@matter/types 0.16.0-alpha.0-20251022-5a69ce65a → 0.16.0-alpha.0-20251027-17770fb28

package/src/clusters/wi-fi-network-management.ts

@@ -25,6 +25,25 @@ export namespace WiFiNetworkManagement {
      * @see {@link MatterSpecification.v141.Cluster} § 10.2.5.2
      */
     export const TlvNetworkPassphraseResponse = TlvObject({
+        /**
+         * This field shall indicate the current WPA-Personal passphrase or PSK associated with the primary Wi-Fi
+         * network provided by this device, in one of the following formats:
+         *
+         *   • 8..63 bytes: WPA/WPA2/WPA3 passphrase.
+         *
+         *   • 64 bytes: WPA/WPA2/WPA3 raw hex PSK. Each byte shall be a ASCII hexadecimal digit.
+         *
+         * This matches the formats defined for WPA networks by the Credentials field in the Network Commissioning
+         * cluster (see [MatterCore]).
+         *
+         * > [!NOTE]
+         *
+         * > WPA3-Personal permits passphrases shorter than 8 or longer than 63 characters, however the Network
+         *   Commissioning cluster does not currently support configuring Matter devices to connect to operational
+         *   networks utilizing such a passphrase.
+         *
+         * @see {@link MatterSpecification.v141.Cluster} § 10.2.5.2.1
+         */
         passphrase: TlvField(0, TlvByteString.bound({ maxLength: 64 }))
     });
 
@@ -54,7 +73,7 @@ export namespace WiFiNetworkManagement {
              *
              * > The SSID in Wi-Fi is a collection of 1-32 bytes, the text encoding of which is not specified.
              *   Implementations must be careful to support transferring these byte strings without requiring a
-             *   particular encoding. The most common encoding is UTF- 8, however this is just a convention. Some
+             *   particular encoding. The most common encoding is UTF-8, however this is just a convention. Some
              *   configurations may use Latin-1 or other character sets.
              *
              * @see {@link MatterSpecification.v141.Cluster} § 10.2.4.1
@@ -62,7 +81,7 @@ export namespace WiFiNetworkManagement {
             ssid: Attribute(
                 0x0,
                 TlvNullable(TlvByteString.bound({ minLength: 1, maxLength: 32 })),
-                { persistent: true, default: null }
+                { persistent: true }
             ),
 
             /**
@@ -88,7 +107,7 @@ export namespace WiFiNetworkManagement {
             passphraseSurrogate: Attribute(
                 0x1,
                 TlvNullable(TlvUInt64),
-                { persistent: true, default: null, readAcl: AccessLevel.Manage, writeAcl: AccessLevel.Manage }
+                { persistent: true, readAcl: AccessLevel.Manage, writeAcl: AccessLevel.Manage }
             )
         },
 

package/src/clusters/window-covering.ts

@@ -722,6 +722,9 @@ export namespace WindowCovering {
 
         commands: {
             /**
+             * This command is used to set the target lift position of the window covering to the percentage value
+             * specified in the command.
+             *
              * Upon receipt of this command, the server will adjust the window covering to the lift/slide percentage
              * specified in the payload of this command.
              *
@@ -760,6 +763,9 @@ export namespace WindowCovering {
 
         commands: {
             /**
+             * This command is used to set the target tilt position of the window covering to the percentage value
+             * specified in the command.
+             *
              * Upon receipt of this command, the server will adjust the window covering to the tilt percentage specified
              * in the payload of this command.
              *
@@ -821,6 +827,9 @@ export namespace WindowCovering {
 
         commands: {
             /**
+             * This command is used to set the target lift position of the window covering to the percentage value
+             * specified in the command.
+             *
              * Upon receipt of this command, the server will adjust the window covering to the lift/slide percentage
              * specified in the payload of this command.
              *
@@ -882,6 +891,9 @@ export namespace WindowCovering {
 
