p>The optional description for the job.</p>
+     * @public
      */
     Description?: string;
     /**
-     * @public
      * <p>Describes the parameters for Select job types.</p>
+     * @public
      */
     SelectParameters?: SelectParameters;
     /**
-     * @public
      * <p>Describes the location where the restore job's output is stored.</p>
+     * @public
      */
     OutputLocation?: OutputLocation;
 }
@@ -1869,7 +1869,6 @@ export interface RestoreRequest {
  */
 export interface RestoreObjectRequest {
     /**
-     * @public
      * <p>The bucket name containing the object to restore. </p>
      *          <p>
      *             <b>Access points</b> - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form <i>AccessPointName</i>-<i>AccountId</i>.s3-accesspoint.<i>Region</i>.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-access-points.html">Using access points</a> in the <i>Amazon S3 User Guide</i>.</p>
@@ -1878,25 +1877,25 @@ export interface RestoreObjectRequest {
      *                <i>AccessPointName</i>-<i>AccountId</i>.<i>outpostID</i>.s3-outposts.<i>Region</i>.amazonaws.com</code>. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/S3onOutposts.html">What is S3 on Outposts?</a> in the <i>Amazon S3 User Guide</i>.</p>
      * <p>Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies.
      * For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues</p>
+     * @public
      */
     Bucket: string | undefined;
     /**
-     * @public
      * <p>Object key for which the action was initiated.</p>
+     * @public
      */
     Key: string | undefined;
     /**
-     * @public
      * <p>VersionId used to reference a specific version of the object.</p>
+     * @public
      */
     VersionId?: string;
     /**
-     * @public
      * <p>Container for restore job parameters.</p>
+     * @public
      */
     RestoreRequest?: RestoreRequest;
     /**
-     * @public
      * <p>Confirms that the requester knows that they will be charged for the request. Bucket
      *          owners need not specify this parameter in their requests. If either the source or
      *          destination S3 bucket has Requester Pays enabled, the requester will pay for
@@ -1906,10 +1905,10 @@ export interface RestoreObjectRequest {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestPayer?: RequestPayer;
     /**
-     * @public
      * <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any
      *     additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or
      *     <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more
@@ -1917,106 +1916,107 @@ export interface RestoreObjectRequest {
      *     the <i>Amazon S3 User Guide</i>.</p>
      *          <p>If you provide an individual checksum, Amazon S3 ignores any provided
      *             <code>ChecksumAlgorithm</code> parameter.</p>
+     * @public
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
-     * @public
      * <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedBucketOwner?: string;
 }
 /**
- * @public
  * <p></p>
+ * @public
  */
 export interface ContinuationEvent {
 }
 /**
- * @public
  * <p>A message that indicates the request is complete and no more messages will be sent. You
  *          should not assume that the request is complete until the client receives an
  *             <code>EndEvent</code>.</p>
+ * @public
  */
 export interface EndEvent {
 }
 /**
- * @public
  * <p>This data type contains information about progress of an operation.</p>
+ * @public
  */
 export interface Progress {
     /**
-     * @public
      * <p>The current number of object bytes scanned.</p>
+     * @public
      */
     BytesScanned?: number;
     /**
-     * @public
      * <p>The current number of uncompressed object bytes processed.</p>
+     * @public
      */
     BytesProcessed?: number;
     /**
-     * @public
      * <p>The current number of bytes of records payload data returned.</p>
+     * @public
      */
     BytesReturned?: number;
 }
 /**
- * @public
  * <p>This data type contains information about the progress event of an operation.</p>
+ * @public
  */
 export interface ProgressEvent {
     /**
-     * @public
      * <p>The Progress event details.</p>
+     * @public
      */
     Details?: Progress;
 }
 /**
- * @public
  * <p>The container for the records event.</p>
+ * @public
  */
 export interface RecordsEvent {
     /**
-     * @public
      * <p>The byte array of partial, one or more result records.</p>
+     * @public
      */
     Payload?: Uint8Array;
 }
 /**
- * @public
  * <p>Container for the stats details.</p>
+ * @public
  */
 export interface Stats {
     /**
-     * @public
      * <p>The total number of object bytes scanned.</p>
+     * @public
      */
     BytesScanned?: number;
     /**
-     * @public
      * <p>The total number of uncompressed object bytes processed.</p>
+     * @public
      */
     BytesProcessed?: number;
     /**
-     * @public
      * <p>The total number of bytes of records payload data returned.</p>
+     * @public
      */
     BytesReturned?: number;
 }
 /**
- * @public
  * <p>Container for the Stats Event.</p>
+ * @public
  */
 export interface StatsEvent {
     /**
-     * @public
      * <p>The Stats event details.</p>
+     * @public
      */
     Details?: Stats;
 }
 /**
- * @public
  * <p>The container for selecting objects from a content event stream.</p>
+ * @public
