@matter/types 0.13.0-alpha.0-20250329-cd36948da → 0.13.0-alpha.0-20250330-df5a17eba

package/dist/esm/clusters/window-covering.js

@@ -37,7 +37,7 @@ var WindowCovering;
     /**
      * This field shall specify the requested physical lift/slide position in unit cm (centimeters).
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 5.3.7.4.1
+     * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.4.1
      */
     liftValue: TlvField(0, TlvUInt16)
   });
@@ -45,7 +45,7 @@ var WindowCovering;
     /**
      * This field shall specify the requested physical tilt position in unit 0.1° (tenth of a degrees).
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 5.3.7.6.1
+     * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.6.1
      */
     tiltValue: TlvField(0, TlvUInt16)
   });
@@ -73,7 +73,7 @@ var WindowCovering;
      *
      *   • 1 = Operational
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 5.3.5.1.1
+     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.1.1
      */
     operational: BitFlag(0),
     onlineReserved: BitFlag(1),
@@ -86,7 +86,7 @@ var WindowCovering;
      *
      *   • 1 = Lift movement is reversed
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 5.3.5.1.2
+     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.1.2
      */
     liftMovementReversed: BitFlag(2),
     /**
@@ -98,7 +98,7 @@ var WindowCovering;
      *
      *   • 1 = Lift control is position aware (PA_LF)
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 5.3.5.1.3
+     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.1.3
      */
     liftPositionAware: BitFlag(3),
     /**
@@ -110,7 +110,7 @@ var WindowCovering;
      *
      *   • 1 = Tilt control is position aware (PA_TL)
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 5.3.5.1.4
+     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.1.4
      */
     tiltPositionAware: BitFlag(4),
     /**
@@ -123,7 +123,7 @@ var WindowCovering;
      *
      *   • 1 = Encoder Controlled
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 5.3.5.1.5
+     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.1.5
      */
     liftEncoderControlled: BitFlag(5),
     /**
@@ -136,7 +136,7 @@ var WindowCovering;
      *
      *   • 1 = Encoder Controlled
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 5.3.5.1.6
+     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.1.6
      */
     tiltEncoderControlled: BitFlag(6)
   };
@@ -147,7 +147,7 @@ var WindowCovering;
      * These bits shall indicate in which direction the covering is currently moving or if it has stopped. Global
      * operational state shall always reflect the overall motion of the device.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 5.3.5.3.1
+     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.3.1
      */
     global: BitFieldEnum(0, 2),
     /**
@@ -155,7 +155,7 @@ var WindowCovering;
      *
      * These bits shall indicate in which direction the covering’s lift is currently moving or if it has stopped.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 5.3.5.3.2
+     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.3.2
      */
     lift: BitFieldEnum(2, 2),
     /**
@@ -163,7 +163,7 @@ var WindowCovering;
      *
      * These bits shall indicate in which direction the covering’s tilt is currently moving or if it has stopped.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 5.3.5.3.3
+     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.3.3
      */
     tilt: BitFieldEnum(4, 2)
   };
@@ -211,7 +211,7 @@ var WindowCovering;
      *
      *   • 1 = Lift movement is reversed
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 5.3.5.2.1
+     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.2.1
      */
     motorDirectionReversed: BitFlag(0),
     /**
@@ -223,7 +223,7 @@ var WindowCovering;
      *
      *   • 1 = Calibration mode
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 5.3.5.2.2
+     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.2.2
      */
     calibrationMode: BitFlag(1),
     /**
@@ -235,7 +235,7 @@ var WindowCovering;
      *
      *   • 1 = Maintenance mode
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 5.3.5.2.3
+     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.2.3
      */
     maintenanceMode: BitFlag(2),
     /**
@@ -247,7 +247,7 @@ var WindowCovering;
      *
      *   • 1 = LEDs will display feedback
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 5.3.5.2.4
+     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.2.4
      */
     ledFeedback: BitFlag(3)
   };
@@ -310,28 +310,28 @@ var WindowCovering;
        * Indicates the maximum possible encoder position possible (Unit cm, centimeters) to position the height of
        * the window covering lift.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.2
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.2
        */
       physicalClosedLimitLift: OptionalFixedAttribute(1, TlvUInt16, { default: 0 }),
       /**
        * Indicates the actual lift position (Unit cm, centimeters) of the window covering from the fully-open
        * position.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.4
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.4
        */
       currentPositionLift: OptionalAttribute(3, TlvNullable(TlvUInt16), { persistent: true, default: null }),
       /**
        * Indicates the open limit for lifting the window covering whether position (in centimeters) is encoded or
        * timed.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.17
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.17
        */
       installedOpenLimitLift: Attribute(16, TlvUInt16.bound({ max: 65534 }), { persistent: true, default: 0 }),
       /**
        * Indicates the closed limit for lifting the window covering whether position (in centimeters) is encoded