         commands: {
             /**
+             * This command is used to set the target tilt position of the window covering to the percentage value
+             * specified in the command.
+             *
              * Upon receipt of this command, the server will adjust the window covering to the tilt percentage specified
              * in the payload of this command.
              *
@@ -910,6 +922,9 @@ export namespace WindowCovering {
     export const LiftAndAbsolutePositionComponent = MutableCluster.Component({
         commands: {
             /**
+             * This command is used to set the target lift position of the window covering to the value specified in the
+             * command.
+             *
              * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.4
              */
             goToLiftValue: OptionalCommand(0x4, TlvGoToLiftValueRequest, 0x4, TlvNoResponse)
@@ -922,6 +937,9 @@ export namespace WindowCovering {
     export const TiltAndAbsolutePositionComponent = MutableCluster.Component({
         commands: {
             /**
+             * This command is used to set the target tilt position of the window covering to the value specified in the
+             * command.
+             *
              * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.6
              */
             goToTiltValue: OptionalCommand(0x7, TlvGoToTiltValueRequest, 0x7, TlvNoResponse)
@@ -934,7 +952,7 @@ export namespace WindowCovering {
     export const Base = MutableCluster.Component({
         id: 0x102,
         name: "WindowCovering",
-        revision: 5,
+        revision: 6,
 
         features: {
             /**
@@ -979,6 +997,14 @@ export namespace WindowCovering {
             /**
              * This attribute shall identify the type of window covering.
              *
+             * If the window covering supports the LF feature and not the TL feature, the following types shall be used
+             * as the constraint for this attribute:
+             *
+             * If the window covering supports the TL feature and not the LF feature, the following types shall be used
+             * as the constraint for this attribute:
+             *
+             * If the window covering supports both the LF and TL features, the following types are allowed to be used:
+             *
              * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.1
              */
             type: FixedAttribute(0x0, TlvEnum<WindowCoveringType>(), { default: WindowCoveringType.Rollershade }),
@@ -1004,6 +1030,14 @@ export namespace WindowCovering {
              * This attribute SHOULD provide more detail about the product type than can be determined from the main
              * category indicated by the Type attribute.
              *
+             * If the window covering supports the LF feature and not the TL feature, the following types shall be used
+             * as the constraint for this attribute:
+             *
+             * If the window covering supports the TL feature and not the LF feature, the following types shall be used
+             * as the constraint for this attribute:
+             *
+             * If the window covering supports both the LF and TL features, the following types are allowed to be used:
+             *
              * The table below helps to match the EndProductType attribute with the Type attribute.
              *
              * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.16

package/src/globals/Currency.ts

@@ -0,0 +1,32 @@
+/**
+ * @license
+ * Copyright 2022-2025 Matter.js Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/*** THIS FILE IS GENERATED, DO NOT EDIT ***/
+
+import { TlvField, TlvObject } from "../tlv/TlvObject.js";
+import { TlvUInt16, TlvUInt8 } from "../tlv/TlvNumber.js";
+import { TypeFromSchema } from "../tlv/TlvSchema.js";
+
+/**
+ * Currency
+ *
+ * This data type represents a currency with an associated number of decimal points.
+ *
+ * @see {@link MatterSpecification.v141.Core} § 7.19.2.51
+ */
+export const TlvCurrency = TlvObject({
+    currency: TlvField(0, TlvUInt16.bound({ max: 999 })),
+    decimalPoints: TlvField(1, TlvUInt8)
+});
+
+/**
+ * Currency
+ *
+ * This data type represents a currency with an associated number of decimal points.
+ *
+ * @see {@link MatterSpecification.v141.Core} § 7.19.2.51
+ */
+export interface Currency extends TypeFromSchema<typeof TlvCurrency> {}

package/src/globals/Locationdesc.ts

@@ -17,7 +17,7 @@ import { TypeFromSchema } from "../tlv/TlvSchema.js";
  *
  * This data type shall be represented by the following structure:
  *
- * @see {@link MatterSpecification.v141.Core} § 7.19.2.45
+ * @see {@link MatterSpecification.v141.Core} § 7.19.2.49
  */
 export const TlvLocationdesc = TlvObject({
     /**
@@ -27,7 +27,7 @@ export const TlvLocationdesc = TlvObject({
      * synthesized user-friendly, understandable, names for the location, rather than opaque values such as "private" or
      * "2fe7c241-a50a-4863-896e-c5878da5ed68".
      *
-     * @see {@link MatterSpecification.v141.Core} § 7.19.2.45.1
+     * @see {@link MatterSpecification.v141.Core} § 7.19.2.49.1
      */
     locationName: TlvField(0, TlvString.bound({ maxLength: 128 })),
 