  */
 export type SelectObjectContentEventStream = SelectObjectContentEventStream.ContMember | SelectObjectContentEventStream.EndMember | SelectObjectContentEventStream.ProgressMember | SelectObjectContentEventStream.RecordsMember | SelectObjectContentEventStream.StatsMember | SelectObjectContentEventStream.$UnknownMember;
 /**
@@ -2024,8 +2024,8 @@ export type SelectObjectContentEventStream = SelectObjectContentEventStream.Cont
  */
 export declare namespace SelectObjectContentEventStream {
     /**
-     * @public
      * <p>The Records Event.</p>
+     * @public
      */
     interface RecordsMember {
         Records: RecordsEvent;
@@ -2036,8 +2036,8 @@ export declare namespace SelectObjectContentEventStream {
         $unknown?: never;
     }
     /**
-     * @public
      * <p>The Stats Event.</p>
+     * @public
      */
     interface StatsMember {
         Records?: never;
@@ -2048,8 +2048,8 @@ export declare namespace SelectObjectContentEventStream {
         $unknown?: never;
     }
     /**
-     * @public
      * <p>The Progress Event.</p>
+     * @public
      */
     interface ProgressMember {
         Records?: never;
@@ -2060,8 +2060,8 @@ export declare namespace SelectObjectContentEventStream {
         $unknown?: never;
     }
     /**
-     * @public
      * <p>The Continuation Event.</p>
+     * @public
      */
     interface ContMember {
         Records?: never;
@@ -2072,8 +2072,8 @@ export declare namespace SelectObjectContentEventStream {
         $unknown?: never;
     }
     /**
-     * @public
      * <p>The End Event.</p>
+     * @public
      */
     interface EndMember {
         Records?: never;
@@ -2109,125 +2109,124 @@ export declare namespace SelectObjectContentEventStream {
  */
 export interface SelectObjectContentOutput {
     /**
-     * @public
      * <p>The array of results.</p>
+     * @public
      */
     Payload?: AsyncIterable<SelectObjectContentEventStream>;
 }
 /**
- * @public
  * <p>Container for specifying if periodic <code>QueryProgress</code> messages should be
  *          sent.</p>
+ * @public
  */
 export interface RequestProgress {
     /**
-     * @public
      * <p>Specifies whether periodic QueryProgress frames should be sent. Valid values: TRUE,
      *          FALSE. Default value: FALSE.</p>
+     * @public
      */
     Enabled?: boolean;
 }
 /**
- * @public
  * <p>Specifies the byte range of the object to get the records from. A record is processed
  *          when its first byte is contained by the range. This parameter is optional, but when
  *          specified, it must not be empty. See RFC 2616, Section 14.35.1 about how to specify the
  *          start and end of the range.</p>
+ * @public
  */
 export interface ScanRange {
     /**
-     * @public
      * <p>Specifies the start of the byte range. This parameter is optional. Valid values:
      *          non-negative integers. The default value is 0. If only <code>start</code> is supplied, it
      *          means scan from that point to the end of the file. For example,
      *             <code><scanrange><start>50</start></scanrange></code> means scan
      *          from byte 50 until the end of the file.</p>
+     * @public
      */
     Start?: number;
     /**
-     * @public
      * <p>Specifies the end of the byte range. This parameter is optional. Valid values:
      *          non-negative integers. The default value is one less than the size of the object being
      *          queried. If only the End parameter is supplied, it is interpreted to mean scan the last N
      *          bytes of the file. For example,
      *             <code><scanrange><end>50</end></scanrange></code> means scan the
      *          last 50 bytes.</p>
+     * @public
      */
     End?: number;
 }
 /**
- * @public
  * <p>Request to filter the contents of an Amazon S3 object based on a simple Structured Query
  *          Language (SQL) statement. In the request, along with the SQL expression, you must specify a
  *          data serialization format (JSON or CSV) of the object. Amazon S3 uses this to parse object data
  *          into records. It returns only records that match the specified SQL expression. You must
  *          also specify the data serialization format for the response. For more information, see
  *             <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/RESTObjectSELECTContent.html">S3Select API Documentation</a>.</p>
+ * @public
  */
 export interface SelectObjectContentRequest {
     /**
-     * @public
      * <p>The S3 bucket.</p>
      * <p>Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies.
      * For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues</p>
+     * @public
      */
     Bucket: string | undefined;
     /**
-     * @public
      * <p>The object key.</p>
+     * @public
      */
     Key: string | undefined;
     /**
-     * @public
      * <p>The server-side encryption (SSE) algorithm used to encrypt the object. This parameter is needed only when the object was created
      *     using a checksum algorithm. For more information,
      *     see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html">Protecting data using SSE-C keys</a> in the
      *     <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     SSECustomerAlgorithm?: string;
     /**
-     * @public
      * <p>The server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm.