        * or timed.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.18
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.18
        */
       installedClosedLimitLift: Attribute(
         17,
@@ -346,28 +346,28 @@ var WindowCovering;
        * Indicates the maximum possible encoder position possible (Unit 0.1°, tenths of a degree) to position the
        * angle of the window covering tilt.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.3
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.3
        */
       physicalClosedLimitTilt: OptionalFixedAttribute(2, TlvUInt16, { default: 0 }),
       /**
        * Indicates the actual tilt position (Unit 0.1°, tenths of a degree) of the window covering from the
        * fully-open position.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.5
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.5
        */
       currentPositionTilt: OptionalAttribute(4, TlvNullable(TlvUInt16), { persistent: true, default: null }),
       /**
        * Indicates the open limit for tilting the window covering whether position (in tenth of a degree) is
        * encoded or timed.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.19
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.19
        */
       installedOpenLimitTilt: Attribute(18, TlvUInt16.bound({ max: 65534 }), { persistent: true, default: 0 }),
       /**
        * Indicates the closed limit for tilting the window covering whether position (in tenth of a degree) is
        * encoded or timed.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.20
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.20
        */
       installedClosedLimitTilt: Attribute(
         19,
@@ -382,7 +382,7 @@ var WindowCovering;
        * Indicates the total number of lift/slide actuations applied to the window covering since the device was
        * installed.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.6
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.6
        */
       numberOfActuationsLift: OptionalAttribute(5, TlvUInt16, { persistent: true, default: 0 })
     },
@@ -404,7 +404,7 @@ var WindowCovering;
        * only a tilt control device, then the command SHOULD be ignored and a UNSUPPORTED_COMMAND status SHOULD be
        * returned.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.7.5
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.5
        */
       goToLiftPercentage: OptionalCommand(5, WindowCovering2.TlvGoToLiftPercentageRequest, 5, TlvNoResponse)
     }
@@ -415,7 +415,7 @@ var WindowCovering;
        * Indicates the total number of tilt actuations applied to the window covering since the device was
        * installed.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.7
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.7
        */
       numberOfActuationsTilt: OptionalAttribute(6, TlvUInt16, { persistent: true, default: 0 })
     },
@@ -437,7 +437,7 @@ var WindowCovering;
        * only a tilt control device, then the command SHOULD be ignored and a UNSUPPORTED_COMMAND status SHOULD be
        * returned.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.7.7
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.7
        */
       goToTiltPercentage: OptionalCommand(8, WindowCovering2.TlvGoToTiltPercentageRequest, 8, TlvNoResponse)
     }
@@ -448,7 +448,7 @@ var WindowCovering;
        * Indicates the actual position as a percentage from 0% to 100% with 1% default step. This attribute is
        * equal to CurrentPositionLiftPercent100ths attribute divided by 100.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.11
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.11
        */
       currentPositionLiftPercentage: OptionalAttribute(
         8,
@@ -459,13 +459,13 @@ var WindowCovering;
        * Indicates the position where the window covering lift will go or is moving to as a percentage (Unit
        * 0.01%).
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.13
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.13
        */
       targetPositionLiftPercent100ths: Attribute(11, TlvNullable(TlvPercent100ths), { default: null }),
       /**
        * Indicates the actual position as a percentage with a minimal step of 0.01%. E.g Max 10000 equals 100.00%.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.9
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.9
        */
       currentPositionLiftPercent100ths: Attribute(
         14,
@@ -491,7 +491,7 @@ var WindowCovering;
        * only a tilt control device, then the command SHOULD be ignored and a UNSUPPORTED_COMMAND status SHOULD be
        * returned.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.7.5
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.5
        */
       goToLiftPercentage: Command(5, WindowCovering2.TlvGoToLiftPercentageRequest, 5, TlvNoResponse)
     }
@@ -502,7 +502,7 @@ var WindowCovering;
        * Indicates the actual position as a percentage from 0% to 100% with 1% default step. This attribute is
        * equal to CurrentPositionTiltPercent100ths attribute divided by 100.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.12
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.12
        */
       currentPositionTiltPercentage: OptionalAttribute(
         9,
@@ -513,13 +513,13 @@ var WindowCovering;
        * Indicates the position where the window covering tilt will go or is moving to as a percentage (Unit
        * 0.01%).
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.14
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.14
        */
       targetPositionTiltPercent100ths: Attribute(12, TlvNullable(TlvPercent100ths), { default: null }),
       /**