@@ -41,7 +41,7 @@ export const TlvLocationdesc = TlvObject({
      * FloorNumber tag value 0x1. If the client operates in North America, building level 1, which is at street level,
      * SHOULD be mapped to FloorNumber tag value 0x0.
      *
-     * A null value indicates that this information is not available.
+     * A NULL value indicates that this information is not available.
      *
      * When the clients present the level information for user selection, they SHOULD use the operating region to
      * determine how to render and map this data. For example, if the client operates in North America it SHOULD present
@@ -58,7 +58,7 @@ export const TlvLocationdesc = TlvObject({
      * > Handling complex level situations, such as half levels (side split houses), or the levels from an apartment
      *   building, is up to the client and/or user.
      *
-     * @see {@link MatterSpecification.v141.Core} § 7.19.2.45.2
+     * @see {@link MatterSpecification.v141.Core} § 7.19.2.49.2
      */
     floorNumber: TlvField(1, TlvNullable(TlvInt16)),
 
@@ -66,14 +66,14 @@ export const TlvLocationdesc = TlvObject({
      * This field shall be the ID of an area semantic tag, located within the Common Area Namespace. For example, this
      * tag may indicate that the location refers to a bedroom.
      *
-     * If this field is null, that indicates that the area type information is not available.
+     * If this field is NULL, that indicates that the area type information is not available.
      *
      * > [!NOTE]
      *
      * > This field only indicates the type of the area. Multiple areas of the same type, such as bedrooms, may exist in
      *   a user’s home.
      *
-     * @see {@link MatterSpecification.v141.Core} § 7.19.2.45.3
+     * @see {@link MatterSpecification.v141.Core} § 7.19.2.49.3
      */
     areaType: TlvField(2, TlvNullable(TlvUInt8))
 });
@@ -83,6 +83,6 @@ export const TlvLocationdesc = TlvObject({
  *
  * This data type shall be represented by the following structure:
  *
- * @see {@link MatterSpecification.v141.Core} § 7.19.2.45
+ * @see {@link MatterSpecification.v141.Core} § 7.19.2.49
  */
 export interface Locationdesc extends TypeFromSchema<typeof TlvLocationdesc> {}

package/src/globals/MeasurementAccuracy.ts

@@ -18,13 +18,13 @@ import { TypeFromSchema } from "../tlv/TlvSchema.js";
  * This struct represents the set of accuracy ranges for a given measurement, the maximum and minimum values for the
  * measurement, and whether the measurement is directly measured or just estimated from other information.
  *
- * @see {@link MatterSpecification.v141.Cluster} § 2.1.4.4
+ * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.3
  */
 export const TlvMeasurementAccuracy = TlvObject({
     /**
      * This field shall indicate the type of measurement for the accuracy provided.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 2.1.4.4.1
+     * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.3.1
      */
     measurementType: TlvField(0, TlvEnum<MeasurementType>()),
 
@@ -32,7 +32,7 @@ export const TlvMeasurementAccuracy = TlvObject({
      * This field shall indicate whether the associated measurement was directly measured. If this field is not set to
      * true, then the associated measurement was estimated.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 2.1.4.4.2
+     * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.3.2
      */
     measured: TlvField(1, TlvBoolean),
 