      *     For more information, see
      *     <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html">Protecting data using SSE-C keys</a> in the
      *     <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     SSECustomerKey?: string;
     /**
-     * @public
      * <p>The MD5 server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum
      *     algorithm. For more information,
      *     see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html">Protecting data using SSE-C keys</a> in the
      *     <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     SSECustomerKeyMD5?: string;
     /**
-     * @public
      * <p>The expression that is used to query the object.</p>
+     * @public
      */
     Expression: string | undefined;
     /**
-     * @public
      * <p>The type of the provided expression (for example, SQL).</p>
+     * @public
      */
     ExpressionType: ExpressionType | undefined;
     /**
-     * @public
      * <p>Specifies if periodic request progress information should be enabled.</p>
+     * @public
      */
     RequestProgress?: RequestProgress;
     /**
-     * @public
      * <p>Describes the format of the data in the object that is being queried.</p>
+     * @public
      */
     InputSerialization: InputSerialization | undefined;
     /**
-     * @public
      * <p>Describes the format of the data that you want Amazon S3 to return in response.</p>
+     * @public
      */
     OutputSerialization: OutputSerialization | undefined;
     /**
-     * @public
      * <p>Specifies the byte range of the object to get the records from. A record is processed
      *          when its first byte is contained by the range. This parameter is optional, but when
      *          specified, it must not be empty. See RFC 2616, Section 14.35.1 about how to specify the
@@ -2252,11 +2251,12 @@ export interface SelectObjectContentRequest {
      *                process only the records within the last 50 bytes of the file.</p>
      *             </li>
      *          </ul>
+     * @public
      */
     ScanRange?: ScanRange;
     /**
-     * @public
      * <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedBucketOwner?: string;
 }
@@ -2265,95 +2265,95 @@ export interface SelectObjectContentRequest {
  */
 export interface UploadPartOutput {
     /**
-     * @public
      * <p>The server-side encryption algorithm used when you store this object in Amazon S3 (for example,
      *             <code>AES256</code>, <code>aws:kms</code>).</p>
      *          <note>
      *             <p>For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (<code>AES256</code>) is supported.</p>
      *          </note>
+     * @public
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
-     * @public
      * <p>Entity tag for the uploaded object.</p>
+     * @public
      */
     ETag?: string;
     /**
-     * @public
      * <p>The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded
      *     with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated
      *     with multipart uploads, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html#large-object-checksums">
      *     Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumCRC32?: string;
     /**
-     * @public
      * <p>The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded
      *     with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated
      *     with multipart uploads, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html#large-object-checksums">
      *     Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumCRC32C?: string;
     /**
-     * @public
      * <p>The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded
      *     with the object. When you use the API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated
      *     with multipart uploads, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html#large-object-checksums">
      *     Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumSHA1?: string;
     /**
-     * @public
      * <p>The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded
      *     with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated
      *     with multipart uploads, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html#large-object-checksums">
      *     Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumSHA256?: string;
     /**
-     * @public
      * <p>If server-side encryption with a customer-provided encryption key was requested, the
      *          response will include this header to confirm the encryption algorithm that's used.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSECustomerAlgorithm?: string;
     /**
-     * @public
      * <p>If server-side encryption with a customer-provided encryption key was requested, the
      *          response will include this header to provide the round-trip message integrity verification of
      *          the customer-provided encryption key.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSECustomerKeyMD5?: string;
     /**
-     * @public
      * <p>If present, indicates the ID of the Key Management Service (KMS) symmetric encryption customer managed key
      *          that was used for the object.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSEKMSKeyId?: string;
     /**
-     * @public
      * <p>Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption
      *          with Key Management Service (KMS) keys (SSE-KMS).</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     BucketKeyEnabled?: boolean;
     /**
-     * @public
      * <p>If present, indicates that the requester was successfully charged for the
      *          request.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestCharged?: RequestCharged;
 }
@@ -2362,18 +2362,17 @@ export interface UploadPartOutput {
  */
 export interface UploadPartRequest {
     /**
-     * @public
      * <p>Object data.</p>
+     * @public
      */
     Body?: StreamingBlobTypes;
     /**
-     * @public
      * <p>The name of the bucket to which the multipart upload was initiated.</p>
      *          <p>
      *             <b>Directory buckets</b> - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format <code>
      *                <i>Bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com</code>. Path-style requests are not supported.  Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format <code>
      *                <i>bucket_base_name</i>--<i>az-id</i>--x-s3</code> (for example, <code>
-     *                <i>DOC-EXAMPLE-BUCKET</i>--<i>usw2-az2</i>--x-s3</code>). For information about bucket naming
+     *                <i>DOC-EXAMPLE-BUCKET</i>--<i>usw2-az1</i>--x-s3</code>). For information about bucket naming
      *          restrictions, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/directory-bucket-naming-rules.html">Directory bucket naming
      *             rules</a> in the <i>Amazon S3 User Guide</i>.</p>
      *          <p>
@@ -2386,26 +2385,26 @@ export interface UploadPartRequest {
      *                <i>AccessPointName</i>-<i>AccountId</i>.<i>outpostID</i>.s3-outposts.<i>Region</i>.amazonaws.com</code>. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/S3onOutposts.html">What is S3 on Outposts?</a> in the <i>Amazon S3 User Guide</i>.</p>
      * <p>Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies.