        * Indicates the actual position as a percentage with a minimal step of 0.01%. E.g Max 10000 equals 100.00%.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.10
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.10
        */
       currentPositionTiltPercent100ths: Attribute(
         15,
@@ -545,7 +545,7 @@ var WindowCovering;
        * only a tilt control device, then the command SHOULD be ignored and a UNSUPPORTED_COMMAND status SHOULD be
        * returned.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.7.7
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.7
        */
       goToTiltPercentage: Command(8, WindowCovering2.TlvGoToTiltPercentageRequest, 8, TlvNoResponse)
     }
@@ -553,7 +553,7 @@ var WindowCovering;
   WindowCovering2.LiftAndAbsolutePositionComponent = MutableCluster.Component({
     commands: {
       /**
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.7.4
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.4
        */
       goToLiftValue: OptionalCommand(4, WindowCovering2.TlvGoToLiftValueRequest, 4, TlvNoResponse)
     }
@@ -561,7 +561,7 @@ var WindowCovering;
   WindowCovering2.TiltAndAbsolutePositionComponent = MutableCluster.Component({
     commands: {
       /**
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.7.6
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.6
        */
       goToTiltValue: OptionalCommand(7, WindowCovering2.TlvGoToTiltValueRequest, 7, TlvNoResponse)
     }
@@ -578,7 +578,7 @@ var WindowCovering;
        * is lift Open and Close) or slide left to right (e.g. for a sliding curtain, Left and Right is lift Open
        * and Close).
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.4.1
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.4.1
        */
       lift: BitFlag(0),
       /**
@@ -586,7 +586,7 @@ var WindowCovering;
        *
        * The Tilt feature applies to window coverings with vertical or horizontal strips.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.4.2
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.4.2
        */
       tilt: BitFlag(1),
       /**
@@ -604,7 +604,7 @@ var WindowCovering;
        * As a general rule, absolute positioning (in centimeters or tenth of a degrees) SHOULD NOT be supported
        * for new implementations.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.4.4
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.4.4
        */
       absolutePosition: BitFlag(3),
       /**
@@ -618,7 +618,7 @@ var WindowCovering;
       /**
        * This attribute shall identify the type of window covering.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.1
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.1
        */
       type: FixedAttribute(0, TlvEnum(), { default: 0 /* Rollershade */ }),
       /**
@@ -627,13 +627,13 @@ var WindowCovering;
        * To change settings, devices shall write to the Mode attribute. The behavior causing the setting or
        * clearing of each bit is vendor specific.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.8
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.8
        */
       configStatus: Attribute(7, TlvBitmap(TlvUInt8, WindowCovering2.ConfigStatus), { persistent: true }),
       /**
        * Indicates the currently ongoing operations and applies to all type of devices.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.15
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.15
        */
       operationalStatus: Attribute(10, TlvBitmap(TlvUInt8, WindowCovering2.OperationalStatus)),
       /**
@@ -642,7 +642,7 @@ var WindowCovering;
        *
        * The table below helps to match the EndProductType attribute with the Type attribute.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.16
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.16
        */
       endProductType: FixedAttribute(13, TlvEnum(), { default: 0 /* RollerShade */ }),
       /**
@@ -655,7 +655,7 @@ var WindowCovering;
        * write interaction to the Mode attribute, with an unsupported mode bit or any out of bounds bits set, must
        * be ignored and a response containing the status of CONSTRAINT_ERROR will be returned.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.21
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.21
        */
       mode: WritableAttribute(
         23,
@@ -667,7 +667,7 @@ var WindowCovering;
        * movements. By default for nominal operation all flags are cleared (0). A device might support none, one
        * or several bit flags from this attribute (all optional).
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.6.22
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.22
        */
       safetyStatus: OptionalAttribute(26, TlvBitmap(TlvUInt16, WindowCovering2.SafetyStatus))
     },
@@ -700,7 +700,7 @@ var WindowCovering;
        *
        *   • CurrentPositionTilt attribute shall be equal to the InstalledOpenLimitTilt attribute.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.7.1
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.1
        */
       upOrOpen: Command(0, TlvNoArguments, 0, TlvNoResponse),
       /**
@@ -731,7 +731,7 @@ var WindowCovering;
        *
        *   • CurrentPositionTilt attribute shall be equal to the InstalledClosedLimitTilt attribute.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.7.2
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.2
        */
       downOrClose: Command(1, TlvNoArguments, 1, TlvNoResponse),
       /**
@@ -744,7 +744,7 @@ var WindowCovering;
        *   • TargetPositionTiltPercent100ths attribute will be set to CurrentPositionTiltPercent100ths attribute
        *     value.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 5.3.7.3
+       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.3
        */
       stopMotion: Command(2, TlvNoArguments, 2, TlvNoResponse)
     },