@@ -52,7 +52,7 @@ export const TlvMeasurementAccuracy = TlvObject({
      * one more the value of the RangeMax field on the previous MeasurementAccuracyRangeStruct in this list (i.e. there
      * shall be no gaps in the accuracy ranges, and the ranges shall be in increasing order).
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 2.1.4.4.5
+     * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.3.5
      */
     accuracyRanges: TlvField(4, TlvArray(TlvMeasurementAccuracyRange, { minLength: 1 }))
 });
@@ -61,6 +61,6 @@ export const TlvMeasurementAccuracy = TlvObject({
  * This struct represents the set of accuracy ranges for a given measurement, the maximum and minimum values for the
  * measurement, and whether the measurement is directly measured or just estimated from other information.
  *
- * @see {@link MatterSpecification.v141.Cluster} § 2.1.4.4
+ * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.3
  */
 export interface MeasurementAccuracy extends TypeFromSchema<typeof TlvMeasurementAccuracy> {}

package/src/globals/MeasurementAccuracyRange.ts

@@ -36,7 +36,7 @@ import { TypeFromSchema } from "../tlv/TlvSchema.js";
  *
  *     ◦ the reported value shall be greater than or equal to the true value minus FixedMax.
  *
- * @see {@link MatterSpecification.v141.Cluster} § 2.1.4.3
+ * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.2
  */
 export const TlvMeasurementAccuracyRange = TlvObject({
     /**
@@ -48,7 +48,7 @@ export const TlvMeasurementAccuracyRange = TlvObject({
      * The value of this field shall be less than or equal to the value of the MaxMeasuredValue field on the
      * encompassing MeasurementAccuracyStruct.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 2.1.4.3.1
+     * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.2.1
      */
     rangeMin: TlvField(0, TlvInt64),
 
@@ -62,28 +62,28 @@ export const TlvMeasurementAccuracyRange = TlvObject({
      * The value of this field shall be less than or equal to the value of the MaxMeasuredValue field on the
      * encompassing MeasurementAccuracyStruct.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 2.1.4.3.2
+     * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.2.2
      */
     rangeMax: TlvField(1, TlvInt64),
 
     /**
      * This field shall indicate the maximum +/- percentage accuracy for the associated measurement.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 2.1.4.3.3
+     * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.2.3
      */
     percentMax: TlvOptionalField(2, TlvPercent100ths),
 
     /**
      * This field shall indicate the minimum +/- percentage accuracy for the associated measurement.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 2.1.4.3.4
+     * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.2.4
      */
     percentMin: TlvOptionalField(3, TlvPercent100ths),
 
     /**
      * This field shall indicate the typical +/- percentage accuracy for the associated measurement.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 2.1.4.3.5
+     * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.2.5
      */
     percentTypical: TlvOptionalField(4, TlvPercent100ths),
 
@@ -91,7 +91,7 @@ export const TlvMeasurementAccuracyRange = TlvObject({
      * This field shall indicate the maximum +/- fixed accuracy for the associated measurement, in the unit indicated by
      * MeasurementType.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 2.1.4.3.6
+     * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.2.6
      */
     fixedMax: TlvOptionalField(5, TlvUInt64),
 
@@ -99,7 +99,7 @@ export const TlvMeasurementAccuracyRange = TlvObject({
      * This field shall indicate the minimum +/- fixed accuracy for the associated measurement, in the unit indicated by
      * MeasurementType.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 2.1.4.3.7
+     * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.2.7
      */
     fixedMin: TlvOptionalField(6, TlvUInt64),
 
@@ -107,7 +107,7 @@ export const TlvMeasurementAccuracyRange = TlvObject({
      * This field shall indicate the typical +/- fixed accuracy for the associated measurement, in the unit indicated by
      * MeasurementType.
      *
-     * @see {@link MatterSpecification.v141.Cluster} § 2.1.4.3.8
+     * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.2.8
      */
     fixedTypical: TlvOptionalField(7, TlvUInt64)
 });
@@ -138,6 +138,6 @@ export const TlvMeasurementAccuracyRange = TlvObject({
  *
  *     ◦ the reported value shall be greater than or equal to the true value minus FixedMax.
  *
- * @see {@link MatterSpecification.v141.Cluster} § 2.1.4.3
+ * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.2
  */
 export interface MeasurementAccuracyRange extends TypeFromSchema<typeof TlvMeasurementAccuracyRange> {}