      * For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues</p>
+     * @public
      */
     Bucket: string | undefined;
     /**
-     * @public
      * <p>Size of the body in bytes. This parameter is useful when the size of the body cannot be
      *          determined automatically.</p>
+     * @public
      */
     ContentLength?: number;
     /**
-     * @public
      * <p>The base64-encoded 128-bit MD5 digest of the part data. This parameter is auto-populated
      *          when using the command from the CLI. This parameter is required if object lock parameters
      *          are specified.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     ContentMD5?: string;
     /**
-     * @public
      * <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any
      *     additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or
      *     <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more
@@ -2415,67 +2414,67 @@ export interface UploadPartRequest {
      *             <code>ChecksumAlgorithm</code> parameter.</p>
      *          <p>This checksum algorithm must be the same for all parts and it match the checksum value
      *          supplied in the <code>CreateMultipartUpload</code> request.</p>
+     * @public
      */
     ChecksumAlgorithm?: ChecksumAlgorithm;
     /**
-     * @public
      * <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent.
      *     This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see
      *     <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the
      *     <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumCRC32?: string;
     /**
-     * @public
      * <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent.
      *     This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see
      *     <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the
      *     <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumCRC32C?: string;
     /**
-     * @public
      * <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent.
      *     This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see
      *     <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the
      *     <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumSHA1?: string;
     /**
-     * @public
      * <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent.
      *     This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see
      *     <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the
      *     <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumSHA256?: string;
     /**
-     * @public
      * <p>Object key for which the multipart upload was initiated.</p>
+     * @public
      */
     Key: string | undefined;
     /**
-     * @public
      * <p>Part number of part being uploaded. This is a positive integer between 1 and
      *          10,000.</p>
+     * @public
      */
     PartNumber: number | undefined;
     /**
-     * @public
      * <p>Upload ID identifying the multipart upload whose part is being uploaded.</p>
+     * @public
      */
     UploadId: string | undefined;
     /**
-     * @public
      * <p>Specifies the algorithm to use when encrypting the object (for example,
      *          AES256).</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSECustomerAlgorithm?: string;
     /**
-     * @public
      * <p>Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This
      *          value is used to store the object and then it is discarded; Amazon S3 does not store the
      *          encryption key. The key must be appropriate for use with the algorithm specified in the
@@ -2484,20 +2483,20 @@ export interface UploadPartRequest {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSECustomerKey?: string;
     /**
-     * @public
      * <p>Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses
      *          this header for a message integrity check to ensure that the encryption key was transmitted
      *          without error.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSECustomerKeyMD5?: string;
     /**
-     * @public
      * <p>Confirms that the requester knows that they will be charged for the request. Bucket
      *          owners need not specify this parameter in their requests. If either the source or
      *          destination S3 bucket has Requester Pays enabled, the requester will pay for
@@ -2507,59 +2506,60 @@ export interface UploadPartRequest {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestPayer?: RequestPayer;
     /**
-     * @public
      * <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedBucketOwner?: string;
 }
 /**
- * @public
  * <p>Container for all response elements.</p>
+ * @public
  */
 export interface CopyPartResult {
     /**
-     * @public
      * <p>Entity tag of the object.</p>
+     * @public
      */
     ETag?: string;
     /**
-     * @public
      * <p>Date and time at which the object was uploaded.</p>
+     * @public
      */
     LastModified?: Date;
     /**
-     * @public
      * <p>The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded
      *     with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated
      *     with multipart uploads, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html#large-object-checksums">
      *     Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumCRC32?: string;
     /**
-     * @public
      * <p>The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded
      *     with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated
      *     with multipart uploads, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html#large-object-checksums">
      *     Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumCRC32C?: string;
     /**
-     * @public
      * <p>The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded
      *     with the object. When you use the API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated
      *     with multipart uploads, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html#large-object-checksums">
      *     Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumSHA1?: string;
     /**
-     * @public
      * <p>The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded
      *     with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it's a calculation based on the checksum values of each individual part. For more information about how checksums are calculated