package/dist/esm/globals/AtomicAttributeStatus.d.ts

@@ -8,26 +8,26 @@ import { TypeFromSchema } from "../tlv/TlvSchema.js";
 /**
  * This struct indicates the status of an attribute during an atomic write.
  *
- * @see {@link MatterSpecification.v13.Core} § 7.15.5
+ * @see {@link MatterSpecification.v14.Core} § 7.15.5
  */
 export declare const TlvAtomicAttributeStatus: import("../tlv/TlvObject.js").ObjectSchema<{
     /**
      * This field shall indicate the ID of the attribute with the associated StatusCode.
      *
-     * @see {@link MatterSpecification.v13.Core} § 7.15.5.1
+     * @see {@link MatterSpecification.v14.Core} § 7.15.5.1
      */
     attributeId: import("../tlv/TlvObject.js").FieldType<import("../datatype/AttributeId.js").AttributeId>;
     /**
      * This field shall indicate the atomic status of an attribute.
      *
-     * @see {@link MatterSpecification.v13.Core} § 7.15.5.2
+     * @see {@link MatterSpecification.v14.Core} § 7.15.5.2
      */
     statusCode: import("../tlv/TlvObject.js").FieldType<Status>;
 }>;
 /**
  * This struct indicates the status of an attribute during an atomic write.
  *
- * @see {@link MatterSpecification.v13.Core} § 7.15.5
+ * @see {@link MatterSpecification.v14.Core} § 7.15.5
  */
 export interface AtomicAttributeStatus extends TypeFromSchema<typeof TlvAtomicAttributeStatus> {
 }

package/dist/esm/globals/AtomicAttributeStatus.js

@@ -10,13 +10,13 @@ const TlvAtomicAttributeStatus = TlvObject({
   /**
    * This field shall indicate the ID of the attribute with the associated StatusCode.
    *
-   * @see {@link MatterSpecification.v13.Core} § 7.15.5.1
+   * @see {@link MatterSpecification.v14.Core} § 7.15.5.1
    */
   attributeId: TlvField(0, TlvAttributeId),
   /**
    * This field shall indicate the atomic status of an attribute.
    *
-   * @see {@link MatterSpecification.v13.Core} § 7.15.5.2
+   * @see {@link MatterSpecification.v14.Core} § 7.15.5.2
    */
   statusCode: TlvField(1, TlvEnum())
 });

package/dist/esm/globals/AtomicRequestType.d.ts

@@ -5,7 +5,7 @@
  */
 /*** THIS FILE IS GENERATED, DO NOT EDIT ***/
 /**
- * @see {@link MatterSpecification.v13.Core} § 7.15.4
+ * @see {@link MatterSpecification.v14.Core} § 7.15.4
  */
 export declare enum AtomicRequestType {
     /**