package/src/globals/MeasurementType.ts

@@ -7,7 +7,7 @@
 /*** THIS FILE IS GENERATED, DO NOT EDIT ***/
 
 /**
- * @see {@link MatterSpecification.v141.Cluster} § 2.1.4.2
+ * @see {@link MatterSpecification.v141.Cluster} § 2.1.3.1
  */
 export enum MeasurementType {
     Unspecified = 0,
@@ -80,5 +80,20 @@ export enum MeasurementType {
     /**
      * Electrical energy in milliwatt-hours (mWh)
      */
-    ElectricalEnergy = 14
+    ElectricalEnergy = 14,
+
+    /**
+     * Reactive power in millivolt-amp-hours reactive (mVARh)
+     */
+    ReactiveEnergy = 15,
+
+    /**
+     * Apparent power in millivolt-amp-hours (mVAh)
+     */
+    ApparentEnergy = 16,
+
+    /**
+     * Soil moisture in percent
+     */
+    SoilMoisture = 17
 }

package/src/globals/Namespace.ts

@@ -11,12 +11,19 @@
  *
  * The Namespace type identifies the namespace used for a semantic tag.
  *
- * @see {@link MatterSpecification.v141.Core} § 7.19.2.43
+ * @see {@link MatterSpecification.v141.Core} § 7.19.2.47
  */
 export enum Namespace {
     /**
      * The tags contained in this namespace may be used in any domain or context, to indicate an association with a
      * feature of a Closure, e.g. the button to activate opening a garage door.
+     *
+     * > [!NOTE]
+     *
+     * > This namespace has been deprecated as of Matter 1.4.2.
+     *
+     * Clients SHOULD still have support for these tags, since the tags could be used by a server certified on a
+     * previous revision of Matter.
      */
     Closure = 1,
 
@@ -75,6 +82,9 @@ export enum Namespace {
      * number comprised of Arabic numerals encoded as a string to indicate the row/column of the item. Number words
      * (e.g. "one", "two", etc.) shall NOT be used to describe the position of the item. The first row/column shall use
      * Label "1".
+     *
+     * The following example illustrates a compound device comprised of 9 endpoints arranged in a 3x3 grid. This example
+     * uses position tags to indicate position.
      */
     Position = 8,
 
@@ -135,8 +145,8 @@ export enum Namespace {
      * client to make an optimized user interface which matches the actual device without requiring a-priori knowledge
      * of the layout of each specific switch device.
      *
-     * Please see the rules for applying these and other tags for switch devices, e.g. from the Common Position
-     * Namespace and the Common Number Namespace in the Generic Switch device type section in the Device Library.
+     * See the rules for applying these and other tags for switch devices, e.g. from the Common Position Namespace and
+     * the Common Number Namespace in the Generic Switch device type section in the Device Library.
      */
     Switches = 67
 }

package/src/globals/Price.ts

@@ -0,0 +1,30 @@
+/**
+ * @license
+ * Copyright 2022-2025 Matter.js Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/*** THIS FILE IS GENERATED, DO NOT EDIT ***/
+
+import { TlvField, TlvObject } from "../tlv/TlvObject.js";
+import { TlvInt64 } from "../tlv/TlvNumber.js";
+import { TlvCurrency } from "./Currency.js";
+import { TypeFromSchema } from "../tlv/TlvSchema.js";
+
+/**
+ * Price
+ *
+ * This data type represents an amount of money in a given currency.
+ *
+ * @see {@link MatterSpecification.v141.Core} § 7.19.2.54
+ */
+export const TlvPrice = TlvObject({ amount: TlvField(0, TlvInt64), currency: TlvField(1, TlvCurrency) });
+
+/**
+ * Price
+ *
+ * This data type represents an amount of money in a given currency.
+ *
+ * @see {@link MatterSpecification.v141.Core} § 7.19.2.54
+ */
+export interface Price extends TypeFromSchema<typeof TlvPrice> {}