      *     with multipart uploads, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html#large-object-checksums">
      *     Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
+     * @public
      */
     ChecksumSHA256?: string;
 }
@@ -2568,72 +2568,72 @@ export interface CopyPartResult {
  */
 export interface UploadPartCopyOutput {
     /**
-     * @public
      * <p>The version of the source object that was copied, if you have enabled versioning on the
      *          source bucket.</p>
      *          <note>
      *             <p>This functionality is not supported when the source object is in a directory bucket.</p>
      *          </note>
+     * @public
      */
     CopySourceVersionId?: string;
     /**
-     * @public
      * <p>Container for all response elements.</p>
+     * @public
      */
     CopyPartResult?: CopyPartResult;
     /**
-     * @public
      * <p>The server-side encryption algorithm used when you store this object in Amazon S3 (for example,
      *             <code>AES256</code>, <code>aws:kms</code>).</p>
      *          <note>
      *             <p>For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (<code>AES256</code>) is supported.</p>
      *          </note>
+     * @public
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
-     * @public
      * <p>If server-side encryption with a customer-provided encryption key was requested, the
      *          response will include this header to confirm the encryption algorithm that's used.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSECustomerAlgorithm?: string;
     /**
-     * @public
      * <p>If server-side encryption with a customer-provided encryption key was requested, the
      *          response will include this header to provide the round-trip message integrity verification of
      *          the customer-provided encryption key.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSECustomerKeyMD5?: string;
     /**
-     * @public
      * <p>If present, indicates the ID of the Key Management Service (KMS) symmetric encryption customer managed key
      *          that was used for the object.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     SSEKMSKeyId?: string;
     /**
-     * @public
      * <p>Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption
      *          with Key Management Service (KMS) keys (SSE-KMS).</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     BucketKeyEnabled?: boolean;
     /**
-     * @public
      * <p>If present, indicates that the requester was successfully charged for the
      *          request.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestCharged?: RequestCharged;
 }
@@ -2642,13 +2642,12 @@ export interface UploadPartCopyOutput {
  */
 export interface UploadPartCopyRequest {
     /**
-     * @public
      * <p>The bucket name.</p>
      *          <p>
      *             <b>Directory buckets</b> - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format <code>
      *                <i>Bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com</code>. Path-style requests are not supported.  Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format <code>
      *                <i>bucket_base_name</i>--<i>az-id</i>--x-s3</code> (for example, <code>
-     *                <i>DOC-EXAMPLE-BUCKET</i>--<i>usw2-az2</i>--x-s3</code>). For information about bucket naming
+     *                <i>DOC-EXAMPLE-BUCKET</i>--<i>usw2-az1</i>--x-s3</code>). For information about bucket naming
      *          restrictions, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/directory-bucket-naming-rules.html">Directory bucket naming
      *             rules</a> in the <i>Amazon S3 User Guide</i>.</p>
      *          <p>
@@ -2661,10 +2660,10 @@ export interface UploadPartCopyRequest {
      *                <i>AccessPointName</i>-<i>AccountId</i>.<i>outpostID</i>.s3-outposts.<i>Region</i>.amazonaws.com</code>. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/S3onOutposts.html">What is S3 on Outposts?</a> in the <i>Amazon S3 User Guide</i>.</p>
      * <p>Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies.
      * For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues</p>
+     * @public
      */
     Bucket: string | undefined;
     /**
-     * @public
      * <p>Specifies the source object for the copy operation. You specify the value in one of two
      *          formats, depending on whether you want to access the source object through an <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/access-points.html">access point</a>:</p>
      *          <ul>
@@ -2707,10 +2706,10 @@ export interface UploadPartCopyRequest {
      *             <p>
      *                <b>Directory buckets</b> - S3 Versioning isn't enabled and supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     CopySource: string | undefined;
     /**
-     * @public
      * <p>Copies the object if its entity tag (ETag) matches the specified tag.</p>
      *          <p>If both of the
      *       <code>x-amz-copy-source-if-match</code> and
@@ -2724,10 +2723,10 @@ export interface UploadPartCopyRequest {
      *          <code>false</code>;</p>
      *          <p>Amazon S3 returns <code>200 OK</code> and copies the data.
      *          </p>
+     * @public
      */
     CopySourceIfMatch?: string;
     /**
-     * @public
      * <p>Copies the object if it has been modified since the specified time.</p>
      *          <p>If both of the
      *       <code>x-amz-copy-source-if-none-match</code> and
@@ -2741,10 +2740,10 @@ export interface UploadPartCopyRequest {
      *          <code>true</code>;</p>
      *          <p>Amazon S3 returns <code>412 Precondition Failed</code> response code.
      *          </p>
+     * @public
      */
     CopySourceIfModifiedSince?: Date;
     /**
-     * @public
      * <p>Copies the object if its entity tag (ETag) is different than the specified ETag.</p>
      *          <p>If both of the
      *       <code>x-amz-copy-source-if-none-match</code> and
@@ -2758,10 +2757,10 @@ export interface UploadPartCopyRequest {
      *          <code>true</code>;</p>
      *          <p>Amazon S3 returns <code>412 Precondition Failed</code> response code.