package/dist/esm/globals/Locationdesc.d.ts

@@ -9,7 +9,7 @@ import { TypeFromSchema } from "../tlv/TlvSchema.js";
  *
  * This data type shall be represented by the following structure:
  *
- * @see {@link MatterSpecification.v13.Core} § 7.19.2.45
+ * @see {@link MatterSpecification.v14.Core} § 7.19.2.45
  */
 export declare const TlvLocationdesc: import("../tlv/TlvObject.js").ObjectSchema<{
     /**
@@ -19,7 +19,7 @@ export declare const TlvLocationdesc: import("../tlv/TlvObject.js").ObjectSchema
      * synthesized user-friendly, understandable, names for the location, rather than opaque values such as "private" or
      * "2fe7c241-a50a-4863-896e-c5878da5ed68".
      *
-     * @see {@link MatterSpecification.v13.Core} § 7.19.2.45.1
+     * @see {@link MatterSpecification.v14.Core} § 7.19.2.45.1
      */
     locationName: import("../tlv/TlvObject.js").FieldType<string>;
     /**
@@ -49,7 +49,7 @@ export declare const TlvLocationdesc: import("../tlv/TlvObject.js").ObjectSchema
      * Handling complex level situations, such as half levels (side split houses), or the levels from an apartment
      * building, is up to the client and/or user.
      *
-     * @see {@link MatterSpecification.v13.Core} § 7.19.2.45.2
+     * @see {@link MatterSpecification.v14.Core} § 7.19.2.45.2
      */
     floorNumber: import("../tlv/TlvObject.js").FieldType<number | null>;
     /**
@@ -63,7 +63,7 @@ export declare const TlvLocationdesc: import("../tlv/TlvObject.js").ObjectSchema
      * This field only indicates the type of the area. Multiple areas of the same type, such as bedrooms, may exist in a
      * user’s home.
      *
-     * @see {@link MatterSpecification.v13.Core} § 7.19.2.45.3
+     * @see {@link MatterSpecification.v14.Core} § 7.19.2.45.3
      */
     areaType: import("../tlv/TlvObject.js").FieldType<number | null>;
 }>;
@@ -72,7 +72,7 @@ export declare const TlvLocationdesc: import("../tlv/TlvObject.js").ObjectSchema
  *
  * This data type shall be represented by the following structure:
  *
- * @see {@link MatterSpecification.v13.Core} § 7.19.2.45
+ * @see {@link MatterSpecification.v14.Core} § 7.19.2.45
  */
 export interface Locationdesc extends TypeFromSchema<typeof TlvLocationdesc> {
 }

package/dist/esm/globals/Locationdesc.js

@@ -15,7 +15,7 @@ const TlvLocationdesc = TlvObject({
    * synthesized user-friendly, understandable, names for the location, rather than opaque values such as "private" or
    * "2fe7c241-a50a-4863-896e-c5878da5ed68".
    *
-   * @see {@link MatterSpecification.v13.Core} § 7.19.2.45.1
+   * @see {@link MatterSpecification.v14.Core} § 7.19.2.45.1
    */
   locationName: TlvField(0, TlvString.bound({ maxLength: 128 })),
   /**
@@ -45,7 +45,7 @@ const TlvLocationdesc = TlvObject({
    * Handling complex level situations, such as half levels (side split houses), or the levels from an apartment
    * building, is up to the client and/or user.
    *
-   * @see {@link MatterSpecification.v13.Core} § 7.19.2.45.2
+   * @see {@link MatterSpecification.v14.Core} § 7.19.2.45.2
    */
   floorNumber: TlvField(1, TlvNullable(TlvInt16)),
   /**
@@ -59,7 +59,7 @@ const TlvLocationdesc = TlvObject({
    * This field only indicates the type of the area. Multiple areas of the same type, such as bedrooms, may exist in a
    * user’s home.
    *
-   * @see {@link MatterSpecification.v13.Core} § 7.19.2.45.3
+   * @see {@link MatterSpecification.v14.Core} § 7.19.2.45.3
    */
   areaType: TlvField(2, TlvNullable(TlvUInt8))
 });