package/src/globals/Priority.ts

@@ -13,7 +13,7 @@
  * particular ordering among the values. Specific uses of the data type may assign semantics to the values that imply an
  * ordering relationship.
  *
- * @see {@link MatterSpecification.v141.Core} § 7.19.2.17
+ * @see {@link MatterSpecification.v141.Core} § 7.19.2.20
  */
 export enum Priority {
     /**

package/src/globals/Semtag.ts

@@ -19,11 +19,11 @@ import { TypeFromSchema } from "../tlv/TlvSchema.js";
  *
  * This data type shall be represented by the following structure:
  *
- * @see {@link MatterSpecification.v141.Core} § 7.19.2.42
+ * @see {@link MatterSpecification.v141.Core} § 7.19.2.46
  */
 export const TlvSemtag = TlvObject({
     /**
-     * If the MfgCode field is not null, it shall be the Vendor ID of the manufacturer who has defined a certain
+     * If the MfgCode field is not NULL, it shall be the Vendor ID of the manufacturer who has defined a certain
      * namespace and the NamespaceID field shall be the ID of a namespace defined by the manufacturer identified in the
      * MfgCode field.
      *
@@ -31,9 +31,9 @@ export const TlvSemtag = TlvObject({
      * at least one standard tag which is not from any manufacturer’s namespace. A standard tag is a tag from a common
      * namespace, a derived cluster namespace, or an applicable device-specific namespace.
      *
-     * If MfgCode is null, the NamespaceID field shall indicate a standard namespace.
+     * If MfgCode is NULL, the NamespaceID field shall indicate a standard namespace.
      *
-     * @see {@link MatterSpecification.v141.Core} § 7.19.2.42.1
+     * @see {@link MatterSpecification.v141.Core} § 7.19.2.46.1
      */
     mfgCode: TlvField(0, TlvNullable(TlvVendorId)),
 
@@ -42,7 +42,7 @@ export const TlvSemtag = TlvObject({
      *
      * The common and device-specific semantic tag namespaces are listed in StandardNamespaces.
      *
-     * @see {@link MatterSpecification.v141.Core} § 7.19.2.42.2
+     * @see {@link MatterSpecification.v141.Core} § 7.19.2.46.2
      */
     namespaceId: TlvField(1, TlvEnum<Namespace>()),
 
@@ -52,7 +52,7 @@ export const TlvSemtag = TlvObject({
      * A device may expose tags from the common or device-specific namespaces and from manufacturer-specific namespaces
      * in a single TagList.
      *
-     * @see {@link MatterSpecification.v141.Core} § 7.19.2.42.3
+     * @see {@link MatterSpecification.v141.Core} § 7.19.2.46.3
      */
     tag: TlvField(2, TlvUInt8),
 
@@ -60,12 +60,12 @@ export const TlvSemtag = TlvObject({
      * The Label field, if present, shall contain human-readable text suitable for display on a client. The content of
      * the Label field is defined by the manufacturer.
      *
-     * This field shall be present when the MfgCode is not null. This field SHOULD NOT be used if the Tag is from a
+     * This field shall be present when the MfgCode is not NULL. This field SHOULD NOT be used if the Tag is from a
      * standard namespace, unless the Tag requires further qualification. For example: A Tag that has the meaning of
      * "room" in a location namespace, would require the a label string to qualify the type of room, such as "1", "2b",
      * "Bathroom", etc.
      *
-     * @see {@link MatterSpecification.v141.Core} § 7.19.2.42.4
+     * @see {@link MatterSpecification.v141.Core} § 7.19.2.46.4
      */
     label: TlvOptionalField(3, TlvNullable(TlvString.bound({ maxLength: 64 })))
 });
@@ -75,6 +75,6 @@ export const TlvSemtag = TlvObject({
  *
  * This data type shall be represented by the following structure:
  *
- * @see {@link MatterSpecification.v141.Core} § 7.19.2.42
+ * @see {@link MatterSpecification.v141.Core} § 7.19.2.46
  */
 export interface Semtag extends TypeFromSchema<typeof TlvSemtag> {}