      *          </p>
+     * @public
      */
     CopySourceIfNoneMatch?: string;
     /**
-     * @public
      * <p>Copies the object if it hasn't been modified since the specified time.</p>
      *          <p>If both of the
      *          <code>x-amz-copy-source-if-match</code> and
@@ -2775,43 +2774,43 @@ export interface UploadPartCopyRequest {
      *          <code>false</code>;</p>
      *          <p>Amazon S3 returns <code>200 OK</code> and copies the data.
      *          </p>
+     * @public
      */
     CopySourceIfUnmodifiedSince?: Date;
     /**
-     * @public
      * <p>The range of bytes to copy from the source object. The range value must use the form
      *          bytes=first-last, where the first and last are the zero-based byte offsets to copy. For
      *          example, bytes=0-9 indicates that you want to copy the first 10 bytes of the source. You
      *          can copy a range only if the source object is greater than 5 MB.</p>
+     * @public
      */
     CopySourceRange?: string;
     /**
-     * @public
      * <p>Object key for which the multipart upload was initiated.</p>
+     * @public
      */
     Key: string | undefined;
     /**
-     * @public
      * <p>Part number of part being copied. This is a positive integer between 1 and
      *          10,000.</p>
+     * @public
      */
     PartNumber: number | undefined;
     /**
-     * @public
      * <p>Upload ID identifying the multipart upload whose part is being copied.</p>
+     * @public
      */
     UploadId: string | undefined;
     /**
-     * @public
      * <p>Specifies the algorithm to use when encrypting the object (for example,
      *          AES256).</p>
      *          <note>
      *             <p>This functionality is not supported when the destination bucket is a directory bucket.</p>
      *          </note>
+     * @public
      */
     SSECustomerAlgorithm?: string;
     /**
-     * @public
      * <p>Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This
      *          value is used to store the object and then it is discarded; Amazon S3 does not store the
      *          encryption key. The key must be appropriate for use with the algorithm specified in the
@@ -2820,49 +2819,49 @@ export interface UploadPartCopyRequest {
      *          <note>
      *             <p>This functionality is not supported when the destination bucket is a directory bucket.</p>
      *          </note>
+     * @public
      */
     SSECustomerKey?: string;
     /**
-     * @public
      * <p>Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses
      *          this header for a message integrity check to ensure that the encryption key was transmitted
      *          without error.</p>
      *          <note>
      *             <p>This functionality is not supported when the destination bucket is a directory bucket.</p>
      *          </note>
+     * @public
      */
     SSECustomerKeyMD5?: string;
     /**
-     * @public
      * <p>Specifies the algorithm to use when decrypting the source object (for example,
      *          <code>AES256</code>).</p>
      *          <note>
      *             <p>This functionality is not supported when the source object is in a directory bucket.</p>
      *          </note>
+     * @public
      */
     CopySourceSSECustomerAlgorithm?: string;
     /**
-     * @public
      * <p>Specifies the customer-provided encryption key for Amazon S3 to use to decrypt the source
      *          object. The encryption key provided in this header must be one that was used when the
      *          source object was created.</p>
      *          <note>
      *             <p>This functionality is not supported when the source object is in a directory bucket.</p>
      *          </note>
+     * @public
      */
     CopySourceSSECustomerKey?: string;
     /**
-     * @public
      * <p>Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses
      *          this header for a message integrity check to ensure that the encryption key was transmitted
      *          without error.</p>
      *          <note>
      *             <p>This functionality is not supported when the source object is in a directory bucket.</p>
      *          </note>
+     * @public
      */
     CopySourceSSECustomerKeyMD5?: string;
     /**
-     * @public
      * <p>Confirms that the requester knows that they will be charged for the request. Bucket
      *          owners need not specify this parameter in their requests. If either the source or
      *          destination S3 bucket has Requester Pays enabled, the requester will pay for
@@ -2872,16 +2871,17 @@ export interface UploadPartCopyRequest {
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestPayer?: RequestPayer;
     /**
-     * @public
      * <p>The account ID of the expected destination bucket owner. If the account ID that you provide does not match the actual owner of the destination bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedBucketOwner?: string;
     /**
-     * @public
      * <p>The account ID of the expected source bucket owner. If the account ID that you provide does not match the actual owner of the source bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
+     * @public
      */
     ExpectedSourceBucketOwner?: string;
 }
@@ -2890,23 +2890,22 @@ export interface UploadPartCopyRequest {
  */
 export interface WriteGetObjectResponseRequest {
     /**
-     * @public
      * <p>Route prefix to the HTTP URL generated.</p>
+     * @public
      */
     RequestRoute: string | undefined;
     /**
-     * @public
      * <p>A single use encrypted token that maps <code>WriteGetObjectResponse</code> to the end
      *          user <code>GetObject</code> request.</p>
+     * @public
      */
     RequestToken: string | undefined;
     /**
-     * @public
      * <p>The object data.</p>
+     * @public
      */
     Body?: StreamingBlobTypes;
     /**
-     * @public
      * <p>The integer status code for an HTTP response of a corresponding <code>GetObject</code>
      *          request. The following is a list of status codes.</p>
      *          <ul>
@@ -2981,69 +2980,69 @@ export interface WriteGetObjectResponseRequest {
      *                </p>
      *             </li>
      *          </ul>
+     * @public