package/dist/esm/globals/MeasurementAccuracy.d.ts

@@ -9,20 +9,20 @@ import { TypeFromSchema } from "../tlv/TlvSchema.js";
  * This struct represents the set of accuracy ranges for a given measurement, the maximum and minimum values for the
  * measurement, and whether the measurement is directly measured or just estimated from other information.
  *
- * @see {@link MatterSpecification.v13.Cluster} § 2.1.4.4
+ * @see {@link MatterSpecification.v14.Cluster} § 2.1.4.4
  */
 export declare const TlvMeasurementAccuracy: import("../tlv/TlvObject.js").ObjectSchema<{
     /**
      * This field shall indicate the type of measurement for the accuracy provided.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 2.1.4.4.1
+     * @see {@link MatterSpecification.v14.Cluster} § 2.1.4.4.1
      */
     measurementType: import("../tlv/TlvObject.js").FieldType<MeasurementType>;
     /**
      * This field shall indicate whether the associated measurement was directly measured. If this field is not set to
      * true, then the associated measurement was estimated.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 2.1.4.4.2
+     * @see {@link MatterSpecification.v14.Cluster} § 2.1.4.4.2
      */
     measured: import("../tlv/TlvObject.js").FieldType<boolean>;
     minMeasuredValue: import("../tlv/TlvObject.js").FieldType<number | bigint>;
@@ -40,7 +40,7 @@ export declare const TlvMeasurementAccuracy: import("../tlv/TlvObject.js").Objec
      * one more the value of the RangeMax field on the previous MeasurementAccuracyRangeStruct in this list (i.e. there
      * shall be no gaps in the accuracy ranges, and the ranges shall be in increasing order).
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 2.1.4.4.5
+     * @see {@link MatterSpecification.v14.Cluster} § 2.1.4.4.5
      */
     accuracyRanges: import("../tlv/TlvObject.js").FieldType<import("../tlv/TlvObject.js").TypeFromFields<{
         rangeMin: import("../tlv/TlvObject.js").FieldType<number | bigint>;
@@ -57,7 +57,7 @@ export declare const TlvMeasurementAccuracy: import("../tlv/TlvObject.js").Objec
  * This struct represents the set of accuracy ranges for a given measurement, the maximum and minimum values for the
  * measurement, and whether the measurement is directly measured or just estimated from other information.
  *
- * @see {@link MatterSpecification.v13.Cluster} § 2.1.4.4
+ * @see {@link MatterSpecification.v14.Cluster} § 2.1.4.4
  */
 export interface MeasurementAccuracy extends TypeFromSchema<typeof TlvMeasurementAccuracy> {
 }

package/dist/esm/globals/MeasurementAccuracy.js

@@ -12,14 +12,14 @@ const TlvMeasurementAccuracy = TlvObject({
   /**
    * This field shall indicate the type of measurement for the accuracy provided.
    *
-   * @see {@link MatterSpecification.v13.Cluster} § 2.1.4.4.1
+   * @see {@link MatterSpecification.v14.Cluster} § 2.1.4.4.1
    */
   measurementType: TlvField(0, TlvEnum()),
   /**
    * This field shall indicate whether the associated measurement was directly measured. If this field is not set to
    * true, then the associated measurement was estimated.
    *
-   * @see {@link MatterSpecification.v13.Cluster} § 2.1.4.4.2
+   * @see {@link MatterSpecification.v14.Cluster} § 2.1.4.4.2
    */
   measured: TlvField(1, TlvBoolean),
   minMeasuredValue: TlvField(2, TlvInt64),
@@ -37,7 +37,7 @@ const TlvMeasurementAccuracy = TlvObject({
    * one more the value of the RangeMax field on the previous MeasurementAccuracyRangeStruct in this list (i.e. there
    * shall be no gaps in the accuracy ranges, and the ranges shall be in increasing order).
    *
-   * @see {@link MatterSpecification.v13.Cluster} § 2.1.4.4.5
+   * @see {@link MatterSpecification.v14.Cluster} § 2.1.4.4.5
    */
   accuracyRanges: TlvField(4, TlvArray(TlvMeasurementAccuracyRange, { minLength: 1 }))
 });