package/src/globals/SoftwareVersionCertificationStatus.ts

@@ -20,7 +20,7 @@ export enum SoftwareVersionCertificationStatus {
 
     /**
      * used for a SoftwareVersion when going into certification testing (These might or might not be placed in DCL,
-     * depending on CSA policy and procedures)
+     * depending on the Connectivity Standards Alliance policy and procedures)
      */
     Provisional = 1,
 

package/src/globals/Status.ts

@@ -62,7 +62,7 @@ export enum Status {
     UnsupportedCommand = 129,
 
     /**
-     * The cluster command is malformed, has missing fields, or fields with invalid values.Command not carried out.
+     * The cluster command is malformed, has missing fields, or fields with invalid values. Command not carried out.
      *
      * @see {@link MatterSpecification.v141.Core} § 8.10.1
      */
@@ -227,17 +227,39 @@ export enum Status {
     NoCommandResponse = 204,
 
     /**
-     * The node requires updated TC acceptance. The user MAY be directed to visit the EnhancedSetupFlowMaintenan ceUrl
-     * to complete this.
+     * The node requires updated TC acceptance. The user MAY be directed to visit the EnhancedSetupFlowMaintenanceUrl to
+     * complete this.
      *
      * @see {@link MatterSpecification.v141.Core} § 8.10.1
      */
     TermsAndConditionsChanged = 205,
 
     /**
-     * The node requires the user to visit the EnhancedSetupFlowMaintenan ceUrl for instructions on further action.
+     * The node requires the user to visit the EnhancedSetupFlowMaintenanceUrl for instructions on further action.
      *
      * @see {@link MatterSpecification.v141.Core} § 8.10.1
      */
-    MaintenanceRequired = 206
+    MaintenanceRequired = 206,
+
+    /**
+     * The value for the data type was not accepted due to runtime validation issues. Command or action not carried out.
+     *
+     * @see {@link MatterSpecification.v141.Core} § 8.10.1
+     */
+    DynamicConstraintError = 207,
+
+    /**
+     * Attempt to create an entity that already exists or create an entity with an identifier that is already in use.
+     * Command or action not carried out.
+     *
+     * @see {@link MatterSpecification.v141.Core} § 8.10.1
+     */
+    AlreadyExists = 208,
+
+    /**
+     * Attempt to process on a transport type not valid for this element. Command or action not carried out.
+     *
+     * @see {@link MatterSpecification.v141.Core} § 8.10.1
+     */
+    InvalidTransportType = 209
 }

package/src/globals/ThreeLevelAuto.ts

@@ -0,0 +1,37 @@
+/**
+ * @license
+ * Copyright 2022-2025 Matter.js Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/*** THIS FILE IS GENERATED, DO NOT EDIT ***/
+
+/**
+ * Three-Level Auto Setting
+ *
+ * It is used for a three-level and Auto setting of an attribute on a device. This data type has four values as
+ * enumerated below, and cannot be expanded.
+ *
+ * @see {@link MatterSpecification.v141.Core} § 7.19.2.50
+ */
+export enum ThreeLevelAuto {
+    /**
+     * Automatic Level
+     */
+    Auto = 0,
+
+    /**
+     * Low Level
+     */
+    Low = 1,
+
+    /**
+     * Medium Level
+     */
+    Medium = 2,
+
+    /**
+     * High Level
+     */
+    High = 3
+}

package/src/globals/WildcardPathFlags.ts

@@ -12,7 +12,7 @@ import { BitFlag } from "../schema/BitmapSchema.js";
  * The WildcardPathFlagsBitmap indicates flags that apply to the path, affecting wildcard expansion. The following flags
  * are defined:
  *
- * @see {@link MatterSpecification.v141.Core} § 8.9.2.3
+ * @see {@link MatterSpecification.v141.Core} § 8.9.2.5
  */
 export const WildcardPathFlags = {
     /**
@@ -30,7 +30,7 @@ export const WildcardPathFlags = {
      */
     wildcardSkipAttributeList: BitFlag(2),
 
-    reserved: BitFlag(3),
+    doNotUse: BitFlag(3),
 
     /**
      * Skip the AcceptedCommandList and GeneratedCommandList global attributes during wildcard expansion.