      */
     StatusCode?: number;
     /**
-     * @public
      * <p>A string that uniquely identifies an error condition. Returned in the <Code> tag
      *          of the error XML response for a corresponding <code>GetObject</code> call. Cannot be used
      *          with a successful <code>StatusCode</code> header or when the transformed object is provided
      *          in the body. All error codes from S3 are sentence-cased. The regular expression (regex)
      *          value is <code>"^[A-Z][a-zA-Z]+$"</code>.</p>
+     * @public
      */
     ErrorCode?: string;
     /**
-     * @public
      * <p>Contains a generic description of the error condition. Returned in the <Message>
      *          tag of the error XML response for a corresponding <code>GetObject</code> call. Cannot be
      *          used with a successful <code>StatusCode</code> header or when the transformed object is
      *          provided in body.</p>
+     * @public
      */
     ErrorMessage?: string;
     /**
-     * @public
      * <p>Indicates that a range of bytes was specified.</p>
+     * @public
      */
     AcceptRanges?: string;
     /**
-     * @public
      * <p>Specifies caching behavior along the request/reply chain.</p>
+     * @public
      */
     CacheControl?: string;
     /**
-     * @public
      * <p>Specifies presentational information for the object.</p>
+     * @public
      */
     ContentDisposition?: string;
     /**
-     * @public
      * <p>Specifies what content encodings have been applied to the object and thus what decoding
      *          mechanisms must be applied to obtain the media-type referenced by the Content-Type header
      *          field.</p>
+     * @public
      */
     ContentEncoding?: string;
     /**
-     * @public
      * <p>The language the content is in.</p>
+     * @public
      */
     ContentLanguage?: string;
     /**
-     * @public
      * <p>The size of the content body in bytes.</p>
+     * @public
      */
     ContentLength?: number;
     /**
-     * @public
      * <p>The portion of the object returned in the response.</p>
+     * @public
      */
     ContentRange?: string;
     /**
-     * @public
      * <p>A standard MIME type describing the format of the object data.</p>
+     * @public
      */
     ContentType?: string;
     /**
-     * @public
      * <p>This header can be used as a data integrity check to verify that the data received is
      *          the same data that was originally sent. This specifies the base64-encoded, 32-bit CRC32
      *          checksum of the object returned by the Object Lambda function. This may not match the
@@ -3054,10 +3053,10 @@ export interface WriteGetObjectResponseRequest {
      *          <p>Only one checksum header can be specified at a time. If you supply multiple checksum
      *          headers, this request will fail.</p>
      *          <p></p>
+     * @public
      */
     ChecksumCRC32?: string;
     /**
-     * @public
      * <p>This header can be used as a data integrity check to verify that the data received is
      *          the same data that was originally sent. This specifies the base64-encoded, 32-bit CRC32C
      *          checksum of the object returned by the Object Lambda function. This may not match the
@@ -3067,10 +3066,10 @@ export interface WriteGetObjectResponseRequest {
      *             integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
      *          <p>Only one checksum header can be specified at a time. If you supply multiple checksum
      *          headers, this request will fail.</p>
+     * @public
      */
     ChecksumCRC32C?: string;
     /**
-     * @public
      * <p>This header can be used as a data integrity check to verify that the data received is
      *          the same data that was originally sent. This specifies the base64-encoded, 160-bit SHA-1
      *          digest of the object returned by the Object Lambda function. This may not match the
@@ -3080,10 +3079,10 @@ export interface WriteGetObjectResponseRequest {
      *             integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
      *          <p>Only one checksum header can be specified at a time. If you supply multiple checksum
      *          headers, this request will fail.</p>
+     * @public
      */
     ChecksumSHA1?: string;
     /**
-     * @public
      * <p>This header can be used as a data integrity check to verify that the data received is
      *          the same data that was originally sent. This specifies the base64-encoded, 256-bit SHA-256
      *          digest of the object returned by the Object Lambda function. This may not match the
@@ -3093,140 +3092,141 @@ export interface WriteGetObjectResponseRequest {
      *             integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
      *          <p>Only one checksum header can be specified at a time. If you supply multiple checksum
      *          headers, this request will fail.</p>
+     * @public
      */
     ChecksumSHA256?: string;
     /**
-     * @public
      * <p>Specifies whether an object stored in Amazon S3 is (<code>true</code>) or is not
      *             (<code>false</code>) a delete marker. </p>
+     * @public
      */
     DeleteMarker?: boolean;
     /**
-     * @public
      * <p>An opaque identifier assigned by a web server to a specific version of a resource found
      *          at a URL. </p>
+     * @public
      */
     ETag?: string;
     /**
-     * @public
      * <p>The date and time at which the object is no longer cacheable.</p>
+     * @public
      */
     Expires?: Date;
     /**
-     * @public
      * <p>If the object expiration is configured (see PUT Bucket lifecycle), the response includes
      *          this header. It includes the <code>expiry-date</code> and <code>rule-id</code> key-value
      *          pairs that provide the object expiration information. The value of the <code>rule-id</code>
      *          is URL-encoded. </p>
+     * @public
      */
     Expiration?: string;
     /**
-     * @public
      * <p>The date and time that the object was last modified.</p>
+     * @public
      */
     LastModified?: Date;
     /**
-     * @public
      * <p>Set to the number of metadata entries not returned in <code>x-amz-meta</code> headers.
      *          This can happen if you create metadata using an API like SOAP that supports more flexible
      *          metadata than the REST API. For example, using SOAP, you can create metadata whose values
      *          are not legal HTTP headers.</p>
+     * @public
      */
     MissingMeta?: number;
     /**
-     * @public
      * <p>A map of metadata to store with the object in S3.</p>
+     * @public
      */
     Metadata?: Record<string, string>;
     /**
-     * @public
      * <p>Indicates whether an object stored in Amazon S3 has Object Lock enabled. For more information
      *          about S3 Object Lock, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/object-lock.html">Object Lock</a>.</p>
+     * @public
      */
     ObjectLockMode?: ObjectLockMode;
     /**
-     * @public
      * <p>Indicates whether an object stored in Amazon S3 has an active legal hold.</p>
+     * @public
      */
     ObjectLockLegalHoldStatus?: ObjectLockLegalHoldStatus;
     /**
-     * @public
      * <p>The date and time when Object Lock is configured to expire.</p>
+     * @public
      */
     ObjectLockRetainUntilDate?: Date;
     /**
-     * @public
      * <p>The count of parts this object has.</p>
+     * @public
      */
     PartsCount?: number;
     /**
-     * @public
      * <p>Indicates if request involves bucket that is either a source or destination in a
      *          Replication rule. For more information about S3 Replication, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/replication.html">Replication</a>.</p>
+     * @public
      */
     ReplicationStatus?: ReplicationStatus;
     /**
-     * @public
      * <p>If present, indicates that the requester was successfully charged for the
      *          request.</p>
      *          <note>
      *             <p>This functionality is not supported for directory buckets.</p>
      *          </note>
+     * @public
      */
     RequestCharged?: RequestCharged;
     /**
-     * @public
      * <p>Provides information about object restoration operation and expiration time of the
      *          restored object copy.</p>
+     * @public
      */
     Restore?: string;
     /**
-     * @public
      * <p> The server-side encryption algorithm used when storing requested object in Amazon S3 (for
      *          example, AES256, <code>aws:kms</code>).</p>
+     * @public
      */
     ServerSideEncryption?: ServerSideEncryption;
     /**
-     * @public
      * <p>Encryption algorithm used if server-side encryption with a customer-provided encryption
      *          key was specified for object stored in Amazon S3.</p>
+     * @public
      */
     SSECustomerAlgorithm?: string;
     /**
-     * @public
      * <p> If present, specifies the ID (Key ID, Key ARN, or Key Alias) of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric
      *          encryption customer managed key that was used for stored in Amazon S3 object. </p>
+     * @public
      */
     SSEKMSKeyId?: string;
     /**
-     * @public
      * <p> 128-bit MD5 digest of customer-provided encryption key used in Amazon S3 to encrypt data
      *          stored in S3. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/ServerSideEncryptionCustomerKeys.html">Protecting data
      *             using server-side encryption with customer-provided encryption keys
      *          (SSE-C)</a>.</p>
+     * @public
      */
     SSECustomerKeyMD5?: string;
     /**
-     * @public
      * <p>Provides storage class information of the object. Amazon S3 returns this header for all
      *          objects except for S3 Standard storage class objects.</p>
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/storage-class-intro.html">Storage Classes</a>.</p>
+     * @public
      */
     StorageClass?: StorageClass;
     /**
-     * @public
      * <p>The number of tags, if any, on the object.</p>
+     * @public
      */
     TagCount?: number;
     /**
-     * @public
      * <p>An ID used to reference a specific version of the object.</p>
+     * @public
      */
     VersionId?: string;
     /**
-     * @public
      * <p> Indicates whether the object stored in Amazon S3 uses an S3 bucket key for server-side
      *          encryption with Amazon Web Services KMS (SSE-KMS).</p>
+     * @public
      */
     BucketKeyEnabled?: boolean;
 }